ALSA: hda - Fix mic issues on Acer Aspire E1-472

commit 02322ac9dee9aff8d8862e8d6660ebe102f492ea upstream.

This patch applies the microphone-related fix created for the Acer
Aspire E1-572 to the E1-472 as well, as it uses the same Realtek ALC282
CODEC and demonstrates the same issues.

This patch allows an external, headset microphone to be used and limits
the gain on the (quite noisy) internal microphone.

Signed-off-by: Simon South <simon@simonsouth.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: ctl: Fix ioctls for X32 ABI

commit 6236d8bb2afcfe71b88ecea554e0dc638090a45f upstream.

The X32 ABI takes the same alignment like x86-64, and this may result
in the incompatible struct size from ia32.  Unfortunately, we hit this
in some control ABI: struct snd_ctl_elem_value differs between them
due to the position of 64bit variable array.  This ends up with the
unknown ioctl (ENOTTY) error.

The fix is to add the compat entries for the new aligned struct.

Reported-and-tested-by: Steven Newbury <steve@snewbury.org.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Add a quirk for Plantronics DA45

commit 17e2df4613be57d0fab68df749f6b8114e453152 upstream.

Plantronics DA45 does not support reading the sample rate which leads
to many lines of "cannot get freq at ep 0x4" and "cannot get freq at
ep 0x84". This patch adds the USB ID of the DA45 to quirks.c and
avoids those error messages.

Signed-off-by: Dennis Kadioglu <denk@post.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

adv7604: fix tx 5v detect regression

commit 0ba4581c84cfb39fd527f6b3457f1c97f6356c04 upstream.

The 5 volt detect functionality broke in 3.14: the code reads IO register 0x70
again after it has already been cleared. Instead it should use the cached
irq_reg_0x70 value and the io_write to 0x71 to clear 0x70 can be dropped since
this has already been done.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: pxa_dma: fix cyclic transfers

commit f16921275cc3c2442d0b95225785a601603b990f upstream.

While testing audio with pxa2xx-ac97, underrun were happening while the
user application was correctly feeding the music. Debug proved that the
cyclic transfer is not cyclic, ie. the last descriptor did not loop on
the first.

Another issue is that the descriptor length was always set to 8192,
because of an trivial operator issue.

This was tested on a pxa27x platform.

Fixes: a57e16cf0333 ("dmaengine: pxa: add pxa dmaengine driver")
Reported-by: Vasily Khoruzhick <anarsoul@gmail.com>
Tested-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix directory hardlinks from deleted directories

commit be629c62a603e5935f8177fd8a19e014100a259e upstream.

When a directory is deleted, we don't take too much care about killing off
all the dirents that belong to it — on the basis that on remount, the scan
will conclude that the directory is dead anyway.

This doesn't work though, when the deleted directory contained a child
directory which was moved *out*. In the early stages of the fs build
we can then end up with an apparent hard link, with the child directory
appearing both in its true location, and as a child of the original
directory which are this stage of the mount process we don't *yet* know
is defunct.

To resolve this, take out the early special-casing of the "directories
shall not have hard links" rule in jffs2_build_inode_pass1(), and let the
normal nlink processing happen for directories as well as other inodes.

Then later in the build process we can set ic->pino_nlink to the parent
inode#, as is required for directories during normal operaton, instead
of the nlink. And complain only *then* about hard links which are still
in evidence even after killing off all the unreachable paths.

Reported-by: Liu Song <liu.song11@zte.com.cn>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

jffs2: Fix page lock / f->sem deadlock

commit 49e91e7079febe59a20ca885a87dd1c54240d0f1 upstream.

With this fix, all code paths should now be obtaining the page lock before
f->sem.

Reported-by: Szabó Tamás <sztomi89@gmail.com>
Tested-by: Thomas Betker <thomas.betker@rohde-schwarz.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "jffs2: Fix lock acquisition order bug in jffs2_write_begin"

commit 157078f64b8a9cd7011b6b900b2f2498df850748 upstream.

This reverts commit 5ffd3412ae55
("jffs2: Fix lock acquisition order bug in jffs2_write_begin").

The commit modified jffs2_write_begin() to remove a deadlock with
jffs2_garbage_collect_live(), but this introduced new deadlocks found
by multiple users. page_lock() actually has to be called before
mutex_lock(&c->alloc_sem) or mutex_lock(&f->sem) because
jffs2_write_end() and jffs2_readpage() are called with the page locked,
and they acquire c->alloc_sem and f->sem, resp.

In other words, the lock order in jffs2_write_begin() was correct, and
it is the jffs2_garbage_collect_live() path that has to be changed.

Revert the commit to get rid of the new deadlocks, and to clear the way
for a better fix of the original deadlock.

Reported-by: Deng Chao <deng.chao1@zte.com.cn>
Reported-by: Ming Liu <liu.ming50@gmail.com>
Reported-by: wangzaiwei <wangzaiwei@top-vision.cn>
Signed-off-by: Thomas Betker <thomas.betker@rohde-schwarz.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: fix loading of orphan roots leading to BUG_ON

commit 909c3a22da3b8d2cfd3505ca5658f0176859d400 upstream.

When looking for orphan roots during mount we can end up hitting a
BUG_ON() (at root-item.c:btrfs_find_orphan_roots()) if a log tree is
replayed and qgroups are enabled. This is because after a log tree is
replayed, a transaction commit is made, which triggers qgroup extent
accounting which in turn does backref walking which ends up reading and
inserting all roots in the radix tree fs_info->fs_root_radix, including
orphan roots (deleted snapshots). So after the log tree is replayed, when
finding orphan roots we hit the BUG_ON with the following trace:

[118209.182438] ------------[ cut here ]------------
[118209.183279] kernel BUG at fs/btrfs/root-tree.c:314!
[118209.184074] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[118209.185123] Modules linked in: btrfs dm_flakey dm_mod crc32c_generic ppdev xor raid6_pq evdev sg parport_pc parport acpi_cpufreq tpm_tis tpm psmouse
processor i2c_piix4 serio_raw pcspkr i2c_core button loop autofs4 ext4 crc16 mbcache jbd2 sd_mod sr_mod cdrom ata_generic virtio_scsi ata_piix libata
virtio_pci virtio_ring virtio scsi_mod e1000 floppy [last unloaded: btrfs]
[118209.186318] CPU: 14 PID: 28428 Comm: mount Tainted: G        W       4.5.0-rc5-btrfs-next-24+ #1
[118209.186318] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014
[118209.186318] task: ffff8801ec131040 ti: ffff8800af34c000 task.ti: ffff8800af34c000
[118209.186318] RIP: 0010:[<ffffffffa04237d7>]  [<ffffffffa04237d7>] btrfs_find_orphan_roots+0x1fc/0x244 [btrfs]
[118209.186318] RSP: 0018:ffff8800af34faa8  EFLAGS: 00010246
[118209.186318] RAX: 00000000ffffffef RBX: 00000000ffffffef RCX: 0000000000000001
[118209.186318] RDX: 0000000080000000 RSI: 0000000000000001 RDI: 00000000ffffffff
[118209.186318] RBP: ffff8800af34fb08 R08: 0000000000000001 R09: 0000000000000000
[118209.186318] R10: ffff8800af34f9f0 R11: 6db6db6db6db6db7 R12: ffff880171b97000
[118209.186318] R13: ffff8801ca9d65e0 R14: ffff8800afa2e000 R15: 0000160000000000
[118209.186318] FS:  00007f5bcb914840(0000) GS:ffff88023edc0000(0000) knlGS:0000000000000000
[118209.186318] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[118209.186318] CR2: 00007f5bcaceb5d9 CR3: 00000000b49b5000 CR4: 00000000000006e0
[118209.186318] Stack:
[118209.186318]  fffffbffffffffff 010230ffffffffff 0101000000000000 ff84000000000000
[118209.186318]  fbffffffffffffff 30ffffffffffffff 0000000000000101 ffff880082348000
[118209.186318]  0000000000000000 ffff8800afa2e000 ffff8800afa2e000 0000000000000000
[118209.186318] Call Trace:
[118209.186318]  [<ffffffffa042e2db>] open_ctree+0x1e37/0x21b9 [btrfs]
[118209.186318]  [<ffffffffa040a753>] btrfs_mount+0x97e/0xaed [btrfs]
[118209.186318]  [<ffffffff8108e1c0>] ? trace_hardirqs_on+0xd/0xf
[118209.186318]  [<ffffffff8117b87e>] mount_fs+0x67/0x131
[118209.186318]  [<ffffffff81192d2b>] vfs_kern_mount+0x6c/0xde
[118209.186318]  [<ffffffffa0409f81>] btrfs_mount+0x1ac/0xaed [btrfs]
[118209.186318]  [<ffffffff8108e1c0>] ? trace_hardirqs_on+0xd/0xf
[118209.186318]  [<ffffffff8108c26b>] ? lockdep_init_map+0xb9/0x1b3
[118209.186318]  [<ffffffff8117b87e>] mount_fs+0x67/0x131
[118209.186318]  [<ffffffff81192d2b>] vfs_kern_mount+0x6c/0xde
[118209.186318]  [<ffffffff81195637>] do_mount+0x8a6/0x9e8
[118209.186318]  [<ffffffff8119598d>] SyS_mount+0x77/0x9f
[118209.186318]  [<ffffffff81493017>] entry_SYSCALL_64_fastpath+0x12/0x6b
[118209.186318] Code: 64 00 00 85 c0 89 c3 75 24 f0 41 80 4c 24 20 20 49 8b bc 24 f0 01 00 00 4c 89 e6 e8 e8 65 00 00 85 c0 89 c3 74 11 83 f8 ef 75 02 <0f> 0b
4c 89 e7 e8 da 72 00 00 eb 1c 41 83 bc 24 00 01 00 00 00
[118209.186318] RIP  [<ffffffffa04237d7>] btrfs_find_orphan_roots+0x1fc/0x244 [btrfs]
[118209.186318]  RSP <ffff8800af34faa8>
[118209.230735] ---[ end trace 83938f987d85d477 ]---

So fix this by not treating the error -EEXIST, returned when attempting
to insert a root already inserted by the backref walking code, as an error.

The following test case for xfstests reproduces the bug:

  seq=`basename $0`
  seqres=$RESULT_DIR/$seq
  echo "QA output created by $seq"
  tmp=/tmp/$$
  status=1 # failure is the default!
  trap "_cleanup; exit \$status" 0 1 2 3 15

  _cleanup()
  {
      _cleanup_flakey
      cd /
      rm -f $tmp.*
  }

  # get standard environment, filters and checks
  . ./common/rc
  . ./common/filter
  . ./common/dmflakey

  # real QA test starts here
  _supported_fs btrfs
  _supported_os Linux
  _require_scratch
  _require_dm_target flakey
  _require_metadata_journaling $SCRATCH_DEV

  rm -f $seqres.full

  _scratch_mkfs >>$seqres.full 2>&1
  _init_flakey
  _mount_flakey

  _run_btrfs_util_prog quota enable $SCRATCH_MNT

  # Create 2 directories with one file in one of them.
  # We use these just to trigger a transaction commit later, moving the file from
  # directory a to directory b and doing an fsync against directory a.
  mkdir $SCRATCH_MNT/a
  mkdir $SCRATCH_MNT/b
  touch $SCRATCH_MNT/a/f
  sync

  # Create our test file with 2 4K extents.
  $XFS_IO_PROG -f -s -c "pwrite -S 0xaa 0 8K" $SCRATCH_MNT/foobar | _filter_xfs_io

  # Create a snapshot and delete it. This doesn't really delete the snapshot
  # immediately, just makes it inaccessible and invisible to user space, the
  # snapshot is deleted later by a dedicated kernel thread (cleaner kthread)
  # which is woke up at the next transaction commit.
  # A root orphan item is inserted into the tree of tree roots, so that if a
  # power failure happens before the dedicated kernel thread does the snapshot
  # deletion, the next time the filesystem is mounted it resumes the snapshot
  # deletion.
  _run_btrfs_util_prog subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap
  _run_btrfs_util_prog subvolume delete $SCRATCH_MNT/snap

  # Now overwrite half of the extents we wrote before. Because we made a snapshpot
  # before, which isn't really deleted yet (since no transaction commit happened
  # after we did the snapshot delete request), the non overwritten extents get
  # referenced twice, once by the default subvolume and once by the snapshot.
  $XFS_IO_PROG -c "pwrite -S 0xbb 4K 8K" $SCRATCH_MNT/foobar | _filter_xfs_io

  # Now move file f from directory a to directory b and fsync directory a.
  # The fsync on the directory a triggers a transaction commit (because a file
  # was moved from it to another directory) and the file fsync leaves a log tree
  # with file extent items to replay.
  mv $SCRATCH_MNT/a/f $SCRATCH_MNT/a/b
  $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/a
  $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foobar

  echo "File digest before power failure:"
  md5sum $SCRATCH_MNT/foobar | _filter_scratch

  # Now simulate a power failure and mount the filesystem to replay the log tree.
  # After the log tree was replayed, we used to hit a BUG_ON() when processing
  # the root orphan item for the deleted snapshot. This is because when processing
  # an orphan root the code expected to be the first code inserting the root into
  # the fs_info->fs_root_radix radix tree, while in reallity it was the second
  # caller attempting to do it - the first caller was the transaction commit that
  # took place after replaying the log tree, when updating the qgroup counters.
  _flakey_drop_and_remount

  echo "File digest before after failure:"
  # Must match what he got before the power failure.
  md5sum $SCRATCH_MNT/foobar | _filter_scratch

  _unmount_flakey
  status=0
  exit

Fixes: 2d9e97761087 ("Btrfs: use btrfs_get_fs_root in resolve_indirect_ref")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pata-rb532-cf: get rid of the irq_to_gpio() call

commit 018361767a21fb2d5ebd3ac182c04baf8a8b4e08 upstream.

The RB532 platform specific irq_to_gpio() implementation has been
removed with commit 832f5dacfa0b ("MIPS: Remove all the uses of
custom gpio.h"). Now the platform uses the generic stub which causes
the following error:

  pata-rb532-cf pata-rb532-cf: no GPIO found for irq149
  pata-rb532-cf: probe of pata-rb532-cf failed with error -2

Drop the irq_to_gpio() call and get the GPIO number from platform
data instead. After this change, the driver works again:

  scsi host0: pata-rb532-cf
  ata1: PATA max PIO4 irq 149
  ata1.00: CFA: CF 1GB, 20080820, max MWDMA4
  ata1.00: 1989792 sectors, multi 0: LBA
  ata1.00: configured for PIO4
  scsi 0:0:0:0: Direct-Access     ATA      CF 1GB           0820 PQ: 0\
  ANSI: 5
  sd 0:0:0:0: [sda] 1989792 512-byte logical blocks: (1.01 GB/971 MiB)
  sd 0:0:0:0: [sda] Write Protect is off
  sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't\
  support DPO or FUA
   sda: sda1 sda2
  sd 0:0:0:0: [sda] Attached SCSI disk

Fixes: 832f5dacfa0b ("MIPS: Remove all the uses of custom gpio.h")
Cc: Alban Bedel <albeu@free.fr>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Do not have 'comm' filter override event 'comm' field

commit e57cbaf0eb006eaa207395f3bfd7ce52c1b5539c upstream.

Commit 9f61668073a8d "tracing: Allow triggers to filter for CPU ids and
process names" added a 'comm' filter that will filter events based on the
current tasks struct 'comm'. But this now hides the ability to filter events
that have a 'comm' field too. For example, sched_migrate_task trace event.
That has a 'comm' field of the task to be migrated.

 echo 'comm == "bash"' > events/sched_migrate_task/filter

will now filter all sched_migrate_task events for tasks named "bash" that
migrates other tasks (in interrupt context), instead of seeing when "bash"
itself gets migrated.

This fix requires a couple of changes.

1) Change the look up order for filter predicates to look at the events
   fields before looking at the generic filters.

2) Instead of basing the filter function off of the "comm" name, have the
   generic "comm" filter have its own filter_type (FILTER_COMM). Test
   against the type instead of the name to assign the filter function.

3) Add a new "COMM" filter that works just like "comm" but will filter based
   on the current task, even if the trace event contains a "comm" field.

Do the same for "cpu" field, adding a FILTER_CPU and a filter "CPU".

Fixes: 9f61668073a8d "tracing: Allow triggers to filter for CPU ids and process names"
Reported-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ata: ahci: don't mark HotPlugCapable Ports as external/removable

commit dc8b4afc4a04fac8ee55a19b59f2356a25e7e778 upstream.

The HPCP bit is set by bioses for on-board sata ports either because
they think sata is hotplug capable in general or to allow Windows
to display a "device eject" icon on ports which are routed to an
external connector bracket.

However in Redhat Bugzilla #1310682, users report that with kernel 4.4,
where this bit test first appeared, a lot of partitions on sata drives
are now mounted automatically.

This patch should fix redhat and a lot of other distros which
unconditionally automount all devices which have the "removable"
bit set.

Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 8a3e33cf92c7 ("ata: ahci: find eSATA ports and flag them as removable" changes userspace behavior)
Link: http://lkml.kernel.org/g/56CF35FA.1070500@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PM / sleep / x86: Fix crash on graph trace through x86 suspend

commit 92f9e179a702a6adbc11e2fedc76ecd6ffc9e3f7 upstream.

Pause/unpause graph tracing around do_suspend_lowlevel as it has
inconsistent call/return info after it jumps to the wakeup vector.
The graph trace buffer will otherwise become misaligned and
may eventually crash and hang on suspend.

To reproduce the issue and test the fix:
Run a function_graph trace over suspend/resume and set the graph
function to suspend_devices_and_enter. This consistently hangs the
system without this fix.

Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: vmemmap: use virtual projection of linear region

commit dfd55ad85e4a7fbaa82df12467515ac3c81e8a3e upstream.

Commit dd006da21646 ("arm64: mm: increase VA range of identity map") made
some changes to the memory mapping code to allow physical memory to reside
at an offset that exceeds the size of the virtual mapping.

However, since the size of the vmemmap area is proportional to the size of
the VA area, but it is populated relative to the physical space, we may
end up with the struct page array being mapped outside of the vmemmap
region. For instance, on my Seattle A0 box, I can see the following output
in the dmesg log.

   vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (     8 GB maximum)
             0xffffffbfc0000000 - 0xffffffbfd0000000   (   256 MB actual)

We can fix this by deciding that the vmemmap region is not a projection of
the physical space, but of the virtual space above PAGE_OFFSET, i.e., the
linear region. This way, we are guaranteed that the vmemmap region is of
sufficient size, and we can even reduce the size by half.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Adding Intel Lewisburg device IDs for SATA

commit f5bdd66c705484b4bc77eb914be15c1b7881fae7 upstream.

This patch complements the list of device IDs previously
added for lewisburg sata.

Signed-off-by: Alexandra Yates <alexandra.yates@linux.intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

writeback: flush inode cgroup wb switches instead of pinning super_block

commit a1a0e23e49037c23ea84bc8cc146a03584d13577 upstream.

If cgroup writeback is in use, inodes can be scheduled for
asynchronous wb switching.  Before 5ff8eaac1636 ("writeback: keep
superblock pinned during cgroup writeback association switches"), this
could race with umount leading to super_block being destroyed while
inodes are pinned for wb switching.  5ff8eaac1636 fixed it by bumping
s_active while wb switches are in flight; however, this allowed
in-flight wb switches to make umounts asynchronous when the userland
expected synchronosity - e.g. fsck immediately following umount may
fail because the device is still busy.

This patch removes the problematic super_block pinning and instead
makes generic_shutdown_super() flush in-flight wb switches.  wb
switches are now executed on a dedicated isw_wq so that they can be
flushed and isw_nr_in_flight keeps track of the number of in-flight wb
switches so that flushing can be avoided in most cases.

v2: Move cgroup_writeback_umount() further below and add MS_ACTIVE
    check in inode_switch_wbs() as Jan an Al suggested.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Tahsin Erdogan <tahsin@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Link: http://lkml.kernel.org/g/CAAeU0aNCq7LGODvVGRU-oU_o-6enii5ey0p1c26D1ZzYwkDc5A@mail.gmail.com
Fixes: 5ff8eaac1636 ("writeback: keep superblock pinned during cgroup writeback association switches")
Reviewed-by: Jan Kara <jack@suse.cz>
Tested-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: bio: introduce helpers to get the 1st and last bvec

commit 7bcd79ac50d9d83350a835bdb91c04ac9e098412 upstream.

The bio passed to bio_will_gap() may be fast cloned from upper
layer(dm, md, bcache, fs, ...), or from bio splitting in block
core.

Unfortunately bio_will_gap() just figures out the last bvec via
'bi_io_vec[prev->bi_vcnt - 1]' directly, and this way is obviously
wrong.

This patch introduces two helpers for getting the first and last
bvec of one bio for fixing the issue.

Reported-by: Sagi Grimberg <sagig@dev.mellanox.co.il>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libata: Align ata_device's id on a cacheline

commit 4ee34ea3a12396f35b26d90a094c75db95080baa upstream.

The id buffer in ata_device is a DMA target, but it isn't explicitly
cacheline aligned. Due to this, adjacent fields can be overwritten with
stale data from memory on non coherent architectures. As a result, the
kernel is sometimes unable to communicate with an ATA device.

Fix this by ensuring that the id buffer is cacheline aligned.

This issue is similar to that fixed by Commit 84bda12af31f
("libata: align ap->sector_buf").

Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libata: fix HDIO_GET_32BIT ioctl

commit 287e6611ab1eac76c2c5ebf6e345e04c80ca9c61 upstream.

As reported by Soohoon Lee, the HDIO_GET_32BIT ioctl does not
work correctly in compat mode with libata.

I have investigated the issue further and found multiple problems
that all appeared with the same commit that originally introduced
HDIO_GET_32BIT handling in libata back in linux-2.6.8 and presumably
also linux-2.4, as the code uses "copy_to_user(arg, &val, 1)" to copy
a 'long' variable containing either 0 or 1 to user space.

The problems with this are:

* On big-endian machines, this will always write a zero because it
  stores the wrong byte into user space.

* In compat mode, the upper three bytes of the variable are updated
  by the compat_hdio_ioctl() function, but they now contain
  uninitialized stack data.

* The hdparm tool calling this ioctl uses a 'static long' variable
  to store the result. This means at least the upper bytes are
  initialized to zero, but calling another ioctl like HDIO_GET_MULTCOUNT
  would fill them with data that remains stale when the low byte
  is overwritten. Fortunately libata doesn't implement any of the
  affected ioctl commands, so this would only happen when we query
  both an IDE and an ATA device in the same command such as
  "hdparm -N -c /dev/hda /dev/sda"

* The libata code for unknown reasons started using ATA_IOC_GET_IO32
  and ATA_IOC_SET_IO32 as aliases for HDIO_GET_32BIT and HDIO_SET_32BIT,
  while the ioctl commands that were added later use the normal
  HDIO_* names. This is harmless but rather confusing.

This addresses all four issues by changing the code to use put_user()
on an 'unsigned long' variable in HDIO_GET_32BIT, like the IDE subsystem
does, and by clarifying the names of the ioctl commands.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Soohoon Lee <Soohoon.Lee@f5.com>
Tested-by: Soohoon Lee <Soohoon.Lee@f5.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: return from atombios_dp_get_dpcd only when error

commit 0b39c531cfa12dad54eac238c2e303b994df1ef7 upstream.

In amdgpu_connector_hotplug(), we need to start DP link
training only after we have received DPCD. The function
amdgpu_atombios_dp_get_dpcd() returns non-zero value only
when an error condition is met, otherwise returns zero.
So in case the function encounters an error, we need to
skip rest of the code and return from amdgpu_connector_hotplug()
immediately. Only when we are successfull in reading DPCD
pin, we should carry on with turning-on the monitor.

Signed-off-by: Arindam Nath <arindam.nath@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu/gfx8: specify which engine to wait before vm flush

commit 9cac537332f5502c103415b25609548c276a09f8 upstream.

Select between me and pfp properly.

Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: apply gfx_v8 fixes to gfx_v7 as well

commit feebe91aa9a9d99d9ec157612a614fadb79beb99 upstream.

We never ported that back to CIK, so we could run into VM faults here.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu/pm: update current crtc info after setting the powerstate

commit eda1d1cf8d18383f19cd2b752f786120efa4768f upstream.

On CI, we need to see if the number of crtcs changes to determine
whether or not we need to upload the mclk table again.  In practice
we don't currently upload the mclk table again after the initial load.
The only reason you would would be to add new states, e.g., for
arbitrary mclk setting which is not currently supported.

Acked-by: Jordan Lazare <Jordan.Lazare@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon/pm: update current crtc info after setting the powerstate

commit 5e031d9fe8b0741f11d49667dfc3ebf5454121fd upstream.

On CI, we need to see if the number of crtcs changes to determine
whether or not we need to upload the mclk table again.  In practice
we don't currently upload the mclk table again after the initial load.
The only reason you would would be to add new states, e.g., for
arbitrary mclk setting which is not currently supported.

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/ast: Fix incorrect register check for DRAM width

commit 2d02b8bdba322b527c5f5168ce1ca10c2d982a78 upstream.

During DRAM initialization on certain ASpeed devices, an incorrect
bit (bit 10) was checked in the "SDRAM Bus Width Status" register
to determine DRAM width.

Query bit 6 instead in accordance with the Aspeed AST2050 datasheet v1.05.

Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

target: Fix WRITE_SAME/DISCARD conversion to linux 512b sectors

commit 8a9ebe717a133ba7bc90b06047f43cc6b8bcb8b3 upstream.

In a couple places we are not converting to/from the Linux
block layer 512 bytes sectors.

1.

The request queue values and what we do are a mismatch of
things:

max_discard_sectors - This is in linux block layer 512 byte
sectors. We are just copying this to max_unmap_lba_count.

discard_granularity - This is in bytes. We are converting it
to Linux block layer 512 byte sectors.

discard_alignment - This is in bytes. We are just copying
this over.

The problem is that the core LIO code exports these values in
spc_emulate_evpd_b0 and we use them to test request arguments
in sbc_execute_unmap, but we never convert to the block size
we export to the initiator. If we are not using 512 byte sectors
then we are exporting the wrong values or are checks are off.
And, for the discard_alignment/bytes case we are just plain messed
up.

2.

blkdev_issue_discard's start and number of sector arguments
are supposed to be in linux block layer 512 byte sectors. We are
currently passing in the values we get from the initiator which
might be based on some other sector size.

There is a similar problem in iblock_execute_write_same where
the bio functions want values in 512 byte sectors but we are
passing in what we got from the initiator.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
[ kamal: backport to 4.4-stable: no unmap_zeroes_data ]
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/vt-d: Use BUS_NOTIFY_REMOVED_DEVICE in hotplug path

commit e6a8c9b337eed56eb481e1b4dd2180c25a1e5310 upstream.

In the PCI hotplug path of the Intel IOMMU driver, replace
the usage of the BUS_NOTIFY_DEL_DEVICE notifier, which is
executed before the driver is unbound from the device, with
BUS_NOTIFY_REMOVED_DEVICE, which runs after that.

This fixes a kernel BUG being triggered in the VT-d code
when the device driver tries to unmap DMA buffers and the
VT-d driver already destroyed all mappings.

Reported-by: Stefani Seibold <stefani@seibold.net>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/amd: Fix boot warning when device 00:00.0 is not iommu covered

commit 38e45d02ea9f194b89d6bf41e52ccafc8e2c2b47 upstream.

The setup code for the performance counters in the AMD IOMMU driver
tests whether the counters can be written. It tests to setup a counter
for device 00:00.0, which fails on systems where this particular device
is not covered by the IOMMU.

Fix this by not relying on device 00:00.0 but only on the IOMMU being
present.

Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/amd: Apply workaround for ATS write permission check

commit 358875fd52ab8f00f66328cbf1a1d2486f265829 upstream.

The AMD Family 15h Models 30h-3Fh (Kaveri) BIOS and Kernel Developer's
Guide omitted part of the BIOS IOMMU L2 register setup specification.
Without this setup the IOMMU L2 does not fully respect write permissions
when handling an ATS translation request.

The IOMMU L2 will set PTE dirty bit when handling an ATS translation with
write permission request, even when PTE RW bit is clear. This may occur by
direct translation (which would cause a PPR) or by prefetch request from
the ATC.

This is observed in practice when the IOMMU L2 modifies a PTE which maps a
pagecache page. The ext4 filesystem driver BUGs when asked to writeback
these (non-modified) pages.

Enable ATS write permission check in the Kaveri IOMMU L2 if BIOS has not.

Signed-off-by: Jay Cornwall <jay@jcornwall.me>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm/arm64: KVM: Fix ioctl error handling

commit 4cad67fca3fc952d6f2ed9e799621f07666a560f upstream.

Calling return copy_to_user(...) in an ioctl will not
do the right thing if there's a pagefault:
copy_to_user returns the number of bytes not copied
in this case.

Fix up kvm to do
return copy_to_user(...)) ?  -EFAULT : 0;

everywhere.

Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: fix root cause for missed hardware breakpoints

commit 70e4da7a8ff62f2775337b705f45c804bb450454 upstream.

Commit 172b2386ed16 ("KVM: x86: fix missed hardware breakpoints",
2016-02-10) worked around a case where the debug registers are not loaded
correctly on preemption and on the first entry to KVM_RUN.

However, Xiao Guangrong pointed out that the root cause must be that
KVM_DEBUGREG_BP_ENABLED is not being set correctly.  This can indeed
happen due to the lazy debug exit mechanism, which does not call
kvm_update_dr7.  Fix it by replacing the existing loop (more or less
equivalent to kvm_update_dr0123) with calls to all the kvm_update_dr*
functions.

Fixes: 172b2386ed16a9143d9a456aae5ec87275c61489
Reviewed-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vfio: fix ioctl error handling

commit 8160c4e455820d5008a1116d2dca35f0363bb062 upstream.

Calling return copy_to_user(...) in an ioctl will not
do the right thing if there's a pagefault:
copy_to_user returns the number of bytes not copied
in this case.

Fix up vfio to do
return copy_to_user(...)) ?
-EFAULT : 0;

everywhere.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix cifs_uniqueid_to_ino_t() function for s390x

commit 1ee9f4bd1a97026a7b2d7ae9f1f74b45680d0003 upstream.

This issue is caused by commit 02323db17e3a7 ("cifs: fix
cifs_uniqueid_to_ino_t not to ever return 0"), when BITS_PER_LONG
is 64 on s390x, the corresponding cifs_uniqueid_to_ino_t()
function will cast 64-bit fileid to 32-bit by using (ino_t)fileid,
because ino_t (typdefed __kernel_ino_t) is int type.

It's defined in arch/s390/include/uapi/asm/posix_types.h

    #ifndef __s390x__

    typedef unsigned long   __kernel_ino_t;
    ...
    #else /* __s390x__ */

    typedef unsigned int    __kernel_ino_t;

So the #ifdef condition is wrong for s390x, we can just still use
one cifs_uniqueid_to_ino_t() function with comparing sizeof(ino_t)
and sizeof(u64) to choose the correct execution accordingly.

Signed-off-by: Yadan Fan <ydfan@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

CIFS: Fix SMB2+ interim response processing for read requests

commit 6cc3b24235929b54acd5ecc987ef11a425bd209e upstream.

For interim responses we only need to parse a header and update
a number credits. Now it is done for all SMB2+ command except
SMB2_READ which is wrong. Fix this by adding such processing.

Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Tested-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: fix out-of-bounds access in lease parsing

commit deb7deff2f00bdbbcb3d560dad2a89ef37df837d upstream.

When opening a file, SMB2_open() attempts to parse the lease state from the
SMB2 CREATE Response.  However, the parsing code was not careful to ensure
that the create contexts are not empty or invalid, which can lead to out-
of-bounds memory access.  This can be seen easily by trying
to read a file from a OSX 10.11 SMB3 server.  Here is sample crash output:

BUG: unable to handle kernel paging request at ffff8800a1a77cc6
IP: [<ffffffff8828a734>] SMB2_open+0x804/0x960
PGD 8f77067 PUD 0
Oops: 0000 [#1] SMP
Modules linked in:
CPU: 3 PID: 2876 Comm: cp Not tainted 4.5.0-rc3.x86_64.1+ #14
Hardware name: NETGEAR ReadyNAS 314          /ReadyNAS 314          , BIOS 4.6.5 10/11/2012
task: ffff880073cdc080 ti: ffff88005b31c000 task.ti: ffff88005b31c000
RIP: 0010:[<ffffffff8828a734>]  [<ffffffff8828a734>] SMB2_open+0x804/0x960
RSP: 0018:ffff88005b31fa08  EFLAGS: 00010282
RAX: 0000000000000015 RBX: 0000000000000000 RCX: 0000000000000006
RDX: 0000000000000000 RSI: 0000000000000246 RDI: ffff88007eb8c8b0
RBP: ffff88005b31fad8 R08: 666666203d206363 R09: 6131613030383866
R10: 3030383866666666 R11: 00000000000002b0 R12: ffff8800660fd800
R13: ffff8800a1a77cc2 R14: 00000000424d53fe R15: ffff88005f5a28c0
FS:  00007f7c8a2897c0(0000) GS:ffff88007eb80000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: ffff8800a1a77cc6 CR3: 000000005b281000 CR4: 00000000000006e0
Stack:
 ffff88005b31fa70 ffffffff88278789 00000000000001d3 ffff88005f5a2a80
 ffffffff00000003 ffff88005d029d00 ffff88006fde05a0 0000000000000000
 ffff88005b31fc78 ffff88006fde0780 ffff88005b31fb2f 0000000100000fe0
Call Trace:
 [<ffffffff88278789>] ? cifsConvertToUTF16+0x159/0x2d0
 [<ffffffff8828cf68>] smb2_open_file+0x98/0x210
 [<ffffffff8811e80c>] ? __kmalloc+0x1c/0xe0
 [<ffffffff882685f4>] cifs_open+0x2a4/0x720
 [<ffffffff88122cef>] do_dentry_open+0x1ff/0x310
 [<ffffffff88268350>] ? cifsFileInfo_get+0x30/0x30
 [<ffffffff88123d92>] vfs_open+0x52/0x60
 [<ffffffff88131dd0>] path_openat+0x170/0xf70
 [<ffffffff88097d48>] ? remove_wait_queue+0x48/0x50
 [<ffffffff88133a29>] do_filp_open+0x79/0xd0
 [<ffffffff8813f2ca>] ? __alloc_fd+0x3a/0x170
 [<ffffffff881240c4>] do_sys_open+0x114/0x1e0
 [<ffffffff881241a9>] SyS_open+0x19/0x20
 [<ffffffff8896e257>] entry_SYSCALL_64_fastpath+0x12/0x6a
Code: 4d 8d 6c 07 04 31 c0 4c 89 ee e8 47 6f e5 ff 31 c9 41 89 ce 44 89 f1 48 c7 c7 28 b1 bd 88 31 c0 49 01 cd 4c 89 ee e8 2b 6f e5 ff <45> 0f b7 75 04 48 c7 c7 31 b1 bd 88 31 c0 4d 01 ee 4c 89 f6 e8
RIP  [<ffffffff8828a734>] SMB2_open+0x804/0x960
 RSP <ffff88005b31fa08>
CR2: ffff8800a1a77cc6
---[ end trace d9f69ba64feee469 ]---

Signed-off-by: Justin Maggard <jmaggard@netgear.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fbcon: set a default value to blink interval

commit a1e533ec07d583d01349ef13c0c965b8633e1b91 upstream.

Since commit 27a4c827c34ac4256a190cc9d24607f953c1c459
fbcon: use the cursor blink interval provided by vt

two attempts have been made at fixing a possible hang caused by
cursor_timer_handler. That function registers a timer to be triggered at
"jiffies + fbcon_ops.cur_blink_jiffies".

A new case had been encountered during initialisation of clcd-pl11x:

    fbcon_fb_registered
    do_fbcon_takeover

    ->  do_register_con_driver
        fbcon_startup
    (A) add_cursor_timer (with cur_blink_jiffies = 0)

    ->  do_bind_con_driver
        visual_init
        fbcon_init
    (B) cur_blink_jiffies = msecs_to_jiffies(vc->vc_cur_blink_ms);

If we take an softirq anywhere between A and B (and we do),
cursor_timer_handler executes indefinitely.

Instead of patching all possible paths that lead to this case one at a
time, fix the issue at the source and initialise cur_blink_jiffies to
200ms when allocating fbcon_ops. This was its default value before
aforesaid commit. fbcon_cursor or fbcon_init will refine this value
downstream.

Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Tested-by: Scot Doyle <lkml14@scotdoyle.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kvm: x86: Update tsc multiplier on change.

commit 2680d6da455b636dd006636780c0f235c6561d70 upstream.

vmx.c writes the TSC_MULTIPLIER field in vmx_vcpu_load, but only when a
vcpu has migrated physical cpus. Record the last value written and
update in vmx_vcpu_load on any change, otherwise a cpu migration must
occur for TSC frequency scaling to take effect.

Fixes: ff2c3a1803775cc72dc6f624b59554956396b0ee
Signed-off-by: Owen Hofmann <osh@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mips/kvm: fix ioctl error handling

commit 0178fd7dcc4451fcb90bec5e91226586962478d2 upstream.

Returning directly whatever copy_to_user(...) or copy_from_user(...)
returns may not do the right thing if there's a pagefault:
copy_to_user/copy_from_user return the number of bytes not copied in
this case, but ioctls need to return -EFAULT instead.

Fix up kvm on mips to do
return copy_to_user(...)) ?  -EFAULT : 0;
and
return copy_from_user(...)) ?  -EFAULT : 0;

everywhere.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Fix ptrace syscall number and return value modification

commit 98e8b6c9ac9d1b1e9d1122dfa6783d5d566bb8f7 upstream.

Mike Frysinger reported that his ptrace testcase showed strange
behaviour on parisc: It was not possible to avoid a syscall and the
return value of a syscall couldn't be changed.

To modify a syscall number, we were missing to save the new syscall
number to gr20 which is then picked up later in assembly again.

The effect that the return value couldn't be changed is a side-effect of
another bug in the assembly code. When a process is ptraced, userspace
expects each syscall to report entrance and exit of a syscall.  If a
syscall number was given which doesn't exist, we jumped to the normal
syscall exit code instead of informing userspace that the (non-existant)
syscall exits. This unexpected behaviour confuses userspace and thus the
bug was misinterpreted as if we can't change the return value.

This patch fixes both problems and was tested on 64bit kernel with
32bit userspace.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: Mike Frysinger <vapier@gentoo.org>
Tested-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: keystone: Fix MSI code that retrieves struct pcie_port pointer

commit 79e3f4a853ed161cd4c06d84b50beebf961a47c6 upstream.

Commit cbce7900598c ("PCI: designware: Make driver arch-agnostic") changed
the host bridge sysdata pointer from the ARM pci_sys_data to the DesignWare
pcie_port structure, and changed pcie-designware.c to reflect that.  But it
did not change the corresponding code in pci-keystone-dw.c, so it caused
crashes on Keystone:

  Unable to handle kernel NULL pointer dereference at virtual address 00000030
  pgd = c0003000
  [00000030] *pgd=80000800004003, *pmd=00000000
  Internal error: Oops: 206 [#1] PREEMPT SMP ARM
  CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.2-00139-gb74f926 #2
  Hardware name: Keystone
  PC is at ks_dw_pcie_msi_irq_unmask+0x24/0x58

Change pci-keystone-dw.c to expect sysdata to be the struct pcie_port
pointer.

[bhelgaas: changelog]
Fixes: cbce7900598c ("PCI: designware: Make driver arch-agnostic")
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: Initialize max_dev_sectors to 0

commit 5f009d3f8e6685fe8c6215082c1696a08b411220 upstream.

The new queue limit is not used by the majority of block drivers, and
should be initialized to 0 for the driver's requested settings to be used.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: mask out WC from BO on unsupported arches

commit a187f17f0e15a046aa5d7263b35df55230d92779 upstream.

Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: async-thread: Fix a use-after-free error for trace

commit 0a95b851370b84a4b9d92ee6d1fa0926901d0454 upstream.

Parameter of trace_btrfs_work_queued() can be freed in its workqueue.
So no one use use that pointer after queue_work().

Fix the user-after-free bug by move the trace line before queue_work().

Reported-by: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: Fix no_space in write and rm loop

commit e1746e8381cd2af421f75557b5cae3604fc18b35 upstream.

I see no_space in v4.4-rc1 again in xfstests generic/102.
It happened randomly in some node only.
(one of 4 phy-node, and a kvm with non-virtio block driver)

By bisect, we can found the first-bad is:
 commit bdced438acd8 ("block: setup bi_phys_segments after splitting")'
But above patch only triggered the bug by making bio operation
faster(or slower).

Main reason is in our space_allocating code, we need to commit
page writeback before wait it complish, this patch fixed above
bug.

BTW, there is another reason for generic/102 fail, caused by
disable default mixed-blockgroup, I'll fix it in xfstests.

Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: fix deadlock running delayed iputs at transaction commit time

commit c2d6cb1636d235257086f939a8194ef0bf93af6e upstream.

While running a stress test I ran into a deadlock when running the delayed
iputs at transaction time, which produced the following report and trace:

[  886.399989] =============================================
[  886.400871] [ INFO: possible recursive locking detected ]
[  886.401663] 4.4.0-rc6-btrfs-next-18+ #1 Not tainted
[  886.402384] ---------------------------------------------
[  886.403182] fio/8277 is trying to acquire lock:
[  886.403568]  (&fs_info->delayed_iput_sem){++++..}, at: [<ffffffffa0538823>] btrfs_run_delayed_iputs+0x36/0xbf [btrfs]
[  886.403568]
[  886.403568] but task is already holding lock:
[  886.403568]  (&fs_info->delayed_iput_sem){++++..}, at: [<ffffffffa0538823>] btrfs_run_delayed_iputs+0x36/0xbf [btrfs]
[  886.403568]
[  886.403568] other info that might help us debug this:
[  886.403568]  Possible unsafe locking scenario:
[  886.403568]
[  886.403568]        CPU0
[  886.403568]        ----
[  886.403568]   lock(&fs_info->delayed_iput_sem);
[  886.403568]   lock(&fs_info->delayed_iput_sem);
[  886.403568]
[  886.403568]  *** DEADLOCK ***
[  886.403568]
[  886.403568]  May be due to missing lock nesting notation
[  886.403568]
[  886.403568] 3 locks held by fio/8277:
[  886.403568]  #0:  (sb_writers#11){.+.+.+}, at: [<ffffffff81174c4c>] __sb_start_write+0x5f/0xb0
[  886.403568]  #1:  (&sb->s_type->i_mutex_key#15){+.+.+.}, at: [<ffffffffa054620d>] btrfs_file_write_iter+0x73/0x408 [btrfs]
[  886.403568]  #2:  (&fs_info->delayed_iput_sem){++++..}, at: [<ffffffffa0538823>] btrfs_run_delayed_iputs+0x36/0xbf [btrfs]
[  886.403568]
[  886.403568] stack backtrace:
[  886.403568] CPU: 6 PID: 8277 Comm: fio Not tainted 4.4.0-rc6-btrfs-next-18+ #1
[  886.403568] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014
[  886.403568]  0000000000000000 ffff88009f80f770 ffffffff8125d4fd ffffffff82af1fc0
[  886.403568]  ffff88009f80f830 ffffffff8108e5f9 0000000200000000 ffff88009fd92290
[  886.403568]  0000000000000000 ffffffff82af1fc0 ffffffff829cfb01 00042b216d008804
[  886.403568] Call Trace:
[  886.403568]  [<ffffffff8125d4fd>] dump_stack+0x4e/0x79
[  886.403568]  [<ffffffff8108e5f9>] __lock_acquire+0xd42/0xf0b
[  886.403568]  [<ffffffff810c22db>] ? __module_address+0xdf/0x108
[  886.403568]  [<ffffffff8108eb77>] lock_acquire+0x10d/0x194
[  886.403568]  [<ffffffff8108eb77>] ? lock_acquire+0x10d/0x194
[  886.403568]  [<ffffffffa0538823>] ? btrfs_run_delayed_iputs+0x36/0xbf [btrfs]
[  886.489542]  [<ffffffff8148556b>] down_read+0x3e/0x4d
[  886.489542]  [<ffffffffa0538823>] ? btrfs_run_delayed_iputs+0x36/0xbf [btrfs]
[  886.489542]  [<ffffffffa0538823>] btrfs_run_delayed_iputs+0x36/0xbf [btrfs]
[  886.489542]  [<ffffffffa0533953>] btrfs_commit_transaction+0x8f5/0x96e [btrfs]
[  886.489542]  [<ffffffffa0521d7a>] flush_space+0x435/0x44a [btrfs]
[  886.489542]  [<ffffffffa052218b>] ? reserve_metadata_bytes+0x26a/0x384 [btrfs]
[  886.489542]  [<ffffffffa05221ae>] reserve_metadata_bytes+0x28d/0x384 [btrfs]
[  886.489542]  [<ffffffffa052256c>] ? btrfs_block_rsv_refill+0x58/0x96 [btrfs]
[  886.489542]  [<ffffffffa0522584>] btrfs_block_rsv_refill+0x70/0x96 [btrfs]
[  886.489542]  [<ffffffffa053d747>] btrfs_evict_inode+0x394/0x55a [btrfs]
[  886.489542]  [<ffffffff81188e31>] evict+0xa7/0x15c
[  886.489542]  [<ffffffff81189878>] iput+0x1d3/0x266
[  886.489542]  [<ffffffffa053887c>] btrfs_run_delayed_iputs+0x8f/0xbf [btrfs]
[  886.489542]  [<ffffffffa0533953>] btrfs_commit_transaction+0x8f5/0x96e [btrfs]
[  886.489542]  [<ffffffff81085096>] ? signal_pending_state+0x31/0x31
[  886.489542]  [<ffffffffa0521191>] btrfs_alloc_data_chunk_ondemand+0x1d7/0x288 [btrfs]
[  886.489542]  [<ffffffffa0521282>] btrfs_check_data_free_space+0x40/0x59 [btrfs]
[  886.489542]  [<ffffffffa05228f5>] btrfs_delalloc_reserve_space+0x1e/0x4e [btrfs]
[  886.489542]  [<ffffffffa053620a>] btrfs_direct_IO+0x10c/0x27e [btrfs]
[  886.489542]  [<ffffffff8111d9a1>] generic_file_direct_write+0xb3/0x128
[  886.489542]  [<ffffffffa05463c3>] btrfs_file_write_iter+0x229/0x408 [btrfs]
[  886.489542]  [<ffffffff8108ae38>] ? __lock_is_held+0x38/0x50
[  886.489542]  [<ffffffff8117279e>] __vfs_write+0x7c/0xa5
[  886.489542]  [<ffffffff81172cda>] vfs_write+0xa0/0xe4
[  886.489542]  [<ffffffff811734cc>] SyS_write+0x50/0x7e
[  886.489542]  [<ffffffff814872d7>] entry_SYSCALL_64_fastpath+0x12/0x6f
[ 1081.852335] INFO: task fio:8244 blocked for more than 120 seconds.
[ 1081.854348]       Not tainted 4.4.0-rc6-btrfs-next-18+ #1
[ 1081.857560] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1081.863227] fio        D ffff880213f9bb28     0  8244   8240 0x00000000
[ 1081.868719]  ffff880213f9bb28 00ffffff810fc6b0 ffffffff0000000a ffff88023ed55240
[ 1081.872499]  ffff880206b5d400 ffff880213f9c000 ffff88020a4d5318 ffff880206b5d400
[ 1081.876834]  ffffffff00000001 ffff880206b5d400 ffff880213f9bb40 ffffffff81482ba4
[ 1081.880782] Call Trace:
[ 1081.881793]  [<ffffffff81482ba4>] schedule+0x7f/0x97
[ 1081.883340]  [<ffffffff81485eb5>] rwsem_down_write_failed+0x2d5/0x325
[ 1081.895525]  [<ffffffff8108d48d>] ? trace_hardirqs_on_caller+0x16/0x1ab
[ 1081.897419]  [<ffffffff81269723>] call_rwsem_down_write_failed+0x13/0x20
[ 1081.899251]  [<ffffffff81269723>] ? call_rwsem_down_write_failed+0x13/0x20
[ 1081.901063]  [<ffffffff81089fae>] ? __down_write_nested.isra.0+0x1f/0x21
[ 1081.902365]  [<ffffffff814855bd>] down_write+0x43/0x57
[ 1081.903846]  [<ffffffffa05211b0>] ? btrfs_alloc_data_chunk_ondemand+0x1f6/0x288 [btrfs]
[ 1081.906078]  [<ffffffffa05211b0>] btrfs_alloc_data_chunk_ondemand+0x1f6/0x288 [btrfs]
[ 1081.908846]  [<ffffffff8108d461>] ? mark_held_locks+0x56/0x6c
[ 1081.910409]  [<ffffffffa0521282>] btrfs_check_data_free_space+0x40/0x59 [btrfs]
[ 1081.912482]  [<ffffffffa05228f5>] btrfs_delalloc_reserve_space+0x1e/0x4e [btrfs]
[ 1081.914597]  [<ffffffffa053620a>] btrfs_direct_IO+0x10c/0x27e [btrfs]
[ 1081.919037]  [<ffffffff8111d9a1>] generic_file_direct_write+0xb3/0x128
[ 1081.920754]  [<ffffffffa05463c3>] btrfs_file_write_iter+0x229/0x408 [btrfs]
[ 1081.922496]  [<ffffffff8108ae38>] ? __lock_is_held+0x38/0x50
[ 1081.923922]  [<ffffffff8117279e>] __vfs_write+0x7c/0xa5
[ 1081.925275]  [<ffffffff81172cda>] vfs_write+0xa0/0xe4
[ 1081.926584]  [<ffffffff811734cc>] SyS_write+0x50/0x7e
[ 1081.927968]  [<ffffffff814872d7>] entry_SYSCALL_64_fastpath+0x12/0x6f
[ 1081.985293] INFO: lockdep is turned off.
[ 1081.986132] INFO: task fio:8249 blocked for more than 120 seconds.
[ 1081.987434]       Not tainted 4.4.0-rc6-btrfs-next-18+ #1
[ 1081.988534] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1081.990147] fio        D ffff880218febbb8     0  8249   8240 0x00000000
[ 1081.991626]  ffff880218febbb8 00ffffff81486b8e ffff88020000000b ffff88023ed75240
[ 1081.993258]  ffff8802120a9a00 ffff880218fec000 ffff88020a4d5318 ffff8802120a9a00
[ 1081.994850]  ffffffff00000001 ffff8802120a9a00 ffff880218febbd0 ffffffff81482ba4
[ 1081.996485] Call Trace:
[ 1081.997037]  [<ffffffff81482ba4>] schedule+0x7f/0x97
[ 1081.998017]  [<ffffffff81485eb5>] rwsem_down_write_failed+0x2d5/0x325
[ 1081.999241]  [<ffffffff810852a5>] ? finish_wait+0x6d/0x76
[ 1082.000306]  [<ffffffff81269723>] call_rwsem_down_write_failed+0x13/0x20
[ 1082.001533]  [<ffffffff81269723>] ? call_rwsem_down_write_failed+0x13/0x20
[ 1082.002776]  [<ffffffff81089fae>] ? __down_write_nested.isra.0+0x1f/0x21
[ 1082.003995]  [<ffffffff814855bd>] down_write+0x43/0x57
[ 1082.005000]  [<ffffffffa05211b0>] ? btrfs_alloc_data_chunk_ondemand+0x1f6/0x288 [btrfs]
[ 1082.007403]  [<ffffffffa05211b0>] btrfs_alloc_data_chunk_ondemand+0x1f6/0x288 [btrfs]
[ 1082.008988]  [<ffffffffa0545064>] btrfs_fallocate+0x7c1/0xc2f [btrfs]
[ 1082.010193]  [<ffffffff8108a1ba>] ? percpu_down_read+0x4e/0x77
[ 1082.011280]  [<ffffffff81174c4c>] ? __sb_start_write+0x5f/0xb0
[ 1082.012265]  [<ffffffff81174c4c>] ? __sb_start_write+0x5f/0xb0
[ 1082.013021]  [<ffffffff811712e4>] vfs_fallocate+0x170/0x1ff
[ 1082.013738]  [<ffffffff81181ebb>] ioctl_preallocate+0x89/0x9b
[ 1082.014778]  [<ffffffff811822d7>] do_vfs_ioctl+0x40a/0x4ea
[ 1082.015778]  [<ffffffff81176ea7>] ? SYSC_newfstat+0x25/0x2e
[ 1082.016806]  [<ffffffff8118b4de>] ? __fget_light+0x4d/0x71
[ 1082.017789]  [<ffffffff8118240e>] SyS_ioctl+0x57/0x79
[ 1082.018706]  [<ffffffff814872d7>] entry_SYSCALL_64_fastpath+0x12/0x6f

This happens because we can recursively acquire the semaphore
fs_info->delayed_iput_sem when attempting to allocate space to satisfy
a file write request as shown in the first trace above - when committing
a transaction we acquire (down_read) the semaphore before running the
delayed iputs, and when running a delayed iput() we can end up calling
an inode's eviction handler, which in turn commits another transaction
and attempts to acquire (down_read) again the semaphore to run more
delayed iput operations.
This results in a deadlock because if a task acquires multiple times a
semaphore it should invoke down_read_nested() with a different lockdep
class for each level of recursion.

Fix this by simplifying the implementation and use a mutex instead that
is acquired by the cleaner kthread before it runs the delayed iputs
instead of always acquiring a semaphore before delayed references are
run from anywhere.

Fixes: d7c151717a1e (btrfs: Fix NO_SPACE bug caused by delayed-iput)
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: sh: Restore legacy clock domain on SuperH platforms

commit 0378ba4899d5fbd8494ed6580cbc81d7b44dbac6 upstream.

CONFIG_ARCH_SHMOBILE is not only enabled for Renesas ARM platforms
(which are DT based and multi-platform), but also on a select set of
Renesas SuperH platforms (SH7722/SH7723/SH7724/SH7343/SH7366). Hence
since commit 0ba58de231066e47 ("drivers: sh: Get rid of
CONFIG_ARCH_SHMOBILE_MULTI"), the legacy clock domain is no longer
installed on these SuperH platforms, and module clocks may not be
enabled when needed, leading to driver failures.

To fix this, add an additional check for CONFIG_OF.

Fixes: 0ba58de231066e47 ("drivers: sh: Get rid of CONFIG_ARCH_SHMOBILE_MULTI").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

use ->d_seq to get coherency between ->d_inode and ->d_flags

commit a528aca7f359f4b0b1d72ae406097e491a5ba9ea upstream.

Games with ordering and barriers are way too brittle.  Just
bump ->d_seq before and after updating ->d_inode and ->d_flags
type bits, so that verifying ->d_seq would guarantee they are
coherent.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.4.4

iwlwifi: mvm: don't allow sched scans without matches to be started

commit 5e56276e7555b34550d51459a801ff75eca8b907 upstream.

The firmware can perform a scheduled scan with not matchsets passed,
but it can't send notification that results were found.  Since the
userspace then cannot know when we got new results and the firmware
wouldn't trigger a wake in case we are sleeping, it's better not to
allow scans without matchsets.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=110831

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: update and fix 7265 series PCI IDs

commit 006bda75d81fd27a583a3b310e9444fea2aa6ef2 upstream.

Update and fix some 7265 PCI IDs entries.

Signed-off-by: Oren Givon <oren.givon@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: pcie: properly configure the debug buffer size for 8000

commit 62d7476d958ce06d7a10b02bdb30006870286fe2 upstream.

8000 device family has a new debug engine that needs to be
configured differently than 7000's.
The debug engine's DMA works in chunks of memory and the
size of the buffer really means the start of the last
chunk. Since one chunk is 256-byte long, we should
configure the device to write to buffer_size - 256.
This fixes a situation were the device would write to
memory it is not allowed to access.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: dvm: fix WoWLAN

commit a1cdb1c59c8c203de2731fc6910598ed19c97e41 upstream.

My commit below introduced a mutex in the transport to
prevent concurrent operations. To do so, it added a flag
(is_down) to make sure the transport is in the right state.
This uncoverred an bug that didn't cause any harm until
now: iwldvm calls stop_device and then starts the firmware
without calling start_hw in between. While this flow is
fine from the device configuration point of view (register,
etc...), it is now forbidden by the new is_down flag.
This led to this error to appear:
iwlwifi 0000:05:00.0: Can't start_fw since the HW hasn't been started
and the suspend would fail.

This fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=109591

Reported-by: Bogdan Bogush <bogdan.s.bogush@gmail.com>
Fixes=fa9f3281cbb1 ("iwlwifi: pcie: lock start_hw / start_fw / stop_device")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

security: let security modules use PTRACE_MODE_* with bitmasks

commit 3dfb7d8cdbc7ea0c2970450e60818bb3eefbad69 upstream.

It looks like smack and yama weren't aware that the ptrace mode
can have flags ORed into it - PTRACE_MODE_NOAUDIT until now, but
only for /proc/$pid/stat, and with the PTRACE_MODE_*CREDS patch,
all modes have flags ORed into them.

Signed-off-by: Jann Horn <jann@thejh.net>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: "Serge E. Hallyn" <serge.hallyn@ubuntu.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/cma: Fix RDMA port validation for iWarp

commit 649367735ee5dedb128d9fac0b86ba7e0fe7ae3b upstream.

cma_validate_port wrongly assumed that Ethernet devices are RoCE
devices and thus their ndev should be matched in the GID table.
This broke the iWarp support. Fixing that matching the ndev only if
we work on a RoCE port.

Cc: <stable@vger.kernel.org> # 4.4.x-
Fixes: abae1b71dd37 ('IB/cma: cma_validate_port should verify the port
     and netdevice')
Reported-by: Hariprasad Shenai <hariprasad@chelsio.com>
Tested-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/irq: Plug vector cleanup race

commit 98229aa36caa9c769b13565523de9b813013c703 upstream.

We still can end up with a stale vector due to the following:

CPU0                          CPU1                      CPU2
lock_vector()
data->move_in_progress=0
sendIPI()
unlock_vector()
                              set_affinity()
                              assign_irq_vector()
                              lock_vector()             handle_IPI
                              move_in_progress = 1      lock_vector()
                              unlock_vector()
                                                        move_in_progress == 1

So we need to serialize the vector assignment against a pending cleanup. The
solution is rather simple now. We not only check for the move_in_progress flag
in assign_irq_vector(), we also check whether there is still a cleanup pending
in the old_domain cpumask. If so, we return -EBUSY to the caller and let him
deal with it. Though we have to be careful in the cpu unplug case. If the
cleanout has not yet completed then the following setaffinity() call would
return -EBUSY. Add code which prevents this.

Full context is here: http://lkml.kernel.org/r/5653B688.4050809@stratus.com

Reported-and-tested-by: Joe Lawrence <joe.lawrence@stratus.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Borislav Petkov <bp@alien8.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Jeremiah Mahler <jmmahler@gmail.com>
Cc: andy.shevchenko@gmail.com
Cc: Guenter Roeck <linux@roeck-us.net>
Link: http://lkml.kernel.org/r/20151231160107.207265407@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/irq: Call irq_force_move_complete with irq descriptor

commit 90a2282e23f0522e4b3f797ad447c5e91bf7fe32 upstream.

First of all there is no point in looking up the irq descriptor again, but we
also need the descriptor for the final cleanup race fix in the next
patch. Make that change seperate. No functional difference.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Borislav Petkov <bp@alien8.de>
Tested-by: Joe Lawrence <joe.lawrence@stratus.com>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Jeremiah Mahler <jmmahler@gmail.com>
Cc: andy.shevchenko@gmail.com
Cc: Guenter Roeck <linux@roeck-us.net>
Link: http://lkml.kernel.org/r/20151231160107.125211743@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/irq: Remove outgoing CPU from vector cleanup mask

commit 56d7d2f4bbd00fb198b7907cb3ab657d06115a42 upstream.

We want to synchronize new vector assignments with a pending cleanup. Remove a
dying cpu from a pending cleanup mask.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Borislav Petkov <bp@alien8.de>
Tested-by: Joe Lawrence <joe.lawrence@stratus.com>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Jeremiah Mahler <jmmahler@gmail.com>
Cc: andy.shevchenko@gmail.com
Cc: Guenter Roeck <linux@roeck-us.net>
Link: http://lkml.kernel.org/r/20151231160107.045961667@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/irq: Remove the cpumask allocation from send_cleanup_vector()

commit 5da0c1217f05d2ccc9a8ed6e6e5c23a8a1d24dd6 upstream.

There is no need to allocate a new cpumask for sending the cleanup vector. The
old_domain mask is now protected by the vector_lock, so we can safely remove
the offline cpus from it and send the IPI with the resulting mask.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Borislav Petkov <bp@alien8.de>
Tested-by: Joe Lawrence <joe.lawrence@stratus.com>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Jeremiah Mahler <jmmahler@gmail.com>
Cc: andy.shevchenko@gmail.com
Cc: Guenter Roeck <linux@roeck-us.net>
Link: http://lkml.kernel.org/r/20151231160106.967993932@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/irq: Clear move_in_progress before sending cleanup IPI

commit c1684f5035b60e9f98566493e869496fb5de1d89 upstream.

send_cleanup_vector() fiddles with the old_domain mask unprotected because it
relies on the protection by the move_in_progress flag. But this is fatal, as
the flag is reset after the IPI has been sent. So a cpu which receives the IPI
can still see the flag set and therefor ignores the cleanup request. If no
other cleanup request happens then the vector stays stale on that cpu and in
case of an irq removal the vector still persists. That can lead to use after
free when the next cleanup IPI happens.

Protect the code with vector_lock and clear move_in_progress before sending
the IPI.

This does not plug the race which Joe reported because:

CPU0                          CPU1                      CPU2
lock_vector()
data->move_in_progress=0
sendIPI()
unlock_vector()
                              set_affinity()
                              assign_irq_vector()
                              lock_vector()             handle_IPI
                              move_in_progress = 1      lock_vector()
                              unlock_vector()
                                                        move_in_progress == 1

The full fix comes with a later patch.

Reported-and-tested-by: Joe Lawrence <joe.lawrence@stratus.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Borislav Petkov <bp@alien8.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Jeremiah Mahler <jmmahler@gmail.com>
Cc: andy.shevchenko@gmail.com
Cc: Guenter Roeck <linux@roeck-us.net>
Link: http://lkml.kernel.org/r/20151231160106.892412198@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/irq: Remove offline cpus from vector cleanup

commit 847667ef10356b824a11c853fc8a8b1b437b6a8d upstream.

No point of keeping offline cpus in the cleanup mask.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Borislav Petkov <bp@alien8.de>
Tested-by: Joe Lawrence <joe.lawrence@stratus.com>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Jeremiah Mahler <jmmahler@gmail.com>
Cc: andy.shevchenko@gmail.com
Cc: Guenter Roeck <linux@roeck-us.net>
Link: http://lkml.kernel.org/r/20151231160106.808642683@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/irq: Get rid of code duplication

commit ab25ac02148b600e645f77cfb8b8ea415ed75bb4 upstream.

Reusing an existing vector and assigning a new vector has duplicated
code. Consolidate it.

This is also a preparatory patch for finally plugging the cleanup race.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Borislav Petkov <bp@alien8.de>
Tested-by: Joe Lawrence <joe.lawrence@stratus.com>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Jeremiah Mahler <jmmahler@gmail.com>
Cc: andy.shevchenko@gmail.com
Cc: Guenter Roeck <linux@roeck-us.net>
Link: http://lkml.kernel.org/r/20151231160106.721599216@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/irq: Copy vectormask instead of an AND operation

commit 9ac15b7a8af4cf3337a101498c0ed690d23ade75 upstream.

In the case that the new vector mask is a subset of the existing mask there is
no point to do a AND operation of currentmask & newmask. The result is
newmask. So we can simply copy the new mask to the current mask and be done
with it. Preparatory patch for further consolidation.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Borislav Petkov <bp@alien8.de>
Tested-by: Joe Lawrence <joe.lawrence@stratus.com>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Jeremiah Mahler <jmmahler@gmail.com>
Cc: andy.shevchenko@gmail.com
Cc: Guenter Roeck <linux@roeck-us.net>
Link: http://lkml.kernel.org/r/20151231160106.640253454@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/irq: Check vector allocation early

commit 3716fd27a604d61a91cda47083504971486b80f1 upstream.

__assign_irq_vector() uses the vector_cpumask which is assigned by
apic->vector_allocation_domain() without doing basic sanity checks. That can
result in a situation where the final assignement of a newly found vector
fails in apic->cpu_mask_to_apicid_and(). So we have to do rollbacks for no
reason.

apic->cpu_mask_to_apicid_and() only fails if

  vector_cpumask & requested_cpumask & cpu_online_mask

is empty.

Check for this condition right away and if the result is empty try immediately
the next possible cpu in the requested mask. So in case of a failure the old
setting is unchanged and we can remove the rollback code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Borislav Petkov <bp@alien8.de>
Tested-by: Joe Lawrence <joe.lawrence@stratus.com>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Jeremiah Mahler <jmmahler@gmail.com>
Cc: andy.shevchenko@gmail.com
Cc: Guenter Roeck <linux@roeck-us.net>
Link: http://lkml.kernel.org/r/20151231160106.561877324@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/irq: Reorganize the search in assign_irq_vector

commit 95ffeb4b5baca266e1d0d2bc90f1513e6f419cdd upstream.

Split out the code which advances the target cpu for the search so we can
reuse it for the next patch which adds an early validation check for the
vectormask which we get from the apic.

Add comments while at it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Borislav Petkov <bp@alien8.de>
Tested-by: Joe Lawrence <joe.lawrence@stratus.com>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Jeremiah Mahler <jmmahler@gmail.com>
Cc: andy.shevchenko@gmail.com
Cc: Guenter Roeck <linux@roeck-us.net>
Link: http://lkml.kernel.org/r/20151231160106.484562040@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/irq: Reorganize the return path in assign_irq_vector

commit 433cbd57d190a1cdd02f243df41c3d7f55ec4b94 upstream.

Use an explicit goto for the cases where we have success in the search/update
and return -ENOSPC if the search loop ends due to no space.

Preparatory patch for fixes. No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Borislav Petkov <bp@alien8.de>
Tested-by: Joe Lawrence <joe.lawrence@stratus.com>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Jeremiah Mahler <jmmahler@gmail.com>
Cc: andy.shevchenko@gmail.com
Cc: Guenter Roeck <linux@roeck-us.net>
Link: http://lkml.kernel.org/r/20151231160106.403491024@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/irq: Do not use apic_chip_data.old_domain as temporary buffer

commit 8a580f70f6936ec095da217018cdeeb5835c0207 upstream.

Function __assign_irq_vector() makes use of apic_chip_data.old_domain as a
temporary buffer, which is in the way of using apic_chip_data.old_domain for
synchronizing the vector cleanup with the vector assignement code.

Use a proper temporary cpumask for this.

[ tglx: Renamed the mask to searched_cpumask for clarity ]

Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Tested-by: Borislav Petkov <bp@alien8.de>
Tested-by: Joe Lawrence <joe.lawrence@stratus.com>
Cc: Jeremiah Mahler <jmmahler@gmail.com>
Cc: andy.shevchenko@gmail.com
Cc: Guenter Roeck <linux@roeck-us.net>
Link: http://lkml.kernel.org/r/1450880014-11741-1-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/irq: Validate that irq descriptor is still active

commit 36f34c8c63da3e272fd66f91089228c22d2b6e8b upstream.

In fixup_irqs() we unconditionally dereference the irq chip of an irq
descriptor. The descriptor might still be valid, but already cleaned up,
i.e. the chip removed. Add a check for this condition.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joe Lawrence <joe.lawrence@stratus.com>
Cc: Jeremiah Mahler <jmmahler@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: andy.shevchenko@gmail.com
Cc: Guenter Roeck <linux@roeck-us.net>
Link: http://lkml.kernel.org/r/20151231160106.236423282@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/irq: Fix a race in x86_vector_free_irqs()

commit 111abeba67e0dbdc26537429de9155e4f1d807d8 upstream.

There's a race condition between

x86_vector_free_irqs()
{
free_apic_chip_data(irq_data->chip_data);
xxxxx //irq_data->chip_data has been freed, but the pointer
//hasn't been reset yet
irq_domain_reset_irq_data(irq_data);
}

and

smp_irq_move_cleanup_interrupt()
{
raw_spin_lock(&vector_lock);
data = apic_chip_data(irq_desc_get_irq_data(desc));
access data->xxxx // may access freed memory
raw_spin_unlock(&desc->lock);
}

which may cause smp_irq_move_cleanup_interrupt() to access freed memory.

Call irq_domain_reset_irq_data(), which clears the pointer with vector lock
held.

[ tglx: Free memory outside of lock held region. ]

Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Tested-by: Borislav Petkov <bp@alien8.de>
Tested-by: Joe Lawrence <joe.lawrence@stratus.com>
Cc: Jeremiah Mahler <jmmahler@gmail.com>
Cc: andy.shevchenko@gmail.com
Cc: Guenter Roeck <linux@roeck-us.net>
Link: http://lkml.kernel.org/r/1450880014-11741-3-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/irq: Call chip->irq_set_affinity in proper context

commit e23b257c293ce4bcc8cabb2aa3097b6ed8a8261a upstream.

setup_ioapic_dest() calls irqchip->irq_set_affinity() completely
unprotected. That's wrong in several aspects:

 - it opens a race window where irq_set_affinity() can be interrupted and the
   irq chip left in unconsistent state.

 - it triggers a lockdep splat when we fix the vector race for 4.3+ because
   vector lock is taken with interrupts enabled.

The proper calling convention is irq descriptor lock held and interrupts
disabled.

Reported-and-tested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Jeremiah Mahler <jmmahler@gmail.com>
Cc: andy.shevchenko@gmail.com
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Joe Lawrence <joe.lawrence@stratus.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1601140919420.3575@nanos
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/entry/compat: Add missing CLAC to entry_INT80_32

commit 3d44d51bd339766f0178f0cf2e8d048b4a4872aa upstream.

This doesn't seem to fix a regression -- I don't think the CLAC was
ever there.

I double-checked in a debugger: entries through the int80 gate do
not automatically clear AC.

Stable maintainers: I can provide a backport to 4.3 and earlier if
needed.  This needs to be backported all the way to 3.10.

Reported-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 63bcff2a307b ("x86, smap: Add STAC and CLAC instructions to control user space access")
Link: http://lkml.kernel.org/r/b02b7e71ae54074be01fc171cbd4b72517055c0e.1456345086.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mpx: Fix off-by-one comparison with nr_registers

commit 9bf148cb0812595bfdf5100bd2c07e9bec9c6ef5 upstream.

In the unlikely event that regno == nr_registers then we get an array
overrun on regoff because the invalid register check is currently
off-by-one. Fix this with a check that regno is >= nr_registers instead.

Detected with static analysis using CoverityScan.

Fixes: fcc7ffd67991 "x86, mpx: Decode MPX instruction to get bound violation information"
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Link: http://lkml.kernel.org/r/1456512931-3388-1-git-send-email-colin.king@canonical.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hpfs: don't truncate the file when delete fails

commit b6853f78e763d42c7a158d8de3549c9827c604ab upstream.

The delete opration can allocate additional space on the HPFS filesystem
due to btree split. The HPFS driver checks in advance if there is
available space, so that it won't corrupt the btree if we run out of space
during splitting.

If there is not enough available space, the HPFS driver attempted to
truncate the file, but this results in a deadlock since the commit
7dd29d8d865efdb00c0542a5d2c87af8c52ea6c7 ("HPFS: Introduce a global mutex
and lock it on every callback from VFS").

This patch removes the code that tries to truncate the file and -ENOSPC is
returned instead. If the user hits -ENOSPC on delete, he should try to
delete other files (that are stored in a leaf btree node), so that the
delete operation will make some space for deleting the file stored in
non-leaf btree node.

Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

do_last(): ELOOP failure exit should be done after leaving RCU mode

commit 5129fa482b16615fd4464d2f5d23acb1b7056c66 upstream.

... or we risk seeing a bogus value of d_is_symlink() there.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

should_follow_link(): validate ->d_seq after having decided to follow

commit a7f775428b8f5808815c0e3004020cedb94cbe3b upstream.

... otherwise d_is_symlink() above might have nothing to do with
the inode value we've got.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/pcifront: Fix mysterious crashes when NUMA locality information was extracted.

commit 4d8c8bd6f2062c9988817183a91fe2e623c8aa5e upstream.

Occasionaly PV guests would crash with:

pciback 0000:00:00.1: Xen PCI mapped GSI0 to IRQ16
BUG: unable to handle kernel paging request at 0000000d1a8c0be0
.. snip..
  <ffffffff8139ce1b>] find_next_bit+0xb/0x10
  [<ffffffff81387f22>] cpumask_next_and+0x22/0x40
  [<ffffffff813c1ef8>] pci_device_probe+0xb8/0x120
  [<ffffffff81529097>] ? driver_sysfs_add+0x77/0xa0
  [<ffffffff815293e4>] driver_probe_device+0x1a4/0x2d0
  [<ffffffff813c1ddd>] ? pci_match_device+0xdd/0x110
  [<ffffffff81529657>] __device_attach_driver+0xa7/0xb0
  [<ffffffff815295b0>] ? __driver_attach+0xa0/0xa0
  [<ffffffff81527622>] bus_for_each_drv+0x62/0x90
  [<ffffffff8152978d>] __device_attach+0xbd/0x110
  [<ffffffff815297fb>] device_attach+0xb/0x10
  [<ffffffff813b75ac>] pci_bus_add_device+0x3c/0x70
  [<ffffffff813b7618>] pci_bus_add_devices+0x38/0x80
  [<ffffffff813dc34e>] pcifront_scan_root+0x13e/0x1a0
  [<ffffffff817a0692>] pcifront_backend_changed+0x262/0x60b
  [<ffffffff814644c6>] ? xenbus_gather+0xd6/0x160
  [<ffffffff8120900f>] ? put_object+0x2f/0x50
  [<ffffffff81465c1d>] xenbus_otherend_changed+0x9d/0xa0
  [<ffffffff814678ee>] backend_changed+0xe/0x10
  [<ffffffff81463a28>] xenwatch_thread+0xc8/0x190
  [<ffffffff810f22f0>] ? woken_wake_function+0x10/0x10

which was the result of two things:

When we call pci_scan_root_bus we would pass in 'sd' (sysdata)
pointer which was an 'pcifront_sd' structure. However in the
pci_device_add it expects that the 'sd' is 'struct sysdata' and
sets the dev->node to what is in sd->node (offset 4):

set_dev_node(&dev->dev, pcibus_to_node(bus));

 __pcibus_to_node(const struct pci_bus *bus)
{
        const struct pci_sysdata *sd = bus->sysdata;

        return sd->node;
}

However our structure was pcifront_sd which had nothing at that
offset:

struct pcifront_sd {
        int                        domain;    /*     0     4 */
        /* XXX 4 bytes hole, try to pack */
        struct pcifront_device *   pdev;      /*     8     8 */
}

That is an hole - filled with garbage as we used kmalloc instead of
kzalloc (the second problem).

This patch fixes the issue by:
 1) Use kzalloc to initialize to a well known state.
 2) Put 'struct pci_sysdata' at the start of 'pcifront_sd'. That
    way access to the 'node' will access the right offset.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/pciback: Save the number of MSI-X entries to be copied later.

commit d159457b84395927b5a52adb72f748dd089ad5e5 upstream.

Commit 8135cf8b092723dbfcc611fe6fdcb3a36c9951c5 (xen/pciback: Save
xen_pci_op commands before processing it) broke enabling MSI-X because
it would never copy the resulting vectors into the response.  The
number of vectors requested was being overwritten by the return value
(typically zero for success).

Save the number of vectors before processing the op, so the correct
number of vectors are copied afterwards.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/pciback: Check PF instead of VF for PCI_COMMAND_MEMORY

commit 8d47065f7d1980dde52abb874b301054f3013602 upstream.

Commit 408fb0e5aa7fda0059db282ff58c3b2a4278baa0 (xen/pciback: Don't
allow MSI-X ops if PCI_COMMAND_MEMORY is not set) prevented enabling
MSI-X on passed-through virtual functions, because it checked the VF
for PCI_COMMAND_MEMORY but this is not a valid bit for VFs.

Instead, check the physical function for PCI_COMMAND_MEMORY.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/scsiback: correct frontend counting

commit f285aa8db7cc4432c1a03f8b55ff34fe96317c11 upstream.

When adding a new frontend to xen-scsiback don't decrement the number
of active frontends in case of no error. Doing so results in a failure
when trying to remove the xen-pvscsi nexus even if no domain is using
it.

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/arm: correctly handle DMA mapping of compound pages

commit 52ba0746b3b44c86aee121babf3b2fd9b8f84090 upstream.

Currently xen_dma_map_page concludes that DMA to anything other than
the head page of a compound page must be foreign, since the PFN of the
page is that of the head.

Fix the check to instead consider the whole of a compound page to be
local if the PFN of the head passes the 1:1 check.

We can never see a compound page which is a mixture of foreign and
local sub-pages.

The comment already correctly described the intention, but fixup the
spelling and some grammar.

This fixes the various SSH protocol errors which we have been seeing
on the cubietrucks in our automated test infrastructure.

This has been broken since commit 3567258d281b ("xen/arm: use
hypercall to flush caches in map_page"), which was in v3.19-rc1.

NB arch/arm64/.../xen/page-coherent.h also includes this file.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: xen-devel@lists.xenproject.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: at91/dt: fix typo in sama5d2 pinmux descriptions

commit 5e45a2589d24573c564630990c88ac93659f8fe4 upstream.

PIN_PA15 macro has the same value as PIN_PA14 so we were overriding PA14
mux/configuration.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Reported-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Fixes: 7f16cb676c00 ("ARM: at91/dt: add sama5d2 pinmux")
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: OMAP2+: Fix onenand initialization to avoid filesystem corruption

commit 3f315c5b850fa7aff73f50de8e316b98f611a32b upstream.

Commit e7b11dc7b77b ("ARM: OMAP2+: Fix onenand rate detection to avoid
filesystem corruption") partially fixed onenand configuration when GPMC
module is reset. Finish the job by also providing the correct values in
ONENAND_REG_SYS_CFG1 register.

Fixes: e7b11dc7b77b ("ARM: OMAP2+: Fix onenand rate detection to avoid
filesystem corruption")
Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

do_last(): don't let a bogus return value from ->open() et.al. to confuse us

commit c80567c82ae4814a41287618e315a60ecf513be6 upstream.

... into returning a positive to path_openat(), which would interpret that
as "symlink had been encountered" and proceed to corrupt memory, etc.
It can only happen due to a bug in some ->open() instance or in some LSM
hook, etc., so we report any such event *and* make sure it doesn't trick
us into further unpleasantness.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernel/resource.c: fix muxed resource handling in __request_region()

commit 59ceeaaf355fa0fb16558ef7c24413c804932ada upstream.

In __request_region, if a conflict with a BUSY and MUXED resource is
detected, then the caller goes to sleep and waits for the resource to be
released.  A pointer on the conflicting resource is kept.  At wake-up
this pointer is used as a parent to retry to request the region.

A first problem is that this pointer might well be invalid (if for
example the conflicting resource have already been freed).  Another
problem is that the next call to __request_region() fails to detect a
remaining conflict.  The previously conflicting resource is passed as a
parameter and __request_region() will look for a conflict among the
children of this resource and not at the resource itself.  It is likely
to succeed anyway, even if there is still a conflict.

Instead, the parent of the conflicting resource should be passed to
__request_region().

As a fix, this patch doesn't update the parent resource pointer in the
case we have to wait for a muxed region right after.

Reported-and-tested-by: Vincent Pelletier <plr.vincent@gmail.com>
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Tested-by: Vincent Donnefort <vdonnefort@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sunrpc/cache: fix off-by-one in qword_get()

commit b7052cd7bcf3c1478796e93e3dff2b44c9e82943 upstream.

The qword_get() function NUL-terminates its output buffer.  If the input
string is in hex format \xXXXX... and the same length as the output
buffer, there is an off-by-one:

  int qword_get(char **bpp, char *dest, int bufsize)
  {
      ...
      while (len < bufsize) {
          ...
          *dest++ = (h << 4) | l;
          len++;
      }
      ...
      *dest = '\0';
      return len;
  }

This patch ensures the NUL terminator doesn't fall outside the output
buffer.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Fix showing function event in available_events

commit d045437a169f899dfb0f6f7ede24cc042543ced9 upstream.

The ftrace:function event is only displayed for parsing the function tracer
data. It is not used to enable function tracing, and does not include an
"enable" file in its event directory.

Originally, this event was kept separate from other events because it did
not have a ->reg parameter. But perf added a "reg" parameter for its use
which caused issues, because it made the event available to functions where
it was not compatible for.

Commit 9b63776fa3ca9 "tracing: Do not enable function event with enable"
added a TRACE_EVENT_FL_IGNORE_ENABLE flag that prevented the function event
from being enabled by normal trace events. But this commit missed keeping
the function event from being displayed by the "available_events" directory,
which is used to show what events can be enabled by set_event.

One documented way to enable all events is to:

 cat available_events > set_event

But because the function event is displayed in the available_events, this
now causes an INVALID error:

 cat: write error: Invalid argument

Reported-by: Chunyu Hu <chuhu@redhat.com>
Fixes: 9b63776fa3ca9 "tracing: Do not enable function event with enable"
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/eeh: Fix partial hotplug criterion

commit f6bf0fa14cf848ae770e0b7842c9b11ce2f01645 upstream.

During error recovery, the device could be removed as part of the
partial hotplug. The criterion used to come with partial hotplug
is: if the device driver provides error_detected(), slot_reset()
and resume() callbacks, it's immune from hotplug. Otherwise,
it's going to experience partial hotplug during EEH recovery. But
the criterion isn't correct enough: mlx4_core driver for Mellanox
adapters provides error_detected(), slot_reset() callbacks, but
resume() isn't there. Those Mellanox adapters won't be to involved
in the partial hotplug.

This fixes the criterion to a practical one: adpater with driver
that provides error_detected(), slot_reset() will be immune from
partial hotplug. resume() isn't mandatory.

Fixes: f2da4ccf ("powerpc/eeh: More relaxed hotplug criterion")
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: MMU: fix ubsan index-out-of-range warning

commit 17e4bce0ae63c7e03f3c7fa8d80890e7af3d4971 upstream.

Ubsan reports the following warning due to a typo in
update_accessed_dirty_bits template, the patch fixes
the typo:

[  168.791851] ================================================================================
[  168.791862] UBSAN: Undefined behaviour in arch/x86/kvm/paging_tmpl.h:252:15
[  168.791866] index 4 is out of range for type 'u64 [4]'
[  168.791871] CPU: 0 PID: 2950 Comm: qemu-system-x86 Tainted: G           O L  4.5.0-rc5-next-20160222 #7
[  168.791873] Hardware name: LENOVO 23205NG/23205NG, BIOS G2ET95WW (2.55 ) 07/09/2013
[  168.791876]  0000000000000000 ffff8801cfcaf208 ffffffff81c9f780 0000000041b58ab3
[  168.791882]  ffffffff82eb2cc1 ffffffff81c9f6b4 ffff8801cfcaf230 ffff8801cfcaf1e0
[  168.791886]  0000000000000004 0000000000000001 0000000000000000 ffffffffa1981600
[  168.791891] Call Trace:
[  168.791899]  [<ffffffff81c9f780>] dump_stack+0xcc/0x12c
[  168.791904]  [<ffffffff81c9f6b4>] ? _atomic_dec_and_lock+0xc4/0xc4
[  168.791910]  [<ffffffff81da9e81>] ubsan_epilogue+0xd/0x8a
[  168.791914]  [<ffffffff81daafa2>] __ubsan_handle_out_of_bounds+0x15c/0x1a3
[  168.791918]  [<ffffffff81daae46>] ? __ubsan_handle_shift_out_of_bounds+0x2bd/0x2bd
[  168.791922]  [<ffffffff811287ef>] ? get_user_pages_fast+0x2bf/0x360
[  168.791954]  [<ffffffffa1794050>] ? kvm_largepages_enabled+0x30/0x30 [kvm]
[  168.791958]  [<ffffffff81128530>] ? __get_user_pages_fast+0x360/0x360
[  168.791987]  [<ffffffffa181b818>] paging64_walk_addr_generic+0x1b28/0x2600 [kvm]
[  168.792014]  [<ffffffffa1819cf0>] ? init_kvm_mmu+0x1100/0x1100 [kvm]
[  168.792019]  [<ffffffff8129e350>] ? debug_check_no_locks_freed+0x350/0x350
[  168.792044]  [<ffffffffa1819cf0>] ? init_kvm_mmu+0x1100/0x1100 [kvm]
[  168.792076]  [<ffffffffa181c36d>] paging64_gva_to_gpa+0x7d/0x110 [kvm]
[  168.792121]  [<ffffffffa181c2f0>] ? paging64_walk_addr_generic+0x2600/0x2600 [kvm]
[  168.792130]  [<ffffffff812e848b>] ? debug_lockdep_rcu_enabled+0x7b/0x90
[  168.792178]  [<ffffffffa17d9a4a>] emulator_read_write_onepage+0x27a/0x1150 [kvm]
[  168.792208]  [<ffffffffa1794d44>] ? __kvm_read_guest_page+0x54/0x70 [kvm]
[  168.792234]  [<ffffffffa17d97d0>] ? kvm_task_switch+0x160/0x160 [kvm]
[  168.792238]  [<ffffffff812e848b>] ? debug_lockdep_rcu_enabled+0x7b/0x90
[  168.792263]  [<ffffffffa17daa07>] emulator_read_write+0xe7/0x6d0 [kvm]
[  168.792290]  [<ffffffffa183b620>] ? em_cr_write+0x230/0x230 [kvm]
[  168.792314]  [<ffffffffa17db005>] emulator_write_emulated+0x15/0x20 [kvm]
[  168.792340]  [<ffffffffa18465f8>] segmented_write+0xf8/0x130 [kvm]
[  168.792367]  [<ffffffffa1846500>] ? em_lgdt+0x20/0x20 [kvm]
[  168.792374]  [<ffffffffa14db512>] ? vmx_read_guest_seg_ar+0x42/0x1e0 [kvm_intel]
[  168.792400]  [<ffffffffa1846d82>] writeback+0x3f2/0x700 [kvm]
[  168.792424]  [<ffffffffa1846990>] ? em_sidt+0xa0/0xa0 [kvm]
[  168.792449]  [<ffffffffa185554d>] ? x86_decode_insn+0x1b3d/0x4f70 [kvm]
[  168.792474]  [<ffffffffa1859032>] x86_emulate_insn+0x572/0x3010 [kvm]
[  168.792499]  [<ffffffffa17e71dd>] x86_emulate_instruction+0x3bd/0x2110 [kvm]
[  168.792524]  [<ffffffffa17e6e20>] ? reexecute_instruction.part.110+0x2e0/0x2e0 [kvm]
[  168.792532]  [<ffffffffa14e9a81>] handle_ept_misconfig+0x61/0x460 [kvm_intel]
[  168.792539]  [<ffffffffa14e9a20>] ? handle_pause+0x450/0x450 [kvm_intel]
[  168.792546]  [<ffffffffa15130ea>] vmx_handle_exit+0xd6a/0x1ad0 [kvm_intel]
[  168.792572]  [<ffffffffa17f6a6c>] ? kvm_arch_vcpu_ioctl_run+0xbdc/0x6090 [kvm]
[  168.792597]  [<ffffffffa17f6bcd>] kvm_arch_vcpu_ioctl_run+0xd3d/0x6090 [kvm]
[  168.792621]  [<ffffffffa17f6a6c>] ? kvm_arch_vcpu_ioctl_run+0xbdc/0x6090 [kvm]
[  168.792627]  [<ffffffff8293b530>] ? __ww_mutex_lock_interruptible+0x1630/0x1630
[  168.792651]  [<ffffffffa17f5e90>] ? kvm_arch_vcpu_runnable+0x4f0/0x4f0 [kvm]
[  168.792656]  [<ffffffff811eeb30>] ? preempt_notifier_unregister+0x190/0x190
[  168.792681]  [<ffffffffa17e0447>] ? kvm_arch_vcpu_load+0x127/0x650 [kvm]
[  168.792704]  [<ffffffffa178e9a3>] kvm_vcpu_ioctl+0x553/0xda0 [kvm]
[  168.792727]  [<ffffffffa178e450>] ? vcpu_put+0x40/0x40 [kvm]
[  168.792732]  [<ffffffff8129e350>] ? debug_check_no_locks_freed+0x350/0x350
[  168.792735]  [<ffffffff82946087>] ? _raw_spin_unlock+0x27/0x40
[  168.792740]  [<ffffffff8163a943>] ? handle_mm_fault+0x1673/0x2e40
[  168.792744]  [<ffffffff8129daa8>] ? trace_hardirqs_on_caller+0x478/0x6c0
[  168.792747]  [<ffffffff8129dcfd>] ? trace_hardirqs_on+0xd/0x10
[  168.792751]  [<ffffffff812e848b>] ? debug_lockdep_rcu_enabled+0x7b/0x90
[  168.792756]  [<ffffffff81725a80>] do_vfs_ioctl+0x1b0/0x12b0
[  168.792759]  [<ffffffff817258d0>] ? ioctl_preallocate+0x210/0x210
[  168.792763]  [<ffffffff8174aef3>] ? __fget+0x273/0x4a0
[  168.792766]  [<ffffffff8174acd0>] ? __fget+0x50/0x4a0
[  168.792770]  [<ffffffff8174b1f6>] ? __fget_light+0x96/0x2b0
[  168.792773]  [<ffffffff81726bf9>] SyS_ioctl+0x79/0x90
[  168.792777]  [<ffffffff82946880>] entry_SYSCALL_64_fastpath+0x23/0xc1
[  168.792780] ================================================================================

Signed-off-by: Mike Krinkin <krinkin.m.u@gmail.com>
Reviewed-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: fix conversion of addresses to linear in 32-bit protected mode

commit 0c1d77f4ba5cc9c05a29adca3d6466cdf4969b70 upstream.

Commit e8dd2d2d641c ("Silence compiler warning in arch/x86/kvm/emulate.c",
2015-09-06) broke boot of the Hurd.  The bug is that the "default:"
case actually could modify "la", but after the patch this change is
not reflected in *linear.

The bug is visible whenever a non-zero segment base causes the linear
address to wrap around the 4GB mark.

Fixes: e8dd2d2d641cb2724ee10e76c0ad02e04289c017
Reported-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: fix missed hardware breakpoints

commit 172b2386ed16a9143d9a456aae5ec87275c61489 upstream.

Sometimes when setting a breakpoint a process doesn't stop on it.
This is because the debug registers are not loaded correctly on
VCPU load.

The following simple reproducer from Oleg Nesterov tries using debug
registers in two threads.  To see the bug, run a 2-VCPU guest with
"taskset -c 0" and run "./bp 0 1" inside the guest.

    #include <unistd.h>
    #include <signal.h>
    #include <stdlib.h>
    #include <stdio.h>
    #include <sys/wait.h>
    #include <sys/ptrace.h>
    #include <sys/user.h>
    #include <asm/debugreg.h>
    #include <assert.h>

    #define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER)

    unsigned long encode_dr7(int drnum, int enable, unsigned int type, unsigned int len)
    {
        unsigned long dr7;

        dr7 = ((len | type) & 0xf)
            << (DR_CONTROL_SHIFT + drnum * DR_CONTROL_SIZE);
        if (enable)
            dr7 |= (DR_GLOBAL_ENABLE << (drnum * DR_ENABLE_SIZE));

        return dr7;
    }

    int write_dr(int pid, int dr, unsigned long val)
    {
        return ptrace(PTRACE_POKEUSER, pid,
                offsetof (struct user, u_debugreg[dr]),
                val);
    }

    void set_bp(pid_t pid, void *addr)
    {
        unsigned long dr7;
        assert(write_dr(pid, 0, (long)addr) == 0);
        dr7 = encode_dr7(0, 1, DR_RW_EXECUTE, DR_LEN_1);
        assert(write_dr(pid, 7, dr7) == 0);
    }

    void *get_rip(int pid)
    {
        return (void*)ptrace(PTRACE_PEEKUSER, pid,
                offsetof(struct user, regs.rip), 0);
    }

    void test(int nr)
    {
        void *bp_addr = &&label + nr, *bp_hit;
        int pid;

        printf("test bp %d\n", nr);
        assert(nr < 16); // see 16 asm nops below

        pid = fork();
        if (!pid) {
            assert(ptrace(PTRACE_TRACEME, 0,0,0) == 0);
            kill(getpid(), SIGSTOP);
            for (;;) {
                label: asm (
                    "nop; nop; nop; nop;"
                    "nop; nop; nop; nop;"
                    "nop; nop; nop; nop;"
                    "nop; nop; nop; nop;"
                );
            }
        }

        assert(pid == wait(NULL));
        set_bp(pid, bp_addr);

        for (;;) {
            assert(ptrace(PTRACE_CONT, pid, 0, 0) == 0);
            assert(pid == wait(NULL));

            bp_hit = get_rip(pid);
            if (bp_hit != bp_addr)
                fprintf(stderr, "ERR!! hit wrong bp %ld != %d\n",
                    bp_hit - &&label, nr);
        }
    }

    int main(int argc, const char *argv[])
    {
        while (--argc) {
            int nr = atoi(*++argv);
            if (!fork())
                test(nr);
        }

        while (wait(NULL) > 0)
            ;
        return 0;
    }

Suggested-by: Nadav Amit <namit@cs.technion.ac.il>
Reported-by: Andrey Wagin <avagin@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: arm/arm64: vgic: Ensure bitmaps are long enough

commit 236cf17c2502007a9d2dda3c39fb0d9a6bd03cc2 upstream.

When we allocate bitmaps in vgic_vcpu_init_maps, we divide the number of
bits we need by 8 to figure out how many bytes to allocate. However,
bitmap elements are always accessed as unsigned longs, and if we didn't
happen to allocate a size such that size % sizeof(unsigned long) == 0,
bitmap accesses may go past the end of the allocation.

When using KASAN (which does byte-granular access checks), this results
in a continuous stream of BUGs whenever these bitmaps are accessed:

=============================================================================
BUG kmalloc-128 (Tainted: G    B          ): kasan: bad access detected
-----------------------------------------------------------------------------

INFO: Allocated in vgic_init.part.25+0x55c/0x990 age=7493 cpu=3 pid=1730
INFO: Slab 0xffffffbde6d5da40 objects=16 used=15 fp=0xffffffc935769700 flags=0x4000000000000080
INFO: Object 0xffffffc935769500 @offset=1280 fp=0x          (null)

Bytes b4 ffffffc9357694f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
Object ffffffc935769500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
Object ffffffc935769510: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
Object ffffffc935769520: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
Object ffffffc935769530: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
Object ffffffc935769540: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
Object ffffffc935769550: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
Object ffffffc935769560: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
Object ffffffc935769570: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
Padding ffffffc9357695b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
Padding ffffffc9357695c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
Padding ffffffc9357695d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
Padding ffffffc9357695e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
Padding ffffffc9357695f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
CPU: 3 PID: 1740 Comm: kvm-vcpu-0 Tainted: G    B           4.4.0+ #17
Hardware name: ARM Juno development board (r1) (DT)
Call trace:
[<ffffffc00008e770>] dump_backtrace+0x0/0x280
[<ffffffc00008ea04>] show_stack+0x14/0x20
[<ffffffc000726360>] dump_stack+0x100/0x188
[<ffffffc00030d324>] print_trailer+0xfc/0x168
[<ffffffc000312294>] object_err+0x3c/0x50
[<ffffffc0003140fc>] kasan_report_error+0x244/0x558
[<ffffffc000314548>] __asan_report_load8_noabort+0x48/0x50
[<ffffffc000745688>] __bitmap_or+0xc0/0xc8
[<ffffffc0000d9e44>] kvm_vgic_flush_hwstate+0x1bc/0x650
[<ffffffc0000c514c>] kvm_arch_vcpu_ioctl_run+0x2ec/0xa60
[<ffffffc0000b9a6c>] kvm_vcpu_ioctl+0x474/0xa68
[<ffffffc00036b7b0>] do_vfs_ioctl+0x5b8/0xcb0
[<ffffffc00036bf34>] SyS_ioctl+0x8c/0xa0
[<ffffffc000086cb0>] el0_svc_naked+0x24/0x28
Memory state around the buggy address:
 ffffffc935769400: 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffffffc935769480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffffffc935769500: 04 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
                   ^
 ffffffc935769580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffffffc935769600: 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================

Fix the issue by always allocating a multiple of sizeof(unsigned long),
as we do elsewhere in the vgic code.

Fixes: c1bfb577a ("arm/arm64: KVM: vgic: switch to dynamic allocation")
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: async_pf: do not warn on page allocation failures

commit d7444794a02ff655eda87e3cc54e86b940e7736f upstream.

In async_pf we try to allocate with NOWAIT to get an element quickly
or fail. This code also handle failures gracefully. Lets silence
potential page allocation failures under load.

qemu-system-s39: page allocation failure: order:0,mode:0x2200000
[...]
Call Trace:
([<00000000001146b8>] show_trace+0xf8/0x148)
[<000000000011476a>] show_stack+0x62/0xe8
[<00000000004a36b8>] dump_stack+0x70/0x98
[<0000000000272c3a>] warn_alloc_failed+0xd2/0x148
[<000000000027709e>] __alloc_pages_nodemask+0x94e/0xb38
[<00000000002cd36a>] new_slab+0x382/0x400
[<00000000002cf7ac>] ___slab_alloc.constprop.30+0x2dc/0x378
[<00000000002d03d0>] kmem_cache_alloc+0x160/0x1d0
[<0000000000133db4>] kvm_setup_async_pf+0x6c/0x198
[<000000000013dee8>] kvm_arch_vcpu_ioctl_run+0xd48/0xd58
[<000000000012fcaa>] kvm_vcpu_ioctl+0x372/0x690
[<00000000002f66f6>] do_vfs_ioctl+0x3be/0x510
[<00000000002f68ec>] SyS_ioctl+0xa4/0xb8
[<0000000000781c5e>] system_call+0xd6/0x264
[<000003ffa24fa06a>] 0x3ffa24fa06a

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

of/irq: Fix msi-map calculation for nonzero rid-base

commit 5d589d81acf974d23af98044aac56c6339d659f8 upstream.

The existing msi-map code is fine for shifting the entire RID space
upwards, but attempting finer-grained remapping reveals a bug. It turns
out that we are mistakenly treating the msi-base part as an offset, not
as a new base to remap onto, so things get squiffy when rid-base is
nonzero. Fix this, and at the same time add a sanity check against
having msi-map-mask clash with a nonzero rid-base, as that's another
thing one can easily get wrong.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Stuart Yoder <stuart.yoder@nxp.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: David Daney <david.daney@cavium.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFSv4: Fix a dentry leak on alias use

commit d9dfd8d741683347ee159d25f5b50c346a0df557 upstream.

In the case where d_add_unique() finds an appropriate alias to use it will
have already incremented the reference count.  An additional dget() to swap
the open context's dentry is unnecessary and will leak a reference.

Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Fixes: 275bb307865a3 ("NFSv4: Move dentry instantiation into the NFSv4-...")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfs: fix nfs_size_to_loff_t

commit 50ab8ec74a153eb30db26529088bc57dd700b24c upstream.

See http: //www.infradead.org/rpr.html
X-Evolution-Source: 1451162204.2173.11@leira.trondhjem.org
Content-Transfer-Encoding: 8bit
Mime-Version: 1.0

We support OFFSET_MAX just fine, so don't round down below it.  Also
switch to using min_t to make the helper more readable.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Fixes: 433c92379d9c ("NFS: Clean up nfs_size_to_loff_t()")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: fix use-after-free in dio_bio_complete

commit 7ddc971f86aa0a4cee9f6886c356a052461957ae upstream.

kasan reported the following error when i ran xfstest:

[  701.826854] ==================================================================
[  701.826864] BUG: KASAN: use-after-free in dio_bio_complete+0x41a/0x600 at addr ffff880080b95f94
[  701.826870] Read of size 4 by task loop2/3874
[  701.826879] page:ffffea000202e540 count:0 mapcount:0 mapping:          (null) index:0x0
[  701.826890] flags: 0x100000000000000()
[  701.826895] page dumped because: kasan: bad access detected
[  701.826904] CPU: 3 PID: 3874 Comm: loop2 Tainted: G    B   W    L  4.5.0-rc1-next-20160129 #83
[  701.826910] Hardware name: LENOVO 23205NG/23205NG, BIOS G2ET95WW (2.55 ) 07/09/2013
[  701.826917]  ffff88008fadf800 ffff88008fadf758 ffffffff81ca67bb 0000000041b58ab3
[  701.826941]  ffffffff830d1e74 ffffffff81ca6724 ffff88008fadf748 ffffffff8161c05c
[  701.826963]  0000000000000282 ffff88008fadf800 ffffed0010172bf2 ffffea000202e540
[  701.826987] Call Trace:
[  701.826997]  [<ffffffff81ca67bb>] dump_stack+0x97/0xdc
[  701.827005]  [<ffffffff81ca6724>] ? _atomic_dec_and_lock+0xc4/0xc4
[  701.827014]  [<ffffffff8161c05c>] ? __dump_page+0x32c/0x490
[  701.827023]  [<ffffffff816b0d03>] kasan_report_error+0x5f3/0x8b0
[  701.827033]  [<ffffffff817c302a>] ? dio_bio_complete+0x41a/0x600
[  701.827040]  [<ffffffff816b1119>] __asan_report_load4_noabort+0x59/0x80
[  701.827048]  [<ffffffff817c302a>] ? dio_bio_complete+0x41a/0x600
[  701.827053]  [<ffffffff817c302a>] dio_bio_complete+0x41a/0x600
[  701.827057]  [<ffffffff81bd19c8>] ? blk_queue_exit+0x108/0x270
[  701.827060]  [<ffffffff817c32b0>] dio_bio_end_aio+0xa0/0x4d0
[  701.827063]  [<ffffffff817c3210>] ? dio_bio_complete+0x600/0x600
[  701.827067]  [<ffffffff81bd2806>] ? blk_account_io_completion+0x316/0x5d0
[  701.827070]  [<ffffffff81bafe89>] bio_endio+0x79/0x200
[  701.827074]  [<ffffffff81bd2c9f>] blk_update_request+0x1df/0xc50
[  701.827078]  [<ffffffff81c02c27>] blk_mq_end_request+0x57/0x120
[  701.827081]  [<ffffffff81c03670>] __blk_mq_complete_request+0x310/0x590
[  701.827084]  [<ffffffff812348d8>] ? set_next_entity+0x2f8/0x2ed0
[  701.827088]  [<ffffffff8124b34d>] ? put_prev_entity+0x22d/0x2a70
[  701.827091]  [<ffffffff81c0394b>] blk_mq_complete_request+0x5b/0x80
[  701.827094]  [<ffffffff821e2a33>] loop_queue_work+0x273/0x19d0
[  701.827098]  [<ffffffff811f6578>] ? finish_task_switch+0x1c8/0x8e0
[  701.827101]  [<ffffffff8129d058>] ? trace_hardirqs_on_caller+0x18/0x6c0
[  701.827104]  [<ffffffff821e27c0>] ? lo_read_simple+0x890/0x890
[  701.827108]  [<ffffffff8129dd60>] ? debug_check_no_locks_freed+0x350/0x350
[  701.827111]  [<ffffffff811f63b0>] ? __hrtick_start+0x130/0x130
[  701.827115]  [<ffffffff82a0c8f6>] ? __schedule+0x936/0x20b0
[  701.827118]  [<ffffffff811dd6bd>] ? kthread_worker_fn+0x3ed/0x8d0
[  701.827121]  [<ffffffff811dd4ed>] ? kthread_worker_fn+0x21d/0x8d0
[  701.827125]  [<ffffffff8129d058>] ? trace_hardirqs_on_caller+0x18/0x6c0
[  701.827128]  [<ffffffff811dd57f>] kthread_worker_fn+0x2af/0x8d0
[  701.827132]  [<ffffffff811dd2d0>] ? __init_kthread_worker+0x170/0x170
[  701.827135]  [<ffffffff82a1ea46>] ? _raw_spin_unlock_irqrestore+0x36/0x60
[  701.827138]  [<ffffffff811dd2d0>] ? __init_kthread_worker+0x170/0x170
[  701.827141]  [<ffffffff811dd2d0>] ? __init_kthread_worker+0x170/0x170
[  701.827144]  [<ffffffff811dd00b>] kthread+0x24b/0x3a0
[  701.827148]  [<ffffffff811dcdc0>] ? kthread_create_on_node+0x4c0/0x4c0
[  701.827151]  [<ffffffff8129d70d>] ? trace_hardirqs_on+0xd/0x10
[  701.827155]  [<ffffffff8116d41d>] ? do_group_exit+0xdd/0x350
[  701.827158]  [<ffffffff811dcdc0>] ? kthread_create_on_node+0x4c0/0x4c0
[  701.827161]  [<ffffffff82a1f52f>] ret_from_fork+0x3f/0x70
[  701.827165]  [<ffffffff811dcdc0>] ? kthread_create_on_node+0x4c0/0x4c0
[  701.827167] Memory state around the buggy address:
[  701.827170]  ffff880080b95e80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  701.827172]  ffff880080b95f00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  701.827175] >ffff880080b95f80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  701.827177]                          ^
[  701.827179]  ffff880080b96000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  701.827182]  ffff880080b96080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  701.827183] ==================================================================

The problem is that bio_check_pages_dirty calls bio_put, so we must
not access bio fields after bio_check_pages_dirty.

Fixes: 9b81c842355ac96097ba ("block: don't access bio->bi_error after bio_put()").
Signed-off-by: Mike Krinkin <krinkin.m.u@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bio: return EINTR if copying to user space got interrupted

commit 2d99b55d378c996b9692a0c93dd25f4ed5d58934 upstream.

Commit 35dc248383bbab0a7203fca4d722875bc81ef091 introduced a check for
current->mm to see if we have a user space context and only copies data
if we do. Now if an IO gets interrupted by a signal data isn't copied
into user space any more (as we don't have a user space context) but
user space isn't notified about it.

This patch modifies the behaviour to return -EINTR from bio_uncopy_user()
to notify userland that a signal has interrupted the syscall, otherwise
it could lead to a situation where the caller may get a buffer with
no data returned.

This can be reproduced by issuing SG_IO ioctl()s in one thread while
constantly sending signals to it.

Fixes: 35dc248 [SCSI] sg: Fix user memory corruption when SG_IO is interrupted by a signal
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: i801: Adding Intel Lewisburg support for iTCO

commit 1a1503c5396eb7f2edf4b8ef6067853014478c0c upstream.

Starting from Intel Sunrisepoint (Skylake PCH) the iTCO watchdog
resources have been moved to reside under the i801 SMBus host
controller whereas previously they were under the LPC device.

This patch adds Intel lewisburg SMBus support for iTCO device.
It allows to load watchdog dynamically when the hardware is
present.

Fixes: cdc5a3110e7c ("i2c: i801: add Intel Lewisburg device IDs")
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Alexandra Yates <alexandra.yates@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

phy: core: fix wrong err handle for phy_power_on

commit b82fcabe212a11698fd4b3e604d2f81d929d22f6 upstream.

If phy_pm_runtime_get_sync failed but we already
enable regulator, current code return directly without
doing regulator_disable. This patch fix this problem
and cleanup err handle of phy_power_on to be more readable.

Fixes: 3be88125d85d ("phy: core: Support regulator ...")
Cc: Roger Quadros <rogerq@ti.com>
Cc: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

writeback: keep superblock pinned during cgroup writeback association switches

commit 5ff8eaac1636bf6deae86491f4818c4c69d1a9ac upstream.

If cgroup writeback is in use, an inode is associated with a cgroup
for writeback.  If the inode's main dirtier changes to another cgroup,
the association gets updated asynchronously.  Nothing was pinning the
superblock while such switches are in progress and superblock could go
away while async switching is pending or in progress leading to
crashes like the following.

 kernel BUG at fs/jbd2/transaction.c:319!
 invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC
 CPU: 1 PID: 29158 Comm: kworker/1:10 Not tainted 4.5.0-rc3 #51
 Hardware name: Google Google, BIOS Google 01/01/2011
 Workqueue: events inode_switch_wbs_work_fn
 task: ffff880213dbbd40 ti: ffff880209264000 task.ti: ffff880209264000
 RIP: 0010:[<ffffffff803e6922>]  [<ffffffff803e6922>] start_this_handle+0x382/0x3e0
 RSP: 0018:ffff880209267c30  EFLAGS: 00010202
 ...
 Call Trace:
  [<ffffffff803e6be4>] jbd2__journal_start+0xf4/0x190
  [<ffffffff803cfc7e>] __ext4_journal_start_sb+0x4e/0x70
  [<ffffffff803b31ec>] ext4_evict_inode+0x12c/0x3d0
  [<ffffffff8035338b>] evict+0xbb/0x190
  [<ffffffff80354190>] iput+0x130/0x190
  [<ffffffff80360223>] inode_switch_wbs_work_fn+0x343/0x4c0
  [<ffffffff80279819>] process_one_work+0x129/0x300
  [<ffffffff80279b16>] worker_thread+0x126/0x480
  [<ffffffff8027ed14>] kthread+0xc4/0xe0
  [<ffffffff809771df>] ret_from_fork+0x3f/0x70

Fix it by bumping s_active while cgroup association switching is in
flight.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-tested-by: Tahsin Erdogan <tahsin@google.com>
Link: http://lkml.kernel.org/g/CAAeU0aNCq7LGODvVGRU-oU_o-6enii5ey0p1c26D1ZzYwkDc5A@mail.gmail.com
Fixes: d10c80955265 ("writeback: implement foreign cgroup inode bdi_writeback switching")
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cgroup: make sure a parent css isn't offlined before its children

commit aa226ff4a1ce79f229c6b7a4c0a14e17fececd01 upstream.

There are three subsystem callbacks in css shutdown path -
css_offline(), css_released() and css_free().  Except for
css_released(), cgroup core didn't guarantee the order of invocation.
css_offline() or css_free() could be called on a parent css before its
children.  This behavior is unexpected and led to bugs in cpu and
memory controller.

This patch updates offline path so that a parent css is never offlined
before its children.  Each css keeps online_cnt which reaches zero iff
itself and all its children are offline and offline_css() is invoked
only after online_cnt reaches zero.

This fixes the memory controller bug and allows the fix for cpu
controller.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reported-by: Brian Christiansen <brian.o.christiansen@gmail.com>
Link: http://lkml.kernel.org/g/5698A023.9070703@de.ibm.com
Link: http://lkml.kernel.org/g/CAKB58ikDkzc8REt31WBkD99+hxNzjK4+FBmhkgS+NVrC9vjMSg@mail.gmail.com
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>