staging: tidspbridge: remove dw_dmmu_base from cfg_hostres struct

We don't need to map iva2 iommu register base address
anymore.

Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: tidspbridge - move all iommu related code to a new file

Create dsp-mmu module and moves all the iommu code related to
this module.

Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: tidspbridge - remove hw directory

hw directory was only being used for custom iommu implementation
APIs, so after the iommu module migration this directory is not
needed anymore.

Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: tidspbridge - fix mmufault support

With changes for iommu migration mmufault report and dsp track
dump is broken, this patch fixes that.

Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: tidspbridge - remove custom mmu code from tiomap3430.c

This patch removes all the custom mmu code remaining in
tiomap3430.c which is not needed anymore.

Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: tidspbridge - rename bridge_brd_mem_map/unmap to a proper name

Now these functions only map user space addresses to dsp virtual
addresses, so now the functions have a more meaningful name.
Also now user_to_dsp_map returns the mapped address.

Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: tidspbridge - move shared memory iommu maps to tiomap3430.c

Now iommu maps of shared memory segments are done in
bridge_brd_start and unmaped in bridge_brd_stop.

Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: sst: Intel SST audio driver

This is the Intel SST audio driver.

As compared to the previous versions it has all the printks and other stuff
noted cleaned up and more hardware support. The Aava support is disabled in
this patch (is_aava resolves to 0) because the Aava board detection logic
is not yet upstream.

The driver itself is a combination of a traditional ALSA driver and a
hardware assisted offload driver which can play audio while the processor
is asleep but which can't do all the more interactive stuff.

In the general case most software would use the ALSA interface, but the
other interface is needed for certain classes of use such as music playback
on highly power consumption sensitive devices.

This is going to staging primarily because it depends upon the staging memrar
driver.

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Harsha Priya <priya.harsha@intel.com>
[Merged together and tweaked for -next]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: olpc_dcon: mark the driver as CONFIG_BROKEN for now

It doesn't build yet, as it depends on some changes that are not yet
in the tree, so mark it as BROKEN for now until that gets resolved.

Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Andres Salomon <dilinger@queued.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: tidspbridge: use omap_dsp_platform_data

Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

omap: add dsp platform device

Otherwise tidspbridge cannot work.

It looks like this was dropped in the conversion to staging. I took the
liberty of doing some cleaning up.

Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192u: Makefile: cleaned up Makefile cflag lines

Changed to use the proper ccflags-y option

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2860: Makefile: cleaned up Makefile cflag lines

Changed to use the proper ccflags-y option

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: usbip: Makefile: cleaned up Makefile cflag lines

Changed to use the proper ccflags-y option

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: dream: qdsp5: Makefile: cleaned up Makefile cflag lines

Changed to use the proper ccflags-y option

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: easycap: Makefile: cleaned up Makefile cflag lines

Changed to use the proper ccflags-y option

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2870: Makefile: cleaned up Makefile cflag lines

Changed to use the proper ccflags-y option

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: dream: Makefile: cleaned up Makefile cflag lines

Changed to use the proper ccflags-y option

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: dream: camera: Makefile: cleaned up Makefile cflag lines

Changed to use the proper ccflags-y option

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: cxt1e1: Makefile: cleaned up Makefile cflag lines

Changed to use the proper ccflags-y option

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8187se: Makefile: cleaned up Makefile cflag lines

Changed to use the proper ccflags-y option

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: tm6000: Makefile: cleaned up Makefile cflag lines

Changed to use the proper ccflags-y option

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192e: Makefile: cleaned up Makefile cflag lines

Changed to use the proper ccflags-y option

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192u: ieee80211: Makefile: cleaned up Makefile cflag lines

Changed to use the proper ccflags-y option

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: wlags49_h25: Makefile: cleaned up Makefile cflag lines

Changed to use the proper ccflags-y option

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6656: Makefile: cleaned up Makefile cflag lines

Changed to use the proper ccflags-y option

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6655: Makefile: cleaned up Makefile cflag lines

Changed to use the proper ccflags-y option

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: wlags49_h2: Makefile: cleaned up Makefile cflag lines

Changed to use the proper ccflags-y option

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: cx25821: Makefile: cleaned up Makefile cflag lines

Changed to use the proper ccflags-y option

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: iio: adc: Address mailing list feedback by Jonathan Cameron

Add missing new line
Fix typo

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: iio: adc: Enable driver support for ad799x AD converters

Driver for ad7991, ad7995, ad7999, ad7992, ad7993, ad7994, ad7997 and
ad7998 multichannel ADC.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: ti-st: mv ti_wilink_st header

Move the header to a standard linux device driver location.
This should pave the way for other drivers to be moved into the relevant
directories.

ti_wilink_st.h is a common header file used by the TI's shared transport device
driver for WiLink chipsets. Each individual protocol drivers like bluetooth
driver, FM V4L2 driver and GPS drivers will make use of this header.

Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: ti-st: drop the __KERNEL__

ti_wilink_st.h had the line discipline number which the user-space
daemon refers to, to install and un-install the line discipline upon
request from the shared transport driver via rfkill device.

On moving this line discipline number to standard location of tty.h
drop the __KERNEL__ flag in the header, since the header file would
no longer be used by user-space.

Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

tty.h: new ldisc for TI WiLink ST

Texas Instrument's WiLink7 connectivity devices pack wireless connectivity
technologies like Bluetooth, FM Radio Receiver and Transmitter, GPS and WLAN
into a single die.
The BT, FM and GPS core on the chip are interfaced to application
processors via a single UART.

This line discipline driver allows such different technologies to be used
simultaneous and independent of each other.
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: zram: work around oops due to startup ordering snafu

I'm getting an oops when running mkfs on zram:

NIP [d0000000030e0340] .zram_inc_stat+0x58/0x84 [zram]
[c00000006d58f720] [d0000000030e091c] .zram_make_request+0xa8/0x6a0 [zram]
[c00000006d58f840] [c00000000035795c] .generic_make_request+0x390/0x434
[c00000006d58f950] [c000000000357b14] .submit_bio+0x114/0x140
[c00000006d58fa20] [c000000000361778] .blkdev_issue_discard+0x1ac/0x250
[c00000006d58fb10] [c000000000361f68] .blkdev_ioctl+0x358/0x7fc
[c00000006d58fbd0] [c0000000001c1c1c] .block_ioctl+0x6c/0x90
[c00000006d58fc70] [c0000000001984c4] .do_vfs_ioctl+0x660/0x6d4
[c00000006d58fd70] [c0000000001985a0] .SyS_ioctl+0x68/0xb0

Since disksize no longer starts as 0 it looks like we can call
zram_make_request before the device has been initialised. The patch below
fixes the immediate problem but this would go away if we move the
initialisation function elsewhere (as suggested in another thread).

Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: spectra: remove duplicated includes

Remove duplicated includes.

Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: lirc: remove duplicated include

Remove duplicated include.

Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: tidspbridge: remove duplicated include

Remove duplicated include.

Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: ft1000: fix kernel info leak to userland for statistics

get_stat_data is not fully initialized before copy_to_user() call,
e.g. LedStat is not always set.

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: ft1000: fix error path

init_ft1000_netdev() calls kfree(netdev) instead of free_netdev(netdev).
It doesn't check kmalloc() return value.
ft1000_read_fifo_reg() doesn't free dr on error and calls kfree(urb)
instead of usb_free_urb(urb).  Also kfree(NULL) is OK.

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: comedi: file: Removed whitespaces before quoted newlines

Unnecessary whitespaces before quoted newlines

Signed-off-by: Maurice Dawson <mauricedawson2699@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: hv: Remove camel case variables in channel.c

Rename camel case variables in channel.c and changed them to
lowercase.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: autofs3: fix up TODO

As per Peter's request, move people to autofs4, don't fix up autofs3.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: brcm80211: bcmdefs.h: remove unused #defines

There were a number of unused and unneeded defines in here, remove them.

Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: brcm80211: remove STATIC definition

Use 'static', it's the correct thing to do.

Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: brcm80211: remove CONST definition

Use 'const', it's the correct thing to do.

Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: brcm80211: s/ulong/unsigned long/

This changes the usage everywhere in the driver, and removes
the definition as it should no longer be used anywhere.

Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: brcm80211: s/ushort/unsigned short/

This changes the usage everywhere in the driver, and removes
the definition as it should no longer be used anywhere.

Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: brcm80211: s/uchar/unsigned char/

This changes the usage everywhere in the driver, and removes
the definition as it should no longer be used anywhere.

Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: brcm80211: s/int8/s8/

This changes the usage everywhere in the driver, and removes
the definition as it should no longer be used anywhere.

Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: brcm80211: typedefs.h: remove uint8 definition

It's no longer needed anywhere, so remove it.

Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: brcm80211: include: s/uint8/u8/

Replace uint8 with u8, the correct kernel type to be using here.

Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: brcm80211: phy: s/uint8/u8/

Replace uint8 with u8, the correct kernel type to be using here.

Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: brcm80211: brcmfmac: s/uint8/u8/

Replace uint8 with u8, the correct kernel type to be using here.

Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: brcm80211: sys: s/uint8/u8/

Replace uint8 with u8, the correct kernel type to be using here.

Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: brcm80211: util: s/uint8/u8/

Replace uint8 with u8, the correct kernel type to be using here.

Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: brcm80211: typedefs.h: remove NULL definition

No need for a driver to define NULL, the core kernel handles that.

Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: brcm80211: remove unit64 and int64 typedefs

They are not used anywhere, nor should they be defined.

Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: brcm80211: typedefs.h move types.h to the top of the file

Include other files from the top, it's easier to unwind the logic that
way.

Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: brcm80211: typedefs.h: remove version.h inclusion

It isn't needed anymore.

Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: brcm80211: typedefs.h: remove some unused #if logic

We never care about __STRICT_ANSI__ from within the kernel, so remove
this logic.

Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: brcm80211: remove bool redefinition

The core kernel type code handles this properly, no driver
should ever do it.

Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: brcm80211: remove redefinition of size_t

No driver should ever do this.

Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: brcm80211: remove PTRSZ definition

It was never used.

Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: brcm80211: remove floating point typedefs

It's not ever used, so remove the typedef.  Floating point isn't used
in the kernel, so this could never be an issue here.

Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: brcm80211: remove INLINE definition

Use the "real" inline marking for functions.

Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: brcm80211: remove UNUSED_PARAMETER macro

It's not needed anywhere.

Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: brcm80211: remove unneeded #ifdef checks

For a .h file, you never need to check it, the .h file does it
itself.  For the typedef.h file, this is never needed.

Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: Purge unused extern declarations

Purge unused extern declarations

Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: Purge packets tags

No longer need packet tags

Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: Purge unused flags and macros from wlc_scb.h

Purge unused flags and macros from wlc_scb.h

Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: Purge unused #includes

Purging unused #includes.

Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: Move #includes out of header

Start the process of moving #includes out of headers and into individual C files.
For now, this patch addresses the softmac side of the driver, fullmac still to
be done.

Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: Remove unneeded definitions and structures.

Remove definitions and structures that are no longer needed.  Most of the
remaining ones can probably be replaced with the equivalent ones from
include/linux/ieee80211.h.

Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: Remove unnecessary assertions.

Remove assertions on the size of several structures.  These structures are
never used anywhere.

Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: Remove unnecessary debug print routines.

Removed several unused and rarely used debug printout routines that look into
portions of the frame that are more properly left to the mac80211 stack.

Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: Remove unused field from wlc_info structure.

Remove an unused field from the wlc_info structure, so that the underlying
structure can also be cleaned up.

Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: Remove unnecessary assertions.

Remove assertions on the size of several structures.  These structures are
never used anywhere.

Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: Remove unused structure.

Remove the wl_assoc_info_t structure.  It's never used, and depends on
structures defined in other header files that can now also be cleaned up.

Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: fix checkpatch error 'assignment in if condition'

Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: fix checkpatch error 'assignment in if condition'

Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: fix checkpatch error 'assignment in if condition'

Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: fix checkpatch error 'assignment in if condition'

Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: fix checkpatch error 'assignment in if condition'

Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: fix checkpatch error 'assignment in if condition'

Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: fix checkpatch errors 'assignment in if condition'

Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: fix checkpatch error 'assignment in if condition'

Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: fix checkpatch error 'assignment in if condition'

Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

smbfs: move to drivers/staging

smbfs has been scheduled for removal in 2.6.27, so
maybe we can now move it to drivers/staging on the
way out.

smbfs still uses the big kernel lock and nobody
is going to fix that, so we should be getting
rid of it soon.

This removes the 32 bit compat mount and ioctl
handling code, which is implemented in common fs
code, and moves all smbfs related files into
drivers/staging/smbfs.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: autofs3: create TODO file

This lists what's going to happen to the filesystem (i.e. removal
in 2.6.38 unless someone steps up to maintain it.)

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

autofs3: move to drivers/staging

Nobody appears to be interested in fixing autofs3 bugs
any more and it uses the BKL, which is going away.

Move this to staging for retirement. Unless someone
complains until 2.6.38, we can remove it for good.

The include/linux/auto_fs.h header file is still used
by autofs4, so it remains in place.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Ian Kent <raven@themaw.net>
Cc: autofs@linux.kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: tidspbridge: replace iommu custom for opensource implementation

Now the tidspbridge uses the API's from
iovmm module.

Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: ti dspbridge: disable all peripherals at bridge_brd_stop

DSP Bridge needs to disable the peripheral clocks when switches to
BRD_STOPPED since that would prevent the domain to enter in OFF state.

Signed-off-by: Ernesto Ramos <ernesto@ti.com>
Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: ti dspbridge: Replace find_lcm with lcm kernel func

Resendig this patch since it was missed in the last merge...

Remove find_lcm within nldr.c and use standard
kernel function lcm().

Signed-off-by: Ernesto Ramos <ernesto@ti.com>
Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: ti dspbridge: remove cmm_xlator_delete wrapper

Resending this patch since it was missed in the last merge...

Remove unnecessary cmm_xlator_delete function and use
kfree() kernel function directly.

Signed-off-by: Ernesto Ramos <ernesto@ti.com>
Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/bcm: add sparse annotations

This marks up the code where sparse complains in most cases.
Most of the changes are in the ioctl handling code, which
gets __user annotations, finding one unchecked user access.

The rest is mostly about marking functions static when they
are only used in one file.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/bcm: fix most build warnings

This removes all warnings I get on a 64 bit build except
for those that look unfixable, where we convert a pointer
to a 32 bit integer and change its byte order!

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/ft1000-usb: fix problems found by sparse

In the original code, address space annotations are missing,
which hides a possible unchecked user pointer access.

Two functions use a lot of stack space.

Extern declarations are all in the wrong place, which leads
to type differences between caller and callee in some cases.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/ft1000-usb: fix build warnings

This lets us see clearer when stuff breaks.

Most of the changes are fixes for casts between int and pointer
that don't work on 64 bit.

The ioctl function uses a large amount of stack, which gets
fixed by allocating the buffer dynamically.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/ft1000-usb: fix unlocked_ioctl prototype

unlocked_ioctl has a "long" return type.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>