[media] uvcvideo: Fix bogus XU controls information

XU control information is supposed to be entirely discoverable using
standard UVC queries. As some devices report bogus information (such as
reporting a read-only control as being read-write), add a fixup table
for XU controls.

This table can also be used to selectively disable requests supposed to
be supported by all XU controls (GET_MIN, GET_MAX, GET_DEF, GET_RES) but
not correctly (or at all) supported by the device.

The table currently disables GET_CUR on the Logitech motor control XU
pan/tilt controls.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] uvcvideo: Delay initialization of XU controls

XU controls initialization requires querying the device for control
information. As some buggy UVC devices will crash when queried
repeatedly in a tight loop, delay XU controls initialization until first
use.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] uvcvideo: Embed uvc_control_info inside struct uvc_control

Now that control information structures are not shared between control
instances, embed a uvc_control_info instance inside the uvc_control
structure instead of storing a pointer.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] uvcvideo: Remove sysadmin requirements for UVCIOC_CTRL_MAP

This patch removes the sysadmin requirements for UVCIOC_CTRL_MAP (and the stub
implementation of UVCIOC_CTRL_ADD). This requirement no longer makes sense with
the new XU control access mechanisms since XU controls can be accessed without
adding control mappings first.

A maximum number (currently 1024) of control mappings per device is enforced to
avoid excess memory consumption caused by careless user space applications.

Signed-off-by: Martin Rubli <martin_rubli@logitech.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] uvcvideo: Hardcode the index/selector relationship for XU controls

Devices advertise XU controls using a bitmask, in which each bit
corresponds to a control. The control selector, used to query the
control, isn't available in the USB descriptors.

All known UVC devices use control selectors equal to the control bit
index plus one. Hardcode that relationship in the driver, making the
UVCIOC_CTRL_ADD ioctl obsolete. All necessary information about XU
controls can be obtained by the driver at enumeration time.

The UVCIOC_CTRL_ADD ioctl is still supported for compatibility reasons,
but now always returns -EEXIST.

Finally, control mappings are now on a per-device basis and no longer
global.

As this changes the userspace interface, bump the driver version number
to 1.0.0 (it was about time).

Signed-off-by: Martin Rubli <martin_rubli@logitech.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] uvcvideo: Generate discontinuous sequence numbers when frames are lost

Increase the sequence number of the v4l2_buffer structure regardless of
any buffer states, so that discontinuous sequence numbers allow
applications to detect lost video frames.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] uvcvideo: Set bandwidth to at least 1024 with the FIX_BANDWIDTH quirk

The bandwidth estimate computed with the FIX_BANDIWDTH quirk is too low
for many cameras. Don't use maximum packet sizes lower than 1024 bytes
to try and work around the problem. According to measurements done on
two different camera models, the value is high enough to get most
resolutions working while not preventing two simultaneous VGA streams at
15 fps.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] uvcvideo: Update e-mail address and copyright notices

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] uvcvideo: Print query name in uvc_query_ctrl()

Instead of printing the query hex value in error messages, print its
name to make the messages more readable.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] uvcvideo: Constify the uvc_entity_match_guid arguments

They're not modified by the function, make them const.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] uvcvideo: Blacklist more controls for Hercules Dualpix Exchange

The Hercules Dualpix Exchange (06f8:3005) camera expose an absolute zoom
that is not implemented. Blacklist it.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] radio-mr800: fix locking order

Don't hold the lock before unregistering the device, since when the
device is unregistered the datastruct containing the lock may be freed
(if the refcount went to 0).

Also fixed the framework documentation that erroneously suggested the
wrong locking order as well.

Reported-by: David Ellingsworth <david@identd.dyndns.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Acked-by: David Ellingsworth <david@identd.dyndns.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] af9015: move remote controllers to new RC core

Use new RC core instead of old legacy RC implementation.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] fix A-Link DTU(m) remote controller PIP button

Button is PIP => KEY_NEW
http://www.linuxtv.org/wiki/index.php/Remote_Controllers

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] fix TerraTec remote controller PIP button

Button is PIP => KEY_NEW
http://www.linuxtv.org/wiki/index.php/Remote_Controllers
Thanks to Cart.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] fix MSI DIGIVOX mini III remote controller power buttons

Fix power button mappings as defined in
http://www.linuxtv.org/wiki/index.php/Remote_Controllers

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] Total Media In Hand remote controller

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] rename rc-msi-digivox.c -> rc-msi-digivox-iii.c

Rename remote controller driver I added earlier.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] MSI DIGIVOX mini II remote controller

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] A-Link DTU(m) remote controller

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] TwinHan AzureWave AD-TU700(704J) remote controller

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] LeadTek Y04G0051 remote controller keytable

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] AverMedia RM-KS remote controller keytable

Imported from af9015.h. Initial keytable was from
Jose Alberto Reguero <jareguero@telefonica.net> and
Felipe Morales Moreno <felipe.morales.moreno@gmail.com>

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] Digittrade DVB-T USB Stick remote controller keytable

Digittrade DVB-T USB Stick remote controller.
Imported from af9015.h. Initial keytable was from Alain Kalker <miki@dds.nl>

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] TrekStor DVB-T USB Stick remote controller

Imported from af9015.h.
Initial keytable was from Marc Schneider <macke@macke.org>

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] MSI DIGIVOX mini III remote controller keytable

MSI DIGIVOX mini III remote controller. Uses NEC extended 0x61d6.
This remote seems to be same as rc-kworld-315u.c. Anyhow, add new remote
since rc-kworld-315u.c lacks NEC extended address byte.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] TerraTec remote controller keytable

TerraTec slim remote, 7 rows, 4 columns. Uses NEC extended 0x02bd.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] af9015: remove needless variable set

Variable is don't care in that case. No need to set value.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] af9015: make checkpatch.pl happy

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] v4l/dvb: add support for AVerMedia AVerTV Red HD+ (A850T)

The AVerTV Red HD+ (A850T) is basically the same as the existing
AVerTV Volar Black HD (A850), but is specific to the french market.
The A850T identifies itself as a A850, but has its own PID. It even
suffers from the same EEPROM deficiencies.

This is based off a collection of information gathered from the
french support forums for Ubuntu, which I tried to properly format
into this patch:
  http://forum.ubuntu-fr.org/viewtopic.php?pid=3322825

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] af9013: cache some reg values to reduce reg reads

Demod + tuner specific RF AGC and IF AGC limit values are read from demod
memory in every signal strength query. Cache those to reduce I2C traffic.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] af9013: optimize code size

Precalculate coefficients register values. This reduces text size around 300 bytes.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] V4L-DVB: tm6000: Move VBI init to a separate function

While here, documment that VBI may need changes, based on video STD, and
do some cleanup at device init, to be sure that VBI init will happen
all the times, and to remove a duplicated video standard call.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: Improve audio standards handling and add SECAM-DK

Rework audio. Add SECAM-DK, move SECAM to SECAM-B | SECAM-G.

Add some new audio standards and tricks for future, see
tm6000_set_audio_std.

For SECAM-DK it works.

Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: add audio standards table

The better is to remove the audio init from tm6000-core and add a
separate per-standard set of tables.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] em28xx-audio: fix some locking issues

Those locking issues affect tvtime, causing a kernel oops/panic, due to
a race condition.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx231xx: use core-assisted lock

Instead of doing its own lock, use core-assisted one. As a bonus, it
will do the proper unlock during queue wait events. This fixes a
long-standing bug where softwares like tvtime would hang if you try to
use cx231xx-alsa.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx231xx: Colibri carrier offset was wrong for PAL/M

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx231xx: remove some unused functions

This file came originally from cx23885 driver. Some functions aren't
used. Now that they are declared as static, we have those errors:

drivers/media/video/cx231xx/cx231xx-417.c:615: warning: ‘mc417_gpio_set’ defined but not used
drivers/media/video/cx231xx/cx231xx-417.c:625: warning: ‘mc417_gpio_clear’ defined but not used
drivers/media/video/cx231xx/cx231xx-417.c:635: warning: ‘mc417_gpio_enable’ defined but not used

As they're not used, just remove them. If needed, they can be restored from
the git logs or from the cx23885 driver.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx231xx: declare static functions as such

drivers/media/video/cx23885/built-in.o: In function `mc417_memory_write':
/home/v4l/v4l/patchwork/drivers/media/video/cx23885/cx23885-417.c:482: multiple definition of `mc417_memory_write'
drivers/media/video/cx231xx/built-in.o:/home/v4l/v4l/patchwork/drivers/media/video/cx231xx/cx231xx-417.c:477: first defined here
drivers/media/video/cx23885/built-in.o: In function `mc417_gpio_set':
/home/v4l/v4l/patchwork/drivers/media/video/cx23885/cx23885-417.c:636: multiple definition of `mc417_gpio_set'
drivers/media/video/cx231xx/built-in.o:/home/v4l/v4l/patchwork/drivers/media/video/cx231xx/cx231xx-417.c:615: first defined here
drivers/media/video/cx23885/built-in.o: In function `mc417_gpio_enable':
/home/v4l/v4l/patchwork/drivers/media/video/cx23885/cx23885-417.c:656: multiple definition of `mc417_gpio_enable'
drivers/media/video/cx231xx/built-in.o:/home/v4l/v4l/patchwork/drivers/media/video/cx231xx/cx231xx-417.c:635: first defined here
drivers/media/video/cx23885/built-in.o: In function `mc417_memory_read':
/home/v4l/v4l/patchwork/drivers/media/video/cx23885/cx23885-417.c:546: multiple definition of `mc417_memory_read'
drivers/media/video/cx231xx/built-in.o:/home/v4l/v4l/patchwork/drivers/media/video/cx231xx/cx231xx-417.c:541: first defined here
drivers/media/video/cx23885/built-in.o: In function `mc417_gpio_clear':
/home/v4l/v4l/patchwork/drivers/media/video/cx23885/cx23885-417.c:646: multiple definition of `mc417_gpio_clear'
drivers/media/video/cx231xx/built-in.o:/home/v4l/v4l/patchwork/drivers/media/video/cx231xx/cx231xx-417.c:625: first defined here
drivers/media/video/cx23885/built-in.o: In function `mc417_register_read':
/home/v4l/v4l/patchwork/drivers/media/video/cx23885/cx23885-417.c:388: multiple definition of `mc417_register_read'
drivers/media/video/cx231xx/built-in.o:/home/v4l/v4l/patchwork/drivers/media/video/cx231xx/cx231xx-417.c:401: first defined here
drivers/media/video/cx23885/built-in.o: In function `mc417_register_write':
/home/v4l/v4l/patchwork/drivers/media/video/cx23885/cx23885-417.c:324: multiple definition of `mc417_register_write'
drivers/media/video/cx231xx/built-in.o:/home/v4l/v4l/patchwork/drivers/media/video/cx231xx/cx231xx-417.c:343: first defined here

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx231xx-417: Fix a gcc warning

gcc didn't like to have i++ inside a complex operation:

drivers/media/video/cx231xx/cx231xx-417.c: In function ‘cx231xx_load_firmware’:
drivers/media/video/cx231xx/cx231xx-417.c:1059: warning: operation on ‘i’ may be undefined
drivers/media/video/cx231xx/cx231xx-417.c:1061: warning: operation on ‘i’ may be undefined
drivers/media/video/cx231xx/cx231xx-417.c:1063: warning: operation on ‘i’ may be undefined

Btw, I agree with gcc, as we're using i and i++ at the same operation and,
depending on how optimization may occur, it may produce a wrong code.

While here, fix CodingStyle issues on the changed code.

Acked-by: Sri Deevi <Srinivasa.Deevi@conexant.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] CodingStyle cleanup at s5h1432 and cx231xx

The patches received from the vendor contained a lot of CodingStyle
issues. Cleans the style issues reported by checkpatch.pl on
those drivers.

It is better to do such style fixes when merging a big set of
changes than latter. Of course, the better is to receive patches
already cleaned ;)

Acked-by: Sri Deevi <Srinivasa.Deevi@conexant.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx231xx-audio: fix some locking issues

Acked-by: Sri Deevi <Srinivasa.Deevi@conexant.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tda18271: allow restricting max out to 4 bytes

By default, tda18271 tries to optimize I2C bus by updating all registers
at the same time. Unfortunately, some devices doesn't support it.

The current logic has a problem when small_i2c is equal to 8, since there
are some transfers using 11 + 1 bytes.

Fix the problem by enforcing the max size at the right place, and allows
reducing it to max = 3 + 1.

Acked-by: Michael Krufky <mkrufky@kernellabs.com>
Acked-by: Sri Deevi <Srinivasa.Deevi@conexant.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx231xx: Only change gpio direction when needed

Acked-by: Sri Deevi <Srinivasa.Deevi@conexant.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx231xx: better handle the master port enable command

Improves the logic, for it to be clearer and to avoid having
board-dependent config there.

Acked-by: Sri Deevi <Srinivasa.Deevi@conexant.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx231xx: properly use the right tuner i2c address

The driver has a field to indicate what bus is used by tuner and
by demod. However, this field were never used. On Pixelview,
it uses I2C 2 for tuner, instead of I2C 1.

drivers/media/video/cx231xx/cx231xx-cards.c

Acked-by: Sri Deevi <Srinivasa.Deevi@conexant.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx231xx: properly implement URB control messages log

This allows usage of a tool at v4l-utils tree to parse URB messages
and display them to userspace. The tool is available at:

http://git.linuxtv.org/v4l-utils.git?a=blob;f=contrib/cx231xx/parse_cx231xx.pl;hb=HEAD

Acked-by: Sri Deevi <Srinivasa.Deevi@conexant.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx231xx: fix Kconfig dependencies

ERROR: "cx2341x_mpeg_ctrls" [drivers/media/video/cx231xx/cx231xx.ko] undefined!
ERROR: "cx2341x_fill_defaults" [drivers/media/video/cx231xx/cx231xx.ko] undefined!
ERROR: "cx2341x_log_status" [drivers/media/video/cx231xx/cx231xx.ko] undefined!
ERROR: "cx2341x_ctrl_get_menu" [drivers/media/video/cx231xx/cx231xx.ko] undefined!
ERROR: "cx2341x_update" [drivers/media/video/cx231xx/cx231xx.ko] undefined!
ERROR: "cx2341x_ctrl_query" [drivers/media/video/cx231xx/cx231xx.ko] undefined!
ERROR: "cx2341x_ext_ctrls" [drivers/media/video/cx231xx/cx231xx.ko] undefined!

Acked-by: Sri Deevi <Srinivasa.Deevi@conexant.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx231xx: remove a printk warning at -avcore and at -417

drivers/media/video/cx231xx/cx231xx-avcore.c:1608: warning: format ‘%d’ expects type ‘int’, but argument 3 has type ‘long unsigned int’
drivers/media/video/cx231xx/cx231xx-417.c:1047: warning: format ‘%d’ expects type ‘int’, but argument 3 has type ‘size_t’

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx231xx: Fix vblank/vactive line counts for PAL/SECAM

Adjust the vblank and vactive counts so that they don't throw an error in
cx25840's set_std call (we did an equivalent change for NTSC when we got the
scaler working).

Signed-off-by: Devin Heitmueller <dheitmueller@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx231xx: properly set active line count for PAL/SECAM

The cx231xx_do_mode_ctrl_overrides() function was not touching the vactive line
count for PAL/SECAM modes, which in some use cases results in it being left in
the chip default state of 480 (NTSC).

Explicitly set the values, as is already done for NTSC.

Signed-off-by: Devin Heitmueller <dheitmueller@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx231xx: whitespace cleanup

Fix some indentation problems and remove an "if (1)" from the Colibri setup
function.

Signed-off-by: Devin Heitmueller <dheitmueller@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx231xx: remove board specific check for Colibri configuration

The cx231xx_set_Colibri_For_LowIF() function is only ever called if the tuner
has a DIF (see vidioc_s_frequency() in cx231xx-video.c).  Hence, we do not
need to do a board specific check in this function.

Signed-off-by: Devin Heitmueller <dheitmueller@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx231xx: Make the DIF configuration based on the tuner not the board id

The current code was deciding whether a DIF was present based on the board
profile.  However, this is just another thing for someone to get wrong when
adding new boards.  Make the decision based on the tuner instead, so that a
developer adding new boards only needs to specify which tuner the device has.

Of course, the first time somebody adds a board with a tuner other than xc5000
or tda18271, he/she will need to add another line for that tuner.  But we
provide a friendly message in dmesg to let them know that.

Signed-off-by: Devin Heitmueller <dheitmueller@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx231xx: remove i2c ir stubs

Nobody is ever going to implement an i2c based IR controller on a bridge that
has an onboard universal IR receiver.  This stuff was all copied from em28xx,
which has old enough versions of the chip that some didn't have onboard IR.

Remove the stubs related to i2c based IR (keeping the cx231xx-input code).

Signed-off-by: Devin Heitmueller <dheitmueller@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx231xx: move printk() line related to 417 initialization

Move a printk() message which refers to enabling the cx23417 so that it only
shows up on a board that has the cx23417.

Signed-off-by: Devin Heitmueller <dheitmueller@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx231xx: fixup video grabber board profile

The video grabber reference design (Veyron) does not have a tuner input, so
do not have it defined in the board profile.

Signed-off-by: Devin Heitmueller <dheitmueller@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx231xx: make output mode configurable via the board profile

Extend the board profile structure to allow configuration of the output mode.
Right now they are all doing VIP 1.1 format, but we have a board that needs
ITU656 format (which hasn't been checked in yet).

Signed-off-by: Devin Heitmueller <dheitmueller@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx231xx: Add initial support for Hauppauge USB-Live2

Add initial support for the Hauppauge USBLive 2 (2040:c200).  Note that I
had to copy a bunch of the case statements used for the Conexant video grabber
reference design (which also doesn't have a tuner).  This will likely need to
be refactored out into the board profile.

Signed-off-by: Devin Heitmueller <dheitmueller@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx231xx: set correct i2c port for Exeter tuner

The tuner is on i2c port 3 just like all the reference designs.  Having it
improperly set to port #1 causes the tuner initialization to fail when enabling
the device.

Signed-off-by: Devin Heitmueller <dheitmueller@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx231xx: set standard tune to last known frequency when switching inputs

If switching to a tuner input, reset the standard and tune to the last known
frequency.  We need to do this in particular for this bridge since the tuner
gets powered down when captuing on the composite or s-video inputs.

Signed-off-by: Devin Heitmueller <dheitmueller@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx231xx: Remove hack which puts device into bulk mode

Remove a hack which was jammed into s_input to force the device into bulk mode
at runtime (an abuse of the API).  If this sort of functionality is actually
needed (aside from the existing "transfer_mode" modprobe variable), a patch
can be submitted which makes use of a private control.

Signed-off-by: Devin Heitmueller <dheitmueller@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx231xx: Set the power mode instead of using the digital mux GPIOs

The Exeter hardware design does not use GPIOs to manage whether its in
digital mode or analog mode, but we need to setup the power control properly.

For that board, setup power control and remove the mux select call.  It is
highly likely that this change could be used by other boards as well, which
would make power management cleaner (fixing known issues transitioning between
analog and digital mode).

Signed-off-by: Devin Heitmueller <dheitmueller@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx231xx: do not call video_mux as part of isoc setup

You cannot call the video_mux routine from within the isoc setup, because that
code is shared with the digital isoc handler.  This was causing the GPIOs and
power control to be put into the wrong state when starting up digital mode.

Signed-off-by: Devin Heitmueller <dheitmueller@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx231xx: Clear avmode bits before setting

We need to clear out the field before setting individual bits, or else we end
up with a union of whatever was there and what we are trying to set.  For
example, switching to digital mode ends up being 0x30 instead of 0x10 if we
were previously in analog tv mode.

Signed-off-by: Devin Heitmueller <dheitmueller@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx231xx: make video scaler work properly

Move the responsibility for setting up the horizontal and vertical scalers
entirely to the cx25840 driver.  The cx231xx-avcore was actually programming
garbage into the HSCALE_CTRL and VSCALE_CTRL registers (because of differences
in how the em28xx driver worked, which the cx231xx driver was derived from).

The net effect is that the scaler now works properly (tested with both PAL
and NTSC under mplayer and tvtime).

This patch also gets rid of cx25840 errors showing up in dmesg which say
"720x480 is not a valid size" (since we now properly setup the size of the
active video area).

Signed-off-by: Devin Heitmueller <dheitmueller@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx231xx: reduce log severity for some debug events

Change the log level from info to debug for some log events that occur
frequently and should never need to be seen in normal operation.

Signed-off-by: Devin Heitmueller <dheitmueller@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx231xx: remove board specific initialization

There is no need for a switch statement here.  Use the contents of the board
profile to dictate the tuner driver and i2c address.  Eventually if a board
ever comes around which has a different i2c bus than #1, well that should be a
field in the board profile as well.

Signed-off-by: Devin Heitmueller <dheitmueller@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx231xx: Ensure VBI fields are sent in the correct order

The current code was sending one videobuf per field (despite having specified
V4L2_FIELD_SEQ_TB during setup).  As a result, application which used the
read() interface would work, except they would sometimes have the fields
reversed (depending on the luck of which field the device was on when the
application started VBI capture).  The net effect was that CC decoding would
only work about 50% of the time.

Restructure the VBI code a bit so that works like all the other drivers, such
that both fields are delivered in a single videobuf buffer, which ensures that
they are always received in a predictable order.

Signed-off-by: Devin Heitmueller <dheitmueller@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx231xx: Fix VBI parameters for sampling rate and offset

The VBI sampling rate and offset were incorrectly specified, which resulted in
CC data not being rendered under zvbi or tvtime.

Set the fields correctly.

Signed-off-by: Devin Heitmueller <dheitmueller@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx231xx: fix format string warning

Change a %x to a %p since the variable is a pointer

Signed-off-by: Devin Heitmueller <dheitmueller@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx231xx-dvb: remove unused variable

Get rid of warning about unused variable

Signed-off-by: Devin Heitmueller <dheitmueller@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] s5h1432: fix codingstyle issues

Run Lindent and fix a few spacing issues.

This patch makes no functional change to the driver.

Signed-off-by: Devin Heitmueller <dheitmueller@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] Use smaller i2c transaction size with 18271 tuner

Configure the tda18271 to use a smaller transaction size by default, which
works around some sort of i2c bug in the Polaris driver (which needs to be
debugged).

This should be safe for other boards (being in tuner-core means it will be
enabled by default), although testing needs to be done.

Signed-off-by: Devin Heitmueller <dheitmueller@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx231xx: fix race condition in DVB initialization

Fix case where analog calls come in while the DVB side of the board is still
initializing.  This patch is actually just an exact port of the same patch
made by Mauro to em28xx in hg rev 14762.

Signed-off-by: Devin Heitmueller <dheitmueller@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx231xx: add USB ID Hauppauge model 111301

Add a USB ID for model 111301.

Signed-off-by: Devin Heitmueller <dheitmueller@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx231xx: add support for Hauppauge EXETER

Add support for various Hauppauge EXETER designs.

Note by DJH: fixed a few minor 'make checkpatch' warnings before commit.

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Devin Heitmueller <dheitmueller@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx231xx: Added support for Carraera, Shelby, RDx_253S and VIDEO_GRABBER

Added support for new cx231xx boards - Carraera, Shelby, RDx_253S and
VIDEO_GRABBER.

[mchehab@redhat.com: Fix a merge conflict with BKL removal patches]
Signed-off-by: Palash Bandyopadhyay <palash.bandyopadhyay@conexant.com>
Signed-off-by: Devin Heitmueller <dheitmueller@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] s5h1432: Add new s5h1432 driver

Introduce a new driver for the s5h1432

Signed-off-by: Palash Bandyopadhyay <palash.bandyopadhyay@conexant.com>
Signed-off-by: Devin Heitmueller <dheitmueller@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] Staging: cx25821: fix braces and space coding style issues

Errors found by the checkpatch.pl tool.

[mchehab@redhat.com: merged a series of CodingStyle cleanup patches for cx25851. They're all from the same author, and patches the same driver]
Signed-off-by: Ruslan Pisarev <ruslan@rpisarev.org.ua>
Cc: Palash Bandyopadhyay <Palash.Bandyopadhyay@conexant.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] Staging: cx25821: remove spaces after parenthesis

fix "ERROR: space prohibited after that open parenthesis '('"

This is a patch to the cx25821-audio-upstream.h file that fixed up a
space errors found by the checkpatch.pl tools.

Signed-off-by: Ruslan Pisarev <ruslan@rpisarev.org.ua>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cafe_ccic: Implement VIDIOC_ENUM_FRAMEINTERVALS and ENUM_FRAMESIZES

This allows GStreamer to pick appropriate framerates and resolutions
based on desired capture parameters.

Signed-off-by: Daniel Drake <dsd@laptop.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ov7670: implement VIDIOC_ENUM_FRAMESIZES

GStreamer uses this.

Signed-off-by: Daniel Drake <dsd@laptop.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ov7670: implement VIDIOC_ENUM_FRAMEINTERVALS

Inquiring minds (and gstreamer) want to know.

Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cafe_ccic: Fix hang in command write processing

This patch, which basically reverts 6d77444ac, fixes an occasional
on-boot or on-capture hang on the XO-1 laptop.

It seems like the cafe hardware is flakier than we thought and that in
some cases, the commands get executed but are never reported as completed
(even if we substantially increase the delays before reading registers).

Reintroduce the 1-second CAFE_SMBUS_TIMEOUT to catch and avoid this
strange hardware bug.

Signed-off-by: Daniel Drake <dsd@laptop.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] go7007: MJPEG buffer overflow

The go7007 driver has a potential buffer overflow and pointer corruption
bug which causes a crash while capturing MJPEG. The motion detection
(MODET) active_map array can be overflowed by JPEG frame data that
emulates a MODET start code. The active_map overflow overwrites the
active_buf pointer, causing a crash.

The JPEG data that emulated MODET start code was being removed from the
output, resulting in garbled JPEG frames. Therefore ignore MODET start
codes when MODET is not enabled.

Signed-off-by: Pete Eberlein <pete@sensoray.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] staging/tm6000: Fix a warning message

I added a code to the driver to force it to produce a warning. This
were intended to remind me about a very bad hack. I never found a way
to workaround. So, instead of those warnings:

drivers/staging/tm6000/tm6000-core.c: In function ‘tm6000_init_analog_mode’:
drivers/staging/tm6000/tm6000-core.c:328: warning: ISO C90 forbids mixed declarations and code

Let's document the issue and hope if someone with the support of the vendor
might fix it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] lirc_igorplugusb: Fix a compilation waring

drivers/staging/lirc/lirc_igorplugusb.c: In function ‘usb_remote_probe’:
drivers/staging/lirc/lirc_igorplugusb.c:393: warning: format ‘%lu’ expects type ‘long unsigned int’, but argument 3 has type ‘unsigned int’

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] videobuf-dma-sg: Use min_t(size_t, PAGE_SIZE ..)

As pointed by Laurent:

I think min_t(size_t, PAGE_SIZE, size) is the preferred way.

Thanks-to: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] lirc: Make struct file_operations pointer const

struct file_operations was made const in the drivers, but not in struct
lirc_driver:

drivers/staging/lirc/lirc_it87.c:365: warning: initialization discards qualifiers from pointer target type
drivers/staging/lirc/lirc_parallel.c:571: warning: initialization discards qualifiers from pointer target type
drivers/staging/lirc/lirc_serial.c:1073: warning: initialization discards qualifiers from pointer target type
drivers/staging/lirc/lirc_sir.c:482: warning: initialization discards qualifiers from pointer target type
drivers/staging/lirc/lirc_zilog.c:1284: warning: assignment discards qualifiers from pointer target type

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB: Fix a merge conflict that affects unlock_ioctl

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB: tm6000: Fix warnings due to a small array size

drivers/staging/tm6000/tm6000-stds.c:101: warning: excess elements in array initializer
drivers/staging/tm6000/tm6000-stds.c:101: warning: (near initialization for ‘tv_stds[0].common’)
drivers/staging/tm6000/tm6000-stds.c:160: warning: excess elements in array initializer
drivers/staging/tm6000/tm6000-stds.c:160: warning: (near initialization for ‘tv_stds[1].common’)
drivers/staging/tm6000/tm6000-stds.c:219: warning: excess elements in array initializer
drivers/staging/tm6000/tm6000-stds.c:219: warning: (near initialization for ‘tv_stds[2].common’)
drivers/staging/tm6000/tm6000-stds.c:336: warning: excess elements in array initializer
drivers/staging/tm6000/tm6000-stds.c:336: warning: (near initialization for ‘tv_stds[4].common’)

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB: saa7134-input can't be a module right now

There are some symbols at saa7134-input that are used on saa7134
and vice-versa. Due to that, module install fails.

So, partially revert commit 9f495cf7d691c99bf7bdcec9f35fcfdad2cf9ae9.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB: videobuf-dma-sg: Fix a warning due to the usage of min(PAGE_SIZE, arg)

drivers/media/video/videobuf-dma-sg.c: In function ‘videobuf_pages_to_sg’:
drivers/media/video/videobuf-dma-sg.c:119: warning: comparison of distinct pointer types lacks a cast
drivers/media/video/videobuf-dma-sg.c:120: warning: comparison of distinct pointer types lacks a cast

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB: gspca - sonixj: Have 0c45:6130 handled by sonixj instead of sn9c102

The driver sn9c102 does not know about the sensor mi0360b.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB: gspca - sonixj: Bad detection of the end of image

The 'end of image' block may be splitted between two ISOC packets.
This case was not tested, so, some images could be lost and concatenated
to previous one(s), raising 'frame overflow' errors.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB: gspca - sonixj: Add sensor mi0360b

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB: gspca - mr97310a: Declare static the constant tables

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB: gspca - many subdrivers: Handle the buttons when CONFIG_INPUT=m

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>