GitHub/LineageOS/android_kernel_motorola_exynos9610.git
9 years agocxgb4: Force uninitialized state if FW in adapter is unsupported
Hariprasad Shenai [Fri, 28 Aug 2015 05:47:12 +0000 (11:17 +0530)]
cxgb4: Force uninitialized state if FW in adapter is unsupported

Forcing uninitialized state allows us to upgrade and reinitialize
the adapter.

    FW_VERSION_T4 = 1.4.0.0
    FW_VERSION_T5 = 0.0.0.0
    FW_VERSION_T6 = 0.0.0.0
At this point driver supports above and greater than above version.

If FW in adapter < min FW_VERSION driver supports tries to upgrade the FW
If FW in adapter >= FW_VERSION driver supports then it follows normal path

Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-merge
David S. Miller [Fri, 28 Aug 2015 20:43:33 +0000 (13:43 -0700)]
Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-merge

Antonio Quartulli says:

====================
Included changes:
- code beautification
- remove obsolete 'deleted' attribute for bat-gw node
- increase internal version number
- prevent potential access to netdev object after deregistration
- set needed_head/tail_room for batman virtual interface
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoopenswitch: fix typo CONFIG_NF_CONNTRACK_LABEL
Valentin Rothberg [Fri, 28 Aug 2015 08:39:56 +0000 (10:39 +0200)]
openswitch: fix typo CONFIG_NF_CONNTRACK_LABEL

Fix typo in conntrack.c
s/CONFIG_NF_CONNTRACK_LABEL/CONFIG_NF_CONNTRACK_LABELS/

Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge branch 'vrf-inetpeer'
David S. Miller [Fri, 28 Aug 2015 20:32:37 +0000 (13:32 -0700)]
Merge branch 'vrf-inetpeer'

David Ahern says:

====================
net: Refactor inetpeer cache and add support for VRFs

Per Dave's comment on the version 1 patch adding VRF support to inetpeer
cache by explicitly making the address + index a key. Refactored the
inetpeer code in the process; mostly impacts the use by tcp_metrics.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: Add support for VRFs to inetpeer cache
David Ahern [Thu, 27 Aug 2015 23:07:03 +0000 (16:07 -0700)]
net: Add support for VRFs to inetpeer cache

inetpeer caches based on address only, so duplicate IP addresses within
a namespace return the same cached entry. Enhance the ipv4 address key
to contain both the IPv4 address and VRF device index.

Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: Refactor inetpeer address struct
David Ahern [Thu, 27 Aug 2015 23:07:02 +0000 (16:07 -0700)]
net: Refactor inetpeer address struct

Move the inetpeer_addr_base union to inetpeer_addr and drop
inetpeer_addr_base.

Both the a6 and in6_addr overlays are not needed; drop the __be32 version
and rename in6 to a6 for consistency with ipv4. Add a new u32 array to
the union which removes the need for the typecast in the compare function
and the use of a consistent arg for both ipv4 and ipv6 addresses which
makes the compare function more readable.

Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: Add helper function to compare inetpeer addresses
David Ahern [Thu, 27 Aug 2015 23:07:01 +0000 (16:07 -0700)]
net: Add helper function to compare inetpeer addresses

tcp_metrics and inetpeer both have functions to compare inetpeer
addresses. Consolidate into 1 version.

Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: Add set,get helpers for inetpeer addresses
David Ahern [Thu, 27 Aug 2015 23:07:00 +0000 (16:07 -0700)]
net: Add set,get helpers for inetpeer addresses

Use inetpeer set,get helpers in tcp_metrics rather than peeking into
the inetpeer_addr struct.

Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: Introduce ipv4_addr_hash and use it for tcp metrics
David Ahern [Thu, 27 Aug 2015 23:06:59 +0000 (16:06 -0700)]
net: Introduce ipv4_addr_hash and use it for tcp metrics

Refactors a common line into helper function.

Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: Add ethernet header for pass through VRF device
David Ahern [Thu, 27 Aug 2015 17:10:50 +0000 (10:10 -0700)]
net: Add ethernet header for pass through VRF device

The change to use a custom dst broke tcpdump captures on the VRF device:

$ tcpdump -n -i vrf10
...
05:32:29.009362 IP 10.2.1.254 > 10.2.1.2: ICMP echo request, id 21989, seq 1, length 64
05:32:29.009855 00:00:40:01:8d:36 > 45:00:00:54:d6:6f, ethertype Unknown (0x0a02), length 84:
0x0000:  0102 0a02 01fe 0000 9181 55e5 0001 bd11  ..........U.....
0x0010:  da55 0000 0000 bb5d 0700 0000 0000 1011  .U.....]........
0x0020:  1213 1415 1617 1819 1a1b 1c1d 1e1f 2021  ...............!
0x0030:  2223 2425 2627 2829 2a2b 2c2d 2e2f 3031  "#$%&'()*+,-./01
0x0040:  3233 3435 3637                           234567

Local packets going through the VRF device are missing an ethernet header.
Fix by adding one and then stripping it off before pushing back to the IP
stack. With this patch you get the expected dumps:

...
05:36:15.713944 IP 10.2.1.254 > 10.2.1.2: ICMP echo request, id 23795, seq 1, length 64
05:36:15.714160 IP 10.2.1.2 > 10.2.1.254: ICMP echo reply, id 23795, seq 1, length 64
...

Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet/xen-netfront: only napi_synchronize() if running
Chas Williams [Thu, 27 Aug 2015 16:28:46 +0000 (12:28 -0400)]
net/xen-netfront: only napi_synchronize() if running

If an interface isn't running napi_synchronize() will hang forever.

[  392.248403] rmmod           R  running task        0   359    343 0x00000000
[  392.257671]  ffff88003760fc88 ffff880037193b40 ffff880037193160 ffff88003760fc88
[  392.267644]  ffff880037610000 ffff88003760fcd8 0000000100014c22 ffffffff81f75c40
[  392.277524]  0000000000bc7010 ffff88003760fca8 ffffffff81796927 ffffffff81f75c40
[  392.287323] Call Trace:
[  392.291599]  [<ffffffff81796927>] schedule+0x37/0x90
[  392.298553]  [<ffffffff8179985b>] schedule_timeout+0x14b/0x280
[  392.306421]  [<ffffffff810f91b9>] ? irq_free_descs+0x69/0x80
[  392.314006]  [<ffffffff811084d0>] ? internal_add_timer+0xb0/0xb0
[  392.322125]  [<ffffffff81109d07>] msleep+0x37/0x50
[  392.329037]  [<ffffffffa00ec79a>] xennet_disconnect_backend.isra.24+0xda/0x390 [xen_netfront]
[  392.339658]  [<ffffffffa00ecadc>] xennet_remove+0x2c/0x80 [xen_netfront]
[  392.348516]  [<ffffffff81481c69>] xenbus_dev_remove+0x59/0xc0
[  392.356257]  [<ffffffff814e7217>] __device_release_driver+0x87/0x120
[  392.364645]  [<ffffffff814e7cf8>] driver_detach+0xb8/0xc0
[  392.371989]  [<ffffffff814e6e69>] bus_remove_driver+0x59/0xe0
[  392.379883]  [<ffffffff814e84f0>] driver_unregister+0x30/0x70
[  392.387495]  [<ffffffff814814b2>] xenbus_unregister_driver+0x12/0x20
[  392.395908]  [<ffffffffa00ed89b>] netif_exit+0x10/0x775 [xen_netfront]
[  392.404877]  [<ffffffff81124e08>] SyS_delete_module+0x1d8/0x230
[  392.412804]  [<ffffffff8179a8ee>] system_call_fastpath+0x12/0x71

Signed-off-by: Chas Williams <3chas3@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoIGMP: Inhibit reports for local multicast groups
Philip Downey [Thu, 27 Aug 2015 15:46:26 +0000 (16:46 +0100)]
IGMP: Inhibit reports for local multicast groups

The range of addresses between 224.0.0.0 and 224.0.0.255 inclusive, is
reserved for the use of routing protocols and other low-level topology
discovery or maintenance protocols, such as gateway discovery and
group membership reporting.  Multicast routers should not forward any
multicast datagram with destination addresses in this range,
regardless of its TTL.

Currently, IGMP reports are generated for this reserved range of
addresses even though a router will ignore this information since it
has no purpose.  However, the presence of reserved group addresses in
an IGMP membership report uses up network bandwidth and can also
obscure addresses of interest when inspecting membership reports using
packet inspection or debug messages.

Although the RFCs for the various version of IGMP (e.g.RFC 3376 for
v3) do not specify that the reserved addresses be excluded from
membership reports, it should do no harm in doing so.  In particular
there should be no adverse effect in any IGMP snooping functionality
since 224.0.0.x is specifically excluded as per RFC 4541 (IGMP and MLD
Snooping Switches Considerations) section 2.1.2. Data Forwarding
Rules:

    2) Packets with a destination IP (DIP) address in the 224.0.0.X
       range which are not IGMP must be forwarded on all ports.

IGMP reports for local multicast groups can now be optionally
inhibited by means of a system control variable (by setting the value
to zero) e.g.:
    echo 0 > /proc/sys/net/ipv4/igmp_link_local_mcast_reports

To retain backwards compatibility the previous behaviour is retained
by default on system boot or reverted by setting the value back to
non-zero e.g.:
    echo 1 >  /proc/sys/net/ipv4/igmp_link_local_mcast_reports

Signed-off-by: Philip Downey <pdowney@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agor8169: Add software counter for multicast packages
Corinna Vinschen [Thu, 27 Aug 2015 15:11:48 +0000 (17:11 +0200)]
r8169: Add software counter for multicast packages

The multicast hardware counter on 8168/8111 chips is only 32 bit while the
statistics in struct rtnl_link_stats64 are 64 bit.  Given that statistics
are requested on an irregular basis, an overflow of the hardware counter
can go unnoticed.  To count even very large numbers of multicast packets
reliably, add a software counter and remove previously applied code to
fill the multicast field requested by @rtl8169_get_stats64 with the values
read from the rx_multicast hardware counter.

Signed-off-by: Corinna Vinschen <vinschen@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
David S. Miller [Fri, 28 Aug 2015 04:45:31 +0000 (21:45 -0700)]
Merge git://git./linux/kernel/git/davem/net

9 years agoMerge tag 'powerpc-4.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc...
Linus Torvalds [Fri, 28 Aug 2015 00:59:17 +0000 (17:59 -0700)]
Merge tag 'powerpc-4.2-4' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:
 "Fix MSI/MSI-X on pseries from Guilherme"

* tag 'powerpc-4.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/PCI: Disable MSI/MSI-X interrupts at PCI probe time in OF case
  PCI: Make pci_msi_setup_pci_dev() non-static for use by arch code

9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Fri, 28 Aug 2015 00:52:38 +0000 (17:52 -0700)]
Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:
 "Some straggler bug fixes here:

   1) Netlink_sendmsg() doesn't check iterator type properly in mmap
      case, from Ken-ichirou MATSUZAWA.

   2) Don't sleep in atomic context in bcmgenet driver, from Florian
      Fainelli.

   3) The pfkey_broadcast() code patch can't actually ever use anything
      other than GFP_ATOMIC.  And the cases that right now pass
      GFP_KERNEL or similar will currently trigger an RCU splat.  Just
      use GFP_ATOMIC unconditionally.  From David Ahern.

   4) Fix FD bit timings handling in pcan_usb driver, from Marc
      Kleine-Budde.

   5) Cache dst leaked in ip6_gre tunnel removal, fix from Huaibin Wang.

   6) Traversal into drivers/net/ethernet/renesas should be triggered by
      CONFIG_NET_VENDOR_RENESAS, not a particular driver's config
      option.  From Kazuya Mizuguchi.

   7) Fix regression in handling of igmp_join errors in vxlan, from
      Marcelo Ricardo Leitner.

   8) Make phy_{read,write}_mmd_indirect() properly take the mdio_lock
      mutex when programming the registers.  From Russell King.

   9) Fix non-forced handling in u32_destroy(), from WANG Cong.

  10) Test the EVENT_NO_RUNTIME_PM flag before it is cleared in
      usbnet_stop(), from Eugene Shatokhin.

  11) In sfc driver, don't fetch statistics firmware isn't capable of,
      from Bert Kenward.

  12) Verify ASCONF address parameter location in SCTP, from Xin Long"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  sctp: donot reset the overall_error_count in SHUTDOWN_RECEIVE state
  sctp: asconf's process should verify address parameter is in the beginning
  sfc: only use vadaptor stats if firmware is capable
  net: phy: fixed: propagate fixed link values to struct
  usbnet: Get EVENT_NO_RUNTIME_PM bit before it is cleared
  drivers: net: xgene: fix: Oops in linkwatch_fire_event
  cls_u32: complete the check for non-forced case in u32_destroy()
  net: fec: use reinit_completion() in mdio accessor functions
  net: phy: add locking to phy_read_mmd_indirect()/phy_write_mmd_indirect()
  vxlan: re-ignore EADDRINUSE from igmp_join
  net: compile renesas directory if NET_VENDOR_RENESAS is configured
  ip6_gre: release cached dst on tunnel removal
  phylib: Make PHYs children of their MDIO bus, not the bus' parent.
  can: pcan_usb: don't provide CAN FD bittimings by non-FD adapters
  net: Fix RCU splat in af_key
  net: bcmgenet: fix uncleaned dma flags
  net: bcmgenet: Avoid sleeping in bcmgenet_timeout
  netlink: mmap: fix tx type check

9 years agoMerge branch 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdim...
Linus Torvalds [Fri, 28 Aug 2015 00:46:06 +0000 (17:46 -0700)]
Merge branch 'libnvdimm-fixes' of git://git./linux/kernel/git/nvdimm/nvdimm

Pull nvdimm fixlet from Dan Williams:
 "This is a libnvdimm ABI fixup.

  I pushed back on this change quite hard given the late date, that it
  appears to be purely cosmetic, sysfs is not necessarily meant to be a
  user friendly UI, and the kernel interprets the reversed polarity of
  the ACPI_NFIT_MEM_ARMED flag correctly.  When this flag is set, the
  energy source of an NVDIMM is not armed and any new writes to the DIMM
  may not be preserved.

  However, Bob Moore warned me that it is important to get these things
  named correctly wherever they appear otherwise we run the risk of a
  less than cautious firmware engineer implementing the polarity the
  wrong way.  Once a mistake like that escapes into production platforms
  the flag becomes useless and we need to move to a new bit position.

  Bob has agreed to take a change through ACPICA to rename
  ACPI_NFIT_MEM_ARMED to ACPI_NFIT_MEM_NOT_ARMED, and the patch below
  from Toshi brings the sysfs representation of these flags in line with
  their respective polarities.

  Please pull for 4.2 as this is the first kernel to expose the ACPI
  NFIT sysfs representation, and this is likely a kernel that firmware
  developers will be using for checking out their NVDIMM enabling"

* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  nfit: Clarify memory device state flags strings

9 years agoMerge branch 'iff_no_queue_fixups'
David S. Miller [Fri, 28 Aug 2015 00:14:30 +0000 (17:14 -0700)]
Merge branch 'iff_no_queue_fixups'

Phil Sutter says:

====================
fixup IFF_NO_QUEUE conversion

This series serves two purposes:

On one hand it fixes a quite embarrassing bug around the warning I added for
drivers still setting tx_queue_len = 0 to achieve noqueue operation. It turned
out to be quite useless as due to using alloc_netdev(), many in-kernel drivers
fell into the trap by accident, as well. Instead this place serves pretty well
as a sanitizing point to set IFF_NO_QUEUE for drivers not initializing
tx_queue_len, which in turn allows to drop all special treatment of the latter
being zero since that can not happen anymore without IFF_NO_QUEUE being set.

On the other hand, it provides a better solution for Eric Dumazet's concern
regarding how to assign noqueue to an interface which does not default to it
already. In order to make this possible, noqueue is being registered so users
can 'tc qd add dev eth0 root noqueue'. In addition, it resolves the ugly
situation of 'tc qd show' not showing noqueue. Finally, the former changes
allow for some code cleanup.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: sched: simplify attach_one_default_qdisc()
Phil Sutter [Thu, 27 Aug 2015 19:21:39 +0000 (21:21 +0200)]
net: sched: simplify attach_one_default_qdisc()

Now that noqueue qdisc can be attached just like any other qdisc, no
special treatment is necessary anymore when attaching it as default
qdisc.

This change has the added benefit that 'tc qdisc show' prints noqueue
instead of nothing for devices defaulting to noqueue.

Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: sched: register noqueue qdisc
Phil Sutter [Thu, 27 Aug 2015 19:21:38 +0000 (21:21 +0200)]
net: sched: register noqueue qdisc

This way users can attach noqueue just like any other qdisc using tc
without having to mess with tx_queue_len first.

Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: sched: ignore tx_queue_len when assigning default qdisc
Phil Sutter [Thu, 27 Aug 2015 19:21:37 +0000 (21:21 +0200)]
net: sched: ignore tx_queue_len when assigning default qdisc

Since alloc_netdev_mqs() sets IFF_NO_QUEUE for drivers not initializing
tx_queue_len, it is safe to assume that if tx_queue_len is zero,
dev->priv flags always contains IFF_NO_QUEUE.

Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: fix IFF_NO_QUEUE for drivers using alloc_netdev
Phil Sutter [Thu, 27 Aug 2015 19:21:36 +0000 (21:21 +0200)]
net: fix IFF_NO_QUEUE for drivers using alloc_netdev

Printing a warning in alloc_netdev_mqs() if tx_queue_len is zero and
IFF_NO_QUEUE not set is not appropriate since drivers may use one of the
alloc_netdev* macros instead of alloc_etherdev*, thereby not
intentionally leaving tx_queue_len uninitialized. Instead check here if
tx_queue_len is zero and set IFF_NO_QUEUE, so the value of tx_queue_len
can be ignored in net/sched_generic.c.

Fixes: 906470c ("net: warn if drivers set tx_queue_len = 0")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agosock: fix kernel doc error
Jean Sacren [Fri, 28 Aug 2015 00:05:49 +0000 (18:05 -0600)]
sock: fix kernel doc error

The symbol '__sk_reclaim' is not present in the current tree. Apparently
'__sk_reclaim' was meant to be '__sk_mem_reclaim', so fix it with the
right symbol name for the kernel doc.

Signed-off-by: Jean Sacren <sakiwit@gmail.com>
Cc: Hideo Aoki <haoki@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agosctp: donot reset the overall_error_count in SHUTDOWN_RECEIVE state
lucien [Wed, 26 Aug 2015 20:52:20 +0000 (04:52 +0800)]
sctp: donot reset the overall_error_count in SHUTDOWN_RECEIVE state

Commit f8d960524328 ("sctp: Enforce retransmission limit during shutdown")
fixed a problem with excessive retransmissions in the SHUTDOWN_PENDING by not
resetting the association overall_error_count.  This allowed the association
to better enforce assoc.max_retrans limit.

However, the same issue still exists when the association is in SHUTDOWN_RECEIVED
state.  In this state, HB-ACKs will continue to reset the overall_error_count
for the association would extend the lifetime of association unnecessarily.

This patch solves this by resetting the overall_error_count whenever the current
state is small then SCTP_STATE_SHUTDOWN_PENDING.  As a small side-effect, we
end up also handling SCTP_STATE_SHUTDOWN_ACK_SENT and SCTP_STATE_SHUTDOWN_SENT
states, but they are not really impacted because we disable Heartbeats in those
states.

Fixes: Commit f8d960524328 ("sctp: Enforce retransmission limit during shutdown")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet/mlx4_core: Fix unintialized variable used in error path
Carol L Soto [Thu, 27 Aug 2015 19:43:26 +0000 (14:43 -0500)]
net/mlx4_core: Fix unintialized variable used in error path

The uninitialized value name in mlx4_en_activate_cq was used in order
to print an error message. Fixing it by replacing it with cq->vector.

Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Carol L Soto <clsoto@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet/mlx4_core: Capping number of requested MSIXs to MAX_MSIX
Carol L Soto [Thu, 27 Aug 2015 19:43:25 +0000 (14:43 -0500)]
net/mlx4_core: Capping number of requested MSIXs to MAX_MSIX

We currently manage IRQs in pool_bm which is a bit field
of MAX_MSIX bits. Thus, allocating more than MAX_MSIX
interrupts can't be managed in pool_bm.
Fixing this by capping number of requested MSIXs to
MAX_MSIX.

Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Carol L Soto <clsoto@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agobridge: fdb: rearrange net_bridge_fdb_entry
Nikolay Aleksandrov [Thu, 27 Aug 2015 21:19:20 +0000 (14:19 -0700)]
bridge: fdb: rearrange net_bridge_fdb_entry

While looking into fixing the local entries scalability issue I noticed
that the structure is badly arranged because vlan_id would fall in a
second cache line while keeping rcu which is used only when deleting
in the first, so re-arrange the structure and push rcu to the end so we
can get 16 bytes which can be used for other fields (by pushing rcu
fully in the second 64 byte chunk). With this change all the core
necessary information when doing fdb lookups will be available in a
single cache line.

pahole before (note vlan_id):
struct net_bridge_fdb_entry {
struct hlist_node          hlist;                /*     0    16 */
struct net_bridge_port *   dst;                  /*    16     8 */
struct callback_head       rcu;                  /*    24    16 */
long unsigned int          updated;              /*    40     8 */
long unsigned int          used;                 /*    48     8 */
mac_addr                   addr;                 /*    56     6 */
unsigned char              is_local:1;           /*    62: 7  1 */
unsigned char              is_static:1;          /*    62: 6  1 */
unsigned char              added_by_user:1;      /*    62: 5  1 */
unsigned char              added_by_external_learn:1; /*    62: 4  1 */

/* XXX 4 bits hole, try to pack */
/* XXX 1 byte hole, try to pack */

/* --- cacheline 1 boundary (64 bytes) --- */
__u16                      vlan_id;              /*    64     2 */

/* size: 72, cachelines: 2, members: 11 */
/* sum members: 65, holes: 1, sum holes: 1 */
/* bit holes: 1, sum bit holes: 4 bits */
/* padding: 6 */
/* last cacheline: 8 bytes */
}

pahole after (note vlan_id):
struct net_bridge_fdb_entry {
struct hlist_node          hlist;                /*     0    16 */
struct net_bridge_port *   dst;                  /*    16     8 */
long unsigned int          updated;              /*    24     8 */
long unsigned int          used;                 /*    32     8 */
mac_addr                   addr;                 /*    40     6 */
__u16                      vlan_id;              /*    46     2 */
unsigned char              is_local:1;           /*    48: 7  1 */
unsigned char              is_static:1;          /*    48: 6  1 */
unsigned char              added_by_user:1;      /*    48: 5  1 */
unsigned char              added_by_external_learn:1; /*    48: 4  1 */

/* XXX 4 bits hole, try to pack */
/* XXX 7 bytes hole, try to pack */

struct callback_head       rcu;                  /*    56    16 */
/* --- cacheline 1 boundary (64 bytes) was 8 bytes ago --- */

/* size: 72, cachelines: 2, members: 11 */
/* sum members: 65, holes: 1, sum holes: 7 */
/* bit holes: 1, sum bit holes: 4 bits */
/* last cacheline: 8 bytes */
}

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge branch 'ovs-v6-build-err'
David S. Miller [Thu, 27 Aug 2015 23:35:51 +0000 (16:35 -0700)]
Merge branch 'ovs-v6-build-err'

Joe Stringer says:

====================
OPENVSWITCH && !NETFILTER build fix.

Fix issues reported by kbuild test robot:

All error/warnings (new ones prefixed by >>):

   net/openvswitch/actions.c: In function 'ovs_fragment':
>> net/openvswitch/actions.c:705:16: error: implicit declaration of
function 'nf_get_ipv6_ops' [-Werror=implicit-function-declaration]
      const struct nf_ipv6_ops *v6ops = nf_get_ipv6_ops();
                   ^
>> net/openvswitch/actions.c:705:37: warning: initialization makes
pointer from integer without a cast
      const struct nf_ipv6_ops *v6ops = nf_get_ipv6_ops();
                                        ^
>> net/openvswitch/actions.c:707:19: error: storage size of 'ovs_rt'
isn't known
      struct rt6_info ovs_rt;
                      ^
>> net/openvswitch/actions.c:724:8: error: dereferencing pointer to
incomplete type
      v6ops->fragment(skb->sk, skb, ovs_vport_output);
           ^
>> net/openvswitch/actions.c:707:19: warning: unused variable 'ovs_rt'
[-Wunused-variable]
      struct rt6_info ovs_rt;
                      ^
   cc1: some warnings being treated as errors
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoopenvswitch: Include ip6_fib.h.
Joe Stringer [Thu, 27 Aug 2015 22:25:46 +0000 (15:25 -0700)]
openvswitch: Include ip6_fib.h.

kbuild test robot reports that certain configurations will not
automatically pick up on the "struct rt6_info" definition, so explicitly
include the header for this structure.

Fixes: 7f8a436 "openvswitch: Add conntrack action"
Signed-off-by: Joe Stringer <joestringer@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonetfilter: Define v6ops in !CONFIG_NETFILTER case.
Joe Stringer [Thu, 27 Aug 2015 22:25:45 +0000 (15:25 -0700)]
netfilter: Define v6ops in !CONFIG_NETFILTER case.

When CONFIG_OPENVSWITCH is set, and CONFIG_NETFILTER is not set, the
openvswitch IPv6 fragmentation handling cannot refer to ipv6_ops because
it isn't defined. Add a dummy version to avoid #ifdefs in source files.

Fixes: 7f8a436 "openvswitch: Add conntrack action"
Signed-off-by: Joe Stringer <joestringer@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge branch 'mlxsw-small-updates'
David S. Miller [Thu, 27 Aug 2015 23:31:17 +0000 (16:31 -0700)]
Merge branch 'mlxsw-small-updates'

Jiri Pirko says:

====================
mlxsw: small driver update

Ido Schimmel (2):
  mlxsw: Remove duplicate included header
  mlxsw: Make mailboxes 4KB aligned

Jiri Pirko (1):
  mlxsw: adjust transmit fail log message level in __mlxsw_emad_transmit
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agomlxsw: Make mailboxes 4KB aligned
Ido Schimmel [Thu, 27 Aug 2015 15:59:57 +0000 (17:59 +0200)]
mlxsw: Make mailboxes 4KB aligned

The HW-SW contract requires mailboxes passed to the firmware to be 4KB
aligned. Previously, these mailboxes were mapped using streaming DMA
routines, which do not guarantee the bus addresses to be 4KB aligned.
Under certain conditions this constraint was indeed violated and errors
were observed.

By using consistent DMA mapping routines together with a mailbox size of
4KB we are guaranteed not to violate the constraint.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agomlxsw: adjust transmit fail log message level in __mlxsw_emad_transmit
Jiri Pirko [Thu, 27 Aug 2015 15:59:56 +0000 (17:59 +0200)]
mlxsw: adjust transmit fail log message level in __mlxsw_emad_transmit

When transmit fails, it is an error, not a warning.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Elad Raz <eladr@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agomlxsw: Remove duplicate included header
Ido Schimmel [Thu, 27 Aug 2015 15:59:55 +0000 (17:59 +0200)]
mlxsw: Remove duplicate included header

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Elad Raz <eladr@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge branch 'rocker-master-change'
David S. Miller [Thu, 27 Aug 2015 23:28:35 +0000 (16:28 -0700)]
Merge branch 'rocker-master-change'

Jiri Pirko says:

====================
rocker: make master change handling nicer

Jiri Pirko (6):
  net: introduce change upper device notifier change info
  net: add netif_is_bridge_master helper
  net: add netif_is_ovs_master helper with IFF_OPENVSWITCH private flag
  net: kill long time unused bonding private flags
  rocker: use new helper to figure out master kind
  rocker: use change upper info
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agorocker: use change upper info
Jiri Pirko [Thu, 27 Aug 2015 07:31:23 +0000 (09:31 +0200)]
rocker: use change upper info

Since now information about changed upper is passed along, benefit from
that and use this info directly.

This also fixes possible issues that could happen when non-master device
is added (current code does not distinguish between master and non-master
upper device).

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Scott Feldman <sfeldma@gmail.com
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agorocker: use new helper to figure out master kind
Jiri Pirko [Thu, 27 Aug 2015 07:31:22 +0000 (09:31 +0200)]
rocker: use new helper to figure out master kind

Looking at rtnl kind string is kind of ugly. So use new helpers to do
this in nicer way.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Scott Feldman <sfeldma@gmail.com
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: kill long time unused bonding private flags
Jiri Pirko [Thu, 27 Aug 2015 07:31:21 +0000 (09:31 +0200)]
net: kill long time unused bonding private flags

We don't use them for years, just kill them now.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: add netif_is_ovs_master helper with IFF_OPENVSWITCH private flag
Jiri Pirko [Thu, 27 Aug 2015 07:31:20 +0000 (09:31 +0200)]
net: add netif_is_ovs_master helper with IFF_OPENVSWITCH private flag

Add this helper so code can easily figure out if netdev is openswitch.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: add netif_is_bridge_master helper
Jiri Pirko [Thu, 27 Aug 2015 07:31:19 +0000 (09:31 +0200)]
net: add netif_is_bridge_master helper

Add this helper so code can easily figure out if netdev is a bridge.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: introduce change upper device notifier change info
Jiri Pirko [Thu, 27 Aug 2015 07:31:18 +0000 (09:31 +0200)]
net: introduce change upper device notifier change info

Add info that is passed along with NETDEV_CHANGEUPPER event.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agovirtio-net: avoid unnecessary sg initialzation
Jason Wang [Thu, 27 Aug 2015 06:53:06 +0000 (14:53 +0800)]
virtio-net: avoid unnecessary sg initialzation

Usually an skb does not have up to MAX_SKB_FRAGS frags. So no need to
initialize the unuse part of sg. This patch initialize the sg based on
the real number it will used:

- during xmit, it could be inferred from nr_frags and can_push.
- for small receive buffer, it will also be 2.

Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge branch 'geneve-consolidation'
David S. Miller [Thu, 27 Aug 2015 22:42:48 +0000 (15:42 -0700)]
Merge branch 'geneve-consolidation'

Pravin B Shelar says:

====================
Geneve: Add support for tunnel metadata mode

Following patches adds support for Geneve tunnel metadata
mode. OVS can make use of Geneve net-device with tunnel
metadata API from kernel.

This also allows us to consolidate Geneve implementation
from two kernel modules geneve_core and geneve to single
geneve module. geneve_core module was targeted to share
Geneve encap and decap code between Geneve netdevice and
OVS Geneve tunnel implementation, Since OVS no longer
needs these API, Geneve code can be consolidated into
single geneve module.

v3-v4:
- Drop NETIF_F_NETNS_LOCAL feature.
- Fix geneve device newlink check

v2-v3:
- make tunnel medata device and regular device mutually exclusive.
- Fix Kconfig dependency for Geneve.
- Fix dst-port netlink encoding.
- drop changelink patch.

v1-v2:
- Replaced per hash table tunnel pointer (metadata enabled) with flag.
- Added support for changelink.
- Improve geneve device route lookup with more parameters.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agogeneve: Move device hash table to geneve socket.
Pravin B Shelar [Thu, 27 Aug 2015 06:46:55 +0000 (23:46 -0700)]
geneve: Move device hash table to geneve socket.

This change simplifies Geneve Tunnel hash table management.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Reviewed-by: Jesse Gross <jesse@nicira.com>
Reviewed-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agogeneve: Consolidate Geneve functionality in single module.
Pravin B Shelar [Thu, 27 Aug 2015 06:46:54 +0000 (23:46 -0700)]
geneve: Consolidate Geneve functionality in single module.

geneve_core module handles send and receive functionality.
This way OVS could use the Geneve API. Now with use of
tunnel meatadata mode OVS can directly use Geneve netdevice.
So there is no need for separate module for Geneve. Following
patch consolidates Geneve protocol processing in single module.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Reviewed-by: Jesse Gross <jesse@nicira.com>
Acked-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoopenvswitch: Use Geneve device.
Pravin B Shelar [Thu, 27 Aug 2015 06:46:53 +0000 (23:46 -0700)]
openvswitch: Use Geneve device.

With help of tunnel metadata mode OVS can directly use
Geneve devices to implement Geneve tunnels.
This patch removes all of the OVS specific Geneve code
and make OVS use a Geneve net_device. Basic geneve vport
is still there to handle compatibility with current
userspace application.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Reviewed-by: Jesse Gross <jesse@nicira.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agogeneve: Add support to collect tunnel metadata.
Pravin B Shelar [Thu, 27 Aug 2015 06:46:52 +0000 (23:46 -0700)]
geneve: Add support to collect tunnel metadata.

Following patch create new tunnel flag which enable
tunnel metadata collection on given device. These devices
can be used by tunnel metadata based routing or by OVS.
Geneve Consolidation patch get rid of collect_md_tun to
simplify tunnel lookup further.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Reviewed-by: Jesse Gross <jesse@nicira.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agogeneve: Make dst-port configurable.
Pravin B Shelar [Thu, 27 Aug 2015 06:46:51 +0000 (23:46 -0700)]
geneve: Make dst-port configurable.

Add netlink interface to configure Geneve UDP port number.
So that user can configure it for a Gevene device.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Reviewed-by: Jesse Gross <jesse@nicira.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Acked-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agotunnel: introduce udp_tun_rx_dst()
Pravin B Shelar [Thu, 27 Aug 2015 06:46:50 +0000 (23:46 -0700)]
tunnel: introduce udp_tun_rx_dst()

Introduce function udp_tun_rx_dst() to initialize tunnel dst on
receive path.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Reviewed-by: Jesse Gross <jesse@nicira.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agogeneve: Use skb mark and protocol to lookup route.
Pravin B Shelar [Thu, 27 Aug 2015 06:46:49 +0000 (23:46 -0700)]
geneve: Use skb mark and protocol to lookup route.

On packet transmit path geneve need to lookup route. Following
patch improves route lookup using more parameters.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Reviewed-by: Jesse Gross <jesse@nicira.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Acked-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agogeneve: Initialize ethernet address in device setup.
Pravin B Shelar [Thu, 27 Aug 2015 06:46:48 +0000 (23:46 -0700)]
geneve: Initialize ethernet address in device setup.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Reviewed-by: Jesse Gross <jesse@nicira.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Acked-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agobridge: Add netlink support for vlan_protocol attribute
Toshiaki Makita [Thu, 27 Aug 2015 06:32:26 +0000 (15:32 +0900)]
bridge: Add netlink support for vlan_protocol attribute

This enables bridge vlan_protocol to be configured through netlink.

When CONFIG_BRIDGE_VLAN_FILTERING is disabled, kernel behaves the
same way as this feature is not implemented.

Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agobnx2x: Add new device ids under the Qlogic vendor
Yuval Mintz [Thu, 27 Aug 2015 05:03:08 +0000 (08:03 +0300)]
bnx2x: Add new device ids under the Qlogic vendor

This adds support for 3 new PCI device combinations -
1077:16a1, 1077:16a4 and 1077:16ad.

Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agosmsc911x: Ignore error return from device_get_phy_mode()
Guenter Roeck [Thu, 27 Aug 2015 03:27:05 +0000 (20:27 -0700)]
smsc911x: Ignore error return from device_get_phy_mode()

Commit 62ee783bf1f8 ("smsc911x: Fix crash seen if neither ACPI nor OF is
configured or used") introduces an error check for the return value from
device_get_phy_mode() and bails out if there is an error. Unfortunately,
there are configurations where no phy is configured. Those configurations
now fail.

To fix the problem, accept error returns from device_get_phy_mode(),
and use the return value from device_property_read_u32() to determine
if there is a suitable firmware interface to read the configuration.

Fixes: 62ee783bf1f8 ("smsc911x: Fix crash seen if neither ACPI nor OF is configured or used")
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agodevice property: Return -ENXIO if there is no suitable FW interface
Guenter Roeck [Thu, 27 Aug 2015 03:27:04 +0000 (20:27 -0700)]
device property: Return -ENXIO if there is no suitable FW interface

Return -ENXIO if device property array access functions don't find
a suitable firmware interface.

This lets drivers decide if they should use available platform data
instead.

Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: sched: consolidate tc_classify{,_compat}
Daniel Borkmann [Wed, 26 Aug 2015 21:00:06 +0000 (23:00 +0200)]
net: sched: consolidate tc_classify{,_compat}

For classifiers getting invoked via tc_classify(), we always need an
extra function call into tc_classify_compat(), as both are being
exported as symbols and tc_classify() itself doesn't do much except
handling of reclassifications when tp->classify() returned with
TC_ACT_RECLASSIFY.

CBQ and ATM are the only qdiscs that directly call into tc_classify_compat(),
all others use tc_classify(). When tc actions are being configured
out in the kernel, tc_classify() effectively does nothing besides
delegating.

We could spare this layer and consolidate both functions. pktgen on
single CPU constantly pushing skbs directly into the netif_receive_skb()
path with a dummy classifier on ingress qdisc attached, improves
slightly from 22.3Mpps to 23.1Mpps.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next...
David S. Miller [Thu, 27 Aug 2015 21:06:09 +0000 (14:06 -0700)]
Merge branch 'master' of git://git./linux/kernel/git/jkirsher/next-queue

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2015-08-26

This series contains updates to i40e and i40evf only.

Anjali provides a fix for i40e where the part is not receiving multicast
or VLAN tagged packets when in promiscuous mode.  This can occur when a
software bridge is created on top of the device.  Fixed the legacy and MSI
interrupt mode in the driver, which was non-existent before since we
were assuming MSIX was the only mode that the driver ran in.  Fixed the
i40evf driver, where the wrong defines were getting used in the VF
driver.

Mitch fixes a sparse warning about comparing __le16 to u16 so use
le16_to_cpu() to resolve the warning.  Also fixed a dyslexic spelling
of invalid.

Shannon adds port.crc_errors to receive CRC error counter, since it
is a receive counter.

Catherine provides a fix to move the stopping of the service task and
flow director to i40e_shutdown() instead of i40e_suspend().

Greg fixes the ethtool offline diagnostic with netqueues, which just need
to be treated the same as virtual functions when someone wants to run the
ethtool offline diagnostic test.  Also fixed up code comments for the
i40e ethtool diagnostic test function.  Cleans up redundant and unneeded
messages, since the kernel notifies all VXLAN capable registered drivers,
so no need to log this.

Neerav adds the ability to update statistics per VEB per traffic class
and dump it via ethtool.

Jingjing adds support for virtual channel offload to support receive
polling mode in the VF driver.

v2: dropped patch which added helper functions into a header, feedback from
    David Miller was to make the functions constant to reduce the driver
    footprint, so remove the patch while Anjali works on making the requested
    changes.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agosctp: asconf's process should verify address parameter is in the beginning
lucien [Thu, 27 Aug 2015 08:26:34 +0000 (16:26 +0800)]
sctp: asconf's process should verify address parameter is in the beginning

in sctp_process_asconf(), we get address parameter from the beginning of
the addip params. but we never check if it's really there. if the addr
param is not there, it still can pass sctp_verify_asconf(), then to be
handled by sctp_process_asconf(), it will not be safe.

so add a code in sctp_verify_asconf() to check the address parameter is in
the beginning, or return false to send abort.

note that this can also detect multiple address parameters, and reject it.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <mleitner@redhat.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agosmsc9194: Remove uncompilable #if 0'd use of pr_dbg
Joe Perches [Wed, 26 Aug 2015 18:49:35 +0000 (11:49 -0700)]
smsc9194: Remove uncompilable #if 0'd use of pr_dbg

No pr_dbg method exists.

While this code is #if 0'd, it'd be nicer to
use the generic hex_dump, so use it instead.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge branch 'xgene-tso'
David S. Miller [Thu, 27 Aug 2015 20:51:38 +0000 (13:51 -0700)]
Merge branch 'xgene-tso'

Iyappan Subramanian says:

====================
drivers: net: xgene: Add TSO support

Adding TSO support for 10GbE

iperf Tx data rate without TSO: 3.42 Gbps
                      with TSO: 9.41 Gbps

v2: Address review comments from v1
    - skb_linearize() if headers doesn't fit in 3 hardware buffers

v1:
* Initial version
====================

Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
9 years agodrivers: net: xgene: Adding support for TSO
Iyappan Subramanian [Wed, 26 Aug 2015 18:48:06 +0000 (11:48 -0700)]
drivers: net: xgene: Adding support for TSO

Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agodrivers: net: xgene: Preparatory patch for TSO support
Iyappan Subramanian [Wed, 26 Aug 2015 18:48:05 +0000 (11:48 -0700)]
drivers: net: xgene: Preparatory patch for TSO support

- Rearranged descriptor writes
- Moved increment command write to xgene_enet_setup_tx_desc

Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge branch 'ovs-conntrack'
David S. Miller [Thu, 27 Aug 2015 18:40:44 +0000 (11:40 -0700)]
Merge branch 'ovs-conntrack'

Joe Stringer says:

====================
OVS conntrack support

The goal of this series is to allow OVS to send packets through the Linux
kernel connection tracker, and subsequently match on fields populated by
conntrack. This functionality is enabled through a new
CONFIG_OPENVSWITCH_CONNTRACK option.

This version addresses the feedback from v5, primarily checking the behaviour
is correct with different configurations such as disabling
CONFIG_OPENVSWITCH_CONNTRACK or disabling individual conntrack features like
connlabels.

The branch below has been updated with the corresponding userspace pieces:
https://github.com/joestringer/ovs dev/ct_20150818
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoopenvswitch: Allow attaching helpers to ct action
Joe Stringer [Wed, 26 Aug 2015 18:31:53 +0000 (11:31 -0700)]
openvswitch: Allow attaching helpers to ct action

Add support for using conntrack helpers to assist protocol detection.
The new OVS_CT_ATTR_HELPER attribute of the CT action specifies a helper
to be used for this connection. If no helper is specified, then helpers
will be automatically applied as per the sysctl configuration of
net.netfilter.nf_conntrack_helper.

The helper may be specified as part of the conntrack action, eg:
ct(helper=ftp). Initial packets for related connections should be
committed to allow later packets for the flow to be considered
established.

Example ovs-ofctl flows allowing FTP connections from ports 1->2:
in_port=1,tcp,action=ct(helper=ftp,commit),2
in_port=2,tcp,ct_state=-trk,action=ct(recirc)
in_port=2,tcp,ct_state=+trk-new+est,action=1
in_port=2,tcp,ct_state=+trk+rel,action=1

Signed-off-by: Joe Stringer <joestringer@nicira.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoopenvswitch: Allow matching on conntrack label
Joe Stringer [Wed, 26 Aug 2015 18:31:52 +0000 (11:31 -0700)]
openvswitch: Allow matching on conntrack label

Allow matching and setting the ct_label field. As with ct_mark, this is
populated by executing the CT action. The label field may be modified by
specifying a label and mask nested under the CT action. It is stored as
metadata attached to the connection. Label modification occurs after
lookup, and will only persist when the conntrack entry is committed by
providing the COMMIT flag to the CT action. Labels are currently fixed
to 128 bits in size.

Signed-off-by: Joe Stringer <joestringer@nicira.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonetfilter: connlabels: Export setting connlabel length
Joe Stringer [Wed, 26 Aug 2015 18:31:51 +0000 (11:31 -0700)]
netfilter: connlabels: Export setting connlabel length

Add functions to change connlabel length into nf_conntrack_labels.c so
they may be reused by other modules like OVS and nftables without
needing to jump through xt_match_check() hoops.

Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Joe Stringer <joestringer@nicira.com>
Acked-by: Florian Westphal <fw@strlen.de>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonetfilter: Always export nf_connlabels_replace()
Joe Stringer [Wed, 26 Aug 2015 18:31:50 +0000 (11:31 -0700)]
netfilter: Always export nf_connlabels_replace()

The following patches will reuse this code from OVS.

Signed-off-by: Joe Stringer <joestringer@nicira.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoopenvswitch: Allow matching on conntrack mark
Joe Stringer [Wed, 26 Aug 2015 18:31:49 +0000 (11:31 -0700)]
openvswitch: Allow matching on conntrack mark

Allow matching and setting the ct_mark field. As with ct_state and
ct_zone, these fields are populated when the CT action is executed. To
write to this field, a value and mask can be specified as a nested
attribute under the CT action. This data is stored with the conntrack
entry, and is executed after the lookup occurs for the CT action. The
conntrack entry itself must be committed using the COMMIT flag in the CT
action flags for this change to persist.

Signed-off-by: Justin Pettit <jpettit@nicira.com>
Signed-off-by: Joe Stringer <joestringer@nicira.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoopenvswitch: Add conntrack action
Joe Stringer [Wed, 26 Aug 2015 18:31:48 +0000 (11:31 -0700)]
openvswitch: Add conntrack action

Expose the kernel connection tracker via OVS. Userspace components can
make use of the CT action to populate the connection state (ct_state)
field for a flow. This state can be subsequently matched.

Exposed connection states are OVS_CS_F_*:
- NEW (0x01) - Beginning of a new connection.
- ESTABLISHED (0x02) - Part of an existing connection.
- RELATED (0x04) - Related to an established connection.
- INVALID (0x20) - Could not track the connection for this packet.
- REPLY_DIR (0x40) - This packet is in the reply direction for the flow.
- TRACKED (0x80) - This packet has been sent through conntrack.

When the CT action is executed by itself, it will send the packet
through the connection tracker and populate the ct_state field with one
or more of the connection state flags above. The CT action will always
set the TRACKED bit.

When the COMMIT flag is passed to the conntrack action, this specifies
that information about the connection should be stored. This allows
subsequent packets for the same (or related) connections to be
correlated with this connection. Sending subsequent packets for the
connection through conntrack allows the connection tracker to consider
the packets as ESTABLISHED, RELATED, and/or REPLY_DIR.

The CT action may optionally take a zone to track the flow within. This
allows connections with the same 5-tuple to be kept logically separate
from connections in other zones. If the zone is specified, then the
"ct_zone" match field will be subsequently populated with the zone id.

IP fragments are handled by transparently assembling them as part of the
CT action. The maximum received unit (MRU) size is tracked so that
refragmentation can occur during output.

IP frag handling contributed by Andy Zhou.

Based on original design by Justin Pettit.

Signed-off-by: Joe Stringer <joestringer@nicira.com>
Signed-off-by: Justin Pettit <jpettit@nicira.com>
Signed-off-by: Andy Zhou <azhou@nicira.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agodst: Add __skb_dst_copy() variation
Joe Stringer [Wed, 26 Aug 2015 18:31:47 +0000 (11:31 -0700)]
dst: Add __skb_dst_copy() variation

This variation on skb_dst_copy() doesn't require two skbs.

Signed-off-by: Joe Stringer <joestringer@nicira.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoipv6: Export nf_ct_frag6_gather()
Joe Stringer [Wed, 26 Aug 2015 18:31:46 +0000 (11:31 -0700)]
ipv6: Export nf_ct_frag6_gather()

Signed-off-by: Joe Stringer <joestringer@nicira.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoopenvswitch: Move MASKED* macros to datapath.h
Joe Stringer [Wed, 26 Aug 2015 18:31:45 +0000 (11:31 -0700)]
openvswitch: Move MASKED* macros to datapath.h

This will allow the ovs-conntrack code to reuse these macros.

Signed-off-by: Joe Stringer <joestringer@nicira.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoopenvswitch: Serialize acts with original netlink len
Joe Stringer [Wed, 26 Aug 2015 18:31:44 +0000 (11:31 -0700)]
openvswitch: Serialize acts with original netlink len

Previously, we used the kernel-internal netlink actions length to
calculate the size of messages to serialize back to userspace.
However,the sw_flow_actions may not be formatted exactly the same as the
actions on the wire, so store the original actions length when
de-serializing and re-use the original length when serializing.

Signed-off-by: Joe Stringer <joestringer@nicira.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonfit: Clarify memory device state flags strings
Toshi Kani [Wed, 26 Aug 2015 16:20:23 +0000 (10:20 -0600)]
nfit: Clarify memory device state flags strings

ACPI 6.0 NFIT Memory Device State Flags in Table 5-129 defines
NVDIMM status as follows.  These bits indicate multiple info,
such as failures, pending event, and capability.

  Bit [0] set to 1 to indicate that the previous SAVE to the
  Memory Device failed.
  Bit [1] set to 1 to indicate that the last RESTORE from the
  Memory Device failed.
  Bit [2] set to 1 to indicate that platform flush of data to
  Memory Device failed. As a result, the restored data content
  may be inconsistent even if SAVE and RESTORE do not indicate
  failure.
  Bit [3] set to 1 to indicate that the Memory Device is observed
  to be not armed prior to OSPM hand off. A Memory Device is
  considered armed if it is able to accept persistent writes.
  Bit [4] set to 1 to indicate that the Memory Device observed
  SMART and health events prior to OSPM handoff.

/sys/bus/nd/devices/nmemX/nfit/flags shows this flags info.
The output strings associated with the bits are "save", "restore",
"smart", etc., which can be confusing as they may be interpreted
as positive status, i.e. save succeeded.

Change also the dev_info() message in acpi_nfit_register_dimms()
to be consistent with the sysfs flags strings.

Reported-by: Robert Elliott <elliott@hp.com>
Signed-off-by: Toshi Kani <toshi.kani@hp.com>
[ross: rename 'not_arm' to 'not_armed']
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
[djbw: defer adding bit5, HEALTH_ENABLED, for now]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
9 years agobgmac: support up to 3 cores (devices) on a bus
Rafał Miłecki [Wed, 26 Aug 2015 15:53:45 +0000 (17:53 +0200)]
bgmac: support up to 3 cores (devices) on a bus

Broadcom buses may have more than 1 Ethernet device. This is used e.g.
to have few interfaces connected to different switch ports. So far we
saw chipsets with only 2 devices (e.g. BCM4706) but recent ones have
up to 3 (e.g. Netgear R8000 uses 3rd interface for most of switch
traffic, lower interfaces are for some kind of offloading).

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agosfc: only use vadaptor stats if firmware is capable
Bert Kenward [Wed, 26 Aug 2015 15:39:03 +0000 (16:39 +0100)]
sfc: only use vadaptor stats if firmware is capable

Some of the stats handling code differs based on SR-IOV support,
and SRIOV support is only available if full-featured firmware is
used.
Do not use vadaptor stats if firmware mode is not set to
full-featured.

Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge tag 'wireless-drivers-next-for-davem-2015-08-26' of git://git.kernel.org/pub...
David S. Miller [Thu, 27 Aug 2015 18:25:56 +0000 (11:25 -0700)]
Merge tag 'wireless-drivers-next-for-davem-2015-08-26' of git://git./linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
Major changes:

iwlwifi:

* new Tx power firmware API
* bump max firmware API to 17
* fix bug in debug prints
* static checker fix
* fix unused defines
* fix command list on newest firmware

brcmfmac:

* support NVRAM loading for bcm47xx platform
* new debugfs entry for msgbuf protocol layer used with PCIe devices

ath10k:

* add spectral scan support for qca99x0
* add qca6164 support
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: phy: fixed: propagate fixed link values to struct
Madalin Bucur [Wed, 26 Aug 2015 14:58:47 +0000 (17:58 +0300)]
net: phy: fixed: propagate fixed link values to struct

The fixed link values parsed from the device tree are stored in
the struct fixed_phy member status. The struct phy_device members
speed, duplex were not updated.

Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agobatman-adv: turn batadv_neigh_node_get() into local function
Marek Lindner [Tue, 4 Aug 2015 15:31:44 +0000 (23:31 +0800)]
batman-adv: turn batadv_neigh_node_get() into local function

commit c214ebe1eb29 ("batman-adv: move neigh_node list add into
batadv_neigh_node_new()") removed external calls to
batadv_neigh_node_get().

Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
9 years agobatman-adv: Add lower layer needed_(head|tail)room to own ones
Sven Eckelmann [Fri, 7 Aug 2015 17:28:42 +0000 (19:28 +0200)]
batman-adv: Add lower layer needed_(head|tail)room to own ones

The maximum of hard_header_len and maximum of all needed_(head|tail)room of
all slave interfaces of a batman-adv device must be used to define the
batman-adv device needed_(head|tail)room. This is required to avoid too
small buffer problems when these slave devices try to send the encapsulated
packet in a tx path without the possibility to resize the skbuff.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
9 years agobatman-adv: don't access unregistered net_device object
Antonio Quartulli [Tue, 4 Aug 2015 20:26:19 +0000 (22:26 +0200)]
batman-adv: don't access unregistered net_device object

In batadv_hardif_disable_interface() there is a call to
batadv_softif_destroy_sysfs() which in turns invokes
unregister_netdevice() on the soft_iface.
After this point we cannot rely on the soft_iface object
anymore because it might get free'd by the netdev periodic
routine at any time.

For this reason the netdev_upper_dev_unlink(.., soft_iface) call
is moved before the invocation of batadv_softif_destroy_sysfs() so
that we can be sure that the soft_iface object is still valid.

Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
9 years agobatman-adv: Start new development cycle
Simon Wunderlich [Tue, 4 Aug 2015 12:43:16 +0000 (14:43 +0200)]
batman-adv: Start new development cycle

Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
9 years agobatman-adv: fix gateway client style issues
Simon Wunderlich [Tue, 4 Aug 2015 13:44:06 +0000 (15:44 +0200)]
batman-adv: fix gateway client style issues

commit 0511575c4d03 ("batman-adv: remove obsolete deleted attribute for
gateway node") incorrectly added an empy line and forgot to remove an
include.

Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
9 years agobatman-adv: rearrange batadv_neigh_node_new() arguments to follow convention
Marek Lindner [Sat, 25 Jul 2015 20:59:15 +0000 (04:59 +0800)]
batman-adv: rearrange batadv_neigh_node_new() arguments to follow convention

Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Acked-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
9 years agobatman-adv: remove obsolete deleted attribute for gateway node
Simon Wunderlich [Mon, 3 Aug 2015 17:13:58 +0000 (19:13 +0200)]
batman-adv: remove obsolete deleted attribute for gateway node

With rcu, the gateway node deleted attribute is not needed anymore. In
fact, it may delay the free of the gateway node and its referenced
structures. Therefore remove it altogether and simplify purging as well.

Signed-off-by: Simon Wunderlich <simon@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
9 years agobatman-adv: move neigh_node list add into batadv_neigh_node_new()
Marek Lindner [Sat, 25 Jul 2015 20:57:43 +0000 (04:57 +0800)]
batman-adv: move neigh_node list add into batadv_neigh_node_new()

All batadv_neigh_node_* functions expect the neigh_node list item to be part
of the orig_node->neigh_list, therefore the constructor of said list item
should be adding the newly created neigh_node to the respective list.

Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Acked-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
9 years agobatman-adv: remove redundant hard_iface assignment
Marek Lindner [Sat, 25 Jul 2015 20:37:47 +0000 (04:37 +0800)]
batman-adv: remove redundant hard_iface assignment

The batadv_neigh_node_new() function already sets the hard_iface pointer.

Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Acked-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
9 years agobatman-adv: move hardif refcount inc to batadv_neigh_node_new()
Marek Lindner [Sat, 25 Jul 2015 20:37:15 +0000 (04:37 +0800)]
batman-adv: move hardif refcount inc to batadv_neigh_node_new()

The batadv_neigh_node cleanup function 'batadv_neigh_node_free_rcu()'
takes care of reducing the hardif refcounter, hence it's only logical
to assume the creating function of that same object
'batadv_neigh_node_new()' takes care of increasing the same refcounter.

Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Acked-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
9 years agoMerge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Linus Torvalds [Thu, 27 Aug 2015 18:12:41 +0000 (11:12 -0700)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull amr64 kvm fix from Will Deacon:
 "We've uncovered a nasty bug in the arm64 KVM code which allows a badly
  behaved 32-bit guest to bring down the host.  The fix is simple (it's
  what I believe we call a "brown paper bag" bug) and I don't think it
  makes sense to sit on this, particularly as Russell ended up
  triggering this rather than just somebody noticing a potential problem
  by inspection.

  Usually arm64 KVM changes would go via Paolo's tree, but he's on
  holiday at the moment and the deal is that anything urgent gets
  shuffled via the arch trees, so here it is.

  Summary:

  Fix arm64 KVM issue when injecting an abort into a 32-bit guest, which
  would lead to an illegal exception return at EL2 and a subsequent host
  crash"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: KVM: Fix host crash when injecting a fault into a 32bit guest

9 years agoarm64: KVM: Fix host crash when injecting a fault into a 32bit guest
Marc Zyngier [Thu, 27 Aug 2015 15:10:01 +0000 (16:10 +0100)]
arm64: KVM: Fix host crash when injecting a fault into a 32bit guest

When injecting a fault into a misbehaving 32bit guest, it seems
rather idiotic to also inject a 64bit fault that is only going
to corrupt the guest state. This leads to a situation where we
perform an illegal exception return at EL2 causing the host
to crash instead of killing the guest.

Just fix the stupid bug that has been there from day 1.

Cc: <stable@vger.kernel.org>
Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
9 years agobpf: fix bpf_skb_set_tunnel_key() helper
Alexei Starovoitov [Wed, 26 Aug 2015 22:57:38 +0000 (15:57 -0700)]
bpf: fix bpf_skb_set_tunnel_key() helper

Make sure to indicate to tunnel driver that key.tun_id is set,
otherwise gre won't recognize the metadata.

Fixes: d3aa45ce6b94 ("bpf: add helpers to access tunnel metadata")
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoi40e/i40evf: Bump i40e to 1.3.9 and i40evf to 1.3.5
Catherine Sullivan [Fri, 10 Jul 2015 23:36:10 +0000 (19:36 -0400)]
i40e/i40evf: Bump i40e to 1.3.9 and i40evf to 1.3.5

Bump version and update the copyright year for i40evf.

Change-ID: Iddb81b9dba09f0dc57ab54937b5821ecdd721ff6
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
9 years agoi40e/i40evf: Cache the CEE TLV status returned from firmware
Neerav Parikh [Fri, 10 Jul 2015 23:36:09 +0000 (19:36 -0400)]
i40e/i40evf: Cache the CEE TLV status returned from firmware

Store the CEE TLV status returned by firmware to allow drivers to dump that
for debug purposes.

Change-ID: Ie3c4cf8cebabee4f15e1e3fdc4fc8a68bbca40ee
Signed-off-by: Neerav Parikh <neerav.parikh@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
9 years agoi40e/i40evf: add VIRTCHNL_VF_OFFLOAD flag
Anjali Singhai Jain [Fri, 10 Jul 2015 23:36:08 +0000 (19:36 -0400)]
i40e/i40evf: add VIRTCHNL_VF_OFFLOAD flag

Add virtual channel offload capability to support RX polling mode in the
VF.

Change-ID: Ib643ae2a7506dfc75fc489fc207493fabefa4832
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
9 years agoi40e: Remove redundant and unneeded messages
Greg Rose [Fri, 10 Jul 2015 23:36:07 +0000 (19:36 -0400)]
i40e: Remove redundant and unneeded messages

The kernel notifies all VXLAN capable registered drivers, i.e. any
driver that implements ndo_add_vxlan_port(), of the addition of a
port so that the driver can track which ports are in use.  There's
no need to log this - it just fills the system log with useless and
irksome noise.

Also, when failing to init SR-IOV interfaces the driver was printing the
same message twice. Just remove the inner printk and let the outer message
catch enable as well as the other failures.

Change-ID: Id5ecb1d425c2a357ee2bc1635dab24553831dade
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
9 years agoi40evf: Remove PF specific register definitions from the VF
Anjali Singhai Jain [Fri, 10 Jul 2015 23:36:06 +0000 (19:36 -0400)]
i40evf: Remove PF specific register definitions from the VF

There were quite a few issues when the wrong defines were getting used
in the VF driver. This patch fixes the code where PF driver registers
were getting used for VF driver, and also removes the registers that are
not being used from the VF register file.

Change-ID: If116a9730112950d006eb8ec763998fc914cc839
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Acked-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
9 years agoi40evf: Use the correct defines to match the VF registers
Anjali Singhai Jain [Fri, 10 Jul 2015 23:36:05 +0000 (19:36 -0400)]
i40evf: Use the correct defines to match the VF registers

Use CTLN1 instead of CTLN for the VF relative register space.

Change-ID: Iefba63faf0307af55fec8dbb64f26059f7d91318
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
9 years agoi40e: correct spelling error
Mitch Williams [Fri, 10 Jul 2015 23:36:04 +0000 (19:36 -0400)]
i40e: correct spelling error

Turns out that 'inavlid' is an inavlid spelling for 'invalid'.

Change-ID: Ie1fe2d0f8d1ba75ab880594875ec2e4152a76f61
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
9 years agoi40e: Fix comment for ethtool diagnostic link test
Greg Rose [Fri, 10 Jul 2015 23:36:03 +0000 (19:36 -0400)]
i40e: Fix comment for ethtool diagnostic link test

The existing comment is incorrect.  Add new comment to point out that the
PF reset does not affect link but if the reset is changed to a different
type that does affect link then the link test would need to be moved to
before the reset.

Change-ID: I28d786f46e9465860babdee61c1dba51016464df
Reported-by: Jeremiah Kyle <jeremiah.kyle@intel.com>
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
9 years agoi40e/i40evf: Add capability to gather VEB per TC stats
Neerav Parikh [Fri, 10 Jul 2015 23:36:02 +0000 (19:36 -0400)]
i40e/i40evf: Add capability to gather VEB per TC stats

This patch adds capability to update per VEB per TC statistics and dump
it via ethtool. It also adds a structure to hold VEB per TC statistics.
The fields can be filled by reading the GLVEBTC_* counters.

Change-ID: I28b4759b9ab6ad5a61f046a1bc9ef6b16fe31538
Signed-off-by: Neerav Parikh <neerav.parikh@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>