staging/rdma/hfi1: Add a schedule in send thread

When under heavy load, the send handler can run too long without allowing other
tasks to run.  Add a conditional resched to break this up.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Reset firmware instead of reloading Sbus

Reset firmware instead of reloading Sbus firmware if it's already done for this
ASIC.  To work around thermal polling problem in firmware, don't reload Sbus
firmware, instead, reset the firmware on the initialization of the second HFI.

Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Caz Yokoyama <caz.yokoyama@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: close shared context security hole

Driver does not verify userid for shared context assignments, allowing
malicious user access.

Reviewed by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jareer H Abdel-Qader <jareer.h.abdel-qader@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Add coalescing support for SDMA TX descriptors

This fixes transmit errors when the number of scatter gather elements in the
request is more that the number of per packet descriptors supported by the
hardware, allocate and coalesce the extra scatter gather elements into a single
buffer. The last descriptor is reserved and used for this coalesced buffer.

Verbs potentially need this support when transferring small data chunks
involving different memory regions.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Remove QSFP_ENABLED from HFI capability mask

The QSFP interface code has been running without issues and the flag is
never set to off. This patch removes the QSFP_ENABLED bit from HFI1_CAP.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Prevent host software lock up

If packets stop egressing the hardware link, software can lock up.

Implement a timeout for send context halt recovery.  This patch increases the
timeout for packet egress to 500 us and timer resets to zero if the packet
occupancy changes. Also we bounce the link on time out.

Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Vennila Megavannan <vennila.megavannan@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Extend the offline timeout

The latest version of the 8051 firmware will wait longer
when bringing the link down.  Extend the driver's timeout
to go with that.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Fix code to reset ASIC CSRs on FLR

The ASIC registers were not reset on FLR, and the code to
protect the ASIC block against multiple initializations by
peer HFIs did not extend to multiple ASICs in a system. This
patch addresses this gap.

Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Fix regression in send performance

The clear_ahg call is new in hfi1 vs qib.  For small messages the progress
routine always builds one and clears out the ahg state when the queue has gone
to empty which is the predominant case for small messages.

Inline the routine and avoid the call to sdma_ahg_free to mitigate the
performance impact.  Finally, move the routine to qp.h for scope reasons.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: hfi1: sdma: Use setup_timer

Use the timer API function setup_timer instead of init_timer, removing
the structure field assignments.

Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: hfi1: driver: Use setup_timer

Use the timer API function setup_timer instead of init_timer, removing
the structure field assignments.

<smpl>

@timer@
expression e1,e2,e3,fn_ptr;
@@
-init_timer(&e1);
+setup_timer(&e1, fn_ptr, e2);
... when != fn_ptr = e3
-e1.function = fn_ptr;
-e1.data = e2;

</smpl>

Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: remove unused fields from struct sm750_dev

The {x,y}LCD fields of struct sm750_dev are not used and can be removed.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: remove '#ifdef CAP_EXP*' conditionals

There are several occurencies of '#ifdef CAP_EXP<something>', spelled
differently each time. None of these is ever defined and therefore they
enclose dead code that can be removed.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: merge lynx_share into sm750_dev

Both struct lynx_share and struct sm750_dev reprsent some parts of the
SM750 graphics adapter. There is no point to keep these parts in
different structures.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: remove unused field in lynx_cursor

The lynx_share field in lynx_cursor structure is never used and can be
removed.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: fix wrong indentation

Fix wrong indentation of a line in lynxfb_set_fbinfo

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: use sm750_dev with pci_{get, set}_drvdata

Use sm750_dev as private driver data for the PCI device

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: use 'struct sm750_dev *' instead of 'void *'

Use proper 'struct sm750_dev *' type instead of 'void *'

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: replace lynx_share with sm750_dev in function calls

Use sm750_dev rather than lynx_share as parameter for hw_sm750_map,
hw_sm750_inithw and hw_sm750_initAccel functions.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: remove hw_sm750_getVMSize function

The hw_sm750_getVMSize wraps ddk750_getVMSize without any added
functionality. Call ddk750_getVMSize directly and remove
hw_sm750_getVMSize.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: replace lynx_share with sm750_dev in lynxfb_par

Use sm750_dev instead of lynx_share in the private data of the
frambuffer device.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: remove unused PROC_SPEC_* typedefs

The PROC_SPEC* typedefs are not used and can be removed

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: merge struct sm750_state into struct sm750_dev

The struct sm750_state is never used on its own. Merge it into the
struct sm750_dev.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: rename 'struct sm750_dev' variables to sm750_dev

Use consistent naming for 'struct sm750_dev' variables

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: rename struct sm750_share to sm750_dev

The struct sm750_share represents the device state and name sm750_dev
seems more appropriate.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: merge sm750_hw.h into sm750.h

There is no actual need to split type definitions and global function
declarations between lots of small headers.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: remove unused smi_indent variable

The smi_indent variable is only declared, but never used. Remove it.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: replace PADDING macro with ALIGN

The custom macro PADDING differs from standard kernel ALIGN only in
parameters order. Replace PADDING with ALIGN and remove it's definition.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: remove unused SPC_SM750 define

The SPC_SM750 define is not used and can be removed

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: replace lynx_cursor methods with function calls

The methods in lynx_cursor always use the same implementation and there is
no point to use redirection rather than direct function call.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8723au: remove unneeded forward function declarations

Remove unneeded forward function declarations.

Addresses checkpatch.pl:
WARNING: externs should be avoided in .c files

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8723au: move function type in line with function name

Move function types to be adjacent to the function names in
declarations to improve readability.

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8723au: insert correct spacing around operands

Adds required spacing around operands to improve readability.
Corrects checkpatch.pl ERROR: spaces required *

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8723au: use kernel preferred style for commenting

Reworked comments per kernel coding style to improve readability.

Corrects checkpatch.pl:
WARNING: Block comments use * on subsequent lines
WARNING: line over 80 characters

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unnecessary variables

Remove unnecessary variable that can be replaced with a single line
of code.

The semantic patch used to find this is:

// <smpl>
@@
expression ret;
@@
- if (ret) return ret;
- return 0;
+ return ret;

@@
local idexpression ret;
expression e;
@@
- ret = e;
- return ret;
+ return e;

@@
type T;
identifier i;
expression E;
@@
- T i = E;
 ... when != i

@@
type T;
identifier i;
@@
- T i;
 ... when != i
// </smpl>

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: rtl871x_mp: Remove unused function

Drop unused function that is defined but is not called anywhere.

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: Remove unnecessary variables

Remove unnecessary variables that can be replaced with a single line of code.

The semantic patch used to find this is:

// <smpl>
@@
expression ret;
@@
- if (ret) return ret;
- return 0;
+ return ret;

@@
local idexpression ret;
expression e;
@@
- ret = e;
- return ret;
+ return e;

@@
type T;
identifier i;
expression E;
@@
- T i = E;
 ... when != i

@@
type T;
identifier i;
@@
- T i;
 ... when != i
// </smpl>

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: lprocfs_status: Remove unused declaration

Remove declaration of function lprocfs_wr_timeouts from header file
since it is not used

Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: lustre_log: Remove unused functions

Remove the functions which are defined but not used anywhere

Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: mt29f_spinand: Indent to match open parenthesis

Fix alignment issues by properly indenting function parameters in
accordance to the kernel coding style. Checkpatch pointed out this
issue.

CHECK: Alignment should match open parenthesis

Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: ieee80211: Do not export static function

Remove the export symbol for static function.

The semantic patch used to find this is:

// <smpl>
@r@
type T;
identifier f;
@@

static T f (...) { ... }

@@
identifier r.f;
declarer name EXPORT_SYMBOL;
@@

-EXPORT_SYMBOL(f);
// </smpl>

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: media: omap4iss: Fixes line break

This patch fixes the checkpatch issue:

CHECK: Logical continuations should be on the previous line

Signed-off-by: Amarjargal Gundjalam <amarjargal.gundjalam@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: media: omap4iss: Matches alignment with open parenthesis

This patch fixes some of the checkpatch issue:

CHECK: Alignment should match open parenthesis

Signed-off-by: Amarjargal Gundjalam <amarjargal.gundjalam@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: media: omap4iss: Removes unnecessary blank lines

This patch fixes checkpatch issues:

CHECK: Blank lines aren't necessary before a close brace '}'
CHECK: Please don't use multiple blank lines

Signed-off-by: Amarjargal Gundjalam <amarjargal.gundjalam@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: media: omap4iss: Replaces bit shift on 1 with BIT Macro

This patch fixes some of the checkpatch issue:

CHECK: Prefer using the BIT macro

Signed-off-by: Amarjargal Gundjalam <amarjargal.gundjalam@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: media: omap4iss: Fixes misspelling

This patch fixes the checkpatch issue:

CHECK: 'splitted' may be misspelled - perhaps 'split'?

Signed-off-by: Amarjargal Gundjalam <amarjargal.gundjalam@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: media: omap4iss: Fixes NULL comparison

This patch fixes the checkpatch issue:

CHECK: Comparison to NULL could be written

Signed-off-by: Amarjargal Gundjalam <amarjargal.gundjalam@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: Do not use multiple blank lines.

Remove multiple blank lines. Problem found using checkpatch.pl
"CHECK: Please don't use multiple blank lines"

Signed-off-by: Burcin Akalin <brcnakalin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: Add space around '|'

Add space around operator '|'. Problem found using
checkpatch.pl
CHECK: spaces preferred around that '|' (ctx:VxV)

Signed-off-by: Burcin Akalin <brcnakalin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: iio: dummy: replace block comment with single line comment

Replace one block comment with a single line comment. Follow style of
previous comment and omit word channel, since it's clear the topic is
channels.

Addresses checkpatch.pl:
WARNING: Block comments use * on subsequent lines

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: iio: dummy: use uppercase descriptors for enum names

Replace lower case names in the enum dummy_scan_elements with
uppercase names and a descriptive prefix: DUMMY_INDEX_

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: iio: adis16060_core: Fix error handling

We need to check adis16060_spi_read return code to avoid feeding user
space with bogus data.
While, at it introduce out_unlock label in order to simplify locking
on error path.

Signed-off-by: Cristina Moraru <cristina.moraru09@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: iio: Remove unused variable

Remove variable that is initialized but not used.

Signed-off-by: Cristina Moraru <cristina.moraru09@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: nvec: Do not use multiple blank lines.

Remove multiple blank lines. Problem found using checkpatch.pl
"CHECK: Please don't use multiple blank lines".

Signed-off-by: Burcin Akalin <brcnakalin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: Fixes block comment style

This patch fixes the checkpatch.pl warnings:

WARNING: Block comments use * on subsequent lines
WARNING: Block comments use a trailing */ on a separate line

Signed-off-by: Amarjargal Gundjalam <amarjargal.gundjalam@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: Adds space around operators

This patch fixes the checkpatch.pl check:

CHECK: spaces preferred around that ‘’

Signed-off-by: Amarjargal Gundjalam <amarjargal.gundjalam@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: Removes unnecessary space after a cast

This patch fixes the checkpatch.pl check:

CHECK: No space is necessary after a cast

Signed-off-by: Amarjargal Gundjalam <amarjargal.gundjalam@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: Removes multiple blank lines

This patch fixes the checkpatch.pl check:

CHECK: Please don't use multiple blank lines

Signed-off-by: Amarjargal Gundjalam <amarjargal.gundjalam@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-mc: section mismatch bug fix

WARNING: drivers/staging/built-in.o(.init.text+0xdc): Section mismatch in reference from the function fsl_mc_bus_driver_init() to the function .exit.text:dprc_driver_exit()
The function __init fsl_mc_bus_driver_init() references
a function __exit dprc_driver_exit().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __exit annotation of
dprc_driver_exit() so it may be used outside an exit section.

Signed-off-by: Lijun Pan <Lijun.Pan@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: Replace LPROCFS_CLIMP_CHECK with lprocfs_climp_check

Static inline functions are preferred over macros. The function is
placed in obd_class.h instead lprocfs_status.h because obd_class.h
includes header obd.h which contains definition of struct obd_device
and in that way avoids build error: Dereferencing pointer to incomplete
type. Also remove macro LPROCFS_CLIMP_CHECK since it's no longer used.

Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: ptlrpc: Replace seq_printf() with seq_putc()

Replace seq_printf() with seq_putc() since it is more expensive than
seq_putc().

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Replace sscanf with kstrtoint

Replace single variable sscanf with specialized function
kstrtoint at the suggestion of checkpatch.pl, to fix
'WARNING: Prefer kstrto<type> to single variable sscanf'

Signed-off-by: Cristina Moraru <cristina.moraru09@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: remove unused OBD_PAGE_ALLOC/FREE and friends

The OBD_PAGE_ALLOC/FREE and related macros are not used and can be
removed

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: get rid of OBD_PAGE_ALLOC/FREE

Use alloc_page and __free_page instead

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Don't ignore error code

Error stored in rc was never reported,
so directly return it here.

Signed-off-by: Cristina Moraru <cristina.moraru09@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: Remove unused obd_cache.h file

Remove the header file obd_cache.h since it is not needed

Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: ptlrpc: Remove EXPORT_SYMBOL for sptlrpc_rule_set_expand

Since sptlrpc_rule_set_expand is static, export symbol is not needed

Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: ldlm: Do not export static function

Remove the export symbol for static function.

The semantic patch used to find this is:

// <smpl>
@r@
type T;
identifier f;
@@

static T f (...) { ... }

@@
identifier r.f;
declarer name EXPORT_SYMBOL;
@@

-EXPORT_SYMBOL(f);
// </smpl>

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: fix extreme case of comedi_nsamples_left()

`comedi_nsamples_left(s, nsamples)` returns the number of samples
remaining to complete an asynchronous command or the passed in
`nsamples`, whichever is lower.  However, it goes wrong in the extreme
case of setting the `nsamples` parameter to `UINT_MAX` when the number
of conversions per "scan" (`s->async->cmd.scan_end_arg`) is 1.  It uses
`comedi_nscans_remaining(s, nscans)` to determine the number of scans
remaining, or the parameter `nscans`, whichever is lower.  To determine
the parameter `nscans`, it divides `nsamples` by the number of
conversions per scan and adds 1.  The addition of 1 is to avoid setting
the parameter `nscans` to 0, as `comedi_nscans_remaining(s, nscans)`
treats that value specially.  However in the extreme case where
`nsamples` is `UINT_MAX` and the number of samples per scan is 1, the
addition of 1 to `nscans` overflows, producing the unwanted 0.

Fix it by refactoring new a function `__comedi_nscans_remaining(s,
nscans)` out of `comedi_nscans_remaining(s, nscans)`.  The new function
does everything except the special handling when `nscans` is 0.  Change
`comedi_nsamples_remaining()` to call the new function without adding 1
to `nscans` to avoid the overflow.

This overflow bug doesn't affect any of the current COMEDI drivers.  I
stumbled across it while changing to one of the drivers.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: wilc1000: coreconfigurator: Remove unnecessary parentheses

Parentheses around some arguments and expressions are not required and
should be removed.

Signed-off-by: Shivani Bhardwaj <shivanib134@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: wilc1000: coreconfigurator: Remove irrelevant wrapper function

Remove the function get_current_channel() and replace its calls by
get_current_channel_802_11n() as the former function's definition
involves only returning the value of latter function.
Semantic patch used to find out the issue:

@@
identifier f,g;
@@

*f(...) {
 return g(...); }

Signed-off-by: Shivani Bhardwaj <shivanib134@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: wilc1000: coreconfigurator: Drop unneeded wrapper functions

Replace the wrapper functions get_address1(), get_address2() and get_address3()
with the standard kernel function ether_addr_copy().
Semantic patch used to identify the issue:

@@
identifier f,g;
@@

*f(...) {
 g(...); }

Signed-off-by: Shivani Bhardwaj <shivanib134@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: return -ENOMEM when kmalloc failed

The driver is using -1 instead of the -ENOMEM defined macro to specify that
a buffer allocation failed.

Fixes smatch warning and similars:
drivers/staging/wilc1000/host_interface.c:1757 Handle_Key() warn:
returning -1 instead of -ENOMEM is sloppy

Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename host_int_set_WEPDefaultKeyID

This patch replaces host_int_set_WEPDefaultKeyID with
host_int_set_wep_default_key to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename u8Index in host_int_set_WEPDefaultKeyID

This patch changes second parameter of host_int_set_WEPDefaultKeyID from
u8Index to index to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix parameter name of function declaration

This patch changes struct host_if_drv of host_int_set_WEPDefaultKeyID
function declaration from hWFIDrv to hif_drv in host_interface.h
With this change, first parameter name of this function declaration and
definition has same name as hif_drv.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix return type of host_int_set_WEPDefaultKeyID

This patch changes return type of host_int_set_WEPDefaultKeyID from s32
to int. The result variable gets return value from wilc_mq_send that has
return type of int. It should be changed return type int as well as data
type of result variable.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 4.3-rc7 into staging-next

We want the other staging patches in this branch as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: wilc1000: Remove boolean comparision

This patch is to the host_interface.c file that fixes up following
warning reported by coccicheck:

WARNING: Comparison to bool

Boolean tests do not need explicit comparison to true or false

Signed-off-by: Punit Vara <punitvara@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rdma: amso1100: Drop unnecessary goto

Deletes the jump to a label on the next line when the label isn't used
anywhere else.

The semantic patch used to find this is:

// <smpl>
@r@
identifier l;
@@

-if (...) goto l;
-l:
// </smpl>

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rdma: hfi1: chip: Use setup_timer

Use the timer API function setup_timer instead of init_timer, removing
the structure field assignments.

<smpl>

@timer@
expression e1,e2,e3,fn_ptr;
@@
-init_timer(&e1);
+setup_timer(&e1, fn_ptr, e2);
... when != fn_ptr = e3
-e1.function = fn_ptr;
-e1.data = e2;

</smpl>

Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: mt29f_spinand: Prefer using the BIT macro

Replace all instances of bit shifting on 1 with the BIT(x) macro. In
addition, convert other non-1 shift operations with the equivalent
BIT(x) macro for uniformity. Issue pointed out by checkpatch.

CHECK: Prefer using the BIT macro

Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: mt29f_spinand: Replace udelay function with usleep_range

Use 'usleep_range' instead of 'udelay' to elapse time. For
spinand_reset, define the upper limit by a factor of 2 to keep the wait
short while still allowing a "good enough" range for wakeup. Define the
range 250us - 1ms for spinand_cmdfunc to provide enough leeway before
issuing spinand_reset. Checkpatch found this issue.

CHECK: usleep_range is preferred over udelay; see
Documentation/timers/timers-howto.txt

Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ipath: ipath_init_chip: Use setup_timer

Use of the timer API function setup_timer instead of init_timer, removing
the structure field assignments, and make the codeflow more readable.
The simplified sematic patch used is :-
<smpl>

@timer@
expression e1,e2,e3,fn_ptr;
@@
-init_timer(&e1);
+setup_timer(&e1, fn_ptr, e2);
... when != fn_ptr = e3
-e1.function = fn_ptr;
-e1.data = e2;

</smpl>

Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ipath: ipath_sdma: Use setup_timer

Use the timer API function setup_timer instead of init_timer, removing
the structure field assignments.

Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ipath: ipath_verbs: Use setup_timer

Use the timer API function setup_timer instead of init_timer, removing
the structure field assignments.

Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ipath: ipath_driver: Use setup_timer

Use the timer API function setup_timer instead of init_timer, removing
the structure field assignments.
The simplified semantic patch used is :-
<smpl>

@timer@
expression e1,e2,e3,fn_ptr;
@@
-init_timer(&e1);
+setup_timer(&e1, fn_ptr, e2);
... when != fn_ptr = e3
-e1.function = fn_ptr;
-e1.data = e2;

</smpl>

Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8723au: remove externs and include needed header file

Remove extern declaration and add include of header file to get same.

Addresses checkpatch.pl:
WARNING: externs should be avoided in .c files

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8723au: replace explicit NULL comparisons with !

Replace explicit NULL comparison with ! operator to simplify code.

Addresses checkpatch.pl:
WARNING: Comparisons should place the constant on the right side of the
test

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8723au: use kernel preferred style for commenting

Reworked comments per kernel coding style to improve readability.

Corrects checkpatch.pl:
WARNING: Block comments use * on subsequent lines
WARNING: line over 80 characters

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: Do not use multiple blank lines.

Remove multiple blank lines. Problem found using checkpatch.pl
"CHECK: Please don't use multiple blank lines"

Signed-off-by: Burcin Akalin <brcnakalin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: speakup: Remove multiple assignments

Remove multiple assignments by factorizing them.Problem found using
checkpatch.pl
CHECK: multiple assignments should be avoided

Signed-off-by: Burcin Akalin <brcnakalin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: Remove unnecessary braces and tab spacing

This patch removes unnecessary braces around if-else single statement
blocks and unnecessary tab space aligning

Tool used is uncrustify.

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8723au: Use put_unaligned_le32

Introduce the use of function put_unaligned_le32.

A simplified version of Coccinelle semantic patch used -

@@ identifier tmp; expression ptr; expression y,e; type T; @@

- tmp = cpu_to_le32(y);

  <+... when != tmp
- memcpy(ptr, (T)&tmp, ...);
+ put_unaligned_le32(y,ptr);
  ...+>
? tmp = e

@@ type T; identifier tmp; @@

- T tmp;
...when != tmp

Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: fix voltage settings for C-Berry28

This patch fixes some internal voltage settings for the C-Berry28 display.
The original example source files for the C-Berry28 as provided by
its vendor admatec contained six issues where a command parameter's value
didn't match its corresponding comment.
I've informed admatec about these discrepancies on 2015-08-25. In the
meantime, I've assumed the comments to be more reliable than the code,
and thus have used these values to write the initial C-Berry28 driver.
After having received a reply from admatec on 2015-10-16 that the issues
have been fixed in their example code, it has turned out that for the
voltages VCOM and AVDD, the code was indeed correct, but the comments
were wrong. This patch is meant to fix these two pending mistakes.

Signed-off-by: Dennis Menschel <menschel-d@posteo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: use init function instead of init sequence

This patch converts the default init sequence of the ST7789V
display controller into an init function, as init sequences
are considered deprecated by the maintainers of fbtft.

Signed-off-by: Dennis Menschel <menschel-d@posteo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: remove redundant set_addr_win() function

This patch removes the function set_addr_win() from fb_st7789v.c, as its
definition is redundant to the default implementation fbtft_set_addr_win()
which can be found in fbtft-core.c.

Signed-off-by: Dennis Menschel <menschel-d@posteo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: use MIPI DCS for ST7789V and C-Berry28

This patch makes use of the standard MIPI Display Command Set to remove
redundant entries from the command enum of the ST7789V display controller
and also some of the magic constants found in the init sequence of the
C-Berry28 display.

Signed-off-by: Dennis Menschel <menschel-d@posteo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8723au: add & use local variable to simplify references

Add local variable scanned_queue to rtw_createbss_cmd23a_callback()
and use it (5x) to simplify references.

Addresses checkpatch.pl WARNING: line over 80 characters

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8723au: move constant to right of comparison test

Move constant to right of comparison test to improve readability.

Addresses checkpatch.pl:
WARNING: Comparisons should place the constant on the
right side of the test

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>