GitHub/moto-9609/android_kernel_motorola_exynos9610.git
9 years agodrm: omapdrm: Switch connector DPMS to atomic helpers
Laurent Pinchart [Thu, 5 Mar 2015 20:50:51 +0000 (22:50 +0200)]
drm: omapdrm: Switch connector DPMS to atomic helpers

The atomic connector DPMS helper implements the connector DPMS operation
using atomic commit, removing the need for DPMS helper operations on
CRTCs and encoders.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
9 years agodrm: omapdrm: Switch mode config to atomic helpers
Laurent Pinchart [Thu, 5 Mar 2015 19:54:54 +0000 (21:54 +0200)]
drm: omapdrm: Switch mode config to atomic helpers

This removes the legacy mode config code. The CRTC and encoder prepare
and commit operations are not used anymore, remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
9 years agodrm: omapdrm: Switch plane update to atomic helpers
Laurent Pinchart [Thu, 5 Mar 2015 19:50:00 +0000 (21:50 +0200)]
drm: omapdrm: Switch plane update to atomic helpers

This removes the legacy plane update code. Wire up the default atomic
check and atomic commit mode config helpers as needed by the plane
update atomic helpers.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
9 years agodrm: omapdrm: Handle primary plane config through atomic plane ops
Laurent Pinchart [Thu, 5 Mar 2015 11:45:14 +0000 (13:45 +0200)]
drm: omapdrm: Handle primary plane config through atomic plane ops

Use the new CRTC atomic transitional helpers drm_helper_crtc_mode_set()
and drm_helper_crtc_mode_set_base() to implement the CRTC .mode_set and
.mode_set_base operations. This delegates primary plane configuration to
the plane .atomic_update and .atomic_disable operations, removing
duplicate code from the CRTC implementation.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
9 years agodrm: omapdrm: Implement planes atomic operations
Laurent Pinchart [Thu, 5 Mar 2015 11:39:56 +0000 (13:39 +0200)]
drm: omapdrm: Implement planes atomic operations

Implement the CRTC .atomic_begin() and .atomic_flush() operations, the
plane .atomic_check(), .atomic_update() and operations, and use the
transitional atomic helpers to implement the plane update and disable
operations on top of the new atomic operations.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
9 years agodrm: omapdrm: Wire up atomic state object scaffolding
Laurent Pinchart [Thu, 5 Mar 2015 19:38:16 +0000 (21:38 +0200)]
drm: omapdrm: Wire up atomic state object scaffolding

Hook up the default .reset(), .atomic_duplicate_state() and
.atomic_free_state() helpers to ensure that state objects are properly
created and destroyed, and call drm_mode_config_reset() at init time to
create the initial state objects.

Framebuffer reference count also gets maintained automatically by the
transitional helpers except for the legacy page flip operation. Maintain
it explicitly there.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
9 years agodrm: omapdrm: Implement encoder .disable() and .enable() operations
Laurent Pinchart [Fri, 6 Mar 2015 22:22:39 +0000 (00:22 +0200)]
drm: omapdrm: Implement encoder .disable() and .enable() operations

The operations are required by the atomic helpers, implement them.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
9 years agodrm: omapdrm: Rework CRTC enable/disable for atomic updates
Laurent Pinchart [Thu, 5 Mar 2015 20:13:22 +0000 (22:13 +0200)]
drm: omapdrm: Rework CRTC enable/disable for atomic updates

When using atomic updates the CRTC .enable() and .disable() helper
operations are preferred over the (then legacy) .prepare() and .commit()
operations. Implement .enable() and rework .disable() to not depend on
DPMS, easing DPMS removal later on.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
9 years agodrm: omapdrm: Rename CRTC DSS operations with an omap_crtc_dss_ prefix
Laurent Pinchart [Thu, 5 Mar 2015 20:01:02 +0000 (22:01 +0200)]
drm: omapdrm: Rename CRTC DSS operations with an omap_crtc_dss_ prefix

The omap_crtc_enable() and omap_crtc_disable() DSS operations functions
will clash with the new CRTC enable and disable helpers. Rename them to
omap_crtc_dss_*, as well as the other DSS operations for consistency.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
9 years agodrm: omapdrm: Clean up #include's
Laurent Pinchart [Thu, 5 Mar 2015 19:31:37 +0000 (21:31 +0200)]
drm: omapdrm: Clean up #include's

Use the <...> include style instead of "..." for DRM headers and sort
the headers alphabetically to ease detection of duplicates.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
9 years agodrm: omapdrm: Fix page flip race with CRTC disable
Laurent Pinchart [Wed, 4 Mar 2015 16:24:18 +0000 (18:24 +0200)]
drm: omapdrm: Fix page flip race with CRTC disable

We can't rely on crtc->primary->fb in the page flip worker, as a racing
CRTC disable (due for instance to an explicit framebuffer deletion from
userspace) would set that field to NULL before the worker gets a change
to run. Store the framebuffer queued for page flip in a new field of
omap_crtc instead, and hold a reference to it.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
9 years agodrm: omapdrm: Turn vblank on/off when enabling/disabling CRTC
Laurent Pinchart [Sun, 25 Jan 2015 20:42:30 +0000 (22:42 +0200)]
drm: omapdrm: Turn vblank on/off when enabling/disabling CRTC

The DRM core vblank handling mechanism requires drivers to forcefully
turn vblank reporting off when disabling the CRTC, and to restore the
vblank reporting status when enabling the CRTC.

Implement this using the drm_crtc_vblank_on/off helpers. When disabling
vblank we must first wait for page flips to complete, so implement page
flip completion wait as well.

Finally, drm_crtc_vblank_off() must be called at startup to synchronize
the state of the vblank core code with the hardware, which is initially
disabled. An interesting side effect is that the .disable_vblank()
operation will now be called for the first time with the CRTC disabled
and the DISPC runtime suspended. The dispc_runtime_get() call in
.disable_vblank() is supposed to take care of that, but the operation is
called with a spinlock held, which prevents it from sleeping.

To fix that move DISPC runtime PM handling out of the vblank operations
to the CRTC code, ensuring that the display controller will always be
powered when enabling or disabling vblank interrupts.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
9 years agodrm: omapdrm: Rework page flip handling
Laurent Pinchart [Sun, 25 Jan 2015 20:42:30 +0000 (22:42 +0200)]
drm: omapdrm: Rework page flip handling

To implement proper vblank control the driver will need to wait for page
flip completion before disabling the vblank interrupt. This is made
complex by the page flip implementation which queues and submits page
flips to the hardware in two separate steps between which DRM locks are
released. We thus need to avoid waiting on a page flip that has been
queued but not submitted as submission and wait are covered by the same
lock.

Rework page flip handling as a first step by splitting the flip_pending
boolean variable into an enumerated state and moving between states
based on flip queue, submission and completion. The CANCELLED state will
be used in a second step.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
9 years agodrm: omapdrm: Cancel pending page flips when closing device
Laurent Pinchart [Sun, 18 Jan 2015 14:57:36 +0000 (16:57 +0200)]
drm: omapdrm: Cancel pending page flips when closing device

Pending page flips must be cancelled when closing the device, otherwise
their completion at next vblank will result in nasty effects, including
possible oopses due to resources required to complete the page flip
being freed.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
9 years agodrm: omapdrm: Simplify IRQ registration
Laurent Pinchart [Sun, 25 Jan 2015 20:06:45 +0000 (22:06 +0200)]
drm: omapdrm: Simplify IRQ registration

The omapdrm can't use drm_irq_install() and drm_irq_uninstall() as it
delegates IRQ handling to the omapdss driver. However, the code still
declares IRQ-related operations used by the DRM IRQ helpers, and calls
them indirectly.

Simplify the implementation by calling the functions directly or
inlining them. The irq_enabled checks can then also be simplified as
the call stacks guarantees that omap_drm_irq_install() and
omap_drm_irq_uninstall() will never run concurrently.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
9 years agodrm: omapdrm: Rename omap_crtc page flip-related fields
Laurent Pinchart [Mon, 26 Jan 2015 00:58:51 +0000 (02:58 +0200)]
drm: omapdrm: Rename omap_crtc page flip-related fields

The old_fb field is only used to indicate whether a page flip is
pending. Turn it into a bool named flip_pending. Rename event and
page_flip_work to flip_event and flip_work for consistency.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
9 years agodrm: omapdrm: Rename omap_crtc_page_flip_locked to omap_crtc_page_flip
Laurent Pinchart [Sun, 18 Jan 2015 14:36:19 +0000 (16:36 +0200)]
drm: omapdrm: Rename omap_crtc_page_flip_locked to omap_crtc_page_flip

The operation is called page_flip, rename its implementation
accordingly.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
9 years agodrm: omapdrm: Apply settings synchronously
Laurent Pinchart [Sat, 17 Jan 2015 17:09:26 +0000 (19:09 +0200)]
drm: omapdrm: Apply settings synchronously

The omapdrm driver implements a mechanism to apply new settings (due to
plane update, plane disable, plane property set, CRTC mode set or CRTC
DPMS) asynchronously. While this improves performance, it adds a level
of complexity that makes transition to the atomic update API close to
impossible. Furthermore the atomic update API requires part of the apply
operations to be synchronous (such as pinning the framebuffers), so the
current implementation needs to be changed.

Simplify the CRTC and plane code by making updates synchronous to
prepare for the switch to the atomic update API. Asynchronous update
will be implemented in a second step.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
9 years agodrm: omapdrm: Store the rotation property in dev->mode_config
Laurent Pinchart [Fri, 6 Mar 2015 15:16:43 +0000 (17:16 +0200)]
drm: omapdrm: Store the rotation property in dev->mode_config

Rotation is a standard property, store it in
dev->mode_config.rotation_property. While at it, extract the properties
initialization code to a separate function instead of running it for
every plane.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
9 years agoMerge tag 'drm-intel-next-fixes-2015-06-11' of git://anongit.freedesktop.org/drm...
Dave Airlie [Fri, 12 Jun 2015 00:16:36 +0000 (10:16 +1000)]
Merge tag 'drm-intel-next-fixes-2015-06-11' of git://anongit.freedesktop.org/drm-intel into drm-next

firmware name fix

* tag 'drm-intel-next-fixes-2015-06-11' of git://anongit.freedesktop.org/drm-intel:
  drm/i915/skl: Fix DMC API version in firmware file name

9 years agoMerge tag 'drm-amdkfd-next-fixes-2015-06-10' of git://people.freedesktop.org/~gabbayo...
Dave Airlie [Fri, 12 Jun 2015 00:14:20 +0000 (10:14 +1000)]
Merge tag 'drm-amdkfd-next-fixes-2015-06-10' of git://people.freedesktop.org/~gabbayo/linux into drm-next

- Make the reset wavefronts action be per process per device instead of
  per process, because one device can be stuck but the other one won't be

- Add some missing properties to the CZ device_info structure

- Rename symbols to not have CONFIG_ prefix

- Some more cleanups and debug prints

* tag 'drm-amdkfd-next-fixes-2015-06-10' of git://people.freedesktop.org/~gabbayo/linux:
  drm/amdkfd: remove not used defines from cik_regs.h
  drm/amdkfd: Add missing properties to CZ device info
  drm/amdkfd: make reset wavefronts per process per device
  drm/amdkfd: add debug print to kfd_events.c
  drm/amdkfd: avoid CONFIG_ prefix for non-Kconfig symbols

9 years agoMerge branch '2015-06-08-st-drm-next' of http://git.linaro.org/people/benjamin.gaigna...
Dave Airlie [Fri, 12 Jun 2015 00:14:00 +0000 (10:14 +1000)]
Merge branch '2015-06-08-st-drm-next' of git.linaro.org/people/benjamin.gaignard/kernel into drm-next

Mainly it is fixing timing on HDMI to be compliant with CEA-861E spec.

* '2015-06-08-st-drm-next' of http://git.linaro.org/people/benjamin.gaignard/kernel:
  drm/sti: vtg fix CEA-861E video format timing error
  drm/sti: hdmi fix CEA-861E video format timing error
  drm/sti: VTG interrupt names are badly displayed
  drm/sti: missing first pixel column on HDMI display
  drm/sti: correctly test devm_ioremap() return

9 years agodrm/virtio: remove some dead code
Dan Carpenter [Wed, 10 Jun 2015 19:27:51 +0000 (22:27 +0300)]
drm/virtio: remove some dead code

The goto is correct, and we never reach the return statement so just
delete the dead code.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
9 years agodrm/virtio: checking for NULL instead of IS_ERR
Dan Carpenter [Wed, 10 Jun 2015 19:27:11 +0000 (22:27 +0300)]
drm/virtio: checking for NULL instead of IS_ERR

virtio_gpu_alloc_object() returns an error pointer, it never returns
NULL.

Fixes: dc5698e80cf7 ('Add virtio gpu driver.')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
9 years agoMerge branch 'drm-next-4.2-amdgpu' of git://people.freedesktop.org/~agd5f/linux into...
Dave Airlie [Thu, 11 Jun 2015 03:04:07 +0000 (13:04 +1000)]
Merge branch 'drm-next-4.2-amdgpu' of git://people.freedesktop.org/~agd5f/linux into drm-next

More fixes for amdgpu for 4.2.  We've integrated Jerome's comments
about the interface among other things.  I'll be on vacation next week
so Christian will be handling any updates next week.

* 'drm-next-4.2-amdgpu' of git://people.freedesktop.org/~agd5f/linux: (23 commits)
  drm/amdgpu: fix a amdgpu_dpm=0 bug
  drm/amdgpu: don't enable/disable display twice on suspend/resume
  drm/amdgpu: fix UVD/VCE VM emulation
  drm/amdgpu: enable vce powergating
  drm/amdgpu/iceland: don't call smu_init on resume
  drm/amdgpu/tonga: don't call smu_init on resume
  drm/amdgpu/cz: don't call smu_init on resume
  drm/amdgpu: update to latest gfx8 golden register settings
  drm/amdgpu: whitespace cleanup in gmc8 golden regs
  drm/admgpu: move XDMA golden registers to dce code
  drm/amdgpu: fix the build on big endian
  drm/amdgpu: cleanup UAPI comments
  drm/amdgpu: remove AMDGPU_CTX_OP_STATE_RUNNING
  drm/amdgpu: remove the VI hardware semaphore in ring sync
  drm/amdgpu: set the gfx config properly for all CZ variants (v2)
  drm/amdgpu: also print the pci revision when printing the pci ids
  drm/amdgpu: cleanup VA IOCTL
  drm/amdgpu: fix saddr handling in amdgpu_vm_bo_unmap
  drm/amdgpu: fix amdgpu_vm_bo_map
  drm/amdgpu: remove unused AMDGPU_IB_FLAG_GDS
  ...

9 years agodrm/amdgpu: fix a amdgpu_dpm=0 bug
Sonny Jiang [Wed, 10 Jun 2015 17:46:36 +0000 (13:46 -0400)]
drm/amdgpu: fix a amdgpu_dpm=0 bug

Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/amdgpu: don't enable/disable display twice on suspend/resume
Alex Deucher [Wed, 10 Jun 2015 15:52:00 +0000 (11:52 -0400)]
drm/amdgpu: don't enable/disable display twice on suspend/resume

We were doing it in the common code and in the IP specific code.
Remove the IP specific code.  The common code handles the
ordering properly.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/amdgpu: fix UVD/VCE VM emulation
Christian König [Wed, 10 Jun 2015 15:20:11 +0000 (17:20 +0200)]
drm/amdgpu: fix UVD/VCE VM emulation

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/amdgpu: enable vce powergating
Sonny Jiang [Thu, 28 May 2015 19:47:53 +0000 (15:47 -0400)]
drm/amdgpu: enable vce powergating

Enable VCE dpm and powergating. VCE dpm dynamically scales the VCE clocks on
demand.

Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
9 years agodrm/amdgpu/iceland: don't call smu_init on resume
Alex Deucher [Tue, 9 Jun 2015 21:46:30 +0000 (17:46 -0400)]
drm/amdgpu/iceland: don't call smu_init on resume

smu_init allocates buffers and initializes them.  It does not
touch the hw.  There is no need to do it again on resume.  It
should really be part of sw_init (and smu_fini should be part
of sw_fini), but we need the firmware sizes from the other IPs
for firmware loading so we have to wait until sw init is done
for all other IPs.

Reviewed-by: Sonny Jiang <Sonny.Jiang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/amdgpu/tonga: don't call smu_init on resume
Alex Deucher [Tue, 9 Jun 2015 21:42:10 +0000 (17:42 -0400)]
drm/amdgpu/tonga: don't call smu_init on resume

smu_init allocates buffers and initializes them.  It does not
touch the hw.  There is no need to do it again on resume.  It
should really be part of sw_init (and smu_fini should be part
of sw_fini), but we need the firmware sizes from the other IPs
for firmware loading so we have to wait until sw init is done
for all other IPs.

Reviewed-by: Sonny Jiang <Sonny.Jiang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/amdgpu/cz: don't call smu_init on resume
Alex Deucher [Tue, 9 Jun 2015 21:32:53 +0000 (17:32 -0400)]
drm/amdgpu/cz: don't call smu_init on resume

smu_init allocates buffers and initializes them.  It does not
touch the hw.  There is no need to do it again on resume.  It
should really be part of sw_init (and smu_fini should be part
of sw_fini), but we need the firmware sizes from the other IPs
for firmware loading so we have to wait until sw init is done
for all other IPs.

Reviewed-by: Sonny Jiang <Sonny.Jiang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/amdgpu: update to latest gfx8 golden register settings
Alex Deucher [Tue, 9 Jun 2015 18:33:03 +0000 (14:33 -0400)]
drm/amdgpu: update to latest gfx8 golden register settings

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/amdgpu: whitespace cleanup in gmc8 golden regs
Alex Deucher [Tue, 9 Jun 2015 18:06:18 +0000 (14:06 -0400)]
drm/amdgpu: whitespace cleanup in gmc8 golden regs

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/admgpu: move XDMA golden registers to dce code
Alex Deucher [Tue, 9 Jun 2015 17:51:25 +0000 (13:51 -0400)]
drm/admgpu: move XDMA golden registers to dce code

Already moved other display registers.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/amdgpu: fix the build on big endian
Alex Deucher [Tue, 9 Jun 2015 13:58:23 +0000 (09:58 -0400)]
drm/amdgpu: fix the build on big endian

Some leftover copy and pastes from radeon that never
got updated.

Reviewed-by: Christian König <christian.koenig@amd.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/amdgpu: cleanup UAPI comments
Christian König [Tue, 9 Jun 2015 13:54:37 +0000 (15:54 +0200)]
drm/amdgpu: cleanup UAPI comments

No functional change.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/amdgpu: remove AMDGPU_CTX_OP_STATE_RUNNING
Christian König [Tue, 9 Jun 2015 13:21:35 +0000 (15:21 +0200)]
drm/amdgpu: remove AMDGPU_CTX_OP_STATE_RUNNING

Not used.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/amdgpu: remove the VI hardware semaphore in ring sync
David Zhang [Wed, 10 Jun 2015 18:28:56 +0000 (02:28 +0800)]
drm/amdgpu: remove the VI hardware semaphore in ring sync

Signed-off-by: David Zhang <david1.zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
9 years agodrm/amdgpu: set the gfx config properly for all CZ variants (v2)
Alex Deucher [Fri, 5 Jun 2015 18:34:19 +0000 (14:34 -0400)]
drm/amdgpu: set the gfx config properly for all CZ variants (v2)

Need to adjust the number of CUs and RBs.

v2: get proper values

Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Samuel Li <samuel.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/amdgpu: also print the pci revision when printing the pci ids
Alex Deucher [Fri, 5 Jun 2015 19:04:33 +0000 (15:04 -0400)]
drm/amdgpu: also print the pci revision when printing the pci ids

The driver makes use of this information so print if to aid in
debugging.

Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Samuel Li <samuel.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/amdgpu: cleanup VA IOCTL
Christian König [Mon, 8 Jun 2015 13:03:00 +0000 (15:03 +0200)]
drm/amdgpu: cleanup VA IOCTL

Remove the unnecessary returned status and make the IOCTL write only.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/amdgpu: fix saddr handling in amdgpu_vm_bo_unmap
Christian König [Fri, 5 Jun 2015 18:56:17 +0000 (20:56 +0200)]
drm/amdgpu: fix saddr handling in amdgpu_vm_bo_unmap

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/amdgpu: fix amdgpu_vm_bo_map
Christian König [Fri, 5 Jun 2015 08:06:04 +0000 (10:06 +0200)]
drm/amdgpu: fix amdgpu_vm_bo_map

We need to reset the bo_va address, otherwise new mappings
wouldn't be updated in the page table.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/sti: vtg fix CEA-861E video format timing error
Vincent Abriou [Thu, 4 Jun 2015 11:59:02 +0000 (13:59 +0200)]
drm/sti: vtg fix CEA-861E video format timing error

HDMI analyzer tests showed that Vsync and Hsync signal were not
compliant with the HDMI protocol.

HDMI_DELAY should be taken into account in the VTG Vsync
programming to reflect the 6 pixels shift introduced in the VTG
Hsync programming.

Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
9 years agodrm/sti: hdmi fix CEA-861E video format timing error
Vincent Abriou [Fri, 5 Jun 2015 08:24:43 +0000 (10:24 +0200)]
drm/sti: hdmi fix CEA-861E video format timing error

HDMI analyzer tests showed that Vsync and Hsync signal were not
compliant with the HDMI protocol.

The first active pixel of a line is defined by HDMI_ACTIVE_VID_XMIN.
The last active pixel of a line is defined by HDMI_ACTIVE_VID_XMAX.

Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
9 years agodrm/sti: VTG interrupt names are badly displayed
Vincent Abriou [Thu, 4 Jun 2015 08:42:22 +0000 (10:42 +0200)]
drm/sti: VTG interrupt names are badly displayed

VTG interrupt names are badly displayed using "cat /proc/interrupts".
Simply use the VTG device name while registering the VTG interrupts
to fix it.

Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
9 years agodrm/sti: missing first pixel column on HDMI display
Vincent Abriou [Fri, 5 Jun 2015 09:47:49 +0000 (11:47 +0200)]
drm/sti: missing first pixel column on HDMI display

VTG programing updated to fix the shift of one column observed
on HDMI display.

Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
9 years agodrm/sti: correctly test devm_ioremap() return
Wei Yongjun [Mon, 8 Jun 2015 13:25:52 +0000 (15:25 +0200)]
drm/sti: correctly test devm_ioremap() return

In case of error, the function devm_ioremap_nocache() returns NULL
not ERR_PTR(). The IS_ERR() test in the return value check should
be replaced with NULL test.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
9 years agodrm/amdkfd: remove not used defines from cik_regs.h
Oded Gabbay [Sat, 6 Jun 2015 19:17:44 +0000 (22:17 +0300)]
drm/amdkfd: remove not used defines from cik_regs.h

Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
9 years agodrm/amdkfd: Add missing properties to CZ device info
Oded Gabbay [Sat, 6 Jun 2015 18:45:43 +0000 (21:45 +0300)]
drm/amdkfd: Add missing properties to CZ device info

This patch adds two missing properties initializations to the device
info structure of CZ.

As we don't have CZ support yet, it isn't critical, but its important to
fix this now instead of forgetting about it later.

Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
9 years agodrm/amdkfd: make reset wavefronts per process per device
Ben Goz [Wed, 25 Mar 2015 11:12:20 +0000 (13:12 +0200)]
drm/amdkfd: make reset wavefronts per process per device

This commit moves the reset wavefront flag to per process per device
data structure, so we can support multiple devices.

Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
9 years agodrm/amdkfd: add debug print to kfd_events.c
Oded Gabbay [Thu, 30 Apr 2015 15:05:36 +0000 (18:05 +0300)]
drm/amdkfd: add debug print to kfd_events.c

Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
9 years agodrm/amdkfd: avoid CONFIG_ prefix for non-Kconfig symbols
Valentin Rothberg [Fri, 5 Jun 2015 08:27:43 +0000 (10:27 +0200)]
drm/amdkfd: avoid CONFIG_ prefix for non-Kconfig symbols

The CONFIG_ prefix is reserved for Kconfig options in Make and CPP
syntax.  Various static analysis tools rely on this naming convention
and check if CONFIG_ prefixed symbols are defined Kconfig.  Hence add
yet another prefix AMD_ to CONFIG_REG_{BASE,END,SISE} to apply to this
convention and make static analysis tools happy.

Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
9 years agodrm/amdgpu: remove unused AMDGPU_IB_FLAG_GDS
Jammy Zhou [Fri, 5 Jun 2015 20:49:22 +0000 (04:49 +0800)]
drm/amdgpu: remove unused AMDGPU_IB_FLAG_GDS

Signed-off-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/amdgpu: disable user fence interrupt (v2)
Chunming Zhou [Mon, 1 Jun 2015 06:35:03 +0000 (14:35 +0800)]
drm/amdgpu: disable user fence interrupt (v2)

amdgpu submits both kernel and user fences, but just need one interrupt,
disable user fence interrupt and don't effect user fence.

v2: fix merge error

Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/amdgpu: fix user ptr race condition
Christian König [Wed, 3 Jun 2015 19:31:20 +0000 (21:31 +0200)]
drm/amdgpu: fix user ptr race condition

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: monk liu <monk.liu@amd.com>
9 years agodrm/amdgpu: add zero timeout check in amdgpu_fence_wait_seq_timeout
Jack Xiao [Thu, 4 Jun 2015 04:18:27 +0000 (12:18 +0800)]
drm/amdgpu: add zero timeout check in amdgpu_fence_wait_seq_timeout

Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
9 years agodrm/i915/skl: Fix DMC API version in firmware file name
Rodrigo Vivi [Wed, 3 Jun 2015 23:50:19 +0000 (16:50 -0700)]
drm/i915/skl: Fix DMC API version in firmware file name

04 is the minor version. API version is ver1.
So let's follow same scheme used on published version at 01.org.

If really needed the minor version a follow-up updated will be
done. But for now we need to move fwd and unblock end users.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
9 years agovirtgpu: include linux/types.h to avoid warning.
Dave Airlie [Fri, 5 Jun 2015 02:31:12 +0000 (12:31 +1000)]
virtgpu: include linux/types.h to avoid warning.

Signed-off-by: Dave Airlie <airlied@redhat.com>
9 years agoMerge branch 'drm-next-4.2-amdgpu' of git://people.freedesktop.org/~agd5f/linux into...
Dave Airlie [Fri, 5 Jun 2015 01:14:18 +0000 (11:14 +1000)]
Merge branch 'drm-next-4.2-amdgpu' of git://people.freedesktop.org/~agd5f/linux into drm-next

This is the big pull request for amdgpu, the new driver for VI+ AMD
asics.  I currently supports Tonga, Iceland, and Carrizo and also
contains a Kconfig option to build support for CI parts for testing.

All major functionality is supported (displays, gfx, compute, dma,
video decode/encode, etc.).  Power management is working on Carrizo,
but is still being worked on for Tonga and Iceland.

* 'drm-next-4.2-amdgpu' of git://people.freedesktop.org/~agd5f/linux: (106 commits)
  drm/amdgpu: only support IBs in the buffer list (v2)
  drm/amdgpu: add vram_type and vram_bit_width for interface query (v2)
  drm/amdgpu: add ib_size/start_alignment interface query
  drm/amdgpu: add me/ce/pfp_feature_version interface query
  drm/amdgpu add ce_ram_size for interface query
  drm/amdgpu add max_memory_clock for interface query (v2)
  drm/amdgpu: add hdp flush for gfx8 compute ring
  drm/amdgpu: fix no hdp flush for compute ring
  drm/amdgpu: add HEVC/H.265 UVD support
  drm/amdgpu: stop loading firmware with pm.mutex locked
  drm/amdgpu: remove mclk_lock
  drm/amdgpu: fix description of vm_size module parameter (v2)
  drm/amdgpu: remove all sh mem register modification in vm flush
  drm/amdgpu: rename GEM_OP_SET_INITIAL_DOMAIN -> GEM_OP_SET_PLACEMENT
  drm/amdgpu: fence should be added to shared slot
  drm/amdgpu: sync fence of clear_invalids (v2)
  drm/amdgpu: max_pde_used usage should be under protect
  drm/amdgpu: fix bug of vm_bo_map (v2)
  drm/amdgpu: implement the allocation range (v3)
  drm/amdgpu: rename amdgpu_ip_funcs to amd_ip_funcs (v2)
  ...

9 years agodrm/qxl: Propagate correctly errors from qxlhw_handle_to_bo
Frediano Ziglio [Wed, 3 Jun 2015 11:09:19 +0000 (12:09 +0100)]
drm/qxl: Propagate correctly errors from qxlhw_handle_to_bo

This function could return a NULL pointer in case of handle not
present and in case of out of memory conditions however caller
function always returned EINVAL error hiding a possible ENOMEM.
This patch change the function to return the error instead to
be able to propagate the error instead of assuming EINVAL.

Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
9 years agodrm/qxl: Simplify cleaning qxl processing command
Frediano Ziglio [Wed, 3 Jun 2015 11:09:18 +0000 (12:09 +0100)]
drm/qxl: Simplify cleaning qxl processing command

In qxlhw_handle_to_bo we incremented counters twice, one time for release object
and one for reloc_info.
In the main function however reloc_info references was drop much earlier than
release so keeping the pointer only on release is safe and make cleaning
process easier.

Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
9 years agodrm/qxl: Move main reference counter to GEM object instead of TTM ones
Frediano Ziglio [Wed, 3 Jun 2015 11:09:17 +0000 (12:09 +0100)]
drm/qxl: Move main reference counter to GEM object instead of TTM ones

qxl_bo structure has two reference counters, one in the GEM object and
another in the TTM object. The GEM object keep a counter to the TTM object
so when GEM counter reached zero the TTM counter (using qxl_bo_unref) was
decremented. The qxl object is fully freed (both GEM and TTM part are cleaned)
when the TTM counter reach zero.
One issue was that surface idr structure has no owning on qxl_bo objects however
it contains a pointer to qxl_bo object. This caused some nasty race condition
for instance qxl_bo object was reaped even after counter was already zero.
This patch fix these races moving main counter (the one used by qxl_bo_(un)ref)
to GEM object which cleanup routine (qxl_gem_object_free) remove the idr pointer
(using qxl_surface_evict) when the counters are still valid.

Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
9 years agodrm/qxl: Remove format string errors
Frediano Ziglio [Wed, 3 Jun 2015 11:09:16 +0000 (12:09 +0100)]
drm/qxl: Remove format string errors

Enable format string checks for qxl_io_log and remove resulting warnings
which could lead to memory errors on different platform or just printing
wrong information.

Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
9 years agodrm/qxl: Handle correctly failures in qxl_alloc_relase_reserved
Frediano Ziglio [Wed, 3 Jun 2015 11:09:15 +0000 (12:09 +0100)]
drm/qxl: Handle correctly failures in qxl_alloc_relase_reserved

Free resources correctly if function fails

Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
9 years agodrm/qxl: Fix return for qxl_release_alloc
Frediano Ziglio [Wed, 3 Jun 2015 11:09:14 +0000 (12:09 +0100)]
drm/qxl: Fix return for qxl_release_alloc

This function return handle to allocated release object which is an int.

Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
9 years agodrm/qxl: Handle all errors in qxl_surface_evict
Frediano Ziglio [Wed, 3 Jun 2015 11:09:13 +0000 (12:09 +0100)]
drm/qxl: Handle all errors in qxl_surface_evict

Only EBUSY error was handled. This could cause code to believe
reserve was successful while it failed.

Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
9 years agodrm/qxl: Avoid double free on error
Frediano Ziglio [Wed, 3 Jun 2015 11:09:12 +0000 (12:09 +0100)]
drm/qxl: Avoid double free on error

Is we are not able to get source bo object from handle we free
destination bo object and call cleanup code however destination
object was already inserted in reloc_info array (num_relocs was
already incremented) so on cleanup we free destination again.

Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
9 years agodrm/qxl: Fix print statement not using uninitialized variable
Frediano Ziglio [Wed, 3 Jun 2015 11:09:11 +0000 (12:09 +0100)]
drm/qxl: Fix print statement not using uninitialized variable

reloc_info[i] is not still initialized in the print statement.

Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
9 years agodrm/qxl: Do not leak memory if qxl_release_list_add fails
Frediano Ziglio [Wed, 3 Jun 2015 11:09:10 +0000 (12:09 +0100)]
drm/qxl: Do not leak memory if qxl_release_list_add fails

If the function fails reference counter to the object is not decremented
causing leaks.
This is hard to spot as it happens only on very low memory situations.

Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
9 years agodrm/qxl: Do not cause spice-server to clean our objects
Frediano Ziglio [Wed, 3 Jun 2015 11:09:09 +0000 (12:09 +0100)]
drm/qxl: Do not cause spice-server to clean our objects

If objects are moved back from system memory to VRAM (and spice id
created again) memory is already initialized so we need to set flag
to not clear memory.
If you don't do it after a while using desktop many images turns to
black or transparents.

Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
9 years agodrm/amdgpu: only support IBs in the buffer list (v2)
Marek Olšák [Tue, 2 Jun 2015 15:44:49 +0000 (17:44 +0200)]
drm/amdgpu: only support IBs in the buffer list (v2)

amdgpu_cs_find_mapping doesn't work without all buffers being validated,
so the TTM validation must be done first.

v2: only use amdgpu_cs_find_mapping for UVD/VCE VM emulation

Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
9 years agodrm/amdgpu: add vram_type and vram_bit_width for interface query (v2)
Ken Wang [Wed, 3 Jun 2015 13:02:01 +0000 (21:02 +0800)]
drm/amdgpu: add vram_type and vram_bit_width for interface query (v2)

Track the type of vram on the board and provide a query for it.
User mode drivers and tools want this information for determining
bandwidth information and form informational purposes.

v2: fix build when CI support is not enabled

Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
9 years agodrm/amdgpu: add ib_size/start_alignment interface query
Ken Wang [Thu, 4 Jun 2015 13:26:57 +0000 (21:26 +0800)]
drm/amdgpu: add ib_size/start_alignment interface query

Query the IB alignment requirements from the kernel rather
than hardcoding them in the user mode drivers.

Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
9 years agodrm/amdgpu: add me/ce/pfp_feature_version interface query
Ken Wang [Wed, 3 Jun 2015 11:52:06 +0000 (19:52 +0800)]
drm/amdgpu: add me/ce/pfp_feature_version interface query

Provide this information to usermode drivers.  We were previously
missing this info.

Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
9 years agodrm/amdgpu add ce_ram_size for interface query
Ken Wang [Wed, 3 Jun 2015 09:47:54 +0000 (17:47 +0800)]
drm/amdgpu add ce_ram_size for interface query

Add a query for the CE ram size.  User mode drivers
will want to use this to determine how much size
of the cache on the CE.

Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewd-by: Jammy Zhou <Jammy.Zhou@amd.com>
9 years agodrm/amdgpu add max_memory_clock for interface query (v2)
Ken Wang [Wed, 3 Jun 2015 09:36:54 +0000 (17:36 +0800)]
drm/amdgpu add max_memory_clock for interface query (v2)

Add a query for the max memory clock.

v2: handle the dpm enabled case properly

Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewd-by: Jammy Zhou <Jammy.Zhou@amd.com>
9 years agodrm/amdgpu: add hdp flush for gfx8 compute ring
monk.liu [Wed, 3 Jun 2015 08:32:49 +0000 (16:32 +0800)]
drm/amdgpu: add hdp flush for gfx8 compute ring

We had forgotten to register the callback.

Signed-off-by: monk.liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: jammy zhou <jammy.zhou@amd.com>
9 years agodrm/amdgpu: fix no hdp flush for compute ring
monk.liu [Tue, 2 Jun 2015 07:50:33 +0000 (15:50 +0800)]
drm/amdgpu: fix no hdp flush for compute ring

No pfp on compute.

Signed-off-by: monk.liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
9 years agodrm/amdgpu: add HEVC/H.265 UVD support
Christian König [Tue, 5 May 2015 14:36:01 +0000 (16:36 +0200)]
drm/amdgpu: add HEVC/H.265 UVD support

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/amdgpu: stop loading firmware with pm.mutex locked
Christian König [Thu, 28 May 2015 20:02:26 +0000 (22:02 +0200)]
drm/amdgpu: stop loading firmware with pm.mutex locked

Loading firmware is a rather complicated process, in the end we add a
dependency between the pm mutex and the mm semaphore which results in
a harmless but annoying error message.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
9 years agodrm/amdgpu: remove mclk_lock
Christian König [Wed, 27 May 2015 08:22:47 +0000 (10:22 +0200)]
drm/amdgpu: remove mclk_lock

Not needed any more.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/amdgpu: fix description of vm_size module parameter (v2)
Alex Deucher [Mon, 11 May 2015 20:20:58 +0000 (16:20 -0400)]
drm/amdgpu: fix description of vm_size module parameter (v2)

default is 8GB, not 4GB.

v2: fix fallback setting when the user provides an invalid input

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/amdgpu: remove all sh mem register modification in vm flush
monk.liu [Wed, 27 May 2015 06:03:22 +0000 (14:03 +0800)]
drm/amdgpu: remove all sh mem register modification in vm flush

Leave that at the values set during init.  No need to update
them repeatedly.

Signed-off-by: monk.liu <monk.liu@amd.com>
Signed-off-by: David Zhang <david1.zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jammy Zhou <jammy.zhou@amd.com>
9 years agodrm/amdgpu: rename GEM_OP_SET_INITIAL_DOMAIN -> GEM_OP_SET_PLACEMENT
Marek Olšák [Wed, 27 May 2015 12:30:38 +0000 (14:30 +0200)]
drm/amdgpu: rename GEM_OP_SET_INITIAL_DOMAIN -> GEM_OP_SET_PLACEMENT

Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/amdgpu: fence should be added to shared slot
monk.liu [Tue, 26 May 2015 07:03:45 +0000 (15:03 +0800)]
drm/amdgpu: fence should be added to shared slot

Signed-off-by: monk.liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: jammy zhou <jammy.zhou@amd.com>
9 years agodrm/amdgpu: sync fence of clear_invalids (v2)
monk.liu [Tue, 26 May 2015 07:01:54 +0000 (15:01 +0800)]
drm/amdgpu: sync fence of clear_invalids (v2)

bo_va may un-initialized, fix it.

Signed-off-by: monk.liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jammy Zhou <jammy.zhou@amd.com>
9 years agodrm/amdgpu: max_pde_used usage should be under protect
monk.liu [Tue, 26 May 2015 02:22:41 +0000 (10:22 +0800)]
drm/amdgpu: max_pde_used usage should be under protect

Need to take the lock when accessing this.

Signed-off-by: monk.liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jammy Zhou <jammy.zhou@amd.com>
9 years agodrm/amdgpu: fix bug of vm_bo_map (v2)
monk.liu [Mon, 25 May 2015 06:44:05 +0000 (14:44 +0800)]
drm/amdgpu: fix bug of vm_bo_map (v2)

call reservation_object_reserve_shared before amdgpu_bo_fence

Signed-off-by: monk.liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jammy Zhou <jammy.zhou@amd.com>
9 years agodrm/amdgpu: implement the allocation range (v3)
Chunming Zhou [Fri, 24 Apr 2015 09:37:30 +0000 (17:37 +0800)]
drm/amdgpu: implement the allocation range (v3)

Pass a ttm_placement pointer to amdgpu_bo_create_restricted
add min_offset to amdgpu_bo_pin_restricted.  This makes it
easier to allocate memory with address restrictions.  With
this patch we can also enable 2-ended allocation again.

v2: fix rebase conflicts
v3: memset placements before using

Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/amdgpu: rename amdgpu_ip_funcs to amd_ip_funcs (v2)
yanyang1 [Fri, 22 May 2015 18:39:35 +0000 (14:39 -0400)]
drm/amdgpu: rename amdgpu_ip_funcs to amd_ip_funcs (v2)

The structure is renamed and moved to amd_shared.h to make
the component independent.  This makes it easier to add
new components in the future.

v2: fix include path

Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: yanyang1 <young.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/amdgpu: drop allocation flag masks
Christian König [Tue, 19 May 2015 14:08:02 +0000 (16:08 +0200)]
drm/amdgpu: drop allocation flag masks

Not needed any more.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
9 years agodrm/amdgpu: drop AMDGPU_FENCE_SIGNALED_SEQ
Christian König [Fri, 22 May 2015 08:55:47 +0000 (10:55 +0200)]
drm/amdgpu: drop AMDGPU_FENCE_SIGNALED_SEQ

It's causing issues with VMID handling and comparing the
fence value two times actually doesn't make handling faster.

Port of radeon commit "d6d5c5b8364bcc4d52cddc68bcb0a330d2af20f3".

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
9 years agodrm/amdgpu: port fault_reserve_notify changes from radeon
Christian König [Thu, 21 May 2015 15:03:46 +0000 (17:03 +0200)]
drm/amdgpu: port fault_reserve_notify changes from radeon

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/amdgpu: enable uvd dpm and powergating
Sonny Jiang [Tue, 12 May 2015 20:13:35 +0000 (16:13 -0400)]
drm/amdgpu: enable uvd dpm and powergating

Enable UVD dpm (dynamic power management) and powergating.  UVD dpm dynamically scales the UVD
clocks on demand.  Powergating turns off the power to the block when it's not in use.

Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/amdgpu: implement VCE two instances support
Leo Liu [Wed, 6 May 2015 19:20:41 +0000 (15:20 -0400)]
drm/amdgpu: implement VCE two instances support

VCE 3.0 has two indentical instances in the engine, they share
the same registers name in differrent memory block distinguished
by the grbm_gfx_index, we set to master instance after init, it
will dispatch task to slave instance. These two instances will
share the same firmware, but have their own stacks and heaps.

v2: add mutex for using grbm_gfx_index

Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
9 years agodrm/amdgpu: recalculate VCE firmware BO size
Leo Liu [Wed, 6 May 2015 18:31:27 +0000 (14:31 -0400)]
drm/amdgpu: recalculate VCE firmware BO size

Firmware required BO size changes in terms of ASIC family

Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
9 years agodrm/amdgpu: remove unused TRACE_SYSTEM_STRING define
Alex Deucher [Thu, 21 May 2015 06:24:48 +0000 (02:24 -0400)]
drm/amdgpu: remove unused TRACE_SYSTEM_STRING define

Port of 77cb2fea1e5fc4b083dd967f231bbf6edd96150e to
amdgpu.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/amdgpu: rework tiling flags
Marek Olšák [Thu, 14 May 2015 21:48:26 +0000 (23:48 +0200)]
drm/amdgpu: rework tiling flags

Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>