drm/i915: Nuke legacy flip queueing code

Just a very minimal patch to nuke that code. Lots of the flip
interrupt handling stuff is still around.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170719125502.25696-2-daniel.vetter@ffwll.ch

drm/i915: Pass enum pipe to intel_set_pch_fifo_underrun_reporting()

Commit a21960339c8c ("drm/i915: Consistently use enum pipe for PCH
transcoders") misses some pieces, due to a problem with the patch
format, this patch adds the remaining bits.

Fixes: a21960339c8c ("drm/i915: Consistently use enum pipe for PCH
transcoders")

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170719173928.186638-1-mka@chromium.org

drm/i915/selftests: Mark contexts as lost during freeing of mock device

We need to unpin the last retired context early in the shutdown sequence
so that its RCU free is done before we try to free the context ida. I
included this in a later patch ("drm/i915: Keep a recent cache of freed
contexts objects for reuse") and so missed that the selftests were broken
in the meantime.

Reported-by: Matthew Auld <matthew.auld@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101627
Fixes: 5f09a9c8ab6b ("drm/i915: Allow contexts to be unreferenced locklessly")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170719135957.14603-1-chris@chris-wilson.co.uk
Tested-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>

drm/i915: unregister interfaces first in unload

We first need to make sure no one else can get at us anymore,
before we can proceed to tear down all the datastructures.

Just a small step towards eventually the perfect unload code ...

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170714224656.6431-3-daniel.vetter@ffwll.ch

drm/i915: Fix fbdev unload sequence

First thing we need to do is unregister the fbdev instance, but we
can't just go ahead and kfree it. That must wait until the hotplug and
polling work are stopped, since they can race with the with the
teardown. That means we need to split up the fbdev teardown into the
unregister part and the cleanup part.

I originally suspected that this was broken in one of the unload
shuffles, but on closer inspection the oldest sequence I've dug out
also gets this wrong. Just not quite so badly.

I've run drv_module_reload a few hundred times and it's rock solid
compared to insta-death beforehand. This bug seems to have been
uncovered by

commit 88be58be886f1215cc73dc8c273c985eecd7385c
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu Jul 6 15:00:19 2017 +0200

    drm/i915/fbdev: Always forward hotplug events

But the effect of that seems to only be to increase the race window
enough to make it blow up easier. I'm not exactly clear on what's
going on there ...

v2: Fix whitespace and use fetch_and_zero (Chris).

Testcase: igt/drv_module_reload
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101791
Cc: martin.peres@free.fr
Cc: chris@chris-wilson.co.uk
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170714224656.6431-2-daniel.vetter@ffwll.ch

drm/atomic-helper: Fix leak in disable_all

The legacy plane->fb pointer is refcounted by calling
drm_atomic_clean_old_fb().

In practice this isn't a real problem because:
- The caller in the i915 gpu reset code restores the original state
  again, which means the plane->fb pointer won't change, hence can't
  leak.
- Drivers using drm_atomic_helper_shutdown call the fbdev cleanup
  first, and that usually cleans up the fb through
  drm_remove_framebuffer, which does this correctly.
- Without fbdev the only framebuffers are from userspace, and those
  get cleaned up (again using drm_remove_framebuffer) befor the driver
  can even be unloaded.

But in i915 I've switched the cleanup sequence around so that the
_shutdown() calls happens after the drm_remove_framebuffer(), which is
how I discovered this issue.

v2: My analysis why the current code was ok for gpu reset and
suspend/resume was correct, but then I totally failed to realize that
we better keep this symmetric. Thanksfully CI noticed that for
balance, a refcounting bug must exist at 2 places if previously there
was no issue ...

v3: Don't be lazy and compute the plane_mask in
commit_duplicated_state properly too, instead of just using ~0U.

Cc: martin.peres@free.fr
Cc: chris@chris-wilson.co.uk
Acked-by: Dave Airlie <airlied@gmail.com> (v1)
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170715093106.19873-1-daniel.vetter@ffwll.ch

drm/i915/selftests: Attach a stub pm_domain

Supply a pm_domain and its ops for our mock GEM device so that
device runtime pm doesn't complain even though we only want to mark it
permanently active!

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170718173028.31207-1-chris@chris-wilson.co.uk
Tested-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>

drm/i915: Drain the device workqueue on unload

Workers on the i915->wq may rearm themselves so for completeness we need
to replace our flush_workqueue() with a call to drain_workqueue() before
unloading the device.

v2: Reinforce the drain_workqueue with an preceding rcu_barrier() as a
few of the tasks that need to be drained may first be armed by RCU.

References: https://bugs.freedesktop.org/show_bug.cgi?id=101627
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170718134124.14832-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>

drm/i915: More stolen quirking

I've found a bios with an off-by-one at the other end. There's a pnp
reservation for 0xc5400000-0xc7fffffe and we want stolen in 0xc6000000
through 0xc8000000.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99872
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98683
Cc: Martin Peres <martin.peres@linux.intel.com>
Reviewed-by: Martin Peres <martin.peres@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170719100043.30851-1-daniel.vetter@ffwll.ch

drm/i915: Fix bad comparison in skl_compute_plane_wm, v2.

ddb_allocation && ddb_allocation / blocks_per_line >= 1 is the same
as ddb_allocation >= blocks_per_line, so use the latter to simplify
this.

This fixes the following compiler warning:

drivers/gpu/drm/i915/intel_pm.c:4467]: (warning) Comparison of a
boolean expression with an integer other than 0 or 1.

Changes since v1:
- Rebase, was missing the changes to the macro names.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: d555cb5827d6 ("drm/i915/skl+: use linetime latency if ddb size is not available")
Cc: "Mahesh Kumar" <mahesh1.kumar@intel.com>
Reported-by: David Binderman <dcb314@hotmail.com>
Cc: David Binderman <dcb314@hotmail.com>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.13-rc1+
Link: http://patchwork.freedesktop.org/patch/msgid/20170717120230.2023-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Mahesh Kumar <mahesh1.kumar@intel.com>

drm/i915: Explicit the connector name for DP link training result

This adds the connector name when printing a debug message about the DP
link training result. It is useful to figure out what connector is
failing when multiple DP connectors are used.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@linux.intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170718142536.2306-1-paul.kocialkowski@linux.intel.com

drm/i915: Fix cursor updates on some platforms

Turns out that just writing CURPOS isn't sufficient to move the cursor
on some platforms. My 830 works just fine, but eg. 945 and PNV don't.
On those platforms we need to arm even the CURPOS update with a
CURBASE write.

Even worse, a write to any of the cursor register apart from CURBASE
will cancel an already pending cursor update. So if we have armed a
CURCNTR/CURBASE update, a subsequent CURPOS write prior to vblank
would cancel that armed update. Thus we're left with a cursor that
doesn't appear to move, or even change shape.

Fix the problem by always performing the CURBASE write after a
CURPOS write. Bspec is somewhat unclear which platforms actually
require this CURBASE write and which don't. So to keep it simple
and to make sure we really fix the problem across all supported
devices, let's just perform the CURBASE write unconditionally.

Cc: Paul Menzel <pmenzel@molgen.mpg.de>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101790
Fixes: 75343a44c901 ("drm/i915: Drop useless posting reads from cursor commit")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Paul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170714155227.6089-1-ville.syrjala@linux.intel.com

drm/i915: Consistently use enum pipe for PCH transcoders

The current code uses in some instances enum transcoder for PCH
transcoders and enum pipe in others. This is error prone and clang
raises warnings like this:

drivers/gpu/drm/i915/intel_dp.c:3546:51: warning: implicit conversion
  from enumeration type 'enum pipe' to different enumeration type
  'enum transcoder' [-Wenum-conversion]
    intel_set_pch_fifo_underrun_reporting(dev_priv, PIPE_A, false);

Consistently use the type enum pipe for PCH transcoders.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170717181403.57324-1-mka@chromium.org

drm/i915: Fix user ptr check size in eb_relocate_vma()

Fix the sizeof(ptr) vs. sizeof(*ptr) typo.

Fixes: 2889caa92321 ("drm/i915: Eliminate lots of iterations over the execobjects array")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170714151242.517-2-imre.deak@intel.com

drm/i915: Fix error checking/locking in perf/lookup_context()

1acfc104cdf8 missed to convert this one caller to be lockless. The side
effect of that was that the error check in lookup_context() became
incorrect. Convert now this caller too.

Fixes: 1acfc104cdf ("drm/i915: Enable rcu-only context lookups")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170714151242.517-1-imre.deak@intel.com

drm/i915: Update DRIVER_DATE to 20170717

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Protect against deferred fbdev setup

We could probably hit this already with our current async fbdev init,
but it's much easier to hit this with the new deferred fbdev setup
that I'm working on polishing.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reported-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170706130023.28417-2-daniel.vetter@ffwll.ch

drm/i915/fbdev: Always forward hotplug events

With deferred fbdev setup we always need to forward hotplug events,
even if fbdev isn't fully set up yet. Otherwise the deferred setup
will neer happen.

Originally this check was added in

commit c45eb4fed12d278d3619f1904885bd0d7bcbf036 (tag: drm-intel-next-fixes-2016-08-05)
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Wed Jul 13 18:34:45 2016 +0100

    drm/i915/fbdev: Check for the framebuffer before use

But the specific case of the hotplug function blowing up was fixed in

commit 50c3dc970a09b3b60422a58934cc27a413288bab
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Fri Jun 27 17:19:22 2014 +0200

    drm/fb-helper: Fix hpd vs. initial config races

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170706130023.28417-1-daniel.vetter@ffwll.ch

drm/i915/skl+: unify cpp value in WM calculation

use same cpp value in different phase of plane WM caluclation.

Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170705143154.32132-7-mahesh1.kumar@intel.com

drm/i915/skl+: WM calculation don't require height

height of plane was require to swap width/height in case of 90/270
rotation. Now src structure contains already swapped values, So we
don't have to calculate height of the plane.

Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170705143154.32132-6-mahesh1.kumar@intel.com

drm/i915: Addition wrapper for fixed16.16 operation

This patch introduce addition wrapper for fixed point 16.16 operations.
Which will be used by later patches to avoid direct member variables
access of fixed_16_16_t structure.

add_fixed16 : takes 2 fixed_16_16_t variable & returns fixed_16_16_t
add_fixed16_u32 : takes fixed_16_16_t & u32 variable & returns fixed_16_16_t

Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170705143154.32132-5-mahesh1.kumar@intel.com

drm/i915: cleanup fixed-point wrappers naming

This patch make naming of fixed-point wrappers consistent
operation_<any_post_operation>_<1st operand>_<2nd operand>
also shorten the name for fixed_16_16 to fixed16

s/u32_to_fixed_16_16/u32_to_fixed16
s/fixed_16_16_to_u32/fixed16_to_u32
s/fixed_16_16_to_u32_round_up/fixed16_to_u32_round_up
s/min_fixed_16_16/min_fixed16
s/max_fixed_16_16/max_fixed16
s/mul_u32_fixed_16_16/mul_u32_fixed16
s/fixed_16_16_div/div_fixed16

Changes Since V1:
 - Split the patch in more logical patches (Maarten)
Changes Since V2:
 - Rebase

Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170705143154.32132-4-mahesh1.kumar@intel.com

drm/i915: Always perform internal fixed16 division in 64 bits

This patch combines fixed_16_16_div & fixed_16_16_div_u64 wrappers.
And new fixed_16_16_div wrapper always performs division operation in
u64 internally, to avoid any data loss which was happening in earlier
version of wrapper.
earlier wrapper was converting u32 to fixed16 in 32 bit so we were
losing 16-MSB data.

Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170705143154.32132-3-mahesh1.kumar@intel.com
[mlankhorst: Fix typo in commit message.]

drm/i915: take-out common clamping code of fixed16 wrappers

This patch creates a new function for clamping u64 to fixed16.
And make use of this function in other fixed16 wrappers.

Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170705143154.32132-2-mahesh1.kumar@intel.com

drm/i915/cnl: Add missing type case.

Paulo had noticed that inside cnl_ddi_vswing_program
the case was handling voltage but with no indication
of type where a missing type could also take us to that
path. So my first attempt was to add a message to
let clear who trigger that path.

However DK had a better idea that is to handle the
missed type sooner before it might take to that path.
So this v2 here uses his approach.

v2: Handle missed type sooner.

Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170710205852.28352-1-rodrigo.vivi@intel.com

Merge tag 'drm-for-v4.13' into drm-intel-next-queued

Resync with the main drm-next pull request for 4.13. What we really
need is to fully resync with pending drm-misc, but that's not yet
possible due to the still ongoing merge window.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

drm/i915/cnl: Add max allowed Cannonlake DC.

This is a follow-up after enabling DC states with
commit: "drm/i915/DMC/CNL: Load DMC on CNL".

Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1499373908-26761-1-git-send-email-rodrigo.vivi@intel.com

drm/i915: Make DP-MST connector info work

Commit 9a148a96fc3a ("drm/i915/debugfs: add dp mst info") adds support
for DP-MST to intel_connector_info, but forgot to remove the early
return for DP-MST.

Remove it, and print out MST connectors directly.

Fixes: 9a148a96fc3a ("drm/i915/debugfs: add dp mst info")
Cc: <stable@vger.kernel.org> # v4.11+
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Libin Yang <libin.yang@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170626083349.24389-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>

drm/i915/cnl: Get DDI clock based on PLLs.

PLLs are the source clocks for the DDIs so in order
to determine the ddi clock we need to check the PLL
configuration.

v2: Mika pointed out that 24 was hardcoded while it
    should consider ref clock that can be either 24KHz
    or 19.2KHz on CNL.

Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1499374321-31152-1-git-send-email-rodrigo.vivi@intel.com

drm/i915/cnl: Inherit RPS stuff from previous platforms.

Apparently no change on RPS stuff from previous platforms.

v2: Merging to rps related patches in one and also adding
    missed cases.

Cc: David Weinehall <david.weinehall@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1499373673-25066-1-git-send-email-rodrigo.vivi@intel.com

drm/i915/cnl: Gen10 render context size.

No change on render context size is required for Gen10.

So this patch doesn't change the default behaviour,
but only avoid the missing_case message.

Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Link: http://patchwork.freedesktop.org/patch/msgid/1499375184-5725-1-git-send-email-rodrigo.vivi@intel.com

drm/i915/cnl: Don't trust VBT's alternate pin for port D for now.

Cannon Lake's VBT that is currently available for B0 stepping
states that port D uses alternate pin 3 messing up with the
default pin-port mapping table. Using that information we cannot
get HDMI working properly. So for now we don't relly on VBT for
this information.

Cc: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Clinton Taylor <clinton.a.taylor@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1499375295-6454-1-git-send-email-rodrigo.vivi@intel.com

drm/i915: Fix the kernel panic when using aliasing ppgtt

The ppgtt should be get directly from i915_address_space *vm instead of
vma->vm.

v2:
- add one more fix for bxt. (Chris)

Fixes: 4a234c5fae16 ("drm/i915: pass the vma to insert_entries")
Bugzilla:https://bugs.freedesktop.org/show_bug.cgi?id=101713
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com> v1
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1499421059-18262-1-git-send-email-chuanxiao.dong@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/cnl: Cannonlake color init.

Cannonlake has same color setup as Geminilake.
Legacy color load luts doesn't work anymore on Cannonlake+.

Cc: Clint Taylor <clinton.a.taylor@intel.com>
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Clinton Taylor <clinton.a.taylor@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1499374873-2454-1-git-send-email-rodrigo.vivi@intel.com

drm/i915/cnl: Add force wake for gen10+.

By spec there is no change on force wake registers
for Cannonlake. Let's reuse gen9 one.

v2: Adding missing case for the write part. (Tvrtko)
v3: Rebase on recent tree.
v4: Make it for gen9+ instead adding gen10 only. (by Joonas).

Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1499302831-17773-1-git-send-email-rodrigo.vivi@intel.com

x86/gpu: CNL uses the same GMS values as SKL

So don't forget to reserve its stolen memory bits.

v2: Add ack and remove "TODO" from commit message.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://patchwork.freedesktop.org/patch/msgid/1499302845-17856-1-git-send-email-rodrigo.vivi@intel.com

drm/i915/cnl: Fix comment about AUX IO power well enable/disable

The comments match an earlier version of the patch, fix them to match
the current state.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1498750622-14023-6-git-send-email-imre.deak@intel.com

drm/i915/gen9+: Don't remove secondary power well requests

So far in an attempt to make sure all power wells get disabled during
display uninitialization the driver removed any secondary request bits
(BIOS, KVMR, DEBUG) that were set for a given power well. The known
source for these requests was DMC's request on power well 1 and the misc
IO power well. Since DMC is inactive (DC states are disabled) at the
point we disable these power wells, there shouldn't be any reason to
leave them on. However there are two problems with the above
assumption: Bspec requires that the misc IO power well stays enabled
(without providing a reason) and there can be KVMR requests that we
can't remove anyway (the KVMR request register is R/O). Atm, a KVMR
request can trigger a timeout WARN when trying to disable power wells.

To make the code aligned to Bspec and to get rid of the KVMR WARN, don't
try to remove the secondary requests, only detect them and stop polling
for the power well disabled state when any one is set.

Also add a comment about the timeout values required by Bspec when
enabling power wells and the fact that waiting for them to get disabled
is not required by Bspec.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98564
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1498750622-14023-5-git-send-email-imre.deak@intel.com

drm/i915/bxt, glk: Fix assert on conditions for DC9 enabling

What we want to assert based on the conditions required by Bspec is that
power well 2 is disabled, so no need to check for other power wells.
In addition we can only check if the driver's request is removed, the
actual state depends on whether the other request bits are set or not
(BIOS, KVMR, DEBUG). So check only the driver's request bit.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1498750622-14023-4-git-send-email-imre.deak@intel.com

drm/i915/skl: Don't disable misc IO power well during display uninit

Bspec requires leaving the misc IO power well enabled during display
uninit, so align the code accordingly.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1498750622-14023-3-git-send-email-imre.deak@intel.com

drm/i915/gen9+: Add 10 us delay after power well 1/AUX IO pw disabling

Bspec requires a 10 us delay after disabling power well 1 and - if not
toggled on-demand - the AUX IO power wells during display uninit.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1498750622-14023-2-git-send-email-imre.deak@intel.com

drm/i915: Only free the oldest stale context before allocating

Currently, we move all unreferenced contexts to an RCU free list and
then onto a worker for eventual reaping. To compensate against this
growing into a long list with frequent allocations starving the system
of available memory, before we allocate a new context we reap all the
stale contexts. This puts all the cost of destroying the context into
the next allocator, which is presumably more sensitive to syscall
latency and unfair. We can limit the number of contexts being freed by
the new allocator to both keep the list trimmed and to allow the
allocator to be reasonably fast.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170705142634.18554-4-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Drop request retirement before reaping stale contexts

Before we create a new context, we try and reap all the stale contexts
(i.e. those that are freed but waiting for a worker to come and return
their allocations to the system). Before we do this, we retire all
requests so that we clear any inflight no longer used contexts (who are
only being kept alived by those inflght requests). However, any context
that is finally unreferenced by this retirement is put onto an RCU list
and not available for immediately reaping, we stall for no immediate
benefit.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170705142634.18554-3-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Move stale context reaping to common i915_gem_context_create

We need to reap the stale contexts for all new contexts, be they created
by user in i915_gem_context_ioctl or from opening a new file in
i915_gem_context_open. Both paths may be called very frequently
accumulating many stale contexts before any worker has a chance to run
and free their memory.

Fixes: 1acfc104cdf8 ("drm/i915: Enable rcu-only context lookups")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170705142634.18554-2-chris@chris-wilson.co.uk

drm/i915: Check new context against kernel_context after reporting an error

Avoid any pointer dereference in inspecting a potential PTR_ERR by
checking for the error pointer before checking for an invalid context.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170705142634.18554-1-chris@chris-wilson.co.uk

drm/i915: Setting pch_id for HSW/BDW in virtual environment

In a IGD passthrough environment, the real ISA bridge may doesn't exist.
then pch_id couldn't be correctly gotten from ISA bridge, but pch_id is
used to identify LPT_H and LPT_LP. Currently i915 treat all LPT pch as
LPT_H,then errors occur when i915 runs on LPT_LP machines with igd
passthrough.

This patch set pch_id for HSW/BDW according to IGD type and isn't fully
correct. But it solves such issue on HSW/BDW ult/ulx machines.
QA CI system is blocked by this issue for a long time, it's better that
we could merge it to unblock QA CI system.

We know the root cause is in device model of virtual passthrough, and
will resolve it in the future with several parts cooperation in kernel,
qemu and xen.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99938

Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1497496305-5364-1-git-send-email-xiong.y.zhang@intel.com

drm: i915: sysfs: constify attribute_group structures.

attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/sysfs.h> work with const
attribute_group. So mark the non-const structs as const.

File size before:
   text    data     bss     dec     hex filename
   4028    1088       0    5116    13fc drivers/gpu/drm/i915/i915_sysfs.o

File size After adding 'const':
   text    data     bss     dec     hex filename
   4196     928       0    5124    1404 drivers/gpu/drm/i915/i915_sysfs.o

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/13b5c875e677c10e6257be4fac31b2b6c77a494f.1499079914.git.arvind.yadav.cs@gmail.com

drm: Remove unused drm_file parameter to drm_syncobj_replace_fence()

the drm_file parameter is unused, so remove it.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Airlie <airlied@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge branch 'drm-next-4.13' of git://people.freedesktop.org/~agd5f/linux into drm-next

Fixes for 4.13:
- Various fixes for Raven
- Various fixes for Vega10
- Stability fixes for KIQ
- Fix reloading the driver
- Fix S3 on vega10
- Misc other fixes

* 'drm-next-4.13' of git://people.freedesktop.org/~agd5f/linux: (26 commits)
  drm/amd/powerplay: fix bug fail to remove sysfs when rmmod amdgpu.
  amdgpu: Set cik/si_support to 1 by default if radeon isn't built
  drm/amdgpu/gfx9: fix driver reload with KIQ
  drm/amdgpu/gfx8: fix driver reload with KIQ
  drm/amdgpu: Don't call amd_powerplay_destroy() if we don't have powerplay
  drm/ttm: Fix use-after-free in ttm_bo_clean_mm
  drm/amd/amdgpu: move get memory type function from early init to sw init
  drm/amdgpu/cgs: always set reference clock in mode_info
  drm/amdgpu: fix vblank_time when displays are off
  drm/amd/powerplay: power value format change for Vega10
  drm/amdgpu/gfx9: support the amdgpu.disable_cu option
  drm/amd/powerplay: change PPSMC_MSG_GetCurrPkgPwr for Vega10
  drm/amdgpu: Make amdgpu_cs_parser_init static (v2)
  drm/amdgpu/cs: fix a typo in a comment
  drm/amdgpu: Fix the exported always on CU bitmap
  drm/amdgpu/gfx9: gfx_v9_0_enable_gfx_static_mg_power_gating() can be static
  drm/amdgpu/psp: upper_32_bits/lower_32_bits for address setup
  drm/amd/powerplay/cz: print message if smc message fails
  drm/amdgpu: fix typo in amdgpu_debugfs_test_ib_init
  drm/amdgpu: enable mmhub pg on raven
  ...

drm/amd/powerplay: fix bug fail to remove sysfs when rmmod amdgpu.

when hw_fini, pp will disable dpm.so remove sysfs before
disable dpm.

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu: Set cik/si_support to 1 by default if radeon isn't built

It was required to explicitly set these parameters to 1, even if the
radeon driver isn't built at all, which is not intuitive.

Reported-by: Shawn Starr <shawn.starr@rogers.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx9: fix driver reload with KIQ

Drop the KCQ disabling via KIQ.  We disable the MEC shortly
after anyway, so there is no need to wait for all of this.
Doing so seems to leave the MEC in a bad way.

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx8: fix driver reload with KIQ

Drop the deactivation in KIQ init and drop the KCQ disabling
via KIQ.  We disable the MEC shortly after anyway, so there is
no need to wait for all of this.  Doing so seems to leave the
MEC in a bad way.

Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/i915/edp: Add a T12 panel delay quirk to fix DP AUX CH timeouts

This patch fixes the DP AUX CH timeouts observed during CI IGT
tests thus fixing the CI failures. This is done by adding a
quirk for a particular PCI device that requires the panel power
cycle delay (T12) to be set to 800ms which is 300msecs more than
the minimum value specified in the eDP spec. So a quirk is
implemented for that specific PCI device.

v4:
* Add Bugzilla links for FDO bugs in the commit message (Ville, Jani)
v3:
* Change some comments, specify the delay as 800 * 10 (Ville)
v2:
* Change the function and variable names to from PPS_T12_
to _T12 since it is a T12 delay (Clint)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101144
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101154
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101167
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101515
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Clinton Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Clinton Taylor <clinton.a.taylor@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1498840428-23176-1-git-send-email-manasi.d.navare@intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915/skl+: Scaling not supported in IF-ID Interlace mode

GEN9+ Interlace fetch mode doesn't support pipe/plane scaling,
This patch adds check to fail the flip if pipe/plane scaling is
requested in Interlace fetch mode.

Changes since V1:
 - move check to skl_update_scaler (ville)
 - mode to adjusted_mode (ville)
 - combine pipe/plane scaling check
Changes since V2:
 - Indentation fix
 - Added TODO to handle/reject NV12 with interlace mode

Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170630121100.20159-3-mahesh1.kumar@intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915/skl+: Check for supported plane configuration in Interlace mode

In Gen9 platform Interlaced fetch mode doesn't support following plane
configuration:
 - Y/Yf tiling
 - 90/270 rotation
 - YUV420 hybrid planar source pixel formats.

This patch adds check to fail the flip if any of the above configuration
is requested.

Changes since V1:
 - handle checks in intel_plane_atomic_check_with_state (ville)
 - takeout plane scaler checks combile with pipe scaler in next patch
Changes since V2:
 - No need to check for NV12 as it need scaling, so it will be rejected
   by scaling check (ville)

Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170630121100.20159-2-mahesh1.kumar@intel.com
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90238
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915/fbdev: Check for existence of ifbdev->vma before operations

Commit fabef825626d ("drm/i915: Drop struct_mutex around frontbuffer
flushes") adds a dependency to ifbdev->vma when flushing the framebufer,
but the checks are only against the existence of the ifbdev->fb and not
against ifbdev->vma. This leaves a window of opportunity where we may
try to operate on the fbdev prior to it being probed (thanks to
asynchronous booting).

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101534
Fixes: fabef825626d ("drm/i915: Drop struct_mutex around frontbuffer flushes")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170622160211.783-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: stable@vger.kernel.org

drm/i915: Fix use-after-free of context during free_contexts

When iterating the list of contexts to free, we need to use a safe
iterator as we are freeing the link as we go. Pass an extra thick brown
paper bag.

Fixes: 5f09a9c8ab6b ("drm/i915: Allow contexts to be unreferenced locklessly")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170630230517.1938-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>

drm/amdgpu: Don't call amd_powerplay_destroy() if we don't have powerplay

amd_powerplay_destroy() expects a handle pointing to a struct pp_instance.
On chips without PowerPlay, pp_handle points to a struct amdgpu_device. The
resulting attempt to kfree() fields of the wrong struct ends in fire:

[   91.560405] BUG: unable to handle kernel paging request at ffffebe000000620
[   91.560414] IP: kfree+0x57/0x160
[   91.560416] PGD 0
[   91.560416] P4D 0

[   91.560420] Oops: 0000 [#1] SMP
[   91.560422] Modules linked in: tun x86_pkg_temp_thermal crc32_pclmul ghash_clmulni_intel efivarfs amdgpu(-) i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm
[   91.560438] CPU: 6 PID: 3598 Comm: rmmod Not tainted 4.12.0-rc5-drm-next-4.13-ttmpatch+ #1
[   91.560443] Hardware name: Gigabyte Technology Co., Ltd. Z97X-UD3H-BK/Z97X-UD3H-BK-CF, BIOS F6 06/17/2014
[   91.560448] task: ffff8805063d6a00 task.stack: ffffc90003400000
[   91.560451] RIP: 0010:kfree+0x57/0x160
[   91.560454] RSP: 0018:ffffc90003403cc0 EFLAGS: 00010286
[   91.560457] RAX: 000077ff80000000 RBX: 00000000000186a0 RCX: 0000000180400035
[   91.560460] RDX: 0000000180400036 RSI: ffffea001418e740 RDI: ffffea0000000000
[   91.560463] RBP: ffffc90003403cd8 R08: 000000000639d201 R09: 0000000180400035
[   91.560467] R10: ffffebe000000600 R11: 0000000000000300 R12: ffff880500530030
[   91.560470] R13: ffffffffa01e70fc R14: 00000000ffffffff R15: ffff880500530000
[   91.560473] FS:  00007f7e500c3700(0000) GS:ffff88051ed80000(0000) knlGS:0000000000000000
[   91.560478] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   91.560480] CR2: ffffebe000000620 CR3: 0000000503103000 CR4: 00000000001406e0
[   91.560483] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   91.560487] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   91.560489] Call Trace:
[   91.560530]  amd_powerplay_destroy+0x1c/0x60 [amdgpu]
[   91.560558]  amdgpu_pp_late_fini+0x44/0x60 [amdgpu]
[   91.560575]  amdgpu_fini+0x254/0x490 [amdgpu]
[   91.560593]  amdgpu_device_fini+0x58/0x1b0 [amdgpu]
[   91.560610]  amdgpu_driver_unload_kms+0x4f/0xa0 [amdgpu]
[   91.560622]  drm_dev_unregister+0x3c/0xe0 [drm]
[   91.560638]  amdgpu_pci_remove+0x19/0x30 [amdgpu]
[   91.560643]  pci_device_remove+0x39/0xc0
[   91.560648]  device_release_driver_internal+0x155/0x210
[   91.560651]  driver_detach+0x38/0x70
[   91.560655]  bus_remove_driver+0x4c/0xa0
[   91.560658]  driver_unregister+0x2c/0x40
[   91.560662]  pci_unregister_driver+0x21/0x90
[   91.560689]  amdgpu_exit+0x15/0x406 [amdgpu]
[   91.560694]  SyS_delete_module+0x1a8/0x270
[   91.560698]  ? exit_to_usermode_loop+0x92/0xa0
[   91.560702]  entry_SYSCALL_64_fastpath+0x13/0x94
[   91.560705] RIP: 0033:0x7f7e4fc118e7
[   91.560708] RSP: 002b:00007fff978ca118 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
[   91.560713] RAX: ffffffffffffffda RBX: 000055afe21bc200 RCX: 00007f7e4fc118e7
[   91.560716] RDX: 000000000000000a RSI: 0000000000000800 RDI: 000055afe21bc268
[   91.560719] RBP: 0000000000000003 R08: 0000000000000000 R09: 1999999999999999
[   91.560722] R10: 0000000000000883 R11: 0000000000000206 R12: 00007fff978c9100
[   91.560725] R13: 0000000000000000 R14: 0000000000000000 R15: 000055afe21bc200
[   91.560728] Code: 00 00 00 80 ff 77 00 00 48 bf 00 00 00 00 00 ea ff ff 49 01 da 48 0f 42 05 57 33 bd 00 49 01 c2 49 c1 ea 0c 49 c1 e2 06 49 01 fa <49> 8b 42 20 48 8d 78 ff a8 01 4c 0f 45 d7 49 8b 52 20 48 8d 42
[   91.560759] RIP: kfree+0x57/0x160 RSP: ffffc90003403cc0
[   91.560761] CR2: ffffebe000000620
[   91.560765] ---[ end trace 08a9f3cd82223c1d ]---

Fixes: 1c8638024846 (drm/amd/powerplay: refine powerplay interface.)
Signed-off-by: John Brooks <john@fastquake.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/ttm: Fix use-after-free in ttm_bo_clean_mm

We unref the man->move fence in ttm_bo_clean_mm() and then call
ttm_bo_force_list_clean() which waits on it, except the refcount is now
zero so a warning is generated (or worse):

[149492.279301] refcount_t: increment on 0; use-after-free.
[149492.279309] ------------[ cut here ]------------
[149492.279315] WARNING: CPU: 3 PID: 18726 at lib/refcount.c:150 refcount_inc+0x2b/0x30
[149492.279315] Modules linked in: vhost_net vhost tun x86_pkg_temp_thermal crc32_pclmul ghash_clmulni_intel efivarfs amdgpu(
-) i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm
[149492.279326] CPU: 3 PID: 18726 Comm: rmmod Not tainted 4.12.0-rc5-drm-next-4.13-ttmpatch+ #1
[149492.279326] Hardware name: Gigabyte Technology Co., Ltd. Z97X-UD3H-BK/Z97X-UD3H-BK-CF, BIOS F6 06/17/2014
[149492.279327] task: ffff8804ddfedcc0 task.stack: ffffc90008d20000
[149492.279329] RIP: 0010:refcount_inc+0x2b/0x30
[149492.279330] RSP: 0018:ffffc90008d23c30 EFLAGS: 00010286
[149492.279331] RAX: 000000000000002b RBX: 0000000000000170 RCX: 0000000000000000
[149492.279331] RDX: 0000000000000000 RSI: ffff88051ecccbe8 RDI: ffff88051ecccbe8
[149492.279332] RBP: ffffc90008d23c30 R08: 0000000000000001 R09: 00000000000003ee
[149492.279333] R10: ffffc90008d23bb0 R11: 00000000000003ee R12: ffff88043aaac960
[149492.279333] R13: ffff8805005e28a8 R14: 0000000000000002 R15: ffff88050115e178
[149492.279334] FS:  00007fc540168700(0000) GS:ffff88051ecc0000(0000) knlGS:0000000000000000
[149492.279335] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[149492.279336] CR2: 00007fc3e8654140 CR3: 000000027ba77000 CR4: 00000000001426e0
[149492.279337] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[149492.279337] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[149492.279338] Call Trace:
[149492.279345]  ttm_bo_force_list_clean+0xb9/0x110 [ttm]
[149492.279348]  ttm_bo_clean_mm+0x7a/0xe0 [ttm]
[149492.279375]  amdgpu_ttm_fini+0xc9/0x1f0 [amdgpu]
[149492.279392]  amdgpu_bo_fini+0x12/0x40 [amdgpu]
[149492.279415]  gmc_v7_0_sw_fini+0x32/0x40 [amdgpu]
[149492.279430]  amdgpu_fini+0x2c9/0x490 [amdgpu]
[149492.279445]  amdgpu_device_fini+0x58/0x1b0 [amdgpu]
[149492.279461]  amdgpu_driver_unload_kms+0x4f/0xa0 [amdgpu]
[149492.279470]  drm_dev_unregister+0x3c/0xe0 [drm]
[149492.279485]  amdgpu_pci_remove+0x19/0x30 [amdgpu]
[149492.279487]  pci_device_remove+0x39/0xc0
[149492.279490]  device_release_driver_internal+0x155/0x210
[149492.279491]  driver_detach+0x38/0x70
[149492.279493]  bus_remove_driver+0x4c/0xa0
[149492.279494]  driver_unregister+0x2c/0x40
[149492.279496]  pci_unregister_driver+0x21/0x90
[149492.279520]  amdgpu_exit+0x15/0x406 [amdgpu]
[149492.279523]  SyS_delete_module+0x1a8/0x270
[149492.279525]  ? exit_to_usermode_loop+0x92/0xa0
[149492.279528]  entry_SYSCALL_64_fastpath+0x13/0x94
[149492.279529] RIP: 0033:0x7fc53fcb68e7
[149492.279529] RSP: 002b:00007ffcfbfaabb8 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
[149492.279531] RAX: ffffffffffffffda RBX: 0000563117adb200 RCX: 00007fc53fcb68e7
[149492.279531] RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000563117adb268
[149492.279532] RBP: 0000000000000003 R08: 0000000000000000 R09: 1999999999999999
[149492.279533] R10: 0000000000000883 R11: 0000000000000206 R12: 00007ffcfbfa9ba0
[149492.279533] R13: 0000000000000000 R14: 0000000000000000 R15: 0000563117adb200
[149492.279534] Code: 55 48 89 e5 e8 77 fe ff ff 84 c0 74 02 5d c3 80 3d 40 f2 a4 00 00 75 f5 48 c7 c7 20 3c ca 81 c6 05 30 f2 a4 00 01 e8 91 f0 d7 ff <0f> ff 5d c3 90 55 48 89 fe bf 01 00 00 00 48 89 e5 e8 9f fe ff
[149492.279557] ---[ end trace 2d4e0ffcb66a1016 ]---

Unref the fence *after* waiting for it.

v2: Set man->move to NULL after dropping the last ref (Christian König)

Fixes: aff98ba1fdb8 (drm/ttm: wait for eviction in ttm_bo_force_list_clean)
Signed-off-by: John Brooks <john@fastquake.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/i915: Prevent kernel panic when reading/writing compliance debugfs files, v2.

When reading all debugfs files on a system with DP-MST the kernel panics
on a null pointer dereference because intel_dp is null for a DP-MST
connector. Detect this case and skip those connectors.

Also fix the write for the DP compliance file in the same way.

Changes since v1:
- Fix i915_displayport_test_active_write too. (DK)

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170626081835.24251-1-maarten.lankhorst@linux.intel.com

drm/i915: Hold RPM wakelock while initializing OA buffer

OA buffer initialization involves access to HW registers to set
the OA base, head and tail. Ensure device is awake while setting
these. With this, all oa.ops are covered under RPM and forcewake
wakelock.

Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1498585181-23048-1-git-send-email-sagar.a.kamble@intel.com
Fixes: d79651522e89c ("drm/i915: Enable i915 perf stream for Haswell OA unit")
Cc: <stable@vger.kernel.org> # v4.11+

drm/i915: Update DRIVER_DATE to 20170703

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/amd/amdgpu: move get memory type function from early init to sw init

On PX system, it will get memory type before gpu post , and get unkown type.

Signed-off-by: Jim Qu <Jim.Qu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/cgs: always set reference clock in mode_info

It's relevent regardless of whether there are displays
enabled.  Fixes garbage values for ref clock in powerplay
leading to incorrect fan speed reporting when displays
are disabled.

bug: https://bugs.freedesktop.org/show_bug.cgi?id=101653
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/i915/cnl: Fix the CURSOR_COEFF_MASK used in DDI Vswing Programming

The Cursor Coeff is lower 6 bits in the PORT_TX_DW4 register
and hence the CURSOR_COEFF_MASK should be (0x3F << 0)

Fixes: 04416108ccea ("drm/i915/cnl: Add registers related to voltage
swing sequences.")
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1498785241-21138-1-git-send-email-manasi.d.navare@intel.com

drm/amdgpu: fix vblank_time when displays are off

If the displays are off, set the vblank time to max to make
sure mclk switching is enabled.  Avoid mclk getting set
to high when no displays are attached.

bug: https://bugs.freedesktop.org/show_bug.cgi?id=101528
fixes: 09be4a5219 (drm/amd/powerplay/smu7: add vblank check for mclk switching (v2))
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/i915/cfl: Fix Workarounds.

During the review of Coffee Lake workarounds Mika pointed out
that WaDisableKillLogic and GEN9_DISABLE_OCL_OOB_SUPPRESS_LOGIC
should be removed from CFL and with that I should carry the rv-b.

However when doing the v2 I removed another Workaround that should
remain because although not mentioned by spec the history of hangs
around it advocates on its favor.

On some follow-up patches I continued operating on the wrong
workardound, but Ville noticed that, so here is the fix for the
current CFL code that is upstream already.

Fixes: 46c26662d2f ("drm/i915/cfl: Introduce Coffee Lake workarounds.")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>

drm/amd/powerplay: power value format change for Vega10

Power value is an integer on vega10.

Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx9: support the amdgpu.disable_cu option

This is ported from gfx8.

Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: change PPSMC_MSG_GetCurrPkgPwr for Vega10

To follow up SMU FW 28.35.0.

Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Make amdgpu_cs_parser_init static (v2)

The function is called only once inside the .c file.
v2: update the commit message (Michel)

Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/cs: fix a typo in a comment

Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix the exported always on CU bitmap

Newer asics with 4 SEs are not able to fit the entire bitmask in the
original field, use an array instead.

v2: keep cu_ao_mask for backward compatibility.

Signed-off-by: Flora Cui <Flora.Cui@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx9: gfx_v9_0_enable_gfx_static_mg_power_gating() can be static

Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/psp: upper_32_bits/lower_32_bits for address setup

Rather than casting and shifting.  Fixes sparse cast warnings.

Reviewed-by: Samuel Li <samuel.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay/cz: print message if smc message fails

Helpful in debugging.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix typo in amdgpu_debugfs_test_ib_init

The debugfs interface has calls a function that was evidently
defined under the wrong name in some configurations:

drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:64:12: error: 'amdgpu_debugfs_test_ib_ring_init' used but never defined [-Werror]
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:3803:12: error: 'amdgpu_debugfs_test_ib_init' defined but not used [-Werror=unused-function]

This fixes the function name.

Fixes: 4f0955fcc052 ("drm/amdgpu: export test ib debugfs interface")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable mmhub pg on raven

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add new flag AMD_PG_SUPPORT_MMHUB

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add interface to enable/disable mmhub pg on raven

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add mmhub pg init sequence on raven

MMHub Powergating init sequence.

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: add support for ATOM GFXCLK table v2.

New vbios table format on some boards.

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix the memory corruption on S3

psp->cmd will be used on resume phase, so we can not free it on hw_init.
Otherwise, a memory corruption will be triggered.

Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Tested-by: Xiaojie Yuan <Xiaojie.Yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amdgpu: fix vulkan test performance drop and hang on VI

caused by not program dynamic_cu_mask_addr in the KIQ MQD.

v2: create struct vi_mqd_allocation in FB which will contain
1. PM4 MQD structure.
2. Write Pointer Poll Memory.
3. Read Pointer Report Memory
4. Dynamic CU Mask.
5. Dynamic RB Mask.

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/i915: Avoid undefined behaviour of "u32 >> 32"

When computing a hash for looking up relocation target handles in an
execbuf, we start with a large size for the hashtable and proceed to
halve it until the allocation succeeds. The final attempt is with an
order of 0 (i.e. a single element). This means that we then pass bits=0
to hash_32() which then computes "hash >> (32 - 0)" to lookup the single
element. Right shifting a value by the width of the operand is
undefined, so limit the smallest hash table we use to order 1.

v2: Keep the retry allocation flag for the final pass

Fixes: 4ff4b44cbb70 ("drm/i915: Store a direct lookup from object handle to vma")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170629150425.27508-1-chris@chris-wilson.co.uk

drm/i915: reintroduce VLV/CHV PFI programming power domain workaround

There are still cases on these platforms where an attempt is made to
configure the CDCLK while the power domain is off, like when coming back
from a suspend.  So the workaround below is still needed.

This effectively reverts commit 63ff30442519 ("drm/i915: Nuke the
VLV/CHV PFI programming power domain workaround").

Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101517
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170628210605.4994-1-krisman@collabora.co.uk
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915: Avoid keeping waitboost active for signaling threads

Once a client has requested a waitboost, we keep that waitboost active
until all clients are no longer waiting. This is because we don't
distinguish which waiter deserves the boost. However, with the advent of
fence signaling, the signaler threads appear as waiters to the RPS
interrupt handler. So instead of using a single boolean to track when to
keep the waitboost active, use a counter of all outstanding waitboosted
requests.

At this point, I have removed all vestiges of the rate limiting on
clients. Whilst this means that compositors should remain more fluid,
it also means that boosts are more prevalent. See commit b29c19b64528
("drm/i915: Boost RPS frequency for CPU stalls") for a longer discussion
on the pros and cons of both approaches.

A drawback of this implementation is that it requires constant request
submission to keep the waitboost trimmed (as it is now cancelled when the
request is completed). This will be fine for a busy system, but near
idle the boosts may be kept for longer than desired (effectively tens of
vblanks worstcase) and there is a reliance on rc6 instead.

v2: Remove defunct rps.client_lock

Reported-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170628123548.9236-1-chris@chris-wilson.co.uk

drm/i915: Drop flushing of the object free list/worker from i915_gem_suspend

i915_gem_suspend() is called from all of our finalization paths
(suspend, hibernate, unload). i915_gem_drain_freed_objects() adds an
arbitrary delay as it uses an rcu_barrier() to ensure that there are no
more freed objects in flight, and this delay causes a large amount of
variability in suspend timings. For S3 suspend, we do not need to free
pages as doing so does not impact at all upon the system in its
suspended state, unlike S4 hibernation where we do want the hibernation
image to be as small as possible. Therefore we can forgo waiting inside
i915_gem_suspend(), so long as we ensure that we do cleanup before
unload (see i915_gem_load_cleanup()) and prefer to reap our objects
prior to hibernation (see i915_gem_freeze()).

Removing the rcu_barrier() from i915_gem_suspend() improves S3 latency
by about 30ms on Skylake (ymmv).

Reported-by: David Weinehall <david.weinehall@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170627173731.11566-1-chris@chris-wilson.co.uk
Tested-by: David Weinehall <david.weinehall@linux.intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>

drm/i915: Cancel pending execlists irq handler upon idling

Due to the slight asynchronicity in handling the execlists interrupts
(i.e. we defer the work to a handler that may consume more than one
interrupt event), when the engine is idle we may still have an irq
tasklet queued (especially when it has been deferred to a ksoftirqd).
At the beginning of the tasklet, we assert that we do hold a device
wakeref for the access we are about to perform. This assumes that when
we idle and release the GT wakeref, all execlists work has been
completed (since the elsp tracking says the hw is idle). However, there
may still be a tasklet queued, so as we mark the engine idle, also
cancel any pending tasklet.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170627152510.28589-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

Merge tag 'drm-intel-next-fixes-2017-06-27' of git://anongit.freedesktop.org/git/drm-intel into drm-next

Just three minor fixups for stuff in -next.

* tag 'drm-intel-next-fixes-2017-06-27' of git://anongit.freedesktop.org/git/drm-intel:
  drm/i915: Clear execbuf's vma backpointer upon release
  drm/i915: Pass the right flags to i915_vma_move_to_active()
  drm/i915/cnl: Fix RMW on ddi vswing sequence.

Merge tag 'drm-amdkfd-next-2017-06-25' of git://people.freedesktop.org/~gabbayo/linux into drm-next

amdkfd fixes

* tag 'drm-amdkfd-next-2017-06-25' of git://people.freedesktop.org/~gabbayo/linux:
  drm/amdkfd: Spelling s/apreture/aperture/
  drm/amdkfd: NULL dereference involving create_process()

Merge branch 'etnaviv/next' of https://git.pengutronix.de/git/lst/linux into drm-next

- a fix from Eric for synchronization with etnaviv exported dma-bufs
- thermal throttle support for newer GPU cores
- updated module clock gating to work around GPU errata
- a fix to restore userspace buffer cache performance

* 'etnaviv/next' of https://git.pengutronix.de/git/lst/linux:
  drm/etnaviv: restore ETNA_PREP_NOSYNC behaviour
  drm/etnaviv: implement cooling support for new GPU cores
  drm/etnaviv: update MLCG disables with info from newer Vivante driver
  drm/etnaviv: update common.xml.h
  drm/etnaviv: Expose our reservation object when exporting a dmabuf.

drm/i915: Fix an error checking test

'dma_buf_vmap' returns NULL on error, not an error pointer.

Fixes: 6cca22ede8a4 ("drm/i915: Add some mock tests for dmabuf interop")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: http://patchwork.freedesktop.org/patch/msgid/20170627053854.21152-1-christophe.jaillet@wanadoo.fr
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/selftests: Fix mutex imbalance for igt_render_engine_reset_fallback

Smatch spots:

drivers/gpu/drm/i915/selftests/intel_hangcheck.c:669 igt_render_engine_reset_fallback() error: double unlock 'mutex:&i915->drm.struct_mutex'

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170623131907.24236-1-chris@chris-wilson.co.uk
Reviewed-by: Michel Thierry <michel.thierry@intel.com>

drm/i915: Disable MSI for all pre-gen5

We have pretty clear evidence that MSIs are getting lost on g4x and
somehow the interrupt logic doesn't seem to recover from that state
even if we try hard to clear the IIR.

Disabling IER around the normal IIR clearing in the irq handler isn't
sufficient to avoid this, so the problem really seems to be further
up the interrupt chain. This should guarantee that there's always
an edge if any IIR bits are set after the interrupt handler is done,
which should normally guarantee that the CPU interrupt is generated.
That approach seems to work perfectly on VLV/CHV, but apparently
not on g4x.

MSI is documented to be broken on 965gm at least. The chipset spec
says MSI is defeatured because interrupts can be delayed or lost,
which fits well with what we're seeing on g4x. Previously we've
already disabled GMBUS interrupts on g4x because somehow GMBUS
manages to raise legacy interrupts even when MSI is enabled.

Since there's such widespread MSI breakahge all over in the pre-gen5
land let's just give up on MSI on these platforms.

Seqno reporting might be negatively affected by this since the legcy
interrupts aren't guaranteed to be ordered with the seqno writes,
whereas MSI interrupts may be? But an occasioanlly missed seqno
seems like a small price to pay for generally working interrupts.

Cc: stable@vger.kernel.org
Cc: Diego Viola <diego.viola@gmail.com>
Tested-by: Diego Viola <diego.viola@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101261
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170626203051.28480-1-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915/dp: Remove -1/+1 from t11_t12 for Gen9_LP/CNP case

Now the VBT.seq->t11_t12 value adds 100ms to both Gen9_LP
as well as non Gen9_LP cases so no need to special case
and do -1 during HW readout and +1 during pp_div write
for Gen9_LP/CNP case.

Reviewed-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Suggested-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1498504905-21067-2-git-send-email-manasi.d.navare@intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915/dp: Fix the t11_t12 panel power cycle delay from VBT read

When we read the VBT t11_t12 value for panel power cycle delay,
it is a zero based value so we need to 100ms to that. And then it
needs to be multiplied by 10 to store it in 100usecs unit same as
SW VBT.

v3:
* Add it as part of series
v2:
* Change the VBT value instead of HW readout and pp div (Ville Syrjala)

Reviewed-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1498504905-21067-1-git-send-email-manasi.d.navare@intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

Backmerge tag 'v4.12-rc7' into drm-next

Linux 4.12-rc7

Needed at least rc6 for drm-misc-next-fixes, may as well go to rc7

drm/i915: Clear execbuf's vma backpointer upon release

commit 2889caa92321 ("drm/i915: Eliminate lots of iterations over the
execobjects array") jiggled around the error handling and replace a test
that we cleaned up properly after ourselves with an assertion. That
assertion failed because in the release function (moments after the
assertion) we were indeed forgetting to mark the vma as cleared. The
consequence was when testing an invalid relocation address, we would try
to release the vma twice (following the couple of attempts to verify the
address) and on the second release notice that the first release was
incomplete.

Testcase: igt/gem_reloc_overflow/invalid-address
Fixes: 2889caa92321 ("drm/i915: Eliminate lots of iterations over the execobjects array")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170622104722.2583-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
(cherry picked from commit 51d05e1b29676a0425749a1533b87e3ad3c6f176)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>