Drivers: hv: utils: run polling callback always in interrupt context

[ Upstream commit 3cace4a616108539e2730f8dc21a636474395e0f ]

All channel interrupts are bound to specific VCPUs in the guest
at the point channel is created. While currently, we invoke the
polling function on the correct CPU (the CPU to which the channel
is bound to) in some cases we may run the polling function in
a non-interrupt context. This  potentially can cause an issue as the
polling function can be interrupted by the channel callback function.
Fix the issue by running the polling function on the appropriate CPU
at interrupt level. Additional details of the issue being addressed by
this patch are given below:

Currently hv_fcopy_onchannelcallback is called from interrupts and also
via the ->write function of hv_utils. Since the used global variables to
maintain state are not thread safe the state can get out of sync.
This affects the variable state as well as the channel inbound buffer.

As suggested by KY adjust hv_poll_channel to always run the given
callback on the cpu which the channel is bound to. This avoids the need
for locking because all the util services are single threaded and only
one transaction is active at any given point in time.

Additionally, remove the context variable, they will always be the same as
recv_channel.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Drivers: hv: util: Increase the timeout for util services

[ Upstream commit c0b200cfb0403740171c7527b3ac71d03f82947a ]

Util services such as KVP and FCOPY need assistance from daemon's running
in user space. Increase the timeout so we don't prematurely terminate
the transaction in the kernel. Host sets up a 60 second timeout for
all util driver transactions. The host will retry the transaction if it
times out. Set the guest timeout at 30 seconds.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lightnvm: fix missing grown bad block type

[ Upstream commit b5d4acd4cbf5029a2616084d9e9f392046d53a37 ]

The get/set bad block interface defines good block, factory bad block,
grown bad block, device reserved block, and host reserved block.
Unfortunately the grown bad block was missing, leaving the offsets wrong
for device and host side reserved blocks.

This patch adds the missing type and corrects the offsets.

Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lightnvm: fix locking and mempool in rrpc_lun_gc

[ Upstream commit b262924be03d5d2ae735bc9a4b37eb2c613f61f8 ]

This patch fix two issues in rrpc_lun_gc

1. prio_list is protected by rrpc_lun's lock not nvm_lun's, so
acquire rlun's lock instead of lun's before operate on the list.

2. we delete block from prio_list before allocating gcb, but gcb
allocation may fail, we end without putting it back to the list,
this makes the block won't get reclaimed in the future. To solve
this issue, delete block after gcb allocation.

Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lightnvm: unlock rq and free ppa_list on submission fail

[ Upstream commit c27278bddd75a3ee755c8e83c6bcc3fdd7271ef6 ]

When rrpc_write_ppalist_rq and rrpc_read_ppalist_rq succeed, we setup
rq correctly, but nvm_submit_io may afterward fail since it cannot
allocate request or nvme_nvm_command, we return error but forget to
cleanup the previous work.

Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lightnvm: add check after mempool allocation

[ Upstream commit 3bfbc6adbc5031e8a5907baa5beb27b41637742a ]

The mempool allocation might fail. Make sure to return error when it
does, instead of causing a kernel panic.

Signed-off-by: Javier Gonzalez <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lightnvm: fix incorrect nr_free_blocks stat

[ Upstream commit bdded1552085b12d23c9be76147d2e96647a098f ]

When initing bad block list in gennvm_block_bb, once we move bad block
from free_list to bb_list, we should maintain both stat info
nr_free_blocks and nr_bad_blocks. So this patch fixes to add missing
operation related to nr_free_blocks.

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lightnvm: fix bio submission issue

[ Upstream commit 3cd485b1f8e25a6534eb4c542e7eba1b944fbaaf ]

Put bio when submission fails, since we get it
before submission. And return error when backend
device driver doesn't provide a submit_io method,
thus we can end IO properly.

Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cxlflash: a couple off by one bugs

[ Upstream commit e37390bee6fe7dfbe507a9d50cdc11344b53fa08 ]

The "> MAX_CONTEXT" should be ">= MAX_CONTEXT".  Otherwise we go one
step beyond the end of the cfg->ctx_tbl[] array.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Manoj Kumar <manoj@linux.vnet.ibm.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fm10k: Cleanup exception handling for mailbox interrupt

[ Upstream commit e00e23bceba48a8f0c94fefe26948404cbd43d0a ]

This patch addresses two issues.

First is the fact that the fm10k_mbx_free_irq was assuming msix_entries was
valid and that will not always be the case.  As such we need to add a check
for if it is NULL.

Second is the fact that we weren't freeing the IRQ if the mailbox API
returned an error on trying to connect.

Signed-off-by: Alexander Duyck <aduyck@mirantis.com>
Reviewed-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fm10k: Cleanup MSI-X interrupts in case of failure

[ Upstream commit 587731e684dcf3522215194a02357d26b9bc7277 ]

If the q_vector allocation fails we should free the resources associated
with the MSI-X vector table.

Signed-off-by: Alexander Duyck <aduyck@mirantis.com>
Reviewed-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fm10k: reinitialize queuing scheme after calling init_hw

[ Upstream commit 875328e4bce696e85edcda3c4b0ec80fd525e3a3 ]

The init_hw function may fail, and in the case of VFs, it might change
the number of maximum queues available. Thus, for every flow which
checks init_hw, we need to ensure that we clear the queue scheme before,
and initialize it after. The fm10k_io_slot_reset path will end up
triggering a reset so fm10k_reinit needs this change. The
fm10k_io_error_detected and fm10k_io_resume also need to properly clear
and reinitialize the queue scheme.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fm10k: always check init_hw for errors

[ Upstream commit 1343c65f70ee1b1f968a08b30e1836a4e37116cd ]

A recent change modified init_hw in some flows the function may fail on
VF devices. For example, if a VF doesn't yet own its own queues.
However, many callers of init_hw didn't bother to check the error code.
Other callers checked but only displayed diagnostic messages without
actually handling the consequences.

Fix this by (a) always returning and preventing the netdevice from going
up, and (b) printing the diagnostic in every flow for consistency. This
should resolve an issue where VF drivers would attempt to come up
before the PF has finished assigning queues.

In addition, change the dmesg output to explicitly show the actual
function that failed, instead of combining reset_hw and init_hw into a
single check, to help for future debugging.

Fixes: 1d568b0f6424 ("fm10k: do not assume VF always has 1 queue")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fm10k: reset max_queues on init_hw_vf failure

[ Upstream commit 0e8d5b5975401c83641efd5d4595e6cdbe9e9e2f ]

VF drivers must detect how many queues are available. Previously, the
driver assumed that each VF has at minimum 1 queue. This assumption is
incorrect, since it is possible that the PF has not yet assigned the
queues to the VF by the time the VF checks. To resolve this, we added a
check first to ensure that the first queue is infact owned by the VF at
init_hw_vf time. However, the code flow did not reset hw->mac.max_queues
to 0. In some cases, such as during reinit flows, we call init_hw_vf
without clearing the previous value of hw->mac.max_queues. Due to this,
when init_hw_vf errors out, if its error code is not properly handled
the VF driver may still believe it has queues which no longer belong to
it. Fix this by clearing the hw->mac.max_queues on exit due to errors.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fm10k: Fix handling of NAPI budget when multiple queues are enabled per vector

[ Upstream commit 9f872986479b6e0543eb5c615e5f9491bb04e5c1 ]

This patch corrects an issue in which the polling routine would increase
the budget for Rx to at least 1 per queue if multiple queues were present.
This would result in Rx packets being processed when the budget was 0 which
is meant to indicate that no Rx can be handled.

Signed-off-by: Alexander Duyck <aduyck@mirantis.com>
Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fm10k: Correct MTU for jumbo frames

[ Upstream commit 8c7ee6d2cacc7794a91875ef5fd8284b4a900d8c ]

Based on hardware testing, the host interface supports up to 15368 bytes
as the maximum frame size. To determine the correct MTU, we subtract 8
for the internal switch tag, 14 for the L2 header, and 4 for the
appended FCS header, resulting in 15342 bytes of payload for our maximum
MTU on jumbo frames.

Signed-off-by: Matthew Vick <matthew.vick@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fm10k: do not assume VF always has 1 queue

[ Upstream commit 1340181fe435ccb8ca2f996b8680bd9566860619 ]

It is possible that the PF has not yet assigned resources to the VF.
Although rare, this could result in the VF attempting to read queues it
does not own and result in FUM or THI faults in the PF. To prevent this,
check queue 0 before we continue in init_hw_vf.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: xgene: Fix divider with non-zero shift value

[ Upstream commit 1382ea631ddddb634850a3795527db0feeff5aaf ]

The X-Gene clock driver missed the divider shift operation when
set the divider value.

Signed-off-by: Loc Ho <lho@apm.com>
Fixes: 308964caeebc ("clk: Add APM X-Gene SoC clock driver")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

e1000e: fix division by zero on jumbo MTUs

[ Upstream commit b77ac46bbae862dcb3f51296825c940404c69b0f ]

This patch fixes possible division by zero in receive
interrupt handler when working without adaptive interrupt
moderation.

The adaptive interrupt moderation mechanism is typically
disabled on jumbo MTUs.

Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Leonid Bloch <leonid@daynix.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

e1000: fix data race between tx_ring->next_to_clean

[ Upstream commit 9eab46b7cb8d0b0dcf014bf7b25e0e72b9e4d929 ]

e1000_clean_tx_irq cleans buffers and sets tx_ring->next_to_clean,
then e1000_xmit_frame reuses the cleaned buffers. But there are no
memory barriers when buffers gets recycled, so the recycled buffers
can be corrupted.

Use smp_store_release to update tx_ring->next_to_clean and
smp_load_acquire to read tx_ring->next_to_clean to properly
hand off buffers from e1000_clean_tx_irq to e1000_xmit_frame.

The data race was found with KernelThreadSanitizer (KTSAN).

Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ixgbe: Fix handling of NAPI budget when multiple queues are enabled per vector

[ Upstream commit 5d6002b7b822c7423e75d4651e6790bfb5642b1b ]

This patch corrects an issue in which the polling routine would increase
the budget for Rx to at least 1 per queue if multiple queues were present.
This would result in Rx packets being processed when the budget was 0 which
is meant to indicate that no Rx can be handled.

Signed-off-by: Alexander Duyck <aduyck@mirantis.com>
Tested-by: Darin Miller <darin.j.miller@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

igb: fix NULL derefs due to skipped SR-IOV enabling

[ Upstream commit be06998f96ecb93938ad2cce46c4289bf7cf45bc ]

The combined effect of commits 6423fc3416 ("igb: do not re-init SR-IOV
during probe") and ceee3450b3 ("igb: make sure SR-IOV init uses the
right number of queues") causes VFs no longer getting set up, leading
to NULL pointer dereferences due to the adapter's ->vf_data being NULL
while ->vfs_allocated_count is non-zero. The first commit not only
neglected the side effect of igb_sriov_reinit() that the second commit
tried to account for, but also that of setting IGB_FLAG_HAS_MSIX,
without which igb_enable_sriov() is effectively a no-op. Calling
igb_{,re}set_interrupt_capability() as done here seems to address this,
but I'm not sure whether this is better than sinply reverting the other
two commits.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

igb: use the correct i210 register for EEMNGCTL

[ Upstream commit 08c991297582114a6e1220f913eec91789c4eac6 ]

The i210 has two EEPROM access registers that are located in
non-standard offsets: EEARBC and EEMNGCTL. EEARBC was fixed previously
and EEMNGCTL should also be corrected.

Reported-by: Roman Hodek <roman.aud@siemens.com>
Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

igb: don't unmap NULL hw_addr

[ Upstream commit 73bf8048d7c86a20a59d427e55deb1a778e94df7 ]

I've got a startech thunderbolt dock someone loaned me, which among other
things, has the following device in it:

08:00.0 Ethernet controller: Intel Corporation I210 Gigabit Network Connection (rev 03)

This hotplugs just fine (kernel 4.2.0 plus a patch or two here):

[  863.020315] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.18-k
[  863.020316] igb: Copyright (c) 2007-2014 Intel Corporation.
[  863.028657] igb 0000:08:00.0: enabling device (0000 -> 0002)
[  863.062089] igb 0000:08:00.0: added PHC on eth0
[  863.062090] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection
[  863.062091] igb 0000:08:00.0: eth0: (PCIe:2.5Gb/s:Width x1) e8:ea:6a:00:1b:2a
[  863.062194] igb 0000:08:00.0: eth0: PBA No: 000200-000
[  863.062196] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[  863.064889] igb 0000:08:00.0 enp8s0: renamed from eth0

But disconnecting it is another story:

[ 1002.807932] igb 0000:08:00.0: removed PHC on enp8s0
[ 1002.807944] igb 0000:08:00.0 enp8s0: PCIe link lost, device now detached
[ 1003.341141] ------------[ cut here ]------------
[ 1003.341148] WARNING: CPU: 0 PID: 199 at lib/iomap.c:43 bad_io_access+0x38/0x40()
[ 1003.341149] Bad IO access at port 0x0 ()
[ 1003.342767] Modules linked in: snd_usb_audio snd_usbmidi_lib snd_rawmidi igb dca firewire_ohci firewire_core crc_itu_t rfcomm ctr ccm arc4 iwlmvm mac80211 fuse xt_CHECKSUM ipt_MASQUERADE
nf_nat_masquerade_ipv4 tun ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 xt_conntrack ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat
nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat
nf_conntrack iptable_mangle iptable_security iptable_raw iptable_filter bnep dm_mirror dm_region_hash dm_log dm_mod coretemp x86_pkg_temp_thermal intel_powerclamp kvm_intel snd_hda_codec_hdmi kvm
crct10dif_pclmul crc32_pclmul ghash_clmulni_intel drbg
[ 1003.342793]  ansi_cprng aesni_intel hp_wmi aes_x86_64 iTCO_wdt lrw iTCO_vendor_support ppdev gf128mul sparse_keymap glue_helper ablk_helper cryptd snd_hda_codec_realtek snd_hda_codec_generic
microcode snd_hda_intel uvcvideo iwlwifi snd_hda_codec videobuf2_vmalloc videobuf2_memops snd_hda_core videobuf2_core snd_hwdep btusb v4l2_common btrtl snd_seq btbcm btintel videodev cfg80211
snd_seq_device rtsx_pci_ms bluetooth pcspkr input_leds i2c_i801 media parport_pc memstick rfkill sg lpc_ich snd_pcm 8250_fintek parport joydev snd_timer snd soundcore hp_accel ie31200_edac
mei_me lis3lv02d edac_core input_polldev mei hp_wireless shpchp tpm_infineon sch_fq_codel nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables autofs4 xfs libcrc32c sd_mod sr_mod cdrom
rtsx_pci_sdmmc mmc_core crc32c_intel serio_raw rtsx_pci
[ 1003.342822]  nouveau ahci libahci mxm_wmi e1000e xhci_pci hwmon ptp drm_kms_helper pps_core xhci_hcd ttm wmi video ipv6
[ 1003.342839] CPU: 0 PID: 199 Comm: kworker/0:2 Not tainted 4.2.0-2.el7_UNSUPPORTED.x86_64 #1
[ 1003.342840] Hardware name: Hewlett-Packard HP ZBook 15 G2/2253, BIOS M70 Ver. 01.07 02/26/2015
[ 1003.342843] Workqueue: pciehp-3 pciehp_power_thread
[ 1003.342844]  ffffffff81a90655 ffff8804866d3b48 ffffffff8164763a 0000000000000000
[ 1003.342846]  ffff8804866d3b98 ffff8804866d3b88 ffffffff8107134a ffff8804866d3b88
[ 1003.342847]  ffff880486f46000 ffff88046c8a8000 ffff880486f46840 ffff88046c8a8098
[ 1003.342848] Call Trace:
[ 1003.342852]  [<ffffffff8164763a>] dump_stack+0x45/0x57
[ 1003.342855]  [<ffffffff8107134a>] warn_slowpath_common+0x8a/0xc0
[ 1003.342857]  [<ffffffff810713c6>] warn_slowpath_fmt+0x46/0x50
[ 1003.342859]  [<ffffffff8133719e>] ? pci_disable_msix+0x3e/0x50
[ 1003.342860]  [<ffffffff812f6328>] bad_io_access+0x38/0x40
[ 1003.342861]  [<ffffffff812f6567>] pci_iounmap+0x27/0x40
[ 1003.342865]  [<ffffffffa0b728d7>] igb_remove+0xc7/0x160 [igb]
[ 1003.342867]  [<ffffffff8132189f>] pci_device_remove+0x3f/0xc0
[ 1003.342869]  [<ffffffff81433426>] __device_release_driver+0x96/0x130
[ 1003.342870]  [<ffffffff814334e3>] device_release_driver+0x23/0x30
[ 1003.342871]  [<ffffffff8131b404>] pci_stop_bus_device+0x94/0xa0
[ 1003.342872]  [<ffffffff8131b3ad>] pci_stop_bus_device+0x3d/0xa0
[ 1003.342873]  [<ffffffff8131b3ad>] pci_stop_bus_device+0x3d/0xa0
[ 1003.342874]  [<ffffffff8131b516>] pci_stop_and_remove_bus_device+0x16/0x30
[ 1003.342876]  [<ffffffff81333f5b>] pciehp_unconfigure_device+0x9b/0x180
[ 1003.342877]  [<ffffffff81333a73>] pciehp_disable_slot+0x43/0xb0
[ 1003.342878]  [<ffffffff81333b6d>] pciehp_power_thread+0x8d/0xb0
[ 1003.342885]  [<ffffffff810881b2>] process_one_work+0x152/0x3d0
[ 1003.342886]  [<ffffffff8108854a>] worker_thread+0x11a/0x460
[ 1003.342887]  [<ffffffff81088430>] ? process_one_work+0x3d0/0x3d0
[ 1003.342890]  [<ffffffff8108ddd9>] kthread+0xc9/0xe0
[ 1003.342891]  [<ffffffff8108dd10>] ? kthread_create_on_node+0x180/0x180
[ 1003.342893]  [<ffffffff8164e29f>] ret_from_fork+0x3f/0x70
[ 1003.342894]  [<ffffffff8108dd10>] ? kthread_create_on_node+0x180/0x180
[ 1003.342895] ---[ end trace 65a77e06d5aa9358 ]---

Upon looking at the igb driver, I see that igb_rd32() attempted to read from
hw_addr and failed, so it set hw->hw_addr to NULL and spit out the message
in the log output above, "PCIe link lost, device now detached".

Well, now that hw_addr is NULL, the attempt to call pci_iounmap is obviously
not going to go well. As suggested by Mark Rustad, do something similar to
what ixgbe does, and save a copy of hw_addr as adapter->io_addr, so we can
still call pci_iounmap on it on teardown. Additionally, for consistency,
make the pci_iomap call assignment directly to io_addr, so map and unmap
match.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i40e: Fix Rx hash reported to the stack by our driver

[ Upstream commit 857942fd1aa15edf7356a4a4bad5369c8e70a633 ]

If the driver calls skb_set_hash even with a zero hash, that
indicates to the stack that the hash calculation is offloaded
in hardware. So the Stack doesn't do a SW hash which is required
for load balancing if the user decides to turn of rx-hashing
on our device.

This patch fixes the path so that we do not call skb_set_hash
if the feature is disabled.

Change-ID: Ic4debfa4ff91b5a72e447348a75768ed7a2d3e1b
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i40e: clean whole mac filter list

[ Upstream commit f11999987bc0b5559ab56dedc6f4ca32fab5438a ]

Clean the whole mac filter list when resetting after an intermediate
add or delete push to the firmware.  The code had evolved from using
a list from the stack to a heap allocation, but the memset() didn't
follow the change correctly.  This now cleans the whole list rather
that just part of the first element.

Change-ID: I4cd03d5a103b7407dd8556a3a231e800f2d6f2d5
Reported-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i40evf: check rings before freeing resources

[ Upstream commit fdb47ae87af537b24977a03bc69cfe1c5c55ca62 ]

If the driver gets unloaded during reset recovery, it's possible
that it will attempt to free resources when they're already free.

Add a check to make sure that the Tx and Rx rings actually exist
before dereferencing them to free resources.

Change-ID: I4d2b7e9ede49f634d421a4c5deaa5446bc755eee
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i40e: don't add zero MAC filter

[ Upstream commit b7b713a8eaf325607d37229f024ad0b9f3e7f320 ]

When VFs are created, the MAC address defaults to all zeros, indicating
to the VF driver that it should use a random MAC address. However, the
PF driver was incorrectly adding this zero MAC to the filter table,
along with the VF's randomly generated MAC address.

Check for a good address before adding the default filter. While we're
at it, make the error message a bit more useful.

Change-ID: Ia100947d68140e0f73a19ba755cbffc3e79a8fcf
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i40e: properly delete VF MAC filters

[ Upstream commit b36e9ab59b7e3a5b14bf88dc0536e6579db7b54d ]

The virtual channel interface was using incorrect semantics to remove
MAC addresses, which would leave incorrect filters active when using
VLANs. To correct this, add a new function that unconditionally removes
MAC addresses from all VLANs, and call this function when the VF
requests a MAC filter removal.

Change-ID: I69826908ae4f6c847f5bf9b32f11faa760189c74
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i40e: Fix memory leaks, sideband filter programming

[ Upstream commit a42e7a369ea2b73a554a85dea7d6243af51cd4f0 ]

This patch fixes the memory leak which would be seen otherwise when user
programs flow-director filter using ethtool (sideband filter programming).

When ethtool is used to program flow directory filter, 'raw_buf' gets
allocated and it is supposed to be freed as part of queue cleanup. But
check of 'tx_buffer->skb' was preventing it from being freed.

Change-ID: Ief4f0a1a32a653180498bf6e987c1b4342ab8923
Signed-off-by: Kiran Patil <kiran.patil@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i40e: fix: do not sleep in netdev_ops

[ Upstream commit 0e4425ed641f3eef67c892bc541949cd745a9ba9 ]

The driver was being called by VLAN, bonding, teaming operations
that expected to be able to hold locks like rcu_read_lock().

This causes the driver to be held to the requirement to not sleep,
and was found by the kernel debug options for checking sleep
inside critical section, and the locking validator.

Change-ID: Ibc68c835f5ffa8ffe0638ffe910a66fc5649a7f7
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i40e/i40evf: Fix RS bit update in Tx path and disable force WB workaround

[ Upstream commit 6a7fded776a778f728b13d83a2c9fc893580c080 ]

This patch fixes the issue of forcing WB too often causing us to not
benefit from NAPI.

Without this patch we were forcing WB/arming interrupt too often taking
away the benefits of NAPI and causing a performance impact.

With this patch we disable force WB in the clean routine for X710
and XL710 adapters. X722 adapters do not enable interrupt to force
a WB and benefit from WB_ON_ITR and hence force WB is left enabled
for those adapters.
For XL710 and X710 adapters if we have less than 4 packets pending
a software Interrupt triggered from service task will force a WB.

This patch also changes the conditions for setting RS bit as described
in code comments. This optimizes when the HW does a tail bump amd when
it does a WB. It also optimizes when we do a wmb.

Change-ID: Id831e1ae7d3e2ec3f52cd0917b41ce1d22d75d9d
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i40evf: handle many MAC filters correctly

[ Upstream commit 1418c3458118c6969d08e23aa377da7e2a7be36c ]

When a lot (many hundreds) of MAC or VLAN filters are added at one time,
we can overflow the Admin Queue buffer size with all the requests.
Unfortunately, the driver would then calculate the message size
incorrectly, causing it to be rejected by the PF. Furthermore, there was
no mechanism to trigger another request to allow for configuring the
rest of the filters that didn't fit into the first request.

To fix this, recalculate the correct buffer size when we detect the
overflow condition instead of just assuming the max buffer size. Also,
don't clear the request bit in adapter->aq_required when we have an
overflow, so that the rest of the filters can be processed later.

Change-ID: Idd7cbbc5af31315e0dcb1b10e6a02ad9817ce65c
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i40e: Workaround fix for mss < 256 issue

[ Upstream commit 4f2f017c6101ab2ba202d6059c238c15577ad38b ]

HW/NVM sets a limit of no less than 256 bytes for MSS. Stack can send as
low as 76 bytes MSS. This patch lowers the HW limit to 64 bytes to avoid
MDDs from firing and causing a reset when the MSS is lower than 256.

Change-ID: I36b500a6bb227d283c3e321a7718e0672b11fab0
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.4.20

sysfs: correctly handle read offset on PREALLOC attrs

commit 17d0774f80681020eccc9638d925a23f1fc4f671 upstream.

Attributes declared with __ATTR_PREALLOC use sysfs_kf_read() which returns
zero bytes for non-zero offset. This breaks script checkarray in mdadm tool
in debian where /bin/sh is 'dash' because its builtin 'read' reads only one
byte at a time. Script gets 'i' instead of 'idle' when reads current action
from /sys/block/$dev/md/sync_action and as a result does nothing.

This patch adds trivial implementation of partial read: generate whole
string and move required part into buffer head.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Fixes: 4ef67a8c95f3 ("sysfs/kernfs: make read requests on pre-alloc files use the buffer.")
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=787950
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (iio_hwmon) fix memory leak in name attribute

commit 5d17d3b4bbf3becb89fd48b74340a50a39736f6d upstream.

The "name" variable's memory is now freed when the device is destructed
thanks to devm function.

Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Fixes: e0f8a24e0edfd ("staging:iio::hwmon interface client driver.")
Fixes: 61bb53bcbdd86 ("hwmon: (iio_hwmon) Add support for humidity sensors")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: line6: Fix POD sysfs attributes segfault

commit b027d11263836a0cd335520175257dcb99b43757 upstream.

The commit 02fc76f6a changed base of the sysfs attributes from device to card.
The "show" callbacks dereferenced wrong objects because of this.

Fixes: 02fc76f6a7db ('ALSA: line6: Create sysfs via snd_card_add_dev_attr()')
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Andrej Krutak <dev@andree.sk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: line6: Give up on the lock while URBs are released.

commit adc8a43a6d6688272ebffa81789fa857e603dec6 upstream.

Done, because line6_stream_stop() locks and calls line6_unlink_audio_urbs(),
which in turn invokes audio_out_callback(), which tries to lock 2nd time.

Fixes:

=============================================
[ INFO: possible recursive locking detected ]
4.4.15+ #15 Not tainted
---------------------------------------------
mplayer/3591 is trying to acquire lock:
 (&(&line6pcm->out.lock)->rlock){-.-...}, at: [<bfa27655>] audio_out_callback+0x70/0x110 [snd_usb_line6]

but task is already holding lock:
 (&(&line6pcm->out.lock)->rlock){-.-...}, at: [<bfa26aad>] line6_stream_stop+0x24/0x5c [snd_usb_line6]

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(&(&line6pcm->out.lock)->rlock);
  lock(&(&line6pcm->out.lock)->rlock);

 *** DEADLOCK ***

 May be due to missing lock nesting notation

3 locks held by mplayer/3591:
 #0:  (snd_pcm_link_rwlock){.-.-..}, at: [<bf8d49a7>] snd_pcm_stream_lock+0x1e/0x40 [snd_pcm]
 #1:  (&(&substream->self_group.lock)->rlock){-.-...}, at: [<bf8d49af>] snd_pcm_stream_lock+0x26/0x40 [snd_pcm]
 #2:  (&(&line6pcm->out.lock)->rlock){-.-...}, at: [<bfa26aad>] line6_stream_stop+0x24/0x5c [snd_usb_line6]

stack backtrace:
CPU: 0 PID: 3591 Comm: mplayer Not tainted 4.4.15+ #15
Hardware name: Generic AM33XX (Flattened Device Tree)
[<c0015d85>] (unwind_backtrace) from [<c001253d>] (show_stack+0x11/0x14)
[<c001253d>] (show_stack) from [<c02f1bdf>] (dump_stack+0x8b/0xac)
[<c02f1bdf>] (dump_stack) from [<c0076f43>] (__lock_acquire+0xc8b/0x1780)
[<c0076f43>] (__lock_acquire) from [<c007810d>] (lock_acquire+0x99/0x1c0)
[<c007810d>] (lock_acquire) from [<c06171e7>] (_raw_spin_lock_irqsave+0x3f/0x4c)
[<c06171e7>] (_raw_spin_lock_irqsave) from [<bfa27655>] (audio_out_callback+0x70/0x110 [snd_usb_line6])
[<bfa27655>] (audio_out_callback [snd_usb_line6]) from [<c04294db>] (__usb_hcd_giveback_urb+0x53/0xd0)
[<c04294db>] (__usb_hcd_giveback_urb) from [<c046388d>] (musb_giveback+0x3d/0x98)
[<c046388d>] (musb_giveback) from [<c04647f5>] (musb_urb_dequeue+0x6d/0x114)
[<c04647f5>] (musb_urb_dequeue) from [<c042ac11>] (usb_hcd_unlink_urb+0x39/0x98)
[<c042ac11>] (usb_hcd_unlink_urb) from [<bfa26a87>] (line6_unlink_audio_urbs+0x6a/0x6c [snd_usb_line6])
[<bfa26a87>] (line6_unlink_audio_urbs [snd_usb_line6]) from [<bfa26acb>] (line6_stream_stop+0x42/0x5c [snd_usb_line6])
[<bfa26acb>] (line6_stream_stop [snd_usb_line6]) from [<bfa26fe7>] (snd_line6_trigger+0xb6/0xf4 [snd_usb_line6])
[<bfa26fe7>] (snd_line6_trigger [snd_usb_line6]) from [<bf8d47b7>] (snd_pcm_do_stop+0x36/0x38 [snd_pcm])
[<bf8d47b7>] (snd_pcm_do_stop [snd_pcm]) from [<bf8d462f>] (snd_pcm_action_single+0x22/0x40 [snd_pcm])
[<bf8d462f>] (snd_pcm_action_single [snd_pcm]) from [<bf8d46f9>] (snd_pcm_action+0xac/0xb0 [snd_pcm])
[<bf8d46f9>] (snd_pcm_action [snd_pcm]) from [<bf8d4b61>] (snd_pcm_drop+0x38/0x64 [snd_pcm])
[<bf8d4b61>] (snd_pcm_drop [snd_pcm]) from [<bf8d6233>] (snd_pcm_common_ioctl1+0x7fe/0xbe8 [snd_pcm])
[<bf8d6233>] (snd_pcm_common_ioctl1 [snd_pcm]) from [<bf8d6779>] (snd_pcm_playback_ioctl1+0x15c/0x51c [snd_pcm])
[<bf8d6779>] (snd_pcm_playback_ioctl1 [snd_pcm]) from [<bf8d6b59>] (snd_pcm_playback_ioctl+0x20/0x28 [snd_pcm])
[<bf8d6b59>] (snd_pcm_playback_ioctl [snd_pcm]) from [<c016714b>] (do_vfs_ioctl+0x3af/0x5c8)

Fixes: 63e20df1e5b2 ('ALSA: line6: Reorganize PCM stream handling')
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Andrej Krutak <dev@andree.sk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: line6: Remove double line6_pcm_release() after failed acquire.

commit 7e4379eae0e31994ea645db1d13006ea8e5ce539 upstream.

If there's an error, pcm is released in line6_pcm_acquire already.

Fixes: 247d95ee6dd2 ('ALSA: line6: Handle error from line6_pcm_acquire()')
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Andrej Krutak <dev@andree.sk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI / SRAT: fix SRAT parsing order with both LAPIC and X2APIC present

commit 702b07fcc9b264c9afd372676bbdd50a762dcde0 upstream.

SRAT maps APIC ID to proximity domains ids (PXM). Mapping from PXM to
NUMA node ids is based on order of entries in SRAT table.
SRAT table has just LAPIC entires or mix of LAPIC and X2APIC entries.
As long as there are only LAPIC entires, mapping from proximity domain
id to NUMA node id is as assumed by BIOS. However, once APIC entries are
mixed, X2APIC entries would be first mapped which causes unexpected NUMA
node mapping.

To fix that, change parsing to check each entry against both LAPIC and
X2APIC so mapping is in the SRAT/PXM order.

This is supplemental change to the fix made by commit d81056b5278
(Handle apic/x2apic entries in MADT in correct order) and using the
mechanism introduced by 9b3fedd (ACPI / tables: Add acpi_subtable_proc
to ACPI table parsers).

Fixes: d81056b5278 (Handle apic/x2apic entries in MADT in correct order)
Signed-off-by: Lukasz Anaczkowski <lukasz.anaczkowski@intel.com>
[ rjw : Subject & changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI / sysfs: fix error code in get_status()

commit f18ebc211e259d4f591e39e74b2aa2de226c9a1d upstream.

The problem with ornamental, do-nothing gotos is that they lead to
"forgot to set the error code" bugs.  We should be returning -EINVAL
here but we don't.  It leads to an uninitalized variable in
counter_show():

    drivers/acpi/sysfs.c:603 counter_show()
    error: uninitialized symbol 'status'.

Fixes: 1c8fce27e275 (ACPI: introduce drivers/acpi/sysfs.c)
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI / drivers: replace acpi_probe_lock spinlock with mutex

commit 5331d9cab32ef640b4cd38a43b0858874fbb7168 upstream.

Commit e647b532275b ("ACPI: Add early device probing infrastructure")
introduced code that allows inserting driver specific
struct acpi_probe_entry probe entries into ACPI linker sections
(one per-subsystem, eg irqchip, clocksource) that are then walked
to retrieve the data and function hooks required to probe the
respective kernel components.

Probing for all entries in a section is triggered through
the __acpi_probe_device_table() function, that in turn, according
to the table ID a given probe entry reports parses the table
with the function retrieved from the respective section structures
(ie struct acpi_probe_entry). Owing to the current ACPI table
parsing implementation, the __acpi_probe_device_table() function
has to share global variables with the acpi_match_madt() function, so
in order to guarantee mutual exclusion locking is required
between the two functions.

Current kernel code implements the locking through the acpi_probe_lock
spinlock; this has the side effect of requiring all code called
within the lock (ie struct acpi_probe_entry.probe_{table/subtbl} hooks)
not to sleep.

However, kernel subsystems that make use of the early probing
infrastructure are relying on kernel APIs that may sleep (eg
irq_domain_alloc_fwnode(), among others) in the function calls
pointed at by struct acpi_probe_entry.{probe_table/subtbl} entries
(eg gic_v2_acpi_init()), which is a bug.

Since __acpi_probe_device_table() is called from context
that is allowed to sleep the acpi_probe_lock spinlock can be replaced
with a mutex; this fixes the issue whilst still guaranteeing
mutual exclusion.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Fixes: e647b532275b (ACPI: Add early device probing infrastructure)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI / drivers: fix typo in ACPI_DECLARE_PROBE_ENTRY macro

commit 3feab13c919f99b0a17d0ca22ae00cf90f5d3fd1 upstream.

When the ACPI_DECLARE_PROBE_ENTRY macro was added in
commit e647b532275b ("ACPI: Add early device probing infrastructure"),
a stub macro adding an unused entry was added for the !CONFIG_ACPI
Kconfig option case to make sure kernel code making use of the
macro did not require to be guarded within CONFIG_ACPI in order to
be compiled.

The stub macro was never used since all kernel code that defines
ACPI_DECLARE_PROBE_ENTRY entries is currently guarded within
CONFIG_ACPI; it contains a typo that should be nonetheless fixed.

Fix the typo in the stub (ie !CONFIG_ACPI) ACPI_DECLARE_PROBE_ENTRY()
macro so that it can actually be used if needed.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Fixes: e647b532275b (ACPI: Add early device probing infrastructure)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: fix wrong insn_write handler

commit 5ca05345c56cb979e1a25ab6146437002f95cac8 upstream.

For counter subdevices, the `s->insn_write` handler is being set to the
wrong function, `ni_tio_insn_read()`.  It should be
`ni_tio_insn_write()`.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reported-by: Éric Piel <piel@delmic.com>
Fixes: 10f74377eec3 ("staging: comedi: ni_tio: make ni_tio_winsn() a
  proper comedi (*insn_write)"
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: fix AO inttrig backwards compatibility

commit f0f4b0cc3a8cffd983f5940d46cd0227f3f5710a upstream.

Commit ebb657babfa9 ("staging: comedi: ni_mio_common: clarify the
cmd->start_arg validation and use") introduced a backwards compatibility
issue in the use of asynchronous commands on the AO subdevice when
`start_src` is `TRIG_EXT`.  Valid values for `start_src` are `TRIG_INT`
(for internal, software trigger), and `TRIG_EXT` (for external trigger).
When set to `TRIG_EXT`.  In both cases, the driver relies on an
internal, software trigger to set things up (allowing the user
application to write sufficient samples to the data buffer before the
trigger), so it acts as a software "pre-trigger" in the `TRIG_EXT` case.
The software trigger is handled by `ni_ao_inttrig()`.

Prior to the above change, when `start_src` was `TRIG_INT`, `start_arg`
was required to be 0, and `ni_ao_inttrig()` checked that the software
trigger number was also 0.  After the above change, when `start_src` was
`TRIG_INT`, any value was allowed for `start_arg`, and `ni_ao_inttrig()`
checked that the software trigger number matched this `start_arg` value.
The backwards compatibility issue is that the internal trigger number
now has to match `start_arg` when `start_src` is `TRIG_EXT` when it
previously had to be 0.

Fix the backwards compatibility issue in `ni_ao_inttrig()` by always
allowing software trigger number 0 when `start_src` is something other
than `TRIG_INT`.

Thanks to Spencer Olson for reporting the issue.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reported-by: Spencer Olson <olsonse@umich.edu>
Fixes: ebb657babfa9 ("staging: comedi: ni_mio_common: clarify the cmd->start_arg validation and use")
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_test: fix timer race conditions

commit 403fe7f34e3327ddac2e06a15e76a293d613381e upstream.

Commit 73e0e4dfed4c ("staging: comedi: comedi_test: fix timer lock-up")
fixed a lock-up in the timer routine `waveform_ai_timer()` (which was
called `waveform_ai_interrupt()` at the time) caused by
commit 240512474424 ("staging: comedi: comedi_test: use
comedi_handle_events()").  However, it introduced a race condition that
can result in the timer routine misbehaving, such as accessing freed
memory or dereferencing a NULL pointer.

73e0... changed the timer routine to do nothing unless a
`WAVEFORM_AI_RUNNING` flag was set, and changed `waveform_ai_cancel()`
to clear the flag and replace a call to `del_timer_sync()` with a call
to `del_timer()`.  `waveform_ai_cancel()` may be called from the timer
routine itself (via `comedi_handle_events()`), or from `do_cancel()`.
(`do_cancel()` is called as a result of a file operation (usually a
`COMEDI_CANCEL` ioctl command, or a release), or during device removal.)
When called from `do_cancel()`, the call to `waveform_ai_cancel()` is
followed by a call to `do_become_nonbusy()`, which frees up stuff for
the current asynchronous command under the assumption that it is now
safe to do so.  The race condition occurs when the timer routine
`waveform_ai_timer()` checks the `WAVEFORM_AI_RUNNING` flag just before
it is cleared by `waveform_ai_cancel()`, and is still running during the
call to `do_become_nonbusy()`.  In particular, it can lead to a NULL
pointer dereference:

BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffffc0c63add>] waveform_ai_timer+0x17d/0x290 [comedi_test]

That corresponds to this line in `waveform_ai_timer()`:

unsigned int chanspec = cmd->chanlist[async->cur_chan];

but `do_become_nonbusy()` frees `cmd->chanlist` and sets it to `NULL`.

Fix the race by calling `del_timer_sync()` instead of `del_timer()` in
`waveform_ai_cancel()` when not in an interrupt context.  The only time
`waveform_ai_cancel()` is called in an interrupt context is when it is
called from the timer routine itself, via `comedi_handle_events()`.

There is no longer any need for the `WAVEFORM_AI_RUNNING` flag, so get
rid of it.

The bug was copied from the AI subdevice to the AO when support for
commands on the AO subdevice was added by commit 0cf55bbef2f9 ("staging:
comedi: comedi_test: implement commands on AO subdevice").  That
involves the timer routine `waveform_ao_timer()`, the comedi "cancel"
routine `waveform_ao_cancel()`, and the flag `WAVEFORM_AO_RUNNING`.  Fix
it in the same way as for the AI subdevice.

Fixes: 73e0e4dfed4c ("staging: comedi: comedi_test: fix timer lock-up")
Fixes: 0cf55bbef2f9 ("staging: comedi: comedi_test: implement commands
 on AO subdevice")
Reported-by: Éric Piel <piel@delmic.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Éric Piel <piel@delmic.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: daqboard2000: bug fix board type matching code

commit 80e162ee9b31d77d851b10f8c5299132be1e120f upstream.

`daqboard2000_find_boardinfo()` is supposed to check if the
DaqBoard/2000 series model is supported, based on the PCI subvendor and
subdevice ID.  The current code is wrong as it is comparing the PCI
device's subdevice ID to an expected, fixed value for the subvendor ID.
It should be comparing the PCI device's subvendor ID to this fixed
value.  Correct it.

Fixes: 7e8401b23e7f ("staging: comedi: daqboard2000: add back subsystem_device check")
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: option: add WeTelecom 0x6802 and 0x6803 products

commit 40d9c32525cba79130612650b1abc47c0c0f19a8 upstream.

These product IDs are listed in Windows driver.
0x6803 corresponds to WeTelecom WM-D300.
0x6802 name is unknown.

Signed-off-by: Aleksandr Makarov <aleksandr.o.makarov@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: option: add WeTelecom WM-D200

commit 6695593e4a7659db49ac6eca98c164f7b5589f72 upstream.

Add support for WeTelecom WM-D200.

T:  Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  4 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=22de ProdID=6801 Rev=00.00
S:  Manufacturer=WeTelecom Incorporated
S:  Product=WeTelecom Mobile Products
C:  #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage

Signed-off-by: Aleksandr Makarov <aleksandr.o.makarov@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: mos7840: fix non-atomic allocation in write path

commit 3b7c7e52efda0d4640060de747768360ba70a7c0 upstream.

There is an allocation with GFP_KERNEL flag in mos7840_write(),
while it may be called from interrupt context.

Follow-up for commit 191252837626 ("USB: kobil_sct: fix non-atomic
allocation in write path")

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: mos7720: fix non-atomic allocation in write path

commit 5a5a1d614287a647b36dff3f40c2b0ceabbc83ec upstream.

There is an allocation with GFP_KERNEL flag in mos7720_write(),
while it may be called from interrupt context.

Follow-up for commit 191252837626 ("USB: kobil_sct: fix non-atomic
allocation in write path")

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: fix typo in wMaxPacketSize validation

commit 6c73358c83ce870c0cf32413e5cadb3b9a39c606 upstream.

The maximum value allowed for wMaxPacketSize of a high-speed interrupt
endpoint is 1024 bytes, not 1023.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Fixes: aed9d65ac327 ("USB: validate wMaxPacketValue entries in endpoint descriptors")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: chipidea: udc: don't touch DP when controller is in host mode

commit c4e94174983a86c935be1537a73e496b778b0287 upstream.

When the controller is configured to be dual role and it's in host mode,
if bind udc and gadgt driver, those gadget operations will do gadget
disconnect and finally pull down DP line, which will break host function.

Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: avoid left shift by -1

commit 53e5f36fbd2453ad69a3369a1db62dc06c30a4aa upstream.

UBSAN complains about a left shift by -1 in proc_do_submiturb().  This
can occur when an URB is submitted for a bulk or control endpoint on
a high-speed device, since the code doesn't bother to check the
endpoint type; normally only interrupt or isochronous endpoints have
a nonzero bInterval value.

Aside from the fact that the operation is illegal, it shouldn't matter
because the result isn't used.  Still, in theory it could cause a
hardware exception or other problem, so we should work around it.
This patch avoids doing the left shift unless the shift amount is >= 0.

The same piece of code has another problem.  When checking the device
speed (the exponential encoding for interrupt endpoints is used only
by high-speed or faster devices), we need to look for speed >=
USB_SPEED_SUPER as well as speed == USB_SPEED HIGH.  The patch adds
this check.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Vittorio Zecca <zeccav@gmail.com>
Tested-by: Vittorio Zecca <zeccav@gmail.com>
Suggested-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: usb-dmac: check CHCR.DE bit in usb_dmac_isr_channel()

commit 626d2f07de89bf6be3d7301524d0ab3375b81b9c upstream.

The USB-DMAC's interruption happens even if the CHCR.DE is not set to 1
because CHCR.NULLE is set to 1. So, this driver should call
usb_dmac_isr_transfer_end() if the DE bit is set to 1 only. Otherwise,
the desc is possible to be NULL in the usb_dmac_isr_transfer_end().

Fixes: 0c1c8ff32fa2 ("dmaengine: usb-dmac: Add Renesas USB DMA Controller (USB-DMAC) driver)
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: qat - fix aes-xts key sizes

commit 10bb087ce381c812cd81a65ffd5e6f83e6399291 upstream.

Increase value of supported key sizes for qat_aes_xts.
aes-xts keys consists of keys of equal size concatenated.

Fixes: def14bfaf30d ("crypto: qat - add support for ctr(aes) and xts(aes)")
Reported-by: Wenqian Yu <wenqian.yu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: nx - off by one bug in nx_of_update_msc()

commit e514cc0a492a3f39ef71b31590a7ef67537ee04b upstream.

The props->ap[] array is defined like this:

struct alg_props ap[NX_MAX_FC][NX_MAX_MODE][3];

So we can see that if msc->fc and msc->mode are == to NX_MAX_FC or
NX_MAX_MODE then we're off by one.

Fixes: ae0222b7289d ('powerpc/crypto: nx driver code supporting nx encryption')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: i8042 - set up shared ps2_cmd_mutex for AUX ports

commit 47af45d684b5f3ae000ad448db02ce4f13f73273 upstream.

The commit 4097461897df ("Input: i8042 - break load dependency ...")
correctly set up ps2_cmd_mutex pointer for the KBD port but forgot to do
the same for AUX port(s), which results in communication on KBD and AUX
ports to clash with each other.

Fixes: 4097461897df ("Input: i8042 - break load dependency ...")
Reported-by: Bruno Wolff III <bruno@wolff.to>
Tested-by: Bruno Wolff III <bruno@wolff.to>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: i8042 - break load dependency between atkbd/psmouse and i8042

commit 4097461897df91041382ff6fcd2bfa7ee6b2448c upstream.

As explained in 1407814240-4275-1-git-send-email-decui@microsoft.com we
have a hard load dependency between i8042 and atkbd which prevents
keyboard from working on Gen2 Hyper-V VMs.

> hyperv_keyboard invokes serio_interrupt(), which needs a valid serio
> driver like atkbd.c.  atkbd.c depends on libps2.c because it invokes
> ps2_command().  libps2.c depends on i8042.c because it invokes
> i8042_check_port_owner().  As a result, hyperv_keyboard actually
> depends on i8042.c.
>
> For a Generation 2 Hyper-V VM (meaning no i8042 device emulated), if a
> Linux VM (like Arch Linux) happens to configure CONFIG_SERIO_I8042=m
> rather than =y, atkbd.ko can't load because i8042.ko can't load(due to
> no i8042 device emulated) and finally hyperv_keyboard can't work and
> the user can't input: https://bugs.archlinux.org/task/39820
> (Ubuntu/RHEL/SUSE aren't affected since they use CONFIG_SERIO_I8042=y)

To break the dependency we move away from using i8042_check_port_owner()
and instead allow serio port owner specify a mutex that clients should use
to serialize PS/2 command stream.

Reported-by: Mark Laws <mdl@60hz.org>
Tested-by: Mark Laws <mdl@60hz.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: tegra-kbc - fix inverted reset logic

commit fae16989be77b09bab86c79233e4b511ea769cea upstream.

Commit fe6b0dfaba68 ("Input: tegra-kbc - use reset framework")
accidentally converted _deassert to _assert, so there is no code
to wake up this hardware.

Fixes: fe6b0dfaba68 ("Input: tegra-kbc - use reset framework")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: properly track when rescan worker is running

commit d2c609b834d62f1e91f1635a27dca29f7806d3d6 upstream.

The qgroup_flags field is overloaded such that it reflects the on-disk
status of qgroups and the runtime state.  The BTRFS_QGROUP_STATUS_FLAG_RESCAN
flag is used to indicate that a rescan operation is in progress, but if
the file system is unmounted while a rescan is running, the rescan
operation is paused.  If the file system is then mounted read-only,
the flag will still be present but the rescan operation will not have
been resumed.  When we go to umount, btrfs_qgroup_wait_for_completion
will see the flag and interpret it to mean that the rescan worker is
still running and will wait for a completion that will never come.

This patch uses a separate flag to indicate when the worker is
running.  The locking and state surrounding the qgroup rescan worker
needs a lot of attention beyond this patch but this is enough to
avoid a hung umount.

Signed-off-by; Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Chris Mason <clm@fb.com>

btrfs: waiting on qgroup rescan should not always be interruptible

commit d06f23d6a947c9abae41dc46be69a56baf36f436 upstream.

We wait on qgroup rescan completion in three places: file system
shutdown, the quota disable ioctl, and the rescan wait ioctl.  If the
user sends a signal while we're waiting, we continue happily along.  This
is expected behavior for the rescan wait ioctl.  It's racy in the shutdown
path but mostly works due to other unrelated synchronization points.
In the quota disable path, it Oopses the kernel pretty much immediately.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs/seq_file: fix out-of-bounds read

commit 088bf2ff5d12e2e32ee52a4024fec26e582f44d3 upstream.

seq_read() is a nasty piece of work, not to mention buggy.

It has (I think) an old bug which allows unprivileged userspace to read
beyond the end of m->buf.

I was getting these:

    BUG: KASAN: slab-out-of-bounds in seq_read+0xcd2/0x1480 at addr ffff880116889880
    Read of size 2713 by task trinity-c2/1329
    CPU: 2 PID: 1329 Comm: trinity-c2 Not tainted 4.8.0-rc1+ #96
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
    Call Trace:
      kasan_object_err+0x1c/0x80
      kasan_report_error+0x2cb/0x7e0
      kasan_report+0x4e/0x80
      check_memory_region+0x13e/0x1a0
      kasan_check_read+0x11/0x20
      seq_read+0xcd2/0x1480
      proc_reg_read+0x10b/0x260
      do_loop_readv_writev.part.5+0x140/0x2c0
      do_readv_writev+0x589/0x860
      vfs_readv+0x7b/0xd0
      do_readv+0xd8/0x2c0
      SyS_readv+0xb/0x10
      do_syscall_64+0x1b3/0x4b0
      entry_SYSCALL64_slow_path+0x25/0x25
    Object at ffff880116889100, in cache kmalloc-4096 size: 4096
    Allocated:
    PID = 1329
      save_stack_trace+0x26/0x80
      save_stack+0x46/0xd0
      kasan_kmalloc+0xad/0xe0
      __kmalloc+0x1aa/0x4a0
      seq_buf_alloc+0x35/0x40
      seq_read+0x7d8/0x1480
      proc_reg_read+0x10b/0x260
      do_loop_readv_writev.part.5+0x140/0x2c0
      do_readv_writev+0x589/0x860
      vfs_readv+0x7b/0xd0
      do_readv+0xd8/0x2c0
      SyS_readv+0xb/0x10
      do_syscall_64+0x1b3/0x4b0
      return_from_SYSCALL_64+0x0/0x6a
    Freed:
    PID = 0
    (stack is not available)
    Memory state around the buggy address:
     ffff88011688a000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
     ffff88011688a080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    >ffff88011688a100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
       ^
     ffff88011688a180: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
     ffff88011688a200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
    ==================================================================
    Disabling lock debugging due to kernel taint

This seems to be the same thing that Dave Jones was seeing here:

  https://lkml.org/lkml/2016/8/12/334

There are multiple issues here:

  1) If we enter the function with a non-empty buffer, there is an attempt
     to flush it. But it was not clearing m->from after doing so, which
     means that if we try to do this flush twice in a row without any call
     to traverse() in between, we are going to be reading from the wrong
     place -- the splat above, fixed by this patch.

  2) If there's a short write to userspace because of page faults, the
     buffer may already contain multiple lines (i.e. pos has advanced by
     more than 1), but we don't save the progress that was made so the
     next call will output what we've already returned previously. Since
     that is a much less serious issue (and I have a headache after
     staring at seq_read() for the past 8 hours), I'll leave that for now.

Link: http://lkml.kernel.org/r/1471447270-32093-1-git-send-email-vegard.nossum@oracle.com
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpio: Fix OF build problem on UM

commit 2527ecc9195e9c66252af24c4689e8a67cd4ccb9 upstream.

The UserMode (UM) Linux build was failing in gpiolib-of as it requires
ioremap()/iounmap() to exist, which is absent from UM. The non-existence
of IO memory is negatively defined as CONFIG_NO_IOMEM which means we
need to depend on HAS_IOMEM.

Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: renesas_usbhs: gadget: fix return value check in usbhs_mod_gadget_probe()

commit 3295235fd70ed6d594aadee8c892a14f6a4b2d2e upstream.

In case of error, the function usb_get_phy() returns ERR_PTR() and never
returns NULL. The NULL test in the return value check should be replaced
with IS_ERR().

Fixes: b5a2875605ca ("usb: renesas_usbhs: Allow an OTG PHY driver to
provide VBUS")
Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

megaraid_sas: Fix probing cards without io port

commit e7f851684efb3377e9c93aca7fae6e76212e5680 upstream.

Found one megaraid_sas HBA probe fails,

[  187.235190] scsi host2: Avago SAS based MegaRAID driver
[  191.112365] megaraid_sas 0000:89:00.0: BAR 0: can't reserve [io  0x0000-0x00ff]
[  191.120548] megaraid_sas 0000:89:00.0: IO memory region busy!

and the card has resource like,
[  125.097714] pci 0000:89:00.0: [1000:005d] type 00 class 0x010400
[  125.104446] pci 0000:89:00.0: reg 0x10: [io  0x0000-0x00ff]
[  125.110686] pci 0000:89:00.0: reg 0x14: [mem 0xce400000-0xce40ffff 64bit]
[  125.118286] pci 0000:89:00.0: reg 0x1c: [mem 0xce300000-0xce3fffff 64bit]
[  125.125891] pci 0000:89:00.0: reg 0x30: [mem 0xce200000-0xce2fffff pref]

that does not io port resource allocated from BIOS, and kernel can not
assign one as io port shortage.

The driver is only looking for MEM, and should not fail.

It turns out megasas_init_fw() etc are using bar index as mask.  index 1
is used as mask 1, so that pci_request_selected_regions() is trying to
request BAR0 instead of BAR1.

Fix all related reference.

Fixes: b6d5d8808b4c ("megaraid_sas: Use lowest memory bar for SR-IOV VF support")
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mpt3sas: Fix resume on WarpDrive flash cards

commit ce7c6c9e1d997a2670aead3a7b87f4df32c11118 upstream.

mpt3sas crashes on resume after suspend with WarpDrive flash cards.  The
reply_post_host_index array is not set back up after the resume, and we
deference a stale pointer in _base_interrupt().

[   47.309711] BUG: unable to handle kernel paging request at ffffc90001f8006c
[   47.318289] IP: [<ffffffffc00863ef>] _base_interrupt+0x49f/0xa30 [mpt3sas]
[   47.326749] PGD 41ccaa067 PUD 41ccab067 PMD 3466c067 PTE 0
[   47.333848] Oops: 0002 [#1] SMP
...
[   47.452708] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.7.0 #6
[   47.460506] Hardware name: Dell Inc. OptiPlex 990/06D7TR, BIOS A18 09/24/2013
[   47.469629] task: ffffffff81c0d500 ti: ffffffff81c00000 task.ti: ffffffff81c00000
[   47.479112] RIP: 0010:[<ffffffffc00863ef>]  [<ffffffffc00863ef>] _base_interrupt+0x49f/0xa30 [mpt3sas]
[   47.490466] RSP: 0018:ffff88041d203e30  EFLAGS: 00010002
[   47.497801] RAX: 0000000000000001 RBX: ffff880033f4c000 RCX: 0000000000000001
[   47.506973] RDX: ffffc90001f8006c RSI: 0000000000000082 RDI: 0000000000000082
[   47.516141] RBP: ffff88041d203eb0 R08: ffff8804118e2820 R09: 0000000000000001
[   47.525300] R10: 0000000000000001 R11: 00000000100c0000 R12: 0000000000000000
[   47.534457] R13: ffff880412c487e0 R14: ffff88041a8987d8 R15: 0000000000000001
[   47.543632] FS:  0000000000000000(0000) GS:ffff88041d200000(0000) knlGS:0000000000000000
[   47.553796] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   47.561632] CR2: ffffc90001f8006c CR3: 0000000001c06000 CR4: 00000000000406f0
[   47.570883] Stack:
[   47.575015]  000000001d211228 ffff88041d2100c0 ffff8800c47d8130 0000000000000100
[   47.584625]  ffff8804100c0000 100c000000000000 ffff88041a8992a0 ffff88041a8987f8
[   47.594230]  ffff88041d203e00 ffffffff81111e55 000000000000038c ffff880414ad4280
[   47.603862] Call Trace:
[   47.608474]  <IRQ>
[   47.610413]  [<ffffffff81111e55>] ? call_timer_fn+0x35/0x120
[   47.620539]  [<ffffffff81100a1f>] handle_irq_event_percpu+0x7f/0x1c0
[   47.629061]  [<ffffffff81100b8c>] handle_irq_event+0x2c/0x50
[   47.636859]  [<ffffffff81103fff>] handle_edge_irq+0x6f/0x130
[   47.644654]  [<ffffffff8102fbf3>] handle_irq+0x73/0x120
[   47.652011]  [<ffffffff810c6ada>] ? atomic_notifier_call_chain+0x1a/0x20
[   47.660854]  [<ffffffff817e374b>] do_IRQ+0x4b/0xd0
[   47.667777]  [<ffffffff817e160c>] common_interrupt+0x8c/0x8c
[   47.675635]  <EOI>

Move the reply_post_host_index array setup into
mpt3sas_base_map_resources(), which is also in the resume path.

Signed-off-by: Greg Edwards <gedwards@fireweed.org>
Acked-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cdc-acm: fix wrong pipe type on rx interrupt xfers

commit add125054b8727103631dce116361668436ef6a7 upstream.

This fixes the "BOGUS urb xfer" warning logged by usb_submit_urb().

Signed-off-by: Gavin Li <git@thegavinli.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: cros-ec-tunnel: Fix usage of cros_ec_cmd_xfer()

commit 4d01d88019261d05ec3bff5f1a6013393faa3b9e upstream.

cros_ec_cmd_xfer returns success status if the command transport
completes successfully, but the execution result is incorrectly ignored.
In many cases, the execution result is assumed to be successful, leading
to ignored errors and operating on uninitialized data.

We've recently introduced the cros_ec_cmd_xfer_status() helper to avoid these
problems. Let's use it.

[Regarding the 'Fixes' tag; there is significant refactoring since the driver's
introduction, but the underlying logical error exists throughout I believe]

Fixes: 9d230c9e4f4e ("i2c: ChromeOS EC tunnel driver")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mfd: cros_ec: Add cros_ec_cmd_xfer_status() helper

commit 9798ac6d32c1a32d6d92d853ff507d2d39c4300c upstream.

So that callers of cros_ec_cmd_xfer() don't have to repeat boilerplate
code when checking for errors from the EC side.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

aacraid: Check size values after double-fetch from user

commit fa00c437eef8dc2e7b25f8cd868cfa405fcc2bb3 upstream.

In aacraid's ioctl_send_fib() we do two fetches from userspace, one the
get the fib header's size and one for the fib itself. Later we use the
size field from the second fetch to further process the fib. If for some
reason the size from the second fetch is different than from the first
fix, we may encounter an out-of- bounds access in aac_fib_send(). We
also check the sender size to insure it is not out of bounds. This was
reported in https://bugzilla.kernel.org/show_bug.cgi?id=116751 and was
assigned CVE-2016-6480.

Reported-by: Pengfei Wang <wpengfeinudt@gmail.com>
Fixes: 7c00ffa31 '[SCSI] 2.6 aacraid: Variable FIB size (updated patch)'
Signed-off-by: Dave Carroll <david.carroll@microsemi.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARC: Elide redundant setup of DMA callbacks

commit 45c3b08a117e2232fc8d7b9e849ead36386f4f96 upstream.

For resources shared by all cores such as SLC and IOC, only the master
core needs to do any setups / enabling / disabling etc.

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARC: Call trace_hardirqs_on() before enabling irqs

commit 18b43e89d295cc65151c505c643c98fb2c320e59 upstream.

trace_hardirqs_on_caller() in lockdep.c expects to be called before, not
after interrupts are actually enabled.

The following comment in kernel/locking/lockdep.c substantiates this
claim:

"
/*
 * We're enabling irqs and according to our state above irqs weren't
 * already enabled, yet we find the hardware thinks they are in fact
 * enabled.. someone messed up their IRQ state tracing.
 */
"

An example can be found in include/linux/irqflags.h:

do { trace_hardirqs_on(); raw_local_irq_enable(); } while (0)

Without this change, we hit the following DEBUG_LOCKS_WARN_ON.

[    7.760000] ------------[ cut here ]------------
[    7.760000] WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:2711 resume_user_mode_begin+0x48/0xf0
[    7.770000] DEBUG_LOCKS_WARN_ON(!irqs_disabled())
[    7.780000] Modules linked in:
[    7.780000] CPU: 0 PID: 1 Comm: init Not tainted 4.7.0-00003-gc668bb9-dirty #366
[    7.790000]
[    7.790000] Stack Trace:
[    7.790000]   arc_unwind_core.constprop.1+0xa4/0x118
[    7.800000]   warn_slowpath_fmt+0x72/0x158
[    7.800000]   resume_user_mode_begin+0x48/0xf0
[    7.810000] ---[ end trace 6f6a7a8fae20d2f0 ]---

Signed-off-by: Daniel Mentz <danielmentz@google.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARC: use correct offset in pt_regs for saving/restoring user mode r25

commit 86147e3cfa5e118b61e78f4f0bf29e920dcbd477 upstream.

User mode callee regs are explicitly collected before signal delivery or
breakpoint trap. r25 is special for kernel as it serves as task pointer,
so user mode value is clobbered very early. It is saved in pt_regs where
generally only scratch (aka caller saved) regs are saved.

The code to access the corresponding pt_regs location had a subtle bug as
it was using load/store with scaling of offset, whereas the offset was already
byte wise correct. So fix this by replacing LD.AS with a standard LD

Signed-off-by: Liav Rehana <liavr@mellanox.com>
Reviewed-by: Alexey Brodkin <abrodkin@synopsys.com>
[vgupta: rewrote title and commit log]
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARC: build: Better way to detect ISA compatible toolchain

commit 20d780374c81cf237834af2202c26df2100ddd69 upstream.

ARC architecture has 2 instruction sets: ARCompact/ARCv2.
While same gcc supports compiling for either (using appropriate toggles),
we can't use the same toolchain to build kernel because libgcc needs
to be unique and the toolchian (uClibc based) is not multilibed.

uClibc toolchain is convenient since it allows all userspace and
kernel to be built with a single install for an ISA.

This however means 2 gnu installs (with same triplet prefix) are needed
for building for 2 ISA and need to be in PATH.
As developers we keep switching the builds, but would occassionally fail
to update the PATH leading to usage of wrong tools. And this would only
show up at the end of kernel build when linking incompatible libgcc.

So the initial solution was to have gcc define a special preprocessor macro
DEFAULT_CPU_xxx which is unique for default toolchain configuration.
Claudiu proposed using grep for an existing preprocessor macro which is
again uniquely defined per ISA.

Cc: Michal Marek <mmarek@suse.cz>
Suggested-by: Claudiu Zissulescu <claziss@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: fix aliasing_ppgtt leak

commit 3871f42a57efcdc6a9da751a8cb6fa196c212289 upstream.

In i915_ggtt_cleanup_hw we need to remember to free aliasing_ppgtt. This
fixes the following kmemleak message:

unreferenced object 0xffff880213cca000 (size 8192):
  comm "modprobe", pid 1298, jiffies 4294745402 (age 703.930s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff817c808e>] kmemleak_alloc+0x4e/0xb0
    [<ffffffff8121f9c2>] kmem_cache_alloc_trace+0x142/0x1d0
    [<ffffffffa06d11ef>] i915_gem_init_ggtt+0x10f/0x210 [i915]
    [<ffffffffa06d71bb>] i915_gem_init+0x5b/0xd0 [i915]
    [<ffffffffa069749a>] i915_driver_load+0x97a/0x1460 [i915]
    [<ffffffffa06a26ef>] i915_pci_probe+0x4f/0x70 [i915]
    [<ffffffff81423015>] local_pci_probe+0x45/0xa0
    [<ffffffff81424463>] pci_device_probe+0x103/0x150
    [<ffffffff81515e6c>] driver_probe_device+0x22c/0x440
    [<ffffffff81516151>] __driver_attach+0xd1/0xf0
    [<ffffffff8151379c>] bus_for_each_dev+0x6c/0xc0
    [<ffffffff8151555e>] driver_attach+0x1e/0x20
    [<ffffffff81514fa3>] bus_add_driver+0x1c3/0x280
    [<ffffffff81516aa0>] driver_register+0x60/0xe0
    [<ffffffff8142297c>] __pci_register_driver+0x4c/0x50
    [<ffffffffa013605b>] 0xffffffffa013605b

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: b18b6bde300e ("drm/i915/bdw: Free PPGTT struct")
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1470420280-21417-1-git-send-email-matthew.auld@intel.com
(cherry picked from commit cb7f27601c81a1e0454e9461e96f65b31fafbea0)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: record error code when ring test failed

commit 1f703e6679f373f5bba4efe7093aa82e91af4037 upstream.

Otherwise we may miss errors.

Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/amdgpu: sdma resume fail during S4 on CI

commit 10ea9434065e56fe14287f89258ecf2fb684ed1a upstream.

SDMA could be fail in the thaw() and restore() processes, do software reset
if each SDMA engine is busy.

Signed-off-by: JimQu <Jim.Qu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: skip TV/CV in display parsing

commit 611a1507fe8569ce1adab3abc982ea58ab559fb9 upstream.

No asics supported by amdgpu support analog TV.

Workaround for bug:
https://bugs.freedesktop.org/show_bug.cgi?id=97460

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: avoid a possible array overflow

commit e1718d97aa88ea44a6a8f50ff464253dd0dacf01 upstream.

When looking up the connector type make sure the index
is valid.  Avoids a later crash if we read past the end
of the array.

Workaround for bug:
https://bugs.freedesktop.org/show_bug.cgi?id=97460

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: fix amdgpu_move_blit on 32bit systems

commit 815d27a46f3119f74fe01fe10bf683aa5bc55597 upstream.

This bug seems to be present for a very long time.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: Change GART offset to 64-bit

commit cab0b8d50e9bbef62c04067072c953433a87a9ff upstream.

The GART aperture size can be bigger than 4GB. Therefore the offset
used in amdgpu_gart_bind and amdgpu_gart_unbind must be 64-bit.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: fix sched WARNING "do not call blocking ops when !TASK_RUNNING"

commit fcf68f3c0bb2a541aa47a2a38b8939edf84fd529 upstream.

When using CONFIG_DEBUG_ATOMIC_SLEEP, the scheduler nicely points out
that we're calling sleeping primitives within the wait_event loop, which
means we might clobber the task state:

[   10.831289] do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffc00026b610>]
[   10.845531] ------------[ cut here ]------------
[   10.850161] WARNING: at kernel/sched/core.c:7630
...
[   12.164333] ---[ end trace 45409966a9a76438 ]---
[   12.168942] Call trace:
[   12.171391] [<ffffffc00024ed44>] __might_sleep+0x64/0x90
[   12.176699] [<ffffffc000954774>] mutex_lock_nested+0x50/0x3fc
[   12.182440] [<ffffffc0007b9424>] iio_kfifo_buf_data_available+0x28/0x4c
[   12.189043] [<ffffffc0007b76ac>] iio_buffer_ready+0x60/0xe0
[   12.194608] [<ffffffc0007b7834>] iio_buffer_read_first_n_outer+0x108/0x1a8
[   12.201474] [<ffffffc000370d48>] __vfs_read+0x58/0x114
[   12.206606] [<ffffffc000371740>] vfs_read+0x94/0x118
[   12.211564] [<ffffffc0003720f8>] SyS_read+0x64/0xb4
[   12.216436] [<ffffffc000203cb4>] el0_svc_naked+0x24/0x28

To avoid this, we should (a la https://lwn.net/Articles/628628/) use the
wait_woken() function, which avoids the nested sleeping while still
handling races between waiting / wake-events.

Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched/nohz: Fix affine unpinned timers mess

commit 444969223c81c7d0a95136b7b4cfdcfbc96ac5bd upstream.

The following commit:

  9642d18eee2c ("nohz: Affine unpinned timers to housekeepers")'

intended to affine unpinned timers to housekeepers:

  unpinned timers(full dynaticks, idle)   =>   nearest busy housekeepers(otherwise, fallback to any housekeepers)
  unpinned timers(full dynaticks, busy)   =>   nearest busy housekeepers(otherwise, fallback to any housekeepers)
  unpinned timers(houserkeepers, idle)    =>   nearest busy housekeepers(otherwise, fallback to itself)

However, the !idle_cpu(i) && is_housekeeping_cpu(cpu) check modified the
intention to:

  unpinned timers(full dynaticks, idle)   =>   any housekeepers(no mattter cpu topology)
  unpinned timers(full dynaticks, busy)   =>   any housekeepers(no mattter cpu topology)
  unpinned timers(housekeepers, idle)     =>   any busy cpus(otherwise, fallback to any housekeepers)

This patch fixes it by checking if there are busy housekeepers nearby,
otherwise falls to any housekeepers/itself. After the patch:

  unpinned timers(full dynaticks, idle)   =>   nearest busy housekeepers(otherwise, fallback to any housekeepers)
  unpinned timers(full dynaticks, busy)   =>   nearest busy housekeepers(otherwise, fallback to any housekeepers)
  unpinned timers(housekeepers, idle)     =>   nearest busy housekeepers(otherwise, fallback to itself)

Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
[ Fixed the changelog. ]
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Fixes: 'commit 9642d18eee2c ("nohz: Affine unpinned timers to housekeepers")'
Link: http://lkml.kernel.org/r/1462344334-8303-1-git-send-email-wanpeng.li@hotmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched/cputime: Fix NO_HZ_FULL getrusage() monotonicity regression

commit 173be9a14f7b2e901cf77c18b1aafd4d672e9d9e upstream.

Mike reports:

 Roughly 10% of the time, ltp testcase getrusage04 fails:
 getrusage04    0  TINFO  :  Expected timers granularity is 4000 us
 getrusage04    0  TINFO  :  Using 1 as multiply factor for max [us]time increment (1000+4000us)!
 getrusage04    0  TINFO  :  utime:           0us; stime:         179us
 getrusage04    0  TINFO  :  utime:        3751us; stime:           0us
 getrusage04    1  TFAIL  :  getrusage04.c:133: stime increased > 5000us:

And tracked it down to the case where the task simply doesn't get
_any_ [us]time ticks.

Update the code to assume all rtime is utime when we lack information,
thus ensuring a task that elides the tick gets time accounted.

Reported-by: Mike Galbraith <umgwanakikbuti@gmail.com>
Tested-by: Mike Galbraith <umgwanakikbuti@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Fredrik Markstrom <fredrik.markstrom@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Radim <rkrcmar@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Fixes: 9d7fb0427648 ("sched/cputime: Guarantee stime + utime == rtime")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

of: fix reference counting in of_graph_get_endpoint_by_regs

commit 34276bb062b8449b3b0a208c9b848a1a27920075 upstream.

The called of_graph_get_next_endpoint() already decrements the refcount
of the prev node, so it is wrong to do it again in the calling function.

Use the for_each_endpoint_of_node() helper to interate through the
endpoint OF nodes, which already does the right thing and simplifies
the code a bit.

Fixes: 8ccd0d0ca041
(of: add helper for getting endpoint node of specific identifiers)
Reported-by: David Jander <david@protonic.nl>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: rockchip: add reset saradc node for rk3368 SoCs

commit 78ec79bfd59e126e1cb394302bfa531a420b3ecd upstream.

SARADC controller needs to be reset before programming it, otherwise
it will not function properly.

Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: fix purging multicast PS buffer queue

commit 6b07d9ca9b5363dda959b9582a3fc9c0b89ef3b5 upstream.

The code currently assumes that buffered multicast PS frames don't have
a pending ACK frame for tx status reporting.
However, hostapd sends a broadcast deauth frame on teardown for which tx
status is requested. This can lead to the "Have pending ack frames"
warning on module reload.
Fix this by using ieee80211_free_txskb/ieee80211_purge_tx_queue.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/dasd: fix hanging device after clear subchannel

commit 9ba333dc55cbb9523553df973adb3024d223e905 upstream.

When a device is in a status where CIO has killed all I/O by itself the
interrupt for a clear request may not contain an irb to determine the
clear function. Instead it contains an error pointer -EIO.
This was ignored by the DASD int_handler leading to a hanging device
waiting for a clear interrupt.

Handle -EIO error pointer correctly for requests that are clear pending and
treat the clear as successful.

Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

EDAC: Increment correct counter in edac_inc_ue_error()

commit 993f88f1cc7f0879047ff353e824e5cc8f10adfc upstream.

Fix typo in edac_inc_ue_error() to increment ue_noinfo_count instead of
ce_noinfo_count.

Signed-off-by: Emmanouil Maroudas <emmanouil.maroudas@gmail.com>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Fixes: 4275be635597 ("edac: Change internal representation to work with layers")
Link: http://lkml.kernel.org/r/1461425580-5898-1-git-send-email-emmanouil.maroudas@gmail.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl/amd: Remove the default de-bounce time

commit 8cf4345575a416e6856a6856ac6eaa31ad883126 upstream.

In the function amd_gpio_irq_enable() and
amd_gpio_direction_input(), remove the code which is setting
the default de-bounce time to 2.75ms.

The driver code shall use the same settings as specified in
BIOS. Any default assignment impacts TouchPad behaviour when
the LevelTrig is set to EDGE FALLING.

Reviewed-by:  Ken Xue <Ken.Xue@amd.com>
Signed-off-by: Nitesh Kumar Agrawal <Nitesh-kumar.Agrawal@amd.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/arm-smmu: Don't BUG() if we find aborting STEs with disable_bypass

commit 5bc0a11664e17e9f9551983f5b660bd48b57483c upstream.

The disable_bypass cmdline option changes the SMMUv3 driver to put down
faulting stream table entries by default, as opposed to bypassing
transactions from unconfigured devices.

In this mode of operation, it is entirely expected to see aborting
entries in the stream table if and when we come to installing a valid
translation, so don't trigger a BUG() as a result of misdiagnosing these
entries as stream table corruption.

Fixes: 48ec83bcbcf5 ("iommu/arm-smmu: Add initial driver support for ARM SMMUv3 devices")
Tested-by: Robin Murphy <robin.murphy@arm.com>
Reported-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/arm-smmu: Fix CMDQ error handling

commit aea2037e0d3e23c3be1498feae29f71ca997d9e6 upstream.

In the unlikely event of a global command queue error, the ARM SMMUv3
driver attempts to convert the problematic command into a CMD_SYNC and
resume the command queue. Unfortunately, this code is pretty badly
broken:

  1. It uses the index into the error string table as the CMDQ index,
     so we probably read the wrong entry out of the queue

  2. The arguments to queue_write are the wrong way round, so we end up
     writing from the queue onto the stack.

These happily cancel out, so the kernel is likely to stay alive, but
the command queue will probably fault again when we resume.

This patch fixes the error handling code to use the correct queue index
and write back the CMD_SYNC to the faulting entry.

Fixes: 48ec83bcbcf5 ("iommu/arm-smmu: Add initial driver support for ARM SMMUv3 devices")
Reported-by: Diwakar Subraveti <Diwakar.Subraveti@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/dma: Don't put uninitialised IOVA domains

commit 3ec60043f7c02e1f79e4a90045ff2d2e80042941 upstream.

Due to the limitations of having to wait until we see a device's DMA
restrictions before we know how we want an IOVA domain initialised,
there is a window for error if a DMA ops domain is allocated but later
freed without ever being used. In that case, init_iova_domain() was
never called, so calling put_iova_domain() from iommu_put_dma_cookie()
ends up trying to take an uninitialised lock and crashing.

Make things robust by skipping the call unless the IOVA domain actually
has been initialised, as we probably should have done from the start.

Fixes: 0db2e5d18f76 ("iommu: Implement common IOMMU ops for DMA mapping")
Reported-by: Nate Watterson <nwatters@codeaurora.org>
Reviewed-by: Nate Watterson <nwatters@codeaurora.org>
Tested-by: Nate Watterson <nwatters@codeaurora.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Make sure xhci handles USB_SPEED_SUPER_PLUS devices.

commit 0caf6b33452112e5a1186c8c964e90310e49e6bd upstream.

In most cases the devices with the speed set to USB_SPEED_SUPER_PLUS
are handled like regular SuperSpeed devices.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: ftdi_sio: add PIDs for Ivium Technologies devices

commit 6977495c06f7f47636a076ee5a0ca571279d9697 upstream.

Ivium Technologies uses the FTDI VID with custom PIDs for their line of
electrochemical interfaces and the PalmSens they developed for PalmSens
BV.

Signed-off-by: Robert Delien <robert@delien.nl>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: ftdi_sio: add device ID for WICED USB UART dev board

commit ae34d12cc1e212ffcd92e069030e54dae69c832f upstream.

BCM20706V2_EVAL is a WICED dev board designed with FT2232H USB 2.0
UART/FIFO IC.

To support BCM920706V2_EVAL dev board for WICED development on Linux.
Add the VID(0a5c) and PID(6422) to ftdi_sio driver to allow loading
ftdi_sio for this board.

Signed-off-by: Sheng-Hui J. Chu <s.jeffrey.chu@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: option: add support for Telit LE920A4

commit 01d7956b58e644ea0d2e8d9340c5727a8fc39d70 upstream.

This patch adds a set of compositions for Telit LE920A4.

Compositions in short are:

0x1207: tty + tty
0x1208: tty + adb + tty + tty
0x1211: tty + adb + ecm
0x1212: tty + adb
0x1213: ecm + tty
0x1214: tty + adb + ecm + tty

telit_le922_blacklist_usbcfg3 is reused for compositions 0x1211
and 0x1214 due to the same interfaces positions.

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: option: add D-Link DWM-156/A3

commit cf1b18030de29e4e5b0a57695ae5db4a89da0ff7 upstream.

The device has four interfaces; the three serial ports ought to be
handled by this driver:

00 Diagnostic interface serial port
01 NMEA device serial port
02 Mass storage (sd card)
03 Modem serial port

The other product ids listed in the Windows driver are present already.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>