Daisuke Nishimura [Thu, 8 Jan 2009 02:08:12 +0000 (18:08 -0800)]
memcg: memory swap controller: fix limit check
There are scatterd calls of res_counter_check_under_limit(), and most of
them don't take mem+swap accounting into account.
define mem_cgroup_check_under_limit() and avoid direct use of
res_counter_check_limit().
Reported-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nikanth Karthikesan [Thu, 8 Jan 2009 02:08:11 +0000 (18:08 -0800)]
memcg: check group leader fix
Remove unnecessary codes (...fragments of not-implemented
functionalilty...)
Reported-by: Nikanth Karthikesan <knikanth@suse.de>
Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
KAMEZAWA Hiroyuki [Thu, 8 Jan 2009 02:08:10 +0000 (18:08 -0800)]
memcg: revert gfp mask fix
My patch, memcg-fix-gfp_mask-of-callers-of-charge.patch changed gfp_mask
of callers of charge to be GFP_HIGHUSER_MOVABLE for showing what will
happen at memory reclaim.
But in recent discussion, it's NACKed because it sounds ugly.
This patch is for reverting it and add some clean up to gfp_mask of
callers of charge. No behavior change but need review before generating
HUNK in deep queue.
This patch also adds explanation to meaning of gfp_mask passed to charge
functions in memcontrol.h.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
KAMEZAWA Hiroyuki [Thu, 8 Jan 2009 02:08:09 +0000 (18:08 -0800)]
memcg: fix reclaim result checks
check_under_limit logic was wrong and this check should be against
mem_over_limit rather than mem.
Reported-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Jan Blunck <jblunck@suse.de>
Cc: Hirokazu Takahashi <taka@valinux.co.jp>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
KAMEZAWA Hiroyuki [Thu, 8 Jan 2009 02:08:08 +0000 (18:08 -0800)]
memcg: avoid unnecessary system-wide-oom-killer
Current mmtom has new oom function as pagefault_out_of_memory(). It's
added for select bad process rathar than killing current.
When memcg hit limit and calls OOM at page_fault, this handler called and
system-wide-oom handling happens. (means kernel panics if panic_on_oom is
true....)
To avoid overkill, check memcg's recent behavior before starting
system-wide-oom.
And this patch also fixes to guarantee "don't accnout against process with
TIF_MEMDIE". This is necessary for smooth OOM.
[akpm@linux-foundation.org: build fix]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Jan Blunck <jblunck@suse.de>
Cc: Hirokazu Takahashi <taka@valinux.co.jp>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Lai Jiangshan [Thu, 8 Jan 2009 02:08:07 +0000 (18:08 -0800)]
memcontrol: rcu_read_lock() to protect mm_match_cgroup()
mm_match_cgroup() calls cgroup_subsys_state().
We must use rcu_read_lock() to protect cgroup_subsys_state().
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Balbir Singh [Thu, 8 Jan 2009 02:08:07 +0000 (18:08 -0800)]
memcg: memory cgroup hierarchy feature selector
Don't enable multiple hierarchy support by default. This patch introduces
a features element that can be set to enable the nested depth hierarchy
feature. This feature can only be enabled when the cgroup for which the
feature this is enabled, has no children.
Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Cc: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Pavel Emelianov <xemul@openvz.org>
Cc: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Balbir Singh [Thu, 8 Jan 2009 02:08:06 +0000 (18:08 -0800)]
memcg: memory cgroup hierarchical reclaim
This patch introduces hierarchical reclaim. When an ancestor goes over
its limit, the charging routine points to the parent that is above its
limit. The reclaim process then starts from the last scanned child of the
ancestor and reclaims until the ancestor goes below its limit.
[akpm@linux-foundation.org: coding-style fixes]
[d-nishimura@mtf.biglobe.ne.jp: mem_cgroup_from_res_counter should handle both mem->res and mem->memsw]
Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Cc: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Pavel Emelianov <xemul@openvz.org>
Cc: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Balbir Singh [Thu, 8 Jan 2009 02:08:05 +0000 (18:08 -0800)]
memcg: memory cgroup resource counters for hierarchy
Add support for building hierarchies in resource counters. Cgroups allows
us to build a deep hierarchy, but we currently don't link the resource
counters belonging to the memory controller control groups, in the same
fashion as the corresponding cgroup entries in the cgroup hierarchy. This
patch provides the infrastructure for resource counters that have the same
hiearchy as their cgroup counter parts.
These set of patches are based on the resource counter hiearchy patches
posted by Pavel Emelianov.
NOTE: Building hiearchies is expensive, deeper hierarchies imply charging
the all the way up to the root. It is known that hiearchies are
expensive, so the user needs to be careful and aware of the trade-offs
before creating very deep ones.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Cc: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Pavel Emelianov <xemul@openvz.org>
Cc: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Balbir Singh [Thu, 8 Jan 2009 02:08:03 +0000 (18:08 -0800)]
memcg: memory cgroup hierarchy documentation
Documentation updates for hierarchy support
Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Cc: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Pavel Emelianov <xemul@openvz.org>
Cc: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hirokazu Takahashi [Thu, 8 Jan 2009 02:08:02 +0000 (18:08 -0800)]
memcg: add mem_cgroup_disabled()
We check mem_cgroup is disabled or not by checking
mem_cgroup_subsys.disabled. I think it has more references than expected,
now.
replacing
if (mem_cgroup_subsys.disabled)
with
if (mem_cgroup_disabled())
give us good look, I think.
[kamezawa.hiroyu@jp.fujitsu.com: fix typo]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
KAMEZAWA Hiroyuki [Thu, 8 Jan 2009 02:08:01 +0000 (18:08 -0800)]
memcg: synchronized LRU
A big patch for changing memcg's LRU semantics.
Now,
- page_cgroup is linked to mem_cgroup's its own LRU (per zone).
- LRU of page_cgroup is not synchronous with global LRU.
- page and page_cgroup is one-to-one and statically allocated.
- To find page_cgroup is on what LRU, you have to check pc->mem_cgroup as
- lru = page_cgroup_zoneinfo(pc, nid_of_pc, zid_of_pc);
- SwapCache is handled.
And, when we handle LRU list of page_cgroup, we do following.
pc = lookup_page_cgroup(page);
lock_page_cgroup(pc); .....................(1)
mz = page_cgroup_zoneinfo(pc);
spin_lock(&mz->lru_lock);
.....add to LRU
spin_unlock(&mz->lru_lock);
unlock_page_cgroup(pc);
But (1) is spin_lock and we have to be afraid of dead-lock with zone->lru_lock.
So, trylock() is used at (1), now. Without (1), we can't trust "mz" is correct.
This is a trial to remove this dirty nesting of locks.
This patch changes mz->lru_lock to be zone->lru_lock.
Then, above sequence will be written as
spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU
mem_cgroup_add/remove/etc_lru() {
pc = lookup_page_cgroup(page);
mz = page_cgroup_zoneinfo(pc);
if (PageCgroupUsed(pc)) {
....add to LRU
}
spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU
This is much simpler.
(*) We're safe even if we don't take lock_page_cgroup(pc). Because..
1. When pc->mem_cgroup can be modified.
- at charge.
- at account_move().
2. at charge
the PCG_USED bit is not set before pc->mem_cgroup is fixed.
3. at account_move()
the page is isolated and not on LRU.
Pros.
- easy for maintenance.
- memcg can make use of laziness of pagevec.
- we don't have to duplicated LRU/Active/Unevictable bit in page_cgroup.
- LRU status of memcg will be synchronized with global LRU's one.
- # of locks are reduced.
- account_move() is simplified very much.
Cons.
- may increase cost of LRU rotation.
(no impact if memcg is not configured.)
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
KAMEZAWA Hiroyuki [Thu, 8 Jan 2009 02:08:00 +0000 (18:08 -0800)]
memcg: mem+swap controller core
This patch implements per cgroup limit for usage of memory+swap. However
there are SwapCache, double counting of swap-cache and swap-entry is
avoided.
Mem+Swap controller works as following.
- memory usage is limited by memory.limit_in_bytes.
- memory + swap usage is limited by memory.memsw_limit_in_bytes.
This has following benefits.
- A user can limit total resource usage of mem+swap.
Without this, because memory resource controller doesn't take care of
usage of swap, a process can exhaust all the swap (by memory leak.)
We can avoid this case.
And Swap is shared resource but it cannot be reclaimed (goes back to memory)
until it's used. This characteristic can be trouble when the memory
is divided into some parts by cpuset or memcg.
Assume group A and group B.
After some application executes, the system can be..
Group A -- very large free memory space but occupy 99% of swap.
Group B -- under memory shortage but cannot use swap...it's nearly full.
Ability to set appropriate swap limit for each group is required.
Maybe someone wonder "why not swap but mem+swap ?"
- The global LRU(kswapd) can swap out arbitrary pages. Swap-out means
to move account from memory to swap...there is no change in usage of
mem+swap.
In other words, when we want to limit the usage of swap without affecting
global LRU, mem+swap limit is better than just limiting swap.
Accounting target information is stored in swap_cgroup which is
per swap entry record.
Charge is done as following.
map
- charge page and memsw.
unmap
- uncharge page/memsw if not SwapCache.
swap-out (__delete_from_swap_cache)
- uncharge page
- record mem_cgroup information to swap_cgroup.
swap-in (do_swap_page)
- charged as page and memsw.
record in swap_cgroup is cleared.
memsw accounting is decremented.
swap-free (swap_free())
- if swap entry is freed, memsw is uncharged by PAGE_SIZE.
There are people work under never-swap environments and consider swap as
something bad. For such people, this mem+swap controller extension is just an
overhead. This overhead is avoided by config or boot option.
(see Kconfig. detail is not in this patch.)
TODO:
- maybe more optimization can be don in swap-in path. (but not very safe.)
But we just do simple accounting at this stage.
[nishimura@mxp.nes.nec.co.jp: make resize limit hold mutex]
[hugh@veritas.com: memswap controller core swapcache fixes]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
KAMEZAWA Hiroyuki [Thu, 8 Jan 2009 02:07:58 +0000 (18:07 -0800)]
memcg: swap cgroup for remembering usage
For accounting swap, we need a record per swap entry, at least.
This patch adds following function.
- swap_cgroup_swapon() .... called from swapon
- swap_cgroup_swapoff() ... called at the end of swapoff.
- swap_cgroup_record() .... record information of swap entry.
- swap_cgroup_lookup() .... lookup information of swap entry.
This patch just implements "how to record information". No actual method
for limit the usage of swap. These routine uses flat table to record and
lookup. "wise" lookup system like radix-tree requires requires memory
allocation at new records but swap-out is usually called under memory
shortage (or memcg hits limit.) So, I used static allocation. (maybe
dynamic allocation is not very hard but it adds additional memory
allocation in memory shortage path.)
Note1: In this, we use pointer to record information and this means
8bytes per swap entry. I think we can reduce this when we
create "id of cgroup" in the range of 0-65535 or 0-255.
Reported-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Reported-by: Hugh Dickins <hugh@veritas.com>
Reported-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Pavel Emelianov <xemul@openvz.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
KAMEZAWA Hiroyuki [Thu, 8 Jan 2009 02:07:57 +0000 (18:07 -0800)]
memcg: mem+swap controller Kconfig
Config and control variable for mem+swap controller.
This patch adds CONFIG_CGROUP_MEM_RES_CTLR_SWAP
(memory resource controller swap extension.)
For accounting swap, it's obvious that we have to use additional memory to
remember "who uses swap". This adds more overhead. So, it's better to
offer "choice" to users. This patch adds 2 choices.
This patch adds 2 parameters to enable swap extension or not.
- CONFIG
- boot option
Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
KAMEZAWA Hiroyuki [Thu, 8 Jan 2009 02:07:56 +0000 (18:07 -0800)]
memcg: handle swap caches
SwapCache support for memory resource controller (memcg)
Before mem+swap controller, memcg itself should handle SwapCache in proper
way. This is cut-out from it.
In current memcg, SwapCache is just leaked and the user can create tons of
SwapCache. This is a leak of account and should be handled.
SwapCache accounting is done as following.
charge (anon)
- charged when it's mapped.
(because of readahead, charge at add_to_swap_cache() is not sane)
uncharge (anon)
- uncharged when it's dropped from swapcache and fully unmapped.
means it's not uncharged at unmap.
Note: delete from swap cache at swap-in is done after rmap information
is established.
charge (shmem)
- charged at swap-in. this prevents charge at add_to_page_cache().
uncharge (shmem)
- uncharged when it's dropped from swapcache and not on shmem's
radix-tree.
at migration, check against 'old page' is modified to handle shmem.
Comparing to the old version discussed (and caused troubles), we have
advantages of
- PCG_USED bit.
- simple migrating handling.
So, situation is much easier than several months ago, maybe.
[hugh@veritas.com: memcg: handle swap caches build fix]
Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
KAMEZAWA Hiroyuki [Thu, 8 Jan 2009 02:07:55 +0000 (18:07 -0800)]
memcg: new force_empty to free pages under group
By memcg-move-all-accounts-to-parent-at-rmdir.patch, there is no leak of
memory usage and force_empty is removed.
This patch adds "force_empty" again, in reasonable manner.
memory.force_empty file works when
#echo 0 (or some) > memory.force_empty
and have following function.
1. only works when there are no task in this cgroup.
2. free all page under this cgroup as much as possible.
3. page which cannot be freed will be moved up to parent.
4. Then, memcg will be empty after above echo returns.
This is much better behavior than old "force_empty" which just forget
all accounts. This patch also check signal_pending() and above "echo"
can be stopped by "Ctrl-C".
[akpm@linux-foundation.org: cleanup]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Blunck [Thu, 8 Jan 2009 02:07:53 +0000 (18:07 -0800)]
memcg: reduce size of mem_cgroup by using nr_cpu_ids
As Jan Blunck <jblunck@suse.de> pointed out, allocating per-cpu stat for
memcg to the size of NR_CPUS is not good.
This patch changes mem_cgroup's cpustat allocation not based on NR_CPUS
but based on nr_cpu_ids.
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
KAMEZAWA Hiroyuki [Thu, 8 Jan 2009 02:07:53 +0000 (18:07 -0800)]
memcg: move all acccounting to parent at rmdir()
This patch provides a function to move account information of a page
between mem_cgroups and rewrite force_empty to make use of this.
This moving of page_cgroup is done under
- lru_lock of source/destination mem_cgroup is held.
- lock_page_cgroup() is held.
Then, a routine which touches pc->mem_cgroup without lock_page_cgroup()
should confirm pc->mem_cgroup is still valid or not. Typical code can be
following.
(while page is not under lock_page())
mem = pc->mem_cgroup;
mz = page_cgroup_zoneinfo(pc)
spin_lock_irqsave(&mz->lru_lock);
if (pc->mem_cgroup == mem)
...../* some list handling */
spin_unlock_irqrestore(&mz->lru_lock);
Of course, better way is
lock_page_cgroup(pc);
....
unlock_page_cgroup(pc);
But you should confirm the nest of lock and avoid deadlock.
If you treats page_cgroup from mem_cgroup's LRU under mz->lru_lock,
you don't have to worry about what pc->mem_cgroup points to.
moved pages are added to head of lru, not to tail.
Expected users of this routine is:
- force_empty (rmdir)
- moving tasks between cgroup (for moving account information.)
- hierarchy (maybe useful.)
force_empty(rmdir) uses this move_account and move pages to its parent.
This "move" will not cause OOM (I added "oom" parameter to try_charge().)
If the parent is busy (not enough memory), force_empty calls try_to_free_page()
and reduce usage.
Purpose of this behavior is
- Fix "forget all" behavior of force_empty and avoid leak of accounting.
- By "moving first, free if necessary", keep pages on memory as much as
possible.
Adding a switch to change behavior of force_empty to
- free first, move if necessary
- free all, if there is mlocked/busy pages, return -EBUSY.
is under consideration. (I'll add if someone requtests.)
This patch also removes memory.force_empty file, a brutal debug-only interface.
Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fernando Luis Vazquez Cao [Thu, 8 Jan 2009 02:07:51 +0000 (18:07 -0800)]
memcg: do not recalculate section unnecessarily in init_section_page_cgroup
In init_section_page_cgroup() the section a given pfn belongs to is
calculated at the top of the function and, despite the fact that the
pfn/section correspondence does not change, it is recalculated further
down the same function. By computing this just once and reusing that
value we save some bytes in the object file and do not waste CPU cycles.
Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
KAMEZAWA Hiroyuki [Thu, 8 Jan 2009 02:07:50 +0000 (18:07 -0800)]
memcg: simple migration handling
Now, management of "charge" under page migration is done under following
manner. (Assume migrate page contents from oldpage to newpage)
before
- "newpage" is charged before migration.
at success.
- "oldpage" is uncharged at somewhere(unmap, radix-tree-replace)
at failure
- "newpage" is uncharged.
- "oldpage" is charged if necessary (*1)
But (*1) is not reliable....because of GFP_ATOMIC.
This patch tries to change behavior as following by charge/commit/cancel ops.
before
- charge PAGE_SIZE (no target page)
success
- commit charge against "newpage".
failure
- commit charge against "oldpage".
(PCG_USED bit works effectively to avoid double-counting)
- if "oldpage" is obsolete, cancel charge of PAGE_SIZE.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
KAMEZAWA Hiroyuki [Thu, 8 Jan 2009 02:07:49 +0000 (18:07 -0800)]
memcg: fix gfp_mask of callers of charge
Fix misuse of gfp_kernel.
Now, most of callers of mem_cgroup_charge_xxx functions uses GFP_KERNEL.
I think that this is from the fact that page_cgroup *was* dynamically
allocated.
But now, we allocate all page_cgroup at boot. And
mem_cgroup_try_to_free_pages() reclaim memory from GFP_HIGHUSER_MOVABLE +
specified GFP_RECLAIM_MASK.
* This is because we just want to reduce memory usage.
"Where we should reclaim from ?" is not a problem in memcg.
This patch modifies gfp masks to be GFP_HIGUSER_MOVABLE if possible.
Note: This patch is not for fixing behavior but for showing sane information
in source code.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
KAMEZAWA Hiroyuki [Thu, 8 Jan 2009 02:07:48 +0000 (18:07 -0800)]
memcg: introduce charge-commit-cancel style of functions
There is a small race in do_swap_page(). When the page swapped-in is
charged, the mapcount can be greater than 0. But, at the same time some
process (shares it ) call unmap and make mapcount 1->0 and the page is
uncharged.
CPUA CPUB
mapcount == 1.
(1) charge if mapcount==0 zap_pte_range()
(2) mapcount 1 => 0.
(3) uncharge(). (success)
(4) set page's rmap()
mapcount 0=>1
Then, this swap page's account is leaked.
For fixing this, I added a new interface.
- charge
account to res_counter by PAGE_SIZE and try to free pages if necessary.
- commit
register page_cgroup and add to LRU if necessary.
- cancel
uncharge PAGE_SIZE because of do_swap_page failure.
CPUA
(1) charge (always)
(2) set page's rmap (mapcount > 0)
(3) commit charge was necessary or not after set_pte().
This protocol uses PCG_USED bit on page_cgroup for avoiding over accounting.
Usual mem_cgroup_charge_common() does charge -> commit at a time.
And this patch also adds following function to clarify all charges.
- mem_cgroup_newpage_charge() ....replacement for mem_cgroup_charge()
called against newly allocated anon pages.
- mem_cgroup_charge_migrate_fixup()
called only from remove_migration_ptes().
we'll have to rewrite this later.(this patch just keeps old behavior)
This function will be removed by additional patch to make migration
clearer.
Good for clarifying "what we do"
Then, we have 4 following charge points.
- newpage
- swap-in
- add-to-cache.
- migration.
[akpm@linux-foundation.org: add missing inline directives to stubs]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Serge E. Hallyn [Thu, 8 Jan 2009 02:07:46 +0000 (18:07 -0800)]
devices cgroup: allow mkfifo
The devcgroup_inode_permission() hook in the devices whitelist cgroup has
always bypassed access checks on fifos. But the mknod hook did not. The
devices whitelist is only about block and char devices, and fifos can't
even be added to the whitelist, so fifos can't be created at all except by
tasks which have 'a' in their whitelist (meaning they have access to all
devices).
Fix the behavior by bypassing access checks to mkfifo.
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Paul Menage <menage@google.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: James Morris <jmorris@namei.org>
Reported-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Cc: <stable@kernel.org> [2.6.27.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Lai Jiangshan [Thu, 8 Jan 2009 02:07:45 +0000 (18:07 -0800)]
devcgroup: use list_for_each_entry_rcu()
We should use list_for_each_entry_rcu in RCU read site.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Paul Menage [Thu, 8 Jan 2009 02:07:44 +0000 (18:07 -0800)]
cgroups: make cgroup_path() RCU-safe
Fix races between /proc/sched_debug by freeing cgroup objects via an RCU
callback. Thus any cgroup reference obtained from an RCU-safe source will
remain valid during the RCU section. Since dentries are also RCU-safe,
this allows us to traverse up the tree safely.
Additionally, make cgroup_path() check for a NULL cgrp->dentry to avoid
trying to report a path for a partially-created cgroup.
[lizf@cn.fujitsu.com: call deactive_super() in cgroup_diput()]
Signed-off-by: Paul Menage <menage@google.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Tested-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Gowrishankar M [Thu, 8 Jan 2009 02:07:43 +0000 (18:07 -0800)]
cgroups: skip processes from other namespaces when listing a cgroup
Once tasks are populated from system namespace inside cgroup, container
replaces other namespace task with 0 while listing tasks, inside
container.
Though this is expected behaviour from container end, there is no use of
showing unwanted 0s.
In this patch, we check if a process is in same namespace before loading
into pid array.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Gowrishankar M <gowrishankar.m@in.ibm.com>
Acked-by: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Li Zefan [Thu, 8 Jan 2009 02:07:42 +0000 (18:07 -0800)]
cgroups: introduce link_css_set() to remove duplicate code
Add a common function link_css_set() to link a css_set to a cgroup.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Li Zefan [Thu, 8 Jan 2009 02:07:42 +0000 (18:07 -0800)]
cgroups: add inactive subsystems to rootnode.subsys_list
Though for an inactive hierarchy, we have subsys->root == &rootnode, but
rootnode's subsys_list is always empty.
This conflicts with the code in find_css_set():
for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
...
if (ss->root->subsys_list.next == &ss->sibling) {
...
}
}
if (list_empty(&rootnode.subsys_list)) {
...
}
The above code assumes rootnode.subsys_list links all inactive
hierarchies.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Li Zefan [Thu, 8 Jan 2009 02:07:41 +0000 (18:07 -0800)]
cgroups: make root_list contains active hierarchies only
Don't link rootnode to the root list, so root_list contains active
hierarchies only as the comment indicates. And rename for_each_root() to
for_each_active_root().
Also remove redundant check in cgroup_kill_sb().
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Lai Jiangshan [Thu, 8 Jan 2009 02:07:40 +0000 (18:07 -0800)]
cgroups: remove rcu_read_lock() in cgroupstats_build()
cgroup_iter_* do not need rcu_read_lock().
In cgroup_enable_task_cg_lists(), do_each_thread() and while_each_thread()
are protected by RCU, it's OK, for write_lock(&css_set_lock) implies
rcu_read_lock() in non-RT kernel.
If we need explicit rcu_read_lock(), we should add rcu_read_lock() in
cgroup_enable_task_cg_lists(), not cgroup_iter_*.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Paul Menage <menage@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Lai Jiangshan [Thu, 8 Jan 2009 02:07:39 +0000 (18:07 -0800)]
cgroups: call find_css_set() safely in cgroup_attach_task()
In cgroup_attach_task(), tsk maybe exit when we call find_css_set(). and
find_css_set() will access to invalid css_set.
This patch increases the count before get_css_set(), and decreases it
after find_css_set().
NOTE:
css_set's refcount is also taskcount, after this patch applied, taskcount
may be off-by-one WHEN cgroup_lock() is not held. but I reviewed other
code which use taskcount, they are still correct. No regression found by
reviewing and simply testing.
So I do not use two counters in css_set. (one counter for taskcount, the
other for refcount. like struct mm_struct) If this fix cause regression,
we will use two counters in css_set.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Lai Jiangshan [Thu, 8 Jan 2009 02:07:38 +0000 (18:07 -0800)]
cgroups: use task_lock() for access tsk->cgroups safe in cgroup_clone()
Use task_lock() protect tsk->cgroups and get_css_set(tsk->cgroups).
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Paul Menage <menage@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Lai Jiangshan [Thu, 8 Jan 2009 02:07:37 +0000 (18:07 -0800)]
cgroups: don't put struct cgroupfs_root protected by RCU
We don't access struct cgroupfs_root in fast path, so we should not put
struct cgroupfs_root protected by RCU
But the comment in struct cgroup_subsys.root confuse us.
struct cgroup_subsys.root is used in these places:
1 find_css_set(): if (ss->root->subsys_list.next == &ss->sibling)
2 rebind_subsystems(): if (ss->root != &rootnode)
rcu_assign_pointer(ss->root, root);
rcu_assign_pointer(subsys[i]->root, &rootnode);
3 cgroup_has_css_refs(): if (ss->root != cgrp->root)
4 cgroup_init_subsys(): ss->root = &rootnode;
5 proc_cgroupstats_show(): ss->name, ss->root->subsys_bits,
ss->root->number_of_cgroups, !ss->disabled);
6 cgroup_clone(): root = subsys->root;
if ((root != subsys->root) ||
All these place we have held cgroup_lock() or we don't dereference to
struct cgroupfs_root. It's means wo don't need RCU when use struct
cgroup_subsys.root, and we should not put struct cgroupfs_root protected
by RCU.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Reviewed-by: Paul Menage <menage@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Lai Jiangshan [Thu, 8 Jan 2009 02:07:36 +0000 (18:07 -0800)]
cgroups: fix cgroup_iter_next() bug
We access res->cgroups without the task_lock(), so res->cgroups may be
changed. it's unreliable, and "if (l == &res->cgroups->tasks)" may be
false forever.
We don't need add any lock for fixing this bug. we just access to struct
css_set by struct cg_cgroup_link, not by struct task_struct.
Since we hold css_set_lock, struct cg_cgroup_link is reliable.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Reviewed-by: Paul Menage <menage@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Lai Jiangshan [Thu, 8 Jan 2009 02:07:36 +0000 (18:07 -0800)]
cgroups: add lock for child->cgroups in cgroup_post_fork()
When cgroup_post_fork() is called, child is seen by find_task_by_vpid(),
so child->cgroups maybe be changed, It'll incorrect.
child->cgroups<old>'s refcnt is decreased
child->cgroups<new>'s refcnt is increased
but child->cg_list is added to child->cgroups<old>'s list.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Reviewed-by: Paul Menage <menage@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Li Zefan [Thu, 8 Jan 2009 02:07:35 +0000 (18:07 -0800)]
memcg: fix a typo in Kconfig
s/contoller/controller/
Signed-of-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Li Zefan [Thu, 8 Jan 2009 02:07:34 +0000 (18:07 -0800)]
ns_cgroup: remove unused spinlock
I happened to find the spinlock in struct ns_cgroup is never used.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Li Zefan [Thu, 8 Jan 2009 02:07:33 +0000 (18:07 -0800)]
cgroups: remove some redundant NULL checks
- In cgroup_clone(), if vfs_mkdir() returns successfully,
dentry->d_fsdata will be the pointer to the newly created
cgroup and won't be NULL.
- a cgroup file's dentry->d_fsdata won't be NULL, guaranteed
by cgroup_add_file().
- When walking through the subsystems of a cgroup_fs (using
for_each_subsys), cgrp->subsys[ss->subsys_id] won't be NULL,
guaranteed by cgroup_create().
(Also remove 2 unused variables in cgroup_rmdir().
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Li Zefan [Thu, 8 Jan 2009 02:07:32 +0000 (18:07 -0800)]
cgroups: documentation updates
- remove 'releasable' since it has been moved to the debug subsys.
- update lock requirements of subsys callbacks.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
KAMEZAWA Hiroyuki [Thu, 8 Jan 2009 02:07:30 +0000 (18:07 -0800)]
cgroups: make cgroup config a submenu
Making CGROUP related configs be a sub-menu.
This patch make CGROUP related configs be a sub-menu and makes 1st level
configs of "General Setup" shorter.
including following additional changes
- add help comment about CGROUPS and GROUP_SCHED.
- moved MM_OWNER config to the bottom.
(for good indent in menuconfig)
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Kara [Thu, 8 Jan 2009 02:07:29 +0000 (18:07 -0800)]
quota: don't set grace time when user isn't above softlimit
do_set_dqblk() allowed SETDQBLK quotactl to set user's grace time even if
user was not above his softlimit. This does not make much sence and by
coincidence causes quota code to omit softlimit warning when user really
exceeds softlimit. This patch makes do_set_dqblk() reset user's grace
time if he has not exceeded softlimit.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Richard A. Holden III [Thu, 8 Jan 2009 02:07:28 +0000 (18:07 -0800)]
coda: fix fs/coda/sysctl.c build warnings when !CONFIG_SYSCTL
Fix
fs/coda/sysctl.c:14: warning: 'fs_table_header' defined but not used
fs/coda/sysctl.c:44: warning: 'fs_table' defined but not used
these are only used when CONFIG_SYSCTL is defined.
Signed-off-by: Richard A. Holden III <aciddeath@gmail.com>
Cc: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randy Dunlap [Thu, 8 Jan 2009 02:07:27 +0000 (18:07 -0800)]
jbd: remove excess kernel-doc notation
Remove excess kernel-doc from fs/jbd/transaction.c:
Warning(linux-2.6.28-git5//fs/jbd/transaction.c:764): Excess function parameter 'credits' description in 'journal_get_write_access'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Duane Griffin [Thu, 8 Jan 2009 02:07:26 +0000 (18:07 -0800)]
ext3: tighten restrictions on inode flags
At the moment there are few restrictions on which flags may be set on
which inodes. Specifically DIRSYNC may only be set on directories and
IMMUTABLE and APPEND may not be set on links. Tighten that to disallow
TOPDIR being set on non-directories and only NODUMP and NOATIME to be set
on non-regular file, non-directories.
Introduces a flags masking function which masks flags based on mode and
use it during inode creation and when flags are set via the ioctl to
facilitate future consistency.
Signed-off-by: Duane Griffin <duaneg@dghda.com>
Acked-by: Andreas Dilger <adilger@sun.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Duane Griffin [Thu, 8 Jan 2009 02:07:26 +0000 (18:07 -0800)]
ext3: don't inherit inappropriate inode flags from parent
At present INDEX is the only flag that new ext3 inodes do NOT inherit from
their parent. In addition prevent the flags DIRTY, ECOMPR, IMAGIC and
TOPDIR from being inherited. List inheritable flags explicitly to prevent
future flags from accidentally being inherited.
This fixes the TOPDIR flag inheritance bug reported at
http://bugzilla.kernel.org/show_bug.cgi?id=9866.
Signed-off-by: Duane Griffin <duaneg@dghda.com>
Acked-by: Andreas Dilger <adilger@sun.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pekka Enberg [Thu, 8 Jan 2009 02:07:25 +0000 (18:07 -0800)]
ext3: allocate ->s_blockgroup_lock separately
As spotted by kmemtrace, struct ext3_sb_info is 17152 bytes on 64-bit
which makes it a very bad fit for SLAB allocators. The culprit of the
wasted memory is ->s_blockgroup_lock which can be as big as 16 KB when
NR_CPUS >= 32.
To fix that, allocate ->s_blockgroup_lock, which fits nicely in a order 2
page in the worst case, separately. This shinks down struct ext3_sb_info
enough to fit a 1 KB slab cache so now we allocate 16 KB + 1 KB instead of
32 KB saving 15 KB of memory.
Acked-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Josef Bacik [Thu, 8 Jan 2009 02:07:24 +0000 (18:07 -0800)]
jbd: improve fsync batching
There is a flaw with the way jbd handles fsync batching. If we fsync() a
file and we were not the last person to run fsync() on this fs then we
automatically sleep for 1 jiffie in order to wait for new writers to join
into the transaction before forcing the commit. The problem with this is
that with really fast storage (ie a Clariion) the time it takes to commit
a transaction to disk is way faster than 1 jiffie in most cases, so
sleeping means waiting longer with nothing to do than if we just committed
the transaction and kept going. Ric Wheeler noticed this when using
fs_mark with more than 1 thread, the throughput would plummet as he added
more threads.
This patch attempts to fix this problem by recording the average time in
nanoseconds that it takes to commit a transaction to disk, and what time
we started the transaction. If we run an fsync() and we have been running
for less time than it takes to commit the transaction to disk, we sleep
for the delta amount of time and then commit to disk. We acheive
sub-jiffie sleeping using schedule_hrtimeout. This means that the wait
time is auto-tuned to the speed of the underlying disk, instead of having
this static timeout. I weighted the average according to somebody's
comments (Andreas Dilger I think) in order to help normalize random
outliers where we take way longer or way less time to commit than the
average. I also have a min() check in there to make sure we don't sleep
longer than a jiffie in case our storage is super slow, this was requested
by Andrew.
I unfortunately do not have access to a Clariion, so I had to use a
ramdisk to represent a super fast array. I tested with a SATA drive with
barrier=1 to make sure there was no regression with local disks, I tested
with a 4 way multipathed Apple Xserve RAID array and of course the
ramdisk. I ran the following command
fs_mark -d /mnt/ext3-test -s 4096 -n 2000 -D 64 -t $i
where $i was 2, 4, 8, 16 and 32. I mkfs'ed the fs each time. Here are my
results
type threads with patch without patch
sata 2 24.6 26.3
sata 4 49.2 48.1
sata 8 70.1 67.0
sata 16 104.0 94.1
sata 32 153.6 142.7
xserve 2 246.4 222.0
xserve 4 480.0 440.8
xserve 8 829.5 730.8
xserve 16 1172.7 1026.9
xserve 32 1816.3 1650.5
ramdisk 2 2538.3 1745.6
ramdisk 4 2942.3 661.9
ramdisk 8 2882.5 999.8
ramdisk 16 2738.7 1801.9
ramdisk 32 2541.9 2394.0
Signed-off-by: Josef Bacik <jbacik@redhat.com>
Cc: Andreas Dilger <adilger@sun.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Ric Wheeler <rwheeler@redhat.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Duane Griffin [Thu, 8 Jan 2009 02:07:21 +0000 (18:07 -0800)]
ext2: tighten restrictions on inode flags
At the moment there are few restrictions on which flags may be set on
which inodes. Specifically DIRSYNC may only be set on directories and
IMMUTABLE and APPEND may not be set on links. Tighten that to disallow
TOPDIR being set on non-directories and only NODUMP and NOATIME to be set
on non-regular file, non-directories.
Introduces a flags masking function which masks flags based on mode and
use it during inode creation and when flags are set via the ioctl to
facilitate future consistency.
Signed-off-by: Duane Griffin <duaneg@dghda.com>
Acked-by: Andreas Dilger <adilger@sun.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Duane Griffin [Thu, 8 Jan 2009 02:07:20 +0000 (18:07 -0800)]
ext2: don't inherit inappropriate inode flags from parent
At present BTREE/INDEX is the only flag that new ext2 inodes do NOT
inherit from their parent. In addition prevent the flags DIRTY, ECOMPR,
INDEX, IMAGIC and TOPDIR from being inherited. List inheritable flags
explicitly to prevent future flags from accidentally being inherited.
This fixes the TOPDIR flag inheritance bug reported at
http://bugzilla.kernel.org/show_bug.cgi?id=9866.
Signed-off-by: Duane Griffin <duaneg@dghda.com>
Acked-by: Andreas Dilger <adilger@sun.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pekka J Enberg [Thu, 8 Jan 2009 02:07:19 +0000 (18:07 -0800)]
ext2: allocate ->s_blockgroup_lock separately
As spotted by kmemtrace, struct ext2_sb_info is 17024 bytes on 64-bit
which makes it a very bad fit for SLAB allocators. The culprit of the
wasted memory is ->s_blockgroup_lock which can be as big as 16 KB when
NR_CPUS >= 32.
To fix that, allocate ->s_blockgroup_lock, which fits nicely in a order 2
page in the worst case, separately. This shinks down struct ext2_sb_info
enough to fit a 1 KB slab cache so now we allocate 16 KB + 1 KB instead of
32 KB saving 15 KB of memory.
Acked-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Qinghuang Feng [Thu, 8 Jan 2009 02:07:18 +0000 (18:07 -0800)]
ext2: fix ext2_splice_branch() comments
There is no argument named @chain in ext2_splice_branch, remove references
to it.
Signed-off-by: Qinghuang Feng <qhfeng.kernel@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jüri Reitel [Thu, 8 Jan 2009 02:07:16 +0000 (18:07 -0800)]
rtc-ds1307: remove legacy probe() checks
Remove RTC register value checks from the rtc-ds1307 probe() function.
They were left over from the legacy style I2C driver, which had to defend
against finding a non-RTC chip when the driver was probed.
Also fix a minor glitch in the alarm support: DS1307 chips don't have
alarms, so name those methods after one of the chips which actually *do*
have alarms (DS1337).
Signed-off-by: Jüri Reitel <juri.reitel@liewenthal.ee>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Sebastien Barre <sbarre@sdelcc.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Acked-by: Jean Delvare <khali@linux-fr.org>
Cc: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
BARRE Sebastien [Thu, 8 Jan 2009 02:07:13 +0000 (18:07 -0800)]
rtc-ds1307: SMBus compatibility
Change i2c access functions to SMBus access functions in order to use the
ds1307 with SMBus adapter.
Signed-off-by: Sebastien Barre <sbarre@sdelcc.com>
Acked-by: David Brownell <david-b@pacbell.net>
Tested-by: David Brownell <david-b@pacbell.net>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Acked-by: Jean Delvare <khali@linux-fr.org>
Cc: Rodolfo Giometti <giometti@enneenne.com>
Tested-by: Sebastien Barre <sbarre@sdelcc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alex Zeffertt [Thu, 8 Jan 2009 02:07:11 +0000 (18:07 -0800)]
xen: add xenfs to allow usermode <-> Xen interaction
The xenfs filesystem exports various interfaces to usermode. Initially
this exports a file to allow usermode to interact with xenbus/xenstore.
Traditionally this appeared in /proc/xen. Rather than extending procfs,
this patch adds a backward-compat mountpoint on /proc/xen, and provides
a xenfs filesystem which can be mounted there.
Signed-off-by: Alex Zeffertt <alex.zeffertt@eu.citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Qinghuang Feng [Thu, 8 Jan 2009 02:07:10 +0000 (18:07 -0800)]
drivers/xen/xenbus/xenbus_client.c: cleanup kerneldoc
no argument named @xbt in xenbus_switch_state(), remove it.
Signed-off-by: Qinghuang Feng <qhfeng.kernel@gmail.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dave Kleikamp [Thu, 8 Jan 2009 15:46:31 +0000 (09:46 -0600)]
async: Don't call async_synchronize_full_special() while holding sb_lock
sync_filesystems() shouldn't be calling async_synchronize_full_special
while holding a spinlock. The second while loop in that function is the
right place for this anyway.
Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Reported-by: Grissiom <chaos.proton@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 8 Jan 2009 01:23:53 +0000 (17:23 -0800)]
Merge git://git./linux/kernel/git/davem/sparc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
sparc64: Work around branch tracer warning.
sparc64: Fix unsigned long long warnings in drivers.
sparc64: Use unsigned long long for u64.
sparc: refactor code in fault_32.c
sparc64: refactor code in init_64.c
sparc64: refactor code in viohs.c
sparc: make proces_ver_nack a bit more readable
Linus Torvalds [Thu, 8 Jan 2009 01:22:04 +0000 (17:22 -0800)]
Merge branch 'for_linus' of git://git./linux/kernel/git/mchehab/linux-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6:
V4L/DVB (10191a): Update MAINTAINERS entries on media drivers
V4L/DVB (10190): cx88: Fix some Kbuild troubles
V4L/DVB (10189): dm1105: Fix build with INPUT=m and DVB_DM1105=y
V4L/DVB (10185): Use negated usb_endpoint_xfer_control, etc
V4L/DVB (10182): tda8290: fix TDA8290 + TDA18271 initialization
V4L/DVB (10181): v4l2-device: Fix some sparse warnings
V4L/DVB (10180): drivers/media: Fix a number of sparse warnings
V4L/DVB (10179): tda8290: Fix two sparse warnings
V4L/DVB (10178): dvb_frontend: Fix some sparse warnings due to static symbols
V4L/DVB (10177): Fix sparse warnings on em28xx
V4L/DVB (10176b): pxa-camera: fix redefinition warnings and missing DMA definitions
V4L/DVB (10176a): Switch remaining clear_user_page users over to clear_user_highpage
Linus Torvalds [Thu, 8 Jan 2009 01:21:24 +0000 (17:21 -0800)]
Merge branch 'for-2.6.29' of git://linux-nfs.org/~bfields/linux
* 'for-2.6.29' of git://linux-nfs.org/~bfields/linux: (67 commits)
nfsd: get rid of NFSD_VERSION
nfsd: last_byte_offset
nfsd: delete wrong file comment from nfsd/nfs4xdr.c
nfsd: git rid of nfs4_cb_null_ops declaration
nfsd: dprint each op status in nfsd4_proc_compound
nfsd: add etoosmall to nfserrno
NFSD: FIDs need to take precedence over UUIDs
SUNRPC: The sunrpc server code should not be used by out-of-tree modules
svc: Clean up deferred requests on transport destruction
nfsd: fix double-locks of directory mutex
svc: Move kfree of deferral record to common code
CRED: Fix NFSD regression
NLM: Clean up flow of control in make_socks() function
NLM: Refactor make_socks() function
nfsd: Ensure nfsv4 calls the underlying filesystem on LOCKT
SUNRPC: Ensure the server closes sockets in a timely fashion
NFSD: Add documenting comments for nfsctl interface
NFSD: Replace open-coded integer with macro
NFSD: Fix a handful of coding style issues in write_filehandle()
NFSD: clean up failover sysctl function naming
...
David S. Miller [Thu, 8 Jan 2009 01:15:57 +0000 (17:15 -0800)]
sparc64: Work around branch tracer warning.
As reported by Sam Ravnborg, Gcc-3.4.5 does not handle:
if (get_user() || get_user())
with the new branch tracer enabled.
Just seperate it out into seperate statements for now
so people can get work done.
Signed-off-by: David S. Miller <davem@davemloft.net>
Mauro Carvalho Chehab [Fri, 2 Jan 2009 14:27:44 +0000 (11:27 -0300)]
V4L/DVB (10191a): Update MAINTAINERS entries on media drivers
This patch updates the MAINTAINERS entries for the media drivers.
We are doing a few changes during 2009 to improve patch handling for
drivers/media stuff.
Currently, v4l-dvb-maintainer list at linuxtv.org were used to to be v4l/dvb
driver maintainers ML, in order to keep track of patch merge requests and to
receive bug fixes. This list allows posting for everybody, but, in order to
avoid spam, the user subscribe/unsubscribe at the ML is moderated. Other
development discussions and end-user forums happened on two separated ML (one
for V4L and another for DVB).
At the beginning of 2009, we've created linux-media@vger.kernel.org, meaning to
be the main upstream development mailing list for drivers/media, including V4L
and DVB core and drivers.
The choice for vger.kernel.org were due to the fact that most of upstream lists
are there. Also, its anti-spam filtering rules are better than what we
currently have at linuxtv.org.
For now, both video4linux-list and linux-dvb ML will remain active, but more
focused on end users. It is expected that those lists will gradually be
replaced also by linux-media@vger.kernel.org.
This patch reflect those changes at linux MAINTAINERS file.
Since the development and bug fix discussions will now happen at
linux-media@vger.kernel.org, this patch does the following changes
- replaces v4l-dvb-maintainer ML for the new
linux-media@vger.kernel.org;
- replaces video4linux ML for the new linux-media@vger.kernel.org;
While here, it also:
- Fixes the existing -git tree entries for drivers/media (since the
repository name changed);
- Adds the missing drivers/media -git tree entry on a few maintainers
entries that don't point to a tree.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 6 Jan 2009 19:06:07 +0000 (16:06 -0300)]
V4L/DVB (10190): cx88: Fix some Kbuild troubles
As Randy Dunlap <randy.dunlap@oracle.com> reported, cx88 has some compilation issues:
drivers/built-in.o: In function `cx88_call_i2c_clients':
(.text+0x20af17): undefined reference to `videobuf_dvb_get_frontend'
drivers/built-in.o: In function `cx8802_probe':
cx88-mpeg.c:(.devinit.text+0x268c4): undefined reference to `videobuf_dvb_alloc_frontend'
cx88-mpeg.c:(.devinit.text+0x268ea): undefined reference to `videobuf_dvb_dealloc_frontends'
With those configs:
CONFIG_VIDEO_CX88=y
CONFIG_VIDEO_CX88_BLACKBIRD=y
CONFIG_VIDEO_CX88_DVB=m
CONFIG_DVB_CORE=m
After carefully examining the code, with the current code, several cx88 drivers
(cx8800, cx8802, cx88_dvb and cx88_blackbird) should be compiled as a module,
if one of them is marked as such. Just fixing Kconfig could create a very complex
set of rules. Also, this hides a problem with the current approach where the dvb
functionality weren't confined inside dvb module.
What happens is that:
- cx88-i2c (part of cx8800) has some special rules if DVB;
- cx88-mpeg (cx8802 module) has also part of DVB init code;
- cx88-dvb has the rest of the dvb code;
- cx88-blackbird can be used with cx88-mpeg, having cx88-dvb or not.
So, instead of doing some tricks at Kconfig and wait for a next breakage,
this patch moves the dvb code inside cx88-i2c and cx88-mpeg into cx88-dvb.
Another problem is that cx8802 were being compiled, even without cx88-dvb
and cx88-blackbird modules.
While on this code, let's fix also a reported problem:
http://www.linuxtv.org/pipermail/linux-dvb/2009-January/031225.html
A solution for the issue were proposed here:
http://www.mail-archive.com/linux-media@vger.kernel.org/msg00021.html
Thanks to Randy, Andy, Gregoire and Thomas for helping us to detect
and solve the issues.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 6 Jan 2009 11:33:46 +0000 (08:33 -0300)]
V4L/DVB (10189): dm1105: Fix build with INPUT=m and DVB_DM1105=y
As reported by Randy Dunlap <randy.dunlap@oracle.com>:
With CONFIG_INPUT=m and CONFIG_DVB_DM1105=y:
drivers/built-in.o: In function `input_sync':
dm1105.c:(.text+0x120c33): undefined reference to `input_event'
drivers/built-in.o: In function `dm1105_emit_key':
dm1105.c:(.text+0x120c6c): undefined reference to `input_event'
dm1105.c:(.text+0x120c82): undefined reference to `input_event'
dm1105.c:(.text+0x120cb2): undefined reference to `input_event'
dm1105.c:(.text+0x120cd1): undefined reference to `input_event'
drivers/built-in.o: In function `dm1105_ir_init':
(.devinit.text+0xd8ae): undefined reference to `input_allocate_device'
drivers/built-in.o: In function `dm1105_ir_init':
(.devinit.text+0xd9f6): undefined reference to `input_register_device'
drivers/built-in.o: In function `dm1105_ir_init':
(.devinit.text+0xda09): undefined reference to `input_free_device'
drivers/built-in.o: In function `dm1105_ir_exit':
(.devexit.text+0xcde): undefined reference to `input_unregister_device'
This is due to the lack of a dependency between dm1105 and CONFIG_INPUT
Cc: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Julia Lawall [Sat, 3 Jan 2009 19:53:10 +0000 (16:53 -0300)]
V4L/DVB (10185): Use negated usb_endpoint_xfer_control, etc
This patch extends
134179823b3ca9c8b98e0631906459dbb022ff9b by using
usb_endpoint_xfer_control, usb_endpoint_xfer_isoc, usb_endpoint_xfer_bulk,
and usb_endpoint_xfer_int in the negated case as well.
The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@@ struct usb_endpoint_descriptor *epd; @@
- (usb_endpoint_type(epd) != \(USB_ENDPOINT_XFER_CONTROL\|0\))
+ !usb_endpoint_xfer_control(epd)
@@ struct usb_endpoint_descriptor *epd; @@
- (usb_endpoint_type(epd) != \(USB_ENDPOINT_XFER_ISOC\|1\))
+ !usb_endpoint_xfer_isoc(epd)
@@ struct usb_endpoint_descriptor *epd; @@
- (usb_endpoint_type(epd) != \(USB_ENDPOINT_XFER_BULK\|2\))
+ !usb_endpoint_xfer_bulk(epd)
@@ struct usb_endpoint_descriptor *epd; @@
- (usb_endpoint_type(epd) != \(USB_ENDPOINT_XFER_INT\|3\))
+ !usb_endpoint_xfer_int(epd)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michael Krufky [Mon, 5 Jan 2009 21:25:04 +0000 (18:25 -0300)]
V4L/DVB (10182): tda8290: fix TDA8290 + TDA18271 initialization
Don't call tda8290_init_tuner unless we have either a TDA8275 or TDA8275A
present. Calling this function will cause a TDA18271 to get sick, so we
should only call it when needed.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 5 Jan 2009 04:42:38 +0000 (01:42 -0300)]
V4L/DVB (10181): v4l2-device: Fix some sparse warnings
/home/v4l/master/v4l/v4l2-device.c:32:2: warning: Using plain integer as NULL pointer
/home/v4l/master/v4l/v4l2-device.c:64:2: warning: Using plain integer as NULL pointer
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 5 Jan 2009 04:34:20 +0000 (01:34 -0300)]
V4L/DVB (10180): drivers/media: Fix a number of sparse warnings
anysee.c:44:5: warning: symbol 'dvb_usb_anysee_delsys' was not declared. Should it be static?
cx24116.c:378:3: warning: symbol 'CX24116_MODFEC_MODES' was not declared. Should it be static?
stb0899_algo.c:57:5: warning: symbol 'stb0899_get_srate' was not declared. Should it be static?
stb0899_algo.c:766:6: warning: symbol 'Log2Int' was not declared. Should it be static?
stb0899_drv.c:137:20: warning: symbol 'stb0899_quant_tab' was not declared. Should it be static?
stb0899_drv.c:180:20: warning: symbol 'stb0899_est_tab' was not declared. Should it be static?
stb0899_drv.c:220:5: warning: symbol '_stb0899_read_reg' was not declared. Should it be static?
budget-ci.c:1348:23: warning: symbol 'tt3200_stb6100_config' was not declared. Should it be static?
/home/v4l/master/v4l/cx25840-core.c:190:6: warning: symbol 'cx25840_work_handler' was not declared. Should it be static?
/home/v4l/master/v4l/m5602_s5k83a.c:116:6: warning: symbol 's5k83a_dump_registers' was not declared. Should it be static?
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 5 Jan 2009 04:23:50 +0000 (01:23 -0300)]
V4L/DVB (10179): tda8290: Fix two sparse warnings
/home/v4l/master/v4l/tda8290.c:233:7: warning: symbol 'i' shadows an earlier one
/home/v4l/master/v4l/tda8290.c:178:3: warning: symbol 'fm_mode' was not declared. Should it be static?
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 5 Jan 2009 04:19:06 +0000 (01:19 -0300)]
V4L/DVB (10178): dvb_frontend: Fix some sparse warnings due to static symbols
/home/v4l/master/v4l/dvb_frontend.c:838:19: warning: symbol 'dtv_cmds' was not declared. Should it be static?
/home/v4l/master/v4l/dvb_frontend.c:1035:6: warning: symbol 'dtv_property_dump' was not declared. Should it be static?
/home/v4l/master/v4l/dvb_frontend.c:1066:5: warning: symbol 'is_legacy_delivery_system' was not declared. Should it be static?
/home/v4l/master/v4l/dvb_frontend.c:1080:6: warning: symbol 'dtv_property_cache_sync' was not declared. Should it be static?
/home/v4l/master/v4l/dvb_frontend.c:1132:6: warning: symbol 'dtv_property_legacy_params_sync' was not declared. Should it be static?
/home/v4l/master/v4l/dvb_frontend.c:1187:6: warning: symbol 'dtv_property_adv_params_sync' was not declared. Should it be static?
/home/v4l/master/v4l/dvb_frontend.c:1222:6: warning: symbol 'dtv_property_cache_submit' was not declared. Should it be static?
/home/v4l/master/v4l/dvb_frontend.c:1253:5: warning: symbol 'dtv_property_process_get' was not declared. Should it be static?
/home/v4l/master/v4l/dvb_frontend.c:1362:5: warning: symbol 'dtv_property_process_set' was not declared. Should it be static?
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 5 Jan 2009 04:00:40 +0000 (01:00 -0300)]
V4L/DVB (10177): Fix sparse warnings on em28xx
/home/v4l/master/v4l/em28xx-core.c:396:25: warning: symbol 'outputs' was not declared. Should it be static?
/home/v4l/master/v4l/em28xx-input.c:324:6: warning: symbol 'em28xx_ir_start' was not declared. Should it be static?
/home/v4l/master/v4l/em28xx-cards.c:1925:5: warning: symbol 'em28xx_init_dev' was not declared. Should it be static?
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Eric Miao [Fri, 2 Jan 2009 15:16:02 +0000 (12:16 -0300)]
V4L/DVB (10176b): pxa-camera: fix redefinition warnings and missing DMA definitions
1. now pxa_camera.c uses ioremap() for register access, pxa_camera.h is
totally useless. Remove it.
2. <asm/dma.h> does no longer include <mach/dma.h>, include the latter
file explicitly
delete mode 100644 drivers/media/video/pxa_camera.h
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Guennadi Liakhovetski [Sat, 3 Jan 2009 21:20:04 +0000 (18:20 -0300)]
V4L/DVB (10176a): Switch remaining clear_user_page users over to clear_user_highpage
Not all architectures provide clear_user_page(), but clear_user_highpage()
is available everywhere at least via the compatibility inline function.
Is this the "trivial patch" that's required for these two drivers?
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Harvey Harrison [Wed, 7 Jan 2009 22:31:57 +0000 (14:31 -0800)]
staging: __FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Harvey Harrison [Wed, 7 Jan 2009 22:42:41 +0000 (14:42 -0800)]
trivial: replace last usages of __FUNCTION__ in kernel
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 7 Jan 2009 23:43:58 +0000 (15:43 -0800)]
Merge branch 'sched-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
sched: fix possible recursive rq->lock
Linus Torvalds [Wed, 7 Jan 2009 23:41:01 +0000 (15:41 -0800)]
Merge branch 'linux-next' of git://git./linux/kernel/git/jbarnes/pci-2.6
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (98 commits)
PCI PM: Put PM callbacks in the order of execution
PCI PM: Run default PM callbacks for all devices using new framework
PCI PM: Register power state of devices during initialization
PCI PM: Call pci_fixup_device from legacy routines
PCI PM: Rearrange code in pci-driver.c
PCI PM: Avoid touching devices behind bridges in unknown state
PCI PM: Move pci_has_legacy_pm_support
PCI PM: Power-manage devices without drivers during suspend-resume
PCI PM: Add suspend counterpart of pci_reenable_device
PCI PM: Fix poweroff and restore callbacks
PCI: Use msleep instead of cpu_relax during ASPM link retraining
PCI: PCIe portdrv: Add kerneldoc comments to remining core funtions
PCI: PCIe portdrv: Rearrange code so that related things are together
PCI: PCIe portdrv: Fix suspend and resume of PCI Express port services
PCI: PCIe portdrv: Add kerneldoc comments to some core functions
x86/PCI: Do not use interrupt links for devices using MSI-X
net: sfc: Use pci_clear_master() to disable bus mastering
PCI: Add pci_clear_master() as opposite of pci_set_master()
PCI hotplug: remove redundant test in cpq hotplug
PCI: pciehp: cleanup register and field definitions
...
Linus Torvalds [Wed, 7 Jan 2009 23:37:24 +0000 (15:37 -0800)]
Merge git://git./linux/kernel/git/gregkh/usb-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (123 commits)
wimax/i2400m: add CREDITS and MAINTAINERS entries
wimax: export linux/wimax.h and linux/wimax/i2400m.h with headers_install
i2400m: Makefile and Kconfig
i2400m/SDIO: TX and RX path backends
i2400m/SDIO: firmware upload backend
i2400m/SDIO: probe/disconnect, dev init/shutdown and reset backends
i2400m/SDIO: header for the SDIO subdriver
i2400m/USB: TX and RX path backends
i2400m/USB: firmware upload backend
i2400m/USB: probe/disconnect, dev init/shutdown and reset backends
i2400m/USB: header for the USB bus driver
i2400m: debugfs controls
i2400m: various functions for device management
i2400m: RX and TX data/control paths
i2400m: firmware loading and bootrom initialization
i2400m: linkage to the networking stack
i2400m: Generic probe/disconnect, reset and message passing
i2400m: host/device procotol and core driver definitions
i2400m: documentation and instructions for usage
wimax: Makefile, Kconfig and docbook linkage for the stack
...
Linus Torvalds [Wed, 7 Jan 2009 23:35:47 +0000 (15:35 -0800)]
Merge git://git./linux/kernel/git/arjan/linux-2.6-async
* git://git.kernel.org/pub/scm/linux/kernel/git/arjan/linux-2.6-async:
async: don't do the initcall stuff post boot
bootchart: improve output based on Dave Jones' feedback
async: make the final inode deletion an asynchronous event
fastboot: Make libata initialization even more async
fastboot: make the libata port scan asynchronous
fastboot: make scsi probes asynchronous
async: Asynchronous function calls to speed up kernel boot
David Miller [Wed, 7 Jan 2009 23:30:05 +0000 (15:30 -0800)]
topology: Fix sparc64 build.
Due to changeset
ba84be2338d3a2b6020d39279335bb06fcd332e1 ("remove
linux/hardirq.h from asm-generic/local.h") the sparc64 build started
failing on drivers/base/topology.c:
drivers/base/topology.c: In function ‘show_physical_package_id’:
drivers/base/topology.c:103: error: implicit declaration of function ‘cpu_data’
drivers/base/topology.c:103: error: request for member ‘proc_id’ in something not a structure or union
drivers/base/topology.c: In function ‘show_core_id’:
drivers/base/topology.c:106: error: request for member ‘core_id’ in something not a structure or union
Adding the obvious fix of including asm/cpudata.h into asm/topology.h on
sparc64 doesn't fix it, in fact it makes things worse because of the
header file dependency chain:
linux/gfp.h --> linux/mmzone.h --> linux/topology.h -->
asm/topology.h --> asm/cpudata.h --> linux/percpu.h -->
linux/slab.h
which results in:
include/linux/slub_def.h: In function ‘kmalloc_large’:
include/linux/slub_def.h:209: error: implicit declaration of function ‘__get_free_pages’
include/linux/slub_def.h:209: error: ‘__GFP_COMP’ undeclared (first use in this function)
include/linux/slub_def.h:209: error: (Each undeclared identifier is reported only once
include/linux/slub_def.h:209: error: for each function it appears in.)
include/linux/slub_def.h:209: warning: cast to pointer from integer of different size
The simplest thing to do is to add yet another one-off hack like parts
of the guilty changeset did, by putting an explicit linux/hardirq.h
include into drivers/base/topology.c
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Benny Halevy [Mon, 15 Dec 2008 17:42:24 +0000 (19:42 +0200)]
nfsd: get rid of NFSD_VERSION
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Benny Halevy [Mon, 15 Dec 2008 17:42:03 +0000 (19:42 +0200)]
nfsd: last_byte_offset
refactor the nfs4 server lock code to use last_byte_offset
to compute the last byte covered by the lock. Check for overflow
so that the last byte is set to NFS4_MAX_UINT64 if offset + len
wraps around.
Also, use NFS4_MAX_UINT64 for ~(u64)0 where appropriate.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Marc Eshel [Mon, 15 Dec 2008 17:41:31 +0000 (19:41 +0200)]
nfsd: delete wrong file comment from nfsd/nfs4xdr.c
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Benny Halevy [Mon, 15 Dec 2008 17:41:10 +0000 (19:41 +0200)]
nfsd: git rid of nfs4_cb_null_ops declaration
There's no use for nfs4_cb_null_ops's declaration in fs/nfsd/nfs4callback.c
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Benny Halevy [Mon, 15 Dec 2008 17:40:49 +0000 (19:40 +0200)]
nfsd: dprint each op status in nfsd4_proc_compound
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Dean Hildebrand [Mon, 15 Dec 2008 17:40:15 +0000 (19:40 +0200)]
nfsd: add etoosmall to nfserrno
Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Steve Dickson [Wed, 7 Jan 2009 21:54:30 +0000 (16:54 -0500)]
NFSD: FIDs need to take precedence over UUIDs
When determining the fsid_type in fh_compose(), the setting of the FID
via fsid= export option needs to take precedence over using the UUID
device id.
Signed-off-by: Steve Dickson <steved@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Trond Myklebust [Tue, 23 Dec 2008 21:30:12 +0000 (16:30 -0500)]
SUNRPC: The sunrpc server code should not be used by out-of-tree modules
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Tom Tucker [Mon, 5 Jan 2009 21:21:19 +0000 (15:21 -0600)]
svc: Clean up deferred requests on transport destruction
A race between svc_revisit and svc_delete_xprt can result in
deferred requests holding references on a transport that can never be
recovered because dead transports are not enqueued for subsequent
processing.
Check for XPT_DEAD in revisit to clean up completing deferrals on a dead
transport and sweep a transport's deferred queue to do the same for queued
but unprocessed deferrals.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Linus Torvalds [Wed, 7 Jan 2009 21:11:28 +0000 (13:11 -0800)]
Merge git://git./linux/kernel/git/sam/kbuild-fixes
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes:
kbuild: fix typos (s/bin_shipped/bin.o_shipped/) in Documentation
kbuild: add a symlink to the source for separate objdirs
kconfig: add script to manipulate .config files on the command line
kbuild: reintroduce ALLSOURCE_ARCHS support for tags/cscope
bootchart: improve output based on Dave Jones' feedback
fix modules_install via NFS
qnx: include <linux/types.h> for definitions of __[us]{8,16,32,64} types
Wolfram Sang [Tue, 6 Jan 2009 14:12:27 +0000 (15:12 +0100)]
kbuild: fix typos (s/bin_shipped/bin.o_shipped/) in Documentation
The text always mentions ...bin.o_shipped, just the example makefiles
actually use ...bin_shipped. It was corrected in one place some time
ago, these ones seem to have been forgotten.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Andi Kleen [Sat, 3 Jan 2009 02:21:42 +0000 (03:21 +0100)]
kbuild: add a symlink to the source for separate objdirs
I have some scripts which need to map back to the source directory
from an objdir. This was so far done by parsing the Makefile,
but the Makefile format changes occasionally and breaks my scripts
then.
To make this more reliable add a "source" symlink back.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Andi Kleen [Sat, 3 Jan 2009 02:21:41 +0000 (03:21 +0100)]
kconfig: add script to manipulate .config files on the command line
I often change single options in .config files. Instead of using
an editor or one of the frontends it's convenient to do this from
the command line. It's also useful to do from automated build scripts
when building different variants from a base config file.
I extracted most of the CONFIG manipulation code from one of my
build scripts into a new shell script scripts/config
The script is not integrated with the normal Kconfig machinery
and doesn't do any checking against Kconfig files, but just manipulates
that text format. This is always done at make time anyways.
I believe this script would be a useful standard addition for scripts/*
Sample usage:
./scripts/config --disable smp
Disable SMP in .config file
./scripts/config --file otherdir/.config --module e1000e
Enable E1000E as module in otherdir/.config
./scripts/config --state smp
y
Check state of config option CONFIG_SMP
After merging into git please make scripts/config executable
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Jike Song [Mon, 5 Jan 2009 06:57:03 +0000 (14:57 +0800)]
kbuild: reintroduce ALLSOURCE_ARCHS support for tags/cscope
This patch reintroduce the ALLSOURCE_ARCHS support for tags/TAGS/
cscope targets. The Kbuild previously has this feature, but after
moving the targets into scripts/tags.sh, ALLSOURCE_ARCHS disappears.
It's something like this:
$ make ALLSOURCE_ARCHS="x86 mips arm" tags cscope
Signed-off-by: Jike Song <albcamus@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Arjan van de Ven [Sun, 4 Jan 2009 15:16:38 +0000 (07:16 -0800)]
bootchart: improve output based on Dave Jones' feedback
Dave Jones, in his blog, had some feedback about the bootchart script:
Primarily his complaint was that shorter delays weren't visualized.
The reason for that was that too small delays will have their labels
mixed up in the graph in an unreadable mess.
This patch has a fix for this; for one, it makes the output wider,
so more will fit.
The second part is that smaller delays are now shown with a
much smaller font for the label; while this isn't per se
readable at a 1:1 zoom, at least you can zoom in with most SVG
viewing applications and see what it is you are looking at.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Sam Ravnborg [Wed, 7 Jan 2009 19:52:43 +0000 (20:52 +0100)]
fix modules_install via NFS
Rafael reported:
I get the following error from 'make modules_install' on my test boxes:
HOSTCC firmware/ihex2fw
/home/rafael/src/linux-2.6/firmware/ihex2fw.c:268: fatal error: opening dependency file firmware/.ihex2fw.d: Read-only file system
compilation terminated.
make[3]: *** [firmware/ihex2fw] Error 1
make[2]: *** [_modinst_post] Error 2
make[1]: *** [sub-make] Error 2
make: *** [all] Error 2
where the configuration is that the kernel is compiled on a build box
with 'make O=<destdir> -j5' and then <destdir> is mounted over NFS read-only by
each test box (full path to this directory is the same on the build box and on
the test boxes). Then, I cd into <destdir>, run 'make modules_install' and get
the error above.
The issue turns out to be that we when we install firmware pick
up the list of firmware blobs from firmware/Makefile.
And this triggers the Makefile rules to update ihex2fw.
There were two solutions for this issue:
1) Move the list of firmware blobs to a separate file
2) Avoid ihex2fw rebuild by moving it to scripts
As I seriously beleive that the list of firmware blobs should be
done in a fundamental different way solution 2) was selected.
Reported-and-tested-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Anders Larsen [Thu, 1 Jan 2009 16:17:35 +0000 (17:17 +0100)]
qnx: include <linux/types.h> for definitions of __[us]{8,16,32,64} types
On 2008-12-30 11:32:33, Sam Ravnborg wrote:
> We have added a few additional validation checks of the userspace headers:
...
> 3) We should include <linux/types.h> and not <asm/types.h>
> 4) If we use a __[us]{8,16,32,64} type then we must include <linux/types.h>
Satisfy these requirements for the linux/qnx*.h headers.
Signed-off-by: Anders Larsen <al@alarsen.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
J. Bruce Fields [Tue, 6 Jan 2009 18:37:03 +0000 (13:37 -0500)]
nfsd: fix double-locks of directory mutex
A number of nfsd operations depend on the i_mutex to cover more code
than just the fsync, so the approach of
4c728ef583b3d8 "add a vfs_fsync
helper" doesn't work for nfsd. Revert the parts of those patches that
touch nfsd.
Note: we can't, however, remove the logic from vfs_fsync that was needed
only for the special case of nfsd, because a vfs_fsync(NULL,...) call
can still result indirectly from a stackable filesystem that was called
by nfsd. (Thanks to Christoph Hellwig for pointing this out.)
Reported-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Tom Tucker [Mon, 5 Jan 2009 17:12:52 +0000 (11:12 -0600)]
svc: Move kfree of deferral record to common code
The rqstp structure has a pointer to a svc_deferred_req record
that is allocated when requests are deferred. This record is common
to all transports and can be freed in common code.
Move the kfree of the rq_deferred to the common svc_xprt_release
function.
This also fixes a memory leak in the RDMA transport which does not
kfree the dr structure in it's version of the xpo_release_rqst callback.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
David Howells [Mon, 5 Jan 2009 17:19:37 +0000 (17:19 +0000)]
CRED: Fix NFSD regression
Fix a regression in NFSD's permission checking introduced by the credentials
patches. There are two parts to the problem, both in nfsd_setuser():
(1) The return value of set_groups() is -ve if in error, not 0, and should be
checked appropriately. 0 indicates success.
(2) The UID to use for fs accesses is in new->fsuid, not new->uid (which is
0). This causes CAP_DAC_OVERRIDE to always be set, rather than being
cleared if the UID is anything other than 0 after squashing.
Reported-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
projects / GitHub / exynos8895 / android_kernel_samsung_universal8895.git / log