drm: dw-hdmi: add specific I2S and AHB functions for stream handling

Currently, CTS+N is forced to zero as a workaround of the IP block for
i.MX platforms. This is requested in the datasheet of the corresponding
IP for AHB mode only. However, we have seen that it introduces glitches
or delays when playing a sound on HDMI for I2S mode. This proves that we
cannot keep the current functions for handling audio stream as-is if
these contain workaround that are specific to a mode.

This commit introduces two callbacks, one for each variant.
dw_hdmi_setup defines the right function depending on the detected
variant. Then, the exported functions dw_hdmi_audio_enable and
dw_hdmi_audio_disable calls the corresponding callbacks

Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Romain Perier <romain.perier@collabora.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170414083113.4255-2-romain.perier@collabora.com

drm/vc4: Allow using more than 256MB of CMA memory.

Until now, we've had to limit Raspberry Pi to 256MB of CMA memory to
keep from triggering the hardware addressing bug between the tile
binner and the tile alloc memory (where the top 4 bits come from the
tile state data array's address).

To work around that and allow more memory to be reserved for graphics,
allocate a single BO to store tile state data arrays and tile
alloc/overflow memory while the GPU is active, and make sure that that
one BO doesn't happen to cross a 256MB boundary.  With that in place,
we can allocate textures and shaders anywhere in system memory (still
contiguous, of course).

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170327231025.19391-1-eric@anholt.net
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>

drm/vc4: Fix refcounting of runtime PM get if it errors out.

We were returning without decrementing if the error happened, meaning
that at the next submit we wouldn't try to bring up the power domain.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170417162603.12726-1-eric@anholt.net
Reviewed-by: Sean Paul <seanpaul@chromium.org>

drm/vc4: Add runtime PM support to the HDMI encoder driver

The HDMI driver is currently enabling all clocks at probe time and
keeps the power-domain connected to the HDMI encoder enabled.

Move all activation code to vc4_hdmi_encoder_enable() and make sure
the clks and power domain are released when the HDMI encoder is not used
by adding deactivation steps in vc4_hdmi_encoder_disable().

Note that the sequencing imposed by the IP requires that we move
vc4_hdmi_encoder_mode_set() code into vc4_hdmi_encoder_enable().

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>

drm/cma: Fix recent regression of mmap() in the MMU case.

The stub get_unmapped_area() function was actually getting called, so
all of our mmap()s failed.

Cc: Yannick Fertre <yannick.fertre@st.com>
Fixes: 97bf3a9aa60f ("drm/cma: Update DEFINE_DRM_GEM_CMA_FOPS to add get_unmapped_area")
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170417233124.18420-1-eric@anholt.net
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/cma-helper: Return ENOENT for "no such gem obj"

All the error codes we (ab)use are strictly not the right ones (since
they're all for the vfs, and the only thing we're allowed to do from
an ioctl is EINVAL). But ENOENT is the common error code for failed to
look up an object throughout drm, so let's use it in the cma helpers,
too.

Note that this does change uabi for some drivers, but that shouldn't
ba a problem:
- other drivers (e.g. i915) already return ENOENT for invalid gem bo
- userspace tends to only check for errors, not specific ones (except
  when ioctl restarting is needed)
- if the gem bo isn't there a previous step (either creating or
  importing it) failed already, this situation should always be a
  userspace bug.

Changing it does help with debugging userspace bugs though, by making
error reporting more consistent.

Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170418121120.31862-1-daniel.vetter@ffwll.ch

sync_file: get rid of internal reference count.

sync_file uses the reference count of the file, the internal
kref was never getting moved past 1.

We can reintroduce this if we decide we need it later.

[airlied: fix buildbot warnings]

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170413014144.637-2-airlied@gmail.com

drm/doc: Interlink color manager docs better

Motivated by a request from Eric.

v2: Take in suggestions from Lionel

Cc: Eric Anholt <eric@anholt.net>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170412152006.12233-1-daniel.vetter@ffwll.ch

MAINTAINERS: add maintainers for DRM STM driver

Add Philippe Cornu and myself as maintainers.

Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/1492164819-10513-6-git-send-email-yannick.fertre@st.com
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

drm/stm: Add STM32 LTDC driver

This controller provides output signals to interface directly a variety
of LCD and TFT panels. These output signals are: RGB signals
(up to 24bpp), vertical & horizontal synchronisations, data enable and
the pixel clock.

Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/1492164819-10513-5-git-send-email-yannick.fertre@st.com
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

dt-bindings: display: Add STM32 LTDC driver

This patch adds documentation of device tree bindings for the STM32 LTDC
(Lcd-Tft Display Controller).

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/1492164819-10513-4-git-send-email-yannick.fertre@st.com

drm/fb-cma-helper: Add drm_fb_cma_get_gem_addr()

Add function drm_fb_cma_get_gem_addr() which return the physical address
of framebuffer (1st pixel). This function will usually be called by plane
callback (atomic_update).

Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/1492164819-10513-3-git-send-email-yannick.fertre@st.com
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

drm/cma: Update DEFINE_DRM_GEM_CMA_FOPS to add get_unmapped_area

Missing field get_unmapped_area which is necessary with device without MMU

Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/1492164819-10513-2-git-send-email-yannick.fertre@st.com
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

drm/vc4: Expose dma-buf fences for V3D rendering.

This is needed for proper synchronization with display on another DRM
device (pl111 or tinydrm) with buffers produced by vc4 V3D.  Fixes the
new igt vc4_dmabuf_poll testcase, and rendering of one of the glmark2
desktop tests on pl111+vc4.

This doesn't yet introduce waits on another device's fences before
vc4's rendering/display, because I don't have testcases for them.

v2: Reuse dma_fence_free(), retitle commit message to clarify that
    it's not a full dma-buf fencing implementation yet.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170412191202.22740-6-eric@anholt.net
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/bridge: sii902x: Add missing \n to the end of some dev_err messages

Trivial fix.
Some dev_err messages in this driver are missing \n, so add them.

Signed-off-by: Liu Ying <gnuiyl@gmail.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1491877339-19913-1-git-send-email-gnuiyl@gmail.com

drm/doc: Fix missing @ctx documentation

Forgot to add this :(

Fixes: 1931529448bc ("drm: Add acquire ctx parameter to ->plane_disable")
Cc: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170413074007.7620-1-daniel.vetter@ffwll.ch

drm: fix spelling mistake: "committing"

Trivial fix to spelling mistake in DRM_DEBUG_ATOMIC debug message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170412162722.25087-1-colin.king@canonical.com

MAINTAINERS: Update maintainers/reviewers for bridge drivers

Add Laurent as a reviewer and Andrzej as a maintainer for DRM bridge chip
drivers. They actively review and contribute to bridge drivers and the
bridge API.

Acked-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170410063641.17704-1-architt@codeaurora.org

Revert "drm: Don't allow interruptions when opening debugfs/crc"

This reverts

commit b8dfa821c27046ede9bf8eb14cc8109d379428e9
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Fri Apr 7 12:17:12 2017 +0100
    drm: Don't allow interruptions when opening debugfs/crc

It reportedly breaks things, so let's revert now and try again later.

Fixes: b8dfa821c270 ("drm: Don't allow interruptions when opening debugfs/crc")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>

drm: Only take cursor locks when the cursor plane exists

I thought I've fixed this, but maybe not. Anyway, clearly broken, and
easy fix.

Cc: Tony Lindgren <tony@atomide.com>
Reported-by: Tony Lindgren <tony@atomide.com>
Fixes: b95ff0319a82 ("drm: Remove drm_modeset_(un)lock_crtc")
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170407164817.28272-1-daniel.vetter@ffwll.ch

drm/vmwgfx: Fix fbdev emulation using legacy functions

I've broken this by removing the backoff handling from the
set_config2atomic helper in

commit 38b6441e4e75c0b319cfe4d9364c1059fc1e3c2b
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Wed Mar 22 22:50:58 2017 +0100

    drm/atomic-helper: Remove the backoff hack from set_config

Fixing this properly would mean we get to wire the acquire_ctx all the
way through vmwgfx fbdev code, and doing the same was tricky for the
shared fbdev layer. Probably much better to look into refactoring the
entire code to use the helpers, but since that's not a viable
long-term solution fix the issue by open-coding a vmwgfx version of
set_config, that does the legacy backoff dance internally.

Note: Just compile-tested. The idea is to take
drm_mode_set_config_internal(), remove the "is this a legacy driver"
check, and whack the drm_atomic_legacy_backoff trickery at the end.
Since drm_atomic_legacy_backoff is for atomic commits only we need to
open-code it.

Cc: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170406200256.26040-1-daniel.vetter@ffwll.ch

drm/rockchip: Shutdown all crtcs when unbinding drm

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1491481885-13775-12-git-send-email-jeffy.chen@rock-chips.com

drm/rockchip: Reorder drm bind/unbind sequence

Current drm bind/unbind sequence would cause some memory issues.
For example we should not cleanup iommu before cleanup mode config.

Reorder bind/unbind sequence, follow exynos drm.

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
[seanpaul fixed spelling typo in commit subject]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1491481885-13775-11-git-send-email-jeffy.chen@rock-chips.com

drm/rockchip: analogix_dp: Disable clock when unbinding

The clock is enabled when binding cdn dp.

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1491481885-13775-10-git-send-email-jeffy.chen@rock-chips.com

drm/rockchip: vop: Unprepare clocks when unbinding

The clocks are prepared when binding vop.

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1491481885-13775-9-git-send-email-jeffy.chen@rock-chips.com

drm/rockchip: vop: Enable pm domain before vop_initial

We're trying to access vop registers here, so need to make sure
the pm domain is on.

Normally it should be enabled by the bootloader, but there's no
guarantee of it. And if we wanna do unbind/bind, it would also
cause the device to hang.

And this patch also does these:
1/ move vop_initial to the end of vop_bind for eaiser error handling.
2/ correct the err_put_pm_runtime of vop_enable.

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1491481885-13775-8-git-send-email-jeffy.chen@rock-chips.com

drm/rockchip: cdn-dp: Don't unregister audio dev when unbinding

After snd_soc_unregister_codec, the dai link would remain bound to
the invalid codec. That would cause crashes after unbind dp driver.

Let's unregister audio codec when removing dp driver to prevent that.

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1491481885-13775-7-git-send-email-jeffy.chen@rock-chips.com

drm/rockchip: cdn-dp: Don't try to release firmware when not loaded

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1491481885-13775-6-git-send-email-jeffy.chen@rock-chips.com

drm: bridge: analogix: Destroy connector & encoder when unbinding

Normally we do this in drm_mode_config_cleanup. But:
1/ analogix dp's connector is allocated in bind, and freed after unbind.
So we need to destroy it in unbind to avoid further access.
2/ the drm bridge is attached in bind, and detached in encoder cleanup.
So we need to destroy encoder in unbind.

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1491481885-13775-5-git-send-email-jeffy.chen@rock-chips.com

drm: bridge: analogix: Disable clock when unbinding

The clock is enabled when binding analogix dp.

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1491481885-13775-4-git-send-email-jeffy.chen@rock-chips.com

drm: bridge: analogix: Unregister dp aux when unbinding

The dp aux is registered when binding analogix dp.

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1491481885-13775-3-git-send-email-jeffy.chen@rock-chips.com

drm: bridge: analogix: Detach panel when unbinding analogix dp

The panel is attached when binding analogix dp.

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1491481885-13775-2-git-send-email-jeffy.chen@rock-chips.com

drm: Don't allow interruptions when opening debugfs/crc

The code does not like to be interrupted when waiting for the first
vblank after opening a debugfs/crc channel, so don't.

[66285.716870] WARNING: CPU: 1 PID: 16615 at drivers/gpu/drm/drm_debugfs_crc.c:185 crtc_crc_open+0x1d0/0x1f0 [drm]
[66285.716877] Modules linked in: i915 intel_powerclamp crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel cryptd intel_gtt i2c_algo_bit lpc_ich mfd_core drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops prime_numbers drm video button autofs4 sd_mod ahci libahci libata i2c_i801 scsi_mod i2c_designware_platform i2c_designware_core i2c_core
[66285.716929] CPU: 1 PID: 16615 Comm: kms_frontbuffer Not tainted 4.11.0-rc5+ #7
[66285.716935] Hardware name: GIGABYTE GB-BXBT-1900/MZBAYAB-00, BIOS F8 03/02/2016
[66285.716941] Call Trace:
[66285.716955]  dump_stack+0x4d/0x6f
[66285.716966]  __warn+0xc1/0xe0
[66285.716975]  warn_slowpath_null+0x18/0x20
[66285.717004]  crtc_crc_open+0x1d0/0x1f0 [drm]
[66285.717014]  ? wake_atomic_t_function+0x50/0x50
[66285.717024]  full_proxy_open+0xf0/0x1b0
[66285.717032]  ? full_proxy_release+0x80/0x80
[66285.717042]  do_dentry_open.isra.17+0x14b/0x2d0
[66285.717051]  vfs_open+0x42/0x60
[66285.717064]  path_openat+0x5e7/0x13d0
[66285.717074]  ? refcount_dec_and_test+0x11/0x20
[66285.717081]  ? down_read+0xd/0x30
[66285.717087]  do_filp_open+0x85/0xf0
[66285.717093]  ? __vfs_write+0x23/0x120
[66285.717100]  ? __alloc_fd+0x3a/0x170
[66285.717107]  do_sys_open+0x11e/0x1f0
[66285.717113]  ? do_sys_open+0x11e/0x1f0
[66285.717119]  SyS_openat+0xf/0x20
[66285.717125]  entry_SYSCALL_64_fastpath+0x17/0x98
[66285.717131] RIP: 0033:0x7f5f2235146a
[66285.717135] RSP: 002b:00007ffd892e6bc0 EFLAGS: 00000246 ORIG_RAX: 0000000000000101
[66285.717142] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f5f2235146a
[66285.717147] RDX: 0000000000000000 RSI: 00007ffd892e6c40 RDI: 0000000000000006
[66285.717151] RBP: 00007ffd892e6b20 R08: 0000000000000000 R09: 000000000000000f
[66285.717156] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001
[66285.717161] R13: 00007ffd892e6b10 R14: 0000000000000004 R15: 00000000007e61f4

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100610
Fixes: e8fa5671183c ("drm: crc: Wait for a frame before returning from open()")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170407111712.13962-1-chris@chris-wilson.co.uk

drm/virtio: don't leak bo on drm_gem_object_init failure

Reported-by: 李强 <liqiang6-s@360.cn>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170406155941.458-1-kraxel@redhat.com

drm: bridge: dw-hdmi: fix input format/encoding from plat_data

The plat_data->input_bus_format and plat_data->input_bus_encoding
are unsigned long and are always >=0, but the value 0 was still
considered as RGB888 for input_bus_format and default color space
for input_bus_encoding in the reworked code.

This patch changes the if statement check for a non-zero value to
either use the default input bus_format and/or bus_encoding for a zero
value and the provided bus_format and/or bus_encoding for a
non zero value.

Thanks to Dan Carpenter for his bug report at [1].

Tested on Amlogic P230 (with CSC enabled for YUV444 to RGB) and Rockchip
RK3288 ACT8846 EVB Board (no CSC involved, direct RGB passthrough).

[1] http://lkml.kernel.org/r/20170406052120.GA26578@mwanda

Cc: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: def23aa7e982 ("drm: bridge: dw-hdmi: Switch to V4L bus format and encodings")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
[narmstrong@baylibre.com: reworded commit message and added Fixes tag]
Link: http://patchwork.freedesktop.org/patch/msgid/1491471244-24989-1-git-send-email-narmstrong@baylibre.com

drm: omap: use common OF graph helpers

The OMAP driver has its own OF graph helpers that are similar to the
common helpers. This commit replaces most of the calls with the common
helpers. There's still a couple of custom helpers left, but the driver
needs more extensive changes to get rid of them.

In dss_init_ports, we invert the loop, looping through the known ports
and matching them to DT nodes rather than looping thru DT nodes and
matching them to the ports.

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>

drm: convert drivers to use drm_of_find_panel_or_bridge

Similar to the previous commit, convert drivers open coding OF graph
parsing to use drm_of_find_panel_or_bridge instead.

This changes some error messages to debug messages (in the graph core).
Graph connections are often "no connects" depending on the particular
board, so we want to avoid spurious messages. Plus the kernel is not a
DT validator.

Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
[seanpaul dropped rockchip changes since they're now obsolete]
Signed-off-by: Sean Paul <seanpaul@chromium.org>

drm: convert drivers to use of_graph_get_remote_node

Convert drivers to use the new of_graph_get_remote_node() helper
instead of parsing the endpoint node and then getting the remote device
node. Now drivers can just specify the device node and which
port/endpoint and get back the connected remote device node. The details
of the graph binding are nicely abstracted into the core OF graph code.

This changes some error messages to debug messages (in the graph core).
Graph connections are often "no connects" depending on the particular
board, so we want to avoid spurious messages. Plus the kernel is not a
DT validator.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Liviu Dudau <liviu.dudau@arm.com>
Tested-by: Eric Anholt <eric@anholt.net>
Tested-by: Jyri Sarha <jsarha@ti.com>
Tested by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>

drm: of: introduce drm_of_find_panel_or_bridge

Many drivers have a common pattern of searching the OF graph for either an
attached panel or bridge and then finding the DRM struct for the panel
or bridge. Also, most drivers need to handle deferred probing when the
DRM device is not yet instantiated. Create a common function,
drm_of_find_panel_or_bridge, to find the connected node and the
associated DRM panel or bridge device.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
[seanpaul dropped extern from drm_of.h]
Signed-off-by: Sean Paul <seanpaul@chromium.org>

drm: make of_drm_find_panel also depend on CONFIG_DRM_PANEL

For drm_of_find_panel_or_bridge() added in the next commit, an empty
version of of_drm_find_panel is needed for !CONFIG_DRM_PANEL.

Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Sean Paul <seanpaul@chromium.org>

drm/atomic: Add connector atomic_check function, v2.

The atomic_check function is useful for implementing properties, but
it can be used for other connector modeset related checks as well.

Similar to plane check functions, on a modeset atomic_check() is always
called.

Changes since v1:
- Make sure atomic_check() is called on any modeset.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1491477543-31257-5-git-send-email-maarten.lankhorst@linux.intel.com

drm/atomic: Move enable/connector check up in check_modeset()

Now that handle_conflicting_encoders no longer touches active state,
so there's no need to do the check quite that late any more.

Doing it with all the other checks makes it a lot more clear what the
below block tries to accomplish, and this feels like a better place to
put the check.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1491477543-31257-4-git-send-email-maarten.lankhorst@linux.intel.com

drm/atomic: Set all the changed flags in one place.

Now that handle_conflicting_encoders cannot disable crtc's any more
it makes sense to set all the changed flags in 1 place.
This makes the code slightly less magical.

The (now removed) comment is out of date. The only reason the
active_changed was set late was because handle_conflicting_encoders
could disable connectors. This is no longer the case,
and we can put everything in 1 place.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1491477543-31257-3-git-send-email-maarten.lankhorst@linux.intel.com

drm/atomic: Unify conflicting encoder handling.

Currently we use a flag to change behavior in atomic commit
whether a conflicting encoder should be enabled or disabled.
This is used for the legacy set_config helper, which disables
connectors that have a conflicting encoder but not part of the
active crtc list.

There's no need for this to be handled in atomic commit, it
could be done in the set_config helper instead. This will
let the atomic check function reject any conflicting encoders,
while set_config can disable conflicting crtc's. This makes it
possible to recalculate the changed flags in 1 loop.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1491477543-31257-2-git-send-email-maarten.lankhorst@linux.intel.com

drm: Take mode_config.mutex in setcrtc ioctl

Legacy drivers insist that we really take all the locks in this path,
and the harm in doing so is minimal.

v2: Like git add, it exists :(

Fixes: 2ceb585a956c ("drm: Add explicit acquire ctx handling around ->set_config")
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Cc: Alex Deucher <alexdeucher@gmail.com>
Reported-by: Alex Deucher <alexdeucher@gmail.com>
Acked-and-tested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170406190654.6733-1-daniel.vetter@ffwll.ch

drm/atomic: Acquire connection_mutex lock in drm_helper_probe_single_connector_modes, v4.

mode_valid() called from drm_helper_probe_single_connector_modes()
may need to look at connector->state because what a valid mode is may
depend on connector properties being set. For example some HDMI modes
might be rejected when a connector property forces the connector
into DVI mode.

Some implementations of detect() already lock all state,
so we have to pass an acquire_ctx to them to prevent a deadlock.

This means changing the function signature of detect() slightly,
and passing the acquire_ctx for locking multiple crtc's.
For the callbacks, it will always be non-zero. To allow callers
not to worry about this, drm_helper_probe_detect_ctx is added
which might handle -EDEADLK for you.

Changes since v1:
- Always set ctx parameter.
Changes since v2:
- Always take connection_mutex when probing.
Changes since v3:
- Remove the ctx from intel_dp_long_pulse, and add
  WARN_ON(!connection_mutex) (danvet)
- Update docs to clarify the locking situation. (danvet)

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1491504920-4017-1-git-send-email-maarten.lankhorst@linux.intel.com

drm: virtio: fix virtio_gpu_cursor_formats

When we use virtio-vga with a big-endian guest,
the mouse pointer disappears.

To fix that, on big-endian use DRM_FORMAT_BGRA8888
instead of DRM_FORMAT_ARGB8888.

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170405080915.823-1-lvivier@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm: bridge: dw-hdmi: Add a missing break statement

There was supposed to be a break before the next case statement.

Fixes: def23aa7e982 ("drm: bridge: dw-hdmi: Switch to V4L bus format and encodings")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170406052132.GA26605@mwanda

drm: bridge: dw-hdmi: remove unused hdmi_bus_fmt_is_yuv420

Remove usused yet hdmi_bus_fmt_is_yuv420 function.

Fixes: def23aa7e982 ("drm: bridge: dw-hdmi: Switch to V4L bus format and encodings")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1491377579-9353-1-git-send-email-narmstrong@baylibre.com

drm/fb-helper: Extract _legacy kms functions

The goal is to push all the kms locking down into these separate
_atomic and _legacy functions, so that we can correctly pass the
acquire ctx into all atomic drivers. Instead of playing games with
hidden ctx in mode_config.acquire_ctx. All the fbdev state will be
protected by a new fbdev private lock that Thierry is working on.

This here is just prep by creating a clean split between atomic and
legacy paths, which also simplifies the control flow a bit.

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170403083304.9083-16-daniel.vetter@ffwll.ch

drm: extract legacy framebuffer remove

I got confused every time I audited what that lock_all is doing in
there until realizing it's for legacy kms only. Make that a notch more
obvious by having 2 entirely different paths.

While at it also move the atomic version of this into
drm_framebuffer.c, there's no reason it needs to be in drm_atomic.c.
That way it becomes a simple static function.

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170403083304.9083-15-daniel.vetter@ffwll.ch

drm/atomic-helper: Remove legacy backoff hack from gamma_set

Another one knocked down.

With this we can also remove the temporary hack in the gamma_set
ioctl.

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170403083304.9083-14-daniel.vetter@ffwll.ch

drm: Add acquire ctx to ->gamma_set hook

Atomic helpers really want this instead of the hacked-up legacy
backoff trick, which unfortunately prevents drivers from using their
own private drm_modeset_locks.

Aside: There's a few atomic drivers (nv50, vc4, soon vmwgfx) which
don't yet use the new atomic color mgmt/gamma table stuff. Would be
nice if they could switch over and just hook up
drm_atomic_helper_legacy_gamma_set() instead.

Cc: Dave Airlie <airlied@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Eric Anholt <eric@anholt.net>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170403083304.9083-13-daniel.vetter@ffwll.ch

drm: Add explicit acquire ctx handling around ->gamma_set

Just the groundwork to prepare for adding the acquire cxt parameter to
the ->gamma_set hook. Again we need a temporary hack to fill out
mode_config.acquire_ctx until the atomic helpers are switched over.

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170403083304.9083-12-daniel.vetter@ffwll.ch

drm/fb-helper: Give up on kgdb for atomic drivers

It just doesn't work. It probably stopped working way, way before that
(e.g. i915 grabbed random mutexes all over in modeset code at least
since gen6), but with atomic and all the ww_mutex stuff it's indeed
hopeless.

Remove ->mode_set_base_atomic from the 2 atomic drivers (i915 and
nouveau) that still had one (both had dummy implementations already
anyway), and shunt atomic drivers in the helpers debug_enter/leave
functions.

I'll leave the code in for radeon and amdgpu, but I think as soon as
amdgpu is atomic we should think about just ripping it out. Only
having it around for radeon and pre-nv50 is rather pointless. This
would also allow us to nuke all that code from fbdev.

Funny part is that _all_ kms drivers set this hook, despite that no
one else provides the required ->mode_set_base_atomic implementation.

The reason I'm jumping on this is that I want to wire up a full
acquire ctx for the benefit of atomic drivers, everywhere. And the
debug_enter/leave implementations call ->gamma_set. And there's just
no way ever we can create an acquire_ctx in the nmi context of kgdb.

Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170403083304.9083-11-daniel.vetter@ffwll.ch

drm/i915: Nuke intel_atomic_legacy_gamma_set

We do set DRIVER_ATOMIC now.

Note that the comment is outdated, the property paths switched over to
checking drm_drv_uses_atomic_modeset() a while ago. Which means this
can't even break if we revert DRIVER_ATOMIC again.

v2: Add note that this is even safer (Maarten).

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170403083304.9083-9-daniel.vetter@ffwll.ch

drm: Only take crtc lock in get_gamma ioctl

We don't call into drivers at all here, this is enough. Also, we can
reduce the critical section a bit to simplify the code.
crtc->gamma_size is set up once at driver load and then invariant, so
also doesn't need any protection.

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170403083304.9083-8-daniel.vetter@ffwll.ch

drm: Drop modeset_lock_all from the getproperty ioctl

Properties, i.e. the struct drm_property specifying the type and value
range of a property, not the instantiation on a given object, are
invariant over the lifetime of a driver.

Hence no locking at all is needed, we can just remove it.

While at it give the function some love and simplify it, to get it
under the 80 char limit:
- Straighten the loops to reduce the nesting.
- use u64_to_user_ptr casting helper
- use put_user for fixed u64 copies.

Note there's a small behavioural change in that we now copy parts of
the values to userspace if the arrays are a bit too small. Since
userspace will immediately retry anyway, this doesn't matter.

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170403083304.9083-7-daniel.vetter@ffwll.ch

drm: drop modeset_lock_all from drm_state_info

If we push the locks down we don't have to take them all at the same
time.

Aside: Making dump_info fully safe should be fairly simple, if we
protect the ->state pointers with rcu. Simply putting a
synchronize_rcu() into the drm_atomic_state free function should be
all that's roughly needed. Well except we shouldn't block in there, so
better to put that into a work_struct. But I've not set out to fix
that little issue.

Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170403083304.9083-6-daniel.vetter@ffwll.ch

drm/atomic-helper: remove modeset_lock_all from helper_resume

Atomic code rely shouldn't rely on the magic hidden acquire context.

v2: Remove unused config local var (gcc).

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170403083304.9083-5-daniel.vetter@ffwll.ch

drm: Remove drm_modeset_legacy_acquire_ctx and crtc->acquire_ctx

With all the callers of drm_modeset_lock_crtc gone, and all the places
it was formerly used properly wiring the acquire ctx through, we can
remove this.

The only hidden context magic we still have is now the global one.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170403083304.9083-4-daniel.vetter@ffwll.ch

drm: Remove drm_modeset_(un)lock_crtc

The last user, the cursor ioctl, can just open-code this too. We
simply have to move the acquire ctx dance from the universal function
up into the top-level ioctl handler.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170403083304.9083-3-daniel.vetter@ffwll.ch

drm: Make drm_modeset_lock_crtc internal

This is only for legacy paths that need to grab the crtc/plane lock
combo. If you want to lock a crtc, just use drm_modeset_lock().

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170403083304.9083-2-daniel.vetter@ffwll.ch

drm: Pass CRTC ID in userspace vblank events

With the atomic API, it is possible that a single commit affects
multiple crtcs. If the user requests an event with that commit, one
event will be sent for each CRTC, but it is not possible to distinguish
which crtc an event is for in user space. To solve this, the reserved
field in struct drm_vblank_event is repurposed to include the crtc_id
which the event is for.

The DRM_CAP_CRTC_IN_VBLANK_EVENT is added to allow userspace to query if
the crtc field will be set properly.

[daniels: Rebased, using Maarten's forward-port.]

Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Daniel Stone <daniels@collabora.com>
Cc: Maarten Lankhorst <maarten.lankhorst@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170404165221.28240-2-daniels@collabora.com

drm/doc: Small markup fixup

Drive-by cleanup.

Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170404095304.17599-11-daniel.vetter@ffwll.ch

drm: document drm_ioctl.[hc]

Also unify/merge with the existing stuff.

I was a bit torn where to put this, but in the end I decided to put
all the ioctl/sysfs/debugfs stuff into drm-uapi.rst. That means we
have a bit a split with the other uapi related stuff used internally,
like drm_file.[hc], but I think overall this makes more sense.

If it's too confusing we can always add more cross-links to make it
more discoverable. But the auto-sprinkling of links kernel-doc already
does seems sufficient.

Also for prettier docs and more cross-links, switch the internal
defines over to an enum, as usual.

v2: Update kerneldoc fro drm_compat_ioctl too (caught by 0day), plus a
bit more drive-by polish.

v3: Fix typo, spotted by xerpi on irc (Sergi).

v4: Add missing space in comment (Neil).

Cc: Sergi Granell <xerpi.g.12@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170404095304.17599-4-daniel.vetter@ffwll.ch

drm: Consolidate and document sysfs support

- remove docs for internal func, doesn't add value
- add short overview snippet instead explaining that drivers don't
  have to bother themselves with reg/unreg concerns
- drop the ttm comment about drmP.h, drmP.h is disappearing ...

Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170404095304.17599-2-daniel.vetter@ffwll.ch

drm: update todo.rst

Just drive-by, but we have gsoc running so better to update it now.

Great news is that two entries can be removed because essentially all
done.

v2: Keep a bunch of the todos, Gabriel is working on them.

Cc: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170404095304.17599-1-daniel.vetter@ffwll.ch

dt-bindings: display: rk3288-mipi-dsi: add reset property

This reset is required in order to fully reset the internal state of the
MIPI controller.

Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170303113945.3bd2cbd9.john@metanate.com

MAINTAINERS: update files for Amlogic DRM Driver

This patch adds the dw-hdmi bindings and RST kerneldoc to maintained files.

Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1491308131-22071-2-git-send-email-narmstrong@baylibre.com

drm/meson: Add RST to bring together kerneldoc

Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>

drm/meson: Convert existing documentation to actual kerneldoc

Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>

dt-bindings: Add bindings for the Amlogic Meson dw-hdmi extension

This binding describes the Amlogic Meson specific extension to the
Synopsys Designware HDMI Controller.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>

drm/meson: Add support for HDMI encoder and DW-HDMI bridge + PHY

The Amlogic Meson GXBB/GXL/GXM SoCs embeds a Synopsys DesignWare HDMI TX
Controller with a custom Bridge + PHY around the Controller.

This driver makes uses of all the custom PHY plat data callbacks and enables
the compatible HDMI modes to be configured as a drm_encoder instance.

Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>

drm/meson: Add support for HDMI venc modes and settings

This patch adds support for the supported HDMI Venc modes and add the VPP mux
value to switch to ENCP encoder.

Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>

drm/meson: add support for HDMI clock support

This patchs adds support for the supported HDMI modes clocks frequencies.

Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>

drm/meson: venc_cvbs: no more return -ENODEV if CVBS is not available

Since this is managed now by the components code, if CVBS is not available
and HDMI neither, the drm driver won't bind anyway.

Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>

drm/meson: Add support for components

This patch adds support for optional components connected through the
Device Tree endpoints scheme.

Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>

drm/meson: Add missing HDMI register

Add missing VPU HDMI register.

Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>

drm/meson: Use crtc_state for hdisplay and fix atomic flush/enable sync for vsync commit

Clean the crtc_enable by using the proper crtc_state instead of the state
of the primary plane state data.

Also fix the dependency to commit the plane changes even if enable is called
after the flush.

Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>

drm: bridge: dw-hdmi: Move HPD handling to PHY operations

The HDMI TX controller support HPD and RXSENSE signaling from the PHY
via it's STAT0 PHY interface, but some vendor PHYs can manage these
signals independently from the controller, thus these STAT0 handling
should be moved to PHY specific operations and become optional.

The existing STAT0 HPD and RXSENSE handling code is refactored into
a supplementaty set of default PHY operations that are used automatically
when the platform glue doesn't provide its own operations.

Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1491309119-24220-2-git-send-email-narmstrong@baylibre.com

drm: bridge: dw-hdmi: Add Documentation on supported input formats

This patch adds a new DRM documentation entry and links to the input
format table added in the dw_hdmi header.

Reviewed-by: Archit Taneja <architt@codeaurora.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>

drm: bridge: dw-hdmi: Switch to V4L bus format and encodings

Switch code to use the newly introduced V4L bus formats IDs instead of custom
defines. Also use the V4L encoding defines.

Some display pipelines can only provide non-RBG input pixels to the HDMI TX
Controller, this patch takes the pixel format from the plat_data if provided.

Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>

drm: bridge: dw-hdmi: Extract PHY interrupt setup to a function

In preparation for adding PHY operations to handle RX SENSE and HPD,
group all the PHY interrupt setup code in a single location and extract
it to a separate function.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
[narmstrong: renamed dw_hdmi_fb_registered to dw_hdmi_setup_i2c]
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>

Merge tag 'topic/synopsys-media-formats-2017-04-03' of git://anongit.freedesktop.org/git/drm-misc into drm-misc-next

Media formats for synopsys HDMI  TX Controller

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170403163544.kcw5kk52tgku5xua@art_vandelay

Merge airlied/drm-next into drm-misc-next

Backmerging in order to pull vmwgfx [1] and the new synopsys media
format [2] reqs.

[1]- http://patchwork.freedesktop.org/patch/msgid/20170331233255.GA38850@syeh-m02
[2]- http://patchwork.freedesktop.org/patch/msgid/20170403163544.kcw5kk52tgku5xua@art_vandelay

Signed-off-by: Sean Paul <seanpaul@chromium.org>

drm: virtio: fix virtio_gpu_mode_dumb_create

Lookup format using virtio_gpu_translate_format()
instead of hardcoding it.  Fixes xorg display on
bigendian guests (i.e. ppc64).

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170403070845.10793-3-kraxel@redhat.com

drm: virtio: add virtio_gpu_translate_format

Factors out code, no functional change.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170403070845.10793-2-kraxel@redhat.com

MAINTAINERS: meson-drm: remove useless git repository

Meson DRM is switching to drm-misc, so remove the freedesktop drm/meson-drm
git repository from MAINTAINERS entry.

Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1491292894-9190-1-git-send-email-narmstrong@baylibre.com

Merge tag 'omapdrm-4.12' of git://git./linux/kernel/git/tomba/linux into drm-next

omapdrm changes for 4.12

Main changes include:

* Add support for render nodes.
* Refactor omapdss code to allow multiple DISPC implementations. This is pre-work for DSS6 support.
* Fix replication logic bug, which caused RGB565 fb to be shown too dark on a 24bit display.
* Improve detection of display stack readiness, which should remove the probe order issues.
* Link panel-dpi with its backlight, so that they are turned on/off in sync.
* Fix possibly incorrect setup of sync and data-enable signals.
* Get rid of DRM_OMAP_NUM_CRTCS config option.

* tag 'omapdrm-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (34 commits)
  drm/omap: Major omap_modeset_init() cleanup
  drm/omap: Remove the obsolete #define omap_plane _omap_plane hack
  drm/omap: Fix one ugly indentation style break left by coccinelle
  drm/omap: Rename enum omap_plane to enum omap_plane_id
  drm/omap: Get rid of DRM_OMAP_NUM_CRTCS config option
  drm/omap: fix crash on module unload
  drm/omap: use drm_atomic_helper_shutdown()
  drm/omap: fix display SYNC/DE flags
  drm/omap: dispc: improve debug print of display flags
  drm/omap: displays: panel-dpi: Support for handling backlight devices
  drm/omap: poll only connectors where the connect/disconnect can be checked
  drm/omap: display: Add displays in sorted order to the panel_list
  drm/omap: Use omapdss_stack_is_ready() to check that the display stack is up
  drm/omap: dss: Support for detecting display stack readiness
  drm/omap: dss: Functions to check components in the display/output list
  drm/omap: fix replication logic
  drm/omap: remove unused dispc_wb_enable & dispc_wb_is_enabled
  drm/omap: remove all EXPORT_SYMBOLs from dispc.c
  drm/omap: use dispc_ops
  drm/omap: fill dispc_ops
  ...

dma-buf: align debugfs output

Align the heading with the values output from debugfs.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/E1cttOq-0006GX-U7@rmk-PC.armlinux.org.uk

documentation: media: Add documentation for new RGB and YUV bus formats

Add documentation for added Bus Formats to describe RGB and YUV formats used
as input to the Synopsys DesignWare HDMI TX Controller.

Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Acked-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1491230558-10804-4-git-send-email-narmstrong@baylibre.com

media: uapi: Add RGB and YUV bus formats for Synopsys HDMI TX Controller

In order to describe the RGB and YUV bus formats used to feed the
Synopsys DesignWare HDMI TX Controller, add missing formats to the
list of Bus Formats.

Documentation for these formats is added in a separate patch.

Reviewed-by: Archit Taneja <architt@codeaurora.org>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1491230558-10804-3-git-send-email-narmstrong@baylibre.com

drm/omap: Major omap_modeset_init() cleanup

Cleanup overly complex omap_modeset_init(). The function is trying to
support many unusual configuration, that have never been tested and
are not supported by other parts of the dirver.

After cleanup the init function creates exactly one connector,
encoder, crtc, and primary plane per each connected dss-device. Each
connector->encoder->crtc chain is expected to be separate and each
crtc is connect to a single dss-channel. If the configuration does not
match the expectations or exceeds the available resources, the
configuration is rejected.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: Remove the obsolete #define omap_plane _omap_plane hack

Remove the obsolete "#define omap_plane _omap_plane" hack and other
related hacks to get around the enum omap_plane colliding with struct
omap_plane.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: Fix one ugly indentation style break left by coccinelle

Fix one ugly indentation style break left by the previous coccilnelle
patch.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: Rename enum omap_plane to enum omap_plane_id

The enum omap_plane conflicted with the same struct name for omapdrm
plane private data. This rename should solve the conflict.

The rename was implement with this very simple coccinelle patch:
------------------------
@@
@@
enum
-omap_plane
+omap_plane_id
------------------------
The patch was applied like this:
spatch --sp-file <cocci_file> --all-includes --in-place --dir drivers/gpu/drm/omapdrm

The above patch did not rename the actual enum definition. That was
added manually on top of the spatch changes.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: Get rid of DRM_OMAP_NUM_CRTCS config option

Allocate one CRTC for each connected output and get rid of
DRM_OMAP_NUM_CRTCS config option. We still can not create more CRTCs
than we have DSS display managers. We also reserve one overlay per
CRTC for primary plane so we can not have more CRTCs than we have
overlays either.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: fix crash on module unload

When unloading omapdrm we get a NULL pointer deref in
omap_drm_irq_uninstall(). This is caused by:

967dd48417874dd25491a4e933648f394a64f70f ("drm: remove
drm_vblank_no_hw_counter assignment from driver code")

We shut down all the crtcs at unload time before calling
omap_drm_irq_uninstall, so the code in omap_drm_irq_uninstall() is
unnecessary and can be removed.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

drm/omap: use drm_atomic_helper_shutdown()

Use drm_atomic_helper_shutdown() to ensure that all crtcs are disabled
when unloading the driver.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>