GitHub/exynos8895/android_kernel_samsung_universal8895.git
15 years ago[CIFS] Allow raw ntlmssp code to be enabled with sec=ntlmssp
Steve French [Wed, 6 May 2009 04:16:04 +0000 (04:16 +0000)]
[CIFS] Allow raw ntlmssp code to be enabled with sec=ntlmssp

On mount, "sec=ntlmssp" can now be specified to allow
"rawntlmssp" security to be enabled during
CIFS session establishment/authentication (ntlmssp used to
require specifying krb5 which was counterintuitive).

Signed-off-by: Steve French <sfrench@us.ibm.com>
15 years ago[CIFS] Fix SMB uid in NTLMSSP authenticate request
Steve French [Wed, 6 May 2009 00:48:30 +0000 (00:48 +0000)]
[CIFS] Fix SMB uid in NTLMSSP authenticate request

We were not setting the SMB uid in NTLMSSP authenticate
request which could lead to INVALID_PARAMETER error
on 2nd session setup.

Signed-off-by: Steve French <sfrench@us.ibm.com>
15 years ago[CIFS] NTLMSSP reenabled after move from connect.c to sess.c
Steve French [Mon, 4 May 2009 08:37:12 +0000 (08:37 +0000)]
[CIFS] NTLMSSP reenabled after move from connect.c to sess.c

The NTLMSSP code was removed from fs/cifs/connect.c and merged
(75% smaller, cleaner) into fs/cifs/sess.c

As with the old code it requires that cifs be built with
CONFIG_CIFS_EXPERIMENTAL, the /proc/fs/cifs/Experimental flag
must be set to 2, and mount must turn on extended security
(e.g. with sec=krb5).

Although NTLMSSP encapsulated in SPNEGO is not enabled yet,
"raw" ntlmssp is common and useful in some cases since it
offers more complete security negotiation, and is the
default way of negotiating security for many Windows systems.
SPNEGO encapsulated NTLMSSP will be able to reuse the same
code.

Signed-off-by: Steve French <sfrench@us.ibm.com>
15 years ago[CIFS] Remove sparse warning
Steve French [Sat, 2 May 2009 05:40:39 +0000 (05:40 +0000)]
[CIFS] Remove sparse warning

Signed-off-by: Steve French <sfrench@us.ibm.com>
15 years ago[CIFS] remove checkpatch warning
Steve French [Sat, 2 May 2009 05:32:20 +0000 (05:32 +0000)]
[CIFS] remove checkpatch warning

Signed-off-by: Steve French <sfrench@us.ibm.com>
15 years ago[CIFS] Fix final user of old string conversion code
Steve French [Sat, 2 May 2009 05:25:46 +0000 (05:25 +0000)]
[CIFS] Fix final user of old string conversion code

Signed-off-by: Steve French <sfrench@us.ibm.com>
15 years ago[CIFS] remove cifs_strfromUCS_le
Jeff Layton [Sat, 2 May 2009 04:59:34 +0000 (04:59 +0000)]
[CIFS] remove cifs_strfromUCS_le

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
15 years ago[CIFS] NTLMSSP support moving into new file, old dead code removed
Steve French [Sat, 2 May 2009 04:55:39 +0000 (04:55 +0000)]
[CIFS] NTLMSSP support moving into new file, old dead code removed

Remove dead NTLMSSP support from connect.c prior to addition of
the new code to replace it.

Signed-off-by: Steve French <sfrench@us.ibm.com>
15 years ago[CIFS] Fix endian conversion of vcnum field
Steve French [Fri, 1 May 2009 16:21:04 +0000 (16:21 +0000)]
[CIFS] Fix endian conversion of vcnum field

When multiply mounting from the same client to the same server, with
different userids, we create a vcnum which should be unique if
possible (this is not the same as the smb uid, which is the handle
to the security context).  We were not endian converting additional
(beyond the first which is zero) vcnum properly.

CC: Stable <stable@kernel.org>
Acked-by: Shirish Pargaonkar <shirishp@us.ibm.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
15 years ago[CIFS] Remove trailing whitespace
Steve French [Fri, 1 May 2009 16:20:35 +0000 (16:20 +0000)]
[CIFS] Remove trailing whitespace

Signed-off-by: Steve French <sfrench@us.ibm.com>
15 years ago[CIFS] Remove sparse endian warnings
Steve French [Fri, 1 May 2009 05:27:32 +0000 (05:27 +0000)]
[CIFS] Remove sparse endian warnings

Removes two sparse CHECK_ENDIAN warnings from Jeffs earlier patch,
and removes the dead readlink code (after noting where in
findfirst we will need to add something like that in the future
to handle the newly discovered unexpected error on FindFirst of NTFS symlinks.

Signed-off-by: Steve French <sfrench@us.ibm.com>
15 years ago[CIFS] Add remaining ntlmssp flags and standardize field names
Steve French [Fri, 1 May 2009 04:37:43 +0000 (04:37 +0000)]
[CIFS] Add remaining ntlmssp flags and standardize field names

Signed-off-by: Steve French <sfrench@us.ibm.com>
15 years ago[CIFS] Fix build warning
Steve French [Fri, 1 May 2009 03:50:42 +0000 (03:50 +0000)]
[CIFS] Fix build warning

Signed-off-by: Steve French <sfrench@us.ibm.com>
15 years agocifs: fix length handling in cifs_get_name_from_search_buf
Jeff Layton [Fri, 1 May 2009 00:45:45 +0000 (20:45 -0400)]
cifs: fix length handling in cifs_get_name_from_search_buf

The earlier patch to move this code to use the new unicode helpers
assumed that the filename strings would be null terminated. That's not
always the case.

Instead of passing "max_len" to the string converter, pass "min(len,
max_len)", which makes it do the right thing while still keeping the
parser confined to the response. Also fix up the prototypes of this
function and the callers so that max_len is unsigned (like len is).

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
15 years ago[CIFS] Remove unneeded QuerySymlink call and fix mapping for unmapped status
Steve French [Thu, 30 Apr 2009 21:31:15 +0000 (21:31 +0000)]
[CIFS] Remove unneeded QuerySymlink call and fix mapping for unmapped status

Signed-off-by: Steve French <sfrench@us.ibm.com>
15 years ago[CIFS] rename cifs_strndup to cifs_strndup_from_ucs
Steve French [Thu, 30 Apr 2009 17:45:10 +0000 (17:45 +0000)]
[CIFS] rename cifs_strndup to cifs_strndup_from_ucs

In most cases, cifs_strndup is converting from Unicode (UCS2 / UTF-32) to
the configured local code page for the Linux mount (usually UTF8), so
Jeff suggested that to make it more clear that cifs_strndup is doing
a conversion not just memory allocation and copy, rename the function
to including "from_ucs" (ie Unicode)

Signed-off-by: Steve French <sfrench@us.ibm.com>
15 years agoAdded loop check when mounting DFS tree.
Igor Mammedov [Tue, 21 Apr 2009 15:31:05 +0000 (19:31 +0400)]
Added loop check when mounting DFS tree.

Added loop check when mounting DFS tree. mount will fail with
ELOOP if referral walks exceed MAX_NESTED_LINK count.

Signed-off-by: Igor Mammedov <niallain@gmail.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
15 years agoEnable dfs submounts to handle remote referrals.
Igor Mammedov [Tue, 17 Mar 2009 16:00:30 +0000 (19:00 +0300)]
Enable dfs submounts to handle remote referrals.

Having remote dfs root support in cifs_mount, we can
afford to pass into it UNC that is remote.

Signed-off-by: Igor Mammedov <niallain@gmail.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
15 years ago[CIFS] Remove older session setup implementation
Steve French [Thu, 30 Apr 2009 16:13:32 +0000 (16:13 +0000)]
[CIFS] Remove older session setup implementation

Two years ago, when the session setup code in cifs was rewritten and moved
to fs/cifs/sess.c, we were asked to keep the old code for a release or so
(which could be reenabled at runtime) since it was such a large change and
because the asn (SPNEGO) and NTLMSSP code was not rewritten and needed to
be. This was useful to avoid regressions, but is long overdue to be removed.
Now that the Kerberos (asn/spnego) code is working in fs/cifs/sess.c,
and the NTLMSSP code moved (NTLMSSP blob setup be rewritten with the
next patch in this series) quite a bit of dead code from fs/cifs/connect.c
now can be removed.

This old code should have been removed last year, but the earlier krb5
patches did not move/remove the NTLMSSP code which we had asked to
be done first.  Since no one else volunteered, I am doing it now.

It is extremely important that we continue to examine the documentation
for this area, to make sure our code continues to be uptodate with
changes since Windows 2003.

Signed-off-by: Steve French <sfrench@us.ibm.com>
15 years agocifs: change cifs_get_name_from_search_buf to use new unicode helper
Jeff Layton [Thu, 30 Apr 2009 11:18:00 +0000 (07:18 -0400)]
cifs: change cifs_get_name_from_search_buf to use new unicode helper

...and remove cifs_convertUCSpath. There are no more callers. Also add a
#define for the buffer used in the readdir path so that we don't have so
many magic numbers floating around.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
15 years agocifs: change CIFSSMBUnixQuerySymLink to use new helpers
Jeff Layton [Thu, 30 Apr 2009 11:17:56 +0000 (07:17 -0400)]
cifs: change CIFSSMBUnixQuerySymLink to use new helpers

Change CIFSSMBUnixQuerySymLink to use the new unicode helper functions.
Also change the calling conventions so that the allocation of the target
name buffer is done in CIFSSMBUnixQuerySymLink rather than by the caller.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
15 years agocifs: fix session setup unicode string saving to use new unicode helpers
Jeff Layton [Thu, 30 Apr 2009 11:16:21 +0000 (07:16 -0400)]
cifs: fix session setup unicode string saving to use new unicode helpers

...and change decode_unicode_ssetup to be a void function. It never
returns an actual error anyway.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
15 years agocifs: convert CIFSTCon to use new unicode helper functions
Jeff Layton [Thu, 30 Apr 2009 11:16:21 +0000 (07:16 -0400)]
cifs: convert CIFSTCon to use new unicode helper functions

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
15 years agocifs: rename cifs_strlcpy_to_host and make it use new functions
Jeff Layton [Thu, 30 Apr 2009 11:16:14 +0000 (07:16 -0400)]
cifs: rename cifs_strlcpy_to_host and make it use new functions

Rename cifs_strlcpy_to_host to cifs_strndup since that better describes
what this function really does. Then, convert it to use the new string
conversion and measurement functions that work in units of bytes rather
than wide chars.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
15 years agocifs: add new function to get unicode string length in bytes
Jeff Layton [Thu, 30 Apr 2009 10:46:32 +0000 (06:46 -0400)]
cifs: add new function to get unicode string length in bytes

Working in units of words means we do a lot of unnecessary conversion back
and forth. Standardize on bytes instead since that's more useful for
allocating buffers and such. Also, remove hostlen_fromUCS since the new
function has a similar purpose.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
15 years agocifs: add replacement for cifs_strtoUCS_le called cifs_from_ucs2
Jeff Layton [Thu, 30 Apr 2009 10:46:15 +0000 (06:46 -0400)]
cifs: add replacement for cifs_strtoUCS_le called cifs_from_ucs2

Add a replacement function for cifs_strtoUCS_le. cifs_from_ucs2
takes args for the source and destination length so that we can ensure
that the function is confined within the intended buffers.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
15 years agocifs: move #defines for mapchars into cifs_unicode.h
Jeff Layton [Thu, 30 Apr 2009 10:45:08 +0000 (06:45 -0400)]
cifs: move #defines for mapchars into cifs_unicode.h

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
15 years agoMerge branch 'master' of /pub/scm/linux/kernel/git/torvalds/linux-2.6
Steve French [Thu, 30 Apr 2009 15:36:52 +0000 (15:36 +0000)]
Merge branch 'master' of /linux/kernel/git/torvalds/linux-2.6

15 years agonls: add a nls_nullsize inline
Jeff Layton [Thu, 30 Apr 2009 10:45:08 +0000 (06:45 -0400)]
nls: add a nls_nullsize inline

It's possible for character sets to require a multi-byte null
string terminator. Add a helper function that determines the size
of the null terminator at runtime.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
15 years agoLinux 2.6.30-rc4
Linus Torvalds [Thu, 30 Apr 2009 04:48:16 +0000 (21:48 -0700)]
Linux 2.6.30-rc4

15 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs...
Linus Torvalds [Thu, 30 Apr 2009 04:25:53 +0000 (21:25 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/ecryptfs/ecryptfs-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6:
  eCryptfs: Fix min function comparison warning
  ecryptfs: fix printk format warning

15 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab...
Linus Torvalds [Thu, 30 Apr 2009 04:25:39 +0000 (21:25 -0700)]
Merge branch 'for_linus' of git://git./linux/kernel/git/mchehab/linux-2.6

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6:
  V4L/DVB (11652): au0828: fix kernel oops regression on USB disconnect.
  V4L/DVB (11626): cx23885: Two fixes for DViCO FusionHDTV DVB-T Dual Express
  V4L/DVB (11612): mx3_camera: Fix compilation with CONFIG_PM
  V4L/DVB (11570): patch: s2255drv: fix race condition on set mode
  V4L/DVB (11568): cx18: Fix the handling of i2c bus registration error
  V4L/DVB (11561a): move media after i2c
  V4L/DVB (11516): drivers/media/video/saa5246a.c: fix use-after-free
  V4L/DVB (11515): drivers/media/video/saa5249.c: fix use-after-free and leak
  V4L/DVB (11494a): cx231xx Kconfig fixes
  V4L/DVB (11494): cx18: Send correct input routing value to external audio multiplexers

15 years agoV4L/DVB (11652): au0828: fix kernel oops regression on USB disconnect.
Devin Heitmueller [Tue, 28 Apr 2009 16:14:07 +0000 (13:14 -0300)]
V4L/DVB (11652): au0828: fix kernel oops regression on USB disconnect.

A regression was introduced in hg changeset 33810c734a0d, which resulted in
a kernel panic whenever the device was disconnected from USB.  The call to
4l2_device_register() was overwriting the pointer for usb_set_intfdata(), so
when au0828_usb_disconnect() was called, the usb_get_intfdata() returned a
pointer to the v4l2_device instead of the au0828_dev structure.

Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (11626): cx23885: Two fixes for DViCO FusionHDTV DVB-T Dual Express
Christopher Pascoe [Mon, 27 Apr 2009 14:27:04 +0000 (11:27 -0300)]
V4L/DVB (11626): cx23885: Two fixes for DViCO FusionHDTV DVB-T Dual Express

Two fixes for DViCO FusionHDTV DVB-T Dual Express:

 * Reset correct tuner when reinitializing xc3028.
 * Disable the I2C gate control to avoid locking up the I2C bus.

Tested-by: John Knops <jknops@australiaonline.net.au>
Reviewed-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Christopher Pascoe <linuxdvb@itee.uq.edu.au>
Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (11612): mx3_camera: Fix compilation with CONFIG_PM
Sascha Hauer [Fri, 24 Apr 2009 15:58:24 +0000 (12:58 -0300)]
V4L/DVB (11612): mx3_camera: Fix compilation with CONFIG_PM

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (11570): patch: s2255drv: fix race condition on set mode
Dean Anderson [Mon, 20 Apr 2009 22:07:44 +0000 (19:07 -0300)]
V4L/DVB (11570): patch: s2255drv: fix race condition on set mode

set_modeready flag must be set before command sent to USB in
s2255_write_config.

Signed-off-by: Dean Anderson <dean@sensoray.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (11568): cx18: Fix the handling of i2c bus registration error
Jean Delvare [Fri, 17 Apr 2009 13:56:51 +0000 (10:56 -0300)]
V4L/DVB (11568): cx18: Fix the handling of i2c bus registration error

* Return actual error values as returned by the i2c subsystem, rather
  than 0 or 1.
* If the registration of the second bus fails, unregister the first one
  before exiting, otherwise we are leaking resources.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (11561a): move media after i2c
Guennadi Liakhovetski [Tue, 21 Apr 2009 07:22:38 +0000 (04:22 -0300)]
V4L/DVB (11561a): move media after i2c

Currently drivers/media drivers are linked very early - directly after
base, block, misc, and mfd and before ata, scsi, ide, input, firewire,
usb, and i2c. This breaks static build of video4linux drivers, that use
generic CPU i2c adapter drivers and the v4l2-subdev subsystem, because
during video4linux probing the v4l2-subdev core requires a struct
i2c_adapter context, which cannot be satisfied before the i2c subsystem is
initialised. Moving drivers/media after drivers/i2c fixes this problem.

The best way to trigger action is by submitting a patch:-) So, let's see
what comes out of it - on the one hand I don't see any reason why media
has to be linked this early, and nobody was able to give me one yesterday
as this problem has been discussed on linux-media, OTOH, maybe indeed it
would be better to move i2c the whole way up above media, but that'd be
much bigger of a change, I think.
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (11516): drivers/media/video/saa5246a.c: fix use-after-free
Dan Carpenter [Tue, 14 Apr 2009 22:51:30 +0000 (19:51 -0300)]
V4L/DVB (11516): drivers/media/video/saa5246a.c: fix use-after-free

I lowered the kfree(t) down a couple lines and removed the superflous
"t->vdev = NULL;"

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (11515): drivers/media/video/saa5249.c: fix use-after-free and leak
Dan Carpenter [Tue, 14 Apr 2009 22:50:33 +0000 (19:50 -0300)]
V4L/DVB (11515): drivers/media/video/saa5249.c: fix use-after-free and leak

I moved the kfree() down a couple lines.  t->vdev is going to be in freed
memory so there is no point setting it to NULL.  I added a kfree(t) on a

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (11494a): cx231xx Kconfig fixes
Mauro Carvalho Chehab [Tue, 14 Apr 2009 16:56:58 +0000 (13:56 -0300)]
V4L/DVB (11494a): cx231xx Kconfig fixes

selecting ALSA module breaks if !SND. Just remove select.

While here, let's fix the whitespacing at the Kconfig.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (11494): cx18: Send correct input routing value to external audio multiplexers
Andy Walls [Tue, 14 Apr 2009 00:43:31 +0000 (21:43 -0300)]
V4L/DVB (11494): cx18: Send correct input routing value to external audio multiplexers

A late v4l2_subdev framework change accidentally sent the audio input
routing value to the external multiplexer, instead of the muxer input routing
value to the external multiplexer.  This change corrects that error.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Wed, 29 Apr 2009 14:55:45 +0000 (07:55 -0700)]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (24 commits)
  e100: do not go D3 in shutdown unless system is powering off
  netfilter: revised locking for x_tables
  Bluetooth: Fix connection establishment with low security requirement
  Bluetooth: Add different pairing timeout for Legacy Pairing
  Bluetooth: Ensure that HCI sysfs add/del is preempt safe
  net: Avoid extra wakeups of threads blocked in wait_for_packet()
  net: Fix typo in net_device_ops description.
  ipv4: Limit size of route cache hash table
  Add reference to CAPI 2.0 standard
  Documentation/isdn/INTERFACE.CAPI
  update Documentation/isdn/00-INDEX
  ixgbe: Fix WoL functionality for 82599 KX4 devices
  veth: prevent oops caused by netdev destructor
  xfrm: wrong hash value for temporary SA
  forcedeth: tx timeout fix
  net: Fix LL_MAX_HEADER for CONFIG_TR_MODULE
  mlx4_en: Handle page allocation failure during receive
  mlx4_en: Fix cleanup flow on cq activation
  vlan: update vlan carrier state for admin up/down
  netfilter: xt_recent: fix stack overread in compat code
  ...

15 years agoe100: do not go D3 in shutdown unless system is powering off
Thadeu Lima de Souza Cascardo [Wed, 29 Apr 2009 05:42:39 +0000 (22:42 -0700)]
e100: do not go D3 in shutdown unless system is powering off

After experimenting with kexec with the last merges after 2.6.29, I've
had some problems when probing e100.  It would not read the eeprom.  After
some bisects, I realized this has been like that since forever (at least
2.6.18).  The problem is that shutdown is doing the same thing that
suspend does and puts the device in D3 state.  I couldn't find a way to
get the device back to a sane state in the probe function.  So, based on
some similar patches from Rafael J. Wysocki for e1000, e1000e, and ixgbe,
I wrote this one for e100.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluet...
David S. Miller [Wed, 29 Apr 2009 05:40:49 +0000 (22:40 -0700)]
Merge branch 'master' of git://git./linux/kernel/git/holtmann/bluetooth-2.6

15 years agonetfilter: revised locking for x_tables
Stephen Hemminger [Wed, 29 Apr 2009 05:36:33 +0000 (22:36 -0700)]
netfilter: revised locking for x_tables

The x_tables are organized with a table structure and a per-cpu copies
of the counters and rules. On older kernels there was a reader/writer
lock per table which was a performance bottleneck. In 2.6.30-rc, this
was converted to use RCU and the counters/rules which solved the performance
problems for do_table but made replacing rules much slower because of
the necessary RCU grace period.

This version uses a per-cpu set of spinlocks and counters to allow to
table processing to proceed without the cache thrashing of a global
reader lock and keeps the same performance for table updates.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoMerge branch 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt...
Linus Torvalds [Wed, 29 Apr 2009 00:21:20 +0000 (17:21 -0700)]
Merge branch 'drm-intel-next' of git://git./linux/kernel/git/anholt/drm-intel

* 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel:
  drm/i915: fix up error path leak in i915_cmdbuffer
  drm/i915: fix unpaired i915 device mutex on entervt failure.
  drm/i915: add support for G41 chipset
  drm/i915: Enable ASLE if present
  drm/i915: Unregister ACPI video driver when exiting
  drm/i915: Register ACPI video even when not modesetting
  drm/i915: fix transition to I915_TILING_NONE
  drm/i915: Don't let an oops get triggered from irq_emit without dma init.
  drm/i915: allow tiled front buffers on 965+

15 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland...
Linus Torvalds [Wed, 29 Apr 2009 00:21:07 +0000 (17:21 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/roland/infiniband

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (21 commits)
  RDMA/nes: Update iw_nes version
  RDMA/nes: Fix error path in nes_accept()
  RDMA/nes: Fix hang issues for large cluster dynamic connections
  RDMA/nes: Increase rexmit timeout interval
  RDMA/nes: Check for sequence number wrap-around
  RDMA/nes: Do not set apbvt entry for loopback
  RDMA/nes: Fix unused variable compile warning when INFINIBAND_NES_DEBUG=n
  RDMA/nes: Fix fw_ver in /sys
  RDMA/nes: Set trace length to 1 inch for SFP_D
  RDMA/nes: Enable repause timer for port 1
  RDMA/nes: Correct CDR loop filter setting for port 1
  RDMA/nes: Modify thermo mitigation to flip SerDes1 ref clk to internal
  RDMA/nes: Fix resource issues in nes_create_cq() and nes_destroy_cq()
  RDMA/nes: Remove root_256()'s unused pbl_count_256 parameter
  mlx4_core: Fix memory leak in mlx4_enable_msi_x()
  IB/mthca: Fix timeout for INIT_HCA and a few other commands
  RDMA/cxgb3: Don't zero QP attrs when moving to IDLE
  RDMA/nes: Fix bugs in nes_reg_phys_mr()
  RDMA/nes: Fix compiler warning at nes_verbs.c:1955
  IPoIB: Disable NAPI while CQ is being drained
  ...

15 years agom68k: arch/m68k/kernel/sun3-head.S needs <linux/init.h>
Geert Uytterhoeven [Tue, 28 Apr 2009 19:20:11 +0000 (21:20 +0200)]
m68k: arch/m68k/kernel/sun3-head.S needs <linux/init.h>

Fix this:

  arch/m68k/kernel/sun3-head.S: Assembler messages:
  arch/m68k/kernel/sun3-head.S:32: Error: Unknown operator -- statement `__head' ignored

Introduced by commit 6f335cab0431d5df4995bcd4fd952d4c746d5a86 ("m68k:
convert to use __HEAD and HEAD_TEXT macros."), which started using
__HEAD without adding the appropriate include.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoMerge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
Linus Torvalds [Tue, 28 Apr 2009 23:06:48 +0000 (16:06 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  bio: fix memcpy corruption in bio_copy_user_iov()
  hd: fix locking
  mg_disk: fix CONFIG_LBD=y warning
  mg_disk: fix locking

15 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6
Linus Torvalds [Tue, 28 Apr 2009 23:06:33 +0000 (16:06 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/lrg/voltage-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6:
  regulator: Fix default constraints for fixed voltage regulators
  regulator/bq24022: fix bug in is_enabled function
  regulator/virtual: fix strings compare predicates
  regulator core: fix double-free in regulator_register() error path
  drivers/regulator: fix when type is different from REGULATOR_VOLTAGE or REGULATOR_CURRENT
  unreachable code in drms_uA_update()
  regulator: fix header file missing kernel-doc

15 years agoMerge branches 'cxgb3', 'ipoib', 'mthca', 'mlx4' and 'nes' into for-linus
Roland Dreier [Tue, 28 Apr 2009 23:01:31 +0000 (16:01 -0700)]
Merge branches 'cxgb3', 'ipoib', 'mthca', 'mlx4' and 'nes' into for-linus

15 years agoMerge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
Linus Torvalds [Tue, 28 Apr 2009 22:55:32 +0000 (15:55 -0700)]
Merge branch 'merge' of git://git./linux/kernel/git/paulus/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  powerpc/ps3: Fix build error on UP
  powerpc/cell: Select PCI for IBM_CELL_BLADE AND CELLEB
  powerpc: ppc32 needs elf_read_implies_exec()
  powerpc/86xx: Add device_type entry to soc for ppc9a
  powerpc/44x: Correct memory size calculation for denali-based boards
  maintainers: Fix PowerPC 4xx git tree
  powerpc: fix for long standing bug noticed by gcc 4.4.0
  Revert "powerpc: Add support for early tlbilx opcode"

15 years agopowerpc: Revert switch to TEXT_TEXT in linker script
Tim Abbott [Tue, 28 Apr 2009 15:47:15 +0000 (11:47 -0400)]
powerpc: Revert switch to TEXT_TEXT in linker script

Commit edada399 broke the build on 64-bit powerpc because it moved the
__ftr_alt_* sections of a file away from the .text section, causing
link failures due to relative conditional branch targets being too far
away from the branch instructions.  This happens on pretty much all
64-bit powerpc configs.

This change reverts commit edada399 while preserving the update from
the *.refok sections to .ref.text that has happened since.

Signed-off-by: Tim Abbott <tabbott@mit.edu>
Requested-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agobio: fix memcpy corruption in bio_copy_user_iov()
FUJITA Tomonori [Tue, 28 Apr 2009 18:24:29 +0000 (20:24 +0200)]
bio: fix memcpy corruption in bio_copy_user_iov()

st driver uses blk_rq_map_user() in order to just build a request out
of page frames. In this case, map_data->offset is a non zero value and
iov[0].iov_base is NULL. We need to increase nr_pages for that.

Cc: stable@kernel.org
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
15 years agohd: fix locking
Tejun Heo [Tue, 28 Apr 2009 03:38:33 +0000 (12:38 +0900)]
hd: fix locking

hd dance around local irq and HD_IRQ enable without achieving much.
It ends up transferring data from irq handler with both local irq and
HD_IRQ disabled.  The only place it actually does something is while
transferring the first block of a request which it does with HD_IRQ
disabled but local irq enabled.

Unfortunately, the dancing is horribly broken from locking POV.  IRQ
and timeout handlers access block queue without grabbing the queue
lock and running the driver in SMP configuration crashes the whole
machine pretty quickly.

Remove meaningless irq enable/disable dancing and add proper locking
in issue, irq and timeout paths.

Signed-off-by: Tejun Heo <tj@kernel.org>
15 years agomg_disk: fix CONFIG_LBD=y warning
Bartlomiej Zolnierkiewicz [Tue, 28 Apr 2009 03:38:33 +0000 (12:38 +0900)]
mg_disk: fix CONFIG_LBD=y warning

drivers/block/mg_disk.c: In function â€˜mg_dump_status’:
drivers/block/mg_disk.c:265: warning: format â€˜%ld’ expects type â€˜long int’, but
argument 2 has type â€˜sector_t’

[ Impact: kill build warning ]

Cc: unsik Kim <donari75@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
15 years agomg_disk: fix locking
Tejun Heo [Tue, 28 Apr 2009 03:38:32 +0000 (12:38 +0900)]
mg_disk: fix locking

IRQ and timeout handlers call functions which expect locked queue lock
without locking it.  Fix it.

While at it, convert 0s used as null pointer constant to NULLs.

[ Impact: fix locking, cleanup ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: unsik Kim <donari75@gmail.com>
15 years agoregulator: Fix default constraints for fixed voltage regulators
Mark Brown [Tue, 28 Apr 2009 10:09:38 +0000 (11:09 +0100)]
regulator: Fix default constraints for fixed voltage regulators

Default voltage constraints were being provided for fixed voltage
regulator where board constraints were not provided but these constraints
used INT_MIN as the default minimum voltage which is not a valid value
since it is less than zero. Use 1uV instead.

Also set the default values we set in the constraints themselves since
otherwise the max_uV constraint we determine will not be stored in the
actual constraint strucutre and will therefore not be used.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
15 years agoregulator/bq24022: fix bug in is_enabled function
Philipp Zabel [Tue, 28 Apr 2009 11:34:14 +0000 (13:34 +0200)]
regulator/bq24022: fix bug in is_enabled function

This seems to be fallout from last October's regulator core rework.
It got noticed only because of recent regulator framework changes.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
15 years agoregulator/virtual: fix strings compare predicates
Mike Rapoport [Sun, 26 Apr 2009 08:49:30 +0000 (11:49 +0300)]
regulator/virtual: fix strings compare predicates

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
15 years agoregulator core: fix double-free in regulator_register() error path
Paul Walmsley [Sat, 25 Apr 2009 11:28:36 +0000 (05:28 -0600)]
regulator core: fix double-free in regulator_register() error path

During regulator registration, any error after device_register() will
cause a double-free on the struct regulator_dev 'rdev'.  The bug is in
drivers/regulator/core.c:regulator_register():

...
scrub:
device_unregister(&rdev->dev);
clean:
kfree(rdev);                           <---
rdev = ERR_PTR(ret);
goto out;
...

device_unregister() calls regulator_dev_release() which frees rdev.  The
subsequent kfree corrupts memory and causes some OMAP3 systems to oops on
boot in regulator_get().

Applies against 2.6.30-rc3.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
15 years agodrivers/regulator: fix when type is different from REGULATOR_VOLTAGE or REGULATOR_CURRENT
Diego Liziero [Tue, 14 Apr 2009 01:04:47 +0000 (03:04 +0200)]
drivers/regulator: fix when type is different from REGULATOR_VOLTAGE or REGULATOR_CURRENT

When regulator_desc->type is something different from REGULATOR_VOLTAGE or REGULATOR_CURRENT
the if should probably return ERR_PTR(-EINVAL)

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

@@ expression E; constant C; @@
(
- !E == C
+ E != C
)

Signed-off-by: Diego Liziero <diegoliz@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
15 years agounreachable code in drms_uA_update()
Dan Carpenter [Wed, 8 Apr 2009 10:52:39 +0000 (13:52 +0300)]
unreachable code in drms_uA_update()

I removed the extra semi-colon and indented the return statement.

The unreachable code was found by smatch (http://repo.or.cz/w/smatch.git).
The patch was compile tested.

regards,
dan carpenter

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
15 years agoregulator: fix header file missing kernel-doc
Randy Dunlap [Sat, 4 Apr 2009 04:31:30 +0000 (21:31 -0700)]
regulator: fix header file missing kernel-doc

Add regulator header file missing kernel-doc:

Warning(include/linux/regulator/driver.h:117): No description found for parameter 'set_mode'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
cc: Liam Girdwood <lrg@slimlogic.co.uk>
cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
15 years agoBluetooth: Fix connection establishment with low security requirement
Marcel Holtmann [Tue, 28 Apr 2009 16:04:55 +0000 (09:04 -0700)]
Bluetooth: Fix connection establishment with low security requirement

The Bluetooth 2.1 specification introduced four different security modes
that can be mapped using Legacy Pairing and Simple Pairing. With the
usage of Simple Pairing it is required that all connections (except
the ones for SDP) are encrypted. So even the low security requirement
mandates an encrypted connection when using Simple Pairing. When using
Legacy Pairing (for Bluetooth 2.0 devices and older) this is not required
since it causes interoperability issues.

To support this properly the low security requirement translates into
different host controller transactions depending if Simple Pairing is
supported or not. However in case of Simple Pairing the command to
switch on encryption after a successful authentication is not triggered
for the low security mode. This patch fixes this and actually makes
the logic to differentiate between Simple Pairing and Legacy Pairing
a lot simpler.

Based on a report by Ville Tervo <ville.tervo@nokia.com>

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
15 years agoBluetooth: Add different pairing timeout for Legacy Pairing
Marcel Holtmann [Sun, 26 Apr 2009 18:01:22 +0000 (20:01 +0200)]
Bluetooth: Add different pairing timeout for Legacy Pairing

The Bluetooth stack uses a reference counting for all established ACL
links and if no user (L2CAP connection) is present, the link will be
terminated to save power. The problem part is the dedicated pairing
when using Legacy Pairing (Bluetooth 2.0 and before). At that point
no user is present and pairing attempts will be disconnected within
10 seconds or less. In previous kernel version this was not a problem
since the disconnect timeout wasn't triggered on incoming connections
for the first time. However this caused issues with broken host stacks
that kept the connections around after dedicated pairing. When the
support for Simple Pairing got added, the link establishment procedure
needed to be changed and now causes issues when using Legacy Pairing

When using Simple Pairing it is possible to do a proper reference
counting of ACL link users. With Legacy Pairing this is not possible
since the specification is unclear in some areas and too many broken
Bluetooth devices have already been deployed. So instead of trying to
deal with all the broken devices, a special pairing timeout will be
introduced that increases the timeout to 60 seconds when pairing is
triggered.

If a broken devices now puts the stack into an unforeseen state, the
worst that happens is the disconnect timeout triggers after 120 seconds
instead of 4 seconds. This allows successful pairings with legacy and
broken devices now.

Based on a report by Johan Hedberg <johan.hedberg@nokia.com>

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
15 years agoBluetooth: Ensure that HCI sysfs add/del is preempt safe
Roger Quadros [Thu, 23 Apr 2009 11:50:54 +0000 (14:50 +0300)]
Bluetooth: Ensure that HCI sysfs add/del is preempt safe

Use a different work_struct variables for add_conn() and del_conn() and
use single work queue instead of two for adding and deleting connections.

It eliminates the following error on a preemptible kernel:

[  204.358032] Unable to handle kernel NULL pointer dereference at virtual address 0000000c
[  204.370697] pgd = c0004000
[  204.373443] [0000000c] *pgd=00000000
[  204.378601] Internal error: Oops: 17 [#1] PREEMPT
[  204.383361] Modules linked in: vfat fat rfcomm sco l2cap sd_mod scsi_mod iphb pvr2d drm omaplfb ps
[  204.438537] CPU: 0    Not tainted  (2.6.28-maemo2 #1)
[  204.443664] PC is at klist_put+0x2c/0xb4
[  204.447601] LR is at klist_put+0x18/0xb4
[  204.451568] pc : [<c0270f08>]    lr : [<c0270ef4>]    psr: a0000113
[  204.451568] sp : cf1b3f10  ip : cf1b3f10  fp : cf1b3f2c
[  204.463104] r10: 00000000  r9 : 00000000  r8 : bf08029c
[  204.468353] r7 : c7869200  r6 : cfbe2690  r5 : c78692c8  r4 : 00000001
[  204.474945] r3 : 00000001  r2 : cf1b2000  r1 : 00000001  r0 : 00000000
[  204.481506] Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM Segment kernel
[  204.488861] Control: 10c5387d  Table: 887fc018  DAC: 00000017
[  204.494628] Process btdelconn (pid: 515, stack limit = 0xcf1b22e0)

Signed-off-by: Roger Quadros <ext-roger.quadros@nokia.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
15 years agonet: Avoid extra wakeups of threads blocked in wait_for_packet()
Eric Dumazet [Tue, 28 Apr 2009 09:24:21 +0000 (02:24 -0700)]
net: Avoid extra wakeups of threads blocked in wait_for_packet()

In 2.6.25 we added UDP mem accounting.

This unfortunatly added a penalty when a frame is transmitted, since
we have at TX completion time to call sock_wfree() to perform necessary
memory accounting. This calls sock_def_write_space() and utimately
scheduler if any thread is waiting on the socket.
Thread(s) waiting for an incoming frame was scheduled, then had to sleep
again as event was meaningless.

(All threads waiting on a socket are using same sk_sleep anchor)

This adds lot of extra wakeups and increases latencies, as noted
by Christoph Lameter, and slows down softirq handler.

Reference : http://marc.info/?l=linux-netdev&m=124060437012283&w=2

Fortunatly, Davide Libenzi recently added concept of keyed wakeups
into kernel, and particularly for sockets (see commit
37e5540b3c9d838eb20f2ca8ea2eb8072271e403
epoll keyed wakeups: make sockets use keyed wakeups)

Davide goal was to optimize epoll, but this new wakeup infrastructure
can help non epoll users as well, if they care to setup an appropriate
handler.

This patch introduces new DEFINE_WAIT_FUNC() helper and uses it
in wait_for_packet(), so that only relevant event can wakeup a thread
blocked in this function.

Trace of function calls from bnx2 TX completion bnx2_poll_work() is :
__kfree_skb()
 skb_release_head_state()
  sock_wfree()
   sock_def_write_space()
    __wake_up_sync_key()
     __wake_up_common()
      receiver_wake_function() : Stops here since thread is waiting for an INPUT

Reported-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agopowerpc/ps3: Fix build error on UP
Geoff Levand [Thu, 16 Apr 2009 09:05:37 +0000 (09:05 +0000)]
powerpc/ps3: Fix build error on UP

A non-SMP version of smp_send_stop() is now included in smp.h.
Remove the unneeded definition in the PS3 smp.c.

Fixes build errors like these when CONFIG_SMP=n:

  arch/powerpc/platforms/ps3/setup.c:49: error: redefinition of 'smp_send_stop'
  include/linux/smp.h:125: error: previous definition of 'smp_send_stop' was here

Reported-by: Subrata Modak <subrata@linux.vnet.ibm.com>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
15 years agopowerpc/cell: Select PCI for IBM_CELL_BLADE AND CELLEB
Michael Ellerman [Wed, 22 Apr 2009 22:43:03 +0000 (22:43 +0000)]
powerpc/cell: Select PCI for IBM_CELL_BLADE AND CELLEB

Currently PPC_CELL_NATIVE selects PPC_OF_PLATFORM_PCI, but does not
select PCI. This can lead to a config with the former and the latter
disabled, which does not build.

To fix this PPC_CELL_NATIVE should select PCI. However, that would
force PCI on for QPACE, which also selects PPC_CELL_NATIVE. So
instead move the select of PPC_OF_PLATFORM_PCI and PCI under both
IBM_CELL_BLADE and CELLEB.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
15 years agopowerpc: ppc32 needs elf_read_implies_exec()
Kumar Gala [Fri, 17 Apr 2009 08:03:01 +0000 (08:03 +0000)]
powerpc: ppc32 needs elf_read_implies_exec()

On ppc64 we implemented elf_read_implies_exec() for 32-bit binaries
because old toolchains had bugs where they didn't mark program
segments executable that needed to be.  For some reason we didn't do
this on ppc32 builds.  This hadn't been an issue until commit 8d30c14c
("powerpc/mm: Rework I$/D$ coherency (v3)"), which had as a side
effect that we are now enforcing execute permissions to some extent on
32-bit 4xx and Book E processors.

This fixes it by defining elf_read_implies_exec on 32-bit to turn on
the read-implies-exec behaviour on programs that are sufficiently old
that they don't have a PT_GNU_STACK program header.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
15 years agoRemove unused support code for refok sections.
Tim Abbott [Mon, 27 Apr 2009 18:02:27 +0000 (14:02 -0400)]
Remove unused support code for refok sections.

The old refok sections

  .text.init.refok
  .data.init.refok
  .exit.text.refok

have been deprecated since commit
312b1485fb509c9bc32eda28ad29537896658cb8.  After the other patches in
this patch series nothing is put in these sections, so clean things up
by eliminating all the remaining references to them.

Signed-off-by: Tim Abbott <tabbott@mit.edu>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agosparc: cleanup references to deprecated .text.init* sections.
Tim Abbott [Mon, 27 Apr 2009 18:02:26 +0000 (14:02 -0400)]
sparc: cleanup references to deprecated .text.init* sections.

The section .text.init.refok is deprecated and __REF (.ref.text)
should be used in assembly files instead.  This patch cleans up a few
uses of .text.init.refok in the sparc architecture.

Also fix a reference to .text.init in a comment that wasn't updated to
.init.text.

Signed-off-by: Tim Abbott <tabbott@mit.edu>
Cc: David S. Miller <davem@davemloft.net>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agosh: Use __INIT macro instead of .text.init.
Tim Abbott [Mon, 27 Apr 2009 18:02:25 +0000 (14:02 -0400)]
sh: Use __INIT macro instead of .text.init.

The sh architecture has some code in the .text.init section, but it
does not reference that section in its linker scripts.

This change moves this code from the .text.init section to the
.init.text section, which is presumably where it belongs.

Signed-off-by: Tim Abbott <tabbott@mit.edu>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agopowerpc: Use __REF macro instead of old .text.init.refok.
Tim Abbott [Mon, 27 Apr 2009 18:02:24 +0000 (14:02 -0400)]
powerpc: Use __REF macro instead of old .text.init.refok.

The section .text.init.refok is deprecated and __REF (.ref.text)
should be used in assembly files instead.  This patch cleans up a few
uses of .text.init.refok in the powerpc architecture.

Signed-off-by: Tim Abbott <tabbott@mit.edu>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agopowerpc: Use TEXT_TEXT macro in linker script.
Tim Abbott [Mon, 27 Apr 2009 18:02:23 +0000 (14:02 -0400)]
powerpc: Use TEXT_TEXT macro in linker script.

Rather than adding .ref.text to the powerpc linker script so that we
can use __REF on the powerpc architecture, it seems simpler to switch
to using the generic TEXT_TEXT macro.

Signed-off-by: Tim Abbott <tabbott@mit.edu>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoarm: Use __INIT macro instead of .text.init.
Tim Abbott [Mon, 27 Apr 2009 18:02:22 +0000 (14:02 -0400)]
arm: Use __INIT macro instead of .text.init.

arm is placing some code in the .text.init section, but it does not
reference that section in its linker scripts.

This change moves this code from the .text.init section to the
.init.text section, which is presumably where it belongs.

Signed-off-by: Tim Abbott <tabbott@mit.edu>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoFRV: Use __INIT macro instead of .text.init.
Tim Abbott [Mon, 27 Apr 2009 23:37:58 +0000 (00:37 +0100)]
FRV: Use __INIT macro instead of .text.init.

FRV is placing some code in the .text.init section but does not reference that
section in its linker scripts.

This change moves this code from the .text.init section to the .init.text
section, which is presumably where it belongs.

Signed-off-by: Tim Abbott <tabbott@mit.edu>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoFRV: Remove unused header asm/init.h.
Tim Abbott [Mon, 27 Apr 2009 23:37:53 +0000 (00:37 +0100)]
FRV: Remove unused header asm/init.h.

It seems nothing has included the frv asm/init.h header for some time, and its
actual contents are out of date with include/linux/init.h.  So just delete it.

Signed-off-by: Tim Abbott <tabbott@mit.edu>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoMerge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc...
Paul Mackerras [Tue, 28 Apr 2009 00:47:16 +0000 (10:47 +1000)]
Merge branch 'merge' of git://git./linux/kernel/git/jwboyer/powerpc-4xx into merge

15 years agoRDMA/nes: Update iw_nes version
Chien Tung [Mon, 27 Apr 2009 20:46:29 +0000 (13:46 -0700)]
RDMA/nes: Update iw_nes version

Update version number to 1.5.0.0

Signed-off-by: Chien Tung <chien.tin.tung@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
15 years agoRDMA/nes: Fix error path in nes_accept()
Faisal Latif [Mon, 27 Apr 2009 20:45:19 +0000 (13:45 -0700)]
RDMA/nes: Fix error path in nes_accept()

If reg_phys_mem() fails, we need to free memory allocated for MPA
frame with private data before returning the error. Also move
nes_add_ref() after the reg_phys_mem() is successful.

Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
15 years agoRDMA/nes: Fix hang issues for large cluster dynamic connections
Faisal Latif [Mon, 27 Apr 2009 20:41:06 +0000 (13:41 -0700)]
RDMA/nes: Fix hang issues for large cluster dynamic connections

Running large cluster setup, we are hanging after many hours of
testing.  Fixing this required going over the code and making sure the
rexmit entry was properly removed based on the cm_node's state and
packet received.  Also when receiving a FIN packet, check seq# and
make sure there were no errors before calling handle_fin().

Following are the changes done in nes_cm.c:

* handle_ack_pkt() needs to return error value, so in case of error,
  handle_fin() is not called. Some cleanup done while going over the code.

* handle_rst_pkt(), handling of cm_node's NES_CM_STATE_LAST_ACK is missing.

* process_packet(), in case of FIN only packet is received, call
  check_seq() before processing.

* in handle_fin_pkt(), we are calling cleanup_retrans_entry() for all
  conditions, even if the packets need to be dropped.

Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
15 years agoRDMA/nes: Increase rexmit timeout interval
Faisal Latif [Mon, 27 Apr 2009 20:39:36 +0000 (13:39 -0700)]
RDMA/nes: Increase rexmit timeout interval

Under heavy load with large cluster testing, it may take longer to
receive a response to MPA requests.  Change the driver to wait longer
after each rexmit to max time value.

Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
15 years agoRDMA/nes: Check for sequence number wrap-around
Faisal Latif [Mon, 27 Apr 2009 20:38:31 +0000 (13:38 -0700)]
RDMA/nes: Check for sequence number wrap-around

check_seq() was not checking if the seq#s have wrapped.  Fix it.

Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
15 years agoRDMA/nes: Do not set apbvt entry for loopback
Faisal Latif [Mon, 27 Apr 2009 20:37:34 +0000 (13:37 -0700)]
RDMA/nes: Do not set apbvt entry for loopback

When a connect request comes, apbvt should only be set for
non-loopback connections.

Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
15 years agoRDMA/nes: Fix unused variable compile warning when INFINIBAND_NES_DEBUG=n
Chien Tung [Mon, 27 Apr 2009 20:36:03 +0000 (13:36 -0700)]
RDMA/nes: Fix unused variable compile warning when INFINIBAND_NES_DEBUG=n

Remove the NES_DEBUG that is causing the compile warning about an
unused variable when INFINIBAND_NES_DEBUG is not enabled.

Signed-off-by: Chien Tung <chien.tin.tung@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
15 years agoRDMA/nes: Fix fw_ver in /sys
Chien Tung [Mon, 27 Apr 2009 20:33:48 +0000 (13:33 -0700)]
RDMA/nes: Fix fw_ver in /sys

/sys/class/infiniband/nes?/fw_ver is not displaying firmware version
properly (it shows 0.0.0 with the current code).  Fill in the correct
firmware version number.

Signed-off-by: Chien Tung <chien.tin.tung@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
15 years agoRDMA/nes: Set trace length to 1 inch for SFP_D
Chien Tung [Mon, 27 Apr 2009 20:30:35 +0000 (13:30 -0700)]
RDMA/nes: Set trace length to 1 inch for SFP_D

With updated PHY firmware for SFP_D, setting the trace length to 1
inch for SFP_D provides a more stable link.

Signed-off-by: Chien Tung <chien.tin.tung@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
15 years agoRDMA/nes: Enable repause timer for port 1
Chien Tung [Mon, 27 Apr 2009 20:29:42 +0000 (13:29 -0700)]
RDMA/nes: Enable repause timer for port 1

Enable repause timer for port 1.  Without this setting, under stress,
the chip may misbehave.

Signed-off-by: Chien Tung <chien.tin.tung@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
15 years agoRDMA/nes: Correct CDR loop filter setting for port 1
Chien Tung [Mon, 27 Apr 2009 20:28:41 +0000 (13:28 -0700)]
RDMA/nes: Correct CDR loop filter setting for port 1

In commit 1b949324 ("RDMA/nes: Fix SFP+ PHY initialization") there is
a mistake in the clean up code that removed port 1 CDR loop filter
settings for 10G cards other than CX4.  Put the correct setting back
for appropriate PHY types.

Signed-off-by: Chien Tung <chien.tin.tung@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
15 years agoRDMA/nes: Modify thermo mitigation to flip SerDes1 ref clk to internal
Chien Tung [Mon, 27 Apr 2009 20:27:21 +0000 (13:27 -0700)]
RDMA/nes: Modify thermo mitigation to flip SerDes1 ref clk to internal

Change thermo mitigation code to flip the SerDes1 reference clock to
internal, to match the change in commit a4849fc1 ("RDMA/nes: Add
wide_ppm_offset parm for switch compatibility").

Signed-off-by: Chien Tung <chien.tin.tung@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
15 years agoRevert "linux.conf.au 2009: Tuz"
Linus Torvalds [Mon, 27 Apr 2009 19:00:27 +0000 (12:00 -0700)]
Revert "linux.conf.au 2009: Tuz"

This reverts commit 8032b526d1a3bd91ad633dd3a3b5fdbc47ad54f1.

Hey, it was only meant to be a single release.  Now they can all die as
far as I'm concerned.

[ Just kidding.  They're cute and cuddly.

  Except when they have horrible nasty facial diseases.  Oh, and I guess
  they're not actually that cuddly even when disease-free. ]

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes...
Linus Torvalds [Mon, 27 Apr 2009 18:59:46 +0000 (11:59 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jbarnes/pci-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI: only save/restore existent registers in the PCIe capability
  x86/PCI: don't bother with root quirks if _CRS is used
  docbooks: add/fix PCI kernel-doc
  PCI: cleanup debug output resources
  x86/PCI: set_pci_bus_resources_arch_default cleanups
  x86/PCI: Move set_pci_bus_resources_arch_default into arch/x86
  x86/PCI: don't call e820_all_mapped with -1 in the mmconfig case
  PCI quirk: disable MSI on VIA VT3364 chipsets

15 years agoeCryptfs: Fix min function comparison warning
Tyler Hicks [Mon, 27 Apr 2009 18:31:12 +0000 (13:31 -0500)]
eCryptfs: Fix min function comparison warning

This warning shows up on 64 bit builds:

fs/ecryptfs/inode.c:693: warning: comparison of distinct pointer types
lacks a cast

Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
15 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable
Linus Torvalds [Mon, 27 Apr 2009 18:16:33 +0000 (11:16 -0700)]
Merge git://git./linux/kernel/git/mason/btrfs-unstable

* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
  Btrfs: look for acls during btrfs_read_locked_inode
  Btrfs: fix acl caching
  Btrfs: Fix a bunch of printk() warnings.
  Btrfs: Fix a trivial warning using max() of u64 vs ULL.
  Btrfs: remove unused btrfs_bit_radix slab
  Btrfs: ratelimit IO error printks
  Btrfs: remove #if 0 code
  Btrfs: When shrinking, only update disk size on success
  Btrfs: fix deadlocks and stalls on dead root removal
  Btrfs: fix fallocate deadlock on inode extent lock
  Btrfs: kill btrfs_cache_create
  Btrfs: don't export symbols
  Btrfs: simplify makefile
  Btrfs: try to keep a healthy ratio of metadata vs data block groups

15 years agoecryptfs: fix printk format warning
Randy Dunlap [Tue, 28 Apr 2009 04:24:28 +0000 (21:24 -0700)]
ecryptfs: fix printk format warning

fs/ecryptfs/inode.c:670: warning: format '%d' expects type 'int', but argument 3 has type 'size_t'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Cc: Dustin Kirkland <kirkland@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
15 years agopowerpc/86xx: Add device_type entry to soc for ppc9a
Martyn Welch [Mon, 27 Apr 2009 16:24:28 +0000 (17:24 +0100)]
powerpc/86xx: Add device_type entry to soc for ppc9a

The 'device_type = "soc";' line *is* needed in the DTS for get_immrbase()
to return the correct address.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15 years agoBtrfs: look for acls during btrfs_read_locked_inode
Chris Mason [Mon, 27 Apr 2009 15:47:50 +0000 (11:47 -0400)]
Btrfs: look for acls during btrfs_read_locked_inode

This changes btrfs_read_locked_inode() to peek ahead in the btree for acl items.
If it is certain a given inode has no acls, it will set the in memory acl
fields to null to avoid acl lookups completely.

Signed-off-by: Chris Mason <chris.mason@oracle.com>