rtc: omap: Use define directive for PIN_CONFIG_ACTIVE_HIGH

commit c50156526a2f7176b50134e3e5fb108ba09791b2 upstream.

Clang warns when one enumerated type is implicitly converted to another:

drivers/rtc/rtc-omap.c:574:21: warning: implicit conversion from
enumeration type 'enum rtc_pin_config_param' to different enumeration
type 'enum pin_config_param' [-Wenum-conversion]
        {"ti,active-high", PIN_CONFIG_ACTIVE_HIGH, 0},
        ~                  ^~~~~~~~~~~~~~~~~~~~~~
drivers/rtc/rtc-omap.c:579:12: warning: implicit conversion from
enumeration type 'enum rtc_pin_config_param' to different enumeration
type 'enum pin_config_param' [-Wenum-conversion]
        PCONFDUMP(PIN_CONFIG_ACTIVE_HIGH, "input active high", NULL, false),
        ~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/pinctrl/pinconf-generic.h:163:11: note: expanded from
macro 'PCONFDUMP'
        .param = a, .display = b, .format = c, .has_arg = d     \
                 ^
2 warnings generated.

It is expected that pinctrl drivers can extend pin_config_param because
of the gap between PIN_CONFIG_END and PIN_CONFIG_MAX so this conversion
isn't an issue. Most drivers that take advantage of this define the
PIN_CONFIG variables as constants, rather than enumerated values. Do the
same thing here so that Clang no longer warns.

Link: https://github.com/ClangBuiltLinux/linux/issues/144
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: armv8_deprecated: Fix undef_hook mask for thumb setend

commit fc2266011accd5aeb8ebc335c381991f20e26e33 upstream.

For thumb instructions, call_undef_hook() in traps.c first reads a u16,
and if the u16 indicates a T32 instruction (u16 >= 0xe800), a second
u16 is read, which then makes up the the lower half-word of a T32
instruction. For T16 instructions, the second u16 is not read,
which makes the resulting u32 opcode always have the upper half set to
0.

However, having the upper half of instr_mask in the undef_hook set to 0
masks out the upper half of all thumb instructions - both T16 and T32.
This results in trapped T32 instructions with the lower half-word equal
to the T16 encoding of setend (b650) being matched, even though the upper
half-word is not 0000 and thus indicates a T32 opcode.

An example of such a T32 instruction is eaa0b650, which should raise a
SIGILL since T32 instructions with an eaa prefix are unallocated as per
Arm ARM, but instead works as a SETEND because the second half-word is set
to b650.

This patch fixes the issue by extending instr_mask to include the
upper u32 half, which will still match T16 instructions where the upper
half is 0, but not T32 instructions.

Fixes: 2d888f48e056 ("arm64: Emulate SETEND for AArch32 tasks")
Cc: <stable@vger.kernel.org> # 4.0.x-
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Fredrik Strupe <fredrik@strupe.net>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: zfcp: fix missing erp_lock in port recovery trigger for point-to-point

commit 819732be9fea728623e1ed84eba28def7384ad1f upstream.

v2.6.27 commit cc8c282963bd ("[SCSI] zfcp: Automatically attach remote
ports") introduced zfcp automatic port scan.

Before that, the user had to use the sysfs attribute "port_add" of an FCP
device (adapter) to add and open remote (target) ports, even for the remote
peer port in point-to-point topology. That code path did a proper port open
recovery trigger taking the erp_lock.

Since above commit, a new helper function zfcp_erp_open_ptp_port()
performed an UNlocked port open recovery trigger. This can race with other
parallel recovery triggers. In zfcp_erp_action_enqueue() this could corrupt
e.g. adapter->erp_total_count or adapter->erp_ready_head.

As already found for fabric topology in v4.17 commit fa89adba1941 ("scsi:
zfcp: fix infinite iteration on ERP ready list"), there was an endless loop
during tracing of rport (un)block.  A subsequent v4.18 commit 9e156c54ace3
("scsi: zfcp: assert that the ERP lock is held when tracing a recovery
trigger") introduced a lockdep assertion for that case.

As a side effect, that lockdep assertion now uncovered the unlocked code
path for PtP. It is from within an adapter ERP action:

zfcp_erp_strategy[1479]  intentionally DROPs erp lock around
                         zfcp_erp_strategy_do_action()
zfcp_erp_strategy_do_action[1441]      NO erp lock
zfcp_erp_adapter_strategy[876]         NO erp lock
zfcp_erp_adapter_strategy_open[855]    NO erp lock
zfcp_erp_adapter_strategy_open_fsf[806]NO erp lock
zfcp_erp_adapter_strat_fsf_xconf[772]  erp lock only around
                                       zfcp_erp_action_to_running(),
                                       BUT *_not_* around
                                       zfcp_erp_enqueue_ptp_port()
zfcp_erp_enqueue_ptp_port[728]         BUG: *_not_* taking erp lock
_zfcp_erp_port_reopen[432]             assumes to be called with erp lock
zfcp_erp_action_enqueue[314]           assumes to be called with erp lock
zfcp_dbf_rec_trig[288]                 _checks_ to be called with erp lock:
lockdep_assert_held(&adapter->erp_lock);

It causes the following lockdep warning:

WARNING: CPU: 2 PID: 775 at drivers/s390/scsi/zfcp_dbf.c:288
                            zfcp_dbf_rec_trig+0x16a/0x188
no locks held by zfcperp0.0.17c0/775.

Fix this by using the proper locked recovery trigger helper function.

Link: https://lore.kernel.org/r/20200312174505.51294-2-maier@linux.ibm.com
Fixes: cc8c282963bd ("[SCSI] zfcp: Automatically attach remote ports")
Cc: <stable@vger.kernel.org> #v2.6.27+
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm verity fec: fix memory leak in verity_fec_dtr

commit 75fa601934fda23d2f15bf44b09c2401942d8e15 upstream.

Fix below kmemleak detected in verity_fec_ctr. output_pool is
allocated for each dm-verity-fec device. But it is not freed when
dm-table for the verity target is removed. Hence free the output
mempool in destructor function verity_fec_dtr.

unreferenced object 0xffffffffa574d000 (size 4096):
  comm "init", pid 1667, jiffies 4294894890 (age 307.168s)
  hex dump (first 32 bytes):
    8e 36 00 98 66 a8 0b 9b 00 00 00 00 00 00 00 00  .6..f...........
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<0000000060e82407>] __kmalloc+0x2b4/0x340
    [<00000000dd99488f>] mempool_kmalloc+0x18/0x20
    [<000000002560172b>] mempool_init_node+0x98/0x118
    [<000000006c3574d2>] mempool_init+0x14/0x20
    [<0000000008cb266e>] verity_fec_ctr+0x388/0x3b0
    [<000000000887261b>] verity_ctr+0x87c/0x8d0
    [<000000002b1e1c62>] dm_table_add_target+0x174/0x348
    [<000000002ad89eda>] table_load+0xe4/0x328
    [<000000001f06f5e9>] dm_ctl_ioctl+0x3b4/0x5a0
    [<00000000bee5fbb7>] do_vfs_ioctl+0x5dc/0x928
    [<00000000b475b8f5>] __arm64_sys_ioctl+0x70/0x98
    [<000000005361e2e8>] el0_svc_common+0xa0/0x158
    [<000000001374818f>] el0_svc_handler+0x6c/0x88
    [<000000003364e9f4>] el0_svc+0x8/0xc
    [<000000009d84cec9>] 0xffffffffffffffff

Fixes: a739ff3f543af ("dm verity: add support for forward error correction")
Depends-on: 6f1c819c219f7 ("dm: convert to bioset_init()/mempool_init()")
Cc: stable@vger.kernel.org
Signed-off-by: Harshini Shetty <harshini.x.shetty@sony.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: Use fixed constant in page_frag_alloc instead of size + 1

commit 8644772637deb121f7ac2df690cbf83fa63d3b70 upstream.

This patch replaces the size + 1 value introduced with the recent fix for 1
byte allocs with a constant value.

The idea here is to reduce code overhead as the previous logic would have
to read size into a register, then increment it, and write it back to
whatever field was being used. By using a constant we can avoid those
memory reads and arithmetic operations in favor of just encoding the
maximum value into the operation itself.

Fixes: 2c2ade81741c ("mm: page_alloc: fix ref bias in page_frag_alloc() for 1-byte allocs")
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools: gpio: Fix out-of-tree build regression

commit 82f04bfe2aff428b063eefd234679b2d693228ed upstream.

Commit 0161a94e2d1c7 ("tools: gpio: Correctly add make dependencies for
gpio_utils") added a make rule for gpio-utils-in.o but used $(output)
instead of the correct $(OUTPUT) for the output directory, breaking
out-of-tree build (O=xx) with the following error:

  No rule to make target 'out/tools/gpio/gpio-utils-in.o', needed by 'out/tools/gpio/lsgpio-in.o'.  Stop.

Fix that.

Fixes: 0161a94e2d1c ("tools: gpio: Correctly add make dependencies for gpio_utils")
Cc: <stable@vger.kernel.org>
Cc: Laura Abbott <labbott@redhat.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Link: https://lore.kernel.org/r/20200325103154.32235-1-anssi.hannula@bitwise.fi
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/speculation: Remove redundant arch_smt_update() invocation

commit 34d66caf251df91ff27b24a3a786810d29989eca upstream.

With commit a74cfffb03b7 ("x86/speculation: Rework SMT state change"),
arch_smt_update() is invoked from each individual CPU hotplug function.

Therefore the extra arch_smt_update() call in the sysfs SMT control is
redundant.

Fixes: a74cfffb03b7 ("x86/speculation: Rework SMT state change")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <konrad.wilk@oracle.com>
Cc: <dwmw@amazon.co.uk>
Cc: <bp@suse.de>
Cc: <srinivas.eeda@oracle.com>
Cc: <peterz@infradead.org>
Cc: <hpa@zytor.com>
Link: https://lkml.kernel.org/r/e2e064f2-e8ef-42ca-bf4f-76b612964752@default
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda: Initialize power_state field properly

commit 183ab39eb0ea9879bb68422a83e65f750f3192f0 upstream.

The recent commit 98081ca62cba ("ALSA: hda - Record the current power
state before suspend/resume calls") made the HD-audio driver to store
the PM state in power_state field.  This forgot, however, the
initialization at power up.  Although the codec drivers usually don't
need to refer to this field in the normal operation, let's initialize
it properly for consistency.

Fixes: 98081ca62cba ("ALSA: hda - Record the current power state before suspend/resume calls")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: mxs-dcp - fix scatterlist linearization for hash

commit fa03481b6e2e82355c46644147b614f18c7a8161 upstream.

The incorrect traversal of the scatterlist, during the linearization phase
lead to computing the hash value of the wrong input buffer.
New implementation uses scatterwalk_map_and_copy()
to address this issue.

Cc: <stable@vger.kernel.org>
Fixes: 15b59e7c3733 ("crypto: mxs - Add Freescale MXS DCP driver")
Signed-off-by: Rosioru Dragos <dragos.rosioru@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: drop block from cache on error in relocation

commit 8e19c9732ad1d127b5575a10f4fbcacf740500ff upstream.

If we have an error while building the backref tree in relocation we'll
process all the pending edges and then free the node.  However if we
integrated some edges into the cache we'll lose our link to those edges
by simply freeing this node, which means we'll leak memory and
references to any roots that we've found.

Instead we need to use remove_backref_node(), which walks through all of
the edges that are still linked to this node and free's them up and
drops any root references we may be holding.

CC: stable@vger.kernel.org # 4.9+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: VMX: fix crash cleanup when KVM wasn't used

commit dbef2808af6c594922fe32833b30f55f35e9da6d upstream.

If KVM wasn't used at all before we crash the cleanup procedure fails with
 BUG: unable to handle page fault for address: ffffffffffffffc8
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
 PGD 23215067 P4D 23215067 PUD 23217067 PMD 0
 Oops: 0000 [#8] SMP PTI
 CPU: 0 PID: 3542 Comm: bash Kdump: loaded Tainted: G      D           5.6.0-rc2+ #823
 RIP: 0010:crash_vmclear_local_loaded_vmcss.cold+0x19/0x51 [kvm_intel]

The root cause is that loaded_vmcss_on_cpu list is not yet initialized,
we initialize it in hardware_enable() but this only happens when we start
a VM.

Previously, we used to have a bitmap with enabled CPUs and that was
preventing [masking] the issue.

Initialized loaded_vmcss_on_cpu list earlier, right before we assign
crash_vmclear_loaded_vmcss pointer. blocked_vcpu_on_cpu list and
blocked_vcpu_on_cpu_lock are moved altogether for consistency.

Fixes: 31603d4fc2bb ("KVM: VMX: Always VMCLEAR in-use VMCSes during crash with kexec support")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200401081348.1345307-1-vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: VMX: Always VMCLEAR in-use VMCSes during crash with kexec support

commit 31603d4fc2bb4f0815245d496cb970b27b4f636a upstream.

VMCLEAR all in-use VMCSes during a crash, even if kdump's NMI shootdown
interrupted a KVM update of the percpu in-use VMCS list.

Because NMIs are not blocked by disabling IRQs, it's possible that
crash_vmclear_local_loaded_vmcss() could be called while the percpu list
of VMCSes is being modified, e.g. in the middle of list_add() in
vmx_vcpu_load_vmcs().  This potential corner case was called out in the
original commit[*], but the analysis of its impact was wrong.

Skipping the VMCLEARs is wrong because it all but guarantees that a
loaded, and therefore cached, VMCS will live across kexec and corrupt
memory in the new kernel.  Corruption will occur because the CPU's VMCS
cache is non-coherent, i.e. not snooped, and so the writeback of VMCS
memory on its eviction will overwrite random memory in the new kernel.
The VMCS will live because the NMI shootdown also disables VMX, i.e. the
in-progress VMCLEAR will #UD, and existing Intel CPUs do not flush the
VMCS cache on VMXOFF.

Furthermore, interrupting list_add() and list_del() is safe due to
crash_vmclear_local_loaded_vmcss() using forward iteration.  list_add()
ensures the new entry is not visible to forward iteration unless the
entire add completes, via WRITE_ONCE(prev->next, new).  A bad "prev"
pointer could be observed if the NMI shootdown interrupted list_del() or
list_add(), but list_for_each_entry() does not consume ->prev.

In addition to removing the temporary disabling of VMCLEAR, open code
loaded_vmcs_init() in __loaded_vmcs_clear() and reorder VMCLEAR so that
the VMCS is deleted from the list only after it's been VMCLEAR'd.
Deleting the VMCS before VMCLEAR would allow a race where the NMI
shootdown could arrive between list_del() and vmcs_clear() and thus
neither flow would execute a successful VMCLEAR.  Alternatively, more
code could be moved into loaded_vmcs_init(), but that gets rather silly
as the only other user, alloc_loaded_vmcs(), doesn't need the smp_wmb()
and would need to work around the list_del().

Update the smp_*() comments related to the list manipulation, and
opportunistically reword them to improve clarity.

[*] https://patchwork.kernel.org/patch/1675731/#3720461

Fixes: 8f536b7697a0 ("KVM: VMX: provide the vmclear function and a bitmap to support VMCLEAR in kdump")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200321193751.24985-2-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Allocate new rmap and large page tracking when moving memslot

commit edd4fa37baa6ee8e44dc65523b27bd6fe44c94de upstream.

Reallocate a rmap array and recalcuate large page compatibility when
moving an existing memslot to correctly handle the alignment properties
of the new memslot.  The number of rmap entries required at each level
is dependent on the alignment of the memslot's base gfn with respect to
that level, e.g. moving a large-page aligned memslot so that it becomes
unaligned will increase the number of rmap entries needed at the now
unaligned level.

Not updating the rmap array is the most obvious bug, as KVM accesses
garbage data beyond the end of the rmap.  KVM interprets the bad data as
pointers, leading to non-canonical #GPs, unexpected #PFs, etc...

  general protection fault: 0000 [#1] SMP
  CPU: 0 PID: 1909 Comm: move_memory_reg Not tainted 5.4.0-rc7+ #139
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
  RIP: 0010:rmap_get_first+0x37/0x50 [kvm]
  Code: <48> 8b 3b 48 85 ff 74 ec e8 6c f4 ff ff 85 c0 74 e3 48 89 d8 5b c3
  RSP: 0018:ffffc9000021bbc8 EFLAGS: 00010246
  RAX: ffff00617461642e RBX: ffff00617461642e RCX: 0000000000000012
  RDX: ffff88827400f568 RSI: ffffc9000021bbe0 RDI: ffff88827400f570
  RBP: 0010000000000000 R08: ffffc9000021bd00 R09: ffffc9000021bda8
  R10: ffffc9000021bc48 R11: 0000000000000000 R12: 0030000000000000
  R13: 0000000000000000 R14: ffff88827427d700 R15: ffffc9000021bce8
  FS:  00007f7eda014700(0000) GS:ffff888277a00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f7ed9216ff8 CR3: 0000000274391003 CR4: 0000000000162eb0
  Call Trace:
   kvm_mmu_slot_set_dirty+0xa1/0x150 [kvm]
   __kvm_set_memory_region.part.64+0x559/0x960 [kvm]
   kvm_set_memory_region+0x45/0x60 [kvm]
   kvm_vm_ioctl+0x30f/0x920 [kvm]
   do_vfs_ioctl+0xa1/0x620
   ksys_ioctl+0x66/0x70
   __x64_sys_ioctl+0x16/0x20
   do_syscall_64+0x4c/0x170
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f7ed9911f47
  Code: <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 21 6f 2c 00 f7 d8 64 89 01 48
  RSP: 002b:00007ffc00937498 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
  RAX: ffffffffffffffda RBX: 0000000001ab0010 RCX: 00007f7ed9911f47
  RDX: 0000000001ab1350 RSI: 000000004020ae46 RDI: 0000000000000004
  RBP: 000000000000000a R08: 0000000000000000 R09: 00007f7ed9214700
  R10: 00007f7ed92149d0 R11: 0000000000000246 R12: 00000000bffff000
  R13: 0000000000000003 R14: 00007f7ed9215000 R15: 0000000000000000
  Modules linked in: kvm_intel kvm irqbypass
  ---[ end trace 0c5f570b3358ca89 ]---

The disallow_lpage tracking is more subtle.  Failure to update results
in KVM creating large pages when it shouldn't, either due to stale data
or again due to indexing beyond the end of the metadata arrays, which
can lead to memory corruption and/or leaking data to guest/userspace.

Note, the arrays for the old memslot are freed by the unconditional call
to kvm_free_memslot() in __kvm_set_memory_region().

Fixes: 05da45583de9b ("KVM: MMU: large page support")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: s390: vsie: Fix delivery of addressing exceptions

commit 4d4cee96fb7a3cc53702a9be8299bf525be4ee98 upstream.

Whenever we get an -EFAULT, we failed to read in guest 2 physical
address space. Such addressing exceptions are reported via a program
intercept to the nested hypervisor.

We faked the intercept, we have to return to guest 2. Instead, right
now we would be returning -EFAULT from the intercept handler, eventually
crashing the VM.
the correct thing to do is to return 1 as rc == 1 is the internal
representation of "we have to go back into g2".

Addressing exceptions can only happen if the g2->g3 page tables
reference invalid g2 addresses (say, either a table or the final page is
not accessible - so something that basically never happens in sane
environments.

Identified by manual code inspection.

Fixes: a3508fbe9dc6 ("KVM: s390: vsie: initial support for nested virtualization")
Cc: <stable@vger.kernel.org> # v4.8+
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200403153050.20569-3-david@redhat.com
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
[borntraeger@de.ibm.com: fix patch description]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: s390: vsie: Fix region 1 ASCE sanity shadow address checks

commit a1d032a49522cb5368e5dfb945a85899b4c74f65 upstream.

In case we have a region 1 the following calculation
(31 + ((gmap->asce & _ASCE_TYPE_MASK) >> 2)*11)
results in 64. As shifts beyond the size are undefined the compiler is
free to use instructions like sllg. sllg will only use 6 bits of the
shift value (here 64) resulting in no shift at all. That means that ALL
addresses will be rejected.

The can result in endless loops, e.g. when prefix cannot get mapped.

Fixes: 4be130a08420 ("s390/mm: add shadow gmap support")
Tested-by: Janosch Frank <frankja@linux.ibm.com>
Reported-by: Janosch Frank <frankja@linux.ibm.com>
Cc: <stable@vger.kernel.org> # v4.8+
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200403153050.20569-2-david@redhat.com
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
[borntraeger@de.ibm.com: fix patch description, remove WARN_ON_ONCE]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/entry/32: Add missing ASM_CLAC to general_protection entry

commit 3d51507f29f2153a658df4a0674ec5b592b62085 upstream.

All exception entry points must have ASM_CLAC right at the
beginning. The general_protection entry is missing one.

Fixes: e59d1b0a2419 ("x86-32, smap: Add STAC/CLAC instructions to 32-bit kernel entry")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20200225220216.219537887@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

signal: Extend exec_id to 64bits

commit d1e7fd6462ca9fc76650fbe6ca800e35b24267da upstream.

Replace the 32bit exec_id with a 64bit exec_id to make it impossible
to wrap the exec_id counter.  With care an attacker can cause exec_id
wrap and send arbitrary signals to a newly exec'd parent.  This
bypasses the signal sending checks if the parent changes their
credentials during exec.

The severity of this problem can been seen that in my limited testing
of a 32bit exec_id it can take as little as 19s to exec 65536 times.
Which means that it can take as little as 14 days to wrap a 32bit
exec_id.  Adam Zabrocki has succeeded wrapping the self_exe_id in 7
days.  Even my slower timing is in the uptime of a typical server.
Which means self_exec_id is simply a speed bump today, and if exec
gets noticably faster self_exec_id won't even be a speed bump.

Extending self_exec_id to 64bits introduces a problem on 32bit
architectures where reading self_exec_id is no longer atomic and can
take two read instructions.  Which means that is is possible to hit
a window where the read value of exec_id does not match the written
value.  So with very lucky timing after this change this still
remains expoiltable.

I have updated the update of exec_id on exec to use WRITE_ONCE
and the read of exec_id in do_notify_parent to use READ_ONCE
to make it clear that there is no locking between these two
locations.

Link: https://lore.kernel.org/kernel-hardening/20200324215049.GA3710@pi3.com.pl
Fixes: 2.3.23pre2
Cc: stable@vger.kernel.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath9k: Handle txpower changes even when TPC is disabled

commit 968ae2caad0782db5dbbabb560d3cdefd2945d38 upstream.

When TPC is disabled IEEE80211_CONF_CHANGE_POWER event can be handled to
reconfigure HW's maximum txpower.

This fixes 0dBm txpower setting when user attaches to an interface for
the first time with the following scenario:

ieee80211_do_open()
    ath9k_add_interface()
        ath9k_set_txpower() /* Set TX power with not yet initialized
                               sc->hw->conf.power_level */

    ieee80211_hw_config() /* Iniatilize sc->hw->conf.power_level and
                             raise IEEE80211_CONF_CHANGE_POWER */

    ath9k_config() /* IEEE80211_CONF_CHANGE_POWER is ignored */

This issue can be reproduced with the following:

  $ modprobe -r ath9k
  $ modprobe ath9k
  $ wpa_supplicant -i wlan0 -c /tmp/wpa.conf &
  $ iw dev /* Here TX power is either 0 or 3 depending on RF chain */
  $ killall wpa_supplicant
  $ iw dev /* TX power goes back to calibrated value and subsequent
              calls will be fine */

Fixes: 283dd11994cde ("ath9k: add per-vif TX power capability")
Cc: stable@vger.kernel.org
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: OCTEON: irq: Fix potential NULL pointer dereference

commit 792a402c2840054533ef56279c212ef6da87d811 upstream.

There is a potential NULL pointer dereference in case kzalloc()
fails and returns NULL.

Fix this by adding a NULL check on *cd*

This bug was detected with the help of Coccinelle.

Fixes: 64b139f97c01 ("MIPS: OCTEON: irq: add CIB and other fixes")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

irqchip/versatile-fpga: Apply clear-mask earlier

commit 6a214a28132f19ace3d835a6d8f6422ec80ad200 upstream.

Clear its own IRQs before the parent IRQ get enabled, so that the
remaining IRQs do not accidentally interrupt the parent IRQ controller.

This patch also fixes a reboot bug on OX820 SoC, where the remaining
rps-timer IRQ raises a GIC interrupt that is left pending. After that,
the rps-timer IRQ is cleared during driver initialization, and there's
no IRQ left in rps-irq when local_irq_enable() is called, which evokes
an error message "unexpected IRQ trap".

Fixes: bdd272cbb97a ("irqchip: versatile FPGA: support cascaded interrupts from DT")
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200321133842.2408823-1-mans0n@gorani.run
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KEYS: reaching the keys quotas correctly

commit 2e356101e72ab1361821b3af024d64877d9a798d upstream.

Currently, when we add a new user key, the calltrace as below:

add_key()
  key_create_or_update()
    key_alloc()
    __key_instantiate_and_link
      generic_key_instantiate
        key_payload_reserve
          ......

Since commit a08bf91ce28e ("KEYS: allow reaching the keys quotas exactly"),
we can reach max bytes/keys in key_alloc, but we forget to remove this
limit when we reserver space for payload in key_payload_reserve. So we
can only reach max keys but not max bytes when having delta between plen
and type->def_datalen. Remove this limit when instantiating the key, so we
can keep consistent with key_alloc.

Also, fix the similar problem in keyctl_chown_key().

Fixes: 0b77f5bfb45c ("keys: make the keyring quotas controllable through /proc/sys")
Fixes: a08bf91ce28e ("KEYS: allow reaching the keys quotas exactly")
Cc: stable@vger.kernel.org # 5.0.x
Cc: Eric Biggers <ebiggers@google.com>
Signed-off-by: Yang Xu <xuyang2018.jy@cn.fujitsu.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thermal: devfreq_cooling: inline all stubs for CONFIG_DEVFREQ_THERMAL=n

commit 3f5b9959041e0db6dacbea80bb833bff5900999f upstream.

When CONFIG_DEVFREQ_THERMAL is disabled all functions except
of_devfreq_cooling_register_power() were already inlined. Also inline
the last function to avoid compile errors when multiple drivers call
of_devfreq_cooling_register_power() when CONFIG_DEVFREQ_THERMAL is not
set. Compilation failed with the following message:
  multiple definition of `of_devfreq_cooling_register_power'
(which then lists all usages of of_devfreq_cooling_register_power())

Thomas Zimmermann reported this problem [0] on a kernel config with
CONFIG_DRM_LIMA={m,y}, CONFIG_DRM_PANFROST={m,y} and
CONFIG_DEVFREQ_THERMAL=n after both, the lima and panfrost drivers
gained devfreq cooling support.

[0] https://www.spinics.net/lists/dri-devel/msg252825.html

Fixes: a76caf55e5b356 ("thermal: Add devfreq cooling")
Cc: stable@vger.kernel.org
Reported-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200403205133.1101808-1-martin.blumenstingl@googlemail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

acpi/x86: ignore unspecified bit positions in the ACPI global lock field

commit ecb9c790999fd6c5af0f44783bd0217f0b89ec2b upstream.

The value in "new" is constructed from "old" such that all bits defined
as reserved by the ACPI spec[1] are left untouched. But if those bits
do not happen to be all zero, "new < 3" will not evaluate to true.

The firmware of the laptop(s) Medion MD63490 / Akoya P15648 comes with
garbage inside the "FACS" ACPI table. The starting value is
old=0x4944454d, therefore new=0x4944454e, which is >= 3. Mask off
the reserved bits.

[1] https://uefi.org/sites/default/files/resources/ACPI_6_2.pdf

Link: https://bugzilla.kernel.org/show_bug.cgi?id=206553
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Jan Engelhardt <jengelh@inai.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: ti-vpe: cal: fix disable_irqs to only the intended target

commit 1db56284b9da9056093681f28db48a09a243274b upstream.

disable_irqs() was mistakenly disabling all interrupts when called.
This cause all port stream to stop even if only stopping one of them.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: pcm: oss: Fix regression by buffer overflow fix

commit ae769d3556644888c964635179ef192995f40793 upstream.

The recent fix for the OOB access in PCM OSS plugins (commit
f2ecf903ef06: "ALSA: pcm: oss: Avoid plugin buffer overflow") caused a
regression on OSS applications.  The patch introduced the size check
in client and slave size calculations to limit to each plugin's buffer
size, but I overlooked that some code paths call those without
allocating the buffer but just for estimation.

This patch fixes the bug by skipping the size check for those code
paths while keeping checking in the actual transfer calls.

Fixes: f2ecf903ef06 ("ALSA: pcm: oss: Avoid plugin buffer overflow")
Tested-and-reported-by: Jari Ruusu <jari.ruusu@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200403072515.25539-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: ice1724: Fix invalid access for enumerated ctl items

commit c47914c00be346bc5b48c48de7b0da5c2d1a296c upstream.

The access to Analog Capture Source control value implemented in
prodigy_hifi.c is wrong, as caught by the recently introduced sanity
check; it should be accessing value.enumerated.item[] instead of
value.integer.value[].  This patch corrects the wrong access pattern.

Fixes: 6b8d6e5518e2 ("[ALSA] ICE1724: Added support for Audiotrak Prodigy 7.1 HiFi & HD2, Hercules Fortissimo IV")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207139
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200407084402.25589-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda: Fix potential access overflow in beep helper

commit 0ad3f0b384d58f3bd1f4fb87d0af5b8f6866f41a upstream.

The beep control helper function blindly stores the values in two
stereo channels no matter whether the actual control is mono or
stereo.  This is practically harmless, but it annoys the recently
introduced sanity check, resulting in an error when the checker is
enabled.

This patch corrects the behavior to store only on the defined array
member.

Fixes: 0401e8548eac ("ALSA: hda - Move beep helper functions to hda_beep.c")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207139
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200407084402.25589-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda: Add driver blacklist

commit 3c6fd1f07ed03a04debbb9a9d782205f1ef5e2ab upstream.

The recent AMD platform exposes an HD-audio bus but without any actual
codecs, which is internally tied with a USB-audio device, supposedly.
It results in "no codecs" error of HD-audio bus driver, and it's
nothing but a waste of resources.

This patch introduces a static blacklist table for skipping such a
known bogus PCI SSID entry.  As of writing this patch, the known SSIDs
are:
* 1043:874f - ASUS ROG Zenith II / Strix
* 1462:cb59 - MSI TRX40 Creator
* 1462:cb60 - MSI TRX40

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206543
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200408140449.22319-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Add mixer workaround for TRX40 and co

commit 2a48218f8e23d47bd3e23cfdfb8aa9066f7dc3e6 upstream.

Some recent boards (supposedly with a new AMD platform) contain the
USB audio class 2 device that is often tied with HD-audio.  The device
exposes an Input Gain Pad control (id=19, control=12) but this node
doesn't behave correctly, returning an error for each inquiry of
GET_MIN and GET_MAX that should have been mandatory.

As a workaround, simply ignore this node by adding a usbmix_name_map
table entry.  The currently known devices are:
* 0414:a002 - Gigabyte TRX40 Aorus Pro WiFi
* 0b05:1916 - ASUS ROG Zenith II
* 0b05:1917 - ASUS ROG Strix
* 0db0:0d64 - MSI TRX40 Creator
* 0db0:543d - MSI TRX40

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206543
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200408140449.22319-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: composite: Inform controller driver of self-powered

commit 5e5caf4fa8d3039140b4548b6ab23dd17fce9b2c upstream.

Different configuration/condition may draw different power. Inform the
controller driver of the change so it can respond properly (e.g.
GET_STATUS request). This fixes an issue with setting MaxPower from
configfs. The composite driver doesn't check this value when setting
self-powered.

Cc: stable@vger.kernel.org
Fixes: 88af8bbe4ef7 ("usb: gadget: the start of the configfs interface")
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: f_fs: Fix use after free issue as part of queue failure

commit f63ec55ff904b2f2e126884fcad93175f16ab4bb upstream.

In AIO case, the request is freed up if ep_queue fails.
However, io_data->req still has the reference to this freed
request. In the case of this failure if there is aio_cancel
call on this io_data it will lead to an invalid dequeue
operation and a potential use after free issue.
Fix this by setting the io_data->req to NULL when the request
is freed as part of queue failure.

Fixes: 2e4c7553cd6f ("usb: gadget: f_fs: add aio support")
Signed-off-by: Sriharsha Allenki <sallenki@codeaurora.org>
CC: stable <stable@vger.kernel.org>
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Link: https://lore.kernel.org/r/20200326115620.12571-1-sallenki@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: topology: use name_prefix for new kcontrol

commit abca9e4a04fbe9c6df4d48ca7517e1611812af25 upstream.

Current topology doesn't add prefix of component to new kcontrol.

Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com>
Link: https://lore.kernel.org/r/009b01d60804$ae25c2d0$0a714870$@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: dpcm: allow start or stop during pause for backend

commit 21fca8bdbb64df1297e8c65a746c4c9f4a689751 upstream.

soc_compr_trigger_fe() allows start or stop after pause_push.
In dpcm_be_dai_trigger(), however, only pause_release is allowed
command after pause_push.
So, start or stop after pause in compress offload is always
returned as error if the compress offload is used with dpcm.
To fix the problem, SND_SOC_DPCM_STATE_PAUSED should be allowed
for start or stop command.

Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/004d01d607c1$7a3d5250$6eb7f6f0$@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: dapm: connect virtual mux with default value

commit 3bbbb7728fc853d71dbce4073fef9f281fbfb4dd upstream.

Since a virtual mixer has no backing registers
to decide which path to connect,
it will try to match with initial state.
This is to ensure that the default mixer choice will be
correctly powered up during initialization.
Invert flag is used to select initial state of the virtual switch.
Since actual hardware can't be disconnected by virtual switch,
connected is better choice as initial state in many cases.

Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com>
Link: https://lore.kernel.org/r/01a301d60731$b724ea10$256ebe30$@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: fix regwmask

commit 0ab070917afdc93670c2d0ea02ab6defb6246a7c upstream.

If regwshift is 32 and the selected architecture compiles '<<' operator
for signed int literal into rotating shift, '1<<regwshift' became 1 and
it makes regwmask to 0x0.
The literal is set to unsigned long to get intended regwmask.

Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com>
Link: https://lore.kernel.org/r/001001d60665$db7af3e0$9270dba0$@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: rtsx: set correct pcr_ops for rts522A

[ Upstream commit 10cea23b6aae15e8324f4101d785687f2c514fe5 ]

rts522a should use rts522a_pcr_ops, which is
diffrent with rts5227 in phy/hw init setting.

Fixes: ce6a5acc9387 ("mfd: rtsx: Add support for rts522A")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200326032618.20472-1-yuehaibing@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: track reloc roots based on their commit root bytenr

[ Upstream commit ea287ab157c2816bf12aad4cece41372f9d146b4 ]

We always search the commit root of the extent tree for looking up back
references, however we track the reloc roots based on their current
bytenr.

This is wrong, if we commit the transaction between relocating tree
blocks we could end up in this code in build_backref_tree

  if (key.objectid == key.offset) {
  /*
   * Only root blocks of reloc trees use backref
   * pointing to itself.
   */
  root = find_reloc_root(rc, cur->bytenr);
  ASSERT(root);
  cur->root = root;
  break;
  }

find_reloc_root() is looking based on the bytenr we had in the commit
root, but if we've COWed this reloc root we will not find that bytenr,
and we will trip over the ASSERT(root).

Fix this by using the commit_root->start bytenr for indexing the commit
root.  Then we change the __update_reloc_root() caller to be used when
we switch the commit root for the reloc root during commit.

This fixes the panic I was seeing when we started throttling relocation
for delayed refs.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: remove a BUG_ON() from merge_reloc_roots()

[ Upstream commit 7b7b74315b24dc064bc1c683659061c3d48f8668 ]

This was pretty subtle, we default to reloc roots having 0 root refs, so
if we crash in the middle of the relocation they can just be deleted.
If we successfully complete the relocation operations we'll set our root
refs to 1 in prepare_to_merge() and then go on to merge_reloc_roots().

At prepare_to_merge() time if any of the reloc roots have a 0 reference
still, we will remove that reloc root from our reloc root rb tree, and
then clean it up later.

However this only happens if we successfully start a transaction.  If
we've aborted previously we will skip this step completely, and only
have reloc roots with a reference count of 0, but were never properly
removed from the reloc control's rb tree.

This isn't a problem per-se, our references are held by the list the
reloc roots are on, and by the original root the reloc root belongs to.
If we end up in this situation all the reloc roots will be added to the
dirty_reloc_list, and then properly dropped at that point.  The reloc
control will be free'd and the rb tree is no longer used.

There were two options when fixing this, one was to remove the BUG_ON(),
the other was to make prepare_to_merge() handle the case where we
couldn't start a trans handle.

IMO this is the cleaner solution.  I started with handling the error in
prepare_to_merge(), but it turned out super ugly.  And in the end this
BUG_ON() simply doesn't matter, the cleanup was happening properly, we
were just panicing because this BUG_ON() only matters in the success
case.  So I've opted to just remove it and add a comment where it was.

Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

locking/lockdep: Avoid recursion in lockdep_count_{for,back}ward_deps()

[ Upstream commit 25016bd7f4caf5fc983bbab7403d08e64cba3004 ]

Qian Cai reported a bug when PROVE_RCU_LIST=y, and read on /proc/lockdep
triggered a warning:

  [ ] DEBUG_LOCKS_WARN_ON(current->hardirqs_enabled)
  ...
  [ ] Call Trace:
  [ ]  lock_is_held_type+0x5d/0x150
  [ ]  ? rcu_lockdep_current_cpu_online+0x64/0x80
  [ ]  rcu_read_lock_any_held+0xac/0x100
  [ ]  ? rcu_read_lock_held+0xc0/0xc0
  [ ]  ? __slab_free+0x421/0x540
  [ ]  ? kasan_kmalloc+0x9/0x10
  [ ]  ? __kmalloc_node+0x1d7/0x320
  [ ]  ? kvmalloc_node+0x6f/0x80
  [ ]  __bfs+0x28a/0x3c0
  [ ]  ? class_equal+0x30/0x30
  [ ]  lockdep_count_forward_deps+0x11a/0x1a0

The warning got triggered because lockdep_count_forward_deps() call
__bfs() without current->lockdep_recursion being set, as a result
a lockdep internal function (__bfs()) is checked by lockdep, which is
unexpected, and the inconsistency between the irq-off state and the
state traced by lockdep caused the warning.

Apart from this warning, lockdep internal functions like __bfs() should
always be protected by current->lockdep_recursion to avoid potential
deadlocks and data inconsistency, therefore add the
current->lockdep_recursion on-and-off section to protect __bfs() in both
lockdep_count_forward_deps() and lockdep_count_backward_deps()

Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200312151258.128036-1-boqun.feng@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/boot: Use unsigned comparison for addresses

[ Upstream commit 81a34892c2c7c809f9c4e22c5ac936ae673fb9a2 ]

The load address is compared with LOAD_PHYSICAL_ADDR using a signed
comparison currently (using jge instruction).

When loading a 64-bit kernel using the new efi32_pe_entry() point added by:

  97aa276579b2 ("efi/x86: Add true mixed mode entry point into .compat section")

using Qemu with -m 3072, the firmware actually loads us above 2Gb,
resulting in a very early crash.

Use the JAE instruction to perform a unsigned comparison instead, as physical
addresses should be considered unsigned.

Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200301230436.2246909-6-nivedita@alum.mit.edu
Link: https://lore.kernel.org/r/20200308080859.21568-14-ardb@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

gfs2: Don't demote a glock until its revokes are written

[ Upstream commit df5db5f9ee112e76b5202fbc331f990a0fc316d6 ]

Before this patch, run_queue would demote glocks based on whether
there are any more holders. But if the glock has pending revokes that
haven't been written to the media, giving up the glock might end in
file system corruption if the revokes never get written due to
io errors, node crashes and fences, etc. In that case, another node
will replay the metadata blocks associated with the glock, but
because the revoke was never written, it could replay that block
even though the glock had since been granted to another node who
might have made changes.

This patch changes the logic in run_queue so that it never demotes
a glock until its count of pending revokes reaches zero.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libata: Remove extra scsi_host_put() in ata_scsi_add_hosts()

[ Upstream commit 1d72f7aec3595249dbb83291ccac041a2d676c57 ]

If the call to scsi_add_host_with_dma() in ata_scsi_add_hosts() fails,
then we may get use-after-free KASAN warns:

==================================================================
BUG: KASAN: use-after-free in kobject_put+0x24/0x180
Read of size 1 at addr ffff0026b8c80364 by task swapper/0/1
CPU: 1 PID: 1 Comm: swapper/0 Tainted: G        W         5.6.0-rc3-00004-g5a71b206ea82-dirty #1765
Hardware name: Huawei TaiShan 200 (Model 2280)/BC82AMDD, BIOS 2280-V2 CS V3.B160.01 02/24/2020
Call trace:
dump_backtrace+0x0/0x298
show_stack+0x14/0x20
dump_stack+0x118/0x190
print_address_description.isra.9+0x6c/0x3b8
__kasan_report+0x134/0x23c
kasan_report+0xc/0x18
__asan_load1+0x5c/0x68
kobject_put+0x24/0x180
put_device+0x10/0x20
scsi_host_put+0x10/0x18
ata_devres_release+0x74/0xb0
release_nodes+0x2d0/0x470
devres_release_all+0x50/0x78
really_probe+0x2d4/0x560
driver_probe_device+0x7c/0x148
device_driver_attach+0x94/0xa0
__driver_attach+0xa8/0x110
bus_for_each_dev+0xe8/0x158
driver_attach+0x30/0x40
bus_add_driver+0x220/0x2e0
driver_register+0xbc/0x1d0
__pci_register_driver+0xbc/0xd0
ahci_pci_driver_init+0x20/0x28
do_one_initcall+0xf0/0x608
kernel_init_freeable+0x31c/0x384
kernel_init+0x10/0x118
ret_from_fork+0x10/0x18

Allocated by task 5:
save_stack+0x28/0xc8
__kasan_kmalloc.isra.8+0xbc/0xd8
kasan_kmalloc+0xc/0x18
__kmalloc+0x1a8/0x280
scsi_host_alloc+0x44/0x678
ata_scsi_add_hosts+0x74/0x268
ata_host_register+0x228/0x488
ahci_host_activate+0x1c4/0x2a8
ahci_init_one+0xd18/0x1298
local_pci_probe+0x74/0xf0
work_for_cpu_fn+0x2c/0x48
process_one_work+0x488/0xc08
worker_thread+0x330/0x5d0
kthread+0x1c8/0x1d0
ret_from_fork+0x10/0x18

Freed by task 5:
save_stack+0x28/0xc8
__kasan_slab_free+0x118/0x180
kasan_slab_free+0x10/0x18
slab_free_freelist_hook+0xa4/0x1a0
kfree+0xd4/0x3a0
scsi_host_dev_release+0x100/0x148
device_release+0x7c/0xe0
kobject_put+0xb0/0x180
put_device+0x10/0x20
scsi_host_put+0x10/0x18
ata_scsi_add_hosts+0x210/0x268
ata_host_register+0x228/0x488
ahci_host_activate+0x1c4/0x2a8
ahci_init_one+0xd18/0x1298
local_pci_probe+0x74/0xf0
work_for_cpu_fn+0x2c/0x48
process_one_work+0x488/0xc08
worker_thread+0x330/0x5d0
kthread+0x1c8/0x1d0
ret_from_fork+0x10/0x18

There is also refcount issue, as well:
WARNING: CPU: 1 PID: 1 at lib/refcount.c:28 refcount_warn_saturate+0xf8/0x170

The issue is that we make an erroneous extra call to scsi_host_put()
for that host:

So in ahci_init_one()->ata_host_alloc_pinfo()->ata_host_alloc(), we setup
a device release method - ata_devres_release() - which intends to release
the SCSI hosts:

static void ata_devres_release(struct device *gendev, void *res)
{
...
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];

if (!ap)
continue;

if (ap->scsi_host)
scsi_host_put(ap->scsi_host);

}
...
}

However in the ata_scsi_add_hosts() error path, we also call
scsi_host_put() for the SCSI hosts.

Fix by removing the the scsi_host_put() calls in ata_scsi_add_hosts() and
leave this to ata_devres_release().

Fixes: f31871951b38 ("libata: separate out ata_host_alloc() and ata_host_register()")
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/x86/ptrace_syscall_32: Fix no-vDSO segfault

[ Upstream commit 630b99ab60aa972052a4202a1ff96c7e45eb0054 ]

If AT_SYSINFO is not present, don't try to call a NULL pointer.

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/faaf688265a7e1a5b944d6f8bc0f6368158306d3.1584052409.git.luto@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched: Avoid scale real weight down to zero

[ Upstream commit 26cf52229efc87e2effa9d788f9b33c40fb3358a ]

During our testing, we found a case that shares no longer
working correctly, the cgroup topology is like:

  /sys/fs/cgroup/cpu/A (shares=102400)
  /sys/fs/cgroup/cpu/A/B (shares=2)
  /sys/fs/cgroup/cpu/A/B/C (shares=1024)

  /sys/fs/cgroup/cpu/D (shares=1024)
  /sys/fs/cgroup/cpu/D/E (shares=1024)
  /sys/fs/cgroup/cpu/D/E/F (shares=1024)

The same benchmark is running in group C & F, no other tasks are
running, the benchmark is capable to consumed all the CPUs.

We suppose the group C will win more CPU resources since it could
enjoy all the shares of group A, but it's F who wins much more.

The reason is because we have group B with shares as 2, since
A->cfs_rq.load.weight == B->se.load.weight == B->shares/nr_cpus,
so A->cfs_rq.load.weight become very small.

And in calc_group_shares() we calculate shares as:

  load = max(scale_load_down(cfs_rq->load.weight), cfs_rq->avg.load_avg);
  shares = (tg_shares * load) / tg_weight;

Since the 'cfs_rq->load.weight' is too small, the load become 0
after scale down, although 'tg_shares' is 102400, shares of the se
which stand for group A on root cfs_rq become 2.

While the se of D on root cfs_rq is far more bigger than 2, so it
wins the battle.

Thus when scale_load_down() scale real weight down to 0, it's no
longer telling the real story, the caller will have the wrong
information and the calculation will be buggy.

This patch add check in scale_load_down(), so the real weight will
be >= MIN_SHARES after scale, after applied the group C wins as
expected.

Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Michael Wang <yun.wang@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/38e8e212-59a1-64b2-b247-b6d0b52d8dc1@linux.alibaba.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/versatile-fpga: Handle chained IRQs properly

[ Upstream commit 486562da598c59e9f835b551d7cf19507de2d681 ]

Enclose the chained handler with chained_irq_{enter,exit}(), so that the
muxed interrupts get properly acked.

This patch also fixes a reboot bug on OX820 SoC, where the jiffies timer
interrupt is never acked. The kernel waits a clock tick forever in
calibrate_delay_converge(), which leads to a boot hang.

Fixes: c41b16f8c9d9 ("ARM: integrator/versatile: consolidate FPGA IRQ handling code")
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200319023448.1479701-1-mans0n@gorani.run
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: st: fix missing struct parameter description

[ Upstream commit f491c6687332920e296d0209e366fe2ca7eab1c6 ]

Fix a missing struct parameter description to allow
warning free W=1 compilation.

Signed-off-by: Alain Volmat <avolmat@me.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qlcnic: Fix bad kzalloc null test

[ Upstream commit bcaeb886ade124331a6f3a5cef34a3f1484c0a03 ]

In qlcnic_83xx_get_reset_instruction_template, the variable
of null test is bad, so correct it.

Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: vxge: fix wrong __VA_ARGS__ usage

[ Upstream commit b317538c47943f9903860d83cc0060409e12d2ff ]

printk in macro vxge_debug_ll uses __VA_ARGS__ without "##" prefix,
it causes a build error when there is no variable
arguments(e.g. only fmt is specified.).

Signed-off-by: Zheng Wei <wei.zheng@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bus: sunxi-rsb: Return correct data when mixing 16-bit and 8-bit reads

[ Upstream commit a43ab30dcd4a1abcdd0d2461bf1cf7c0817f6cd3 ]

When doing a 16-bit read that returns data in the MSB byte, the
RSB_DATA register will keep the MSB byte unchanged when doing
the following 8-bit read. sunxi_rsb_read() will then return
a result that contains high byte from 16-bit read mixed with
the 8-bit result.

The consequence is that after this happens the PMIC's regmap will
look like this: (0x33 is the high byte from the 16-bit read)

% cat /sys/kernel/debug/regmap/sunxi-rsb-3a3/registers
00: 33
01: 33
02: 33
03: 33
04: 33
05: 33
06: 33
07: 33
08: 33
09: 33
0a: 33
0b: 33
0c: 33
0d: 33
0e: 33
[snip]

Fix this by masking the result of the read with the correct mask
based on the size of the read. There are no 16-bit users in the
mainline kernel, so this doesn't need to get into the stable tree.

Signed-off-by: Ondrej Jirman <megous@megous.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 4.9.219

drm/msm: Use the correct dma_sync calls in msm_gem

commit 3de433c5b38af49a5fc7602721e2ab5d39f1e69c upstream.

[subject was: drm/msm: shake fist angrily at dma-mapping]

So, using dma_sync_* for our cache needs works out w/ dma iommu ops, but
it falls appart with dma direct ops.  The problem is that, depending on
display generation, we can have either set of dma ops (mdp4 and dpu have
iommu wired to mdss node, which maps to toplevel drm device, but mdp5
has iommu wired up to the mdp sub-node within mdss).

Fixes this splat on mdp5 devices:

   Unable to handle kernel paging request at virtual address ffffffff80000000
   Mem abort info:
     ESR = 0x96000144
     Exception class = DABT (current EL), IL = 32 bits
     SET = 0, FnV = 0
     EA = 0, S1PTW = 0
   Data abort info:
     ISV = 0, ISS = 0x00000144
     CM = 1, WnR = 1
   swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000000810e4000
   [ffffffff80000000] pgd=0000000000000000
   Internal error: Oops: 96000144 [#1] SMP
   Modules linked in: btqcomsmd btqca bluetooth cfg80211 ecdh_generic ecc rfkill libarc4 panel_simple msm wcnss_ctrl qrtr_smd drm_kms_helper venus_enc venus_dec videobuf2_dma_sg videobuf2_memops drm venus_core ipv6 qrtr qcom_wcnss_pil v4l2_mem2mem qcom_sysmon videobuf2_v4l2 qmi_helpers videobuf2_common crct10dif_ce mdt_loader qcom_common videodev qcom_glink_smem remoteproc bmc150_accel_i2c bmc150_magn_i2c bmc150_accel_core bmc150_magn snd_soc_lpass_apq8016 snd_soc_msm8916_analog mms114 mc nf_defrag_ipv6 snd_soc_lpass_cpu snd_soc_apq8016_sbc industrialio_triggered_buffer kfifo_buf snd_soc_lpass_platform snd_soc_msm8916_digital drm_panel_orientation_quirks
   CPU: 2 PID: 33 Comm: kworker/2:1 Not tainted 5.3.0-rc2 #1
   Hardware name: Samsung Galaxy A5U (EUR) (DT)
   Workqueue: events deferred_probe_work_func
   pstate: 80000005 (Nzcv daif -PAN -UAO)
   pc : __clean_dcache_area_poc+0x20/0x38
   lr : arch_sync_dma_for_device+0x28/0x30
   sp : ffff0000115736a0
   x29: ffff0000115736a0 x28: 0000000000000001
   x27: ffff800074830800 x26: ffff000011478000
   x25: 0000000000000000 x24: 0000000000000001
   x23: ffff000011478a98 x22: ffff800009fd1c10
   x21: 0000000000000001 x20: ffff800075ad0a00
   x19: 0000000000000000 x18: ffff0000112b2000
   x17: 0000000000000000 x16: 0000000000000000
   x15: 00000000fffffff0 x14: ffff000011455d70
   x13: 0000000000000000 x12: 0000000000000028
   x11: 0000000000000001 x10: ffff00001106c000
   x9 : ffff7e0001d6b380 x8 : 0000000000001000
   x7 : ffff7e0001d6b380 x6 : ffff7e0001d6b382
   x5 : 0000000000000000 x4 : 0000000000001000
   x3 : 000000000000003f x2 : 0000000000000040
   x1 : ffffffff80001000 x0 : ffffffff80000000
   Call trace:
    __clean_dcache_area_poc+0x20/0x38
    dma_direct_sync_sg_for_device+0xb8/0xe8
    get_pages+0x22c/0x250 [msm]
    msm_gem_get_and_pin_iova+0xdc/0x168 [msm]
    ...

Fixes the combination of two patches:

Fixes: 0036bc73ccbe (drm/msm: stop abusing dma_map/unmap for cache)
Fixes: 449fa54d6815 (dma-direct: correct the physical addr in dma_direct_sync_sg_for_cpu/device)
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Rob Clark <robdclark@chromium.org>
[seanpaul changed subject to something more desriptive]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190730214633.17820-1-robdclark@gmail.com
Cc: nobuhiro1.iwamatsu@toshiba.co.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm_dp_mst_topology: fix broken drm_dp_sideband_parse_remote_dpcd_read()

commit a4c30a4861c54af78c4eb8b7855524c1a96d9f80 upstream.

When parsing the reply of a DP_REMOTE_DPCD_READ DPCD command the
result is wrong due to a missing idx increment.

This was never noticed since DP_REMOTE_DPCD_READ is currently not
used, but if you enable it, then it is all wrong.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e72ddac2-1dc0-100a-d816-9ac98ac009dd@xs4all.nl
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: don't set gadget->is_otg flag

commit c09b73cfac2a9317f1104169045c519c6021aa1d upstream.

This reverts
commit 6a4290cc28be1 ("usb: dwc3: gadget: set the OTG flag in dwc3 gadget driver.")

We don't yet support any of the OTG mechanisms (HNP/SRP/ADP)
and are not setting gadget->otg_caps, so don't set gadget->is_otg
flag.

If we do then we end up publishing a OTG1.0 descriptor in
the gadget descriptor which causes device enumeration to fail
if we are connected to a host with CONFIG_USB_OTG enabled.

Host side log without this patch

[   96.720453] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[   96.901391] usb 1-1: Dual-Role OTG device on non-HNP port
[   96.907552] usb 1-1: set a_alt_hnp_support failed: -32
[   97.060447] usb 1-1: new high-speed USB device number 3 using xhci-hcd
[   97.241378] usb 1-1: Dual-Role OTG device on non-HNP port
[   97.247536] usb 1-1: set a_alt_hnp_support failed: -32
[   97.253606] usb usb1-port1: attempt power cycle
[   97.960449] usb 1-1: new high-speed USB device number 4 using xhci-hcd
[   98.141383] usb 1-1: Dual-Role OTG device on non-HNP port
[   98.147540] usb 1-1: set a_alt_hnp_support failed: -32
[   98.300453] usb 1-1: new high-speed USB device number 5 using xhci-hcd
[   98.481391] usb 1-1: Dual-Role OTG device on non-HNP port
[   98.487545] usb 1-1: set a_alt_hnp_support failed: -32
[   98.493532] usb usb1-port1: unable to enumerate USB device

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Fix size of __early_cpu_boot_status

commit 61cf61d81e326163ce1557ceccfca76e11d0e57c upstream.

__early_cpu_boot_status is of type long. Use quad
assembler directive to allocate proper size.

Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Arun KS <arunks@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/msm: stop abusing dma_map/unmap for cache

commit 0036bc73ccbe7e600a3468bf8e8879b122252274 upstream.

Recently splats like this started showing up:

   WARNING: CPU: 4 PID: 251 at drivers/iommu/dma-iommu.c:451 __iommu_dma_unmap+0xb8/0xc0
   Modules linked in: ath10k_snoc ath10k_core fuse msm ath mac80211 uvcvideo cfg80211 videobuf2_vmalloc videobuf2_memops vide
   CPU: 4 PID: 251 Comm: kworker/u16:4 Tainted: G        W         5.2.0-rc5-next-20190619+ #2317
   Hardware name: LENOVO 81JL/LNVNB161216, BIOS 9UCN23WW(V1.06) 10/25/2018
   Workqueue: msm msm_gem_free_work [msm]
   pstate: 80c00005 (Nzcv daif +PAN +UAO)
   pc : __iommu_dma_unmap+0xb8/0xc0
   lr : __iommu_dma_unmap+0x54/0xc0
   sp : ffff0000119abce0
   x29: ffff0000119abce0 x28: 0000000000000000
   x27: ffff8001f9946648 x26: ffff8001ec271068
   x25: 0000000000000000 x24: ffff8001ea3580a8
   x23: ffff8001f95ba010 x22: ffff80018e83ba88
   x21: ffff8001e548f000 x20: fffffffffffff000
   x19: 0000000000001000 x18: 00000000c00001fe
   x17: 0000000000000000 x16: 0000000000000000
   x15: ffff000015b70068 x14: 0000000000000005
   x13: 0003142cc1be1768 x12: 0000000000000001
   x11: ffff8001f6de9100 x10: 0000000000000009
   x9 : ffff000015b78000 x8 : 0000000000000000
   x7 : 0000000000000001 x6 : fffffffffffff000
   x5 : 0000000000000fff x4 : ffff00001065dbc8
   x3 : 000000000000000d x2 : 0000000000001000
   x1 : fffffffffffff000 x0 : 0000000000000000
   Call trace:
    __iommu_dma_unmap+0xb8/0xc0
    iommu_dma_unmap_sg+0x98/0xb8
    put_pages+0x5c/0xf0 [msm]
    msm_gem_free_work+0x10c/0x150 [msm]
    process_one_work+0x1e0/0x330
    worker_thread+0x40/0x438
    kthread+0x12c/0x130
    ret_from_fork+0x10/0x18
   ---[ end trace afc0dc5ab81a06bf ]---

Not quite sure what triggered that, but we really shouldn't be abusing
dma_{map,unmap}_sg() for cache maint.

Cc: Stephen Boyd <sboyd@kernel.org>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190630124735.27786-1-robdclark@gmail.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: qcom: rcg: Return failure for RCG update

commit 21ea4b62e1f3dc258001a68da98c9663a9dbd6c7 upstream.

In case of update config failure, return -EBUSY, so that consumers could
handle the failure gracefully.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lkml.kernel.org/r/1557339895-21952-2-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/cm: Update num_paths in cma_resolve_iboe_route error flow

commit 987914ab841e2ec281a35b54348ab109b4c0bb4e upstream.

After a successful allocation of path_rec, num_paths is set to 1, but any
error after such allocation will leave num_paths uncleared.

This causes to de-referencing a NULL pointer later on. Hence, num_paths
needs to be set back to 0 if such an error occurs.

The following crash from syzkaller revealed it.

  kasan: CONFIG_KASAN_INLINE enabled
  kasan: GPF could be caused by NULL-ptr deref or user memory access
  general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
  CPU: 0 PID: 357 Comm: syz-executor060 Not tainted 4.18.0+ #311
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
  rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014
  RIP: 0010:ib_copy_path_rec_to_user+0x94/0x3e0
  Code: f1 f1 f1 f1 c7 40 0c 00 00 f4 f4 65 48 8b 04 25 28 00 00 00 48 89
  45 c8 31 c0 e8 d7 60 24 ff 48 8d 7b 4c 48 89 f8 48 c1 e8 03 <42> 0f b6
  14 30 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85
  RSP: 0018:ffff88006586f980 EFLAGS: 00010207
  RAX: 0000000000000009 RBX: 0000000000000000 RCX: 1ffff1000d5fe475
  RDX: ffff8800621e17c0 RSI: ffffffff820d45f9 RDI: 000000000000004c
  RBP: ffff88006586fa50 R08: ffffed000cb0df73 R09: ffffed000cb0df72
  R10: ffff88006586fa70 R11: ffffed000cb0df73 R12: 1ffff1000cb0df30
  R13: ffff88006586fae8 R14: dffffc0000000000 R15: ffff88006aff2200
  FS: 00000000016fc880(0000) GS:ffff88006d000000(0000)
  knlGS:0000000000000000
  CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000020000040 CR3: 0000000063fec000 CR4: 00000000000006b0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
  ? ib_copy_path_rec_from_user+0xcc0/0xcc0
  ? __mutex_unlock_slowpath+0xfc/0x670
  ? wait_for_completion+0x3b0/0x3b0
  ? ucma_query_route+0x818/0xc60
  ucma_query_route+0x818/0xc60
  ? ucma_listen+0x1b0/0x1b0
  ? sched_clock_cpu+0x18/0x1d0
  ? sched_clock_cpu+0x18/0x1d0
  ? ucma_listen+0x1b0/0x1b0
  ? ucma_write+0x292/0x460
  ucma_write+0x292/0x460
  ? ucma_close_id+0x60/0x60
  ? sched_clock_cpu+0x18/0x1d0
  ? sched_clock_cpu+0x18/0x1d0
  __vfs_write+0xf7/0x620
  ? ucma_close_id+0x60/0x60
  ? kernel_read+0x110/0x110
  ? time_hardirqs_on+0x19/0x580
  ? lock_acquire+0x18b/0x3a0
  ? finish_task_switch+0xf3/0x5d0
  ? _raw_spin_unlock_irq+0x29/0x40
  ? _raw_spin_unlock_irq+0x29/0x40
  ? finish_task_switch+0x1be/0x5d0
  ? __switch_to_asm+0x34/0x70
  ? __switch_to_asm+0x40/0x70
  ? security_file_permission+0x172/0x1e0
  vfs_write+0x192/0x460
  ksys_write+0xc6/0x1a0
  ? __ia32_sys_read+0xb0/0xb0
  ? entry_SYSCALL_64_after_hwframe+0x3e/0xbe
  ? do_syscall_64+0x1d/0x470
  do_syscall_64+0x9e/0x470
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: 3c86aa70bf67 ("RDMA/cm: Add RDMA CM support for IBoE devices")
Link: https://lore.kernel.org/r/20200318101741.47211-1-leon@kernel.org
Signed-off-by: Avihai Horon <avihaih@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: RFCOMM: fix ODEBUG bug in rfcomm_dev_ioctl

commit 71811cac8532b2387b3414f7cd8fe9e497482864 upstream.

Needn't call 'rfcomm_dlc_put' here, because 'rfcomm_dlc_exists' didn't
increase dlc->refcnt.

Reported-by: syzbot+4496e82090657320efc6@syzkaller.appspotmail.com
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Suggested-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ceph: canonicalize server path in place

commit b27a939e8376a3f1ed09b9c33ef44d20f18ec3d0 upstream.

syzbot reported that 4fbc0c711b24 ("ceph: remove the extra slashes in
the server path") had caused a regression where an allocation could be
done under a spinlock -- compare_mount_options() is called by sget_fc()
with sb_lock held.

We don't really need the supplied server path, so canonicalize it
in place and compare it directly.  To make this work, the leading
slash is kept around and the logic in ceph_real_mount() to skip it
is restored.  CEPH_MSG_CLIENT_SESSION now reports the same (i.e.
canonicalized) path, with the leading slash of course.

Fixes: 4fbc0c711b24 ("ceph: remove the extra slashes in the server path")
Reported-by: syzbot+98704a51af8e3d9425a9@syzkaller.appspotmail.com
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ceph: remove the extra slashes in the server path

commit 4fbc0c711b2464ee1551850b85002faae0b775d5 upstream.

It's possible to pass the mount helper a server path that has more
than one contiguous slash character. For example:

  $ mount -t ceph 192.168.195.165:40176:/// /mnt/cephfs/

In the MDS server side the extra slashes of the server path will be
treated as snap dir, and then we can get the following debug logs:

  ceph:  mount opening path //
  ceph:  open_root_inode opening '//'
  ceph:  fill_trace 0000000059b8a3bc is_dentry 0 is_target 1
  ceph:  alloc_inode 00000000dc4ca00b
  ceph:  get_inode created new inode 00000000dc4ca00b 1.ffffffffffffffff ino 1
  ceph:  get_inode on 1=1.ffffffffffffffff got 00000000dc4ca00b

And then when creating any new file or directory under the mount
point, we can hit the following BUG_ON in ceph_fill_trace():

  BUG_ON(ceph_snap(dir) != dvino.snap);

Have the client ignore the extra slashes in the server path when
mounting. This will also canonicalize the path, so that identical mounts
can be consilidated.

1) "//mydir1///mydir//"
2) "/mydir1/mydir"
3) "/mydir1/mydir/"

Regardless of the internal treatment of these paths, the kernel still
stores the original string including the leading '/' for presentation
to userland.

URL: https://tracker.ceph.com/issues/42771
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/hfi1: Fix memory leaks in sysfs registration and unregistration

commit 5c15abc4328ad696fa61e2f3604918ed0c207755 upstream.

When the hfi1 driver is unloaded, kmemleak will report the following
issue:

unreferenced object 0xffff8888461a4c08 (size 8):
comm "kworker/0:0", pid 5, jiffies 4298601264 (age 2047.134s)
hex dump (first 8 bytes):
73 64 6d 61 30 00 ff ff sdma0...
backtrace:
[<00000000311a6ef5>] kvasprintf+0x62/0xd0
[<00000000ade94d9f>] kobject_set_name_vargs+0x1c/0x90
[<0000000060657dbb>] kobject_init_and_add+0x5d/0xb0
[<00000000346fe72b>] 0xffffffffa0c5ecba
[<000000006cfc5819>] 0xffffffffa0c866b9
[<0000000031c65580>] 0xffffffffa0c38e87
[<00000000e9739b3f>] local_pci_probe+0x41/0x80
[<000000006c69911d>] work_for_cpu_fn+0x16/0x20
[<00000000601267b5>] process_one_work+0x171/0x380
[<0000000049a0eefa>] worker_thread+0x1d1/0x3f0
[<00000000909cf2b9>] kthread+0xf8/0x130
[<0000000058f5f874>] ret_from_fork+0x35/0x40

This patch fixes the issue by:

- Releasing dd->per_sdma[i].kobject in hfi1_unregister_sysfs().
  - This will fix the memory leak.

- Calling kobject_put() to unwind operations only for those entries in
   dd->per_sdma[] whose operations have succeeded (including the current
   one that has just failed) in hfi1_verbs_register_sysfs().

Cc: <stable@vger.kernel.org>
Fixes: 0cb2aa690c7e ("IB/hfi1: Add sysfs interface for affinity setup")
Link: https://lore.kernel.org/r/20200326163807.21129.27371.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/hfi1: Call kobject_put() when kobject_init_and_add() fails

commit dfb5394f804ed4fcea1fc925be275a38d66712ab upstream.

When kobject_init_and_add() returns an error in the function
hfi1_create_port_files(), the function kobject_put() is not called for the
corresponding kobject, which potentially leads to memory leak.

This patch fixes the issue by calling kobject_put() even if
kobject_init_and_add() fails.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200326163813.21129.44280.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: jz4740-i2s: Fix divider written at incorrect offset in register

commit 9401d5aa328e64617d87abd59af1c91cace4c3e4 upstream.

The 4-bit divider value was written at offset 8, while the jz4740
programming manual locates it at offset 0.

Fixes: 26b0aad80a86 ("ASoC: jz4740: Add dynamic sampling rate support to jz4740-i2s")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200306222931.39664-2-paul@crapouillou.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools/accounting/getdelays.c: fix netlink attribute length

commit 4054ab64e29bb05b3dfe758fff3c38a74ba753bb upstream.

A recent change to the netlink code: 6e237d099fac ("netlink: Relax attr
validation for fixed length types") logs a warning when programs send
messages with invalid attributes (e.g., wrong length for a u32).  Yafang
reported this error message for tools/accounting/getdelays.c.

send_cmd() is wrongly adding 1 to the attribute length.  As noted in
include/uapi/linux/netlink.h nla_len should be NLA_HDRLEN + payload
length, so drop the +1.

Fixes: 9e06d3f9f6b1 ("per task delay accounting taskstats interface: documentation fix")
Reported-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Yafang Shao <laoar.shao@gmail.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Shailabh Nagar <nagar@watson.ibm.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200327173111.63922-1-dsahern@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

random: always use batched entropy for get_random_u{32,64}

commit 69efea712f5b0489e67d07565aad5c94e09a3e52 upstream.

It turns out that RDRAND is pretty slow. Comparing these two
constructions:

  for (i = 0; i < CHACHA_BLOCK_SIZE; i += sizeof(ret))
    arch_get_random_long(&ret);

and

  long buf[CHACHA_BLOCK_SIZE / sizeof(long)];
  extract_crng((u8 *)buf);

it amortizes out to 352 cycles per long for the top one and 107 cycles
per long for the bottom one, on Coffee Lake Refresh, Intel Core i9-9880H.

And importantly, the top one has the drawback of not benefiting from the
real rng, whereas the bottom one has all the nice benefits of using our
own chacha rng. As get_random_u{32,64} gets used in more places (perhaps
beyond what it was originally intended for when it was introduced as
get_random_{int,long} back in the md5 monstrosity era), it seems like it
might be a good thing to strengthen its posture a tiny bit. Doing this
should only be stronger and not any weaker because that pool is already
initialized with a bunch of rdrand data (when available). This way, we
get the benefits of the hardware rng as well as our own rng.

Another benefit of this is that we no longer hit pitfalls of the recent
stream of AMD bugs in RDRAND. One often used code pattern for various
things is:

  do {
   val = get_random_u32();
  } while (hash_table_contains_key(val));

That recent AMD bug rendered that pattern useless, whereas we're really
very certain that chacha20 output will give pretty distributed numbers,
no matter what.

So, this simplification seems better both from a security perspective
and from a performance perspective.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20200221201037.30231-1-Jason@zx2c4.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: phy: micrel: kszphy_resume(): add delay after genphy_resume() before accessing PHY registers

[ Upstream commit 6110dff776f7fa65c35850ef65b41d3b39e2fac2 ]

After the power-down bit is cleared, the chip internally triggers a
global reset. According to the KSZ9031 documentation, we have to wait at
least 1ms for the reset to finish.

If the chip is accessed during reset, read will return 0xffff, while
write will be ignored. Depending on the system performance and MDIO bus
speed, we may or may not run in to this issue.

This bug was discovered on an iMX6QP system with KSZ9031 PHY and
attached PHY interrupt line. If IRQ was used, the link status update was
lost. In polling mode, the link status update was always correct.

The investigation showed, that during a read-modify-write access, the
read returned 0xffff (while the chip was still in reset) and
corresponding write hit the chip _after_ reset and triggered (due to the
0xffff) another reset in an undocumented bit (register 0x1f, bit 1),
resulting in the next write being lost due to the new reset cycle.

This patch fixes the issue by adding a 1...2 ms sleep after the
genphy_resume().

Fixes: 836384d2501d ("net: phy: micrel: Add specific suspend")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

slcan: Don't transmit uninitialized stack data in padding

[ Upstream commit b9258a2cece4ec1f020715fe3554bc2e360f6264 ]

struct can_frame contains some padding which is not explicitly zeroed in
slc_bump. This uninitialized data will then be transmitted if the stack
initialization hardening feature is not enabled (CONFIG_INIT_STACK_ALL).

This commit just zeroes the whole struct including the padding.

Signed-off-by: Richard Palethorpe <rpalethorpe@suse.com>
Fixes: a1044e36e457 ("can: add slcan driver for serial/USB-serial CAN adapters")
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: linux-can@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: security@kernel.org
Cc: wg@grandegger.com
Cc: mkl@pengutronix.de
Cc: davem@davemloft.net
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: stmmac: dwmac1000: fix out-of-bounds mac address reg setting

[ Upstream commit 3e1221acf6a8f8595b5ce354bab4327a69d54d18 ]

Commit 9463c4455900 ("net: stmmac: dwmac1000: Clear unused address
entries") cleared the unused mac address entries, but introduced an
out-of bounds mac address register programming bug -- After setting
the secondary unicast mac addresses, the "reg" value has reached
netdev_uc_count() + 1, thus we should only clear address entries
if (addr < perfect_addr_number)

Fixes: 9463c4455900 ("net: stmmac: dwmac1000: Clear unused address entries")
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: bcm_sf2: Ensure correct sub-node is parsed

[ Upstream commit afa3b592953bfaecfb4f2f335ec5f935cff56804 ]

When the bcm_sf2 was converted into a proper platform device driver and
used the new dsa_register_switch() interface, we would still be parsing
the legacy DSA node that contained all the port information since the
platform firmware has intentionally maintained backward and forward
compatibility to client programs. Ensure that we do parse the correct
node, which is "ports" per the revised DSA binding.

Fixes: d9338023fb8e ("net: dsa: bcm_sf2: Make it a real platform device driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: mempolicy: require at least one nodeid for MPOL_PREFERRED

commit aa9f7d5172fac9bf1f09e678c35e287a40a7b7dd upstream.

Using an empty (malformed) nodelist that is not caught during mount option
parsing leads to a stack-out-of-bounds access.

The option string that was used was: "mpol=prefer:,".  However,
MPOL_PREFERRED requires a single node number, which is not being provided
here.

Add a check that 'nodes' is not empty after parsing for MPOL_PREFERRED's
nodeid.

Fixes: 095f1fc4ebf3 ("mempolicy: rework shmem mpol parsing and display")
Reported-by: Entropy Moe <3ntr0py1337@gmail.com>
Reported-by: syzbot+b055b1a6b2b958707a21@syzkaller.appspotmail.com
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: syzbot+b055b1a6b2b958707a21@syzkaller.appspotmail.com
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Link: http://lkml.kernel.org/r/89526377-7eb6-b662-e1d8-4430928abde9@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

padata: always acquire cpu_hotplug_lock before pinst->lock

commit 38228e8848cd7dd86ccb90406af32de0cad24be3 upstream.

lockdep complains when padata's paths to update cpumasks via CPU hotplug
and sysfs are both taken:

  # echo 0 > /sys/devices/system/cpu/cpu1/online
  # echo ff > /sys/kernel/pcrypt/pencrypt/parallel_cpumask

  ======================================================
  WARNING: possible circular locking dependency detected
  5.4.0-rc8-padata-cpuhp-v3+ #1 Not tainted
  ------------------------------------------------------
  bash/205 is trying to acquire lock:
  ffffffff8286bcd0 (cpu_hotplug_lock.rw_sem){++++}, at: padata_set_cpumask+0x2b/0x120

  but task is already holding lock:
  ffff8880001abfa0 (&pinst->lock){+.+.}, at: padata_set_cpumask+0x26/0x120

  which lock already depends on the new lock.

padata doesn't take cpu_hotplug_lock and pinst->lock in a consistent
order.  Which should be first?  CPU hotplug calls into padata with
cpu_hotplug_lock already held, so it should have priority.

Fixes: 6751fb3c0e0c ("padata: Use get_online_cpus/put_online_cpus")
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: tag_brcm: Fix skb->fwd_offload_mark location

When the backport of upstream commit
0e62f543bed03a64495bd2651d4fe1aa4bcb7fe5 ("net: dsa: Fix duplicate
frames flooded by learning") was done the assignment of
skb->fwd_offload_mark would land in brcm_tag_xmit() which is incorrect,
it should have been in brcm_tag_rcv().

Fixes: 5e845dc62f38 ("net: dsa: Fix duplicate frames flooded by learning")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

coresight: do not use the BIT() macro in the UAPI header

commit 9b6eaaf3db5e5888df7bca7fed7752a90f7fd871 upstream.

The BIT() macro definition is not available for the UAPI headers
(moreover, it can be defined differently in the user space); replace
its usage with the _BITUL() macro that is defined in <linux/const.h>.

Fixes: 237483aa5cf4 ("coresight: stm: adding driver for CoreSight STM component")
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200324042213.GA10452@asgard.redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

blk-mq: Allow blocking queue tag iter callbacks

commit 530ca2c9bd6949c72c9b5cfc330cb3dbccaa3f5b upstream.

A recent commit runs tag iterator callbacks under the rcu read lock,
but existing callbacks do not satisfy the non-blocking requirement.
The commit intended to prevent an iterator from accessing a queue that's
being modified. This patch fixes the original issue by taking a queue
reference instead of reading it, which allows callbacks to make blocking
calls.

Fixes: f5bbbbe4d6357 ("blk-mq: sync the update nr_hw_queues with blk_mq_queue_tag_busy_iter")
Acked-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Giuliano Procida <gprocida@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

blk-mq: sync the update nr_hw_queues with blk_mq_queue_tag_busy_iter

commit f5bbbbe4d63577026f908a809f22f5fd5a90ea1f upstream.

For blk-mq, part_in_flight/rw will invoke blk_mq_in_flight/rw to
account the inflight requests. It will access the queue_hw_ctx and
nr_hw_queues w/o any protection. When updating nr_hw_queues and
blk_mq_in_flight/rw occur concurrently, panic comes up.

Before update nr_hw_queues, the q will be frozen. So we could use
q_usage_counter to avoid the race. percpu_ref_is_zero is used here
so that we will not miss any in-flight request. The access to
nr_hw_queues and queue_hw_ctx in blk_mq_queue_tag_busy_iter are
under rcu critical section, __blk_mq_update_nr_hw_queues could use
synchronize_rcu to ensure the zeroed q_usage_counter to be globally
visible.

Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Cc: Giuliano Procida <gprocida@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/etnaviv: replace MMU flush marker with flush sequence

commit 4900dda90af2cb13bc1d4c12ce94b98acc8fe64e upstream.

If a MMU is shared between multiple GPUs, all of them need to flush their
TLBs, so a single marker that gets reset on the first flush won't do.
Replace the flush marker with a sequence number, so that it's possible to
check if the TLB is in sync with the current page table state for each GPU.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sctp: fix possibly using a bad saddr with a given dst

[ Upstream commit 582eea230536a6f104097dd46205822005d5fe3a ]

Under certain circumstances, depending on the order of addresses on the
interfaces, it could be that sctp_v[46]_get_dst() would return a dst
with a mismatched struct flowi.

For example, if when walking through the bind addresses and the first
one is not a match, it saves the dst as a fallback (added in
410f03831c07), but not the flowi. Then if the next one is also not a
match, the previous dst will be returned but with the flowi information
for the 2nd address, which is wrong.

The fix is to use a locally stored flowi that can be used for such
attempts, and copy it to the parameter only in case it is a possible
match, together with the corresponding dst entry.

The patch updates IPv6 code mostly just to be in sync. Even though the issue
is also present there, it fallback is not expected to work with IPv6.

Fixes: 410f03831c07 ("sctp: add routing output fallback")
Reported-by: Jin Meng <meng.a.jin@nokia-sbell.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Tested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sctp: fix refcount bug in sctp_wfree

[ Upstream commit 5c3e82fe159622e46e91458c1a6509c321a62820 ]

We should iterate over the datamsgs to move
all chunks(skbs) to newsk.

The following case cause the bug:
for the trouble SKB, it was in outq->transmitted list

sctp_outq_sack
        sctp_check_transmitted
                SKB was moved to outq->sacked list
        then throw away the sack queue
                SKB was deleted from outq->sacked
(but it was held by datamsg at sctp_datamsg_to_asoc
So, sctp_wfree was not called here)

then migrate happened

        sctp_for_each_tx_datachunk(
        sctp_clear_owner_w);
        sctp_assoc_migrate();
        sctp_for_each_tx_datachunk(
        sctp_set_owner_w);
SKB was not in the outq, and was not changed to newsk

finally

__sctp_outq_teardown
        sctp_chunk_put (for another skb)
                sctp_datamsg_put
                        __kfree_skb(msg->frag_list)
                                sctp_wfree (for SKB)
SKB->sk was still oldsk (skb->sk != asoc->base.sk).

Reported-and-tested-by: syzbot+cea71eec5d6de256d54d@syzkaller.appspotmail.com
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Acked-by: Marcelo Ricardo Leitner <mleitner@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net, ip_tunnel: fix interface lookup with no key

[ Upstream commit 25629fdaff2ff509dd0b3f5ff93d70a75e79e0a1 ]

when creating a new ipip interface with no local/remote configuration,
the lookup is done with TUNNEL_NO_KEY flag, making it impossible to
match the new interface (only possible match being fallback or metada
case interface); e.g: `ip link add tunl1 type ipip dev eth0`

To fix this case, adding a flag check before the key comparison so we
permit to match an interface with no local/remote config; it also avoids
breaking possible userland tools relying on TUNNEL_NO_KEY flag and
uninitialised key.

context being on my side, I'm creating an extra ipip interface attached
to the physical one, and moving it to a dedicated namespace.

Fixes: c54419321455 ("GRE: Refactor GRE tunneling code.")
Signed-off-by: William Dauchy <w.dauchy@criteo.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv4: fix a RCU-list lock in fib_triestat_seq_show

[ Upstream commit fbe4e0c1b298b4665ee6915266c9d6c5b934ef4a ]

fib_triestat_seq_show() calls hlist_for_each_entry_rcu(tb, head,
tb_hlist) without rcu_read_lock() will trigger a warning,

 net/ipv4/fib_trie.c:2579 RCU-list traversed in non-reader section!!

 other info that might help us debug this:

 rcu_scheduler_active = 2, debug_locks = 1
 1 lock held by proc01/115277:
  #0: c0000014507acf00 (&p->lock){+.+.}-{3:3}, at: seq_read+0x58/0x670

 Call Trace:
  dump_stack+0xf4/0x164 (unreliable)
  lockdep_rcu_suspicious+0x140/0x164
  fib_triestat_seq_show+0x750/0x880
  seq_read+0x1a0/0x670
  proc_reg_read+0x10c/0x1b0
  __vfs_read+0x3c/0x70
  vfs_read+0xac/0x170
  ksys_read+0x7c/0x140
  system_call+0x5c/0x68

Fix it by adding a pair of rcu_read_lock/unlock() and use
cond_resched_rcu() to avoid the situation where walking of a large
number of items  may prevent scheduling for a long time.

Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/bochs: downgrade pci_request_region failure from error to warning

[ Upstream commit 8c34cd1a7f089dc03933289c5d4a4d1489549828 ]

Shutdown of firmware framebuffer has a bunch of problems.  Because
of this the framebuffer region might still be reserved even after
drm_fb_helper_remove_conflicting_pci_framebuffers() returned.

Don't consider pci_request_region() failure for the framebuffer
region as fatal error to workaround this issue.

Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20200313084152.2734-1-kraxel@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

l2tp: fix race between l2tp_session_delete() and l2tp_tunnel_closeall()

commit b228a94066406b6c456321d69643b0d7ce11cfa6 upstream.

There are several ways to remove L2TP sessions:

  * deleting a session explicitly using the netlink interface (with
    L2TP_CMD_SESSION_DELETE),
  * deleting the session's parent tunnel (either by closing the
    tunnel's file descriptor or using the netlink interface),
  * closing the PPPOL2TP file descriptor of a PPP pseudo-wire.

In some cases, when these methods are used concurrently on the same
session, the session can be removed twice, leading to use-after-free
bugs.

This patch adds a 'dead' flag, used by l2tp_session_delete() and
l2tp_tunnel_closeall() to prevent them from stepping on each other's
toes.

The session deletion path used when closing a PPPOL2TP file descriptor
doesn't need to be adapted. It already has to ensure that a session
remains valid for the lifetime of its PPPOL2TP file descriptor.
So it takes an extra reference on the session in the ->session_close()
callback (pppol2tp_session_close()), which is eventually dropped
in the ->sk_destruct() callback of the PPPOL2TP socket
(pppol2tp_session_destruct()).
Still, __l2tp_session_unhash() and l2tp_session_queue_purge() can be
called twice and even concurrently for a given session, but thanks to
proper locking and re-initialisation of list fields, this is not an
issue.

Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

l2tp: ensure sessions are freed after their PPPOL2TP socket

commit cdd10c9627496ad25c87ce6394e29752253c69d3 upstream.

If l2tp_tunnel_delete() or l2tp_tunnel_closeall() deletes a session
right after pppol2tp_release() orphaned its socket, then the 'sock'
variable of the pppol2tp_session_close() callback is NULL. Yet the
session is still used by pppol2tp_release().

Therefore we need to take an extra reference in any case, to prevent
l2tp_tunnel_delete() or l2tp_tunnel_closeall() from freeing the session.

Since the pppol2tp_session_close() callback is only set if the session
is associated to a PPPOL2TP socket and that both l2tp_tunnel_delete()
and l2tp_tunnel_closeall() hold the PPPOL2TP socket before calling
pppol2tp_session_close(), we're sure that pppol2tp_session_close() and
pppol2tp_session_destruct() are paired and called in the right order.
So the reference taken by the former will be released by the later.

Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.9.218

perf map: Fix off by one in strncpy() size argument

commit db2c549407d4a76563c579e4768f7d6d32afefba upstream.

This patch fixes an off-by-one error in strncpy size argument in
tools/perf/util/map.c. The issue is that in:

        strncmp(filename, "/system/lib/", 11)

the passed string literal: "/system/lib/" has 12 bytes (without the NULL
byte) and the passed size argument is 11. As a result, the logic won't
match the ending "/" byte and will pass filepaths that are stored in
other directories e.g. "/system/libmalicious/bin" or just
"/system/libmalicious".

This functionality seems to be present only on Android. I assume the
/system/ directory is only writable by the root user, so I don't think
this bug has much (or any) security impact.

Fixes: eca818369996 ("perf tools: Add automatic remapping of Android libraries")
Signed-off-by: disconnect3d <dominik.b.czarnota@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Keeping <john@metanate.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Lentine <mlentine@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200309104855.3775-1-dominik.b.czarnota@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: alternative: fix build with clang integrated assembler

commit 6f5459da2b8736720afdbd67c4bd2d1edba7d0e3 upstream.

Building an arm64 defconfig with clang's integrated assembler, this error
occurs:
    <instantiation>:2:2: error: unrecognized instruction mnemonic
     _ASM_EXTABLE 9999b, 9f
     ^
    arch/arm64/mm/cache.S:50:1: note: while in macro instantiation
    user_alt 9f, "dc cvau, x4", "dc civac, x4", 0
    ^

While GNU as seems fine with case-sensitive macro instantiations, clang
doesn't, so use the actual macro name (_asm_extable) as in the rest of
the file.

Also checked that the generated assembly matches the GCC output.

Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Fixes: 290622efc76e ("arm64: fix "dc cvau" cache operation on errata-affected core")
Link: https://github.com/ClangBuiltLinux/linux/issues/924
Signed-off-by: Ilie Halip <ilie.halip@gmail.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ks8851-ml: Fix IO operations, again

commit 8262e6f9b1034ede34548a04dec4c302d92c9497 upstream.

This patch reverts 58292104832f ("net: ks8851-ml: Fix 16-bit IO operation")
and edacb098ea9c ("net: ks8851-ml: Fix 16-bit data access"), because it
turns out these were only necessary due to buggy hardware. This patch adds
a check for such a buggy hardware to prevent any such mistakes again.

While working further on the KS8851 driver, it came to light that the
KS8851-16MLL is capable of switching bus endianness by a hardware strap,
EESK pin. If this strap is incorrect, the IO accesses require such endian
swapping as is being reverted by this patch. Such swapping also impacts
the performance significantly.

Hence, in addition to removing it, detect that the hardware is broken,
report to user, and fail to bind with such hardware.

Fixes: 58292104832f ("net: ks8851-ml: Fix 16-bit IO operation")
Fixes: edacb098ea9c ("net: ks8851-ml: Fix 16-bit data access")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Petr Stetiar <ynezz@true.cz>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: Explicitly memset the bpf_attr structure

commit 8096f229421f7b22433775e928d506f0342e5907 upstream.

For the bpf syscall, we are relying on the compiler to properly zero out
the bpf_attr union that we copy userspace data into. Unfortunately that
doesn't always work properly, padding and other oddities might not be
correctly zeroed, and in some tests odd things have been found when the
stack is pre-initialized to other values.

Fix this by explicitly memsetting the structure to 0 before using it.

Reported-by: Maciej Żenczykowski <maze@google.com>
Reported-by: John Stultz <john.stultz@linaro.org>
Reported-by: Alexander Potapenko <glider@google.com>
Reported-by: Alistair Delva <adelva@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://android-review.googlesource.com/c/kernel/common/+/1235490
Link: https://lore.kernel.org/bpf/20200320094813.GA421650@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vt: vt_ioctl: fix use-after-free in vt_in_use()

commit 7cf64b18b0b96e751178b8d0505d8466ff5a448f upstream.

vt_in_use() dereferences console_driver->ttys[i] without proper locking.
This is broken because the tty can be closed and freed concurrently.

We could fix this by using 'READ_ONCE(console_driver->ttys[i]) != NULL'
and skipping the check of tty_struct::count.  But, looking at
console_driver->ttys[i] isn't really appropriate anyway because even if
it is NULL the tty can still be in the process of being closed.

Instead, fix it by making vt_in_use() require console_lock() and check
whether the vt is allocated and has port refcount > 1.  This works since
following the patch "vt: vt_ioctl: fix VT_DISALLOCATE freeing in-use
virtual console" the port refcount is incremented while the vt is open.

Reproducer (very unreliable, but it worked for me after a few minutes):

#include <fcntl.h>
#include <linux/vt.h>

int main()
{
int fd, nproc;
struct vt_stat state;
char ttyname[16];

fd = open("/dev/tty10", O_RDONLY);
for (nproc = 1; nproc < 8; nproc *= 2)
fork();
for (;;) {
sprintf(ttyname, "/dev/tty%d", rand() % 8);
close(open(ttyname, O_RDONLY));
ioctl(fd, VT_GETSTATE, &state);
}
}

KASAN report:

BUG: KASAN: use-after-free in vt_in_use drivers/tty/vt/vt_ioctl.c:48 [inline]
BUG: KASAN: use-after-free in vt_ioctl+0x1ad3/0x1d70 drivers/tty/vt/vt_ioctl.c:657
Read of size 4 at addr ffff888065722468 by task syz-vt2/132

CPU: 0 PID: 132 Comm: syz-vt2 Not tainted 5.6.0-rc5-00130-g089b6d3654916 #13
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20191223_100556-anatol 04/01/2014
Call Trace:
 [...]
 vt_in_use drivers/tty/vt/vt_ioctl.c:48 [inline]
 vt_ioctl+0x1ad3/0x1d70 drivers/tty/vt/vt_ioctl.c:657
 tty_ioctl+0x9db/0x11b0 drivers/tty/tty_io.c:2660
 [...]

Allocated by task 136:
 [...]
 kzalloc include/linux/slab.h:669 [inline]
 alloc_tty_struct+0x96/0x8a0 drivers/tty/tty_io.c:2982
 tty_init_dev+0x23/0x350 drivers/tty/tty_io.c:1334
 tty_open_by_driver drivers/tty/tty_io.c:1987 [inline]
 tty_open+0x3ca/0xb30 drivers/tty/tty_io.c:2035
 [...]

Freed by task 41:
 [...]
 kfree+0xbf/0x200 mm/slab.c:3757
 free_tty_struct+0x8d/0xb0 drivers/tty/tty_io.c:177
 release_one_tty+0x22d/0x2f0 drivers/tty/tty_io.c:1468
 process_one_work+0x7f1/0x14b0 kernel/workqueue.c:2264
 worker_thread+0x8b/0xc80 kernel/workqueue.c:2410
 [...]

Fixes: 4001d7b7fc27 ("vt: push down the tty lock so we can see what is left to tackle")
Cc: <stable@vger.kernel.org> # v3.4+
Acked-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20200322034305.210082-3-ebiggers@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

locking/atomic, kref: Add kref_read()

commit 2c935bc57221cc2edc787c72ea0e2d30cdcd3d5e upstream.

Since we need to change the implementation, stop exposing internals.

Provide kref_read() to read the current reference count; typically
used for debug messages.

Kills two anti-patterns:

atomic_read(&kref->refcount)
kref->refcount.counter

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
[only add kref_read() to kref.h for stable backports - gregkh]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vt: vt_ioctl: fix VT_DISALLOCATE freeing in-use virtual console

commit ca4463bf8438b403596edd0ec961ca0d4fbe0220 upstream.

The VT_DISALLOCATE ioctl can free a virtual console while tty_release()
is still running, causing a use-after-free in con_shutdown().  This
occurs because VT_DISALLOCATE considers a virtual console's
'struct vc_data' to be unused as soon as the corresponding tty's
refcount hits 0.  But actually it may be still being closed.

Fix this by making vc_data be reference-counted via the embedded
'struct tty_port'.  A newly allocated virtual console has refcount 1.
Opening it for the first time increments the refcount to 2.  Closing it
for the last time decrements the refcount (in tty_operations::cleanup()
so that it happens late enough), as does VT_DISALLOCATE.

Reproducer:
#include <fcntl.h>
#include <linux/vt.h>
#include <sys/ioctl.h>
#include <unistd.h>

int main()
{
if (fork()) {
for (;;)
close(open("/dev/tty5", O_RDWR));
} else {
int fd = open("/dev/tty10", O_RDWR);

for (;;)
ioctl(fd, VT_DISALLOCATE, 5);
}
}

KASAN report:
BUG: KASAN: use-after-free in con_shutdown+0x76/0x80 drivers/tty/vt/vt.c:3278
Write of size 8 at addr ffff88806a4ec108 by task syz_vt/129

CPU: 0 PID: 129 Comm: syz_vt Not tainted 5.6.0-rc2 #11
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20191223_100556-anatol 04/01/2014
Call Trace:
 [...]
 con_shutdown+0x76/0x80 drivers/tty/vt/vt.c:3278
 release_tty+0xa8/0x410 drivers/tty/tty_io.c:1514
 tty_release_struct+0x34/0x50 drivers/tty/tty_io.c:1629
 tty_release+0x984/0xed0 drivers/tty/tty_io.c:1789
 [...]

Allocated by task 129:
 [...]
 kzalloc include/linux/slab.h:669 [inline]
 vc_allocate drivers/tty/vt/vt.c:1085 [inline]
 vc_allocate+0x1ac/0x680 drivers/tty/vt/vt.c:1066
 con_install+0x4d/0x3f0 drivers/tty/vt/vt.c:3229
 tty_driver_install_tty drivers/tty/tty_io.c:1228 [inline]
 tty_init_dev+0x94/0x350 drivers/tty/tty_io.c:1341
 tty_open_by_driver drivers/tty/tty_io.c:1987 [inline]
 tty_open+0x3ca/0xb30 drivers/tty/tty_io.c:2035
 [...]

Freed by task 130:
 [...]
 kfree+0xbf/0x1e0 mm/slab.c:3757
 vt_disallocate drivers/tty/vt/vt_ioctl.c:300 [inline]
 vt_ioctl+0x16dc/0x1e30 drivers/tty/vt/vt_ioctl.c:818
 tty_ioctl+0x9db/0x11b0 drivers/tty/tty_io.c:2660
 [...]

Fixes: 4001d7b7fc27 ("vt: push down the tty lock so we can see what is left to tackle")
Cc: <stable@vger.kernel.org> # v3.4+
Reported-by: syzbot+522643ab5729b0421998@syzkaller.appspotmail.com
Acked-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20200322034305.210082-2-ebiggers@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vt: vt_ioctl: remove unnecessary console allocation checks

commit 1aa6e058dd6cd04471b1f21298270014daf48ac9 upstream.

The vc_cons_allocated() checks in vt_ioctl() and vt_compat_ioctl() are
unnecessary because they can only be reached by calling ioctl() on an
open tty, which implies the corresponding virtual console is allocated.

And even if the virtual console *could* be freed concurrently, then
these checks would be broken since they aren't done under console_lock,
and the vc_data is dereferenced before them anyway.

So, remove these unneeded checks to avoid confusion.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20200224080326.295046-1-ebiggers@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vt: switch vt_dont_switch to bool

commit f400991bf872debffb01c46da882dc97d7e3248e upstream.

vt_dont_switch is pure boolean, no need for whole char.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20200219073951.16151-6-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vt: ioctl, switch VT_IS_IN_USE and VT_BUSY to inlines

commit e587e8f17433ddb26954f0edf5b2f95c42155ae9 upstream.

These two were macros. Switch them to static inlines, so that it's more
understandable what they are doing.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20200219073951.16151-2-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vt: selection, introduce vc_is_sel

commit dce05aa6eec977f1472abed95ccd71276b9a3864 upstream.

Avoid global variables (namely sel_cons) by introducing vc_is_sel. It
checks whether the parameter is the current selection console. This will
help putting sel_cons to a struct later.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20200219073951.16151-1-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: fix authentication with iwlwifi/mvm

commit be8c827f50a0bcd56361b31ada11dc0a3c2fd240 upstream.

The original patch didn't copy the ieee80211_is_data() condition
because on most drivers the management frames don't go through
this path. However, they do on iwlwifi/mvm, so we do need to keep
the condition here.

Cc: stable@vger.kernel.org
Fixes: ce2e1ca70307 ("mac80211: Check port authorization in the ieee80211_tx_dequeue() case")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Woody Suwalski <terraluna977@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: Check port authorization in the ieee80211_tx_dequeue() case

commit ce2e1ca703071723ca2dd94d492a5ab6d15050da upstream.

mac80211 used to check port authorization in the Data frame enqueue case
when going through start_xmit(). However, that authorization status may
change while the frame is waiting in a queue. Add a similar check in the
dequeue case to avoid sending previously accepted frames after
authorization change. This provides additional protection against
potential leaking of frames after a station has been disconnected and
the keys for it are being removed.

Cc: stable@vger.kernel.org
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Link: https://lore.kernel.org/r/20200326155133.ced84317ea29.I34d4c47cd8cc8a4042b38a76f16a601fbcbfd9b3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: xirlink_cit: add missing descriptor sanity checks

commit a246b4d547708f33ff4d4b9a7a5dbac741dc89d8 upstream.

Make sure to check that we have two alternate settings and at least one
endpoint before accessing the second altsetting structure and
dereferencing the endpoint arrays.

This specifically avoids dereferencing NULL-pointers or corrupting
memory when a device does not have the expected descriptors.

Note that the sanity check in cit_get_packet_size() is not redundant as
the driver is mixing looking up altsettings by index and by number,
which may not coincide.

Fixes: 659fefa0eb17 ("V4L/DVB: gspca_xirlink_cit: Add support for camera with a bcd version of 0.01")
Fixes: 59f8b0bf3c12 ("V4L/DVB: gspca_xirlink_cit: support bandwidth changing for devices with 1 alt setting")
Cc: stable <stable@vger.kernel.org> # 2.6.37
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: stv06xx: add missing descriptor sanity checks

commit 485b06aadb933190f4bc44e006076bc27a23f205 upstream.

Make sure to check that we have two alternate settings and at least one
endpoint before accessing the second altsetting structure and
dereferencing the endpoint arrays.

This specifically avoids dereferencing NULL-pointers or corrupting
memory when a device does not have the expected descriptors.

Note that the sanity checks in stv06xx_start() and pb0100_start() are
not redundant as the driver is mixing looking up altsettings by index
and by number, which may not coincide.

Fixes: 8668d504d72c ("V4L/DVB (12082): gspca_stv06xx: Add support for st6422 bridge and sensor")
Fixes: c0b33bdc5b8d ("[media] gspca-stv06xx: support bandwidth changing")
Cc: stable <stable@vger.kernel.org> # 2.6.31
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: dib0700: fix rc endpoint lookup

commit f52981019ad8d6718de79b425a574c6bddf81f7c upstream.

Make sure to use the current alternate setting when verifying the
interface descriptors to avoid submitting an URB to an invalid endpoint.

Failing to do so could cause the driver to misbehave or trigger a WARN()
in usb_submit_urb() that kernels with panic_on_warn set would choke on.

Fixes: c4018fa2e4c0 ("[media] dib0700: fix RC support on Hauppauge Nova-TD")
Cc: stable <stable@vger.kernel.org> # 3.16
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>