Olof Johansson [Wed, 6 Sep 2017 03:41:43 +0000 (20:41 -0700)]
Merge branch 'next/dt64' into next/dt
* next/dt64: (233 commits)
arm64: dts: marvell: mcbin: enable more networking ports
arm64: dts: marvell: add a reference to the sysctrl syscon in the ppv2 node
arm64: dts: marvell: add TX interrupts for PPv2.2
arm64: dts: uniphier: add PXs3 SoC support
arm64: dts: uniphier: fix size of sdctrl node
arm64: dts: uniphier: add AIDET nodes
arm64: dts: uniphier: add reset controller node of analog amplifier
arm64: dts: marvell: add Device Tree files for Armada-8KP
arm64: dts: rockchip: add Haikou baseboard with RK3399-Q7 SoM
arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM
dt-bindings: add rk3399-q7 SoM
arm64: dts: rockchip: add rk3328-rock64 board
arm64: dts: rockchip: add rk3328 pdm node
ARM64: dts: meson-gxl-libretech-cc: Add GPIO lines names
ARM64: dts: meson-gx: Add AO CEC nodes
ARM64: dts: meson-gx: update AO clkc to new bindings
arm64: dts: rockchip: add more rk3399 iommu nodes
arm64: dts: rockchip: add rk3368 iommu nodes
arm64: dts: rockchip: add rk3328 iommu nodes
arm64: zynqmp: Add generic compatible string for I2C EEPROM
...
Olof Johansson [Fri, 1 Sep 2017 23:45:36 +0000 (16:45 -0700)]
Merge tag 'at91-ab-4.14-dt2' of git://git./linux/kernel/git/abelloni/linux into next/dt
DT for 4.14
- sama5d2: add classD, ISC and QSPI
- New SoM and board: sama5d27 SoM1
- at91sam9g45: add AC97
* tag 'at91-ab-4.14-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
ARM: dts: at91: at91sam9g45: add AC97
ARM: dts: at91: sama5d2_xplained: add pin muxing and enable classd
ARM: dts: at91: sama5d2: add classd nodes
ARM: dts: at91: sama5d2_xplained: use pin macros instead of numbers
ARM: dts: at91: at91-sama5d27_som1_ek: Add sama5d27 SoM1 EK support
ARM: dts: at91: at91-sama5d27_som1: add sama5d27 SoM1 support
ARM: dts: at91: sama5d2: add isc node
ARM: dts: at91: sama5d2: add QSPI nodes
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Fri, 1 Sep 2017 23:44:19 +0000 (16:44 -0700)]
Merge tag 'mvebu-dt64-4.14-4' of git://git.infradead.org/linux-mvebu into next/dt64
mvebu dt64 for 4.14 (part 4)
Adding more resources on the network controller ppv2.2 on Armada 7K/8K
allowing to use last improvement introduced in the driver.
Also enabling more network ports on the mcbin (A8K base board)
* tag 'mvebu-dt64-4.14-4' of git://git.infradead.org/linux-mvebu:
arm64: dts: marvell: mcbin: enable more networking ports
arm64: dts: marvell: add a reference to the sysctrl syscon in the ppv2 node
arm64: dts: marvell: add TX interrupts for PPv2.2
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Fri, 1 Sep 2017 23:42:51 +0000 (16:42 -0700)]
Merge tag 'sunxi-fixes-for-4.13-3' of https://git./linux/kernel/git/sunxi/linux into next/dt64
Allwinner fixes for 4.13, take 3
This is a revert of the EMAC bindings. The discussion has not settled down
yet on a proper representation of the PHY, and therefore we cannot commit
to a binding yet
* tag 'sunxi-fixes-for-4.13-3' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm: dts: sunxi: Revert EMAC changes
arm64: dts: allwinner: Revert EMAC changes
dt-bindings: net: Revert sun8i dwmac binding
arm64: allwinner: h5: fix pinctrl IRQs
arm64: allwinner: a64: sopine: add missing ethernet0 alias
arm64: allwinner: a64: pine64: add missing ethernet0 alias
arm64: allwinner: a64: bananapi-m64: add missing ethernet0 alias
Signed-off-by: Olof Johansson <olof@lixom.net>
Conflicts:
arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
Olof Johansson [Fri, 1 Sep 2017 23:41:42 +0000 (16:41 -0700)]
Merge tag 'sunxi-fixes-for-4.13-3' of https://git./linux/kernel/git/sunxi/linux into next/dt
Allwinner fixes for 4.13, take 3
This is a revert of the EMAC bindings. The discussion has not settled down
yet on a proper representation of the PHY, and therefore we cannot commit
to a binding yet
* tag 'sunxi-fixes-for-4.13-3' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm: dts: sunxi: Revert EMAC changes
arm64: dts: allwinner: Revert EMAC changes
dt-bindings: net: Revert sun8i dwmac binding
arm64: allwinner: h5: fix pinctrl IRQs
arm64: allwinner: a64: sopine: add missing ethernet0 alias
arm64: allwinner: a64: pine64: add missing ethernet0 alias
arm64: allwinner: a64: bananapi-m64: add missing ethernet0 alias
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Wed, 30 Aug 2017 16:58:03 +0000 (09:58 -0700)]
Merge tag 'sunxi-dt-for-4.14-3' of https://git./linux/kernel/git/sunxi/linux into next/dt
Allwinner DT changes for 4.14, take 3
One new board, and a revert of a patch relying on a binding not stable
enough so that we can commit to it.
* tag 'sunxi-dt-for-4.14-3' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
Revert "ARM: dts: sun8i: h3: Enable dwmac-sun8i on the Beelink X2"
ARM: sun8i: a83t: Add device tree for Sinovoip Bananapi BPI-M3
Signed-off-by: Olof Johansson <olof@lixom.net>
Dmitry Rezvanov [Sun, 18 Jun 2017 12:40:49 +0000 (21:40 +0900)]
ARM: dts: at91: at91sam9g45: add AC97
AT91SAM9G45 has an AC97 controller, but it is not described in the dts
file.
This patch adds AC97 node in device tree.
Signed-off-by: Dmitry Rezvanov <dmitry.rezvanov@yandex.ru>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Antoine Tenart [Thu, 24 Aug 2017 08:46:39 +0000 (10:46 +0200)]
arm64: dts: marvell: mcbin: enable more networking ports
This patch enables the two GE/SFP ports. They are configured in 10GKR
mode by default. To do this the cpm_xdmio is enabled as well, and two
phy descriptions are added.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Tested-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Antoine Tenart [Thu, 24 Aug 2017 08:46:38 +0000 (10:46 +0200)]
arm64: dts: marvell: add a reference to the sysctrl syscon in the ppv2 node
The network driver on Marvell SoC (7k/8k) needs to access some registers
in the system controller to configure its ports at runtime. This patch
adds a phandle reference to the syscon system controller node in the
ppv2 node.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Tested-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Thomas Petazzoni [Wed, 30 Aug 2017 09:07:45 +0000 (11:07 +0200)]
arm64: dts: marvell: add TX interrupts for PPv2.2
This commit updates the Marvell Armada 7K/8K Device Tree to describe
the TX interrupts of the Ethernet controllers, in both the master and
slave CP110s.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Olof Johansson [Wed, 30 Aug 2017 05:42:22 +0000 (22:42 -0700)]
Merge tag 'uniphier-dt64-v4.14-2' of git://git./linux/kernel/git/masahiroy/linux-uniphier into next/dt64
UniPhier ARM64 SoC DT updates for v4.14 (2nd)
- add reset controller node of analog amplifier
- add AIDET irqchip device nodes
- fix size of sdctrl node
- support new SoC PXs3 and its reference development board
* tag 'uniphier-dt64-v4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
arm64: dts: uniphier: add PXs3 SoC support
arm64: dts: uniphier: fix size of sdctrl node
arm64: dts: uniphier: add AIDET nodes
arm64: dts: uniphier: add reset controller node of analog amplifier
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Wed, 30 Aug 2017 05:41:34 +0000 (22:41 -0700)]
Merge tag 'uniphier-dt-v4.14-2' of git://git./linux/kernel/git/masahiroy/linux-uniphier into next/dt
UniPhier ARM SoC DT updates for v4.14 (2nd)
- add AIDET irqchip device nodes
- fix size of sdctrl node
- add ethernet pinmux nodes
* tag 'uniphier-dt-v4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
ARM: dts: uniphier: add pinctrl groups of ethernet phy mode
ARM: dts: uniphier: fix size of sdctrl nodes
ARM: dts: uniphier: add AIDET nodes
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Wed, 30 Aug 2017 05:25:07 +0000 (22:25 -0700)]
Merge tag 'amlogic-dt64-2' of git://git./linux/kernel/git/khilman/linux-amlogic into next/dt64
Amlogic 64-bit DT updates for v4.14, round 2
- clock updates w/dependencies on clock tree
- GPIO names updates
* tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM64: dts: meson-gxl-libretech-cc: Add GPIO lines names
ARM64: dts: meson-gx: Add AO CEC nodes
ARM64: dts: meson-gx: update AO clkc to new bindings
dt-bindings: clock: gxbb-aoclk: Add CEC 32k clock
clk: meson: gxbb: Add sd_emmc clk0 clkids
clk: meson-gxbb: expose almost every clock in the bindings
clk: meson8b: expose every clock in the bindings
clk: meson: gxbb: fix protection against undefined clks
clk: meson: meson8b: fix protection against undefined clks
dt-bindings: clock: meson8b: describe the embedded reset controller
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Wed, 30 Aug 2017 05:23:22 +0000 (22:23 -0700)]
Merge tag 'mvebu-dt64-4.14-3' of git://git.infradead.org/linux-mvebu into next/dt64
mvebu dt64 for 4.14 (part 3)
Add description for a new family SoC from Marvell: Armada-8KP.
* tag 'mvebu-dt64-4.14-3' of git://git.infradead.org/linux-mvebu:
arm64: dts: marvell: add Device Tree files for Armada-8KP
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Wed, 30 Aug 2017 05:21:59 +0000 (22:21 -0700)]
Merge tag 'v4.13-next-dts32' of https://github.com/mbgg/linux-mediatek into next/dt
- mt7623: add mt7623n and mt7623a plattform
- add mt7623 based reference boards
- mt7623: add usb3, ethernet, cpufreq,
- Add banana-pi board
- add mt6323 pmic
- mt2701: add larb-id property to smi larb
* tag 'v4.13-next-dts32' of https://github.com/mbgg/linux-mediatek:
arm: dts: mt7623: cleanup binding file
arm: dts: mt7623: Add SD-card and EMMC to bananapi-r2
arm: dts: mediatek: add larbid property for larb
arm: dts: mt7623: fix mmc interrupt assignment
arm: dts: mt2701: Add usb3 device nodes
arm: dts: mt2701: Add ethernet device node
arm: dts: mt7623: add clock-frequency to CPU nodes
arm: dts: mt7623: add support for Bananapi R2 (BPI-R2) board
arm: dts: mt7623: enable the nand device on the mt7623n nand rfb
arm: dts: mt7623: enable the usb device on the mt7623n rfb
arm: dts: mt7623: cleanup the mt7623n rfb uart nodes
arm: dts: mt7623: rename mt7623-evb.dts to arch/arm/boot/dts/mt7623n-rfb.dtsi
arm: dts: mt7623: add mt6323.dtsi file
dt-bindings: arm: mediatek: add bindings for mediatek MT7623a SoC Platform
dt-bindings: arm: mediatek: update for MT7623n SoC and relevant boards
arm: dts: mt7623: fixup binding violation missing reset in ethernet node
dt-bindings: net: mediatek: update documentation for reset signals
Signed-off-by: Olof Johansson <olof@lixom.net>
Masahiro Yamada [Mon, 28 Aug 2017 12:33:07 +0000 (21:33 +0900)]
arm64: dts: uniphier: add PXs3 SoC support
Initial support for PXs3 SoC and its reference development board.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Kunihiko Hayashi [Mon, 28 Aug 2017 02:11:45 +0000 (11:11 +0900)]
ARM: dts: uniphier: add pinctrl groups of ethernet phy mode
Add pinctrl groups of ethenet phy mode, such as "ether_rgmii", "ether_rmii",
and "ether_mii".
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Sun, 27 Aug 2017 12:02:31 +0000 (21:02 +0900)]
ARM: dts: uniphier: fix size of sdctrl nodes
All registers are located within 0x400 size from the base address.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Sun, 27 Aug 2017 12:02:30 +0000 (21:02 +0900)]
ARM: dts: uniphier: add AIDET nodes
Add UniPhier AIDET (ARM Interrupt Detector) nodes to support
active low interrupts.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Sun, 27 Aug 2017 12:03:07 +0000 (21:03 +0900)]
arm64: dts: uniphier: fix size of sdctrl node
All registers are located within 0x400 size from the base address.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Sun, 27 Aug 2017 12:03:06 +0000 (21:03 +0900)]
arm64: dts: uniphier: add AIDET nodes
Add UniPhier AIDET (ARM Interrupt Detector) nodes to support
active low interrupts.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Maxime Ripard [Fri, 25 Aug 2017 18:36:48 +0000 (20:36 +0200)]
arm: dts: sunxi: Revert EMAC changes
Since the discussion is not settled yet for the EMAC, and that the release
in getting really close, let's revert the changes for now, and we'll
reintroduce them later.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Maxime Ripard [Fri, 25 Aug 2017 18:36:48 +0000 (20:36 +0200)]
arm64: dts: allwinner: Revert EMAC changes
Since the discussion is not settled yet for the EMAC, and that the release
in getting really close, let's revert the changes for now, and we'll
reintroduce them later.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Maxime Ripard [Fri, 25 Aug 2017 18:34:35 +0000 (20:34 +0200)]
dt-bindings: net: Revert sun8i dwmac binding
This binding still doesn't please everyone, and we're getting far too
close from the release to allow it to reach a stable version.
Let's remove it until the discussion settles down.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Maxime Ripard [Mon, 28 Aug 2017 08:49:50 +0000 (10:49 +0200)]
Revert "ARM: dts: sun8i: h3: Enable dwmac-sun8i on the Beelink X2"
This reverts commit
ddb56254ae52acff7bd7fbd8f963e79bffc324d4. The EMAC
bindings have not stabilized yet, so we can't commit to keeping them
stable.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Katsuhiro Suzuki [Mon, 21 Aug 2017 11:55:04 +0000 (20:55 +0900)]
arm64: dts: uniphier: add reset controller node of analog amplifier
This patch adds reset controller node of analog signal amplifier
core (ADAMV) for UniPhier LD11/LD20 SoCs.
Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Arnd Bergmann [Thu, 24 Aug 2017 13:55:58 +0000 (15:55 +0200)]
Merge tag 'v4.14-rockchip-dts64-2' of git://git./linux/kernel/git/mmind/linux-rockchip into next/dt64
Pull "second round of Rockchip dts64 changes for 4.14" from Heiko Stübner:
3 new boards, the rk3328-based Rock64 from the Pine64-makers, the
Sapphire som+baseboard which is another evaluation board for Rocckhip
customers and the rk3399-based som+baseboard from Austria-based
Theobroma Systems, which interestingly is in a miniITX formfactor
and provides a real PCIe x4 slot.
New nodes include on rk3399 graphics (vops, hdmi, etc) and more iommus,
on rk3328 iommus, pwm, thermal management, and sound as well as operating
points and rk3368 got iommu nodes and cpu operating points.
On existing boards firefly got operating points, the rk3328-evb got its
pmic and gru boards got some sound-related fixes.
* tag 'v4.14-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (29 commits)
arm64: dts: rockchip: add Haikou baseboard with RK3399-Q7 SoM
arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM
dt-bindings: add rk3399-q7 SoM
arm64: dts: rockchip: add rk3328-rock64 board
arm64: dts: rockchip: add rk3328 pdm node
arm64: dts: rockchip: add more rk3399 iommu nodes
arm64: dts: rockchip: add rk3368 iommu nodes
arm64: dts: rockchip: add rk3328 iommu nodes
arm64: dts: rockchip: Add basic cpu frequencies for RK3368
arm64: dts: rockchip: add rk805 node for rk3328-evb
arm64: dts: rockchip: Assign mic irq to correct device for Gru
arm64: dts: rockchip: init rk3399 vop clock rates
arm64: dts: rockchip: Add pwm nodes for rk3328
arm64: dts: rockchip: Fix wrong rt5514 dmic delay property for Gru
arm64: dts: rockchip: disable tx ipgap linecheck for rk3399 dwc3
arm64: dts: rockchip: remove num-slots property from rk3399-sapphire
arm64: dts: rockchip: Enable tsadc module on RK3328 eavluation board
arm64: dts: rockchip: add thermal nodes for rk3328 SoC
arm64: dts: rockchip: add tsadc node for rk3328 SoC
arm64: dts: rockchip: add rk3328 i2s nodes
...
Arnd Bergmann [Thu, 24 Aug 2017 13:49:06 +0000 (15:49 +0200)]
Merge tag 'v4.14-rockchip-dts32-2' of git://git./linux/kernel/git/mmind/linux-rockchip into next/dt
Pull "second round of Rockchip dts32 changes for 4.14" from Heiko Stübner:
A lot of attention for the rv1108 soc targetted at media-processing
(usb, operating points, spi, pwm, adc, watchdog, i2c and devices for
its evb).
RK3228/3229 gets iommu and spi nodes. Similar to the rk3288 which
also gets some more iommu nodes as well as getting converted to 64
bit addresses due to wanting to address more than 4GB of memory
via LPAE.
* tag 'v4.14-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: enable usb for rv1108-evb
ARM: dts: rockchip: add usb nodes for rv1108 SoCs
dt-bindings: update grf-binding for rv1108 SoCs
ARM: dts: rockchip: add cpu power supply for rv1108 evb
ARM: dts: rockchip: add cpu opp table for rv1108
ARM: dts: rockchip: add rk322x iommu nodes
ARM: dts: rockchip: add accelerometer bma250e dt node for rv1108 evb
ARM: dts: rockchip: add pmic rk805 dt node for rv1108 evb
ARM: dts: rockchip: add pwm backlight for rv1108 evb
ARM: dts: rockchip: add pwm dt nodes for rv1108
ARM: dts: rockchip: add spi dt node for rv1108
ARM: dts: rockchip: add saradc support for rv1108
ARM: dts: rockchip: add watchdog dt node for rv1108
ARM: dts: rockchip: add i2c dt nodes for rv1108
clk: rockchip: fix up indentation of some RV1108 clock-ids
clk: rockchip: rename the clk id for HCLK_I2S1_2CH
clk: rockchip: add more clk ids for rv1108
ARM: dts: rockchip: add more iommu nodes on rk3288
ARM: dts: rockchip: convert rk3288 device tree files to 64 bits
ARM: dts: rockchip: add spi node and spi pinctrl on rk3228/rk3229
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 24 Aug 2017 11:10:12 +0000 (13:10 +0200)]
Merge tag 'aspeed-4.14-devicetree' of git://git./linux/kernel/git/joel/aspeed into next/dt
Pull "Aspeed devicetree updates for 4.14" from Joel Stanley:
- fix to expose the full flash windows on ast2400.
* tag 'aspeed-4.14-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
ARM: dts: aspeed-g4: fix AHB window size of the SMC controllers
Hanna Hawa [Thu, 10 Aug 2017 11:28:54 +0000 (14:28 +0300)]
arm64: dts: marvell: add Device Tree files for Armada-8KP
This commit adds the base Device Tree files for the Armada 8KPlus.
The Armada 8KP SoCs include several hardware blocks, and this
commit only adds support for the AP810 block, that contains the CPU
core and basic peripherals.
AP810 is a high-performance die, includes octal core application
processor based ARMv8-A architecture, two standard high speed DDR4
interface, and GIC-600 interrupt controller.
AP810 Built as part of Marvell’s MoChi AP family products.
Armada-8080 (8KPlus family), include an AP810 block that contains
the CPU core and basic peripherals.
This commit creates the following hierarchy:
* armada-ap810-ap0.dtsi - definitions common to AP810
* armada-ap810-ap0-octa-core.dtsi - description of the octa cores
* armada-8080.dtsi - description of the 8080 SoC
* armada-8080-db.dts - description of the 8080 board
Signed-off-by: Hanna Hawa <hannah@marvell.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Arnd Bergmann [Wed, 23 Aug 2017 19:48:05 +0000 (21:48 +0200)]
Merge tag 'samsung-dt-4.14-2' of git://git./linux/kernel/git/krzk/linux into next/dt
Pull "Samsung DTS ARM changes for v4.14, part 2" from Krzysztof Kozłowski:
Fix PCI bus dtc warnings.
* tag 'samsung-dt-4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: fix PCI bus dtc warnings
Klaus Goger [Fri, 18 Aug 2017 19:34:45 +0000 (21:34 +0200)]
arm64: dts: rockchip: add Haikou baseboard with RK3399-Q7 SoM
Haikou is a Qseven and μQseven baseboard featuring PCIe, USB3 and a
video connector for MIPI-DSI/CSI and eDP adapter.
This dts is for usage with the RK3399-Q7 SoM Puma.
Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Klaus Goger [Fri, 18 Aug 2017 19:34:44 +0000 (21:34 +0200)]
arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM
The RK3399-Q7 SoM is a Qseven-compatible (70mm x 70mm, MXM-230
connector) system-on-module from Theobroma Systems, featuring the
Rockchip RK3399.
It provides the following feature set:
* up to 4GB DDR3
* on-module SPI-NOR flash
* on-module eMMC (with 8-bit 1.8V interface)
* SD card (on a baseboad) via edge connector
* Gigabit Ethernet with on-module Micrel KSZ9031 GbE PHY
* HDMI/eDP/2x MIPI-DSI
* 2x MIPI-CSI
* USB
- 1x USB 3.0 dual-role (direct connection)
- 2x USB 3.0 host + 1x USB 2.0 (on-module USB 3.0 hub)
* on-module STM32 Cortex-M0 companion controller, implementing:
- low-power RTC functionality (ISL1208 emulation)
- fan controller (AMC6821 emulation)
- USB<->CAN bridge controller
Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Klaus Goger [Fri, 18 Aug 2017 19:34:43 +0000 (21:34 +0200)]
dt-bindings: add rk3399-q7 SoM
RK3399-Q7 is a Qseven compatible system-on-module by Theobroma Systems.
This adds the module and the EVK baseboard "Haikou"
Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Frank Wang [Mon, 21 Aug 2017 08:39:28 +0000 (16:39 +0800)]
ARM: dts: rockchip: enable usb for rv1108-evb
Rockchip's rv1108-evb board has one usb otg controller and one usb
host controller, each usb controller connect with one usb-phy port
through UTMI+ interface. This patch enables them to support usb on
rv1108-evb board.
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Frank Wang [Mon, 21 Aug 2017 08:39:27 +0000 (16:39 +0800)]
ARM: dts: rockchip: add usb nodes for rv1108 SoCs
This patch adds usb otg/host controllers and phys nodes for RV1108 SoCs.
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Frank Wang [Mon, 21 Aug 2017 08:39:26 +0000 (16:39 +0800)]
dt-bindings: update grf-binding for rv1108 SoCs
This patch adds the compatible of GRF and USBGRF for RV1108 SoCs.
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Cédric Le Goater [Wed, 19 Apr 2017 13:43:15 +0000 (15:43 +0200)]
ARM: dts: aspeed-g4: fix AHB window size of the SMC controllers
The window of the Aspeed AST2400 SMC Controllers to map chips on the
AHB Bus has a 256MB size. The full window range is
[ 0x20000000 - 0x2FFFFFFF ] for the FMC controller
[ 0x30000000 - 0x3FFFFFFF ] for the SPI controller
This change requires CONFIG_VMSPLIT_2G to be set.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Andy Yan [Tue, 22 Aug 2017 13:13:30 +0000 (21:13 +0800)]
ARM: dts: rockchip: add cpu power supply for rv1108 evb
The cpu is powered by regulator vdd_core on RV1108 evalution
board. Add it to the cpu dt node.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Andy Yan [Tue, 22 Aug 2017 13:11:55 +0000 (21:11 +0800)]
ARM: dts: rockchip: add cpu opp table for rv1108
Add cpu opp table for rv1108 to support frequency
from 408MHZ to 1008MHZ.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Heiko Stuebner [Mon, 21 Aug 2017 15:50:20 +0000 (17:50 +0200)]
arm64: dts: rockchip: add rk3328-rock64 board
The ROCK64 is a credit card size 4K60P HDR Media Board Computer using the
Rockchip RK3328 Quad-Core ARM Cortex A53 64-Bit Processor and supporting
up to 4GB 1600MHz LPDDR3 memory. It provides eMMC module socket, MicroSD
Card slot, Pi-2 Bus, Pi-P5+ Bus, USB 3.0 and many others peripheral
devices interface for makers to integrate with sensors and devices.
The devicetree currently supports basic peripherals, with more to be
added later on.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Sugar Zhang [Mon, 21 Aug 2017 08:25:06 +0000 (16:25 +0800)]
arm64: dts: rockchip: add rk3328 pdm node
This patch add pdm controller device node for rk3328.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Neil Armstrong [Fri, 4 Aug 2017 13:38:04 +0000 (15:38 +0200)]
ARM64: dts: meson-gxl-libretech-cc: Add GPIO lines names
This patch describes the GPIO lines usage on the LibreTech CC board.
This is useful in the debugfs gpio file and using the cdev gpio API.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[khilman: minor whiespace fix]
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Kevin Hilman [Tue, 22 Aug 2017 22:37:31 +0000 (15:37 -0700)]
Merge tag 'v4.13-rc4' into v4.14/dt64
Linux 4.13-rc4
Neil Armstrong [Fri, 4 Aug 2017 13:12:13 +0000 (15:12 +0200)]
ARM64: dts: meson-gx: Add AO CEC nodes
This patch adds the AO CEC node in all the HDMI enabled boards DTS.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Neil Armstrong [Fri, 4 Aug 2017 13:12:12 +0000 (15:12 +0200)]
ARM64: dts: meson-gx: update AO clkc to new bindings
The AO clkc needs to be updated to new bindings with an system control parent
node and moving the clkc node as subnode.
Also adds the SoC specific compatible following the bindings requirements.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Kevin Hilman [Tue, 22 Aug 2017 22:29:59 +0000 (15:29 -0700)]
Merge tag 'meson-clk-headers-for-4.14' of git://github.com/BayLibre/clk-meson into v4.14/dt64
Amlogic clock headers updates for 4.14
* meson8b: add the reset controller to the clkc
* meson: expose all clk ids
* gxbb-aoclk: Add CEC 32k clock
* gxbb: add mmc input 0 clocks
* meson: fix protection against undefined clks
* tag 'meson-clk-headers-for-4.14' of git://github.com/BayLibre/clk-meson:
dt-bindings: clock: gxbb-aoclk: Add CEC 32k clock
clk: meson: gxbb: Add sd_emmc clk0 clkids
clk: meson-gxbb: expose almost every clock in the bindings
clk: meson8b: expose every clock in the bindings
clk: meson: gxbb: fix protection against undefined clks
clk: meson: meson8b: fix protection against undefined clks
dt-bindings: clock: meson8b: describe the embedded reset controller
Arnd Bergmann [Tue, 22 Aug 2017 15:46:18 +0000 (17:46 +0200)]
Merge tag 'davinci-for-v4.14/dt' of git://git./linux/kernel/git/nsekhar/linux-davinci into next/dt
Pull "Add device-tree node for display on Lego Mindstorms EV3" from Sekhar Nori:
* tag 'davinci-for-v4.14/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: dts: da850-lego-ev3: Add node for LCD display
Arnd Bergmann [Tue, 22 Aug 2017 15:40:37 +0000 (17:40 +0200)]
Merge tag 'zynqmp-dt-for-4.14' of https://github.com/Xilinx/linux-xlnx into next/dt64
Pull "arm64: Xilinx ZynqMP DT fixes for v4.14" from Michal Simek:
- Fix DTC warnings
- Add idle states, OP, cci-400, RTC, pcie prefetchable memory
fpd/lpd dmas, clocks for ep108
- Enable can1
- Fix smmu IRQ, aliases, uart compatible string
- Use generic compatible string for i2c eeprom
* tag 'zynqmp-dt-for-4.14' of https://github.com/Xilinx/linux-xlnx:
arm64: zynqmp: Add generic compatible string for I2C EEPROM
arm64: zynqmp: Add missing mmc aliases in ep108
arm64: zynqmp: Enable can1 for ep108
arm64: zynqmp: Added clocks to DT for ep108
arm64: zynqmp: Use C pre-processor for includes
arm64: zynqmp: Add fpd/lpd dmas
arm64: zynqmp: Set status disabled in dtsi
arm64: zynqmp: Add new uartps compatible string
arm64: zynqmp: Correct IRQ nr for the SMMU
arm64: zynqmp: Add support for RTC
arm64: zynqmp: Adding prefetchable memory space to pcie node
arm64: zynqmp: Add CCI-400 node
arm64: zynqmp: Add dcc console for zynqmp
arm64: zynqmp: Add operating points
arm64: zynqmp: Add idle state for ZynqMP
arm64: zynqmp: Add references to cpu nodes
arm64: zynqmp: Move nodes which have no reg property out of bus
arm64: zynqmp: Remove leading 0s from mtd table for spi flashes
arm64: dts: xilinx: fix PCI bus dtc warnings
Arnd Bergmann [Tue, 22 Aug 2017 13:31:38 +0000 (15:31 +0200)]
Merge tag 'zynq-dt-for-4.14' of https://github.com/Xilinx/linux-xlnx into next/dt
Pull "arm: Xilinx Zynq DT fixes for v4.14" from Michal Simek:
- Remove earlycon
- Use C pre-processor
- Add fpga full region
- Add ethernet-phy as device-type
- Add adv7511 nodes to zc70x
* tag 'zynq-dt-for-4.14' of https://github.com/Xilinx/linux-xlnx:
arm: zynq: Remove earlycon from bootargs
arm: zynq: Use C pre-processor for includes in dts
arm: zynq: Label whole PL part as fpga_full region
arm: zynq: Add device-type property for zynq ethernet phy nodes
arm: zynq: Add adv7511 on i2c bus for zc70x
Linus Walleij [Tue, 22 Aug 2017 07:28:20 +0000 (09:28 +0200)]
ARM: dts: augment Ux500 to use DT cpufreq
This adds the operating points to the Ux500 device tree and
deletes the old special-purpose cpufreq node, as we can now
use the generic DT cpufreq driver.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Simon Xue [Mon, 24 Jul 2017 02:32:08 +0000 (10:32 +0800)]
ARM: dts: rockchip: add rk322x iommu nodes
Add VPU/VDEC/VOP/IEP iommu nodes
Signed-off-by: Simon Xue <xxm@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Simon Xue [Mon, 24 Jul 2017 02:32:10 +0000 (10:32 +0800)]
arm64: dts: rockchip: add more rk3399 iommu nodes
Add VPU/VDEC/IEP/ISP0/ISP1 iommu nodes
Signed-off-by: Simon Xue <xxm@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Simon Xue [Mon, 24 Jul 2017 02:32:09 +0000 (10:32 +0800)]
arm64: dts: rockchip: add rk3368 iommu nodes
Add IEP/ISP/VOP/HEVC/VPU iommu nodes
Signed-off-by: Simon Xue <xxm@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Simon Xue [Mon, 24 Jul 2017 02:32:07 +0000 (10:32 +0800)]
arm64: dts: rockchip: add rk3328 iommu nodes
Add H265e/VEPU/VPU/VDEC/VOP iommu nodes
Signed-off-by: Simon Xue <xxm@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Javier Martinez Canillas [Thu, 15 Jun 2017 18:54:13 +0000 (20:54 +0200)]
arm64: zynqmp: Add generic compatible string for I2C EEPROM
The at24 driver allows to register I2C EEPROM chips using different vendor
and devices, but the I2C subsystem does not take the vendor into account
when matching using the I2C table since it only has device entries.
But when matching using an OF table, both the vendor and device has to be
taken into account so the driver defines only a set of compatible strings
using the "atmel" vendor as a generic fallback for compatible I2C devices.
So add this generic fallback to the device node compatible string to make
the device to match the driver using the OF device ID table.
Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Tue, 23 Feb 2016 08:30:15 +0000 (09:30 +0100)]
arm64: zynqmp: Add missing mmc aliases in ep108
Add missing mmc aliases.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Naga Sureshkumar Relli [Tue, 12 Apr 2016 06:16:11 +0000 (11:46 +0530)]
arm64: zynqmp: Enable can1 for ep108
This patch enables can1 for ep108.
Signed-off-by: Naga Sureshkumar Relli <nagasure@xilinx.com>
Reviewed-by: Kedareswara rao Appana <appanad@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
VNSL Durga [Mon, 11 Apr 2016 12:13:47 +0000 (17:43 +0530)]
arm64: zynqmp: Added clocks to DT for ep108
Added clks for ep108 platform.
Signed-off-by: VNSL Durga <vnsldurg@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Alistair Francis [Thu, 25 Feb 2016 17:30:03 +0000 (09:30 -0800)]
arm64: zynqmp: Use C pre-processor for includes
Change the dtsi include code to use the C pre-processor #include instead
of the device tree /include/. This enables option to use dt binding
headers.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Fri, 9 Oct 2015 12:46:08 +0000 (14:46 +0200)]
arm64: zynqmp: Add fpd/lpd dmas
Wire fpd and lpd dma channels to zynqmp.dtsi.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Naga Sureshkumar Relli [Thu, 9 Mar 2017 14:30:13 +0000 (20:00 +0530)]
arm64: zynqmp: Set status disabled in dtsi
Do not enable smmu via dtsi. Enable it in board file when needed.
Signed-off-by: Naga Sureshkumar Relli <nagasure@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Fri, 27 Nov 2015 12:22:58 +0000 (13:22 +0100)]
arm64: zynqmp: Add new uartps compatible string
Mainline kernel has r1p12 compatible string now. Use this new compatible
string and also append generic compatible string.
Keep in your mind that using this generic compatible string not all uart
features will be available.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Moritz Fischer <mdf@kernel.org>
Edgar E. Iglesias [Thu, 26 Nov 2015 13:12:19 +0000 (14:12 +0100)]
arm64: zynqmp: Correct IRQ nr for the SMMU
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Fri, 9 Oct 2015 12:44:50 +0000 (14:44 +0200)]
arm64: zynqmp: Add support for RTC
Add support for RTC.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Bharat Kumar Gogada [Tue, 2 Aug 2016 15:04:13 +0000 (20:34 +0530)]
arm64: zynqmp: Adding prefetchable memory space to pcie node
Adding prefetchable memory space to pcie device tree node.
Shifting configuration space to 64-bit address space.
Removing pcie device tree node from amba as it requires size-cells=<2>
in order to access 64-bit address space.
Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Thu, 26 Nov 2015 10:21:25 +0000 (11:21 +0100)]
arm64: zynqmp: Add CCI-400 node
Add CCI-400 node to DTSI.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Wed, 14 Sep 2016 11:33:13 +0000 (13:33 +0200)]
arm64: zynqmp: Add dcc console for zynqmp
Add debug console to dtsi to be able to enable it in
board dts file.
Keep in your mind that every core has separate dcc port in case you want
to run SMP kernel.
DCC is very helpful communication channel for debugging.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Shubhrajyoti Datta [Mon, 6 Feb 2017 06:21:00 +0000 (11:51 +0530)]
arm64: zynqmp: Add operating points
Adding operating-points-v2 for zynqmp.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Stefan Krsmanovic [Fri, 21 Oct 2016 10:44:56 +0000 (12:44 +0200)]
arm64: zynqmp: Add idle state for ZynqMP
Added the idle-states node to describe zynqmp idle states. Only
cpu-sleep-0 idle state is added in this patch. References to the
idle-states node are added in all CPU nodes. Time values: entry/exit
latencies and min-residency, needs to be tuned. arm,psci-suspend-param
is selected to comply with PSCIv1.0 and Extended StateID format.
Signed-off-by: Stefan Krsmanovic <stefan.krsmanovic@aggios.com>
Acked-by: Will Wong <willw@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Mon, 6 Feb 2017 09:09:53 +0000 (10:09 +0100)]
arm64: zynqmp: Add references to cpu nodes
Add missing references to all cpu nodes.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Moritz Fischer <mdf@kernel.org>
Michal Simek [Wed, 5 Jul 2017 12:51:42 +0000 (14:51 +0200)]
arm64: zynqmp: Move nodes which have no reg property out of bus
Nodes without reg properties shouldn't be placed in amba node.
Move them out.
Warnings:
arch/arm64/boot/dts/xilinx/zynqmp-ep108.dtb: Warning (simple_bus_reg):
Node /amba/misc_clk missing or empty reg/ranges property
arch/arm64/boot/dts/xilinx/zynqmp-ep108.dtb: Warning (simple_bus_reg):
Node /amba/i2c_clk missing or empty reg/ranges property
arch/arm64/boot/dts/xilinx/zynqmp-ep108.dtb: Warning (simple_bus_reg):
Node /amba/sata_clk missing or empty reg/ranges property
arch/arm64/boot/dts/xilinx/zynqmp-ep108.dtb: Warning (simple_bus_reg):
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Tue, 16 Feb 2016 08:49:27 +0000 (09:49 +0100)]
arm: zynq: Remove earlycon from bootargs
Earlyconsole is used for early kernel debugging that's why this option
shouldn't be enabled by default.
Earlyconsole is partially copying the part of the bootlog after
"bootconsole [uart0] disabled".
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Thu, 7 Apr 2016 09:28:12 +0000 (11:28 +0200)]
arm: zynq: Use C pre-processor for includes in dts
Change the dtsi include code to use the C pre-processor #include instead
of the device tree /include/. This brings all Zynq device trees inline
with each other.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Tue, 14 Feb 2017 16:40:21 +0000 (17:40 +0100)]
arm: zynq: Label whole PL part as fpga_full region
This will simplify dt overlay structure for the whole PL.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Sai Pavan Boddu [Mon, 6 Mar 2017 12:47:19 +0000 (18:17 +0530)]
arm: zynq: Add device-type property for zynq ethernet phy nodes
Mention device-type = "ethernet-phy", as qemu will need this in absence
of compatible.
Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Christian Kohn [Thu, 12 Nov 2015 23:53:35 +0000 (15:53 -0800)]
arm: zynq: Add adv7511 on i2c bus for zc70x
Describe adv7511 on i2c bus.
Signed-off-by: Christian Kohn <christian.kohn@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
David Lechner [Mon, 7 Aug 2017 17:39:40 +0000 (12:39 -0500)]
ARM: dts: da850-lego-ev3: Add node for LCD display
This adds a new node for the LEGO MINDSTORMS EV3 LCD display.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Romain Perier [Fri, 18 Aug 2017 12:17:01 +0000 (14:17 +0200)]
arm64: dts: rockchip: Add basic cpu frequencies for RK3368
This adds and enable the operating points that have been tested and are
currently supported by the SoC. This also adds clocks for ARMCLKL and
ARMCLKB.
Signed-off-by: Romain Perier <romain.perier@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Joseph Chen [Wed, 9 Aug 2017 02:03:44 +0000 (10:03 +0800)]
arm64: dts: rockchip: add rk805 node for rk3328-evb
RK805 consists of 4 DCDCs, 3 LDOs. It's different from RK808
and RK818 that there are 2 output only GPIOs, we should add
properties "gpio-controller" and "gpio-cells = <2>".
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Andy Yan [Mon, 14 Aug 2017 08:44:11 +0000 (16:44 +0800)]
ARM: dts: rockchip: add accelerometer bma250e dt node for rv1108 evb
Add dt node of bosch accelerometer bma250e on rv1108 evb.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Andy Yan [Mon, 14 Aug 2017 08:43:41 +0000 (16:43 +0800)]
ARM: dts: rockchip: add pmic rk805 dt node for rv1108 evb
RK805 is used as the voltage regulator on rv1108 evaluation
board. Add device tree node for it.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Arnd Bergmann [Mon, 21 Aug 2017 07:33:36 +0000 (09:33 +0200)]
Merge tag 'sunxi-dt64-for-4.14-2' of https://git./linux/kernel/git/sunxi/linux into next/dt64
Pull "Allwinner arm64 device tree changes for 4.14, round 2" from Chen-Yu Tsai:
The usual improvement patches:
- PMIC, USB and WiFi enabled for Bananapi M64
- New board added: NanoPi A64
- New board added: Olimex A64-OLinuXino
* tag 'sunxi-dt64-for-4.14-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: allwinner: a64: Add A64-OLinuXino initial support
arm64: allwinner: a64: Add initial NanoPi A64 support
arm64: allwinner: a64: add proper support for the Wi-Fi on BPi M64
arm64: allwinner: a64: enable AXP803 for Banana Pi M64
arm64: allwinner: a64: enable USB host controller for BPi M64
Arnd Bergmann [Mon, 21 Aug 2017 07:27:37 +0000 (09:27 +0200)]
Merge tag 'sunxi-dt-for-4.14-2' of https://git./linux/kernel/git/sunxi/linux into next/dt
Pull "Allwinner device tree changes for 4.14, round 2" from Chen-Yu Tsai:
The usual improvements:
- AXP813/AXP818 PMIC (mfd and codec) enabled for Allwinner A83T boards
- USB enabled for Allwinner A83T boards
* tag 'sunxi-dt-for-4.14-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: sun8i: a83t: h8homlet-v2: Enable USB ports
ARM: sun8i: a83t: cubietruck-plus: Enable onboard USB peripherals
ARM: sun8i: a83t: Add device node for USB OTG controller
ARM: sun8i: a83t: Add USB PHY and host device nodes
ARM: sun8i: a83t: h8homlet-v2: Enable AC100 combo chip in AXP818 PMIC
ARM: sun8i: a83t: h8homlet-v2: Enable PMIC part of AXP818 PMIC
ARM: sun8i: a83t: cubietruck-plus: Enable AC100 combo chip in AXP818 PMIC
ARM: sun8i: a83t: cubietruck-plus: Enable PMIC part of AXP818 PMIC
ARM: sun8i: a83t: Add device node and pinmux setting for RSB controller
Chen-Yu Tsai [Thu, 17 Aug 2017 03:40:48 +0000 (11:40 +0800)]
ARM: sun8i: a83t: Add device tree for Sinovoip Bananapi BPI-M3
The BPI-M3 is an Allwinner A83T based SBC in the Bananapi/Bpi family.
It is roughly the same form factor as the BPI-M1+, with roughly the
same peripherals and connectors:
- 2GB LPDDR3 DRAM
- 8GB eMMC
- Micro-SD card slot
- HDMI output
- Headset (stereo + mic) jack
- Onboard mic
- Gigabit Ethernet with RTL8211E transceiver
- Ampak AP6212 WiFi + BT
- USB OTG connector
- USB-to-SATA bridge connected through a USB 2.0 hub
- Consumer IR receiver
- MIPI DSI LCD panel connector
- Camera interface (parallel and MIPI CSI) connector
- 3 LEDs (Red, Green, Blue), of which 2 are controllable (GB)
- Raspberry Pi 2 compatible GPIO header
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Jeffy Chen [Wed, 16 Aug 2017 09:24:32 +0000 (17:24 +0800)]
arm64: dts: rockchip: Assign mic irq to correct device for Gru
Currently we are assigning mic irq to rt5514 i2c driver, which is wrong.
Assign it to rt5514 spi driver instead.
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Kever Yang [Wed, 16 Aug 2017 02:51:09 +0000 (10:51 +0800)]
arm64: dts: rockchip: init rk3399 vop clock rates
We need to init vop aclk and hclk incase the U-Boot does not do
the initialize.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Mark Yao <mark.yao@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
David Wu [Tue, 8 Aug 2017 15:43:15 +0000 (23:43 +0800)]
arm64: dts: rockchip: Add pwm nodes for rk3328
There are 4 pwm channels built in rk3328 soc, need to configure
the both APB clock and bus clock.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Jeffy Chen [Fri, 18 Aug 2017 14:48:08 +0000 (22:48 +0800)]
arm64: dts: rockchip: Fix wrong rt5514 dmic delay property for Gru
According to rt5514 dt-binding, it should be "realtek,dmic-init-delay-ms".
Fixes:
48f4d9796d99 (arm64: dts: rockchip: add Gru/Kevin DTS)
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Andy Yan [Mon, 14 Aug 2017 08:42:47 +0000 (16:42 +0800)]
ARM: dts: rockchip: add pwm backlight for rv1108 evb
RV1108 EVB uses pwm0 modulate the backlight, add dt
node to enable it.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Andy Yan [Mon, 14 Aug 2017 08:40:26 +0000 (16:40 +0800)]
ARM: dts: rockchip: add pwm dt nodes for rv1108
Add pwm device tree node for rv1108 soc
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Arnd Bergmann [Fri, 18 Aug 2017 21:19:35 +0000 (23:19 +0200)]
Merge tag 'mvebu-dt64-4.14-2' of git://git.infradead.org/linux-mvebu into next/dt64
Pull "mvebu dt64 for 4.14 (part 2)" from Gregory CLEMENT:
- Enable uSD on ESPRESSObin (Armada 37xx based board)
- Add NAND support on Armada 7K/8K SoCs
- Enable USB host on Armada-7040-DB and Armada-8040-DB boards
* tag 'mvebu-dt64-4.14-2' of git://git.infradead.org/linux-mvebu:
ARM64: dts: marvell: enable USB host on Armada-8040-DB
ARM64: dts: marvell: enable USB host on Armada-7040-DB
ARM64: dts: marvell: add NAND support on the CP110
ARM64: dts: marvell: armada-37xx: Enable uSD on ESPRESSObin
arm64: dts: marvell: Fully re-order nodes in Marvell CP110 dtsi files
Rob Herring [Wed, 26 Jul 2017 21:09:41 +0000 (16:09 -0500)]
arm64: dts: apm: fix PCI bus dtc warnings
dtc recently added PCI bus checks. Fix these warnings.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Duc Dang <dhdang@apm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Rob Herring [Wed, 26 Jul 2017 21:09:40 +0000 (16:09 -0500)]
ARM: dts: versatile: fix PCI bus dtc warnings
dtc recently added PCI bus checks. Fix these warnings.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Rob Herring [Wed, 26 Jul 2017 21:09:39 +0000 (16:09 -0500)]
ARM: dts: spear13xx: fix PCI bus dtc warnings
dtc recently added PCI bus checks. Fix these warnings.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Shiraz Hashim <shiraz.linux.kernel@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 18 Aug 2017 21:14:15 +0000 (23:14 +0200)]
Merge tag 'renesas-arm64-dt2-for-v4.14' of https://git./linux/kernel/git/horms/renesas into next/dt64
Pull "Second Round of Renesas ARM64 Based SoC DT Updates for v4.14" from Simon Horman:
* Add PFC device node to R-Car D3 (r8a77995)
This is a step towards enabling devices that use multiplexed pins
- including ethernet - on boards that use the r8a7796 SoC.
* Add USB nodes to R-Car M3-W (r8a7796)
This is a step towards enabling USB devices on boards that
use the r8a7796 SoC.
* Use newly added Gen-3 fallback compat string
This is consistent with ongoing efforts to use per-generation
fallback strings where appropriate across devices found
on R-Car SoCs. The aim of the effort being to strike a balance
between the limited information available about the compatibility
of devices found on different SoCs and the desire to ease enabling
devices on new SoCs.
This has no run-time effect due to the presence of a per-SoC
compat string.
* Cleanup whitespace and extra LVDS port label
Minor cleanups, no run-time effect.
* tag 'renesas-arm64-dt2-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: dts: r8a77995: add pfc device node
arm64: dts: r8a7796: Add HSUSB device node
arm64: dts: r8a7796: Add USB-DMAC device nodes
arm64: dts: r8a7796: Add USB3.0 host device node
arm64: dts: r8a7796: add USB2.0 Host (EHCI/OHCI) device nodes
arm64: dts: r8a7796: add usb2_phy device nodes
arm64: dts: r8a7795: correct whitespace of companion property
arm64: dts: r8a7795: Use R-Car SATA Gen3 fallback compat string
arm64: dts: salvator-common: Remove extra LVDS port label
Arnd Bergmann [Fri, 18 Aug 2017 21:12:30 +0000 (23:12 +0200)]
Merge tag 'renesas-dt-bindings2-for-v4.14' of https://git./linux/kernel/git/horms/renesas into next/dt
Pull "Second Round of Renesas ARM Based SoC DT Bindings Updates for v4.14" from Simon Horman:
* Add RZ/G1M (r8a7743) binding to apmu driver
This allows SMP to be supported on the RZ/G1M SoC
* Add bindings for iW-RainboW-G22D-SODIMM RZ/G1E SODIMM development kit
This is in preparation for adding DTS to support this hardware
* tag 'renesas-dt-bindings2-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
dt-bindings: apmu: Document r8a7743 support
ARM: shmobile: document iW-RainboW-G22D SODIMM SOM Development Platform
ARM: shmobile: document iW-RainboW-G22M-SM SODIMM System on Module
Arnd Bergmann [Fri, 18 Aug 2017 21:10:31 +0000 (23:10 +0200)]
Merge tag 'renesas-dt2-for-v4.14' of https://git./linux/kernel/git/horms/renesas into next/dt
Pull "Second Round of Renesas ARM Based SoC DT Updates for v4.14" from Simon Horman:
* Use newly added Gen-3 fallback compat string
This is consistent with ongoing efforts to use per-generation
fallback strings where appropriate across devices found
on R-Car SoCs. The aim of the effort being to strike a balance
between the limited information available about the compatibility
of devices found on different SoCs and the desire to ease enabling
devices on new SoCs.
This has no run-time effect due to the presence of a per-SoC
compat string.
* Enable second CPU core on RZ/G1M (r8a7743)
The RZ/G1M has two CA15 cores running at up to 1.5GHz
* Enable frequency scaling on RZ/G1M (r8a7743)
* Add six I2C cores to RZ/G1M (r8a7743) SoC DT
This is a step towards enabling these cores on boards that use this SoC
* Add CEC clock for HDMI transmitter to R-Car M2-W (r8a7791) Koelsch
Hans Verkuil says "The adv7511 on the Koelsch board has a 12 MHz fixed
clock for the CEC block. Specify this in the dts to enable CEC support."
* Add PFC support to RZ/G1E (r8a7745) SoC and add Ethernet and SCIF2
pins to SK-RZG1E board.
This allows the kernel to control multiplexed pins for Ethernet
and SCIF2 rather than relying on setup inherited at boot.
* tag 'renesas-dt2-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: dts: r8a7791: Use R-Car SATA Gen2 fallback compat string
ARM: dts: r8a7790: Use R-Car SATA Gen2 fallback compat string
ARM: dts: r8a7743: Add OPP table for frequency scaling
ARM: dts: r8a7743: Add APMU node and second CPU core
ARM: dts: koelsch: Add CEC clock for HDMI transmitter
ARM: dts: sk-rzg1e: add Ether pins
ARM: dts: sk-rzg1e: add SCIF2 pins
ARM: dts: r8a7745: add PFC support
ARM: dts: r8a7743: Add I2C DT support
Arnd Bergmann [Fri, 18 Aug 2017 21:04:36 +0000 (23:04 +0200)]
Merge tag 'qcom-arm64-for-4.14-2' of git://git./linux/kernel/git/agross/linux into next/dt64
Pull "Qualcomm ARM64 Updates for v4.14 Part 2" from Andy Gross:
* Add IPQ8074 SoC and HK01 board support
* tag 'qcom-arm64-for-4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
arm64: dts: Add ipq8074 SoC and HK01 board support
Arnd Bergmann [Fri, 18 Aug 2017 21:02:58 +0000 (23:02 +0200)]
Merge tag 'tegra-for-4.14-arm-dt' of git://git./linux/kernel/git/tegra/linux into next/dt
Pull "ARM: tegra: Device tree changes for v4.14-rc1" from Thierry Reding:
One fix for Tegra124 to hook the host1x device up with the SMMU.
The remainder of this enables USB device mode on a couple of boards
where the port is currently unused.
* tag 'tegra-for-4.14-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Enable UDC on AC100
ARM: tegra: Enable UDC on Jetson TK1
ARM: tegra: Enable UDC on Dalmore
ARM: tegra: Enable UDC on Beaver
ARM: tegra: Register host1x node with IOMMU binding on Tegra124
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / log