staging/lustre/llite: glimpse the inode before doing fiemap

For a new inode, the i_size is 0 until a stat, which will yield
an empty fiemap result.
Fix the issue by glimpsing the size before doing fiemap.

Signed-off-by: Li Dongyang <dongyang.li@anu.edu.au>
Signed-off-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-on: http://review.whamcloud.com/13439
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6091
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/ptlrpc: fix import state during replay

Client doesn't restore import state correctly
on reconnect during replay. It resends lock replay
when final ping was queued by server.
Server fails with "target_queue_recovery_request())
ASSERTION( req->rq_export->exp_lock_replay_needed ) failed"

Add imp_replay_state to store last replay state.
imp_state is restored from imp_replay_state
during reconnect.

Signed-off-by: Andriy Skulysh <Andriy_Skulysh@xyratex.com>
Signed-off-by: Bob Glossman <bob.glossman@intel.com>
Xyratex-bug-id: MRP-2022
Reviewed-on: http://review.whamcloud.com/12163
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5651
Reviewed-by: Jian Yu <jian.yu@intel.com>
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/lov: don't crash accessing LOV object with FID{0, 0}

Some object maybe has a corrupted LOV EA or a hole in
LOV EA. We should not crash client in such case.

Signed-off-by: Fan Yong <fan.yong@intel.com>
Signed-off-by: Yang Sheng <yang.sheng@intel.com>
Reviewed-on: http://review.whamcloud.com/12740
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4958
Reviewed-by: Jian Yu <jian.yu@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/mgc: detach MGC dev on error

lustre_start_mgc() creates MGC device, if error happens later on
ll_fill_super(), this device is still attached, and later mount
fails by keep complaining that the MGC device's already in the
client node.

It turns out that the device was referenced by mgc config llog data
which is arranged in the mgc lock requeue thread re-trying to get its
mgc lock, and in normal case, this llog reference only released in
mgc_blocking_ast() when the system is umount.

This patch make mgc_precleanup() to wake up requeue thread to handle
the config llog data.

This patch also makes mgc_setup() wait for mgc_requeue_thread() start
before moving on.

Signed-off-by: Bobi Jam <bobijam.xu@intel.com>
Reviewed-on: http://review.whamcloud.com/11765
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4943
Reviewed-by: Ryan Haasken <haasken@cray.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/mgc: check the import stat for lprocfs

in lprocfs_mgc_rd_ir_state, the import state should be checked
the validity before doing further work.

Signed-off-by: Hongchao Zhang <hongchao.zhang@intel.com>
Reviewed-on: http://review.whamcloud.com/12896
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5650
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Niu Yawei <yawei.niu@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/ptlrpc: false alarm in AT network latency measuring

If early reply of client RPC is lost and client RPC is expired and
resent, server will drop the resent RPC because it's already in
processing, server may also send reply or early reply to client,
which can still match reply buffer of the original request.
In this case, client is measuring time from resent time, but server
is reporting service time of original RPC, which is longer than
the time measured by client.

Signed-off-by: Liang Zhen <liang.zhen@intel.com>
Reviewed-on: http://review.whamcloud.com/12855
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5545
Reviewed-by: Li Wei <wei.g.li@intel.com>
Reviewed-by: Johann Lombardi <johann.lombardi@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/mdc: Handle empty but non-zero acl xattr

We have found that posix_acl_access can have a value
of \002\000\000\000.  In that case body->aclsize is
non-zero, but the there are no actuall acls stored
in the xattr.

In mdc_unpack_acl(), it only checks IS_ERR() on the
pointer returned by posix_acl_from_xattr(), it does not
check for NULL.  Because of the above situation, the
xattr aclsize can be non-zero, but posic_acl_from_xattr()
still returns NULL.  Passing NULL to posix_acl_valid()
crashes the kernel.

We add a check to properly handle the NULL return value.

Signed-off-by: Christopher J. Morrone <morrone2@llnl.gov>
Reviewed-on: http://review.whamcloud.com/11989
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5150
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/osc: shorten IO calling path

By using osc_io_unplug_aync() for osc_queue_sync_pages() to shorten
the IO calling path, to reduce the chance of stack overflow.

Signed-off-by: Bobi Jam <bobijam.xu@intel.com>
Signed-off-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-on: http://review.whamcloud.com/11612
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3188
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Niu Yawei <yawei.niu@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ft1000-pcmcia: ft1000_hw.c: code refactoring: add ft1000_read_dsp_timer()

Add new function ft1000_read_dsp_timer() replacing recurring code block for
reading DSP timer. Such code refactoring solves all remaining "line over 80
characters" warnings reported by checkpatch.pl.

Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ft1000-pcmcia: ft1000_hw.c: fix style issues not requiring code refactoring

Fix all the trivial style issues (as reported by checkpatch.pl) not requiring
code refactoring. A following patch is expected to fix the remaining issues by
performing some code refactoring.

Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: panel: fix lcd type

the lcd type as defined in the Kconfig is not matching in the code.
as a result the rs, rw and en pins were getting interchanged.
Kconfig defines the value of PANEL_LCD to be 1 if we select custom
configuration but in the code LCD_TYPE_CUSTOM is defined as 5.

my hardware is LCD_TYPE_CUSTOM, but the pins were assigned to it
as pins of LCD_TYPE_OLD, and it was not working.
Now values are corrected with referenece to the values defined in
Kconfig and it is working.
checked on JHD204A lcd with LCD_TYPE_CUSTOM configuration.

Cc: <stable@vger.kernel.org> # 2.6.32+
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: sync: Fix memory corruption in sync_timeline_signal().

The android_fence_release() function checks for active sync points
by calling list_empty() on the list head embedded on the sync
point. However, it is only valid to use list_empty() on nodes that
have been initialized with INIT_LIST_HEAD() or list_del_init().

Because the list entry has likely been removed from the active list
by sync_timeline_signal(), there is a good chance that this
WARN_ON_ONCE() will be hit due to dangling pointers pointing at
freed memory (even though the sync drivers did nothing wrong)
and memory corruption will ensue as the list entry is removed for
a second time, corrupting the active list.

This problem can be reproduced quite easily with CONFIG_DEBUG_LIST=y
and fences with more than one sync point.

Signed-off-by: Alistair Strachan <alistair.strachan@imgtec.com>
Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Colin Cross <ccross@google.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: octeon: Remove extern from .c file

This patch fixes the checkpatch.pl warning:

WARNING: externs should be avoided in .c files
+extern void octeon_mdiobus_force_mod_depencency(void);

Signed-off-by: Helen Fornazier <helen.fornazier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: i2o: Remove indentation of labels

This patch fixes the checkpatche.pl warnings:

WARNING: labels should not be indented
+      context_remove:

WARNING: labels should not be indented
+      nop_msg:

WARNING: labels should not be indented
+      exit:

Signed-off-by: Helen Fornazier <helen.fornazier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: Remove do {} while(0) in single statement macro

This patch fixes the checkpatch.pl warning:

WARNING: Single statement macros should not use a do {} while (0) loop
+#define write_reg(par, ...)                                              \
+do {                                                                     \
+       par->fbtftops.write_register(par, NUMARGS(__VA_ARGS__), __VA_ARGS__); \
+} while (0)

Signed-off-by: Helen Fornazier <helen.fornazier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: Add space around '='

This patch fixes the checkpatch.pl error:

ERROR: spaces required around that '=' (ctx:VxV)
+                       sdev->bits_per_word=9;
                                           ^

Signed-off-by: Helen Fornazier <helen.fornazier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: iio: use the BIT macro in adc

This patch replaces bit shifting on:
0,1,2, and 3 with the BIT(x) macro.
Issue addressed by checkpatcg.pl.
This was done with the help of Coccinelle:

@r1@
identifier x;
constant int g;
@@

(
0<<\(x\|g\)
|
1<<\(x\|g\)
|
2<<\(x\|g\)
|
3<<\(x\|g\)
)

@script:python b@
g2 <<r1.g;
y;
@@
coccinelle.y = int(g2) + 1

@c@
constant int r1.g;
identifier b.y;
@@
(
-(1 << g)
+BIT(g)
|
-(0 << g)
+ 0
|
-(2 << g)
+BIT(y)
|
-(3 << g)
+(BIT(y)| BIT(g))
)

Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: iio: Add braces on all arms of if statement

The following patch adds braces on all arms of if statement.
Issue addressed by checkpatch.pl.

Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: iio: add blank line after function declaration

This patch adds blank line after function declaration.
Issue addressed by checkpatch.pl.

Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: iio: remove multible blank lines

This patch removes extra blank lines to address checkpatch.pl warnings
regarding that.

Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: iio: Adjust alignment for function parameters

This patch adjust parameters alignment in functions to match
open parenthesis. Issue addressed by checkpatch.pl.

Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192u: Fix space issues before '(' and after ')'

Space is required before the open and after the close parenthesis.
This patch adds space after 'if' and before '{'.

This was done with the help of the following Coccinelle script:

@r@
expression E;
position p1,p2,p3;
@@

if@p1 (E) @p3{@p2
        ...
}

@script:python@
p1 << r.p1;
p2 << r.p2;
p3 << r.p3;
@@

l1 = int (p1[0].line)
l2 = int (p2[0].line)
l3 = int (p3[0].line)
c1 = int (p1[0].column_end)
c2 = int (p2[0].column)
c3 = int (p3[0].column)
if (l1 != l2):
  cocci.include_match(False)
if (l2 == l3 and c3 + 2 == c2):
  cocci.include_match(False)

@@
position r.p1,r.p2,r.p3;
expression r.E;
@@

-if@p1 (E) @p3{@p2
+if (E) {
...
}

Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192u: Add space before open parenthesis

Space is required before the open parenthesis.
This patch adds space after if to address that issue.
This was done with the help of the following Coccinelle script:

@r@
position p1,p2;
@@
if@p1 (@p2 ...) {
        ...
}
@script:python@
p1 << r.p1;
p2 << r.p2;
@@

l1 = int (p1[0].line)
l2 = int (p2[0].line)
c1 = int (p1[0].column)
c2 = int (p2[0].column)
if (l2 == l1 and c1 + 2 != c2):
  cocci.include_match(False)

@@
position r.p1,r.p2;
@@
- if@p1 (
+ if (
...) {
        ...
}

Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: Remove extern from function declaration

Functions have the extern storage class specifier by default,
so this keyword can be removed.

Signed-off-by: Vatika Harlalka <vatikaharlalka@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8188eu: Add new variable to make code compact

Introducing this variable leads to overall more code
compactness and increases readability.

Signed-off-by: Vatika Harlalka <vatikaharlalka@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8188eu: Refactor repititive code to loop to increase compactness

Refactor repetitive code to loop so as to increase
compactness and introduce newlines for readability.

Signed-off-by: Vatika Harlalka <vatikaharlalka@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8188eu: Reduce line size to increase readability

Reduce line size to increase readability.

Signed-off-by: Vatika Harlalka <vatikaharlalka@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: Do not use binary constants

Gcc < 4.3 doesn't understand binary constants (0b*):

drivers/staging/fbtft/fbtft-sysfs.c:156:19: error: invalid suffix "b111" on integer constant
drivers/staging/fbtft/fb_hx8340bn.c:159:3: error: invalid suffix "b1111" on integer constant
drivers/staging/fbtft/fb_hx8340bn.c:159:11: error: invalid suffix "b1111" on integer constant
drivers/staging/fbtft/fb_hx8340bn.c:159:19: error: invalid suffix "b11111" on integer constant
drivers/staging/fbtft/fb_hx8340bn.c:159:28: error: invalid suffix "b1111" on integer constant
drivers/staging/fbtft/fb_hx8340bn.c:159:36: error: invalid suffix "b1111" on integer constant
drivers/staging/fbtft/fb_hx8340bn.c:159:44: error: invalid suffix "b1111" on integer constant
drivers/staging/fbtft/fb_hx8340bn.c:159:52: error: invalid suffix "b11111" on integer constant
drivers/staging/fbtft/fb_hx8340bn.c:160:3: error: invalid suffix "b111" on integer constant
...

Hence use hexadecimal constants (0x*) instead.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-for-4.1a' of git://git./linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First set of new drivers, cleanups and functionality for IIO in the 4.1 cycle.

New drivers
* CM3323 color sensor.
* MS5611 pressure and temperature sensor.

New functionality
* mup6050 - create mux clients for devices described via ACPI. The reasoning
     and approach taken in this patch are complex.  Basically there is no
     otherway of finding out what is there than by some esoteric look ups in
     the ACPI data.
* cm3232 - PM support
* itg3200 - suspend/resume support
* mcp320x - add more ADCs to the kconfig to reflect what the driver supports
     (this patch and the bindings got left behind when the support was added
      a while back).

Docs / utils
* ti-adc128s052 - DT bindings.
* mcp3422 - DT bindings.
* mcp320x - DT bindings
* ABI docs for event threshold scale attributes, in_magn_offset, proximity
  scan_element and thresh falling/rising values for accelerometers.  All
  elements long in use that have slipped by being explicitly documented.
* Tidy up the tools previously in drivers/staging/iio/Documentation and move
  them out to /tools/iio. Yet another move that should have happened long ago.
  This time Roberta Dobrescu did the leg work.  Thanks!

Core Cleanups
* Export userspace IIO headers.  We should have done the appropriate header
  splitting a long time ago. Thanks to Daniel for sorting this out.

* Refactor the registring of attributes for buffers to move all non-custom
  ones to a vector allowing easier additions to the current set in the future.

Driver Cleanups
* gpiod related cleanups.  Make use of the additional parameter to specify
   initial direciton to avoid extra code.
* bmc150 - Various refactorings to reduce code repitition and prepare for
           hardware buffer support.  Some of these cleanups are good even
   without the new functionality.
* kmx61 - direct use of index to an array avoiding a structure element which
          was always the index to an element in an array of that structure.
* vf610 - avoid incorrect type for return from wait_for_completion_timeout.
* gp2ap020a00f - use put_unaligned_le32 for slight code simplification.
* ade7754 - improve error handling including suppressing some build warnings.
* ade7759 - improve error handling including suppressing some build warnings.
* hmc5843 - Long line and indentation fixes. Also some constifying of various
      constant data.
* ade7854 - 80+ character line splitting.
* ad2s1210 - fix wrong printf format string.
* mxs-lradc - fix wrong printf format string.
* ade7954-i2c - code alignment fixes and other trivial but worthwhile bits.
* periodic rtc trigger - make the frequency type an unsigned int as it
  is always treated as such.
* jsa1212 - constify struct regmap_config as it is constant.
* ad7793 - typo in the MODULE_DESCRIPTION
* mma9551 - check gpiod_to_irq errors.  Note that this doesn't actually cause
    any trouble but is worth tidying up as obviously incorrect.
* mlx90614 - refactor the register symbols to make it clear which reads are to
    RAM not PROM.

dgnc: Clean up dgnc_sysfs.h

Remove redundant blank lines, move absolute include after relative
include.

Signed-off-by: Giedrius Statkevičius <giedrius.statkevicius@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dgnc: remove unused stuff from dgnc_cls.h

Remove unused defines from dgnc_cls.h

Signed-off-by: Giedrius Statkevičius <giedrius.statkevicius@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dgnc: remove old 2.4-2.6 compat kernel defines

dgnc_kcompat.h contains some old legacy defines in case the kernel
doesn't have __user defined but for current kernel versions these
defines don't make sense and are useless so remove them. Move the
TTY_FLIPBUF_SIZE define to digi.h because it's used in the code.

Signed-off-by: Giedrius Statkevičius <giedrius.statkevicius@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dgnc: use linux/types.h instead of dgnc_types.h

Dgnc_types.h unnecesarily defines TRUE as 1 and FALSE as 0 because we
already have a widely used linux/types.h so convert all TRUE to true,
FALSE to false and edit the dgnc_board struct to make sure it uses
"bool".

Signed-off-by: Giedrius Statkevičius <giedrius.statkevicius@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dgnc: get rid of dpacompat.h, move remaining stuff to digi.h

Dpacompat.h contained a lot of unused #defines and only few things are
used from it so since we've trimmed down digi.h, now we can delete
dpacompat.h and move remaining stuff into digi.h.

Signed-off-by: Giedrius Statkevičius <giedrius.statkevicius@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dgnc: clean up digi.h

Remove a lot of unused structs and defines from digi.h. We still have to
be careful with TIOCM_LE and TIOCMSET/TIOCMBIC because termios.h and
ioctls.h respectfully redefine them.

Signed-off-by: Giedrius Statkevičius <giedrius.statkevicius@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dgnc: remove unused dgnc_ioctl_name() command

dgnc_ioctl_name() is never used anywhere so remove it

Signed-off-by: Giedrius Statkevičius <giedrius.statkevicius@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: some off by one bugs

"dgnc_NumBoards" is the number of filled out elements in the
dgnc_Board[] array.  "->nasync" and "->maxports" are the same value.
They are the number of channels in the ->channels[] array so these tests
should be ">=" instead of ">" so we avoid reading past the end of the
arrays.

I cleaned up the conditions in dgnc_mgmt_ioctl() a bit.  There was a
work around for the off by one bug in the case where there were no
boards which is no longer needed.  "channel" is unsigned so it can't be
negative.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

stating: octeon-usb: cvmx_usb_initialize(): eliminate extra indentation

Eliminate extra indentation by putting all the code into the same block.
Also delete a bogus comment.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: try to recover from failed hardware reset

On some hardware the USB fails to initialize to sane state after
cold boot. We can detect this based on some unexpected interrupt bits,
and recover by re-initializing.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: fail and warn if DMA counters are wrong

Fail and WARN if DMA counters are wrong.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: move cvmx_usb_shutdown()

Move cvmx_usb_shutdown() to allow its use from some other functions.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: rewrite port reset

Don't disable port before resetting. Also perform reset unconditionally
when requested.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: move fifo setup to controller reset from port reset

Move FIFO setup to controller reset from port reset.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: move fifo setup into a separate routine

Move FIFO setup into a separate routine.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: use USB stack to turn on power

Use USB stack to turn on the power bit. It will also do
the necessary delays.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: don't poll interrupts early

Don't poll interrupts before we have registered the HCD.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: refactor usbn block init

Move one-time state data structure initialization out of
cvmx_usb_initialize().

This enables to re-initialize USBN HW block without messing
up data structures.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: never retry after xacterr

Never retry after xacterr. The DMA engine cannot handle that properly
and may result in wrong transfer count and hang.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: program DMA engine based on transfer direction

Program DMA engine based on transfer direction. We are only transferring
to one direction at a time.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: use __BITFIELD_FIELD

Use __BITFIELD_FIELD to define bitfields. OCTEON can at least in theory
run also in little-endian mode, so the bitfield definitions should not
assume big-endian byte order.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: delete redundant field from octeon_temp_buffer

Since we are not moving/realigning the original pointer returned
by kmalloc, we don't need to store the value in a separate field.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: remove useless prefix from pipe flags

Remove useless prefix from pipe flags and adjust comments.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: remove useless prefix from internal routines

Original CVMX code used "__" to distinguis internal USB functions
from public ones. But in Linux all cvmx_usb routines are internal
to this driver, so such separation is useless.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: eliminate 64-bit register access wrappers

Eliminate 64-bit register access wrappers. Since we don't implement
register-level debugging outputs, these are useless.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: remove internal function parameter sanity checks

Remove some function parameter sanity checks from internal functions
where we can rely them being called with sane parameters.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192u: Remove function prototype from .c file

Remove function prototype from r8192U_core.c since it is
declared in the r8192U.h header and this is included in r8192U_core.c

Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192u: Make function prototypes static

Make functions static since they are used locally and no other files
refer them.

Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: media: remove useless dev_info to avoid null ptr dereference

Context is used in dev_info after it has been freed.
This patch fix that issue by removing the dev_info itself,
for msg doesn't look much necessary.

Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8723au: Remove unused function rtw_atimdone_event_callback23a

This patch fixes the following sparse warning:

warning: symbol 'rtw_atimdone_event_callback23a' was not declared.
Should it be static?
rtw_atimdone_event_callback23a is local to the file rtw_mlme.c but
it isn't exposed in a header file anywhere. Moreover it is never called
from anywhere as well.

So, this patch removes this function completely.

Signed-off-by: Somya Anand <somyaanand214@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: wlan-ng: Remove typedef prism2sta_accesslist_t

Remove typedef prism2sta_accesslist_t and replace its uses
in the code.
Signed-off-by: Vatika Harlalka <vatikaharlalka@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Do not byteswap timeout twice

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: update_txdesc(): bagg_pkt is always false

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Fix trailing whitespace

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Fix mis-placed break

In 7c3a8f2a5ec95e2b13704562f36321e20ddfc190 I made a mistake and moved
a break below a bracket, causing a situation where the for loop would
always exit when it shouldn't.

This patch corrects that mistake.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: wlan-ng: Remove typedef prism2sta_authlist_t

Remove typdef prism2sta_authlist_t and replace its uses
in the code.
Signed-off-by: Vatika Harlalka <vatikaharlalka@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8188eu: Delete space

Deleted spaces before ','.Because it is prohibited by the kernel coding style.
Error found with checkpatch.pl

Signed-off-by: Hatice ERTURK <haticeerturk27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: Fix indentation style by space

This patch fixes the checkpatch.pl warning and error:

WARNING: please, no spaces at the start of a line

ERROR: code indent should use tabs where possible

Signed-off-by: Helen Fornazier <helen.fornazier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: remove trailing white space

Clean useless trailing white spaces

Signed-off-by: Helen Fornazier <helen.fornazier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: iio: use the BIT macro in .h files

This patch replace bit shifting on 1, 2, and 3 with the BIT(x) macro.
Issue addressed by checkpatch.pl with --strict flag.

This was done with the help of Coccninelle:

@r1@
constant int g;
@@
(
0<<g
|
1<<g
|
2<<g
|
3<<g
)

@script:python b@
g2 <<r1.g;
y;
@@
coccinelle.y = int(g2) + 1

@c@
constant int r1.g;
identifier b.y;
@@
(
-(1 << g)
+BIT(g)
|
-(0 << g)
+ 0
|
-(2 << g)
+BIT(y)
|
-(3 << g)
+(BIT(y)| BIT(g))
)

Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: iio: Fix file header to match standards

Fix file header to match Linux Kernel style. Remove Free Software
Foundation reference to silence the checkpatch.pl warning.
Add driver description and correct spelling mistakes.

Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: iio: Place driver in sleep mode on error

Put device in sleep mode if an error is encountered after
initialization in order to avoid wasting power.

Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: iio: Add kernel-doc for struct hmc5843

This patch documents the struct hmc5843 specific data following
this warning:
"CHECK: struct mutex definition without comment".

Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: Fix Sparse warnings for static declarations

The following patch fixes Sparse warnings in genops.c regrding:
"Symbol * was not declared. Should it be static?"

Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Stagin: lustre: Fix externs should be avoided in .c

This patch moves extern declaration from genops.c to obd_class.h,
addressing checkpatch.pl warning: externs should be avoided in .c

Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: Fix externs should be avoided in .c

Thi patch moves extern declaration to "obd_class.h".
Remove prototype from "class_obd.c".
Issue addressed by checkpatch.pl.

Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: remove extern in .c file

This patch removes extern from .c file; for the variable is not used
anywhere else in the file.
In addition, it mark it static in the one file it is in
"ldlm_resource.c".

Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: Convert macro class_export_rpc_dec into static inline function

This patch converts the macro class_export_rpc_dec into static inline
function. This is possible because the types of arguments at all the call
sites are same. So, the type of parameter is compatible with the types of
the arguments at all of the call sites.

Signed-off-by: Somya Anand <somyaanand214@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: Convert macro class_export_rpc_inc into static inline function

This patch converts the macro class_export_rpc_inc into static inline
function. This is possible because the types of arguments at all the call
sites are same. So, the type of parameter is compatible with the types of
the arguments at all of the call sites.

Signed-off-by: Somya Anand <somyaanand214@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: fix parenthesis alignment in visorchipset_main.c

Fix as many parenthesis alignment problems in this file as possible.

In cases where there was no good way to align to the leading parenthesis, the
content of the parenthesis were aligned as if there were no limit, and then the
leading indentation was moved back to one tab in from the previous line.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Fix CamelCase local variable in remaining_steps functions

Rename the CamelCase local variable

remainingSteps => remaining_steps

Update all references to use the corrected name.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: fix CamelCase local in textid functions

Fix the CamelCased local variable

textId => text_id

In both of the textid sysfs functions, and update all references to use the
corrected name.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: fix CamelCase variables in boottotool functions

Rename the local CamelCase variable

efiSparIndication => efi_spar_indication

Update all references to use the corrected name.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: fix CamelCase local toolAction

Rename the CamelCase local

toolAction => tool_action

In both of the sysfs functions for exposing this value, and update all
references to use the corrected name.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: fix CamelCase parameter in chipset functions

Fix the CamelCase parameter

msgHdr => msg_hdr

In all of the chipset functions. Update all references to use the corrected
name.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: fix CamelCase parameter msgHdr in controlvm functions

Fix the CamelCase parameter name

msgHdr => msg_hdr

In all of the controlvm functions in visorchipset_main.c. Update all references
to use the corrected name.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: fix CamelCase global Visorchipset_platform_device

Rename the CamelCase variable:

Visorchipset_platform_device => visorchipset_platform_device

Update all references to use the corrected name.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: fix CamelCased global MajorDev

Rename the CamelCase global:

MajorDev => major_dev

Update references to use the corrected name.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: fix CamelCase in responders functions

Fix the CamelCase parameters:

busNo => bus_no
devNo => dev_no

In the functions bus_create_response(), bus_destroy_response(),
device_create_response(), device_destroy_response(), and
device_resume_response().

Fix the CamelCase global structure name

BusDev_Responders => busdev_responders

And update all references to use the corrected names.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: fix CamelCased notifier globals

Fix these CamelCased names:

BusDev_Server_Notifiers => busdev_server_notifiers
BusDev_Client_Notifiers => busdev_client_notifiers

Update references to use the fixed names.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: fix CamelCased Parahotplug globals

Fix the CamelCase names:

Parahotplug_request_list => parahotplug_request_list
Parahotplug_request_list_lock => parahotplug_request_list_lock

Update references to use the corrected names.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: fix CamelCase global Visorchipset_cache_buffers_in_use

Rename this variable:

Visorchipset_cache_buffers_in_use => visorchipset_cache_buffers_in_use

Update all references to use the fixed name.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: fix CamelCase in putfile-related globals

Fix the CamelCase global names:

Putfile_buffer_list_pool => putfile_buffer_list_pool
Putfile_buffer_list_pool_name => putfile_buffer_list_pool_name
Putfile_request_list => putfile_request_list

Update all references to use the corrected names.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: fix CamelCased ControlVM globals

Fix the CamelCase global names:

ControlVm_Pending_Msg => controlvm_pending_msg
ControlVm_Pending_Msg_Valid => controlvm_pending_msg_valid

Update all references to use the corrected names.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: remove last remnants of proc entry code

All of the proc code using easyproc and procobjecttree support is gone,
so we can remove it from the source entirely.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: fix NULL pointer comparisons in uislib.c

Change pointer comparisons to NULL to just use the pointer directly.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: fix CamelCase label in visorchipset_init()

Fix the CamelCase label:

Away => cleanup

Update all references to use the fixed name.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: fix CamelCase in setup_crash_devices_work_queue()

Fix CamelCase names:

localCrashCreateBusMsg => local_crash_bus_msg
localCrashCreateDevMsg => local_crash_dev_msg
localSavedCrashMsgOffset => local_crash_msg_offset
localSavedCrashMsgCount => local_crash_msg_count
Away => cleanup

Update all references to use the fixed names.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: refactor controlvm_periodic_work()

Fix the CamelCase variable names:

gotACommand => got_command
Poll_Count => poll_count
Away => cleanup

Fix all references to use the new names. Remove the empty braces in the
while() and put in a trailing semicolon, for clarity.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: refactor handle_command()

First, fix the CamelCase local variable names:

parametersAddr => parm_addr
parametersBytes => parm_bytes
isLocalAddr => local_addr

Change the type of local_addr to bool instead of using the #defined
type. Update all references to use the fixed names. Fix the indentation of that
line that's over the 80 column limit.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: fix spacing in parahotplug_request_create

Just fix the spacing around the logical or operator in this function.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>