GitHub/moto-9609/android_kernel_motorola_exynos9610.git
8 years agonet: smsc911x: Fix register_netdev, phy startup, driver unload ordering
Jeremy Linton [Thu, 1 Sep 2016 20:15:07 +0000 (15:15 -0500)]
net: smsc911x: Fix register_netdev, phy startup, driver unload ordering

Move phy startup/shutdown into the smsc911x_open/stop routines. This
allows the module to be unloaded because phy_connect_direct is no longer
always holding the module use count. This one change also resolves a
number of other problems.

The link status of a downed interface no longer reflects a stale state.
Errors caused by the net device being opened before the mdio/phy was
configured. There is also a potential power savings as the phy's don't
remain powered when the interface isn't running.

Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agonet: smsc911x: Remove multiple exit points from smsc911x_open
Jeremy Linton [Thu, 1 Sep 2016 20:15:06 +0000 (15:15 -0500)]
net: smsc911x: Remove multiple exit points from smsc911x_open

Rework the error handling in smsc911x open in preparation
for the mdio startup being moved here.

Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agol2tp: fix use-after-free during module unload
Sabrina Dubroca [Fri, 2 Sep 2016 08:22:54 +0000 (10:22 +0200)]
l2tp: fix use-after-free during module unload

Tunnel deletion is delayed by both a workqueue (l2tp_tunnel_delete -> wq
 -> l2tp_tunnel_del_work) and RCU (sk_destruct -> RCU ->
l2tp_tunnel_destruct).

By the time l2tp_tunnel_destruct() runs to destroy the tunnel and finish
destroying the socket, the private data reserved via the net_generic
mechanism has already been freed, but l2tp_tunnel_destruct() actually
uses this data.

Make sure tunnel deletion for the netns has completed before returning
from l2tp_exit_net() by first flushing the tunnel removal workqueue, and
then waiting for RCU callbacks to complete.

Fixes: 167eb17e0b17 ("l2tp: create tunnel sockets in the right namespace")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agoipv6: Don't unset flowi6_proto in ipxip6_tnl_xmit()
Eli Cooper [Fri, 26 Aug 2016 15:52:29 +0000 (23:52 +0800)]
ipv6: Don't unset flowi6_proto in ipxip6_tnl_xmit()

Commit 8eb30be0352d0916 ("ipv6: Create ip6_tnl_xmit") unsets
flowi6_proto in ip4ip6_tnl_xmit() and ip6ip6_tnl_xmit().
Since xfrm_selector_match() relies on this info, IPv6 packets
sent by an ip6tunnel cannot be properly selected by their
protocols after removing it. This patch puts flowi6_proto back.

Cc: stable@vger.kernel.org
Fixes: 8eb30be0352d ("ipv6: Create ip6_tnl_xmit")
Signed-off-by: Eli Cooper <elicooper@gmx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agobnx2x: don't reset chip on cleanup if PCI function is offline
Guilherme G. Piccoli [Wed, 31 Aug 2016 15:11:57 +0000 (12:11 -0300)]
bnx2x: don't reset chip on cleanup if PCI function is offline

When PCI error is detected, in some architectures (like PowerPC) a slot
reset is performed - the driver's error handlers are in charge of "disable"
device before the reset, and re-enable it after a successful slot reset.

There are two cases though that another path is taken on the code: if the
slot reset is not successful or if too many errors already happened in the
specific adapter (meaning that possibly the device is experiencing a HW
failure that slot reset is not able to solve), the core PCI error mechanism
(called EEH in PowerPC) will remove the adapter from the system, since it
will consider this as a permanent failure on device. In this case, a path
is taken that leads to bnx2x_chip_cleanup() calling bnx2x_reset_hw(), which
then tries to perform a HW reset on chip. This reset won't succeed since
the HW is in a fault state, which can be seen by multiple messages on
kernel log like below:

bnx2x: [bnx2x_issue_dmae_with_comp:552(eth1)]DMAE timeout!
bnx2x: [bnx2x_write_dmae:600(eth1)]DMAE returned failure -1

After some time, the PCI error mechanism gives up on waiting the driver's
correct removal procedure and forcibly remove the adapter from the system.
We can see soft lockup while core PCI error mechanism is waiting for driver
to accomplish the right removal process.

This patch adds a verification to avoid a chip reset whenever the function
is in PCI error state - since this case is only reached when we have a
device being removed because of a permanent failure, the HW chip reset is
not expected to work fine neither is necessary.

Also, as a minor improvement in error path, we avoid the MCP information dump
in case of non-recoverable PCI error (when adapter is about to be removed),
since it will certainly fail.

Reported-by: Harsha Thyagaraja <hathyaga@in.ibm.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Acked-By: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agorps: flow_dissector: Fix uninitialized flow_keys used in __skb_get_hash possibly
Gao Feng [Wed, 31 Aug 2016 06:15:05 +0000 (14:15 +0800)]
rps: flow_dissector: Fix uninitialized flow_keys used in __skb_get_hash possibly

The original codes depend on that the function parameters are evaluated from
left to right. But the parameter's evaluation order is not defined in C
standard actually.

When flow_keys_have_l4(&keys) is invoked before ___skb_get_hash(skb, &keys,
hashrnd) with some compilers or environment, the keys passed to
flow_keys_have_l4 is not initialized.

Fixes: 6db61d79c1e1 ("flow_dissector: Ignore flow dissector return value from ___skb_get_hash")

Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Gao Feng <fgao@ikuai8.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agotcp: fastopen: fix rcv_wup initialization for TFO server on SYN/data
Neal Cardwell [Tue, 30 Aug 2016 15:55:23 +0000 (11:55 -0400)]
tcp: fastopen: fix rcv_wup initialization for TFO server on SYN/data

Yuchung noticed that on the first TFO server data packet sent after
the (TFO) handshake, the server echoed the TCP timestamp value in the
SYN/data instead of the timestamp value in the final ACK of the
handshake. This problem did not happen on regular opens.

The tcp_replace_ts_recent() logic that decides whether to remember an
incoming TS value needs tp->rcv_wup to hold the latest receive
sequence number that we have ACKed (latest tp->rcv_nxt we have
ACKed). This commit fixes this issue by ensuring that a TFO server
properly updates tp->rcv_wup to match tp->rcv_nxt at the time it sends
a SYN/ACK for the SYN/data.

Reported-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Fixes: 168a8f58059a ("tcp: TCP Fast Open Server - main code path")
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agonet: bridge: don't increment tx_dropped in br_do_proxy_arp
Nikolay Aleksandrov [Tue, 30 Aug 2016 15:44:29 +0000 (17:44 +0200)]
net: bridge: don't increment tx_dropped in br_do_proxy_arp

pskb_may_pull may fail due to various reasons (e.g. alloc failure), but the
skb isn't changed/dropped and processing continues so we shouldn't
increment tx_dropped.

CC: Kyeyoon Park <kyeyoonp@codeaurora.org>
CC: Roopa Prabhu <roopa@cumulusnetworks.com>
CC: Stephen Hemminger <stephen@networkplumber.org>
CC: bridge@lists.linux-foundation.org
Fixes: 958501163ddd ("bridge: Add support for IEEE 802.11 Proxy ARP")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agonetconf: add a notif when settings are created
Nicolas Dichtel [Tue, 30 Aug 2016 08:09:22 +0000 (10:09 +0200)]
netconf: add a notif when settings are created

All changes are notified, but the initial state was missing.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agoipv6: add missing netconf notif when 'all' is updated
Nicolas Dichtel [Tue, 30 Aug 2016 08:09:21 +0000 (10:09 +0200)]
ipv6: add missing netconf notif when 'all' is updated

The 'default' value was not advertised.

Fixes: f3a1bfb11ccb ("rtnl/ipv6: use netconf msg to advertise forwarding status")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agoMerge branch 'thunderx-fixes'
David S. Miller [Thu, 1 Sep 2016 21:50:47 +0000 (14:50 -0700)]
Merge branch 'thunderx-fixes'

Sunil Goutham says:

====================
net: thunderx: Fixes for TSO offload issues

This patch series fixes couple of issues w.r.t HW TSO offload
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agonet: thunderx: Fix for issues with multiple CQEs posted for a TSO packet
Sunil Goutham [Tue, 30 Aug 2016 06:06:27 +0000 (11:36 +0530)]
net: thunderx: Fix for issues with multiple CQEs posted for a TSO packet

On ThunderX 88xx pass 2.x chips when TSO is offloaded to HW,
HW posts a CQE for every TSO segment transmitted. Current code
does handles this, but is prone to issues when segment sizes are
small resulting in SW processing too many CQEs and also at times
frees a SKB which is not yet transmitted.

This patch handles the errata in a different way and eliminates issues
with earlier approach, TSO packet is submitted to HW with post_cqe=0,
so that no CQE is posted upon completion of transmission of TSO packet
but a additional HDR + IMMEDIATE descriptors are added to SQ due to
which a CQE is posted and will have required info to be used while
cleanup in napi. This way only one CQE is posted for a TSO packet.

Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agonet: thunderx: Fix for HW issue while padding TSO packet
Sunil Goutham [Tue, 30 Aug 2016 06:06:26 +0000 (11:36 +0530)]
net: thunderx: Fix for HW issue while padding TSO packet

There is a issue in HW where-in while sending GSO sized pkts
as part of TSO, if pkt len falls below configured min packet
size i.e 60, NIC will zero PAD packet and also updates IP total length.
Hence set this value to lessthan min pkt size of MAC + IP + TCP
headers, BGX will anyway do the padding to transmit 64 byte pkt
including FCS.

Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agoi40e: Fix kernel panic on enable/disable LLDP
Dave Ertman [Tue, 30 Aug 2016 00:38:26 +0000 (17:38 -0700)]
i40e: Fix kernel panic on enable/disable LLDP

If DCB is configured on the link partner switch with an
unsupported traffic class configuration (e.g. non-contiguous TCs),
the driver is flagging DCB as disabled.  But, for future DCB
LLDPDUs, the driver was checking if the interface was DCB capable
instead of enabled.  This was causing a kernel panic when LLDP
was enabled/disabled on the link partner switch.

This patch corrects the situation by having the LLDP event handler
check the correct flag in the pf structure.  It also cleans up the
setting and clearing of the enabled flag for other checks.

Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agoMAINTAINERS: update to working email address
Andy Gospodarek [Mon, 29 Aug 2016 20:51:30 +0000 (16:51 -0400)]
MAINTAINERS: update to working email address

Signed-off-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agoMerge tag 'wireless-drivers-for-davem-2016-08-29' of git://git.kernel.org/pub/scm...
David S. Miller [Thu, 1 Sep 2016 21:11:11 +0000 (14:11 -0700)]
Merge tag 'wireless-drivers-for-davem-2016-08-29' of git://git./linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
wireless-drivers fixes for 4.8

ath9k

* fix regression in client mode beacon configuration
* fix a station pointer which resulted in spurious crashes

mwifiex

* fix large amsdu packets causing firmware hang

brcmfmac

* fix deadlock when removing interface
* fix use of mutex in atomic context
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agotipc: fix random link resets while adding a second bearer
Parthasarathy Bhuvaragan [Thu, 1 Sep 2016 14:22:16 +0000 (16:22 +0200)]
tipc: fix random link resets while adding a second bearer

In a dual bearer configuration, if the second tipc link becomes
active while the first link still has pending nametable "bulk"
updates, it randomly leads to reset of the second link.

When a link is established, the function named_distribute(),
fills the skb based on node mtu (allows room for TUNNEL_PROTOCOL)
with NAME_DISTRIBUTOR message for each PUBLICATION.
However, the function named_distribute() allocates the buffer by
increasing the node mtu by INT_H_SIZE (to insert NAME_DISTRIBUTOR).
This consumes the space allocated for TUNNEL_PROTOCOL.

When establishing the second link, the link shall tunnel all the
messages in the first link queue including the "bulk" update.
As size of the NAME_DISTRIBUTOR messages while tunnelling, exceeds
the link mtu the transmission fails (-EMSGSIZE).

Thus, the synch point based on the message count of the tunnel
packets is never reached leading to link timeout.

In this commit, we adjust the size of name distributor message so that
they can be tunnelled.

Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agotg3: Fix for disallow tx coalescing time to be 0
Ivan Vecera [Thu, 1 Sep 2016 09:28:59 +0000 (11:28 +0200)]
tg3: Fix for disallow tx coalescing time to be 0

The recent commit 087d7a8c9174 "tg3: Fix for diasllow rx coalescing
time to be 0" disallow to set Rx coalescing time to be 0 as this stops
generating interrupts for the incoming packets. I found the zero
Tx coalescing time stops generating interrupts for outgoing packets
as well and fires Tx watchdog later. To avoid this, don't allow to set
Tx coalescing time to 0 and also remove subsequent checks that become
senseless.

Cc: satish.baddipadige@broadcom.com
Cc: siva.kallam@broadcom.com
Cc: michael.chan@broadcom.com
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Acked-by: Siva Reddy Kallam <siva.kallam@broadcom.com>
Acked-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agoqed: fix kzalloc-simple.cocci warnings
Wu Fengguang [Thu, 1 Sep 2016 06:45:12 +0000 (14:45 +0800)]
qed: fix kzalloc-simple.cocci warnings

drivers/net/ethernet/qlogic/qed/qed_dcbx.c:1230:13-20: WARNING: kzalloc should be used for dcbx_info, instead of kmalloc/memset
drivers/net/ethernet/qlogic/qed/qed_dcbx.c:1192:13-20: WARNING: kzalloc should be used for dcbx_info, instead of kmalloc/memset

 Use kzalloc rather than kmalloc followed by memset with 0

 This considers some simple cases that are common and easy to validate
 Note in particular that there are no ...s in the rule, so all of the
 matched code has to be contiguous

Generated by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci

CC: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Acked-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agoMerge branch 'mlxsw-fixes'
David S. Miller [Thu, 1 Sep 2016 16:44:57 +0000 (09:44 -0700)]
Merge branch 'mlxsw-fixes'

Jiri Pirko says:

====================
mlxsw: couple of fixes

Couple of fixes from Ido and myself.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agomlxsw: spectrum: Use existing flood setup when adding VLANs
Ido Schimmel [Thu, 1 Sep 2016 08:37:45 +0000 (10:37 +0200)]
mlxsw: spectrum: Use existing flood setup when adding VLANs

When a VLAN is added on a bridge port we should use the existing unicast
flood configuration of the port instead of assuming it's enabled.

Fixes: 0293038e0c36 ("mlxsw: spectrum: Add support for flood control")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agomlxsw: spectrum: Don't take multiple references on a FID
Ido Schimmel [Thu, 1 Sep 2016 08:37:44 +0000 (10:37 +0200)]
mlxsw: spectrum: Don't take multiple references on a FID

In commit 14d39461b3f4 ("mlxsw: spectrum: Use per-FID struct for the
VLAN-aware bridge") I added a per-FID struct, which member ports can
take a reference on upon VLAN membership configuration.

However, sometimes only the VLAN flags (e.g. egress untagged) are
toggled without changing the VLAN membership. In these cases we
shouldn't take another reference on the FID.

Fixes: 14d39461b3f4 ("mlxsw: spectrum: Use per-FID struct for the VLAN-aware bridge")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agomlxsw: spectrum_router: Fix netevent notifier registration
Jiri Pirko [Thu, 1 Sep 2016 08:37:43 +0000 (10:37 +0200)]
mlxsw: spectrum_router: Fix netevent notifier registration

Currently the notifier is registered for every asic instance, however the
same block. Fix this by moving the registration to module init.

Fixes: c723c735fa6b ("mlxsw: spectrum_router: Periodically update the kernel's neigh table")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agomlxsw: spectrum: Fix error path in mlxsw_sp_module_init
Jiri Pirko [Thu, 1 Sep 2016 08:37:42 +0000 (10:37 +0200)]
mlxsw: spectrum: Fix error path in mlxsw_sp_module_init

Add forgotten notifier unregister.

Fixes: 99724c18fc66 ("mlxsw: spectrum: Introduce support for router interfaces")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agomlxsw: spectrum_router: Fix fib entry update path
Jiri Pirko [Thu, 1 Sep 2016 08:37:41 +0000 (10:37 +0200)]
mlxsw: spectrum_router: Fix fib entry update path

Originally, I expected that there would be needed to call update
operation in case RALUE record action is changed. However, that is not
needed since write operation takes care of that nicely. Remove prepared
construct and always call the write operation.

Fixes: 61c503f976b5 ("mlxsw: spectrum_router: Implement fib4 add/del switchdev obj ops")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agomlxsw: spectrum_router: Fix failure caused by double fib removal from HW
Jiri Pirko [Thu, 1 Sep 2016 08:37:40 +0000 (10:37 +0200)]
mlxsw: spectrum_router: Fix failure caused by double fib removal from HW

In mlxsw we squash tables 254 and 255 together into HW. Kernel adds/dels
/32 ip to/from both 254 and 255. On del path, that causes the same
prefix being removed twice. Fix this by introducing reference counting
for private mlxsw fib entries. That required a bit of code reshuffle.
Also put dev into fib entry key so the same prefix could be represented
once per every router interface.

Fixes: 61c503f976b5 ("mlxsw: spectrum_router: Implement fib4 add/del switchdev obj ops")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agoMerge branch 'qed-fixes'
David S. Miller [Thu, 1 Sep 2016 04:03:47 +0000 (21:03 -0700)]
Merge branch 'qed-fixes'

Sudarsana Reddy Kalluru says:

====================
qed*: dcbx fix series.

The series contains several small fixes for qed* dcbx module.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agoqed: Clear dcbx memory buffers before the usage.
Sudarsana Reddy Kalluru [Mon, 29 Aug 2016 12:29:54 +0000 (08:29 -0400)]
qed: Clear dcbx memory buffers before the usage.

This patch takes care of clearing the uninitialized buffer before using it.
1. pfc pri-enable bitmap need to be cleared before setting the requested
   enable bits. Without this, the un-touched values will be merged with
   requested values and sent to MFW.
2. The data in app-entry field need to be cleared before using it.
3. Clear the output data buffer used in qed_dcbx_query_params().

Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agoqed: Set selection-field while configuring the app entry in ieee mode.
Sudarsana Reddy Kalluru [Mon, 29 Aug 2016 12:29:53 +0000 (08:29 -0400)]
qed: Set selection-field while configuring the app entry in ieee mode.

Management firmware requires the selection-field (SF) to be set for
configuring the application/protocol entry in IEEE mode. Without this
setting, the app entry will be configured incorrectly in MFW.

Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agoqed*: Disallow dcbx configuration for VF interfaces.
Sudarsana Reddy Kalluru [Mon, 29 Aug 2016 12:29:52 +0000 (08:29 -0400)]
qed*: Disallow dcbx configuration for VF interfaces.

Dcbx configuration is not supported for VF interfaces. Hence don't populate
the callbacks for VFs and also fail the dcbx-query for VFs.

Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agokcm: fix a socket double free
WANG Cong [Mon, 29 Aug 2016 04:28:26 +0000 (21:28 -0700)]
kcm: fix a socket double free

Dmitry reported a double free on kcm socket, which could
be easily reproduced by:

#include <unistd.h>
#include <sys/syscall.h>

int main()
{
  int fd = syscall(SYS_socket, 0x29ul, 0x5ul, 0x0ul, 0, 0, 0);
  syscall(SYS_ioctl, fd, 0x89e2ul, 0x20a98000ul, 0, 0, 0);
  return 0;
}

This is because on the error path, after we install
the new socket file, we call sock_release() to clean
up the socket, which leaves the fd pointing to a freed
socket. Fix this by calling sys_close() on that fd
directly.

Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agoMerge branch 'mediatek-fixes'
David S. Miller [Thu, 1 Sep 2016 03:53:49 +0000 (20:53 -0700)]
Merge branch 'mediatek-fixes'

Sean Wang says:

====================
net: ethernet: mediatek: a couple of fixes

a couple of fixes come out from integrating with linux-4.8 rc1
they all are verified and workable on linux-4.8 rc1

Changes since v1:
- usage of loops to work out if all required clock are ready instead
of tedious coding
- remove redundant pinctrl setup that is already done by core driver
thanks for careful and patient reviewing by Andrew Lunn
- splitting distinct changes into the separate patches
- change variable naming from err to ret for readable coding

Changes since v2:
- restore to original clock disabling sequence that is changed
accidentally in the last version
- refine the commit log that would cause misunderstanding what has
been done in the changes
- refine the commit log that would cause footnote losing due to
improper delimiter use

Changes since v3:
- fix git rejects caused by mixing a change from net-next, so
remake the patch set based on the current net branch again.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agonet: ethernet: mediatek: fix error handling inside mtk_mdio_init
Sean Wang [Thu, 1 Sep 2016 02:47:35 +0000 (10:47 +0800)]
net: ethernet: mediatek: fix error handling inside mtk_mdio_init

Return -ENODEV if the MDIO bus is disabled in the device tree.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: John Crispin <john@phrozen.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agonet: ethernet: mediatek: use devm_mdiobus_alloc instead of mdiobus_alloc inside mtk_m...
Sean Wang [Thu, 1 Sep 2016 02:47:34 +0000 (10:47 +0800)]
net: ethernet: mediatek: use devm_mdiobus_alloc instead of mdiobus_alloc inside mtk_mdio_init

a lot of parts in the driver uses devm_* APIs to gain benefits from the
device resource management, so devm_mdiobus_alloc is also used instead
of mdiobus_alloc to have more elegant code flow.

Using common code provided by the devm_* helps to
1) have simplified the code flow as [1] says
2) decrease the risk of incorrect error handling by human
3) only a few drivers used it since it was proposed on linux 3.16,
so just hope to promote for this.

Ref:
[1] https://patchwork.ozlabs.org/patch/344093/

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agonet: ethernet: mediatek: fix the missing of_node_put() after node is used done inside...
Sean Wang [Thu, 1 Sep 2016 02:47:33 +0000 (10:47 +0800)]
net: ethernet: mediatek: fix the missing of_node_put() after node is used done inside mtk_mdio_init

This patch adds the missing of_node_put() after finishing the usage
of of_get_child_by_name.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: John Crispin <john@phrozen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agonet: ethernet: mediatek: fix issue of driver removal with interface is up
Sean Wang [Thu, 1 Sep 2016 02:47:32 +0000 (10:47 +0800)]
net: ethernet: mediatek: fix issue of driver removal with interface is up

mtk_stop() must be called to stop for freeing DMA
resources acquired and restoring state changed by mtk_open()
firstly when module removal.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agonet: ethernet: mediatek: fix logic unbalance between probe and remove
Sean Wang [Thu, 1 Sep 2016 02:47:31 +0000 (10:47 +0800)]
net: ethernet: mediatek: fix logic unbalance between probe and remove

original mdio_cleanup is not in the symmetric place against where
mdio_init is, so relocate mdio_cleanup to the right one.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: John Crispin <john@phrozen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agonet: ethernet: mediatek: remove redundant free_irq for devm_request_irq allocated irq
Sean Wang [Thu, 1 Sep 2016 02:47:30 +0000 (10:47 +0800)]
net: ethernet: mediatek: remove redundant free_irq for devm_request_irq allocated irq

these irqs are not used for shared irq and disabled during ethernet stops.
irq requested by devm_request_irq is safe to be freed automatically on
driver detach.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: John Crispin <john@phrozen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agonet: ethernet: mediatek: fix API usage with skb_free_frag
Sean Wang [Thu, 1 Sep 2016 02:47:29 +0000 (10:47 +0800)]
net: ethernet: mediatek: fix API usage with skb_free_frag

use skb_free_frag() instead of legacy put_page()

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: John Crispin <john@phrozen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agonet: ethernet: mediatek: fix incorrect return value of devm_clk_get with EPROBE_DEFER
Sean Wang [Thu, 1 Sep 2016 02:47:28 +0000 (10:47 +0800)]
net: ethernet: mediatek: fix incorrect return value of devm_clk_get with EPROBE_DEFER

1) If the return value of devm_clk_get is EPROBE_DEFER, we should
defer probing the driver. The change is verified and works based
on 4.8-rc1 staying with the latest clk-next code for MT7623.
2) Changing with the usage of loops to work out if all clocks
required are fine

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agonet: ethernet: mediatek: fix fails from TX housekeeping due to incorrect port setup
Sean Wang [Thu, 1 Sep 2016 02:47:27 +0000 (10:47 +0800)]
net: ethernet: mediatek: fix fails from TX housekeeping due to incorrect port setup

which net device the SKB is complete for depends on the forward port
on txd4 on the corresponding TX descriptor, but the information isn't
set up well in case of  SKB fragments that would lead to watchdog timeout
from the upper layer, so fix it up.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: John Crispin <john@phrozen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agobridge: re-introduce 'fix parsing of MLDv2 reports'
Davide Caratti [Wed, 31 Aug 2016 12:16:44 +0000 (14:16 +0200)]
bridge: re-introduce 'fix parsing of MLDv2 reports'

commit bc8c20acaea1 ("bridge: multicast: treat igmpv3 report with
INCLUDE and no sources as a leave") seems to have accidentally reverted
commit 47cc84ce0c2f ("bridge: fix parsing of MLDv2 reports"). This
commit brings back a change to br_ip6_multicast_mld2_report() where
parsing of MLDv2 reports stops when the first group is successfully
added to the MDB cache.

Fixes: bc8c20acaea1 ("bridge: multicast: treat igmpv3 report with INCLUDE and no sources as a leave")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
David S. Miller [Wed, 31 Aug 2016 05:02:09 +0000 (22:02 -0700)]
Merge git://git./pub/scm/linux/kernel/git/pablo/nf

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for your net tree,
they are:

1) Allow nf_tables reject expression from input, forward and output hooks,
   since only there the routing information is available, otherwise we crash.

2) Fix unsafe list iteration when flushing timeout and accouting objects.

3) Fix refcount leak on timeout policy parsing failure.

4) Unlink timeout object for unconfirmed conntracks too

5) Missing validation of pkttype mangling from bridge family.

6) Fix refcount leak on ebtables on second lookup for the specific
   bridge match extension, this patch from Sabrina Dubroca.

7) Remove unnecessary ip_hdr() in nf_tables_netdev family.

Patches from 1-5 and 7 from Liping Zhang.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agoMerge tag 'mac80211-for-davem-2016-08-30' of git://git.kernel.org/pub/scm/linux/kerne...
David S. Miller [Wed, 31 Aug 2016 04:34:48 +0000 (21:34 -0700)]
Merge tag 'mac80211-for-davem-2016-08-30' of git://git./linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
Three little fixes:
 * revert a recent wext patch, which Ben Hutchings noticed was
   wrong, and it turns out not to be necessary for any driver

 * fix an infinite loop that can occur under certain conditions
   in mac80211's TDLS code (depending on regulatory information)

 * add a cfg80211_get_station() static inline when cfg80211 isn't
   built, to allow other modules to not have to depend on it for it
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agonetfilter: nf_tables_netdev: remove redundant ip_hdr assignment
Liping Zhang [Sun, 28 Aug 2016 08:59:52 +0000 (16:59 +0800)]
netfilter: nf_tables_netdev: remove redundant ip_hdr assignment

We have already use skb_header_pointer to get the ip header pointer,
so there's no need to use ip_hdr again. Moreover, in NETDEV INGRESS
hook, ip header maybe not linear, so use ip_hdr is not appropriate,
remove it.

Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
8 years agocfg80211: Add stub for cfg80211_get_station()
Linus Lüssing [Fri, 19 Aug 2016 20:02:48 +0000 (22:02 +0200)]
cfg80211: Add stub for cfg80211_get_station()

This allows modules using this function (currently: batman-adv) to
compile even if cfg80211 is not built at all, thus relaxing
dependencies.

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
8 years agomac80211: TDLS: don't require beaconing for AP BW
Arik Nemtsov [Mon, 29 Aug 2016 09:37:35 +0000 (12:37 +0300)]
mac80211: TDLS: don't require beaconing for AP BW

Stop downgrading TDLS chandef when reaching the AP BW. The AP provides
the necessary regulatory protection in this case.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=153961, which
reported an infinite loop here.

Reported-by: Kamil Toman <kamil.toman@gmail.com>
Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
8 years agoMerge tag 'hwmon-for-linus-v4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Tue, 30 Aug 2016 02:12:35 +0000 (19:12 -0700)]
Merge tag 'hwmon-for-linus-v4.8-rc5' of git://git./linux/kernel/git/groeck/linux-staging

Pull hwmon fix from Guenter Roeck:
 "Add missing sysfs attribute group terminator to it87 driver"

* tag 'hwmon-for-linus-v4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (it87) Add missing sysfs attribute group terminator

8 years agoMerge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Mon, 29 Aug 2016 19:37:11 +0000 (12:37 -0700)]
Merge tag 'ext4_for_linus_stable' of git://git./linux/kernel/git/tytso/ext4

Pull ext4 fixes from Ted Ts'o:
 "Fix bugs that could cause kernel deadlocks or file system corruption
  while moving xattrs to expand the extended inode.

  Also add some sanity checks to the block group descriptors to make
  sure we don't end up overwriting the superblock"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: avoid deadlock when expanding inode size
  ext4: properly align shifted xattrs when expanding inodes
  ext4: fix xattr shifting when expanding inodes part 2
  ext4: fix xattr shifting when expanding inodes
  ext4: validate that metadata blocks do not overlap superblock
  ext4: reserve xattr index for the Hurd

8 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Mon, 29 Aug 2016 19:29:13 +0000 (12:29 -0700)]
Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

 1) Segregate namespaces properly in conntrack dumps, from Liping Zhang.

 2) tcp listener refcount fix in netfilter tproxy, from Eric Dumazet.

 3) Fix timeouts in qed driver due to xmit_more, from Yuval Mintz.

 4) Fix use-after-free in tcp_xmit_retransmit_queue().

 5) Userspace header fixups (use of __u32, missing includes, etc.) from
    Mikko Rapeli.

 6) Further refinements to fragmentation wrt gso and tunnels, from
    Shmulik Ladkani.

 7) Trigger poll correctly for zero length UDP packets, from Eric
    Dumazet.

 8) TCP window scaling fix, also from Eric Dumazet.

 9) SLAB_DESTROY_BY_RCU is not relevant any more for UDP sockets.

10) Module refcount leak in qdisc_create_dflt(), from Eric Dumazet.

11) Fix deadlock in cp_rx_poll() of 8139cp driver, from Gao Feng.

12) Memory leak in rhashtable's alloc_bucket_locks(), from Eric Dumazet.

13) Add new device ID to alx driver, from Owen Lin.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (83 commits)
  Add Killer E2500 device ID in alx driver.
  net: smc91x: fix SMC accesses
  Documentation: networking: dsa: Remove platform device TODO
  net/mlx5: Increase number of ethtool steering priorities
  net/mlx5: Add error prints when validate ETS failed
  net/mlx5e: Fix memory leak if refreshing TIRs fails
  net/mlx5e: Add ethtool counter for TX xmit_more
  net/mlx5e: Fix ethtool -g/G rx ring parameter report with striding RQ
  net/mlx5e: Don't wait for SQ completions on close
  net/mlx5e: Don't post fragmented MPWQE when RQ is disabled
  net/mlx5e: Don't wait for RQ completions on close
  net/mlx5e: Limit UMR length to the device's limitation
  rhashtable: fix a memory leak in alloc_bucket_locks()
  sfc: fix potential stack corruption from running past stat bitmask
  team: loadbalance: push lacpdus to exact delivery
  net: hns: dereference ppe_cb->ppe_common_cb if it is non-null
  8139cp: Fix one possible deadloop in cp_rx_poll
  i40e: Change some init flow for the client
  Revert "phy: IRQ cannot be shared"
  net: dsa: bcm_sf2: Fix race condition while unmasking interrupts
  ...

8 years agoMerge tag 'platform-drivers-x86-v4.8-4' of git://git.infradead.org/users/dvhart/linux...
Linus Torvalds [Mon, 29 Aug 2016 19:20:22 +0000 (12:20 -0700)]
Merge tag 'platform-drivers-x86-v4.8-4' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86

Pull x86 platform driver fixes from Darren Hart:
 "Remove module related code from two drivers that are only configurable
  as built-in: intel_pmic_gpio and platform/olpc"

* tag 'platform-drivers-x86-v4.8-4' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
  intel_pmic_gpio: Make explicitly non-modular
  platform/olpc: Make ec explicitly non-modular

8 years agoMerge tag 'powerpc-4.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc...
Linus Torvalds [Mon, 29 Aug 2016 19:12:15 +0000 (12:12 -0700)]
Merge tag 'powerpc-4.8-4' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Ben Herrenschmidt:
 "This was meant to be sent early last week, but I has a change pending
  on one of the fixes and other things made me forget all about.  Ugh.

  We have some misc fixes for powerpc 4.8.  Some trivial bits and some
  regressions, and a trivial cleanup or two that I saw no point in
  letting rot in patchwork"

* tag 'powerpc-4.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc: signals: Discard transaction state from signal frames
  powerpc/powernv : Drop reference added by kset_find_obj()
  powerpc/tm: do not use r13 for tabort_syscall
  powerpc: move hmi.c to arch/powerpc/kvm/
  powerpc: sysdev: cpm: fix gpio save_regs functions
  powerpc/pseries: PACA save area fix for MCE vs MCE
  powerpc/pseries: PACA save area fix for general exception vs MCE
  powerpc/prom: Fix sub-processor option passed to ibm, client-architecture-support
  powerpc, hotplug: Avoid to touch non-existent cpumasks.
  powerpc: migrate exception table users off module.h and onto extable.h
  powerpc/powernv/pci: fix iterator signedness
  powerpc/pseries: use pci_host_bridge.release_fn() to kfree(phb)
  cxl: use pcibios_free_controller_deferred() when removing vPHBs
  powerpc: mpc8349emitx: Delete unnecessary assignment for the field "owner"
  powerpc/512x: Delete unnecessary assignment for the field "owner"
  drivers/macintosh: Delete owner assignment
  powerpc: cputhreads: Add missing include file

8 years agoMerge ath-current from ath.git
Kalle Valo [Mon, 29 Aug 2016 18:39:04 +0000 (21:39 +0300)]
Merge ath-current from ath.git

ath.git fixes for 4.8. Major changes:

ath9k

* fix regression in client mode beacon configuration
* fix a station pointer which resulted in spurious crashes

8 years agohwmon: (it87) Add missing sysfs attribute group terminator
Jean Delvare [Mon, 29 Aug 2016 11:18:23 +0000 (13:18 +0200)]
hwmon: (it87) Add missing sysfs attribute group terminator

Attribute array it87_attributes_in lacks its NULL terminator,
causing random behavior when operating on the attribute group.

Fixes: 52929715634a ("hwmon: (it87) Use is_visible for voltage sensors")
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
8 years agointel_pmic_gpio: Make explicitly non-modular
Paul Gortmaker [Mon, 15 Aug 2016 22:24:59 +0000 (18:24 -0400)]
intel_pmic_gpio: Make explicitly non-modular

The Kconfig entry controlling compilation of this code is:

drivers/platform/x86/Kconfig:config GPIO_INTEL_PMIC
drivers/platform/x86/Kconfig:   bool "Intel PMIC GPIO support"

...meaning that it currently is not being built as a module by anyone.

Lets remove the couple traces of modular infrastructure use, so that
when reading the driver there is no doubt it is builtin-only.

We delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.

We don't replace module.h with init.h since the file already has that.

Cc: Alek Du <alek.du@intel.com>
Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
8 years agoplatform/olpc: Make ec explicitly non-modular
Paul Gortmaker [Mon, 15 Aug 2016 22:25:17 +0000 (18:25 -0400)]
platform/olpc: Make ec explicitly non-modular

The Kconfig entry controlling compilation of this code is:

arch/x86/Kconfig:config OLPC
arch/x86/Kconfig:       bool "One Laptop Per Child support"

...meaning that it currently is not being built as a module by anyone.

Lets remove the couple traces of modular infrastructure use, so that
when reading the driver there is no doubt it is builtin-only.

We delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.

Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
8 years agoAdd Killer E2500 device ID in alx driver.
Owen Lin [Fri, 26 Aug 2016 05:49:09 +0000 (13:49 +0800)]
Add Killer E2500 device ID in alx driver.

Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agonet: smc91x: fix SMC accesses
Russell King [Sat, 27 Aug 2016 16:33:03 +0000 (17:33 +0100)]
net: smc91x: fix SMC accesses

Commit b70661c70830 ("net: smc91x: use run-time configuration on all ARM
machines") broke some ARM platforms through several mistakes.  Firstly,
the access size must correspond to the following rule:

(a) at least one of 16-bit or 8-bit access size must be supported
(b) 32-bit accesses are optional, and may be enabled in addition to
    the above.

Secondly, it provides no emulation of 16-bit accesses, instead blindly
making 16-bit accesses even when the platform specifies that only 8-bit
is supported.

Reorganise smc91x.h so we can make use of the existing 16-bit access
emulation already provided - if 16-bit accesses are supported, use
16-bit accesses directly, otherwise if 8-bit accesses are supported,
use the provided 16-bit access emulation.  If neither, BUG().  This
exactly reflects the driver behaviour prior to the commit being fixed.

Since the conversion incorrectly cut down the available access sizes on
several platforms, we also need to go through every platform and fix up
the overly-restrictive access size: Arnd assumed that if a platform can
perform 32-bit, 16-bit and 8-bit accesses, then only a 32-bit access
size needed to be specified - not so, all available access sizes must
be specified.

This likely fixes some performance regressions in doing this: if a
platform does not support 8-bit accesses, 8-bit accesses have been
emulated by performing a 16-bit read-modify-write access.

Tested on the Intel Assabet/Neponset platform, which supports only 8-bit
accesses, which was broken by the original commit.

Fixes: b70661c70830 ("net: smc91x: use run-time configuration on all ARM machines")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agoDocumentation: networking: dsa: Remove platform device TODO
Florian Fainelli [Sat, 27 Aug 2016 22:34:20 +0000 (15:34 -0700)]
Documentation: networking: dsa: Remove platform device TODO

Since commit 83c0afaec7b7 ("net: dsa: Add new binding implementation"),
the shortcomings of the dsa platform device have been addressed, remove
that TODO item.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agoMerge branch 'mlx5-series'
David S. Miller [Mon, 29 Aug 2016 03:24:24 +0000 (23:24 -0400)]
Merge branch 'mlx5-series'

Saeed Mahameed says:

====================
Mellanox 100G mlx5 fixes 2016-08-29

This series contains some bug fixes for the mlx5 core and mlx5
ethernet driver.

From Saeed, Fix UMR to consider hardware translation table field
size limitation when calculating the maximum number of MTTs required
by the driver.  Three patches to speed-up netdevice close time by
serializing channel (SQs & RQs) destruction rather than issuing and
waiting for hardware interrupts to free them.

From Eran, Fix ethtool ring parameter reporting for striding RQ layout.
Add error prints on ETS validation failure.

From Kamal, Fix memory leak on error flow.

From Maor, Fix ethtool steering priorities number.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agonet/mlx5: Increase number of ethtool steering priorities
Maor Gottlieb [Sun, 28 Aug 2016 22:13:50 +0000 (01:13 +0300)]
net/mlx5: Increase number of ethtool steering priorities

Ethtool has 11 flow tables, each flow table has its own priority.
Increase the number of priorities to be aligned with the number of flow
tables.

Fixes: 1174fce8d141 ('net/mlx5e: Support l3/l4 flow type specs in ethtool flow steering')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agonet/mlx5: Add error prints when validate ETS failed
Eran Ben Elisha [Sun, 28 Aug 2016 22:13:49 +0000 (01:13 +0300)]
net/mlx5: Add error prints when validate ETS failed

Upon set ETS failure due to user invalid input, add error prints to
specify the exact error to the user.

Fixes: cdcf11212b22 ('net/mlx5e: Validate BW weight values of ETS')
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agonet/mlx5e: Fix memory leak if refreshing TIRs fails
Kamal Heib [Sun, 28 Aug 2016 22:13:48 +0000 (01:13 +0300)]
net/mlx5e: Fix memory leak if refreshing TIRs fails

Free 'in' command object also when mlx5_core_modify_tir fails.

Fixes: 724b2aa15126 ("net/mlx5e: TIRs management refactoring")
Signed-off-by: Kamal Heib <kamalh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agonet/mlx5e: Add ethtool counter for TX xmit_more
Tariq Toukan [Sun, 28 Aug 2016 22:13:47 +0000 (01:13 +0300)]
net/mlx5e: Add ethtool counter for TX xmit_more

Add a counter in ethtool for the number of times that
TX xmit_more was used.

Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agonet/mlx5e: Fix ethtool -g/G rx ring parameter report with striding RQ
Eran Ben Elisha [Sun, 28 Aug 2016 22:13:46 +0000 (01:13 +0300)]
net/mlx5e: Fix ethtool -g/G rx ring parameter report with striding RQ

The driver RQ has two possible configurations: striding RQ and
non-striding RQ.  Until this patch, the driver always reported the
number of hardware WQEs (ring descriptors). For non striding RQ
configuration, this was OK since we have one WQE per pending packet
For striding RQ, multiple packets can fit into one WQE. For better
user experience we normalize the rx_pending parameter (size of wqe/mtu)
as the average ring size in case of striding RQ.

Fixes: 461017cb006a ('net/mlx5e: Support RX multi-packet WQE ...')
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agonet/mlx5e: Don't wait for SQ completions on close
Saeed Mahameed [Sun, 28 Aug 2016 22:13:45 +0000 (01:13 +0300)]
net/mlx5e: Don't wait for SQ completions on close

Instead of asking the firmware to flush the SQ (Send Queue) via
asynchronous completions when moved to error, we handle SQ flush
manually (mlx5e_free_tx_descs) same as we did when SQ flush got
timed out or on tx_timeout.

This will reduce SQs flush time and speedup interface down procedure.

Moved mlx5e_free_tx_descs to the end of en_tx.c for tx
critical code locality.

Fixes: 29429f3300a3 ('net/mlx5e: Timeout if SQ doesn't flush during close')
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agonet/mlx5e: Don't post fragmented MPWQE when RQ is disabled
Saeed Mahameed [Sun, 28 Aug 2016 22:13:44 +0000 (01:13 +0300)]
net/mlx5e: Don't post fragmented MPWQE when RQ is disabled

ICO (Internal control operations) SQ (Send Queue) is closed/disabled
after RQ (Receive Queue).  After RQ is closed an ICO SQ completion
might post a fragmented MPWQE (Multi Packet Work Queue Element) into
that RQ.

As on regular RQ post, check if we are allowed to post to that
RQ (RQ is enabled). Cleanup in-progress UMR MPWQE on mlx5e_free_rx_descs
if needed.

Fixes: bc77b240b3c5 ('net/mlx5e: Add fragmented memory support for RX multi packet WQE')
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agonet/mlx5e: Don't wait for RQ completions on close
Saeed Mahameed [Sun, 28 Aug 2016 22:13:43 +0000 (01:13 +0300)]
net/mlx5e: Don't wait for RQ completions on close

This will significantly reduce receive queue flush time on interface
down.

Instead of asking the firmware to flush the RQ (Receive Queue) via
asynchronous completions when moved to error, we handle RQ flush
manually (mlx5e_free_rx_descs) same as we did when RQ flush got timed
out.

This will reduce RQs flush time and speedup interface down procedure
(ifconfig down) from 6 sec to 0.3 sec on a 48 cores system.

Moved mlx5e_free_rx_descs en_main.c where it is needed, to keep en_rx.c
free form non critical data path code for better code locality.

Fixes: 6cd392a082de ('net/mlx5e: Handle RQ flush in error cases')
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agonet/mlx5e: Limit UMR length to the device's limitation
Saeed Mahameed [Sun, 28 Aug 2016 22:13:42 +0000 (01:13 +0300)]
net/mlx5e: Limit UMR length to the device's limitation

ConnectX-4 UMR (User Memory Region) MTT translation table offset in WQE
is limited to U16_MAX, before this patch we ignored that limitation and
requested the maximum possible UMR translation length that the netdev
might need (MAX channels * MAX pages per channel).
In case of a system with #cores > 32 and when linear WQE allocation fails,
falling back to using UMR WQEs will cause the RQ (Receive Queue) to get
stuck.

Here we limit UMR length to min(U16_MAX, max required pages) (while
considering the required alignments) on driver load, by default U16_MAX is
sufficient since the default RX rings value guarantees that we are in
range, dynamically (on set_ringparam/set_channels) we will check if the
new required UMR length (num mtts) is still in range, if not, fail the
request.

Fixes: bc77b240b3c5 ('net/mlx5e: Add fragmented memory support for RX multi packet WQE')
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agopowerpc: signals: Discard transaction state from signal frames
Cyril Bur [Tue, 23 Aug 2016 00:46:17 +0000 (10:46 +1000)]
powerpc: signals: Discard transaction state from signal frames

Userspace can begin and suspend a transaction within the signal
handler which means they might enter sys_rt_sigreturn() with the
processor in suspended state.

sys_rt_sigreturn() wants to restore process context (which may have
been in a transaction before signal delivery). To do this it must
restore TM SPRS. To achieve this, any transaction initiated within the
signal frame must be discarded in order to be able to restore TM SPRs
as TM SPRs can only be manipulated non-transactionally..
>From the PowerPC ISA:
  TM Bad Thing Exception [Category: Transactional Memory]
   An attempt is made to execute a mtspr targeting a TM register in
   other than Non-transactional state.

Not doing so results in a TM Bad Thing:
[12045.221359] Kernel BUG at c000000000050a40 [verbose debug info unavailable]
[12045.221470] Unexpected TM Bad Thing exception at c000000000050a40 (msr 0x201033)
[12045.221540] Oops: Unrecoverable exception, sig: 6 [#1]
[12045.221586] SMP NR_CPUS=2048 NUMA PowerNV
[12045.221634] Modules linked in: xt_CHECKSUM iptable_mangle ipt_MASQUERADE
 nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4
 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 xt_tcpudp bridge stp llc ebtable_filter
 ebtables ip6table_filter ip6_tables iptable_filter ip_tables x_tables kvm_hv kvm
 uio_pdrv_genirq ipmi_powernv uio powernv_rng ipmi_msghandler autofs4 ses enclosure
 scsi_transport_sas bnx2x ipr mdio libcrc32c
[12045.222167] CPU: 68 PID: 6178 Comm: sigreturnpanic Not tainted 4.7.0 #34
[12045.222224] task: c0000000fce38600 ti: c0000000fceb4000 task.ti: c0000000fceb4000
[12045.222293] NIP: c000000000050a40 LR: c0000000000163bc CTR: 0000000000000000
[12045.222361] REGS: c0000000fceb7ac0 TRAP: 0700   Not tainted (4.7.0)
[12045.222418] MSR: 9000000300201033 <SF,HV,ME,IR,DR,RI,LE,TM[SE]> CR: 28444280  XER: 20000000
[12045.222625] CFAR: c0000000000163b8 SOFTE: 0 PACATMSCRATCH: 900000014280f033
GPR00: 01100000b8000001 c0000000fceb7d40 c00000000139c100 c0000000fce390d0
GPR04: 900000034280f033 0000000000000000 0000000000000000 0000000000000000
GPR08: 0000000000000000 b000000000001033 0000000000000001 0000000000000000
GPR12: 0000000000000000 c000000002926400 0000000000000000 0000000000000000
GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR24: 0000000000000000 00003ffff98cadd0 00003ffff98cb470 0000000000000000
GPR28: 900000034280f033 c0000000fceb7ea0 0000000000000001 c0000000fce390d0
[12045.223535] NIP [c000000000050a40] tm_restore_sprs+0xc/0x1c
[12045.223584] LR [c0000000000163bc] tm_recheckpoint+0x5c/0xa0
[12045.223630] Call Trace:
[12045.223655] [c0000000fceb7d80] [c000000000026e74] sys_rt_sigreturn+0x494/0x6c0
[12045.223738] [c0000000fceb7e30] [c0000000000092e0] system_call+0x38/0x108
[12045.223806] Instruction dump:
[12045.223841] 7c800164 4e800020 7c0022a6 f80304a8 7c0222a6 f80304b0 7c0122a6 f80304b8
[12045.223955] 4e800020 e80304a8 7c0023a6 e80304b0 <7c0223a6e80304b8 7c0123a6 4e800020
[12045.224074] ---[ end trace cb8002ee240bae76 ]---

It isn't clear exactly if there is really a use case for userspace
returning with a suspended transaction, however, doing so doesn't (on
its own) constitute a bad frame. As such, this patch simply discards
the transactional state of the context calling the sigreturn and
continues.

Reported-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Tested-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Reviewed-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Acked-by: Simon Guo <wei.guo.simon@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
8 years agopowerpc/powernv : Drop reference added by kset_find_obj()
Mukesh Ojha [Mon, 22 Aug 2016 06:47:44 +0000 (12:17 +0530)]
powerpc/powernv : Drop reference added by kset_find_obj()

In a situation, where Linux kernel gets notified about duplicate error log
from OPAL, it is been observed that kernel fails to remove sysfs entries
(/sys/firmware/opal/elog/0xXXXXXXXX) of such error logs. This is because,
we currently search the error log/dump kobject in the kset list via
'kset_find_obj()' routine. Which eventually increment the reference count
by one, once it founds the kobject.

So, unless we decrement the reference count by one after it found the kobject,
we would not be able to release the kobject properly later.

This patch adds the 'kobject_put()' which was missing earlier.

Signed-off-by: Mukesh Ojha <mukesh02@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Reviewed-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
8 years agopowerpc/tm: do not use r13 for tabort_syscall
Nicholas Piggin [Mon, 25 Jul 2016 04:26:51 +0000 (14:26 +1000)]
powerpc/tm: do not use r13 for tabort_syscall

tabort_syscall runs with RI=1, so a nested recoverable machine
check will load the paca into r13 and overwrite what we loaded
it with, because exceptions returning to privileged mode do not
restore r13.

Fixes: b4b56f9ecab4 (powerpc/tm: Abort syscalls in active transactions)
Cc: stable@vger.kernel.org
Signed-off-by: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
8 years agoLinux 4.8-rc4
Linus Torvalds [Sun, 28 Aug 2016 22:04:33 +0000 (15:04 -0700)]
Linux 4.8-rc4

8 years agoMerge tag 'drm-fixes-for-4.8-rc4' of git://people.freedesktop.org/~airlied/linux
Linus Torvalds [Sun, 28 Aug 2016 21:31:36 +0000 (14:31 -0700)]
Merge tag 'drm-fixes-for-4.8-rc4' of git://people.freedesktop.org/~airlied/linux

Pull drm fixes from Dave Airlie:
 "A bunch of fixes covering i915, amdgpu, one tegra and some core DRM
  ones.  Nothing too strange at this point"

* tag 'drm-fixes-for-4.8-rc4' of git://people.freedesktop.org/~airlied/linux: (21 commits)
  drm/atomic: Don't potentially reset color_mgmt_changed on successive property updates.
  drm: Protect fb_defio in drivers with CONFIG_KMS_FBDEV_EMULATION
  drm/amdgpu: skip TV/CV in display parsing
  drm/amdgpu: avoid a possible array overflow
  drm/amdgpu: fix lru size grouping v2
  drm/tegra: dsi: Enhance runtime power management
  drm/i915: Fix botched merge that downgrades CSR versions.
  drm/i915/skl: Ensure pipes with changed wms get added to the state
  drm/i915/gen9: Only copy WM results for changed pipes to skl_hw
  drm/i915/skl: Add support for the SAGV, fix underrun hangs
  drm/i915/gen6+: Interpret mailbox error flags
  drm/i915: Reattach comment, complete type specification
  drm/i915: Unconditionally flush any chipset buffers before execbuf
  drm/i915/gen9: Drop invalid WARN() during data rate calculation
  drm/i915/gen9: Initialize intel_state->active_crtcs during WM sanitization (v2)
  drm: Reject page_flip for !DRIVER_MODESET
  drm/amdgpu: fix timeout value check in amd_sched_job_recovery
  drm/amdgpu: fix sdma_v2_4_ring_test_ib
  drm/amdgpu: fix amdgpu_move_blit on 32bit systems
  drm/radeon: fix radeon_move_blit on 32bit systems
  ...

8 years agodrm/atomic: Don't potentially reset color_mgmt_changed on successive property updates.
Mario Kleiner [Fri, 26 Aug 2016 23:02:28 +0000 (01:02 +0200)]
drm/atomic: Don't potentially reset color_mgmt_changed on successive property updates.

Due to assigning the 'replaced' value instead of or'ing it,
if drm_atomic_crtc_set_property() gets called multiple times,
the last call will define the color_mgmt_changed flag, so
a non-updating call to a property can reset the flag and
prevent actual hw state updates required by preceding
property updates.

Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: <stable@vger.kernel.org> # v4.6+
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
8 years agoMerge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 28 Aug 2016 17:02:23 +0000 (10:02 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Thomas Gleixner:
 "A few fixes from the perf departement

   - prevent a imbalanced preemption disable in the events teardown code
   - prevent out of bound acces in perf userspace
   - make perf tools compile with UCLIBC again
   - a fix for the userspace unwinder utility"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Use this_cpu_ptr() when stopping AUX events
  perf evsel: Do not access outside hw cache name arrays
  tools lib: Reinstate strlcpy() header guard with __UCLIBC__
  perf unwind: Use addr_location::addr instead of ip for entries

8 years agoMerge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 28 Aug 2016 17:00:21 +0000 (10:00 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fix from Thomas Gleixner:
 "A single bugfix to prevent irq remapping when the ioapic is disabled"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/apic: Do not init irq remapping if ioapic is disabled

8 years agoMerge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 28 Aug 2016 16:52:40 +0000 (09:52 -0700)]
Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull irq fixes from Thomas Gleixner:
 "This lot provides:

   - plug a hotplug race in the new affinity infrastructure
   - a fix for the trigger type of chained interrupts
   - plug a potential memory leak in the core code
   - a few fixes for ARM and MIPS GICs"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/mips-gic: Implement activate op for device domain
  irqchip/mips-gic: Cleanup chip and handler setup
  genirq/affinity: Use get/put_online_cpus around cpumask operations
  genirq: Fix potential memleak when failing to get irq pm
  irqchip/gicv3-its: Disable the ITS before initializing it
  irqchip/gicv3: Remove disabling redistributor and group1 non-secure interrupts
  irqchip/gic: Allow self-SGIs for SMP on UP configurations
  genirq: Correctly configure the trigger on chained interrupts

8 years agoMerge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 28 Aug 2016 16:03:05 +0000 (09:03 -0700)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull timer fixes from Thomas Gleixner:
 "A few updates for timers & co:

   - prevent a livelock in the timekeeping code when debugging is
     enabled

   - prevent out of bounds access in the timekeeping debug code

   - various fixes in clocksource drivers

   - a new maintainers entry"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/drivers/sun4i: Clear interrupts after stopping timer in probe function
  drivers/clocksource/pistachio: Fix memory corruption in init
  clocksource/drivers/timer-atmel-pit: Enable mck clock
  clocksource/drivers/pxa: Fix include files for compilation
  MAINTAINERS: Add ARM ARCHITECTED TIMER entry
  timekeeping: Cap array access in timekeeping_debug
  timekeeping: Avoid taking lock in NMI path with CONFIG_DEBUG_TIMEKEEPING

8 years agoMerge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Linus Torvalds [Sat, 27 Aug 2016 22:51:50 +0000 (15:51 -0700)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull KVM fixes from Paolo Bonzini:
 "ARM:
   - fixes for ITS init issues, error handling, IRQ leakage, race
     conditions
   - an erratum workaround for timers
   - some removal of misleading use of errors and comments
   - a fix for GICv3 on 32-bit guests

  MIPS:
   - fix for where the guest could wrongly map the first page of
     physical memory

  x86:
   - nested virtualization fixes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  MIPS: KVM: Check for pfn noslot case
  kvm: nVMX: fix nested tsc scaling
  KVM: nVMX: postpone VMCS changes on MSR_IA32_APICBASE write
  KVM: nVMX: fix msr bitmaps to prevent L2 from accessing L0 x2APIC
  arm64: KVM: report configured SRE value to 32-bit world
  arm64: KVM: remove misleading comment on pmu status
  KVM: arm/arm64: timer: Workaround misconfigured timer interrupt
  arm64: Document workaround for Cortex-A72 erratum #853709
  KVM: arm/arm64: Change misleading use of is_error_pfn
  KVM: arm64: ITS: avoid re-mapping LPIs
  KVM: arm64: check for ITS device on MSI injection
  KVM: arm64: ITS: move ITS registration into first VCPU run
  KVM: arm64: vgic-its: Make updates to propbaser/pendbaser atomic
  KVM: arm64: vgic-its: Plug race in vgic_put_irq
  KVM: arm64: vgic-its: Handle errors from vgic_add_lpi
  KVM: arm64: ITS: return 1 on successful MSI injection

8 years agoMerge branch 'akpm' (patches from Andrew)
Linus Torvalds [Sat, 27 Aug 2016 06:12:12 +0000 (23:12 -0700)]
Merge branch 'akpm' (patches from Andrew)

Merge fixes from Andrew Morton:
 "11 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm: silently skip readahead for DAX inodes
  dax: fix device-dax region base
  fs/seq_file: fix out-of-bounds read
  mm: memcontrol: avoid unused function warning
  mm: clarify COMPACTION Kconfig text
  treewide: replace config_enabled() with IS_ENABLED() (2nd round)
  printk: fix parsing of "brl=" option
  soft_dirty: fix soft_dirty during THP split
  sysctl: handle error writing UINT_MAX to u32 fields
  get_maintainer: quiet noisy implicit -f vcs_file_exists checking
  byteswap: don't use __builtin_bswap*() with sparse

8 years agoMerge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Linus Torvalds [Sat, 27 Aug 2016 06:05:19 +0000 (23:05 -0700)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull ARM64 fix from Catalin Marinas:
 "ARM64 fix to avoid potential TLB conflict when CONFIG_RANDOMIZE_BASE
  is enabled"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: avoid TLB conflict with CONFIG_RANDOMIZE_BASE

8 years agoMerge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Linus Torvalds [Sat, 27 Aug 2016 06:01:09 +0000 (23:01 -0700)]
Merge tag 'for-linus' of git://git./linux/kernel/git/dledford/rdma

Pull rdma fixes from Doug Ledford:
 "Round one of 4.8 rc fixes.

  This should be the bulk of the -rc fixes for 4.8.  I only have a few
  things that are still outstanding (two ipoib bugs for which the
  solution is not yet fully known, and a few queued items that came in
  after my last push and I didn't want to delay this pull request for
  late comers again).

  Even though the patch count is kind of high, everything is minor fixes
  so the overall churn is pretty low.

  Summary:

   - minor fixes to cxgb4
   - minor fixes to mlx4
   - one minor fix each to core, rxe, isert, srpt, mlx5, ocrdma, and usnic
   - six or so fixes to i40iw fixes
   - the rest are hfi1 fixes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (34 commits)
  i40iw: Send last streaming mode message for loopback connections
  IB/srpt: Update sport->port_guid with each port refresh
  RDMA/ocrdma: Fix the max_sge reported from FW
  i40iw: Avoid writing to freed memory
  i40iw: Fix double free of allocated_buffer
  IB/mlx5: Remove superfluous include of io-mapping.h
  i40iw: Do not set self-referencing pointer to NULL after kfree
  i40iw: Add missing NULL check for MPA private data
  iw_cxgb4: Fix cxgb4 arm CQ logic w/IB_CQ_REPORT_MISSED_EVENTS
  i40iw: Add missing check for interface already open
  i40iw: Protect req_resource_num update
  i40iw: Change mem_resources pointer to a u8
  IB/core: Use memdup_user() rather than duplicating its implementation
  IB/qib: Use memdup_user() rather than duplicating its implementation
  iw_cxgb4: use the MPA initiator's IRD if < our ORD
  iw_cxgb4: limit IRD/ORD advertised to ULP by device max.
  IB/hfi1: Fix mm_struct use after free
  IB/rdmvat: Fix double vfree() in rvt_create_qp() error path
  IB/hfi1: Improve J_KEY generation
  IB/hfi1: Return invalid field for non-QSFP CableInfo queries
  ...

8 years agoMerge tag 'sound-4.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai...
Linus Torvalds [Sat, 27 Aug 2016 05:53:21 +0000 (22:53 -0700)]
Merge tag 'sound-4.8-rc4' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "Here are a bunch of fixes as you can see in diffstat.

  One core change in ASoC is about the unexpected unbinding error, and
  another about debugfs cleanup.

  The rest are wide-spread driver-specific fixes: a series of LINE6 USB
  fixes, a HD-audio quirk, and various ASoC fixes including OMAP boot
  fixes and Intel SKL fixes"

* tag 'sound-4.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (22 commits)
  ALSA: hda/realtek - fix headset mic detection for MSI MS-B120
  ASoC: omap-mcpdm: Fix irq resource handling
  ASoC: max98371: Add terminate entry for i2c_device_id tables
  ALSA: line6: Fix POD sysfs attributes segfault
  ALSA: line6: Give up on the lock while URBs are released.
  ALSA: line6: Remove double line6_pcm_release() after failed acquire.
  ASoC: omap-abe-twl6040: Correct dmic-codec device registration
  ASoC: core: Clean up DAPM before the card debugfs
  ASoC: omap-mcpdm: Drop pdmclk clock handling
  ASoC: atmel_ssc_dai: Don't unconditionally reset SSC on stream startup
  ASoC: compress: Fix leak of a widget list in soc_compr_open_fe
  ASoC: Intel: Skylake: Fix error return code in skl_probe()
  ASoC: wm2000: Fix return of uninitialised varible
  ASoC: Fix leak of rtd in soc_bind_dai_link
  ASoC: da7213: Default to 64 BCLKs per WCLK to support all formats
  ASoC: nau8825: fix static check error about semaphone control
  ASoC: nau8825: fix bug in playback when suspend
  ASoC: samsung: Fix clock handling in S3C24XX_UDA134X card
  ASoC: simple-card-utils: add missing MODULE_xxx()
  ASoC: Intel: Skylake: Check list empty while getting module info
  ...

8 years agorhashtable: fix a memory leak in alloc_bucket_locks()
Eric Dumazet [Fri, 26 Aug 2016 15:51:39 +0000 (08:51 -0700)]
rhashtable: fix a memory leak in alloc_bucket_locks()

If vmalloc() was successful, do not attempt a kmalloc_array()

Fixes: 4cf0b354d92e ("rhashtable: avoid large lock-array allocations")
Reported-by: CAI Qian <caiqian@redhat.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Florian Westphal <fw@strlen.de>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: CAI Qian <caiqian@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agosfc: fix potential stack corruption from running past stat bitmask
Andrew Rybchenko [Fri, 26 Aug 2016 10:19:34 +0000 (11:19 +0100)]
sfc: fix potential stack corruption from running past stat bitmask

On 32-bit systems, mask is only an array of 3 longs, not 4, so don't try
to write to mask[3].
Also include build-time checks in case the size of the bitmask changes.

Fixes: 3c36a2aded8c ("sfc: display vadaptor statistics for all interfaces")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agoMerge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetoot...
David S. Miller [Sat, 27 Aug 2016 04:09:17 +0000 (21:09 -0700)]
Merge branch 'for-upstream' of git://git./linux/kernel/git/bluetooth/bluetooth

Johan Hedberg says:

====================
pull request: bluetooth 2016-08-25

Here are a couple of important Bluetooth fixes for the 4.8 kernel:

 - Memory leak fix for HCI requests
 - Fix sk_filter handling with L2CAP
 - Fix sock_recvmsg behavior when MSG_TRUNC is not set

Please let me know if there are any issues pulling. Thanks.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
8 years agoMerge branch 'for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mason...
Linus Torvalds [Sat, 27 Aug 2016 03:22:01 +0000 (20:22 -0700)]
Merge branch 'for-linus-4.8' of git://git./linux/kernel/git/mason/linux-btrfs

Pull btrfs fixes from Chris Mason:
 "We've queued up a few different fixes in here.  These range from
  enospc corners to fsync and quota fixes, and a few targeted at error
  handling for corrupt metadata/fuzzing"

* 'for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: fix lockdep warning on deadlock against an inode's log mutex
  Btrfs: detect corruption when non-root leaf has zero item
  Btrfs: check btree node's nritems
  btrfs: don't create or leak aliased root while cleaning up orphans
  Btrfs: fix em leak in find_first_block_group
  btrfs: do not background blkdev_put()
  Btrfs: clarify do_chunk_alloc()'s return value
  btrfs: fix fsfreeze hang caused by delayed iputs deal
  btrfs: update btrfs_space_info's bytes_may_use timely
  btrfs: divide btrfs_update_reserved_bytes() into two functions
  btrfs: use correct offset for reloc_inode in prealloc_file_extent_cluster()
  btrfs: qgroup: Fix qgroup incorrectness caused by log replay
  btrfs: relocation: Fix leaking qgroups numbers on data extents
  btrfs: qgroup: Refactor btrfs_qgroup_insert_dirty_extent()
  btrfs: waiting on qgroup rescan should not always be interruptible
  btrfs: properly track when rescan worker is running
  btrfs: flush_space: treat return value of do_chunk_alloc properly
  Btrfs: add ASSERT for block group's memory leak
  btrfs: backref: Fix soft lockup in __merge_refs function
  Btrfs: fix memory leak of reloc_root

8 years agoMerge tag 'dlm-4.8-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland...
Linus Torvalds [Sat, 27 Aug 2016 03:18:49 +0000 (20:18 -0700)]
Merge tag 'dlm-4.8-fixes' of git://git./linux/kernel/git/teigland/linux-dlm

Pull dlm fix from David Teigland:
 "This fixes a bug introduced by recent debugfs cleanup"

* tag 'dlm-4.8-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
  dlm: fix malfunction of dlm_tool caused by debugfs changes

8 years agoMerge tag 'dm-4.8-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device...
Linus Torvalds [Sat, 27 Aug 2016 03:15:32 +0000 (20:15 -0700)]
Merge tag 'dm-4.8-fixes-3' of git://git./linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - another stable fix for DM flakey (that tweaks the previous fix that
   didn't factor in expected 'drop_writes' behavior for read IO).

 - a dm-log bio operation flags fix for the broader block changes that
   were merged during the 4.8 merge window.

* tag 'dm-4.8-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm log: fix unitialized bio operation flags
  dm flakey: fix reads to be issued if drop_writes configured

8 years agoMerge tag 'iommu-fixes-v4.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sat, 27 Aug 2016 03:12:35 +0000 (20:12 -0700)]
Merge tag 'iommu-fixes-v4.8-rc3' of git://git./linux/kernel/git/joro/iommu

Pull IOMMU fixes from Joerg Roedel:
 "Fixes from Will Deacon:

   - fix a couple of thinkos in the CMDQ error handling and
     short-descriptor page table code that have been there since day one

   - disable stalling faults, since they may result in hardware deadlock

   - fix an accidental BUG() when passing disable_bypass=1 on the
     cmdline"

* tag 'iommu-fixes-v4.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/arm-smmu: Don't BUG() if we find aborting STEs with disable_bypass
  iommu/arm-smmu: Disable stalling faults for all endpoints
  iommu/arm-smmu: Fix CMDQ error handling
  iommu/io-pgtable-arm-v7s: Fix attributes when splitting blocks

8 years agoMerge branch 'for-linus' of git://git.kernel.dk/linux-block
Linus Torvalds [Sat, 27 Aug 2016 01:50:07 +0000 (18:50 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:
 "Here's a set of block fixes for the current 4.8-rc release.  This
  contains:

   - a fix for a secure erase regression, from Adrian.

   - a fix for an mmc use-after-free bug regression, also from Adrian.

   - potential zero pointer deference in bdev freezing, from Andrey.

   - a race fix for blk_set_queue_dying() from Bart.

   - a set of xen blkfront fixes from Bob Liu.

   - three small fixes for bcache, from Eric and Kent.

   - a fix for a potential invalid NVMe state transition, from Gabriel.

   - blk-mq CPU offline fix, preventing us from issuing and completing a
     request on the wrong queue.  From me.

   - revert two previous floppy changes, since they caused a user
     visibile regression.  A better fix is in the works.

   - ensure that we don't send down bios that have more than 256
     elements in them.  Fixes a crash with bcache, for example.  From
     Ming.

   - a fix for deferencing an error pointer with cgroup writeback.
     Fixes a regression.  From Vegard"

* 'for-linus' of git://git.kernel.dk/linux-block:
  mmc: fix use-after-free of struct request
  Revert "floppy: refactor open() flags handling"
  Revert "floppy: fix open(O_ACCMODE) for ioctl-only open"
  fs/block_dev: fix potential NULL ptr deref in freeze_bdev()
  blk-mq: improve warning for running a queue on the wrong CPU
  blk-mq: don't overwrite rq->mq_ctx
  block: make sure a big bio is split into at most 256 bvecs
  nvme: Fix nvme_get/set_features() with a NULL result pointer
  bdev: fix NULL pointer dereference
  xen-blkfront: free resources if xlvbd_alloc_gendisk fails
  xen-blkfront: introduce blkif_set_queue_limits()
  xen-blkfront: fix places not updated after introducing 64KB page granularity
  bcache: pr_err: more meaningful error message when nr_stripes is invalid
  bcache: RESERVE_PRIO is too small by one when prio_buckets() is a power of two.
  bcache: register_bcache(): call blkdev_put() when cache_alloc() fails
  block: Fix race triggered by blk_set_queue_dying()
  block: Fix secure erase
  nvme: Prevent controller state invalid transition

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Sat, 27 Aug 2016 01:36:23 +0000 (18:36 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

Pull input subsystem fixes from Dmitry Torokhov:
 "Simply small driver fixups"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: ads7846 - remove redundant regulator_disable call
  Input: synaptics-rmi4 - fix register descriptor subpacket map construction
  Input: tegra-kbc - fix inverted reset logic
  Input: silead - use devm_gpiod_get
  Input: i8042 - set up shared ps2_cmd_mutex for AUX ports

8 years agoMerge tag 'pci-v4.8-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Linus Torvalds [Sat, 27 Aug 2016 01:26:07 +0000 (18:26 -0700)]
Merge tag 'pci-v4.8-fixes-1' of git://git./linux/kernel/git/helgaas/pci

Pull PCI fixes from Bjorn Helgaas:
 "Resource management:
   - Update "pci=resource_alignment" documentation (Mathias Koehrer)

  MSI:
   - Use positive flags in pci_alloc_irq_vectors() (Christoph Hellwig)
   - Call pci_intx() when using legacy interrupts in pci_alloc_irq_vectors() (Christoph Hellwig)

  Intel VMD host bridge driver:
   - Fix infinite loop executing irq's (Keith Busch)"

* tag 'pci-v4.8-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  x86/PCI: VMD: Fix infinite loop executing irq's
  PCI: Call pci_intx() when using legacy interrupts in pci_alloc_irq_vectors()
  PCI: Use positive flags in pci_alloc_irq_vectors()
  PCI: Update "pci=resource_alignment" documentation

8 years agomm: silently skip readahead for DAX inodes
Ross Zwisler [Thu, 25 Aug 2016 22:17:17 +0000 (15:17 -0700)]
mm: silently skip readahead for DAX inodes

For DAX inodes we need to be careful to never have page cache pages in
the mapping->page_tree.  This radix tree should be composed only of DAX
exceptional entries and zero pages.

ltp's readahead02 test was triggering a warning because we were trying
to insert a DAX exceptional entry but found that a page cache page had
already been inserted into the tree.  This page was being inserted into
the radix tree in response to a readahead(2) call.

Readahead doesn't make sense for DAX inodes, but we don't want it to
report a failure either.  Instead, we just return success and don't do
any work.

Link: http://lkml.kernel.org/r/20160824221429.21158-1-ross.zwisler@linux.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reported-by: Jeff Moyer <jmoyer@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Jan Kara <jack@suse.com>
Cc: <stable@vger.kernel.org> [4.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agodax: fix device-dax region base
Dan Williams [Thu, 25 Aug 2016 22:17:14 +0000 (15:17 -0700)]
dax: fix device-dax region base

The data offset for a dax region needs to account for a reservation in
the resource range.  Otherwise, device-dax is allowing mappings directly
into the memmap or device-info-block area with crash signatures like the
following:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
 IP: get_zone_device_page+0x11/0x30
 Call Trace:
   follow_devmap_pmd+0x298/0x2c0
   follow_page_mask+0x275/0x530
   __get_user_pages+0xe3/0x750
   __gfn_to_pfn_memslot+0x1b2/0x450 [kvm]
   tdp_page_fault+0x130/0x280 [kvm]
   kvm_mmu_page_fault+0x5f/0xf0 [kvm]
   handle_ept_violation+0x94/0x180 [kvm_intel]
   vmx_handle_exit+0x1d3/0x1440 [kvm_intel]
   kvm_arch_vcpu_ioctl_run+0x81d/0x16a0 [kvm]
   kvm_vcpu_ioctl+0x33c/0x620 [kvm]
   do_vfs_ioctl+0xa2/0x5d0
   SyS_ioctl+0x79/0x90
   entry_SYSCALL_64_fastpath+0x1a/0xa4

Fixes: ab68f2622136 ("/dev/dax, pmem: direct access to persistent memory")
Link: http://lkml.kernel.org/r/147205536732.1606.8994275381938837346.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reported-by: Abhilash Kumar Mulumudi <m.abhilash-kumar@hpe.com>
Reported-by: Toshi Kani <toshi.kani@hpe.com>
Tested-by: Toshi Kani <toshi.kani@hpe.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agofs/seq_file: fix out-of-bounds read
Vegard Nossum [Thu, 25 Aug 2016 22:17:11 +0000 (15:17 -0700)]
fs/seq_file: fix out-of-bounds read

seq_read() is a nasty piece of work, not to mention buggy.

It has (I think) an old bug which allows unprivileged userspace to read
beyond the end of m->buf.

I was getting these:

    BUG: KASAN: slab-out-of-bounds in seq_read+0xcd2/0x1480 at addr ffff880116889880
    Read of size 2713 by task trinity-c2/1329
    CPU: 2 PID: 1329 Comm: trinity-c2 Not tainted 4.8.0-rc1+ #96
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
    Call Trace:
      kasan_object_err+0x1c/0x80
      kasan_report_error+0x2cb/0x7e0
      kasan_report+0x4e/0x80
      check_memory_region+0x13e/0x1a0
      kasan_check_read+0x11/0x20
      seq_read+0xcd2/0x1480
      proc_reg_read+0x10b/0x260
      do_loop_readv_writev.part.5+0x140/0x2c0
      do_readv_writev+0x589/0x860
      vfs_readv+0x7b/0xd0
      do_readv+0xd8/0x2c0
      SyS_readv+0xb/0x10
      do_syscall_64+0x1b3/0x4b0
      entry_SYSCALL64_slow_path+0x25/0x25
    Object at ffff880116889100, in cache kmalloc-4096 size: 4096
    Allocated:
    PID = 1329
      save_stack_trace+0x26/0x80
      save_stack+0x46/0xd0
      kasan_kmalloc+0xad/0xe0
      __kmalloc+0x1aa/0x4a0
      seq_buf_alloc+0x35/0x40
      seq_read+0x7d8/0x1480
      proc_reg_read+0x10b/0x260
      do_loop_readv_writev.part.5+0x140/0x2c0
      do_readv_writev+0x589/0x860
      vfs_readv+0x7b/0xd0
      do_readv+0xd8/0x2c0
      SyS_readv+0xb/0x10
      do_syscall_64+0x1b3/0x4b0
      return_from_SYSCALL_64+0x0/0x6a
    Freed:
    PID = 0
    (stack is not available)
    Memory state around the buggy address:
     ffff88011688a000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
     ffff88011688a080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    >ffff88011688a100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
       ^
     ffff88011688a180: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
     ffff88011688a200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
    ==================================================================
    Disabling lock debugging due to kernel taint

This seems to be the same thing that Dave Jones was seeing here:

  https://lkml.org/lkml/2016/8/12/334

There are multiple issues here:

  1) If we enter the function with a non-empty buffer, there is an attempt
     to flush it. But it was not clearing m->from after doing so, which
     means that if we try to do this flush twice in a row without any call
     to traverse() in between, we are going to be reading from the wrong
     place -- the splat above, fixed by this patch.

  2) If there's a short write to userspace because of page faults, the
     buffer may already contain multiple lines (i.e. pos has advanced by
     more than 1), but we don't save the progress that was made so the
     next call will output what we've already returned previously. Since
     that is a much less serious issue (and I have a headache after
     staring at seq_read() for the past 8 hours), I'll leave that for now.

Link: http://lkml.kernel.org/r/1471447270-32093-1-git-send-email-vegard.nossum@oracle.com
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm: memcontrol: avoid unused function warning
Arnd Bergmann [Thu, 25 Aug 2016 22:17:08 +0000 (15:17 -0700)]
mm: memcontrol: avoid unused function warning

A bugfix in v4.8-rc2 introduced a harmless warning when
CONFIG_MEMCG_SWAP is disabled but CONFIG_MEMCG is enabled:

  mm/memcontrol.c:4085:27: error: 'mem_cgroup_id_get_online' defined but not used [-Werror=unused-function]
   static struct mem_cgroup *mem_cgroup_id_get_online(struct mem_cgroup *memcg)

This moves the function inside of the #ifdef block that hides the
calling function, to avoid the warning.

Fixes: 1f47b61fb407 ("mm: memcontrol: fix swap counter leak on swapout from offline cgroup")
Link: http://lkml.kernel.org/r/20160824113733.2776701-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agomm: clarify COMPACTION Kconfig text
Michal Hocko [Thu, 25 Aug 2016 22:17:05 +0000 (15:17 -0700)]
mm: clarify COMPACTION Kconfig text

The current wording of the COMPACTION Kconfig help text doesn't
emphasise that disabling COMPACTION might cripple the page allocator
which relies on the compaction quite heavily for high order requests and
an unexpected OOM can happen with the lack of compaction.  Make sure we
are vocal about that.

Link: http://lkml.kernel.org/r/20160823091726.GK23577@dhcp22.suse.cz
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
8 years agotreewide: replace config_enabled() with IS_ENABLED() (2nd round)
Masahiro Yamada [Thu, 25 Aug 2016 22:17:02 +0000 (15:17 -0700)]
treewide: replace config_enabled() with IS_ENABLED() (2nd round)

Commit 97f2645f358b ("tree-wide: replace config_enabled() with
IS_ENABLED()") mostly killed config_enabled(), but some new users have
appeared for v4.8-rc1.  They are all used for a boolean option, so can
be replaced with IS_ENABLED() safely.

Link: http://lkml.kernel.org/r/1471970749-24867-1-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>