GitHub/LineageOS/android_kernel_motorola_exynos9610.git
19 years ago[PATCH] Remove unused header.
Ralf Baechle [Tue, 18 Oct 2005 20:01:29 +0000 (21:01 +0100)]
[PATCH] Remove unused header.

mkiss.h has been integrated into mkiss.c earlier.

Signed-off-by: Ralf Baechle DL5RB <ralf@linux-mips.org>
 drivers/net/hamradio/mkiss.h |   62 -------------------------------------------
 1 files changed, 62 deletions(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
19 years ago[PATCH] e1000 build fix
Andrew Morton [Sat, 15 Oct 2005 07:32:29 +0000 (00:32 -0700)]
[PATCH] e1000 build fix

Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
19 years ago[PATCH] sundance: expand reset mask
John W. Linville [Wed, 19 Oct 2005 01:31:02 +0000 (21:31 -0400)]
[PATCH] sundance: expand reset mask

Expand the mask used when reseting the chip to include the GlobalReset
bit.  This fix comes from ICPlus and seems to be required for some
cards.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
19 years ago[PATCH] sundance: remove if (1) { ... } block in sundance_probe1
John W. Linville [Wed, 19 Oct 2005 01:31:01 +0000 (21:31 -0400)]
[PATCH] sundance: remove if (1) { ... } block in sundance_probe1

Remove an if (1) { ... } block in sundance_probe1.  Its purpose seems
to be only to allow for delaring some extra local variables.  But, it also
adds ugly indentation without adding any meaning to the code.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
19 years ago[PATCH] orinoco: remove redundance skb length check before padding
John W. Linville [Wed, 19 Oct 2005 01:30:58 +0000 (21:30 -0400)]
[PATCH] orinoco: remove redundance skb length check before padding

Checking the skb->len value before calling skb_padto is redundant.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
19 years ago[PATCH] b44: alternate allocation option for DMA descriptors
John W. Linville [Wed, 19 Oct 2005 01:30:59 +0000 (21:30 -0400)]
[PATCH] b44: alternate allocation option for DMA descriptors

This is a (final?) hack to support the odd DMA allocation requirements
of the b44 hardware.  The b44 hardware has a 30-bit DMA mask.  On x86,
anything less than a 32-bit DMA mask forces allocations into the 16MB
GFP_DMA range.  The memory there is somewhat limited, often resulting
in an inability to initialize the b44 driver.

This hack uses streaming DMA allocation APIs in order to provide an
alternative in case the GFP_DMA allocation fails.  It is somewhat ugly,
but not much worse than the similar existing hacks to support SKB
allocations in the same driver.  FWIW, I have received positive
feedback on this from several Fedora users.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
19 years ago[PATCH] bonding: cleanup comment for mode 1 IGMP xmit hack
John W. Linville [Wed, 19 Oct 2005 01:30:58 +0000 (21:30 -0400)]
[PATCH] bonding: cleanup comment for mode 1 IGMP xmit hack

Expand comment explaining MAC address selection for replicated IGMP
frames transmitted in bonding mode 1 (active-backup).  Also, a small
whitespace cleanup.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
19 years ago[PATCH] 8139too: fix resume for Realtek 8100B/8139D
John W. Linville [Wed, 19 Oct 2005 01:31:00 +0000 (21:31 -0400)]
[PATCH] 8139too: fix resume for Realtek 8100B/8139D

Add "HasHltClk" flag for RTL-8100B/8139D hardware in order to fix
problems resuming from suspend-to-RAM.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
19 years ago[PATCH] bonding: fix typos in bonding documentation
John W. Linville [Wed, 19 Oct 2005 01:30:59 +0000 (21:30 -0400)]
[PATCH] bonding: fix typos in bonding documentation

Fix some simple typos in the bonding.txt file.  The typos are in areas
relating to loading the bonding driver multiple times.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
19 years ago[PATCH] epic100: fix counting of work_done in epic_poll
John W. Linville [Wed, 19 Oct 2005 01:31:01 +0000 (21:31 -0400)]
[PATCH] epic100: fix counting of work_done in epic_poll

work_done is overwritten each time through the rx_action loop in
epic_poll.  This screws-up the NAPI accounting if the loop is executed
more than once.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
19 years ago[PATCH] via-rhine: change mdelay to msleep and remove from ISR path
John W. Linville [Wed, 19 Oct 2005 01:31:02 +0000 (21:31 -0400)]
[PATCH] via-rhine: change mdelay to msleep and remove from ISR path

Get rid of the mdelay call in rhine_disable_linkmon.  The function
is called from the via-rhine versions of mdio_read and mdio_write.
Those functions are indirectly called from rhine_check_media and
rhine_tx_timeout, both of which can be called in interrupt context.

So, create tx_timeout_task and check_media_task as instances of struct
work_struct inside of rhine_private.  Then, change rhine_tx_timeout to
invoke schedule_work for tx_timeout_task (i.e. rhine_tx_timeout_task),
moving the work to process context.  Also, change rhine_error (invoked
from rhine_interrupt) to invoke schedule_work for check_media_task
(i.e. rhine_check_media_task), which simply calls rhine_check media
in process context.  Finally, add a call to flush_scheduled_work in
rhine_close to avoid any resource conflicts with pending work items.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
19 years ago[PATCH] s2io build fix
Andrew Morton [Sun, 16 Oct 2005 07:11:29 +0000 (00:11 -0700)]
[PATCH] s2io build fix

Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
19 years ago[PATCH] e1000_intr build fix
Andrew Morton [Sun, 16 Oct 2005 20:32:14 +0000 (13:32 -0700)]
[PATCH] e1000_intr build fix

drivers/net/e1000/e1000_main.c: In function `e1000_intr':
drivers/net/e1000/e1000_main.c:3156: error: `i' undeclared (first use in this function)
drivers/net/e1000/e1000_main.c:3156: error: (Each undeclared identifier is reported only once
drivers/net/e1000/e1000_main.c:3156: error: for each function it appears in.)

This function is foul.

Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
19 years ago[PATCH] mipsnet: Virtual ethernet driver for MIPSsim.
Ralf Baechle [Mon, 10 Oct 2005 13:51:27 +0000 (14:51 +0100)]
[PATCH] mipsnet: Virtual ethernet driver for MIPSsim.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
 drivers/net/Kconfig   |    8 +
 drivers/net/Makefile  |    1
 drivers/net/mipsnet.c |  371 ++++++++++++++++++++++++++++++++++++++++++++++++++
 drivers/net/mipsnet.h |  127 +++++++++++++++++
 4 files changed, 507 insertions(+)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
19 years ago[PATCH] ne: Support for RBHMA4500 eval board.
Ralf Baechle [Mon, 10 Oct 2005 13:51:21 +0000 (14:51 +0100)]
[PATCH] ne: Support for RBHMA4500 eval board.

Support for Toshiba's RBHMA4500 eval board for the TX4938.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
 drivers/net/ne.c |   15 +++++++++++++++
 1 files changed, 15 insertions(+)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
19 years ago[PATCH] declance: Use physical addresses at the interface level.
Ralf Baechle [Mon, 10 Oct 2005 13:51:16 +0000 (14:51 +0100)]
[PATCH] declance: Use physical addresses at the interface level.

Use physical addresses at the interface level, letting drivers remap
them as appropriate.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
 drivers/net/declance.c |   26 ++++++++++----------------
 1 files changed, 10 insertions(+), 16 deletions(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
19 years ago[PATCH] declance: Deal with the bloody KSEG vs CKSEG horror...
Ralf Baechle [Mon, 10 Oct 2005 13:51:11 +0000 (14:51 +0100)]
[PATCH] declance: Deal with the bloody KSEG vs CKSEG horror...

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
 drivers/net/declance.c |    2 +-
 1 files changed, 1 insertion(+), 1 deletion(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
19 years ago[PATCH] declance: Fix mapping of device.
Ralf Baechle [Mon, 10 Oct 2005 13:51:06 +0000 (14:51 +0100)]
[PATCH] declance: Fix mapping of device.

These should really be addresses obtained with ioremap() or some
bus-specific backend, but for now...

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
 drivers/net/declance.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
19 years ago[PATCH] declance: Convert to irqreturn_t.
Ralf Baechle [Mon, 10 Oct 2005 13:51:01 +0000 (14:51 +0100)]
[PATCH] declance: Convert to irqreturn_t.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
 drivers/net/declance.c |    5 +++--
 1 files changed, 3 insertions(+), 2 deletions(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
19 years ago[PATCH] sgiseeq: Configure PIO and DMA timing requests.
Ralf Baechle [Mon, 10 Oct 2005 13:50:56 +0000 (14:50 +0100)]
[PATCH] sgiseeq: Configure PIO and DMA timing requests.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
 drivers/net/sgiseeq.c       |   28 ++++++++++++++--------------
 include/asm-mips/sgi/hpc3.h |   40 ++++++++++++++++++++--------------------
 2 files changed, 34 insertions(+), 34 deletions(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
19 years ago[PATCH] sgiseeq: Fix resource handling.
Ralf Baechle [Mon, 10 Oct 2005 13:50:51 +0000 (14:50 +0100)]
[PATCH] sgiseeq: Fix resource handling.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
 drivers/net/sgiseeq.c |    9 ++++-----
 1 files changed, 4 insertions(+), 5 deletions(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
19 years ago[PATCH] de2104x: Resurrect Cobalt support for 2.6.
Ralf Baechle [Mon, 10 Oct 2005 13:50:46 +0000 (14:50 +0100)]
[PATCH] de2104x: Resurrect Cobalt support for 2.6.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
 drivers/net/tulip/de2104x.c |    5 +++++
 1 files changed, 5 insertions(+)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
19 years ago[PATCH] au1000_eth: Misc Au1000 net driver fixes.
Ralf Baechle [Mon, 10 Oct 2005 13:50:41 +0000 (14:50 +0100)]
[PATCH] au1000_eth: Misc Au1000 net driver fixes.

 o Add support for DP83847 MII.
 o remove unused variable.
 o Add some initialisations so even an unknown MII won't result in a crash.
 o Correct error message to "no known MIIs found".

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
 drivers/net/au1000_eth.c |   13 +++++--------
 1 files changed, 5 insertions(+), 8 deletions(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
19 years ago[PATCH] sb1250-mac: Ensure 16-byte alignment of the descriptor ring.
Ralf Baechle [Mon, 10 Oct 2005 13:50:36 +0000 (14:50 +0100)]
[PATCH] sb1250-mac: Ensure 16-byte alignment of the descriptor ring.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
 drivers/net/sb1250-mac.c |    9 ++++++++-
 1 files changed, 8 insertions(+), 1 deletion(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
19 years ago[PATCH] sb1250-mac: Check the actual setting for reporting hw checksumming.
Ralf Baechle [Mon, 10 Oct 2005 13:50:24 +0000 (14:50 +0100)]
[PATCH] sb1250-mac: Check the actual setting for reporting hw checksumming.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
 drivers/net/sb1250-mac.c |    2 +-
 1 files changed, 1 insertion(+), 1 deletion(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
19 years ago[PATCH] ieee80211: division by zero fix
Jiri Benc [Mon, 10 Oct 2005 17:16:53 +0000 (19:16 +0200)]
[PATCH] ieee80211: division by zero fix

This fixes division by zero bug in ieee80211_wx_get_scan().

Signed-off-by: Jiri Benc <jbenc@suse.cz>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
19 years agoMerge branch 'master'
Jeff Garzik [Tue, 18 Oct 2005 21:14:17 +0000 (17:14 -0400)]
Merge branch 'master'

19 years ago[PATCH] Initialize the .owner field the tty_ldisc structure.
Ralf Baechle [Wed, 12 Oct 2005 22:11:01 +0000 (23:11 +0100)]
[PATCH] Initialize the .owner field the tty_ldisc structure.

If .owner isn't set the module can be unloaded even while still active.

Signed-off-by: Ralf Baechle DL5RB <ralf@linux-mips.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
19 years ago[PATCH] SMACK support for mkiss
Ralf Baechle [Fri, 14 Oct 2005 13:28:09 +0000 (14:28 +0100)]
[PATCH] SMACK support for mkiss

SMACK (Stuttgart Modified Amateurradio CRC KISS) is a KISS variant that
uses CRC16 checksums to secure data transfers between the modem and host.
It's also used to communicate over a pty to applications such as Wampes.

Patches for Linux 2.4 by Thomas Osterried DL9SAU, upgraded to the latest
mkiss 2.6 mkiss driver by me.

Signed-off-by: Thomas Osterried DL9SAU <thomas@x-berg.in-berlin.de>
Signed-off-by: Ralf Baechle DL5RB <ralf@linux-mips.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
19 years ago[PATCH] rcu in bpqether driver.
Ralf Baechle [Mon, 17 Oct 2005 11:42:32 +0000 (12:42 +0100)]
[PATCH] rcu in bpqether driver.

From Suzanne Wood <suzannew@cs.pdx.edu>:

Clarify RCU implementation in bpqether.c.

Because bpq_new_device() calls list_add_rcu() and bpq_free_device() calls
list_del_rcu(), substitute list_for_each_entry_rcu() for
list_for_each_entry() in bpq_get_ax25_dev() and in bpq_seq_start().

Add rcu dereference protection in bpq_seq_next().

The rcu_read_lock()/unlock() in bpq_device_event() are removed because
netdev event handlers are called with RTNL locking in place.

FYI: bpq_free_device() calls list_del_rcu() which, per list.h, requires
synchronize_rcu() which can block or call_rcu() or call_rcu_bh() which
cannot block.  Herbert Xu notes that synchronization is done here by
unregister_netdevice().  This calls synchronize_net() which in turn uses
synchronize_rcu().

Signed-off-by: Ralf Baechle DL5RB <ralf@linux-mips.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
19 years ago[PATCH] S2io: Offline diagnostics fixes
ravinandan.arakali@neterion.com [Tue, 18 Oct 2005 01:26:20 +0000 (18:26 -0700)]
[PATCH] S2io: Offline diagnostics fixes

This patch fixes the following bugs with offline diagnostics
code(run with "ethtool -t").

1. After running offline diagnostics, adapter would report
corrupted packets on receive. This was because of adapter not
being brought out of "RLDRAM test mode".
2. Current EEPROM test works only for Xframe I. Since Xframe II
uses different interface(SPI), support for this interface has
been added. Also, since SPI supports write access to all areas
of EEPROM, negative testing is done only for Xframe I.
3. Return values from subfunctions of offline diagnostics have
been corrected.
4. In register test, expected value from rx_queue_cfg register
is made to depend on adapter type.
5. After the test, need to restore values at EEPROM offsets
0x4F0 and 0x7F0. These locations were modified as part of test.
6. Use macro SPECIAL_REG_WRITE for write access to mc_rldram_test_ctrl
register. Also, couple of unnecessary writes to mc_rldram_test_ctrl
have been removed.

Signed-off-by: Ravinandan Arakali <ravinandan.arakali@neterion.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
19 years ago[PATCH] kbuild: Eliminate build error when KALLSYMS not defined
Mark Rustad [Mon, 17 Oct 2005 23:43:34 +0000 (16:43 -0700)]
[PATCH] kbuild: Eliminate build error when KALLSYMS not defined

The following build error happens with 2.6.14-rc4 when CONFIG_KALLSYMS is
not defined.  The error message in a fragment of the output was:

  CC      arch/i386/lib/usercopy.o
  AR      arch/i386/lib/lib.a
/bin/sh: line 1: +@: command not found
make[3]: warning: jobserver unavailable: using -j1.  Add `+' to parent make rule.
  CHK     include/linux/compile.h

Signed-off-by: Mark Rustad <mrustad@mac.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] aio: revert lock_kiocb()
Zach Brown [Mon, 17 Oct 2005 23:43:33 +0000 (16:43 -0700)]
[PATCH] aio: revert lock_kiocb()

lock_kiocb() was introduced to serialize retrying and cancellation.  In the
process of doing so it tried to sleep waiting for KIF_LOCKED while holding
the ctx_lock spinlock.  Recent fixes have ensured that multiple concurrent
retries won't be attempted for a given iocb.  Cancel has other problems and
has no significant in-tree users that have been complaining about it.  So
for the immediate future we'll revert sleeping with the lock held and will
address proper cancellation and retry serialization in the future.

Signed-off-by: Zach Brown <zach.brown@oracle.com>
Acked-by: Benjamin LaHaise <bcrl@kvack.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] uniput - fix crash on SMP
Dmitry Torokhov [Mon, 17 Oct 2005 23:43:32 +0000 (16:43 -0700)]
[PATCH] uniput - fix crash on SMP

Only signal completion after marking request slot as free, otherwise other
processor can free request structure before we finish using it.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] Fix /proc/acpi/events around suspend
Pavel Machek [Mon, 17 Oct 2005 23:43:31 +0000 (16:43 -0700)]
[PATCH] Fix /proc/acpi/events around suspend

Fix -EIO on /proc/acpi/events after suspends.  This actually breaks
suspending by power button in many setups.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] n_r3964 mod_timer() fix
Stephan Brodkorb [Mon, 17 Oct 2005 23:43:30 +0000 (16:43 -0700)]
[PATCH] n_r3964 mod_timer() fix

Since Revision 1.10 was released the n_r3964 module wasn't able to receive any
data.  The reason for that behavior is because there were some wrong calls of
mod_timer(...) in the function receive_char (...).  This patch should fix this
problem and was successfully tested with talking to some kuka industrial
robots.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] output of /proc/maps on nommu systems is incomplete
David McCullough [Mon, 17 Oct 2005 23:43:29 +0000 (16:43 -0700)]
[PATCH] output of /proc/maps on nommu systems is incomplete

Currently you do not get all the map entries on nommu systems because the
start function doesn't index into the list using the value of "pos".

Signed-off-by: David McCullough <davidm@snapgear.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] rcu: keep rcu callback event counter
Eric Dumazet [Mon, 17 Oct 2005 18:01:21 +0000 (20:01 +0200)]
[PATCH] rcu: keep rcu callback event counter

This makes call_rcu() keep track of how many events there are on the RCU
list, and cause a reschedule event when the list gets too long.

This helps keep RCU event lists down.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] Fix and clean up quirk_intel_ide_combined() configuration
Jeff Garzik [Mon, 17 Oct 2005 17:01:57 +0000 (13:01 -0400)]
[PATCH] Fix and clean up quirk_intel_ide_combined() configuration

This change makes quirk_intel_ide_combined() dependent on the precise
conditions under which it is needed:

* IDE is built in
* IDE SATA option is not set
* ata_piix or ahci drivers are enabled

This fixes an issue where some modular configurations would not cause
the quirk to be enabled.

Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Linus torvalds <torvalds@osdl.org>
19 years ago[PATCH] posix-timers: fix task accounting
Oleg Nesterov [Mon, 17 Oct 2005 14:49:42 +0000 (18:49 +0400)]
[PATCH] posix-timers: fix task accounting

Make sure we release the task struct properly when releasing pending
timers.

release_task() does write_lock_irq(&tasklist_lock), so it can't race
with run_posix_cpu_timers() on any cpu.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] NFS: Fix Oopsable/unnecessary i_count manipulations in nfs_wait_on_inode()
Trond Myklebust [Mon, 17 Oct 2005 10:03:23 +0000 (06:03 -0400)]
[PATCH] NFS: Fix Oopsable/unnecessary i_count manipulations in nfs_wait_on_inode()

Oopsable since nfs_wait_on_inode() can get called as part of iput_final().

Unnecessary since the caller had better be damned sure that the inode won't
disappear from underneath it anyway.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] NFS: Fix cache consistency races
Trond Myklebust [Mon, 17 Oct 2005 10:02:00 +0000 (06:02 -0400)]
[PATCH] NFS: Fix cache consistency races

If the data cache has been marked as potentially invalid by nfs_refresh_inode,
we should invalidate it rather than assume that changes are due to our own
activity.

Also ensure that we always start with a valid cache before declaring it
to be protected by a delegation.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] USB: fix bug in handling of highspeed usb HID devices
Christian Krause [Mon, 17 Oct 2005 21:30:48 +0000 (14:30 -0700)]
[PATCH] USB: fix bug in handling of highspeed usb HID devices

During the development of an USB device I found a bug in the handling of
Highspeed HID devices in the kernel.

What happened?

Highspeed HID devices are correctly recognized and enumerated by the
kernel. But even if usbhid kernel module is loaded, no HID reports are
received by the kernel.

The output of the hardware USB analyzer told me that the host doesn't
even poll for interrupt IN transfers (even the "interrupt in" USB
transfer are polled by the host).

After some debugging in hid-core.c I've found the reason.

In case of a highspeed device, the endpoint interval is re-calculated in
driver/usb/input/hid-core.c:

line 1669:
             /* handle potential highspeed HID correctly */
             interval = endpoint->bInterval;
             if (dev->speed == USB_SPEED_HIGH)
                   interval = 1 << (interval - 1);

Basically this calculation is correct (refer to USB 2.0 spec, 9.6.6).
This new calculated value of "interval" is used as input for
usb_fill_int_urb:

line 1685:

            usb_fill_int_urb(hid->urbin, dev, pipe, hid->inbuf, 0,
                   hid_irq_in, hid, interval);

Unfortunately the same calculation as above is done a second time in
usb_fill_int_urb in the file include/linux/usb.h:

line 933:
        if (dev->speed == USB_SPEED_HIGH)
                urb->interval = 1 << (interval - 1);
        else
                urb->interval = interval;

This means, that if the endpoint descriptor (of a high speed device)
specifies e.g. bInterval = 7, the urb->interval gets the value:

hid-core.c: interval = 1 << (7-1) = 0x40 = 64
urb->interval = 1 << (interval -1) = 1 << (63) = integer overflow

Because of this the value of urb->interval is sometimes negative and is
rejected in core/urb.c:
line 353:
                /* too small? */
                if (urb->interval <= 0)
                        return -EINVAL;

The conclusion is, that the recalculaton of the interval (which is
necessary for highspeed) should not be made twice, because this is
simply wrong. ;-)

Re-calculation in usb_fill_int_urb makes more sense, because it is the
most general approach. So it would make sense to remove it from
hid-core.c.

Because in hid-core.c the interval variable is only used for calling
usb_fill_int_urb, it is no problem to remove the highspeed
re-calculation in this file.

Signed-off-by: Christian Krause <chkr@plauener.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] isp116x-hcd: fix handling of short transfers
Olav Kongas [Mon, 17 Oct 2005 21:30:43 +0000 (14:30 -0700)]
[PATCH] isp116x-hcd: fix handling of short transfers

Increased use of scatter-gather by usb-storage driver after 2.6.13 has
exposed a buggy codepath in isp116x-hcd, which was probably never
visited before: bug happened only for those urbs, for which
URB_SHORT_NOT_OK was set AND short transfer occurred.

The fix attached was tested in 2 ways: (a) it fixed failing
initialization of a flash drive with an embedded hub; (b) the fix was
tested with 'usbtest' against a modified g_zero driver (on top of
net2280), which generated short bulk IN transfers of various lengths
including multiples and non-multiples of max_packet_length.

Signed-off-by: Olav Kongas <ok@artecdesign.ee>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years agoIncrease default RCU batching sharply
Linus Torvalds [Mon, 17 Oct 2005 16:10:15 +0000 (09:10 -0700)]
Increase default RCU batching sharply

Dipankar made RCU limit the batch size to improve latency, but that
approach is unworkable: it can cause the RCU queues to grow without
bounds, since the batch limiter ended up limiting the callbacks.

So make the limit much higher, and start planning on instead limiting
the batch size by doing RCU callbacks more often if the queue looks like
it might be growing too long.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] fix black/white-only svideo input in vpx3220 decoder
Ronald S. Bultje [Mon, 17 Oct 2005 03:29:25 +0000 (20:29 -0700)]
[PATCH] fix black/white-only svideo input in vpx3220 decoder

Fix the fact that the svideo input will only give input in black/white in
some circumstances.  Reason is that in the PCI controller driver (zr36067),
after setting input, we reset norm, which overwrites the input register
with the default.  This patch makes it always set the correct value for the
input when changing norm.

Signed-off-by: Ronald S. Bultje <rbultje@ronald.bitfreak.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] fix vpx3220 offset issue in SECAM
Ronald S. Bultje [Mon, 17 Oct 2005 03:29:24 +0000 (20:29 -0700)]
[PATCH] fix vpx3220 offset issue in SECAM

Fix bug #5404 in kernel bugzilla.

It basically updates the vpx3220 initialization tables with some newer
values that we've had in CVS for a while (and that, for some reason, never
ended up in the kernel...  must've gotten lost).  Those fix a ~16 pixels
noise at the top of the picture in at least SECAM, although (now that I
think about it) PAL was probably affected, also.

Signed-off-by: Ronald S. Bultje <rbultje@ronald.bitfreak.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] SVGATextMode fix
Samuel Thibault [Mon, 17 Oct 2005 03:29:22 +0000 (20:29 -0700)]
[PATCH] SVGATextMode fix

Fix bug 5441.

I didn't know about messy programs like svgatextmode...  Couldn't this be
integrated in some linux/drivers/video/console/svgacon.c ?...  So because
of the existence of the svgatextmode program, the kernel is not supposed to
touch to CRT_OVERFLOW/SYNC_END/DISP/DISP_END/OFFSET ?

Disabling the check in vgacon_resize() might help indeed, but I'm really
not sure whether it will work for any chipset: in my patch, CRT registers
are set at each console switch, since stty rows/cols apply to consoles
separately...

The attached solution is to keep the test, but if it fails, we assume that
the caller knows what it does (i.e.  it is svgatextmode) and then disable
any further call to vgacon_doresize.  Svgatextmode is usually used to
_expand_ the display, not to shrink it.  And it is harmless in the case of
a too big stty rows/cols: the display will just be cropped.  I tested it on
my laptop, and it works fine with svgatextmode.

A better solution would be that svgatextmode explicitely tells the kernel
not to care about video timing, but for this an interface needs be defined
and svgatextmode be patched.

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] list: add missing rcu_dereference on first element
Herbert Xu [Mon, 17 Oct 2005 03:29:20 +0000 (20:29 -0700)]
[PATCH] list: add missing rcu_dereference on first element

It seems that all the list_*_rcu primitives are missing a memory barrier
on the very first dereference.  For example,

#define list_for_each_rcu(pos, head) \
for (pos = (head)->next; prefetch(pos->next), pos != (head); \
pos = rcu_dereference(pos->next))

It will go something like:

pos = (head)->next

prefetch(pos->next)

pos != (head)

do stuff

We're missing a barrier here.

pos = rcu_dereference(pos->next)

fetch pos->next

barrier given by rcu_dereference(pos->next)

store pos

Without the missing barrier, the pos->next value may turn out to be stale.
In fact, if "do stuff" were also dereferencing pos and relying on
list_for_each_rcu to provide the barrier then it may also break.

So here is a patch to make sure that we have a barrier for the first
element in the list.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years agoFix memory ordering bug in page reclaim
Linus Torvalds [Mon, 17 Oct 2005 00:36:06 +0000 (17:36 -0700)]
Fix memory ordering bug in page reclaim

As noticed by Nick Piggin, we need to make sure that we check the page
count before we check for PageDirty, since the dirty check is only valid
if the count implies that we're the only possible ones holding the page.

We always did do this, but the code needs a read-memory-barrier to make
sure that the orderign is also honored by the CPU.

(The writer side is ordered due to the atomic decrement and test on the
page count, see the discussion on linux-kernel)

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH]: highest_possible_processor_id() has to be a macro
Al Viro [Sun, 16 Oct 2005 07:17:33 +0000 (00:17 -0700)]
[PATCH]: highest_possible_processor_id() has to be a macro

... otherwise, things like alpha and sparc64 break and break
badly.  They define cpu_possible_map to something else in smp.h
*AFTER* having included cpumask.h.

If that puppy is a macro, expansion will happen at the actual
caller, when we'd already seen #define cpu_possible_map ... and we will
get the right thing used.

As an inline helper it will be tokenized before we get to that
define and that's it; no matter what we define later, it won't affect
anything.  We get modules with dependency on cpu_possible_map instead
of the right symbol (phys_cpu_present_map in case of sparc64), or outright
link errors if they are built-in.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[NETFILTER]: Fix ip6_table.c build with NETFILTER_DEBUG enabled.
Andrew Morton [Sat, 15 Oct 2005 23:15:38 +0000 (16:15 -0700)]
[NETFILTER]: Fix ip6_table.c build with NETFILTER_DEBUG enabled.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[PATCH] usbserial: Regression in USB generic serial driver
Randall Nortman [Sat, 15 Oct 2005 00:21:50 +0000 (17:21 -0700)]
[PATCH] usbserial: Regression in USB generic serial driver

Kernel version 2.6.13 introduced a regression in the generic USB
serial converter driver (usbserial.o, drivers/usb/serial/generic.c).
The bug manifests, as far as I can tell, whenever you attempt to write
to the device -- the write will never complete (write() returns 0, or
blocks).

Signed-off-by: Randall Nortman <oss@wonderclown.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Sat, 15 Oct 2005 00:17:04 +0000 (17:17 -0700)]
Merge /pub/scm/linux/kernel/git/davem/sparc-2.6

19 years agoMerge master.kernel.org:/home/rmk/linux-2.6-serial
Linus Torvalds [Sat, 15 Oct 2005 00:16:55 +0000 (17:16 -0700)]
Merge master.kernel.org:/home/rmk/linux-2.6-serial

19 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Sat, 15 Oct 2005 00:16:35 +0000 (17:16 -0700)]
Merge master.kernel.org:/home/rmk/linux-2.6-arm

19 years ago[PATCH] megaraid maintainers entry
Kolli, Neela Syam [Fri, 14 Oct 2005 22:59:13 +0000 (15:59 -0700)]
[PATCH] megaraid maintainers entry

I am taking over all Megaraid SCSI drivers.  Here is the patch for the
MAINTENERS file.

Signed-off-by: Neela Syam Kolli <Neela.Kolli@engenio.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] sh-sci.c sci_start_tx error
Yoshinori Sato [Fri, 14 Oct 2005 22:59:12 +0000 (15:59 -0700)]
[PATCH] sh-sci.c sci_start_tx error

Argument does not agree.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] nommu build error fix
Yoshinori Sato [Fri, 14 Oct 2005 22:59:11 +0000 (15:59 -0700)]
[PATCH] nommu build error fix

"proc_smaps_operations" is not defined in case of "CONFIG_MMU=n".

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] Dallas's 1-wire bus compile error
Evgeniy Polyakov [Fri, 14 Oct 2005 22:59:11 +0000 (15:59 -0700)]
[PATCH] Dallas's 1-wire bus compile error

drivers/built-in.o: In function `w1_alloc_dev': undefined reference to `netlink_kernel_create'
drivers/built-in.o: In function `w1_alloc_dev': undefined reference to `sock_release'

Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] aacraid: host_lock not released fix
Mark Haverkamp [Fri, 14 Oct 2005 22:59:10 +0000 (15:59 -0700)]
[PATCH] aacraid: host_lock not released fix

While doing some testing of error cases I ran into this bug.  In some cases
the reset handler can exit with the host_lock still held.

Signed-off-by: Mark Haverkamp <markh@osdl.org>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc64: Fix G5 model in /proc/cpuinfo
Benjamin Herrenschmidt [Fri, 14 Oct 2005 22:59:09 +0000 (15:59 -0700)]
[PATCH] ppc64: Fix G5 model in /proc/cpuinfo

Andreas Schwab spotted that recent kernels broke reporting of the PowerMac
machine model in /proc/cpuinfo.  This fixes it.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] m32r: Fix smp.c for preempt kernel
Hirokazu Takata [Fri, 14 Oct 2005 22:59:07 +0000 (15:59 -0700)]
[PATCH] m32r: Fix smp.c for preempt kernel

This patch fixes the following BUG message of arch/m32r/smp.c for
CONFIG_DEBUG_PREEMPT:

BUG: using smp_processor_id() in preemptible

This message is displayed by an smp_processor_id() execution during
kernel's preemptible-state.

Signed-off-by: Hitoshi Yamamoto <hitoshiy@isl.melco.co.jp>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] wireless/airo: Build fix
Matteo Croce [Fri, 14 Oct 2005 22:59:06 +0000 (15:59 -0700)]
[PATCH] wireless/airo: Build fix

The aironet PCI driver has a build dependency on ISA that prevent the
driver to compile on systems that doesn't support ISA, like x86_64.  The
driver really doesn't depend on ISA, it does some ISA stuff in the
initialization code, since the driver supports both ISA and PCI cards.  So
the driver should depend on ISA_DMA_API to build on all systems, and this
will not hurt PCI at all.

Signed-off-by: Matteo Croce <3297627799@wind.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] Fix copy-and-paste error in BSD accounting
Tim Schmielau [Fri, 14 Oct 2005 22:59:05 +0000 (15:59 -0700)]
[PATCH] Fix copy-and-paste error in BSD accounting

Fix copy and paste error in jiffies_to_AHZ conversion which leads to wrong
BSD accounting information on alpha and ia64 when
CONFIG_BSD_PROCESS_ACCT_V3 is turned on.

Also update comment to match reorganised header files.

Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] radio-cadet: check request_region() return value correctly
Alexey Dobriyan [Fri, 14 Oct 2005 22:59:04 +0000 (15:59 -0700)]
[PATCH] radio-cadet: check request_region() return value correctly

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] Add missing export of getnstimeofday()
Takashi Iwai [Fri, 14 Oct 2005 22:59:03 +0000 (15:59 -0700)]
[PATCH] Add missing export of getnstimeofday()

Adds the missing EXPORT_SYMBOL_GPL for getnstimeofday() when
CONFIG_TIME_INTERPOLATION isn't set.  Needed by drivers/char/mmtimer.c

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] zaurus: fix dependencies on collie keyboard
Pavel Machek [Fri, 14 Oct 2005 22:59:03 +0000 (15:59 -0700)]
[PATCH] zaurus: fix dependencies on collie keyboard

This fixes depenencies of collie keyboard.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] zaurus: fix soc_common.c
Pavel Machek [Fri, 14 Oct 2005 22:59:02 +0000 (15:59 -0700)]
[PATCH] zaurus: fix soc_common.c

This fixes wrong comments, non-working debug subsystem, and some
potentially dangerous macros.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] zaurus: fix compilation with cpufreq disabled
Pavel Machek [Fri, 14 Oct 2005 22:59:01 +0000 (15:59 -0700)]
[PATCH] zaurus: fix compilation with cpufreq disabled

This fixes compilation with CPU_FREQ disabled.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] mips: fix build error in TANBAC TB0226
Yoichi Yuasa [Fri, 14 Oct 2005 22:59:00 +0000 (15:59 -0700)]
[PATCH] mips: fix build error in TANBAC TB0226

arch/mips/pci/fixup-tb0226.c: In function `pcibios_map_irq':
arch/mips/pci/fixup-tb0226.c:31: warning: implicit declaration of function `vr41xx_set_irq_trigger'
arch/mips/pci/fixup-tb0226.c:32: error: `TRIGGER_LEVEL' undeclared (first use in this function)
arch/mips/pci/fixup-tb0226.c:32: error: (Each undeclared identifier is reported only once
arch/mips/pci/fixup-tb0226.c:32: error: for each function it appears in.)
arch/mips/pci/fixup-tb0226.c:33: error: `SIGNAL_THROUGH' undeclared (first use in this function)
arch/mips/pci/fixup-tb0226.c:34: warning: implicit declaration of function `vr41xx_set_irq_level'
arch/mips/pci/fixup-tb0226.c:34: error: `LEVEL_LOW' undeclared (first use in this function)

Signed-off-by: Yoichi Yuasa <yuasa@hh.iij4u.or.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[SPARC64]: Fix powering off on SMP.
David S. Miller [Fri, 14 Oct 2005 22:26:08 +0000 (15:26 -0700)]
[SPARC64]: Fix powering off on SMP.

Doing a "SUNW,stop-self" firmware call on the other cpus is not the
correct thing to do when dropping into the firmware for a halt,
reboot, or power-off.

For now, just do nothing to quiet the other cpus, as the system should
be quiescent enough.  Later we may decide to implement smp_send_stop()
like the other SMP platforms do.

Based upon a report from Christopher Zimmermann.

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[QLOGICPTI]: Handle INQUIRY response sniffing correctly.
David S. Miller [Fri, 14 Oct 2005 20:44:32 +0000 (13:44 -0700)]
[QLOGICPTI]: Handle INQUIRY response sniffing correctly.

These days, in 2.6.x, even INQUIRY commands are sent using
scatter gather lists.

Bug reported by Tom 'spot' Callaway.

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[ARM] 3014/1: Spitz keyboard: Correct the right shift key
Richard Purdie [Fri, 14 Oct 2005 15:07:28 +0000 (16:07 +0100)]
[ARM] 3014/1: Spitz keyboard: Correct the right shift key

Patch from Richard Purdie

Correct the right shift key entry in the spitz keyboard driver.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[ARM] 3013/1: Spitz: Fix compile errors
Richard Purdie [Fri, 14 Oct 2005 15:07:27 +0000 (16:07 +0100)]
[ARM] 3013/1: Spitz: Fix compile errors

Patch from Richard Purdie

Remove a couple of lines of accidently added code causing compile
errors.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[ARM] 3012/1: Corgi/Spitz LCD: Use bus_find_device to locate pxafb - fix compile...
Richard Purdie [Fri, 14 Oct 2005 15:07:26 +0000 (16:07 +0100)]
[ARM] 3012/1: Corgi/Spitz LCD: Use bus_find_device to locate pxafb - fix compile error

Patch from Richard Purdie

Update corgi_lcd to use bus_find_device to locate the pxafb device
hence fixing a compile error.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[ARM] 3011/1: pxafb: Add ability to set device parent + fix spitz compile error
Richard Purdie [Fri, 14 Oct 2005 15:07:25 +0000 (16:07 +0100)]
[ARM] 3011/1: pxafb: Add ability to set device parent + fix spitz compile error

Patch from Richard Purdie

Add a function to allow machines to set the parent of the pxa
framebuffer device. This means the power up/down sequence can be
controlled where required by the machine.

Update spitz to use the new function, fixing a compile error.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[SERIAL] Add SupraExpress 336i Sp ASVD modem ID
Baris Cicek [Fri, 14 Oct 2005 13:32:40 +0000 (14:32 +0100)]
[SERIAL] Add SupraExpress 336i Sp ASVD modem ID

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[ARM] 2980/1: Fix L7200 core.c compile
Deepak Saxena [Fri, 14 Oct 2005 11:49:15 +0000 (12:49 +0100)]
[ARM] 2980/1: Fix L7200 core.c compile

Patch from Deepak Saxena

This patch fixes L7200 so that it builds in 2.6.latest. I do not
have the hardware so don't know if it actually still works, but
the changes are fairly trivial. I am not even sure if anyone
still maintains, uses, or cares about this machine type.

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[ARM] 3009/1: S3C2410 - io.h offsets too large for LDRH/STRH
Ben Dooks [Fri, 14 Oct 2005 11:24:24 +0000 (12:24 +0100)]
[ARM] 3009/1: S3C2410 - io.h offsets too large for LDRH/STRH

Patch from Ben Dooks

The __inwc/__outwc calls are capable of creating
LDRH and STRH instructions with offsets over 8bits
as GCC does not have a constraint for an 8bit
offset.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[SPARC64]: Eliminate PCI IOMMU dma mapping size limit.
David S. Miller [Fri, 14 Oct 2005 05:15:24 +0000 (22:15 -0700)]
[SPARC64]: Eliminate PCI IOMMU dma mapping size limit.

The hairy fast allocator in the sparc64 PCI IOMMU code
has a hard limit of 256 pages.  Certain devices can
exceed this when performing very large I/Os.

So replace with a more simple allocator, based largely
upon the arch/ppc64/kernel/iommu.c code.

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[SPARC64]: Consolidate common PCI IOMMU init code.
David S. Miller [Fri, 14 Oct 2005 04:10:08 +0000 (21:10 -0700)]
[SPARC64]: Consolidate common PCI IOMMU init code.

All the PCI controller drivers were doing the same thing
setting up the IOMMU software state, put it all in one spot.

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years agoMerge branch 'master'
Jeff Garzik [Fri, 14 Oct 2005 01:22:27 +0000 (21:22 -0400)]
Merge branch 'master'

19 years agoMerge branch 'release' of master.kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6
Linus Torvalds [Thu, 13 Oct 2005 23:10:54 +0000 (16:10 -0700)]
Merge branch 'release' of /linux/kernel/git/aegl/linux-2.6

19 years ago[TCP]: Ratelimit debugging warning.
Herbert Xu [Thu, 13 Oct 2005 21:42:24 +0000 (14:42 -0700)]
[TCP]: Ratelimit debugging warning.

Better safe than sorry.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[CONNECTOR]: Update documentation to match reality.
Evgeniy Polyakov [Thu, 13 Oct 2005 21:42:04 +0000 (14:42 -0700)]
[CONNECTOR]: Update documentation to match reality.

Updated documentation to reflect 2.6.14 netlink changes
about socket options, multicasting and group number.
Please concider for 2.6.14.

Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[NET]: Disable NET_SCH_CLK_CPU for SMP x86 hosts
Andi Kleen [Thu, 13 Oct 2005 21:41:44 +0000 (14:41 -0700)]
[NET]: Disable NET_SCH_CLK_CPU for SMP x86 hosts

Opterons with frequency scaling have fully unsynchronized TSCs
running at different frequencies, so using TSCs there is not a good idea.
Also some other x86 boxes have this problem. gettimeofday should be good
enough, so just disable it.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[NETFILTER]: Fix OOPSes on machines with discontiguous cpu numbering.
David S. Miller [Thu, 13 Oct 2005 21:41:23 +0000 (14:41 -0700)]
[NETFILTER]: Fix OOPSes on machines with discontiguous cpu numbering.

Original patch by Harald Welte, with feedback from Herbert Xu
and testing by Sébastien Bernard.

EBTABLES, ARP tables, and IP/IP6 tables all assume that cpus
are numbered linearly.  That is not necessarily true.

This patch fixes that up by calculating the largest possible
cpu number, and allocating enough per-cpu structure space given
that.

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[ARM] 3008/1: the exception table is not read-only
Nicolas Pitre [Thu, 13 Oct 2005 21:04:37 +0000 (22:04 +0100)]
[ARM] 3008/1: the exception table is not read-only

Patch from Nicolas Pitre

... and therefore should not live in the .text section.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[ARM] 3007/1: BAST - add CONFIG_ISA to build
Ben Dooks [Thu, 13 Oct 2005 21:04:36 +0000 (22:04 +0100)]
[ARM] 3007/1: BAST - add CONFIG_ISA to build

Patch from Ben Dooks

The Simtec EB2410ITX (BAST) has a PC/104 slot, and
therefore we should enable CONFIG_ISA to allow the
drivers for ISA peripherals to be selected

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Thu, 13 Oct 2005 16:59:32 +0000 (09:59 -0700)]
Merge master.kernel.org:/home/rmk/linux-2.6-arm

19 years ago[ARM] 3006/1: S3C2410 - arch/arm/mach-s3c2410 sparse fixes
Ben Dooks [Thu, 13 Oct 2005 15:46:35 +0000 (16:46 +0100)]
[ARM] 3006/1: S3C2410 - arch/arm/mach-s3c2410 sparse fixes

Patch from Ben Dooks

Remove an unused variable from s3c2410.c and
ensure that items not needed to be exported from
s3c2440.c are declared static.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years ago[ARM] 3005/1: S3C2440 - add definition for s3c2440_set_dsc() call in hardware.h
Ben Dooks [Thu, 13 Oct 2005 15:46:35 +0000 (16:46 +0100)]
[ARM] 3005/1: S3C2440 - add definition for s3c2440_set_dsc() call in hardware.h

Patch from Ben Dooks

include/asm-arm/arch-s3c2410/hardware.h was missing
the definition for s3c2440_set_dsc()

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
19 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Thu, 13 Oct 2005 02:08:10 +0000 (19:08 -0700)]
Merge /pub/scm/linux/kernel/git/davem/sparc-2.6

19 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Thu, 13 Oct 2005 02:07:59 +0000 (19:07 -0700)]
Merge /pub/scm/linux/kernel/git/davem/net-2.6

19 years agoMerge branch 'upstream-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik...
Linus Torvalds [Thu, 13 Oct 2005 02:07:38 +0000 (19:07 -0700)]
Merge branch 'upstream-fixes' of /linux/kernel/git/jgarzik/libata-dev

19 years agoMerge branch 'upstream-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik...
Linus Torvalds [Thu, 13 Oct 2005 02:07:19 +0000 (19:07 -0700)]
Merge branch 'upstream-fixes' of /linux/kernel/git/jgarzik/netdev-2.6

19 years ago[TCP]: Add code to help track down "BUG at net/ipv4/tcp_output.c:438!"
Herbert Xu [Wed, 12 Oct 2005 22:59:39 +0000 (15:59 -0700)]
[TCP]: Add code to help track down "BUG at net/ipv4/tcp_output.c:438!"

This is the second report of this bug.  Unfortunately the first
reporter hasn't been able to reproduce it since to provide more
debugging info.

So let's apply this patch for 2.6.14 to

1) Make this non-fatal.
2) Provide the info we need to track it down.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[NETPOLL]: wrong return for null netpoll_poll_lock()
Ben Dooks [Wed, 12 Oct 2005 22:12:21 +0000 (15:12 -0700)]
[NETPOLL]: wrong return for null netpoll_poll_lock()

When netpoll is not being used, the macro that
defines the removed routing netpoll_poll_lock
defines the return as zero, but the real
routine returns a `void *`

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[BRIDGE]: fix race on bridge del if
Stephen Hemminger [Wed, 12 Oct 2005 22:10:01 +0000 (15:10 -0700)]
[BRIDGE]: fix race on bridge del if

This fixes the RCU race on bridge delete interface.  Basically,
the network device has to be detached from the bridge in the first
step (pre-RCU), rather than later. At that point, no more bridge traffic
will come in, and the other code will not think that network device
is part of a bridge.

This should also fix the XEN test problems.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>