GitHub/LineageOS/G12/android_kernel_amlogic_linux-4.9.git
13 years agoforcedeth: Support for byte queue limits
Tom Herbert [Mon, 28 Nov 2011 16:33:23 +0000 (16:33 +0000)]
forcedeth: Support for byte queue limits

Changes to forcedeth to use byte queue limits.

Signed-off-by: Tom Herbert <therbert@google.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoe1000e: Support for byte queue limits
Tom Herbert [Mon, 28 Nov 2011 16:33:16 +0000 (16:33 +0000)]
e1000e: Support for byte queue limits

Changes to e1000e to use byte queue limits.

Signed-off-by: Tom Herbert <therbert@google.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobql: Byte queue limits
Tom Herbert [Mon, 28 Nov 2011 16:33:09 +0000 (16:33 +0000)]
bql: Byte queue limits

Networking stack support for byte queue limits, uses dynamic queue
limits library.  Byte queue limits are maintained per transmit queue,
and a dql structure has been added to netdev_queue structure for this
purpose.

Configuration of bql is in the tx-<n> sysfs directory for the queue
under the byte_queue_limits directory.  Configuration includes:
limit_min, bql minimum limit
limit_max, bql maximum limit
hold_time, bql slack hold time

Also under the directory are:
limit, current byte limit
inflight, current number of bytes on the queue

Signed-off-by: Tom Herbert <therbert@google.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoxps: Add xps_queue_release function
Tom Herbert [Mon, 28 Nov 2011 16:33:02 +0000 (16:33 +0000)]
xps: Add xps_queue_release function

This patch moves the xps specific parts in netdev_queue_release into
its own function which netdev_queue_release can call.  This allows
netdev_queue_release to be more generic (for adding new attributes
to tx queues).

Signed-off-by: Tom Herbert <therbert@google.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet: Add netdev interfaces for recording sends/comp
Tom Herbert [Mon, 28 Nov 2011 16:32:52 +0000 (16:32 +0000)]
net: Add netdev interfaces for recording sends/comp

Add interfaces for drivers to call for recording number of packets and
bytes at send time and transmit completion.  Also, added a function to
"reset" a queue.  These will be used by Byte Queue Limits.

Signed-off-by: Tom Herbert <therbert@google.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet: Add queue state xoff flag for stack
Tom Herbert [Mon, 28 Nov 2011 16:32:44 +0000 (16:32 +0000)]
net: Add queue state xoff flag for stack

Create separate queue state flags so that either the stack or drivers
can turn on XOFF.  Added a set of functions used in the stack to determine
if a queue is really stopped (either by stack or driver)

Signed-off-by: Tom Herbert <therbert@google.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agodql: Dynamic queue limits
Tom Herbert [Mon, 28 Nov 2011 16:32:35 +0000 (16:32 +0000)]
dql: Dynamic queue limits

Implementation of dynamic queue limits (dql).  This is a libary which
allows a queue limit to be dynamically managed.  The goal of dql is
to set the queue limit, number of objects to the queue, to be minimized
without allowing the queue to be starved.

dql would be used with a queue which has these properties:

1) Objects are queued up to some limit which can be expressed as a
   count of objects.
2) Periodically a completion process executes which retires consumed
   objects.
3) Starvation occurs when limit has been reached, all queued data has
   actually been consumed but completion processing has not yet run,
   so queuing new data is blocked.
4) Minimizing the amount of queued data is desirable.

A canonical example of such a queue would be a NIC HW transmit queue.

The queue limit is dynamic, it will increase or decrease over time
depending on the workload.  The queue limit is recalculated each time
completion processing is done.  Increases occur when the queue is
starved and can exponentially increase over successive intervals.
Decreases occur when more data is being maintained in the queue than
needed to prevent starvation.  The number of extra objects, or "slack",
is measured over successive intervals, and to avoid hysteresis the
limit is only reduced by the miminum slack seen over a configurable
time period.

dql API provides routines to manage the queue:
- dql_init is called to intialize the dql structure
- dql_reset is called to reset dynamic values
- dql_queued called when objects are being enqueued
- dql_avail returns availability in the queue
- dql_completed is called when objects have be consumed in the queue

Configuration consists of:
- max_limit, maximum limit
- min_limit, minimum limit
- slack_hold_time, time to measure instances of slack before reducing
  queue limit

Signed-off-by: Tom Herbert <therbert@google.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet: add calxeda xgmac ethernet driver
Rob Herring [Tue, 22 Nov 2011 17:18:19 +0000 (17:18 +0000)]
net: add calxeda xgmac ethernet driver

Add support for the XGMAC 10Gb ethernet device in the Calxeda Highbank
SOC.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agocorral some wayward N/A fw_version dust bunnies
Rick Jones [Tue, 22 Nov 2011 14:06:26 +0000 (14:06 +0000)]
corral some wayward N/A fw_version dust bunnies

Round-up some wayward "N/A" fw_version dust bunnies as part of that
clean-up.

Signed-off-by: Rick Jones <rick.jones2@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agotcp: do not scale TSO segment size with reordering degree
Neal Cardwell [Mon, 21 Nov 2011 17:15:14 +0000 (17:15 +0000)]
tcp: do not scale TSO segment size with reordering degree

Since 2005 (c1b4a7e69576d65efc31a8cea0714173c2841244)
tcp_tso_should_defer has been using tcp_max_burst() as a target limit
for deciding how large to make outgoing TSO packets when not using
sysctl_tcp_tso_win_divisor. But since 2008
(dd9e0dda66ba38a2ddd1405ac279894260dc5c36) tcp_max_burst() returns the
reordering degree. We should not have tcp_tso_should_defer attempt to
build larger segments just because there is more reordering. This
commit splits the notion of deferral size used in TSO from the notion
of burst size used in cwnd moderation, and returns the TSO deferral
limit to its original value.

Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoatm: br2684: Avoid alignment issues
Pascal Hambourg [Wed, 17 Aug 2011 06:37:52 +0000 (08:37 +0200)]
atm: br2684: Avoid alignment issues

Use memcmp() instead of cast to u16 when checking the PAD field.

Signed-off-by: Pascal Hambourg <pascal@plouf.fr.eu.org>
Signed-off-by: chas williams - CONTRACTOR <chas@cmf.nrl.navy.mil>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoatm: br2684: Make headroom and hard_header_len depend on the payload type
Pascal Hambourg [Wed, 17 Aug 2011 06:37:18 +0000 (08:37 +0200)]
atm: br2684: Make headroom and hard_header_len depend on the payload type

Routed payload requires less headroom than bridged payload.
So do not reallocate headroom if not needed.
Also, add worst case AAL5 overhead to netdev->hard_header_len.

Signed-off-by: Pascal Hambourg <pascal@plouf.fr.eu.org>
Signed-off-by: chas williams - CONTRACTOR <chas@cmf.nrl.navy.mil>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet: optimize socket timestamping
Eric Dumazet [Mon, 28 Nov 2011 12:04:18 +0000 (12:04 +0000)]
net: optimize socket timestamping

We can test/set multiple bits from sk_flags at once, to shorten a bit
socket setup/dismantle phase.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet: dont call jump_label_dec from irq context
Eric Dumazet [Mon, 28 Nov 2011 11:16:50 +0000 (11:16 +0000)]
net: dont call jump_label_dec from irq context

Igor Maravic reported an error caused by jump_label_dec() being called
from IRQ context :

 BUG: sleeping function called from invalid context at kernel/mutex.c:271
 in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper
 1 lock held by swapper/0:
  #0:  (&n->timer){+.-...}, at: [<ffffffff8107ce90>] call_timer_fn+0x0/0x340
 Pid: 0, comm: swapper Not tainted 3.2.0-rc2-net-next-mpls+ #1
Call Trace:
 <IRQ>  [<ffffffff8104f417>] __might_sleep+0x137/0x1f0
 [<ffffffff816b9a2f>] mutex_lock_nested+0x2f/0x370
 [<ffffffff810a89fd>] ? trace_hardirqs_off+0xd/0x10
 [<ffffffff8109a37f>] ? local_clock+0x6f/0x80
 [<ffffffff810a90a5>] ? lock_release_holdtime.part.22+0x15/0x1a0
 [<ffffffff81557929>] ? sock_def_write_space+0x59/0x160
 [<ffffffff815e936e>] ? arp_error_report+0x3e/0x90
 [<ffffffff810969cd>] atomic_dec_and_mutex_lock+0x5d/0x80
 [<ffffffff8112fc1d>] jump_label_dec+0x1d/0x50
 [<ffffffff81566525>] net_disable_timestamp+0x15/0x20
 [<ffffffff81557a75>] sock_disable_timestamp+0x45/0x50
 [<ffffffff81557b00>] __sk_free+0x80/0x200
 [<ffffffff815578d0>] ? sk_send_sigurg+0x70/0x70
 [<ffffffff815e936e>] ? arp_error_report+0x3e/0x90
 [<ffffffff81557cba>] sock_wfree+0x3a/0x70
 [<ffffffff8155c2b0>] skb_release_head_state+0x70/0x120
 [<ffffffff8155c0b6>] __kfree_skb+0x16/0x30
 [<ffffffff8155c119>] kfree_skb+0x49/0x170
 [<ffffffff815e936e>] arp_error_report+0x3e/0x90
 [<ffffffff81575bd9>] neigh_invalidate+0x89/0xc0
 [<ffffffff81578dbe>] neigh_timer_handler+0x9e/0x2a0
 [<ffffffff81578d20>] ? neigh_update+0x640/0x640
 [<ffffffff81073558>] __do_softirq+0xc8/0x3a0

Since jump_label_{inc|dec} must be called from process context only,
we must defer jump_label_dec() if net_disable_timestamp() is called
from interrupt context.

Reported-by: Igor Maravic <igorm@etf.rs>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet/ethernet: convert drivers/net/ethernet/* to use module_platform_driver()
Axel Lin [Sun, 27 Nov 2011 16:44:17 +0000 (16:44 +0000)]
net/ethernet: convert drivers/net/ethernet/* to use module_platform_driver()

This patch converts the drivers in drivers/net/ethernet/* to use the
module_platform_driver() macro which makes the code smaller and a bit
simpler.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Pantelis Antoniou <pantelis.antoniou@gmail.com>
Cc: Vitaly Bordug <vbordug@ru.mvista.com>
Cc: Wan ZongShun <mcuos.com@gmail.com>
Cc: Nicolas Pitre <nico@fluxnic.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Jiri Pirko <jpirko@redhat.com>
Cc: Daniel Hellstrom <daniel@gaisler.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Tobias Klauser <tklauser@distanz.ch>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Richard Cochran <richard.cochran@omicron.at>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Sebastian Poehn <sebastian.poehn@belden.com>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl>
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet/can: convert drivers/net/can/* to use module_platform_driver()
Axel Lin [Sun, 27 Nov 2011 15:42:31 +0000 (15:42 +0000)]
net/can: convert drivers/net/can/* to use module_platform_driver()

This patch converts the drivers in drivers/net/can/* to use the
module_platform_driver() macro which makes the code smaller and a bit
simpler.

Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Bhupesh Sharma <bhupesh.sharma@st.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Paul Bolle <pebolle@tiscali.nl>
Cc: Kurt Van Dijck <kurt.van.dijck@eia.be>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoNET: NETROM: Fix formatting.
Ralf Baechle [Thu, 24 Nov 2011 23:54:10 +0000 (23:54 +0000)]
NET: NETROM: Fix formatting.

The Linux coding style wants the return statement on its own line.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoNET: NETROM: Cleanup argument SIOCADDRT ioctl argument checking.
Ralf Baechle [Thu, 24 Nov 2011 23:09:00 +0000 (23:09 +0000)]
NET: NETROM: Cleanup argument SIOCADDRT ioctl argument checking.

nr_route.ndigis is unsigned int so the nr_route.ndigis < 0 expression is
never true and can be dropped.  Doing the nr_ax25_dev_get call later
allows the nr_route.ndigis test to bail out without having to dev_put.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Thomas Osterried <thomas@osterried.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoNET: NETROM: When adding a route verify length of mnemonic string.
Ralf Baechle [Thu, 24 Nov 2011 23:08:49 +0000 (23:08 +0000)]
NET: NETROM: When adding a route verify length of mnemonic string.

struct nr_route_struct's mnemonic permits a string of up to 7 bytes to be
used.  If userland passes a not zero terminated string to the kernel adding
a node to the routing table might result in the kernel attempting to read
copy a too long string.

Mnemonic is part of the NET/ROM routing protocol; NET/ROM routing table
updates only broadcast 6 bytes.  The 7th byte in the mnemonic array exists
only as a \0 termination character for the kernel code's convenience.

Fixed by rejecting mnemonic strings that have no terminating \0 in the first
7 characters.  Do this test only NETROM_NODE to avoid breaking NETROM_NEIGH
where userland might passing an uninitialized mnemonic field.

Initial patch by Dan Carpenter <dan.carpenter@oracle.com>.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Walter Harms <wharms@bfs.de>
Cc: Thomas Osterried <thomas@osterried.de>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoNET: AX.25: Check ioctl arguments to avoid overflows further down the road.
Ralf Baechle [Thu, 24 Nov 2011 06:12:59 +0000 (06:12 +0000)]
NET: AX.25: Check ioctl arguments to avoid overflows further down the road.

Very large, nonsenical arguments or use in very extreme conditions could
result in integer overflows.  Check ioctls arguments to avoid such
overflows and return -EINVAL for too large arguments.

To allow the use of AX.25 for even the most extreme setup (think packet
radio to the Phase 5E mars probe) we make no further attempt to clamp the
argument range.

Originally reported by Fan Long <longfancn@gmail.com> and a first patch
was sent by Xi Wang <xi.wang@gmail.com>.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Xi Wang <xi.wang@gmail.com>
Cc: Joerg Reuter <jreuter@yaina.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Thomas Osterried <thomas@osterried.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agodsa: Move switch drivers to new directory drivers/net/dsa
Ben Hutchings [Sun, 27 Nov 2011 17:08:33 +0000 (17:08 +0000)]
dsa: Move switch drivers to new directory drivers/net/dsa

Support for specific hardware belongs under drivers/net/ not net/.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agodsa: Move all definitions needed by drivers into <net/dsa.h>
Ben Hutchings [Sun, 27 Nov 2011 17:06:08 +0000 (17:06 +0000)]
dsa: Move all definitions needed by drivers into <net/dsa.h>

Any headers included by drivers should be under include/, and
any definitions they use are not really private to the core as
the name "dsa_priv.h" suggests.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agodsa: Remove unnecessary exports
Ben Hutchings [Sun, 27 Nov 2011 17:05:06 +0000 (17:05 +0000)]
dsa: Remove unnecessary exports

I mistakenly exported functions from slave.c that are only called from
dsa.c, part of the same module.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoMerge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville...
David S. Miller [Tue, 29 Nov 2011 00:21:10 +0000 (19:21 -0500)]
Merge branch 'for-davem' of git://git./linux/kernel/git/linville/wireless-next

13 years agotg3: Scale back code that modifies MRRS
Matt Carlson [Mon, 28 Nov 2011 09:41:04 +0000 (09:41 +0000)]
tg3: Scale back code that modifies MRRS

Tg3 normally gets a performance boost by increasing the PCI Maximum Read
Request Size (MRRS) to 4k.  Unfortunately, this is causing some problems
on particular hardware platforms.  This patch removes all code that
modifies the MRRS except for one case.

As part of a solution to fix an internal FIFO problem on the 5719, the
driver artificially capped the MRRS to 2k for the entire 5719, and later
5720, ASIC revs.  This was overly aggressive and only really needed to
be done for the 5719 A0.  In the spirit of the rest of this patch, the
driver will only reprogram the MRRS for this device if the value exceeds
the 2k cap.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agotg3: Fix TSO CAP for 5704 devs w / ASF enabled
Matt Carlson [Mon, 28 Nov 2011 09:41:03 +0000 (09:41 +0000)]
tg3: Fix TSO CAP for 5704 devs w / ASF enabled

On the earliest TSO capable devices, TSO was accomplished through
firmware.  The TSO cannot coexist with ASF management firmware though.
The tg3 driver determines whether or not ASF is enabled by calling
tg3_get_eeprom_hw_cfg(), which checks a particular bit of NIC memory.
Commit dabc5c670d3f86d15ee4f42ab38ec5bd2682487d, entitled "tg3: Move
TSO_CAPABLE assignment", accidentally moved the code that determines
TSO capabilities earlier than the call to tg3_get_eeprom_hw_cfg().  As a
consequence, the driver was attempting to determine TSO capabilities
before it had all the data it needed to make the decision.

This patch fixes the problem by revisiting and reevaluating the decision
after tg3_get_eeprom_hw_cfg() is called.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agosch_sfb: use skb_flow_dissect()
Eric Dumazet [Mon, 28 Nov 2011 05:25:02 +0000 (05:25 +0000)]
sch_sfb: use skb_flow_dissect()

Current SFB double hashing is not fulfilling SFB theory, if two flows
share same rxhash value.

Using skb_flow_dissect() permits to really have better hash dispersion,
and get tunnelling support as well.

Double hashing point was mentioned by Florian Westphal

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agocls_flow: use skb_flow_dissect()
Eric Dumazet [Mon, 28 Nov 2011 05:24:18 +0000 (05:24 +0000)]
cls_flow: use skb_flow_dissect()

Instead of using a custom flow dissector, use skb_flow_dissect() and
benefit from tunnelling support.

This lack of tunnelling support was mentioned by Dan Siemon.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet: use skb_flow_dissect() in __skb_get_rxhash()
Eric Dumazet [Mon, 28 Nov 2011 05:23:23 +0000 (05:23 +0000)]
net: use skb_flow_dissect() in __skb_get_rxhash()

No functional changes.

This uses the code we factorized in skb_flow_dissect()

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet: introduce skb_flow_dissect()
Eric Dumazet [Mon, 28 Nov 2011 05:22:18 +0000 (05:22 +0000)]
net: introduce skb_flow_dissect()

We use at least two flow dissectors in network stack, with known
limitations and code duplication.

Introduce skb_flow_dissect() to factorize this, highly inspired from
existing dissector from __skb_get_rxhash()

Note : We extensively use skb_header_pointer(), this permits us to not
touch skb at all.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobnx2x: Change value comparison order
Yaniv Rosner [Mon, 28 Nov 2011 00:49:53 +0000 (00:49 +0000)]
bnx2x: Change value comparison order

Change comparison order such that the variable will come before the compared value.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobnx2x: Cosmetic changes
Yaniv Rosner [Mon, 28 Nov 2011 00:49:52 +0000 (00:49 +0000)]
bnx2x: Cosmetic changes

Fix spelling, alignment, empty lines, relocate the is_4_port_mode function, and split bnx2x_link_status_update function.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobnx2x: Fix self test of BCM57800
Yaniv Rosner [Mon, 28 Nov 2011 00:49:51 +0000 (00:49 +0000)]
bnx2x: Fix self test of BCM57800

Fix the MAC test of the 1G port of the BCM57800 to use the UMAC instead of the XMAC.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobnx2x: Add known PHY type check
Yaniv Rosner [Mon, 28 Nov 2011 00:49:50 +0000 (00:49 +0000)]
bnx2x: Add known PHY type check

The populate function will fail in case an unknown external PHY is detected.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobnx2x: Change Warpcore MDIO work around mode
Yaniv Rosner [Mon, 28 Nov 2011 00:49:49 +0000 (00:49 +0000)]
bnx2x: Change Warpcore MDIO work around mode

This patch enables the usage of simpler MDC/MDIO work-around when accessing Warpcore registers.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobnx2x: Fix BCM84833 link and LED behavior
Yaniv Rosner [Mon, 28 Nov 2011 00:49:48 +0000 (00:49 +0000)]
bnx2x: Fix BCM84833 link and LED behavior

This patch contain several fixes for the BCM84833. This PHY is still not in bnx2x production, hence this patch can be considered as enhancement.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobnx2x: Warpcore HW reset following fan failure
Yaniv Rosner [Mon, 28 Nov 2011 00:49:47 +0000 (00:49 +0000)]
bnx2x: Warpcore HW reset following fan failure

Put Warpcore in low power mode in case of fan failure to reduce heat.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobnx2x: ETS changes
Yaniv Rosner [Mon, 28 Nov 2011 00:49:46 +0000 (00:49 +0000)]
bnx2x: ETS changes

Fix a problem when new traffic class is created with 0% BW, the ETS is not conforming.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobnx2x: PFC changes
Yaniv Rosner [Mon, 28 Nov 2011 00:49:45 +0000 (00:49 +0000)]
bnx2x: PFC changes

Change BRB to work in per class guaranteed mode and handle cases for BW 0%.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agotcp: tcp_sendmsg() wrong access to sk_route_caps
Eric Dumazet [Mon, 28 Nov 2011 00:27:47 +0000 (00:27 +0000)]
tcp: tcp_sendmsg() wrong access to sk_route_caps

Now sk_route_caps is u64, its dangerous to use an integer to store
result of an AND operator. It wont work if NETIF_F_SG is moved on the
upper part of u64.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
John W. Linville [Mon, 28 Nov 2011 19:11:18 +0000 (14:11 -0500)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-next into for-davem

13 years agonet/irda: convert drivers/net/irda/* to use module_platform_driver()
Axel Lin [Mon, 28 Nov 2011 01:29:11 +0000 (20:29 -0500)]
net/irda: convert drivers/net/irda/* to use module_platform_driver()

This patch converts the drivers in drivers/net/irda/* to use the
module_platform_driver() macro which makes the code smaller and a bit
simpler.

Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agotcp: skip cwnd moderation in TCP_CA_Open in tcp_try_to_open
Neal Cardwell [Wed, 16 Nov 2011 08:58:05 +0000 (08:58 +0000)]
tcp: skip cwnd moderation in TCP_CA_Open in tcp_try_to_open

The problem: Senders were overriding cwnd values picked during an undo
by calling tcp_moderate_cwnd() in tcp_try_to_open().

The fix: Don't moderate cwnd in tcp_try_to_open() if we're in
TCP_CA_Open, since doing so is generally unnecessary and specifically
would override a DSACK-based undo of a cwnd reduction made in fast
recovery.

Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agotcp: allow undo from reordered DSACKs
Neal Cardwell [Wed, 16 Nov 2011 08:58:04 +0000 (08:58 +0000)]
tcp: allow undo from reordered DSACKs

Previously, SACK-enabled connections hung around in TCP_CA_Disorder
state while snd_una==high_seq, just waiting to accumulate DSACKs and
hopefully undo a cwnd reduction. This could and did lead to the
following unfortunate scenario: if some incoming ACKs advance snd_una
beyond high_seq then we were setting undo_marker to 0 and moving to
TCP_CA_Open, so if (due to reordering in the ACK return path) we
shortly thereafter received a DSACK then we were no longer able to
undo the cwnd reduction.

The change: Simplify the congestion avoidance state machine by
removing the behavior where SACK-enabled connections hung around in
the TCP_CA_Disorder state just waiting for DSACKs. Instead, when
snd_una advances to high_seq or beyond we typically move to
TCP_CA_Open immediately and allow an undo in either TCP_CA_Open or
TCP_CA_Disorder if we later receive enough DSACKs.

Other patches in this series will provide other changes that are
necessary to fully fix this problem.

Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agotcp: use SACKs and DSACKs that arrive on ACKs below snd_una
Neal Cardwell [Wed, 16 Nov 2011 08:58:03 +0000 (08:58 +0000)]
tcp: use SACKs and DSACKs that arrive on ACKs below snd_una

The bug: When the ACK field is below snd_una (which can happen when
ACKs are reordered), senders ignored DSACKs (preventing undo) and did
not call tcp_fastretrans_alert, so they did not increment
prr_delivered to reflect newly-SACKed sequence ranges, and did not
call tcp_xmit_retransmit_queue, thus passing up chances to send out
more retransmitted and new packets based on any newly-SACKed packets.

The change: When the ACK field is below snd_una (the "old_ack" goto
label), call tcp_fastretrans_alert to allow undo based on any
newly-arrived DSACKs and try to send out more packets based on
newly-SACKed packets.

Other patches in this series will provide other changes that are
necessary to fully fix this problem.

Signed-off-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agotcp: use DSACKs that arrive when packets_out is 0
Neal Cardwell [Wed, 16 Nov 2011 08:58:02 +0000 (08:58 +0000)]
tcp: use DSACKs that arrive when packets_out is 0

The bug: Senders ignored DSACKs after recovery when there were no
outstanding packets (a common scenario for HTTP servers).

The change: when there are no outstanding packets (the "no_queue" goto
label), call tcp_fastretrans_alert() in order to use DSACKs to undo
congestion window reductions.

Other patches in this series will provide other changes that are
necessary to fully fix this problem.

Signed-off-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agotcp: make is_dupack a parameter to tcp_fastretrans_alert()
Neal Cardwell [Wed, 16 Nov 2011 08:58:01 +0000 (08:58 +0000)]
tcp: make is_dupack a parameter to tcp_fastretrans_alert()

Allow callers to decide whether an ACK is a duplicate ACK. This is a
prerequisite to allowing fastretrans_alert to be called from new
contexts, such as the no_queue and old_ack code paths, from which we
have extra info that tells us whether an ACK is a dupack.

Signed-off-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet/mlx4_en: bug fix for the case of vlan id 0 and UP 0
Amir Vadai [Sat, 26 Nov 2011 19:55:23 +0000 (19:55 +0000)]
net/mlx4_en: bug fix for the case of vlan id 0 and UP 0

When using vlan 0 and UP 0, vlan header wasn't placed.

Signed-off-by: Amir Vadai <amirv@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet/mlx4_en: adding loopback support
Amir Vadai [Sat, 26 Nov 2011 19:55:19 +0000 (19:55 +0000)]
net/mlx4_en: adding loopback support

Device must be in promiscuous mode or DMAC must be same as the host MAC, or
else packet will be dropped by the HW rx filtering.

Signed-off-by: Amir Vadai <amirv@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet/mlx4_en: fix WOL handlers were always looking at port2 capability bit
Oren Duer [Sat, 26 Nov 2011 19:55:15 +0000 (19:55 +0000)]
net/mlx4_en: fix WOL handlers were always looking at port2 capability bit

There are 2 capability bits for WOL, one for each port.
WOL handlers were looking only on the second bit, regardless of the port.

Signed-off-by: Oren Duer <oren@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet/mlx4_en: using non collapsed CQ on TX
Yevgeny Petrilin [Sat, 26 Nov 2011 19:55:10 +0000 (19:55 +0000)]
net/mlx4_en: using non collapsed CQ on TX

Moving to regular Completion Queue implementation (not collapsed)
Completion for each transmitted packet is written to new entry.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet/mlx4_en: fix sparse warning on a cast which truncates bits from constant value
Or Gerlitz [Sat, 26 Nov 2011 19:55:06 +0000 (19:55 +0000)]
net/mlx4_en: fix sparse warning on a cast which truncates bits from constant value

the MLX4_EN_WOL_DO_MODIFY flag which is defined through enum targets
bit 63, this triggers a "cast truncate bits from constant value
(8000000000000000 becomes 0)" warning from sparse, fix that by using
define instead of enum.

Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet/mlx4: fix UDP RSS related settings
Or Gerlitz [Sat, 26 Nov 2011 19:55:02 +0000 (19:55 +0000)]
net/mlx4: fix UDP RSS related settings

Using RSS which takes into account UDP headers is controlled by
a module param, fix the setting of the HW RSS context to align
with that scheme. So far it was uncoditionally allowing hashing
on the UDP headers.

Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet/mlx4: move RSS related definitions to be global
Or Gerlitz [Sat, 26 Nov 2011 19:54:58 +0000 (19:54 +0000)]
net/mlx4: move RSS related definitions to be global

Towards adding RSS support for IB drivers/application who use
the mlx4 HW, make the RSS related definitions global and change
the mlx4_en driver to use them.

Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoisdn/gigaset: report ISDN4Linux interface only once
Tilman Schmidt [Sun, 27 Nov 2011 07:39:22 +0000 (07:39 +0000)]
isdn/gigaset: report ISDN4Linux interface only once

Move the "ISDN4Linux interface" message from device registration,
where it is emitted for each device, to driver registration, where
it is emitted only once, for consistency with the CAPI variant.

Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoifenslave: Fix unused variable warnings.
David S. Miller [Sat, 26 Nov 2011 21:54:17 +0000 (16:54 -0500)]
ifenslave: Fix unused variable warnings.

Documentation/networking/ifenslave.c: In function ‘if_getconfig’:
Documentation/networking/ifenslave.c:508:14: warning: variable ‘mtu’ set but not used [-Wunused-but-set-variable]
Documentation/networking/ifenslave.c:508:6: warning: variable ‘metric’ set but not used [-Wunused-but-set-variable]

The purpose of this function is to simply print out the values
it probes, so...

Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoatm: eliminate atm_guess_pdu2truesize()
chas williams - CONTRACTOR [Tue, 22 Nov 2011 12:51:56 +0000 (12:51 +0000)]
atm: eliminate atm_guess_pdu2truesize()

Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agovirtio_net: return already tracked tx_fifo_errors via virtnet_getstats()
Rick Jones [Mon, 21 Nov 2011 09:28:17 +0000 (09:28 +0000)]
virtio_net: return already tracked tx_fifo_errors via virtnet_getstats()

Tx_fifo_errors are tracked in start_xmit_ for virtio_net, but not
reported in the tallies returned by virtnet_stats().  Return them
as the rx "sub-stats" rx_length_errors and rx_frame_errors are.

Signed-off-by: Rick Jones <rick.jones2@hp.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoray_cs: Fix array bounds warnings.
David S. Miller [Sat, 26 Nov 2011 20:41:29 +0000 (15:41 -0500)]
ray_cs: Fix array bounds warnings.

rx_msg is defined to have a 1 entry array at the end, so gcc warns:

drivers/net/wireless/ray_cs.c: In function ‘rx_authenticate’:
drivers/net/wireless/ray_cs.c:2436:3: warning: array subscript is above array bounds [-Warray-bounds]
drivers/net/wireless/ray_cs.c:2436:3: warning: array subscript is above array bounds [-Warray-bounds]
drivers/net/wireless/ray_cs.c:2436:3: warning: array subscript is above array bounds [-Warray-bounds]
drivers/net/wireless/ray_cs.c:2436:3: warning: array subscript is above array bounds [-Warray-bounds]
drivers/net/wireless/ray_cs.c:2436:3: warning: array subscript is above array bounds [-Warray-bounds]
drivers/net/wireless/ray_cs.c:2439:15: warning: array subscript is above array bounds [-Warray-bounds]
drivers/net/wireless/ray_cs.c:2452:16: warning: array subscript is above array bounds [-Warray-bounds]
drivers/net/wireless/ray_cs.c:2453:18: warning: array subscript is above array bounds [-Warray-bounds]
drivers/net/wireless/ray_cs.c:2453:32: warning: array subscript is above array bounds [-Warray-bounds]

Use a zero length array and rename to "ray_rx_msg" to make sure we hit all
of the necessary cases.

Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoairo: Fix array bounds warning when moving packet payload.
David S. Miller [Sat, 26 Nov 2011 20:35:10 +0000 (15:35 -0500)]
airo: Fix array bounds warning when moving packet payload.

drivers/net/wireless/airo.c: In function ‘encapsulate’:
drivers/net/wireless/airo.c:1421:15: warning: array subscript is above array bounds [-Warray-bounds]
drivers/net/wireless/airo.c: In function ‘decapsulate’:
drivers/net/wireless/airo.c:1509:16: warning: array subscript is above array bounds [-Warray-bounds]

Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoKSZ8851-SNL: Add ethtool support for EEPROM via eeprom_93cx6
Ben Dooks [Mon, 21 Nov 2011 08:58:00 +0000 (08:58 +0000)]
KSZ8851-SNL: Add ethtool support for EEPROM via eeprom_93cx6

Add ethtool EEPROM read/write support using the eeprom_93cx6
library instead of open-coding the functions.

Depends on eeprom_93cx6 driver getting EEPROM write support.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Simtec Linux Team <linux@simtec.co.uk>
[sboyd@codeaurora.org: Removed previous eeprom implementation]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoKSZ8851-SNL: Fix MAC address change problem
Tristram Ha [Mon, 21 Nov 2011 08:57:59 +0000 (08:57 +0000)]
KSZ8851-SNL: Fix MAC address change problem

When device is off it is under power saving mode. Changing the MAC address
in that situation will result in the device not communicating as the first
write to the MAC address register is not executed.

Signed-off-by: Tristram Ha <Tristram.Ha@micrel.com>
[ben@simtec.co.uk: cleaned up header]
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoKSZ8851-SNL: Add support for EEPROM MAC address
Ben Dooks [Mon, 21 Nov 2011 08:57:58 +0000 (08:57 +0000)]
KSZ8851-SNL: Add support for EEPROM MAC address

Add support for reading the MAC address from the system registers if there
is an EEPROM present. This involves caching the KS_CCR register for later
use (will also be useful for ETHTOOL support) and adding a print to say
that there is an EEPROM present.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoeeprom_93cx6: Add write support
Ben Dooks [Mon, 21 Nov 2011 08:57:57 +0000 (08:57 +0000)]
eeprom_93cx6: Add write support

Add support for writing data to EEPROM.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Cc: Wolfram Sang <w.sang@pengutronix.de>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Linux Kernel <linux-kernel@vger.kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoeeprom_93cx6: Add data direction control.
Ben Dooks [Mon, 21 Nov 2011 08:57:56 +0000 (08:57 +0000)]
eeprom_93cx6: Add data direction control.

Some devices need to know if the data is to be output or read, so add a
data direction into the eeprom structure to tell the driver whether the
data line should be driven.

The user in this case is the Micrel KS8851 which has a direction
control for the EEPROM data line and thus needs to know whether
to drive it (writing) or to tristate it for receiving.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Cc: Wolfram Sang <w.sang@pengutronix.de>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobe2net: Fix non utilization of RX queues
Padmanabh Ratnakar [Fri, 25 Nov 2011 05:48:53 +0000 (05:48 +0000)]
be2net: Fix non utilization of RX queues

When non power of two MSIX vectors are given to driver, some RX queues
are not utilized. Program RSS table in such a way that all queues
are utilized.

Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobe2net: Use new hash key
Padmanabh Ratnakar [Fri, 25 Nov 2011 05:48:38 +0000 (05:48 +0000)]
be2net: Use new hash key

This new hash key gives better distribution of packets across RX
queues.

Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobe2net: Add error handling for Lancer
Padmanabh Ratnakar [Fri, 25 Nov 2011 05:48:23 +0000 (05:48 +0000)]
be2net: Add error handling for Lancer

Detect error in Lancer by polling a HW register and
recover from this error if it is recoverable.

Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobe2net: Fix error recovery paths
Padmanabh Ratnakar [Fri, 25 Nov 2011 05:48:06 +0000 (05:48 +0000)]
be2net: Fix error recovery paths

When TX queues are created again after error recovery,
netif_set_real_num_tx_queues() is invoked to update number of real
TX queues created. rtnl lock needs to be held when invoking this routine.

Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobe2net: Move to new SR-IOV implementation in Lancer
Padmanabh Ratnakar [Fri, 25 Nov 2011 05:47:26 +0000 (05:47 +0000)]
be2net: Move to new SR-IOV implementation in Lancer

SR-IOV implementation is Lancer has changed in following ways -
1)PF driver assigns one MAC addresses for VF using COMMON_SET_IFACE_MAC_LIST.
2)VF driver queries its MAC address using COMMON_GET_IFACE_MAC_LIST command
and assigns it to its interface.

Signed-off-by: Mammatha Edhala <mammatha.edhala@emulex.com>
Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobonding: Remove obsolete source file 'bond_ipv6.c'
Ben Hutchings [Thu, 24 Nov 2011 08:16:21 +0000 (08:16 +0000)]
bonding: Remove obsolete source file 'bond_ipv6.c'

This file is now unused and should have been removed by commit
7c89943236750537d26421d9bbb6f6575e2d1e1b ("bonding, ipv4, ipv6, vlan:
Handle NETDEV_BONDING_FAILOVER like NETDEV_NOTIFY_PEERS").

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet: Use IS_ENABLED() in netdevice.h as appropriate
Ben Hutchings [Fri, 25 Nov 2011 14:40:26 +0000 (14:40 +0000)]
net: Use IS_ENABLED() in netdevice.h as appropriate

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agodsa: Allow core and drivers to be built as modules
Ben Hutchings [Fri, 25 Nov 2011 14:38:38 +0000 (14:38 +0000)]
dsa: Allow core and drivers to be built as modules

Change the kconfig types to tristate and adjust the condition for
declaring net_device::dsa_ptr to allow for this.

Adjust the makefile so that if NET_DSA_MV88E6123_61_65=y and
NET_DSA_MV88E6131=m or vice versa then both drivers are built-in.  We
could leave these options as bool and make NET_DSA_MV88E6XXX a
user-selected option, but that would break existing configurations.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agodsa: Define module author, description, license and aliases for drivers
Ben Hutchings [Fri, 25 Nov 2011 14:37:16 +0000 (14:37 +0000)]
dsa: Define module author, description, license and aliases for drivers

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agomv88e6xxx: Combine mv88e6131 and mv88e612_61_65 drivers
Ben Hutchings [Fri, 25 Nov 2011 14:36:19 +0000 (14:36 +0000)]
mv88e6xxx: Combine mv88e6131 and mv88e612_61_65 drivers

These drivers share a lot of code, so if we make them modular they
should be built into the same module.  Therefore, link them together
and merge their respective module init and exit functions.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agodsa: Combine core and tagging code
Ben Hutchings [Fri, 25 Nov 2011 14:35:02 +0000 (14:35 +0000)]
dsa: Combine core and tagging code

These files have circular dependencies, so if we make DSA modular then
they must be built into the same module.  Therefore, link them
together and merge their respective module init and exit functions.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agodsa: Export functions from core to modules
Ben Hutchings [Fri, 25 Nov 2011 14:34:07 +0000 (14:34 +0000)]
dsa: Export functions from core to modules

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agodsa: Change dsa_uses_{dsa, trailer}_tags() into inline functions
Ben Hutchings [Fri, 25 Nov 2011 14:32:52 +0000 (14:32 +0000)]
dsa: Change dsa_uses_{dsa, trailer}_tags() into inline functions

eth_type_trans() will use these functions if DSA is enabled, which
blocks building DSA as a module.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
David S. Miller [Sat, 26 Nov 2011 19:47:03 +0000 (14:47 -0500)]
Merge git://git./linux/kernel/git/davem/net

Conflicts:
net/ipv4/inet_diag.c

13 years agonet: Revert ARCNET and PHYLIB to tristate options
Ben Hutchings [Fri, 25 Nov 2011 14:40:02 +0000 (14:40 +0000)]
net: Revert ARCNET and PHYLIB to tristate options

commit 88491d8103498a6166f70d5999902fec70924314 ("drivers/net: Kconfig
& Makefile cleanup") changed the type of these options to bool, but
they select code that could (and still can) be built as modules.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoipv4: Don't use the cached pmtu informations for input routes
Steffen Klassert [Wed, 23 Nov 2011 02:14:50 +0000 (02:14 +0000)]
ipv4: Don't use the cached pmtu informations for input routes

The pmtu informations on the inetpeer are visible for output and
input routes. On packet forwarding, we might propagate a learned
pmtu to the sender. As we update the pmtu informations of the
inetpeer on demand, the original sender of the forwarded packets
might never notice when the pmtu to that inetpeer increases.
So use the mtu of the outgoing device on packet forwarding instead
of the pmtu to the final destination.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoroute: struct rtable can be const in rt_is_input_route and rt_is_output_route
Steffen Klassert [Wed, 23 Nov 2011 02:14:15 +0000 (02:14 +0000)]
route: struct rtable can be const in rt_is_input_route and rt_is_output_route

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet: Move mtu handling down to the protocol depended handlers
Steffen Klassert [Wed, 23 Nov 2011 02:13:31 +0000 (02:13 +0000)]
net: Move mtu handling down to the protocol depended handlers

We move all mtu handling from dst_mtu() down to the protocol
layer. So each protocol can implement the mtu handling in
a different manner.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet: Rename the dst_opt default_mtu method to mtu
Steffen Klassert [Wed, 23 Nov 2011 02:12:51 +0000 (02:12 +0000)]
net: Rename the dst_opt default_mtu method to mtu

We plan to invoke the dst_opt->default_mtu() method unconditioally
from dst_mtu(). So rename the method to dst_opt->mtu() to match
the name with the new meaning.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoroute: Use the device mtu as the default for blackhole routes
Steffen Klassert [Wed, 23 Nov 2011 02:12:13 +0000 (02:12 +0000)]
route: Use the device mtu as the default for blackhole routes

As it is, we return null as the default mtu of blackhole routes.
This may lead to a propagation of a bogus pmtu if the default_mtu
method of a blackhole route is invoked. So return dst->dev->mtu
as the default mtu instead.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoMerge branch 'for_david' of git://git.open-mesh.org/linux-merge
David S. Miller [Sat, 26 Nov 2011 19:26:24 +0000 (14:26 -0500)]
Merge branch 'for_david' of git://git.open-mesh.org/linux-merge

13 years agonetns: fix proxy ARP entries listing on a netns
Jorge Boncompte [DTI2] [Fri, 25 Nov 2011 18:24:49 +0000 (13:24 -0500)]
netns: fix proxy ARP entries listing on a netns

Skip entries from foreign network namespaces.

Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet/netlabel: copy and paste bug in netlbl_cfg_unlbl_map_add()
Dan Carpenter [Wed, 23 Nov 2011 21:18:20 +0000 (21:18 +0000)]
net/netlabel: copy and paste bug in netlbl_cfg_unlbl_map_add()

This was copy and pasted from the IPv4 code.  We're calling the
ip4 version of that function and map4 is NULL.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet: mv643xx_eth: fix build error
Axel Lin [Thu, 24 Nov 2011 05:41:55 +0000 (00:41 -0500)]
net: mv643xx_eth: fix build error

Fix below build error:
  CC      drivers/net/ethernet/marvell/mv643xx_eth.o
drivers/net/ethernet/marvell/mv643xx_eth.c: In function 'mv643xx_eth_get_drvinfo':
drivers/net/ethernet/marvell/mv643xx_eth.c:1505: error: 'info' undeclared (first use in this function)
drivers/net/ethernet/marvell/mv643xx_eth.c:1505: error: (Each undeclared identifier is reported only once
drivers/net/ethernet/marvell/mv643xx_eth.c:1505: error: for each function it appears in.)
make[4]: *** [drivers/net/ethernet/marvell/mv643xx_eth.o] Error 1

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoipv4: Save nexthop address of LSRR/SSRR option to IPCB.
Li Wei [Tue, 22 Nov 2011 23:33:10 +0000 (23:33 +0000)]
ipv4: Save nexthop address of LSRR/SSRR option to IPCB.

We can not update iph->daddr in ip_options_rcv_srr(), It is too early.
When some exception ocurred later (eg. in ip_forward() when goto
sr_failed) we need the ip header be identical to the original one as
ICMP need it.

Add a field 'nexthop' in struct ip_options to save nexthop of LSRR
or SSRR option.

Signed-off-by: Li Wei <lw@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoehea: Use round_jiffies_relative to align workqueue
Anton Blanchard [Wed, 23 Nov 2011 00:13:54 +0000 (00:13 +0000)]
ehea: Use round_jiffies_relative to align workqueue

Use round_jiffies_relative to align the ehea workqueue and avoid
extra wakeups.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoehea: Reduce memory usage in buffer pools
Anton Blanchard [Wed, 23 Nov 2011 00:13:02 +0000 (00:13 +0000)]
ehea: Reduce memory usage in buffer pools

Now that we enable multiqueue by default the ehea driver is using
quite a lot of memory for its buffer pools. With 4 queues we
consume 64MB in the jumbo packet ring, 16MB in the medium packet
ring and 16MB in the tiny packet ring.

We should only fill the jumbo ring once the MTU is increased but
for now halve it's size so it consumes 32MB. Also reduce the tiny
packet ring, with 4 queues we had 16k entries which is overkill.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoqlge: fix size of external list for TX address descriptors
Thadeu Lima de Souza Cascardo [Wed, 23 Nov 2011 13:10:42 +0000 (13:10 +0000)]
qlge: fix size of external list for TX address descriptors

When transmiting a fragmented skb, qlge fills a descriptor with the
fragment addresses, after DMA-mapping them. If there are more than eight
fragments, it will use the eighth descriptor as a pointer to an external
list. After mapping this external list, called OAL to a structure
containing more descriptors, it fills it with the extra fragments.

However, considering that systems with pages larger than 8KiB would have
less than 8 fragments, which was true before commit a715dea3c8e, it
defined a macro for the OAL size as 0 in those cases.

Now, if a skb with more than 8 fragments (counting skb->data as one
fragment), this would start overwriting the list of addresses already
mapped and would make the driver fail to properly unmap the right
addresses on architectures with pages larger than 8KiB.

Besides that, the list of mappings was one size too small, since it must
have a mapping for the maxinum number of skb fragments plus one for
skb->data and another for the OAL. So, even on architectures with page
sizes 4KiB and 8KiB, a skb with the maximum number of fragments would
make the driver overwrite its counter for the number of mappings, which,
again, would make it fail to unmap the mapped DMA addresses.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobnx2x: Fix 5461x LED
Yaniv Rosner [Wed, 23 Nov 2011 03:54:08 +0000 (03:54 +0000)]
bnx2x: Fix 5461x LED

Fix port identify test on 5461x PHY by driving LEDs through MDIO.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet: treewide use of RCU_INIT_POINTER
Eric Dumazet [Wed, 23 Nov 2011 07:09:32 +0000 (07:09 +0000)]
net: treewide use of RCU_INIT_POINTER

rcu_assign_pointer(ptr, NULL) can be safely replaced by
RCU_INIT_POINTER(ptr, NULL)

(old rcu_assign_pointer() macro was testing the NULL value and could
omit the smp_wmb(), but this had to be removed because of compiler
warnings)

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoipv4 : igmp : fix error handle in ip_mc_add_src()
Jun Zhao [Tue, 22 Nov 2011 17:19:03 +0000 (17:19 +0000)]
ipv4 : igmp : fix error handle in ip_mc_add_src()

When add sources to interface failure, need to roll back the sfcount[MODE]
to before state. We need to match it corresponding.

Acked-by: David L Stevens <dlstevens@us.ibm.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Jun Zhao <mypopydev@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoipv6: tcp: fix tcp_v6_conn_request()
Eric Dumazet [Wed, 23 Nov 2011 22:29:23 +0000 (17:29 -0500)]
ipv6: tcp: fix tcp_v6_conn_request()

Since linux 2.6.26 (commit c6aefafb7ec6 : Add IPv6 support to TCP SYN
cookies), we can drop a SYN packet reusing a TIME_WAIT socket.

(As a matter of fact we fail to send the SYNACK answer)

As the client resends its SYN packet after a one second timeout, we
accept it, because first packet removed the TIME_WAIT socket before
being dropped.

This probably explains why nobody ever noticed or complained.

Reported-by: Jesse Young <jlyo@jlyo.org>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agob44: Use dev_kfree_skb_irq() in b44_tx()
Xander Hover [Wed, 23 Nov 2011 21:40:31 +0000 (16:40 -0500)]
b44: Use dev_kfree_skb_irq() in b44_tx()

Reported issues when using dev_kfree_skb() on UP systems and
systems with low numbers of cores.  dev_kfree_skb_irq() will
properly save IRQ state before freeing the skb.

Tested on 3.1.1 and 3.2_rc2

Example of reproducible trace of kernel 3.1.1
------------[ cut here ]------------
   WARNING: at kernel/softirq.c:159 local_bh_enable+0x32/0x79()
   ...
   Pid: 0, comm: swapper Not tainted 3.1.1-gentoo #1
   Call Trace:
    [<c1022970>] warn_slowpath_common+0x65/0x7a
    [<c102699e>] ? local_bh_enable+0x32/0x79
    [<c1022994>] warn_slowpath_null+0xf/0x13
    [<c102699e>] local_bh_enable+0x32/0x79
    [<c134bfd8>] destroy_conntrack+0x7c/0x9b
    [<c134890b>] nf_conntrack_destroy+0x1f/0x26
    [<c132e3a6>] skb_release_head_state+0x74/0x83
    [<c132e286>] __kfree_skb+0xb/0x6b
    [<c132e30a>] consume_skb+0x24/0x26
    [<c127c925>] b44_poll+0xaa/0x449
    [<c1333ca1>] net_rx_action+0x3f/0xea
    [<c1026a44>] __do_softirq+0x5f/0xd5
    [<c10269e5>] ? local_bh_enable+0x79/0x79
    <IRQ>  [<c1026c32>] ? irq_exit+0x34/0x8d
    [<c1003628>] ? do_IRQ+0x74/0x87
    [<c13f5329>] ? common_interrupt+0x29/0x30
    [<c1006e18>] ? default_idle+0x29/0x3e
    [<c10015a7>] ? cpu_idle+0x2f/0x5d
    [<c13e91c5>] ? rest_init+0x79/0x7b
    [<c15c66a9>] ? start_kernel+0x297/0x29c
    [<c15c60b0>] ? i386_start_kernel+0xb0/0xb7
   ---[ end trace 583f33bb1aa207a9 ]---

Signed-off-by: Xander Hover <LKML@hover.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonetfilter: Remove NOTRACK/RAW dependency on NETFILTER_ADVANCED.
David S. Miller [Wed, 23 Nov 2011 21:07:00 +0000 (16:07 -0500)]
netfilter: Remove NOTRACK/RAW dependency on NETFILTER_ADVANCED.

Distributions are using this in their default scripts, so don't hide
them behind the advanced setting.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonetprio_cgroup: Fix build break
Neil Horman [Wed, 23 Nov 2011 20:52:58 +0000 (15:52 -0500)]
netprio_cgroup: Fix build break

I broke the build with the addition of netprio_cgroups if CONFIG_CGROUPS=n.
This patch corrects it by moving the offending struct into an ifdef
CONFIG_CGROUPS block.  Also clean up a few needless defines and inline functions
that don't get called if CONFIG_CGROUPS isn't defined while Im at it.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>