Andy Lutomirski [Mon, 9 Oct 2017 16:50:49 +0000 (09:50 -0700)]
x86/mm: Flush more aggressively in lazy TLB mode
Since commit:
94b1b03b519b ("x86/mm: Rework lazy TLB mode and TLB freshness tracking")
x86's lazy TLB mode has been all the way lazy: when running a kernel thread
(including the idle thread), the kernel keeps using the last user mm's
page tables without attempting to maintain user TLB coherence at all.
From a pure semantic perspective, this is fine -- kernel threads won't
attempt to access user pages, so having stale TLB entries doesn't matter.
Unfortunately, I forgot about a subtlety. By skipping TLB flushes,
we also allow any paging-structure caches that may exist on the CPU
to become incoherent. This means that we can have a
paging-structure cache entry that references a freed page table, and
the CPU is within its rights to do a speculative page walk starting
at the freed page table.
I can imagine this causing two different problems:
- A speculative page walk starting from a bogus page table could read
IO addresses. I haven't seen any reports of this causing problems.
- A speculative page walk that involves a bogus page table can install
garbage in the TLB. Such garbage would always be at a user VA, but
some AMD CPUs have logic that triggers a machine check when it notices
these bogus entries. I've seen a couple reports of this.
Boris further explains the failure mode:
> It is actually more of an optimization which assumes that paging-structure
> entries are in WB DRAM:
>
> "TlbCacheDis: cacheable memory disable. Read-write. 0=Enables
> performance optimization that assumes PML4, PDP, PDE, and PTE entries
> are in cacheable WB-DRAM; memory type checks may be bypassed, and
> addresses outside of WB-DRAM may result in undefined behavior or NB
> protocol errors. 1=Disables performance optimization and allows PML4,
> PDP, PDE and PTE entries to be in any memory type. Operating systems
> that maintain page tables in memory types other than WB- DRAM must set
> TlbCacheDis to insure proper operation."
>
> The MCE generated is an NB protocol error to signal that
>
> "Link: A specific coherent-only packet from a CPU was issued to an
> IO link. This may be caused by software which addresses page table
> structures in a memory type other than cacheable WB-DRAM without
> properly configuring MSRC001_0015[TlbCacheDis]. This may occur, for
> example, when page table structure addresses are above top of memory. In
> such cases, the NB will generate an MCE if it sees a mismatch between
> the memory operation generated by the core and the link type."
>
> I'm assuming coherent-only packets don't go out on IO links, thus the
> error.
To fix this, reinstate TLB coherence in lazy mode. With this patch
applied, we do it in one of two ways:
- If we have PCID, we simply switch back to init_mm's page tables
when we enter a kernel thread -- this seems to be quite cheap
except for the cost of serializing the CPU.
- If we don't have PCID, then we set a flag and switch to init_mm
the first time we would otherwise need to flush the TLB.
The /sys/kernel/debug/x86/tlb_use_lazy_mode debug switch can be changed
to override the default mode for benchmarking.
In theory, we could optimize this better by only flushing the TLB in
lazy CPUs when a page table is freed. Doing that would require
auditing the mm code to make sure that all page table freeing goes
through tlb_remove_page() as well as reworking some data structures
to implement the improved flush logic.
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Reported-by: Adam Borowski <kilobyte@angband.pl>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Johannes Hirte <johannes.hirte@datenkhaos.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Roman Kagan <rkagan@virtuozzo.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes:
94b1b03b519b ("x86/mm: Rework lazy TLB mode and TLB freshness tracking")
Link: http://lkml.kernel.org/r/20171009170231.fkpraqokz6e4zeco@pd.tnic
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Len Brown [Wed, 11 Oct 2017 21:16:04 +0000 (17:16 -0400)]
x86/apic: Update TSC_DEADLINE quirk with additional SKX stepping
SKX stepping-3 fixed the TSC_DEADLINE issue in a different ucode
version number than stepping-4. Linux needs to know this stepping-3
specific version number to also enable the TSC_DEADLINE on stepping-3.
The steppings and ucode versions are documented in the SKX BIOS update:
https://downloadmirror.intel.com/26978/eng/ReleaseNotes_R00.01.0004.txt
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: peterz@infradead.org
Link: https://lkml.kernel.org/r/60f2bbf7cf617e212b522e663f84225bfebc50e5.1507756305.git.len.brown@intel.com
Paolo Bonzini [Tue, 10 Oct 2017 10:12:57 +0000 (12:12 +0200)]
x86/apic: Silence "FW_BUG TSC_DEADLINE disabled due to Errata" on hypervisors
Commit
594a30fb1242 ("x86/apic: Silence "FW_BUG TSC_DEADLINE disabled
due to Errata" on CPUs without the feature", 2017-08-30) was also about
silencing the warning on VirtualBox; however, KVM does expose the TSC
deadline timer, and it's virtualized so that it is immune from CPU errata.
Therefore, booting 4.13 with "-cpu Haswell" shows this in the logs:
[ 0.000000] [Firmware Bug]: TSC_DEADLINE disabled due to Errata;
please update microcode to version: 0xb2 (or later)
Even if you had a hypervisor that does _not_ virtualize the TSC deadline
and rather exposes the hardware one, it should be the hypervisors task
to update microcode and possibly hide the flag from CPUID. So just
hide the message when running on _any_ hypervisor, not just those that
do not support the TSC deadline timer.
The older check still makes sense, so keep it.
Fixes:
bd9240a18e ("x86/apic: Add TSC_DEADLINE quirk due to errata")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: kvm@vger.kernel.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1507630377-54471-1-git-send-email-pbonzini@redhat.com
Tom Lendacky [Tue, 10 Oct 2017 19:45:04 +0000 (14:45 -0500)]
x86/mm: Disable various instrumentations of mm/mem_encrypt.c and mm/tlb.c
Some routines in mem_encrypt.c are called very early in the boot process,
e.g. sme_enable(). When CONFIG_KCOV=y is defined the resulting code added
to sme_enable() (and others) for KCOV instrumentation results in a kernel
crash. Disable the KCOV instrumentation for mem_encrypt.c by adding
KCOV_INSTRUMENT_mem_encrypt.o := n to arch/x86/mm/Makefile.
In order to avoid other possible early boot issues, model mem_encrypt.c
after head64.c in regards to tools. In addition to disabling KCOV as
stated above and a previous patch that disables branch profiling, also
remove the "-pg" CFLAG if CONFIG_FUNCTION_TRACER is enabled and set
KASAN_SANITIZE to "n", each of which are done on a file basis.
Reported-by: kernel test robot <lkp@01.org>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20171010194504.18887.38053.stgit@tlendack-t1.amdoffice.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Marcelo Henrique Cerri [Thu, 5 Oct 2017 13:34:29 +0000 (10:34 -0300)]
x86/hyperv: Fix hypercalls with extended CPU ranges for TLB flushing
Do not consider the fixed size of hv_vp_set when passing the variable
header size to hv_do_rep_hypercall().
The Hyper-V hypervisor specification states that for a hypercall with a
variable header only the size of the variable portion should be supplied
via the input control.
For HVCALL_FLUSH_VIRTUAL_ADDRESS_SPACE_EX/LIST_EX calls that means the
fixed portion of hv_vp_set should not be considered.
That fixes random failures of some applications that are unexpectedly
killed with SIGBUS or SIGSEGV.
Signed-off-by: Marcelo Henrique Cerri <marcelo.cerri@canonical.com>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Jork Loeser <Jork.Loeser@microsoft.com>
Cc: Josh Poulson <jopoulso@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Xiao <sixiao@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: devel@linuxdriverproject.org
Fixes:
628f54cc6451 ("x86/hyper-v: Support extended CPU ranges for TLB flush hypercalls")
Link: http://lkml.kernel.org/r/1507210469-29065-1-git-send-email-marcelo.cerri@canonical.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Vitaly Kuznetsov [Thu, 5 Oct 2017 11:39:24 +0000 (13:39 +0200)]
x86/hyperv: Don't use percpu areas for pcpu_flush/pcpu_flush_ex structures
hv_do_hypercall() does virt_to_phys() translation and with some configs
(CONFIG_SLAB) this doesn't work for percpu areas, we pass wrong memory to
hypervisor and get #GP. We could use working slow_virt_to_phys() instead
but doing so kills the performance.
Move pcpu_flush/pcpu_flush_ex structures out of percpu areas and
allocate memory on first call. The additional level of indirection gives
us a small performance penalty, in future we may consider introducing
hypercall functions which avoid virt_to_phys() conversion and cache
physical addresses of pcpu_flush/pcpu_flush_ex structures somewhere.
Reported-by: Simon Xiao <sixiao@microsoft.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Jork Loeser <Jork.Loeser@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: devel@linuxdriverproject.org
Link: http://lkml.kernel.org/r/20171005113924.28021-1-vkuznets@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Vitaly Kuznetsov [Fri, 6 Oct 2017 15:48:54 +0000 (17:48 +0200)]
x86/hyperv: Clear vCPU banks between calls to avoid flushing unneeded vCPUs
hv_flush_pcpu_ex structures are not cleared between calls for performance
reasons (they're variable size up to PAGE_SIZE each) but we must clear
hv_vp_set.bank_contents part of it to avoid flushing unneeded vCPUs. The
rest of the structure is formed correctly.
To do the clearing in an efficient way stash the maximum possible vCPU
number (this may differ from Linux CPU id).
Reported-by: Jork Loeser <Jork.Loeser@microsoft.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: devel@linuxdriverproject.org
Link: http://lkml.kernel.org/r/20171006154854.18092-1-vkuznets@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Josh Poimboeuf [Tue, 10 Oct 2017 01:20:05 +0000 (20:20 -0500)]
x86/unwind: Disable unwinder warnings on 32-bit
x86-32 doesn't have stack validation, so in most cases it doesn't make
sense to warn about bad frame pointers.
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: LKP <lkp@01.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/a69658760800bf281e6353248c23e0fa0acf5230.1507597785.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Josh Poimboeuf [Tue, 10 Oct 2017 01:20:04 +0000 (20:20 -0500)]
x86/unwind: Align stack pointer in unwinder dump
When printing the unwinder dump, the stack pointer could be unaligned,
for one of two reasons:
- stack corruption; or
- GCC created an unaligned stack.
There's no way for the unwinder to tell the difference between the two,
so we have to assume one or the other. GCC unaligned stacks are very
rare, and have only been spotted before GCC 5. Presumably, if we're
doing an unwinder stack dump, stack corruption is more likely than a
GCC unaligned stack. So always align the stack before starting the
dump.
Reported-and-tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-and-tested-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: LKP <lkp@01.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/2f540c515946ab09ed267e1a1d6421202a0cce08.1507597785.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Josh Poimboeuf [Tue, 10 Oct 2017 01:20:03 +0000 (20:20 -0500)]
x86/unwind: Use MSB for frame pointer encoding on 32-bit
On x86-32, Tetsuo Handa and Fengguang Wu reported unwinder warnings
like:
WARNING: kernel stack regs at
f60bb9c8 in swapper:1 has bad 'bp' value
0ba00000
And also there were some stack dumps with a bunch of unreliable '?'
symbols after an apic_timer_interrupt symbol, meaning the unwinder got
confused when it tried to read the regs.
The cause of those issues is that, with GCC 4.8 (and possibly older),
there are cases where GCC misaligns the stack pointer in a leaf function
for no apparent reason:
c124a388 <acpi_rs_move_data>:
c124a388: 55 push %ebp
c124a389: 89 e5 mov %esp,%ebp
c124a38b: 57 push %edi
c124a38c: 56 push %esi
c124a38d: 89 d6 mov %edx,%esi
c124a38f: 53 push %ebx
c124a390: 31 db xor %ebx,%ebx
c124a392: 83 ec 03 sub $0x3,%esp
...
c124a3e3: 83 c4 03 add $0x3,%esp
c124a3e6: 5b pop %ebx
c124a3e7: 5e pop %esi
c124a3e8: 5f pop %edi
c124a3e9: 5d pop %ebp
c124a3ea: c3 ret
If an interrupt occurs in such a function, the regs on the stack will be
unaligned, which breaks the frame pointer encoding assumption. So on
32-bit, use the MSB instead of the LSB to encode the regs.
This isn't an issue on 64-bit, because interrupts align the stack before
writing to it.
Reported-and-tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-and-tested-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: LKP <lkp@01.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/279a26996a482ca716605c7dbc7f2db9d8d91e81.1507597785.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Josh Poimboeuf [Tue, 10 Oct 2017 01:20:02 +0000 (20:20 -0500)]
x86/unwind: Fix dereference of untrusted pointer
Tetsuo Handa and Fengguang Wu reported a panic in the unwinder:
BUG: unable to handle kernel NULL pointer dereference at
000001f2
IP: update_stack_state+0xd4/0x340
*pde =
00000000
Oops: 0000 [#1] PREEMPT SMP
CPU: 0 PID: 18728 Comm: 01-cpu-hotplug Not tainted
4.13.0-rc4-00170-gb09be67 #592
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-20161025_171302-gandalf 04/01/2014
task:
bb0b53c0 task.stack:
bb3ac000
EIP: update_stack_state+0xd4/0x340
EFLAGS:
00010002 CPU: 0
EAX:
0000a570 EBX:
bb3adccb ECX:
0000f401 EDX:
0000a570
ESI:
00000001 EDI:
000001ba EBP:
bb3adc6b ESP:
bb3adc3f
DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
CR0:
80050033 CR2:
000001f2 CR3:
0b3a7000 CR4:
00140690
DR0:
00000000 DR1:
00000000 DR2:
00000000 DR3:
00000000
DR6:
fffe0ff0 DR7:
00000400
Call Trace:
? unwind_next_frame+0xea/0x400
? __unwind_start+0xf5/0x180
? __save_stack_trace+0x81/0x160
? save_stack_trace+0x20/0x30
? __lock_acquire+0xfa5/0x12f0
? lock_acquire+0x1c2/0x230
? tick_periodic+0x3a/0xf0
? _raw_spin_lock+0x42/0x50
? tick_periodic+0x3a/0xf0
? tick_periodic+0x3a/0xf0
? debug_smp_processor_id+0x12/0x20
? tick_handle_periodic+0x23/0xc0
? local_apic_timer_interrupt+0x63/0x70
? smp_trace_apic_timer_interrupt+0x235/0x6a0
? trace_apic_timer_interrupt+0x37/0x3c
? strrchr+0x23/0x50
Code: 0f 95 c1 89 c7 89 45 e4 0f b6 c1 89 c6 89 45 dc 8b 04 85 98 cb 74 bc 88 4d e3 89 45 f0 83 c0 01 84 c9 89 04 b5 98 cb 74 bc 74 3b <8b> 47 38 8b 57 34 c6 43 1d 01 25 00 00 02 00 83 e2 03 09 d0 83
EIP: update_stack_state+0xd4/0x340 SS:ESP: 0068:
bb3adc3f
CR2:
00000000000001f2
---[ end trace
0d147fd4aba8ff50 ]---
Kernel panic - not syncing: Fatal exception in interrupt
On x86-32, after decoding a frame pointer to get a regs address,
regs_size() dereferences the regs pointer when it checks regs->cs to see
if the regs are user mode. This is dangerous because it's possible that
what looks like a decoded frame pointer is actually a corrupt value, and
we don't want the unwinder to make things worse.
Instead of calling regs_size() on an unsafe pointer, just assume they're
kernel regs to start with. Later, once it's safe to access the regs, we
can do the user mode check and corresponding safety check for the
remaining two regs.
Reported-and-tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-and-tested-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: LKP <lkp@01.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes:
5ed8d8bb38c5 ("x86/unwind: Move common code into update_stack_state()")
Link: http://lkml.kernel.org/r/7f95b9a6993dec7674b3f3ab3dcd3294f7b9644d.1507597785.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Mathias Krause [Thu, 5 Oct 2017 18:30:12 +0000 (20:30 +0200)]
x86/alternatives: Fix alt_max_short macro to really be a max()
The alt_max_short() macro in asm/alternative.h does not work as
intended, leading to nasty bugs. E.g. alt_max_short("1", "3")
evaluates to 3, but alt_max_short("3", "1") evaluates to 1 -- not
exactly the maximum of 1 and 3.
In fact, I had to learn it the hard way by crashing my kernel in not
so funny ways by attempting to make use of the ALTENATIVE_2 macro
with alternatives where the first one was larger than the second
one.
According to [1] and commit
dbe4058a6a44 ("x86/alternatives: Fix
ALTERNATIVE_2 padding generation properly") the right handed side
should read "-(-(a < b))" not "-(-(a - b))". Fix that, to make the
macro work as intended.
While at it, fix up the comments regarding the additional "-", too.
It's not about gas' usage of s32 but brain dead logic of having a
"true" value of -1 for the < operator ... *sigh*
Btw., the one in asm/alternative-asm.h is correct. And, apparently,
all current users of ALTERNATIVE_2() pass same sized alternatives,
avoiding to hit the bug.
[1] http://graphics.stanford.edu/~seander/bithacks.html#IntegerMinOrMax
Reviewed-and-tested-by: Borislav Petkov <bp@suse.de>
Fixes:
dbe4058a6a44 ("x86/alternatives: Fix ALTERNATIVE_2 padding generation properly")
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1507228213-13095-1-git-send-email-minipli@googlemail.com
Andy Lutomirski [Mon, 9 Oct 2017 04:53:05 +0000 (21:53 -0700)]
x86/mm/64: Fix reboot interaction with CR4.PCIDE
Trying to reboot via real mode fails with PCID on: long mode cannot
be exited while CR4.PCIDE is set. (No, I have no idea why, but the
SDM and actual CPUs are in agreement here.) The result is a GPF and
a hang instead of a reboot.
I didn't catch this in testing because neither my computer nor my VM
reboots this way. I can trigger it with reboot=bios, though.
Fixes:
660da7c9228f ("x86/mm: Enable CR4.PCIDE on supported systems")
Reported-and-tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Link: https://lkml.kernel.org/r/f1e7d965998018450a7a70c2823873686a8b21c0.1507524746.git.luto@kernel.org
Masami Hiramatsu [Tue, 3 Oct 2017 07:18:02 +0000 (16:18 +0900)]
kprobes/x86: Remove IRQ disabling from jprobe handlers
Jprobes actually don't need to disable IRQs while calling
handlers, because of how we specify the kernel interface in
Documentation/kprobes.txt:
-----
Probe handlers are run with preemption disabled. Depending on the
architecture and optimization state, handlers may also run with
interrupts disabled (e.g., kretprobe handlers and optimized kprobe
handlers run without interrupt disabled on x86/x86-64).
-----
So let's remove IRQ disabling from jprobes too.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E . McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/150701508194.32266.14458959863314097305.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Josh Poimboeuf [Tue, 3 Oct 2017 13:51:43 +0000 (08:51 -0500)]
kprobes/x86: Set up frame pointer in kprobe trampoline
Richard Weinberger saw an unwinder warning when running bcc's opensnoop:
WARNING: kernel stack frame pointer at
ffff99ef4076bea0 in opensnoop:2008 has bad value
0000000000000008
unwind stack type:0 next_sp: (null) mask:0x2 graph_idx:0
...
ffff99ef4076be88:
ffff99ef4076bea0 (0xffff99ef4076bea0)
ffff99ef4076be90:
ffffffffac442721 (optimized_callback +0x81/0x90)
...
A lockdep stack trace was initiated from inside a kprobe handler, when
the unwinder noticed a bad frame pointer on the stack. The bad frame
pointer is related to the fact that the kprobe optprobe trampoline
doesn't save the frame pointer before calling into optimized_callback().
Reported-and-tested-by: Richard Weinberger <richard@sigma-star.at>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S . Miller <davem@davemloft.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/7aef2f8ecd75c2f505ef9b80490412262cf4a44c.1507038547.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Linus Torvalds [Sun, 1 Oct 2017 21:54:54 +0000 (14:54 -0700)]
Linux 4.14-rc3
Linus Torvalds [Sun, 1 Oct 2017 20:55:32 +0000 (13:55 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"This contains the following fixes and improvements:
- Avoid dereferencing an unprotected VMA pointer in the fault signal
generation code
- Fix inline asm call constraints for GCC 4.4
- Use existing register variable to retrieve the stack pointer
instead of forcing the compiler to create another indirect access
which results in excessive extra 'mov %rsp, %<dst>' instructions
- Disable branch profiling for the memory encryption code to prevent
an early boot crash
- Fix a sparse warning caused by casting the __user annotation in
__get_user_asm_u64() away
- Fix an off by one error in the loop termination of the error patch
in the x86 sysfs init code
- Add missing CPU IDs to various Intel specific drivers to enable the
functionality on recent hardware
- More (init) constification in the numachip code"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm: Use register variable to get stack pointer value
x86/mm: Disable branch profiling in mem_encrypt.c
x86/asm: Fix inline asm call constraints for GCC 4.4
perf/x86/intel/uncore: Correct num_boxes for IIO and IRP
perf/x86/intel/rapl: Add missing CPU IDs
perf/x86/msr: Add missing CPU IDs
perf/x86/intel/cstate: Add missing CPU IDs
x86: Don't cast away the __user in __get_user_asm_u64()
x86/sysfs: Fix off-by-one error in loop termination
x86/mm: Fix fault error path using unsafe vma pointer
x86/numachip: Add const and __initconst to numachip2_clockevent
Linus Torvalds [Sun, 1 Oct 2017 20:03:16 +0000 (13:03 -0700)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"This adds a new timer wheel function which is required for the
conversion of the timer callback function from the 'unsigned long
data' argument to 'struct timer_list *timer'. This conversion has two
benefits:
1) It makes struct timer_list smaller
2) Many callers hand in a pointer to the timer or to the structure
containing the timer, which happens via type casting both at setup
and in the callback. This change gets rid of the typecasts.
Once the conversion is complete, which is planned for 4.15, the old
setup function and the intermediate typecast in the new setup function
go away along with the data field in struct timer_list.
Merging this now into mainline allows a smooth queueing of the actual
conversion in the affected maintainer trees without creating
dependencies"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
um/time: Fixup namespace collision
timer: Prepare to change timer callback argument type
Linus Torvalds [Sun, 1 Oct 2017 19:34:42 +0000 (12:34 -0700)]
Merge branch 'smp-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull smp/hotplug fixes from Thomas Gleixner:
"This addresses the fallout of the new lockdep mechanism which covers
completions in the CPU hotplug code.
The lockdep splats are false positives, but there is no way to
annotate that reliably. The solution is to split the completions for
CPU up and down, which requires some reshuffling of the failure
rollback handling as well"
* 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
smp/hotplug: Hotplug state fail injection
smp/hotplug: Differentiate the AP completion between up and down
smp/hotplug: Differentiate the AP-work lockdep class between up and down
smp/hotplug: Callback vs state-machine consistency
smp/hotplug: Rewrite AP state machine core
smp/hotplug: Allow external multi-instance rollback
smp/hotplug: Add state diagram
Linus Torvalds [Sun, 1 Oct 2017 19:10:02 +0000 (12:10 -0700)]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
"The scheduler pull request comes with the following updates:
- Prevent a divide by zero issue by validating the input value of
sysctl_sched_time_avg
- Make task state printing consistent all over the place and have
explicit state characters for IDLE and PARKED so they wont be
displayed as 'D' state which confuses tools"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/sysctl: Check user input value of sysctl_sched_time_avg
sched/debug: Add explicit TASK_PARKED printing
sched/debug: Ignore TASK_IDLE for SysRq-W
sched/debug: Add explicit TASK_IDLE printing
sched/tracing: Use common task-state helpers
sched/tracing: Fix trace_sched_switch task-state printing
sched/debug: Remove unused variable
sched/debug: Convert TASK_state to hex
sched/debug: Implement consistent task-state printing
Linus Torvalds [Sun, 1 Oct 2017 19:06:31 +0000 (12:06 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
- Prevent a division by zero in the perf aux buffer handling
- Sync kernel headers with perf tool headers
- Fix a build failure in the syscalltbl code
- Make the debug messages of perf report --call-graph work correctly
- Make sure that all required perf files are in the MANIFEST for
container builds
- Fix the atrr.exclude kernel handling so it respects the
perf_event_paranoid and the user permissions
- Make perf test on s390x work correctly
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/aux: Only update ->aux_wakeup in non-overwrite mode
perf test: Fix vmlinux failure on s390x part 2
perf test: Fix vmlinux failure on s390x
perf tools: Fix syscalltbl build failure
perf report: Fix debug messages with --call-graph option
perf evsel: Fix attr.exclude_kernel setting for default cycles:p
tools include: Sync kernel ABI headers with tooling headers
perf tools: Get all of tools/{arch,include}/ in the MANIFEST
Linus Torvalds [Sun, 1 Oct 2017 19:02:47 +0000 (12:02 -0700)]
Merge branch 'locking-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"Two fixes for locking:
- Plug a hole the pi_stat->owner serialization which was changed
recently and failed to fixup two usage sites.
- Prevent reordering of the rwsem_has_spinner() check vs the
decrement of rwsem count in up_write() which causes a missed
wakeup"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rwsem-xadd: Fix missed wakeup due to reordering of load
futex: Fix pi_state->owner serialization
Linus Torvalds [Sun, 1 Oct 2017 19:00:56 +0000 (12:00 -0700)]
Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
- Add a missing NULL pointer check in free_irq()
- Fix a memory leak/memory corruption in the generic irq chip
- Add missing rcu annotations for radix tree access
- Use ffs instead of fls when extracting data from a chip register in
the MIPS GIC irq driver
- Fix the unmasking of IPI interrupts in the MIPS GIC driver so they
end up at the target CPU and not at CPU0
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irq/generic-chip: Don't replace domain's name
irqdomain: Add __rcu annotations to radix tree accessors
irqchip/mips-gic: Use effective affinity to unmask
irqchip/mips-gic: Fix shifts to extract register fields
genirq: Check __free_irq() return value for NULL
Linus Torvalds [Sun, 1 Oct 2017 18:12:29 +0000 (11:12 -0700)]
Merge branch 'core-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull objtool fixes from Thomas Gleixner:
"Two small fixes for objtool:
- Support frame pointer setup via 'lea (%rsp), %rbp' which was not
yet supported and caused build warnings
- Disable unreacahble warnings for GCC4.4 and older to avoid false
positives caused by the compiler itself"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Support unoptimized frame pointer setup
objtool: Skip unreachable warnings for GCC 4.4 and older
Linus Torvalds [Sat, 30 Sep 2017 19:52:32 +0000 (12:52 -0700)]
Merge tag 'mtd/fixes-for-4.14-rc3' of git://git.infradead.org/linux-mtd
Pull mtd fixes from Boris Brezillon:
- Fix partition alignment check in mtdcore.c
- Fix a buffer overflow in the Atmel NAND driver
* tag 'mtd/fixes-for-4.14-rc3' of git://git.infradead.org/linux-mtd:
mtd: nand: atmel: fix buffer overflow in atmel_pmecc_user
mtd: Fix partition alignment check on multi-erasesize devices
Linus Torvalds [Sat, 30 Sep 2017 19:50:56 +0000 (12:50 -0700)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Eight mostly minor fixes for recently discovered issues in drivers"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ILLEGAL REQUEST + ASC==27 => target failure
scsi: aacraid: Add a small delay after IOP reset
scsi: scsi_transport_fc: Also check for NOTPRESENT in fc_remote_port_add()
scsi: scsi_transport_fc: set scsi_target_id upon rescan
scsi: scsi_transport_iscsi: fix the issue that iscsi_if_rx doesn't parse nlmsg properly
scsi: aacraid: error: testing array offset 'bus' after use
scsi: lpfc: Don't return internal MBXERR_ERROR code from probe function
scsi: aacraid: Fix 2T+ drives on SmartIOC-2000
Linus Torvalds [Sat, 30 Sep 2017 02:35:41 +0000 (19:35 -0700)]
Merge tag 'platform-drivers-x86-v4.14-2' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform drivers fix from Darren Hart:
"Newly discovered species of fujitsu laptops break some assumptions
about ACPI device pairings.
fujitsu-laptop: Don't oops when FUJ02E3 is not present"
* tag 'platform-drivers-x86-v4.14-2' of git://git.infradead.org/linux-platform-drivers-x86:
platform/x86: fujitsu-laptop: Don't oops when FUJ02E3 is not presnt
Linus Torvalds [Sat, 30 Sep 2017 02:33:32 +0000 (19:33 -0700)]
Merge tag 'led_fixes-4.14-rc3' of git://git./linux/kernel/git/j.anaszewski/linux-leds
Pull LED fixes from Jacek Anaszewski:
"Four fixes for the as3645a LED flash controller and one update to
MAINTAINERS"
* tag 'led_fixes-4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
MAINTAINERS: Add entry for MediaTek PMIC LED driver
as3645a: Unregister indicator LED on device unbind
as3645a: Use integer numbers for parsing LEDs
dt: bindings: as3645a: Use LED number to refer to LEDs
as3645a: Use ams,input-max-microamp as documented in DT bindings
Linus Torvalds [Fri, 29 Sep 2017 19:59:59 +0000 (12:59 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs
Pull waitid fix from Al Viro:
"Fix infoleak in waitid()"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix infoleak in waitid(2)
Linus Torvalds [Fri, 29 Sep 2017 19:57:35 +0000 (12:57 -0700)]
Merge branch 'for-4.14-rc3' of git://git./linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"We've collected a bunch of isolated fixes, for crashes, user-visible
behaviour or missing bits from other subsystem cleanups from the past.
The overall number is not small but I was not able to make it
significantly smaller. Most of the patches are supposed to go to
stable"
* 'for-4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: log csums for all modified extents
Btrfs: fix unexpected result when dio reading corrupted blocks
btrfs: Report error on removing qgroup if del_qgroup_item fails
Btrfs: skip checksum when reading compressed data if some IO have failed
Btrfs: fix kernel oops while reading compressed data
Btrfs: use btrfs_op instead of bio_op in __btrfs_map_block
Btrfs: do not backup tree roots when fsync
btrfs: remove BTRFS_FS_QUOTA_DISABLING flag
btrfs: propagate error to btrfs_cmp_data_prepare caller
btrfs: prevent to set invalid default subvolid
Btrfs: send: fix error number for unknown inode types
btrfs: fix NULL pointer dereference from free_reloc_roots()
btrfs: finish ordered extent cleaning if no progress is found
btrfs: clear ordered flag on cleaning up ordered extents
Btrfs: fix incorrect {node,sector}size endianness from BTRFS_IOC_FS_INFO
Btrfs: do not reset bio->bi_ops while writing bio
Btrfs: use the new helper wbc_to_write_flags
Linus Torvalds [Fri, 29 Sep 2017 19:55:33 +0000 (12:55 -0700)]
Merge tag 'md/4.14-rc3' of git://git./linux/kernel/git/shli/md
Pull MD fixes from Shaohua Li:
"A few fixes for MD. Mainly fix a problem introduced in 4.13, which we
retry bio for some code paths but not all in some situations"
* tag 'md/4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
md/raid5: cap worker count
dm-raid: fix a race condition in request handling
md: fix a race condition for flush request handling
md: separate request handling
Linus Torvalds [Fri, 29 Sep 2017 19:46:13 +0000 (12:46 -0700)]
Merge tag 'pci-v4.14-fixes-3' of git://git./linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- fix CONFIG_PCI=n build error (introduced in v4.14-rc1) (Geert
Uytterhoeven)
- fix a race in sysfs driver_override store/show (Nicolai Stange)
* tag 'pci-v4.14-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: Fix race condition with driver_override
PCI: Add dummy pci_acs_enabled() for CONFIG_PCI=n build
Linus Torvalds [Fri, 29 Sep 2017 19:43:36 +0000 (12:43 -0700)]
Merge tag 'drm-fixes-for-v4.14-rc3' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Regular fixes pull, some amdkfd, amdgpu, etnaviv, sun4i, qxl, tegra
fixes.
I've got an outstanding pull for i915 but it wasn't on an rc2 base so
I wanted to ship these out first, I might get to it before rc3 or I
might not"
* tag 'drm-fixes-for-v4.14-rc3' of git://people.freedesktop.org/~airlied/linux:
drm/tegra: trace: Fix path to include
qxl: fix framebuffer unpinning
drm/sun4i: cec: Enable back CEC-pin framework
drm/amdkfd: Print event limit messages only once per process
drm/amdkfd: Fix kernel-queue wrapping bugs
drm/amdkfd: Fix incorrect destroy_mqd parameter
drm/radeon: disable hard reset in hibernate for APUs
drm/amdgpu: revert tile table update for oland
etnaviv: fix gem object list corruption
etnaviv: fix submit error path
qxl: fix primary surface handling
drm/amdkfd: check for null dev to avoid a null pointer dereference
Linus Torvalds [Fri, 29 Sep 2017 19:37:07 +0000 (12:37 -0700)]
Merge tag 'iommu-fixes-v4.14-rc2' of git://git./linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
- A comment fix for 'struct iommu_ops'
- Format string fixes for AMD IOMMU, unfortunatly I missed that during
review.
- Limit mediatek physical addresses to 32 bit for v7s to fix a warning
triggered in io-page-table code.
- Fix dma-sync in io-pgtable-arm-v7s code
* tag 'iommu-fixes-v4.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu: Fix comment for iommu_ops.map_sg
iommu/amd: pr_err() strings should end with newlines
iommu/mediatek: Limit the physical address in 32bit for v7s
iommu/io-pgtable-arm-v7s: Need dma-sync while there is no QUIRK_NO_DMA
Linus Torvalds [Fri, 29 Sep 2017 19:31:35 +0000 (12:31 -0700)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- SPsel register initialisation on reset as the architecture defines
its state as unknown
- Use READ_ONCE when dereferencing pmd_t pointers to avoid race
conditions in page_vma_mapped_walk() (or fast GUP) with concurrent
modifications of the page table
- Avoid invoking the mm fault handling code for kernel addresses (check
against TASK_SIZE) which would otherwise result in calling
might_sleep() in atomic context
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: fault: Route pte translation faults via do_translation_fault
arm64: mm: Use READ_ONCE when dereferencing pointer to pte table
arm64: Make sure SPsel is always set
Linus Torvalds [Fri, 29 Sep 2017 19:24:28 +0000 (12:24 -0700)]
Merge tag 'for-linus-4.14c-rc3-tag' of git://git./linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- avoid a warning when compiling with clang
- consider read-only bits in xen-pciback when writing to a BAR
- fix a boot crash of pv-domains
* tag 'for-linus-4.14c-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/mmu: Call xen_cleanhighmap() with 4MB aligned for page tables mapping
xen-pciback: relax BAR sizing write value check
x86/xen: clean up clang build warning
Linus Torvalds [Fri, 29 Sep 2017 19:18:55 +0000 (12:18 -0700)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Mixed bugfixes. Perhaps the most interesting one is a latent bug that
was finally triggered by PCID support"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm/x86: Handle async PF in RCU read-side critical sections
KVM: nVMX: Fix nested #PF intends to break L1's vmlauch/vmresume
KVM: VMX: use cmpxchg64
KVM: VMX: simplify and fix vmx_vcpu_pi_load
KVM: VMX: avoid double list add with VT-d posted interrupts
KVM: VMX: extract __pi_post_block
KVM: PPC: Book3S HV: Check for updated HDSISR on P9 HDSI exception
KVM: nVMX: fix HOST_CR3/HOST_CR4 cache
Al Viro [Fri, 29 Sep 2017 17:43:15 +0000 (13:43 -0400)]
fix infoleak in waitid(2)
kernel_waitid() can return a PID, an error or 0. rusage is filled in the first
case and waitid(2) rusage should've been copied out exactly in that case, *not*
whenever kernel_waitid() has not returned an error. Compat variant shares that
braino; none of kernel_wait4() callers do, so the below ought to fix it.
Reported-and-tested-by: Alexander Potapenko <glider@google.com>
Fixes:
ce72a16fa705 ("wait4(2)/waitid(2): separate copying rusage to userland")
Cc: stable@vger.kernel.org # v4.13
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Andrey Ryabinin [Fri, 29 Sep 2017 14:15:36 +0000 (17:15 +0300)]
x86/asm: Use register variable to get stack pointer value
Currently we use current_stack_pointer() function to get the value
of the stack pointer register. Since commit:
f5caf621ee35 ("x86/asm: Fix inline asm call constraints for Clang")
... we have a stack register variable declared. It can be used instead of
current_stack_pointer() function which allows to optimize away some
excessive "mov %rsp, %<dst>" instructions:
-mov %rsp,%rdx
-sub %rdx,%rax
-cmp $0x3fff,%rax
-ja
ffffffff810722fd <ist_begin_non_atomic+0x2d>
+sub %rsp,%rax
+cmp $0x3fff,%rax
+ja
ffffffff810722fa <ist_begin_non_atomic+0x2a>
Remove current_stack_pointer(), rename __asm_call_sp to current_stack_pointer
and use it instead of the removed function.
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170929141537.29167-1-aryabinin@virtuozzo.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tom Lendacky [Fri, 29 Sep 2017 16:24:19 +0000 (11:24 -0500)]
x86/mm: Disable branch profiling in mem_encrypt.c
Some routines in mem_encrypt.c are called very early in the boot process,
e.g. sme_encrypt_kernel(). When CONFIG_TRACE_BRANCH_PROFILING=y is defined
the resulting branch profiling associated with the check to see if SME is
active results in a kernel crash. Disable branch profiling for
mem_encrypt.c by defining DISABLE_BRANCH_PROFILING before including any
header files.
Reported-by: kernel test robot <lkp@01.org>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Borislav Petkov <bp@suse.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170929162419.6016.53390.stgit@tlendack-t1.amdoffice.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Fri, 29 Sep 2017 17:31:46 +0000 (19:31 +0200)]
Merge tag 'perf-urgent-for-mingo-4.14-
20170928' of git://git./linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
- Fix syscalltbl build failure (Akemi Yagi)
- Fix attr.exclude_kernel setting for default cycles:p, this time for
!root with kernel.perf_event_paranoid = -1 (Arnaldo Carvalho de Melo)
- Sync kernel ABI headers with tooling headers (Ingo Molnar)
- Remove misleading debug messages with --call-graph option (Mengting Zhang)
- Revert vmlinux symbol resolution patches for s390x (Thomas Richter)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Linus Torvalds [Fri, 29 Sep 2017 17:26:35 +0000 (10:26 -0700)]
Merge branch 'fixes-v4.14-rc3' of git://git./linux/kernel/git/jmorris/linux-security
Pull keys fixes from James Morris:
"Notable here is a rewrite of big_key crypto by Jason Donenfeld to
address some issues in the original code.
From Jason's commit log:
"This started out as just replacing the use of crypto/rng with
get_random_bytes_wait, so that we wouldn't use bad randomness at
boot time. But, upon looking further, it appears that there were
even deeper underlying cryptographic problems, and that this seems
to have been committed with very little crypto review. So, I rewrote
the whole thing, trying to keep to the conventions introduced by the
previous author, to fix these cryptographic flaws."
There has been positive review of the new code by Eric Biggers and
Herbert Xu, and it passes basic testing via the keyutils test suite.
Eric also manually tested it.
Generally speaking, we likely need to improve the amount of crypto
review for kernel crypto users including keys (I'll post a note
separately to ksummit-discuss)"
* 'fixes-v4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
security/keys: rewrite all of big_key crypto
security/keys: properly zero out sensitive key material in big_key
KEYS: use kmemdup() in request_key_auth_new()
KEYS: restrict /proc/keys by credentials at open time
KEYS: reset parent each time before searching key_user_tree
KEYS: prevent KEYCTL_READ on negative key
KEYS: prevent creating a different user's keyrings
KEYS: fix writing past end of user-supplied buffer in keyring_read()
KEYS: fix key refcount leak in keyctl_read_key()
KEYS: fix key refcount leak in keyctl_assume_authority()
KEYS: don't revoke uninstantiated key in request_key_auth_new()
KEYS: fix cred refcount leak in request_key_auth_new()
Will Deacon [Fri, 29 Sep 2017 11:27:41 +0000 (12:27 +0100)]
arm64: fault: Route pte translation faults via do_translation_fault
We currently route pte translation faults via do_page_fault, which elides
the address check against TASK_SIZE before invoking the mm fault handling
code. However, this can cause issues with the path walking code in
conjunction with our word-at-a-time implementation because
load_unaligned_zeropad can end up faulting in kernel space if it reads
across a page boundary and runs into a page fault (e.g. by attempting to
read from a guard region).
In the case of such a fault, load_unaligned_zeropad has registered a
fixup to shift the valid data and pad with zeroes, however the abort is
reported as a level 3 translation fault and we dispatch it straight to
do_page_fault, despite it being a kernel address. This results in calling
a sleeping function from atomic context:
BUG: sleeping function called from invalid context at arch/arm64/mm/fault.c:313
in_atomic(): 0, irqs_disabled(): 0, pid: 10290
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[...]
[<
ffffff8e016cd0cc>] ___might_sleep+0x134/0x144
[<
ffffff8e016cd158>] __might_sleep+0x7c/0x8c
[<
ffffff8e016977f0>] do_page_fault+0x140/0x330
[<
ffffff8e01681328>] do_mem_abort+0x54/0xb0
Exception stack(0xfffffffb20247a70 to 0xfffffffb20247ba0)
[...]
[<
ffffff8e016844fc>] el1_da+0x18/0x78
[<
ffffff8e017f399c>] path_parentat+0x44/0x88
[<
ffffff8e017f4c9c>] filename_parentat+0x5c/0xd8
[<
ffffff8e017f5044>] filename_create+0x4c/0x128
[<
ffffff8e017f59e4>] SyS_mkdirat+0x50/0xc8
[<
ffffff8e01684e30>] el0_svc_naked+0x24/0x28
Code:
36380080 d5384100 f9400800 9402566d (
d4210000)
---[ end trace
2d01889f2bca9b9f ]---
Fix this by dispatching all translation faults to do_translation_faults,
which avoids invoking the page fault logic for faults on kernel addresses.
Cc: <stable@vger.kernel.org>
Reported-by: Ankit Jain <ankijain@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Will Deacon [Fri, 29 Sep 2017 10:29:55 +0000 (11:29 +0100)]
arm64: mm: Use READ_ONCE when dereferencing pointer to pte table
On kernels built with support for transparent huge pages, different CPUs
can access the PMD concurrently due to e.g. fast GUP or page_vma_mapped_walk
and they must take care to use READ_ONCE to avoid value tearing or caching
of stale values by the compiler. Unfortunately, these functions call into
our pgtable macros, which don't use READ_ONCE, and compiler caching has
been observed to cause the following crash during ext4 writeback:
PC is at check_pte+0x20/0x170
LR is at page_vma_mapped_walk+0x2e0/0x540
[...]
Process doio (pid: 2463, stack limit = 0xffff00000f2e8000)
Call trace:
[<
ffff000008233328>] check_pte+0x20/0x170
[<
ffff000008233758>] page_vma_mapped_walk+0x2e0/0x540
[<
ffff000008234adc>] page_mkclean_one+0xac/0x278
[<
ffff000008234d98>] rmap_walk_file+0xf0/0x238
[<
ffff000008236e74>] rmap_walk+0x64/0xa0
[<
ffff0000082370c8>] page_mkclean+0x90/0xa8
[<
ffff0000081f3c64>] clear_page_dirty_for_io+0x84/0x2a8
[<
ffff00000832f984>] mpage_submit_page+0x34/0x98
[<
ffff00000832fb4c>] mpage_process_page_bufs+0x164/0x170
[<
ffff00000832fc8c>] mpage_prepare_extent_to_map+0x134/0x2b8
[<
ffff00000833530c>] ext4_writepages+0x484/0xe30
[<
ffff0000081f6ab4>] do_writepages+0x44/0xe8
[<
ffff0000081e5bd4>] __filemap_fdatawrite_range+0xbc/0x110
[<
ffff0000081e5e68>] file_write_and_wait_range+0x48/0xd8
[<
ffff000008324310>] ext4_sync_file+0x80/0x4b8
[<
ffff0000082bd434>] vfs_fsync_range+0x64/0xc0
[<
ffff0000082332b4>] SyS_msync+0x194/0x1e8
This is because page_vma_mapped_walk loads the PMD twice before calling
pte_offset_map: the first time without READ_ONCE (where it gets all zeroes
due to a concurrent pmdp_invalidate) and the second time with READ_ONCE
(where it sees a valid table pointer due to a concurrent pmd_populate).
However, the compiler inlines everything and caches the first value in
a register, which is subsequently used in pte_offset_phys which returns
a junk pointer that is later dereferenced when attempting to access the
relevant pte.
This patch fixes the issue by using READ_ONCE in pte_offset_phys to ensure
that a stale value is not used. Whilst this is a point fix for a known
failure (and simple to backport), a full fix moving all of our page table
accessors over to {READ,WRITE}_ONCE and consistently using READ_ONCE in
page_vma_mapped_walk is in the works for a future kernel release.
Cc: Jon Masters <jcm@redhat.com>
Cc: Timur Tabi <timur@codeaurora.org>
Cc: <stable@vger.kernel.org>
Fixes:
f27176cfc363 ("mm: convert page_mkclean_one() to use page_vma_mapped_walk()")
Tested-by: Richard Ruigrok <rruigrok@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Boqun Feng [Fri, 29 Sep 2017 11:01:45 +0000 (19:01 +0800)]
kvm/x86: Handle async PF in RCU read-side critical sections
Sasha Levin reported a WARNING:
| WARNING: CPU: 0 PID: 6974 at kernel/rcu/tree_plugin.h:329
| rcu_preempt_note_context_switch kernel/rcu/tree_plugin.h:329 [inline]
| WARNING: CPU: 0 PID: 6974 at kernel/rcu/tree_plugin.h:329
| rcu_note_context_switch+0x16c/0x2210 kernel/rcu/tree.c:458
...
| CPU: 0 PID: 6974 Comm: syz-fuzzer Not tainted 4.13.0-next-
20170908+ #246
| Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
| 1.10.1-1ubuntu1 04/01/2014
| Call Trace:
...
| RIP: 0010:rcu_preempt_note_context_switch kernel/rcu/tree_plugin.h:329 [inline]
| RIP: 0010:rcu_note_context_switch+0x16c/0x2210 kernel/rcu/tree.c:458
| RSP: 0018:
ffff88003b2debc8 EFLAGS:
00010002
| RAX:
0000000000000001 RBX:
1ffff1000765bd85 RCX:
0000000000000000
| RDX:
1ffff100075d7882 RSI:
ffffffffb5c7da20 RDI:
ffff88003aebc410
| RBP:
ffff88003b2def30 R08:
dffffc0000000000 R09:
0000000000000001
| R10:
0000000000000000 R11:
0000000000000000 R12:
ffff88003b2def08
| R13:
0000000000000000 R14:
ffff88003aebc040 R15:
ffff88003aebc040
| __schedule+0x201/0x2240 kernel/sched/core.c:3292
| schedule+0x113/0x460 kernel/sched/core.c:3421
| kvm_async_pf_task_wait+0x43f/0x940 arch/x86/kernel/kvm.c:158
| do_async_page_fault+0x72/0x90 arch/x86/kernel/kvm.c:271
| async_page_fault+0x22/0x30 arch/x86/entry/entry_64.S:1069
| RIP: 0010:format_decode+0x240/0x830 lib/vsprintf.c:1996
| RSP: 0018:
ffff88003b2df520 EFLAGS:
00010283
| RAX:
000000000000003f RBX:
ffffffffb5d1e141 RCX:
ffff88003b2df670
| RDX:
0000000000000001 RSI:
dffffc0000000000 RDI:
ffffffffb5d1e140
| RBP:
ffff88003b2df560 R08:
dffffc0000000000 R09:
0000000000000000
| R10:
ffff88003b2df718 R11:
0000000000000000 R12:
ffff88003b2df5d8
| R13:
0000000000000064 R14:
ffffffffb5d1e140 R15:
0000000000000000
| vsnprintf+0x173/0x1700 lib/vsprintf.c:2136
| sprintf+0xbe/0xf0 lib/vsprintf.c:2386
| proc_self_get_link+0xfb/0x1c0 fs/proc/self.c:23
| get_link fs/namei.c:1047 [inline]
| link_path_walk+0x1041/0x1490 fs/namei.c:2127
...
This happened when the host hit a page fault, and delivered it as in an
async page fault, while the guest was in an RCU read-side critical
section. The guest then tries to reschedule in kvm_async_pf_task_wait(),
but rcu_preempt_note_context_switch() would treat the reschedule as a
sleep in RCU read-side critical section, which is not allowed (even in
preemptible RCU). Thus the WARN.
To cure this, make kvm_async_pf_task_wait() go to the halt path if the
PF happens in a RCU read-side critical section.
Reported-by: Sasha Levin <levinsasha928@gmail.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Wanpeng Li [Fri, 29 Sep 2017 01:16:44 +0000 (18:16 -0700)]
KVM: nVMX: Fix nested #PF intends to break L1's vmlauch/vmresume
------------[ cut here ]------------
WARNING: CPU: 4 PID: 5280 at /home/kernel/linux/arch/x86/kvm//vmx.c:11394 nested_vmx_vmexit+0xc2b/0xd70 [kvm_intel]
CPU: 4 PID: 5280 Comm: qemu-system-x86 Tainted: G W OE 4.13.0+ #17
RIP: 0010:nested_vmx_vmexit+0xc2b/0xd70 [kvm_intel]
Call Trace:
? emulator_read_emulated+0x15/0x20 [kvm]
? segmented_read+0xae/0xf0 [kvm]
vmx_inject_page_fault_nested+0x60/0x70 [kvm_intel]
? vmx_inject_page_fault_nested+0x60/0x70 [kvm_intel]
x86_emulate_instruction+0x733/0x810 [kvm]
vmx_handle_exit+0x2f4/0xda0 [kvm_intel]
? kvm_arch_vcpu_ioctl_run+0xd2f/0x1c60 [kvm]
kvm_arch_vcpu_ioctl_run+0xdab/0x1c60 [kvm]
? kvm_arch_vcpu_load+0x62/0x230 [kvm]
kvm_vcpu_ioctl+0x340/0x700 [kvm]
? kvm_vcpu_ioctl+0x340/0x700 [kvm]
? __fget+0xfc/0x210
do_vfs_ioctl+0xa4/0x6a0
? __fget+0x11d/0x210
SyS_ioctl+0x79/0x90
entry_SYSCALL_64_fastpath+0x23/0xc2
A nested #PF is triggered during L0 emulating instruction for L2. However, it
doesn't consider we should not break L1's vmlauch/vmresme. This patch fixes
it by queuing the #PF exception instead ,requesting an immediate VM exit from
L2 and keeping the exception for L1 pending for a subsequent nested VM exit.
This should actually work all the time, making vmx_inject_page_fault_nested
totally unnecessary. However, that's not working yet, so this patch can work
around the issue in the meanwhile.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ethan Zhao [Mon, 4 Sep 2017 05:59:34 +0000 (13:59 +0800)]
sched/sysctl: Check user input value of sysctl_sched_time_avg
System will hang if user set sysctl_sched_time_avg to 0:
[root@XXX ~]# sysctl kernel.sched_time_avg_ms=0
Stack traceback for pid 0
0xffff883f6406c600 0 0 1 3 R 0xffff883f6406cf50 *swapper/3
ffff883f7ccc3ae8 0000000000000018 ffffffff810c4dd0 0000000000000000
0000000000017800 ffff883f7ccc3d78 0000000000000003 ffff883f7ccc3bf8
ffffffff810c4fc9 ffff883f7ccc3c08 00000000810c5043 ffff883f7ccc3c08
Call Trace:
<IRQ> [<
ffffffff810c4dd0>] ? update_group_capacity+0x110/0x200
[<
ffffffff810c4fc9>] ? update_sd_lb_stats+0x109/0x600
[<
ffffffff810c5507>] ? find_busiest_group+0x47/0x530
[<
ffffffff810c5b84>] ? load_balance+0x194/0x900
[<
ffffffff810ad5ca>] ? update_rq_clock.part.83+0x1a/0xe0
[<
ffffffff810c6d42>] ? rebalance_domains+0x152/0x290
[<
ffffffff810c6f5c>] ? run_rebalance_domains+0xdc/0x1d0
[<
ffffffff8108a75b>] ? __do_softirq+0xfb/0x320
[<
ffffffff8108ac85>] ? irq_exit+0x125/0x130
[<
ffffffff810b3a17>] ? scheduler_ipi+0x97/0x160
[<
ffffffff81052709>] ? smp_reschedule_interrupt+0x29/0x30
[<
ffffffff8173a1be>] ? reschedule_interrupt+0x6e/0x80
<EOI> [<
ffffffff815bc83c>] ? cpuidle_enter_state+0xcc/0x230
[<
ffffffff815bc80c>] ? cpuidle_enter_state+0x9c/0x230
[<
ffffffff815bc9d7>] ? cpuidle_enter+0x17/0x20
[<
ffffffff810cd6dc>] ? cpu_startup_entry+0x38c/0x420
[<
ffffffff81053373>] ? start_secondary+0x173/0x1e0
Because divide-by-zero error happens in function:
update_group_capacity()
update_cpu_capacity()
scale_rt_capacity()
{
...
total = sched_avg_period() + delta;
used = div_u64(avg, total);
...
}
To fix this issue, check user input value of sysctl_sched_time_avg, keep
it unchanged when hitting invalid input, and set the minimum limit of
sysctl_sched_time_avg to 1 ms.
Reported-by: James Puthukattukaran <james.puthukattukaran@oracle.com>
Signed-off-by: Ethan Zhao <ethan.zhao@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: efault@gmx.de
Cc: ethan.kernel@gmail.com
Cc: keescook@chromium.org
Cc: mcgrof@kernel.org
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/1504504774-18253-1-git-send-email-ethan.zhao@oracle.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Josh Poimboeuf [Thu, 28 Sep 2017 21:58:26 +0000 (16:58 -0500)]
x86/asm: Fix inline asm call constraints for GCC 4.4
The kernel test bot (run by Xiaolong Ye) reported that the following commit:
f5caf621ee35 ("x86/asm: Fix inline asm call constraints for Clang")
is causing double faults in a kernel compiled with GCC 4.4.
Linus subsequently diagnosed the crash pattern and the buggy commit and found that
the issue is with this code:
register unsigned int __asm_call_sp asm("esp");
#define ASM_CALL_CONSTRAINT "+r" (__asm_call_sp)
Even on a 64-bit kernel, it's using ESP instead of RSP. That causes GCC
to produce the following bogus code:
ffffffff8147461d: 89 e0 mov %esp,%eax
ffffffff8147461f: 4c 89 f7 mov %r14,%rdi
ffffffff81474622: 4c 89 fe mov %r15,%rsi
ffffffff81474625: ba 20 00 00 00 mov $0x20,%edx
ffffffff8147462a: 89 c4 mov %eax,%esp
ffffffff8147462c: e8 bf 52 05 00 callq
ffffffff814c98f0 <copy_user_generic_unrolled>
Despite the absurdity of it backing up and restoring the stack pointer
for no reason, the bug is actually the fact that it's only backing up
and restoring the lower 32 bits of the stack pointer. The upper 32 bits
are getting cleared out, corrupting the stack pointer.
So change the '__asm_call_sp' register variable to be associated with
the actual full-size stack pointer.
This also requires changing the __ASM_SEL() macro to be based on the
actual compiled arch size, rather than the CONFIG value, because
CONFIG_X86_64 compiles some files with '-m32' (e.g., realmode and vdso).
Otherwise Clang fails to build the kernel because it complains about the
use of a 64-bit register (RSP) in a 32-bit file.
Reported-and-Bisected-and-Tested-by: kernel test robot <xiaolong.ye@intel.com>
Diagnosed-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: LKP <lkp@01.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes:
f5caf621ee35 ("x86/asm: Fix inline asm call constraints for Clang")
Link: http://lkml.kernel.org/r/20170928215826.6sdpmwtkiydiytim@treble
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Fri, 22 Sep 2017 16:37:28 +0000 (18:37 +0200)]
sched/debug: Add explicit TASK_PARKED printing
Currently TASK_PARKED is masqueraded as TASK_INTERRUPTIBLE, give it
its own print state because it will not in fact get woken by regular
wakeups and is a long-term state.
This requires moving TASK_PARKED into the TASK_REPORT mask, and since
that latter needs to be a contiguous bitmask, we need to shuffle the
bits around a bit.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Fri, 22 Sep 2017 16:32:41 +0000 (18:32 +0200)]
sched/debug: Ignore TASK_IDLE for SysRq-W
Markus reported that tasks in TASK_IDLE state are reported by SysRq-W,
which results in undesirable clutter.
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Fri, 22 Sep 2017 16:30:40 +0000 (18:30 +0200)]
sched/debug: Add explicit TASK_IDLE printing
Markus reported that kthreads that idle using TASK_IDLE instead of
TASK_INTERRUPTIBLE are reported in as TASK_UNINTERRUPTIBLE and things
like htop mark those red.
This is undesirable, so add an explicit state for TASK_IDLE.
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Fri, 22 Sep 2017 16:23:31 +0000 (18:23 +0200)]
sched/tracing: Use common task-state helpers
Remove yet another task-state char instance.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Prateek Sood [Thu, 7 Sep 2017 14:30:58 +0000 (20:00 +0530)]
locking/rwsem-xadd: Fix missed wakeup due to reordering of load
If a spinner is present, there is a chance that the load of
rwsem_has_spinner() in rwsem_wake() can be reordered with
respect to decrement of rwsem count in __up_write() leading
to wakeup being missed:
spinning writer up_write caller
--------------- -----------------------
[S] osq_unlock() [L] osq
spin_lock(wait_lock)
sem->count=0xFFFFFFFF00000001
+0xFFFFFFFF00000000
count=sem->count
MB
sem->count=0xFFFFFFFE00000001
-0xFFFFFFFF00000001
spin_trylock(wait_lock)
return
rwsem_try_write_lock(count)
spin_unlock(wait_lock)
schedule()
Reordering of atomic_long_sub_return_release() in __up_write()
and rwsem_has_spinner() in rwsem_wake() can cause missing of
wakeup in up_write() context. In spinning writer, sem->count
and local variable count is 0XFFFFFFFE00000001. It would result
in rwsem_try_write_lock() failing to acquire rwsem and spinning
writer going to sleep in rwsem_down_write_failed().
The smp_rmb() will make sure that the spinner state is
consulted after sem->count is updated in up_write context.
Signed-off-by: Prateek Sood <prsood@codeaurora.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave@stgolabs.net
Cc: longman@redhat.com
Cc: parri.andrea@gmail.com
Cc: sramana@codeaurora.org
Link: http://lkml.kernel.org/r/1504794658-15397-1-git-send-email-prsood@codeaurora.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Fri, 22 Sep 2017 16:19:53 +0000 (18:19 +0200)]
sched/tracing: Fix trace_sched_switch task-state printing
Convert trace_sched_switch to use the common task-state helpers and
fix the "X" and "Z" order, possibly they ended up in the wrong order
because TASK_REPORT has them in the wrong order too.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Fri, 22 Sep 2017 16:14:08 +0000 (18:14 +0200)]
sched/debug: Remove unused variable
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Fri, 22 Sep 2017 16:13:36 +0000 (18:13 +0200)]
sched/debug: Convert TASK_state to hex
Bit patterns are easier in hex.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Fri, 22 Sep 2017 16:09:26 +0000 (18:09 +0200)]
sched/debug: Implement consistent task-state printing
Currently get_task_state() and task_state_to_char() report different
states, create a number of common helpers and unify the reported state
space.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Thomas Gleixner [Fri, 29 Sep 2017 08:07:44 +0000 (10:07 +0200)]
um/time: Fixup namespace collision
The new timer_setup() function for struct timer_list collides with a
private um function. Rename it.
Fixes:
686fef928bba ("timer: Prepare to change timer callback argument type")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Weinberger <richard@nod.at>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: user-mode-linux-devel@lists.sourceforge.net
Cc: Kees Cook <keescook@chromium.org>
Alexander Shishkin [Wed, 6 Sep 2017 16:08:11 +0000 (19:08 +0300)]
perf/aux: Only update ->aux_wakeup in non-overwrite mode
The following commit:
d9a50b0256 ("perf/aux: Ensure aux_wakeup represents most recent wakeup index")
changed the AUX wakeup position calculation to rounddown(), which causes
a division-by-zero in AUX overwrite mode (aka "snapshot mode").
The zero denominator results from the fact that perf record doesn't set
aux_watermark to anything, in which case the kernel will set it to half
the AUX buffer size, but only for non-overwrite mode. In the overwrite
mode aux_watermark stays zero.
The good news is that, AUX overwrite mode, wakeups don't happen and
related bookkeeping is not relevant, so we can simply forego the whole
wakeup updates.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/20170906160811.16510-1-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Dave Airlie [Fri, 29 Sep 2017 07:11:04 +0000 (17:11 +1000)]
Merge tag 'drm-misc-fixes-2017-09-28-1' of git://anongit.freedesktop.org/git/drm-misc into drm-fixes
Driver Changes:
- qxl: fix primary surface and fb unpinning (Gerd)
- sun41: fix CEC_PIN config gate now that media has been merged (Hans)
- tegra: fix TRACE_INCLUDE_PATH (Thierry)
Cc: Thierry Reding <treding@nvidia.com>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Gerd Hoffmann <kraxel@redhat.com>
* tag 'drm-misc-fixes-2017-09-28-1' of git://anongit.freedesktop.org/git/drm-misc:
drm/tegra: trace: Fix path to include
qxl: fix framebuffer unpinning
drm/sun4i: cec: Enable back CEC-pin framework
qxl: fix primary surface handling
Linus Torvalds [Thu, 28 Sep 2017 21:38:30 +0000 (14:38 -0700)]
Merge tag 'acpi-4.14-rc3' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"This fixes an APEI problem that may cause a reported error to be
missed due to a race condition"
* tag 'acpi-4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / APEI: clear error status before acknowledging the error
Linus Torvalds [Thu, 28 Sep 2017 21:35:51 +0000 (14:35 -0700)]
Merge tag 'pm-4.14-rc3' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a deadlock in the operating performance points (OPP)
framework introduced during the 4.11 cycle, more issues with duplicate
device objects for cpufreq-dt and cpufreq documentation.
Specifics:
- Fix a deadlock in the operating performance points (OPP) framework
caused by a notifier callback taking a lock that's already held by
its caller (Viresh Kumar).
- Prevent the ti-cpufreq and cpufreq-dt-platdev drivers from
attempting to register conflicting device objects which triggers a
warning from sysfs (Suniel Mahesh).
- Drop a stale reference to a piece of intel_pstate documentation
that's not in the tree any more (Rafael Wysocki)"
* tag 'pm-4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: docs: Drop intel-pstate.txt from index.txt
cpufreq: dt: Fix sysfs duplicate filename creation for platform-device
PM / OPP: Call notifier without holding opp_table->lock
Linus Torvalds [Thu, 28 Sep 2017 20:27:23 +0000 (13:27 -0700)]
Merge tag 'xfs-4.14-fixes-2' of git://git./fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
- fix various problems with the copy-on-write extent maps getting freed
at the wrong time
- fix printk format specifier problems
- report zeroing operation outcomes instead of dropping them on the
floor
- fix some crashes when dio operations partially fail
- fix a race condition between unwritten extent conversion & dio read
- fix some incorrect tests in the inode log item processing
- correct the delayed allocation space reservations on rmap filesystems
- fix some problems checking for dax support
* tag 'xfs-4.14-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: revert "xfs: factor rmap btree size into the indlen calculations"
xfs: Capture state of the right inode in xfs_iflush_done
xfs: perag initialization should only touch m_ag_max_usable for AG 0
xfs: update i_size after unwritten conversion in dio completion
iomap_dio_rw: Allocate AIO completion queue before submitting dio
xfs: validate bdev support for DAX inode flag
xfs: remove redundant re-initialization of total_nr_pages
xfs: Output warning message when discard option was enabled even though the device does not support discard
xfs: report zeroed or not correctly in xfs_zero_range()
xfs: kill meaningless variable 'zero'
fs/xfs: Use %pS printk format for direct addresses
xfs: evict CoW fork extents when performing finsert/fcollapse
xfs: don't unconditionally clear the reflink flag on zero-block files
Linus Torvalds [Thu, 28 Sep 2017 20:20:32 +0000 (13:20 -0700)]
Revert "Bluetooth: Add option for disabling legacy ioctl interfaces"
This reverts commit
dbbccdc4ced015cdd4051299bd87fbe0254ad351.
It turns out that the "legacy" users aren't so legacy at all, and that
turning off the legacy ioctl will break the current Qt bluetooth stack
for bluetooth LE devices that were released just a couple of months ago.
So it's simply not true that this was a legacy interface that hasn't
been needed and is only limited to old legacy BT devices. Because I
actually read Kconfig help messages, and actively try to turn off
features that I don't need, I turned the option off.
Then I spent _way_ too much time debugging BLE issues until I realized
that it wasn't the Qt and subsurface development that had broken one of
my dive computer BLE downloads, but simply my broken kernel config.
Maybe in a decade it will be true that this is a legacy interface. And
maybe with a better help-text and correct dependencies, this kind of
legacy removal might be acceptable. But as things are right now both
the commit message and the Kconfig help text were misleading, and the
Kconfig option had the wrong dependenencies.
There's no reason to keep that broken Kconfig option in the tree.
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rafael J. Wysocki [Thu, 28 Sep 2017 20:18:15 +0000 (22:18 +0200)]
Merge branch 'acpi-apei'
* acpi-apei:
ACPI / APEI: clear error status before acknowledging the error
Linus Torvalds [Thu, 28 Sep 2017 19:12:51 +0000 (12:12 -0700)]
Merge tag 'for-linus' of git://git./linux/kernel/git/dledford/rdma
Pull rdma fixes from Doug Ledford:
"Second -rc update for 4.14.
Both Mellanox and Intel had a series of -rc fixes that landed this
week. The Mellanox bunch is spread throughout the stack and not just
in their driver, where as the Intel bunch was mostly in the hfi1
driver. And, several of the fixes in the hfi1 driver were more than
just simple 5 line fixes. As a result, the hfi1 driver fixes has a
sizable LOC count.
Everything else is as one would expect in an RC cycle in terms of LOC
count. One item that might jump out and make you think "That's not an
rc item" is the fix that corrects a typo. But, that change fixes a
typo in a user visible API that was just added in this merge window,
so if we fix it now, we can fix it. If we don't, the typo is in the
API forever. Another that might not appear to be a fix at first glance
is the Simplify mlx5_ib_cont_pages patch, but the simplification
allows them to fix a bug in the existing function whenever the length
of an SGE exceeded page size. We also had to revert one patch from the
merge window that was wrong.
Summary:
- a few core fixes
- a few ipoib fixes
- a few mlx5 fixes
- a 7-patch hfi1 related series"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
IB/hfi1: Unsuccessful PCIe caps tuning should not fail driver load
IB/hfi1: On error, fix use after free during user context setup
Revert "IB/ipoib: Update broadcast object if PKey value was changed in index 0"
IB/hfi1: Return correct value in general interrupt handler
IB/hfi1: Check eeprom config partition validity
IB/hfi1: Only reset QSFP after link up and turn off AOC TX
IB/hfi1: Turn off AOC TX after offline substates
IB/mlx5: Fix NULL deference on mlx5_ib_update_xlt failure
IB/mlx5: Simplify mlx5_ib_cont_pages
IB/ipoib: Fix inconsistency with free_netdev and free_rdma_netdev
IB/ipoib: Fix sysfs Pkey create<->remove possible deadlock
IB: Correct MR length field to be 64-bit
IB/core: Fix qp_sec use after free access
IB/core: Fix typo in the name of the tag-matching cap struct
Rafael J. Wysocki [Thu, 28 Sep 2017 19:08:07 +0000 (21:08 +0200)]
Merge branches 'pm-opp' and 'pm-cpufreq'
* pm-opp:
PM / OPP: Call notifier without holding opp_table->lock
* pm-cpufreq:
cpufreq: docs: Drop intel-pstate.txt from index.txt
cpufreq: dt: Fix sysfs duplicate filename creation for platform-device
Linus Torvalds [Thu, 28 Sep 2017 18:20:52 +0000 (11:20 -0700)]
Merge tag 'seccomp-v4.14-rc3' of git://git./linux/kernel/git/kees/linux
Pull seccomp fix from Kees Cook:
"Fix refcounting bug in CRIU interface, noticed by Chris Salls (Oleg &
Tycho)"
* tag 'seccomp-v4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
seccomp: fix the usage of get/put_seccomp_filter() in seccomp_get_filter()
Thomas Richter [Fri, 15 Sep 2017 07:14:04 +0000 (09:14 +0200)]
perf test: Fix vmlinux failure on s390x part 2
On s390x perf test 1 failed. It turned out that commit
cf6383f73cf2
("perf report: Fix kernel symbol adjustment for s390x") was incorrect.
The previous implementation in dso__load_sym() is also suitable for
s390x.
Therefore this patch undoes commit
cf6383f73cf2
Signed-off-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Cc: Zvonko Kosic <zvonko.kosic@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Fixes:
cf6383f73cf2 ("perf report: Fix kernel symbol adjustment for s390x")
LPU-Reference:
20170915071404.58398-2-tmricht@linux.vnet.ibm.com
Link: http://lkml.kernel.org/n/tip-v101o8k25vuja2ogosgf15yy@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Thomas Richter [Fri, 15 Sep 2017 07:14:03 +0000 (09:14 +0200)]
perf test: Fix vmlinux failure on s390x
On s390x perf test 1 failed. It turned out that commit
4a084ecfc821
("perf report: Fix module symbol adjustment for s390x") was incorrect.
The previous implementation in dso__load_sym() is also suitable for
s390x.
Therefore this patch undoes commit
4a084ecfc821.
Signed-off-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Zvonko Kosic <zvonko.kosic@de.ibm.com>
Fixes:
4a084ecfc821 ("perf report: Fix module symbol adjustment for s390x")
LPU-Reference:
20170915071404.58398-1-tmricht@linux.vnet.ibm.com
Link: http://lkml.kernel.org/n/tip-5ani7ly57zji7s0hmzkx416l@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Paolo Bonzini [Thu, 28 Sep 2017 15:58:41 +0000 (17:58 +0200)]
KVM: VMX: use cmpxchg64
This fixes a compilation failure on 32-bit systems.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Kees Cook [Thu, 28 Sep 2017 13:38:17 +0000 (06:38 -0700)]
timer: Prepare to change timer callback argument type
Modern kernel callback systems pass the structure associated with a
given callback to the callback function. The timer callback remains one
of the legacy cases where an arbitrary unsigned long argument continues
to be passed as the callback argument. This has several problems:
- This bloats the timer_list structure with a normally redundant
.data field.
- No type checking is being performed, forcing callbacks to do
explicit type casts of the unsigned long argument into the object
that was passed, rather than using container_of(), as done in most
of the other callback infrastructure.
- Neighboring buffer overflows can overwrite both the .function and
the .data field, providing attackers with a way to elevate from a buffer
overflow into a simplistic ROP-like mechanism that allows calling
arbitrary functions with a controlled first argument.
- For future Control Flow Integrity work, this creates a unique function
prototype for timer callbacks, instead of allowing them to continue to
be clustered with other void functions that take a single unsigned long
argument.
This adds a new timer initialization API, which will ultimately replace
the existing setup_timer(), setup_{deferrable,pinned,etc}_timer() family,
named timer_setup() (to mirror hrtimer_setup(), making instances of its
use much easier to grep for).
In order to support the migration of existing timers into the new
callback arguments, timer_setup() casts its arguments to the existing
legacy types, and explicitly passes the timer pointer as the legacy
data argument. Once all setup_*timer() callers have been replaced with
timer_setup(), the casts can be removed, and the data argument can be
dropped with the timer expiration code changed to just pass the timer
to the callback directly.
Since the regular pattern of using container_of() during local variable
declaration repeats the need for the variable type declaration
to be included, this adds a helper modeled after other from_*()
helpers that wrap container_of(), named from_timer(). This helper uses
typeof(*variable), removing the type redundancy and minimizing the need
for line wraps in forthcoming conversions from "unsigned data long" to
"struct timer_list *" in the timer callbacks:
-void callback(unsigned long data)
+void callback(struct timer_list *t)
{
- struct some_data_structure *local = (struct some_data_structure *)data;
+ struct some_data_structure *local = from_timer(local, t, timer);
Finally, in order to support the handful of timer users that perform
open-coded assignments of the .function (and .data) fields, provide
cast macros (TIMER_FUNC_TYPE and TIMER_DATA_TYPE) that can be used
temporarily. Once conversion has been completed, these can be globally
trivially removed.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20170928133817.GA113410@beast
Zhenzhong Duan [Wed, 27 Sep 2017 09:41:25 +0000 (02:41 -0700)]
xen/mmu: Call xen_cleanhighmap() with 4MB aligned for page tables mapping
When bootup a PVM guest with large memory(Ex.240GB), XEN provided initial
mapping overlaps with kernel module virtual space. When mapping in this space
is cleared by xen_cleanhighmap(), in certain case there could be an 2MB mapping
left. This is due to XEN initialize 4MB aligned mapping but xen_cleanhighmap()
finish at 2MB boundary.
When module loading is just on top of the 2MB space, got below warning:
WARNING: at mm/vmalloc.c:106 vmap_pte_range+0x14e/0x190()
Call Trace:
[<
ffffffff81117083>] warn_alloc_failed+0xf3/0x160
[<
ffffffff81146022>] __vmalloc_area_node+0x182/0x1c0
[<
ffffffff810ac91e>] ? module_alloc_update_bounds+0x1e/0x80
[<
ffffffff81145df7>] __vmalloc_node_range+0xa7/0x110
[<
ffffffff810ac91e>] ? module_alloc_update_bounds+0x1e/0x80
[<
ffffffff8103ca54>] module_alloc+0x64/0x70
[<
ffffffff810ac91e>] ? module_alloc_update_bounds+0x1e/0x80
[<
ffffffff810ac91e>] module_alloc_update_bounds+0x1e/0x80
[<
ffffffff810ac9a7>] move_module+0x27/0x150
[<
ffffffff810aefa0>] layout_and_allocate+0x120/0x1b0
[<
ffffffff810af0a8>] load_module+0x78/0x640
[<
ffffffff811ff90b>] ? security_file_permission+0x8b/0x90
[<
ffffffff810af6d2>] sys_init_module+0x62/0x1e0
[<
ffffffff815154c2>] system_call_fastpath+0x16/0x1b
Then the mapping of 2MB is cleared, finally oops when the page in that space is
accessed.
BUG: unable to handle kernel paging request at
ffff880022600000
IP: [<
ffffffff81260877>] clear_page_c_e+0x7/0x10
PGD
1788067 PUD
178c067 PMD
22434067 PTE 0
Oops: 0002 [#1] SMP
Call Trace:
[<
ffffffff81116ef7>] ? prep_new_page+0x127/0x1c0
[<
ffffffff81117d42>] get_page_from_freelist+0x1e2/0x550
[<
ffffffff81133010>] ? ii_iovec_copy_to_user+0x90/0x140
[<
ffffffff81119c9d>] __alloc_pages_nodemask+0x12d/0x230
[<
ffffffff81155516>] alloc_pages_vma+0xc6/0x1a0
[<
ffffffff81006ffd>] ? pte_mfn_to_pfn+0x7d/0x100
[<
ffffffff81134cfb>] do_anonymous_page+0x16b/0x350
[<
ffffffff81139c34>] handle_pte_fault+0x1e4/0x200
[<
ffffffff8100712e>] ? xen_pmd_val+0xe/0x10
[<
ffffffff810052c9>] ? __raw_callee_save_xen_pmd_val+0x11/0x1e
[<
ffffffff81139dab>] handle_mm_fault+0x15b/0x270
[<
ffffffff81510c10>] do_page_fault+0x140/0x470
[<
ffffffff8150d7d5>] page_fault+0x25/0x30
Call xen_cleanhighmap() with 4MB aligned for page tables mapping to fix it.
The unnecessory call of xen_cleanhighmap() in DEBUG mode is also removed.
-v2: add comment about XEN alignment from Juergen.
References: https://lists.xen.org/archives/html/xen-devel/2012-07/msg01562.html
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
[boris: added 'xen/mmu' tag to commit subject]
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Jan Beulich [Mon, 25 Sep 2017 08:01:01 +0000 (02:01 -0600)]
xen-pciback: relax BAR sizing write value check
Just like done in
d2bd05d88d ("xen-pciback: return proper values during
BAR sizing") for the ROM BAR, ordinary ones also shouldn't compare the
written value directly against ~0, but consider the r/o bits at the
bottom (if any).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Jeffy Chen [Thu, 28 Sep 2017 04:37:31 +0000 (12:37 +0800)]
irq/generic-chip: Don't replace domain's name
When generic irq chips are allocated for an irq domain the domain name is
set to the irq chip name. That was done to have named domains before the
recent changes which enforce domain naming were done.
Since then the overwrite causes a memory leak when the domain name is
dynamically allocated and even worse it would cause the domain free code to
free the wrong name pointer, which might point to a constant.
Remove the name assignment to prevent this.
Fixes:
d59f6617eef0 ("genirq: Allow fwnode to carry name information only")
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20170928043731.4764-1-jeffy.chen@rock-chips.com
Oleg Nesterov [Wed, 27 Sep 2017 15:25:30 +0000 (09:25 -0600)]
seccomp: fix the usage of get/put_seccomp_filter() in seccomp_get_filter()
As Chris explains, get_seccomp_filter() and put_seccomp_filter() can end
up using different filters. Once we drop ->siglock it is possible for
task->seccomp.filter to have been replaced by SECCOMP_FILTER_FLAG_TSYNC.
Fixes:
f8e529ed941b ("seccomp, ptrace: add support for dumping seccomp filters")
Reported-by: Chris Salls <chrissalls5@gmail.com>
Cc: stable@vger.kernel.org # needs s/refcount_/atomic_/ for v4.12 and earlier
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
[tycho: add __get_seccomp_filter vs. open coding refcount_inc()]
Signed-off-by: Tycho Andersen <tycho@docker.com>
[kees: tweak commit log]
Signed-off-by: Kees Cook <keescook@chromium.org>
Josh Poimboeuf [Wed, 27 Sep 2017 15:36:38 +0000 (10:36 -0500)]
objtool: Support unoptimized frame pointer setup
Arnd Bergmann reported a bunch of warnings like:
crypto/jitterentropy.o: warning: objtool: jent_fold_time()+0x3b: call without frame pointer save/setup
crypto/jitterentropy.o: warning: objtool: jent_stuck()+0x1d: call without frame pointer save/setup
crypto/jitterentropy.o: warning: objtool: jent_unbiased_bit()+0x15: call without frame pointer save/setup
crypto/jitterentropy.o: warning: objtool: jent_read_entropy()+0x32: call without frame pointer save/setup
crypto/jitterentropy.o: warning: objtool: jent_entropy_collector_free()+0x19: call without frame pointer save/setup
and
arch/x86/events/core.o: warning: objtool: collect_events uses BP as a scratch register
arch/x86/events/core.o: warning: objtool: events_ht_sysfs_show()+0x22: call without frame pointer save/setup
With certain rare configurations, GCC sometimes sets up the frame
pointer with:
lea (%rsp),%rbp
instead of:
mov %rsp,%rbp
The instructions are equivalent, so treat the former like the latter.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/a468af8b28a69b83fffc6d7668be9b6fcc873699.1506526584.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Josh Poimboeuf [Wed, 27 Sep 2017 22:34:23 +0000 (17:34 -0500)]
objtool: Skip unreachable warnings for GCC 4.4 and older
The kbuild bot occasionally reports warnings like:
drivers/scsi/pcmcia/aha152x_core.o: warning: objtool: seldo_run()+0x130: unreachable instruction
These warnings are always with GCC 4.4. That version of GCC sometimes
places unreachable instructions after calls to noreturn functions.
The unreachable warnings aren't very important anyway. Just ignore them
for old versions of GCC.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/bc89b807d965b98ec18a0bb94f96a594bd58f2f2.1506551639.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Shaohua Li [Thu, 21 Sep 2017 18:03:52 +0000 (11:03 -0700)]
md/raid5: cap worker count
static checker reports a potential integer overflow. Cap the worker count to
avoid the overflow.
Reported:-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Shaohua Li [Thu, 21 Sep 2017 17:29:22 +0000 (10:29 -0700)]
dm-raid: fix a race condition in request handling
raid_map calls pers->make_request, which missed the suspend check. Fix it with
the new md_handle_request API.
Fix:
cc27b0c78c79(md: fix deadlock between mddev_suspend() and md_write_start())
Cc: Heinz Mauelshagen <heinzm@redhat.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Shaohua Li [Thu, 21 Sep 2017 16:55:28 +0000 (09:55 -0700)]
md: fix a race condition for flush request handling
md_submit_flush_data calls pers->make_request, which missed the suspend check.
Fix it with the new md_handle_request API.
Reported-by: Nate Dailey <nate.dailey@stratus.com>
Tested-by: Nate Dailey <nate.dailey@stratus.com>
Fix:
cc27b0c78c79(md: fix deadlock between mddev_suspend() and md_write_start())
Cc: stable@vger.kernel.org
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Shaohua Li [Thu, 21 Sep 2017 17:23:35 +0000 (10:23 -0700)]
md: separate request handling
With commit
cc27b0c78c79, pers->make_request could bail out without handling
the bio. If that happens, we should retry. The commit fixes md_make_request
but not other call sites. Separate the request handling part, so other call
sites can use it.
Reported-by: Nate Dailey <nate.dailey@stratus.com>
Fix:
cc27b0c78c79(md: fix deadlock between mddev_suspend() and md_write_start())
Cc: stable@vger.kernel.org
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Martin Wilck [Wed, 27 Sep 2017 12:44:19 +0000 (14:44 +0200)]
scsi: ILLEGAL REQUEST + ASC==27 => target failure
ASC 0x27 is "WRITE PROTECTED". This error code is returned e.g. by
Fujitsu ETERNUS systems under certain conditions for WRITE SAME 16
commands with UNMAP bit set. It should not be treated as a path
error. In general, it makes sense to assume that being write protected
is a target rather than a path property.
Signed-off-by: Martin Wilck <mwilck@suse.com>
Acked-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Guilherme G. Piccoli [Tue, 19 Sep 2017 15:11:55 +0000 (12:11 -0300)]
scsi: aacraid: Add a small delay after IOP reset
Commit
0e9973ed3382 ("scsi: aacraid: Add periodic checks to see IOP reset
status") changed the way driver checks if a reset succeeded. Now, after an
IOP reset, aacraid immediately start polling a register to verify the reset
is complete.
This behavior cause regressions on the reset path in PowerPC (at least).
Since the delay after the IOP reset was removed by the aforementioned patch,
the fact driver just starts to read a register instantly after the reset
was issued (by writing in another register) "corrupts" the reset procedure,
which ends up failing all the time.
The issue highly impacted kdump on PowerPC, since on kdump path we
proactively issue a reset in adapter (through the reset_devices kernel
parameter).
This patch (re-)adds a delay right after IOP reset is issued. Empirically
we measured that 3 seconds is enough, but for safety reasons we delay
for 5s (and since it was 30s before, 5s is still a small amount).
For reference, without this patch we observe the following messages
on kdump kernel boot process:
[ 76.294] aacraid 0003:01:00.0: IOP reset failed
[ 76.294] aacraid 0003:01:00.0: ARC Reset attempt failed
[ 86.524] aacraid 0003:01:00.0: adapter kernel panic'd ff.
[ 86.524] aacraid 0003:01:00.0: Controller reset type is 3
[ 86.524] aacraid 0003:01:00.0: Issuing IOP reset
[146.534] aacraid 0003:01:00.0: IOP reset failed
[146.534] aacraid 0003:01:00.0: ARC Reset attempt failed
Fixes:
0e9973ed3382 ("scsi: aacraid: Add periodic checks to see IOP reset status")
Cc: stable@vger.kernel.org # v4.13+
Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Acked-by: Dave Carroll <david.carroll@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Rafael J. Wysocki [Thu, 28 Sep 2017 00:08:43 +0000 (02:08 +0200)]
cpufreq: docs: Drop intel-pstate.txt from index.txt
Commit
33fc30b47098 (cpufreq: intel_pstate: Document the current
behavior and user interface) dropped the intel-pstate.txt file
from Documentation/cpu-freq/, but it did not update the index.txt
file in there accordingly, so do that now.
Fixes:
33fc30b47098 (cpufreq: intel_pstate: Document the current behavior and user interface)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
James Morris [Wed, 27 Sep 2017 23:11:28 +0000 (09:11 +1000)]
Merge commit 'keys-fixes-
20170927' into fixes-v4.14-rc3
From David Howells:
"There are two sets of patches here:
(1) A bunch of core keyrings bug fixes from Eric Biggers.
(2) Fixing big_key to use safe crypto from Jason A. Donenfeld."
Tyler Baicar [Mon, 28 Aug 2017 16:53:41 +0000 (10:53 -0600)]
ACPI / APEI: clear error status before acknowledging the error
Currently we acknowledge errors before clearing the error status.
This could cause a new error to be populated by firmware in-between
the error acknowledgment and the error status clearing which would
cause the second error's status to be cleared without being handled.
So, clear the error status before acknowledging the errors.
Also, make sure to acknowledge the error if the error status read
fails.
Signed-off-by: Tyler Baicar <tbaicar@codeaurora.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Dave Airlie [Wed, 27 Sep 2017 19:49:38 +0000 (05:49 +1000)]
Merge branch 'drm-fixes-4.14' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
A few fixes for 4.14. Nothing too major.
* 'drm-fixes-4.14' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: disable hard reset in hibernate for APUs
drm/amdgpu: revert tile table update for oland
Dave Airlie [Wed, 27 Sep 2017 19:48:53 +0000 (05:48 +1000)]
Merge branch 'etnaviv/fixes' of https://git.pengutronix.de/git/lst/linux into drm-fixes
Just two small etnaviv fixes, one fixing a list corruption, the other
fixing a NULL ptr deref in an error path.
* 'etnaviv/fixes' of https://git.pengutronix.de/git/lst/linux:
etnaviv: fix gem object list corruption
etnaviv: fix submit error path
Dave Airlie [Wed, 27 Sep 2017 19:47:39 +0000 (05:47 +1000)]
Merge tag 'drm-amdkfd-fixes-2017-09-24' of git://people.freedesktop.org/~gabbayo/linux into drm-fixes
It contains the following fixes:
- correct checking of return value
- send correct parameter to function (According to the parameter type)
- avoid spamming of dmesg log
- fix queue wrapping calculations
* tag 'drm-amdkfd-fixes-2017-09-24' of git://people.freedesktop.org/~gabbayo/linux:
drm/amdkfd: Print event limit messages only once per process
drm/amdkfd: Fix kernel-queue wrapping bugs
drm/amdkfd: Fix incorrect destroy_mqd parameter
drm/amdkfd: check for null dev to avoid a null pointer dereference
Linus Torvalds [Wed, 27 Sep 2017 19:22:12 +0000 (12:22 -0700)]
Merge branch 'for_linus' of git://git./linux/kernel/git/jack/linux-fs
Pull quota and isofs fixes from Jan Kara:
"Two quota fixes (fallout of the quota locking changes) and an isofs
build fix"
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
quota: Fix quota corruption with generic/232 test
isofs: fix build regression
quota: add missing lock into __dquot_transfer()
Linus Torvalds [Wed, 27 Sep 2017 17:51:08 +0000 (10:51 -0700)]
Merge tag 'linux-kselftest-4.14-rc3-fixes' of git://git./linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"This update consists of:
- fixes to several existing tests
- a test for regression introduced by
b9470c27607b ("inet: kill
smallest_size and smallest_port")
- seccomp support for glibc 2.26 siginfo_t.h
- fixes to kselftest framework and tests to run make O=dir use-case
- fixes to silence unnecessary test output to de-clutter test results"
* tag 'linux-kselftest-4.14-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (28 commits)
selftests: timers: set-timer-lat: Fix hang when testing unsupported alarms
selftests: timers: set-timer-lat: fix hang when std out/err are redirected
selftests/memfd: correct run_tests.sh permission
selftests/seccomp: Support glibc 2.26 siginfo_t.h
selftests: futex: Makefile: fix for loops in targets to run silently
selftests: Makefile: fix for loops in targets to run silently
selftests: mqueue: Use full path to run tests from Makefile
selftests: futex: copy sub-dir test scripts for make O=dir run
selftests: lib.mk: copy test scripts and test files for make O=dir run
selftests: sync: kselftest and kselftest-clean fail for make O=dir case
selftests: sync: use TEST_CUSTOM_PROGS instead of TEST_PROGS
selftests: lib.mk: add TEST_CUSTOM_PROGS to allow custom test run/install
selftests: watchdog: fix to use TEST_GEN_PROGS and remove clean
selftests: lib.mk: fix test executable status check to use full path
selftests: Makefile: clear LDFLAGS for make O=dir use-case
selftests: lib.mk: kselftest and kselftest-clean fail for make O=dir case
Makefile: kselftest and kselftest-clean fail for make O=dir case
selftests/net: msg_zerocopy enable build with older kernel headers
selftests: actually run the various net selftests
selftest: add a reuseaddr test
...
Richard Genoud [Wed, 27 Sep 2017 12:49:17 +0000 (14:49 +0200)]
mtd: nand: atmel: fix buffer overflow in atmel_pmecc_user
When calculating the size needed by struct atmel_pmecc_user *user,
the dmu and delta buffer sizes were forgotten.
This lead to a memory corruption (especially with a large ecc_strength).
Link: http://lkml.kernel.org/r/1506503157.3016.5.camel@gmail.com
Fixes:
f88fc122cc34 ("mtd: nand: Cleanup/rework the atmel_nand driver")
Cc: stable@vger.kernel.org
Reported-by: Richard Genoud <richard.genoud@gmail.com>
Pointed-at-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Reviewed-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Linus Torvalds [Wed, 27 Sep 2017 15:33:26 +0000 (08:33 -0700)]
Merge branch 'x86-fpu-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fpu fixes and cleanups from Ingo Molnar:
"This is _way_ more cleanups than fixes, but the bugs were subtle and
hard to hit, and the primary reason for them existing was the
unnecessary historical complexity of some of the x86/fpu interfaces.
The first bunch of commits clean up and simplify the xstate user copy
handling functions, in reaction to the collective head-scratching
about the xstate user-copy handling code that leads up to the fix for
this SkyLake xstate handling bug:
0852b374173b: x86/fpu: Add FPU state copying quirk to handle XRSTOR failure on Intel Skylake CPUs
The cleanups don't change any functionality, they just (hopefully)
make it all clearer, more consistent, more debuggable and more robust.
Note that most of the linecount increase comes from these commits,
where we better split the user/kernel copy logic by having more
variants, instead repeated fragile patterns of:
if (kbuf) {
memcpy(kbuf + pos, data, copy);
} else {
if (__copy_to_user(ubuf + pos, data, copy))
return -EFAULT;
}
The next bunch of commits simplify the FPU state-machine to get rid of
old lazy-FPU idiosyncrasies - a defensive simplification to make all
the code easier to review and fix. No change in functionality.
Then there's a couple of additional debugging tweaks: static checker
warning fix and move an FPU related warning to under WARN_ON_FPU(),
followed by another bunch of commits that represent a finegrained
split-up of the fixes from Eric Biggers to handle weird xstate bits
properly.
I did this finegrained split-up because some of these fixes also
impact the ABI for weird xstate handling, for which we'd like to have
good bisection results, should they cause any problems. (We also had
one regression with the more monolithic fixes, so splitting it all up
sounded prudent for robustness reasons as well.)
About the whole series: the commits up to
03eaec81ac09 have been in
-next for months - but I've recently rebased them to remove a state
machine clean-up commit that was objected to, and to make it more
bisectable - so technically it's a new, rebased tree.
Robustness history: this series had some regressions along the way,
and all reported regressions have been fixed. All but one of the
regressions manifested itself as easy to report warnings. The previous
version of this latest series was also in linux-next, with one
(warning-only) regression reported which is fixed in the latest
version.
Barring last minute brown paper bag bugs (and the commits are now
older by a day which I'd hope helps paperbag reduction), I'm
reasonably confident about its general robustness.
Famous last words ..."
* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
x86/fpu: Use using_compacted_format() instead of open coded X86_FEATURE_XSAVES
x86/fpu: Use validate_xstate_header() to validate the xstate_header in copy_user_to_xstate()
x86/fpu: Eliminate the 'xfeatures' local variable in copy_user_to_xstate()
x86/fpu: Copy the full header in copy_user_to_xstate()
x86/fpu: Use validate_xstate_header() to validate the xstate_header in copy_kernel_to_xstate()
x86/fpu: Eliminate the 'xfeatures' local variable in copy_kernel_to_xstate()
x86/fpu: Copy the full state_header in copy_kernel_to_xstate()
x86/fpu: Use validate_xstate_header() to validate the xstate_header in __fpu__restore_sig()
x86/fpu: Use validate_xstate_header() to validate the xstate_header in xstateregs_set()
x86/fpu: Introduce validate_xstate_header()
x86/fpu: Rename fpu__activate_fpstate_read/write() to fpu__prepare_[read|write]()
x86/fpu: Rename fpu__activate_curr() to fpu__initialize()
x86/fpu: Simplify and speed up fpu__copy()
x86/fpu: Fix stale comments about lazy FPU logic
x86/fpu: Rename fpu::fpstate_active to fpu::initialized
x86/fpu: Remove fpu__current_fpstate_write_begin/end()
x86/fpu: Fix fpu__activate_fpstate_read() and update comments
x86/fpu: Reinitialize FPU registers if restoring FPU state fails
x86/fpu: Don't let userspace set bogus xcomp_bv
x86/fpu: Turn WARN_ON() in context switch into WARN_ON_FPU()
...
Harish Chegondi [Tue, 26 Sep 2017 13:06:34 +0000 (06:06 -0700)]
IB/hfi1: Unsuccessful PCIe caps tuning should not fail driver load
Failure to tune PCIe capabilities should not fail driver load. This can
cause the driver load to fail on systems with any of the following:
1. HFI's parent is not root. Example: HFI card is behind a PCIe bridge.
2. HFI's parent is not PCI Express capable.
In these situations, failure to tune PCIe capabilities should be logged
in the system message logs but not cause the driver load to fail.
This patch also ensures pcie capability word DevCtl is written only
after a successful read and the capability tuning process continues
even if read/write of the pcie capability word DevCtl fails.
Fixes:
c53df62c7a9a ("IB/hfi1: Check return values from PCI config API calls")
Fixes:
bf70a7757736 ("staging/rdma/hfi1: Enable WFR PCIe extended tags from the driver")
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Jakub Byczkowski <jakub.byczkowski@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Michael J. Ruhl [Tue, 26 Sep 2017 13:06:28 +0000 (06:06 -0700)]
IB/hfi1: On error, fix use after free during user context setup
During base context setup, if setup_base_ctxt() fails, the context is
deallocated. This is incorrect because the context is referenced on
return, to notify any waiting subcontext. If there are no subcontexts
the pointer will be invalid.
Reorganize the error path so that deallocate_ctxt() is called after all
the possible subcontexts have been notified.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Alex Estrin [Tue, 26 Sep 2017 13:06:22 +0000 (06:06 -0700)]
Revert "IB/ipoib: Update broadcast object if PKey value was changed in index 0"
commit
9a9b8112699d will cause core to fail UD QP from being destroyed
on ipoib unload, therefore cause resources leakage.
On pkey change event above patch modifies mgid before calling underlying
driver to detach it from QP. Drivers' detach_mcast() will fail to find
modified mgid it was never given to attach in a first place.
Core qp->usecnt will never go down, so ib_destroy_qp() will fail.
IPoIB driver actually does take care of new broadcast mgid based on new
pkey by destroying an old mcast object in ipoib_mcast_dev_flush())
....
if (priv->broadcast) {
rb_erase(&priv->broadcast->rb_node, &priv->multicast_tree);
list_add_tail(&priv->broadcast->list, &remove_list);
priv->broadcast = NULL;
}
...
then in restarted ipoib_macst_join_task() creating a new broadcast mcast
object, sending join request and on completion tells the driver to attach
to reinitialized QP:
...
if (!priv->broadcast) {
...
broadcast = ipoib_mcast_alloc(dev, 0);
...
memcpy(broadcast->mcmember.mgid.raw, priv->dev->broadcast + 4,
sizeof (union ib_gid));
priv->broadcast = broadcast;
...
Fixes:
9a9b8112699d ("IB/ipoib: Update broadcast object if PKey value was changed in index 0")
Cc: stable@vger.kernel.org
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Kamenee Arumugam [Tue, 26 Sep 2017 13:06:15 +0000 (06:06 -0700)]
IB/hfi1: Return correct value in general interrupt handler
The general interrupt handler returns IRQ_HANDLED whether an IRQ
was handled or not.
Determine if an IRQ was handled and return the correct value.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Kamenee Arumugam <kamenee.arumugam@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Jan Sokolowski [Tue, 26 Sep 2017 13:06:09 +0000 (06:06 -0700)]
IB/hfi1: Check eeprom config partition validity
Relying on a trailing magic value is incorrect. There are instances where
this is not present as trailing magic value has a specific purpose which is
not partition validation. Instead use the header magic value which is
present in all variants of the platform configuration and is intended for
validation. This is also used in other locations in the driver.
Fixes:
bc5214ee2922 (IB/hfi1: Handle missing magic values in config file)
Reviewed-by: Jakub Byczkowski <jakub.byczkowski@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Sebastian Sanchez [Tue, 26 Sep 2017 13:06:03 +0000 (06:06 -0700)]
IB/hfi1: Only reset QSFP after link up and turn off AOC TX
QSFP reset enables AOC transmitters by default. They should be off
before moving to high power mode to complete the setup. There is no
need to reset the QSFP during LNI failure as it was reset at link down.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Jakub Byczkowski <jakub.byczkowski@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / log