llc: fix sk_buff refcounting in llc_conn_state_process()

[ Upstream commit 36453c852816f19947ca482a595dffdd2efa4965 ]

If llc_conn_state_process() sees that llc_conn_service() put the skb on
a list, it will drop one fewer references to it.  This is wrong because
the current behavior is that llc_conn_service() never consumes a
reference to the skb.

The code also makes the number of skb references being dropped
conditional on which of ind_prim and cfm_prim are nonzero, yet neither
of these affects how many references are *acquired*.  So there is extra
code that tries to fix this up by sometimes taking another reference.

Remove the unnecessary/broken refcounting logic and instead just add an
skb_get() before the only two places where an extra reference is
actually consumed.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

llc: fix another potential sk_buff leak in llc_ui_sendmsg()

[ Upstream commit fc8d5db10cbe1338a52ebc74e7feab9276721774 ]

All callers of llc_conn_state_process() except llc_build_and_send_pkt()
(via llc_ui_sendmsg() -> llc_ui_send_data()) assume that it always
consumes a reference to the skb.  Fix this caller to do the same.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: accept deauth frames in IBSS mode

[ Upstream commit 95697f9907bfe3eab0ef20265a766b22e27dde64 ]

We can process deauth frames and all, but we drop them very
early in the RX path today - this could never have worked.

Fixes: 2cc59e784b54 ("mac80211: reply to AUTH with DEAUTH if sta allocation fails in IBSS")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20191004123706.15768-2-luca@coelho.fi
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stmmac: gmac4+: Not all Unicast addresses may be available

[ Upstream commit 25683bab09a70542b9f8e3e28f79b3369e56701f ]

Some setups may not have all Unicast addresses filters available. Check
the number of available filters before trying to setup it.

Fixes: 477286b53f55 ("stmmac: add GMAC4 core support")
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme: retain split access workaround for capability reads

[ Upstream commit 3a8ecc935efabdad106b5e06d07b150c394b4465 ]

Commit 7fd8930f26be4

  "nvme: add a common helper to read Identify Controller data"

has re-introduced an issue that we have attempted to work around in the
past, in commit a310acd7a7ea ("NVMe: use split lo_hi_{read,write}q").

The problem is that some PCIe NVMe controllers do not implement 64-bit
outbound accesses correctly, which is why the commit above switched
to using lo_hi_[read|write]q for all 64-bit BAR accesses occuring in
the code.

In the mean time, the NVMe subsystem has been refactored, and now calls
into the PCIe support layer for NVMe via a .reg_read64() method, which
fails to use lo_hi_readq(), and thus reintroduces the problem that the
workaround above aimed to address.

Given that, at the moment, .reg_read64() is only used to read the
capability register [which is known to tolerate split reads], let's
switch .reg_read64() to lo_hi_readq() as well.

This fixes a boot issue on some ARM boxes with NVMe behind a Synopsys
DesignWare PCIe host controller.

Fixes: 7fd8930f26be4 ("nvme: add a common helper to read Identify Controller data")
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ethernet: stmmac: Fix signedness bug in ipq806x_gmac_of_parse()

[ Upstream commit 231042181dc9d6122c6faba64e99ccb25f13cc6c ]

The "gmac->phy_mode" variable is an enum and in this context GCC will
treat it as an unsigned int so the error handling will never be
triggered.

Fixes: b1c17215d718 ("stmmac: add ipq806x glue layer")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

of: mdio: Fix a signedness bug in of_phy_get_and_connect()

[ Upstream commit d7eb651212fdbafa82d485d8e76095ac3b14c193 ]

The "iface" variable is an enum and in this context GCC treats it as
an unsigned int so the error handling is never triggered.

Fixes: b78624125304 ("of_mdio: Abstract a general interface for phy connect")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: axienet: fix a signedness bug in probe

[ Upstream commit 73e211e11be86715d66bd3c9d38b3c34b05fca9a ]

The "lp->phy_mode" is an enum but in this context GCC treats it as an
unsigned int so the error handling is never triggered.

Fixes: ee06b1728b95 ("net: axienet: add support for standard phy-mode binding")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stmmac: dwmac-meson8b: Fix signedness bug in probe

[ Upstream commit f10210517a2f37feea2edf85eb34c98977265c16 ]

The "dwmac->phy_mode" is an enum and in this context GCC treats it as
an unsigned int so the error handling is never triggered.

Fixes: 566e82516253 ("net: stmmac: add a glue driver for the Amlogic Meson 8b / GXBB DWMAC")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: broadcom/bcmsysport: Fix signedness in bcm_sysport_probe()

[ Upstream commit 25a584955f020d6ec499c513923fb220f3112d2b ]

The "priv->phy_interface" variable is an enum and in this context GCC
will treat it as unsigned so the error handling will never be
triggered.

Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hisilicon: Fix signedness bug in hix5hd2_dev_probe()

[ Upstream commit 002dfe8085255b7bf1e0758c3d195c5412d35be9 ]

The "priv->phy_mode" variable is an enum and in this context GCC will
treat it as unsigned to the error handling will never trigger.

Fixes: 57c5bc9ad7d7 ("net: hisilicon: add hix5hd2 mac driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: aquantia: Fix aq_vec_isr_legacy() return value

[ Upstream commit 31aefe14bc9f56566041303d733fda511d3a1c3e ]

The irqreturn_t type is an enum or an unsigned int in GCC.  That
creates to problems because it can't detect if the
self->aq_hw_ops->hw_irq_read() call fails and at the end the function
always returns IRQ_HANDLED.

drivers/net/ethernet/aquantia/atlantic/aq_vec.c:316 aq_vec_isr_legacy() warn: unsigned 'err' is never less than zero.
drivers/net/ethernet/aquantia/atlantic/aq_vec.c:329 aq_vec_isr_legacy() warn: always true condition '(err >= 0) => (0-u32max >= 0)'

Fixes: 970a2e9864b0 ("net: ethernet: aquantia: Vector operations")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/amd: Wait for completion of IOTLB flush in attach_device

[ Upstream commit 0b15e02f0cc4fb34a9160de7ba6db3a4013dc1b7 ]

To make sure the domain tlb flush completes before the
function returns, explicitly wait for its completion.

Signed-off-by: Filippo Sironi <sironi@amazon.de>
Fixes: 42a49f965a8d ("amd-iommu: flush domain tlb when attaching a new device")
[joro: Added commit message and fixes tag]
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/rds: Fix 'ib_evt_handler_call' element in 'rds_ib_stat_names'

[ Upstream commit 05a82481a3024b94db00b8c816bb3d526b5209e0 ]

All entries in 'rds_ib_stat_names' are stringified versions
of the corresponding "struct rds_ib_statistics" element
without the "s_"-prefix.

Fix entry 'ib_evt_handler_call' to do the same.

Fixes: f4f943c958a2 ("RDS: IB: ack more receive completions to improve performance")
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/cma: Fix false error message

[ Upstream commit a6e4d254c19b541a58caced322111084b27a7788 ]

In addr_handler(), assuming status == 0 and the device already has been
acquired (id_priv->cma_dev != NULL), we get the following incorrect
"error" message:

RDMA CM: ADDR_ERROR: failed to resolve IP. status 0

Fixes: 498683c6a7ee ("IB/cma: Add debug messages to error flows")
Link: https://lore.kernel.org/r/20190902092731.1055757-1-haakon.bugge@oracle.com
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath10k: adjust skb length in ath10k_sdio_mbox_rx_packet

[ Upstream commit b7139960832eb56fa15d390a4b5c8c5739bd0d1a ]

When the FW bundles multiple packets, pkt->act_len may be incorrect
as it refers to the first packet only (however, the FW will only
bundle packets that fit into the same pkt->alloc_len).

Before this patch, the skb length would be set (incorrectly) to
pkt->act_len in ath10k_sdio_mbox_rx_packet, and then later manually
adjusted in ath10k_sdio_mbox_rx_process_packet.

The first problem is that ath10k_sdio_mbox_rx_process_packet does not
use proper skb_put commands to adjust the length (it directly changes
skb->len), so we end up with a mismatch between skb->head + skb->tail
and skb->data + skb->len. This is quite serious, and causes corruptions
in the TCP stack, as the stack tries to coalesce packets, and relies
on skb->tail being correct (that is, skb_tail_pointer must point to
the first byte_after_ the data).

Instead of re-adjusting the size in ath10k_sdio_mbox_rx_process_packet,
this moves the code to ath10k_sdio_mbox_rx_packet, and also add a
bounds check, as skb_put would crash the kernel if not enough space is
available.

Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00007-QCARMSWP-1.

Fixes: 8530b4e7b22bc3b ("ath10k: sdio: set skb len for all rx packets")
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: iproc-gpio: Fix incorrect pinconf configurations

[ Upstream commit 398a1f50e3c731586182fd52b834103b0aa2f826 ]

Fix drive strength for AON/CRMU controller; fix pull-up/down setting
for CCM/CDRU controller.

Fixes: 616043d58a89 ("pinctrl: Rename gpio driver from cygnus to iproc")
Signed-off-by: Li Jin <li.jin@broadcom.com>
Link: https://lore.kernel.org/r/1567054348-19685-2-git-send-email-srinath.mannam@broadcom.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sonic: replace dev_kfree_skb in sonic_send_packet

[ Upstream commit 49f6c90bf6805948b597eabb499e500a47cf24be ]

sonic_send_packet will be processed in irq or non-irq
context, so it would better use dev_kfree_skb_any
instead of dev_kfree_skb.

Fixes: d9fb9f384292 ("*sonic/natsemi/ns83829: Move the National Semi-conductor drivers")
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (shtc1) fix shtc1 and shtw1 id mask

[ Upstream commit fdc7d8e829ec755c5cfb2f5a8d8c0cdfb664f895 ]

Fix an error in the bitmaskfor the shtc1 and shtw1 bitmask used to
retrieve the chip ID from the ID register. See section 5.7 of the shtw1
or shtc1 datasheet for details.

Fixes: 1a539d372edd9832444e7a3daa710c444c014dc9 ("hwmon: add support for Sensirion SHTC1 sensor")
Signed-off-by: Dan Robertson <dan@dlrobertson.com>
Link: https://lore.kernel.org/r/20190905014554.21658-3-dan@dlrobertson.com
[groeck: Reordered to be first in series and adjusted accordingly]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ixgbe: sync the first fragment unconditionally

[ Upstream commit e7ba676c6188d394a0133fc4b9bcd7ee50d54b7f ]

In Xen environment, if Xen-swiotlb is enabled, ixgbe driver
could possibly allocate a page, DMA memory buffer, for the first
fragment which is not suitable for Xen-swiotlb to do DMA operations.
Xen-swiotlb have to internally allocate another page for doing DMA
operations. This mechanism requires syncing the data from the internal
page to the page which ixgbe sends to upper network stack. However,
since commit f3213d932173 ("ixgbe: Update driver to make use of DMA
attributes in Rx path"), the unmap operation is performed with
DMA_ATTR_SKIP_CPU_SYNC. As a result, the sync is not performed.
Since the sync isn't performed, the upper network stack could receive
a incomplete network packet. By incomplete, it means the linear data
on the first fragment(between skb->head and skb->end) is invalid. So
we have to copy the data from the internal xen-swiotlb page to the page
which ixgbe sends to upper network stack through the sync operation.

More details from Alexander Duyck:
Specifically since we are mapping the frame with
DMA_ATTR_SKIP_CPU_SYNC we have to unmap with that as well. As a result
a sync is not performed on an unmap and must be done manually as we
skipped it for the first frag. As such we need to always sync before
possibly performing a page unmap operation.

Fixes: f3213d932173 ("ixgbe: Update driver to make use of DMA attributes in Rx path")
Signed-off-by: Firo Yang <firo.yang@suse.com>
Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: use correct count in btrfs_file_write_iter()

[ Upstream commit c09767a8960ca0500fb636bf73686723337debf4 ]

generic_write_checks() may modify iov_iter_count(), so we must get the
count after the call, not before. Using the wrong one has a couple of
consequences:

1. We check a longer range in check_can_nocow() for nowait than we're
   actually writing.
2. We create extra hole extent maps in btrfs_cont_expand(). As far as I
   can tell, this is harmless, but I might be missing something.

These issues are pretty minor, but let's fix it before something more
important trips on it.

Fixes: edf064e7c6fe ("btrfs: nowait aio support")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Btrfs: fix inode cache waiters hanging on path allocation failure

[ Upstream commit 9d123a35d7e97bb2139747b16127c9b22b6a593e ]

If the caching thread fails to allocate a path, it returns without waking
up any cache waiters, leaving them hang forever. Fix this by following the
same approach as when we fail to start the caching thread: print an error
message, disable inode caching and make the wakers fallback to non-caching
mode behaviour (calling btrfs_find_free_objectid()).

Fixes: 581bb050941b4f ("Btrfs: Cache free inode numbers in memory")
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Btrfs: fix inode cache waiters hanging on failure to start caching thread

[ Upstream commit a68ebe0790fc88b4314d17984a2cf99ce2361901 ]

If we fail to start the inode caching thread, we print an error message
and disable the inode cache, however we never wake up any waiters, so they
hang forever waiting for the caching to finish. Fix this by waking them
up and have them fallback to a call to btrfs_find_free_objectid().

Fixes: e60efa84252c05 ("Btrfs: avoid triggering bug_on() when we fail to start inode caching task")
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Btrfs: fix hang when loading existing inode cache off disk

[ Upstream commit 7764d56baa844d7f6206394f21a0e8c1f303c476 ]

If we are able to load an existing inode cache off disk, we set the state
of the cache to BTRFS_CACHE_FINISHED, but we don't wake up any one waiting
for the cache to be available. This means that anyone waiting for the
cache to be available, waiting on the condition that either its state is
BTRFS_CACHE_FINISHED or its available free space is greather than zero,
can hang forever.

This could be observed running fstests with MOUNT_OPTIONS="-o inode_cache",
in particular test case generic/161 triggered it very frequently for me,
producing a trace like the following:

  [63795.739712] BTRFS info (device sdc): enabling inode map caching
  [63795.739714] BTRFS info (device sdc): disk space caching is enabled
  [63795.739716] BTRFS info (device sdc): has skinny extents
  [64036.653886] INFO: task btrfs-transacti:3917 blocked for more than 120 seconds.
  [64036.654079]       Not tainted 5.2.0-rc4-btrfs-next-50 #1
  [64036.654143] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [64036.654232] btrfs-transacti D    0  3917      2 0x80004000
  [64036.654239] Call Trace:
  [64036.654258]  ? __schedule+0x3ae/0x7b0
  [64036.654271]  schedule+0x3a/0xb0
  [64036.654325]  btrfs_commit_transaction+0x978/0xae0 [btrfs]
  [64036.654339]  ? remove_wait_queue+0x60/0x60
  [64036.654395]  transaction_kthread+0x146/0x180 [btrfs]
  [64036.654450]  ? btrfs_cleanup_transaction+0x620/0x620 [btrfs]
  [64036.654456]  kthread+0x103/0x140
  [64036.654464]  ? kthread_create_worker_on_cpu+0x70/0x70
  [64036.654476]  ret_from_fork+0x3a/0x50
  [64036.654504] INFO: task xfs_io:3919 blocked for more than 120 seconds.
  [64036.654568]       Not tainted 5.2.0-rc4-btrfs-next-50 #1
  [64036.654617] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [64036.654685] xfs_io          D    0  3919   3633 0x00000000
  [64036.654691] Call Trace:
  [64036.654703]  ? __schedule+0x3ae/0x7b0
  [64036.654716]  schedule+0x3a/0xb0
  [64036.654756]  btrfs_find_free_ino+0xa9/0x120 [btrfs]
  [64036.654764]  ? remove_wait_queue+0x60/0x60
  [64036.654809]  btrfs_create+0x72/0x1f0 [btrfs]
  [64036.654822]  lookup_open+0x6bc/0x790
  [64036.654849]  path_openat+0x3bc/0xc00
  [64036.654854]  ? __lock_acquire+0x331/0x1cb0
  [64036.654869]  do_filp_open+0x99/0x110
  [64036.654884]  ? __alloc_fd+0xee/0x200
  [64036.654895]  ? do_raw_spin_unlock+0x49/0xc0
  [64036.654909]  ? do_sys_open+0x132/0x220
  [64036.654913]  do_sys_open+0x132/0x220
  [64036.654926]  do_syscall_64+0x60/0x1d0
  [64036.654933]  entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fix this by adding a wake_up() call right after setting the cache state to
BTRFS_CACHE_FINISHED, at start_caching(), when we are able to load the
cache from disk.

Fixes: 82d5902d9c681b ("Btrfs: Support reading/writing on disk free ino cache")
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: fnic: fix msix interrupt allocation

[ Upstream commit 3ec24fb4c035e9cbb2f02a48640a09aa913442a2 ]

pci_alloc_irq_vectors() returns number of vectors allocated.  Fix the check
for error condition.

Fixes: cca678dfbad49 ("scsi: fnic: switch to pci_alloc_irq_vectors")
Link: https://lore.kernel.org/r/20190827211340.1095-1-gvaradar@cisco.com
Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com>
Acked-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sonic: return NETDEV_TX_OK if failed to map buffer

[ Upstream commit 6e1cdedcf0362fed3aedfe051d46bd7ee2a85fe1 ]

NETDEV_TX_BUSY really should only be used by drivers that call
netif_tx_stop_queue() at the wrong moment. If dma_map_single() is
failed to map tx DMA buffer, it might trigger an infinite loop.
This patch use NETDEV_TX_OK instead of NETDEV_TX_BUSY, and change
printk to pr_err_ratelimited.

Fixes: d9fb9f384292 ("*sonic/natsemi/ns83829: Move the National Semi-conductor drivers")
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: serial: fsl_lpuart: Use appropriate lpuart32_* I/O funcs

[ Upstream commit 1da17d7cf8e2c4b60163d54300f72c02f510327c ]

When dealing with 32-bit variant of LPUART IP block appropriate I/O
helpers have to be used to properly deal with endianness
differences. Change all of the offending code to do that.

Fixes: a5fa2660d787 ("tty/serial/fsl_lpuart: Add CONSOLE_POLL support
for lpuart32.")
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: linux-imx@nxp.com
Cc: linux-serial@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/20190729195226.8862-14-andrew.smirnov@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath9k: dynack: fix possible deadlock in ath_dynack_node_{de}init

[ Upstream commit e1aa1a1db3b01c9890e82cf065cee99962ba1ed9 ]

Fix following lockdep warning disabling bh in
ath_dynack_node_init/ath_dynack_node_deinit

[   75.955878] --------------------------------
[   75.955880] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
[   75.955884] swapper/0/0 [HC0[0]:SC1[3]:HE1:SE0] takes:
[   75.955888] 00000000792a7ee0 (&(&da->qlock)->rlock){+.?.}, at: ath_dynack_sample_ack_ts+0x4d/0xa0 [ath9k_hw]
[   75.955905] {SOFTIRQ-ON-W} state was registered at:
[   75.955912]   lock_acquire+0x9a/0x160
[   75.955917]   _raw_spin_lock+0x2c/0x70
[   75.955927]   ath_dynack_node_init+0x2a/0x60 [ath9k_hw]
[   75.955934]   ath9k_sta_state+0xec/0x160 [ath9k]
[   75.955976]   drv_sta_state+0xb2/0x740 [mac80211]
[   75.956008]   sta_info_insert_finish+0x21a/0x420 [mac80211]
[   75.956039]   sta_info_insert_rcu+0x12b/0x2c0 [mac80211]
[   75.956069]   sta_info_insert+0x7/0x70 [mac80211]
[   75.956093]   ieee80211_prep_connection+0x42e/0x730 [mac80211]
[   75.956120]   ieee80211_mgd_auth.cold+0xb9/0x15c [mac80211]
[   75.956152]   cfg80211_mlme_auth+0x143/0x350 [cfg80211]
[   75.956169]   nl80211_authenticate+0x25e/0x2b0 [cfg80211]
[   75.956172]   genl_family_rcv_msg+0x198/0x400
[   75.956174]   genl_rcv_msg+0x42/0x90
[   75.956176]   netlink_rcv_skb+0x35/0xf0
[   75.956178]   genl_rcv+0x1f/0x30
[   75.956180]   netlink_unicast+0x154/0x200
[   75.956182]   netlink_sendmsg+0x1bf/0x3d0
[   75.956186]   ___sys_sendmsg+0x2c2/0x2f0
[   75.956187]   __sys_sendmsg+0x44/0x80
[   75.956190]   do_syscall_64+0x55/0x1a0
[   75.956192]   entry_SYSCALL_64_after_hwframe+0x49/0xbe
[   75.956194] irq event stamp: 2357092
[   75.956196] hardirqs last  enabled at (2357092): [<ffffffff818c62de>] _raw_spin_unlock_irqrestore+0x3e/0x50
[   75.956199] hardirqs last disabled at (2357091): [<ffffffff818c60b1>] _raw_spin_lock_irqsave+0x11/0x80
[   75.956202] softirqs last  enabled at (2357072): [<ffffffff8106dc09>] irq_enter+0x59/0x60
[   75.956204] softirqs last disabled at (2357073): [<ffffffff8106dcbe>] irq_exit+0xae/0xc0
[   75.956206]
               other info that might help us debug this:
[   75.956207]  Possible unsafe locking scenario:

[   75.956208]        CPU0
[   75.956209]        ----
[   75.956210]   lock(&(&da->qlock)->rlock);
[   75.956213]   <Interrupt>
[   75.956214]     lock(&(&da->qlock)->rlock);
[   75.956216]
                *** DEADLOCK ***

[   75.956217] 1 lock held by swapper/0/0:
[   75.956219]  #0: 000000003bb5675c (&(&sc->sc_pcu_lock)->rlock){+.-.}, at: ath9k_tasklet+0x55/0x240 [ath9k]
[   75.956225]
               stack backtrace:
[   75.956228] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.3.0-rc1-wdn+ #13
[   75.956229] Hardware name: Dell Inc. Studio XPS 1340/0K183D, BIOS A11 09/08/2009
[   75.956231] Call Trace:
[   75.956233]  <IRQ>
[   75.956236]  dump_stack+0x67/0x90
[   75.956239]  mark_lock+0x4c1/0x640
[   75.956242]  ? check_usage_backwards+0x130/0x130
[   75.956245]  ? sched_clock_local+0x12/0x80
[   75.956247]  __lock_acquire+0x484/0x7a0
[   75.956250]  ? __lock_acquire+0x3b9/0x7a0
[   75.956252]  lock_acquire+0x9a/0x160
[   75.956259]  ? ath_dynack_sample_ack_ts+0x4d/0xa0 [ath9k_hw]
[   75.956262]  _raw_spin_lock_bh+0x34/0x80
[   75.956268]  ? ath_dynack_sample_ack_ts+0x4d/0xa0 [ath9k_hw]
[   75.956275]  ath_dynack_sample_ack_ts+0x4d/0xa0 [ath9k_hw]
[   75.956280]  ath_rx_tasklet+0xd09/0xe90 [ath9k]
[   75.956286]  ath9k_tasklet+0x102/0x240 [ath9k]
[   75.956288]  tasklet_action_common.isra.0+0x6d/0x170
[   75.956291]  __do_softirq+0xcc/0x425
[   75.956294]  irq_exit+0xae/0xc0
[   75.956296]  do_IRQ+0x8a/0x110
[   75.956298]  common_interrupt+0xf/0xf
[   75.956300]  </IRQ>
[   75.956303] RIP: 0010:cpuidle_enter_state+0xb2/0x400
[   75.956308] RSP: 0018:ffffffff82203e70 EFLAGS: 00000202 ORIG_RAX: ffffffffffffffd7
[   75.956310] RAX: ffffffff82219800 RBX: ffffffff822bd0a0 RCX: 0000000000000000
[   75.956312] RDX: 0000000000000046 RSI: 0000000000000006 RDI: ffffffff82219800
[   75.956314] RBP: ffff888155a01c00 R08: 00000011af51aabe R09: 0000000000000000
[   75.956315] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000002
[   75.956317] R13: 00000011af51aabe R14: 0000000000000003 R15: ffffffff82219800
[   75.956321]  cpuidle_enter+0x24/0x40
[   75.956323]  do_idle+0x1ac/0x220
[   75.956326]  cpu_startup_entry+0x14/0x20
[   75.956329]  start_kernel+0x482/0x489
[   75.956332]  secondary_startup_64+0xa4/0xb0

Fixes: c774d57fd47c ("ath9k: add dynamic ACK timeout estimation")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: dac: ad5380: fix incorrect assignment to val

[ Upstream commit b1e18768ef1214c0a8048327918a182cabe09f9d ]

Currently the pointer val is being incorrectly incremented
instead of the value pointed to by val. Fix this by adding
in the missing * indirection operator.

Addresses-Coverity: ("Unused value")
Fixes: c03f2c536818 ("staging:iio:dac: Add AD5380 driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bcma: fix incorrect update of BCMA_CORE_PCI_MDIO_DATA

[ Upstream commit 420c20be08a4597404d272ae9793b642401146eb ]

An earlier commit re-worked the setting of the bitmask and is now
assigning v with some bit flags rather than bitwise or-ing them
into v, consequently the earlier bit-settings of v are being lost.
Fix this by replacing an assignment with the bitwise or instead.

Addresses-Coverity: ("Unused value")
Fixes: 2be25cac8402 ("bcma: add constants for PCI and use them")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqdomain: Add the missing assignment of domain->fwnode for named fwnode

[ Upstream commit 711419e504ebd68c8f03656616829c8ad7829389 ]

Recently device pass-through stops working for Linux VM running on Hyper-V.

git-bisect shows the regression is caused by the recent commit
467a3bb97432 ("PCI: hv: Allocate a named fwnode ..."), but the root cause
is that the commit d59f6617eef0 forgets to set the domain->fwnode for
IRQCHIP_FWNODE_NAMED*, and as a result:

1. The domain->fwnode remains to be NULL.

2. irq_find_matching_fwspec() returns NULL since "h->fwnode == fwnode" is
false, and pci_set_bus_msi_domain() sets the Hyper-V PCI root bus's
msi_domain to NULL.

3. When the device is added onto the root bus, the device's dev->msi_domain
is set to NULL in pci_set_msi_domain().

4. When a device driver tries to enable MSI-X, pci_msi_setup_msi_irqs()
calls arch_setup_msi_irqs(), which uses the native MSI chip (i.e.
arch/x86/kernel/apic/msi.c: pci_msi_controller) to set up the irqs, but
actually pci_msi_setup_msi_irqs() is supposed to call
msi_domain_alloc_irqs() with the hbus->irq_domain, which is created in
hv_pcie_init_irq_domain() and is associated with the Hyper-V chip
hv_msi_irq_chip. Consequently, the irq line is not properly set up, and
the device driver can not receive any interrupt.

Fixes: d59f6617eef0 ("genirq: Allow fwnode to carry name information only")
Fixes: 467a3bb97432 ("PCI: hv: Allocate a named fwnode instead of an address-based one")
Reported-by: Lili Deng <v-lide@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/PU1P153MB01694D9AF625AC335C600C5FBFBE0@PU1P153MB0169.APCP153.PROD.OUTLOOK.COM
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: greybus: light: fix a couple double frees

[ Upstream commit 329101244f214952606359d254ae883b7109e1a5 ]

The problem is in gb_lights_request_handler().  If we get a request to
change the config then we release the light with gb_lights_light_release()
and re-allocated it.  However, if the allocation fails part way through
then we call gb_lights_light_release() again.  This can lead to a couple
different double frees where we haven't cleared out the original values:

gb_lights_light_v4l2_unregister(light);
...
kfree(light->channels);
kfree(light->name);

I also made a small change to how we set "light->channels_count = 0;".
The original code handled this part fine and did not cause a use after
free but it was sort of complicated to read.

Fixes: 2870b52bae4c ("greybus: lights: add lights implementation")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Link: https://lore.kernel.org/r/20190829122839.GA20116@mwanda
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86, perf: Fix the dependency of the x86 insn decoder selftest

[ Upstream commit 7720804a2ae46c90265a32c81c45fb6f8d2f4e8b ]

Since x86 instruction decoder is not only for kprobes,
it should be tested when the insn.c is compiled.
(e.g. perf is enabled but kprobes is disabled)

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: cbe5c34c8c1f ("x86: Compile insn.c and inat.c only for KPROBES")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: Init device wakeup after device_add()

[ Upstream commit 8288022284859acbcc3cf1a073a1e2692d6c2543 ]

We may want to use the device pointer in device_init_wakeup() with
functions that expect the device to already be added with device_add().
For example, if we were to link the device initializing wakeup to
something in sysfs such as a class for wakeups we'll run into an error.
It looks like this code was written with the assumption that the device
would be added before initializing wakeup due to the order of operations
in power_supply_unregister().

Let's change the order of operations so we don't run into problems here.

Fixes: 948dcf966228 ("power_supply: Prevent suspend until power supply events are processed")
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Tri Vo <trong@android.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Ravi Chandra Sadineni <ravisadineni@chromium.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (lm75) Fix write operations for negative temperatures

[ Upstream commit 7d82fcc9d9e81241778aaa22fda7be753e237d86 ]

Writes into limit registers fail if the temperature written is negative.
The regmap write operation checks the value range, regmap_write accepts
an unsigned int as parameter, and the temperature value passed to
regmap_write is kept in a variable declared as long. Negative values
are converted large unsigned integers, which fails the range check.
Fix by type casting the temperature to u16 when calling regmap_write().

Cc: Iker Perez del Palomar Sustatxa <iker.perez@codethink.co.uk>
Fixes: e65365fed87f ("hwmon: (lm75) Convert to use regmap")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Partially revert "kfifo: fix kfifo_alloc() and kfifo_init()"

[ Upstream commit ab9bb6318b0967671e0c9b6537c1537d51ca4f45 ]

Commit dfe2a77fd243 ("kfifo: fix kfifo_alloc() and kfifo_init()") made
the kfifo code round the number of elements up.  That was good for
__kfifo_alloc(), but it's actually wrong for __kfifo_init().

The difference? __kfifo_alloc() will allocate the rounded-up number of
elements, but __kfifo_init() uses an allocation done by the caller.  We
can't just say "use more elements than the caller allocated", and have
to round down.

The good news? All the normal cases will be using power-of-two arrays
anyway, and most users of kfifo's don't use kfifo_init() at all, but one
of the helper macros to declare a KFIFO that enforce the proper
power-of-two behavior.  But it looks like at least ibmvscsis might be
affected.

The bad news? Will Deacon refers to an old thread and points points out
that the memory ordering in kfifo's is questionable.  See

  https://lore.kernel.org/lkml/20181211034032.32338-1-yuleixzhang@tencent.com/

for more.

Fixes: dfe2a77fd243 ("kfifo: fix kfifo_alloc() and kfifo_init()")
Reported-by: laokz <laokz@foxmail.com>
Cc: Stefani Seibold <stefani@seibold.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Greg KH <greg@kroah.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ahci: Do not export local variable ahci_em_messages

[ Upstream commit 60fc35f327e0a9e60b955c0f3c3ed623608d1baa ]

The commit ed08d40cdec4
  ("ahci: Changing two module params with static and __read_mostly")
moved ahci_em_messages to be static while missing the fact of exporting it.

WARNING: "ahci_em_messages" [vmlinux] is a static EXPORT_SYMBOL_GPL

Drop export for the local variable ahci_em_messages.

Fixes: ed08d40cdec4 ("ahci: Changing two module params with static and __read_mostly")
Cc: Chuansheng Liu <chuansheng.liu@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/mediatek: Fix iova_to_phys PA start for 4GB mode

[ Upstream commit 76ce65464fcd2c21db84391572b7938b716aceb0 ]

In M4U 4GB mode, the physical address is remapped as below:

CPU Physical address:

====================

0      1G       2G     3G       4G     5G
|---A---|---B---|---C---|---D---|---E---|
+--I/O--+------------Memory-------------+

IOMMU output physical address:
 =============================

                                4G      5G     6G      7G      8G
                                |---E---|---B---|---C---|---D---|
                                +------------Memory-------------+

The Region 'A'(I/O) can not be mapped by M4U; For Region 'B'/'C'/'D', the
bit32 of the CPU physical address always is needed to set, and for Region
'E', the CPU physical address keep as is. something looks like this:
CPU PA         ->    M4U OUTPUT PA
0x4000_0000          0x1_4000_0000 (Add bit32)
0x8000_0000          0x1_8000_0000 ...
0xc000_0000          0x1_c000_0000 ...
0x1_0000_0000        0x1_0000_0000 (No change)

Additionally, the iommu consumers always use the CPU phyiscal address.

The PA in the iova_to_phys that is got from v7s always is u32, But
from the CPU point of view, PA only need add BIT(32) when PA < 0x4000_0000.

Fixes: 30e2fccf9512 ("iommu/mediatek: Enlarge the validate PA range
for 4GB mode")
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mips: avoid explicit UB in assignment of mips_io_port_base

[ Upstream commit 12051b318bc3ce5b42d6d786191008284b067d83 ]

The code in question is modifying a variable declared const through
pointer manipulation.  Such code is explicitly undefined behavior, and
is the lone issue preventing malta_defconfig from booting when built
with Clang:

If an attempt is made to modify an object defined with a const-qualified
type through use of an lvalue with non-const-qualified type, the
behavior is undefined.

LLVM is removing such assignments. A simple fix is to not declare
variables const that you plan on modifying.  Limiting the scope would be
a better method of preventing unwanted writes to such a variable.

Further, the code in question mentions "compiler bugs" without any links
to bug reports, so it is difficult to know if the issue is resolved in
GCC. The patch was authored in 2006, which would have been GCC 4.0.3 or
4.1.1. The minimal supported version of GCC in the Linux kernel is
currently 4.6.

For what its worth, there was UB before the commit in question, it just
added a barrier and got lucky IRT codegen. I don't think there's any
actual compiler bugs related, just runtime bugs due to UB.

Link: https://github.com/ClangBuiltLinux/linux/issues/610
Fixes: 966f4406d903 ("[MIPS] Work around bad code generation for <asm/io.h>.")
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Debugged-by: Nathan Chancellor <natechancellor@gmail.com>
Suggested-by: Eli Friedman <efriedma@quicinc.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: ralf@linux-mips.org
Cc: jhogan@kernel.org
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Hassan Naveed <hnaveed@wavecomp.com>
Cc: Stephen Kitt <steve@sk2.org>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: clang-built-linux@googlegroups.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: pcf2127: bugfix: read rtc disables watchdog

[ Upstream commit 7f43020e3bdb63d65661ed377682702f8b34d3ea ]

The previous fix listed bulk read of registers as root cause of
accendential disabling of watchdog, since the watchdog counter
register (WD_VAL) was zeroed.

Fixes: 3769a375ab83 rtc: pcf2127: bulk read only date and time registers.

Tested with the same PCF2127 chip as Sean reveled root cause
of WD_VAL register value zeroing was caused by reading CTRL2
register which is one of the watchdog feature control registers.

So the solution is to not read the first two control registers
(CTRL1 and CTRL2) in pcf2127_rtc_read_time as they are not
needed anyway. Size of local buf variable is kept to allow
easy usage of register defines to improve readability of code.

Debug trace line was updated after CTRL1 and CTRL2 are no longer
read from the chip. Also replaced magic numbers in buf access
with register defines.

Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Link: https://lore.kernel.org/r/20190822131936.18772-3-bruno.thomsen@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: atmel: atmel-isi: fix timeout value for stop streaming

[ Upstream commit 623fd246bb40234fe68dd4e7c1f1f081f9c45a3d ]

In case of sensor malfunction, stop streaming timeout takes much longer
than expected. This is due to conversion of time to jiffies: milliseconds
multiplied with HZ (ticks/second) gives out a value of jiffies with 10^3
greater. We need to also divide by 10^3 to obtain the right jiffies value.
In other words FRAME_INTERVAL_MILLI_SEC must be in seconds in order to
multiply by HZ and get the right jiffies value to add to the current
jiffies for the timeout expire time.

Fixes: 195ebc43bf76 ("[media] V4L: at91: add Atmel Image Sensor Interface (ISI) support")
Signed-off-by: Alexandre Kroupski <alexandre.kroupski@ingenico.com>
Reviewed-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: minstrel_ht: fix per-group max throughput rate initialization

[ Upstream commit 56dd918ff06e3ee24d8067e93ed12b2a39e71394 ]

The group number needs to be multiplied by the number of rates per group
to get the full rate index

Fixes: 5935839ad735 ("mac80211: improve minstrel_ht rate sorting by throughput & probability")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20190820095449.45255-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: dw: platform: Switch to acpi_dma_controller_register()

[ Upstream commit e7b8514e4d68bec21fc6385fa0a66797ddc34ac9 ]

There is a possibility to have registered ACPI DMA controller
while it has been gone already.

To avoid the potential crash, move to non-managed
acpi_dma_controller_register().

Fixes: 42c91ee71d6d ("dw_dmac: add ACPI support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20190820131546.75744-8-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: sun4i-i2s: RX and TX counter registers are swapped

[ Upstream commit cf2c0e1ce9544df42170fb921f12da82dc0cc8d6 ]

The RX and TX counters registers offset have been swapped, fix that.

Fixes: fa7c0d13cb26 ("ASoC: sunxi: Add Allwinner A10 Digital Audio driver")
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://lore.kernel.org/r/8b26477560ad5fd8f69e037b167c5e61de5c26a3.1566242458.git-series.maxime.ripard@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

signal: Allow cifs and drbd to receive their terminating signals

[ Upstream commit 33da8e7c814f77310250bb54a9db36a44c5de784 ]

My recent to change to only use force_sig for a synchronous events
wound up breaking signal reception cifs and drbd.  I had overlooked
the fact that by default kthreads start out with all signals set to
SIG_IGN.  So a change I thought was safe turned out to have made it
impossible for those kernel thread to catch their signals.

Reverting the work on force_sig is a bad idea because what the code
was doing was very much a misuse of force_sig.  As the way force_sig
ultimately allowed the signal to happen was to change the signal
handler to SIG_DFL.  Which after the first signal will allow userspace
to send signals to these kernel threads.  At least for
wake_ack_receiver in drbd that does not appear actively wrong.

So correct this problem by adding allow_kernel_signal that will allow
signals whose siginfo reports they were sent by the kernel through,
but will not allow userspace generated signals, and update cifs and
drbd to call allow_kernel_signal in an appropriate place so that their
thread can receive this signal.

Fixing things this way ensures that userspace won't be able to send
signals and cause problems, that it is clear which signals the
threads are expecting to receive, and it guarantees that nothing
else in the system will be affected.

This change was partly inspired by similar cifs and drbd patches that
added allow_signal.

Reported-by: ronnie sahlberg <ronniesahlberg@gmail.com>
Reported-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Tested-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Cc: Steve French <smfrench@gmail.com>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Fixes: 247bc9470b1e ("cifs: fix rmmod regression in cifs.ko caused by force_sig changes")
Fixes: 72abe3bcf091 ("signal/cifs: Fix cifs_put_tcp_session to call send_sig instead of force_sig")
Fixes: fee109901f39 ("signal/drbd: Use send_sig not force_sig")
Fixes: 3cf5d076fb4d ("signal: Remove task parameter from force_sig")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: Fix handling FRAG_ERR when NVM_INSTALL_UPDATE cmd fails

[ Upstream commit dd2ebf3404c7c295014bc025dea23960960ceb1a ]

If FW returns FRAG_ERR in response error code, driver is resending the
command only when HWRM command returns success. Fix the code to resend
NVM_INSTALL_UPDATE command with DEFRAG install flags, if FW returns
FRAG_ERR in its response error code.

Fixes: cb4d1d626145 ("bnxt_en: Retry failed NVM_INSTALL_UPDATE with defragmentation flag enabled.")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/rds: Add a few missing rds_stat_names entries

[ Upstream commit 55c70ca00c982fbc0df4c4d3e31747fb73f4ddb5 ]

In a previous commit, fields were added to "struct rds_statistics"
but array "rds_stat_names" was not updated accordingly.

Please note the inconsistent naming of the string representations
that is done in the name of compatibility
with the Oracle internal code-base.

s_recv_bytes_added_to_socket     -> "recv_bytes_added_to_sock"
s_recv_bytes_removed_from_socket -> "recv_bytes_freed_fromsock"

Fixes: 192a798f5299 ("RDS: add stat for socket recv memory usage")
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: wm8737: Fix copy-paste error in wm8737_snd_controls

[ Upstream commit 554b75bde64bcad9662530726d1483f7ef012069 ]

sound/soc/codecs/wm8737.c:112:29: warning:
 high_3d defined but not used [-Wunused-const-variable=]

'high_3d' should be used for 3D High Cut-off.

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 2a9ae13a2641 ("ASoC: Add initial WM8737 driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20190815091920.64480-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: cs4349: Use PM ops 'cs4349_runtime_pm'

[ Upstream commit 9b4275c415acca6264a3d7f1182589959c93d530 ]

sound/soc/codecs/cs4349.c:358:32: warning:
 cs4349_runtime_pm defined but not used [-Wunused-const-variable=]

cs4349_runtime_pm ops already defined, it seems
we should enable it.

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: e40da86 ("ASoC: cs4349: Add support for Cirrus Logic CS4349")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190815090157.70036-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: es8328: Fix copy-paste error in es8328_right_line_controls

[ Upstream commit 630742c296341a8cfe00dfd941392025ba8dd4e8 ]

It seems 'es8328_rline_enum' should be used
in es8328_right_line_controls

Fixes: 567e4f98922c ("ASoC: add es8328 codec driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190815092300.68712-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: set error return correctly when ext4_htree_store_dirent fails

[ Upstream commit 7a14826ede1d714f0bb56de8167c0e519041eeda ]

Currently when the call to ext4_htree_store_dirent fails the error return
variable 'ret' is is not being set to the error code and variable count is
instead, hence the error code is not being returned.  Fix this by assigning
ret to the error return code.

Addresses-Coverity: ("Unused value")
Fixes: 8af0f0822797 ("ext4: fix readdir error in the case of inline_data+dir_index")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: caam - free resources in case caam_rng registration failed

[ Upstream commit c59a1d41672a89b5cac49db1a472ff889e35a2d2 ]

Check the return value of the hardware registration for caam_rng and free
resources in case of failure.

Fixes: e24f7c9e87d4 ("crypto: caam - hwrng support")
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: fix rmmod regression in cifs.ko caused by force_sig changes

[ Upstream commit 247bc9470b1eeefc7b58cdf2c39f2866ba651509 ]

Fixes: 72abe3bcf091 ("signal/cifs: Fix cifs_put_tcp_session to call send_sig instead of force_sig")

The global change from force_sig caused module unloading of cifs.ko
to fail (since the cifsd process could not be killed, "rmmod cifs"
now would always fail)

Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Fix mlx5_ifc_query_lag_out_bits

[ Upstream commit ea77388b02270b0af8dc57f668f311235ea068f0 ]

Remove the "reserved_at_40" field to match the device specification.

Fixes: 84df61ebc69b ("net/mlx5: Add HW interfaces used by LAG")
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: stm32: add missing vdda-supply to adc on stm32h743i-eval

[ Upstream commit 493e84c5dc4d703d976b5875f5db22dae08a0782 ]

Add missing vdda-supply required by STM32 ADC.

Fixes: 090992a9ca54 ("ARM: dts: stm32: enable ADC on stm32h743i-eval
board")

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tipc: reduce risk of wakeup queue starvation

[ Upstream commit 7c5b42055964f587e55bd87ef334c3a27e95d144 ]

In commit 365ad353c256 ("tipc: reduce risk of user starvation during
link congestion") we allowed senders to add exactly one list of extra
buffers to the link backlog queues during link congestion (aka
"oversubscription"). However, the criteria for when to stop adding
wakeup messages to the input queue when the overload abates is
inaccurate, and may cause starvation problems during very high load.

Currently, we stop adding wakeup messages after 10 total failed attempts
where we find that there is no space left in the backlog queue for a
certain importance level. The counter for this is accumulated across all
levels, which may lead the algorithm to leave the loop prematurely,
although there may still be plenty of space available at some levels.
The result is sometimes that messages near the wakeup queue tail are not
added to the input queue as they should be.

We now introduce a more exact algorithm, where we keep adding wakeup
messages to a level as long as the backlog queue has free slots for
the corresponding level, and stop at the moment there are no more such
slots or when there are no more wakeup messages to dequeue.

Fixes: 365ad35 ("tipc: reduce risk of user starvation during link congestion")
Reported-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: aoa: onyx: always initialize register read value

[ Upstream commit f474808acb3c4b30552d9c59b181244e0300d218 ]

A lot of places in the driver use onyx_read_register() without
checking the return value, and it's been working OK for ~10 years
or so, so probably never fails ... Rather than trying to check the
return value everywhere, which would be relatively intrusive, at
least make sure we don't use an uninitialized value.

Fixes: f3d9478b2ce4 ("[ALSA] snd-aoa: add snd-aoa")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: ccp - Reduce maximum stack usage

[ Upstream commit 72c8117adfced37df101c8c0b3f363e0906f83f0 ]

Each of the operations in ccp_run_cmd() needs several hundred
bytes of kernel stack. Depending on the inlining, these may
need separate stack slots that add up to more than the warning
limit, as shown in this clang based build:

drivers/crypto/ccp/ccp-ops.c:871:12: error: stack frame size of 1164 bytes in function 'ccp_run_aes_cmd' [-Werror,-Wframe-larger-than=]
static int ccp_run_aes_cmd(struct ccp_cmd_queue *cmd_q, struct ccp_cmd *cmd)

The problem may also happen when there is no warning, e.g. in the
ccp_run_cmd()->ccp_run_aes_cmd()->ccp_run_aes_gcm_cmd() call chain with
over 2000 bytes.

Mark each individual function as 'noinline_for_stack' to prevent
this from happening, and move the calls to the two special cases for aes
into the top-level function. This will keep the actual combined stack
usage to the mimimum: 828 bytes for ccp_run_aes_gcm_cmd() and
at most 524 bytes for each of the other cases.

Fixes: 63b945091a07 ("crypto: ccp - CCP device driver and interface support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/kgbd: Use NMI_VECTOR not APIC_DM_NMI

[ Upstream commit 2591bc4e8d70b4e1330d327fb7e3921f4e070a51 ]

apic->send_IPI_allbutself() takes a vector number as argument.

APIC_DM_NMI is clearly not a vector number. It's defined to 0x400 which is
outside the vector space.

Use NMI_VECTOR instead as that's what it is intended to be.

Fixes: 82da3ff89dc2 ("x86: kgdb support")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190722105218.855189979@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

mic: avoid statically declaring a 'struct device'.

[ Upstream commit bc83f79bd2119230888fb8574639d5a51b38f903 ]

Generally, declaring a platform device as a static variable is
a bad idea and can cause all kinds of problems, in particular
with the DMA configuration and lifetime rules.

A specific problem we hit here is from a bug in clang that warns
about certain (otherwise valid) macros when used in static variables:

drivers/misc/mic/card/mic_x100.c:285:27: warning: shift count >= width of type [-Wshift-count-overflow]
static u64 mic_dma_mask = DMA_BIT_MASK(64);
                          ^~~~~~~~~~~~~~~~
include/linux/dma-mapping.h:141:54: note: expanded from macro 'DMA_BIT_MASK'
 #define DMA_BIT_MASK(n) (((n) == 64) ? ~0ULL : ((1ULL<<(n))-1))
                                                     ^ ~~~

A slightly better way here is to create the platform device dynamically
and set the dma mask in the probe function.
This avoids the warning and some other problems, but is still not ideal
because the device creation should really be separated from the driver,
and the fact that the device has no parent means we have to force
the dma mask rather than having it set up from the bus that the device
is actually on.

Fixes: dd8d8d44df64 ("misc: mic: MIC card driver specific changes to enable SCIF")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20190712092426.872625-1-arnd@arndb.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: host: xhci-hub: fix extra endianness conversion

[ Upstream commit 6269e4c76eacabaea0d0099200ae1a455768d208 ]

Don't do extra cpu_to_le32 conversion for
put_unaligned_le32 because it is already implemented
in this function.

Fixes sparse error:
xhci-hub.c:1152:44: warning: incorrect type in argument 1 (different base types)
xhci-hub.c:1152:44:    expected unsigned int [usertype] val
xhci-hub.c:1152:44:    got restricted __le32 [usertype]

Fixes: 395f540 "xhci: support new USB 3.1 hub request to get extended port status"
Cc: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Link: https://lore.kernel.org/r/1562501839-26522-1-git-send-email-ruslan.bilovol@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qed: reduce maximum stack frame size

[ Upstream commit 7c116e02a4a7575c8c62bfd2106e3e3ec8fb99dc ]

clang warns about an overly large stack frame in one function
when it decides to inline all __qed_get_vport_*() functions into
__qed_get_vport_stats():

drivers/net/ethernet/qlogic/qed/qed_l2.c:1889:13: error: stack frame size of 1128 bytes in function '_qed_get_vport_stats' [-Werror,-Wframe-larger-than=]

Use a noinline_for_stack annotation to prevent clang from inlining
these, which keeps the maximum stack usage at around half of that
in the worst case, similar to what we get with gcc.

Fixes: 86622ee75312 ("qed: Move statistics to L2 code")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libertas_tf: Use correct channel range in lbtf_geo_init

[ Upstream commit 2ec4ad49b98e4a14147d04f914717135eca7c8b1 ]

It seems we should use 'range' instead of 'priv->range'
in lbtf_geo_init(), because 'range' is the corret one
related to current regioncode.

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 691cdb49388b ("libertas_tf: command helper functions for libertas_tf")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PM: sleep: Fix possible overflow in pm_system_cancel_wakeup()

[ Upstream commit 2933954b71f10d392764f95eec0f0aa2d103054b ]

It is not actually guaranteed that pm_abort_suspend will be
nonzero when pm_system_cancel_wakeup() is called which may lead to
subtle issues, so make it use atomic_dec_if_positive() instead of
atomic_dec() for the safety sake.

Fixes: 33e4f80ee69b ("ACPI / PM: Ignore spurious SCI wakeups from suspend-to-idle")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: sunxi-ng: v3s: add the missing PLL_DDR1

[ Upstream commit c5ed9475c22c89d5409402055142372e35d26a3f ]

The user manual of V3/V3s/S3 declares a PLL_DDR1, however it's forgot
when developing the V3s CCU driver.

Add back the missing PLL_DDR1.

Fixes: d0f11d14b0bc ("clk: sunxi-ng: add support for V3s CCU")
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: libfc: fix null pointer dereference on a null lport

[ Upstream commit 41a6bf6529edd10a6def42e3b2c34a7474bcc2f5 ]

Currently if lport is null then the null lport pointer is dereference when
printing out debug via the FC_LPORT_DB macro. Fix this by using the more
generic FC_LIBFC_DBG debug macro instead that does not use lport.

Addresses-Coverity: ("Dereference after null check")
Fixes: 7414705ea4ae ("libfc: Add runtime debugging with debug_logging module parameter")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: pasemi: fix an use-after-free in pasemi_mac_phy_init()

[ Upstream commit faf5577f2498cea23011b5c785ef853ded22700b ]

The phy_dn variable is still being used in of_phy_connect() after the
of_node_put() call, which may result in use-after-free.

Fixes: 1dd2d06c0459 ("net: Rework pasemi_mac driver to use of_mdio infrastructure")
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Fixs hw access invalid dma memory error

[ Upstream commit ec5bc2cc69b4fc494e04d10fc5226f6f9cf67c56 ]

When smmu is enable, if execute the perftest command and then use 'kill
-9' to exit, follow this operation repeatedly, the kernel will have a high
probability to print the following smmu event:

  arm-smmu-v3 arm-smmu-v3.1.auto: event 0x10 received:
  arm-smmu-v3 arm-smmu-v3.1.auto:  0x00007d0000000010
  arm-smmu-v3 arm-smmu-v3.1.auto:  0x0000020900000080
  arm-smmu-v3 arm-smmu-v3.1.auto:  0x00000000f47cf000
  arm-smmu-v3 arm-smmu-v3.1.auto:  0x00000000f47cf000

This is because the hw will periodically refresh the qpc cache until the
next reset.

This patch fixed it by removing the action that release qpc memory in the
'hns_roce_qp_free' function.

Fixes: 9a4435375cd1 ("IB/hns: Add driver files for hns RoCE driver")
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

devres: allow const resource arguments

[ Upstream commit 9dea44c91469512d346e638694c22c30a5273992 ]

devm_ioremap_resource() does not currently take 'const' arguments,
which results in a warning from the first driver trying to do it
anyway:

drivers/gpio/gpio-amd-fch.c: In function 'amd_fch_gpio_probe':
drivers/gpio/gpio-amd-fch.c:171:49: error: passing argument 2 of 'devm_ioremap_resource' discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers]
  priv->base = devm_ioremap_resource(&pdev->dev, &amd_fch_gpio_iores);
                                                 ^~~~~~~~~~~~~~~~~~~

Change the prototype to allow it, as there is no real reason not to.

Fixes: 9bb2e0452508 ("gpio: amd: Make resource struct const")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20190628150049.1108048-1-arnd@arndb.de
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviwed-By: Enrico Weigelt <info@metux.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rxrpc: Fix uninitialized error code in rxrpc_send_data_packet()

[ Upstream commit 3427beb6375d04e9627c67343872e79341a684ea ]

With gcc 4.1:

    net/rxrpc/output.c: In function ‘rxrpc_send_data_packet’:
    net/rxrpc/output.c:338: warning: ‘ret’ may be used uninitialized in this function

Indeed, if the first jump to the send_fragmentable label is made, and
the address family is not handled in the switch() statement, ret will be
used uninitialized.

Fix this by BUG()'ing as is done in other places in rxrpc where internal
support for future address families will need adding.  It should not be
possible to reach this normally as the address families are checked
up-front.

Fixes: 5a924b8951f835b5 ("rxrpc: Don't store the rxrpc header in the Tx queue sk_buffs")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: intel-lpss: Release IDA resources

[ Upstream commit 02f36911c1b41fcd8779fa0c135aab0554333fa5 ]

ida instances allocate some internal memory for ->free_bitmap
in addition to the base 'struct ida'. Use ida_destroy() to release
that memory at module_exit().

Fixes: 4b45efe85263 ("mfd: Add support for Intel Sunrisepoint LPSS devices")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/amd: Make iommu_disable safer

[ Upstream commit 3ddbe913e55516d3e2165d43d4d5570761769878 ]

Make it safe to call iommu_disable during early init error conditions
before mmio_base is set, but after the struct amd_iommu has been added
to the amd_iommu_list. For example, this happens if firmware fails to
fill in mmio_phys in the ACPI table leading to a NULL pointer
dereference in iommu_feature_disable.

Fixes: 2c0ae1720c09c ('iommu/amd: Convert iommu initialization to state machine')
Signed-off-by: Kevin Mitchell <kevmitch@arista.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: Fix ethtool selftest crash under error conditions.

[ Upstream commit d27e2ca1166aefd54d9c48fb6647dee8115a5dfc ]

After ethtool loopback packet tests, we re-open the nic for the next
IRQ test.  If the open fails, we must not proceed with the IRQ test
or we will crash with NULL pointer dereference.  Fix it by checking
the bnxt_open_nic() return code before proceeding.

Reported-by: Somasundaram Krishnasamy <somasundaram.krishnasamy@oracle.com>
Fixes: 67fea463fd87 ("bnxt_en: Add interrupt test to ethtool -t selftest.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvmem: imx-ocotp: Ensure WAIT bits are preserved when setting timing

[ Upstream commit 0493c4792b4eb260441e57f52cc11a9ded48b5a7 ]

The i.MX6 and i.MX8 both have a bit-field spanning bits 27:22 called the
WAIT field.

The WAIT field according to the documentation for both parts "specifies
time interval between auto read and write access in one time program. It is
given in number of ipg_clk periods."

This patch ensures that the relevant field is read and written back to the
timing register.

Fixes: 0642bac7da42 ("nvmem: imx-ocotp: add write support")

Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: Fix -Wunused-const-variable

[ Upstream commit da642427bd7710ec4f4140f693f59aa8521a358c ]

Clang produces the following warning

drivers/clk/qcom/gcc-msm8996.c:133:32: warning: unused variable
'gcc_xo_gpll0_gpll2_gpll3_gpll0_early_div_map' [-Wunused-const-variable]
static const struct
parent_map gcc_xo_gpll0_gpll2_gpll3_gpll0_early_div_map[] =
{ ^drivers/clk/qcom/gcc-msm8996.c:141:27: warning: unused variable
'gcc_xo_gpll0_gpll2_gpll3_gpll0_early_div' [-Wunused-const-variable] static
const char * const gcc_xo_gpll0_gpll2_gpll3_gpll0_early_div[] = { ^
drivers/clk/qcom/gcc-msm8996.c:187:32: warning: unused variable
'gcc_xo_gpll0_gpll2_gpll3_gpll1_gpll4_gpll0_early_div_map'
[-Wunused-const-variable] static const struct parent_map
gcc_xo_gpll0_gpll2_gpll3_gpll1_gpll4_gpll0_early_div_map[] = { ^
drivers/clk/qcom/gcc-msm8996.c:197:27: warning: unused variable
'gcc_xo_gpll0_gpll2_gpll3_gpll1_gpll4_gpll0_early_div'
[-Wunused-const-variable] static const char * const
gcc_xo_gpll0_gpll2_gpll3_gpll1_gpll4_gpll0_early_div[] = {

It looks like these were never used.

Fixes: b1e010c0730a ("clk: qcom: Add MSM8996 Global Clock Control (GCC) driver")
Cc: clang-built-linux@googlegroups.com
Link: https://github.com/ClangBuiltLinux/linux/issues/518
Suggested-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: hsu: Revert "set HSU_CH_MTSR to memory width"

[ Upstream commit c24a5c735f87d0549060de31367c095e8810b895 ]

The commit

  080edf75d337 ("dmaengine: hsu: set HSU_CH_MTSR to memory width")

has been mistakenly submitted. The further investigations show that
the original code does better job since the memory side transfer size
has never been configured by DMA users.

As per latest revision of documentation: "Channel minimum transfer size
(CHnMTSR)... For IOSF UART, maximum value that can be programmed is 64 and
minimum value that can be programmed is 1."

This reverts commit 080edf75d337d35faa6fc3df99342b10d2848d16.

Fixes: 080edf75d337 ("dmaengine: hsu: set HSU_CH_MTSR to memory width")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/ioctl: Add check for the sample_period value

[ Upstream commit 913a90bc5a3a06b1f04c337320e9aeee2328dd77 ]

perf_event_open() limits the sample_period to 63 bits. See:

  0819b2e30ccb ("perf: Limit perf_event_attr::sample_period to 63 bits")

Make ioctl() consistent with it.

Also on PowerPC, negative sample_period could cause a recursive
PMIs leading to a hang (reported when running perf-fuzzer).

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: maddy@linux.vnet.ibm.com
Cc: mpe@ellerman.id.au
Fixes: 0819b2e30ccb ("perf: Limit perf_event_attr::sample_period to 63 bits")
Link: https://lkml.kernel.org/r/20190604042953.914-1-ravi.bangoria@linux.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/a3xx: remove TPL1 regs from snapshot

[ Upstream commit f47bee2ba447bebc304111c16ef1e1a73a9744dd ]

These regs are write-only, and the hw throws a hissy-fit (ie. reboots)
when we try to read them for GPU state snapshot, in response to a GPU
hang.  It is rather impolite when GPU recovery triggers an insta-
reboot, so lets remove the TPL1 registers from the snapshot.

Fixes: 7198e6b03155 drm/msm: add a3xx gpu support
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: pcf8563: Clear event flags and disable interrupts before requesting irq

[ Upstream commit 3572e8aea3bf925dac1dbf86127657c39fe5c254 ]

Besides the alarm, the PCF8563 also has a timer triggered interrupt.
In cases where the previous system left the timer and interrupts on,
or somehow the bits got enabled, the interrupt would keep triggering
as the kernel doesn't know about it.

Clear both the alarm and timer event flags, and disable the interrupts,
before requesting the interrupt line.

Fixes: ede3e9d47cca ("drivers/rtc/rtc-pcf8563.c: add alarm support")
Fixes: a45d528aab8b ("rtc: pcf8563: clear expired alarm at boot time")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: pcf8563: Fix interrupt trigger method

[ Upstream commit 65f662cbf829834fa4d94190eb7691e5a9cb92d8 ]

The PCF8563 datasheet says the interrupt line is active low and stays
active until the events are cleared, i.e. a level trigger interrupt.

Fix the flags used to request the interrupt.

Fixes: ede3e9d47cca ("drivers/rtc/rtc-pcf8563.c: add alarm support")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: ti: davinci-mcasp: Fix slot mask settings when using multiple AXRs

[ Upstream commit fd14f4436fd47d5418023c90e933e66d3645552e ]

If multiple serializers are connected in the system and the number of
channels will need to use more than one serializer the mask to enable the
serializers were left to 0 if tdm_mask is provided

Fixes: dd55ff8346a97 ("ASoC: davinci-mcasp: Add set_tdm_slots() support")

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/af_iucv: always register net_device notifier

[ Upstream commit 06996c1d4088a0d5f3e7789d7f96b4653cc947cc ]

Even when running as VM guest (ie pr_iucv != NULL), af_iucv can still
open HiperTransport-based connections. For robust operation these
connections require the af_iucv_netdev_notifier, so register it
unconditionally.

Also handle any error that register_netdevice_notifier() returns.

Fixes: 9fbd87d41392 ("af_iucv: handle netdev events")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: netem: fix backlog accounting for corrupted GSO frames

[ Upstream commit 177b8007463c4f36c9a2c7ce7aa9875a4cad9bd5 ]

When GSO frame has to be corrupted netem uses skb_gso_segment()
to produce the list of frames, and re-enqueues the segments one
by one.  The backlog length has to be adjusted to account for
new frames.

The current calculation is incorrect, leading to wrong backlog
lengths in the parent qdisc (both bytes and packets), and
incorrect packet backlog count in netem itself.

Parent backlog goes negative, netem's packet backlog counts
all non-first segments twice (thus remaining non-zero even
after qdisc is emptied).

Move the variables used to count the adjustment into local
scope to make 100% sure they aren't used at any stage in
backports.

Fixes: 6071bd1aa13e ("netem: Segment GSO packets on enqueue")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/mdp5: Fix mdp5_cfg_init error return

[ Upstream commit fc19cbb785d7bbd1a1af26229b5240a3ab332744 ]

If mdp5_cfg_init fails because of an unknown major version, a null pointer
dereference occurs.  This is because the caller of init expects error
pointers, but init returns NULL on error.  Fix this by returning the
expected values on error.

Fixes: 2e362e1772b8 (drm/msm/mdp5: introduce mdp5_cfg module)
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/pseries/mobility: rebuild cacheinfo hierarchy post-migration

[ Upstream commit e610a466d16a086e321f0bd421e2fc75cff28605 ]

It's common for the platform to replace the cache device nodes after a
migration. Since the cacheinfo code is never informed about this, it
never drops its references to the source system's cache nodes, causing
it to wind up in an inconsistent state resulting in warnings and oopses
as soon as CPU online/offline occurs after the migration, e.g.

  cache for /cpus/l3-cache@3113(Unified) refers to cache for /cpus/l2-cache@200d(Unified)
  WARNING: CPU: 15 PID: 86 at arch/powerpc/kernel/cacheinfo.c:176 release_cache+0x1bc/0x1d0
  [...]
  NIP release_cache+0x1bc/0x1d0
  LR  release_cache+0x1b8/0x1d0
  Call Trace:
    release_cache+0x1b8/0x1d0 (unreliable)
    cacheinfo_cpu_offline+0x1c4/0x2c0
    unregister_cpu_online+0x1b8/0x260
    cpuhp_invoke_callback+0x114/0xf40
    cpuhp_thread_fun+0x270/0x310
    smpboot_thread_fn+0x2c8/0x390
    kthread+0x1b8/0x1c0
    ret_from_kernel_thread+0x5c/0x68

Using device tree notifiers won't work since we want to rebuild the
hierarchy only after all the removals and additions have occurred and
the device tree is in a consistent state. Call cacheinfo_teardown()
before processing device tree updates, and rebuild the hierarchy
afterward.

Fixes: 410bccf97881 ("powerpc/pseries: Partition migration in the kernel")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/cacheinfo: add cacheinfo_teardown, cacheinfo_rebuild

[ Upstream commit d4aa219a074a5abaf95a756b9f0d190b5c03a945 ]

Allow external callers to force the cacheinfo code to release all its
references to cache nodes, e.g. before processing device tree updates
post-migration, and to rebuild the hierarchy afterward.

CPU online/offline must be blocked by callers; enforce this.

Fixes: 410bccf97881 ("powerpc/pseries: Partition migration in the kernel")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qed: iWARP - Use READ_ONCE and smp_store_release to access ep->state

[ Upstream commit 6117561e1bb30b2fe7f51e1961f34dbedd0bec8a ]

Destroy QP waits for it's ep object state to be set to CLOSED
before proceeding. ep->state can be updated from a different
context. Add smp_store_release/READ_ONCE to synchronize.

Fixes: fc4c6065e661 ("qed: iWARP implement disconnect flows")
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/vt-d: Duplicate iommu_resv_region objects per device list

[ Upstream commit 5f64ce5411b467f1cfea6c63e2494c22b773582b ]

intel_iommu_get_resv_regions() aims to return the list of
reserved regions accessible by a given @device. However several
devices can access the same reserved memory region and when
building the list it is not safe to use a single iommu_resv_region
object, whose container is the RMRR. This iommu_resv_region must
be duplicated per device reserved region list.

Let's remove the struct iommu_resv_region from the RMRR unit
and allocate the iommu_resv_region directly in
intel_iommu_get_resv_regions(). We hold the dmar_global_lock instead
of the rcu-lock to allow sleeping.

Fixes: 0659b8dc45a6 ("iommu/vt-d: Implement reserved region get/put callbacks")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mpls: fix warning with multi-label encap

[ Upstream commit 2f3f7d1fa0d1039b24a55d127ed190f196fc3e79 ]

If you configure a route with multiple labels, e.g.
  ip route add 10.10.3.0/24 encap mpls 16/100 via 10.10.2.2 dev ens4
A warning is logged:
  kernel: [  130.561819] netlink: 'ip': attribute type 1 has an invalid
  length.

This happens because mpls_iptunnel_policy has set the type of
MPLS_IPTUNNEL_DST to fixed size NLA_U32.
Change it to a minimum size.
nla_get_labels() does the remaining validation.

Fixes: e3e4712ec096 ("mpls: ip tunnel support")
Signed-off-by: George Wilkie <gwilkie@vyatta.att-mail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: vivid: fix incorrect assignment operation when setting video mode

[ Upstream commit d4ec9550e4b2d2e357a46fdc65d8ef3d4d15984c ]

The assigment of FB_VMODE_NONINTERLACE to var->vmode should be a
bit-wise or of FB_VMODE_NONINTERLACE instead of an assignment,
otherwise the previous clearing of the FB_VMODE_MASK bits of
var->vmode makes no sense and is redundant.

Addresses-Coverity: ("Unused value")
Fixes: ad4e02d5081d ("[media] vivid: add a simple framebuffer device for overlay testing")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: brcmstb-avs-cpufreq: Fix types for voltage/frequency

[ Upstream commit 4c5681fcc684c762b09435de3e82ffeee7769d21 ]

What we read back from the register is going to be capped at 32-bits,
and cpufreq_freq_table.frequency is an unsigned int. Avoid any possible
value truncation by using the appropriate return value.

Fixes: de322e085995 ("cpufreq: brcmstb-avs-cpufreq: AVS CPUfreq driver for Broadcom STB SoCs")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: brcmstb-avs-cpufreq: Fix initial command check

[ Upstream commit 22a26cc6a51ef73dcfeb64c50513903f6b2d53d8 ]

There is a logical error in brcm_avs_is_firmware_loaded() whereby if the
firmware returns -EINVAL, we will be reporting this as an error. The
comment is correct, the code was not.

Fixes: de322e085995 ("cpufreq: brcmstb-avs-cpufreq: AVS CPUfreq driver for Broadcom STB SoCs")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netvsc: unshare skb in VF rx handler

[ Upstream commit 996ed04741467f6d1552440c92988b132a9487ec ]

The netvsc VF skb handler should make sure that skb is not
shared. Similar logic already exists in bonding and team device
drivers.

This is not an issue in practice because the VF devicex
does not send up shared skb's. But the netvsc driver
should do the right thing if it did.

Fixes: 0c195567a8f6 ("netvsc: transparent VF management")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

inet: frags: call inet_frags_fini() after unregister_pernet_subsys()

[ Upstream commit ae7352d384a552d8c799c242e74a934809990a71 ]

Both IPv6 and 6lowpan are calling inet_frags_fini() too soon.

inet_frags_fini() is dismantling a kmem_cache, that might be needed
later when unregister_pernet_subsys() eventually has to remove
frags queues from hash tables and free them.

This fixes potential use-after-free, and is a prereq for the following patch.

Fixes: d4ad4d22e7ac ("inet: frags: use kmem_cache for inet_frag_queue")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

signal/cifs: Fix cifs_put_tcp_session to call send_sig instead of force_sig

[ Upstream commit 72abe3bcf0911d69b46c1e8bdb5612675e0ac42c ]

The locking in force_sig_info is not prepared to deal with a task that
exits or execs (as sighand may change).  The is not a locking problem
in force_sig as force_sig is only built to handle synchronous
exceptions.

Further the function force_sig_info changes the signal state if the
signal is ignored, or blocked or if SIGNAL_UNKILLABLE will prevent the
delivery of the signal.  The signal SIGKILL can not be ignored and can
not be blocked and SIGNAL_UNKILLABLE won't prevent it from being
delivered.

So using force_sig rather than send_sig for SIGKILL is confusing
and pointless.

Because it won't impact the sending of the signal and and because
using force_sig is wrong, replace force_sig with send_sig.

Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Jeff Layton <jlayton@primarydata.com>
Cc: Steve French <smfrench@gmail.com>
Fixes: a5c3e1c725af ("Revert "cifs: No need to send SIGKILL to demux_thread during umount"")
Fixes: e7ddee9037e7 ("cifs: disable sharing session and tcon and add new TCP sharing code")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu: Use right function to get group for device

[ Upstream commit 57274ea25736496ee019a5c40479855b21888839 ]

The iommu_group_get_for_dev() will allocate a group for a
device if it isn't in any group. This isn't the use case
in iommu_request_dm_for_dev(). Let's use iommu_group_get()
instead.

Fixes: d290f1e70d85a ("iommu: Introduce iommu_request_dm_for_dev()")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

misc: sgi-xp: Properly initialize buf in xpc_get_rsvd_page_pa

[ Upstream commit b0576f9ecb5c51e9932531d23c447b2739261841 ]

Clang warns:

drivers/misc/sgi-xp/xpc_partition.c:73:14: warning: variable 'buf' is
uninitialized when used within its own initialization [-Wuninitialized]
        void *buf = buf;
              ~~~   ^~~
1 warning generated.

Arnd's explanation during review:

  /*
   * Returns the physical address of the partition's reserved page through
   * an iterative number of calls.
   *
   * On first call, 'cookie' and 'len' should be set to 0, and 'addr'
   * set to the nasid of the partition whose reserved page's address is
   * being sought.
   * On subsequent calls, pass the values, that were passed back on the
   * previous call.
   *
   * While the return status equals SALRET_MORE_PASSES, keep calling
   * this function after first copying 'len' bytes starting at 'addr'
   * into 'buf'. Once the return status equals SALRET_OK, 'addr' will
   * be the physical address of the partition's reserved page. If the
   * return status equals neither of these, an error as occurred.
   */
  static inline s64
  sn_partition_reserved_page_pa(u64 buf, u64 *cookie, u64 *addr, u64 *len)

  so *len is set to zero on the first call and tells the bios how many
  bytes are accessible at 'buf', and it does get updated by the BIOS to
  tell us how many bytes it needs, and then we allocate that and try again.

Fixes: 279290294662 ("[IA64-SGI] cleanup the way XPC locates the reserved page")
Link: https://github.com/ClangBuiltLinux/linux/issues/466
Suggested-by: Stephen Hines <srhines@google.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: stm32: fix wakeup source initialization

[ Upstream commit 5297f274e8b61ceb9676cba6649d3de9d03387ad ]

Fixes dedicated_irq_wakeup issue and deactivated uart as wakeup source by
default.

Fixes: 270e5a74fe4c ("serial: stm32: add wakeup mechanism")
Signed-off-by: Erwan Le Ray <erwan.leray@st.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: stm32: Add support of TC bit status check

[ Upstream commit 64c32eab660386f9904bb295a104c9c425e9f8b2 ]

Adds a check on the Transmission Complete bit status before closing the
com port. Prevents the port closure before the end of the transmission.
TC poll loop is moved from stm32_tx_dma_complete to stm32_shutdown
routine, in order to check TC before shutdown in both dma and
PIO tx modes.
TC clear is added in stm32_transmit_char routine, in order to be cleared
before transmitting in both dma and PIO tx modes.

Fixes: 3489187204eb ("serial: stm32: adding dma support")
Signed-off-by: Erwan Le Ray <erwan.leray@st.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: stm32: fix transmit_chars when tx is stopped

[ Upstream commit b83b957c91f68e53f0dc596e129e8305761f2a32 ]

Disables the tx irq  when the transmission is ended and updates stop_tx
conditions for code cleanup.

Fixes: 48a6092fb41f ("serial: stm32-usart: Add STM32 USART Driver")
Signed-off-by: Erwan Le Ray <erwan.leray@st.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>