GitHub/LineageOS/android_kernel_motorola_exynos9610.git
14 years agoMerge branch 'x86-bootmem-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Wed, 3 Mar 2010 16:15:05 +0000 (08:15 -0800)]
Merge branch 'x86-bootmem-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-bootmem-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (30 commits)
  early_res: Need to save the allocation name in drop_range_partial()
  sparsemem: Fix compilation on PowerPC
  early_res: Add free_early_partial()
  x86: Fix non-bootmem compilation on PowerPC
  core: Move early_res from arch/x86 to kernel/
  x86: Add find_fw_memmap_area
  Move round_up/down to kernel.h
  x86: Make 32bit support NO_BOOTMEM
  early_res: Enhance check_and_double_early_res
  x86: Move back find_e820_area to e820.c
  x86: Add find_early_area_size
  x86: Separate early_res related code from e820.c
  x86: Move bios page reserve early to head32/64.c
  sparsemem: Put mem map for one node together.
  sparsemem: Put usemap for one node together
  x86: Make 64 bit use early_res instead of bootmem before slab
  x86: Only call dma32_reserve_bootmem 64bit !CONFIG_NUMA
  x86: Make early_node_mem get mem > 4 GB if possible
  x86: Dynamically increase early_res array size
  x86: Introduce max_early_res and early_res_count
  ...

14 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394...
Linus Torvalds [Wed, 3 Mar 2010 16:08:44 +0000 (08:08 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/ieee1394/linux1394-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: (23 commits)
  firewire: ohci: extend initialization log message
  firewire: ohci: fix IR/IT context mask mixup
  firewire: ohci: add module parameter to activate quirk fixes
  firewire: ohci: use an ID table for quirks detection
  firewire: ohci: reorder struct fw_ohci for better cache efficiency
  firewire: ohci: remove unused dualbuffer IR code
  firewire: core: combine a bit of repeated code
  firewire: core: change type of a data buffer
  firewire: cdev: increment ABI version number
  firewire: cdev: add more flexible cycle timer ioctl
  firewire: core: rename an internal function
  firewire: core: fix an information leak
  firewire: core: increase stack size of config ROM reader
  firewire: core: don't fail device creation in case of too large config ROM blocks
  firewire: core: fix "giving up on config rom" with Panasonic AG-DV2500
  firewire: remove incomplete Bus_Time CSR support
  firewire: get_cycle_timer optimization and cleanup
  firewire: ohci: enable cycle timer fix on ALi and NEC controllers
  firewire: ohci: work around cycle timer bugs on VIA controllers
  firewire: make PCI device id constant
  ...

14 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi...
Linus Torvalds [Wed, 3 Mar 2010 16:08:21 +0000 (08:08 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mszeredi/fuse

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: fix large stack use
  fuse: cleanup in fuse_notify_inval_...()

14 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platf...
Linus Torvalds [Wed, 3 Mar 2010 15:41:24 +0000 (07:41 -0800)]
Merge branch 'for_linus' of git://git./linux/kernel/git/mjg59/platform-drivers-x86

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: (45 commits)
  compal-laptop: Make it depend on CONFIG_RFKILL
  classmate-laptop: Added some keys present in other devices
  MAINTAINERS: Add git tree to x86 Platform Drivers
  asus-acpi: remove duplicate comparison of asus_model strings
  toshiba-acpi: fix multimedia keys on some machines
  dell-laptop: Fix errors on failure and exit paths
  dell-laptop: Fix build error by making buffer_mutex static
  asus-laptop: fix style problems reported by checkpath.pl
  asus-laptop: use device_create_file() instead of platform_group
  asus-laptop: clean led code
  asus-laptop: add gps rfkill
  asus-laptop: set initial lcd state
  asus-laptop: leds, remove dead code and fix asus_led_exit()/asus_led_init()
  asus-laptop: add backlight changes notifications
  asus-laptop: add bluetooth keys found on M9V
  asus-laptop: switch to sparse keymap library
  asus-laptop: rename wireless_status to wlan_status to avoid confusion
  asus-laptop: add error check for write_acpi_int calls
  asus-laptop: stop using ASUS_HANDLE and use relative methods instead
  asus-laptop: rename function talking directly to acpi with asus_xxx scheme
  ...

14 years agoMerge branch 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvar...
Linus Torvalds [Wed, 3 Mar 2010 15:34:47 +0000 (07:34 -0800)]
Merge branch 'i2c-for-linus' of git://git./linux/kernel/git/jdelvare/staging

* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  i2c: Document the message size limit
  i2c-algo-pca: Drop duplicate variable
  i2c: Hook up runtime PM support
  i2c-parport-light: Add SMBus alert support
  i2c-parport: Add SMBus alert support
  i2c: Separate Kconfig option for i2c-smbus
  i2c: Add SMBus alert support
  i2c-parport: Give powered devices some time to settle
  i2c-tiny-usb: Fix a comment on bus frequency
  i2c-i801: Add Intel Cougar Point device IDs
  i2c: Make PCI device ids constant

14 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
Linus Torvalds [Wed, 3 Mar 2010 15:34:18 +0000 (07:34 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/tj/percpu

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: add __percpu sparse annotations to what's left
  percpu: add __percpu sparse annotations to fs
  percpu: add __percpu sparse annotations to core kernel subsystems
  local_t: Remove leftover local.h
  this_cpu: Remove pageset_notifier
  this_cpu: Page allocator conversion
  percpu, x86: Generic inc / dec percpu instructions
  local_t: Move local.h include to ringbuffer.c and ring_buffer_benchmark.c
  module: Use this_cpu_xx to dynamically allocate counters
  local_t: Remove cpu_local_xx macros
  percpu: refactor the code in pcpu_[de]populate_chunk()
  percpu: remove compile warnings caused by __verify_pcpu_ptr()
  percpu: make accessors check for percpu pointer in sparse
  percpu: add __percpu for sparse.
  percpu: make access macros universal
  percpu: remove per_cpu__ prefix.

14 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw
Linus Torvalds [Wed, 3 Mar 2010 15:33:50 +0000 (07:33 -0800)]
Merge git://git./linux/kernel/git/steve/gfs2-2.6-nmw

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw:
  GFS2: print glock numbers in hex
  GFS2: ordered writes are backwards
  GFS2: Remove old, unused linked list code from quota
  GFS2: Remove loopy umount code
  GFS2: Metadata address space clean up

14 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland...
Linus Torvalds [Wed, 3 Mar 2010 15:33:17 +0000 (07:33 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/roland/infiniband

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (48 commits)
  IB/srp: Clean up error path in srp_create_target_ib()
  IB/srp: Split send and recieve CQs to reduce number of interrupts
  RDMA/nes: Add support for KR device id 0x0110
  IB/uverbs: Use anon_inodes instead of private infinibandeventfs
  IB/core: Fix and clean up ib_ud_header_init()
  RDMA/cxgb3: Mark RDMA device with CXIO_ERROR_FATAL when removing
  RDMA/cxgb3: Don't allocate the SW queue for user mode CQs
  RDMA/cxgb3: Increase the max CQ depth
  RDMA/cxgb3: Doorbell overflow avoidance and recovery
  IB/core: Pack struct ib_device a little tighter
  IB/ucm: Clean whitespace errors
  IB/ucm: Increase maximum devices supported
  IB/ucm: Use stack variable 'base' in ib_ucm_add_one
  IB/ucm: Use stack variable 'devnum' in ib_ucm_add_one
  IB/umad: Clean whitespace
  IB/umad: Increase maximum devices supported
  IB/umad: Use stack variable 'base' in ib_umad_init_port
  IB/umad: Use stack variable 'devnum' in ib_umad_init_port
  IB/umad: Remove port_table[]
  IB/umad: Convert *cdev to cdev in struct ib_umad_port
  ...

14 years agodocbook: fix errors from x86 headers merger
Randy Dunlap [Tue, 2 Mar 2010 06:06:25 +0000 (22:06 -0800)]
docbook: fix errors from x86 headers merger

Fix docbook errors for x86 headers that were recently merged:

docproc: arch/x86/include/asm/atomic_32.h: No such file or directory
docproc: arch/x86/include/asm/io_32.h: No such file or directory

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6
Linus Torvalds [Wed, 3 Mar 2010 15:32:10 +0000 (07:32 -0800)]
Merge git://git./linux/kernel/git/sfrench/cifs-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] pSesInfo->sesSem is used as mutex. Rename it to session_mutex and
  [CIFS] Use unsigned ea length for clarity
  cifs: set server_eof in cifs_fattr_to_inode
  [CIFS] Minor cleanup to EA patch
  cifs: merge CIFSSMBQueryEA with CIFSSMBQAllEAs
  cifs: verify lengths of QueryAllEAs reply
  cifs: increase maximum buffer size in CIFSSMBQAllEAs
  cifs: rename name_len to list_len in CIFSSMBQAllEAs
  cifs: clean up indentation in CIFSSMBQAllEAs
  cifs: add parens around smb_var in BCC macros

14 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris...
Linus Torvalds [Tue, 2 Mar 2010 22:47:24 +0000 (14:47 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (38 commits)
  SELinux: Make selinux_kernel_create_files_as() shouldn't just always return 0
  TOMOYO: Protect find_task_by_vpid() with RCU.
  Security: add static to security_ops and default_security_ops variable
  selinux: libsepol: remove dead code in check_avtab_hierarchy_callback()
  TOMOYO: Remove __func__ from tomoyo_is_correct_path/domain
  security: fix a couple of sparse warnings
  TOMOYO: Remove unneeded parameter.
  TOMOYO: Use shorter names.
  TOMOYO: Use enum for index numbers.
  TOMOYO: Add garbage collector.
  TOMOYO: Add refcounter on domain structure.
  TOMOYO: Merge headers.
  TOMOYO: Add refcounter on string data.
  TOMOYO: Reduce lines by using common path for addition and deletion.
  selinux: fix memory leak in sel_make_bools
  TOMOYO: Extract bitfield
  syslog: clean up needless comment
  syslog: use defined constants instead of raw numbers
  syslog: distinguish between /proc/kmsg and syscalls
  selinux: allow MLS->non-MLS and vice versa upon policy reload
  ...

14 years agoMerge branch 'for-linus' of git://gitorious.org/linux-omap-dss2/linux
Linus Torvalds [Tue, 2 Mar 2010 18:41:26 +0000 (10:41 -0800)]
Merge branch 'for-linus' of git://gitorious.org/linux-omap-dss2/linux

* 'for-linus' of git://gitorious.org/linux-omap-dss2/linux: (49 commits)
  OMAP: DSS2: Taal: Fix TE when resuming
  OMAP: DSS2: Taal: Fix ESD check
  OMAP: DSS2: OMAPFB: Constify some function parameters
  OMAP: DSS2: OMAPFB: install omapfb.h
  OMAP: DSS2: DSI: add error prints
  OMAP: DSS2: TPO-TD03MTEA1: fix function names
  OMAP: DSS2: DSI: add dsi_vc_dcs_read_2() helper
  OMAP: DSS2: OMAPFB: Remove FB_OMAP2_FORCE_AUTO_UPDATE
  OMAP: DSS2: DSI: remove external TE support
  OMAP: DSS2: move timing functions
  OMAP: DSS2: move set/get_wss()
  OMAP: DSS2: move enable/disable/suspend/resume
  OMAP: DSS2: move update() and sync()
  OMAP: DSS2: move set/get_update_mode()
  OMAP: DSS2: move enable/get_te()
  OMAP: DSS2: move get_recommended_bpp()
  OMAP: DSS2: move get_resolution()
  OMAP: DSS2: move enable/disable_channel to overlay manager
  OMAP: DSS2: move wait_vsync()
  OMAP: DSS2: move get/set_rotate()
  ...

14 years agoMerge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind...
Linus Torvalds [Tue, 2 Mar 2010 18:34:25 +0000 (10:34 -0800)]
Merge branch 'omap-for-linus' of git://git./linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (214 commits)
  omap2: Initialize Menelaus and MMC for N8X0
  AM3517 EVM: correct typo - tca6416 mispelt as tca6516
  AM3517 EVM: Enable I2C support
  AM35x: Enable OMAP_MUX in defconfig
  AM35x: Add missing GPIO mux config for EHCI port
  Zoom3: Defconfig update
  omap: i2c: Fix muxing for command line enabled bus
  OMAP4: clock: Remove clock hacks from timer-gp.c
  OMAP4: clock: Add dummy clock nodes for interface clocks
  OMAP4: clock: Rename leaf clock nodes to end with a _ick or _fck
  OMAP2+ clock: revise omap2_clk_{disable,enable}()
  OMAP2/3 clock: combine OMAP2 & 3 boot-time MPU rate change code
  OMAP clockdomain: if no autodeps exist, don't try to add or remove them
  OMAP hwmod: add hwmod class support
  OMAP hwmod: convert header files with static allocations into C files
  OMAP hwmod: convert hwmod to use hardware clock names rather than clkdev dev+con
  OMAP clock: add omap_clk_get_by_name() for use by OMAP hwmod core code
  OMAP3: clock: add capability to change rate of dpll4_m5_ck_3630
  OMAP4 clock: drop the ALWAYS_ENABLED clock flag
  OMAP clock: drop RATE_FIXED clock flag
  ...

14 years agoMerge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
Linus Torvalds [Tue, 2 Mar 2010 18:33:36 +0000 (10:33 -0800)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  Revert "blkdev: fix merge_bvec_fn return value checks"

14 years agoRevert "blkdev: fix merge_bvec_fn return value checks"
Jens Axboe [Tue, 2 Mar 2010 18:17:34 +0000 (19:17 +0100)]
Revert "blkdev: fix merge_bvec_fn return value checks"

This reverts commit 9f7cdbc33f36d28e57eaba0093f68f0d14c38c5b.

It's causing oopses om dm setups, so revert it until we investigate.

Reported-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
14 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6
Linus Torvalds [Tue, 2 Mar 2010 15:56:44 +0000 (07:56 -0800)]
Merge git://git./linux/kernel/git/davem/sparc-next-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6:
  sparc: Support show_unhandled_signals.
  sparc: use __ratelimit
  sunxvr500: Additional PCI id for sunxvr500 driver
  sparc: use asm-generic/scatterlist.h
  sparc64: If 'slot-names' property exist, create sysfs PCI slot information.
  sparc: remove trailing space in messages
  sparc: remove redundant return statements

14 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
Linus Torvalds [Tue, 2 Mar 2010 15:55:08 +0000 (07:55 -0800)]
Merge git://git./linux/kernel/git/davem/net-next-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1341 commits)
  virtio_net: remove forgotten assignment
  be2net: fix tx completion polling
  sis190: fix cable detect via link status poll
  net: fix protocol sk_buff field
  bridge: Fix build error when IGMP_SNOOPING is not enabled
  bnx2x: Tx barriers and locks
  scm: Only support SCM_RIGHTS on unix domain sockets.
  vhost-net: restart tx poll on sk_sndbuf full
  vhost: fix get_user_pages_fast error handling
  vhost: initialize log eventfd context pointer
  vhost: logging thinko fix
  wireless: convert to use netdev_for_each_mc_addr
  ethtool: do not set some flags, if others failed
  ipoib: returned back addrlen check for mc addresses
  netlink: Adding inode field to /proc/net/netlink
  axnet_cs: add new id
  bridge: Make IGMP snooping depend upon BRIDGE.
  bridge: Add multicast count/interval sysfs entries
  bridge: Add hash elasticity/max sysfs entries
  bridge: Add multicast_snooping sysfs toggle
  ...

Trivial conflicts in Documentation/feature-removal-schedule.txt

14 years agoOMAP: DSS2: Taal: Fix TE when resuming
Tomi Valkeinen [Tue, 2 Mar 2010 10:13:55 +0000 (12:13 +0200)]
OMAP: DSS2: Taal: Fix TE when resuming

TE was not initialized properly on power on, which broke TE when resuming
from suspend.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
14 years agocompal-laptop: Make it depend on CONFIG_RFKILL
Ingo Molnar [Tue, 2 Mar 2010 14:53:45 +0000 (09:53 -0500)]
compal-laptop: Make it depend on CONFIG_RFKILL

-tip testing found this build failure (x86 randconfig):

 drivers/built-in.o: In function `setup_rfkill':
 compal-laptop.c:(.text+0x36abe8): undefined reference to `rfkill_alloc'
 compal-laptop.c:(.text+0x36abfc): undefined reference to `rfkill_register'
 compal-laptop.c:(.text+0x36ac30): undefined reference to `rfkill_alloc'
 compal-laptop.c:(.text+0x36ac44): undefined reference to `rfkill_register'

Which can happen with CONFIG_COMPAL_LAPTOP=y but COMPAL_LAPTOP=m.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
14 years agoMerge branch 'for-upstream/platform-x86_tpacpi' of git://repo.or.cz/linux-2.6/linux...
Matthew Garrett [Tue, 2 Mar 2010 14:51:48 +0000 (09:51 -0500)]
Merge branch 'for-upstream/platform-x86_tpacpi' of git://repo.or.cz/linux-2.6/linux-acpi-2.6/ibm-acpi-2.6 into x86-platform

14 years agovirtio_net: remove forgotten assignment
Jiri Pirko [Tue, 2 Mar 2010 11:57:33 +0000 (03:57 -0800)]
virtio_net: remove forgotten assignment

This is no longer needed. I missed to remove this in
567ec874d15b478c8eda7e9a5d2dcb05f13f1fb5 ("net: convert multiple
drivers to use netdev_for_each_mc_addr, part6")

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agobe2net: fix tx completion polling
Sathya Perla [Tue, 2 Mar 2010 11:56:39 +0000 (03:56 -0800)]
be2net: fix tx completion polling

In tx/mcc polling, napi_complete() is being incorrectly called
before reaping tx completions. This can cause tx compl processing
to be scheduled on another cpu concurrently which can result in a panic.
This if fixed by calling napi complete() after tx/mcc compl processing
but before re-enabling interrupts (via a cq notify).

Signed-off-by: Sathya Perla <sathyap@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agosis190: fix cable detect via link status poll
Herton Ronaldo Krzesinski [Tue, 2 Mar 2010 11:44:41 +0000 (03:44 -0800)]
sis190: fix cable detect via link status poll

Some sis190 devices don't report LinkChange, so do polling for
link status.

Fixes http://bugzilla.kernel.org/show_bug.cgi?id=11926

Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoi2c: Document the message size limit
Zhangfei Gao [Tue, 2 Mar 2010 11:23:49 +0000 (12:23 +0100)]
i2c: Document the message size limit

i2c_master_send & i2c_master_recv do not support more than 64 kb
transfer, since msg.len is u16.

Signed-off-by: Zhangfei Gao <zgao6@marvell.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
14 years agoi2c-algo-pca: Drop duplicate variable
Jean Delvare [Tue, 2 Mar 2010 11:23:47 +0000 (12:23 +0100)]
i2c-algo-pca: Drop duplicate variable

Thanks to -Wshadow.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
14 years agoi2c: Hook up runtime PM support
Mark Brown [Tue, 2 Mar 2010 11:23:46 +0000 (12:23 +0100)]
i2c: Hook up runtime PM support

Allow I2C drivers to make use of the runtime PM framework by adding
bus implementations of the runtime PM operations. These simply
immediately suspend when the device is idle. The runtime PM framework
provides drivers with off the shelf refcounts for enables and sysfs
control for managing runtime suspend from userspace so is useful even
without meaningful input from the bus.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
14 years agoi2c-parport-light: Add SMBus alert support
Jean Delvare [Tue, 2 Mar 2010 11:23:45 +0000 (12:23 +0100)]
i2c-parport-light: Add SMBus alert support

Add support for the SMBus alert mechanism to the i2c-parport-light
driver. The ADM1032 evaluation board at least is properly wired for
this.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Trent Piepho <tpiepho@freescale.com>
14 years agoi2c-parport: Add SMBus alert support
Jean Delvare [Tue, 2 Mar 2010 11:23:44 +0000 (12:23 +0100)]
i2c-parport: Add SMBus alert support

Add support for the SMBus alert mechanism to the i2c-parport driver.
The ADM1032 evaluation board at least is properly wired for this.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Trent Piepho <tpiepho@freescale.com>
14 years agoi2c: Separate Kconfig option for i2c-smbus
Jean Delvare [Tue, 2 Mar 2010 11:23:43 +0000 (12:23 +0100)]
i2c: Separate Kconfig option for i2c-smbus

Having a separate Kconfig option for i2c-smbus makes it possible to
build that support as a module even when i2c-core itself is built-in.
Bus drivers which implement SMBus alert should select this option, so
in most cases this option is hidden and the user doesn't have to care
about it.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Trent Piepho <tpiepho@freescale.com>
14 years agoi2c: Add SMBus alert support
Jean Delvare [Tue, 2 Mar 2010 11:23:42 +0000 (12:23 +0100)]
i2c: Add SMBus alert support

SMBus alert support. The SMBus alert protocol allows several SMBus
slave devices to share a single interrupt pin on the SMBus master,
while still allowing the master to know which slave triggered the
interrupt.

This is based on preliminary work by David Brownell. The key
difference between David's implementation and mine is that his was
part of i2c-core, while mine is split into a separate, standalone
module named i2c-smbus. The i2c-smbus module is meant to include
support for all SMBus extensions to the I2C protocol in the future.

The benefit of this approach is a zero cost for I2C bus segments which
do not need SMBus alert support. Where David's implementation
increased the size of struct i2c_adapter by 7% (40 bytes on i386),
mine doesn't touch it. Where David's implementation added over 150
lines of code to i2c-core (+10%), mine doesn't touch it. The only
change that touches all the users of the i2c subsystem is a new
callback in struct i2c_driver (common to both implementations.) I seem
to remember Trent was worried about the footprint of David'd
implementation, hopefully mine addresses the issue.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Trent Piepho <tpiepho@freescale.com>
14 years agoi2c-parport: Give powered devices some time to settle
Jean Delvare [Tue, 2 Mar 2010 11:23:41 +0000 (12:23 +0100)]
i2c-parport: Give powered devices some time to settle

When the i2c-parport adapter is reponsible for powering devices, it
would seem reasonable to give them some time to settle before trying
to access them.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
14 years agoi2c-tiny-usb: Fix a comment on bus frequency
Jean Delvare [Tue, 2 Mar 2010 11:23:40 +0000 (12:23 +0100)]
i2c-tiny-usb: Fix a comment on bus frequency

The description of the delay parameter is incomplete, it suggests that
there is a direct relation between the delay value and the bus
frequency. In fact, due to additional delays in the i2c bitbanging
code, the i2c clock is always much slower.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Till Harbaum <Till@Harbaum.org>
14 years agoi2c-i801: Add Intel Cougar Point device IDs
Seth Heasley [Tue, 2 Mar 2010 11:23:39 +0000 (12:23 +0100)]
i2c-i801: Add Intel Cougar Point device IDs

Add the Intel Cougar Point (PCH) SMBus controller device IDs.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
14 years agoi2c: Make PCI device ids constant
Márton Németh [Tue, 2 Mar 2010 11:23:37 +0000 (12:23 +0100)]
i2c: Make PCI device ids constant

The id_table field of the struct pci_driver is constant in <linux/pci.h>
so it is worth to make initialization data also constant.

The semantic match that finds this kind of pattern is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r@
disable decl_init,const_decl_init;
identifier I1, I2, x;
@@
struct I1 {
  ...
  const struct I2 *x;
  ...
};
@s@
identifier r.I1, y;
identifier r.x, E;
@@
struct I1 y = {
  .x = E,
};
@c@
identifier r.I2;
identifier s.E;
@@
const struct I2 E[] = ... ;
@depends on !c@
identifier r.I2;
identifier s.E;
@@
+ const
struct I2 E[] = ...;
// </smpl>

Signed-off-by: Márton Németh <nm127@freemail.hu>
Cc: Julia Lawall <julia@diku.dk>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
14 years agonet: fix protocol sk_buff field
Eric Dumazet [Mon, 1 Mar 2010 03:09:26 +0000 (03:09 +0000)]
net: fix protocol sk_buff field

Commit e992cd9b72a18 (kmemcheck: make bitfield annotations truly no-ops
when disabled) allows us to revert a workaround we did in the past to
not add holes in sk_buff structure.

This patch partially reverts commit 14d18a81b5171
(net: fix kmemcheck annotations) so that sparse doesnt complain:

include/linux/skbuff.h:357:41: error: invalid bitfield specifier for
type restricted __be16.

Reported-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agobridge: Fix build error when IGMP_SNOOPING is not enabled
Sridhar Samudrala [Mon, 1 Mar 2010 09:53:04 +0000 (09:53 +0000)]
bridge: Fix build error when IGMP_SNOOPING is not enabled

Fix the following build error when IGMP_SNOOPING is not enabled.
In file included from net/bridge/br.c:24:
net/bridge/br_private.h: In function 'br_multicast_is_router':
net/bridge/br_private.h:361: error: 'struct net_bridge' has no member named 'multicast_router'
net/bridge/br_private.h:362: error: 'struct net_bridge' has no member named 'multicast_router'
net/bridge/br_private.h:363: error: 'struct net_bridge' has no member named 'multicast_router_timer'

Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoMerge branch 'misc' into for-next
Roland Dreier [Tue, 2 Mar 2010 07:52:31 +0000 (23:52 -0800)]
Merge branch 'misc' into for-next

Conflicts:
drivers/infiniband/core/uverbs_main.c

14 years agoMerge branch 'srp' into for-next
Roland Dreier [Tue, 2 Mar 2010 07:51:57 +0000 (23:51 -0800)]
Merge branch 'srp' into for-next

14 years agoMerge branch 'nes' into for-next
Roland Dreier [Tue, 2 Mar 2010 07:51:57 +0000 (23:51 -0800)]
Merge branch 'nes' into for-next

14 years agoMerge branch 'mlx4' into for-next
Roland Dreier [Tue, 2 Mar 2010 07:51:56 +0000 (23:51 -0800)]
Merge branch 'mlx4' into for-next

14 years agoMerge branch 'iser' into for-next
Roland Dreier [Tue, 2 Mar 2010 07:51:56 +0000 (23:51 -0800)]
Merge branch 'iser' into for-next

14 years agoMerge branch 'ipoib' into for-next
Roland Dreier [Tue, 2 Mar 2010 07:51:56 +0000 (23:51 -0800)]
Merge branch 'ipoib' into for-next

14 years agoMerge branch 'ehca' into for-next
Roland Dreier [Tue, 2 Mar 2010 07:51:55 +0000 (23:51 -0800)]
Merge branch 'ehca' into for-next

14 years agoMerge branch 'cxgb3' into for-next
Roland Dreier [Tue, 2 Mar 2010 07:51:55 +0000 (23:51 -0800)]
Merge branch 'cxgb3' into for-next

14 years agoMerge branch 'cma' into for-next
Roland Dreier [Tue, 2 Mar 2010 07:51:54 +0000 (23:51 -0800)]
Merge branch 'cma' into for-next

14 years agoIB/srp: Clean up error path in srp_create_target_ib()
Roland Dreier [Wed, 24 Feb 2010 23:07:59 +0000 (15:07 -0800)]
IB/srp: Clean up error path in srp_create_target_ib()

Instead of repeating the error unwinding steps in each place an error
can be detected, use the common idiom of gotos into an error flow.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
14 years agoIB/srp: Split send and recieve CQs to reduce number of interrupts
Bart Van Assche [Tue, 2 Feb 2010 19:23:54 +0000 (19:23 +0000)]
IB/srp: Split send and recieve CQs to reduce number of interrupts

We can reduce the number of IB interrupts from two interrupts per
srp_queuecommand() call to one by using separate CQs for send and
receive completions and processing send completions by polling every
time a TX IU is allocated.

Receive completion events still trigger an interrupt.

Signed-off-by: Bart Van Assche <bart.vanassche@gmail.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
14 years agoearly_res: Need to save the allocation name in drop_range_partial()
Yinghai Lu [Tue, 2 Mar 2010 02:48:52 +0000 (18:48 -0800)]
early_res: Need to save the allocation name in drop_range_partial()

During free_early_partial(), reserve_early_without_check() could end
extending the early_res area from __check_and_double_early_res(); as a
result, the location of the name for the current reservation could
change.

Therefore, we need to save a local copy of the name.

[ hpa: rewrote comment and checkin description ]

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4B8C7C94.7070000@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
14 years agosparsemem: Fix compilation on PowerPC
Yinghai Lu [Sat, 27 Feb 2010 17:29:38 +0000 (09:29 -0800)]
sparsemem: Fix compilation on PowerPC

Stephen reported:
build (powerpc
ppc64_defconfig) produced these warnings:

mm/sparse.c: In function 'sparse_init':
mm/sparse.c:488: warning: unused variable 'map_count'
mm/sparse.c:484: warning: unused variable 'size2'
mm/sparse.c:481: warning: unused variable 'map_map'
mm/sparse.c: At top level:
mm/sparse.c:442: warning: 'sparse_early_mem_maps_alloc_node' defined but not used

Introduced by commit 9bdac914240759457175ac0d6529a37d2820bc4d
("sparsemem: Put mem map for one node together").

Conditionalize the bits appropriately based on the setting of
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4B895682.1080706@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
14 years agoMerge with mainline to remove plat-omap/Kconfig conflict
Tony Lindgren [Mon, 1 Mar 2010 22:19:05 +0000 (14:19 -0800)]
Merge ... mainline to remove plat-omap/Kconfig conflict

Conflicts:
arch/arm/plat-omap/Kconfig

14 years agoclassmate-laptop: Added some keys present in other devices
Thadeu Lima de Souza Cascardo [Mon, 1 Mar 2010 21:15:58 +0000 (16:15 -0500)]
classmate-laptop: Added some keys present in other devices

Some new devices have extra keys, which we add to our list. Currently,
they all generate events that allow us to use a simple table/array,
without need for the sparse keymap.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
14 years agoMerge branch 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Mon, 1 Mar 2010 21:05:40 +0000 (13:05 -0800)]
Merge branch 'davinci-for-linus' of git://git./linux/kernel/git/khilman/linux-davinci

* 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci: (40 commits)
  DaVinci DM365: Adding support for SPI EEPROM
  DaVinci DM365: Adding DM365 SPI support
  DaVinci DM355: Modifications to DM355 SPI support
  DaVinci: SPI: Adding header file for SPI support.
  davinci: dm646x: CDCE clocks: davinci_clk converted to clk_lookup
  davinci: clkdev cleanup: remove clk_lookup wrapper, use clkdev_add_table()
  DaVinci: DM365: Voice codec support for the DM365 SoC
  davinci: clock: let clk->set_rate function sleep
  Add SDA and SCL pin numbers to i2c platform data
  davinci: da8xx/omap-l1xx: Add EDMA platform data for da850/omap-l138
  davinci: build list of unused EDMA events dynamically
  davinci: Fix edma_alloc_channel api for EDMA_CHANNEL_ANY case
  davinci: Keep count of channel controllers on a platform
  davinci: Correct return value of edma_alloc_channel api
  davinci: add CDCE949 support on DM6467 EVM
  davinci: add support for CDCE949 clock synthesizer
  davinci: da850/omap-l138 EVM: register for suspend support
  davinci: da850/omap-l138: add support for SoC suspend
  davinci: add power management support
  DaVinci: DM365: Changing default queue for DM365.
  ...

14 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzi...
Linus Torvalds [Mon, 1 Mar 2010 21:04:58 +0000 (13:04 -0800)]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (38 commits)
  sata_via: Delay on vt6420 when starting ATAPI DMA write
  ata: Detect Delkin Devices compact flash
  pata_efar: Enable parallel scanning
  pata_atiixp: enable parallel scan
  [libata] pata_atiixp: add locking for parallel scanning
  [libata] pata_efar: add locking for parallel scanning
  libata: Pass host flags into the pci helper
  [libata] pata_marvell: CONFIG_AHCI is really CONFIG_SATA_AHCI
  libata: Allow pata_legacy to be built on non-ISA but PCI systems
  pata_pdc202xx_old: fix UDMA mode for PDC2026x chipsets
  pata_pdc202xx_old: fix UDMA mode for Promise UDMA33 cards
  [libata] pata_at91: fix backslash-continued string
  pata_via: store UDMA masks in via_isa_bridges table
  pata_via: fix address setup timings underlocking
  pata_serverworks: fix error message
  pata_serverworks: fix PIO setup for the second channel
  pata_efar: fix secondary port support
  pata_cypress: fix PIO timings underclocking
  pata_cs5535: use correct values for PIO1 and PIO2 data timings
  pata_cmd64x: remove unused definitions
  ...

14 years agosata_via: Delay on vt6420 when starting ATAPI DMA write
Bart Hartgers [Sun, 14 Feb 2010 12:04:50 +0000 (13:04 +0100)]
sata_via: Delay on vt6420 when starting ATAPI DMA write

When writing a disc on certain lite-on dvd-writers (also rebadged
as optiarc/LG/...) connected to a vt6420, the ATAPI CDB ends
up in the datastream and on the disc, causing silent corruption.
Delaying between sending the CDB and starting DMA seems to
prevent this.

I do not know if there are burners that do not suffer from
this, but the patch should be safe for those as well.

There are many reports of this issue, but AFAICT no solution was
found before. For example:
http://lkml.indiana.edu/hypermail/linux/kernel/0802.3/0561.html

Signed-off-by: Bart Hartgers <bart.hartgers@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
14 years agoata: Detect Delkin Devices compact flash
Ben Gardner [Tue, 23 Feb 2010 18:41:22 +0000 (12:41 -0600)]
ata: Detect Delkin Devices compact flash

I have a Delkin Devices compact flash card that isn't being recognized using the
SATA/PATA drivers.
The card is recognized and works with the deprecated ATA drivers.

The error I am seeing is:
ata1.00: failed to IDENTIFY (device reports invalid type, err_mask=0x0)

I tracked it down to ata_id_is_cfa() in include/linux/ata.h.
The Delkin card has id[0] set to 0x844a and id[83] set to 0.
This isn't what the kernel expects and is probably incorrect.

The simplest work-around is to add a check for 0x844a to ata_id_is_cfa().

Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
14 years agopata_efar: Enable parallel scanning
Alan Cox [Wed, 17 Feb 2010 13:17:52 +0000 (13:17 +0000)]
pata_efar: Enable parallel scanning

Again originally proposed by Bartlomiej but this does it by using the
generic helper logic instead.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
14 years agopata_atiixp: enable parallel scan
Alan Cox [Wed, 17 Feb 2010 13:17:44 +0000 (13:17 +0000)]
pata_atiixp: enable parallel scan

This was originally proposed by Bartlomiej but as a device specific
expansion of the init_one function rather than making the helper more
generic.

Enable the parallel scan via the generic flags.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
14 years ago[libata] pata_atiixp: add locking for parallel scanning
Bartlomiej Zolnierkiewicz [Wed, 17 Feb 2010 13:17:31 +0000 (13:17 +0000)]
[libata] pata_atiixp: add locking for parallel scanning

This is similar change as commit 60c3be3 for ata_piix host driver
and while pata_atiixp doesn't enable parallel scan yet the race
could probably also be triggered by requesting re-scanning of both
ports at the same time using SCSI sysfs interface.

[Ported to current tree without other patch dependancies by Alan Cox]

Original is
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
This one is
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
14 years ago[libata] pata_efar: add locking for parallel scanning
Bartlomiej Zolnierkiewicz [Wed, 17 Feb 2010 13:16:58 +0000 (13:16 +0000)]
[libata] pata_efar: add locking for parallel scanning

Add clearing of UDMA enable bit also for PIO modes and then add
extra locking for parallel scanning.

This is similar change as commit 60c3be3 for ata_piix host driver
and while pata_efar doesn't enable parallel scan yet the race could
probably also be triggered by requesting re-scanning of both ports
at the same time using SCSI sysfs interface.

[Ported to current kernel without other patch dependancies by
 Alan Cox]

Original is
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
This one is
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
14 years agolibata: Pass host flags into the pci helper
Alan Cox [Tue, 23 Feb 2010 07:26:06 +0000 (02:26 -0500)]
libata: Pass host flags into the pci helper

This allows parallel scan and the like to be set without having to stop
using the existing full helper functions. This patch merely adds the argument
and fixes up the callers. It doesn't undo the special cases already in the
tree or add any new parallel callers.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
14 years ago[libata] pata_marvell: CONFIG_AHCI is really CONFIG_SATA_AHCI
Christoph Egger [Fri, 5 Feb 2010 15:26:35 +0000 (16:26 +0100)]
[libata] pata_marvell: CONFIG_AHCI is really CONFIG_SATA_AHCI

The marvell driver comtains a fallback to ahci for the sata ports
which is incorrectly checked as CONFIG_AHCI while the only AHCI config
item is actually called SATA_AHCI (which also sounds sensible
considering it's a fallback for the sata ports).

Signed-off-by: Christoph Egger <siccegge@stud.informatik.uni-erlangen.de>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
14 years agolibata: Allow pata_legacy to be built on non-ISA but PCI systems
Alan Cox [Mon, 8 Feb 2010 10:04:54 +0000 (10:04 +0000)]
libata: Allow pata_legacy to be built on non-ISA but PCI systems

This is needed for some unsupported hardware setups on strange 64bit
mainboards where crazy stuff has been done like putting flash ata adapters
on the LPC bus, or where the real hardware is hidden/confused.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
14 years agopata_pdc202xx_old: fix UDMA mode for PDC2026x chipsets
Bartlomiej Zolnierkiewicz [Sat, 13 Feb 2010 22:43:17 +0000 (17:43 -0500)]
pata_pdc202xx_old: fix UDMA mode for PDC2026x chipsets

PDC2026x chipsets need the same treatment as PDC20246 one.

This is completely untested but will hopefully fix UDMA issues
that people have been reporting against pata_pdc202xx_old for
the last couple of years.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
14 years agopata_pdc202xx_old: fix UDMA mode for Promise UDMA33 cards
Bartlomiej Zolnierkiewicz [Sat, 13 Feb 2010 13:35:53 +0000 (14:35 +0100)]
pata_pdc202xx_old: fix UDMA mode for Promise UDMA33 cards

On Monday 04 January 2010 02:30:24 pm Russell King wrote:

> Found the problem - getting rid of the read of the alt status register
> after the command has been written fixes the UDMA CRC errors on write:
>
> @@ -676,7 +676,8 @@ void ata_sff_exec_command(struct ata_port *ap, const struct
> ata_taskfile *tf)
>         DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command);
>
>         iowrite8(tf->command, ap->ioaddr.command_addr);
> -       ata_sff_pause(ap);
> +       ndelay(400);
> +//     ata_sff_pause(ap);
>  }
>  EXPORT_SYMBOL_GPL(ata_sff_exec_command);
>
>
> This rather makes sense.  The PDC20247 handles the UDMA part of the
> protocol.  It has no way to tell the PDC20246 to wait while it suspends
> UDMA, so that a normal register access can take place - the 246 ploughs
> on with the register access without any regard to the state of the 247.
>
> If the drive immediately starts the UDMA protocol after a write to the
> command register (as it probably will for the DMA WRITE command), then
> we'll be accessing the taskfile in the middle of the UDMA setup, which
> can't be good.  It's certainly a violation of the ATA specs.

Fix it by adding custom ->sff_exec_command method for UDMA33 chipsets.

Debugged-by: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
14 years ago[libata] pata_at91: fix backslash-continued string
Jeff Garzik [Thu, 4 Feb 2010 06:09:54 +0000 (01:09 -0500)]
[libata] pata_at91: fix backslash-continued string

Noticed and rough patch by Joe Perches.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
14 years agopata_via: store UDMA masks in via_isa_bridges table
Bartlomiej Zolnierkiewicz [Mon, 18 Jan 2010 17:17:12 +0000 (18:17 +0100)]
pata_via: store UDMA masks in via_isa_bridges table

* store UDMA masks in via_isa_bridges[] and while at it make "flags"
  field to be u8 instead of u16

* convert the driver to use UDMA masks from via_isa_bridges[]

* remove no longer needed VIA_UDMA* defines

Make some minor documentation and CodingStyle fixes while at it.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
14 years agopata_via: fix address setup timings underlocking
Bartlomiej Zolnierkiewicz [Mon, 18 Jan 2010 17:17:03 +0000 (18:17 +0100)]
pata_via: fix address setup timings underlocking

Correct via_do_set_mode() documentation while at it.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
14 years agopata_serverworks: fix error message
Bartlomiej Zolnierkiewicz [Mon, 18 Jan 2010 17:16:46 +0000 (18:16 +0100)]
pata_serverworks: fix error message

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
14 years agopata_serverworks: fix PIO setup for the second channel
Bartlomiej Zolnierkiewicz [Mon, 18 Jan 2010 17:16:38 +0000 (18:16 +0100)]
pata_serverworks: fix PIO setup for the second channel

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
14 years agopata_efar: fix secondary port support
Bartlomiej Zolnierkiewicz [Mon, 18 Jan 2010 17:16:03 +0000 (18:16 +0100)]
pata_efar: fix secondary port support

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
14 years agopata_cypress: fix PIO timings underclocking
Bartlomiej Zolnierkiewicz [Mon, 18 Jan 2010 17:15:47 +0000 (18:15 +0100)]
pata_cypress: fix PIO timings underclocking

Timing registers should be programmed with the desired number of clocks
minus one clock.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
14 years agopata_cs5535: use correct values for PIO1 and PIO2 data timings
Bartlomiej Zolnierkiewicz [Mon, 18 Jan 2010 17:15:38 +0000 (18:15 +0100)]
pata_cs5535: use correct values for PIO1 and PIO2 data timings

There shouldn't be any problems with it as IDE cs5535 host driver
has been using those values for years and they match values given
in the (publicly available) datasheet.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
14 years agopata_cmd64x: remove unused definitions
Bartlomiej Zolnierkiewicz [Mon, 18 Jan 2010 17:15:18 +0000 (18:15 +0100)]
pata_cmd64x: remove unused definitions

s/ARTIM2/ARTTIM23/ in cmd648_bmdma_stop() while at it

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
14 years agopata_cmd64x: cmd648_bmdma_stop() fix
Bartlomiej Zolnierkiewicz [Mon, 18 Jan 2010 17:15:11 +0000 (18:15 +0100)]
pata_cmd64x: cmd648_bmdma_stop() fix

Clear the primary channel pending interrupt bit
instead of the reserved one.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
14 years agopata_cmd64x: fix handling of address setup timings
Bartlomiej Zolnierkiewicz [Mon, 18 Jan 2010 17:15:04 +0000 (18:15 +0100)]
pata_cmd64x: fix handling of address setup timings

Account for the requirements of the DMA mode currently used
by the pair device.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
14 years agopata_cmd64x: fix PIO setup
Bartlomiej Zolnierkiewicz [Mon, 18 Jan 2010 17:14:55 +0000 (18:14 +0100)]
pata_cmd64x: fix PIO setup

Fix incorrect handling of recovery clocks value == 16 resulting
in overclocked recovery timings & potentially underclocked active
timings.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
14 years agopata_ali: documentation fixes
Bartlomiej Zolnierkiewicz [Mon, 18 Jan 2010 17:14:05 +0000 (18:14 +0100)]
pata_ali: documentation fixes

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
14 years agolibata: fix CFA handling in ide_timing_compute()
Bartlomiej Zolnierkiewicz [Mon, 18 Jan 2010 17:13:57 +0000 (18:13 +0100)]
libata: fix CFA handling in ide_timing_compute()

Use standard cycle timing for CFA PIO5 and PIO6 modes.

Based on commit 74638c8 for IDE subsystem.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
14 years agosata_via: Correctly setup PIO/DMA for pata slave on vt6421.
Bart Hartgers [Sat, 16 Jan 2010 23:56:54 +0000 (00:56 +0100)]
sata_via: Correctly setup PIO/DMA for pata slave on vt6421.

Before only the timings for master were set. Datasheet can be found
here: ftp://ftp.vtbridge.org/Docs/Storage/DS_VT6421A_100_CCPL.PDF
Surprisingly, a slave drive works without this patch. According to the
datasheet, the controller by default derives the DMA mode from the
Set Features command issued to a drive. Not sure about the PIO
timings, though. The real problem is that the timings for the master
effectively are the ones tuned for the slave. If these support
different UDMA-settings, there is trouble, especially when the slave
supports a higher UDMA than the master.

Anyhow, using the same mechanism for both master and slave seems like
a good idea.

Signed-off-by: Bart Hartgers <bart.hartgers@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
14 years agolibata: make functions/variables static
Robert Hancock [Wed, 20 Jan 2010 05:03:39 +0000 (23:03 -0600)]
libata: make functions/variables static

Make some variables in ahci and a function in pata_pcmcia static, as found
using sparse.

Signed-off-by: Robert Hancock <hancockrwd@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
14 years agolibata: implement spurious irq handling for SFF and apply it to piix
Tejun Heo [Tue, 19 Jan 2010 01:49:19 +0000 (10:49 +0900)]
libata: implement spurious irq handling for SFF and apply it to piix

Traditional IDE interface sucks in that it doesn't have a reliable IRQ
pending bit, so if the controller raises IRQ while the driver is
expecting it not to, the IRQ won't be cleared and eventually the IRQ
line will be killed by interrupt subsystem.  Some controllers have
non-standard mechanism to indicate IRQ pending so that this condition
can be detected and worked around.

This patch adds an optional operation ->sff_irq_check() which will be
called for each port from the ata_sff_interrupt() if an unexpected
interrupt is received.  If the operation returns %true,
->sff_check_status() and ->sff_irq_clear() will be cleared for the
port.  Note that this doesn't mark the interrupt as handled so it
won't prevent IRQ subsystem from killing the IRQ if this mechanism
fails to clear the spurious IRQ.

This patch also implements ->sff_irq_check() for ata_piix.  Note that
this adds slight overhead to shared IRQ operation as IRQs which are
destined for other controllers will trigger extra register accesses to
check whether IDE interrupt is pending but this solves rare screaming
IRQ cases and for some curious reason also helps weird BIOS related
glitch on Samsung n130 as reported in bko#14314.

  http://bugzilla.kernel.org/show_bug.cgi?id=14314

* piix_base_ops dropped as suggested by Sergei.

* Spurious IRQ detection doesn't kick in anymore if polling qc is in
  progress.  This provides less protection but some controllers have
  possible data corruption issues if the wrong register is accessed
  while a command is in progress.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Johannes Stezenbach <js@sig21.net>
Reported-by: Hans Werner <hwerner4@gmx.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
14 years agolibata: cleanup ata_sff_interrupt()
Tejun Heo [Tue, 19 Jan 2010 01:46:32 +0000 (10:46 +0900)]
libata: cleanup ata_sff_interrupt()

host->ports[i] is never NULL if i < host->n_ports and non-NULL return
from ata_qc_from_tag() guarantees that the returned qc is active.
Drop unnecessary tests.

Superflous () dropped as suggested by Sergei.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
14 years agoata_piix: IDE Mode SATA patch for Intel Cougar Point DeviceIDs
Seth Heasley [Wed, 13 Jan 2010 01:01:28 +0000 (17:01 -0800)]
ata_piix: IDE Mode SATA patch for Intel Cougar Point DeviceIDs

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
14 years agoahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs
Seth Heasley [Wed, 13 Jan 2010 01:00:18 +0000 (17:00 -0800)]
ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
14 years agoahci: Implement SATA AHCI FIS-based switching support
Shane Huang [Wed, 9 Dec 2009 09:23:04 +0000 (17:23 +0800)]
ahci: Implement SATA AHCI FIS-based switching support

Tested on AMD internal reference board.

Signed-off-by: Shane Huang <shane.huang@amd.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
14 years agopata_hpt366: remove irrelevant TODO
Sergei Shtylyov [Mon, 7 Dec 2009 19:39:38 +0000 (23:39 +0400)]
pata_hpt366: remove irrelevant TODO

HPT36x chips just don't have DPLL.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
14 years agopata_hpt{37x|3x2n}: improve timing register documentation
Sergei Shtylyov [Mon, 7 Dec 2009 19:38:11 +0000 (23:38 +0400)]
pata_hpt{37x|3x2n}: improve timing register documentation

Describe UDMA timing bits 18-20 and 21 separately; add a note to bit
31 about it being meaningful for PIO only.  Reformat the whole comment,
while at it...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
14 years agopata_hpt366: remove redundant code
Sergei Shtylyov [Mon, 7 Dec 2009 19:36:15 +0000 (23:36 +0400)]
pata_hpt366: remove redundant code

There's no need to clear the fast interrupt bit in hpt366_set_mode()
since we're doing it in hpt366_init_chipset() already.

While at it, rename 'addr1' local variable to 'addr' and
exclude 'ap->port_no' from its calculation as HPT36x are
single-channel-per-function chips.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
14 years agopata_hpt{37x|3x2n}: unify mode programming
Sergei Shtylyov [Mon, 7 Dec 2009 19:30:06 +0000 (23:30 +0400)]
pata_hpt{37x|3x2n}: unify mode programming

As these drivers' set_piomode() and set_dmamode() methods are almost
identical, factor out the common hpt{37x|3x2n}_set_mode() function
to be called by both of them, the same as in 'pata_hpt366' driver.

This results in ~5% decrease in the 'pata_hpt37x' driver binary
size and in ~4% decrease in the 'pata_hpt3x2n' driver binary size
(as measured on x86-32).

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
14 years agopata_hpt3x2n: always stretch UltraDMA timing
Sergei Shtylyov [Mon, 7 Dec 2009 19:25:52 +0000 (23:25 +0400)]
pata_hpt3x2n: always stretch UltraDMA timing

The UltraDMA Tss timing must be stretched with ATA clock of 66 MHz, but the
driver only does this when PCI clock is 66 MHz, whereas it always programs
DPLL clock (which is used as the ATA clock) to 66 MHz.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: <stable@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
14 years agopata_hpt37x: use ATA_DMA_* constants
Sergei Shtylyov [Fri, 4 Dec 2009 20:37:43 +0000 (00:37 +0400)]
pata_hpt37x: use ATA_DMA_* constants

Use ATA_DMA_* constants instead of the bare numbers for the BMIDE registers.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
14 years agoMAINTAINERS: Add git tree to x86 Platform Drivers
Thadeu Lima de Souza Cascardo [Mon, 1 Mar 2010 19:03:48 +0000 (14:03 -0500)]
MAINTAINERS: Add git tree to x86 Platform Drivers

Add the x86 platform driver git tree to MAINTAINERS.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
14 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Mon, 1 Mar 2010 18:38:09 +0000 (10:38 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (62 commits)
  Input: atkbd - release previously reserved keycodes 248 - 254
  Input: add KEY_WPS_BUTTON definition
  Input: ads7846 - add regulator support
  Input: winbond-cir - fix suspend/resume
  Input: gamecon - use pr_err() and friends
  Input: gamecon - constify some of the setup structures
  Input: gamecon - simplify pad type handling
  Input: gamecon - simplify coordinate calculation for PSX
  Input: gamecon - fix some formatting issues
  Input: gamecon - add rumble support for N64 pads
  Input: wacom - add device type to device name string
  Input: s3c24xx_ts - report touch only when stylus is down
  Input: s3c24xx_ts - re-enable IRQ on resume
  Input: wacom - constify product features data
  Input: wacom - use per-device instance of wacom_features
  Input: sh_keysc - enable building on SH-Mobile ARM
  Input: wacom - get features from driver info
  Input: rotary-encoder - set gpio direction for each requested gpio
  Input: sh_keysc - update the driver with mode 6
  Input: sh_keysc - switch to using bitmaps
  ...

14 years agoMerge branch 'acpica' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux...
Linus Torvalds [Mon, 1 Mar 2010 18:36:22 +0000 (10:36 -0800)]
Merge branch 'acpica' of git://git./linux/kernel/git/lenb/linux-acpi-2.6

* 'acpica' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI: replace acpi_integer by u64
  ACPICA: Update version to 20100121.
  ACPICA: Remove unused uint32_struct type
  ACPICA: Disassembler: Remove obsolete "Integer64" field in parse object
  ACPICA: Remove obsolete ACPI_INTEGER (acpi_integer) type
  ACPICA: Predefined name repair: fix NULL package elements
  ACPICA: AcpiGetDevices: Eliminate unnecessary _STA calls
  ACPICA: Update all ACPICA copyrights and signons to 2010
  ACPICA: Update for new gcc-4 warning options

14 years agoasus-acpi: remove duplicate comparison of asus_model strings
Roel Kluin [Mon, 1 Mar 2010 18:26:22 +0000 (13:26 -0500)]
asus-acpi: remove duplicate comparison of asus_model strings

These tests already occur elsewhere

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Karol Kozimor <sziwan@users.sourceforge.net>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
14 years agoDaVinci DM365: Adding support for SPI EEPROM
Sandeep Paulraj [Mon, 1 Feb 2010 14:51:45 +0000 (09:51 -0500)]
DaVinci DM365: Adding support for SPI EEPROM

The DM365 Spectrum Digital EVM comes with an EEPROM
connected to SPI0.
This patch adds support for the SPI EEPROM.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
14 years agoDaVinci DM365: Adding DM365 SPI support
Sandeep Paulraj [Mon, 1 Feb 2010 14:51:31 +0000 (09:51 -0500)]
DaVinci DM365: Adding DM365 SPI support

This patch adds SPI init for DM365.
It does the following
1) Initializes SPI0
2) Defines resources to be used by SPI0
3) Adds platform data for SPI0

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
14 years agoDaVinci DM355: Modifications to DM355 SPI support
Sandeep Paulraj [Mon, 1 Feb 2010 14:51:15 +0000 (09:51 -0500)]
DaVinci DM355: Modifications to DM355 SPI support

This patch does the following

1) Minor change to the SPI clocks making it
similar to DM365.
2) Changing the interrupt used by SPI0
3) Adding EDMA resources that can be used by SPI0
4) Adding platform specific data.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
14 years agoDaVinci: SPI: Adding header file for SPI support.
Sandeep Paulraj [Mon, 1 Feb 2010 14:51:02 +0000 (09:51 -0500)]
DaVinci: SPI: Adding header file for SPI support.

This patch adds "spi.h" header file that will be used by board and
architecture specific code.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
14 years agodavinci: dm646x: CDCE clocks: davinci_clk converted to clk_lookup
Kevin Hilman [Mon, 11 Jan 2010 16:22:23 +0000 (08:22 -0800)]
davinci: dm646x: CDCE clocks: davinci_clk converted to clk_lookup

Remove unneeded 'struct davinci_clk' wrapper around 'struct
clk_lookup' and use clk_lookup directly.

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>