Merge 4.14.283 into android-4.14-q

Changes in 4.14.283
binfmt_flat: do not stop relocating GOT entries prematurely on riscv
USB: serial: option: add Quectel BG95 modem
USB: new quirk for Dell Gen 2 devices
ptrace/xtensa: Replace PT_SINGLESTEP with TIF_SINGLESTEP
ptrace: Reimplement PTRACE_KILL by always sending SIGKILL
btrfs: add "0x" prefix for unsupported optional features
btrfs: repair super block num_devices automatically
drm/virtio: fix NULL pointer dereference in virtio_gpu_conn_get_modes
mwifiex: add mutex lock for call in mwifiex_dfs_chan_sw_work_queue
b43legacy: Fix assigning negative value to unsigned variable
b43: Fix assigning negative value to unsigned variable
ipw2x00: Fix potential NULL dereference in libipw_xmit()
ACPICA: Avoid cache flush inside virtual machines
ALSA: jack: Access input_dev under mutex
drm/amd/pm: fix double free in si_parse_power_table()
ath9k: fix QCA9561 PA bias level
media: venus: hfi: avoid null dereference in deinit
media: pci: cx23885: Fix the error handling in cx23885_initdev()
media: cx25821: Fix the warning when removing the module
scsi: megaraid: Fix error check return value of register_chrdev()
drm/amd/pm: fix the compile warning
ipv6: Don't send rs packets to the interface of ARPHRD_TUNNEL
ASoC: dapm: Don't fold register value changes into notifications
s390/preempt: disable __preempt_count_add() optimization for PROFILE_ALL_BRANCHES
dma-debug: change allocation mode from GFP_NOWAIT to GFP_ATIOMIC
ipmi:ssif: Check for NULL msg when handling events and messages
rtlwifi: Use pr_warn instead of WARN_ONCE
openrisc: start CPU timer early in boot
nvme-pci: fix a NULL pointer dereference in nvme_alloc_admin_tags
ASoC: rt5645: Fix errorenous cleanup order
net: phy: micrel: Allow probing without .driver_data
media: exynos4-is: Fix compile warning
rxrpc: Return an error to sendmsg if call failed
eth: tg3: silence the GCC 12 array-bounds warning
ARM: dts: ox820: align interrupt controller node name with dtschema
fs: jfs: fix possible NULL pointer dereference in dbFree()
ARM: OMAP1: clock: Fix UART rate reporting algorithm
fat: add ratelimit to fat*_ent_bread()
ARM: versatile: Add missing of_node_put in dcscb_init
ARM: dts: exynos: add atmel,24c128 fallback to Samsung EEPROM
ARM: hisi: Add missing of_node_put after of_find_compatible_node
PCI: Avoid pci_dev_lock() AB/BA deadlock with sriov_numvfs_store()
tracing: incorrect isolate_mote_t cast in mm_vmscan_lru_isolate
powerpc/xics: fix refcount leak in icp_opal_init()
macintosh/via-pmu: Fix build failure when CONFIG_INPUT is disabled
RDMA/hfi1: Prevent panic when SDMA is disabled
drm: fix EDID struct for old ARM OABI format
ath9k: fix ar9003_get_eepmisc
ASoC: mediatek: Fix error handling in mt8173_max98090_dev_probe
ASoC: mediatek: Fix missing of_node_put in mt2701_wm8960_machine_probe
x86/delay: Fix the wrong asm constraint in delay_loop()
drm/mediatek: Fix mtk_cec_mask()
spi: spi-ti-qspi: Fix return value handling of wait_for_completion_timeout
NFC: NULL out the dev->rfkill to prevent UAF
efi: Add missing prototype for efi_capsule_setup_info
HID: hid-led: fix maximum brightness for Dream Cheeky
spi: img-spfi: Fix pm_runtime_get_sync() error checking
ath9k_htc: fix potential out of bounds access with invalid rxstatus->rs_keyix
inotify: show inotify mask flags in proc fdinfo
fsnotify: fix wrong lockdep annotations
x86/pm: Fix false positive kmemleak report in msr_build_context()
drm/msm/dsi: fix error checks and return values for DSI xmit functions
drm/msm/hdmi: check return value after calling platform_get_resource_byname()
drm/rockchip: vop: fix possible null-ptr-deref in vop_bind()
x86: Fix return value of __setup handlers
irqchip/aspeed-i2c-ic: Fix irq_of_parse_and_map() return value
x86/mm: Cleanup the control_va_addr_alignment() __setup handler
drm/msm: return an error pointer in msm_gem_prime_get_sg_table()
media: uvcvideo: Fix missing check to determine if element is found in list
ASoC: mxs-saif: Fix refcount leak in mxs_saif_probe
regulator: pfuze100: Fix refcount leak in pfuze_parse_regulators_dt
media: st-delta: Fix PM disable depth imbalance in delta_probe
media: exynos4-is: Change clk_disable to clk_disable_unprepare
media: pvrusb2: fix array-index-out-of-bounds in pvr2_i2c_core_init
Bluetooth: fix dangling sco_conn and use-after-free in sco_sock_timeout
m68k: math-emu: Fix dependencies of math emulation support
sctp: read sk->sk_bound_dev_if once in sctp_rcv()
ASoC: wm2000: fix missing clk_disable_unprepare() on error in wm2000_anc_transition()
rxrpc: Fix listen() setting the bar too high for the prealloc rings
rxrpc: Don't try to resend the request if we're receiving the reply
soc: qcom: smp2p: Fix missing of_node_put() in smp2p_parse_ipc
soc: qcom: smsm: Fix missing of_node_put() in smsm_parse_ipc
ARM: dts: bcm2835-rpi-zero-w: Fix GPIO line name for Wifi/BT
ARM: dts: bcm2835-rpi-b: Fix GPIO line names
mfd: ipaq-micro: Fix error check return value of platform_get_irq()
scsi: fcoe: Fix Wstringop-overflow warnings in fcoe_wwn_from_mac()
pinctrl: mvebu: Fix irq_of_parse_and_map() return value
drivers/base/node.c: fix compaction sysfs file leak
powerpc/8xx: export 'cpm_setbrg' for modules
powerpc/idle: Fix return value of __setup() handler
powerpc/4xx/cpm: Fix return value of __setup() handler
tty: fix deadlock caused by calling printk() under tty_port->lock
Input: sparcspkr - fix refcount leak in bbc_beep_probe
powerpc/perf: Fix the threshold compare group constraint for power9
powerpc/fsl_rio: Fix refcount leak in fsl_rio_setup
mailbox: forward the hrtimer if not queued and under a lock
iommu/mediatek: Add list_del in mtk_iommu_remove
video: fbdev: clcdfb: Fix refcount leak in clcdfb_of_vram_setup
iommu/amd: Increase timeout waiting for GA log enablement
perf c2c: Use stdio interface if slang is not supported
perf jevents: Fix event syntax error caused by ExtSel
wifi: mac80211: fix use-after-free in chanctx code
iwlwifi: mvm: fix assert 1F04 upon reconfig
fs-writeback: writeback_sb_inodes：Recalculate 'wrote' according skipped pages
ext4: fix use-after-free in ext4_rename_dir_prepare
ext4: fix bug_on in ext4_writepages
ext4: verify dir block before splitting it
ext4: avoid cycles in directory h-tree
dlm: fix plock invalid read
dlm: fix missing lkb refcount handling
ocfs2: dlmfs: fix error handling of user_dlm_destroy_lock
scsi: dc395x: Fix a missing check on list iterator
scsi: ufs: qcom: Add a readl() to make sure ref_clk gets enabled
drm/amdgpu/cs: make commands with 0 chunks illegal behaviour.
drm/nouveau/clk: Fix an incorrect NULL check on list iterator
drm/bridge: analogix_dp: Grab runtime PM reference for DP-AUX
md: fix an incorrect NULL check in does_sb_need_changing
md: fix an incorrect NULL check in md_reload_sb
RDMA/hfi1: Fix potential integer multiplication overflow errors
irqchip/armada-370-xp: Do not touch Performance Counter Overflow on A375, A38x, A39x
irqchip: irq-xtensa-mx: fix initial IRQ affinity
mac80211: upgrade passive scan to active scan on DFS channels after beacon rx
um: chan_user: Fix winch_tramp() return value
um: Fix out-of-bounds read in LDT setup
iommu/msm: Fix an incorrect NULL check on list iterator
nodemask.h: fix compilation error with GCC12
hugetlb: fix huge_pmd_unshare address update
rtl818x: Prevent using not initialized queues
ASoC: rt5514: Fix event generation for "DSP Voice Wake Up" control
carl9170: tx: fix an incorrect use of list iterator
gma500: fix an incorrect NULL check on list iterator
arm64: dts: qcom: ipq8074: fix the sleep clock frequency
phy: qcom-qmp: fix struct clk leak on probe errors
docs/conf.py: Cope with removal of language=None in Sphinx 5.0.0
dt-bindings: gpio: altera: correct interrupt-cells
phy: qcom-qmp: fix reset-controller leak on probe errors
RDMA/rxe: Generate a completion for unsupported/invalid opcode
MIPS: IP27: Remove incorrect `cpu_has_fpu' override
netfilter: nf_tables: disallow non-stateful expression in sets earlier
pcmcia: db1xxx_ss: restrict to MIPS_DB1XXX boards
staging: greybus: codecs: fix type confusion of list iterator variable
tty: goldfish: Use tty_port_destroy() to destroy port
usb: usbip: fix a refcount leak in stub_probe()
usb: usbip: add missing device lock on tweak configuration cmd
USB: storage: karma: fix rio_karma_init return
pwm: lp3943: Fix duty calculation in case period was clamped
rpmsg: qcom_smd: Fix irq_of_parse_and_map() return value
coresight: cpu-debug: Replace mutex with mutex_trylock on panic notifier
soc: rockchip: Fix refcount leak in rockchip_grf_init
rtc: mt6397: check return value after calling platform_get_resource()
serial: meson: acquire port->lock in startup()
serial: digicolor-usart: Don't allow CS5-6
serial: txx9: Don't allow CS5-6
serial: sh-sci: Don't allow CS5-6
serial: st-asc: Sanitize CSIZE and correct PARENB for CS7
firmware: dmi-sysfs: Fix memory leak in dmi_sysfs_register_handle
clocksource/drivers/oxnas-rps: Fix irq_of_parse_and_map() return value
net: ethernet: mtk_eth_soc: out of bounds read in mtk_hwlro_get_fdir_entry()
net: dsa: mv88e6xxx: Fix refcount leak in mv88e6xxx_mdios_register
modpost: fix removing numeric suffixes
jffs2: fix memory leak in jffs2_do_fill_super
ubi: ubi_create_volume: Fix use-after-free when volume creation failed
tcp: tcp_rtx_synack() can be called from process context
perf c2c: Fix sorting in percent_rmt_hitm_cmp()
mips: cpc: Fix refcount leak in mips_cpc_default_phys_base
tracing: Fix sleeping function called from invalid context on RT kernel
tracing: Avoid adding tracer option before update_tracer_options
i2c: cadence: Increase timeout per message if necessary
m68knommu: set ZERO_PAGE() to the allocated zeroed page
m68knommu: fix undefined reference to `_init_sp'
video: fbdev: pxa3xx-gcu: release the resources correctly in pxa3xx_gcu_probe/remove()
xprtrdma: treat all calls not a bcall when bc_serv is NULL
ata: pata_octeon_cf: Fix refcount leak in octeon_cf_probe
net/mlx4_en: Fix wrong return value on ioctl EEPROM query failure
SUNRPC: Fix the calculation of xdr->end in xdr_get_next_encode_buffer()
net: mdio: unexport __init-annotated mdio_bus_init()
net: xfrm: unexport __init-annotated xfrm4_protocol_init()
net: ipv6: unexport __init-annotated seg6_hmac_init()
net: altera: Fix refcount leak in altera_tse_mdio_create
drm: imx: fix compiler warning with gcc-12
iio: dummy: iio_simple_dummy: check the return value of kstrdup()
lkdtm/usercopy: Expand size of "out of frame" object
tty: synclink_gt: Fix null-pointer-dereference in slgt_clean()
tty: Fix a possible resource leak in icom_probe
drivers: staging: rtl8192e: Fix deadlock in rtllib_beacons_stop()
USB: host: isp116x: check return value after calling platform_get_resource()
drivers: tty: serial: Fix deadlock in sa1100_set_termios()
drivers: usb: host: Fix deadlock in oxu_bus_suspend()
USB: hcd-pci: Fully suspend across freeze/thaw cycle
usb: dwc2: gadget: don't reset gadget's driver->bus
misc: rtsx: set NULL intfdata when probe fails
extcon: Modify extcon device to be created after driver data is set
clocksource/drivers/sp804: Avoid error on multiple instances
staging: rtl8712: fix uninit-value in r871xu_drv_init()
serial: msm_serial: disable interrupts in __msm_console_write()
kernfs: Separate kernfs_pr_cont_buf and rename_lock.
md: protect md_unregister_thread from reentrancy
Revert "net: af_key: add check for pfkey_broadcast in function pfkey_process"
drm/radeon: fix a possible null pointer dereference
modpost: fix undefined behavior of is_arm_mapping_symbol()
nbd: call genl_unregister_family() first in nbd_cleanup()
nbd: fix race between nbd_alloc_config() and module removal
nbd: fix io hung while disconnecting device
nodemask: Fix return values to be unsigned
vringh: Fix loop descriptors check in the indirect cases
ALSA: hda/conexant - Fix loopback issue with CX20632
cifs: return errors during session setup during reconnects
ata: libata-transport: fix {dma|pio|xfer}_mode sysfs files
nfc: st21nfca: fix incorrect validating logic in EVT_TRANSACTION
nfc: st21nfca: fix memory leaks in EVT_TRANSACTION handling
ixgbe: fix bcast packets Rx on VF after promisc removal
ixgbe: fix unexpected VLAN Rx in promisc mode on VF
Input: bcm5974 - set missing URB_NO_TRANSFER_DMA_MAP urb flag
powerpc/32: Fix overread/overwrite of thread_struct via ptrace
md/raid0: Ignore RAID0 layout if the second zone has only one device
mtd: cfi_cmdset_0002: Move and rename chip_check/chip_ready/chip_good_for_write
mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N
PCI: qcom: Fix unbalanced PHY init on probe errors
tcp: fix tcp_mtup_probe_success vs wrong snd_cwnd
Linux 4.14.283

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I79f831514ed3d7554936a3c690f5a454778a75c5

Linux 4.14.283

Link: https://lore.kernel.org/r/20220613094908.257446132@linuxfoundation.org
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: fix tcp_mtup_probe_success vs wrong snd_cwnd

commit 11825765291a93d8e7f44230da67b9f607c777bf upstream.

syzbot got a new report [1] finally pointing to a very old bug,
added in initial support for MTU probing.

tcp_mtu_probe() has checks about starting an MTU probe if
tcp_snd_cwnd(tp) >= 11.

But nothing prevents tcp_snd_cwnd(tp) to be reduced later
and before the MTU probe succeeds.

This bug would lead to potential zero-divides.

Debugging added in commit 40570375356c ("tcp: add accessors
to read/set tp->snd_cwnd") has paid off :)

While we are at it, address potential overflows in this code.

[1]
WARNING: CPU: 1 PID: 14132 at include/net/tcp.h:1219 tcp_mtup_probe_success+0x366/0x570 net/ipv4/tcp_input.c:2712
Modules linked in:
CPU: 1 PID: 14132 Comm: syz-executor.2 Not tainted 5.18.0-syzkaller-07857-gbabf0bb978e3 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:tcp_snd_cwnd_set include/net/tcp.h:1219 [inline]
RIP: 0010:tcp_mtup_probe_success+0x366/0x570 net/ipv4/tcp_input.c:2712
Code: 74 08 48 89 ef e8 da 80 17 f9 48 8b 45 00 65 48 ff 80 80 03 00 00 48 83 c4 30 5b 41 5c 41 5d 41 5e 41 5f 5d c3 e8 aa b0 c5 f8 <0f> 0b e9 16 fe ff ff 48 8b 4c 24 08 80 e1 07 38 c1 0f 8c c7 fc ff
RSP: 0018:ffffc900079e70f8 EFLAGS: 00010287
RAX: ffffffff88c0f7f6 RBX: ffff8880756e7a80 RCX: 0000000000040000
RDX: ffffc9000c6c4000 RSI: 0000000000031f9e RDI: 0000000000031f9f
RBP: 0000000000000000 R08: ffffffff88c0f606 R09: ffffc900079e7520
R10: ffffed101011226d R11: 1ffff1101011226c R12: 1ffff1100eadcf50
R13: ffff8880756e72c0 R14: 1ffff1100eadcf89 R15: dffffc0000000000
FS:  00007f643236e700(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f1ab3f1e2a0 CR3: 0000000064fe7000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 tcp_clean_rtx_queue+0x223a/0x2da0 net/ipv4/tcp_input.c:3356
 tcp_ack+0x1962/0x3c90 net/ipv4/tcp_input.c:3861
 tcp_rcv_established+0x7c8/0x1ac0 net/ipv4/tcp_input.c:5973
 tcp_v6_do_rcv+0x57b/0x1210 net/ipv6/tcp_ipv6.c:1476
 sk_backlog_rcv include/net/sock.h:1061 [inline]
 __release_sock+0x1d8/0x4c0 net/core/sock.c:2849
 release_sock+0x5d/0x1c0 net/core/sock.c:3404
 sk_stream_wait_memory+0x700/0xdc0 net/core/stream.c:145
 tcp_sendmsg_locked+0x111d/0x3fc0 net/ipv4/tcp.c:1410
 tcp_sendmsg+0x2c/0x40 net/ipv4/tcp.c:1448
 sock_sendmsg_nosec net/socket.c:714 [inline]
 sock_sendmsg net/socket.c:734 [inline]
 __sys_sendto+0x439/0x5c0 net/socket.c:2119
 __do_sys_sendto net/socket.c:2131 [inline]
 __se_sys_sendto net/socket.c:2127 [inline]
 __x64_sys_sendto+0xda/0xf0 net/socket.c:2127
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7f6431289109
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f643236e168 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 00007f643139c100 RCX: 00007f6431289109
RDX: 00000000d0d0c2ac RSI: 0000000020000080 RDI: 000000000000000a
RBP: 00007f64312e308d R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fff372533af R14: 00007f643236e300 R15: 0000000000022000

Fixes: 5d424d5a674f ("[TCP]: MTU probing")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: qcom: Fix unbalanced PHY init on probe errors

commit 83013631f0f9961416abd812e228c8efbc2f6069 upstream.

Undo the PHY initialisation (e.g. balance runtime PM) if host
initialisation fails during probe.

Link: https://lore.kernel.org/r/20220401133854.10421-3-johan+linaro@kernel.org
Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Cc: stable@vger.kernel.org # 4.5
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N

commit 0a8e98305f63deaf0a799d5cf5532cc83af035d1 upstream.

Since commit dfeae1073583("mtd: cfi_cmdset_0002: Change write buffer to
check correct value") buffered writes fail on S29GL064N. This is
because, on S29GL064N, reads return 0xFF at the end of DQ polling for
write completion, where as, chip_good() check expects actual data
written to the last location to be returned post DQ polling completion.
Fix is to revert to using chip_good() for S29GL064N which only checks
for DQ lines to settle down to determine write completion.

Link: https://lore.kernel.org/r/b687c259-6413-26c9-d4c9-b3afa69ea124@pengutronix.de/
Fixes: dfeae1073583("mtd: cfi_cmdset_0002: Change write buffer to check correct value")
Cc: stable@vger.kernel.org
Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com>
Acked-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220323170458.5608-3-ikegami.t@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: cfi_cmdset_0002: Move and rename chip_check/chip_ready/chip_good_for_write

commit 083084df578a8bdb18334f69e7b32d690aaa3247 upstream.

This is a preparation patch for the S29GL064N buffer writes fix. There
is no functional change.

Link: https://lore.kernel.org/r/b687c259-6413-26c9-d4c9-b3afa69ea124@pengutronix.de/
Fixes: dfeae1073583("mtd: cfi_cmdset_0002: Change write buffer to check correct value")
Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com>
Cc: stable@vger.kernel.org
Acked-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220323170458.5608-2-ikegami.t@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md/raid0: Ignore RAID0 layout if the second zone has only one device

commit ea23994edc4169bd90d7a9b5908c6ccefd82fa40 upstream.

The RAID0 layout is irrelevant if all members have the same size so the
array has only one zone. It is *also* irrelevant if the array has two
zones and the second zone has only one device, for example if the array
has two members of different sizes.

So in that case it makes sense to allow assembly even when the layout is
undefined, like what is done when the array has only one zone.

Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Pascal Hambourg <pascal@plouf.fr.eu.org>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/32: Fix overread/overwrite of thread_struct via ptrace

commit 8e1278444446fc97778a5e5c99bca1ce0bbc5ec9 upstream.

The ptrace PEEKUSR/POKEUSR (aka PEEKUSER/POKEUSER) API allows a process
to read/write registers of another process.

To get/set a register, the API takes an index into an imaginary address
space called the "USER area", where the registers of the process are
laid out in some fashion.

The kernel then maps that index to a particular register in its own data
structures and gets/sets the value.

The API only allows a single machine-word to be read/written at a time.
So 4 bytes on 32-bit kernels and 8 bytes on 64-bit kernels.

The way floating point registers (FPRs) are addressed is somewhat
complicated, because double precision float values are 64-bit even on
32-bit CPUs. That means on 32-bit kernels each FPR occupies two
word-sized locations in the USER area. On 64-bit kernels each FPR
occupies one word-sized location in the USER area.

Internally the kernel stores the FPRs in an array of u64s, or if VSX is
enabled, an array of pairs of u64s where one half of each pair stores
the FPR. Which half of the pair stores the FPR depends on the kernel's
endianness.

To handle the different layouts of the FPRs depending on VSX/no-VSX and
big/little endian, the TS_FPR() macro was introduced.

Unfortunately the TS_FPR() macro does not take into account the fact
that the addressing of each FPR differs between 32-bit and 64-bit
kernels. It just takes the index into the "USER area" passed from
userspace and indexes into the fp_state.fpr array.

On 32-bit there are 64 indexes that address FPRs, but only 32 entries in
the fp_state.fpr array, meaning the user can read/write 256 bytes past
the end of the array. Because the fp_state sits in the middle of the
thread_struct there are various fields than can be overwritten,
including some pointers. As such it may be exploitable.

It has also been observed to cause systems to hang or otherwise
misbehave when using gdbserver, and is probably the root cause of this
report which could not be easily reproduced:
  https://lore.kernel.org/linuxppc-dev/dc38afe9-6b78-f3f5-666b-986939e40fc6@keymile.com/

Rather than trying to make the TS_FPR() macro even more complicated to
fix the bug, or add more macros, instead add a special-case for 32-bit
kernels. This is more obvious and hopefully avoids a similar bug
happening again in future.

Note that because 32-bit kernels never have VSX enabled the code doesn't
need to consider TS_FPRWIDTH/OFFSET at all. Add a BUILD_BUG_ON() to
ensure that 32-bit && VSX is never enabled.

Fixes: 87fec0514f61 ("powerpc: PTRACE_PEEKUSR/PTRACE_POKEUSER of FPR registers in little endian builds")
Cc: stable@vger.kernel.org # v3.13+
Reported-by: Ariel Miculas <ariel.miculas@belden.com>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220609133245.573565-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: bcm5974 - set missing URB_NO_TRANSFER_DMA_MAP urb flag

commit c42e65664390be7c1ef3838cd84956d3a2739d60 upstream.

The bcm5974 driver does the allocation and dma mapping of the usb urb
data buffer, but driver does not set the URB_NO_TRANSFER_DMA_MAP flag
to let usb core know the buffer is already mapped.

usb core tries to map the already mapped buffer, causing a warning:
"xhci_hcd 0000:00:14.0: rejecting DMA map of vmalloc memory"

Fix this by setting the URB_NO_TRANSFER_DMA_MAP, letting usb core
know buffer is already mapped by bcm5974 driver

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215890
Link: https://lore.kernel.org/r/20220606113636.588955-1-mathias.nyman@linux.intel.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ixgbe: fix unexpected VLAN Rx in promisc mode on VF

commit 7bb0fb7c63df95d6027dc50d6af3bc3bbbc25483 upstream.

When the promiscuous mode is enabled on a VF, the IXGBE_VMOLR_VPE
bit (VLAN Promiscuous Enable) is set. This means that the VF will
receive packets whose VLAN is not the same than the VLAN of the VF.

For instance, in this situation:

┌────────┐    ┌────────┐    ┌────────┐
│        │    │        │    │        │
│        │    │        │    │        │
│     VF0├────┤VF1  VF2├────┤VF3     │
│        │    │        │    │        │
└────────┘    └────────┘    └────────┘
   VM1           VM2           VM3

vf 0:  vlan 1000
vf 1:  vlan 1000
vf 2:  vlan 1001
vf 3:  vlan 1001

If we tcpdump on VF3, we see all the packets, even those transmitted
on vlan 1000.

This behavior prevents to bridge VF1 and VF2 in VM2, because it will
create a loop: packets transmitted on VF1 will be received by VF2 and
vice-versa, and bridged again through the software bridge.

This patch remove the activation of VLAN Promiscuous when a VF enables
the promiscuous mode. However, the IXGBE_VMOLR_UPE bit (Unicast
Promiscuous) is kept, so that a VF receives all packets that has the
same VLAN, whatever the destination MAC address.

Fixes: 8443c1a4b192 ("ixgbe, ixgbevf: Add new mbox API xcast mode")
Cc: stable@vger.kernel.org
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ixgbe: fix bcast packets Rx on VF after promisc removal

commit 803e9895ea2b0fe80bc85980ae2d7a7e44037914 upstream.

After a VF requested to remove the promiscuous flag on an interface, the
broadcast packets are not received anymore. This breaks some protocols
like ARP.

In ixgbe_update_vf_xcast_mode(), we should keep the IXGBE_VMOLR_BAM
bit (Broadcast Accept) on promiscuous removal.

This flag is already set by default in ixgbe_set_vmolr() on VF reset.

Fixes: 8443c1a4b192 ("ixgbe, ixgbevf: Add new mbox API xcast mode")
Cc: stable@vger.kernel.org
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfc: st21nfca: fix memory leaks in EVT_TRANSACTION handling

commit 996419e0594abb311fb958553809f24f38e7abbe upstream.

Error paths do not free previously allocated memory. Add devm_kfree() to
those failure paths.

Fixes: 26fc6c7f02cb ("NFC: st21nfca: Add HCI transaction event support")
Fixes: 4fbcc1a4cb20 ("nfc: st21nfca: Fix potential buffer overflows in EVT_TRANSACTION")
Cc: stable@vger.kernel.org
Signed-off-by: Martin Faltesek <mfaltesek@google.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfc: st21nfca: fix incorrect validating logic in EVT_TRANSACTION

commit 77e5fe8f176a525523ae091d6fd0fbb8834c156d upstream.

The first validation check for EVT_TRANSACTION has two different checks
tied together with logical AND. One is a check for minimum packet length,
and the other is for a valid aid_tag. If either condition is true (fails),
then an error should be triggered.  The fix is to change && to ||.

Fixes: 26fc6c7f02cb ("NFC: st21nfca: Add HCI transaction event support")
Cc: stable@vger.kernel.org
Signed-off-by: Martin Faltesek <mfaltesek@google.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ata: libata-transport: fix {dma|pio|xfer}_mode sysfs files

commit 72aad489f992871e908ff6d9055b26c6366fb864 upstream.

The {dma|pio}_mode sysfs files are incorrectly documented as having a
list of the supported DMA/PIO transfer modes, while the corresponding
fields of the *struct* ata_device hold the transfer mode IDs, not masks.

To match these docs, the {dma|pio}_mode (and even xfer_mode!) sysfs
files are handled by the ata_bitfield_name_match() macro which leads to
reading such kind of nonsense from them:

$ cat /sys/class/ata_device/dev3.0/pio_mode
XFER_UDMA_7, XFER_UDMA_6, XFER_UDMA_5, XFER_UDMA_4, XFER_MW_DMA_4,
XFER_PIO_6, XFER_PIO_5, XFER_PIO_4, XFER_PIO_3, XFER_PIO_2, XFER_PIO_1,
XFER_PIO_0

Using the correct ata_bitfield_name_search() macro fixes that:

$ cat /sys/class/ata_device/dev3.0/pio_mode
XFER_PIO_4

While fixing the file documentation, somewhat reword the {dma|pio}_mode
file doc and add a note about being mostly useful for PATA devices to
the xfer_mode file doc...

Fixes: d9027470b886 ("[libata] Add ATA transport class")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: return errors during session setup during reconnects

commit 8ea21823aa584b55ba4b861307093b78054b0c1b upstream.

During reconnects, we check the return value from
cifs_negotiate_protocol, and have handlers for both success
and failures. But if that passes, and cifs_setup_session
returns any errors other than -EACCES, we do not handle
that. This fix adds a handler for that, so that we don't
go ahead and try a tree_connect on a failed session.

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/conexant - Fix loopback issue with CX20632

commit d5ea7544c32ba27c2c5826248e4ff58bd50a2518 upstream.

On a machine with CX20632, Alsamixer doesn't have 'Loopback
Mixing' and 'Line'.

Signed-off-by: huangwenhui <huangwenhuia@uniontech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220607065631.10708-1-huangwenhuia@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vringh: Fix loop descriptors check in the indirect cases

[ Upstream commit dbd29e0752286af74243cf891accf472b2f3edd8 ]

We should use size of descriptor chain to test loop condition
in the indirect case. And another statistical count is also introduced
for indirect descriptors to avoid conflict with the statistical count
of direct descriptors.

Fixes: f87d0fbb5798 ("vringh: host-side implementation of virtio rings.")
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Signed-off-by: Fam Zheng <fam.zheng@bytedance.com>
Message-Id: <20220505100910.137-1-xieyongji@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nodemask: Fix return values to be unsigned

[ Upstream commit 0dfe54071d7c828a02917b595456bfde1afdddc9 ]

The nodemask routines had mixed return values that provided potentially
signed return values that could never happen. This was leading to the
compiler getting confusing about the range of possible return values
(it was thinking things could be negative where they could not be). Fix
all the nodemask routines that should be returning unsigned
(or bool) values. Silences:

 mm/swapfile.c: In function ‘setup_swap_info’:
 mm/swapfile.c:2291:47: error: array subscript -1 is below array bounds of ‘struct plist_node[]’ [-Werror=array-bounds]
  2291 |                                 p->avail_lists[i].prio = 1;
       |                                 ~~~~~~~~~~~~~~^~~
 In file included from mm/swapfile.c:16:
 ./include/linux/swap.h:292:27: note: while referencing ‘avail_lists’
   292 |         struct plist_node avail_lists[]; /*
       |                           ^~~~~~~~~~~

Reported-by: Christophe de Dinechin <dinechin@redhat.com>
Link: https://lore.kernel.org/lkml/20220414150855.2407137-3-dinechin@redhat.com/
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nbd: fix io hung while disconnecting device

[ Upstream commit 09dadb5985023e27d4740ebd17e6fea4640110e5 ]

In our tests, "qemu-nbd" triggers a io hung:

INFO: task qemu-nbd:11445 blocked for more than 368 seconds.
      Not tainted 5.18.0-rc3-next-20220422-00003-g2176915513ca #884
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:qemu-nbd        state:D stack:    0 pid:11445 ppid:     1 flags:0x00000000
Call Trace:
 <TASK>
 __schedule+0x480/0x1050
 ? _raw_spin_lock_irqsave+0x3e/0xb0
 schedule+0x9c/0x1b0
 blk_mq_freeze_queue_wait+0x9d/0xf0
 ? ipi_rseq+0x70/0x70
 blk_mq_freeze_queue+0x2b/0x40
 nbd_add_socket+0x6b/0x270 [nbd]
 nbd_ioctl+0x383/0x510 [nbd]
 blkdev_ioctl+0x18e/0x3e0
 __x64_sys_ioctl+0xac/0x120
 do_syscall_64+0x35/0x80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fd8ff706577
RSP: 002b:00007fd8fcdfebf8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000040000000 RCX: 00007fd8ff706577
RDX: 000000000000000d RSI: 000000000000ab00 RDI: 000000000000000f
RBP: 000000000000000f R08: 000000000000fbe8 R09: 000055fe497c62b0
R10: 00000002aff20000 R11: 0000000000000246 R12: 000000000000006d
R13: 0000000000000000 R14: 00007ffe82dc5e70 R15: 00007fd8fcdff9c0

"qemu-ndb -d" will call ioctl 'NBD_DISCONNECT' first, however, following
message was found:

block nbd0: Send disconnect failed -32

Which indicate that something is wrong with the server. Then,
"qemu-nbd -d" will call ioctl 'NBD_CLEAR_SOCK', however ioctl can't clear
requests after commit 2516ab1543fd("nbd: only clear the queue on device
teardown"). And in the meantime, request can't complete through timeout
because nbd_xmit_timeout() will always return 'BLK_EH_RESET_TIMER', which
means such request will never be completed in this situation.

Now that the flag 'NBD_CMD_INFLIGHT' can make sure requests won't
complete multiple times, switch back to call nbd_clear_sock() in
nbd_clear_sock_ioctl(), so that inflight requests can be cleared.

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20220521073749.3146892-5-yukuai3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nbd: fix race between nbd_alloc_config() and module removal

[ Upstream commit c55b2b983b0fa012942c3eb16384b2b722caa810 ]

When nbd module is being removing, nbd_alloc_config() may be
called concurrently by nbd_genl_connect(), although try_module_get()
will return false, but nbd_alloc_config() doesn't handle it.

The race may lead to the leak of nbd_config and its related
resources (e.g, recv_workq) and oops in nbd_read_stat() due
to the unload of nbd module as shown below:

  BUG: kernel NULL pointer dereference, address: 0000000000000040
  Oops: 0000 [#1] SMP PTI
  CPU: 5 PID: 13840 Comm: kworker/u17:33 Not tainted 5.14.0+ #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
  Workqueue: knbd16-recv recv_work [nbd]
  RIP: 0010:nbd_read_stat.cold+0x130/0x1a4 [nbd]
  Call Trace:
   recv_work+0x3b/0xb0 [nbd]
   process_one_work+0x1ed/0x390
   worker_thread+0x4a/0x3d0
   kthread+0x12a/0x150
   ret_from_fork+0x22/0x30

Fixing it by checking the return value of try_module_get()
in nbd_alloc_config(). As nbd_alloc_config() may return ERR_PTR(-ENODEV),
assign nbd->config only when nbd_alloc_config() succeeds to ensure
the value of nbd->config is binary (valid or NULL).

Also adding a debug message to check the reference counter
of nbd_config during module removal.

Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20220521073749.3146892-3-yukuai3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nbd: call genl_unregister_family() first in nbd_cleanup()

[ Upstream commit 06c4da89c24e7023ea448cadf8e9daf06a0aae6e ]

Otherwise there may be race between module removal and the handling of
netlink command, which can lead to the oops as shown below:

  BUG: kernel NULL pointer dereference, address: 0000000000000098
  Oops: 0002 [#1] SMP PTI
  CPU: 1 PID: 31299 Comm: nbd-client Tainted: G            E     5.14.0-rc4
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
  RIP: 0010:down_write+0x1a/0x50
  Call Trace:
   start_creating+0x89/0x130
   debugfs_create_dir+0x1b/0x130
   nbd_start_device+0x13d/0x390 [nbd]
   nbd_genl_connect+0x42f/0x748 [nbd]
   genl_family_rcv_msg_doit.isra.0+0xec/0x150
   genl_rcv_msg+0xe5/0x1e0
   netlink_rcv_skb+0x55/0x100
   genl_rcv+0x29/0x40
   netlink_unicast+0x1a8/0x250
   netlink_sendmsg+0x21b/0x430
   ____sys_sendmsg+0x2a4/0x2d0
   ___sys_sendmsg+0x81/0xc0
   __sys_sendmsg+0x62/0xb0
   __x64_sys_sendmsg+0x1f/0x30
   do_syscall_64+0x3b/0xc0
   entry_SYSCALL_64_after_hwframe+0x44/0xae
  Modules linked in: nbd(E-)

Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20220521073749.3146892-2-yukuai3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

modpost: fix undefined behavior of is_arm_mapping_symbol()

[ Upstream commit d6b732666a1bae0df3c3ae06925043bba34502b1 ]

The return value of is_arm_mapping_symbol() is unpredictable when "$"
is passed in.

strchr(3) says:
  The strchr() and strrchr() functions return a pointer to the matched
  character or NULL if the character is not found. The terminating null
  byte is considered part of the string, so that if c is specified as
  '\0', these functions return a pointer to the terminator.

When str[1] is '\0', strchr("axtd", str[1]) is not NULL, and str[2] is
referenced (i.e. buffer overrun).

Test code
---------

  char str1[] = "abc";
  char str2[] = "ab";

  strcpy(str1, "$");
  strcpy(str2, "$");

  printf("test1: %d\n", is_arm_mapping_symbol(str1));
  printf("test2: %d\n", is_arm_mapping_symbol(str2));

Result
------

  test1: 0
  test2: 1

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/radeon: fix a possible null pointer dereference

[ Upstream commit a2b28708b645c5632dc93669ab06e97874c8244f ]

In radeon_fp_native_mode(), the return value of drm_mode_duplicate()
is assigned to mode, which will lead to a NULL pointer dereference
on failure of drm_mode_duplicate(). Add a check to avoid npd.

The failure status of drm_cvt_mode() on the other path is checked too.

Signed-off-by: Gong Yuanjun <ruc_gongyuanjun@163.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "net: af_key: add check for pfkey_broadcast in function pfkey_process"

[ Upstream commit 9c90c9b3e50e16d03c7f87d63e9db373974781e0 ]

This reverts commit 4dc2a5a8f6754492180741facf2a8787f2c415d7.

A non-zero return value from pfkey_broadcast() does not necessarily mean
an error occurred as this function returns -ESRCH when no registered
listener received the message. In particular, a call with
BROADCAST_PROMISC_ONLY flag and null one_sk argument can never return
zero so that this commit in fact prevents processing any PF_KEY message.
One visible effect is that racoon daemon fails to find encryption
algorithms like aes and refuses to start.

Excluding -ESRCH return value would fix this but it's not obvious that
we really want to bail out here and most other callers of
pfkey_broadcast() also ignore the return value. Also, as pointed out by
Steffen Klassert, PF_KEY is kind of deprecated and newer userspace code
should use netlink instead so that we should only disturb the code for
really important fixes.

v2: add a comment explaining why is the return value ignored

Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

md: protect md_unregister_thread from reentrancy

[ Upstream commit 1e267742283a4b5a8ca65755c44166be27e9aa0f ]

Generally, the md_unregister_thread is called with reconfig_mutex, but
raid_message in dm-raid doesn't hold reconfig_mutex to unregister thread,
so md_unregister_thread can be called simulitaneously from two call sites
in theory.

Then after previous commit which remove the protection of reconfig_mutex
for md_unregister_thread completely, the potential issue could be worse
than before.

Let's take pers_lock at the beginning of function to ensure reentrancy.

Reported-by: Donald Buczek <buczek@molgen.mpg.de>
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kernfs: Separate kernfs_pr_cont_buf and rename_lock.

[ Upstream commit 1a702dc88e150487c9c173a249b3d236498b9183 ]

Previously the protection of kernfs_pr_cont_buf was piggy backed by
rename_lock, which means that pr_cont() needs to be protected under
rename_lock. This can cause potential circular lock dependencies.

If there is an OOM, we have the following call hierarchy:

 -> cpuset_print_current_mems_allowed()
   -> pr_cont_cgroup_name()
     -> pr_cont_kernfs_name()

pr_cont_kernfs_name() will grab rename_lock and call printk. So we have
the following lock dependencies:

 kernfs_rename_lock -> console_sem

Sometimes, printk does a wakeup before releasing console_sem, which has
the dependence chain:

 console_sem -> p->pi_lock -> rq->lock

Now, imagine one wants to read cgroup_name under rq->lock, for example,
printing cgroup_name in a tracepoint in the scheduler code. They will
be holding rq->lock and take rename_lock:

 rq->lock -> kernfs_rename_lock

Now they will deadlock.

A prevention to this circular lock dependency is to separate the
protection of pr_cont_buf from rename_lock. In principle, rename_lock
is to protect the integrity of cgroup name when copying to buf. Once
pr_cont_buf has got its content, rename_lock can be dropped. So it's
safe to drop rename_lock after kernfs_name_locked (and
kernfs_path_from_node_locked) and rely on a dedicated pr_cont_lock
to protect pr_cont_buf.

Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/r/20220516190951.3144144-1-haoluo@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: msm_serial: disable interrupts in __msm_console_write()

[ Upstream commit aabdbb1b7a5819e18c403334a31fb0cc2c06ad41 ]

__msm_console_write() assumes that interrupts are disabled, but
with threaded console printers it is possible that the write()
callback of the console is called with interrupts enabled.

Explicitly disable interrupts using local_irq_save() to preserve
the assumed context.

Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Link: https://lore.kernel.org/r/20220506213324.470461-1-john.ogness@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: rtl8712: fix uninit-value in r871xu_drv_init()

[ Upstream commit 0458e5428e5e959d201a40ffe71d762a79ecedc4 ]

When 'tmpU1b' returns from r8712_read8(padapter, EE_9346CR) is 0,
'mac[6]' will not be initialized.

BUG: KMSAN: uninit-value in r871xu_drv_init+0x2d54/0x3070 drivers/staging/rtl8712/usb_intf.c:541
 r871xu_drv_init+0x2d54/0x3070 drivers/staging/rtl8712/usb_intf.c:541
 usb_probe_interface+0xf19/0x1600 drivers/usb/core/driver.c:396
 really_probe+0x653/0x14b0 drivers/base/dd.c:596
 __driver_probe_device+0x3e9/0x530 drivers/base/dd.c:752
 driver_probe_device drivers/base/dd.c:782 [inline]
 __device_attach_driver+0x79f/0x1120 drivers/base/dd.c:899
 bus_for_each_drv+0x2d6/0x3f0 drivers/base/bus.c:427
 __device_attach+0x593/0x8e0 drivers/base/dd.c:970
 device_initial_probe+0x4a/0x60 drivers/base/dd.c:1017
 bus_probe_device+0x17b/0x3e0 drivers/base/bus.c:487
 device_add+0x1fff/0x26e0 drivers/base/core.c:3405
 usb_set_configuration+0x37e9/0x3ed0 drivers/usb/core/message.c:2170
 usb_generic_driver_probe+0x13c/0x300 drivers/usb/core/generic.c:238
 usb_probe_device+0x309/0x570 drivers/usb/core/driver.c:293
 really_probe+0x653/0x14b0 drivers/base/dd.c:596
 __driver_probe_device+0x3e9/0x530 drivers/base/dd.c:752
 driver_probe_device drivers/base/dd.c:782 [inline]
 __device_attach_driver+0x79f/0x1120 drivers/base/dd.c:899
 bus_for_each_drv+0x2d6/0x3f0 drivers/base/bus.c:427
 __device_attach+0x593/0x8e0 drivers/base/dd.c:970
 device_initial_probe+0x4a/0x60 drivers/base/dd.c:1017
 bus_probe_device+0x17b/0x3e0 drivers/base/bus.c:487
 device_add+0x1fff/0x26e0 drivers/base/core.c:3405
 usb_new_device+0x1b8e/0x2950 drivers/usb/core/hub.c:2566
 hub_port_connect drivers/usb/core/hub.c:5358 [inline]
 hub_port_connect_change drivers/usb/core/hub.c:5502 [inline]
 port_event drivers/usb/core/hub.c:5660 [inline]
 hub_event+0x58e3/0x89e0 drivers/usb/core/hub.c:5742
 process_one_work+0xdb6/0x1820 kernel/workqueue.c:2307
 worker_thread+0x10b3/0x21e0 kernel/workqueue.c:2454
 kthread+0x3c7/0x500 kernel/kthread.c:377
 ret_from_fork+0x1f/0x30

Local variable mac created at:
 r871xu_drv_init+0x1771/0x3070 drivers/staging/rtl8712/usb_intf.c:394
 usb_probe_interface+0xf19/0x1600 drivers/usb/core/driver.c:396

KMSAN: uninit-value in r871xu_drv_init
https://syzkaller.appspot.com/bug?id=3cd92b1d85428b128503bfa7a250294c9ae00bd8

Reported-by: <syzbot+6f5ecd144854c0d8580b@syzkaller.appspotmail.com>
Tested-by: <syzbot+6f5ecd144854c0d8580b@syzkaller.appspotmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Wang Cheng <wanngchenng@gmail.com>
Link: https://lore.kernel.org/r/14c3886173dfa4597f0704547c414cfdbcd11d16.1652618244.git.wanngchenng@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clocksource/drivers/sp804: Avoid error on multiple instances

[ Upstream commit a98399cbc1e05f7b977419f03905501d566cf54e ]

When a machine sports more than one SP804 timer instance, we only bring
up the first one, since multiple timers of the same kind are not useful
to Linux. As this is intentional behaviour, we should not return an
error message, as we do today:
===============
[    0.000800] Failed to initialize '/bus@8000000/motherboard-bus@8000000/iofpga-bus@300000000/timer@120000': -22
===============

Replace the -EINVAL return with a debug message and return 0 instead.

Also we do not reach the init function anymore if the DT node is
disabled (as this is now handled by OF_DECLARE), so remove the explicit
check for that case.

This fixes a long standing bogus error when booting ARM's fastmodels.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20220506162522.3675399-1-andre.przywara@arm.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

extcon: Modify extcon device to be created after driver data is set

[ Upstream commit 5dcc2afe716d69f5112ce035cb14f007461ff189 ]

Currently, someone can invoke the sysfs such as state_show()
intermittently before dev_set_drvdata() is done.
And it can be a cause of kernel Oops because of edev is Null at that time.
So modified the driver registration to after setting drviver data.

- Oops's backtrace.

Backtrace:
[<c067865c>] (state_show) from [<c05222e8>] (dev_attr_show)
[<c05222c0>] (dev_attr_show) from [<c02c66e0>] (sysfs_kf_seq_show)
[<c02c6648>] (sysfs_kf_seq_show) from [<c02c496c>] (kernfs_seq_show)
[<c02c4938>] (kernfs_seq_show) from [<c025e2a0>] (seq_read)
[<c025e11c>] (seq_read) from [<c02c50a0>] (kernfs_fop_read)
[<c02c5064>] (kernfs_fop_read) from [<c0231cac>] (__vfs_read)
[<c0231c5c>] (__vfs_read) from [<c0231ee0>] (vfs_read)
[<c0231e34>] (vfs_read) from [<c0232464>] (ksys_read)
[<c02323f0>] (ksys_read) from [<c02324fc>] (sys_read)
[<c02324e4>] (sys_read) from [<c00091d0>] (__sys_trace_return)

Signed-off-by: bumwoo lee <bw365.lee@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

misc: rtsx: set NULL intfdata when probe fails

[ Upstream commit f861d36e021e1ac4a0a2a1f6411d623809975d63 ]

rtsx_usb_probe() doesn't call usb_set_intfdata() to null out the
interface pointer when probe fails. This leaves a stale pointer.
Noticed the missing usb_set_intfdata() while debugging an unrelated
invalid DMA mapping problem.

Fix it with a call to usb_set_intfdata(..., NULL).

Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220429210913.46804-1-skhan@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc2: gadget: don't reset gadget's driver->bus

[ Upstream commit 3120aac6d0ecd9accf56894aeac0e265f74d3d5a ]

UDC driver should not touch gadget's driver internals, especially it
should not reset driver->bus. This wasn't harmful so far, but since
commit fc274c1e9973 ("USB: gadget: Add a new bus for gadgets") gadget
subsystem got it's own bus and messing with ->bus triggers the
following NULL pointer dereference:

dwc2 12480000.hsotg: bound driver g_ether
8<--- cut here ---
Unable to handle kernel NULL pointer dereference at virtual address 00000000
[00000000] *pgd=00000000
Internal error: Oops: 5 [#1] SMP ARM
Modules linked in: ...
CPU: 0 PID: 620 Comm: modprobe Not tainted 5.18.0-rc5-next-20220504 #11862
Hardware name: Samsung Exynos (Flattened Device Tree)
PC is at module_add_driver+0x44/0xe8
LR is at sysfs_do_create_link_sd+0x84/0xe0
...
Process modprobe (pid: 620, stack limit = 0x(ptrval))
...
 module_add_driver from bus_add_driver+0xf4/0x1e4
 bus_add_driver from driver_register+0x78/0x10c
 driver_register from usb_gadget_register_driver_owner+0x40/0xb4
 usb_gadget_register_driver_owner from do_one_initcall+0x44/0x1e0
 do_one_initcall from do_init_module+0x44/0x1c8
 do_init_module from load_module+0x19b8/0x1b9c
 load_module from sys_finit_module+0xdc/0xfc
 sys_finit_module from ret_fast_syscall+0x0/0x54
Exception stack(0xf1771fa8 to 0xf1771ff0)
...
dwc2 12480000.hsotg: new device is high-speed
---[ end trace 0000000000000000 ]---

Fix this by removing driver->bus entry reset.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20220505104618.22729-1-m.szyprowski@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

USB: hcd-pci: Fully suspend across freeze/thaw cycle

[ Upstream commit 63acaa8e9c65dc34dc249440216f8e977f5d2748 ]

The documentation for the freeze() method says that it "should quiesce
the device so that it doesn't generate IRQs or DMA". The unspoken
consequence of not doing this is that MSIs aimed at non-boot CPUs may
get fully lost if they're sent during the period where the target CPU is
offline.

The current callbacks for USB HCD do not fully quiesce interrupts,
specifically on XHCI. Change to use the full suspend/resume flow for
freeze/thaw to ensure interrupts are fully quiesced. This fixes issues
where USB devices fail to thaw during hibernation because XHCI misses
its interrupt and cannot recover.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Evan Green <evgreen@chromium.org>
Link: https://lore.kernel.org/r/20220421103751.v3.2.I8226c7fdae88329ef70957b96a39b346c69a914e@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers: usb: host: Fix deadlock in oxu_bus_suspend()

[ Upstream commit 4d378f2ae58138d4c55684e1d274e7dd94aa6524 ]

There is a deadlock in oxu_bus_suspend(), which is shown below:

   (Thread 1)              |      (Thread 2)
                           | timer_action()
oxu_bus_suspend()          |  mod_timer()
 spin_lock_irq() //(1)     |  (wait a time)
 ...                       | oxu_watchdog()
 del_timer_sync()          |  spin_lock_irq() //(2)
 (wait timer to stop)      |  ...

We hold oxu->lock in position (1) of thread 1, and use
del_timer_sync() to wait timer to stop, but timer handler
also need oxu->lock in position (2) of thread 2. As a result,
oxu_bus_suspend() will block forever.

This patch extracts del_timer_sync() from the protection of
spin_lock_irq(), which could let timer handler to obtain
the needed lock.

Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220417120305.64577-1-duoming@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers: tty: serial: Fix deadlock in sa1100_set_termios()

[ Upstream commit 62b2caef400c1738b6d22f636c628d9f85cd4c4c ]

There is a deadlock in sa1100_set_termios(), which is shown
below:

   (Thread 1)              |      (Thread 2)
                           | sa1100_enable_ms()
sa1100_set_termios()       |  mod_timer()
 spin_lock_irqsave() //(1) |  (wait a time)
 ...                       | sa1100_timeout()
 del_timer_sync()          |  spin_lock_irqsave() //(2)
 (wait timer to stop)      |  ...

We hold sport->port.lock in position (1) of thread 1 and
use del_timer_sync() to wait timer to stop, but timer handler
also need sport->port.lock in position (2) of thread 2. As a result,
sa1100_set_termios() will block forever.

This patch moves del_timer_sync() before spin_lock_irqsave()
in order to prevent the deadlock.

Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220417111626.7802-1-duoming@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

USB: host: isp116x: check return value after calling platform_get_resource()

[ Upstream commit 134a3408c2d3f7e23eb0e4556e0a2d9f36c2614e ]

It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.

Signed-off-by: Zhen Ni <nizhen@uniontech.com>
Link: https://lore.kernel.org/r/20220302033716.31272-1-nizhen@uniontech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers: staging: rtl8192e: Fix deadlock in rtllib_beacons_stop()

[ Upstream commit 9b6bdbd9337de3917945847bde262a34a87a6303 ]

There is a deadlock in rtllib_beacons_stop(), which is shown
below:

   (Thread 1)              |      (Thread 2)
                           | rtllib_send_beacon()
rtllib_beacons_stop()      |  mod_timer()
 spin_lock_irqsave() //(1) |  (wait a time)
 ...                       | rtllib_send_beacon_cb()
 del_timer_sync()          |  spin_lock_irqsave() //(2)
 (wait timer to stop)      |  ...

We hold ieee->beacon_lock in position (1) of thread 1 and
use del_timer_sync() to wait timer to stop, but timer handler
also need ieee->beacon_lock in position (2) of thread 2.
As a result, rtllib_beacons_stop() will block forever.

This patch extracts del_timer_sync() from the protection of
spin_lock_irqsave(), which could let timer handler to obtain
the needed lock.

Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220417141641.124388-1-duoming@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: Fix a possible resource leak in icom_probe

[ Upstream commit ee157a79e7c82b01ae4c25de0ac75899801f322c ]

When pci_read_config_dword failed, call pci_release_regions() and
pci_disable_device() to recycle the resource previously allocated.

Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Huang Guobin <huangguobin4@huawei.com>
Link: https://lore.kernel.org/r/20220331091005.3290753-1-huangguobin4@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: synclink_gt: Fix null-pointer-dereference in slgt_clean()

[ Upstream commit 689ca31c542687709ba21ec2195c1fbce34fd029 ]

When the driver fails at alloc_hdlcdev(), and then we remove the driver
module, we will get the following splat:

[   25.065966] general protection fault, probably for non-canonical address 0xdffffc0000000182: 0000 [#1] PREEMPT SMP KASAN PTI
[   25.066914] KASAN: null-ptr-deref in range [0x0000000000000c10-0x0000000000000c17]
[   25.069262] RIP: 0010:detach_hdlc_protocol+0x2a/0x3e0
[   25.077709] Call Trace:
[   25.077924]  <TASK>
[   25.078108]  unregister_hdlc_device+0x16/0x30
[   25.078481]  slgt_cleanup+0x157/0x9f0 [synclink_gt]

Fix this by checking whether the 'info->netdev' is a null pointer first.

Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Link: https://lore.kernel.org/r/20220410114814.3920474-1-zheyuma97@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

lkdtm/usercopy: Expand size of "out of frame" object

[ Upstream commit f387e86d3a74407bdd9c5815820ac9d060962840 ]

To be sufficiently out of range for the usercopy test to see the lifetime
mismatch, expand the size of the "bad" buffer, which will let it be
beyond current_stack_pointer regardless of stack growth direction.
Paired with the recent addition of stack depth checking under
CONFIG_HARDENED_USERCOPY=y, this will correctly start tripping again.

Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/lkml/762faf1b-0443-5ddf-4430-44a20cf2ec4d@collabora.com/
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: dummy: iio_simple_dummy: check the return value of kstrdup()

[ Upstream commit ba93642188a6fed754bf7447f638bc410e05a929 ]

kstrdup() is also a memory allocation-related function, it returns NULL
when some memory errors happen. So it is better to check the return
value of it so to catch the memory error in time. Besides, there should
have a kfree() to clear up the allocation if we get a failure later in
this function to prevent memory leak.

Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Link: https://lore.kernel.org/r/tencent_C920CFCC33B9CC1C63141FE1334A39FF8508@qq.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: imx: fix compiler warning with gcc-12

[ Upstream commit 7aefd8b53815274f3ef398d370a3c9b27dd9f00c ]

Gcc-12 correctly warned about this code using a non-NULL pointer as a
truth value:

  drivers/gpu/drm/imx/ipuv3-crtc.c: In function ‘ipu_crtc_disable_planes’:
  drivers/gpu/drm/imx/ipuv3-crtc.c:72:21: error: the comparison will always evaluate as ‘true’ for the address of ‘plane’ will never be NULL [-Werror=address]
     72 |                 if (&ipu_crtc->plane[1] && plane == &ipu_crtc->plane[1]->base)
        |                     ^

due to the extraneous '&' address-of operator.

Philipp Zabel points out that The mistake had no adverse effect since
the following condition doesn't actually dereference the NULL pointer,
but the intent of the code was obviously to check for it, not to take
the address of the member.

Fixes: eb8c88808c83 ("drm/imx: add deferred plane disabling")
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: altera: Fix refcount leak in altera_tse_mdio_create

[ Upstream commit 11ec18b1d8d92b9df307d31950dcba0b3dd7283c ]

Every iteration of for_each_child_of_node() decrements
the reference count of the previous node.
When break from a for_each_child_of_node() loop,
we need to explicitly call of_node_put() on the child node when
not need anymore.
Add missing of_node_put() to avoid refcount leak.

Fixes: bbd2190ce96d ("Altera TSE: Add main and header file for Altera Ethernet Driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220607041144.7553-1-linmq006@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ipv6: unexport __init-annotated seg6_hmac_init()

[ Upstream commit 5801f064e35181c71857a80ff18af4dbec3c5f5c ]

EXPORT_SYMBOL and __init is a bad combination because the .init.text
section is freed up after the initialization. Hence, modules cannot
use symbols annotated __init. The access to a freed symbol may end up
with kernel panic.

modpost used to detect it, but it has been broken for a decade.

Recently, I fixed modpost so it started to warn it again, then this
showed up in linux-next builds.

There are two ways to fix it:

  - Remove __init
  - Remove EXPORT_SYMBOL

I chose the latter for this case because the caller (net/ipv6/seg6.c)
and the callee (net/ipv6/seg6_hmac.c) belong to the same module.
It seems an internal function call in ipv6.ko.

Fixes: bf355b8d2c30 ("ipv6: sr: add core files for SR HMAC support")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: xfrm: unexport __init-annotated xfrm4_protocol_init()

[ Upstream commit 4a388f08d8784af48f352193d2b72aaf167a57a1 ]

EXPORT_SYMBOL and __init is a bad combination because the .init.text
section is freed up after the initialization. Hence, modules cannot
use symbols annotated __init. The access to a freed symbol may end up
with kernel panic.

modpost used to detect it, but it has been broken for a decade.

Recently, I fixed modpost so it started to warn it again, then this
showed up in linux-next builds.

There are two ways to fix it:

  - Remove __init
  - Remove EXPORT_SYMBOL

I chose the latter for this case because the only in-tree call-site,
net/ipv4/xfrm4_policy.c is never compiled as modular.
(CONFIG_XFRM is boolean)

Fixes: 2f32b51b609f ("xfrm: Introduce xfrm_input_afinfo to access the the callbacks properly")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: mdio: unexport __init-annotated mdio_bus_init()

[ Upstream commit 35b42dce619701f1300fb8498dae82c9bb1f0263 ]

EXPORT_SYMBOL and __init is a bad combination because the .init.text
section is freed up after the initialization. Hence, modules cannot
use symbols annotated __init. The access to a freed symbol may end up
with kernel panic.

modpost used to detect it, but it has been broken for a decade.

Recently, I fixed modpost so it started to warn it again, then this
showed up in linux-next builds.

There are two ways to fix it:

  - Remove __init
  - Remove EXPORT_SYMBOL

I chose the latter for this case because the only in-tree call-site,
drivers/net/phy/phy_device.c is never compiled as modular.
(CONFIG_PHYLIB is boolean)

Fixes: 90eff9096c01 ("net: phy: Allow splitting MDIO bus/device support from PHYs")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC: Fix the calculation of xdr->end in xdr_get_next_encode_buffer()

[ Upstream commit 6c254bf3b637dd4ef4f78eb78c7447419c0161d7 ]

I found that NFSD's new NFSv3 READDIRPLUS XDR encoder was screwing up
right at the end of the page array. xdr_get_next_encode_buffer() does
not compute the value of xdr->end correctly:

 * The check to see if we're on the final available page in xdr->buf
   needs to account for the space consumed by @nbytes.

 * The new xdr->end value needs to account for the portion of @nbytes
   that is to be encoded into the previous buffer.

Fixes: 2825a7f90753 ("nfsd4: allow encoding across page boundaries")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: NeilBrown <neilb@suse.de>
Reviewed-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx4_en: Fix wrong return value on ioctl EEPROM query failure

[ Upstream commit f5826c8c9d57210a17031af5527056eefdc2b7eb ]

The ioctl EEPROM query wrongly returns success on read failures, fix
that by returning the appropriate error code.

Fixes: 7202da8b7f71 ("ethtool, net/mlx4_en: Cable info, get_module_info/eeprom ethtool support")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20220606115718.14233-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ata: pata_octeon_cf: Fix refcount leak in octeon_cf_probe

[ Upstream commit 10d6bdf532902be1d8aa5900b3c03c5671612aa2 ]

of_find_device_by_node() takes reference, we should use put_device()
to release it when not need anymore.
Add missing put_device() to avoid refcount leak.

Fixes: 43f01da0f279 ("MIPS/OCTEON/ata: Convert pata_octeon_cf.c to use device tree.")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xprtrdma: treat all calls not a bcall when bc_serv is NULL

[ Upstream commit 11270e7ca268e8d61b5d9e5c3a54bd1550642c9c ]

When a rdma server returns a fault format reply, nfs v3 client may
treats it as a bcall when bc service is not exist.

The debug message at rpcrdma_bc_receive_call are,

[56579.837169] RPC:       rpcrdma_bc_receive_call: callback XID
00000001, length=20
[56579.837174] RPC:       rpcrdma_bc_receive_call: 00 00 00 01 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 04

After that, rpcrdma_bc_receive_call will meets NULL pointer as,

[  226.057890] BUG: unable to handle kernel NULL pointer dereference at
00000000000000c8
...
[  226.058704] RIP: 0010:_raw_spin_lock+0xc/0x20
...
[  226.059732] Call Trace:
[  226.059878]  rpcrdma_bc_receive_call+0x138/0x327 [rpcrdma]
[  226.060011]  __ib_process_cq+0x89/0x170 [ib_core]
[  226.060092]  ib_cq_poll_work+0x26/0x80 [ib_core]
[  226.060257]  process_one_work+0x1a7/0x360
[  226.060367]  ? create_worker+0x1a0/0x1a0
[  226.060440]  worker_thread+0x30/0x390
[  226.060500]  ? create_worker+0x1a0/0x1a0
[  226.060574]  kthread+0x116/0x130
[  226.060661]  ? kthread_flush_work_fn+0x10/0x10
[  226.060724]  ret_from_fork+0x35/0x40
...

Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

video: fbdev: pxa3xx-gcu: release the resources correctly in pxa3xx_gcu_probe/remove()

[ Upstream commit d87ad457f7e1b8d2492ca5b1531eb35030a1cc8f ]

In pxa3xx_gcu_probe(), the sequence of error lable is wrong, it will
leads some resource leaked, so adjust the sequence to handle the error
correctly, and if pxa3xx_gcu_add_buffer() fails, pxa3xx_gcu_free_buffers()
need be called.
In pxa3xx_gcu_remove(), add missing clk_disable_unpreprare().

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

m68knommu: fix undefined reference to `_init_sp'

[ Upstream commit a71b9e66fee47c59b3ec34e652b5c23bc6550794 ]

When configuring a nommu classic m68k system enabling the uboot parameter
passing support (CONFIG_UBOOT) will produce the following compile error:

   m68k-linux-ld: arch/m68k/kernel/uboot.o: in function `process_uboot_commandline':
   uboot.c:(.init.text+0x32): undefined reference to `_init_sp'

The logic to support this option is only used on ColdFire based platforms
(in its head.S startup code). So make the selection of this option
depend on building for a ColdFire based platform.

Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

m68knommu: set ZERO_PAGE() to the allocated zeroed page

[ Upstream commit dc068f46217970d9516f16cd37972a01d50dc055 ]

The non-MMU m68k pagetable ZERO_PAGE() macro is being set to the
somewhat non-sensical value of "virt_to_page(0)". The zeroth page
is not in any way guaranteed to be a page full of "0". So the result
is that ZERO_PAGE() will almost certainly contain random values.

We already allocate a real "empty_zero_page" in the mm setup code shared
between MMU m68k and non-MMU m68k. It is just not hooked up to the
ZERO_PAGE() macro for the non-MMU m68k case.

Fix ZERO_PAGE() to use the allocated "empty_zero_page" pointer.

I am not aware of any specific issues caused by the old code.

Link: https://lore.kernel.org/linux-m68k/2a462b23-5b8e-bbf4-ec7d-778434a3b9d7@google.com/T/#t
Reported-by: Hugh Dickens <hughd@google.com>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: cadence: Increase timeout per message if necessary

[ Upstream commit 96789dce043f5bff8b7d62aa28d52a7c59403a84 ]

Timeout as 1 second sets an upper limit on the length
of the transfer executed, but there is no maximum length
of a write or read message set in i2c_adapter_quirks for
this controller.

This upper limit affects devices that require sending
large firmware blobs over I2C.

To remove that limitation, calculate the minimal time
necessary, plus some wiggle room, for every message and
use it instead of the default one second, if more than
one second.

Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracing: Avoid adding tracer option before update_tracer_options

[ Upstream commit ef9188bcc6ca1d8a2ad83e826b548e6820721061 ]

To prepare for support asynchronous tracer_init_tracefs initcall,
avoid calling create_trace_option_files before __update_tracer_options.
Otherwise, create_trace_option_files will show warning because
some tracers in trace_types list are already in tr->topts.

For example, hwlat_tracer call register_tracer in late_initcall,
and global_trace.dir is already created in tracing_init_dentry,
hwlat_tracer will be put into tr->topts.
Then if the __update_tracer_options is executed after hwlat_tracer
registered, create_trace_option_files find that hwlat_tracer is
already in tr->topts.

Link: https://lkml.kernel.org/r/20220426122407.17042-2-mark-pk.tsai@mediatek.com
Link: https://lore.kernel.org/lkml/20220322133339.GA32582@xsang-OptiPlex-9020/
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracing: Fix sleeping function called from invalid context on RT kernel

[ Upstream commit 12025abdc8539ed9d5014e2d647a3fd1bd3de5cd ]

When setting bootparams="trace_event=initcall:initcall_start tp_printk=1" in the
cmdline, the output_printk() was called, and the spin_lock_irqsave() was called in the
atomic and irq disable interrupt context suitation. On the PREEMPT_RT kernel,
these locks are replaced with sleepable rt-spinlock, so the stack calltrace will
be triggered.
Fix it by raw_spin_lock_irqsave when PREEMPT_RT and "trace_event=initcall:initcall_start
tp_printk=1" enabled.

 BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46
 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper/0
 preempt_count: 2, expected: 0
 RCU nest depth: 0, expected: 0
 Preemption disabled at:
 [<ffffffff8992303e>] try_to_wake_up+0x7e/0xba0
 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.17.1-rt17+ #19 34c5812404187a875f32bee7977f7367f9679ea7
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
 Call Trace:
  <TASK>
  dump_stack_lvl+0x60/0x8c
  dump_stack+0x10/0x12
  __might_resched.cold+0x11d/0x155
  rt_spin_lock+0x40/0x70
  trace_event_buffer_commit+0x2fa/0x4c0
  ? map_vsyscall+0x93/0x93
  trace_event_raw_event_initcall_start+0xbe/0x110
  ? perf_trace_initcall_finish+0x210/0x210
  ? probe_sched_wakeup+0x34/0x40
  ? ttwu_do_wakeup+0xda/0x310
  ? trace_hardirqs_on+0x35/0x170
  ? map_vsyscall+0x93/0x93
  do_one_initcall+0x217/0x3c0
  ? trace_event_raw_event_initcall_level+0x170/0x170
  ? push_cpu_stop+0x400/0x400
  ? cblist_init_generic+0x241/0x290
  kernel_init_freeable+0x1ac/0x347
  ? _raw_spin_unlock_irq+0x65/0x80
  ? rest_init+0xf0/0xf0
  kernel_init+0x1e/0x150
  ret_from_fork+0x22/0x30
  </TASK>

Link: https://lkml.kernel.org/r/20220419013910.894370-1-jun.miao@intel.com
Signed-off-by: Jun Miao <jun.miao@intel.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mips: cpc: Fix refcount leak in mips_cpc_default_phys_base

[ Upstream commit 4107fa700f314592850e2c64608f6ede4c077476 ]

Add the missing of_node_put() to release the refcount incremented
by of_find_compatible_node().

Signed-off-by: Gong Yuanjun <ruc_gongyuanjun@163.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf c2c: Fix sorting in percent_rmt_hitm_cmp()

[ Upstream commit b24192a17337abbf3f44aaa75e15df14a2d0016e ]

The function percent_rmt_hitm_cmp() wrongly uses local HITMs for
sorting remote HITMs.

Since this function is to sort cache lines for remote HITMs, this patch
changes to use 'rmt_hitm' field for correct sorting.

Fixes: 9cb3500afc0980c5 ("perf c2c report: Add hitm/store percent related sort keys")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Mario <jmario@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220530084253.750190-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: tcp_rtx_synack() can be called from process context

[ Upstream commit 0a375c822497ed6ad6b5da0792a12a6f1af10c0b ]

Laurent reported the enclosed report [1]

This bug triggers with following coditions:

0) Kernel built with CONFIG_DEBUG_PREEMPT=y

1) A new passive FastOpen TCP socket is created.
   This FO socket waits for an ACK coming from client to be a complete
   ESTABLISHED one.
2) A socket operation on this socket goes through lock_sock()
   release_sock() dance.
3) While the socket is owned by the user in step 2),
   a retransmit of the SYN is received and stored in socket backlog.
4) At release_sock() time, the socket backlog is processed while
   in process context.
5) A SYNACK packet is cooked in response of the SYN retransmit.
6) -> tcp_rtx_synack() is called in process context.

Before blamed commit, tcp_rtx_synack() was always called from BH handler,
from a timer handler.

Fix this by using TCP_INC_STATS() & NET_INC_STATS()
which do not assume caller is in non preemptible context.

[1]
BUG: using __this_cpu_add() in preemptible [00000000] code: epollpep/2180
caller is tcp_rtx_synack.part.0+0x36/0xc0
CPU: 10 PID: 2180 Comm: epollpep Tainted: G           OE     5.16.0-0.bpo.4-amd64 #1  Debian 5.16.12-1~bpo11+1
Hardware name: Supermicro SYS-5039MC-H8TRF/X11SCD-F, BIOS 1.7 11/23/2021
Call Trace:
 <TASK>
 dump_stack_lvl+0x48/0x5e
 check_preemption_disabled+0xde/0xe0
 tcp_rtx_synack.part.0+0x36/0xc0
 tcp_rtx_synack+0x8d/0xa0
 ? kmem_cache_alloc+0x2e0/0x3e0
 ? apparmor_file_alloc_security+0x3b/0x1f0
 inet_rtx_syn_ack+0x16/0x30
 tcp_check_req+0x367/0x610
 tcp_rcv_state_process+0x91/0xf60
 ? get_nohz_timer_target+0x18/0x1a0
 ? lock_timer_base+0x61/0x80
 ? preempt_count_add+0x68/0xa0
 tcp_v4_do_rcv+0xbd/0x270
 __release_sock+0x6d/0xb0
 release_sock+0x2b/0x90
 sock_setsockopt+0x138/0x1140
 ? __sys_getsockname+0x7e/0xc0
 ? aa_sk_perm+0x3e/0x1a0
 __sys_setsockopt+0x198/0x1e0
 __x64_sys_setsockopt+0x21/0x30
 do_syscall_64+0x38/0xc0
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Fixes: 168a8f58059a ("tcp: TCP Fast Open Server - main code path")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Laurent Fasnacht <laurent.fasnacht@proton.ch>
Acked-by: Neal Cardwell <ncardwell@google.com>
Link: https://lore.kernel.org/r/20220530213713.601888-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ubi: ubi_create_volume: Fix use-after-free when volume creation failed

[ Upstream commit 8c03a1c21d72210f81cb369cc528e3fde4b45411 ]

There is an use-after-free problem for 'eba_tbl' in ubi_create_volume()'s
error handling path:

  ubi_eba_replace_table(vol, eba_tbl)
    vol->eba_tbl = tbl
out_mapping:
  ubi_eba_destroy_table(eba_tbl)   // Free 'eba_tbl'
out_unlock:
  put_device(&vol->dev)
    vol_release
      kfree(tbl->entries)   // UAF

Fix it by removing redundant 'eba_tbl' releasing.
Fetch a reproducer in [Link].

Fixes: 493cfaeaa0c9b ("mtd: utilize new cdev_device_add helper function")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215965
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

jffs2: fix memory leak in jffs2_do_fill_super

[ Upstream commit c14adb1cf70a984ed081c67e9d27bc3caad9537c ]

If jffs2_iget() or d_make_root() in jffs2_do_fill_super() returns
an error, we can observe the following kmemleak report:

--------------------------------------------
unreferenced object 0xffff888105a65340 (size 64):
  comm "mount", pid 710, jiffies 4302851558 (age 58.239s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff859c45e5>] kmem_cache_alloc_trace+0x475/0x8a0
    [<ffffffff86160146>] jffs2_sum_init+0x96/0x1a0
    [<ffffffff86140e25>] jffs2_do_mount_fs+0x745/0x2120
    [<ffffffff86149fec>] jffs2_do_fill_super+0x35c/0x810
    [<ffffffff8614aae9>] jffs2_fill_super+0x2b9/0x3b0
    [...]
unreferenced object 0xffff8881bd7f0000 (size 65536):
  comm "mount", pid 710, jiffies 4302851558 (age 58.239s)
  hex dump (first 32 bytes):
    bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb  ................
    bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb  ................
  backtrace:
    [<ffffffff858579ba>] kmalloc_order+0xda/0x110
    [<ffffffff85857a11>] kmalloc_order_trace+0x21/0x130
    [<ffffffff859c2ed1>] __kmalloc+0x711/0x8a0
    [<ffffffff86160189>] jffs2_sum_init+0xd9/0x1a0
    [<ffffffff86140e25>] jffs2_do_mount_fs+0x745/0x2120
    [<ffffffff86149fec>] jffs2_do_fill_super+0x35c/0x810
    [<ffffffff8614aae9>] jffs2_fill_super+0x2b9/0x3b0
    [...]
--------------------------------------------

This is because the resources allocated in jffs2_sum_init() are not
released. Call jffs2_sum_exit() to release these resources to solve
the problem.

Fixes: e631ddba5887 ("[JFFS2] Add erase block summary support (mount time improvement)")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

modpost: fix removing numeric suffixes

[ Upstream commit b5beffa20d83c4e15306c991ffd00de0d8628338 ]

With the `-z unique-symbol` linker flag or any similar mechanism,
it is possible to trigger the following:

ERROR: modpost: "param_set_uint.0" [vmlinux] is a static EXPORT_SYMBOL

The reason is that for now the condition from remove_dot():

if (m && (s[n + m] == '.' || s[n + m] == 0))

which was designed to test if it's a dot or a '\0' after the suffix
is never satisfied.
This is due to that `s[n + m]` always points to the last digit of a
numeric suffix, not on the symbol next to it (from a custom debug
print added to modpost):

param_set_uint.0, s[n + m] is '0', s[n + m + 1] is '\0'

So it's off-by-one and was like that since 2014.

Fix this for the sake of any potential upcoming features, but don't
bother stable-backporting, as it's well hidden -- apart from that
LD flag, it can be triggered only with GCC LTO which never landed
upstream.

Fixes: fcd38ed0ff26 ("scripts: modpost: fix compilation warning")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: mv88e6xxx: Fix refcount leak in mv88e6xxx_mdios_register

[ Upstream commit 02ded5a173619b11728b8bf75a3fd995a2c1ff28 ]

of_get_child_by_name() returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.

mv88e6xxx_mdio_register() pass the device node to of_mdiobus_register().
We don't need the device node after it.

Add missing of_node_put() to avoid refcount leak.

Fixes: a3c53be55c95 ("net: dsa: mv88e6xxx: Support multiple MDIO busses")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ethernet: mtk_eth_soc: out of bounds read in mtk_hwlro_get_fdir_entry()

[ Upstream commit e7e7104e2d5ddf3806a28695670f21bef471f1e1 ]

The "fsp->location" variable comes from user via ethtool_get_rxnfc().
Check that it is valid to prevent an out of bounds read.

Fixes: 7aab747e5563 ("net: ethernet: mediatek: add ethtool functions to configure RX flows of HW LRO")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clocksource/drivers/oxnas-rps: Fix irq_of_parse_and_map() return value

[ Upstream commit 9c04a8ff03def4df3f81219ffbe1ec9b44ff5348 ]

The irq_of_parse_and_map() returns 0 on failure, not a negative ERRNO.

Fixes: 89355274e1f7 ("clocksource/drivers/oxnas-rps: Add Oxford Semiconductor RPS Dual Timer")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220422104101.55754-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: dmi-sysfs: Fix memory leak in dmi_sysfs_register_handle

[ Upstream commit 660ba678f9998aca6db74f2dd912fa5124f0fa31 ]

kobject_init_and_add() takes reference even when it fails.
According to the doc of kobject_init_and_add()

   If this function returns an error, kobject_put() must be called to
   properly clean up the memory associated with the object.

Fix this issue by calling kobject_put().

Fixes: 948af1f0bbc8 ("firmware: Basic dmi-sysfs support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220511071421.9769-1-linmq006@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: st-asc: Sanitize CSIZE and correct PARENB for CS7

[ Upstream commit 52bb1cb7118564166b04d52387bd8403632f5190 ]

Only CS7 and CS8 seem supported but CSIZE is not sanitized from CS5 or
CS6 to CS8. In addition, ASC_CTL_MODE_7BIT_PAR suggests that CS7 has
to have parity, thus add PARENB.

Incorrect CSIZE results in miscalculation of the frame bits in
tty_get_char_size() or in its predecessor where the roughly the same
code is directly within uart_update_timeout().

Fixes: c4b058560762 (serial:st-asc: Add ST ASC driver.)
Cc: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220519081808.3776-8-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: sh-sci: Don't allow CS5-6

[ Upstream commit 9b87162de8be26bf3156460b37deee6399fd0fcb ]

Only CS7 and CS8 seem supported but CSIZE is not sanitized from
CS5 or CS6 to CS8.

Set CSIZE correctly so that userspace knows the effective value.
Incorrect CSIZE also results in miscalculation of the frame bits in
tty_get_char_size() or in its predecessor where the roughly the same
code is directly within uart_update_timeout().

Fixes: 1da177e4c3f4 (Linux-2.6.12-rc2)
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220519081808.3776-6-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: txx9: Don't allow CS5-6

[ Upstream commit 79ac88655dc0551e3571ad16bdabdbe65d61553e ]

Only CS7 and CS8 are supported but CSIZE is not sanitized with
CS5 or CS6 to CS8.

Set CSIZE correctly so that userspace knows the effective value.
Incorrect CSIZE also results in miscalculation of the frame bits in
tty_get_char_size() or in its predecessor where the roughly the same
code is directly within uart_update_timeout().

Fixes: 1da177e4c3f4 (Linux-2.6.12-rc2)
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220519081808.3776-5-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: digicolor-usart: Don't allow CS5-6

[ Upstream commit fd63031b8c0763addcecdefe0e0c59d49646204e ]

Only CS7 and CS8 seem supported but CSIZE is not sanitized to CS8 in
the default: block.

Set CSIZE correctly so that userspace knows the effective value.
Incorrect CSIZE also results in miscalculation of the frame bits in
tty_get_char_size() or in its predecessor where the roughly the same
code is directly within uart_update_timeout().

Fixes: 5930cb3511df (serial: driver for Conexant Digicolor USART)
Acked-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220519081808.3776-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: meson: acquire port->lock in startup()

[ Upstream commit 589f892ac8ef244e47c5a00ffd8605daa1eaef8e ]

The uart_ops startup() callback is called without interrupts
disabled and without port->lock locked, relatively late during the
boot process (from the call path of console_on_rootfs()). If the
device is a console, it was already previously registered and could
be actively printing messages.

Since the startup() callback is reading/writing registers used by
the console write() callback (AML_UART_CONTROL), its access must
be synchronized using the port->lock. Currently it is not.

The startup() callback is the only function that explicitly enables
interrupts. Without the synchronization, it is possible that
interrupts become accidentally permanently disabled.

CPU0                           CPU1
meson_serial_console_write     meson_uart_startup
--------------------------     ------------------
spin_lock(port->lock)
val = readl(AML_UART_CONTROL)
uart_console_write()
                               writel(INT_EN, AML_UART_CONTROL)
writel(val, AML_UART_CONTROL)
spin_unlock(port->lock)

Add port->lock synchronization to meson_uart_startup() to avoid
racing with meson_serial_console_write().

Also add detailed comments to meson_uart_reset() explaining why it
is *not* using port->lock synchronization.

Link: https://lore.kernel.org/lkml/2a82eae7-a256-f70c-fd82-4e510750906e@samsung.com
Fixes: ff7693d079e5 ("ARM: meson: serial: add MesonX SoC on-chip uart driver")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Link: https://lore.kernel.org/r/20220508103547.626355-1-john.ogness@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: mt6397: check return value after calling platform_get_resource()

[ Upstream commit d3b43eb505bffb8e4cdf6800c15660c001553fe6 ]

It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.

Fixes: fc2979118f3f ("rtc: mediatek: Add MT6397 RTC driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220505125043.1594771-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: rockchip: Fix refcount leak in rockchip_grf_init

[ Upstream commit 9b59588d8be91c96bfb0371e912ceb4f16315dbf ]

of_find_matching_node_and_match returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak.

Fixes: 4c58063d4258 ("soc: rockchip: add driver handling grf setup")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220516072013.19731-1-linmq006@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

coresight: cpu-debug: Replace mutex with mutex_trylock on panic notifier

[ Upstream commit 1adff542d67a2ed1120955cb219bfff8a9c53f59 ]

The panic notifier infrastructure executes registered callbacks when
a panic event happens - such callbacks are executed in atomic context,
with interrupts and preemption disabled in the running CPU and all other
CPUs disabled. That said, mutexes in such context are not a good idea.

This patch replaces a regular mutex with a mutex_trylock safer approach;
given the nature of the mutex used in the driver, it should be pretty
uncommon being unable to acquire such mutex in the panic path, hence
no functional change should be observed (and if it is, that would be
likely a deadlock with the regular mutex).

Fixes: 2227b7c74634 ("coresight: add support for CPU debug module")
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20220427224924.592546-10-gpiccoli@igalia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

rpmsg: qcom_smd: Fix irq_of_parse_and_map() return value

[ Upstream commit 1a358d35066487d228a68303d808bc4721c6b1b9 ]

The irq_of_parse_and_map() returns 0 on failure, not a negative ERRNO.

Fixes: 53e2822e56c7 ("rpmsg: Introduce Qualcomm SMD backend")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220422105326.78713-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

pwm: lp3943: Fix duty calculation in case period was clamped

[ Upstream commit 5e3b07ca5cc78cd4a987e78446849e41288d87cb ]

The hardware only supports periods <= 1.6 ms and if a bigger period is
requested it is clamped to 1.6 ms. In this case duty_cycle might be bigger
than 1.6 ms and then the duty cycle register is written with a value
bigger than LP3943_MAX_DUTY. So clamp duty_cycle accordingly.

Fixes: af66b3c0934e ("pwm: Add LP3943 PWM driver")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

USB: storage: karma: fix rio_karma_init return

[ Upstream commit b92ffb1eddd9a66a90defc556dcbf65a43c196c7 ]

The function rio_karam_init() should return -ENOMEM instead of
value 0 (USB_STOR_TRANSPORT_GOOD) when allocation fails.

Similarly, it should return -EIO when rio_karma_send_command() fails.

Fixes: dfe0d3ba20e8 ("USB Storage: add rio karma eject support")
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://lore.kernel.org/r/20220412144359.28447-1-linma@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: usbip: add missing device lock on tweak configuration cmd

[ Upstream commit d088fabace2ca337b275d1d4b36db4fe7771e44f ]

The function documentation of usb_set_configuration says that its
callers should hold the device lock. This lock is held for all
callsites except tweak_set_configuration_cmd. The code path can be
executed for example when attaching a remote USB device.
The solution is to surround the call by the device lock.

This bug was found using my experimental own-developed static analysis
tool, which reported the missing lock on v5.17.2. I manually verified
this bug report by doing code review as well. I runtime checked that
the required lock is not held. I compiled and runtime tested this on
x86_64 with a USB mouse. After applying this patch, my analyser no
longer reports this potential bug.

Fixes: 2c8c98158946 ("staging: usbip: let client choose device configuration")
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Link: https://lore.kernel.org/r/20220412165055.257113-1-dossche.niels@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: usbip: fix a refcount leak in stub_probe()

[ Upstream commit 9ec4cbf1cc55d126759051acfe328d489c5d6e60 ]

usb_get_dev() is called in stub_device_alloc(). When stub_probe() fails
after that, usb_put_dev() needs to be called to release the reference.

Fix this by moving usb_put_dev() to sdev_free error path handling.

Find this by code review.

Fixes: 3ff67445750a ("usbip: fix error handling in stub_probe()")
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Link: https://lore.kernel.org/r/20220412020257.9767-1-hbh25y@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: goldfish: Use tty_port_destroy() to destroy port

[ Upstream commit 507b05063d1b7a1fcb9f7d7c47586fc4f3508f98 ]

In goldfish_tty_probe(), the port initialized through tty_port_init()
should be destroyed in error paths.In goldfish_tty_remove(), qtty->port
also should be destroyed or else might leak resources.

Fix the above by calling tty_port_destroy().

Fixes: 666b7793d4bf ("goldfish: tty driver")
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Wang Weiyang <wangweiyang2@huawei.com>
Link: https://lore.kernel.org/r/20220328115844.86032-1-wangweiyang2@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: greybus: codecs: fix type confusion of list iterator variable

[ Upstream commit 84ef256550196bc06e6849a34224c998b45bd557 ]

If the list does not exit early then data == NULL and 'module' does not
point to a valid list element.
Using 'module' in such a case is not valid and was therefore removed.

Fixes: 6dd67645f22c ("greybus: audio: Use single codec driver registration")
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Link: https://lore.kernel.org/r/20220321123626.3068639-1-jakobkoschel@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pcmcia: db1xxx_ss: restrict to MIPS_DB1XXX boards

[ Upstream commit 3928cf08334ed895a31458cbebd8d4ec6d84c080 ]

When the MIPS_ALCHEMY board selection is MIPS_XXS1500 instead of
MIPS_DB1XXX, the PCMCIA driver 'db1xxx_ss' has build errors due
to missing DB1XXX symbols. The PCMCIA driver should be restricted
to MIPS_DB1XXX instead of MIPS_ALCHEMY to fix this build error.

ERROR: modpost: "bcsr_read" [drivers/pcmcia/db1xxx_ss.ko] undefined!
ERROR: modpost: "bcsr_mod" [drivers/pcmcia/db1xxx_ss.ko] undefined!

Fixes: 42a4f17dc356 ("MIPS: Alchemy: remove SOC_AU1X00 in favor of MIPS_ALCHEMY")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Kees Cook <keescook@chromium.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Acked-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables: disallow non-stateful expression in sets earlier

commit 520778042ccca019f3ffa136dd0ca565c486cedd upstream.

Since 3e135cd499bf ("netfilter: nft_dynset: dynamic stateful expression
instantiation"), it is possible to attach stateful expressions to set
elements.

cd5125d8f518 ("netfilter: nf_tables: split set destruction in deactivate
and destroy phase") introduces conditional destruction on the object to
accomodate transaction semantics.

nft_expr_init() calls expr->ops->init() first, then check for
NFT_STATEFUL_EXPR, this stills allows to initialize a non-stateful
lookup expressions which points to a set, which might lead to UAF since
the set is not properly detached from the set->binding for this case.
Anyway, this combination is non-sense from nf_tables perspective.

This patch fixes this problem by checking for NFT_STATEFUL_EXPR before
expr->ops->init() is called.

The reporter provides a KASAN splat and a poc reproducer (similar to
those autogenerated by syzbot to report use-after-free errors). It is
unknown to me if they are using syzbot or if they use similar automated
tool to locate the bug that they are reporting.

For the record, this is the KASAN splat.

[   85.431824] ==================================================================
[   85.432901] BUG: KASAN: use-after-free in nf_tables_bind_set+0x81b/0xa20
[   85.433825] Write of size 8 at addr ffff8880286f0e98 by task poc/776
[   85.434756]
[   85.434999] CPU: 1 PID: 776 Comm: poc Tainted: G        W         5.18.0+ #2
[   85.436023] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014

Fixes: 0b2d8a7b638b ("netfilter: nf_tables: add helper functions for expression handling")
Reported-and-tested-by: Aaron Adams <edg-e@nccgroup.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
[Ajay: Regenerated the patch for v4.14.y]
Signed-off-by: Ajay Kaher <akaher@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: IP27: Remove incorrect `cpu_has_fpu' override

commit 424c3781dd1cb401857585331eaaa425a13f2429 upstream.

Remove unsupported forcing of `cpu_has_fpu' to 1, which makes the `nofpu'
kernel parameter non-functional, and also causes a link error:

ld: arch/mips/kernel/traps.o: in function `trap_init':
./arch/mips/include/asm/msa.h:(.init.text+0x348): undefined reference to `handle_fpe'
ld: ./arch/mips/include/asm/msa.h:(.init.text+0x354): undefined reference to `handle_fpe'
ld: ./arch/mips/include/asm/msa.h:(.init.text+0x360): undefined reference to `handle_fpe'

where the CONFIG_MIPS_FP_SUPPORT configuration option has been disabled.

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Reported-by: Stephen Zhang <starzhangzsd@gmail.com>
Fixes: 0ebb2f4159af ("MIPS: IP27: Update/restructure CPU overrides")
Cc: stable@vger.kernel.org # v4.2+
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/rxe: Generate a completion for unsupported/invalid opcode

commit 2f917af777011c88e977b9b9a5d00b280d3a59ce upstream.

Current rxe_requester() doesn't generate a completion when processing an
unsupported/invalid opcode. If rxe driver doesn't support a new opcode
(e.g. RDMA Atomic Write) and RDMA library supports it, an application
using the new opcode can reproduce this issue. Fix the issue by calling
"goto err;".

Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20220410113513.27537-1-yangx.jy@fujitsu.com
Signed-off-by: Xiao Yang <yangx.jy@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

phy: qcom-qmp: fix reset-controller leak on probe errors

commit 4d2900f20edfe541f75756a00deeb2ffe7c66bc1 upstream.

Make sure to release the lane reset controller in case of a late probe
error (e.g. probe deferral).

Note that due to the reset controller being defined in devicetree in
"lane" child nodes, devm_reset_control_get_exclusive() cannot be used
directly.

Fixes: e78f3d15e115 ("phy: qcom-qmp: new qmp phy driver for qcom-chipsets")
Cc: stable@vger.kernel.org # 4.12
Cc: Vivek Gautam <vivek.gautam@codeaurora.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220427063243.32576-3-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: gpio: altera: correct interrupt-cells

commit 3a21c3ac93aff7b4522b152399df8f6a041df56d upstream.

update documentation to correctly state the interrupt-cells to be 2.

Cc: stable@vger.kernel.org
Fixes: 4fd9bbc6e071 ("drivers/gpio: Altera soft IP GPIO driver devicetree binding")
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

docs/conf.py: Cope with removal of language=None in Sphinx 5.0.0

commit 627f01eab93d8671d4e4afee9b148f9998d20e7c upstream.

One of the changes in Sphinx 5.0.0 [1] says [sic]:

    5.0.0 final

     - #10474: language does not accept None as it value.
       The default value of language becomes to 'en' now.

[1]: https://www.sphinx-doc.org/en/master/changes.html#release-5-0-0-released-may-30-2022

It results in a new warning from Sphinx 5.0.0 [sic]:

    WARNING: Invalid configuration value found: 'language = None'.
    Update your configuration to a valid langauge code. Falling
    back to 'en' (English).

Silence the warning by using 'en'.
It works with all the Sphinx versions required for building
kernel documentation (1.7.9 or later).

Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Link: https://lore.kernel.org/r/bd0c2ddc-2401-03cb-4526-79ca664e1cbe@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

phy: qcom-qmp: fix struct clk leak on probe errors

commit f0a4bc38a12f5a0cc5ad68670d9480e91e6a94df upstream.

Make sure to release the pipe clock reference in case of a late probe
error (e.g. probe deferral).

Fixes: e78f3d15e115 ("phy: qcom-qmp: new qmp phy driver for qcom-chipsets")
Cc: stable@vger.kernel.org # 4.12
Cc: Vivek Gautam <vivek.gautam@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220427063243.32576-2-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: qcom: ipq8074: fix the sleep clock frequency

commit f607dd767f5d6800ffbdce5b99ba81763b023781 upstream.

Sleep clock frequency should be 32768Hz. Lets fix it.

Cc: stable@vger.kernel.org
Fixes: 41dac73e243d ("arm64: dts: Add ipq8074 SoC and HK01 board support")
Link: https://lore.kernel.org/all/e2a447f8-6024-0369-f698-2027b6edcf9e@codeaurora.org/
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1644581655-11568-1-git-send-email-quic_kathirav@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gma500: fix an incorrect NULL check on list iterator

commit bdef417d84536715145f6dc9cc3275c46f26295a upstream.

The bug is here:
return crtc;

The list iterator value 'crtc' will *always* be set and non-NULL by
list_for_each_entry(), so it is incorrect to assume that the iterator
value will be NULL if the list is empty or no element is found.

To fix the bug, return 'crtc' when found, otherwise return NULL.

Cc: stable@vger.kernel.org
fixes: 89c78134cc54d ("gma500: Add Poulsbo support")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220327052028.2013-1-xiam0nd.tong@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

carl9170: tx: fix an incorrect use of list iterator

commit 54a6f29522da3c914da30e50721dedf51046449a upstream.

If the previous list_for_each_entry_continue_rcu() don't exit early
(no goto hit inside the loop), the iterator 'cvif' after the loop
will be a bogus pointer to an invalid structure object containing
the HEAD (&ar->vif_list). As a result, the use of 'cvif' after that
will lead to a invalid memory access (i.e., 'cvif->id': the invalid
pointer dereference when return back to/after the callsite in the
carl9170_update_beacon()).

The original intention should have been to return the valid 'cvif'
when found in list, NULL otherwise. So just return NULL when no
entry found, to fix this bug.

Cc: stable@vger.kernel.org
Fixes: 1f1d9654e183c ("carl9170: refactor carl9170_update_beacon")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220328122820.1004-1-xiam0nd.tong@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: rt5514: Fix event generation for "DSP Voice Wake Up" control

commit 4213ff556740bb45e2d9ff0f50d056c4e7dd0921 upstream.

The driver has a custom put function for "DSP Voice Wake Up" which does
not generate event notifications on change, instead returning 0. Since we
already exit early in the case that there is no change this can be fixed
by unconditionally returning 1 at the end of the function.

Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220428162444.3883147-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtl818x: Prevent using not initialized queues

commit 746285cf81dc19502ab238249d75f5990bd2d231 upstream.

Using not existing queues can panic the kernel with rtl8180/rtl8185 cards.
Ignore the skb priority for those cards, they only have one tx queue. Pierre
Asselin (pa@panix.com) reported the kernel crash in the Gentoo forum:

https://forums.gentoo.org/viewtopic-t-1147832-postdays-0-postorder-asc-start-25.html

He also confirmed that this patch fixes the issue. In summary this happened:

After updating wpa_supplicant from 2.9 to 2.10 the kernel crashed with a
"divide error: 0000" when connecting to an AP. Control port tx now tries to
use IEEE80211_AC_VO for the priority, which wpa_supplicants starts to use in
2.10.

Since only the rtl8187se part of the driver supports QoS, the priority
of the skb is set to IEEE80211_AC_BE (2) by mac80211 for rtl8180/rtl8185
cards.

rtl8180 is then unconditionally reading out the priority and finally crashes on
drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c line 544 without this
patch:
idx = (ring->idx + skb_queue_len(&ring->queue)) % ring->entries

"ring->entries" is zero for rtl8180/rtl8185 cards, tx_ring[2] never got
initialized.

Cc: stable@vger.kernel.org
Reported-by: pa@panix.com
Tested-by: pa@panix.com
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220422145228.7567-1-alexander@wetzel-home.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hugetlb: fix huge_pmd_unshare address update

commit 48381273f8734d28ef56a5bdf1966dd8530111bc upstream.

The routine huge_pmd_unshare() is passed a pointer to an address
associated with an area which may be unshared.  If unshare is successful
this address is updated to 'optimize' callers iterating over huge page
addresses.  For the optimization to work correctly, address should be
updated to the last huge page in the unmapped/unshared area.  However, in
the common case where the passed address is PUD_SIZE aligned, the address
is incorrectly updated to the address of the preceding huge page.  That
wastes CPU cycles as the unmapped/unshared range is scanned twice.

Link: https://lkml.kernel.org/r/20220524205003.126184-1-mike.kravetz@oracle.com
Fixes: 39dde65c9940 ("shared page table for hugetlb page")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nodemask.h: fix compilation error with GCC12

commit 37462a920392cb86541650a6f4121155f11f1199 upstream.

With gcc version 12.0.1 20220401 (Red Hat 12.0.1-0), building with
defconfig results in the following compilation error:

|   CC      mm/swapfile.o
| mm/swapfile.c: In function `setup_swap_info':
| mm/swapfile.c:2291:47: error: array subscript -1 is below array bounds
|  of `struct plist_node[]' [-Werror=array-bounds]
|  2291 |                                 p->avail_lists[i].prio = 1;
|       |                                 ~~~~~~~~~~~~~~^~~
| In file included from mm/swapfile.c:16:
| ./include/linux/swap.h:292:27: note: while referencing `avail_lists'
|   292 |         struct plist_node avail_lists[]; /*
|       |                           ^~~~~~~~~~~

This is due to the compiler detecting that the mask in
node_states[__state] could theoretically be zero, which would lead to
first_node() returning -1 through find_first_bit.

I believe that the warning/error is legitimate.  I first tried adding a
test to check that the node mask is not emtpy, since a similar test exists
in the case where MAX_NUMNODES == 1.

However, adding the if statement causes other warnings to appear in
for_each_cpu_node_but, because it introduces a dangling else ambiguity.
And unfortunately, GCC is not smart enough to detect that the added test
makes the case where (node) == -1 impossible, so it still complains with
the same message.

This is why I settled on replacing that with a harmless, but relatively
useless (node) >= 0 test.  Based on the warning for the dangling else, I
also decided to fix the case where MAX_NUMNODES == 1 by moving the
condition inside the for loop.  It will still only be tested once.  This
ensures that the meaning of an else following for_each_node_mask or
derivatives would not silently have a different meaning depending on the
configuration.

Link: https://lkml.kernel.org/r/20220414150855.2407137-3-dinechin@redhat.com
Signed-off-by: Christophe de Dinechin <christophe@dinechin.org>
Signed-off-by: Christophe de Dinechin <dinechin@redhat.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Ben Segall <bsegall@google.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/msm: Fix an incorrect NULL check on list iterator

commit 8b9ad480bd1dd25f4ff4854af5685fa334a2f57a upstream.

The bug is here:
if (!iommu || iommu->dev->of_node != spec->np) {

The list iterator value 'iommu' will *always* be set and non-NULL by
list_for_each_entry(), so it is incorrect to assume that the iterator
value will be NULL if the list is empty or no element is found (in fact,
it will point to a invalid structure object containing HEAD).

To fix the bug, use a new value 'iter' as the list iterator, while use
the old value 'iommu' as a dedicated variable to point to the found one,
and remove the unneeded check for 'iommu->dev->of_node != spec->np'
outside the loop.

Cc: stable@vger.kernel.org
Fixes: f78ebca8ff3d6 ("iommu/msm: Add support for generic master bindings")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Link: https://lore.kernel.org/r/20220501132823.12714-1-xiam0nd.tong@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

um: Fix out-of-bounds read in LDT setup

commit 2a4a62a14be1947fa945c5c11ebf67326381a568 upstream.

syscall_stub_data() expects the data_count parameter to be the number of
longs, not bytes.

 ==================================================================
 BUG: KASAN: stack-out-of-bounds in syscall_stub_data+0x70/0xe0
 Read of size 128 at addr 000000006411f6f0 by task swapper/1

 CPU: 0 PID: 1 Comm: swapper Not tainted 5.18.0+ #18
 Call Trace:
  show_stack.cold+0x166/0x2a7
  __dump_stack+0x3a/0x43
  dump_stack_lvl+0x1f/0x27
  print_report.cold+0xdb/0xf81
  kasan_report+0x119/0x1f0
  kasan_check_range+0x3a3/0x440
  memcpy+0x52/0x140
  syscall_stub_data+0x70/0xe0
  write_ldt_entry+0xac/0x190
  init_new_ldt+0x515/0x960
  init_new_context+0x2c4/0x4d0
  mm_init.constprop.0+0x5ed/0x760
  mm_alloc+0x118/0x170
  0x60033f48
  do_one_initcall+0x1d7/0x860
  0x60003e7b
  kernel_init+0x6e/0x3d4
  new_thread_handler+0x1e7/0x2c0

 The buggy address belongs to stack of task swapper/1
  and is located at offset 64 in frame:
  init_new_ldt+0x0/0x960

 This frame has 2 objects:
  [32, 40) 'addr'
  [64, 80) 'desc'
 ==================================================================

Fixes: 858259cf7d1c443c83 ("uml: maintain own LDT entries")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Cc: stable@vger.kernel.org
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

um: chan_user: Fix winch_tramp() return value

commit 57ae0b67b747031bc41fb44643aa5344ab58607e upstream.

The previous fix here was only partially correct, it did
result in returning a proper error value in case of error,
but it also clobbered the pid that we need to return from
this function (not just zero for success).

As a result, it returned 0 here, but later this is treated
as a pid and used to kill the process, but since it's now
0 we kill(0, SIGKILL), which makes UML kill itself rather
than just the helper thread.

Fix that and make it more obvious by using a separate
variable for the pid.

Fixes: ccf1236ecac4 ("um: fix error return code in winch_tramp()")
Reported-and-tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: upgrade passive scan to active scan on DFS channels after beacon rx

commit b041b7b9de6e1d4362de855ab90f9d03ef323edd upstream.

In client mode, we can't connect to hidden SSID APs or SSIDs not advertised
in beacons on DFS channels, since we're forced to passive scan. Fix this by
sending out a probe request immediately after the first beacon, if active
scan was requested by the user.

Cc: stable@vger.kernel.org
Reported-by: Catrinel Catrinescu <cc@80211.de>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20220420104907.36275-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>