Feng Tang [Sun, 3 Feb 2013 06:38:21 +0000 (14:38 +0800)]
perf report: Enable the runtime switching of perf data file
This is for tui browser only. This patch will check the returned key of
tui hists browser, if it's K_SWITH_INPUT_DATA, then recreate a session
for the new selected data file.
V2: Move the setup_brower() before the "repeat" jump point.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1359873501-24541-2-git-send-email-feng.tang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Feng Tang [Sun, 3 Feb 2013 06:38:20 +0000 (14:38 +0800)]
perf hists browser: Add option for runtime switching perf data file
Based on perf report/top/scripts browser integration idea from acme.
This will enable user to runtime switch the data file, when this option
is selected, it will popup all the legal data files in current working
directory, and the filename selected by user is saved in the global
variable "input_name", and a new key 'K_SWITCH_INPUT_DATA' will be
passed back to the built-in command which will perform the switch.
This initial version only enables it for 'perf report'.
v2: rebase to latest 'perf/core' branch (
6e1d4dd) of acme's perf tree
Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1359873501-24541-1-git-send-email-feng.tang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jacob Shin [Wed, 6 Feb 2013 17:26:28 +0000 (11:26 -0600)]
perf/x86: Allow for architecture specific RDPMC indexes
Similar to config_base and event_base, allow architecture
specific RDPMC ECX values.
Signed-off-by: Jacob Shin <jacob.shin@amd.com>
Acked-by: Stephane Eranian <eranian@google.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1360171589-6381-6-git-send-email-jacob.shin@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Jacob Shin [Wed, 6 Feb 2013 17:26:27 +0000 (11:26 -0600)]
perf/x86: Move MSR address offset calculation to architecture specific files
Move counter index to MSR address offset calculation to
architecture specific files. This prepares the way for
perf_event_amd to enable counter addresses that are not
contiguous -- for example AMD Family 15h processors have 6 core
performance counters starting at 0xc0010200 and 4 northbridge
performance counters starting at 0xc0010240.
Signed-off-by: Jacob Shin <jacob.shin@amd.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Stephane Eranian <eranian@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1360171589-6381-5-git-send-email-jacob.shin@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Jacob Shin [Wed, 6 Feb 2013 17:26:26 +0000 (11:26 -0600)]
perf/x86/amd: Use proper naming scheme for AMD bit field definitions
Update these AMD bit field names to be consistent with naming
convention followed by the rest of the file.
Signed-off-by: Jacob Shin <jacob.shin@amd.com>
Acked-by: Stephane Eranian <eranian@google.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1360171589-6381-4-git-send-email-jacob.shin@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Robert Richter [Wed, 6 Feb 2013 17:26:25 +0000 (11:26 -0600)]
perf/x86/amd: Generalize northbridge constraints code for family 15h
Generalize northbridge constraints code for family 10h so that
later we can reuse the same code path with other AMD processor
families that have the same northbridge event constraints.
Signed-off-by: Robert Richter <rric@kernel.org>
Signed-off-by: Jacob Shin <jacob.shin@amd.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Stephane Eranian <eranian@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1360171589-6381-3-git-send-email-jacob.shin@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Robert Richter [Wed, 6 Feb 2013 17:26:24 +0000 (11:26 -0600)]
perf/x86/amd: Rework northbridge event constraints handler
Code simplification. No functional changes.
Signed-off-by: Robert Richter <rric@kernel.org>
Signed-off-by: Jacob Shin <jacob.shin@amd.com>
Acked-by: Stephane Eranian <eranian@google.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Robert Richter <rric@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1360171589-6381-2-git-send-email-jacob.shin@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Sukadev Bhattiprolu [Tue, 5 Feb 2013 23:04:49 +0000 (15:04 -0800)]
perf/powerpc: Fix build error
Fix compile errors like those below:
CC arch/powerpc/perf/power7-pmu.o
/home/git/linux/arch/powerpc/perf/power7-pmu.c:397:2: error: initialization from incompatible pointer type [-Werror]
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: linuxppc-dev@ozlabs.org
Link: http://lkml.kernel.org/r/20130205231938.GA24125@us.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Sun, 3 Feb 2013 10:14:06 +0000 (11:14 +0100)]
Merge branch 'tip/perf/core' of git://git./linux/kernel/git/rostedt/linux-trace into perf/core
Pull tracing updated from Steve Rostedt.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Steven Rostedt (Red Hat) [Fri, 1 Feb 2013 23:38:47 +0000 (18:38 -0500)]
tracing: Init current_trace to nop_trace and remove NULL checks
On early boot up, when the ftrace ring buffer is initialized, the
static variable current_trace is initialized to &nop_trace.
Before this initialization, current_trace is NULL and will never
become NULL again. It is always reassigned to a ftrace tracer.
Several places check if current_trace is NULL before it uses
it, and this check is frivolous, because at the point in time
when the checks are made the only way current_trace could be
NULL is if ftrace failed its allocations at boot up, and the
paths to these locations would probably not be possible.
By initializing current_trace to &nop_trace where it is declared,
current_trace will never be NULL, and we can remove all these
checks of current_trace being NULL which never needed to be
checked in the first place.
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Ingo Molnar [Fri, 1 Feb 2013 10:17:09 +0000 (11:17 +0100)]
Merge tag 'perf-core-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
. Make some POWER7 events available in sysfs, equivalent to
what was done on x86, from Sukadev Bhattiprolu.
. Add event group view, from Namyung Kim:
To use it, 'perf record' should group events when recording. And then perf
report parses the saved group relation from file header and prints them
together if --group option is provided. You can use 'perf evlist' command to
see event group information:
$ perf record -e '{ref-cycles,cycles}' noploop 1
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.385 MB perf.data (~16807 samples) ]
$ perf evlist --group
{ref-cycles,cycles}
With this example, default perf report will show you each event
separately like this:
$ perf report
...
# group: {ref-cycles,cycles}
# ========
# Samples: 3K of event 'ref-cycles'
# Event count (approx.):
3153797218
#
# Overhead Command Shared Object Symbol
# ........ ....... ................. ..........................
99.84% noploop noploop [.] main
0.07% noploop ld-2.15.so [.] strcmp
0.03% noploop [kernel.kallsyms] [k] timerqueue_del
0.03% noploop [kernel.kallsyms] [k] sched_clock_cpu
0.02% noploop [kernel.kallsyms] [k] account_user_time
0.01% noploop [kernel.kallsyms] [k] __alloc_pages_nodemask
0.00% noploop [kernel.kallsyms] [k] native_write_msr_safe
# Samples: 3K of event 'cycles'
# Event count (approx.):
3722310525
#
# Overhead Command Shared Object Symbol
# ........ ....... ................. .........................
99.76% noploop noploop [.] main
0.11% noploop [kernel.kallsyms] [k] _raw_spin_lock
0.06% noploop [kernel.kallsyms] [k] find_get_page
0.03% noploop [kernel.kallsyms] [k] sched_clock_cpu
0.02% noploop [kernel.kallsyms] [k] rcu_check_callbacks
0.02% noploop [kernel.kallsyms] [k] __current_kernel_time
0.00% noploop [kernel.kallsyms] [k] native_write_msr_safe
In this case the event group information will be shown in the end of
header area. So you can use --group option to enable event group view.
$ perf report --group
...
# group: {ref-cycles,cycles}
# ========
# Samples: 7K of event 'anon group { ref-cycles, cycles }'
# Event count (approx.):
6876107743
#
# Overhead Command Shared Object Symbol
# ................ ....... ................. ..........................
99.84% 99.76% noploop noploop [.] main
0.07% 0.00% noploop ld-2.15.so [.] strcmp
0.03% 0.00% noploop [kernel.kallsyms] [k] timerqueue_del
0.03% 0.03% noploop [kernel.kallsyms] [k] sched_clock_cpu
0.02% 0.00% noploop [kernel.kallsyms] [k] account_user_time
0.01% 0.00% noploop [kernel.kallsyms] [k] __alloc_pages_nodemask
0.00% 0.00% noploop [kernel.kallsyms] [k] native_write_msr_safe
0.00% 0.11% noploop [kernel.kallsyms] [k] _raw_spin_lock
0.00% 0.06% noploop [kernel.kallsyms] [k] find_get_page
0.00% 0.02% noploop [kernel.kallsyms] [k] rcu_check_callbacks
0.00% 0.02% noploop [kernel.kallsyms] [k] __current_kernel_time
As you can see the Overhead column now contains both of ref-cycles and
cycles and header line shows group information also - 'anon group {
ref-cycles, cycles }'. The output is sorted by period of group leader
first.
If perf.data file doesn't contain group information, this --group
option does nothing. So if you want enable event group view by
default you can set it in ~/.perfconfig file:
$ cat ~/.perfconfig
[report]
group = true
It can be overridden with command line if you want:
$ perf report --no-group
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Sukadev Bhattiprolu [Wed, 23 Jan 2013 06:26:45 +0000 (22:26 -0800)]
perf: Document the ABI of perf sysfs entries
This patchset addes two new sets of files to sysfs for POWER architecture.
- perf event config format in /sys/devices/cpu/format/event
- generic and POWER-specific perf events in /sys/devices/cpu/events/
The format of the first file is already documented in:
sysfs-bus-event_source-devices-format
Document the format of the second set of files '/sys/devices/cpu/events/*'
which would also become part of the ABI.
Changelog[v4]:
[Jiri Olsa]: Mention that multiple event= like terms can be specified
in the 'events' file.
[Jiri Olsa]: Remove the documentation for the 'config format' file
as it is already documented in 'Documentation/ABI/testing/'.
[Jiri Olsa]: Move ABI documentation from 'stable/' to 'testing/'
Changelog[v3]:
[Greg KH] Include ABI documentation.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anton Blanchard <anton@au1.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: linuxppc-dev@ozlabs.org
Link: http://lkml.kernel.org/r/20130123062645.GG13720@us.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sukadev Bhattiprolu [Wed, 23 Jan 2013 06:25:29 +0000 (22:25 -0800)]
perf/POWER7: Make some POWER7 events available in sysfs
Make some POWER7-specific perf events available in sysfs.
$ /bin/ls -1 /sys/bus/event_source/devices/cpu/events/
branch-instructions
branch-misses
cache-misses
cache-references
cpu-cycles
instructions
PM_BRU_FIN
PM_BRU_MPRED
PM_CMPLU_STALL
PM_CYC
PM_GCT_NOSLOT_CYC
PM_INST_CMPL
PM_LD_MISS_L1
PM_LD_REF_L1
stalled-cycles-backend
stalled-cycles-frontend
where the 'PM_*' events are POWER specific and the others are the
generic events.
This will enable users to specify these events with their symbolic
names rather than with their raw code.
perf stat -e 'cpu/PM_CYC' ...
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anton Blanchard <anton@au1.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: linuxppc-dev@ozlabs.org
Link: http://lkml.kernel.org/r/20130123062528.GE13720@us.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sukadev Bhattiprolu [Wed, 23 Jan 2013 06:24:54 +0000 (22:24 -0800)]
perf/POWER7: Make generic event translations available in sysfs
Make the generic perf events in POWER7 available via sysfs.
$ ls /sys/bus/event_source/devices/cpu/events
branch-instructions
branch-misses
cache-misses
cache-references
cpu-cycles
instructions
stalled-cycles-backend
stalled-cycles-frontend
$ cat /sys/bus/event_source/devices/cpu/events/cache-misses
event=0x400f0
This patch is based on commits that implement this functionality on x86.
Eg:
commit
a47473939db20e3961b200eb00acf5fcf084d755
Author: Jiri Olsa <jolsa@redhat.com>
Date: Wed Oct 10 14:53:11 2012 +0200
perf/x86: Make hardware event translations available in sysfs
Changelog:[v2]
[Jiri Osla] Drop EVENT_ID() macro since it is only used once.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anton Blanchard <anton@au1.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: linuxppc-dev@ozlabs.org
Link: http://lkml.kernel.org/r/20130123062454.GD13720@us.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sukadev Bhattiprolu [Wed, 23 Jan 2013 06:24:23 +0000 (22:24 -0800)]
perf: Make EVENT_ATTR global
Rename EVENT_ATTR() to PMU_EVENT_ATTR() and make it global so it is
available to all architectures.
Further to allow architectures flexibility, have PMU_EVENT_ATTR() pass
in the variable name as a parameter.
Changelog[v2]
- [Jiri Olsa] No need to define PMU_EVENT_PTR()
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anton Blanchard <anton@au1.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: linuxppc-dev@ozlabs.org
Link: http://lkml.kernel.org/r/20130123062422.GC13720@us.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sukadev Bhattiprolu [Wed, 23 Jan 2013 06:23:53 +0000 (22:23 -0800)]
perf/Power7: Use macros to identify perf events
Define and use macros to identify perf events codes This would make it
easier and more readable when these event codes need to be used in more
than one place.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anton Blanchard <anton@au1.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: linuxppc-dev@ozlabs.org
Link: http://lkml.kernel.org/r/20130123062353.GB13720@us.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Tue, 22 Jan 2013 09:09:47 +0000 (18:09 +0900)]
perf evlist: Add --group option
Add '-g/--group' option for showing event groups. For simplicity it is
currently not compatible with other options.
$ perf evlist --group
{ref-cycles,cycles}
$ perf evlist
ref-cycles
cycles
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-20-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Tue, 22 Jan 2013 09:09:46 +0000 (18:09 +0900)]
perf report: Add report.group config option
Add report.group config option for setting default value of event
group view. It affects the report output only if perf.data contains
event group info.
A user can write .perfconfig file like below to enable group view by
default:
$ cat ~/.perfconfig
[report]
group = true
And it can be disabled through command line:
$ perf report --no-group
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-19-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Tue, 22 Jan 2013 09:09:45 +0000 (18:09 +0900)]
perf report: Add --group option
Add --group option to enable event grouping. When enabled, all the
group members information will be shown together with the leader.
$ perf report --group
...
# group: {ref-cycles,cycles}
# ========
#
# Samples: 7K of event 'anon group { ref-cycles, cycles }'
# Event count (approx.):
6876107743
#
# Overhead Command Shared Object Symbol
# ................ ....... ................. ..........................
#
99.84% 99.76% noploop noploop [.] main
0.07% 0.00% noploop ld-2.15.so [.] strcmp
0.03% 0.00% noploop [kernel.kallsyms] [k] timerqueue_del
0.03% 0.03% noploop [kernel.kallsyms] [k] sched_clock_cpu
0.02% 0.00% noploop [kernel.kallsyms] [k] account_user_time
0.01% 0.00% noploop [kernel.kallsyms] [k] __alloc_pages_nodemask
0.00% 0.00% noploop [kernel.kallsyms] [k] native_write_msr_safe
0.00% 0.11% noploop [kernel.kallsyms] [k] _raw_spin_lock
0.00% 0.06% noploop [kernel.kallsyms] [k] find_get_page
0.00% 0.02% noploop [kernel.kallsyms] [k] rcu_check_callbacks
0.00% 0.02% noploop [kernel.kallsyms] [k] __current_kernel_time
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-18-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Tue, 22 Jan 2013 09:09:44 +0000 (18:09 +0900)]
perf report: Show group description when event group is enabled
When using event group viewer, it's better to show the group description
rather than the leader information alone.
If a leader did not contain any member, it's a non-group event.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-17-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Tue, 22 Jan 2013 09:09:43 +0000 (18:09 +0900)]
perf report: Bypass non-leader events when event group is enabled
Since we have all necessary information in the leader events and other
members don't, bypass members. Member events will be shown along with
the leaders if event group is enabled.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-16-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Tue, 22 Jan 2013 09:09:42 +0000 (18:09 +0900)]
perf gtk/browser: Trim column header string when event group enabled
When event group feature is enabled, each column header is expanded to
match with the whole group column width. But this is not needed for
GTK+ browser since ti usually use variable-width fonts. So trim it.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-15-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Tue, 22 Jan 2013 09:09:40 +0000 (18:09 +0900)]
perf gtk/browser: Add support for event group view
Show group members's overhead also when showing leader's if event
group is enabled.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranina@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-13-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Tue, 22 Jan 2013 09:09:39 +0000 (18:09 +0900)]
perf hists browser: Add suppport for event group view
Show group members' overhead also when showing the leader's if event
group is enabled.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-12-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Tue, 22 Jan 2013 09:09:38 +0000 (18:09 +0900)]
perf hists browser: Move coloring logic to hpp functions
Move coloring logic into the hpp functions so that each value can
be colored independently. It'd required for event group view.
For overhead column, add a callback for printing 'folded_sign' of
callchains of a hist entry.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1358845787-1350-11-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Tue, 22 Jan 2013 09:09:37 +0000 (18:09 +0900)]
perf ui/hist: Add support for event group view
Show group member's overhead also when showing the leader's if event
group is enabled.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-10-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Tue, 22 Jan 2013 09:09:36 +0000 (18:09 +0900)]
perf gtk/browser: Convert hpp helpers to a function
The hpp helpers do same job for each field so it was implemented as
macro in order to access those fields easily. But it gets cumbersome to
maintain a large function in a macro as the function grows. Factor it
out to a function with a little helper macro to access field.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-9-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Tue, 22 Jan 2013 09:09:35 +0000 (18:09 +0900)]
perf hists browser: Convert hpp helpers to a function
The hpp helpers do same job for each field so it was implemented as
macro in order to access those fields easily. But it gets cumbersome
to maintain a large function in a macro as the function grows. Factor
it out to a function with a little helper macro to access field.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-8-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Tue, 22 Jan 2013 09:09:34 +0000 (18:09 +0900)]
perf ui/hist: Consolidate hpp helpers
Most of hpp helper functions do same jobs for different fields thus
consolidate them to appropriate functions/macros.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-7-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Tue, 22 Jan 2013 09:09:33 +0000 (18:09 +0900)]
perf hists: Resort hist entries using group members for output
When event group is enabled, sorting hist entries on periods for output
should consider groups members' period also. To do that, build period
table using link/pair information and compare the table.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Tue, 22 Jan 2013 09:09:32 +0000 (18:09 +0900)]
perf report: Make another loop for linking group hists
Now the event grouping viewing requires linking all member hists in a
group to the leader's. Thus hists__output_resort should be called after
linking all events in evlist.
Introduce symbol_conf.event_group flag to determine whether the feature
is enabled or not.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Tue, 22 Jan 2013 09:09:31 +0000 (18:09 +0900)]
perf header: Add HEADER_GROUP_DESC feature
Save group relationship information so that it can be restored when perf
report is running.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Tue, 22 Jan 2013 09:09:30 +0000 (18:09 +0900)]
perf tests: Add group test conditions
As some new fields for handling groups added, check them to be sure to
have valid values in test__group* cases.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Tue, 22 Jan 2013 09:09:29 +0000 (18:09 +0900)]
perf tools: Keep group information
Add a few of group-related field in struct perf_{evlist,evsel} so that
the group information in a evlist can be known easily. It only counts
groups which have more than 1 members since leader-only groups are
treated as non-group events.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Wed, 30 Jan 2013 17:01:20 +0000 (14:01 -0300)]
perf top: Delete maps on exit
Removing one more memory leak found with valgrind.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-gnb1gms0k8wictmtm2umpr8u@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Wed, 30 Jan 2013 16:25:53 +0000 (13:25 -0300)]
perf top: Stop using exit()
Just return to the perf main() routine so that an unified exit path can
be followed and resources released, helping in finding memory leaks.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ro8oeodo96490nrhcph57atr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar [Thu, 31 Jan 2013 09:20:14 +0000 (10:20 +0100)]
Merge tag 'perf-core-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
. Fix some leaks in exit paths.
. Use memdup where applicable
. Remove some die() calls, allowing callers to handle exit paths
gracefully.
. Correct typo in tools Makefile, fix from Borislav Petkov.
. Add 'perf bench numa mem' NUMA performance measurement suite, from Ingo Molnar.
. Handle dynamic array's element size properly, fix from Jiri Olsa.
. Fix memory leaks on evsel->counts, from Namhyung Kim.
. Make numa benchmark optional, allowing the build in machines where required
numa libraries are not present, fix from Peter Hurley.
. Add interval printing in 'perf stat', from Stephane Eranian.
. Fix compile warnings in tests/attr.c, from Sukadev Bhattiprolu.
. Fix double free, pclose instead of fclose, leaks and double fclose errors
found with the cppcheck tool, from Thomas Jarosch.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Hiraku Toyooka [Wed, 26 Dec 2012 02:53:09 +0000 (11:53 +0900)]
tracing: Add documentation of snapshot utility
This patch adds snapshot description in ftrace documentation.
This description includes what the snapshot is and how to use it.
Link: http://lkml.kernel.org/r/20121226025309.3252.150.stgit@liselsia
Cc: Rob Landley <rob@landley.net>
Signed-off-by: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Hiraku Toyooka [Wed, 26 Dec 2012 02:53:00 +0000 (11:53 +0900)]
tracing: Make a snapshot feature available from userspace
Ftrace has a snapshot feature available from kernel space and
latency tracers (e.g. irqsoff) are using it. This patch enables
user applictions to take a snapshot via debugfs.
Add "snapshot" debugfs file in "tracing" directory.
snapshot:
This is used to take a snapshot and to read the output of the
snapshot.
# echo 1 > snapshot
This will allocate the spare buffer for snapshot (if it is
not allocated), and take a snapshot.
# cat snapshot
This will show contents of the snapshot.
# echo 0 > snapshot
This will free the snapshot if it is allocated.
Any other positive values will clear the snapshot contents if
the snapshot is allocated, or return EINVAL if it is not allocated.
Link: http://lkml.kernel.org/r/20121226025300.3252.86850.stgit@liselsia
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: David Sharp <dhsharp@google.com>
Signed-off-by: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
[
Fixed irqsoff selftest and also a conflict with a change
that fixes the update_max_tr.
]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Hiraku Toyooka [Wed, 26 Dec 2012 02:52:52 +0000 (11:52 +0900)]
tracing: Replace static old_tracer check of tracer name
Currently the trace buffer read functions use a static variable
"old_tracer" for detecting if the current tracer changes. This
was suitable for a single trace file ("trace"), but to add a
snapshot feature that will use the same function for its file,
a check against a static variable is not sufficient.
To use the output functions for two different files, instead of
storing the current tracer in a static variable, as the trace
iterator descriptor contains a pointer to the original current
tracer's name, that pointer can now be used to check if the
current tracer has changed between different reads of the trace
file.
Link: http://lkml.kernel.org/r/20121226025252.3252.9276.stgit@liselsia
Signed-off-by: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Namhyung Kim [Thu, 27 Dec 2012 02:49:45 +0000 (11:49 +0900)]
tracing: Use sched_clock_cpu for trace_clock_global
For systems with an unstable sched_clock, all cpu_clock() does is enable/
disable local irq during the call to sched_clock_cpu(). And for stable
systems they are same.
trace_clock_global() already disables interrupts, so it can call
sched_clock_cpu() directly.
Link: http://lkml.kernel.org/r/1356576585-28782-2-git-send-email-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Steven Rostedt (Red Hat) [Tue, 29 Jan 2013 22:45:49 +0000 (17:45 -0500)]
ring-buffer: Add stats field for amount read from trace ring buffer
Add a stat about the number of events read from the ring buffer:
# cat /debug/tracing/per_cpu/cpu0/stats
entries: 39869
overrun: 870512
commit overrun: 0
bytes:
1449912
oldest event ts: 6561.368690
now ts: 6565.246426
dropped events: 0
read events: 112 <-- Added
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Thomas Jarosch [Mon, 28 Jan 2013 09:21:14 +0000 (10:21 +0100)]
perf header: Fix double fclose() on do_write(fd, xxx) failure
cppcheck reported:
[util/header.c:983]: (error) Used file that is not opened.
Thanks to Arnaldo Carvalho de Melo for pointing out that
fclose(NULL) is undefined behavior -> protect against it.
Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com>
Link: http://lkml.kernel.org/r/1751778.SZQB4fNdIh@storm
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Thomas Jarosch [Fri, 25 Jan 2013 10:21:39 +0000 (11:21 +0100)]
perf header: Fix memory leak for the "Not caching a kptr_restrict'ed /proc/kallsyms" case
cppcheck reported:
[util/header.c:316]: (error) Memory leak: filename
[util/header.c:316]: (error) Memory leak: linkname
Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com>
Link: http://lkml.kernel.org/r/9377388.0eFDp53iW6@storm
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Thomas Jarosch [Fri, 25 Jan 2013 10:20:47 +0000 (11:20 +0100)]
perf tools: Fix memory leak on error
cppcheck reported:
[util/event.c:480]: (error) Memory leak: event
Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com>
Link: http://lkml.kernel.org/r/2717013.8dV0naNhAV@storm
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Thomas Jarosch [Fri, 25 Jan 2013 10:02:13 +0000 (11:02 +0100)]
perf sort: Use pclose() instead of fclose() on pipe stream
cppcheck message:
[tools/perf/util/sort.c:277]: (error) Mismatching allocation and deallocation: fp
Also fix descriptor leak on error and always initialize the "fp" variable.
Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com>
Link: http://lkml.kernel.org/r/1359112354.yZcisNZ4k0@storm
Link: http://lkml.kernel.org/r/2266358.qvDXKLvJ67@storm
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Thomas Jarosch [Fri, 25 Jan 2013 09:57:08 +0000 (10:57 +0100)]
perf tools: Fix possible double free on error
Can only be triggered via CROSS_COMPILE env var.
Detected by cppcheck.
Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com>
Link: http://lkml.kernel.org/r/36736865.AIlztKhDqN@storm
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sukadev Bhattiprolu [Thu, 24 Jan 2013 05:44:39 +0000 (21:44 -0800)]
perf tools, powerpc: Fix compile warnings in tests/attr.c
We print several '__u64' quantities using '%llu'. On powerpc, we by
default include '<asm-generic/int-l64.h> which results in __u64 being an
unsigned long. This causes compile warnings which are treated as errors
due to '-Werror'.
By defining __SANE_USERSPACE_TYPES__ we include <asm-generic/int-ll64.h>
and define __u64 as unsigned long long.
Changelog[v2]:
[Michael Ellerman] Use __SANE_USERSPACE_TYPES__ and avoid PRIu64
format specifier - which as Jiri Olsa pointed out, breaks on x86-64.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Anton Blanchard <anton@au1.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Ellerman <ellerman@au1.ibm.com>
Cc: linuxppc-dev@ozlabs.org
Link: http://lkml.kernel.org/r/20130124054439.GA31588@us.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Fri, 25 Jan 2013 01:44:44 +0000 (10:44 +0900)]
perf evsel: Fix memory leaks on evsel->counts
The ->counts field was never freed in the current code. Add
perf_evsel__free_counts() function to free it properly.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1359078284-32080-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stephane Eranian [Tue, 29 Jan 2013 11:47:44 +0000 (12:47 +0100)]
perf stat: Add interval printing
This patch adds a new printing mode for perf stat. It allows interval
printing. That means perf stat can now print event deltas at regular
time interval. This is useful to detect phases in programs.
The -I option enables interval printing. It expects an interval duration
in milliseconds. Minimum is 100ms. Once, activated perf stat prints
events deltas since last printout. All modes are supported.
$ perf stat -I 1000 -e cycles noploop 10
noploop for 10 seconds
# time counts events
1.
000109853 2,388,560,546 cycles
2.
000262846 2,393,332,358 cycles
3.
000354131 2,393,176,537 cycles
4.
000439503 2,393,203,790 cycles
5.
000527075 2,393,167,675 cycles
6.
000609052 2,393,203,670 cycles
7.
000691082 2,393,175,678 cycles
The output format makes it easy to feed into a plotting program such as
gnuplot when the -I option is used in combination with the -x option:
$ perf stat -x, -I 1000 -e cycles noploop 10
noploop for 10 seconds
1.
000084113,
2378775498,cycles
2.
000245798,
2391056897,cycles
3.
000354445,
2392089414,cycles
4.
000459115,
2390936603,cycles
5.
000565341,
2392108173,cycles
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1359460064-3060-3-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stephane Eranian [Tue, 29 Jan 2013 11:47:43 +0000 (12:47 +0100)]
perf evsel: Add prev_raw_count field
This field will be used by commands which print counter deltas on
regular timer intervals, such as perf stat -I.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1359460064-3060-2-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Peter Hurley [Mon, 28 Jan 2013 01:51:22 +0000 (20:51 -0500)]
perf tools: Make numa benchmark optional
Commit "perf: Add 'perf bench numa mem'..." added a NUMA performance
benchmark to perf. Make this optional and test for required
dependencies.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1359337882-21821-1-git-send-email-peter@hurleysoftware.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar [Thu, 6 Dec 2012 12:51:59 +0000 (13:51 +0100)]
perf: Add 'perf bench numa mem' NUMA performance measurement suite
Add a suite of NUMA performance benchmarks.
The goal was simulate the behavior and access patterns of real NUMA
workloads, via a wide range of parameters, so this tool goes well
beyond simple bzero() measurements that most NUMA micro-benchmarks use:
- It processes the data and creates a chain of data dependencies,
like a real workload would. Neither the compiler, nor the
kernel (via KSM and other optimizations) nor the CPU can
eliminate parts of the workload.
- It randomizes the initial state and also randomizes the target
addresses of the processing - it's not a simple forward scan
of addresses.
- It provides flexible options to set process, thread and memory
relationship information: -G sets "global" memory shared between
all test processes, -P sets "process" memory shared by all
threads of a process and -T sets "thread" private memory.
- There's a NUMA convergence monitoring and convergence latency
measurement option via -c and -m.
- Micro-sleeps and synchronization can be injected to provoke lock
contention and scheduling, via the -u and -S options. This simulates
IO and contention.
- The -x option instructs the workload to 'perturb' itself artificially
every N seconds, by moving to the first and last CPU of the system
periodically. This way the stability of convergence equilibrium and
the number of steps taken for the scheduler to reach equilibrium again
can be measured.
- The amount of work can be specified via the -l loop count, and/or
via a -s seconds-timeout value.
- CPU and node memory binding options, to test hard binding scenarios.
THP can be turned on and off via madvise() calls.
- Live reporting of convergence progress in an 'at glance' output format.
Printing of convergence and deconvergence events.
The 'perf bench numa mem -a' option will start an array of about 30
individual tests that will each output such measurements:
# Running 5x5-bw-thread, "perf bench numa mem -p 5 -t 5 -P 512 -s 20 -zZ0q --thp 1"
5x5-bw-thread, 20.276, secs, runtime-max/thread
5x5-bw-thread, 20.004, secs, runtime-min/thread
5x5-bw-thread, 20.155, secs, runtime-avg/thread
5x5-bw-thread, 0.671, %, spread-runtime/thread
5x5-bw-thread, 21.153, GB, data/thread
5x5-bw-thread, 528.818, GB, data-total
5x5-bw-thread, 0.959, nsecs, runtime/byte/thread
5x5-bw-thread, 1.043, GB/sec, thread-speed
5x5-bw-thread, 26.081, GB/sec, total-speed
See the help text and the code for more details.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Borislav Petkov [Tue, 29 Jan 2013 10:48:11 +0000 (11:48 +0100)]
tools: Correct typo in tools Makefile
It should be
make -C tools/ <tool>_install
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1359456492-22156-1-git-send-email-bp@alien8.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Fri, 25 Jan 2013 16:10:00 +0000 (13:10 -0300)]
perf tests: Fix leaks on PERF_RECORD_* test
This test:
7: Validate PERF_RECORD_* events & perf_sample fields
needs to call perf_evlist__delete_maps().
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-t3181qy15avffdacqjcxfku2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Steven Rostedt (Red Hat) [Tue, 29 Jan 2013 22:30:31 +0000 (17:30 -0500)]
tracing/fgraph: Adjust fgraph depth before calling trace return callback
While debugging the virtual cputime with the function graph tracer
with a max_depth of 1 (most common use of the max_depth so far),
I found that I was missing kernel execution because of a race condition.
The code for the return side of the function has a slight race:
ftrace_pop_return_trace(&trace, &ret, frame_pointer);
trace.rettime = trace_clock_local();
ftrace_graph_return(&trace);
barrier();
current->curr_ret_stack--;
The ftrace_pop_return_trace() initializes the trace structure for
the callback. The ftrace_graph_return() uses the trace structure
for its own use as that structure is on the stack and is local
to this function. Then the curr_ret_stack is decremented which
is what the trace.depth is set to.
If an interrupt comes in after the ftrace_graph_return() but
before the curr_ret_stack, then the called function will get
a depth of 2. If max_depth is set to 1 this function will be
ignored.
The problem is that the trace has already been called, and the
timestamp for that trace will not reflect the time the function
was about to re-enter userspace. Calls to the interrupt will not
be traced because the max_depth has prevented this.
To solve this issue, the ftrace_graph_return() can safely be
moved after the current->curr_ret_stack has been updated.
This way the timestamp for the return callback will reflect
the actual time.
If an interrupt comes in after the curr_ret_stack update and
ftrace_graph_return(), it will be traced. It may look a little
confusing to see it within the other function, but at least
it will not be lost.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Jovi Zhang [Fri, 25 Jan 2013 10:03:07 +0000 (18:03 +0800)]
tracing: Remove second iterator initializer
The trace iterator is already initialized by trace_init_global_iter(),
so there is no need to initialize it again.
Link: http://lkml.kernel.org/r/CACV3sb+G1YnO6168JhY3dEadmJi58pA5-2cSZT8E0WVHJNFt9Q@mail.gmail.com
Signed-off-by: Jovi Zhang <bookjovi@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Shan Wei [Mon, 19 Nov 2012 05:21:01 +0000 (13:21 +0800)]
tracing: Use __this_cpu_inc/dec operation instead of __get_cpu_var
__this_cpu_inc_return() or __this_cpu_dec generates a single instruction,
which is faster than __get_cpu_var operation.
Link: http://lkml.kernel.org/r/50A9C1BD.1060308@gmail.com
Reviewed-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Shan Wei <davidshan@tencent.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Steven Rostedt [Fri, 25 Jan 2013 14:46:36 +0000 (09:46 -0500)]
tracing: Remove tracepoint sample code
The tracepoint sample code was used to teach developers how to
create their own tracepoints. But now the trace_events have been
added as a higher level that is used directly by developers today.
Only the trace_event code should use the tracepoint interface
directly and no new tracepoints should be added.
Besides, the example had a race condition with the use of the
->d_name.name dentry field, as pointed out by Al Viro.
Best just to remove the code so it wont be used by other developers.
Link: http://lkml.kernel.org/r/20130123225523.GY4939@ZenIV.linux.org.uk
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Arnaldo Carvalho de Melo [Fri, 25 Jan 2013 02:01:50 +0000 (23:01 -0300)]
perf tests: Call machine__exit in the vmlinux matches kallsyms test
Removing leaks with valgrind.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-x9hja7wxwexe8ca9v2j8qtlg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Fri, 25 Jan 2013 01:45:21 +0000 (22:45 -0300)]
perf ui browser: Free browser->helpline() on ui_browser__hide()
It is allocated at ui_browser__show(), so free it in its counterpart,
ui_browser__hide().
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-g449kvnbcpli4ceyxbe2jp1e@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Fri, 25 Jan 2013 01:34:33 +0000 (22:34 -0300)]
perf header: Stop using die() calls when processing tracing data
The callers of this function (perf_event__process_tracing_data) already
handles a negative value return as error, so just use pr_err() to log
the problem and return -1 instead of panic'ing.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-eeeljnecpi0zi5s7ux1mzdv9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Fri, 25 Jan 2013 01:24:57 +0000 (22:24 -0300)]
perf kmem: Use memdup()
Instead of hand coded equivalent.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-42ldngi973f4ssvzlklo8t2k@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Fri, 25 Jan 2013 01:16:43 +0000 (22:16 -0300)]
perf tools: Use memdup in map__clone
We have memdup() exactly for that, remove open coded dup.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-tnsoexrgv6u9l125srq2c7su@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Fri, 25 Jan 2013 00:59:59 +0000 (21:59 -0300)]
perf tools: Stop using 'self' in map.[ch]
As suggested by tglx, 'self' should be replaced by something that is
more useful.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-vse2c54m0yahx6p79tmoel03@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Fri, 25 Jan 2013 00:59:59 +0000 (21:59 -0300)]
perf tools: Stop using 'self' in strlist
As suggested by tglx, 'self' should be replaced by something that is
more useful.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-933537sxtcz47qs0e0ledmrp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Thu, 24 Jan 2013 20:46:43 +0000 (21:46 +0100)]
tools lib traceevent: Handle dynamic array's element size properly
Fixing the dynamic array format field parsing.
Currently the event_read_fields function could segfault while parsing
dynamic array other than string type. The reason is the event->pevent
does not need to be set and gets dereferenced unconditionaly.
Also adding proper initialization of field->elementsize based on the
parsed dynamic type.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1359060403-32422-1-git-send-email-jolsa@redhat.com
[ committer note: Made a char pointer parameter const, as requested by Steven ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar [Fri, 25 Jan 2013 10:33:41 +0000 (11:33 +0100)]
Merge tag 'perf-core-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
. Allow skipping problematic entries in 'perf test'.
. Fix some namespace problems in the event parsing routines.
. Add 'perf test' entry to make sure the python binding doesn't have
linking problems.
. Adjust 'perf test' attr tests verbosity levels.
. Make tools/perf build with GNU make v3.80, fix from Al Cooper.
. Do missing feature fallbacks in just one place, removing duplicated
code in multiple tools.
. Fix some memory leaks, from David Ahern.
. Fix segfault when drawing out-of-bounds jumps, from Frederik Deweerdt.
. Allow of casting an array of char to string in 'perf probe', from
Hyeoncheol Lee.
. Add support for wildcard in tracepoint system name, from Jiri Olsa.
. Update FSF postal address to be URL's, from Jon Stanley.
. Add anonymous huge page recognition, from Joshua Zhu.
. Remove some needless feature test checks, from Namhyung Kim.
. Multiple improvements to the sort routines, from Namhyung Kim.
. Fix warning on '>=' operator in libtraceevent, from Namhyung Kim.
. Use ARRAY_SIZE instead of reinventing it in 'perf script' and 'perf kmem',
from Sasha Levin.
. Remove some redundant checks, from Sasha Levin.
. Test correct variable after allocation in libtraceevent, fix from Sasha Levin.
. Mark branch_info maps as referenced, fix from Stephane Eranian.
. Fix PMU format parsing test failure, from Sukadev Bhattiprolu.
. Fix possible (unlikely) buffer overflow, from Thomas Jarosch.
. Multiple 'perf script' fixes, from Tom Zanussi.
. Add missing field in PERF_RECORD_SAMPLE documentation, from Vince Weaver.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Josh Triplett [Mon, 19 Nov 2012 05:27:45 +0000 (21:27 -0800)]
tracing: Mark tracing_dentry_percpu() static
Nothing outside of kernel/trace/trace.c references tracing_dentry_percpu().
Link: http://lkml.kernel.org/r/1353302917-13995-7-git-send-email-josh@joshtriplett.org
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Arnaldo Carvalho de Melo [Thu, 24 Jan 2013 19:22:55 +0000 (16:22 -0300)]
perf test: Allow skipping tests
Sometimes a test is problematic for some reason and one wants to skip it,
for instance:
[root@sandy ~]# perf test
1: vmlinux symtab matches kallsyms : Ok
2: detect open syscall event : Ok
3: detect open syscall event on all cpus : Ok
4: read samples using the mmap interface : Ok
5: parse events tests : Warning: bad op token {
Warning: bad op token {
Warning: bad op token {
Warning: bad op token {
Warning: bad op token {
Warning: function is_writable_pte not defined
Segmentation fault (core dumped)
So now we can use -s/--skip while the problematic tests are being fixed,
allowing us to test all the other entries:
[root@sandy ~]# perf test -s 5
1: vmlinux symtab matches kallsyms : Ok
2: detect open syscall event : Ok
3: detect open syscall event on all cpus : Ok
4: read samples using the mmap interface : Ok
5: parse events tests : Skip (user override)
6: x86 rdpmc test : Ok
7: Validate PERF_RECORD_* events & perf_sample fields : Ok
8: Test perf pmu format parsing : Ok
9: Test dso data interface : Ok
10: roundtrip evsel->name check : Ok
11: Check parsing of sched tracepoints fields : Ok
12: Generate and check syscalls:sys_enter_open event fields: Ok
13: struct perf_event_attr setup : Ok
14: Test matching and linking mutliple hists : Ok
15: Try 'use perf' in python, checking link problems : Ok
[root@sandy ~]#
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-klzd8p57jzdryafqkmlppcb1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 24 Jan 2013 19:17:27 +0000 (16:17 -0300)]
perf tools: Allow passing a list to intlist__new
Just like strlist allows passing a list of entries to parse.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-em50vqvvmlnc6k9tw4xtixus@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 24 Jan 2013 19:10:42 +0000 (16:10 -0300)]
perf tools: Allow passing NULL to intlist__find
So that we can work with optional parameters that may not set up an
intlist.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-e9tmvgdzehqrza11zs0nbg7g@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tom Zanussi [Fri, 18 Jan 2013 19:51:28 +0000 (13:51 -0600)]
perf script: Remove workqueue-stats script
The tracepoints used by the workqueue-stats script no longer exist so
trying to run the script results in:
# perf script record workqueue-stats
invalid or unsupported event: 'workqueue:workqueue_creation'
Run 'perf list' for a list of valid events
So remove the script until it can be reworked using the new workqueue
tracepoints.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lkml.kernel.org/r/e7a7637d5df9df86887c3bff7683574665ec5360.1358527965.git.tom.zanussi@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tom Zanussi [Fri, 18 Jan 2013 19:51:27 +0000 (13:51 -0600)]
perf script: hook up perf_scripting_context->pevent
Running the check-perf-trace scripts causes segfaults in both the Perl
and Python cases:
# perf script record check-perf-trace
# perf script -s libexec/perf-core/scripts/python/check-perf-trace.py
trace_begin
Segmentation fault (core dumped)
The reason is that the 'pevent' field was added to
perf_scripting_context but it wasn't hooked up with an actual pevent in
either case, so when one of the 'common' fields is accessed (in
util/trace-event-parse.c:get_common_fields()), pevent->events tries to
dereference a NULL pointer.
This sets the pevent field when the scripting context is set up.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lkml.kernel.org/r/d2b1b8166a6ca0a36e1f5255b88a8289058ba236.1358527965.git.tom.zanussi@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tom Zanussi [Fri, 18 Jan 2013 19:51:26 +0000 (13:51 -0600)]
perf script: Don't display trace info when invoking scripts
Only display the trace info if using the default event display. When
invoking scripts we assume they have complete control of what's
displayed so we shouldn't unconditionally display the trace info, and
when generating scripts we don't expect to see trace info obscuring the
output message.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lkml.kernel.org/r/12ec084ef2870178915c907d16cd1dfa19fbb39e.1358527965.git.tom.zanussi@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tom Zanussi [Fri, 18 Jan 2013 19:51:25 +0000 (13:51 -0600)]
perf tools: Reinstate 'signed' field flag for tracepoints
For some reason the libtraceevent tracepoint-parsing code is missing
the FIELD_IS_SIGNED flag-setting code, which causes problems for the
Perl trace event binding at least, since it ends up unable to
recognize negative numbers.
Things like checking for negative return values therefore fail, causing
scripts like rwtop to instead interpret the negative return value as a
large positive value, which in turn get added to e.g. read totals with
insanely invalid results.
So set the FIELD_IS_SIGNED flag for tracepoint events that specify
"signed:1".
Before:
# perf script record rw-by-pid
# perf script report rw-by-pid
read counts by pid:
pid comm # reads bytes_requested bytes_read
------ -------------------- ----------- ---------- ----------
753 Xorg 88 512000 7.
74763251095801e+20
1619 firefox 42 462 2.
58254417031934e+20
1232 gnome-shell 11 176 1.
10680464442257e+20
1471 gnome-terminal 3 16366
18446744073709551615
1408 libsocialweb-co 2 32
18446744073709551613
After:
# perf script report rw-by-pid
read counts by pid:
pid comm # reads bytes_requested bytes_read
------ -------------------- ----------- ---------- ----------
753 Xorg 88 512000 2764
1619 firefox 42 462 126
1232 gnome-shell 11 176 40
1471 gnome-terminal 3 16366 10
1408 libsocialweb-co 2 32 8
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lkml.kernel.org/r/1471b5968821a455cf5168bb4567964e74ecf530.1358527965.git.tom.zanussi@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 24 Jan 2013 18:18:54 +0000 (15:18 -0300)]
perf tools: Remove some needless die() calls from the main routine
Some would just call exit() anyway right after calling die() and the
main routine doesn't have to call it, just return the exit value.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-nzq0sdur6oq6lgkt2ipf4o8s@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Fri, 18 Jan 2013 20:05:09 +0000 (17:05 -0300)]
perf pmu: Privatize perf_pmu_{format,alias} structs
They are only used in pmu.c, so no need to make them public in pmu.h.
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-3gu6vhyro22ywqcldy0gtegv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Fri, 18 Jan 2013 20:03:43 +0000 (17:03 -0300)]
perf tests: Use ARRAY_SIZE() were applicable
We were using a homebrew equivalent, use the macro that is used
everywhere for this function.
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bp3wokafua1ecairau77jcy0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Fri, 18 Jan 2013 19:56:57 +0000 (16:56 -0300)]
perf tools: Fix usage of __ in event parsing struct names
In tools/perf we use a convention where __ separates the struct name
from the function name for functions that operate on a struct instance.
Fix this usage by removing it from the struct names and fix also the
associated functions.
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-kdcoh7uitivx68otqcz12aaz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Fri, 18 Jan 2013 19:55:52 +0000 (16:55 -0300)]
perf ui browsers: Fix usage of __ in struct names
In tools/perf we use a convention where __ separates the struct name
from the function name for functions that operate on a struct instance.
Fix this usage by removing it from the struct names and fix also the
associated functions.
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-rfj7acng5tukftb8hy1rrw08@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Fri, 18 Jan 2013 19:54:00 +0000 (16:54 -0300)]
perf pmu: Fix usage of __ in struct names
In tools/perf we use a convention where __ separates the struct name
from the function name for functions that operate on a struct instance.
Fix this usage by removing it from the struct names and fix also the
associated functions.
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-1tepcpohpvfg589pizx7tlkq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Fri, 18 Jan 2013 19:29:49 +0000 (16:29 -0300)]
perf tools: Fix usage of __ in parse_events_term struct
In tools/perf we use a convention where __ separates the struct name
from the function name for functions that operate on a struct instance.
Fix this usage by removing it from the struct parse_events_term and fix
also its associated functions.
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-h6vkql4jr7dv0096f1s6hldm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Tue, 22 Jan 2013 09:09:41 +0000 (18:09 +0900)]
perf tools: Move ltrim() to util/string.c
As we have ltrim() implementation in builtin-script.c move it to the
more generic location of util/string.c so that it can be used from other
places.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1358845787-1350-14-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sukadev Bhattiprolu [Thu, 17 Jan 2013 17:11:30 +0000 (09:11 -0800)]
perf tools: Fix PMU format parsing test failure
On POWER, the 'perf format parsing' test always fails.
Looks like it is because memset() is being passed number of longs rather
than number of bytes. It is interesting that the test always passes on
my x86 box.
With this patch, the test passes on POWER and continues to pass on x86.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Anton Blanchard <anton@au1.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@ozlabs.org
Link: http://lkml.kernel.org/r/20130117172814.GA18882@us.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Wed, 16 Jan 2013 11:59:53 +0000 (20:59 +0900)]
perf tools: Do not include PERF-VERSION-FILE to Makefile
When make runs it tries to update the Makefile rules by reading all of
included Makefiles. During the perf build it checks PERF-VERSION-FILE
to get the current version number. But it triggers Makefile update so
that make runs again with the update Makefile and, in turn, users will
see duplicate CHK message on the second path.
Running make with -d option for debugging tells me this:
GNU Make 3.82
Built for x86_64-redhat-linux-gnu
Copyright (C) 2010 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Reading makefiles...
Reading makefile `Makefile'...
Reading makefile `../scripts/Makefile.include' (search path) (no ~ expansion)...
Reading makefile `config/utilities.mak' (search path) (no ~ expansion)...
Reading makefile `PERF-VERSION-FILE' (search path) (don't care) (no ~ expansion)...
Reading makefile `config/feature-tests.mak' (search path) (don't care) (no ~ expansion)...
CHK -fstack-protector-all
CHK -Wstack-protector
CHK -Wvolatile-register-var
...
Updating makefiles....
Considering target file `PERF-VERSION-FILE'.
Must remake target `PERF-VERSION-FILE'.
Invoking recipe from Makefile:52 to update target `PERF-VERSION-FILE'.
Putting child 0x14037a0 (PERF-VERSION-FILE) PID 31925 on the chain.
Live child 0x14037a0 (PERF-VERSION-FILE) PID 31925
PERF_VERSION = 3.8.rc3.gf751db6
Reaping winning child 0x14037a0 PID 31925
Removing child 0x14037a0 PID 31925 from chain.
Successfully remade target file `PERF-VERSION-FILE'.
...
Re-executing[1]: make -d <------------ here
GNU Make 3.82
Built for x86_64-redhat-linux-gnu
Copyright (C) 2010 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Reading makefiles...
Reading makefile `Makefile'...
Reading makefile `../scripts/Makefile.include' (search path) (no ~ expansion)...
Reading makefile `config/utilities.mak' (search path) (no ~ expansion)...
Reading makefile `PERF-VERSION-FILE' (search path) (don't care) (no ~ expansion)...
Reading makefile `config/feature-tests.mak' (search path) (don't care) (no ~ expansion)...
CHK -fstack-protector-all
CHK -Wstack-protector
CHK -Wvolatile-register-var
...
Actually PERF-VERSION-FILE is used only for perf.c to #define
PERF_VERSION macro. So make it like a C header file and include it
during compiling the perf.c file will remove the need of being
included into Makefile. Hench no need to update the Makefile and no
CHK lines anymore.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1358337594-10916-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Wed, 16 Jan 2013 11:59:54 +0000 (20:59 +0900)]
perf tools: Get rid of unused include of config.mak
These lines are came from GIT Makefile and never used for perf.
I found it from make -d output during working on previous patch.
Updating makefiles....
Considering target file `arch/x86/Makefile'.
No need to remake target `arch/x86/Makefile'.
Considering target file `config.mak'.
File `config.mak' does not exist.
Must remake target `config.mak'.
Failed to remake target file `config.mak'.
Considering target file `config.mak.autogen'.
File `config.mak.autogen' does not exist.
Must remake target `config.mak.autogen'.
Failed to remake target file `config.mak.autogen'.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1358337594-10916-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Tue, 15 Jan 2013 08:02:19 +0000 (17:02 +0900)]
tools lib traceevent: Fix warning on '>=' operator
Although the '>=' (and '<=') operator is handled properly in
libtraceevent, it emitted following spurious warnings on perf test:
$ perf test
5: parse events tests :
...
Warning: unknown op '>='
Warning: unknown op '>='
Warning: unknown op '>='
Warning: unknown op '>='
Warning: unknown op '>='
Warning: unknown op '>='
...
Add the operator to the checks.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1358236939-17393-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 15 Jan 2013 13:39:51 +0000 (14:39 +0100)]
perf tools: Remove unused 'unset' parameter from parse_events
The 'unset' parameter is option callback leftover with no use, removing.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/1358257194-8204-2-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stephane Eranian [Mon, 14 Jan 2013 14:02:45 +0000 (15:02 +0100)]
perf tools: Mark branch_info maps as referenced
As noticed by Jiri, the hist_entry->branch_info.to/from maps need to be
marked as referenced to avoid problems later on. So we do this when the
hist_entry is allocated.
Signed-off-by: Stephane Eranian <eranian@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20130114140245.GA4692@quad
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Frederik Deweerdt [Mon, 14 Jan 2013 19:47:17 +0000 (14:47 -0500)]
perf annotate browser: Fix segfault when drawing out-of-bounds jumps
Factorize jump sanity checks from mark_jump_targets() and
draw_current_jump() in an is_valid_jump() function.
This fixes a segfault when moving the cursor over an invalid jump.
Signed-off-by: Frederik Deweerdt <frederik.deweerdt@xprog.eu>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20130114194716.GA4973@ks398093.ip-192-95-24.net
[ committer note: Make it a disasm_line method ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Mon, 14 Jan 2013 17:48:01 +0000 (10:48 -0700)]
perf tools: Move get_term_dimensions from top to util.c
It is used by util/help.c so it should be a lib function and included in
libperf.a. Code move only.
Signed-off-by: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1358185681-90926-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Mon, 14 Jan 2013 17:47:30 +0000 (10:47 -0700)]
perf symbols: Mark vmlinux filename as allocated
Needs to be marked allocated so memory can be freed when dso is deleted.
Signed-off-by: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1358185650-90848-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Mon, 14 Jan 2013 17:46:47 +0000 (10:46 -0700)]
perf symbols: Move name malloc to when needed in dso__load
Memory is currently leaked on some paths.
Signed-off-by: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1358185607-90799-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Thu, 27 Dec 2012 09:11:47 +0000 (18:11 +0900)]
perf report: Update documentation for sort keys
Add description of sort keys to the perf-report document and also add
missing cpu and srcline keys to the command line help string.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1356599507-14226-11-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Thu, 27 Dec 2012 09:11:46 +0000 (18:11 +0900)]
perf sort: Separate out branch stack specific sort keys
Current perf report gets segmentation fault when a branch stack specific
sort key is provided by --sort option to a perf.data file which contains
no branch infomation. It's because those sort keys reference branch
info of a hist entry unconditionally. Maybe we can change it checks
whether such branch info is valid or not. But if the branch stacks are
not recorded, it'd be nop. Thus it'd be better to make those keys are
unselectable.
This patch separates those keys to a different dimension array, so that
if user passes such a key to a file which has no branch stack will get
following message rather than a segfault.
Error: Invalid --sort key: `symbol_from'
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reported-by: Stefan Beller <stefanbeller@googlemail.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1356599507-14226-10-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Thu, 27 Dec 2012 09:11:45 +0000 (18:11 +0900)]
perf sort: Clean up sort__first_dimension setting
It doesn't need to compare to every sort key names since the index
already has the required information.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1356599507-14226-9-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Thu, 27 Dec 2012 09:11:42 +0000 (18:11 +0900)]
perf sort: Calculate parent column width too
When hists__calc_col_len() called, most of column length are refreshed
but it missed parent column. So if the parent sort key was used along
with other keys rests will be misalinged since parent has no proper
column width.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1356599507-14226-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Thu, 27 Dec 2012 09:11:41 +0000 (18:11 +0900)]
perf sort: Align cpu column to right
Since cpu number is a natural number, it'd be more appropriate
aligning it to right.
Before:
# Overhead CPU Command: Pid Shared Object
# ........ ... ................. .....................
#
8.91% 8 gnome-shell: 1497 perf-1497.map
8.90% 7 gnome-shell: 1497 perf-1497.map
8.86% 9 gnome-shell: 1497 perf-1497.map
8.83% 6 gnome-shell: 1497 perf-1497.map
8.81% 10 gnome-shell: 1497 perf-1497.map
7.44% 5 gnome-shell: 1497 perf-1497.map
6.20% 3 gnome-shell: 1497 perf-1497.map
5.10% 0 gnome-shell: 1497 perf-1497.map
After:
# Overhead CPU Command: Pid Shared Object
# ........ ... ................. .....................
#
8.91% 8 gnome-shell: 1497 perf-1497.map
8.90% 7 gnome-shell: 1497 perf-1497.map
8.86% 9 gnome-shell: 1497 perf-1497.map
8.83% 6 gnome-shell: 1497 perf-1497.map
8.81% 10 gnome-shell: 1497 perf-1497.map
7.44% 5 gnome-shell: 1497 perf-1497.map
6.20% 3 gnome-shell: 1497 perf-1497.map
5.10% 0 gnome-shell: 1497 perf-1497.map
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1356599507-14226-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Thu, 27 Dec 2012 09:11:40 +0000 (18:11 +0900)]
perf sort: Fix --sort pid output
The "pid" sort key prints "Command: Pid" output but it's misaligned.
It's because of the offset of 6 was added to the column length during
the calculation in order to reserve an space for Pid part but it isn't
honored when printed. The output before this patch was like this:
# Overhead Command: Pid Shared Object
# ........ ............. .................
#
99.70% noploop:17814 noploop
0.29% noploop:17814 [kernel.kallsyms]
0.01% noploop:17814 ld-2.15.so
Fix it by subtracting 6 for printing comm part.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1356599507-14226-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / log