git.stricted.de - GitHub/moto-9609/android_kernel_motorola

drm/i915: cleanup_plane_fb: also drop reference to current state wait_req

There are two paths into intel_cleanup_plane_fb, the normal completion
path and the failure path.

In the failure case, intel_cleanup_plane_fb is called before
drm_atomic_helper_swap_state, so any wait_req reference made in
intel_prepare_plane_fb will be in old_intel_state->wait_req.

In the normal completion path, drm_atomic_helper_swap_state has
already been called, so the plane state holding the just-used wait_req
will not be in old_intel_state->wait_req, rather it will be in the
state associated with the plane itself.

Clearing this reference ensures that the wait_req will be freed as
soon as it the related mode setting operation is complete, rather than
waiting for some future mode setting operation to eventually
dereference it.

The existing dereference of old_intel_state->wait_req is still
required as that will hold the wait_req when the mode setting
operation fails.

cc: Daniel Vetter <daniel.vetter@intel.com>
cc: David Airlie <airlied@linux.ie>
cc: intel-gfx@lists.freedesktop.org
cc: dri-devel@lists.freedesktop.org
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Warn about aux msg buffer vs. size mismatch

If we have have a buffer, we should also have a size, and vice versa.
Let's check it both ways instead of just one.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469717704-13020-1-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Program FW_BLC_SELF on 915G as well

According to Bspec FW_BLC_SELF exists on 915G also. Let's program it.
The only open question is whether there's is a memory self-refresh
enable bit somewhere as well. For 945G/GM it's in FW_BLC_SELF, for
915GM it's in INSTPM. For 915G I can't find one in the docs. Let's drop
a FIXME about this, in case someone with the hardware is ever bored
enough to look for it.

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469804222-12650-2-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Always use cpp==4 for FW_BLC_SELF on 915GM/945GM

Bspec says:
"FW_BLC_SELF
...
Programming Note [DevALV] and [DevCST]: When calculating watermark
values for 15/16bpp, assume 32bpp for purposes of calculation using
the high priority bandwidth analysis spreadsheet."

Let's do that.

Perhaps this might even help with the problem that resulted in
commit 2ab1bc9df01d ("drm/i915: Disable self-refresh for untiled fbs on i915gm")

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469804222-12650-1-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Extract bdw_get_buf_trans_edp()

Make the BDW and SKL code a bit more similar by extracting the
low vswing handling for BDW into a helper, as we already have
it like that for SKL+.

Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1468328376-6380-10-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>

drm/i915: Simplify intel_ddi_get_encoder_port()

We no longer have any need to look up the intel_digital_port based
on the passed in intel_encoder, but we still want to look up the port.
Let's just move that logic into intel_ddi_get_encoder_port() and drop
the dig_port stuff.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1468328376-6380-9-git-send-email-ville.syrjala@linux.intel.com

drm/i915: Get the iboost setting based on the port type

Program the 'iboost_bit' based on what the VBT says it should be for
the specific port type, rather than assume it's always the same
for DP and HDMI.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1468328376-6380-8-git-send-email-ville.syrjala@linux.intel.com

drm/i915: Split DP/eDP/FDI and HDMI/DVI DDI buffer programming apart

DDI buffer prorgramming works quite differently depending on
the mode of the DDI port (DP/eDP/FDI vs. HDMI/DVI). Let's split
the function that does the programming into two matching variants
as well.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1468328376-6380-7-git-send-email-ville.syrjala@linux.intel.com

drm/i915: Explicitly use ddi buf trans entry 9 for hdmi

When the DDI port is in HDMI/DVI mode, it automagically uses the buffer
translations values from entry 9. Let's make that explicit in the code.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1468328376-6380-6-git-send-email-ville.syrjala@linux.intel.com

drm/i915: Move bxt_ddi_vswing_sequence() call into intel_ddi_pre_enable() for HDMI

Now that the SKL iboost programming is done from intel_ddi_pre_enable()
for HDMI, let's move the BXT bxt_ddi_vswing_sequence() call there as
well. This makes things look more similar to the DP/eDP case which
is handled in ddi_signal_levels().

Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1468328376-6380-5-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>

drm/i915: Program iboost settings for HDMI/DVI on SKL

Currently we fail to program the iboost stuff for HDMI/DVI. Let's remedy
that.

Cc: stable@vger.kernel.org
Fixes: f8896f5d58e6 ("drm/i915/skl: Buffer translation improvements")
Cc: David Weinehall <david.weinehall@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1468328376-6380-4-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>

drm/i915: Name the "iboost bit"

Give a proper name for the SKL DDI_BUF_TRANS iboost bit.

Cc: David Weinehall <david.weinehall@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1468328376-6380-3-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>

drm/i915: Fix iboost setting for DDI with 4 lanes on SKL

Bspec says:
"For DDIA with x4 capability (DDI_BUF_CTL DDIA Lane Capability Control =
DDIA x4), the I_boost value has to be programmed in both
tx_blnclegsctl_0 and tx_blnclegsctl_4."

Currently we only program tx_blnclegsctl_0. Let's do the other one as
well.

Cc: stable@vger.kernel.org
Fixes: f8896f5d58e6 ("drm/i915/skl: Buffer translation improvements")
Cc: David Weinehall <david.weinehall@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1468328376-6380-2-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>

drm/i915: remove redundant fbc warnings

The fbc enabled/active sanity checks are already done in
__intel_fbc_disable so no need to do them again.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1467710914-15146-1-git-send-email-matthew.auld@intel.com

drm/i915: Protect older gen against intel_gt_init_powersave()

In the middle of intel_gt_init_powersave() we have an if-chain that ends
with a universal else clause to read gen6+ registers. Older platforms
like Pineview that end up here do not like those registers and may even
OOPS whilst reading them!

Fixes: 3ea9a80132 ("drm/i915: Perform static RPS frequency setup ...")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470132927-1821-1-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915/debugfs: Take runtime_pm ref for sseu

When reading the SSEU statistics, we need to call
intel_runtime_pm_get() first, otherwise we might end up
triggering "Device suspended during HW access".

Signed-off-by: David Weinehall <david.weinehall@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470062007-26996-1-git-send-email-david.weinehall@linux.intel.com
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Add missing ring_mask to Pineview

It appears that we never told Pineview it has a RENDER_RING. This was
all fine until we started using the ring_mask for determining all the
available rings to initialise for legacy ringbuffer submission in commit
88d2ba2e95c8 ("drm/i915: Unify engine init loop"). Though really it is a
latent bug since the ring_mask inception in commit 73ae478cdf6a
("drm/i915: Replace has_bsd/blt/vebox with a mask").

To prevent similar mishaps in future, add a WARN_ON() if we find
ourselves with a device without any rings.

Fixes: 73ae478cdf6a ("drm/i915: Replace has_bsd/blt/vebox with a mask")
Fixes: 88d2ba2e95c8 ("drm/i915: Unify engine init loop")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ben Widawsky <ben@bwidawsk.net>
Link: http://patchwork.freedesktop.org/patch/msgid/1469749535-2382-1-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: drm-intel-fixes@lists.freedesktop.org

drm/i915: Fix up some stray to_i915(dev) after a recent merge

The merge conflict resolution caused some dev->dev_private to return
from the dead. Kill them with to_i915().

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1469644349-24571-1-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Never fully mask the the EI up rps interrupt on SNB/IVB

SNB (and IVB too I suppose) starts to misbehave if the GPU gets stuck
in an infinite batch buffer loop. The GPU apparently hogs something
critical and CPUs start to lose interrupts and whatnot. We can keep
the system limping along by unmasking some interrupts in
GEN6_PMINTRMSK. The EI up interrupt has been previously chosen for
that task, so let's never mask it.

v2: s/gen6_rps_pm_mask/gen6_sanitize_rps_pm_mask/ (Chris)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93122
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1464014568-4529-1-git-send-email-ville.syrjala@linux.intel.com
Cc: stable@vger.kernel.org

drm/i915: Update a couple of hangcheck comments to talk about engines

We still have lots of comments that refer to the old ring when we mean
struct intel_engine_cs and its hardware correspondence. This patch fixes
an instance inside hangcheck to talk about engines.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1469432687-22756-10-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469606850-28659-5-git-send-email-chris@chris-wilson.co.uk

drm/i915: Remove stray intel_engine_cs ring identifiers from i915_gem.c

A few places we use ring when referring to the struct intel_engine_cs. An
anachronism we are pruning out.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1469432687-22756-9-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469606850-28659-4-git-send-email-chris@chris-wilson.co.uk

drm/i915: Avoid using intel_engine_cs *ring for GPU error capture

Inside the error capture itself, we refer to not only the hardware
engine, its ringbuffer but also the capture state. Finding clear names
for each whilst avoiding mixing ring/intel_engine_cs is tricky. As a
compromise we keep using ering for the error capture.

v2: Use 'ee' locals for struct drm_i915_error_engine

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1469432687-22756-8-git-send-email-chris@chris-wilson.co.uk
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469606850-28659-3-git-send-email-chris@chris-wilson.co.uk

drm/i915: Use engine to refer to the user's BSD intel_engine_cs

This patch transitions the execbuf engine selection away from using the
ring nomenclature - though we still refer to the user's incoming
selector as their user_ring_id.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1469432687-22756-7-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469606850-28659-2-git-send-email-chris@chris-wilson.co.uk

drm/i915/cmdparser: Remove stray intel_engine_cs *ring

When we refer to intel_engine_cs, we want to use engine so as not to
confuse ourselves about ringbuffers.

v2: Rename all the functions as well, as well as a few more stray comments.
v3: Split the really long error message strings

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1469432687-22756-6-git-send-email-chris@chris-wilson.co.uk
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469606850-28659-1-git-send-email-chris@chris-wilson.co.uk

drm/i915: Wait up to 3ms for the pcu to ack the cdclk change request on SKL

Bspec tells us to keep bashing the PCU for up to 3ms when trying to
inform it about an upcoming change in the cdclk frequency. Currently
we only keep at it for 15*10usec (+ whatever delays gets added by
the sandybridge_pcode_read() itself). Let's change the limit to 3ms.

I decided to keep 10 usec delay per iteration for now, even though
the spec doesn't really tell us to do that.

Cc: stable@vger.kernel.org
Fixes: 5d96d8afcfbb ("drm/i915/skl: Deinit/init the display at suspend/resume")
Cc: David Weinehall <david.weinehall@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1468416723-23440-1-git-send-email-ville.syrjala@linux.intel.com
Tested-by: David Weinehall <david.weinehall@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Only drop the batch-pool's object reference

The obj->batch_pool_link is only inspected when traversing the batch
pool list and when on the batch pool list the object is referenced. Thus
when freeing the batch pool list, we only need to unreference the object
and do not have to worry about the obj->batch_pool_link.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1469432687-22756-5-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469530913-17180-4-git-send-email-chris@chris-wilson.co.uk

drm/i915: Only clear the client pointer when tearing down the file

Upon release of the file (i.e. the user calls close(fd)), we decouple
all objects from the client list so that we don't chase the dangling
file_priv. As we always inspect file_priv first, we only need to nullify
that pointer and can safely ignore the list_head.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1469432687-22756-4-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469530913-17180-3-git-send-email-chris@chris-wilson.co.uk

drm/i915: Prefer list_first_entry_or_null

list_first_entry_or_null() can generate better code than using
if (!list_empty()) {ptr = list_first_entry()) ..., so put it to use.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1469432687-22756-3-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469530913-17180-2-git-send-email-chris@chris-wilson.co.uk

drm/i915: Reduce breadcrumb lock coverage for intel_engine_enable_signaling()

Since intel_engine_enable_signaling() is now only called via
fence_enable_sw_signaling(), we can rely on it to provide serialisation
and run-once for us and so make ourselves slightly simpler.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1469432687-22756-2-git-send-email-chris@chris-wilson.co.uk
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469530913-17180-1-git-send-email-chris@chris-wilson.co.uk

drm/i915: Update DRIVER_DATE to 20160725

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Update the breadcrumb interrupt counter before enabling

In order to close a race with a long running hangcheck comparing a stale
interrupt counter with a just started waiter, we need to first bump the
counter as we start the fresh wait.

References: https://bugs.freedesktop.org/show_bug.cgi?id=96974
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469351421-13493-2-git-send-email-chris@chris-wilson.co.uk

drm/i915: Drop racy markup of missed-irqs from idle-worker

During the idle-worker we disable the hangcheck and so kick any waiters
that should have been completed (since the GPU is now idle). Unlike the
hangcheck, we do not take any care to avoid the race between the irq
handler and ourselves, and so it is possible for us to declare a missed
interrupt even as the bottom-half is being scheduled to run. Let's
ignore this race to stop a potential false-positive error.

References: https://bugs.freedesktop.org/show_bug.cgi?id=96974
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469351421-13493-1-git-send-email-chris@chris-wilson.co.uk

Revert "drm/i915: Enable RC6 immediately"

This reverts commit b12e0ee2080c ("drm/i915: Enable RC6 immediately"),
as it was never meant to be sent anywhere other than the bug report for
experimentation.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1469132179-4052-1-git-send-email-chris@chris-wilson.co.uk
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Remove misleading CSR firmware loading docs

I forgot to remove these when reworking the firmware loading sequence
last year. The new sequence is that we load firmware, and if it's not
there we entirely (and permanently) fail dmc setup.

Reported-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Dave Gordon <david.s.gordon@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1468505704-17391-1-git-send-email-daniel.vetter@ffwll.ch

drm/i915: use i915_gem_object_put_unlocked() after releasing mutex

The exit path in intel_overlay_put_image_ioctl() first unlocks the
struct_mutex, then drops its reference to 'new_bo' by calling
i915_gem_object_put(). As it isn't holding the mutex at this point,
this should be i915_gem_object_put_unlocked().

This was previously correct but got splatted in the recent
s/drm_gem_object_unreference/i915_gem_object_put/
where the _unlocked suffix was lost in this one case.

v2: don't bother fixing whitespace glitch [Chris Wilson]
Chris can do it next time he touches gem_evict.c ;)

Fixes: f8c417cd drm/i915: Rename drm_gem_object_unreference in preparation ...
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1469122778-14416-1-git-send-email-david.s.gordon@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Enable RC6 immediately

Now that PCU communication is reasonably fast, we do not need to defer
RC6 initialisation to a workqueue.

References: https://bugs.freedesktop.org/show_bug.cgi?id=97017
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915:gen9: restrict WaC6DisallowByGfxPause

WaC6DisallowByGfxPause is currently applied unconditionally
but is not required in all revisions.

v2: extend application of workaround to agree with w/a
database, which differs from the HSD.

References: HSD#2133391
Signed-off-by: Tim Gore <tim.gore@intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469008825-19442-1-git-send-email-tim.gore@intel.com

drm/i915: rename & update eb_select_ring()

'ring' is an old deprecated term for a GPU engine, so we're trying to
phase out all such terminology. eb_select_ring() not only has 'ring'
(meaning engine) in its name, but it has an ugly calling convention
whereby it returns an errno and stores a pointer-to-engine indirectly
through an output parameter. As there is only one error it ever returns
(-EINVAL), we can make it return the pointer directly, and have the
caller pass back the error code -EINVAL if the pointer result is NULL.

Thus we can replace
- ret = eb_select_ring(dev_priv, file, args, &engine);
- if (ret)
- return ret;
with
+ engine = eb_select_engine(dev_priv, file, args);
+ if (!engine)
+ return -EINVAL;
for increased clarity and maybe save a few cycles too.

Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469034967-15840-4-git-send-email-david.s.gordon@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: rename 'ring' where it refers to an engine or engine_id

'ring' is an old deprecated term for a GPU engine. Chris Wilson wants to
use the name for what is currently known as an intel_ringbuffer, but it
will be dreadfully confusing if some rings are ringbuffers but other
rings are still engines. So this patch changes the names of a bunch of
parameters called 'ring' to either 'engine' or 'engine_id' according to
what they actually are.

Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469034967-15840-3-git-send-email-david.s.gordon@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: rename macro parameter(ring) to (engine)

'ring' is an old deprecated term for a GPU engine. Here we make the
terminology more consistent by renaming the 'ring' parameter of lots of
macros that calculate addresses within the MMIO space of an engine.

Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469034967-15840-2-git-send-email-david.s.gordon@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/gen9: Add WaDisableGatherAtSetShaderCommonSlice

Add WaDisableGatherAtSetShaderCommonSlice for all gen9 as stated
by bspec. The bspec told to put this workaround to the per ctx bb.
Initial implementation and subsequent review were done based on
bspec. Arun raised a suspicion that this would belong to indirect bb
instead and he conducted more throughout investigation on the matter
and indeed the documentation was wrong.

v2: Move to indirect_ctx wa bb, as it is correct place (Arun)

References: HSD#2135817
Cc: Arun Siluvery <arun.siluvery@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com> (v1)
Reviewed-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469013973-24104-1-git-send-email-mika.kuoppala@intel.com

drm/i915/gen9: Add WaInPlaceDecompressionHang

Add this workaround to prevent hang when in place compression
is used.

References: HSD#2135774
Cc: stable@vger.kernel.org
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Convert i915_semaphores_is_enabled over to early sanitize

Rather than recomputing whether semaphores are enabled, we can do that
computation once during early initialisation as the i915.semaphores
module parameter is now read-only.

s/i915_semaphores_is_enabled/i915.semaphores/

v2: Add the state to the debug dmesg as well

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1469005202-9659-10-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469017917-15134-9-git-send-email-chris@chris-wilson.co.uk

drm/i915: Rename ring->virtual_start as ring->vaddr

Just a different colour to better match virtual addresses elsewhere.

s/ring->virtual_start/ring->vaddr/

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1469005202-9659-9-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469017917-15134-8-git-send-email-chris@chris-wilson.co.uk

drm/i915: Treat ringbuffer writes as write to normal memory

Ringbuffers are now being written to either through LLC or WC paths, so
treating them as simply iomem is no longer adequate. However, for the
older !llc hardware, the hardware is documentated as treating the TAIL
register update as serialising, so we can relax the barriers when filling
the rings (but even if it were not, it is still an uncached register write
and so serialising anyway.).

For simplicity, let's ignore the iomem annotation.

v2: Remove iomem from ringbuffer->virtual_address
v3: And for good measure add iomem elsewhere to keep sparse happy

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> #v2
Link: http://patchwork.freedesktop.org/patch/msgid/1469005202-9659-8-git-send-email-chris@chris-wilson.co.uk
Link: http://patchwork.freedesktop.org/patch/msgid/1469017917-15134-7-git-send-email-chris@chris-wilson.co.uk

drm/i915: Rename drm_gem_object_unreference_unlocked in preparation for lockless free

Whilst this ultimately wraps kref_put_mutex(), our goal here is the
lockless variant, so keep the _unlocked() suffix until we need it no
more.

s/drm_gem_object_unreference_unlocked/i915_gem_object_put_unlocked/

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1469005202-9659-7-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469017917-15134-6-git-send-email-chris@chris-wilson.co.uk

drm/i915: Rename drm_gem_object_unreference in preparation for lockless free

Ultimately wraps kref_put(), so adopt its nomenclature for consistency
with other subsystems.

s/drm_gem_object_unreference/i915_gem_object_put/

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1469005202-9659-6-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469017917-15134-5-git-send-email-chris@chris-wilson.co.uk

drm/i915: Wrap drm_gem_object_reference in i915_gem_object_get

Ultimately wraps kref_get(), so adopt its nomenclature for consistency
with other subsystems.

s/drm_gem_object_reference/i915_gem_object_get/

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1469005202-9659-5-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469017917-15134-4-git-send-email-chris@chris-wilson.co.uk

drm/i915: Wrap drm_gem_object_lookup in i915_gem_object_lookup

For symmetry with a forthcoming i915_gem_object_get() and
i915_gem_object_put().

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1469005202-9659-4-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Dave Gordon <david.s.gordon@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469017917-15134-3-git-send-email-chris@chris-wilson.co.uk

drm/i915: Rename i915_gem_context_reference/unreference()

As these are wrappers around kref_get/kref_put() it is preferable to
follow the naming convention and use the same verb get/put in our
wrapper names for manipulating a reference to the context.

s/i915_gem_context_reference/i915_gem_context_get/
s/i915_gem_context_unreference/i915_gem_context_put/

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469005202-9659-3-git-send-email-chris@chris-wilson.co.uk
Link: http://patchwork.freedesktop.org/patch/msgid/1469017917-15134-2-git-send-email-chris@chris-wilson.co.uk

drm/i915: Rename request reference/unreference to get/put

Now that we derive requests from struct fence, swap over to its
nomenclature for references. It's shorter and more idiomatic across the
kernel.

s/i915_gem_request_reference/i915_gem_request_get/
s/i915_gem_request_unreference/i915_gem_request_put/

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1469005202-9659-2-git-send-email-chris@chris-wilson.co.uk
Link: http://patchwork.freedesktop.org/patch/msgid/1469017917-15134-1-git-send-email-chris@chris-wilson.co.uk

drm/i915: Wait on external rendering for GEM objects

When transitioning to the GTT or CPU domain we wait on all rendering
from i915 to complete (with the optimisation of allowing concurrent read
access by both the GPU and client). We don't yet ensure all rendering
from third parties (tracked by implicit fences on the dma-buf) is
complete. Since implicitly tracked rendering by third parties will
ignore our cache-domain tracking, we have to always wait upon rendering
from third-parties when transitioning to direct access to the backing
store. We still rely on clients notifying us of cache domain changes
(i.e. they need to move to the GTT read or write domain after doing a CPU
access before letting the third party render again).

v2:
This introduces a potential WARN_ON into i915_gem_object_free() as the
current i915_vma_unbind() calls i915_gem_object_wait_rendering(). To
hit this path we first need to render with the GPU, have a dma-buf
attached with an unsignaled fence and then interrupt the wait. It does
get fixed later in the series (when i915_vma_unbind() only waits on the
active VMA and not all, including third-party, rendering.

To offset that risk, use the __i915_vma_unbind_no_wait hack.

Testcase: igt/prime_vgem/basic-fence-read
Testcase: igt/prime_vgem/basic-fence-mmap
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469002875-2335-8-git-send-email-chris@chris-wilson.co.uk

drm/i915: Mark imported dma-buf objects as being coherent

A foreign dma-buf does not share our cache domain tracking, and we rely
on the producer ensuring cache coherency. Marking them as being in the
CPU domain is incorrect.

v2: Add commentary about the GTT domain. This is not the best place for
it, but pending an actual overhaul of our domain tracking and explaining
each one, this comment should help the next reader...

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469002875-2335-7-git-send-email-chris@chris-wilson.co.uk

drm/i915: Disable waitboosting for mmioflips/semaphores

Since commit a6f766f39751 ("drm/i915: Limit ring synchronisation (sw
sempahores) RPS boosts") and commit bcafc4e38b6a ("drm/i915: Limit mmio
flip RPS boosts") we have limited the waitboosting for semaphores and
flips. Ideally we do not want to boost in either of these instances as no
userspace consumer is waiting upon the results (though a userspace producer
may be stalled trying to submit an execbuf - but in this case the
producer is being throttled due to the engine being saturated with
work). With the introduction of NO_WAITBOOST in the previous patch, we
can finally disable these needless boosts.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469002875-2335-6-git-send-email-chris@chris-wilson.co.uk

drm/i915: Disable waitboosting for fence_wait()

We want to restrict waitboosting to known process contexts, where we can
track which clients are receiving waitboosts and prevent excessive power
wasting. For fence_wait() we do not have any client tracking and so that
leaves it open to abuse.

v2: Hide the IS_ERR_OR_NULL testing for special clients

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469002875-2335-5-git-send-email-chris@chris-wilson.co.uk

drm/i915: Derive GEM requests from dma-fence

dma-buf provides a generic fence class for interoperation between
drivers. Internally we use the request structure as a fence, and so with
only a little bit of interfacing we can rebase those requests on top of
dma-buf fences. This will allow us, in the future, to pass those fences
back to userspace or between drivers.

v2: The fence_context needs to be globally unique, not just unique to
this device.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1469002875-2335-4-git-send-email-chris@chris-wilson.co.uk

drm/i915: Mark all current requests as complete before resetting them

Following a GPU reset upon hang, we retire all the requests and then
mark them all as complete. If we mark them as complete first, we both
keep the normal retirement order (completed first then retired) and
provide a small optimisation for concurrent lookups.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469002875-2335-3-git-send-email-chris@chris-wilson.co.uk

drm/i915: Retire oldest completed request before allocating next

In order to keep the memory allocated for requests reasonably tight, try
to reuse the oldest request (so long as it is completed and has no
external references) for the next allocation.

v2: Throw in a comment to hopefully make sure no one mistakes the
optimistic retirement of the oldest request for simply stealing it.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469002875-2335-2-git-send-email-chris@chris-wilson.co.uk

drm/i915: Move GEM request routines to i915_gem_request.c

Migrate the request operations out of the main body of i915_gem.c and
into their own C file for easier expansion.

v2: Move __i915_add_request() across as well

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469002875-2335-1-git-send-email-chris@chris-wilson.co.uk

drm/i915/guc: Revert "drm/i915/guc: enable GuC loading & submission by default"

This reverts commit 041824ee25cfc535ba2d9a22c217df735ea2471e.

We have latency issues that might impact the performance: #96606.
and hangs and loading issues on resume after S4: #96526.

This is also blocking a platform milestone so let's disable
this for now while we make sure we don't have any more loading
issue, or related basic hangs and it pass BAT for real in all
platofmrs.

In case BAT is wrong let's first fix BAT before re-enable it here.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96606
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96526
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Gordon <david.s.gordon@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Stable <stable@vger.kernel.org>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Christophe Prigent <christophe.prigent@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1468884477-30086-1-git-send-email-rodrigo.vivi@intel.com

drm/i915: Give proper names to MOCS entries

The purpose for each MOCS entry isn't well defined atm. Defining these
is important to remove any uncertainty about the use of these entries
for example in terms of performance and GPU/CPU coherency.

Suggested by Ville.

v4:
- Rename I915_MOCS_AUTO to I915_MOCS_PTE. (Chris)

CC: Rong R Yang <rong.r.yang@intel.com>
CC: Yakui Zhao <yakui.zhao@intel.com>
CC: Ville Syrjälä <ville.syrjala@linux.intel.com>
CC: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1467383528-16142-1-git-send-email-imre.deak@intel.com

drm/i915/bxt: Fix inadvertent CPU snooping due to incorrect MOCS config

Setting a write-back cache policy in the MOCS entry definition also
implies snooping, which has a considerable overhead. This is
unexpected for a few reasons:
- From user-space's point of view since it didn't want a coherent
  surface (it didn't set the buffer as such via the set caching IOCTL).
- There is a separate MOCS entry field for snooping (which we never
  set).
- This MOCS table is about caching in (e)LLC and there is no (e)LLC on
  BXT. There is a separate table for L3 cache control.

Considering the above the current behavior of snooping looks like an
unintentional side-effect of the WB setting. Changing it to be LLC-UC
gets rid of the snooping without any ill-effects. For a coherent
surface the application would use a separate MOCS entry at index 1 and
call the set caching IOCTL to setup the PTE entries for the
corresponding buffer to be snooped. In the future we could also add a
new MOCS entry for coherent surfaces.

This resulted in 70% improvement in synthetic texturing benchmarks.

Kudos to Valtteri Rantala, Eero Tamminen and Michael T Frederick and
Ville who helped to narrow the source of problem to the kernel and to
the snooping behaviour in particular.

With a follow-up change to adjust the 3rd entry value
igt/gem_mocs_settings is passing after this change.

v2:
- Rebase on v2 of patch 1/2.
v3:
- Set the entry as LLC uncached instead of PTE-passthrough. This way
  we also keep snooping disabled, but we also make the cacheability/
  coherency setting indepent of the PTE which is managed by the
  kernel. (Chris)

CC: Rong R Yang <rong.r.yang@intel.com>
CC: Yakui Zhao <yakui.zhao@intel.com>
CC: Valtteri Rantala <valtteri.rantala@intel.com>
CC: Eero Tamminen <eero.t.tamminen@intel.com>
CC: Michael T Frederick <michael.t.frederick@intel.com>
CC: Ville Syrjälä <ville.syrjala@linux.intel.com>
CC: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Acked-by: Zhao Yakui <yakui.zhao@intel.com>
Tested-by: Rong R Yang <rong.r.yang@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1467380406-11954-3-git-send-email-imre.deak@intel.com

drm/i915/gen9: Clean up MOCS table definitions

Use named struct initializers for clarity. Also fix the target cache
definition to reflect its role in GEN9 onwards. On GEN8 a TC value of 0
meant ELLC but on GEN9+ it means the TC and LRU controls are taken from
the PTE.

No functional change, igt/gem_mocs_settings still passing after this
change.

v2: (Chris)
- Add back the hexa literals for the entries.
Add note that igt/gem_mocs_settings still passes.

CC: Rong R Yang <rong.r.yang@intel.com>
CC: Yakui Zhao <yakui.zhao@intel.com>
CC: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Acked-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1467380406-11954-2-git-send-email-imre.deak@intel.com

drm/i915: Update missing kerneldoc

Not sure why so much slips through when 0day is catching these. Hopefully
the much faster sphinx toolchain helps in unlazying people.

Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1468612088-9721-10-git-send-email-daniel.vetter@ffwll.ch

drm/i915: Clean up kerneldoc for intel_lrc.c

Fairly minimal, there's still lots of functions without any docs, and
which aren't static. But probably we want to first clean this up some more.

- Drop the bogus const. Marking argument pointers themselves (instead of
what they point at) as const provides roughly 0 value. And it's confusing,
since the data the pointer points at _is_ being changed.

- Remove kerneldoc for static functions. Keep comments where they seem valuable.

- Indent and whitespace fixes.

- Blockquote the bit field definitions of the descriptor for correct layouting.

Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1468612088-9721-9-git-send-email-daniel.vetter@ffwll.ch

drm/i915: Fixup kerneldoc code snippets in intel_uncore.c

We need :: before, blank lines around and indentation with 4 _additional_
spaces to make it work. Also, don't use @param in code snippets, it results
in confusion.

Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1468612088-9721-8-git-send-email-daniel.vetter@ffwll.ch

drm/i915: Handle ENOSPC after failing to insert a mappable node

Even after adding individual page support for GTT mmaping, we can still
fail to find any space within the mappable region, and
drm_mm_insert_node() will then report ENOSPC. We have to then handle
this error by using the shmem access to the pages.

Fixes: b50a53715f09 ("drm/i915: Support for pread/pwrite ... objects")
Testcase: igt/gem_concurrent_blit
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ankitprasad Sharma <ankitprasad.r.sharma@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com
Link: http://patchwork.freedesktop.org/patch/msgid/1468690956-23480-1-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: refactor eb_get_batch()

Precursor for fix to secure batch execution. We will need to be able to
retrieve the batch VMA (as well as the batch itself) from the eb list,
so this patch extracts that part of eb_get_batch() into a separate
function, and moves both parts to a more logical place in the file, near
where the eb list is created.

Also, it may not be obvious, but the current execbuffer2 ioctl interface
requires that the buffer object containing the batch-to-be-executed be
the LAST entry in the exec2_list[] array (I expected it to be the
first!).

To clarify this, we can replace the rather obscure construct
"list_entry(eb->vmas.prev, ...)"
in the old version of eb_get_batch() with the equivalent but more
explicit
"list_last_entry(&eb->vmas,...)"
in the new eb_get_batch_vma() and of course add an explanatory comment.

Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1468504324-12690-2-git-send-email-david.s.gordon@intel.com

drm/i915: compile-time consistency check on __EXEC_OBJECT flags

Two different sets of flag bits are stored in the 'flags' member of a
'struct drm_i915_gem_exec_object2', and they're defined in two different
source files, increasing the risk of an accidental clash.

Some flags in this field are supplied by the user; these are defined in
i915_drm.h, and they start from the LSB and work up.

Other flags are defined in i915_gem_execbuffer, for internal use within
that file only; they start from the MSB and work down.

So here we add a compile-time check that the two sets of flags do not
overlap, which would cause all sorts of confusion.

Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1468504324-12690-1-git-send-email-david.s.gordon@intel.com

drm/i915: Set legacy properties when using legacy gamma set IOCTL. (v2)

The i915 driver is now using atomic properties and atomic commit
to handle the legacy set gamma IOCTL. However, if the driver is
configured without atomic (nuclear_pageflip = false), it won't
update the legacy properties for degamma_lut, gamma_lut and ctm
leaving them out of sync with the atomic version of the properties.

Until the driver is full atomic, make sure we update the non-atomic
version of the properties.

v2: Update the comment with a FIXME. (Daniel)

v3: Update arguments of the gamma_set vfunc (Lionel)

v4: Fixed vfunc prototype (Lionel)

igt-testcase: kms_pipe_color / legacy-gamma-reset-pipeX
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: stable@vger.kernel.org #v4.7
Signed-off-by: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1468591142-2253-1-git-send-email-lionel.g.landwerlin@intel.com

drm/i915: Treat eDP as always connected, again

eDP should be treated as connected even if doesn't have an EDID. In that
case we'll use the timings from the VBT. That used to be the case until
commit f21a21983ef1 ("drm/i915: Splitting intel_dp_detect")
broke things by considering even eDP disconnected if we fail to get
an EDID for it.

Fix things up again by treating eDP as always connected.

Cc: Shubhangi Shrivastava <shubhangi.shrivastava@intel.com>
Cc: Nathan D Ciobanu <nathan.d.ciobanu@intel.com>
Cc: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Cc: Larry Finger <larry.finger@lwfinger.net>
Reported-by: Larry Finger <larry.finger@lwfinger.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96675
Cc: drm-intel-fixes@lists.freedesktop.org
Fixes: f21a21983ef1 ("drm/i915: Splitting intel_dp_detect")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Larry Finger <larry.finger@lwfinger.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1468836914-16537-1-git-send-email-ville.syrjala@linux.intel.com

drm/i915: Flush logical context image out to memory upon suspend

Before suspend, and especially before building the hibernation image, we
need to context image to be coherent in memory. To do this we require
that we perform a context switch to a disposable context (i.e. the
dev_priv->kernel_context) - when that switch is complete, all other
context images will be complete. This leaves the kernel_context image as
incomplete, but fortunately that is disposable and we can do a quick
fixup of the logical state after resuming.

v2: Share the nearly identical code to switch to the kernel context with
eviction.
v3: Explain why we need the switch and reset.

Testcase: igt/gem_exec_suspend # bsw
References: https://bugs.freedesktop.org/show_bug.cgi?id=96526
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1468590980-6186-2-git-send-email-chris@chris-wilson.co.uk

drm/i915/evict: Always switch away from the current context

Currently execlists is exempt from emitting a request to switch each
ring away from the current context over to the dev_priv->kernel_context
(for whatever reason, just under execlists the GGTT is unlikely to be as
fragmented, however the switch may help in some extreme cases). Extract
the switcher and enable it for execlsts as well, as we need to do so in
a later patch to force the context switch before suspend. (And since for
that switch we explicitly require the disposable kernel context, rename
the extracted function.)

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1468590980-6186-1-git-send-email-chris@chris-wilson.co.uk

drm/i915/fbdev: Check for the framebuffer before use

If the fbdev probing fails, and in our error path we fail to clear the
dev_priv->fbdev, then we can try and use a dangling fbdev pointer, and
in particular a NULL fb. This could also happen in pathological cases
where we try to operate on the fbdev prior to it being probed.

Reported-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1468431285-28264-2-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>

drm/i915/fbdev: Drain the suspend worker on retiring

Since the suspend_work can arm itself if the console_lock() is currently
held elsewhere, simply calling flush_work() doesn't guarantee that the
work is idle upon return. To do so requires using cancel_work_sync().

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1468431285-28264-1-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>

drm/i915: add missing condition for committing planes on crtc

The i915 driver checks for color management properties changes as part
of a plane update. Therefore a color management update must imply a
plane update, otherwise we never update the transformation matrixes
and degamma/gamma LUTs.

v2: add comment about moving the commit of color management registers
to an async worker

v3: Commit color management register right after vblank

v4: Move back color management commit condition together with planes
commit

v5: Trigger color management commit through the planes commit (Daniel)

v6: Make plane change update more readable

Fixes: 20a34e78f0d7 (drm/i915: Update color management during vblank evasion.)
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: drm-intel-fixes@lists.freedesktop.org
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
References: https://lkml.org/lkml/2016/7/14/614
Reviewed-and-tested-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1464183041-8478-1-git-send-email-lionel.g.landwerlin@intel.com

drm/i915: Enable polling when we don't have hpd

Unfortunately, there's two situations where we lose hpd right now:
- Runtime suspend
- When we've shut off all of the power wells on Valleyview/Cherryview

While it would be nice if this didn't cause issues, this has the
ability to get us in some awkward states where a user won't be able to
get their display to turn on. For instance; if we boot a Valleyview
system without any monitors connected, it won't need any of it's power
wells and thus shut them off. Since this causes us to lose HPD, this
means that unless the user knows how to ssh into their machine and do a
manual reprobe for monitors, none of the monitors they connect after
booting will actually work.

Eventually we should come up with a better fix then having to enable
polling for this, since this makes rpm a lot less useful, but for now
the infrastructure in i915 just isn't there yet to get hpd in these
situations.

Changes since v1:
- Add comment explaining the addition of the if
   (!mode_config->poll_running) in intel_hpd_init()
- Remove unneeded if (!dev->mode_config.poll_enabled) in
   i915_hpd_poll_init_work()
- Call to drm_helper_hpd_irq_event() after we disable polling
- Add cancel_work_sync() call to intel_hpd_cancel_work()

Changes since v2:
- Apparently dev->mode_config.poll_running doesn't actually reflect
   whether or not a poll is currently in progress, and is actually used
   for dynamic module paramter enabling/disabling. So now we instead
   keep track of our own poll_running variable in dev_priv->hotplug
- Clean i915_hpd_poll_init_work() a little bit

Changes since v3:
- Remove the now-redundant connector loop in intel_hpd_init(), just
   rely on intel_hpd_poll_enable() for setting connector->polled
   correctly on each connector
- Get rid of poll_running
- Don't assign enabled in i915_hpd_poll_init_work before we actually
   lock dev->mode_config.mutex
- Wrap enabled assignment in i915_hpd_poll_init_work() in READ_ONCE()
   for doc purposes
- Do the same for dev_priv->hotplug.poll_enabled with WRITE_ONCE in
   intel_hpd_poll_enable()
- Add some comments about racing not mattering in intel_hpd_poll_enable

Changes since v4:
- Rename intel_hpd_poll_enable() to intel_hpd_poll_init()
- Drop the bool argument from intel_hpd_poll_init()
- Remove redundant calls to intel_hpd_poll_init()
- Rename poll_enable_work to poll_init_work
- Add some kerneldoc for intel_hpd_poll_init()
- Cross-reference intel_hpd_poll_init() in intel_hpd_init()
- Just copy the loop from intel_hpd_init() in intel_hpd_poll_init()

Changes since v5:
- Minor kerneldoc nitpicks

Cc: stable@vger.kernel.org
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude <cpaul@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915/vlv: Disable HPD in valleyview_crt_detect_hotplug()

One of the things preventing us from using polling is the fact that
calling valleyview_crt_detect_hotplug() when there's a VGA cable
connected results in sending another hotplug. With polling enabled when
HPD is disabled, this results in a scenario like this:

- We enable power wells and reset the ADPA
- output_poll_exec does force probe on VGA, triggering a hpd
- HPD handler waits for poll to unlock dev->mode_config.mutex
- output_poll_exec shuts off the ADPA, unlocks dev->mode_config.mutex
- HPD handler runs, resets ADPA and brings us back to the start

This results in an endless irq storm getting sent from the ADPA
whenever a VGA connector gets detected in the middle of polling.

Somewhat based off of the "drm/i915: Disable CRT HPD around force
trigger" patch Ville Syrjälä sent a while back

Cc: stable@vger.kernel.org
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Lyude <cpaul@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915/vlv: Reset the ADPA in vlv_display_power_well_init()

While VGA hotplugging worked(ish) before, it looks like that was mainly
because we'd unintentionally enable it in
valleyview_crt_detect_hotplug() when we did a force trigger. This
doesn't work reliably enough because whenever the display powerwell on
vlv gets disabled, the values set in VLV_ADPA get cleared and
consequently VGA hotplugging gets disabled. This causes bugs such as one
we found on an Intel NUC, where doing the following sequence of
hotplugs:

      - Disconnect all monitors
      - Connect VGA
      - Disconnect VGA
      - Connect HDMI

Would result in VGA hotplugging becoming disabled, due to the powerwells
getting toggled in the process of connecting HDMI.

Changes since v3:
- Expose intel_crt_reset() through intel_drv.h and call that in
   vlv_display_power_well_init() instead of
   encoder->base.funcs->reset(&encoder->base);

Changes since v2:
- Use intel_encoder structs instead of drm_encoder structs

Changes since v1:
- Instead of handling the register writes ourself, we just reuse
   intel_crt_detect()
- Instead of resetting the ADPA during display IRQ installation, we now
   reset them in vlv_display_power_well_init()

Cc: stable@vger.kernel.org
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude <cpaul@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Rebase over dev_priv/drm_device embedding.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915/vlv: Make intel_crt_reset() per-encoder

This lets call intel_crt_reset() in contexts where IRQs are disabled and
as such, can't hold the locks required to work with the connectors.

Cc: stable@vger.kernel.org
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude <cpaul@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Hide gen6_update_ring_freq()

This function is no longer used outside of intel_pm.c so we can stop
exposing it and rename the __gen6_update_ring_freq() to take its place.

Suggested-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1468397438-21226-8-git-send-email-chris@chris-wilson.co.uk

drm/i915: Defer enabling rc6 til after we submit the first batch/context

Some hardware requires a valid render context before it can initiate
rc6 power gating of the GPU; the default state of the GPU is not
sufficient and may lead to undefined behaviour. The first execution of
any batch will load the "golden render state", at which point it is safe
to enable rc6. As we do not forcibly load the kernel context at resume,
we have to hook into the batch submission to be sure that the render
state is setup before enabling rc6.

However, since we don't enable powersaving until that first batch, we
queued a delayed task in order to guarantee that the batch is indeed
submitted.

v2: Rearrange intel_disable_gt_powersave() to match.
v3: Apply user specified cur_freq (or idle_freq if not set).
v4: Give in, and supply a delayed work to autoenable rc6
v5: Mika suggested a couple of better names for delayed_resume_work
v6: Rebalance rpm_put around the autoenable task

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1468397438-21226-7-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>

drm/i915: Remove superfluous powersave work flushing

Instead of flushing the outstanding enabling, remember the requested
frequency to apply when the powersave work runs.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1468397438-21226-6-git-send-email-chris@chris-wilson.co.uk

drm/i915: Define a separate variable and control for RPS waitboost frequency

To allow the user finer control over waitboosting, allow them to set the
frequency we request for the boost. This also them allows to effectively
disable the boosting by setting the boost request to a low frequency.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1468397438-21226-5-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>

drm/i915: Move overclocking detection to alongside RPS frequency detection

Move the overclocking max frequency detection alongside the regular
frequency detection, before we expose the undefined value to userspace.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1468397438-21226-4-git-send-email-chris@chris-wilson.co.uk

drm/i915: Perform static RPS frequency setup before userspace

As these RPS frequency values are part of our userspace interface, they
must be established before that userspace interface is registered.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1468397438-21226-3-git-send-email-chris@chris-wilson.co.uk

drm/i915: Preserve current RPS frequency across init

Select idle frequency during initialisation, then reset the last known
frequency when re-enabling. This allows us to preserve the user selected
frequency across resets.

v2: Stop CHV from overriding the user's choice in cherryview_enable_rps()

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1468397438-21226-2-git-send-email-chris@chris-wilson.co.uk

drm/i915: Flush GT idle status upon reset

Upon resetting the GPU, we force the engines to be idle by clearing
their request lists. However, I neglected to clear the GT active status
and so the next request following the reset was not marking the device
as busy again. (We had to wait until any outstanding retire worker
finally ran and cleared the active status.)

Fixes: 67d97da34917 ("drm/i915: Only start retire worker when idle")
Testcase: igt/pm_rps/reset
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1468397438-21226-1-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: remove superfluous i915_gem_object_free_mmap_offset call

This should already be handled by drm_gem_object_release, which is
called later on.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1467720019-31876-1-git-send-email-matthew.auld@intel.com

drm/i915: Ignore panel type from OpRegion on SKL

Dell XPS 13 9350 apparently doesn't like it when we use the panel type
from OpRegion. The OpRegion panel type (0) tells us to use use low
vswing for eDP, whereas the VBT panel type (2) tells us to use normal
vswing. The problem is that low vswing results in some display flickers.
Since no one seems to know how this stuff is supposed to be handled,
let's just ignore the OpRegion panel type on SKL for now.

v2: Print the panel type correctly in the debug output

Reported-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: drm-intel-fixes@lists.freedesktop.org
References: https://lists.freedesktop.org/archives/intel-gfx/2016-June/098826.html
Fixes: a05628195a0d ("drm/i915: Get panel_type from OpRegion panel details")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1468324837-29237-1-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915: Pull out some more common engine init code

Created two common helpers for engine setup and engine init phases
respectively to help with code sharing.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1468422221-12132-1-git-send-email-tvrtko.ursulin@linux.intel.com
Reviewed-by: Chris Wilson <chris-wilson.co.uk>

drm/i915: Move common engine setup into intel_engine_cs.c

Common code deserves to be put in a separate file from legacy and
execlists implementation for clarity and ease of maintenance.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris-wilson.co.uk>

drm/i915: Simplify intel_init_ring_buffer prototype

Engine contains dev_priv so need to pass it in.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Chris Wilson <chris-wilson.co.uk>

drm/i915: Make more use of the shared engine irq setup

Use more of the shared engine setup data for legacy engine
initialization. This time to simplify the irq initialization
code.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris-wilson.co.uk>

drm/i915: Unify engine init loop

With the unified common engine setup done, and the execlist engine
initialization loop clearly split into two phases, we can eliminate
the separate legacy engine initialization code.

v2: Fix cleanup path for legacy.
v3: Rename constructors. (Chris Wilson)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Chris Wilson <chris-wilson.co.uk>

drm/i915: Prepare for engine init unification

Move the execlist engine setup to vfuncs so that the engine
init loop is clearly split into the mode agnostic and
specific steps.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Chris Wilson <chris-wilson.co.uk>

drm/i915: unify first-stage engine struct setup

intel_lrc.c has a table of "logical rings" (meaning engines), while
intel_ringbuffer.c has separately open-coded initialisation for each
engine. We can deduplicate this somewhat by using the same first-stage
engine-setup function for both modes.

So here we expose the function that transfers information from the
static table of (all) known engines to the dev_priv->engine array of
engines available on this device (adjusting the names along the way)
and then embed calls to it in both the LRC and the legacy-mode setup.

Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Chris Wilson <chris-wilson.co.uk>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Unbreak interrupts on pre-gen6

Prior to gen6 we didn't have per-ring IMR registers, which means that
since commit 61ff75ac20ff ("drm/i915: Simplify enabling
user-interrupts with L3-remapping") we're now masking off all interrupts
when init_render_ring() gets called. That's rather rude. Let's limit
the ring IMR frobbing to machines that actually have the per-ring IMR
registers.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 61ff75ac20ff ("drm/i915: Simplify enabling user-interrupts with L3-remapping")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1468340687-3596-1-git-send-email-ville.syrjala@linux.intel.com
Reviewd-by: Chris Wilson <chris@chris-wilson.co.uk>