Josh Triplett [Sat, 28 Mar 2020 22:34:15 +0000 (15:34 -0700)]
ext4: fix incorrect inodes per group in error message
commit
b9c538da4e52a7b79dfcf4cfa487c46125066dfb upstream.
If ext4_fill_super detects an invalid number of inodes per group, the
resulting error message printed the number of blocks per group, rather
than the number of inodes per group. Fix it to print the correct value.
Fixes:
cd6bb35bf7f6d ("ext4: use more strict checks for inodes_per_block on mount")
Link: https://lore.kernel.org/r/8be03355983a08e5d4eed480944613454d7e2550.1585434649.git.josh@joshtriplett.org
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Josh Triplett [Sat, 28 Mar 2020 21:54:01 +0000 (14:54 -0700)]
ext4: fix incorrect group count in ext4_fill_super error message
commit
df41460a21b06a76437af040d90ccee03888e8e5 upstream.
ext4_fill_super doublechecks the number of groups before mounting; if
that check fails, the resulting error message prints the group count
from the ext4_sb_info sbi, which hasn't been set yet. Print the freshly
computed group count instead (which at that point has just been computed
in "blocks_count").
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Fixes:
4ec1102813798 ("ext4: Add sanity checks for the superblock before mounting the filesystem")
Link: https://lore.kernel.org/r/8b957cd1513fcc4550fe675c10bcce2175c33a49.1585431964.git.josh@joshtriplett.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
zhangyi (F) [Mon, 17 Feb 2020 11:27:06 +0000 (19:27 +0800)]
jbd2: improve comments about freeing data buffers whose page mapping is NULL
commit
780f66e59231fcf882f36c63f287252ee47cc75a upstream.
Improve comments in jbd2_journal_commit_transaction() to describe why
we don't need to clear the buffer_mapped bit for freeing file mapping
buffers whose page mapping is NULL.
Link: https://lore.kernel.org/r/20200217112706.20085-1-yi.zhang@huawei.com
Fixes:
c96dceeabf76 ("jbd2: do not clear the BH_Mapped flag when forgetting a metadata buffer")
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Can Guo [Tue, 11 Feb 2020 03:40:48 +0000 (19:40 -0800)]
scsi: ufs: Fix ufshcd_hold() caused scheduling while atomic
commit
c63d6099a7959ecc919b2549dc6b71f53521f819 upstream.
The async version of ufshcd_hold(async == true), which is only called in
queuecommand path as for now, is expected to work in atomic context, thus
it should not sleep or schedule out. When it runs into the condition that
clocks are ON but link is still in hibern8 state, it should bail out
without flushing the clock ungate work.
Fixes:
f2a785ac2312 ("scsi: ufshcd: Fix race between clk scaling and ungate work")
Link: https://lore.kernel.org/r/1581392451-28743-6-git-send-email-cang@codeaurora.org
Reviewed-by: Hongwu Su <hongwus@codeaurora.org>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tim Stallard [Fri, 3 Apr 2020 20:26:21 +0000 (21:26 +0100)]
net: ipv6: do not consider routes via gateways for anycast address check
[ Upstream commit
03e2a984b6165621f287fadf5f4b5cd8b58dcaba ]
The behaviour for what is considered an anycast address changed in
commit
45e4fd26683c ("ipv6: Only create RTF_CACHE routes after
encountering pmtu exception"). This now considers the first
address in a subnet where there is a route via a gateway
to be an anycast address.
This breaks path MTU discovery and traceroutes when a host in a
remote network uses the address at the start of a prefix
(eg 2600:: advertised as 2600::/48 in the DFZ) as ICMP errors
will not be sent to anycast addresses.
This patch excludes any routes with a gateway, or via point to
point links, like the behaviour previously from
rt6_is_gw_or_nonexthop in net/ipv6/route.c.
This can be tested with:
ip link add v1 type veth peer name v2
ip netns add test
ip netns exec test ip link set lo up
ip link set v2 netns test
ip link set v1 up
ip netns exec test ip link set v2 up
ip addr add 2001:db8::1/64 dev v1 nodad
ip addr add 2001:db8:100:: dev lo nodad
ip netns exec test ip addr add 2001:db8::2/64 dev v2 nodad
ip netns exec test ip route add unreachable 2001:db8:1::1
ip netns exec test ip route add 2001:db8:100::/64 via 2001:db8::1
ip netns exec test sysctl net.ipv6.conf.all.forwarding=1
ip route add 2001:db8:1::1 via 2001:db8::2
ping -I 2001:db8::1 2001:db8:1::1 -c1
ping -I 2001:db8:100:: 2001:db8:1::1 -c1
ip addr delete 2001:db8:100:: dev lo
ip netns delete test
Currently the first ping will get back a destination unreachable ICMP
error, but the second will never get a response, with "icmp6_send:
acast source" logged. After this patch, both get destination
unreachable ICMP replies.
Fixes:
45e4fd26683c ("ipv6: Only create RTF_CACHE routes after encountering pmtu exception")
Signed-off-by: Tim Stallard <code@timstallard.me.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wang Wenhu [Thu, 9 Apr 2020 02:53:53 +0000 (19:53 -0700)]
net: qrtr: send msgs from local of same id as broadcast
[ Upstream commit
6dbf02acef69b0742c238574583b3068afbd227c ]
If the local node id(qrtr_local_nid) is not modified after its
initialization, it equals to the broadcast node id(QRTR_NODE_BCAST).
So the messages from local node should not be taken as broadcast
and keep the process going to send them out anyway.
The definitions are as follow:
static unsigned int qrtr_local_nid = NUMA_NO_NODE;
Fixes:
fdf5fd397566 ("net: qrtr: Broadcast messages only from control port")
Signed-off-by: Wang Wenhu <wenhu.wang@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Taras Chornyi [Thu, 9 Apr 2020 17:25:24 +0000 (20:25 +0300)]
net: ipv4: devinet: Fix crash when add/del multicast IP with autojoin
[ Upstream commit
690cc86321eb9bcee371710252742fb16fe96824 ]
When CONFIG_IP_MULTICAST is not set and multicast ip is added to the device
with autojoin flag or when multicast ip is deleted kernel will crash.
steps to reproduce:
ip addr add 224.0.0.0/32 dev eth0
ip addr del 224.0.0.0/32 dev eth0
or
ip addr add 224.0.0.0/32 dev eth0 autojoin
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000088
pc : _raw_write_lock_irqsave+0x1e0/0x2ac
lr : lock_sock_nested+0x1c/0x60
Call trace:
_raw_write_lock_irqsave+0x1e0/0x2ac
lock_sock_nested+0x1c/0x60
ip_mc_config.isra.28+0x50/0xe0
inet_rtm_deladdr+0x1a8/0x1f0
rtnetlink_rcv_msg+0x120/0x350
netlink_rcv_skb+0x58/0x120
rtnetlink_rcv+0x14/0x20
netlink_unicast+0x1b8/0x270
netlink_sendmsg+0x1a0/0x3b0
____sys_sendmsg+0x248/0x290
___sys_sendmsg+0x80/0xc0
__sys_sendmsg+0x68/0xc0
__arm64_sys_sendmsg+0x20/0x30
el0_svc_common.constprop.2+0x88/0x150
do_el0_svc+0x20/0x80
el0_sync_handler+0x118/0x190
el0_sync+0x140/0x180
Fixes:
93a714d6b53d ("multicast: Extend ip address command to enable multicast group join/leave on")
Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu>
Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Taehee Yoo [Tue, 7 Apr 2020 13:23:21 +0000 (13:23 +0000)]
hsr: check protocol version in hsr_newlink()
[ Upstream commit
4faab8c446def7667adf1f722456c2f4c304069c ]
In the current hsr code, only 0 and 1 protocol versions are valid.
But current hsr code doesn't check the version, which is received by
userspace.
Test commands:
ip link add dummy0 type dummy
ip link add dummy1 type dummy
ip link add hsr0 type hsr slave1 dummy0 slave2 dummy1 version 4
In the test commands, version 4 is invalid.
So, the command should be failed.
After this patch, following error will occur.
"Error: hsr: Only versions 0..1 are supported."
Fixes:
ee1c27977284 ("net/hsr: Added support for HSR v1")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Shevchenko [Wed, 26 Feb 2020 14:51:58 +0000 (16:51 +0200)]
mfd: dln2: Fix sanity checking for endpoints
[ Upstream commit
fb945c95a482200876993977008b67ea658bd938 ]
While the commit
2b8bd606b1e6 ("mfd: dln2: More sanity checking for endpoints")
tries to harden the sanity checks it made at the same time a regression,
i.e. mixed in and out endpoints. Obviously it should have been not tested on
real hardware at that time, but unluckily it didn't happen.
So, fix above mentioned typo and make device being enumerated again.
While here, introduce an enumerator for magic values to prevent similar issue
to happen in the future.
Fixes:
2b8bd606b1e6 ("mfd: dln2: More sanity checking for endpoints")
Cc: Oliver Neukum <oneukum@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nathan Chancellor [Sat, 15 Sep 2018 06:43:37 +0000 (23:43 -0700)]
misc: echo: Remove unnecessary parentheses and simplify check for zero
[ Upstream commit
85dc2c65e6c975baaf36ea30f2ccc0a36a8c8add ]
Clang warns when multiple pairs of parentheses are used for a single
conditional statement.
drivers/misc/echo/echo.c:384:27: warning: equality comparison with
extraneous parentheses [-Wparentheses-equality]
if ((ec->nonupdate_dwell == 0)) {
~~~~~~~~~~~~~~~~~~~~^~~~
drivers/misc/echo/echo.c:384:27: note: remove extraneous parentheses
around the comparison to silence this warning
if ((ec->nonupdate_dwell == 0)) {
~ ^ ~
drivers/misc/echo/echo.c:384:27: note: use '=' to turn this equality
comparison into an assignment
if ((ec->nonupdate_dwell == 0)) {
^~
=
1 warning generated.
Remove them and while we're at it, simplify the zero check as '!var' is
used more than 'var == 0'.
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Laurentiu Tudor [Thu, 23 Jan 2020 11:19:25 +0000 (11:19 +0000)]
powerpc/fsl_booke: Avoid creating duplicate tlb1 entry
[ Upstream commit
aa4113340ae6c2811e046f08c2bc21011d20a072 ]
In the current implementation, the call to loadcam_multi() is wrapped
between switch_to_as1() and restore_to_as0() calls so, when it tries
to create its own temporary AS=1 TLB1 entry, it ends up duplicating
the existing one created by switch_to_as1(). Add a check to skip
creating the temporary entry if already running in AS=1.
Fixes:
d9e1831a4202 ("powerpc/85xx: Load all early TLB entries at once")
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200123111914.2565-1-laurentiu.tudor@nxp.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wen Yang [Fri, 3 Apr 2020 09:04:08 +0000 (17:04 +0800)]
ipmi: fix hung processes in __get_guid()
[ Upstream commit
32830a0534700f86366f371b150b17f0f0d140d7 ]
The wait_event() function is used to detect command completion.
When send_guid_cmd() returns an error, smi_send() has not been
called to send data. Therefore, wait_event() should not be used
on the error path, otherwise it will cause the following warning:
[ 1361.588808] systemd-udevd D 0 1501 1436 0x00000004
[ 1361.588813]
ffff883f4b1298c0 0000000000000000 ffff883f4b188000 ffff887f7e3d9f40
[ 1361.677952]
ffff887f64bd4280 ffffc90037297a68 ffffffff8173ca3b ffffc90000000010
[ 1361.767077]
00ffc90037297ad0 ffff887f7e3d9f40 0000000000000286 ffff883f4b188000
[ 1361.856199] Call Trace:
[ 1361.885578] [<
ffffffff8173ca3b>] ? __schedule+0x23b/0x780
[ 1361.951406] [<
ffffffff8173cfb6>] schedule+0x36/0x80
[ 1362.010979] [<
ffffffffa071f178>] get_guid+0x118/0x150 [ipmi_msghandler]
[ 1362.091281] [<
ffffffff810d5350>] ? prepare_to_wait_event+0x100/0x100
[ 1362.168533] [<
ffffffffa071f755>] ipmi_register_smi+0x405/0x940 [ipmi_msghandler]
[ 1362.258337] [<
ffffffffa0230ae9>] try_smi_init+0x529/0x950 [ipmi_si]
[ 1362.334521] [<
ffffffffa022f350>] ? std_irq_setup+0xd0/0xd0 [ipmi_si]
[ 1362.411701] [<
ffffffffa0232bd2>] init_ipmi_si+0x492/0x9e0 [ipmi_si]
[ 1362.487917] [<
ffffffffa0232740>] ? ipmi_pci_probe+0x280/0x280 [ipmi_si]
[ 1362.568219] [<
ffffffff810021a0>] do_one_initcall+0x50/0x180
[ 1362.636109] [<
ffffffff812231b2>] ? kmem_cache_alloc_trace+0x142/0x190
[ 1362.714330] [<
ffffffff811b2ae1>] do_init_module+0x5f/0x200
[ 1362.781208] [<
ffffffff81123ca8>] load_module+0x1898/0x1de0
[ 1362.848069] [<
ffffffff811202e0>] ? __symbol_put+0x60/0x60
[ 1362.913886] [<
ffffffff8130696b>] ? security_kernel_post_read_file+0x6b/0x80
[ 1362.998514] [<
ffffffff81124465>] SYSC_finit_module+0xe5/0x120
[ 1363.068463] [<
ffffffff81124465>] ? SYSC_finit_module+0xe5/0x120
[ 1363.140513] [<
ffffffff811244be>] SyS_finit_module+0xe/0x10
[ 1363.207364] [<
ffffffff81003c04>] do_syscall_64+0x74/0x180
Fixes:
50c812b2b951 ("[PATCH] ipmi: add full sysfs support")
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Cc: Corey Minyard <minyard@acm.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: openipmi-developer@lists.sourceforge.net
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # 2.6.17-
Message-Id: <
20200403090408.58745-1-wenyang@linux.alibaba.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chris Wilson [Sun, 2 Feb 2020 17:16:31 +0000 (17:16 +0000)]
drm: Remove PageReserved manipulation from drm_pci_alloc
[ Upstream commit
ea36ec8623f56791c6ff6738d0509b7920f85220 ]
drm_pci_alloc/drm_pci_free are very thin wrappers around the core dma
facilities, and we have no special reason within the drm layer to behave
differently. In particular, since
commit
de09d31dd38a50fdce106c15abd68432eebbd014
Author: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Date: Fri Jan 15 16:51:42 2016 -0800
page-flags: define PG_reserved behavior on compound pages
As far as I can see there's no users of PG_reserved on compound pages.
Let's use PF_NO_COMPOUND here.
it has been illegal to combine GFP_COMP with SetPageReserved, so lets
stop doing both and leave the dma layer to its own devices.
Reported-by: Taketo Kabe
Bug: https://gitlab.freedesktop.org/drm/intel/issues/1027
Fixes:
de09d31dd38a ("page-flags: define PG_reserved behavior on compound pages")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: <stable@vger.kernel.org> # v4.5+
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200202171635.4039044-1-chris@chris-wilson.co.uk
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lyude Paul [Wed, 22 Jan 2020 19:43:20 +0000 (14:43 -0500)]
drm/dp_mst: Fix clearing payload state on topology disable
[ Upstream commit
8732fe46b20c951493bfc4dba0ad08efdf41de81 ]
The issues caused by:
commit
64e62bdf04ab ("drm/dp_mst: Remove VCPI while disabling topology
mgr")
Prompted me to take a closer look at how we clear the payload state in
general when disabling the topology, and it turns out there's actually
two subtle issues here.
The first is that we're not grabbing &mgr.payload_lock when clearing the
payloads in drm_dp_mst_topology_mgr_set_mst(). Seeing as the canonical
lock order is &mgr.payload_lock -> &mgr.lock (because we always want
&mgr.lock to be the inner-most lock so topology validation always
works), this makes perfect sense. It also means that -technically- there
could be racing between someone calling
drm_dp_mst_topology_mgr_set_mst() to disable the topology, along with a
modeset occurring that's modifying the payload state at the same time.
The second is the more obvious issue that Wayne Lin discovered, that
we're not clearing proposed_payloads when disabling the topology.
I actually can't see any obvious places where the racing caused by the
first issue would break something, and it could be that some of our
higher-level locks already prevent this by happenstance, but better safe
then sorry. So, let's make it so that drm_dp_mst_topology_mgr_set_mst()
first grabs &mgr.payload_lock followed by &mgr.lock so that we never
race when modifying the payload state. Then, we also clear
proposed_payloads to fix the original issue of enabling a new topology
with a dirty payload state. This doesn't clear any of the drm_dp_vcpi
structures, but those are getting destroyed along with the ports anyway.
Changes since v1:
* Use sizeof(mgr->payloads[0])/sizeof(mgr->proposed_vcpis[0]) instead -
vsyrjala
Cc: Sean Paul <sean@poorly.run>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200122194321.14953-1-lyude@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Filipe Manana [Fri, 28 Feb 2020 13:04:36 +0000 (13:04 +0000)]
Btrfs: fix crash during unmount due to race with delayed inode workers
[ Upstream commit
f0cc2cd70164efe8f75c5d99560f0f69969c72e4 ]
During unmount we can have a job from the delayed inode items work queue
still running, that can lead to at least two bad things:
1) A crash, because the worker can try to create a transaction just
after the fs roots were freed;
2) A transaction leak, because the worker can create a transaction
before the fs roots are freed and just after we committed the last
transaction and after we stopped the transaction kthread.
A stack trace example of the crash:
[79011.691214] kernel BUG at lib/radix-tree.c:982!
[79011.692056] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI
[79011.693180] CPU: 3 PID: 1394 Comm: kworker/u8:2 Tainted: G W 5.6.0-rc2-btrfs-next-54 #2
(...)
[79011.696789] Workqueue: btrfs-delayed-meta btrfs_work_helper [btrfs]
[79011.697904] RIP: 0010:radix_tree_tag_set+0xe7/0x170
(...)
[79011.702014] RSP: 0018:
ffffb3c84a317ca0 EFLAGS:
00010293
[79011.702949] RAX:
0000000000000000 RBX:
0000000000000000 RCX:
0000000000000000
[79011.704202] RDX:
ffffb3c84a317cb0 RSI:
ffffb3c84a317ca8 RDI:
ffff8db3931340a0
[79011.705463] RBP:
0000000000000005 R08:
0000000000000005 R09:
ffffffff974629d0
[79011.706756] R10:
ffffb3c84a317bc0 R11:
0000000000000001 R12:
ffff8db393134000
[79011.708010] R13:
ffff8db3931340a0 R14:
ffff8db393134068 R15:
0000000000000001
[79011.709270] FS:
0000000000000000(0000) GS:
ffff8db3b6a00000(0000) knlGS:
0000000000000000
[79011.710699] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[79011.711710] CR2:
00007f22c2a0a000 CR3:
0000000232ad4005 CR4:
00000000003606e0
[79011.712958] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[79011.714205] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[79011.715448] Call Trace:
[79011.715925] record_root_in_trans+0x72/0xf0 [btrfs]
[79011.716819] btrfs_record_root_in_trans+0x4b/0x70 [btrfs]
[79011.717925] start_transaction+0xdd/0x5c0 [btrfs]
[79011.718829] btrfs_async_run_delayed_root+0x17e/0x2b0 [btrfs]
[79011.719915] btrfs_work_helper+0xaa/0x720 [btrfs]
[79011.720773] process_one_work+0x26d/0x6a0
[79011.721497] worker_thread+0x4f/0x3e0
[79011.722153] ? process_one_work+0x6a0/0x6a0
[79011.722901] kthread+0x103/0x140
[79011.723481] ? kthread_create_worker_on_cpu+0x70/0x70
[79011.724379] ret_from_fork+0x3a/0x50
(...)
The following diagram shows a sequence of steps that lead to the crash
during ummount of the filesystem:
CPU 1 CPU 2 CPU 3
btrfs_punch_hole()
btrfs_btree_balance_dirty()
btrfs_balance_delayed_items()
--> sees
fs_info->delayed_root->items
with value 200, which is greater
than
BTRFS_DELAYED_BACKGROUND (128)
and smaller than
BTRFS_DELAYED_WRITEBACK (512)
btrfs_wq_run_delayed_node()
--> queues a job for
fs_info->delayed_workers to run
btrfs_async_run_delayed_root()
btrfs_async_run_delayed_root()
--> job queued by CPU 1
--> starts picking and running
delayed nodes from the
prepare_list list
close_ctree()
btrfs_delete_unused_bgs()
btrfs_commit_super()
btrfs_join_transaction()
--> gets transaction N
btrfs_commit_transaction(N)
--> set transaction state
to TRANTS_STATE_COMMIT_START
btrfs_first_prepared_delayed_node()
--> picks delayed node X through
the prepared_list list
btrfs_run_delayed_items()
btrfs_first_delayed_node()
--> also picks delayed node X
but through the node_list
list
__btrfs_commit_inode_delayed_items()
--> runs all delayed items from
this node and drops the
node's item count to 0
through call to
btrfs_release_delayed_inode()
--> finishes running any remaining
delayed nodes
--> finishes transaction commit
--> stops cleaner and transaction threads
btrfs_free_fs_roots()
--> frees all roots and removes them
from the radix tree
fs_info->fs_roots_radix
btrfs_join_transaction()
start_transaction()
btrfs_record_root_in_trans()
record_root_in_trans()
radix_tree_tag_set()
--> crashes because
the root is not in
the radix tree
anymore
If the worker is able to call btrfs_join_transaction() before the unmount
task frees the fs roots, we end up leaking a transaction and all its
resources, since after the call to btrfs_commit_super() and stopping the
transaction kthread, we don't expect to have any transaction open anymore.
When this situation happens the worker has a delayed node that has no
more items to run, since the task calling btrfs_run_delayed_items(),
which is doing a transaction commit, picks the same node and runs all
its items first.
We can not wait for the worker to complete when running delayed items
through btrfs_run_delayed_items(), because we call that function in
several phases of a transaction commit, and that could cause a deadlock
because the worker calls btrfs_join_transaction() and the task doing the
transaction commit may have already set the transaction state to
TRANS_STATE_COMMIT_DOING.
Also it's not possible to get into a situation where only some of the
items of a delayed node are added to the fs/subvolume tree in the current
transaction and the remaining ones in the next transaction, because when
running the items of a delayed inode we lock its mutex, effectively
waiting for the worker if the worker is running the items of the delayed
node already.
Since this can only cause issues when unmounting a filesystem, fix it in
a simple way by waiting for any jobs on the delayed workers queue before
calling btrfs_commit_supper() at close_ctree(). This works because at this
point no one can call btrfs_btree_balance_dirty() or
btrfs_balance_delayed_items(), and if we end up waiting for any worker to
complete, btrfs_commit_super() will commit the transaction created by the
worker.
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michael Ellerman [Tue, 31 Mar 2020 11:47:19 +0000 (22:47 +1100)]
powerpc/64/tm: Don't let userspace set regs->trap via sigreturn
commit
c7def7fbdeaa25feaa19caf4a27c5d10bd8789e4 upstream.
In restore_tm_sigcontexts() we take the trap value directly from the
user sigcontext with no checking:
err |= __get_user(regs->trap, &sc->gp_regs[PT_TRAP]);
This means we can be in the kernel with an arbitrary regs->trap value.
Although that's not immediately problematic, there is a risk we could
trigger one of the uses of CHECK_FULL_REGS():
#define CHECK_FULL_REGS(regs) BUG_ON(regs->trap & 1)
It can also cause us to unnecessarily save non-volatile GPRs again in
save_nvgprs(), which shouldn't be problematic but is still wrong.
It's also possible it could trick the syscall restart machinery, which
relies on regs->trap not being == 0xc00 (see
9a81c16b5275 ("powerpc:
fix double syscall restarts")), though I haven't been able to make
that happen.
Finally it doesn't match the behaviour of the non-TM case, in
restore_sigcontext() which zeroes regs->trap.
So change restore_tm_sigcontexts() to zero regs->trap.
This was discovered while testing Nick's upcoming rewrite of the
syscall entry path. In that series the call to save_nvgprs() prior to
signal handling (do_notify_resume()) is removed, which leaves the
low-bit of regs->trap uncleared which can then trigger the FULL_REGS()
WARNs in setup_tm_sigcontexts().
Fixes:
2b0a576d15e0 ("powerpc: Add new transactional memory state to the signal context")
Cc: stable@vger.kernel.org # v3.9+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200401023836.3286664-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kai-Heng Feng [Wed, 27 Mar 2019 09:02:54 +0000 (17:02 +0800)]
libata: Return correct status in sata_pmp_eh_recover_pm() when ATA_DFLAG_DETACH is set
commit
8305f72f952cff21ce8109dc1ea4b321c8efc5af upstream.
During system resume from suspend, this can be observed on ASM1062 PMP
controller:
ata10.01: SATA link down (SStatus 0 SControl 330)
ata10.02: hard resetting link
ata10.02: SATA link down (SStatus 0 SControl 330)
ata10.00: configured for UDMA/133
Kernel panic - not syncing: stack-protector: Kernel
in: sata_pmp_eh_recover+0xa2b/0xa40
CPU: 2 PID: 230 Comm: scsi_eh_9 Tainted: P OE
#49-Ubuntu
Hardware name: System manufacturer System Product
1001 12/10/2017
Call Trace:
dump_stack+0x63/0x8b
panic+0xe4/0x244
? sata_pmp_eh_recover+0xa2b/0xa40
__stack_chk_fail+0x19/0x20
sata_pmp_eh_recover+0xa2b/0xa40
? ahci_do_softreset+0x260/0x260 [libahci]
? ahci_do_hardreset+0x140/0x140 [libahci]
? ata_phys_link_offline+0x60/0x60
? ahci_stop_engine+0xc0/0xc0 [libahci]
sata_pmp_error_handler+0x22/0x30
ahci_error_handler+0x45/0x80 [libahci]
ata_scsi_port_error_handler+0x29b/0x770
? ata_scsi_cmd_error_handler+0x101/0x140
ata_scsi_error+0x95/0xd0
? scsi_try_target_reset+0x90/0x90
scsi_error_handler+0xd0/0x5b0
kthread+0x121/0x140
? scsi_eh_get_sense+0x200/0x200
? kthread_create_worker_on_cpu+0x70/0x70
ret_from_fork+0x22/0x40
Kernel Offset: 0xcc00000 from 0xffffffff81000000
(relocation range: 0xffffffff80000000-0xffffffffbfffffff)
Since sata_pmp_eh_recover_pmp() doens't set rc when ATA_DFLAG_DETACH is
set, sata_pmp_eh_recover() continues to run. During retry it triggers
the stack protector.
Set correct rc in sata_pmp_eh_recover_pmp() to let sata_pmp_eh_recover()
jump to pmp_fail directly.
BugLink: https://bugs.launchpad.net/bugs/1821434
Cc: stable@vger.kernel.org
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simon Gander [Fri, 10 Apr 2020 21:32:16 +0000 (14:32 -0700)]
hfsplus: fix crash and filesystem corruption when deleting files
commit
25efb2ffdf991177e740b2f63e92b4ec7d310a92 upstream.
When removing files containing extended attributes, the hfsplus driver may
remove the wrong entries from the attributes b-tree, causing major
filesystem damage and in some cases even kernel crashes.
To remove a file, all its extended attributes have to be removed as well.
The driver does this by looking up all keys in the attributes b-tree with
the cnid of the file. Each of these entries then gets deleted using the
key used for searching, which doesn't contain the attribute's name when it
should. Since the key doesn't contain the name, the deletion routine will
not find the correct entry and instead remove the one in front of it. If
parent nodes have to be modified, these become corrupt as well. This
causes invalid links and unsorted entries that not even macOS's fsck_hfs
is able to fix.
To fix this, modify the search key before an entry is deleted from the
attributes b-tree by copying the found entry's key into the search key,
therefore ensuring that the correct entry gets removed from the tree.
Signed-off-by: Simon Gander <simon@tuxera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Anton Altaparmakov <anton@tuxera.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200327155541.1521-1-simon@tuxera.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oliver O'Halloran [Thu, 6 Feb 2020 06:26:21 +0000 (17:26 +1100)]
cpufreq: powernv: Fix use-after-free
commit
d0a72efac89d1c35ac55197895201b7b94c5e6ef upstream.
The cpufreq driver has a use-after-free that we can hit if:
a) There's an OCC message pending when the notifier is registered, and
b) The cpufreq driver fails to register with the core.
When a) occurs the notifier schedules a workqueue item to handle the
message. The backing work_struct is located on chips[].throttle and
when b) happens we clean up by freeing the array. Once we get to
the (now free) queued item and the kernel crashes.
Fixes:
c5e29ea7ac14 ("cpufreq: powernv: Fix bugs in powernv_cpufreq_{init/exit}")
Cc: stable@vger.kernel.org # v4.6+
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200206062622.28235-1-oohall@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Biggers [Fri, 10 Apr 2020 21:33:43 +0000 (14:33 -0700)]
kmod: make request_module() return an error when autoloading is disabled
commit
d7d27cfc5cf0766a26a8f56868c5ad5434735126 upstream.
Patch series "module autoloading fixes and cleanups", v5.
This series fixes a bug where request_module() was reporting success to
kernel code when module autoloading had been completely disabled via
'echo > /proc/sys/kernel/modprobe'.
It also addresses the issues raised on the original thread
(https://lkml.kernel.org/lkml/
20200310223731.126894-1-ebiggers@kernel.org/T/#u)
bydocumenting the modprobe sysctl, adding a self-test for the empty path
case, and downgrading a user-reachable WARN_ONCE().
This patch (of 4):
It's long been possible to disable kernel module autoloading completely
(while still allowing manual module insertion) by setting
/proc/sys/kernel/modprobe to the empty string.
This can be preferable to setting it to a nonexistent file since it
avoids the overhead of an attempted execve(), avoids potential
deadlocks, and avoids the call to security_kernel_module_request() and
thus on SELinux-based systems eliminates the need to write SELinux rules
to dontaudit module_request.
However, when module autoloading is disabled in this way,
request_module() returns 0. This is broken because callers expect 0 to
mean that the module was successfully loaded.
Apparently this was never noticed because this method of disabling
module autoloading isn't used much, and also most callers don't use the
return value of request_module() since it's always necessary to check
whether the module registered its functionality or not anyway.
But improperly returning 0 can indeed confuse a few callers, for example
get_fs_type() in fs/filesystems.c where it causes a WARNING to be hit:
if (!fs && (request_module("fs-%.*s", len, name) == 0)) {
fs = __get_fs_type(name, len);
WARN_ONCE(!fs, "request_module fs-%.*s succeeded, but still no fs?\n", len, name);
}
This is easily reproduced with:
echo > /proc/sys/kernel/modprobe
mount -t NONEXISTENT none /
It causes:
request_module fs-NONEXISTENT succeeded, but still no fs?
WARNING: CPU: 1 PID: 1106 at fs/filesystems.c:275 get_fs_type+0xd6/0xf0
[...]
This should actually use pr_warn_once() rather than WARN_ONCE(), since
it's also user-reachable if userspace immediately unloads the module.
Regardless, request_module() should correctly return an error when it
fails. So let's make it return -ENOENT, which matches the error when
the modprobe binary doesn't exist.
I've also sent patches to document and test this case.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Jessica Yu <jeyu@kernel.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Ben Hutchings <benh@debian.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200310223731.126894-1-ebiggers@kernel.org
Link: http://lkml.kernel.org/r/20200312202552.241885-1-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Wed, 1 Apr 2020 20:23:06 +0000 (13:23 -0700)]
Input: i8042 - add Acer Aspire 5738z to nomux list
commit
ebc68cedec4aead47d8d11623d013cca9bf8e825 upstream.
The Acer Aspire 5738z has a button to disable (and re-enable) the
touchpad next to the touchpad.
When this button is pressed a LED underneath indicates that the touchpad
is disabled (and an event is send to userspace and GNOME shows its
touchpad enabled / disable OSD thingie).
So far so good, but after re-enabling the touchpad it no longer works.
The laptop does not have an external ps2 port, so mux mode is not needed
and disabling mux mode fixes the touchpad no longer working after toggling
it off and back on again, so lets add this laptop model to the nomux list.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200331123947.318908-1-hdegoede@redhat.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Mueller [Tue, 3 Mar 2020 15:42:01 +0000 (16:42 +0100)]
s390/diag: fix display of diagnose call statistics
commit
6c7c851f1b666a8a455678a0b480b9162de86052 upstream.
Show the full diag statistic table and not just parts of it.
The issue surfaced in a KVM guest with a number of vcpus
defined smaller than NR_DIAG_STAT.
Fixes:
1ec2772e0c3c ("s390/diag: add a statistic for diagnose calls")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Mueller <mimu@linux.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changwei Ge [Fri, 10 Apr 2020 21:32:38 +0000 (14:32 -0700)]
ocfs2: no need try to truncate file beyond i_size
commit
783fda856e1034dee90a873f7654c418212d12d7 upstream.
Linux fallocate(2) with FALLOC_FL_PUNCH_HOLE mode set, its offset can
exceed the inode size. Ocfs2 now doesn't allow that offset beyond inode
size. This restriction is not necessary and violates fallocate(2)
semantics.
If fallocate(2) offset is beyond inode size, just return success and do
nothing further.
Otherwise, ocfs2 will crash the kernel.
kernel BUG at fs/ocfs2//alloc.c:7264!
ocfs2_truncate_inline+0x20f/0x360 [ocfs2]
ocfs2_remove_inode_range+0x23c/0xcb0 [ocfs2]
__ocfs2_change_file_space+0x4a5/0x650 [ocfs2]
ocfs2_fallocate+0x83/0xa0 [ocfs2]
vfs_fallocate+0x148/0x230
SyS_fallocate+0x48/0x80
do_syscall_64+0x79/0x170
Signed-off-by: Changwei Ge <chge@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200407082754.17565-1-chge@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Qian Cai [Sat, 22 Feb 2020 04:32:58 +0000 (23:32 -0500)]
ext4: fix a data race at inode->i_blocks
commit
28936b62e71e41600bab319f262ea9f9b1027629 upstream.
inode->i_blocks could be accessed concurrently as noticed by KCSAN,
BUG: KCSAN: data-race in ext4_do_update_inode [ext4] / inode_add_bytes
write to 0xffff9a00d4b982d0 of 8 bytes by task 22100 on cpu 118:
inode_add_bytes+0x65/0xf0
__inode_add_bytes at fs/stat.c:689
(inlined by) inode_add_bytes at fs/stat.c:702
ext4_mb_new_blocks+0x418/0xca0 [ext4]
ext4_ext_map_blocks+0x1a6b/0x27b0 [ext4]
ext4_map_blocks+0x1a9/0x950 [ext4]
_ext4_get_block+0xfc/0x270 [ext4]
ext4_get_block_unwritten+0x33/0x50 [ext4]
__block_write_begin_int+0x22e/0xae0
__block_write_begin+0x39/0x50
ext4_write_begin+0x388/0xb50 [ext4]
ext4_da_write_begin+0x35f/0x8f0 [ext4]
generic_perform_write+0x15d/0x290
ext4_buffered_write_iter+0x11f/0x210 [ext4]
ext4_file_write_iter+0xce/0x9e0 [ext4]
new_sync_write+0x29c/0x3b0
__vfs_write+0x92/0xa0
vfs_write+0x103/0x260
ksys_write+0x9d/0x130
__x64_sys_write+0x4c/0x60
do_syscall_64+0x91/0xb05
entry_SYSCALL_64_after_hwframe+0x49/0xbe
read to 0xffff9a00d4b982d0 of 8 bytes by task 8 on cpu 65:
ext4_do_update_inode+0x4a0/0xf60 [ext4]
ext4_inode_blocks_set at fs/ext4/inode.c:4815
ext4_mark_iloc_dirty+0xaf/0x160 [ext4]
ext4_mark_inode_dirty+0x129/0x3e0 [ext4]
ext4_convert_unwritten_extents+0x253/0x2d0 [ext4]
ext4_convert_unwritten_io_end_vec+0xc5/0x150 [ext4]
ext4_end_io_rsv_work+0x22c/0x350 [ext4]
process_one_work+0x54f/0xb90
worker_thread+0x80/0x5f0
kthread+0x1cd/0x1f0
ret_from_fork+0x27/0x50
4 locks held by kworker/u256:0/8:
#0:
ffff9a025abc4328 ((wq_completion)ext4-rsv-conversion){+.+.}, at: process_one_work+0x443/0xb90
#1:
ffffab5a862dbe20 ((work_completion)(&ei->i_rsv_conversion_work)){+.+.}, at: process_one_work+0x443/0xb90
#2:
ffff9a025a9d0f58 (jbd2_handle){++++}, at: start_this_handle+0x1c1/0x9d0 [jbd2]
#3:
ffff9a00d4b985d8 (&(&ei->i_raw_lock)->rlock){+.+.}, at: ext4_do_update_inode+0xaa/0xf60 [ext4]
irq event stamp:
3009267
hardirqs last enabled at (
3009267): [<
ffffffff980da9b7>] __find_get_block+0x107/0x790
hardirqs last disabled at (
3009266): [<
ffffffff980da8f9>] __find_get_block+0x49/0x790
softirqs last enabled at (
3009230): [<
ffffffff98a0034c>] __do_softirq+0x34c/0x57c
softirqs last disabled at (
3009223): [<
ffffffff97cc67a2>] irq_exit+0xa2/0xc0
Reported by Kernel Concurrency Sanitizer on:
CPU: 65 PID: 8 Comm: kworker/u256:0 Tainted: G L 5.6.0-rc2-next-
20200221+ #7
Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019
Workqueue: ext4-rsv-conversion ext4_end_io_rsv_work [ext4]
The plain read is outside of inode->i_lock critical section which
results in a data race. Fix it by adding READ_ONCE() there.
Link: https://lore.kernel.org/r/20200222043258.2279-1-cai@lca.pw
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nathan Chancellor [Thu, 1 Nov 2018 00:55:02 +0000 (17:55 -0700)]
rtc: omap: Use define directive for PIN_CONFIG_ACTIVE_HIGH
commit
c50156526a2f7176b50134e3e5fb108ba09791b2 upstream.
Clang warns when one enumerated type is implicitly converted to another:
drivers/rtc/rtc-omap.c:574:21: warning: implicit conversion from
enumeration type 'enum rtc_pin_config_param' to different enumeration
type 'enum pin_config_param' [-Wenum-conversion]
{"ti,active-high", PIN_CONFIG_ACTIVE_HIGH, 0},
~ ^~~~~~~~~~~~~~~~~~~~~~
drivers/rtc/rtc-omap.c:579:12: warning: implicit conversion from
enumeration type 'enum rtc_pin_config_param' to different enumeration
type 'enum pin_config_param' [-Wenum-conversion]
PCONFDUMP(PIN_CONFIG_ACTIVE_HIGH, "input active high", NULL, false),
~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/pinctrl/pinconf-generic.h:163:11: note: expanded from
macro 'PCONFDUMP'
.param = a, .display = b, .format = c, .has_arg = d \
^
2 warnings generated.
It is expected that pinctrl drivers can extend pin_config_param because
of the gap between PIN_CONFIG_END and PIN_CONFIG_MAX so this conversion
isn't an issue. Most drivers that take advantage of this define the
PIN_CONFIG variables as constants, rather than enumerated values. Do the
same thing here so that Clang no longer warns.
Link: https://github.com/ClangBuiltLinux/linux/issues/144
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fredrik Strupe [Wed, 8 Apr 2020 11:29:41 +0000 (13:29 +0200)]
arm64: armv8_deprecated: Fix undef_hook mask for thumb setend
commit
fc2266011accd5aeb8ebc335c381991f20e26e33 upstream.
For thumb instructions, call_undef_hook() in traps.c first reads a u16,
and if the u16 indicates a T32 instruction (u16 >= 0xe800), a second
u16 is read, which then makes up the the lower half-word of a T32
instruction. For T16 instructions, the second u16 is not read,
which makes the resulting u32 opcode always have the upper half set to
0.
However, having the upper half of instr_mask in the undef_hook set to 0
masks out the upper half of all thumb instructions - both T16 and T32.
This results in trapped T32 instructions with the lower half-word equal
to the T16 encoding of setend (b650) being matched, even though the upper
half-word is not 0000 and thus indicates a T32 opcode.
An example of such a T32 instruction is
eaa0b650, which should raise a
SIGILL since T32 instructions with an eaa prefix are unallocated as per
Arm ARM, but instead works as a SETEND because the second half-word is set
to b650.
This patch fixes the issue by extending instr_mask to include the
upper u32 half, which will still match T16 instructions where the upper
half is 0, but not T32 instructions.
Fixes:
2d888f48e056 ("arm64: Emulate SETEND for AArch32 tasks")
Cc: <stable@vger.kernel.org> # 4.0.x-
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Fredrik Strupe <fredrik@strupe.net>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steffen Maier [Thu, 12 Mar 2020 17:44:56 +0000 (18:44 +0100)]
scsi: zfcp: fix missing erp_lock in port recovery trigger for point-to-point
commit
819732be9fea728623e1ed84eba28def7384ad1f upstream.
v2.6.27 commit
cc8c282963bd ("[SCSI] zfcp: Automatically attach remote
ports") introduced zfcp automatic port scan.
Before that, the user had to use the sysfs attribute "port_add" of an FCP
device (adapter) to add and open remote (target) ports, even for the remote
peer port in point-to-point topology. That code path did a proper port open
recovery trigger taking the erp_lock.
Since above commit, a new helper function zfcp_erp_open_ptp_port()
performed an UNlocked port open recovery trigger. This can race with other
parallel recovery triggers. In zfcp_erp_action_enqueue() this could corrupt
e.g. adapter->erp_total_count or adapter->erp_ready_head.
As already found for fabric topology in v4.17 commit
fa89adba1941 ("scsi:
zfcp: fix infinite iteration on ERP ready list"), there was an endless loop
during tracing of rport (un)block. A subsequent v4.18 commit
9e156c54ace3
("scsi: zfcp: assert that the ERP lock is held when tracing a recovery
trigger") introduced a lockdep assertion for that case.
As a side effect, that lockdep assertion now uncovered the unlocked code
path for PtP. It is from within an adapter ERP action:
zfcp_erp_strategy[1479] intentionally DROPs erp lock around
zfcp_erp_strategy_do_action()
zfcp_erp_strategy_do_action[1441] NO erp lock
zfcp_erp_adapter_strategy[876] NO erp lock
zfcp_erp_adapter_strategy_open[855] NO erp lock
zfcp_erp_adapter_strategy_open_fsf[806]NO erp lock
zfcp_erp_adapter_strat_fsf_xconf[772] erp lock only around
zfcp_erp_action_to_running(),
BUT *_not_* around
zfcp_erp_enqueue_ptp_port()
zfcp_erp_enqueue_ptp_port[728] BUG: *_not_* taking erp lock
_zfcp_erp_port_reopen[432] assumes to be called with erp lock
zfcp_erp_action_enqueue[314] assumes to be called with erp lock
zfcp_dbf_rec_trig[288] _checks_ to be called with erp lock:
lockdep_assert_held(&adapter->erp_lock);
It causes the following lockdep warning:
WARNING: CPU: 2 PID: 775 at drivers/s390/scsi/zfcp_dbf.c:288
zfcp_dbf_rec_trig+0x16a/0x188
no locks held by zfcperp0.0.17c0/775.
Fix this by using the proper locked recovery trigger helper function.
Link: https://lore.kernel.org/r/20200312174505.51294-2-maier@linux.ibm.com
Fixes:
cc8c282963bd ("[SCSI] zfcp: Automatically attach remote ports")
Cc: <stable@vger.kernel.org> #v2.6.27+
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shetty, Harshini X (EXT-Sony Mobile) [Tue, 17 Mar 2020 09:15:45 +0000 (09:15 +0000)]
dm verity fec: fix memory leak in verity_fec_dtr
commit
75fa601934fda23d2f15bf44b09c2401942d8e15 upstream.
Fix below kmemleak detected in verity_fec_ctr. output_pool is
allocated for each dm-verity-fec device. But it is not freed when
dm-table for the verity target is removed. Hence free the output
mempool in destructor function verity_fec_dtr.
unreferenced object 0xffffffffa574d000 (size 4096):
comm "init", pid 1667, jiffies
4294894890 (age 307.168s)
hex dump (first 32 bytes):
8e 36 00 98 66 a8 0b 9b 00 00 00 00 00 00 00 00 .6..f...........
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<
0000000060e82407>] __kmalloc+0x2b4/0x340
[<
00000000dd99488f>] mempool_kmalloc+0x18/0x20
[<
000000002560172b>] mempool_init_node+0x98/0x118
[<
000000006c3574d2>] mempool_init+0x14/0x20
[<
0000000008cb266e>] verity_fec_ctr+0x388/0x3b0
[<
000000000887261b>] verity_ctr+0x87c/0x8d0
[<
000000002b1e1c62>] dm_table_add_target+0x174/0x348
[<
000000002ad89eda>] table_load+0xe4/0x328
[<
000000001f06f5e9>] dm_ctl_ioctl+0x3b4/0x5a0
[<
00000000bee5fbb7>] do_vfs_ioctl+0x5dc/0x928
[<
00000000b475b8f5>] __arm64_sys_ioctl+0x70/0x98
[<
000000005361e2e8>] el0_svc_common+0xa0/0x158
[<
000000001374818f>] el0_svc_handler+0x6c/0x88
[<
000000003364e9f4>] el0_svc+0x8/0xc
[<
000000009d84cec9>] 0xffffffffffffffff
Fixes:
a739ff3f543af ("dm verity: add support for forward error correction")
Depends-on:
6f1c819c219f7 ("dm: convert to bioset_init()/mempool_init()")
Cc: stable@vger.kernel.org
Signed-off-by: Harshini Shetty <harshini.x.shetty@sony.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Duyck [Fri, 15 Feb 2019 22:44:12 +0000 (14:44 -0800)]
mm: Use fixed constant in page_frag_alloc instead of size + 1
commit
8644772637deb121f7ac2df690cbf83fa63d3b70 upstream.
This patch replaces the size + 1 value introduced with the recent fix for 1
byte allocs with a constant value.
The idea here is to reduce code overhead as the previous logic would have
to read size into a register, then increment it, and write it back to
whatever field was being used. By using a constant we can avoid those
memory reads and arithmetic operations in favor of just encoding the
maximum value into the operation itself.
Fixes:
2c2ade81741c ("mm: page_alloc: fix ref bias in page_frag_alloc() for 1-byte allocs")
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anssi Hannula [Wed, 25 Mar 2020 10:31:54 +0000 (12:31 +0200)]
tools: gpio: Fix out-of-tree build regression
commit
82f04bfe2aff428b063eefd234679b2d693228ed upstream.
Commit
0161a94e2d1c7 ("tools: gpio: Correctly add make dependencies for
gpio_utils") added a make rule for gpio-utils-in.o but used $(output)
instead of the correct $(OUTPUT) for the output directory, breaking
out-of-tree build (O=xx) with the following error:
No rule to make target 'out/tools/gpio/gpio-utils-in.o', needed by 'out/tools/gpio/lsgpio-in.o'. Stop.
Fix that.
Fixes:
0161a94e2d1c ("tools: gpio: Correctly add make dependencies for gpio_utils")
Cc: <stable@vger.kernel.org>
Cc: Laura Abbott <labbott@redhat.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Link: https://lore.kernel.org/r/20200325103154.32235-1-anssi.hannula@bitwise.fi
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhenzhong Duan [Thu, 17 Jan 2019 10:10:59 +0000 (02:10 -0800)]
x86/speculation: Remove redundant arch_smt_update() invocation
commit
34d66caf251df91ff27b24a3a786810d29989eca upstream.
With commit
a74cfffb03b7 ("x86/speculation: Rework SMT state change"),
arch_smt_update() is invoked from each individual CPU hotplug function.
Therefore the extra arch_smt_update() call in the sysfs SMT control is
redundant.
Fixes:
a74cfffb03b7 ("x86/speculation: Rework SMT state change")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <konrad.wilk@oracle.com>
Cc: <dwmw@amazon.co.uk>
Cc: <bp@suse.de>
Cc: <srinivas.eeda@oracle.com>
Cc: <peterz@infradead.org>
Cc: <hpa@zytor.com>
Link: https://lkml.kernel.org/r/e2e064f2-e8ef-42ca-bf4f-76b612964752@default
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Sat, 13 Apr 2019 08:04:49 +0000 (10:04 +0200)]
ALSA: hda: Initialize power_state field properly
commit
183ab39eb0ea9879bb68422a83e65f750f3192f0 upstream.
The recent commit
98081ca62cba ("ALSA: hda - Record the current power
state before suspend/resume calls") made the HD-audio driver to store
the PM state in power_state field. This forgot, however, the
initialization at power up. Although the codec drivers usually don't
need to refer to this field in the normal operation, let's initialize
it properly for consistency.
Fixes:
98081ca62cba ("ALSA: hda - Record the current power state before suspend/resume calls")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rosioru Dragos [Tue, 25 Feb 2020 15:05:52 +0000 (17:05 +0200)]
crypto: mxs-dcp - fix scatterlist linearization for hash
commit
fa03481b6e2e82355c46644147b614f18c7a8161 upstream.
The incorrect traversal of the scatterlist, during the linearization phase
lead to computing the hash value of the wrong input buffer.
New implementation uses scatterwalk_map_and_copy()
to address this issue.
Cc: <stable@vger.kernel.org>
Fixes:
15b59e7c3733 ("crypto: mxs - Add Freescale MXS DCP driver")
Signed-off-by: Rosioru Dragos <dragos.rosioru@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Josef Bacik [Wed, 4 Mar 2020 16:18:23 +0000 (11:18 -0500)]
btrfs: drop block from cache on error in relocation
commit
8e19c9732ad1d127b5575a10f4fbcacf740500ff upstream.
If we have an error while building the backref tree in relocation we'll
process all the pending edges and then free the node. However if we
integrated some edges into the cache we'll lose our link to those edges
by simply freeing this node, which means we'll leak memory and
references to any roots that we've found.
Instead we need to use remove_backref_node(), which walks through all of
the edges that are still linked to this node and free's them up and
drops any root references we may be holding.
CC: stable@vger.kernel.org # 4.9+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vitaly Kuznetsov [Wed, 1 Apr 2020 08:13:48 +0000 (10:13 +0200)]
KVM: VMX: fix crash cleanup when KVM wasn't used
commit
dbef2808af6c594922fe32833b30f55f35e9da6d upstream.
If KVM wasn't used at all before we crash the cleanup procedure fails with
BUG: unable to handle page fault for address:
ffffffffffffffc8
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD
23215067 P4D
23215067 PUD
23217067 PMD 0
Oops: 0000 [#8] SMP PTI
CPU: 0 PID: 3542 Comm: bash Kdump: loaded Tainted: G D 5.6.0-rc2+ #823
RIP: 0010:crash_vmclear_local_loaded_vmcss.cold+0x19/0x51 [kvm_intel]
The root cause is that loaded_vmcss_on_cpu list is not yet initialized,
we initialize it in hardware_enable() but this only happens when we start
a VM.
Previously, we used to have a bitmap with enabled CPUs and that was
preventing [masking] the issue.
Initialized loaded_vmcss_on_cpu list earlier, right before we assign
crash_vmclear_loaded_vmcss pointer. blocked_vcpu_on_cpu list and
blocked_vcpu_on_cpu_lock are moved altogether for consistency.
Fixes:
31603d4fc2bb ("KVM: VMX: Always VMCLEAR in-use VMCSes during crash with kexec support")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <
20200401081348.
1345307-1-vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sean Christopherson [Sat, 21 Mar 2020 19:37:49 +0000 (12:37 -0700)]
KVM: VMX: Always VMCLEAR in-use VMCSes during crash with kexec support
commit
31603d4fc2bb4f0815245d496cb970b27b4f636a upstream.
VMCLEAR all in-use VMCSes during a crash, even if kdump's NMI shootdown
interrupted a KVM update of the percpu in-use VMCS list.
Because NMIs are not blocked by disabling IRQs, it's possible that
crash_vmclear_local_loaded_vmcss() could be called while the percpu list
of VMCSes is being modified, e.g. in the middle of list_add() in
vmx_vcpu_load_vmcs(). This potential corner case was called out in the
original commit[*], but the analysis of its impact was wrong.
Skipping the VMCLEARs is wrong because it all but guarantees that a
loaded, and therefore cached, VMCS will live across kexec and corrupt
memory in the new kernel. Corruption will occur because the CPU's VMCS
cache is non-coherent, i.e. not snooped, and so the writeback of VMCS
memory on its eviction will overwrite random memory in the new kernel.
The VMCS will live because the NMI shootdown also disables VMX, i.e. the
in-progress VMCLEAR will #UD, and existing Intel CPUs do not flush the
VMCS cache on VMXOFF.
Furthermore, interrupting list_add() and list_del() is safe due to
crash_vmclear_local_loaded_vmcss() using forward iteration. list_add()
ensures the new entry is not visible to forward iteration unless the
entire add completes, via WRITE_ONCE(prev->next, new). A bad "prev"
pointer could be observed if the NMI shootdown interrupted list_del() or
list_add(), but list_for_each_entry() does not consume ->prev.
In addition to removing the temporary disabling of VMCLEAR, open code
loaded_vmcs_init() in __loaded_vmcs_clear() and reorder VMCLEAR so that
the VMCS is deleted from the list only after it's been VMCLEAR'd.
Deleting the VMCS before VMCLEAR would allow a race where the NMI
shootdown could arrive between list_del() and vmcs_clear() and thus
neither flow would execute a successful VMCLEAR. Alternatively, more
code could be moved into loaded_vmcs_init(), but that gets rather silly
as the only other user, alloc_loaded_vmcs(), doesn't need the smp_wmb()
and would need to work around the list_del().
Update the smp_*() comments related to the list manipulation, and
opportunistically reword them to improve clarity.
[*] https://patchwork.kernel.org/patch/
1675731/#
3720461
Fixes:
8f536b7697a0 ("KVM: VMX: provide the vmclear function and a bitmap to support VMCLEAR in kdump")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <
20200321193751.24985-2-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sean Christopherson [Tue, 18 Feb 2020 21:07:15 +0000 (13:07 -0800)]
KVM: x86: Allocate new rmap and large page tracking when moving memslot
commit
edd4fa37baa6ee8e44dc65523b27bd6fe44c94de upstream.
Reallocate a rmap array and recalcuate large page compatibility when
moving an existing memslot to correctly handle the alignment properties
of the new memslot. The number of rmap entries required at each level
is dependent on the alignment of the memslot's base gfn with respect to
that level, e.g. moving a large-page aligned memslot so that it becomes
unaligned will increase the number of rmap entries needed at the now
unaligned level.
Not updating the rmap array is the most obvious bug, as KVM accesses
garbage data beyond the end of the rmap. KVM interprets the bad data as
pointers, leading to non-canonical #GPs, unexpected #PFs, etc...
general protection fault: 0000 [#1] SMP
CPU: 0 PID: 1909 Comm: move_memory_reg Not tainted 5.4.0-rc7+ #139
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:rmap_get_first+0x37/0x50 [kvm]
Code: <48> 8b 3b 48 85 ff 74 ec e8 6c f4 ff ff 85 c0 74 e3 48 89 d8 5b c3
RSP: 0018:
ffffc9000021bbc8 EFLAGS:
00010246
RAX:
ffff00617461642e RBX:
ffff00617461642e RCX:
0000000000000012
RDX:
ffff88827400f568 RSI:
ffffc9000021bbe0 RDI:
ffff88827400f570
RBP:
0010000000000000 R08:
ffffc9000021bd00 R09:
ffffc9000021bda8
R10:
ffffc9000021bc48 R11:
0000000000000000 R12:
0030000000000000
R13:
0000000000000000 R14:
ffff88827427d700 R15:
ffffc9000021bce8
FS:
00007f7eda014700(0000) GS:
ffff888277a00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007f7ed9216ff8 CR3:
0000000274391003 CR4:
0000000000162eb0
Call Trace:
kvm_mmu_slot_set_dirty+0xa1/0x150 [kvm]
__kvm_set_memory_region.part.64+0x559/0x960 [kvm]
kvm_set_memory_region+0x45/0x60 [kvm]
kvm_vm_ioctl+0x30f/0x920 [kvm]
do_vfs_ioctl+0xa1/0x620
ksys_ioctl+0x66/0x70
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x4c/0x170
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f7ed9911f47
Code: <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 21 6f 2c 00 f7 d8 64 89 01 48
RSP: 002b:
00007ffc00937498 EFLAGS:
00000246 ORIG_RAX:
0000000000000010
RAX:
ffffffffffffffda RBX:
0000000001ab0010 RCX:
00007f7ed9911f47
RDX:
0000000001ab1350 RSI:
000000004020ae46 RDI:
0000000000000004
RBP:
000000000000000a R08:
0000000000000000 R09:
00007f7ed9214700
R10:
00007f7ed92149d0 R11:
0000000000000246 R12:
00000000bffff000
R13:
0000000000000003 R14:
00007f7ed9215000 R15:
0000000000000000
Modules linked in: kvm_intel kvm irqbypass
---[ end trace
0c5f570b3358ca89 ]---
The disallow_lpage tracking is more subtle. Failure to update results
in KVM creating large pages when it shouldn't, either due to stale data
or again due to indexing beyond the end of the metadata arrays, which
can lead to memory corruption and/or leaking data to guest/userspace.
Note, the arrays for the old memslot are freed by the unconditional call
to kvm_free_memslot() in __kvm_set_memory_region().
Fixes:
05da45583de9b ("KVM: MMU: large page support")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Hildenbrand [Fri, 3 Apr 2020 15:30:47 +0000 (17:30 +0200)]
KVM: s390: vsie: Fix delivery of addressing exceptions
commit
4d4cee96fb7a3cc53702a9be8299bf525be4ee98 upstream.
Whenever we get an -EFAULT, we failed to read in guest 2 physical
address space. Such addressing exceptions are reported via a program
intercept to the nested hypervisor.
We faked the intercept, we have to return to guest 2. Instead, right
now we would be returning -EFAULT from the intercept handler, eventually
crashing the VM.
the correct thing to do is to return 1 as rc == 1 is the internal
representation of "we have to go back into g2".
Addressing exceptions can only happen if the g2->g3 page tables
reference invalid g2 addresses (say, either a table or the final page is
not accessible - so something that basically never happens in sane
environments.
Identified by manual code inspection.
Fixes:
a3508fbe9dc6 ("KVM: s390: vsie: initial support for nested virtualization")
Cc: <stable@vger.kernel.org> # v4.8+
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200403153050.20569-3-david@redhat.com
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
[borntraeger@de.ibm.com: fix patch description]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Hildenbrand [Fri, 3 Apr 2020 15:30:46 +0000 (17:30 +0200)]
KVM: s390: vsie: Fix region 1 ASCE sanity shadow address checks
commit
a1d032a49522cb5368e5dfb945a85899b4c74f65 upstream.
In case we have a region 1 the following calculation
(31 + ((gmap->asce & _ASCE_TYPE_MASK) >> 2)*11)
results in 64. As shifts beyond the size are undefined the compiler is
free to use instructions like sllg. sllg will only use 6 bits of the
shift value (here 64) resulting in no shift at all. That means that ALL
addresses will be rejected.
The can result in endless loops, e.g. when prefix cannot get mapped.
Fixes:
4be130a08420 ("s390/mm: add shadow gmap support")
Tested-by: Janosch Frank <frankja@linux.ibm.com>
Reported-by: Janosch Frank <frankja@linux.ibm.com>
Cc: <stable@vger.kernel.org> # v4.8+
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200403153050.20569-2-david@redhat.com
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
[borntraeger@de.ibm.com: fix patch description, remove WARN_ON_ONCE]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thomas Gleixner [Tue, 25 Feb 2020 21:36:37 +0000 (22:36 +0100)]
x86/entry/32: Add missing ASM_CLAC to general_protection entry
commit
3d51507f29f2153a658df4a0674ec5b592b62085 upstream.
All exception entry points must have ASM_CLAC right at the
beginning. The general_protection entry is missing one.
Fixes:
e59d1b0a2419 ("x86-32, smap: Add STAC/CLAC instructions to 32-bit kernel entry")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20200225220216.219537887@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric W. Biederman [Tue, 31 Mar 2020 00:01:04 +0000 (19:01 -0500)]
signal: Extend exec_id to 64bits
commit
d1e7fd6462ca9fc76650fbe6ca800e35b24267da upstream.
Replace the 32bit exec_id with a 64bit exec_id to make it impossible
to wrap the exec_id counter. With care an attacker can cause exec_id
wrap and send arbitrary signals to a newly exec'd parent. This
bypasses the signal sending checks if the parent changes their
credentials during exec.
The severity of this problem can been seen that in my limited testing
of a 32bit exec_id it can take as little as 19s to exec 65536 times.
Which means that it can take as little as 14 days to wrap a 32bit
exec_id. Adam Zabrocki has succeeded wrapping the self_exe_id in 7
days. Even my slower timing is in the uptime of a typical server.
Which means self_exec_id is simply a speed bump today, and if exec
gets noticably faster self_exec_id won't even be a speed bump.
Extending self_exec_id to 64bits introduces a problem on 32bit
architectures where reading self_exec_id is no longer atomic and can
take two read instructions. Which means that is is possible to hit
a window where the read value of exec_id does not match the written
value. So with very lucky timing after this change this still
remains expoiltable.
I have updated the update of exec_id on exec to use WRITE_ONCE
and the read of exec_id in do_notify_parent to use READ_ONCE
to make it clear that there is no locking between these two
locations.
Link: https://lore.kernel.org/kernel-hardening/20200324215049.GA3710@pi3.com.pl
Fixes: 2.3.23pre2
Cc: stable@vger.kernel.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remi Pommarel [Sat, 29 Feb 2020 16:13:47 +0000 (17:13 +0100)]
ath9k: Handle txpower changes even when TPC is disabled
commit
968ae2caad0782db5dbbabb560d3cdefd2945d38 upstream.
When TPC is disabled IEEE80211_CONF_CHANGE_POWER event can be handled to
reconfigure HW's maximum txpower.
This fixes 0dBm txpower setting when user attaches to an interface for
the first time with the following scenario:
ieee80211_do_open()
ath9k_add_interface()
ath9k_set_txpower() /* Set TX power with not yet initialized
sc->hw->conf.power_level */
ieee80211_hw_config() /* Iniatilize sc->hw->conf.power_level and
raise IEEE80211_CONF_CHANGE_POWER */
ath9k_config() /* IEEE80211_CONF_CHANGE_POWER is ignored */
This issue can be reproduced with the following:
$ modprobe -r ath9k
$ modprobe ath9k
$ wpa_supplicant -i wlan0 -c /tmp/wpa.conf &
$ iw dev /* Here TX power is either 0 or 3 depending on RF chain */
$ killall wpa_supplicant
$ iw dev /* TX power goes back to calibrated value and subsequent
calls will be fine */
Fixes:
283dd11994cde ("ath9k: add per-vif TX power capability")
Cc: stable@vger.kernel.org
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gustavo A. R. Silva [Tue, 22 Jan 2019 20:18:42 +0000 (14:18 -0600)]
MIPS: OCTEON: irq: Fix potential NULL pointer dereference
commit
792a402c2840054533ef56279c212ef6da87d811 upstream.
There is a potential NULL pointer dereference in case kzalloc()
fails and returns NULL.
Fix this by adding a NULL check on *cd*
This bug was detected with the help of Coccinelle.
Fixes:
64b139f97c01 ("MIPS: OCTEON: irq: add CIB and other fixes")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sungbo Eo [Sat, 21 Mar 2020 13:38:42 +0000 (22:38 +0900)]
irqchip/versatile-fpga: Apply clear-mask earlier
commit
6a214a28132f19ace3d835a6d8f6422ec80ad200 upstream.
Clear its own IRQs before the parent IRQ get enabled, so that the
remaining IRQs do not accidentally interrupt the parent IRQ controller.
This patch also fixes a reboot bug on OX820 SoC, where the remaining
rps-timer IRQ raises a GIC interrupt that is left pending. After that,
the rps-timer IRQ is cleared during driver initialization, and there's
no IRQ left in rps-irq when local_irq_enable() is called, which evokes
an error message "unexpected IRQ trap".
Fixes:
bdd272cbb97a ("irqchip: versatile FPGA: support cascaded interrupts from DT")
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200321133842.2408823-1-mans0n@gorani.run
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yang Xu [Fri, 28 Feb 2020 04:41:51 +0000 (12:41 +0800)]
KEYS: reaching the keys quotas correctly
commit
2e356101e72ab1361821b3af024d64877d9a798d upstream.
Currently, when we add a new user key, the calltrace as below:
add_key()
key_create_or_update()
key_alloc()
__key_instantiate_and_link
generic_key_instantiate
key_payload_reserve
......
Since commit
a08bf91ce28e ("KEYS: allow reaching the keys quotas exactly"),
we can reach max bytes/keys in key_alloc, but we forget to remove this
limit when we reserver space for payload in key_payload_reserve. So we
can only reach max keys but not max bytes when having delta between plen
and type->def_datalen. Remove this limit when instantiating the key, so we
can keep consistent with key_alloc.
Also, fix the similar problem in keyctl_chown_key().
Fixes:
0b77f5bfb45c ("keys: make the keyring quotas controllable through /proc/sys")
Fixes:
a08bf91ce28e ("KEYS: allow reaching the keys quotas exactly")
Cc: stable@vger.kernel.org # 5.0.x
Cc: Eric Biggers <ebiggers@google.com>
Signed-off-by: Yang Xu <xuyang2018.jy@cn.fujitsu.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Martin Blumenstingl [Fri, 3 Apr 2020 20:51:33 +0000 (22:51 +0200)]
thermal: devfreq_cooling: inline all stubs for CONFIG_DEVFREQ_THERMAL=n
commit
3f5b9959041e0db6dacbea80bb833bff5900999f upstream.
When CONFIG_DEVFREQ_THERMAL is disabled all functions except
of_devfreq_cooling_register_power() were already inlined. Also inline
the last function to avoid compile errors when multiple drivers call
of_devfreq_cooling_register_power() when CONFIG_DEVFREQ_THERMAL is not
set. Compilation failed with the following message:
multiple definition of `of_devfreq_cooling_register_power'
(which then lists all usages of of_devfreq_cooling_register_power())
Thomas Zimmermann reported this problem [0] on a kernel config with
CONFIG_DRM_LIMA={m,y}, CONFIG_DRM_PANFROST={m,y} and
CONFIG_DEVFREQ_THERMAL=n after both, the lima and panfrost drivers
gained devfreq cooling support.
[0] https://www.spinics.net/lists/dri-devel/msg252825.html
Fixes:
a76caf55e5b356 ("thermal: Add devfreq cooling")
Cc: stable@vger.kernel.org
Reported-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200403205133.1101808-1-martin.blumenstingl@googlemail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Engelhardt [Thu, 5 Mar 2020 12:24:25 +0000 (13:24 +0100)]
acpi/x86: ignore unspecified bit positions in the ACPI global lock field
commit
ecb9c790999fd6c5af0f44783bd0217f0b89ec2b upstream.
The value in "new" is constructed from "old" such that all bits defined
as reserved by the ACPI spec[1] are left untouched. But if those bits
do not happen to be all zero, "new < 3" will not evaluate to true.
The firmware of the laptop(s) Medion MD63490 / Akoya P15648 comes with
garbage inside the "FACS" ACPI table. The starting value is
old=0x4944454d, therefore new=0x4944454e, which is >= 3. Mask off
the reserved bits.
[1] https://uefi.org/sites/default/files/resources/ACPI_6_2.pdf
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206553
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Jan Engelhardt <jengelh@inai.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benoit Parrot [Mon, 2 Mar 2020 13:56:52 +0000 (14:56 +0100)]
media: ti-vpe: cal: fix disable_irqs to only the intended target
commit
1db56284b9da9056093681f28db48a09a243274b upstream.
disable_irqs() was mistakenly disabling all interrupts when called.
This cause all port stream to stop even if only stopping one of them.
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Fri, 3 Apr 2020 07:25:15 +0000 (09:25 +0200)]
ALSA: pcm: oss: Fix regression by buffer overflow fix
commit
ae769d3556644888c964635179ef192995f40793 upstream.
The recent fix for the OOB access in PCM OSS plugins (commit
f2ecf903ef06: "ALSA: pcm: oss: Avoid plugin buffer overflow") caused a
regression on OSS applications. The patch introduced the size check
in client and slave size calculations to limit to each plugin's buffer
size, but I overlooked that some code paths call those without
allocating the buffer but just for estimation.
This patch fixes the bug by skipping the size check for those code
paths while keeping checking in the actual transfer calls.
Fixes:
f2ecf903ef06 ("ALSA: pcm: oss: Avoid plugin buffer overflow")
Tested-and-reported-by: Jari Ruusu <jari.ruusu@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200403072515.25539-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Tue, 7 Apr 2020 08:44:02 +0000 (10:44 +0200)]
ALSA: ice1724: Fix invalid access for enumerated ctl items
commit
c47914c00be346bc5b48c48de7b0da5c2d1a296c upstream.
The access to Analog Capture Source control value implemented in
prodigy_hifi.c is wrong, as caught by the recently introduced sanity
check; it should be accessing value.enumerated.item[] instead of
value.integer.value[]. This patch corrects the wrong access pattern.
Fixes:
6b8d6e5518e2 ("[ALSA] ICE1724: Added support for Audiotrak Prodigy 7.1 HiFi & HD2, Hercules Fortissimo IV")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207139
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200407084402.25589-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Tue, 7 Apr 2020 08:44:01 +0000 (10:44 +0200)]
ALSA: hda: Fix potential access overflow in beep helper
commit
0ad3f0b384d58f3bd1f4fb87d0af5b8f6866f41a upstream.
The beep control helper function blindly stores the values in two
stereo channels no matter whether the actual control is mono or
stereo. This is practically harmless, but it annoys the recently
introduced sanity check, resulting in an error when the checker is
enabled.
This patch corrects the behavior to store only on the defined array
member.
Fixes:
0401e8548eac ("ALSA: hda - Move beep helper functions to hda_beep.c")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207139
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200407084402.25589-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Wed, 8 Apr 2020 14:04:49 +0000 (16:04 +0200)]
ALSA: hda: Add driver blacklist
commit
3c6fd1f07ed03a04debbb9a9d782205f1ef5e2ab upstream.
The recent AMD platform exposes an HD-audio bus but without any actual
codecs, which is internally tied with a USB-audio device, supposedly.
It results in "no codecs" error of HD-audio bus driver, and it's
nothing but a waste of resources.
This patch introduces a static blacklist table for skipping such a
known bogus PCI SSID entry. As of writing this patch, the known SSIDs
are:
* 1043:874f - ASUS ROG Zenith II / Strix
* 1462:cb59 - MSI TRX40 Creator
* 1462:cb60 - MSI TRX40
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206543
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200408140449.22319-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Wed, 8 Apr 2020 14:04:48 +0000 (16:04 +0200)]
ALSA: usb-audio: Add mixer workaround for TRX40 and co
commit
2a48218f8e23d47bd3e23cfdfb8aa9066f7dc3e6 upstream.
Some recent boards (supposedly with a new AMD platform) contain the
USB audio class 2 device that is often tied with HD-audio. The device
exposes an Input Gain Pad control (id=19, control=12) but this node
doesn't behave correctly, returning an error for each inquiry of
GET_MIN and GET_MAX that should have been mandatory.
As a workaround, simply ignore this node by adding a usbmix_name_map
table entry. The currently known devices are:
* 0414:a002 - Gigabyte TRX40 Aorus Pro WiFi
* 0b05:1916 - ASUS ROG Zenith II
* 0b05:1917 - ASUS ROG Strix
* 0db0:0d64 - MSI TRX40 Creator
* 0db0:543d - MSI TRX40
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206543
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200408140449.22319-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thinh Nguyen [Tue, 4 Feb 2020 02:05:32 +0000 (18:05 -0800)]
usb: gadget: composite: Inform controller driver of self-powered
commit
5e5caf4fa8d3039140b4548b6ab23dd17fce9b2c upstream.
Different configuration/condition may draw different power. Inform the
controller driver of the change so it can respond properly (e.g.
GET_STATUS request). This fixes an issue with setting MaxPower from
configfs. The composite driver doesn't check this value when setting
self-powered.
Cc: stable@vger.kernel.org
Fixes:
88af8bbe4ef7 ("usb: gadget: the start of the configfs interface")
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sriharsha Allenki [Thu, 26 Mar 2020 11:56:20 +0000 (17:26 +0530)]
usb: gadget: f_fs: Fix use after free issue as part of queue failure
commit
f63ec55ff904b2f2e126884fcad93175f16ab4bb upstream.
In AIO case, the request is freed up if ep_queue fails.
However, io_data->req still has the reference to this freed
request. In the case of this failure if there is aio_cancel
call on this io_data it will lead to an invalid dequeue
operation and a potential use after free issue.
Fix this by setting the io_data->req to NULL when the request
is freed as part of queue failure.
Fixes:
2e4c7553cd6f ("usb: gadget: f_fs: add aio support")
Signed-off-by: Sriharsha Allenki <sallenki@codeaurora.org>
CC: stable <stable@vger.kernel.org>
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Link: https://lore.kernel.org/r/20200326115620.12571-1-sallenki@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
이경택 [Wed, 1 Apr 2020 09:05:24 +0000 (18:05 +0900)]
ASoC: topology: use name_prefix for new kcontrol
commit
abca9e4a04fbe9c6df4d48ca7517e1611812af25 upstream.
Current topology doesn't add prefix of component to new kcontrol.
Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com>
Link: https://lore.kernel.org/r/009b01d60804$ae25c2d0$0a714870$@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
이경택 [Wed, 1 Apr 2020 01:04:21 +0000 (10:04 +0900)]
ASoC: dpcm: allow start or stop during pause for backend
commit
21fca8bdbb64df1297e8c65a746c4c9f4a689751 upstream.
soc_compr_trigger_fe() allows start or stop after pause_push.
In dpcm_be_dai_trigger(), however, only pause_release is allowed
command after pause_push.
So, start or stop after pause in compress offload is always
returned as error if the compress offload is used with dpcm.
To fix the problem, SND_SOC_DPCM_STATE_PAUSED should be allowed
for start or stop command.
Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/004d01d607c1$7a3d5250$6eb7f6f0$@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
이경택 [Tue, 31 Mar 2020 07:55:16 +0000 (16:55 +0900)]
ASoC: dapm: connect virtual mux with default value
commit
3bbbb7728fc853d71dbce4073fef9f281fbfb4dd upstream.
Since a virtual mixer has no backing registers
to decide which path to connect,
it will try to match with initial state.
This is to ensure that the default mixer choice will be
correctly powered up during initialization.
Invert flag is used to select initial state of the virtual switch.
Since actual hardware can't be disconnected by virtual switch,
connected is better choice as initial state in many cases.
Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com>
Link: https://lore.kernel.org/r/01a301d60731$b724ea10$256ebe30$@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
이경택 [Mon, 30 Mar 2020 07:35:59 +0000 (16:35 +0900)]
ASoC: fix regwmask
commit
0ab070917afdc93670c2d0ea02ab6defb6246a7c upstream.
If regwshift is 32 and the selected architecture compiles '<<' operator
for signed int literal into rotating shift, '1<<regwshift' became 1 and
it makes regwmask to 0x0.
The literal is set to unsigned long to get intended regwmask.
Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com>
Link: https://lore.kernel.org/r/001001d60665$db7af3e0$9270dba0$@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
YueHaibing [Thu, 26 Mar 2020 03:26:18 +0000 (11:26 +0800)]
misc: rtsx: set correct pcr_ops for rts522A
[ Upstream commit
10cea23b6aae15e8324f4101d785687f2c514fe5 ]
rts522a should use rts522a_pcr_ops, which is
diffrent with rts5227 in phy/hw init setting.
Fixes:
ce6a5acc9387 ("mfd: rtsx: Add support for rts522A")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200326032618.20472-1-yuehaibing@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Josef Bacik [Fri, 13 Mar 2020 21:17:08 +0000 (17:17 -0400)]
btrfs: track reloc roots based on their commit root bytenr
[ Upstream commit
ea287ab157c2816bf12aad4cece41372f9d146b4 ]
We always search the commit root of the extent tree for looking up back
references, however we track the reloc roots based on their current
bytenr.
This is wrong, if we commit the transaction between relocating tree
blocks we could end up in this code in build_backref_tree
if (key.objectid == key.offset) {
/*
* Only root blocks of reloc trees use backref
* pointing to itself.
*/
root = find_reloc_root(rc, cur->bytenr);
ASSERT(root);
cur->root = root;
break;
}
find_reloc_root() is looking based on the bytenr we had in the commit
root, but if we've COWed this reloc root we will not find that bytenr,
and we will trip over the ASSERT(root).
Fix this by using the commit_root->start bytenr for indexing the commit
root. Then we change the __update_reloc_root() caller to be used when
we switch the commit root for the reloc root during commit.
This fixes the panic I was seeing when we started throttling relocation
for delayed refs.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Josef Bacik [Wed, 4 Mar 2020 16:18:30 +0000 (11:18 -0500)]
btrfs: remove a BUG_ON() from merge_reloc_roots()
[ Upstream commit
7b7b74315b24dc064bc1c683659061c3d48f8668 ]
This was pretty subtle, we default to reloc roots having 0 root refs, so
if we crash in the middle of the relocation they can just be deleted.
If we successfully complete the relocation operations we'll set our root
refs to 1 in prepare_to_merge() and then go on to merge_reloc_roots().
At prepare_to_merge() time if any of the reloc roots have a 0 reference
still, we will remove that reloc root from our reloc root rb tree, and
then clean it up later.
However this only happens if we successfully start a transaction. If
we've aborted previously we will skip this step completely, and only
have reloc roots with a reference count of 0, but were never properly
removed from the reloc control's rb tree.
This isn't a problem per-se, our references are held by the list the
reloc roots are on, and by the original root the reloc root belongs to.
If we end up in this situation all the reloc roots will be added to the
dirty_reloc_list, and then properly dropped at that point. The reloc
control will be free'd and the rb tree is no longer used.
There were two options when fixing this, one was to remove the BUG_ON(),
the other was to make prepare_to_merge() handle the case where we
couldn't start a trans handle.
IMO this is the cleaner solution. I started with handling the error in
prepare_to_merge(), but it turned out super ugly. And in the end this
BUG_ON() simply doesn't matter, the cleanup was happening properly, we
were just panicing because this BUG_ON() only matters in the success
case. So I've opted to just remove it and add a comment where it was.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Boqun Feng [Thu, 12 Mar 2020 15:12:55 +0000 (23:12 +0800)]
locking/lockdep: Avoid recursion in lockdep_count_{for,back}ward_deps()
[ Upstream commit
25016bd7f4caf5fc983bbab7403d08e64cba3004 ]
Qian Cai reported a bug when PROVE_RCU_LIST=y, and read on /proc/lockdep
triggered a warning:
[ ] DEBUG_LOCKS_WARN_ON(current->hardirqs_enabled)
...
[ ] Call Trace:
[ ] lock_is_held_type+0x5d/0x150
[ ] ? rcu_lockdep_current_cpu_online+0x64/0x80
[ ] rcu_read_lock_any_held+0xac/0x100
[ ] ? rcu_read_lock_held+0xc0/0xc0
[ ] ? __slab_free+0x421/0x540
[ ] ? kasan_kmalloc+0x9/0x10
[ ] ? __kmalloc_node+0x1d7/0x320
[ ] ? kvmalloc_node+0x6f/0x80
[ ] __bfs+0x28a/0x3c0
[ ] ? class_equal+0x30/0x30
[ ] lockdep_count_forward_deps+0x11a/0x1a0
The warning got triggered because lockdep_count_forward_deps() call
__bfs() without current->lockdep_recursion being set, as a result
a lockdep internal function (__bfs()) is checked by lockdep, which is
unexpected, and the inconsistency between the irq-off state and the
state traced by lockdep caused the warning.
Apart from this warning, lockdep internal functions like __bfs() should
always be protected by current->lockdep_recursion to avoid potential
deadlocks and data inconsistency, therefore add the
current->lockdep_recursion on-and-off section to protect __bfs() in both
lockdep_count_forward_deps() and lockdep_count_backward_deps()
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200312151258.128036-1-boqun.feng@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arvind Sankar [Sun, 8 Mar 2020 08:08:44 +0000 (09:08 +0100)]
x86/boot: Use unsigned comparison for addresses
[ Upstream commit
81a34892c2c7c809f9c4e22c5ac936ae673fb9a2 ]
The load address is compared with LOAD_PHYSICAL_ADDR using a signed
comparison currently (using jge instruction).
When loading a 64-bit kernel using the new efi32_pe_entry() point added by:
97aa276579b2 ("efi/x86: Add true mixed mode entry point into .compat section")
using Qemu with -m 3072, the firmware actually loads us above 2Gb,
resulting in a very early crash.
Use the JAE instruction to perform a unsigned comparison instead, as physical
addresses should be considered unsigned.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200301230436.2246909-6-nivedita@alum.mit.edu
Link: https://lore.kernel.org/r/20200308080859.21568-14-ardb@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bob Peterson [Wed, 13 Nov 2019 20:08:45 +0000 (14:08 -0600)]
gfs2: Don't demote a glock until its revokes are written
[ Upstream commit
df5db5f9ee112e76b5202fbc331f990a0fc316d6 ]
Before this patch, run_queue would demote glocks based on whether
there are any more holders. But if the glock has pending revokes that
haven't been written to the media, giving up the glock might end in
file system corruption if the revokes never get written due to
io errors, node crashes and fences, etc. In that case, another node
will replay the metadata blocks associated with the glock, but
because the revoke was never written, it could replay that block
even though the glock had since been granted to another node who
might have made changes.
This patch changes the logic in run_queue so that it never demotes
a glock until its count of pending revokes reaches zero.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
John Garry [Fri, 28 Feb 2020 11:33:35 +0000 (19:33 +0800)]
libata: Remove extra scsi_host_put() in ata_scsi_add_hosts()
[ Upstream commit
1d72f7aec3595249dbb83291ccac041a2d676c57 ]
If the call to scsi_add_host_with_dma() in ata_scsi_add_hosts() fails,
then we may get use-after-free KASAN warns:
==================================================================
BUG: KASAN: use-after-free in kobject_put+0x24/0x180
Read of size 1 at addr
ffff0026b8c80364 by task swapper/0/1
CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W
5.6.0-rc3-00004-g5a71b206ea82-dirty #1765
Hardware name: Huawei TaiShan 200 (Model 2280)/BC82AMDD, BIOS 2280-V2 CS V3.B160.01 02/24/2020
Call trace:
dump_backtrace+0x0/0x298
show_stack+0x14/0x20
dump_stack+0x118/0x190
print_address_description.isra.9+0x6c/0x3b8
__kasan_report+0x134/0x23c
kasan_report+0xc/0x18
__asan_load1+0x5c/0x68
kobject_put+0x24/0x180
put_device+0x10/0x20
scsi_host_put+0x10/0x18
ata_devres_release+0x74/0xb0
release_nodes+0x2d0/0x470
devres_release_all+0x50/0x78
really_probe+0x2d4/0x560
driver_probe_device+0x7c/0x148
device_driver_attach+0x94/0xa0
__driver_attach+0xa8/0x110
bus_for_each_dev+0xe8/0x158
driver_attach+0x30/0x40
bus_add_driver+0x220/0x2e0
driver_register+0xbc/0x1d0
__pci_register_driver+0xbc/0xd0
ahci_pci_driver_init+0x20/0x28
do_one_initcall+0xf0/0x608
kernel_init_freeable+0x31c/0x384
kernel_init+0x10/0x118
ret_from_fork+0x10/0x18
Allocated by task 5:
save_stack+0x28/0xc8
__kasan_kmalloc.isra.8+0xbc/0xd8
kasan_kmalloc+0xc/0x18
__kmalloc+0x1a8/0x280
scsi_host_alloc+0x44/0x678
ata_scsi_add_hosts+0x74/0x268
ata_host_register+0x228/0x488
ahci_host_activate+0x1c4/0x2a8
ahci_init_one+0xd18/0x1298
local_pci_probe+0x74/0xf0
work_for_cpu_fn+0x2c/0x48
process_one_work+0x488/0xc08
worker_thread+0x330/0x5d0
kthread+0x1c8/0x1d0
ret_from_fork+0x10/0x18
Freed by task 5:
save_stack+0x28/0xc8
__kasan_slab_free+0x118/0x180
kasan_slab_free+0x10/0x18
slab_free_freelist_hook+0xa4/0x1a0
kfree+0xd4/0x3a0
scsi_host_dev_release+0x100/0x148
device_release+0x7c/0xe0
kobject_put+0xb0/0x180
put_device+0x10/0x20
scsi_host_put+0x10/0x18
ata_scsi_add_hosts+0x210/0x268
ata_host_register+0x228/0x488
ahci_host_activate+0x1c4/0x2a8
ahci_init_one+0xd18/0x1298
local_pci_probe+0x74/0xf0
work_for_cpu_fn+0x2c/0x48
process_one_work+0x488/0xc08
worker_thread+0x330/0x5d0
kthread+0x1c8/0x1d0
ret_from_fork+0x10/0x18
There is also refcount issue, as well:
WARNING: CPU: 1 PID: 1 at lib/refcount.c:28 refcount_warn_saturate+0xf8/0x170
The issue is that we make an erroneous extra call to scsi_host_put()
for that host:
So in ahci_init_one()->ata_host_alloc_pinfo()->ata_host_alloc(), we setup
a device release method - ata_devres_release() - which intends to release
the SCSI hosts:
static void ata_devres_release(struct device *gendev, void *res)
{
...
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
if (!ap)
continue;
if (ap->scsi_host)
scsi_host_put(ap->scsi_host);
}
...
}
However in the ata_scsi_add_hosts() error path, we also call
scsi_host_put() for the SCSI hosts.
Fix by removing the the scsi_host_put() calls in ata_scsi_add_hosts() and
leave this to ata_devres_release().
Fixes:
f31871951b38 ("libata: separate out ata_host_alloc() and ata_host_register()")
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andy Lutomirski [Thu, 12 Mar 2020 22:35:51 +0000 (15:35 -0700)]
selftests/x86/ptrace_syscall_32: Fix no-vDSO segfault
[ Upstream commit
630b99ab60aa972052a4202a1ff96c7e45eb0054 ]
If AT_SYSINFO is not present, don't try to call a NULL pointer.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/faaf688265a7e1a5b944d6f8bc0f6368158306d3.1584052409.git.luto@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michael Wang [Wed, 18 Mar 2020 02:15:15 +0000 (10:15 +0800)]
sched: Avoid scale real weight down to zero
[ Upstream commit
26cf52229efc87e2effa9d788f9b33c40fb3358a ]
During our testing, we found a case that shares no longer
working correctly, the cgroup topology is like:
/sys/fs/cgroup/cpu/A (shares=102400)
/sys/fs/cgroup/cpu/A/B (shares=2)
/sys/fs/cgroup/cpu/A/B/C (shares=1024)
/sys/fs/cgroup/cpu/D (shares=1024)
/sys/fs/cgroup/cpu/D/E (shares=1024)
/sys/fs/cgroup/cpu/D/E/F (shares=1024)
The same benchmark is running in group C & F, no other tasks are
running, the benchmark is capable to consumed all the CPUs.
We suppose the group C will win more CPU resources since it could
enjoy all the shares of group A, but it's F who wins much more.
The reason is because we have group B with shares as 2, since
A->cfs_rq.load.weight == B->se.load.weight == B->shares/nr_cpus,
so A->cfs_rq.load.weight become very small.
And in calc_group_shares() we calculate shares as:
load = max(scale_load_down(cfs_rq->load.weight), cfs_rq->avg.load_avg);
shares = (tg_shares * load) / tg_weight;
Since the 'cfs_rq->load.weight' is too small, the load become 0
after scale down, although 'tg_shares' is 102400, shares of the se
which stand for group A on root cfs_rq become 2.
While the se of D on root cfs_rq is far more bigger than 2, so it
wins the battle.
Thus when scale_load_down() scale real weight down to 0, it's no
longer telling the real story, the caller will have the wrong
information and the calculation will be buggy.
This patch add check in scale_load_down(), so the real weight will
be >= MIN_SHARES after scale, after applied the group C wins as
expected.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Michael Wang <yun.wang@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/38e8e212-59a1-64b2-b247-b6d0b52d8dc1@linux.alibaba.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sungbo Eo [Thu, 19 Mar 2020 02:34:48 +0000 (11:34 +0900)]
irqchip/versatile-fpga: Handle chained IRQs properly
[ Upstream commit
486562da598c59e9f835b551d7cf19507de2d681 ]
Enclose the chained handler with chained_irq_{enter,exit}(), so that the
muxed interrupts get properly acked.
This patch also fixes a reboot bug on OX820 SoC, where the jiffies timer
interrupt is never acked. The kernel waits a clock tick forever in
calibrate_delay_converge(), which leads to a boot hang.
Fixes:
c41b16f8c9d9 ("ARM: integrator/versatile: consolidate FPGA IRQ handling code")
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200319023448.1479701-1-mans0n@gorani.run
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alain Volmat [Thu, 26 Mar 2020 21:22:43 +0000 (22:22 +0100)]
i2c: st: fix missing struct parameter description
[ Upstream commit
f491c6687332920e296d0209e366fe2ca7eab1c6 ]
Fix a missing struct parameter description to allow
warning free W=1 compilation.
Signed-off-by: Alain Volmat <avolmat@me.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xu Wang [Thu, 26 Mar 2020 10:14:29 +0000 (18:14 +0800)]
qlcnic: Fix bad kzalloc null test
[ Upstream commit
bcaeb886ade124331a6f3a5cef34a3f1484c0a03 ]
In qlcnic_83xx_get_reset_instruction_template, the variable
of null test is bad, so correct it.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zheng Wei [Mon, 16 Mar 2020 14:23:47 +0000 (22:23 +0800)]
net: vxge: fix wrong __VA_ARGS__ usage
[ Upstream commit
b317538c47943f9903860d83cc0060409e12d2ff ]
printk in macro vxge_debug_ll uses __VA_ARGS__ without "##" prefix,
it causes a build error when there is no variable
arguments(e.g. only fmt is specified.).
Signed-off-by: Zheng Wei <wei.zheng@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ondrej Jirman [Fri, 21 Feb 2020 20:27:26 +0000 (21:27 +0100)]
bus: sunxi-rsb: Return correct data when mixing 16-bit and 8-bit reads
[ Upstream commit
a43ab30dcd4a1abcdd0d2461bf1cf7c0817f6cd3 ]
When doing a 16-bit read that returns data in the MSB byte, the
RSB_DATA register will keep the MSB byte unchanged when doing
the following 8-bit read. sunxi_rsb_read() will then return
a result that contains high byte from 16-bit read mixed with
the 8-bit result.
The consequence is that after this happens the PMIC's regmap will
look like this: (0x33 is the high byte from the 16-bit read)
% cat /sys/kernel/debug/regmap/sunxi-rsb-3a3/registers
00: 33
01: 33
02: 33
03: 33
04: 33
05: 33
06: 33
07: 33
08: 33
09: 33
0a: 33
0b: 33
0c: 33
0d: 33
0e: 33
[snip]
Fix this by masking the result of the read with the correct mask
based on the size of the read. There are no 16-bit users in the
mainline kernel, so this doesn't need to get into the stable tree.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Greg Kroah-Hartman [Mon, 13 Apr 2020 08:32:59 +0000 (10:32 +0200)]
Linux 4.9.219
Rob Clark [Tue, 30 Jul 2019 21:46:28 +0000 (14:46 -0700)]
drm/msm: Use the correct dma_sync calls in msm_gem
commit
3de433c5b38af49a5fc7602721e2ab5d39f1e69c upstream.
[subject was: drm/msm: shake fist angrily at dma-mapping]
So, using dma_sync_* for our cache needs works out w/ dma iommu ops, but
it falls appart with dma direct ops. The problem is that, depending on
display generation, we can have either set of dma ops (mdp4 and dpu have
iommu wired to mdss node, which maps to toplevel drm device, but mdp5
has iommu wired up to the mdp sub-node within mdss).
Fixes this splat on mdp5 devices:
Unable to handle kernel paging request at virtual address
ffffffff80000000
Mem abort info:
ESR = 0x96000144
Exception class = DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000144
CM = 1, WnR = 1
swapper pgtable: 4k pages, 48-bit VAs, pgdp=
00000000810e4000
[
ffffffff80000000] pgd=
0000000000000000
Internal error: Oops:
96000144 [#1] SMP
Modules linked in: btqcomsmd btqca bluetooth cfg80211 ecdh_generic ecc rfkill libarc4 panel_simple msm wcnss_ctrl qrtr_smd drm_kms_helper venus_enc venus_dec videobuf2_dma_sg videobuf2_memops drm venus_core ipv6 qrtr qcom_wcnss_pil v4l2_mem2mem qcom_sysmon videobuf2_v4l2 qmi_helpers videobuf2_common crct10dif_ce mdt_loader qcom_common videodev qcom_glink_smem remoteproc bmc150_accel_i2c bmc150_magn_i2c bmc150_accel_core bmc150_magn snd_soc_lpass_apq8016 snd_soc_msm8916_analog mms114 mc nf_defrag_ipv6 snd_soc_lpass_cpu snd_soc_apq8016_sbc industrialio_triggered_buffer kfifo_buf snd_soc_lpass_platform snd_soc_msm8916_digital drm_panel_orientation_quirks
CPU: 2 PID: 33 Comm: kworker/2:1 Not tainted 5.3.0-rc2 #1
Hardware name: Samsung Galaxy A5U (EUR) (DT)
Workqueue: events deferred_probe_work_func
pstate:
80000005 (Nzcv daif -PAN -UAO)
pc : __clean_dcache_area_poc+0x20/0x38
lr : arch_sync_dma_for_device+0x28/0x30
sp :
ffff0000115736a0
x29:
ffff0000115736a0 x28:
0000000000000001
x27:
ffff800074830800 x26:
ffff000011478000
x25:
0000000000000000 x24:
0000000000000001
x23:
ffff000011478a98 x22:
ffff800009fd1c10
x21:
0000000000000001 x20:
ffff800075ad0a00
x19:
0000000000000000 x18:
ffff0000112b2000
x17:
0000000000000000 x16:
0000000000000000
x15:
00000000fffffff0 x14:
ffff000011455d70
x13:
0000000000000000 x12:
0000000000000028
x11:
0000000000000001 x10:
ffff00001106c000
x9 :
ffff7e0001d6b380 x8 :
0000000000001000
x7 :
ffff7e0001d6b380 x6 :
ffff7e0001d6b382
x5 :
0000000000000000 x4 :
0000000000001000
x3 :
000000000000003f x2 :
0000000000000040
x1 :
ffffffff80001000 x0 :
ffffffff80000000
Call trace:
__clean_dcache_area_poc+0x20/0x38
dma_direct_sync_sg_for_device+0xb8/0xe8
get_pages+0x22c/0x250 [msm]
msm_gem_get_and_pin_iova+0xdc/0x168 [msm]
...
Fixes the combination of two patches:
Fixes:
0036bc73ccbe (drm/msm: stop abusing dma_map/unmap for cache)
Fixes:
449fa54d6815 (dma-direct: correct the physical addr in dma_direct_sync_sg_for_cpu/device)
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Rob Clark <robdclark@chromium.org>
[seanpaul changed subject to something more desriptive]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190730214633.17820-1-robdclark@gmail.com
Cc: nobuhiro1.iwamatsu@toshiba.co.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans Verkuil [Mon, 27 Aug 2018 08:07:42 +0000 (10:07 +0200)]
drm_dp_mst_topology: fix broken drm_dp_sideband_parse_remote_dpcd_read()
commit
a4c30a4861c54af78c4eb8b7855524c1a96d9f80 upstream.
When parsing the reply of a DP_REMOTE_DPCD_READ DPCD command the
result is wrong due to a missing idx increment.
This was never noticed since DP_REMOTE_DPCD_READ is currently not
used, but if you enable it, then it is all wrong.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e72ddac2-1dc0-100a-d816-9ac98ac009dd@xs4all.nl
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Roger Quadros [Mon, 26 Aug 2019 13:10:58 +0000 (16:10 +0300)]
usb: dwc3: don't set gadget->is_otg flag
commit
c09b73cfac2a9317f1104169045c519c6021aa1d upstream.
This reverts
commit
6a4290cc28be1 ("usb: dwc3: gadget: set the OTG flag in dwc3 gadget driver.")
We don't yet support any of the OTG mechanisms (HNP/SRP/ADP)
and are not setting gadget->otg_caps, so don't set gadget->is_otg
flag.
If we do then we end up publishing a OTG1.0 descriptor in
the gadget descriptor which causes device enumeration to fail
if we are connected to a host with CONFIG_USB_OTG enabled.
Host side log without this patch
[ 96.720453] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ 96.901391] usb 1-1: Dual-Role OTG device on non-HNP port
[ 96.907552] usb 1-1: set a_alt_hnp_support failed: -32
[ 97.060447] usb 1-1: new high-speed USB device number 3 using xhci-hcd
[ 97.241378] usb 1-1: Dual-Role OTG device on non-HNP port
[ 97.247536] usb 1-1: set a_alt_hnp_support failed: -32
[ 97.253606] usb usb1-port1: attempt power cycle
[ 97.960449] usb 1-1: new high-speed USB device number 4 using xhci-hcd
[ 98.141383] usb 1-1: Dual-Role OTG device on non-HNP port
[ 98.147540] usb 1-1: set a_alt_hnp_support failed: -32
[ 98.300453] usb 1-1: new high-speed USB device number 5 using xhci-hcd
[ 98.481391] usb 1-1: Dual-Role OTG device on non-HNP port
[ 98.487545] usb 1-1: set a_alt_hnp_support failed: -32
[ 98.493532] usb usb1-port1: unable to enumerate USB device
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arun KS [Tue, 30 Apr 2019 10:35:04 +0000 (16:05 +0530)]
arm64: Fix size of __early_cpu_boot_status
commit
61cf61d81e326163ce1557ceccfca76e11d0e57c upstream.
__early_cpu_boot_status is of type long. Use quad
assembler directive to allocate proper size.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Arun KS <arunks@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rob Clark [Sun, 30 Jun 2019 12:47:22 +0000 (05:47 -0700)]
drm/msm: stop abusing dma_map/unmap for cache
commit
0036bc73ccbe7e600a3468bf8e8879b122252274 upstream.
Recently splats like this started showing up:
WARNING: CPU: 4 PID: 251 at drivers/iommu/dma-iommu.c:451 __iommu_dma_unmap+0xb8/0xc0
Modules linked in: ath10k_snoc ath10k_core fuse msm ath mac80211 uvcvideo cfg80211 videobuf2_vmalloc videobuf2_memops vide
CPU: 4 PID: 251 Comm: kworker/u16:4 Tainted: G W 5.2.0-rc5-next-
20190619+ #2317
Hardware name: LENOVO 81JL/LNVNB161216, BIOS 9UCN23WW(V1.06) 10/25/2018
Workqueue: msm msm_gem_free_work [msm]
pstate:
80c00005 (Nzcv daif +PAN +UAO)
pc : __iommu_dma_unmap+0xb8/0xc0
lr : __iommu_dma_unmap+0x54/0xc0
sp :
ffff0000119abce0
x29:
ffff0000119abce0 x28:
0000000000000000
x27:
ffff8001f9946648 x26:
ffff8001ec271068
x25:
0000000000000000 x24:
ffff8001ea3580a8
x23:
ffff8001f95ba010 x22:
ffff80018e83ba88
x21:
ffff8001e548f000 x20:
fffffffffffff000
x19:
0000000000001000 x18:
00000000c00001fe
x17:
0000000000000000 x16:
0000000000000000
x15:
ffff000015b70068 x14:
0000000000000005
x13:
0003142cc1be1768 x12:
0000000000000001
x11:
ffff8001f6de9100 x10:
0000000000000009
x9 :
ffff000015b78000 x8 :
0000000000000000
x7 :
0000000000000001 x6 :
fffffffffffff000
x5 :
0000000000000fff x4 :
ffff00001065dbc8
x3 :
000000000000000d x2 :
0000000000001000
x1 :
fffffffffffff000 x0 :
0000000000000000
Call trace:
__iommu_dma_unmap+0xb8/0xc0
iommu_dma_unmap_sg+0x98/0xb8
put_pages+0x5c/0xf0 [msm]
msm_gem_free_work+0x10c/0x150 [msm]
process_one_work+0x1e0/0x330
worker_thread+0x40/0x438
kthread+0x12c/0x130
ret_from_fork+0x10/0x18
---[ end trace
afc0dc5ab81a06bf ]---
Not quite sure what triggered that, but we really shouldn't be abusing
dma_{map,unmap}_sg() for cache maint.
Cc: Stephen Boyd <sboyd@kernel.org>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190630124735.27786-1-robdclark@gmail.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Taniya Das [Wed, 8 May 2019 18:24:53 +0000 (23:54 +0530)]
clk: qcom: rcg: Return failure for RCG update
commit
21ea4b62e1f3dc258001a68da98c9663a9dbd6c7 upstream.
In case of update config failure, return -EBUSY, so that consumers could
handle the failure gracefully.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lkml.kernel.org/r/1557339895-21952-2-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Avihai Horon [Wed, 18 Mar 2020 10:17:41 +0000 (12:17 +0200)]
RDMA/cm: Update num_paths in cma_resolve_iboe_route error flow
commit
987914ab841e2ec281a35b54348ab109b4c0bb4e upstream.
After a successful allocation of path_rec, num_paths is set to 1, but any
error after such allocation will leave num_paths uncleared.
This causes to de-referencing a NULL pointer later on. Hence, num_paths
needs to be set back to 0 if such an error occurs.
The following crash from syzkaller revealed it.
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
CPU: 0 PID: 357 Comm: syz-executor060 Not tainted 4.18.0+ #311
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014
RIP: 0010:ib_copy_path_rec_to_user+0x94/0x3e0
Code: f1 f1 f1 f1 c7 40 0c 00 00 f4 f4 65 48 8b 04 25 28 00 00 00 48 89
45 c8 31 c0 e8 d7 60 24 ff 48 8d 7b 4c 48 89 f8 48 c1 e8 03 <42> 0f b6
14 30 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85
RSP: 0018:
ffff88006586f980 EFLAGS:
00010207
RAX:
0000000000000009 RBX:
0000000000000000 RCX:
1ffff1000d5fe475
RDX:
ffff8800621e17c0 RSI:
ffffffff820d45f9 RDI:
000000000000004c
RBP:
ffff88006586fa50 R08:
ffffed000cb0df73 R09:
ffffed000cb0df72
R10:
ffff88006586fa70 R11:
ffffed000cb0df73 R12:
1ffff1000cb0df30
R13:
ffff88006586fae8 R14:
dffffc0000000000 R15:
ffff88006aff2200
FS:
00000000016fc880(0000) GS:
ffff88006d000000(0000)
knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000020000040 CR3:
0000000063fec000 CR4:
00000000000006b0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
? ib_copy_path_rec_from_user+0xcc0/0xcc0
? __mutex_unlock_slowpath+0xfc/0x670
? wait_for_completion+0x3b0/0x3b0
? ucma_query_route+0x818/0xc60
ucma_query_route+0x818/0xc60
? ucma_listen+0x1b0/0x1b0
? sched_clock_cpu+0x18/0x1d0
? sched_clock_cpu+0x18/0x1d0
? ucma_listen+0x1b0/0x1b0
? ucma_write+0x292/0x460
ucma_write+0x292/0x460
? ucma_close_id+0x60/0x60
? sched_clock_cpu+0x18/0x1d0
? sched_clock_cpu+0x18/0x1d0
__vfs_write+0xf7/0x620
? ucma_close_id+0x60/0x60
? kernel_read+0x110/0x110
? time_hardirqs_on+0x19/0x580
? lock_acquire+0x18b/0x3a0
? finish_task_switch+0xf3/0x5d0
? _raw_spin_unlock_irq+0x29/0x40
? _raw_spin_unlock_irq+0x29/0x40
? finish_task_switch+0x1be/0x5d0
? __switch_to_asm+0x34/0x70
? __switch_to_asm+0x40/0x70
? security_file_permission+0x172/0x1e0
vfs_write+0x192/0x460
ksys_write+0xc6/0x1a0
? __ia32_sys_read+0xb0/0xb0
? entry_SYSCALL_64_after_hwframe+0x3e/0xbe
? do_syscall_64+0x1d/0x470
do_syscall_64+0x9e/0x470
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fixes:
3c86aa70bf67 ("RDMA/cm: Add RDMA CM support for IBoE devices")
Link: https://lore.kernel.org/r/20200318101741.47211-1-leon@kernel.org
Signed-off-by: Avihai Horon <avihaih@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Qiujun Huang [Sun, 8 Mar 2020 09:45:27 +0000 (17:45 +0800)]
Bluetooth: RFCOMM: fix ODEBUG bug in rfcomm_dev_ioctl
commit
71811cac8532b2387b3414f7cd8fe9e497482864 upstream.
Needn't call 'rfcomm_dlc_put' here, because 'rfcomm_dlc_exists' didn't
increase dlc->refcnt.
Reported-by: syzbot+4496e82090657320efc6@syzkaller.appspotmail.com
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Suggested-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ilya Dryomov [Mon, 10 Feb 2020 21:51:08 +0000 (22:51 +0100)]
ceph: canonicalize server path in place
commit
b27a939e8376a3f1ed09b9c33ef44d20f18ec3d0 upstream.
syzbot reported that
4fbc0c711b24 ("ceph: remove the extra slashes in
the server path") had caused a regression where an allocation could be
done under a spinlock -- compare_mount_options() is called by sget_fc()
with sb_lock held.
We don't really need the supplied server path, so canonicalize it
in place and compare it directly. To make this work, the leading
slash is kept around and the logic in ceph_real_mount() to skip it
is restored. CEPH_MSG_CLIENT_SESSION now reports the same (i.e.
canonicalized) path, with the leading slash of course.
Fixes:
4fbc0c711b24 ("ceph: remove the extra slashes in the server path")
Reported-by: syzbot+98704a51af8e3d9425a9@syzkaller.appspotmail.com
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xiubo Li [Fri, 20 Dec 2019 14:34:04 +0000 (09:34 -0500)]
ceph: remove the extra slashes in the server path
commit
4fbc0c711b2464ee1551850b85002faae0b775d5 upstream.
It's possible to pass the mount helper a server path that has more
than one contiguous slash character. For example:
$ mount -t ceph 192.168.195.165:40176:/// /mnt/cephfs/
In the MDS server side the extra slashes of the server path will be
treated as snap dir, and then we can get the following debug logs:
ceph: mount opening path //
ceph: open_root_inode opening '//'
ceph: fill_trace
0000000059b8a3bc is_dentry 0 is_target 1
ceph: alloc_inode
00000000dc4ca00b
ceph: get_inode created new inode
00000000dc4ca00b 1.
ffffffffffffffff ino 1
ceph: get_inode on 1=1.
ffffffffffffffff got
00000000dc4ca00b
And then when creating any new file or directory under the mount
point, we can hit the following BUG_ON in ceph_fill_trace():
BUG_ON(ceph_snap(dir) != dvino.snap);
Have the client ignore the extra slashes in the server path when
mounting. This will also canonicalize the path, so that identical mounts
can be consilidated.
1) "//mydir1///mydir//"
2) "/mydir1/mydir"
3) "/mydir1/mydir/"
Regardless of the internal treatment of these paths, the kernel still
stores the original string including the leading '/' for presentation
to userland.
URL: https://tracker.ceph.com/issues/42771
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kaike Wan [Thu, 26 Mar 2020 16:38:07 +0000 (12:38 -0400)]
IB/hfi1: Fix memory leaks in sysfs registration and unregistration
commit
5c15abc4328ad696fa61e2f3604918ed0c207755 upstream.
When the hfi1 driver is unloaded, kmemleak will report the following
issue:
unreferenced object 0xffff8888461a4c08 (size 8):
comm "kworker/0:0", pid 5, jiffies
4298601264 (age 2047.134s)
hex dump (first 8 bytes):
73 64 6d 61 30 00 ff ff sdma0...
backtrace:
[<
00000000311a6ef5>] kvasprintf+0x62/0xd0
[<
00000000ade94d9f>] kobject_set_name_vargs+0x1c/0x90
[<
0000000060657dbb>] kobject_init_and_add+0x5d/0xb0
[<
00000000346fe72b>] 0xffffffffa0c5ecba
[<
000000006cfc5819>] 0xffffffffa0c866b9
[<
0000000031c65580>] 0xffffffffa0c38e87
[<
00000000e9739b3f>] local_pci_probe+0x41/0x80
[<
000000006c69911d>] work_for_cpu_fn+0x16/0x20
[<
00000000601267b5>] process_one_work+0x171/0x380
[<
0000000049a0eefa>] worker_thread+0x1d1/0x3f0
[<
00000000909cf2b9>] kthread+0xf8/0x130
[<
0000000058f5f874>] ret_from_fork+0x35/0x40
This patch fixes the issue by:
- Releasing dd->per_sdma[i].kobject in hfi1_unregister_sysfs().
- This will fix the memory leak.
- Calling kobject_put() to unwind operations only for those entries in
dd->per_sdma[] whose operations have succeeded (including the current
one that has just failed) in hfi1_verbs_register_sysfs().
Cc: <stable@vger.kernel.org>
Fixes:
0cb2aa690c7e ("IB/hfi1: Add sysfs interface for affinity setup")
Link: https://lore.kernel.org/r/20200326163807.21129.27371.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kaike Wan [Thu, 26 Mar 2020 16:38:14 +0000 (12:38 -0400)]
IB/hfi1: Call kobject_put() when kobject_init_and_add() fails
commit
dfb5394f804ed4fcea1fc925be275a38d66712ab upstream.
When kobject_init_and_add() returns an error in the function
hfi1_create_port_files(), the function kobject_put() is not called for the
corresponding kobject, which potentially leads to memory leak.
This patch fixes the issue by calling kobject_put() even if
kobject_init_and_add() fails.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200326163813.21129.44280.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul Cercueil [Fri, 6 Mar 2020 22:29:27 +0000 (23:29 +0100)]
ASoC: jz4740-i2s: Fix divider written at incorrect offset in register
commit
9401d5aa328e64617d87abd59af1c91cace4c3e4 upstream.
The 4-bit divider value was written at offset 8, while the jz4740
programming manual locates it at offset 0.
Fixes:
26b0aad80a86 ("ASoC: jz4740: Add dynamic sampling rate support to jz4740-i2s")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200306222931.39664-2-paul@crapouillou.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Ahern [Thu, 2 Apr 2020 04:02:25 +0000 (21:02 -0700)]
tools/accounting/getdelays.c: fix netlink attribute length
commit
4054ab64e29bb05b3dfe758fff3c38a74ba753bb upstream.
A recent change to the netlink code:
6e237d099fac ("netlink: Relax attr
validation for fixed length types") logs a warning when programs send
messages with invalid attributes (e.g., wrong length for a u32). Yafang
reported this error message for tools/accounting/getdelays.c.
send_cmd() is wrongly adding 1 to the attribute length. As noted in
include/uapi/linux/netlink.h nla_len should be NLA_HDRLEN + payload
length, so drop the +1.
Fixes:
9e06d3f9f6b1 ("per task delay accounting taskstats interface: documentation fix")
Reported-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Yafang Shao <laoar.shao@gmail.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Shailabh Nagar <nagar@watson.ibm.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200327173111.63922-1-dsahern@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jason A. Donenfeld [Fri, 21 Feb 2020 20:10:37 +0000 (21:10 +0100)]
random: always use batched entropy for get_random_u{32,64}
commit
69efea712f5b0489e67d07565aad5c94e09a3e52 upstream.
It turns out that RDRAND is pretty slow. Comparing these two
constructions:
for (i = 0; i < CHACHA_BLOCK_SIZE; i += sizeof(ret))
arch_get_random_long(&ret);
and
long buf[CHACHA_BLOCK_SIZE / sizeof(long)];
extract_crng((u8 *)buf);
it amortizes out to 352 cycles per long for the top one and 107 cycles
per long for the bottom one, on Coffee Lake Refresh, Intel Core i9-9880H.
And importantly, the top one has the drawback of not benefiting from the
real rng, whereas the bottom one has all the nice benefits of using our
own chacha rng. As get_random_u{32,64} gets used in more places (perhaps
beyond what it was originally intended for when it was introduced as
get_random_{int,long} back in the md5 monstrosity era), it seems like it
might be a good thing to strengthen its posture a tiny bit. Doing this
should only be stronger and not any weaker because that pool is already
initialized with a bunch of rdrand data (when available). This way, we
get the benefits of the hardware rng as well as our own rng.
Another benefit of this is that we no longer hit pitfalls of the recent
stream of AMD bugs in RDRAND. One often used code pattern for various
things is:
do {
val = get_random_u32();
} while (hash_table_contains_key(val));
That recent AMD bug rendered that pattern useless, whereas we're really
very certain that chacha20 output will give pretty distributed numbers,
no matter what.
So, this simplification seems better both from a security perspective
and from a performance perspective.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20200221201037.30231-1-Jason@zx2c4.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleksij Rempel [Fri, 3 Apr 2020 07:53:25 +0000 (09:53 +0200)]
net: phy: micrel: kszphy_resume(): add delay after genphy_resume() before accessing PHY registers
[ Upstream commit
6110dff776f7fa65c35850ef65b41d3b39e2fac2 ]
After the power-down bit is cleared, the chip internally triggers a
global reset. According to the KSZ9031 documentation, we have to wait at
least 1ms for the reset to finish.
If the chip is accessed during reset, read will return 0xffff, while
write will be ignored. Depending on the system performance and MDIO bus
speed, we may or may not run in to this issue.
This bug was discovered on an iMX6QP system with KSZ9031 PHY and
attached PHY interrupt line. If IRQ was used, the link status update was
lost. In polling mode, the link status update was always correct.
The investigation showed, that during a read-modify-write access, the
read returned 0xffff (while the chip was still in reset) and
corresponding write hit the chip _after_ reset and triggered (due to the
0xffff) another reset in an undocumented bit (register 0x1f, bit 1),
resulting in the next write being lost due to the new reset cycle.
This patch fixes the issue by adding a 1...2 ms sleep after the
genphy_resume().
Fixes:
836384d2501d ("net: phy: micrel: Add specific suspend")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Richard Palethorpe [Wed, 1 Apr 2020 10:06:39 +0000 (12:06 +0200)]
slcan: Don't transmit uninitialized stack data in padding
[ Upstream commit
b9258a2cece4ec1f020715fe3554bc2e360f6264 ]
struct can_frame contains some padding which is not explicitly zeroed in
slc_bump. This uninitialized data will then be transmitted if the stack
initialization hardening feature is not enabled (CONFIG_INIT_STACK_ALL).
This commit just zeroes the whole struct including the padding.
Signed-off-by: Richard Palethorpe <rpalethorpe@suse.com>
Fixes:
a1044e36e457 ("can: add slcan driver for serial/USB-serial CAN adapters")
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: linux-can@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: security@kernel.org
Cc: wg@grandegger.com
Cc: mkl@pengutronix.de
Cc: davem@davemloft.net
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jisheng Zhang [Fri, 3 Apr 2020 02:23:29 +0000 (10:23 +0800)]
net: stmmac: dwmac1000: fix out-of-bounds mac address reg setting
[ Upstream commit
3e1221acf6a8f8595b5ce354bab4327a69d54d18 ]
Commit
9463c4455900 ("net: stmmac: dwmac1000: Clear unused address
entries") cleared the unused mac address entries, but introduced an
out-of bounds mac address register programming bug -- After setting
the secondary unicast mac addresses, the "reg" value has reached
netdev_uc_count() + 1, thus we should only clear address entries
if (addr < perfect_addr_number)
Fixes:
9463c4455900 ("net: stmmac: dwmac1000: Clear unused address entries")
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Florian Fainelli [Sun, 5 Apr 2020 20:00:30 +0000 (13:00 -0700)]
net: dsa: bcm_sf2: Ensure correct sub-node is parsed
[ Upstream commit
afa3b592953bfaecfb4f2f335ec5f935cff56804 ]
When the bcm_sf2 was converted into a proper platform device driver and
used the new dsa_register_switch() interface, we would still be parsing
the legacy DSA node that contained all the port information since the
platform firmware has intentionally maintained backward and forward
compatibility to client programs. Ensure that we do parse the correct
node, which is "ports" per the revised DSA binding.
Fixes:
d9338023fb8e ("net: dsa: bcm_sf2: Make it a real platform device driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Randy Dunlap [Thu, 2 Apr 2020 04:10:58 +0000 (21:10 -0700)]
mm: mempolicy: require at least one nodeid for MPOL_PREFERRED
commit
aa9f7d5172fac9bf1f09e678c35e287a40a7b7dd upstream.
Using an empty (malformed) nodelist that is not caught during mount option
parsing leads to a stack-out-of-bounds access.
The option string that was used was: "mpol=prefer:,". However,
MPOL_PREFERRED requires a single node number, which is not being provided
here.
Add a check that 'nodes' is not empty after parsing for MPOL_PREFERRED's
nodeid.
Fixes:
095f1fc4ebf3 ("mempolicy: rework shmem mpol parsing and display")
Reported-by: Entropy Moe <3ntr0py1337@gmail.com>
Reported-by: syzbot+b055b1a6b2b958707a21@syzkaller.appspotmail.com
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: syzbot+b055b1a6b2b958707a21@syzkaller.appspotmail.com
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Link: http://lkml.kernel.org/r/89526377-7eb6-b662-e1d8-4430928abde9@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Jordan [Tue, 3 Dec 2019 19:31:11 +0000 (14:31 -0500)]
padata: always acquire cpu_hotplug_lock before pinst->lock
commit
38228e8848cd7dd86ccb90406af32de0cad24be3 upstream.
lockdep complains when padata's paths to update cpumasks via CPU hotplug
and sysfs are both taken:
# echo 0 > /sys/devices/system/cpu/cpu1/online
# echo ff > /sys/kernel/pcrypt/pencrypt/parallel_cpumask
======================================================
WARNING: possible circular locking dependency detected
5.4.0-rc8-padata-cpuhp-v3+ #1 Not tainted
------------------------------------------------------
bash/205 is trying to acquire lock:
ffffffff8286bcd0 (cpu_hotplug_lock.rw_sem){++++}, at: padata_set_cpumask+0x2b/0x120
but task is already holding lock:
ffff8880001abfa0 (&pinst->lock){+.+.}, at: padata_set_cpumask+0x26/0x120
which lock already depends on the new lock.
padata doesn't take cpu_hotplug_lock and pinst->lock in a consistent
order. Which should be first? CPU hotplug calls into padata with
cpu_hotplug_lock already held, so it should have priority.
Fixes:
6751fb3c0e0c ("padata: Use get_online_cpus/put_online_cpus")
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Florian Fainelli [Tue, 7 Apr 2020 00:54:12 +0000 (17:54 -0700)]
net: dsa: tag_brcm: Fix skb->fwd_offload_mark location
When the backport of upstream commit
0e62f543bed03a64495bd2651d4fe1aa4bcb7fe5 ("net: dsa: Fix duplicate
frames flooded by learning") was done the assignment of
skb->fwd_offload_mark would land in brcm_tag_xmit() which is incorrect,
it should have been in brcm_tag_rcv().
Fixes:
5e845dc62f38 ("net: dsa: Fix duplicate frames flooded by learning")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eugene Syromiatnikov [Tue, 24 Mar 2020 04:22:13 +0000 (05:22 +0100)]
coresight: do not use the BIT() macro in the UAPI header
commit
9b6eaaf3db5e5888df7bca7fed7752a90f7fd871 upstream.
The BIT() macro definition is not available for the UAPI headers
(moreover, it can be defined differently in the user space); replace
its usage with the _BITUL() macro that is defined in <linux/const.h>.
Fixes:
237483aa5cf4 ("coresight: stm: adding driver for CoreSight STM component")
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200324042213.GA10452@asgard.redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Keith Busch [Tue, 25 Sep 2018 16:36:20 +0000 (10:36 -0600)]
blk-mq: Allow blocking queue tag iter callbacks
commit
530ca2c9bd6949c72c9b5cfc330cb3dbccaa3f5b upstream.
A recent commit runs tag iterator callbacks under the rcu read lock,
but existing callbacks do not satisfy the non-blocking requirement.
The commit intended to prevent an iterator from accessing a queue that's
being modified. This patch fixes the original issue by taking a queue
reference instead of reading it, which allows callbacks to make blocking
calls.
Fixes:
f5bbbbe4d6357 ("blk-mq: sync the update nr_hw_queues with blk_mq_queue_tag_busy_iter")
Acked-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Giuliano Procida <gprocida@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jianchao Wang [Tue, 21 Aug 2018 07:15:04 +0000 (15:15 +0800)]
blk-mq: sync the update nr_hw_queues with blk_mq_queue_tag_busy_iter
commit
f5bbbbe4d63577026f908a809f22f5fd5a90ea1f upstream.
For blk-mq, part_in_flight/rw will invoke blk_mq_in_flight/rw to
account the inflight requests. It will access the queue_hw_ctx and
nr_hw_queues w/o any protection. When updating nr_hw_queues and
blk_mq_in_flight/rw occur concurrently, panic comes up.
Before update nr_hw_queues, the q will be frozen. So we could use
q_usage_counter to avoid the race. percpu_ref_is_zero is used here
so that we will not miss any in-flight request. The access to
nr_hw_queues and queue_hw_ctx in blk_mq_queue_tag_busy_iter are
under rcu critical section, __blk_mq_update_nr_hw_queues could use
synchronize_rcu to ensure the zeroed q_usage_counter to be globally
visible.
Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Cc: Giuliano Procida <gprocida@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lucas Stach [Fri, 5 Jul 2019 17:17:23 +0000 (19:17 +0200)]
drm/etnaviv: replace MMU flush marker with flush sequence
commit
4900dda90af2cb13bc1d4c12ce94b98acc8fe64e upstream.
If a MMU is shared between multiple GPUs, all of them need to flush their
TLBs, so a single marker that gets reset on the first flush won't do.
Replace the flush marker with a sequence number, so that it's possible to
check if the TLB is in sync with the current page table state for each GPU.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / GitHub / LineageOS / G12 / android_kernel_amlogic_linux-4.9.git / log