GitHub/LineageOS/G12/android_kernel_amlogic_linux-4.9.git
11 years agobatman-adv: fix local translation table output
Antonio Quartulli [Thu, 24 Jan 2013 10:41:39 +0000 (11:41 +0100)]
batman-adv: fix local translation table output

The last-seen field has to be printed for all the local
entries but the one marked with the no-purge flag

Introduced by 15727323d9f8864b2d41930940acc38de987045a
("batman-adv: don't print the last_seen time for bat0 TT local entry")

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
11 years agonet: fix possible wrong checksum generation
Eric Dumazet [Fri, 25 Jan 2013 20:34:37 +0000 (20:34 +0000)]
net: fix possible wrong checksum generation

Pravin Shelar mentioned that GSO could potentially generate
wrong TX checksum if skb has fragments that are overwritten
by the user between the checksum computation and transmit.

He suggested to linearize skbs but this extra copy can be
avoided for normal tcp skbs cooked by tcp_sendmsg().

This patch introduces a new SKB_GSO_SHARED_FRAG flag, set
in skb_shinfo(skb)->gso_type if at least one frag can be
modified by the user.

Typical sources of such possible overwrites are {vm}splice(),
sendfile(), and macvtap/tun/virtio_net drivers.

Tested:

$ netperf -H 7.7.8.84
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to
7.7.8.84 () port 0 AF_INET
Recv   Send    Send
Socket Socket  Message  Elapsed
Size   Size    Size     Time     Throughput
bytes  bytes   bytes    secs.    10^6bits/sec

 87380  16384  16384    10.00    3959.52

$ netperf -H 7.7.8.84 -t TCP_SENDFILE
TCP SENDFILE TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 7.7.8.84 ()
port 0 AF_INET
Recv   Send    Send
Socket Socket  Message  Elapsed
Size   Size    Size     Time     Throughput
bytes  bytes   bytes    secs.    10^6bits/sec

 87380  16384  16384    10.00    3216.80

Performance of the SENDFILE is impacted by the extra allocation and
copy, and because we use order-0 pages, while the TCP_STREAM uses
bigger pages.

Reported-by: Pravin Shelar <pshelar@nicira.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoMerge branch 'for-davem' of git://gitorious.org/linux-can/linux-can-next
David S. Miller [Mon, 28 Jan 2013 05:19:34 +0000 (00:19 -0500)]
Merge branch 'for-davem' of git://gitorious.org/linux-can/linux-can-next

Marc Kleine-Budde says:

====================
this is a pull-request for net-next/master. There is are 9 patches by
Fabio Baltieri and Kurt Van Dijck which add LED infrastructure and
support for CAN devices. Bernd Krumboeck adds a driver for the USB CAN
adapter from 8 devices. Oliver Hartkopp improves the CAN gateway
functionality. There are 4 patches by me, which clean up the CAN's
Kconfig.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet: add RCU annotation to sk_dst_cache field
Cong Wang [Tue, 22 Jan 2013 21:09:51 +0000 (21:09 +0000)]
net: add RCU annotation to sk_dst_cache field

sock->sk_dst_cache is protected by RCU.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agodecnet: use correct RCU API to deref sk_dst_cache field
Cong Wang [Tue, 22 Jan 2013 21:09:50 +0000 (21:09 +0000)]
decnet: use correct RCU API to deref sk_dst_cache field

sock->sk_dst_cache is protected by RCU, therefore we should
use __sk_dst_get() to deref it once we lock the sock.

This fixes several sparse warnings.

Cc: linux-decnet-user@lists.sourceforge.net
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet/mlx4_en: Initialize RFS filters lock and list in init_netdev
Amir Vadai [Thu, 24 Jan 2013 01:54:19 +0000 (01:54 +0000)]
net/mlx4_en: Initialize RFS filters lock and list in init_netdev

filters_lock might have been used while it was re-initialized.
Moved filters_lock and filters_list initialization to init_netdev instead of
alloc_resources which is called every time the device is configured.

Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet/mlx4_en: Fix a race when closing TX queue
Amir Vadai [Thu, 24 Jan 2013 01:54:18 +0000 (01:54 +0000)]
net/mlx4_en: Fix a race when closing TX queue

There is a possible race where the TX completion handler can clean the
entire TX queue between the decision that the queue is full and actually
closing it. To avoid this situation, check again if the queue is really
full, if not, reopen the transmit and continue with sending the packet.

CC: Eric Dumazet <edumazet@google.com>
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.com>
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet/mlx4_core: Return proper error code when __mlx4_add_one fails
Jack Morgenstein [Thu, 24 Jan 2013 01:54:17 +0000 (01:54 +0000)]
net/mlx4_core: Return proper error code when __mlx4_add_one fails

Returning 0 (success) when in fact we are aborting the load, leads to kernel
panic when unloading the module. Fix that by returning the actual error code.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet/mlx4_en: Use the correct netif lock on ndo_set_rx_mode
Eugenia Emantayev [Thu, 24 Jan 2013 01:54:16 +0000 (01:54 +0000)]
net/mlx4_en: Use the correct netif lock on ndo_set_rx_mode

The device multicast list is protected by netif_addr_lock_bh in the networking core, we should
use this locking practice in mlx4_en too.

Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Reviewed-by: Yevgeny Petrilin <yevgenyp@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet/mlx4_en: Fix traffic loss under promiscuous mode
Aviad Yehezkel [Thu, 24 Jan 2013 01:54:15 +0000 (01:54 +0000)]
net/mlx4_en: Fix traffic loss under promiscuous mode

When port is stopped and flow steering mode is not device managed: promisc QP
rule wasn't removed from MCG table.
Added code to remove it in all flow steering modes.
In addition, promsic rule removal should be in stop port and not in start
port - moved it accordingly.

Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet/mlx4_en: Issue the dump eth statistics command under lock
Eugenia Emantayev [Thu, 24 Jan 2013 01:54:14 +0000 (01:54 +0000)]
net/mlx4_en: Issue the dump eth statistics command under lock

Performing the DUMP_ETH_STATS firmware command outside the lock leads to kernel
panic when data structures such as RX/TX rings are freed in parallel, e.g when
one changes the mtu or ring sizes.

Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agogro: Fix kcalloc argument order
Joe Perches [Sat, 26 Jan 2013 09:24:19 +0000 (09:24 +0000)]
gro: Fix kcalloc argument order

First number, then size.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoirda: buffer overflow in irnet_ctrl_read()
Dan Carpenter [Thu, 24 Jan 2013 20:40:56 +0000 (20:40 +0000)]
irda: buffer overflow in irnet_ctrl_read()

The comments here say that the /* Max event is 61 char */ but in 2003 we
changed the event format and now the max event size is 75.  The longest
event is:

"Discovered %08x (%s) behind %08x {hints %02X-%02X}\n",
         12345678901    23  456789012    34567890    1    2 3
            +8    +21        +8          +2   +2     +1
         = 75 characters.

There was a check to return -EOVERFLOW if the user gave us a "count"
value that was less than 64.  Raising it to 75 might break backwards
compatability.  Instead I removed the check and now it returns a
truncated string if "count" is too low.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoMerge branch 'intel'
David S. Miller [Mon, 28 Jan 2013 00:06:42 +0000 (19:06 -0500)]
Merge branch 'intel'

Jeff Kirsher says:

====================
This series contains updates to e1000e only.  All the updates come
from Bruce Allan and most of the patch fix or enable features on
i217/i218.  Most notably is patch 03 "e1000e: add support for IEEE-1588
PTP", which is v2 of the patch based on feedback from Stephen Hemminger.

Also patch 04 "e1000e: enable ECC on I217/I218 to catch packet buffer
memory errors" should be queued up for stable (as well as net) trees, but
the patch does not apply cleanly to either of those trees currently.
So I will work with Bruce to provide a version of the patch which will
apply cleanly to net (and stable) and we can queue it up at that point
for stable 3.5 tree.

The remaining patches are general cleanups of the code.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoe1000e: cleanup: do not assign a variable a value when not necessary
Bruce Allan [Sat, 5 Jan 2013 05:08:37 +0000 (05:08 +0000)]
e1000e: cleanup: do not assign a variable a value when not necessary

Static analysis with cppcheck has shown a few instances of a variable
being reassigned a value before the old one has been used.  None of these
ever require the old value to be used so remove the old values.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
11 years agoe1000e: do not ignore variables which get set a value
Bruce Allan [Sat, 5 Jan 2013 05:08:31 +0000 (05:08 +0000)]
e1000e: do not ignore variables which get set a value

Static analysis with cppcheck has shown a few instances of a variable which
is assigned a value that is never used.  A number of these are the return
status of various driver function calls which should be passed back to the
caller of the current function.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
11 years agoe1000e: cleanup: remove unnecessary function prototypes
Bruce Allan [Sat, 5 Jan 2013 03:06:54 +0000 (03:06 +0000)]
e1000e: cleanup: remove unnecessary function prototypes

...and cleanup some whitespace in other prototypes.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
11 years agoe1000e: add comment to spinlock_t definition
Bruce Allan [Fri, 4 Jan 2013 10:06:03 +0000 (10:06 +0000)]
e1000e: add comment to spinlock_t definition

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
11 years agoe1000e: remove definition of struct which is no longer used
Bruce Allan [Fri, 4 Jan 2013 09:54:11 +0000 (09:54 +0000)]
e1000e: remove definition of struct which is no longer used

The e1000e driver has been converted to use extended descriptors instead of
the older legacy descriptor type.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
11 years agoe1000e: fix PHY init workarounds for i217/i218
Bruce Allan [Fri, 4 Jan 2013 09:53:19 +0000 (09:53 +0000)]
e1000e: fix PHY init workarounds for i217/i218

Toggling the LANPHYPC Value bit cycles the power on the PHY and sets it
back to power-on defaults.  This includes setting it's MAC-PHY messaging
mode to use the PCIe-like interconnect, so the MAC must also be set back
from SMBus mode to PCIe mode otherwise the PHY can be inaccessible.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
11 years agoe1000e: correct maximum frame size on i217/i218
Bruce Allan [Fri, 4 Jan 2013 09:51:36 +0000 (09:51 +0000)]
e1000e: correct maximum frame size on i217/i218

The largest jumbo frame supported by the i217 and i218 hardware is 9018.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
11 years agoe1000e: update copyright date
Bruce Allan [Tue, 1 Jan 2013 16:00:01 +0000 (16:00 +0000)]
e1000e: update copyright date

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
11 years agoe1000e: remove prototype of non-existent function
Bruce Allan [Sat, 29 Dec 2012 09:08:50 +0000 (09:08 +0000)]
e1000e: remove prototype of non-existent function

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
11 years agoe1000e: prevent hardware from automatically configuring PHY on I217/I218
Bruce Allan [Wed, 12 Dec 2012 04:45:51 +0000 (04:45 +0000)]
e1000e: prevent hardware from automatically configuring PHY on I217/I218

As done with the previous generation managed 82579, prevent the PHY from
being put into an unknown state by blocking the hardware from automatically
configuring the PHY as done with the previous generation managed 82579.
Instead, the driver should configure the PHY with contents of the EEPROM
image.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
11 years agoe1000e: enable ECC on I217/I218 to catch packet buffer memory errors
Bruce Allan [Wed, 23 Jan 2013 09:00:03 +0000 (09:00 +0000)]
e1000e: enable ECC on I217/I218 to catch packet buffer memory errors

In rare instances, memory errors have been detected in the internal packet
buffer memory on I217/I218 when stressed under certain environmental
conditions.  Enable Error Correcting Code (ECC) in hardware to catch both
correctable and uncorrectable errors.  Correctable errors will be handled
by the hardware.  Uncorrectable errors in the packet buffer will cause the
packet to be received with an error indication in the buffer descriptor
causing the packet to be discarded.  If the uncorrectable error is in the
descriptor itself, the hardware will stop and interrupt the driver
indicating the error.  The driver will then reset the hardware in order to
clear the error and restart.

Both types of errors will be accounted for in statistics counters.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
11 years agoe1000e: add support for IEEE-1588 PTP
Bruce Allan [Sat, 19 Jan 2013 01:09:58 +0000 (01:09 +0000)]
e1000e: add support for IEEE-1588 PTP

Add PTP IEEE-1588 support and make accesible via the PHC subsystem.

v2: make e1000e_ptp_clock_info a static const struct per Stephen Hemminger

Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Reviewed-by: Jacob Keller <Jacob.e.keller@intel.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
11 years agoe1000e: fix flow-control thresholds for jumbo frames on 82579/I217/I218
Bruce Allan [Sat, 8 Dec 2012 00:35:35 +0000 (00:35 +0000)]
e1000e: fix flow-control thresholds for jumbo frames on 82579/I217/I218

The previous static flow-control thresholds were causing unnecessary pause
packets to be transmitted when jumbo frames are configured reducing the
throughput.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
11 years agoe1000e: fix ethtool offline register test for I217
Bruce Allan [Wed, 5 Dec 2012 06:25:36 +0000 (06:25 +0000)]
e1000e: fix ethtool offline register test for I217

The SHRAH[9] register on I217 has a different R/W bit-mask than RAR and
SHRAL/H registers.  Set R/W bit-mask appropriately for SHRAH[9] when
testing the R/W ability of the register.  Also, fix the error message log
format so that it does not provide misleading information (i.e. the logged
register address could be incorrect).

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
11 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net...
David S. Miller [Sun, 27 Jan 2013 06:26:27 +0000 (01:26 -0500)]
Merge branch 'master' of git://git./linux/kernel/git/jkirsher/net-next

Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agosoreuseport: fix use of uid in tb->fastuid
Tom Herbert [Sat, 26 Jan 2013 07:50:54 +0000 (07:50 +0000)]
soreuseport: fix use of uid in tb->fastuid

Fix a reported compilation error where ia variable of type kuid_t
was being set to zero.

Eliminate two instances of setting tb->fastuid to zero.  tb->fastuid is
only used if tb->fastreuseport is set, so there should be no problem if
tb->fastuid is not initialized (when tb->fastreuesport is zero).

Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoRemove leftover #endif after introducing SO_REUSEPORT
Thomas Graf [Fri, 25 Jan 2013 00:00:58 +0000 (00:00 +0000)]
Remove leftover #endif after introducing SO_REUSEPORT

Commit 055dc21a1d (soreuseport: infrastructure) removed the #if 0
around SO_REUSEPORT without removing the corresponding #endif
thus causing the header guard to close early.

Cc: Tom Herbert <therbert@google.com>
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoqlcnic: Bump up the version to 5.1.32
Jitendra Kalsaria [Fri, 25 Jan 2013 10:20:41 +0000 (10:20 +0000)]
qlcnic: Bump up the version to 5.1.32

Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoqlcnic: add support for FDB netdevice ops.
Jitendra Kalsaria [Fri, 25 Jan 2013 10:20:40 +0000 (10:20 +0000)]
qlcnic: add support for FDB netdevice ops.

Providing communication channel between KVM and e-Switch so that it
can be informed when hypervisor configures a MAC address and VLAN.

qlcnic_mac_learn module param usage will be changed to:
0 = MAC learning is disable
1 = Driver learning is enable
2 = FDB learning is enable

Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoqlcnic: sleeping function called from invalid context
Jitendra Kalsaria [Fri, 25 Jan 2013 10:20:39 +0000 (10:20 +0000)]
qlcnic: sleeping function called from invalid context

device eth0 entered promiscuous mode
BUG: sleeping function called from invalid context at mm/slub.c:930
in_atomic(): 1, irqs_disabled(): 0, pid: 5911, name: brctl
INFO: lockdep is turned off.
Pid: 5911, comm: brctl Tainted: GF       W  O 3.6.0-0.rc7.git1.4.fc18.x86_64 #1
Call Trace:
[<ffffffff810a29ca>] __might_sleep+0x18a/0x240
[<ffffffff811b5d77>] __kmalloc+0x67/0x2d0
[<ffffffffa00a61a9>] ? qlcnic_alloc_lb_filters_mem+0x59/0xa0 [qlcnic]
[<ffffffffa00a61a9>] qlcnic_alloc_lb_filters_mem+0x59/0xa0 [qlcnic]
[<ffffffffa009e1c1>] qlcnic_set_multi+0x81/0x100 [qlcnic]
[<ffffffff8159cccf>] __dev_set_rx_mode+0x5f/0xb0
[<ffffffff8159cd4f>] dev_set_rx_mode+0x2f/0x50
[<ffffffff8159d00c>] dev_set_promiscuity+0x3c/0x50
[<ffffffffa05ed728>] br_add_if+0x1e8/0x400 [bridge]
[<ffffffffa05ee2df>] add_del_if+0x5f/0x90 [bridge]
[<ffffffffa05eee0b>] br_dev_ioctl+0x4b/0x90 [bridge]
[<ffffffff8159d613>] dev_ifsioc+0x373/0x3b0
[<ffffffff8159d78f>] dev_ioctl+0x13f/0x860
[<ffffffff812dd6e1>] ? avc_has_perm_flags+0x31/0x2c0
[<ffffffff8157c18d>] sock_do_ioctl+0x5d/0x70
[<ffffffff8157c21d>] sock_ioctl+0x7d/0x2c0
[<ffffffff812df922>] ? inode_has_perm.isra.48.constprop.61+0x62/0xa0
[<ffffffff811e4979>] do_vfs_ioctl+0x99/0x5a0
[<ffffffff812df9f7>] ? file_has_perm+0x97/0xb0
[<ffffffff810d716d>] ? trace_hardirqs_on+0xd/0x10
[<ffffffff811e4f19>] sys_ioctl+0x99/0xa0
[<ffffffff816e7369>] system_call_fastpath+0x16/0x1b
br0: port 1(eth0) entered forwarding state
br0: port 1(eth0) entered forwarding state

Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoqlcnic: Fix LED/Beaconing tests to work on all ports of an adapter.
Himanshu Madhani [Fri, 25 Jan 2013 10:20:38 +0000 (10:20 +0000)]
qlcnic: Fix LED/Beaconing tests to work on all ports of an adapter.

Provide port number in command payload for LED/Beaconing tests.

Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoqlcnic: avoid mixed mode interrupts for some adapter types
Manish chopra [Fri, 25 Jan 2013 10:20:37 +0000 (10:20 +0000)]
qlcnic: avoid mixed mode interrupts for some adapter types

o Some adapter types do not support co-existence of Legacy Interrupt with
  MSI-x or MSI among multiple functions. For those adapters, prevent attaching
  to a function during normal load, if MSI-x or MSI vectors are not available.
o Using module parameters use_msi=0 and use_msi_x=0, driver can be loaded in
  legacy mode for all functions in the adapter.

Signed-off-by: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoqlcnic: enable RSS for TCP over IPv6
Shahed Shaikh [Fri, 25 Jan 2013 10:20:36 +0000 (10:20 +0000)]
qlcnic: enable RSS for TCP over IPv6

o This patch enables RSS for TYPE-C packets to enable RSS for TCP over IPv6

Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoqlcnic: enable LRO on IPv6 without dest ip check
Shahed Shaikh [Fri, 25 Jan 2013 10:20:35 +0000 (10:20 +0000)]
qlcnic: enable LRO on IPv6 without dest ip check

Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoqlcnic: set driver version in firmware
Sritej Velaga [Fri, 25 Jan 2013 10:20:34 +0000 (10:20 +0000)]
qlcnic: set driver version in firmware

Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoMerge branch 'master' of git://1984.lsi.us.es/nf-next
David S. Miller [Sun, 27 Jan 2013 05:56:10 +0000 (00:56 -0500)]
Merge branch 'master' of git://1984.lsi.us.es/nf-next

Pablo Neira Ayuso says:

====================
This batch contains netfilter updates for you net-next tree, they are:

* The new connlabel extension for x_tables, that allows us to attach
  labels to each conntrack flow. The kernel implementation uses a
  bitmask and there's a file in user-space that maps the bits with the
  corresponding string for each existing label. By now, you can attach
  up to 128 overlapping labels. From Florian Westphal.

* A new round of improvements for the netns support for conntrack.
  Gao feng has moved many of the initialization code of each module
  of the netns init path. He also made several code refactoring, that
  code looks cleaner to me now.

* Added documentation for all possible tweaks for nf_conntrack via
  sysctl, from Jiri Pirko.

* Cisco 7941/7945 IP phone support for our SIP conntrack helper,
  from Kevin Cernekee.

* Missing header file in the snmp helper, from Stephen Hemminger.

* Finally, a couple of fixes to resolve minor issues with these
  changes, from myself.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agocan: gw: indicate and count deleted frames due to misconfiguration
Oliver Hartkopp [Thu, 17 Jan 2013 17:43:46 +0000 (18:43 +0100)]
can: gw: indicate and count deleted frames due to misconfiguration

Add a statistic counter to detect deleted frames due to misconfiguration with
a new read-only CGW_DELETED netlink attribute for the CAN gateway.

Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
11 years agocan: gw: add a variable limit for CAN frame routings
Oliver Hartkopp [Thu, 17 Jan 2013 17:43:44 +0000 (18:43 +0100)]
can: gw: add a variable limit for CAN frame routings

To prevent a possible misconfiguration (e.g. circular CAN frame routings)
limit the number of routings of a single CAN frame to a small variable value.

The limit can be specified by the module parameter 'max_hops' (1..6).
The default value is 1 (one hop), according to the original can-gw behaviour.

Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
11 years agocan: gw: make routing to the incoming CAN interface configurable
Oliver Hartkopp [Thu, 17 Jan 2013 17:43:41 +0000 (18:43 +0100)]
can: gw: make routing to the incoming CAN interface configurable

Introduce new configuration flag CGW_FLAGS_CAN_IIF_TX_OK to configure if a
CAN sk_buff that has been routed with can-gw is allowed to be send back to
the originating CAN interface.

Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
11 years agocan: add private data space for CAN sk_buffs
Oliver Hartkopp [Thu, 17 Jan 2013 17:43:39 +0000 (18:43 +0100)]
can: add private data space for CAN sk_buffs

The struct can_skb_priv is used to transport additional information along
with the stored struct can(fd)_frame that can not be contained in existing
struct sk_buff elements.

can_skb_priv is located in the skb headroom, which does not touch the existing
CAN sk_buff usage with skb->data and skb->len, so that even out-of-tree
CAN drivers can be used without changes.

Btw. out-of-tree CAN drivers without can_skb_priv in the sk_buff headroom
would not support features based on can_skb_priv.

The can_skb_priv->ifindex contains the first interface where the CAN frame
appeared on the local host. Unfortunately skb->skb_iif can not be used as this
value is overwritten in every netif_receive_skb() call.

Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
11 years agocan: usb_8dev: add LED trigger support
Bernd Krumboeck [Tue, 18 Dec 2012 17:51:04 +0000 (18:51 +0100)]
can: usb_8dev: add LED trigger support

Add support for canbus activity led indicators on usb_8dev devices by
calling appropriate can_led functions.

These are only enabled when CONFIG_CAN_LEDS is Y, becomes no-op
otherwise.

Signed-off-by: Bernd Krumboeck <krumboeck@universalnet.at>
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
11 years agocan: sja1000: add LED trigger support
Fabio Baltieri [Tue, 18 Dec 2012 17:51:03 +0000 (18:51 +0100)]
can: sja1000: add LED trigger support

Add support for canbus activity led indicators on sja1000 devices by
calling appropriate can_led functions.

These are only enabled when CONFIG_CAN_LEDS is Y, becomes no-op
otherwise.

Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
11 years agocan: mcp251x: add LED trigger support
Fabio Baltieri [Tue, 18 Dec 2012 17:51:02 +0000 (18:51 +0100)]
can: mcp251x: add LED trigger support

Add support for canbus activity led indicators on mcp251x devices by
calling appropriate can_led functions.

These are only enabled when CONFIG_CAN_LEDS is Y, becomes no-op
otherwise.

Cc: Christian Pellegrin <chripell@fsfe.org>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
11 years agocan: c_can: add LED trigger support
Fabio Baltieri [Tue, 18 Dec 2012 17:51:01 +0000 (18:51 +0100)]
can: c_can: add LED trigger support

Add support for canbus activity led indicators on c_can devices by
calling appropriate can_led functions.

These are only enabled when CONFIG_CAN_LEDS is Y, becomes no-op
otherwise.

Cc: Bhupesh Sharma <bhupesh.sharma@st.com>
Cc: AnilKumar Ch <anilkumar@ti.com>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
11 years agocan: ti_hecc: add LED trigger support
Fabio Baltieri [Tue, 18 Dec 2012 17:51:00 +0000 (18:51 +0100)]
can: ti_hecc: add LED trigger support

Add support for canbus activity led indicators on ti_hecc devices by
calling appropriate can_led functions.

These are only enabled when CONFIG_CAN_LEDS is Y, becomes no-op
otherwise.

Cc: Anant Gole <anantgole@ti.com>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
11 years agocan: at91_can: add LED trigger support
Fabio Baltieri [Tue, 18 Dec 2012 17:50:59 +0000 (18:50 +0100)]
can: at91_can: add LED trigger support

Add support for canbus activity led indicators on at91_can devices by
calling appropriate can_led functions.

These are only enabled when CONFIG_CAN_LEDS is Y, becomes no-op
otherwise.

Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
11 years agocan: flexcan: add LED trigger support
Fabio Baltieri [Tue, 18 Dec 2012 17:50:58 +0000 (18:50 +0100)]
can: flexcan: add LED trigger support

Add support for canbus activity led indicators on flexcan devices by
calling appropriate can_led_* functions.

These are only enabled when CONFIG_CAN_LEDS is Y, becomes no-op
otherwise.

Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
11 years agocan: rename LED trigger name on netdev renames
Kurt Van Dijck [Tue, 18 Dec 2012 17:50:57 +0000 (18:50 +0100)]
can: rename LED trigger name on netdev renames

The LED trigger name for CAN devices is based on the initial
CAN device name, but does never change. The LED trigger name
is not guaranteed to be unique in case of hotplugging CAN devices.

This patch tries to address this problem by modifying the
LED trigger name according to the CAN device name when
the latter changes.

v1 - Kurt Van Dijck
v2 - Fabio Baltieri
- remove rename blocking if trigger is bound
- use led-subsystem function for the actual rename (still WiP)
- call init/exit functions from dev.c
v3 - Kurt Van Dijck
- safe operation for non-candev based devices (vcan, slcan)
based on earlier patch
v4 - Kurt Van Dijck
- trivial patch mistakes fixed

Signed-off-by: Kurt Van Dijck <kurt.van.dijck@eia.be>
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
11 years agocan: export a safe netdev_priv wrapper for candev
Kurt Van Dijck [Tue, 18 Dec 2012 17:50:56 +0000 (18:50 +0100)]
can: export a safe netdev_priv wrapper for candev

In net_device notifier calls, it was impossible to determine
if a CAN device is based on candev in a safe way.
This patch adds such test in order to access candev storage
from within those notifiers.

Signed-off-by: Kurt Van Dijck <kurt.van.dijck@eia.be>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
11 years agocan: add tx/rx LED trigger support
Fabio Baltieri [Tue, 18 Dec 2012 17:50:55 +0000 (18:50 +0100)]
can: add tx/rx LED trigger support

This patch implements the functions to add two LED triggers, named
<ifname>-tx and <ifname>-rx, to a canbus device driver.

Triggers are called from specific handlers by each CAN device driver and
can be disabled altogether with a Kconfig option.

The implementation keeps the LED on when the interface is UP and blinks
the LED on network activity at a configurable rate.

This only supports can-dev based drivers, as it uses some support field
in the can_priv structure.

Supported drivers should call devm_can_led_init() and can_led_event() as
needed.

Cleanup is handled automatically by devres, so no *_exit function is
needed.

Supported events are:
- CAN_LED_EVENT_OPEN: turn on tx/rx LEDs
- CAN_LED_EVENT_STOP: turn off tx/rx LEDs
- CAN_LED_EVENT_TX: trigger tx LED blink
- CAN_LED_EVENT_RX: trigger tx LED blink

Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
11 years agocan: usb_8dev: Add support for USB2CAN interface from 8 devices
Bernd Krumboeck [Sat, 19 Jan 2013 06:30:45 +0000 (07:30 +0100)]
can: usb_8dev: Add support for USB2CAN interface from 8 devices

Add device driver for USB2CAN interface from "8 devices" (http://www.8devices.com).

changes since v10:
* small cleanups

changes since v9:
* fixed syslog messages
* fixed crc error number
* increased MAX_RX_URBS and MAX_TX_URBS

changes since v8:
* remove all sysfs files

changes since v7:
* add sysfs documentation
* fix minor styling issue
* fixed can state for passive mode
* changed handling for crc errors

changes since v6:
* changed some variable types to big endian equivalent
* small cleanups

changes since v5:
* unlock mutex on error

changes since v4:
* removed FSF address
* renamed struct usb_8dev
* removed unused variable free_slots
* replaced some _to_cpu functions with pointer equivalent
* fix return value for usb_8dev_set_mode
* handle can errors with separate function
* fix overrun error handling
* rewrite error handling for usb_8dev_start_xmit
* fix urb submit in usb_8dev_start
* various small fixes

Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Bernd Krumboeck <krumboeck@universalnet.at>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
11 years agocan: sja1000: correct indention of Kconfig help text
Marc Kleine-Budde [Thu, 9 Aug 2012 07:32:09 +0000 (09:32 +0200)]
can: sja1000: correct indention of Kconfig help text

This patch changes the indention of the Kconfig help text to the default
<tab> + 2 <space>.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
11 years agocan: Kconfig: switch on all CAN protocolls by default
Marc Kleine-Budde [Fri, 20 Jul 2012 19:22:27 +0000 (21:22 +0200)]
can: Kconfig: switch on all CAN protocolls by default

This patch enables all basic CAN protocol by default.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
11 years agocan: Kconfig: convert 'depends on CAN_DEV' into 'if CAN_DEV...endif' block
Marc Kleine-Budde [Fri, 20 Jul 2012 19:04:13 +0000 (21:04 +0200)]
can: Kconfig: convert 'depends on CAN_DEV' into 'if CAN_DEV...endif' block

This patch adds an 'if CAN_DEV...endif' Block around the CAN driver
symbols in drivers/net/can/Kconfig. So the 'depends on CAN' dependencies
can be removed.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
11 years agocan: Kconfig: convert 'depends on CAN' into 'if CAN...endif' block
Marc Kleine-Budde [Fri, 20 Jul 2012 19:00:00 +0000 (21:00 +0200)]
can: Kconfig: convert 'depends on CAN' into 'if CAN...endif' block

This patch adds an 'if CAN...endif' Block around all CAN symbols in
net/can/Kconfig. So the 'depends on CAN' dependencies can be removed.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
11 years agoixgbevf: Fix link speed message to support 100Mbps
Greg Rose [Sat, 19 Jan 2013 06:40:22 +0000 (06:40 +0000)]
ixgbevf: Fix link speed message to support 100Mbps

The X540 can link at 100Mbps - fix the link speed indicator message to
show that value.

Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
11 years agoixgbe: Limit number of reported VFs to device specific value
Donald Dutile [Tue, 11 Dec 2012 08:26:48 +0000 (08:26 +0000)]
ixgbe: Limit number of reported VFs to device specific value

ixgbe claims it supports 64 VFs in its SRIOV capability
structure, but the driver only supports 63.  Adjust it
so sysfs sriov configuration checking will check with
the proper totalvf value.

Signed-off-by: Donald Dutile <ddutile@redhat.com>
Acked-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
11 years agoixgbe: Implement PCI SR-IOV sysfs callback operation
Greg Rose [Tue, 11 Dec 2012 08:26:43 +0000 (08:26 +0000)]
ixgbe: Implement PCI SR-IOV sysfs callback operation

Implement callbacks in the driver for the new PCI bus driver
interface that allows the user to enable/disable SR-IOV VFs
in a device via the sysfs interface.

Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
CC: Don Dutile <ddutile@redhat.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
11 years agoixgbe: Modularize SR-IOV enablement code
Greg Rose [Tue, 11 Dec 2012 08:26:38 +0000 (08:26 +0000)]
ixgbe: Modularize SR-IOV enablement code

In preparation for enable/disable of SR-IOV via the PCI sysfs interface
move some core SR-IOV enablement code that would be common to module
parameter usage or callback from the PCI bus driver to a separate
function so that it can be used by either method.

Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
CC: Don Dutile <ddutile@redhat.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Tested-by: Sibai Li <Sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
11 years agoixgbe: Make mailbox ops initialization unconditional
Greg Rose [Tue, 11 Dec 2012 08:26:33 +0000 (08:26 +0000)]
ixgbe: Make mailbox ops initialization unconditional

There is no actual dependency on initialization of the mailbox ops on
whether SR-IOV is enabled or not and it doesn't hurt to go ahead and
initialize ops unconditionally.  Move the initialization into the device
probe so that the mailbox ops are initialized at the time we have the
board info necessary to do it.

Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
CC: Don Dutile <ddutile@redhat.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Tested-by: Sibai Li <Sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
11 years agoixgbe: only compile ixgbe_debugfs.o when enabled
Jacob Keller [Sat, 8 Dec 2012 09:04:25 +0000 (09:04 +0000)]
ixgbe: only compile ixgbe_debugfs.o when enabled

This patch modifies ixgbe_debugfs.c and the Makefile for the ixgbe
driver to only compile the file when the config is enabled. This means
we can remove the #ifdef inside the ixgbe_debugfs.c file.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
11 years agoixgbe: Inline Rx PTP descriptor handling
Alexander Duyck [Wed, 5 Dec 2012 06:51:29 +0000 (06:51 +0000)]
ixgbe: Inline Rx PTP descriptor handling

This change is meant to inline the Rx PTP descriptor handling.  The main
motivation is to avoid unnecessary jumps into function calls that we then
immediately exit because we are not performing timestamps.

The net result of this change is that ixgbe_ptp_rx_tstamp drops from .5% CPU
utilization in my performance runs to 0%, and the only value tested is the Rx
descriptor which should already be warm in the cache if not stored in a
register.

Cc: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Acked-by: Jacob Keller <Jacob.e.keller@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
11 years agoixgbe: Fix overwriting of rx_mtrl in ixgbe_ptp_hwtstamp_ioctl
Jacob Keller [Wed, 5 Dec 2012 07:53:38 +0000 (07:53 +0000)]
ixgbe: Fix overwriting of rx_mtrl in ixgbe_ptp_hwtstamp_ioctl

This patch corrects a bug introduced by commit f3444d8b. The rxmtrl value for
the UDP port to timestamp on was moved above the switch statement, but was
overwritten to 0 if the ioctl selected one of the V1 filters.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
11 years agoixgbe: add warning when scheduling reset
Jacob Keller [Sat, 1 Dec 2012 07:57:17 +0000 (07:57 +0000)]
ixgbe: add warning when scheduling reset

This patch adds warnings when a reset of the adapter is scheduled so that the
user can see log of why the reset occurred.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
11 years agoixgbe: Add ptp work item to poll for the Tx timestamp
Jacob Keller [Wed, 5 Dec 2012 07:24:46 +0000 (07:24 +0000)]
ixgbe: Add ptp work item to poll for the Tx timestamp

This patch copies the igb implementation of Tx timestamps, which uses a work
item to poll for the Tx timestamp. In addition it adds a timeout value of 15
seconds, after which it will stop polling.

This is necessary due to an issue with the descriptor being marked done before
the Tx timestamp event has occurred. These two events don't correlate, so using
the done bit on the descriptor as indication that the timestamp must already
have been taken leads to potentially dropped Tx timestamps (especially under
heavy packet load)

Reported-by: Matthew Vick <matthew.vick@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
11 years agoixgbe: Use watchdog check in favor of BPF for detecting latched timestamp
Jacob Keller [Wed, 5 Dec 2012 07:24:41 +0000 (07:24 +0000)]
ixgbe: Use watchdog check in favor of BPF for detecting latched timestamp

This patch removes ixgbe_ptp_match, and the corresponding packet filtering from
ixgbe driver. This code was previously causing some issues within the hotpath of
the driver. However the code also provided a check against possible frozen Rx
timestamp due to dropped packets when the Rx ring is full. This patch provides a
replacement solution based on the watchdog.

To this end, whenever a packet consumes the Rx timestamp it stores the jiffy
value in the rx_ring structure. Watchdog updates its own jiffy timer whenever
there is no valid timestamp in the registers.

If watchdog detects a valid timestamp in the registers, (meaning that no Rx
packet has consumed it yet) it will check which time is most recent, the last
time in the watchdog, or any time in the rx_rings. If the most recent "event"
was more than 5seconds ago, it will flush the Rx timestamp and print a warning
message to the syslog.

Reported-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
11 years agoixgbe: Update ptp_overflow check comment and jiffies
Jacob Keller [Wed, 5 Dec 2012 07:24:35 +0000 (07:24 +0000)]
ixgbe: Update ptp_overflow check comment and jiffies

This patch fixes the comment on ptp_overflow_check to match up with what is
currently used as the parameters. Also change the jiffies check to use
time_is_after_jiffies macro.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
11 years agoixgbe: add missing supported filters to get_ts_info
Jacob Keller [Thu, 15 Nov 2012 01:10:37 +0000 (01:10 +0000)]
ixgbe: add missing supported filters to get_ts_info

This patch updates the filters for ethtool's get_ts_info to return support for
all filters which can be supported by upscaling to ptp_v2_event. The intent
behind this change is due to reasoning that we do in fact support the
filters. (hwtstamp_ioctl returns success after setting the filter to the
upscaled version). In this way we can remain consistent over which filters are
supported via the get_ts_info ioctl and which filters are in practice actually
supported.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
11 years agoixgbe: ethtool ixgbe_diag_test cleanup
Jacob Keller [Thu, 8 Nov 2012 07:07:08 +0000 (07:07 +0000)]
ixgbe: ethtool ixgbe_diag_test cleanup

This patch cleans up the ethtool diagnostics test by ensuring that the tests
work properly regardless of what state the adapter was in. The SRIOV VF check is
done at the beginning, forgoing the link test. The if_running -> dev_close is
moved before the link test, as well as a call to enable the Tx laser. This
ensures that the link test will return valid results even when adapter was
previously down. Also, a call to disable the Tx laser is added if the device
was down before the start. This ensures consistent behavior of the Tx laser
before and after the diagnostic checks. The end result is consistent behavior
regardless of device state.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
11 years agoMerge branch 'testing' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert...
David S. Miller [Wed, 23 Jan 2013 19:00:16 +0000 (14:00 -0500)]
Merge branch 'testing' of git://git./linux/kernel/git/klassert/ipsec-next

Steffen Klassert says:

====================
1) Add a statistic counter for invalid output states and
   remove a superfluous state valid check, from Li RongQing.

2) Probe for asynchronous block ciphers instead of synchronous block
   ciphers to make the asynchronous variants available even if no
   synchronous block ciphers are found, from Jussi Kivilinna.

3) Make rfc3686 asynchronous block cipher and make use of
   the new asynchronous variant, from Jussi Kivilinna.

4) Replace some rwlocks by rcu, from Cong Wang.

5) Remove some unused defines.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agobnx2x: SR-IOV version compatibility bugfix
Ariel Elior [Wed, 23 Jan 2013 03:21:54 +0000 (03:21 +0000)]
bnx2x: SR-IOV version compatibility bugfix

When posting a message on the bulletin board, the PF calculates crc
over the message and places the result in the message. When the VF
samples the Bulletin Board it copies the message aside and validates
this crc. The length of the message is crucial here and must be the
same in both parties. Since the PF is running in the Hypervisor and
the VF is running in a Vm, they can possibly be of different versions.
As the Bulletin Board is designed to grow forward in future versions,
in the VF the length must not be the size of the message structure
but instead it should be a field in the message itself.

Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agobnx2x: Fix compilation with stop-on-error
Yuval Mintz [Wed, 23 Jan 2013 03:21:53 +0000 (03:21 +0000)]
bnx2x: Fix compilation with stop-on-error

Commit 823e1d9 caused bnx2x to fail once BNX2X_STOP_ON_ERROR is set.
Fixes compilation by moving function declarations between header files.

Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agocnic, bnx2x: Add CNIC_DRV_STATE_HANDLES_IRQ to ethdev->drv_state
Michael Chan [Wed, 23 Jan 2013 03:21:52 +0000 (03:21 +0000)]
cnic, bnx2x: Add CNIC_DRV_STATE_HANDLES_IRQ to ethdev->drv_state

In INTA mode, cnic and bnx2x share the same IRQ.  During chip reset,
for example, cnic will stop servicing IRQs after it has shutdown the
cnic hardware resources.  However, the shared IRQ is still active as
bnx2x needs to finish the reset.  There is a window when bnx2x does
not know that cnic is no longer handling IRQ and things don't always
work properly.

Add a flag to tell bnx2x that cnic is handling IRQ.  The flag is set
before the first cnic IRQ is expected and cleared when no more cnic
IRQs are expected, so there should be no race conditions.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agobnx2x: correct memory release scheme
Yuval Mintz [Wed, 23 Jan 2013 03:21:51 +0000 (03:21 +0000)]
bnx2x: correct memory release scheme

Fix an incorrect SR-IOV memory release which was committed in 1ab4434.

Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agobnx2x: Remove many sparse warnings
Yuval Mintz [Wed, 23 Jan 2013 03:21:50 +0000 (03:21 +0000)]
bnx2x: Remove many sparse warnings

Remove most of the sparse warnings in the bnx2x compilation
(i.e., thus resulting when compiling with `C=2 CF=-D__CHECK_ENDIAN__').

Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agobnx2x: Modify unload conditions
Yuval Mintz [Wed, 23 Jan 2013 03:21:49 +0000 (03:21 +0000)]
bnx2x: Modify unload conditions

Don't unload the bnx2x driver if its in a recovery process, or if
the previous load have failed.

Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agobnx2x: Correct memory preparation and release
Dmitry Kravkov [Wed, 23 Jan 2013 03:21:48 +0000 (03:21 +0000)]
bnx2x: Correct memory preparation and release

Since commit 15192a8cf there have been a memory leak upon rmmod
of the bnx2x driver.

This corrects the memory leak and corrects the zeroing of internal
memories upon driver load.

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agobnx2x: Add missing VFs reference in macros
Yuval Mintz [Wed, 23 Jan 2013 03:21:47 +0000 (03:21 +0000)]
bnx2x: Add missing VFs reference in macros

Add missing 57712_VF and 57800_VF to CHIP_IS_E2 and CHIP_IS_E3
macros (missing from commit 8395be5).

Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agobnx2x: Add additional debug information
Yuval Mintz [Wed, 23 Jan 2013 03:21:46 +0000 (03:21 +0000)]
bnx2x: Add additional debug information

Add/Revise several debug prints in the bnx2x driver - on regular flows
as well as error flows.

Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agobnx2x: correct usleep_range usage
Yuval Mintz [Wed, 23 Jan 2013 03:21:45 +0000 (03:21 +0000)]
bnx2x: correct usleep_range usage

Change the incorrect usage of `usleep_range(1000, 1000)' into
`usleep_range(1000, 2000)'.

Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agobnx2x: reorganization and beautification
Yuval Mintz [Wed, 23 Jan 2013 03:21:44 +0000 (03:21 +0000)]
bnx2x: reorganization and beautification

Slightly changes the bnx2x code without `true' functional changes.
Changes include:
 1. Gathering macros into a single macro when combination is used multiple
    times.
 2. Exporting parts of functions into their own functions.
 3. Return values after if-else instead of only on the else condition
    (where current flow would simply return same value later in the code)
 4. Removing some unnecessary code (either dead-code or incorrect conditions)

Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agobnx2x: Semantic renovation
Yuval Mintz [Wed, 23 Jan 2013 03:21:43 +0000 (03:21 +0000)]
bnx2x: Semantic renovation

Mostly corrects white spaces, indentations, and comments.

Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agogianfar: Restore promisc mode on gfar_init_mac()
Claudiu Manoil [Wed, 23 Jan 2013 00:18:36 +0000 (00:18 +0000)]
gianfar: Restore promisc mode on gfar_init_mac()

Reactivate promiscuous mode in H/W upon gfar_init_mac(), if the
net dev requires it (IFF_PROMISC flag set).
This way the promisc mode is preserved accross device reset conditions
like tx timeout, device restore, a.s.o.

Signed-off-by: Voncken C Acksys <cedric.voncken@acksys.fr>
Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoMerge branch 'soreuseport'
David S. Miller [Wed, 23 Jan 2013 18:44:10 +0000 (13:44 -0500)]
Merge branch 'soreuseport'

Tom Herbert says:

====================
This series implements so_reuseport (SO_REUSEPORT socket option) for
TCP and UDP.  For TCP, so_reuseport allows multiple listener sockets
to be bound to the same port.  In the case of UDP, so_reuseport allows
multiple sockets to bind to the same port.  To prevent port hijacking
all sockets bound to the same port using so_reuseport must have the
same uid.  Received packets are distributed to multiple sockets bound
to the same port using a 4-tuple hash.

The motivating case for so_resuseport in TCP would be something like
a web server binding to port 80 running with multiple threads, where
each thread might have it's own listener socket.  This could be done
as an alternative to other models: 1) have one listener thread which
dispatches completed connections to workers. 2) accept on a single
listener socket from multiple threads.  In case #1 the listener thread
can easily become the bottleneck with high connection turn-over rate.
In case #2, the proportion of connections accepted per thread tends
to be uneven under high connection load (assuming simple event loop:
while (1) { accept(); process() }, wakeup does not promote fairness
among the sockets.  We have seen the  disproportion to be as high
as 3:1 ratio between thread accepting most connections and the one
accepting the fewest.  With so_reusport the distribution is
uniform.

The TCP implementation has a problem in that the request sockets for a
listener are attached to a listener socket.  If a SYN is received, a
listener socket is chosen and request structure is created (SYN-RECV
state).  If the subsequent ack in 3WHS does not match the same port
by so_reusport, the connection state is not found (reset) and the
request structure is orphaned.  This scenario would occur when the
number of listener sockets bound to a port changes (new ones are
added, or old ones closed).  We are looking for a solution to this,
maybe allow multiple sockets to share the same request table...

The motivating case for so_reuseport in UDP would be something like a
DNS server.  An alternative would be to recv on the same socket from
multiple threads.  As in the case of TCP, the load across these threads
tends to be disproportionate and we also see a lot of contection on
the socket lock.  Note that SO_REUSEADDR already allows multiple UDP
sockets to bind to the same port, however there is no provision to
prevent hijacking and nothing to distribute packets across all the
sockets sharing the same bound port.  This patch does not change the
semantics of SO_REUSEADDR, but provides usable functionality of it
for unicast.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agosoreuseport: UDP/IPv6 implementation
Tom Herbert [Tue, 22 Jan 2013 09:50:44 +0000 (09:50 +0000)]
soreuseport: UDP/IPv6 implementation

Motivation for soreuseport would be something like a DNS server.  An
alternative would be to recv on the same socket from multiple threads.
As in the case of TCP, the load across these threads tends to be
disproportionate and we also see a lot of contection on the socket lock.
Note that SO_REUSEADDR already allows multiple UDP sockets to bind to
the same port, however there is no provision to prevent hijacking and
nothing to distribute packets across all the sockets sharing the same
bound port.  This patch does not change the semantics of SO_REUSEADDR,
but provides usable functionality of it for unicast.

Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agosoreuseport: TCP/IPv6 implementation
Tom Herbert [Tue, 22 Jan 2013 09:50:39 +0000 (09:50 +0000)]
soreuseport: TCP/IPv6 implementation

Motivation for soreuseport would be something like a web server
binding to port 80 running with multiple threads, where each thread
might have it's own listener socket.  This could be done as an
alternative to other models: 1) have one listener thread which
dispatches completed connections to workers. 2) accept on a single
listener socket from multiple threads.  In case #1 the listener thread
can easily become the bottleneck with high connection turn-over rate.
In case #2, the proportion of connections accepted per thread tends
to be uneven under high connection load (assuming simple event loop:
while (1) { accept(); process() }, wakeup does not promote fairness
among the sockets.  We have seen the  disproportion to be as high
as 3:1 ratio between thread accepting most connections and the one
accepting the fewest.  With so_reusport the distribution is
uniform.

Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agosoreuseport: UDP/IPv4 implementation
Tom Herbert [Tue, 22 Jan 2013 09:50:32 +0000 (09:50 +0000)]
soreuseport: UDP/IPv4 implementation

Allow multiple UDP sockets to bind to the same port.

Motivation soreuseport would be something like a DNS server.  An
alternative would be to recv on the same socket from multiple threads.
As in the case of TCP, the load across these threads tends to be
disproportionate and we also see a lot of contection on the socketlock.
Note that SO_REUSEADDR already allows multiple UDP sockets to bind to
the same port, however there is no provision to prevent hijacking and
nothing to distribute packets across all the sockets sharing the same
bound port.  This patch does not change the semantics of SO_REUSEADDR,
but provides usable functionality of it for unicast.

Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agosoreuseport: TCP/IPv4 implementation
Tom Herbert [Tue, 22 Jan 2013 09:50:24 +0000 (09:50 +0000)]
soreuseport: TCP/IPv4 implementation

Allow multiple listener sockets to bind to the same port.

Motivation for soresuseport would be something like a web server
binding to port 80 running with multiple threads, where each thread
might have it's own listener socket.  This could be done as an
alternative to other models: 1) have one listener thread which
dispatches completed connections to workers. 2) accept on a single
listener socket from multiple threads.  In case #1 the listener thread
can easily become the bottleneck with high connection turn-over rate.
In case #2, the proportion of connections accepted per thread tends
to be uneven under high connection load (assuming simple event loop:
while (1) { accept(); process() }, wakeup does not promote fairness
among the sockets.  We have seen the  disproportion to be as high
as 3:1 ratio between thread accepting most connections and the one
accepting the fewest.  With so_reusport the distribution is
uniform.

Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agosoreuseport: infrastructure
Tom Herbert [Tue, 22 Jan 2013 09:49:50 +0000 (09:49 +0000)]
soreuseport: infrastructure

Definitions and macros for implementing soreusport.

Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoxen-netback: allow changing the MAC address of the interface
Matt Wilson [Tue, 22 Jan 2013 08:08:25 +0000 (08:08 +0000)]
xen-netback: allow changing the MAC address of the interface

Sometimes it is useful to be able to change the MAC address of the
interface for netback devices. For example, when using ebtables it may
be useful to be able to distinguish traffic from different interfaces
without depending on the interface name.

Reported-by: Nikita Borzykh <sample.n@gmail.com>
Reported-by: Paul Harvey <stockingpaul@hotmail.com>
Cc: netdev@vger.kernel.org
Cc: xen-devel@lists.xen.org
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Matt Wilson <msw@amazon.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonetfilter: nf_conntrack: fix compilation if sysctl are disabled
Pablo Neira Ayuso [Wed, 23 Jan 2013 14:12:25 +0000 (15:12 +0100)]
netfilter: nf_conntrack: fix compilation if sysctl are disabled

In (f94161c netfilter: nf_conntrack: move initialization out of pernet
operations), some ifdefs were missing for sysctl dependent code.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
11 years agonetfilter: nf_conntrack: refactor l4proto support for netns
Gao feng [Wed, 23 Jan 2013 11:51:10 +0000 (12:51 +0100)]
netfilter: nf_conntrack: refactor l4proto support for netns

Move the code that register/unregister l4proto to the
module_init/exit context.

Given that we have to modify some interfaces to accomodate
these changes, it is a good time to use shorter function names
for this using the nf_ct_* prefix instead of nf_conntrack_*,
that is:

nf_ct_l4proto_register
nf_ct_l4proto_pernet_register
nf_ct_l4proto_unregister
nf_ct_l4proto_pernet_unregister

We same many line breaks with it.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
11 years agonetfilter: nf_conntrack: refactor l3proto support for netns
Gao feng [Mon, 21 Jan 2013 22:10:33 +0000 (22:10 +0000)]
netfilter: nf_conntrack: refactor l3proto support for netns

Move the code that register/unregister l3proto to the
module_init/exit context.

Given that we have to modify some interfaces to accomodate
these changes, it is a good time to use shorter function names
for this using the nf_ct_* prefix instead of nf_conntrack_*,
that is:

nf_ct_l3proto_register
nf_ct_l3proto_pernet_register
nf_ct_l3proto_unregister
nf_ct_l3proto_pernet_unregister

We same many line breaks with it.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
11 years agonetfilter: nf_ct_proto: move initialization out of pernet_operations
Gao feng [Mon, 21 Jan 2013 22:10:32 +0000 (22:10 +0000)]
netfilter: nf_ct_proto: move initialization out of pernet_operations

Move the global initial codes to the module_init/exit context.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
11 years agonetfilter: nf_ct_labels: move initialization out of pernet_operations
Gao feng [Mon, 21 Jan 2013 22:10:31 +0000 (22:10 +0000)]
netfilter: nf_ct_labels: move initialization out of pernet_operations

Move the global initial codes to the module_init/exit context.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
11 years agonetfilter: nf_ct_helper: move initialization out of pernet_operations
Gao feng [Mon, 21 Jan 2013 22:10:30 +0000 (22:10 +0000)]
netfilter: nf_ct_helper: move initialization out of pernet_operations

Move the global initial codes to the module_init/exit context.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>