Staging: ipack: check the device ID space CRC.

We check the CRC and store the result of the check in struct ipac_device.
A warning is emitted if the check fails.  However we leave it to the
IPack module device to refuse to initialize due to a bad CRC.  I have seen
otherwise good modules with bad CRCs.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack: reset previous timeouts during device registration.

Resetting the previous timeout we avoid to read the timeout status register
and see timeout errors that don't correspond to the present state of the
device.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack: Switch to 8MHz operation before reading ID.

Reading the ID space at 8 MHz is always supported.  Most carriers will
boot up in 8MHz mode.  Still, play it safe and ensure we are operating at
8Mhz.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/bridges/tpci200: remove struct list_head

As the linked list was removed before, delete the useless struct list_head

Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack: remove field driver from struct ipack_device.

After a successful match is found the driver field in struct device is
set by the core device code. We can use this field.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack: Choose the optimum bus speed by default.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack: Obtain supported speeds from ID ROM.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/bridges/tpci200: provide new callbacks to tpci200

Provide get_clockrate, set_clockrate, get_error, get_timeout and reset_timeout
callbacks.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack: Provide several carrier callbacks.

We provide callbacks to:
 - set/get the clockrate a module is accessed at,
 - get the error state of a slot,
 - get/reset the timeout state of a slot.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/bridges/tpci200: Put the TPCI200 control registers into a struct.

This saves us from a little pointer arithmetic and cleans up the code a bit.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: improve conf data handling and initialization

While registering the thermal zone, it is required to have the cooling
devices already setup, so that the .bind callback can succeed.

Due to that, the driver code needs to be reorganized so that we first
setup the cooling devices then the zones. This way we cope with the
right thermal framework initialization sequence.

This patch changes the order of the thermal zone initialization,
so that we create it only when the cooling devices are available.
It also adds some defensive checks for the config data, so that
the callbacks are ready for calls when the data is still not
initialized.

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: fix polling period settings

While registering the omap thermal zones we need to
properly specify TC1 and TC2, as long as the proper
passive polling period and monitor period.

This patch fixes the parameters passed while registering
the thermal zone.

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: remove checkpatch.pl warnings on data files

Simple checkpatch.pl clean ups.

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: Correct checkpatch.pl warnings

Removes checkpatch warnings on omap-bandgap.c.

Signed-off-by: J Keerthy <j-keerthy@ti.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: fix brace coding style issues

Fix coding style issues by removing unnecessary braces.

Signed-off-by: Güngör Erseymen <gelurine@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: remove unnecessary comments

Remove some obvious comments.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: remove extra i8253_cascade_ns_to_timer_2div()

The comedi core always calls the 'do_cmdtest' function before it
calls the 'do_cmd' function. The 'do_cmdtest' for this driver calls
i8253_cascade_ns_to_timer_2div() to validate the cmd->convert_arg.
This call sets the dev_private 'div1' and 'div2' values needed to
program the 8254 timer. There is no need to call the i8253 function
a second time in the do_cmd function.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: use cfc_check_trigger_is_unique

Use the helper function cfc_check_trigger_is_unique.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_fc: introduce cfc_check_trigger_is_unique

"Step 2" of each do_cmdtest checks that the trigger sources are
unique by doing something like this for each trigger:

if (cmd->start_src != TRIG_TIMER &&
    cmd->start_src != TRIG_FOLLOW &&
    cmd->start_src != TRIG_EXT)
err++;
/* Test the remaining triggers similarly */

if (err)
return 2;

Introduce a helper function in comedi_fc to handle this boilerplate.
The drivers can then just do:

err |= cfc_check_trigger_is_unique(cmd->start_src);
/* Test the remaining triggers similarly */

if (err)
return 2;

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: single source triggers are unique

If a single source trigger passes "step 1" of the do_cmdtest function
they are already unique. There is no need to recheck them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: use cfc_check_trigger_src

Remove the pci9111_check_trigger_src macro and use the helper
function cfc_check_trigger_src instead.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_fc: introduce cfc_check_trigger_src

All of the comedi drivers that support the 'cmd' callback also
require a 'do_cmdtest' callback. The do_cmdtest validates the
comedi_cmd before it is executed.

"Step 1" of each do_cmdtest does a trivial validation of the
trigger sources by doing something like this for each trigger:

int err = 0;
unsigned int tmp;

tmp = cmd->start_src;
src &= TRIG_NOW;
if (!src || tmp != src)
err++;
/* Test the remaining triggers similarly */

if (err)
return 1;

Introduce a helper function in comedi_fc to handle this boilerplate.
The drivers can then just do:

err |= cfc_check_trigger_src(&cmd->start_src, TRIG_NOW);
/* Test the remaining triggers similarly */

if (err)
return 1;

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/gdm72xx: remove camel-case vars in gdm_qos

Remove camel-case variables in gdm_qos.h and gdm_qos.c

Signed-off-by: Macpaul Lin <macpaul@gmail.com>
Cc: Paul Stewart <pstew@chromium.org>
Cc: Ben Chan <benchan@chromium.org>
Cc: Sage Ahn <syahn@gctsemi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: tidspbridge: Prepare for irqs.h removal

Let's define some things locally to avoid breaking build
when irqs.h is removed.

This is needed for the ARM common zImage support.

Cc: Omar Ramirez Luna <omar.ramirez@ti.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: "wlags49_h2" Fix typos.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: remove unnecessary 'is_valid'

The 'is_valid' variable in the private data is only used in the
detach of the board to determine if the pci9111_reset() function
can be called. That function only requires a valid dev->iobase
to work. Use that for the check instead and remove the unneeded
variable from the private data.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: cleanup timer_divisor_[12]

For aesthetic reasons, rename the symbols.

Remove the unnecessary () around the symbols in the calls to
i8253_cascade_ns_to_timer_2div().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: cleanup pci9111_hr_ai_range

For aesthetic reasons, rename the symbol and fix the whitespace.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: cleanup the io register map

Finish renaming the defines for the register map. Move the bit
defines so that they are associated with the register. Remove
the unneeded '0' bit defines.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: change pci9111_fifo_reset into a function

This macro relies on a local variable having a specific name.
It's used multiple places so change it into a function.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: remove pci9111_trigger_and_autoscan_[sg]et macros

These macros rely on a local variable having a specific name.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: remove pci9111_interrupt_and_fifo_[sg]et macros

These macros rely on a local variable having a specific name.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: remove pci9111_interrupt_clear macro

This macro relies on a local variable having a specific name.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: remove pci9111_software_trigger macro

This macro relies on a local variable having a specific name.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: remove pci9111_is_fifo_* macros

These macros rely on a local variable having a specific name.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: remove pci9111_ai_channel_[gs]et macros

These macros rely on a local variable having a specific name.

The comedi code makes sure the channel number is valid so the mask
of PCI9111_CHANNEL_MASK can be remove.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: remove pci9111_ai_range_[gs]et macros

These macros rely on a local variable having a specific name.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: use local variables for the chan/range

Simplify the chan/range in pci9111_ai_insn_read() by using local
variables for hold the values and by just passing insn->chanspec
to the CR_* macros instead of using (&insn->chanspec)[0].

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: remove INTERRUPT_DEBUG code

This debug output should be removed in the final driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: remove AI_DO_CMD_DEBUG code

This debug output should be removed in the final driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: use attach_pci callback

Convert this PCI driver to use the comedi PCI auto config attach
mechanism by adding an 'attach_pci' callback function. Since the
driver does not require any external configuration options, and
the legacy 'attach' callback is now optional, remove it. The
boardinfo is also not needed now so remove it also.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: remove the io_range values from the private data

These values are not used by the driver. Remove them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: remove the board attach noise

Remove the kernel messages about the io base/range for the pci
resources.

Move the board attach messages to the end of the attach and use
a simple/clean dev_info message for it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: analog input subdevice is fixed

The analog input subdevice is the same for all boards supported by
this driver. Remove the boardinfo just open-code the values in the
attach function.

Note: the only other board that could be supported by this driver is
the ADLink PCI-9111DG board. This board has 12-bit analog inputs
instead of the 16-bit inputs of the PCI-9111HR board. Unfortunately
these boards share the same PCI vendor/device id.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: remove 'single' channel list check

The comedi core verifies that the chanlist elements are inrange for
the subdevice. Remove the redundant check in thie driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: remove chanlist_len checks

The chanlist_len is validated by the comedi core before calling
the do_cmdtest function. Remove these redundant checks.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: digital input/output subdevices are fixed

The digital input and output subdevices are the same for all boards
supported by this driver. Remove the defines just open-code the values
in the attach function.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: analog output subdevice is fixed

The analog output subdevice is the same for all boards supported
by this driver. Remove the boardinfo for it and just open-code
the values in the attach function.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: cleanup ai read in pci9111_ai_insn_read()

The shift, maxdata, and invert values, used to handle the 12-/16-bit
analog input differences, can be calculated based on the subdevice
maxdata value.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: remove pci9111_{hr_, )ai* macros

These macros rely on a local variable having a specific name.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: cleanup pci9111_ai_munge()

The shift, maxdata, and invert values, used to handle the 12-/16-bit
analog input differences, can be calculated based on the subdevice
maxdata value.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: remove AI_INSN_DEBUG code

This debug output should be removed in the final driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: cleanup pci9111_ao_insn_write()

Remove the unnecessary comment.

Only the last data value written needs to be cached for
readback.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: cleanup ao resolution

The 'ao_resolution' in the boardinfo is not used. Remove it.

Rename the 'ao_resolution_mask' to 'ao_maxdata', this information
is copied to the ao subdevice 'maxdata'.

Remove the PCI9111_AO_RESOLUTION* defines and just open-code the
maxdata in the boardinfo.

Remove the mask of the output data in pci9111_ao_insn_write(),
the comedi core insures that the data is valid.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: cleanup pci9111_ao_insn_read()

Remove the unnecessary comments.

The readback value does not need to be masked.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: remove pci9111_ao_set_data macro

This macro relies on a local variable having a specific name.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: cleanup pci9111_do_insn_bits()

Remove the unnecessary comments.

Cleanup the function to follow the comedi standard for digital
outputs. The 'mask' does not need to be checked, the comedi core
will make sure that it is valid based on the subdevice data.
The outputs only need to be updated if the 'mask' indicates
something is changing, otherwise we just need to return the
current "state" of the outputs.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: cleanup pci9111_di_insn_bits()

Remove the unnecessary comments and remove the unneeded local variable.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: remove pci9111_d[io]_* i/o macros

These macros rely on a local variable having a specific name.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: use 8253 helper functions

The timer on this board is a standard 8254 compatible counter/timer.
Instead of open-coding the 8254 timer io, use the helper functions
provided by 8253.h.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: remove pci9111_8254_* i/o macros

These macros rely on a local variable having a specific name.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: remove PCI9111_IO_BASE macro

This macro relies on a local variable having a specific name.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: remove pci9111_board_nbr macro

This macro is an open-coded version of the kernels ARRAY_SIZE
macro. Use the kernel provided macro instead.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: remove dev_private macro

This macro relies on a local variable having a specific name.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: drm/omap: hold a ref to the bo while waiting for flip

Since the plane hasn't yet taken a reference, we need to hold a
reference while waiting to ensure the backing GEM bo doesn't get
freed from under us.

Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-for-3.7c' of git://git./linux/kernel/git/jic23/iio into work-next

Third set of IIO rework and new drivers for the 3.7 cycle.

This set includes:

1) HID sensor drivers. This includes a core elements in the
HID subsystem merged through the IIO tree because we have some
ABI changes outstanding (some in this set) which will effect them.
The HID sensors specification covers an extremely wide range of
sensors so we will probably be seeing lots more elements of this
as the hardware hits the market.

2) Some general abi cleanups to use the utility function
iio_push_to_buffer and to drop the used timestamp parameter
from the same call.  For a long time timestamps have taken
the same path as all other channel types into the buffers so
it is good to clean this out.

3) More ADC driver support for Analog Devices parts in the form
of one new driver and some additional supported parts via current
drivers.

4) An increase to the accuracy of the calibration scale for
the isl29018 driver.

So a mixed bag, but all good additions to IIO.

staging: xgifb: delete redundant casts

Delete some redundant casts.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: use correct type for VBVCLKData

Use correct type to eliminate casting.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: delete ISXPDOS

Delete unneeded flag.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: mark constant data with const

Mark some data tables as const.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: access static data tables directly

Access some data tables directly instead of using pointers.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: use "else if"

Use "else if" when possible to reduce nesting.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: delete XGI_LCDDataTablStruct

Delete an unused structure.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: delete LCDLenList

LCDLenList is redundant. It's only used for modifying a write-only stack
variable. Delete also related #defines.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: XGI_GetLcdPtr: delete dead code

Only table values 0..5 are ever used.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: delete Chrontel 7017 LCD data

Delete unused Chrontel 7017 LCD data.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: use a real pointer for TV DATAPTR

Replace DATAPTR numbers with a real pointer to make code simpler.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: use proper typing for TV data

There's a dangerous cast from XGI330_TVDataStruct to SiS_TVData. Use
SiS_TVData everywhere, also the data can be made const.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: delete Chrontel TV data

Delete unused Chrontel TV data.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: XGI_GetTVPtr: drop the table parameter

Only one TV data table is used by the driver, delete unneeded complexity.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: avoid copy-pasting LCD data

Share the common data tables instead of having the same data in multiple
tables.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: delete redundant chip type check

All chip type values are covered by (chip >= XG20 || chip >= XG40).

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: delete some unused #defines

Delete some unused #defines.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: delete IF_DEF_LCDA

IF_DEF_LCDA is always true.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: delete IF_DEF_ExpLink

Delete a flag which is never set.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: replace XGI_XG21SetPanelDelay() with mdelay()

Eliminate a trivial wrapper function.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: document some LVDS data delay values

Document some delay values based on the comments in
XGI_XG21SetPanelDelay().

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: silicom: Header-cleanup

Staging: silicom: Header cleanup of WD_STEP_COUNT_GET

Signed-off-by: Daniel Cotey <puff65537@bansheeslibrary.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:wlan-ng: clean some more functions

the function p80211netdev_rx doesnt' need a return at the end
and also remove some new lines

the function p80211knetdev_set_mac_address doesn't need the result
variable assigned as it gets a return from p80211req_dorequest function

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:wlan-ng: clean register_wlandev function

we dont need i to just return the status of register_netdev

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:wlan-ng: cleanup prism2sta_commsqual_defer and hfa384x_drvr_getconfig

the function prism2sta_commsqual_defer defines a goto done lable, which just
jumps to end of function, which we can achieve with out it

the hfa384x_drvr_getconfig doesn't need the result variable, we can
remove and just return the function

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:wlan-ng: cleanup p80211skb_free and p80211skb_rxmeta_detach

these functions doesn't need return at the end of the function

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:wlan-ng: clean coding style problems in p80211req_mibset_mibget

clean this function to follow kernel coding way

remove double tabs
remove spaces

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:wlan-ng: p80211req_mibset_mibget should be void

this function always returning 0, there are no callers that checks
the return of this function, make this function return void

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:wlan-ng: clean p80211req_handlemsg

the switch case doesn't have a break statement of DIDmsg_dot11req_mibget,
and DIDmsg_dot11req_mibset cases, and also cleanup the code to follow
the kernel coding way

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:wlan-ng: remove default case in the p80211req_handlemsg

default is redundant and remove it

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:wlan-ng: cleanup hfa384x_ctlxout_callback

goto done is not required and actually having goto done does
jumps the program to end of the function and calls return.
instead call return directly

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:wlan-ng: cleanup hfa384x_usbctlx_resptimerfn

goto done is not required and simple return is fine

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:wlan-ng: fix sparse warnings

drivers/staging/wlan-ng/prism2fw.c:240:5: warning: symbol 'prism2_fwapply' was not declared. Should it be static?
drivers/staging/wlan-ng/prism2fw.c:379:5: warning: symbol 'crcimage' was not declared. Should it be static?
drivers/staging/wlan-ng/prism2fw.c:443:6: warning: symbol 'free_chunks' was not declared. Should it be static?
drivers/staging/wlan-ng/prism2fw.c:465:6: warning: symbol 'free_srecs' was not declared. Should it be static?
drivers/staging/wlan-ng/prism2fw.c:492:5: warning: symbol 'mkimage' was not declared. Should it be static?
drivers/staging/wlan-ng/prism2fw.c:585:5: warning: symbol 'mkpdrlist' was not declared. Should it be static?
drivers/staging/wlan-ng/prism2fw.c:659:5: warning: symbol 'plugimage' was not declared. Should it be static?
drivers/staging/wlan-ng/prism2fw.c:767:5: warning: symbol 'read_cardpda' was not declared. Should it be static?
drivers/staging/wlan-ng/prism2fw.c:857:5: warning: symbol 'read_fwfile' was not declared. Should it be static?
drivers/staging/wlan-ng/prism2fw.c:981:5: warning: symbol 'writeimage' was not declared. Should it be static?
drivers/staging/wlan-ng/prism2fw.c:1133:5: warning: symbol 'validate_identity' was not declared. Should it be static?

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:wlan-ng: slove sparse warnings

drivers/staging/wlan-ng/prism2fw.c:127:18: warning: symbol 's3data' was not declared. Should it be static?
drivers/staging/wlan-ng/prism2fw.c:130:14: warning: symbol 'ns3plug' was not declared. Should it be static?
drivers/staging/wlan-ng/prism2fw.c:131:18: warning: symbol 's3plug' was not declared. Should it be static?
drivers/staging/wlan-ng/prism2fw.c:134:14: warning: symbol 'ns3crc' was not declared. Should it be static?
drivers/staging/wlan-ng/prism2fw.c:135:17: warning: symbol 's3crc' was not declared. Should it be static?
drivers/staging/wlan-ng/prism2fw.c:138:14: warning: symbol 'ns3info' was not declared. Should it be static?
drivers/staging/wlan-ng/prism2fw.c:139:18: warning: symbol 's3info' was not declared. Should it be static?
drivers/staging/wlan-ng/prism2fw.c:142:5: warning: symbol 'startaddr' was not declared. Should it be static?
drivers/staging/wlan-ng/prism2fw.c:145:14: warning: symbol 'nfchunks' was not declared. Should it be static?
drivers/staging/wlan-ng/prism2fw.c:146:17: warning: symbol 'fchunk' was not declared. Should it be static?
drivers/staging/wlan-ng/prism2fw.c:154:12: warning: symbol 'pda' was not declared. Should it be static?
drivers/staging/wlan-ng/prism2fw.c:155:21: warning: symbol 'nicid' was not declared. Should it be static?
drivers/staging/wlan-ng/prism2fw.c:156:20: warning: symbol 'rfid' was not declared. Should it be static?
drivers/staging/wlan-ng/prism2fw.c:157:20: warning: symbol 'macid' was not declared. Should it be static?
drivers/staging/wlan-ng/prism2fw.c:158:20: warning: symbol 'priid' was not declared. Should it be static?

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>