GitHub/moto-9609/android_kernel_motorola_exynos9610.git
12 years agoARM: OMAP4: PM: Program CPU1 to hit OFF when off-lined
Santosh Shilimkar [Wed, 16 Jun 2010 16:49:48 +0000 (22:19 +0530)]
ARM: OMAP4: PM: Program CPU1 to hit OFF when off-lined

Program non-boot CPUs to hit lowest supported power state
when it is off-lined using cpu hotplug framework.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Jean Pihet <j-pihet@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Tested-by: Vishwanath BS <vishwanath.bs@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
12 years agoARM: OMAP4: Remove __INIT from omap_secondary_startup() to re-use it for hotplug.
Santosh Shilimkar [Sun, 4 Sep 2011 07:40:32 +0000 (13:10 +0530)]
ARM: OMAP4: Remove __INIT from omap_secondary_startup() to re-use it for hotplug.

Remove the __INIT from omap_secondary_startup() so that it can
be re-used for CPU hotplug.

While at this, remove the un-used AUXBOOT register reference.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Jean Pihet <j-pihet@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Tested-by: Vishwanath BS <vishwanath.bs@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
12 years agoARM: OMAP4: PM: Add CPUX OFF mode support
Santosh Shilimkar [Wed, 16 Jun 2010 16:49:48 +0000 (22:19 +0530)]
ARM: OMAP4: PM: Add CPUX OFF mode support

This patch adds the CPU0 and CPU1 off mode support. CPUX close switch
retention (CSWR) is not supported by hardware design.

The CPUx OFF mode isn't supported on OMAP4430 ES1.0

CPUx sleep code is common for hotplug, suspend and CPUilde.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Jean Pihet <j-pihet@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Tested-by: Vishwanath BS <vishwanath.bs@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
12 years agoARM: OMAP4: PM: Add WakeupGen module as OMAP gic_arch_extn
Santosh Shilimkar [Wed, 16 Jun 2010 16:49:47 +0000 (22:19 +0530)]
ARM: OMAP4: PM: Add WakeupGen module as OMAP gic_arch_extn

OMAP WakeupGen is the interrupt controller extension used along
with ARM GIC to wake the CPU out from low power states on
external interrupts.

The WakeupGen unit is responsible for generating the wakeup event
from the incoming interrupts and enable bits. It is implemented
in the MPU always ON power domain. During normal operation,
WakeupGen delivers the external interrupts directly to the GIC.

WakeupGen specification has one restriction as per Veyron version 1.6.
It is SW responsibility to program interrupt enabling/disabling
coherently in the GIC and in the WakeupGen enable registers. That is, a
given interrupt for a given CPU is either enable at both GIC and WakeupGen,
or disable at both, but no mix. That's the reason the WakeupGen is
implemented as an extension of GIC.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Jean Pihet <j-pihet@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Tested-by: Vishwanath BS <vishwanath.bs@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
12 years agoARM: OMAP: PM: Add support to allocate the memory for secure RAM
Santosh Shilimkar [Mon, 6 Jun 2011 14:58:23 +0000 (20:28 +0530)]
ARM: OMAP: PM: Add support to allocate the memory for secure RAM

Allocate the memory to save secure ram context which needs
to be done when MPU is hitting OFF mode.

The ROM code expects a physical address to this memory
and hence use memblock APIs to reserve this memory as part
of .reserve() callback. Maximum size as per secure RAM requirements
is allocated.

To keep omap1 build working, omap-secure.h file is created
under plat-omap directory.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Jean Pihet <j-pihet@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Tested-by: Vishwanath BS <vishwanath.bs@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
12 years agoARM: OMAP: Add Secure HAL and monitor mode API infrastructure.
Santosh Shilimkar [Mon, 6 Jun 2011 12:26:49 +0000 (17:56 +0530)]
ARM: OMAP: Add Secure HAL and monitor mode API infrastructure.

On OMAP secure/emulation devices, certain APIs are exported by secure
code. Add an infrastructure so that relevant operations on secure
devices can be implemented using it.

While at this, rename omap44xx-smc.S to omap-smc.S since the common APIs
can be used on other OMAP's too.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Jean Pihet <j-pihet@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Tested-by: Vishwanath BS <vishwanath.bs@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
12 years agoARM: OMAP4: PM: Initialise all the clockdomains to supported states
Santosh Shilimkar [Wed, 5 Jan 2011 16:33:17 +0000 (22:03 +0530)]
ARM: OMAP4: PM: Initialise all the clockdomains to supported states

Initialise hardware supervised mode for all clockdomains if it's
supported. Initiate sleep transition for other clockdomains,
if they are not being used.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Acked-by: Jean Pihet <j-pihet@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Tested-by: Vishwanath BS <vishwanath.bs@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
12 years agoARM: OMAP4: PM: Avoid omap4_pm_init() on OMAP4430 ES1.0
Santosh Shilimkar [Fri, 11 Mar 2011 10:43:09 +0000 (16:13 +0530)]
ARM: OMAP4: PM: Avoid omap4_pm_init() on OMAP4430 ES1.0

On OMAP4430 ES1.0, Power Management features are not supported.
Avoid omap4_pm_init() on ES1.0 silicon so that we can continue
to use same kernel binary to boot on all OMAP4 silicons.

The ES1.0 boot failure with OMAP4 PM series was because of
the clockdomain initialisation code. Hardware supervised
clockdomain mode isn't functional for all clockdomains
on OMAP4430 ES1.0 silicon so avoid the same.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reported-by: Kevin Hilman <khilman@ti.com>
Acked-by: Jean Pihet <j-pihet@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Tested-by: Vishwanath BS <vishwanath.bs@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
12 years agoARM: OMAP4: PM: Keep static dep between MPUSS-EMIF and MPUSS-L3/L4 and DUCATI-L3
Santosh Shilimkar [Tue, 8 Mar 2011 12:54:30 +0000 (18:24 +0530)]
ARM: OMAP4: PM: Keep static dep between MPUSS-EMIF and MPUSS-L3/L4 and DUCATI-L3

As per OMAP4430 TRM, the dynamic dependency between MPUSS -> EMIF
and MPUSS -> L4PER/L3_* and DUCATI -> L3_* clockdomains is enable
by default. Refer register CM_MPU_DYNAMICDEP description for details.

But these dynamic dependencies doesn't work as expected. The hardware
recommendation is to enable static dependencies for above clockdomains.
Without this, system locks up or randomly crashes.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Paul Walmsley <paul@pwsan.com>
Acked-by: Jean Pihet <j-pihet@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Tested-by: Vishwanath BS <vishwanath.bs@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
12 years agoARM: OMAP4: PM: Add SAR RAM support
Santosh Shilimkar [Sat, 1 Jan 2011 14:26:04 +0000 (19:56 +0530)]
ARM: OMAP4: PM: Add SAR RAM support

This patch adds SAR RAM support on OMAP4430. SAR RAM used to save
and restore the HW context in low power modes.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Jean Pihet <j-pihet@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Tested-by: Vishwanath BS <vishwanath.bs@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
12 years agoARM: OMAP4: Export omap4_get_base*() rather than global address pointers
Santosh Shilimkar [Thu, 3 Mar 2011 12:33:25 +0000 (18:03 +0530)]
ARM: OMAP4: Export omap4_get_base*() rather than global address pointers

This patch exports APIs to get base address for GIC
distributor, CPU interface, SCU and PL310 L2 Cache which
are used in OMAP4 PM code.

This was suggested by Kevin Hilman <khilman@ti.com> during
OMAP4 PM code review.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Jean Pihet <j-pihet@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Tested-by: Vishwanath BS <vishwanath.bs@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
12 years agoARM: OMAP4: Use WARN_ON() instead of BUG_ON() with graceful exit
Santosh Shilimkar [Thu, 3 Mar 2011 12:06:52 +0000 (17:36 +0530)]
ARM: OMAP4: Use WARN_ON() instead of BUG_ON() with graceful exit

OMAP4 L2X0 initialisation code uses BUG_ON() for the ioremap()
failure scenarios.

Use WARN_ON() instead and allow graceful function exits.

This was suggsted by Kevin Hilman <khilman@ti.com> during
OMAP4 PM code review.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Jean Pihet <j-pihet@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Tested-by: Vishwanath BS <vishwanath.bs@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
12 years agoARM: 7194/1: OMAP: Fix build after a merge between v3.2-rc4 and ARM restart changes
Tony Lindgren [Tue, 6 Dec 2011 16:50:42 +0000 (17:50 +0100)]
ARM: 7194/1: OMAP: Fix build after a merge between v3.2-rc4 and ARM restart changes

ARM restart changes needed changes to common.h to make it local.
This conflicted with v3.2-rc4 DSS related hwmod changes that
git mergetool was not able to handle.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
12 years agoARM: 7192/1: OMAP: Fix build error for omap1_defconfig
Tony Lindgren [Tue, 6 Dec 2011 04:45:37 +0000 (05:45 +0100)]
ARM: 7192/1: OMAP: Fix build error for omap1_defconfig

Otherwise we get the following error:

In function 'omap_init_consistent_dma_size':
error: implicit declaration of function 'init_consistent_dma_size'

Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
12 years agoMerge branch 'vmalloc' of git://git.linaro.org/people/nico/linux into devel-stable
Russell King [Mon, 5 Dec 2011 23:27:54 +0000 (23:27 +0000)]
Merge branch 'vmalloc' of git://git.linaro.org/people/nico/linux into devel-stable

12 years agoMerge branch 'for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux...
Russell King [Mon, 5 Dec 2011 23:20:17 +0000 (23:20 +0000)]
Merge branch 'for-rmk' of git://git./linux/kernel/git/will/linux into devel-stable

Conflicts:
arch/arm/common/gic.c
arch/arm/plat-omap/include/plat/common.h

12 years agoARM: 7189/1: OMAP3: Fix build break in cpuidle34xx.c because of irq function
Santosh Shilimkar [Mon, 5 Dec 2011 08:46:24 +0000 (09:46 +0100)]
ARM: 7189/1: OMAP3: Fix build break in cpuidle34xx.c because of irq function

Fix the below build break by including common.h

arch/arm/mach-omap2/cpuidle34xx.c: In function 'omap3_enter_idle':
arch/arm/mach-omap2/cpuidle34xx.c:117: error: implicit declaration of function 'omap_irq_pending'
make[1]: *** [arch/arm/mach-omap2/cpuidle34xx.o] Error 1
make: *** [arch/arm/mach-omap2] Error 2

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
12 years agoARM: 7188/1: OMAP2PLUS: Fix build error: 'omap2/omap3_intc_handle_irq' undeclared.
Santosh Shilimkar [Mon, 5 Dec 2011 08:44:58 +0000 (09:44 +0100)]
ARM: 7188/1: OMAP2PLUS: Fix build error: 'omap2/omap3_intc_handle_irq' undeclared.

Fix the build break by adding the necessary irq functions to
common header.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
12 years agoMerge branch 'irqchip-consolidation' of git://git.kernel.org/pub/scm/linux/kernel...
Russell King [Sat, 3 Dec 2011 09:11:54 +0000 (09:11 +0000)]
Merge branch 'irqchip-consolidation' of git://git./linux/kernel/git/maz/arm-platforms into devel-stable

12 years agoMerge branches 'perf/event-nos', 'perf/updates' and 'perf/omap4' into for-rmk
Will Deacon [Fri, 2 Dec 2011 15:22:18 +0000 (15:22 +0000)]
Merge branches 'perf/event-nos', 'perf/updates' and 'perf/omap4' into for-rmk

12 years agoarm: pmu: allow platform specific irq enable/disable handling
Ming Lei [Wed, 2 Mar 2011 07:00:08 +0000 (15:00 +0800)]
arm: pmu: allow platform specific irq enable/disable handling

This patch introduces .enable_irq and .disable_irq into
struct arm_pmu_platdata, so platform specific irq enablement
can be handled after request_irq, and platform specific irq
disablement can be handled before free_irq.

This patch is for support of  pmu irq routed from CTI on omap4.

Acked-by: Jean Pihet <j-pihet@ti.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
12 years agoarm: introduce cross trigger interface helpers
Ming Lei [Mon, 24 Oct 2011 14:45:53 +0000 (15:45 +0100)]
arm: introduce cross trigger interface helpers

OMAP4 uses cross trigger interface(CTI) to route
performance monitor irq to GIC, so introduce cti
helpers to make access for cti easily.

Acked-by: Jean Pihet <j-pihet@ti.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
12 years agoARM: perf: remove unused armpmu_get_max_events
Will Deacon [Mon, 14 Nov 2011 10:33:05 +0000 (10:33 +0000)]
ARM: perf: remove unused armpmu_get_max_events

armpmu_get_max_events is only called from perf_num_counters, so we can
inline it there. It existed as a separate entity as a hangover from
the original perf-based oprofile implementation.

Signed-off-by: Will Deacon <will.deacon@arm.com>
12 years agoARM: perf: add support for stalled cycle ABI events
Will Deacon [Thu, 29 Sep 2011 17:23:39 +0000 (18:23 +0100)]
ARM: perf: add support for stalled cycle ABI events

Commit 8f622422 ("perf events: Add generic front-end and back-end
stalled cycle event definitions") added two new ABI events for counting
stalled cycles.

This patch adds support for these new events to the ARM perf
implementation.

Cc: Jamie Iles <jamie@jamieiles.com>
Cc: Jean Pihet <j-pihet@ti.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
12 years agoARM: perf: clean and update ARMv7 event numbers
Will Deacon [Thu, 29 Sep 2011 14:29:02 +0000 (15:29 +0100)]
ARM: perf: clean and update ARMv7 event numbers

This patch updates the ARMv7 perf event numbers so that:

(1) A consistent naming scheme is used between different CPUs.

(2) Only events actually used by Linux are described.

(3) Where possible, architected events are used in preference to
    CPU-specific events.

This results in the removal of a load of unused, hardcoded data and
makes it more clear as to which events are supported on each PMU.

Cc: Jean Pihet <j-pihet@ti.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
12 years agoARM: exynos4: Fix build error
Axel Lin [Thu, 1 Dec 2011 15:25:45 +0000 (23:25 +0800)]
ARM: exynos4: Fix build error

Trivial fix to fix below build error:

  CC      arch/arm/mach-exynos/mach-universal_c210.o
arch/arm/mach-exynos/mach-universal_c210.c:24: error: expected identifier or '(' before '<' token

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
12 years agoARM: exynos4: Fix build error due to 'gic_bank_offset' undeclared
Axel Lin [Thu, 1 Dec 2011 15:24:30 +0000 (23:24 +0800)]
ARM: exynos4: Fix build error due to 'gic_bank_offset' undeclared

Fix below build error:
  CC      arch/arm/mach-exynos/cpu.o
arch/arm/mach-exynos/cpu.c: In function 'exynos4_init_irq':
arch/arm/mach-exynos/cpu.c:245: error: 'gic_bank_offset' undeclared (first use in this function)
arch/arm/mach-exynos/cpu.c:245: error: (Each undeclared identifier is reported only once
arch/arm/mach-exynos/cpu.c:245: error: for each function it appears in.)
arch/arm/mach-exynos/cpu.c:243: warning: unused variable 'bank_offset'
make[1]: *** [arch/arm/mach-exynos/cpu.o] Error 1
make: *** [arch/arm/mach-exynos] Error 2

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
12 years agoLinux 3.2-rc4
Linus Torvalds [Thu, 1 Dec 2011 22:56:01 +0000 (14:56 -0800)]
Linux 3.2-rc4

12 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec...
Linus Torvalds [Thu, 1 Dec 2011 22:55:34 +0000 (14:55 -0800)]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jlbec/ocfs2

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: (31 commits)
  ocfs2: avoid unaligned access to dqc_bitmap
  ocfs2: Use filemap_write_and_wait() instead of write_inode_now()
  ocfs2: honor O_(D)SYNC flag in fallocate
  ocfs2: Add a missing journal credit in ocfs2_link_credits() -v2
  ocfs2: send correct UUID to cleancache initialization
  ocfs2: Commit transactions in error cases -v2
  ocfs2: make direntry invalid when deleting it
  fs/ocfs2/dlm/dlmlock.c: free kmem_cache_zalloc'd data using kmem_cache_free
  ocfs2: Avoid livelock in ocfs2_readpage()
  ocfs2: serialize unaligned aio
  ocfs2: Implement llseek()
  ocfs2: Fix ocfs2_page_mkwrite()
  ocfs2: Add comment about orphan scanning
  ocfs2: Clean up messages in the fs
  ocfs2/cluster: Cluster up now includes network connections too
  ocfs2/cluster: Add new function o2net_fill_node_map()
  ocfs2/cluster: Fix output in file elapsed_time_in_ms
  ocfs2/dlm: dlmlock_remote() needs to account for remastery
  ocfs2/dlm: Take inflight reference count for remotely mastered resources too
  ocfs2/dlm: Cleanup dlm_wait_for_node_death() and dlm_wait_for_node_recovery()
  ...

12 years agoocfs2: avoid unaligned access to dqc_bitmap
Akinobu Mita [Tue, 15 Nov 2011 22:56:34 +0000 (14:56 -0800)]
ocfs2: avoid unaligned access to dqc_bitmap

The dqc_bitmap field of struct ocfs2_local_disk_chunk is 32-bit aligned,
but not 64-bit aligned.  The dqc_bitmap is accessed by ocfs2_set_bit(),
ocfs2_clear_bit(), ocfs2_test_bit(), or ocfs2_find_next_zero_bit().  These
are wrapper macros for ext2_*_bit() which need to take an unsigned long
aligned address (though some architectures are able to handle unaligned
address correctly)

So some 64bit architectures may not be able to access the dqc_bitmap
correctly.

This avoids such unaligned access by using another wrapper functions for
ext2_*_bit().  The code is taken from fs/ext4/mballoc.c which also need to
handle unaligned bitmap access.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
12 years agoMerge branch 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur...
Linus Torvalds [Thu, 1 Dec 2011 19:53:54 +0000 (11:53 -0800)]
Merge branch 'fixes' of ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm

* 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm:
  ARM: 7182/1: ARM cpu topology: fix warning
  ARM: 7181/1: Restrict kprobes probing SWP instructions to ARMv5 and below
  ARM: 7180/1: Change kprobes testcase with unpredictable STRD instruction
  ARM: 7177/1: GIC: avoid skipping non-existent PPIs in irq_start calculation
  ARM: 7176/1: cpu_pm: register GIC PM notifier only once
  ARM: 7175/1: add subname parameter to mfp_set_groupg callers
  ARM: 7174/1: Fix build error in kprobes test code on Thumb2 kernels
  ARM: 7172/1: dma: Drop GFP_COMP for DMA memory allocations
  ARM: 7171/1: unwind: add unwind directives to bitops assembly macros
  ARM: 7170/2: fix compilation breakage in entry-armv.S
  ARM: 7168/1: use cache type functions for arch_get_unmapped_area
  ARM: perf: check that we have a platform device when reserving PMU
  ARM: 7166/1: Use PMD_SHIFT instead of PGDIR_SHIFT in dma-consistent.c
  ARM: 7165/2: PL330: Fix typo in _prepare_ccr()
  ARM: 7163/2: PL330: Only register usable channels
  ARM: 7162/1: errata: tidy up Kconfig options for PL310 errata workarounds
  ARM: 7161/1: errata: no automatic store buffer drain
  ARM: perf: initialise used_mask for fake PMU during validation
  ARM: PMU: remove pmu_init declaration
  ARM: PMU: re-export release_pmu symbol to modules

12 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux...
Linus Torvalds [Thu, 1 Dec 2011 16:28:53 +0000 (08:28 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mason/linux-btrfs

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: fix meta data raid-repair merge problem
  Btrfs: skip allocation attempt from empty cluster
  Btrfs: skip block groups without enough space for a cluster
  Btrfs: start search for new cluster at the beginning
  Btrfs: reset cluster's max_size when creating bitmap
  Btrfs: initialize new bitmaps' list
  Btrfs: fix oops when calling statfs on readonly device
  Btrfs: Don't error on resizing FS to same size
  Btrfs: fix deadlock on metadata reservation when evicting a inode
  Fix URL of btrfs-progs git repository in docs
  btrfs scrub: handle -ENOMEM from init_ipath()

12 years agoBtrfs: fix meta data raid-repair merge problem
Jan Schmidt [Thu, 1 Dec 2011 14:30:36 +0000 (09:30 -0500)]
Btrfs: fix meta data raid-repair merge problem

Commit 4a54c8c16 introduced raid-repair, killing the individual
readpage_io_failed_hook entries from inode.c and disk-io.c. Commit
4bb31e92 introduced new readahead code, adding a readpage_io_failed_hook to
disk-io.c.

The raid-repair commit had logic to disable raid-repair, if
readpage_io_failed_hook is set. Thus, the readahead commit effectively
disabled raid-repair for meta data.

This commit changes the logic to always attempt raid-repair when needed and
call the readpage_io_failed_hook in case raid-repair fails. This is much
more straight forward and should have been like that from the beginning.

Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Reported-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
12 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland...
Linus Torvalds [Thu, 1 Dec 2011 00:25:02 +0000 (16:25 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/roland/infiniband

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB: Fix RCU lockdep splats
  IB/ipoib: Prevent hung task or softlockup processing multicast response
  IB/qib: Fix over-scheduling of QSFP work
  RDMA/cxgb4: Fix retry with MPAv1 logic for MPAv2
  RDMA/cxgb4: Fix iw_cxgb4 count_rcqes() logic
  IB/qib: Don't use schedule_work()

12 years agoMerge branch 'dt-for-linus' of git://sources.calxeda.com/kernel/linux
Linus Torvalds [Thu, 1 Dec 2011 00:24:43 +0000 (16:24 -0800)]
Merge branch 'dt-for-linus' of git://sources.calxeda.com/kernel/linux

* 'dt-for-linus' of git://sources.calxeda.com/kernel/linux:
  of: Add Silicon Image vendor prefix
  of/irq: of_irq_init: add check for parent equal to child node

12 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie...
Linus Torvalds [Thu, 1 Dec 2011 00:24:24 +0000 (16:24 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/broonie/regulator

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: twl: fix twl4030 support for smps regulators
  regulator: fix use after free bug
  regulator: aat2870: Fix the logic of checking if no id is matched in aat2870_get_regulator

12 years agoMerge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Linus Torvalds [Thu, 1 Dec 2011 00:23:59 +0000 (16:23 -0800)]
Merge branch 'fixes' of git://git./linux/kernel/git/arm/arm-soc

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (45 commits)
  ARM: ux500: update defconfig
  ARM: u300: update defconfig
  ARM: at91: enable additional boards in existing soc defconfig files
  ARM: at91: refresh soc defconfig files for 3.2
  ARM: at91: rename defconfig files appropriately
  ARM: OMAP2+: Fix Compilation error when omap_l3_noc built as module
  ARM: OMAP2+: Remove empty io.h
  ARM: OMAP2: select ARM_AMBA if OMAP3_EMU is defined
  ARM: OMAP: smartreflex: fix IRQ handling bug
  ARM: OMAP: PM: only register TWL with voltage layer when device is present
  ARM: OMAP: hwmod: Fix the addr space, irq, dma count APIs
  arm: mx28: fix bit operation in clock setting
  ARM: imx: export imx_ioremap
  ARM: imx/mm-imx3: conditionally compile i.MX31 and i.MX35 code
  ARM: mx5: Fix checkpatch warnings in cpu-imx5.c
  MAINTAINERS: Add missing directory
  ARM: imx: drop 'ARCH_MX31' and 'ARCH_MX35'
  ARM: imx6q: move clock register map to machine_desc.map_io
  ARM: pxa168/gplugd: add the correct SSP device
  ARM: Update mach-types to fix mxs build breakage
  ...

12 years agoARM: 7182/1: ARM cpu topology: fix warning
Vincent Guittot [Tue, 29 Nov 2011 14:50:20 +0000 (15:50 +0100)]
ARM: 7182/1: ARM cpu topology: fix warning

kernel/sched.c:7354:2: warning: initialization from incompatible pointer type

Align cpu_coregroup_mask prototype interface with sched_domain_mask_f typedef
use int cpu instead of unsigned int cpu

Cc: <stable@vger.kernel.org>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
12 years agoARM: 7181/1: Restrict kprobes probing SWP instructions to ARMv5 and below
Jon Medhurst (Tixy) [Tue, 29 Nov 2011 07:16:02 +0000 (08:16 +0100)]
ARM: 7181/1: Restrict kprobes probing SWP instructions to ARMv5 and below

The SWP instruction is deprecated on ARMv6 and with ARMv7 it will be
UNDEFINED when CONFIG_SWP_EMULATE is selected. In this case, probing a
SWP instruction will cause an oops when the kprobes emulation code
executes an undefined instruction.

As the SWP instruction should be rare or non-existent in kernels for
ARMv6 and later, we can simply avoid these problems by not allowing
probing of these.

Reported-by: Leif Lindholm <leif.lindholm@arm.com>
Tested-by: Leif Lindholm <leif.lindholm@arm.com>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
12 years agoARM: 7180/1: Change kprobes testcase with unpredictable STRD instruction
Jon Medhurst (Tixy) [Tue, 29 Nov 2011 07:14:35 +0000 (08:14 +0100)]
ARM: 7180/1: Change kprobes testcase with unpredictable STRD instruction

There is a kprobes testcase for the instruction "strd r2, [r3], r4".
This has unpredictable behaviour as it uses r3 for register writeback
addressing and also stores it to memory.

On a cortex A9, this testcase would fail because the instruction writes
the updated value of r3 to memory, whereas the kprobes emulation code
writes the original value.

Fix this by changing testcase to used r5 instead of r3.

Reported-by: Leif Lindholm <leif.lindholm@arm.com>
Tested-by: Leif Lindholm <leif.lindholm@arm.com>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
12 years agoBtrfs: skip allocation attempt from empty cluster
Alexandre Oliva [Wed, 30 Nov 2011 18:43:00 +0000 (13:43 -0500)]
Btrfs: skip allocation attempt from empty cluster

If we don't have a cluster, don't bother trying to allocate from it,
jumping right away to the attempt to allocate a new cluster.

Signed-off-by: Alexandre Oliva <oliva@lsd.ic.unicamp.br>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
12 years agoBtrfs: skip block groups without enough space for a cluster
Alexandre Oliva [Wed, 30 Nov 2011 18:43:00 +0000 (13:43 -0500)]
Btrfs: skip block groups without enough space for a cluster

We test whether a block group has enough free space to hold the
requested block, but when we're doing clustered allocation, we can
save some cycles by testing whether it has enough room for the cluster
upfront, otherwise we end up attempting to set up a cluster and
failing.  Only in the NO_EMPTY_SIZE loop do we attempt an unclustered
allocation, and by then we'll have zeroed the cluster size, so this
patch won't stop us from using the block group as a last resort.

Signed-off-by: Alexandre Oliva <oliva@lsd.ic.unicamp.br>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
12 years agoBtrfs: start search for new cluster at the beginning
Alexandre Oliva [Wed, 30 Nov 2011 18:43:00 +0000 (13:43 -0500)]
Btrfs: start search for new cluster at the beginning

Instead of starting at zero (offset is always zero), request a cluster
starting at search_start, that denotes the beginning of the current
block group.

Signed-off-by: Alexandre Oliva <oliva@lsd.ic.unicamp.br>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
12 years agoBtrfs: reset cluster's max_size when creating bitmap
Alexandre Oliva [Wed, 30 Nov 2011 18:43:00 +0000 (13:43 -0500)]
Btrfs: reset cluster's max_size when creating bitmap

The field that indicates the size of the largest contiguous chunk of
free space in the cluster is not initialized when setting up bitmaps,
it's only increased when we find a larger contiguous chunk.  We end up
retaining a larger value than appropriate for highly-fragmented
clusters, which may cause pointless searches for large contiguous
groups, and even cause clusters that do not meet the density
requirements to be set up.

Signed-off-by: Alexandre Oliva <oliva@lsd.ic.unicamp.br>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
12 years agoBtrfs: initialize new bitmaps' list
Alexandre Oliva [Mon, 28 Nov 2011 14:04:43 +0000 (12:04 -0200)]
Btrfs: initialize new bitmaps' list

We're failing to create clusters with bitmaps because
setup_cluster_no_bitmap checks that the list is empty before inserting
the bitmap entry in the list for setup_cluster_bitmap, but the list
field is only initialized when it is restored from the on-disk free
space cache, or when it is written out to disk.

Besides a potential race condition due to the multiple use of the list
field, filesystem performance severely degrades over time: as we use
up all non-bitmap free extents, the try-to-set-up-cluster dance is
done at every metadata block allocation.  For every block group, we
fail to set up a cluster, and after failing on them all up to twice,
we fall back to the much slower unclustered allocation.

To make matters worse, before the unclustered allocation, we try to
create new block groups until we reach the 1% threshold, which
introduces additional bitmaps and thus block groups that we'll iterate
over at each metadata block request.

12 years agoBtrfs: fix oops when calling statfs on readonly device
Li Zefan [Mon, 28 Nov 2011 08:43:00 +0000 (16:43 +0800)]
Btrfs: fix oops when calling statfs on readonly device

To reproduce this bug:

  # dd if=/dev/zero of=img bs=1M count=256
  # mkfs.btrfs img
  # losetup -r /dev/loop1 img
  # mount /dev/loop1 /mnt
  OOPS!!

It triggered BUG_ON(!nr_devices) in btrfs_calc_avail_data_space().

To fix this, instead of checking write-only devices, we check all open
deivces:

  # df -h /dev/loop1
  Filesystem            Size  Used Avail Use% Mounted on
  /dev/loop1            250M   28K  238M   1% /mnt

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
12 years agoBtrfs: Don't error on resizing FS to same size
Mike Fleetwood [Fri, 18 Nov 2011 18:55:01 +0000 (18:55 +0000)]
Btrfs: Don't error on resizing FS to same size

It seems overly harsh to fail a resize of a btrfs file system to the
same size when a shrink or grow would succeed.  User app GParted trips
over this error.  Allow it by bypassing the shrink or grow operation.

Signed-off-by: Mike Fleetwood <mike.fleetwood@googlemail.com>
12 years agoBtrfs: fix deadlock on metadata reservation when evicting a inode
Miao Xie [Fri, 18 Nov 2011 09:43:00 +0000 (17:43 +0800)]
Btrfs: fix deadlock on metadata reservation when evicting a inode

When I ran the xfstests, I found the test tasks was blocked on meta-data
reservation.

By debugging, I found the reason of this bug:
   start transaction
        |
v
   reserve meta-data space
|
v
   flush delay allocation -> iput inode -> evict inode
^ |
| v
   wait for delay allocation flush <- reserve meta-data space

And besides that, the flush on evicting inode will block the thread, which
is reclaiming the memory, and make oom happen easily.

Fix this bug by skipping the flush step when evicting inode.

Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
12 years agoFix URL of btrfs-progs git repository in docs
Arnd Hannemann [Wed, 16 Nov 2011 16:35:37 +0000 (17:35 +0100)]
Fix URL of btrfs-progs git repository in docs

The location of the btrfs-progs repository has been changed.
This patch updates the documentation accordingly.

Signed-off-by: Arnd Hannemann <arnd@arndnet.de>
12 years agobtrfs scrub: handle -ENOMEM from init_ipath()
Dan Carpenter [Wed, 16 Nov 2011 08:28:01 +0000 (11:28 +0300)]
btrfs scrub: handle -ENOMEM from init_ipath()

init_ipath() can return an ERR_PTR(-ENOMEM).

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
12 years agoMerge branches 'cxgb4', 'ipoib', 'misc' and 'qib' into for-next
Roland Dreier [Wed, 30 Nov 2011 02:01:53 +0000 (18:01 -0800)]
Merge branches 'cxgb4', 'ipoib', 'misc' and 'qib' into for-next

12 years agoMerge branch 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Linus Torvalds [Tue, 29 Nov 2011 22:43:22 +0000 (14:43 -0800)]
Merge branch 'pm-fixes' of git://git./linux/kernel/git/rafael/linux-pm

* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM: Update comments describing device power management callbacks
  PM / Sleep: Update documentation related to system wakeup
  PM / Runtime: Make documentation follow the new behavior of irq_safe
  PM / Sleep: Correct inaccurate information in devices.txt
  PM / Domains: Document how PM domains are used by the PM core
  PM / Hibernate: Do not leak memory in error/test code paths

12 years agoIB: Fix RCU lockdep splats
Eric Dumazet [Tue, 29 Nov 2011 21:31:23 +0000 (22:31 +0100)]
IB: Fix RCU lockdep splats

Commit f2c31e32b37 ("net: fix NULL dereferences in check_peer_redir()")
forgot to take care of infiniband uses of dst neighbours.

Many thanks to Marc Aurele who provided a nice bug report and feedback.

Reported-by: Marc Aurele La France <tsi@ualberta.ca>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: <stable@kernel.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
12 years agoIB/ipoib: Prevent hung task or softlockup processing multicast response
Mike Marciniszyn [Mon, 21 Nov 2011 13:43:54 +0000 (08:43 -0500)]
IB/ipoib: Prevent hung task or softlockup processing multicast response

This following can occur with ipoib when processing a multicast reponse:

    BUG: soft lockup - CPU#0 stuck for 67s! [ib_mad1:982]
    Modules linked in: ...
    CPU 0:
    Modules linked in: ...
    Pid: 982, comm: ib_mad1 Not tainted 2.6.32-131.0.15.el6.x86_64 #1 ProLiant DL160 G5
    RIP: 0010:[<ffffffff814ddb27>]  [<ffffffff814ddb27>] _spin_unlock_irqrestore+0x17/0x20
    RSP: 0018:ffff8802119ed860  EFLAGS: 00000246
    0000000000000004 RBX: ffff8802119ed860 RCX: 000000000000a299
    RDX: ffff88021086c700 RSI: 0000000000000246 RDI: 0000000000000246
    RBP: ffffffff8100bc8e R08: ffff880210ac229c R09: 0000000000000000
    R10: ffff88021278aab8 R11: 0000000000000000 R12: ffff8802119ed860
    R13: ffffffff8100be6e R14: 0000000000000001 R15: 0000000000000003
    FS:  0000000000000000(0000) GS:ffff880028200000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
    CR2: 00000000006d4840 CR3: 0000000209aa5000 CR4: 00000000000406f0
    DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
    Call Trace:
    [<ffffffffa032c247>] ? ipoib_mcast_send+0x157/0x480 [ib_ipoib]
    [<ffffffff8100bc8e>] ? apic_timer_interrupt+0xe/0x20
    [<ffffffff8100bc8e>] ? apic_timer_interrupt+0xe/0x20
    [<ffffffffa03283d4>] ? ipoib_path_lookup+0x124/0x2d0 [ib_ipoib]
    [<ffffffffa03286fc>] ? ipoib_start_xmit+0x17c/0x430 [ib_ipoib]
    [<ffffffff8141e758>] ? dev_hard_start_xmit+0x2c8/0x3f0
    [<ffffffff81439d0a>] ? sch_direct_xmit+0x15a/0x1c0
    [<ffffffff81423098>] ? dev_queue_xmit+0x388/0x4d0
    [<ffffffffa032d6b7>] ? ipoib_mcast_join_finish+0x2c7/0x510 [ib_ipoib]
    [<ffffffffa032dab8>] ? ipoib_mcast_sendonly_join_complete+0x1b8/0x1f0 [ib_ipoib]
    [<ffffffffa02a0946>] ? mcast_work_handler+0x1a6/0x710 [ib_sa]
    [<ffffffffa015f01e>] ? ib_send_mad+0xfe/0x3c0 [ib_mad]
    [<ffffffffa00f6c93>] ? ib_get_cached_lmc+0xa3/0xb0 [ib_core]
    [<ffffffffa02a0f9b>] ? join_handler+0xeb/0x200 [ib_sa]
    [<ffffffffa029e4fc>] ? ib_sa_mcmember_rec_callback+0x5c/0xa0 [ib_sa]
    [<ffffffffa029e79c>] ? recv_handler+0x3c/0x70 [ib_sa]
    [<ffffffffa01603a4>] ? ib_mad_completion_handler+0x844/0x9d0 [ib_mad]
    [<ffffffffa015fb60>] ? ib_mad_completion_handler+0x0/0x9d0 [ib_mad]
    [<ffffffff81088830>] ? worker_thread+0x170/0x2a0
    [<ffffffff8108e160>] ? autoremove_wake_function+0x0/0x40
    [<ffffffff810886c0>] ? worker_thread+0x0/0x2a0
    [<ffffffff8108ddf6>] ? kthread+0x96/0xa0
    [<ffffffff8100c1ca>] ? child_rip+0xa/0x20

Coinciding with stack trace is the following message:

    ib0: ib_address_create failed

The code below in ipoib_mcast_join_finish() will note the above
failure in the address handle but otherwise continue:

                ah = ipoib_create_ah(dev, priv->pd, &av);
                if (!ah) {
                        ipoib_warn(priv, "ib_address_create failed\n");
                } else {

The while loop at the bottom of ipoib_mcast_join_finish() will attempt
to send queued multicast packets in mcast->pkt_queue and eventually
end up in ipoib_mcast_send():

        if (!mcast->ah) {
                if (skb_queue_len(&mcast->pkt_queue) < IPOIB_MAX_MCAST_QUEUE)
                        skb_queue_tail(&mcast->pkt_queue, skb);
                else {
                        ++dev->stats.tx_dropped;
                        dev_kfree_skb_any(skb);
                }

My read is that the code will requeue the packet and return to the
ipoib_mcast_join_finish() while loop and the stage is set for the
"hung" task diagnostic as the while loop never sees a non-NULL ah, and
will do nothing to resolve.

There are GFP_ATOMIC allocates in the provider routines, so this is
possible and should be dealt with.

The test that induced the failure is associated with a host SM on the
same server during a shutdown.

This patch causes ipoib_mcast_join_finish() to exit with an error
which will flush the queued mcast packets.  Nothing is done to unwind
the QP attached state so that subsequent sends from above will retry
the join.

Reviewed-by: Ram Vepa <ram.vepa@qlogic.com>
Reviewed-by: Gary Leshner <gary.leshner@qlogic.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
12 years agoMerge branch 'slab/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg...
Linus Torvalds [Tue, 29 Nov 2011 19:13:22 +0000 (11:13 -0800)]
Merge branch 'slab/urgent' of git://git./linux/kernel/git/penberg/linux

* 'slab/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux:
  slub: avoid potential NULL dereference or corruption
  slub: use irqsafe_cpu_cmpxchg for put_cpu_partial
  slub: move discard_slab out of node lock
  slub: use correct parameter to add a page to partial list tail

12 years agoMerge branch 'dev' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Linus Torvalds [Tue, 29 Nov 2011 16:59:12 +0000 (08:59 -0800)]
Merge branch 'dev' of git://git./linux/kernel/git/tytso/ext4

* 'dev' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix racy use-after-free in ext4_end_io_dio()

12 years agoMerge branch 'defconfigs-for-arnd' of git://git.linaro.org/people/triad/linux-sterics...
Arnd Bergmann [Tue, 29 Nov 2011 14:50:17 +0000 (14:50 +0000)]
Merge branch 'defconfigs-for-arnd' of git://git.linaro.org/people/triad/linux-stericsson into fixes

12 years agoof: Add Silicon Image vendor prefix
Pawel Moll [Tue, 8 Nov 2011 11:35:20 +0000 (11:35 +0000)]
of: Add Silicon Image vendor prefix

"sil" is the most commonly used abbreviation for Silicon
Image products.

Signed-off-by: Pawel Moll <pawel.moll@arm.com>
12 years agoof/irq: of_irq_init: add check for parent equal to child node
Rob Herring [Mon, 28 Nov 2011 02:16:33 +0000 (20:16 -0600)]
of/irq: of_irq_init: add check for parent equal to child node

With the revert of "of/irq: of_irq_find_parent: check for parent equal to
child" (dc9372808412edb), we need another way to handle parent node equal
to the child node. This can simply be handled in of_irq_init by checking
for this condition.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Tested-by: Pawel Moll <pawel.moll@arm.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
12 years agoARM: ux500: update defconfig
Linus Walleij [Wed, 16 Nov 2011 19:30:35 +0000 (20:30 +0100)]
ARM: ux500: update defconfig

This updates the Ux500 defconfig with the new drivers for HWSEM
and AB5500 core that were merged in the 3.2 cycle.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
12 years agoARM: u300: update defconfig
Linus Walleij [Wed, 16 Nov 2011 19:44:13 +0000 (20:44 +0100)]
ARM: u300: update defconfig

This updates the U300 defconfig to support some new drivers like
FSMC, sets it to use the MMC clock gating scheme, and removes
some stale config options.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
12 years agoMerge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groec...
Linus Torvalds [Tue, 29 Nov 2011 03:28:32 +0000 (19:28 -0800)]
Merge branch 'hwmon-for-linus' of git://git./linux/kernel/git/groeck/linux-staging

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: convert drivers/hwmon/* to use module_platform_driver()
  hwmon: Remove redundant spi driver bus initialization

12 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux
Linus Torvalds [Tue, 29 Nov 2011 00:37:35 +0000 (16:37 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/aegl/linux

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  efivars: add missing parameter to efi_pstore_read()

12 years agoefivars: add missing parameter to efi_pstore_read()
Christoph Fritz [Mon, 28 Nov 2011 22:49:33 +0000 (23:49 +0100)]
efivars: add missing parameter to efi_pstore_read()

In the case where CONFIG_PSTORE=n, the function efi_pstore_read() doesn't
have the correct list of parameters. This patch provides a definition
of efi_pstore_read() with 'char **buf' added to fix this warning:
"drivers/firmware/efivars.c:609: warning: initialization from".

problem introduced in commit f6f8285132907757ef84ef8dae0a1244b8cde6ac

Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
12 years agoMerge branch 'for-3.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj...
Linus Torvalds [Mon, 28 Nov 2011 21:55:59 +0000 (13:55 -0800)]
Merge branch 'for-3.2-fixes' of git://git./linux/kernel/git/tj/cgroup

* 'for-3.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup_freezer: fix freezing groups with stopped tasks

12 years agoMerge branch 'for-3.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj...
Linus Torvalds [Mon, 28 Nov 2011 21:49:43 +0000 (13:49 -0800)]
Merge branch 'for-3.2-fixes' of git://git./linux/kernel/git/tj/percpu

* 'for-3.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: explain why per_cpu_ptr_to_phys() is more complicated than necessary
  percpu: fix chunk range calculation
  percpu: rename pcpu_mem_alloc to pcpu_mem_zalloc

12 years agoPM: Update comments describing device power management callbacks
Rafael J. Wysocki [Wed, 23 Nov 2011 20:20:32 +0000 (21:20 +0100)]
PM: Update comments describing device power management callbacks

The comments describing device power management callbacks in
include/pm.h are outdated and somewhat confusing, so make them
reflect the reality more accurately.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
12 years agoPM / Sleep: Update documentation related to system wakeup
Rafael J. Wysocki [Wed, 23 Nov 2011 20:20:15 +0000 (21:20 +0100)]
PM / Sleep: Update documentation related to system wakeup

The system wakeup section of Documentation/power/devices.txt is
outdated, so make it agree with the current code.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
12 years agoPM / Runtime: Make documentation follow the new behavior of irq_safe
Rafael J. Wysocki [Wed, 23 Nov 2011 20:20:07 +0000 (21:20 +0100)]
PM / Runtime: Make documentation follow the new behavior of irq_safe

The runtime PM core code behavior related to the power.irq_safe
device flag has changed recently and the documentation should be
modified to reflect it.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
12 years agoPM / Sleep: Correct inaccurate information in devices.txt
Rafael J. Wysocki [Wed, 23 Nov 2011 20:19:57 +0000 (21:19 +0100)]
PM / Sleep: Correct inaccurate information in devices.txt

The documentation file Documentation/power/devices.txt contains some
information that isn't correct any more due to code modifications
made after that file had been created (or updated last time).  Fix
this.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
12 years agoPM / Domains: Document how PM domains are used by the PM core
Rafael J. Wysocki [Wed, 23 Nov 2011 20:18:39 +0000 (21:18 +0100)]
PM / Domains: Document how PM domains are used by the PM core

The current power management documentation in Documentation/power/
either doesn't cover PM domains at all, or gives inaccurate
information about them, so update the relevant files in there to
follow the code.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
12 years agoIB/qib: Fix over-scheduling of QSFP work
Mike Marciniszyn [Wed, 9 Nov 2011 22:07:22 +0000 (17:07 -0500)]
IB/qib: Fix over-scheduling of QSFP work

Don't over-schedule QSFP work on driver initialization.  It could end
up being run simultaneously on two different CPUs resulting in bad
EEPROM reads.  In combination with setting the physical IB link state
prior to the IBC being brought out of reset, this can cause the link
state machine to start training early with wrong settings.

Signed-off-by: Mitko Haralanov <mitko@qlogic.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
12 years agoRDMA/cxgb4: Fix retry with MPAv1 logic for MPAv2
Kumar Sanghvi [Mon, 28 Nov 2011 16:39:15 +0000 (22:09 +0530)]
RDMA/cxgb4: Fix retry with MPAv1 logic for MPAv2

Fix logic so that we don't retry with MPAv1 once we have done that
already.  Otherwise, we end up retrying with MPAv1 even when its not
needed on getting peer aborts - and this could lead to kernel panic.

Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
12 years agoRDMA/cxgb4: Fix iw_cxgb4 count_rcqes() logic
Jonathan Lallinger [Thu, 20 Oct 2011 18:25:14 +0000 (13:25 -0500)]
RDMA/cxgb4: Fix iw_cxgb4 count_rcqes() logic

Fix another place in the code where logic dealing with the t4_cqe was
using the wrong QID.  This fixes the counting logic so that it tests
against the SQ QID instead of the RQ QID when counting RCQES.

Signed-off by: Jonathan Lallinger <jonathan@ogc.us>
Signed-off by: Steve Wise <swise@ogc.us>
Signed-off-by: Roland Dreier <roland@purestorage.com>
12 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux
Linus Torvalds [Mon, 28 Nov 2011 19:27:57 +0000 (11:27 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/aegl/linux

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  pstore: pass allocated memory region back to caller

12 years agoregulator: twl: fix twl4030 support for smps regulators
Tero Kristo [Mon, 28 Nov 2011 14:53:19 +0000 (16:53 +0200)]
regulator: twl: fix twl4030 support for smps regulators

SMPS regulator voltage control differs from the one of the LDO ones.
Current TWL code was using LDO regulator ops for controlling the SMPS
regulators, which fails. This was fixed fixed by adding separate
regulator type which uses correct logic and calculations for the
voltage levels.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org
12 years agoMerge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Linus Torvalds [Mon, 28 Nov 2011 17:05:23 +0000 (09:05 -0800)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/exynos: fixed wrong err ptr usage and destroy call in exeception
  drm/exynos: Add disable of manager
  drm/exynos: include linux/module.h
  drm/exynos: fix vblank bug.
  drm/exynos: changed buffer structure.
  drm/exynos: removed unnecessary variable.
  drm/exynos: use gem create function generically
  drm/exynos: checked for null pointer
  drm/exynos: added crtc dpms for disable crtc
  drm/exynos: removed meaningless parameter from fbdev update
  drm/exynos: restored kernel_fb_list when reiniting fb_helper
  drm/exynos: changed exynos_drm_display to exynos_drm_display_ops
  drm/exynos: added manager object to connector
  drm/exynos: fixed converting between display mode and timing
  drm/exynos: fixed connector flag with hpd and interlace scan for hdmi
  drm/exynos: added kms poll for handling hpd event

12 years agoMerge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Linus Torvalds [Mon, 28 Nov 2011 16:59:11 +0000 (08:59 -0800)]
Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  SUNRPC: Ensure we return EAGAIN in xs_nospace if congestion is cleared

12 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Linus Torvalds [Mon, 28 Nov 2011 16:53:36 +0000 (08:53 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (28 commits)
  ALSA: hda - Fix jack-detection control of VT1708
  ALSA: hda - cut and paste typo in cs420x_models[]
  ALSA: hda/realtek - Minor cleanup
  ALSA: hda/realtek - Fix missing inits of item indices for auto-mic
  ALSA: hda - Fix invalid pin and GPIO for Apple laptops with CS codecs
  ALSA: hda - Check subdevice mask in snd_hda_check_board_codec_sid_config()
  ALSA: hda - fail ELD reading early
  ALSA: lx6464es - fix device communication via command bus
  ALSA: lx6464es - command buffer API cleanup
  ALSA: hda - repoll ELD content for multiple times
  ALSA: hdspm - Fix PCI ID for PCIe RME MADI cards
  ASoC: Ensure WM8731 register cache is synced when resuming from disabled
  ALSA: cs5535 - Fix an endianness conversion
  ASoC: cs4271: Fix wrong mask parameter in some snd_soc_update_bits calls
  ASoC: wm_hubs: fix DB_RANGE size
  ASoC: wm9090: fix DB_RANGE size
  ASoC: wm8993: fix DB_RANGE size
  ASoC: wm8962: fix DB_RANGE size
  ASoC: sgtl5000: fix DB_RANGE size
  ASoC: rt5631: fix DB_RANGE size
  ...

12 years agoMerge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Mon, 28 Nov 2011 16:43:52 +0000 (08:43 -0800)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  hrtimer: Fix extra wakeups from __remove_hrtimer()
  timekeeping: add arch_offset hook to ktime_get functions
  clocksource: Avoid selecting mult values that might overflow when adjusted
  time: Improve documentation of timekeeeping_adjust()

12 years agoMerge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Mon, 28 Nov 2011 16:43:32 +0000 (08:43 -0800)]
Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Don't allow per cpu interrupts to be suspended

12 years agogenirq: fix regression in irqfixup, irqpoll
Edward Donovan [Mon, 28 Nov 2011 04:07:34 +0000 (23:07 -0500)]
genirq: fix regression in irqfixup, irqpoll

Commit fa27271bc8d2("genirq: Fixup poll handling") introduced a
regression that broke irqfixup/irqpoll for some hardware configurations.

Amidst reorganizing 'try_one_irq', that patch removed a test that
checked for 'action->handler' returning IRQ_HANDLED, before acting on
the interrupt.  Restoring this test back returns the functionality lost
since 2.6.39.  In the current set of tests, after 'action' is set, it
must precede '!action->next' to take effect.

With this and my previous patch to irq/spurious.c, c75d720fca8a, all
IRQ regressions that I have encountered are fixed.

Signed-off-by: Edward Donovan <edward.donovan@numble.net>
Reported-and-tested-by: Rogério Brito <rbrito@ime.usp.br>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@kernel.org (2.6.39+)
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoregulator: fix use after free bug
Lothar Waßmann [Mon, 28 Nov 2011 14:38:37 +0000 (15:38 +0100)]
regulator: fix use after free bug

This is caused by dereferencing 'rdev' after device_unregister() in
the regulator_unregister() function.  'rdev' is freed by
device_unregister(), so it must not be dereferenced after this call.

[Edited commit message for legibility -- broonie]

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoMerge branch 'exynos-drm' of git://git.infradead.org/users/kmpark/linux-samsung into...
Dave Airlie [Mon, 28 Nov 2011 14:17:09 +0000 (14:17 +0000)]
Merge branch 'exynos-drm' of git://git.infradead.org/users/kmpark/linux-samsung into drm-fixes

* 'exynos-drm' of git://git.infradead.org/users/kmpark/linux-samsung:
  drm/exynos: fixed wrong err ptr usage and destroy call in exeception
  drm/exynos: Add disable of manager
  drm/exynos: include linux/module.h
  drm/exynos: fix vblank bug.
  drm/exynos: changed buffer structure.
  drm/exynos: removed unnecessary variable.
  drm/exynos: use gem create function generically
  drm/exynos: checked for null pointer
  drm/exynos: added crtc dpms for disable crtc
  drm/exynos: removed meaningless parameter from fbdev update
  drm/exynos: restored kernel_fb_list when reiniting fb_helper
  drm/exynos: changed exynos_drm_display to exynos_drm_display_ops
  drm/exynos: added manager object to connector
  drm/exynos: fixed converting between display mode and timing
  drm/exynos: fixed connector flag with hpd and interlace scan for hdmi
  drm/exynos: added kms poll for handling hpd event

12 years agoregulator: aat2870: Fix the logic of checking if no id is matched in aat2870_get_regu...
Axel Lin [Mon, 28 Nov 2011 06:06:31 +0000 (14:06 +0800)]
regulator: aat2870: Fix the logic of checking if no id is matched in aat2870_get_regulator

In current implementation, the pointer ri is not NULL if no id is matched.
Fix it by checking i == ARRAY_SIZE(aat2870_regulators) if no id is matched.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org
12 years agoMerge branch 'fbdev-for-linus' of git://github.com/schandinat/linux-2.6
Linus Torvalds [Sun, 27 Nov 2011 20:05:56 +0000 (12:05 -0800)]
Merge branch 'fbdev-for-linus' of git://github.com/schandinat/linux-2.6

* 'fbdev-for-linus' of git://github.com/schandinat/linux-2.6:
  viafb: correct sync polarity for OLPC DCON
  video:da8xx-fb: Disable and reset sequence on version2 of LCDC
  OMAPDSS: DISPC: skip scaling calculations when not scaling
  OMAPFB: fix compilation warnings due to missing include
  OMAPDSS: HDMI: fix returned HDMI pixel clock

12 years agoath9k: Revert change that broke AR928X on Acer Ferrari One
Rafael J. Wysocki [Sat, 26 Nov 2011 22:37:43 +0000 (23:37 +0100)]
ath9k: Revert change that broke AR928X on Acer Ferrari One

Revert a hunk in drivers/net/wireless/ath/ath9k/hw.c introduced by
commit 2577c6e8f232 ("ath9k_hw: Add support for AR946/8x chipsets") that
caused a nasty regression to appear on my Acer Ferrari One (the box
locks up entirely at random times after the wireless has been started
without any way to get debug information out of it).

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoMerge branch 'fix/hda' into for-linus
Takashi Iwai [Sun, 27 Nov 2011 16:59:07 +0000 (17:59 +0100)]
Merge branch 'fix/hda' into for-linus

12 years agoALSA: hda - Fix jack-detection control of VT1708
Takashi Iwai [Thu, 24 Nov 2011 15:33:09 +0000 (16:33 +0100)]
ALSA: hda - Fix jack-detection control of VT1708

VT1708 has no support for unsolicited events per jack-plug, the driver
implements the workq for polling the jack-detection.  The mixer element
"Jack Detect" was supposed to control this behavior on/off, but this
doesn't work properly as is now.  The workq is always started and the
HP automute is always enabled.

This patch fixes the jack-detect control behavior by triggering / stopping
the work appropriately at the state change.  Also the work checks the
internal state to continue scheduling or not.

Cc: <stable@kernel.org> [v3.1]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoALSA: hda - cut and paste typo in cs420x_models[]
Dan Carpenter [Thu, 24 Nov 2011 11:48:24 +0000 (14:48 +0300)]
ALSA: hda - cut and paste typo in cs420x_models[]

The CS420X_IMAC27 was copied from the line before but CS420X_APPLE
was clearly intented.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agoARM: move VMALLOC_END down temporarily for shmobile
Nicolas Pitre [Mon, 19 Sep 2011 04:28:45 +0000 (00:28 -0400)]
ARM: move VMALLOC_END down temporarily for shmobile

THIS IS A TEMPORARY HACK.  The purpose of this is _only_ to avoid a
regression on an existing machine while a better fix is implemented.

On shmobile the consistent DMA memory area was set to 158MB in commit
28f0721a79 with no explanation.  The documented size for this area should
vary between 2MB and 14MB, and none of the other ARM targets exceed that.

The included #warning is therefore meant to be noisy on purpose to get
shmobile maintainers attention and this commit reverted once this
consistent DMA size conflict is resolved.

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Magnus Damm <damm@opensource.se>
Cc: Paul Mundt <lethal@linux-sh.org>
12 years agoARM: big removal of now unused vmalloc.h files
Nicolas Pitre [Thu, 15 Sep 2011 20:30:54 +0000 (16:30 -0400)]
ARM: big removal of now unused vmalloc.h files

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
12 years agoARM: add generic ioremap optimization by reusing static mappings
Nicolas Pitre [Fri, 16 Sep 2011 05:14:23 +0000 (01:14 -0400)]
ARM: add generic ioremap optimization by reusing static mappings

Now that we have all the static mappings from iotable_init() located
in the vmalloc area, it is trivial to optimize ioremap by reusing those
static mappings when the requested physical area fits in one of them,
and so in a generic way for all platforms.

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Tested-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Kevin Hilman <khilman@ti.com>
Tested-by: Jamie Iles <jamie@jamieiles.com>
12 years agoARM: simplify __iounmap() when dealing with section based mapping
Nicolas Pitre [Fri, 16 Sep 2011 02:12:19 +0000 (22:12 -0400)]
ARM: simplify __iounmap() when dealing with section based mapping

Firstly, there is no need to have a double pointer here as we're only
walking the vmlist and not modifying it.

Secondly, for the same reason, we don't need a write lock but only a
read lock here, since the lock only protects the coherency of the list
nothing else.

Lastly, the reason for holding a lock is not what the comment says, so
let's remove that misleading piece of information.

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
12 years agoARM: move iotable mappings within the vmalloc region
Nicolas Pitre [Thu, 25 Aug 2011 04:35:59 +0000 (00:35 -0400)]
ARM: move iotable mappings within the vmalloc region

In order to remove the build time variation between different SOCs with
regards to VMALLOC_END, the iotable mappings are now allocated inside
the vmalloc region.  This allows for VMALLOC_END to be identical across
all machines.

The value for VMALLOC_END is now set to 0xff000000 which is right where
the consistent DMA area starts.

To accommodate all static mappings on machines with possible highmem usage,
the default vmalloc area size is changed to 240 MB so that VMALLOC_START
is no higher than 0xf0000000 by default.

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Tested-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Kevin Hilman <khilman@ti.com>
Tested-by: Jamie Iles <jamie@jamieiles.com>
12 years agoARM: 7177/1: GIC: avoid skipping non-existent PPIs in irq_start calculation
Will Deacon [Fri, 25 Nov 2011 18:23:36 +0000 (19:23 +0100)]
ARM: 7177/1: GIC: avoid skipping non-existent PPIs in irq_start calculation

Commit 4294f8baa ("ARM: gic: add irq_domain support") defines irq_start
as irq_start = (irq_start & ~31) + 16; On a platform with a GIC and a
CPU without PPIs, this results in irq_start being off by 16.

This patch fixes gic_init so that we only carve out a PPI space when
PPIs exist for the GIC being initialised.

Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
12 years agoARM: 7176/1: cpu_pm: register GIC PM notifier only once
Marc Zyngier [Fri, 25 Nov 2011 16:58:19 +0000 (17:58 +0100)]
ARM: 7176/1: cpu_pm: register GIC PM notifier only once

When multiple GICs exist on a platform (RealView PB1176/11MP),
we must make sure the PM notifier block is only registered
once, otherwise we end up corrupting the PM notifier list.

The fix is to only register the notifier when initializing
the first GIC, as the power management functions seem
to iterate over all the registered GICs.

Tested on PB11MP and PB1176.

Reported-by: Will Deacon <will.deacon@arm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Colin Cross <ccross@android.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
12 years agoARM: 7175/1: add subname parameter to mfp_set_groupg callers
Axel Lin [Thu, 24 Nov 2011 23:23:28 +0000 (00:23 +0100)]
ARM: 7175/1: add subname parameter to mfp_set_groupg callers

commit 798681bf "ARM: 7158/1: add new MFP implement for NUC900"
adds subname parameter for mfp_set_groupg.

Thus add subname parameter to the callers.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Wan Zongshun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
12 years agoARM: 7174/1: Fix build error in kprobes test code on Thumb2 kernels
Jon Medhurst [Thu, 24 Nov 2011 12:01:08 +0000 (13:01 +0100)]
ARM: 7174/1: Fix build error in kprobes test code on Thumb2 kernels

When compiling kprobes-test-thumb.c an error like below may occur:

/tmp/ccKcuJcG.s:19179: Error: offset out of range

This is caused by the compiler underestimating the size of the inline
assembler instructions containing ".space 0x1000" and failing to spill
the literal pool in time to prevent the generation of PC relative load
instruction with invalid offsets.

The fix implemented by this patch is to replace a single large .space
directive by a number of 4 byte .space's. This requires splitting the
macros which generate test cases for branch instructions into two forms:
one with, and one without support for inserting extra code between
branch and target.

Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Jon Medhurst <jon.medhurst@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
12 years agoARM: 7172/1: dma: Drop GFP_COMP for DMA memory allocations
Sumit Bhattacharya [Wed, 23 Nov 2011 23:47:12 +0000 (00:47 +0100)]
ARM: 7172/1: dma: Drop GFP_COMP for DMA memory allocations

dma_alloc_coherent wants to split pages after allocation in order to
reduce the memory footprint. This does not work well with GFP_COMP
pages, so drop this flag before allocation.

This patch is ported from arch/avr32
(commit 3611553ef985ef7c5863c8a94641738addd04cff).

[swarren: s/HUGETLB_PAGE/HUGETLBFS/ in comment, minor comment cleanup]

Signed-off-by: Sumit Bhattacharya <sumitb@nvidia.com>
Tested-by: Varun Colbert <vcolbert@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>