Thierry Reding [Fri, 23 Nov 2012 14:01:42 +0000 (15:01 +0100)]
drm: Move mode tables to drm_edid.c
The modes are only used from within drm_edid.c so we move them there to
avoid creating duplicates by multiple inclusion of drm_edid_modes.h. As
a side-effect we can also get rid of a few variables that keep track of
the number of entries in the tables and use ARRAY_SIZE() instead.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Thierry Reding [Thu, 20 Dec 2012 14:41:44 +0000 (15:41 +0100)]
drm: Remove duplicate drm_mode_cea_vic()
The same function had already been merged with a different name. Remove
the duplicate one but reuse some of its kerneldoc fragments for the
existing implementation.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Dave Airlie [Fri, 22 Feb 2013 00:17:11 +0000 (10:17 +1000)]
Merge branch 'exynos-drm-next' of git://git./linux/kernel/git/daeinki/drm-exynos into drm-next
The summary:
. Add display mode check operaion to mixer driver
- Mixer IP also can put certain restrictions on the proposed
display modes and these restrictions need to be considered
during mode negotiation, which happens immediately after
edid parsing.
. Set correct mode for range of resolutions
- With this patch, the mixer driver could find the correct mode
for the range of resolutions upto 1080 vertical lines.
. Support extra resolution for hdmi
- This patch programs the core and timing generator registers
using the timing data provided in drm_display_mode without
hard-coded configurations. So this patch adds additional PHY
configs to allow us to support more permissible resolutions
and refresh rates.
. Add device tree support for g2d
- This patch adds just the compatible string for exynos5250 SoC
so that with device tree enabling, this driver can be probed.
. And bug fixes and code cleanups.
* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
drm/exynos: Add device tree based discovery support for G2D
drm/exynos: hdmi: support extra resolutions using drm_display_mode timings
drm/exynos: mixer: set correct mode for range of resolutions
drm/exynos: implement display-mode-check callback in mixer driver
drm/exynos: add display-mode-check operation to exynos_mixer_ops struct
drm/exynos: release resources properly when fb creation is failed.
drm/exynos: fix wrong pointer access at vm close.
drm/exynos: Add missing braces around sizeof
drm/exynos: consider exception case to fb handle creation
drm/exynos: fix iommu address allocation order
Patrik Jakobsson [Sat, 16 Feb 2013 12:04:21 +0000 (13:04 +0100)]
gma500: Fix n, m1 and m2 clock limits for sdvo and lvds
The values of n, m1 and m2 needs to be subtracted by 2 before writing them to
the FP register. The dot clock calculation already thinks of these values in
register form so we must also specify them as such.
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Ajay Kumar [Wed, 6 Feb 2013 05:29:44 +0000 (10:59 +0530)]
drm/exynos: Add device tree based discovery support for G2D
This patch adds device tree match table for Exynos G2D controller.
Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Sean Paul [Tue, 15 Jan 2013 13:11:08 +0000 (08:11 -0500)]
drm/exynos: hdmi: support extra resolutions using drm_display_mode timings
This patch programs the core and timing generator registers using the
timing data provided in drm_display_mode and not using hard-coded
configurations.
Additional PHY configs has been added. This allows us to support more
permissible resolutions and refresh rates.
Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Shirish S <s.shirish@samsung.com>
Signed-off-by: Akshay Saraswat <Akshay.s@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Rahul Sharma [Tue, 15 Jan 2013 13:11:07 +0000 (08:11 -0500)]
drm/exynos: mixer: set correct mode for range of resolutions
With this patch, mixer driver find the correct resolution mode for
the range of resolutions, upto 1080 vertical lines. Resolution will
be categorized to NTSC SD, PAL SD or HD and the correct mode is
set to the mixer configuration register.
Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Rahul Sharma [Tue, 15 Jan 2013 13:11:06 +0000 (08:11 -0500)]
drm/exynos: implement display-mode-check callback in mixer driver
This patch adds the implementation of check_timing callback in the mixer
driver. Based on the mixer version, correct set of restrictions will be
exposed by the mixer driver. A resolution will be acceptable only if passes
the criteria set by mixer and hdmi IPs.
Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Rahul Sharma [Tue, 15 Jan 2013 13:11:05 +0000 (08:11 -0500)]
drm/exynos: add display-mode-check operation to exynos_mixer_ops struct
This patch adds the display mode check operation to exynos_mixer_ops
in drm-common-hdmi. In Exynos SoCs, mixer IP can put certain restrictions
on the proposed display modes. These restriction needs to be considered
during mode negotiation, which happens immediately after edid parsing.
Both, mixer check-mode and hdmi check-timing callbacks are called one after
another and ANDed result is returned back.
Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
YoungJun Cho [Tue, 12 Feb 2013 12:23:54 +0000 (21:23 +0900)]
drm/exynos: release resources properly when fb creation is failed.
This patch releases allocated resources properly when
exynos_user_fb_create() is failed.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
YoungJun Cho [Thu, 7 Feb 2013 07:17:54 +0000 (16:17 +0900)]
drm/exynos: fix wrong pointer access at vm close.
This patch fixes wrong pointer access issue to filp->f_op and
filp->private_data.
The exynos_drm_gem_mmap_ioctl() changes filp->f_op and
filp->private_data temporarily and restore them to use
original ones in exynos_drm_gem_mmap_buffer() but there
was no lock between the changing and the restoring so
wrong pointer access to filp->f_op and filp->private_data
was induced by vm close callback.
So this patch uses mutex lock properly to resolve this issue.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Sachin Kamat [Fri, 25 Jan 2013 09:15:42 +0000 (14:45 +0530)]
drm/exynos: Add missing braces around sizeof
Fixes the following checkpatch warning:
WARNING: sizeof *sgt should be sizeof(*sgt)
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Inki Dae [Tue, 29 Jan 2013 08:51:09 +0000 (17:51 +0900)]
drm/exynos: consider exception case to fb handle creation
GETFB ioctl request creates a new handle to only one gem object
so it should check if the given fb has one gem object.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Inki Dae [Tue, 29 Jan 2013 07:28:30 +0000 (16:28 +0900)]
drm/exynos: fix iommu address allocation order
This patch modifies iommu address allocation order from 64k
to 4k. 64k order causes waste of the io space and this was
our mistakes.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Dave Airlie [Wed, 20 Feb 2013 23:31:47 +0000 (09:31 +1000)]
Merge branch 'tilcdc-next' of git://people.freedesktop.org/~robclark/linux into drm-next
KMS driver for TI LCD controller
* 'tilcdc-next' of git://people.freedesktop.org/~robclark/linux:
drm/tilcdc: add support for LCD panels (v5)
drm/tilcdc: add encoder slave (v2)
drm/i2c: nxp-tda998x (v3)
drm/tilcdc: add TI LCD Controller DRM driver (v4)
drm/nouveau: use i2c encoder helper wrappers
drm: i2c encoder helper wrappers
drm/cma: add debugfs helpers
drm: small fix in drm_send_vblank_event()
drm: Don't set the plane->fb to NULL on successfull set_plane
drm/cma-helper: fixup compilation
Conflicts:
drivers/gpu/drm/Kconfig
drivers/gpu/drm/Makefile
drivers/gpu/drm/drm_fb_cma_helper.c
Dave Airlie [Wed, 20 Feb 2013 21:15:10 +0000 (07:15 +1000)]
Merge branch 'drm-next-3.9' of git://people.freedesktop.org/~agd5f/linux into drm-next
More drm-next bits for radeon. Just bug fixes.
* 'drm-next-3.9' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: properly validate the atpx interface
drm/radeon: switch get_gpu_clock() to a callback (v2)
drm/radeon: add a asic callback to get the xclk
drm/radeon: Avoid NULL pointer dereference from atom_index_iio() allocation failure
drm/radeon: remove overzealous warning in hdmi handling
drm/radeon: fix multi-head power profile stability on BTC+ asics
Dave Airlie [Wed, 20 Feb 2013 21:13:17 +0000 (07:13 +1000)]
Merge branch 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next
restore debugfs vbios, fix multiple actions with supervisor intrs
* 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
drm/nouveau: restore debugfs/vbios.rom support
drm/nv50-/kms: remove UPDATE methods after each encoder disconnect
drm/nvd0/disp: handle multiple actions from one set of supervisor intrs
drm/nv50/disp: handle multiple actions from one set of supervisor intrs
Alex Deucher [Tue, 19 Feb 2013 17:55:52 +0000 (12:55 -0500)]
drm/radeon: properly validate the atpx interface
Some bioses don't set the function mask correctly
which caused required functions to be disabled.
Fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=53111
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Alex Deucher [Thu, 24 Jan 2013 15:35:23 +0000 (10:35 -0500)]
drm/radeon: switch get_gpu_clock() to a callback (v2)
Cleans up the code for future asics
v2: rebase, fix some missing radeon_asic updates
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 14 Feb 2013 15:04:02 +0000 (10:04 -0500)]
drm/radeon: add a asic callback to get the xclk
This is required to get the reference clock used
by the gfx engine for things like timestamps. Fixes
support for GL extensions the use timestamps on
certain boards.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tim Gardner [Mon, 11 Feb 2013 21:34:32 +0000 (14:34 -0700)]
drm/radeon: Avoid NULL pointer dereference from atom_index_iio() allocation failure
Smatch anlysis:
drivers/gpu/drm/radeon/atom.c:1242 atom_index_iio() error: potential null
dereference 'ctx->iio'. (kzalloc returns null)
Also cleaned up some checks before calls to kfree(). kfree(NULL) is OK.
Cc: David Airlie <airlied@linux.ie>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Michel Dänzer" <michel.daenzer@amd.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 12 Feb 2013 13:39:10 +0000 (08:39 -0500)]
drm/radeon: remove overzealous warning in hdmi handling
hdmi audio works fine. The warning just confuses users.
fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=44341
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Cc: stable@vger.kernel.org
Alex Deucher [Mon, 11 Feb 2013 13:44:48 +0000 (08:44 -0500)]
drm/radeon: fix multi-head power profile stability on BTC+ asics
vddci needs to track mclk for multi-head.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Marcin Slusarz [Fri, 8 Feb 2013 20:42:13 +0000 (21:42 +0100)]
drm/nouveau: restore debugfs/vbios.rom support
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Ben Skeggs [Wed, 20 Feb 2013 10:37:15 +0000 (20:37 +1000)]
drm/nv50-/kms: remove UPDATE methods after each encoder disconnect
Supervisor can now handle more than one operation within a single
series of interrupts.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 20 Feb 2013 09:21:08 +0000 (19:21 +1000)]
drm/nvd0/disp: handle multiple actions from one set of supervisor intrs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 20 Feb 2013 08:56:33 +0000 (18:56 +1000)]
drm/nv50/disp: handle multiple actions from one set of supervisor intrs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Lee, Chun-Yi [Wed, 20 Feb 2013 06:32:01 +0000 (14:32 +0800)]
gpu: remove gma500 stub driver
In v3.3, the gma500 drm driver moved from staging to drm group by
Alan Cox's
3abcf41fb patch. the gma500 drm driver should control
brightness well and don't need gma500 stub driver anymore.
Reference:
http://lists.freedesktop.org/archives/dri-devel/2012-May/023426.html
http://lists.freedesktop.org/archives/dri-devel/2012-May/023467.html
Acked-by: Matthew Garrett <mjg59@srcf.ucam.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Wed, 20 Feb 2013 07:46:25 +0000 (17:46 +1000)]
Merge branch 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next
Nothing terribly exciting in here probably:
- reworked thermal stuff from mupuf/I, has a chance of possibly working
well enough when we get to being able to reclock..
- driver will report mmio access faults on chipsets where it's supported
- will now sleep waiting on fences on nv84+ rather than polling
- some cleanup of the internal fencing, looking towards sli/dmabuf sync
- initial support for anx9805 dp/tmds encoder
- nv50+ display fixes related to the above, and also might fix a few
other issues
- nicer error reporting (will log process names with channel errors)
- various other random fixes
* 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: (87 commits)
nouveau: ACPI support depends on X86 and X86_PLATFORM_DEVICES
drm/nouveau/i2c: add support for ddc/aux, and dp link training on anx9805
drm/nv50: initial kms support for off-chip TMDS/DP encoders
drm/nv50-/disp: initial supervisor support for off-chip encoders
drm/nv50-/disp: initial work towards supporting external encoders
drm/nv50-/kms: remove unnecessary wait-for-completion points
drm/nv50-/disp: move DP link training to core and train from supervisor
drm/nv50-/disp: handle supervisor tasks from workqueue
drm/nouveau/i2c: create proper chipset-specific class implementations
drm/nv50-/disp: 0x0000 is a valid udisp config value
drm/nv50/devinit: reverse the logic for running encoder init scripts
drm/nouveau/bios: store a type/mask hash in parsed dcb data
drm/nouveau/i2c: extend type to 16-bits, add lookup-by-type function
drm/nouveau/i2c: aux channels not necessarily on nvio
drm/nouveau/i2c: fix a bit of a thinko in nv_wri2cr helper functions
drm/nouveau/bios: parse external transmitter type if off-chip
drm/nouveau: store i2c port pointer directly in nouveau_encoder
drm/nouveau/i2c: handle i2c/aux mux outside of port lookup function
drm/nv50/graph: avoid touching 400724, it doesn't exist
drm/nouveau: Fix DPMS 1 on G4 Snowball, from snow white to coal black.
...
Ben Hutchings [Wed, 20 Feb 2013 02:57:32 +0000 (02:57 +0000)]
nouveau: ACPI support depends on X86 and X86_PLATFORM_DEVICES
If I build nouveau on ia64, Kconfig warns:
warning: (DRM_NOUVEAU) selects ACPI_WMI which has unmet direct dependencies (X86 && X86_PLATFORM_DEVICES && ACPI)
warning: (DRM_NOUVEAU) selects MXM_WMI which has unmet direct dependencies (X86 && X86_PLATFORM_DEVICES && ACPI_WMI)
Make all the ACPI support depend on X86 and select
X86_PLATFORM_DEVICES.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 14 Feb 2013 22:48:58 +0000 (17:48 -0500)]
drm/nouveau/i2c: add support for ddc/aux, and dp link training on anx9805
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Sun, 10 Feb 2013 23:52:58 +0000 (09:52 +1000)]
drm/nv50: initial kms support for off-chip TMDS/DP encoders
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Sun, 10 Feb 2013 23:24:23 +0000 (09:24 +1000)]
drm/nv50-/disp: initial supervisor support for off-chip encoders
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Sun, 10 Feb 2013 23:11:08 +0000 (09:11 +1000)]
drm/nv50-/disp: initial work towards supporting external encoders
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 20 Feb 2013 04:34:18 +0000 (14:34 +1000)]
drm/nv50-/kms: remove unnecessary wait-for-completion points
DP link training is now handled as part of the supervisor processing,
and can no longer race with it.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 19 Feb 2013 04:17:53 +0000 (23:17 -0500)]
drm/nv50-/disp: move DP link training to core and train from supervisor
We need to be able to do link training for PIOR-connected ANX9805 from
the third supervisor handler (due to script ordering in the bios, can't
have the "user" call train because some settings are overwritten from
the modesetting bios scripts).
This moves link training for SOR-connected DP encoders to the second
supervisor interrupt, *before* we call the modesetting scripts (yes,
different ordering from PIOR is necessary). This is useful since we
should now be able to remove some hacks to workaround races between
the supervisor and link training paths.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 18 Feb 2013 22:50:51 +0000 (17:50 -0500)]
drm/nv50-/disp: handle supervisor tasks from workqueue
i2c_algo_bit sleeps...
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Sat, 16 Feb 2013 05:21:58 +0000 (15:21 +1000)]
drm/nouveau/i2c: create proper chipset-specific class implementations
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Sat, 16 Feb 2013 03:49:21 +0000 (13:49 +1000)]
drm/nv50-/disp: 0x0000 is a valid udisp config value
Return an out-of-range value instead to signal a failure from
exec_clkcmp().
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Sat, 16 Feb 2013 02:10:38 +0000 (12:10 +1000)]
drm/nv50/devinit: reverse the logic for running encoder init scripts
A single U encoder table can match multiple DCB entries, whereas the
reverse is not true and can lead to us not matching a DCB entry at
all, and fail to initialise some encoders.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Sat, 16 Feb 2013 02:01:59 +0000 (12:01 +1000)]
drm/nouveau/bios: store a type/mask hash in parsed dcb data
Matches format used by a couple of other vbios tables, useful
to have laying around already calculated.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Sat, 16 Feb 2013 03:19:18 +0000 (13:19 +1000)]
drm/nouveau/i2c: extend type to 16-bits, add lookup-by-type function
For off-chip transmitters we won't necessarily have an i2c table entry
to lookup, but we can do it instead by encoding the type to include
the extdev type and looking that up instead.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 15 Feb 2013 01:59:41 +0000 (20:59 -0500)]
drm/nouveau/i2c: aux channels not necessarily on nvio
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 15 Feb 2013 00:54:42 +0000 (19:54 -0500)]
drm/nouveau/i2c: fix a bit of a thinko in nv_wri2cr helper functions
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 12 Feb 2013 00:16:31 +0000 (10:16 +1000)]
drm/nouveau/bios: parse external transmitter type if off-chip
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 11 Feb 2013 10:15:03 +0000 (20:15 +1000)]
drm/nouveau: store i2c port pointer directly in nouveau_encoder
This is about to become somewhat more complicated to determine in a
number of cases, so store the "common" case (DDC/AUX) directly inside
the encoder structure.
Pre-nv50 code not touched except to fill the pointer, don't care.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 11 Feb 2013 10:06:04 +0000 (20:06 +1000)]
drm/nouveau/i2c: handle i2c/aux mux outside of port lookup function
Not quite how I want it yet, but, I'll fix that at some point. For
right now, it's needed because find() won't necessarily be used right
before a transaction anymore.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Sun, 17 Feb 2013 01:31:17 +0000 (11:31 +1000)]
drm/nv50/graph: avoid touching 400724, it doesn't exist
Harmless, but we now get MMIO fault reports, so silence it.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Stefan de Konink [Sat, 22 Dec 2012 17:04:37 +0000 (18:04 +0100)]
drm/nouveau: Fix DPMS 1 on G4 Snowball, from snow white to coal black.
Fixes https://bugs.freedesktop.org/show_bug.cgi?id=40275.
Signed-off-by: Stefan de Konink <stefan@konink.de>
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Dan Carpenter [Wed, 23 Jan 2013 08:27:56 +0000 (11:27 +0300)]
drm/nouveau/disp: sizeof() wrong pointer
"data" is a void pointer and "args" is "data" after we have casted it to
a struct. We care about the size of the struct here. Btw,
sizeof(*data) is 1.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 14 Feb 2013 03:43:21 +0000 (13:43 +1000)]
drm/nv84-/fence: prepare for emit/sync support of sysram sequences
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 14 Feb 2013 03:20:17 +0000 (13:20 +1000)]
drm/nouveau/fence: make internal hooks part of the context
A step towards being able to provide fences from other engines not
connected to PFIFO.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 14 Feb 2013 02:59:36 +0000 (12:59 +1000)]
drm/nv17/fence: split from nv10 code
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 13 Feb 2013 23:37:35 +0000 (09:37 +1000)]
drm/nv84-/fence: abstract class emit/sync functions to virt+sequence
Now can be used to operate on any buffer mapped into the GPU virtual
address and not just the main inter-channel sync buffer.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 13 Feb 2013 23:28:37 +0000 (09:28 +1000)]
drm/nv84/fence: access fences with full virtual address, not offset
Allows most of the code to be shared between nv84/nvc0 implementations,
and paves the way for doing emit/sync on non-VRAM buffers (multi-gpu,
dma-buf).
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 13 Feb 2013 03:34:39 +0000 (13:34 +1000)]
drm/nouveau/gpio/nve0: interrupt regs moved on kepler apparently
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Sun, 3 Feb 2013 02:56:16 +0000 (12:56 +1000)]
drm/nouveau/gpio: use event interfaces for interrupt signalling
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Sun, 3 Feb 2013 21:08:20 +0000 (07:08 +1000)]
drm/nouveau/gpio: pass number of on-die gpio lines to base
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Sun, 3 Feb 2013 10:29:53 +0000 (20:29 +1000)]
drm/nouveau/drm: store full dcb gpio function data in connector
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 31 Jan 2013 04:57:33 +0000 (14:57 +1000)]
drm/nouveau/fence/nv84-: put processes to sleep while waiting on fences
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 31 Jan 2013 22:43:55 +0000 (17:43 -0500)]
drm/nouveau/fifo/nvc0: bash some magic reg to make uevent interrupt work
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 31 Jan 2013 12:41:07 +0000 (22:41 +1000)]
drm/nouveau/fifo/nv84: support user event trigger
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 31 Jan 2013 03:51:20 +0000 (13:51 +1000)]
drm/nouveau/fifo/nvc0-: use interrupt 31 as an event trigger
Generated if you try and use fifo method 0x20 on any subchannel, appears
that it can be safely masked off without stalling the whole GPU.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 30 Jan 2013 23:23:34 +0000 (09:23 +1000)]
drm/nouveau/disp: port vblank handling to event interface
This removes the nastiness with the interactions between display and
software engines when handling vblank semaphore release interrupts.
Now, all the semantics are handled in one place (sw) \o/.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 30 Jan 2013 23:04:48 +0000 (09:04 +1000)]
drm/nouveau/disp/nv04: implement a base display object class
Will be used for upcoming vblank event interfaces.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 30 Jan 2013 14:38:22 +0000 (00:38 +1000)]
drm/nouveau/core: basic event interface between core and drm
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 1 Feb 2013 00:49:33 +0000 (19:49 -0500)]
drm/nouveau/fifo/nvc0: improve interrupt handler somewhat
Logs extra info for interrupts that have a sub-status register, and
handles the "special" ack from INTR bit 31.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 11 Feb 2013 03:56:31 +0000 (13:56 +1000)]
drm/nv50/disp: fix missing sor modectrl sync flags
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Marcin Slusarz [Tue, 5 Feb 2013 19:44:19 +0000 (20:44 +0100)]
drm/nouveau/therm: reduce stack usage of nouveau_therm_ic_ctor
Before: 1496 bytes
After: 152 bytes
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Marcin Slusarz [Sun, 3 Feb 2013 18:28:14 +0000 (19:28 +0100)]
drm/nouveau/therm: use workqueue to shutdown the machine
orderly_poweroff cannot be called from atomic context.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Acked-by: Martin Peres <martin.peres@labri.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Marcin Slusarz [Sun, 3 Feb 2013 18:12:49 +0000 (19:12 +0100)]
drm/nv40/therm: reset temperature sensor on init
Current uninitialized sensor detection does not work for me on nv4b and
sensor returns crazy values (>190°C). It stabilises later, but it's too
late - therm code shutdowns the machine...
Let's just reset it on init.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Acked-by: Martin Peres <martin.peres@labri.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Marcin Slusarz [Sun, 3 Feb 2013 17:17:41 +0000 (18:17 +0100)]
drm/nouveau/therm: turn on fan only when threshold hit in positive direction
+ the same for shutdown threshold - seems impossible, but shutdown can fail.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Acked-by: Martin Peres <martin.peres@labri.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Marcin Slusarz [Sun, 3 Feb 2013 21:02:47 +0000 (22:02 +0100)]
drm/nouveau: report channel owner in ioctl error paths
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Marcin Slusarz [Wed, 30 Jan 2013 21:21:31 +0000 (22:21 +0100)]
drm/nouveau/therm: always initialize alarm_program_lock
Fixes "BUG: spinlock bad magic" on module load for nva3+ cards.
Introduced in commit "drm/nouveau/therm: implement support for temperature
alarms".
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Marcin Slusarz [Sun, 27 Jan 2013 16:13:52 +0000 (17:13 +0100)]
drm/nouveau: handle backlight_device_register failure
Found by smatch.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Marcin Slusarz [Sun, 27 Jan 2013 16:04:48 +0000 (17:04 +0100)]
drm/nouveau: use kmemdup for edid allocation/copying
Avoids potential null pointer dereference.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Marcin Slusarz [Sun, 27 Jan 2013 15:43:00 +0000 (16:43 +0100)]
drm/nouveau: use drm_property_create_range helper
Avoids potential null pointer dereference.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cong Ding [Tue, 15 Jan 2013 17:19:49 +0000 (18:19 +0100)]
drm/nouveau: remove unnecessary null pointer check from nouveau_fence_new
the variable chan is dereferenced in line 190, so it is no reason to check
null again in line 198.
Signed-off-by: Cong Ding <dinggnu@gmail.com>
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Marcin Slusarz [Sun, 27 Jan 2013 15:11:18 +0000 (16:11 +0100)]
drm/nvc0/graph: remove redundant null checks
It's safe to call kfree(NULL).
Found by smatch.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Marcin Slusarz [Sun, 27 Jan 2013 14:51:09 +0000 (15:51 +0100)]
drm/nouveau/fan: fix selection of fan speed when fan->get returns an error
fan->get returns int, but we write it to unsigned variable, and then check
whether it's >= 0 (it always is)
Found by smatch:
drivers/gpu/drm/nouveau/core/subdev/therm/fan.c:61 nouveau_fan_update() warn: always true condition '(duty >= 0) => (0-u32max >= 0)'
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Marcin Slusarz [Sun, 27 Jan 2013 14:01:55 +0000 (15:01 +0100)]
drm/nouveau: quiet static-related sparse noise
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Marcin Slusarz [Sun, 30 Dec 2012 15:35:24 +0000 (16:35 +0100)]
drm/nouveau/bios: tiny debugging messages fixes
COPY_ZM_REG: destination and source addresses were swapped
RAM_RESTRICT_ZM_REG_GROUP: missing 0x prefix for register address
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Marcin Slusarz [Sat, 29 Dec 2012 15:24:37 +0000 (16:24 +0100)]
drm/nouveau: mark nv_printk_ as printf-like function
...and fix all warnings
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Marcin Slusarz [Tue, 25 Dec 2012 16:50:43 +0000 (17:50 +0100)]
drm/nouveau: share fence structures between nv10+ and nv50 implementations
We already rely on them having the same fields and layout.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Martin Peres [Thu, 20 Dec 2012 00:32:09 +0000 (01:32 +0100)]
drm/nouveau/fan: handle the cases where we are outside of the linear zone
This fixes a bug where, when temperature is outside of the linear range, fan
pwm would be outside of the allowed range ([0, 100]) and could get negative in
some cases.
It seems like a regression that happened when we re-worked the fan management
logic before merging.
Tested-by: Ozan Çağlayan <ozancag@gmail.com>
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Marcin Slusarz [Sun, 9 Dec 2012 22:00:34 +0000 (23:00 +0100)]
drm/nouveau: report channel owner in error messages
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Marcin Slusarz [Sun, 9 Dec 2012 14:45:21 +0000 (15:45 +0100)]
drm/nouveau: prepare for reporting channel owner
- record channel owner process name
- add some helpers for accessing this information
- let nouveau_enum hold additional value (will be needed in the next patch)
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Marcin Slusarz [Sun, 9 Dec 2012 14:45:20 +0000 (15:45 +0100)]
drm/nouveau: use pr_cont
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Marcin Slusarz [Sun, 9 Dec 2012 14:45:19 +0000 (15:45 +0100)]
drm/nouveau: split fifo interrupt handler
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Martin Peres [Sat, 8 Dec 2012 13:00:38 +0000 (14:00 +0100)]
drm/nouveau/therm: force a minimum hysteresis on temperature alarm thresholds
This should avoid the situation where a user gets its kernel logs flooded when
temperature oscillates around a threshold with 0°C hysteresis.
This patch is just meant to fix broken vbios (as reported on a nv4e on
sysfs hwmon interface.
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Emil Velikov [Fri, 7 Dec 2012 17:26:44 +0000 (17:26 +0000)]
drm/nouveau: set legacy bios data before parsing the structure
Commit
767baf82 drm/nouveau: remove some more unnecessary legacy bios code
has introduced a regression my misplacing the code that sets the major/chip
versions, which are used whist parsing the bmp/bit structure in vbios
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 7 Dec 2012 01:37:28 +0000 (11:37 +1000)]
drm/nouveau/therm: don't try pwm/toggle control if GPIO_FAN is input
My GTX660 has the GPIO_FAN function, but it's configured in input-mode;
presumably to monitor the frequency set by an I2C fan controller?
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 7 Dec 2012 01:01:25 +0000 (11:01 +1000)]
drm/nouveau/bios: rename DCB_GPIO_PWM_FAN to DCB_GPIO_FAN
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 7 Dec 2012 00:31:09 +0000 (10:31 +1000)]
drm/nouveau/bios: add support for parsing xpio table data
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 6 Dec 2012 05:44:23 +0000 (15:44 +1000)]
drm/nouveau: remove some more unnecessary legacy bios code
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 6 Dec 2012 05:32:56 +0000 (15:32 +1000)]
drm/nouveau: remove legacy vbios type detection
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 6 Dec 2012 05:17:12 +0000 (15:17 +1000)]
drm/nouveau/hwmon: create hwmon attributes under hwmon device in sysfs
From browsing my /sys, a few other things seem to do this, and it looks
cleaner this way too :)
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 6 Dec 2012 05:13:06 +0000 (15:13 +1000)]
drm/nouveau/hwmon: s/fan0/fan1/
Fan speed info now shown by sensors.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 6 Dec 2012 00:28:34 +0000 (10:28 +1000)]
drm/nouveau/therm: better transitions and debug logging
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Martin Peres [Tue, 20 Nov 2012 01:29:22 +0000 (02:29 +0100)]
drm/nouveau/doc: document the sysfs thermal management interface
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
projects / GitHub / LineageOS / android_kernel_samsung_universal7580.git / log