Masahiro Yamada [Tue, 4 Aug 2015 11:21:04 +0000 (20:21 +0900)]
ARM: dts: uniphier: add ProXstream2 and PH1-LD6b SoC/board support
Initial version of DTSI for ProXstream2 and PH1-LD6b and DTS for
PH1-LD6b reference board.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
[olof: sort Makefile entries]
Signed-off-by: Olof Johansson <olof@lixom.net>
Masahiro Yamada [Tue, 4 Aug 2015 11:21:03 +0000 (20:21 +0900)]
ARM: dts: uniphier: add PH1-Pro5 SoC support
Initial version of UniPhier PH1-Pro5 device tree.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Masahiro Yamada [Tue, 4 Aug 2015 11:21:02 +0000 (20:21 +0900)]
ARM: dts: uniphier: add I2C controller device nodes
Add I2C controller device nodes for PH1-sLD3, PH1-LD4, PH1-sLD8
(FIFO-less I2C) and PH1-Pro4 (FIFO-builtin I2C).
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 11 Aug 2015 13:01:26 +0000 (15:01 +0200)]
Merge tag 'samsung-dt-1' of git://git./linux/kernel/git/kgene/linux-samsung into next/dt
Samsung 1st DT updates for v4.3
- for exynos3250
: update video-phy node with syscon phandle
- for exynos4210
: add CPU OPP and regulator supply property
: use labels for overriding nodes for exynos4210-universal_c210
- for exynos4412-trats2
: set max17047 over heat and voltage thresholds
- for exynos5250 and 5420
: extend exynos5250/5420-pinctrl nodes using labels
: include exynos5250/5420-pinctrl after the nodes definitions
- for exynos5410-smdk5410
: clean up indentation
- for exynos5422-odroidxu3
: define default thermal-zones for exynos5422
: enable USB3 regulators, TMU and thermal-zones
: add pwm-fan node
* tag 'samsung-dt-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: dts: Extend exynos5420-pinctrl nodes using labels instead of paths
ARM: dts: Include exynos5420-pinctrl after the nodes were defined for exynos5420
ARM: dts: Extend exynos5250-pinctrl nodes using labels instead of paths
ARM: dts: Include exynos5250-pinctrl after the nodes were defined for exynos5250
ARM: dts: Enable thermal-zones for exynos5422-odroidxu3
ARM: dts: Define default thermal-zones for exynos5422
ARM: dts: Enable TMU for exynos5422-odroidxu3
ARM: dts: Add pwm-fan node for exynos5422-odroidxu3
ARM: dts: Use labels for overriding nodes for exynos4210-universal_c210
ARM: dts: Set max17047 over heat and voltage thresholds for exynos4412-trats2
ARM: dts: Enable USB3 regulators for exynos5422-odroidxu3
ARM: dts: Clean up indentation for exynos5410-smdk5410
ARM: dts: add CPU OPP and regulator supply property for exynos4210
ARM: dts: Update video-phy node with syscon phandle for exynos3250
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Thu, 6 Aug 2015 08:12:13 +0000 (10:12 +0200)]
Merge tag 'sunxi-dt-for-4.3' of https://git./linux/kernel/git/mripard/linux into next/dt
Allwinner Device Tree changes for 4.3
A bunch of device tree patches that:
- Enable the OTG controller on some boards
- Various additions to the existing boards
- New boards: A33 Ippo Q8H, Iteaduino Plus,
* tag 'sunxi-dt-for-4.3' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (35 commits)
ARM: dts: sun7i: Change cubietruck wifi enable pin to use mmc-pwrseq
ARM: dts: sun5i: hsg-h702: Enable USB OTG controller
ARM: dts: sun5i: hsg-h702: Enable side volume buttons with LRADC
ARM: dts: sun8i: Enable USB DRC on Ippo Q8H-A33 tablet
ARM: dts: sun5i: Enable USB DRC on A13 OLinuxIno
ARM: dts: sun5i: Enable USB DRC on A10s OLinuxIno Micro
ARM: dts: sun4i: Enable USB DRC on A10 OLinuxIno Lime
ARM: sunxi: dt: Convert users to the PIO interrupts binding
ARM: dts: sun4i: Add Iteaduino Plus A10
ARM: dts: A10s-OLinuxIno: Add a node for axp152 pmic
ARM: dts: axp152: Add a dtsi file for the axp152 pmic
ARM: dts: sun6i: Enable otg controller on the cs908
ARM: dts: sun4i: Enable otg controller on the mini-x
ARM: dts: sun4i: Enable otg controller on the ba10-tvbox
ARM: dts: sunxi: Add regulator-boot-on to usb host port regulator nodes
devicetree: Add msi to the vendor-prefix list
ARM: sun8i: dts: Add Ippo-q8h v1.2 with A33
ARM: dts: sun8i: sina33: Enable USB hosts
ARM: dts: sun8i: Enable USB host on GA10H-A33 tablets
ARM: dts: sun8i: Enable USB DRC on GA10H-A33 tablets
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Joachim Eastwood [Thu, 30 Jul 2015 22:24:27 +0000 (00:24 +0200)]
ARM: dts: lpc4350-hitex-eval: add emc pins and static memory devices
Setup the emc pins used by external memory devices and add
configuration for the devices found on the Hitex eval board.
The Hitex eval board has a NOR Flash attached to chip select 0
and 512 kB of SRAM on chip select 2.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Ariel D'Alessandro [Thu, 30 Jul 2015 22:24:26 +0000 (00:24 +0200)]
ARM: dts: lpc4350-hitex-eval: add ethernet
Enable Ethernet and add pin muxing and set the correct
frequency on the enet tx clock input.
Signed-off-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar>
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Ariel D'Alessandro [Thu, 30 Jul 2015 22:24:25 +0000 (00:24 +0200)]
ARM: dts: lpc4350-hitex-eval: add pinctrl and uart0 muxing
Setup pin muxing and properties for the debug console on uart0.
Signed-off-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar>
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Joachim Eastwood [Thu, 30 Jul 2015 22:24:24 +0000 (00:24 +0200)]
ARM: dts: lpc4357-ea4357: add mmio-gpio leds
Hook up LEDs on the outputs from the D-type flip-flop found on
the address/data bus.
Note that the LEDx label in the schematics is reversed in regard
to the bits on the data bus. Hence the reverse ordering used here.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Joachim Eastwood [Thu, 30 Jul 2015 22:24:23 +0000 (00:24 +0200)]
ARM: dts: lpc4357-ea4357: add emc pins and static memory devices
Setup the emc pins used by external memory devices and add
configuration for the devices found on the EA4357 devkit.
The EA4357 devkit has a NOR Flash attached to chip select 0
and a D-type flip-flop used for LEDs on chip select 2.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Joachim Eastwood [Thu, 30 Jul 2015 22:24:22 +0000 (00:24 +0200)]
ARM: dts: lpc4357-ea4357: add usb0
Enable USB0 on the EA4357 devkit and setup the required USB0
control pins.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Joachim Eastwood [Thu, 30 Jul 2015 22:24:21 +0000 (00:24 +0200)]
ARM: dts: lpc18xx: add pl172 memory-controller node
All devices in the LPC18xx/43xx familiy contain a ARM PL172
MultiPort Memory Controller (MPMC).
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Joachim Eastwood [Thu, 30 Jul 2015 22:24:20 +0000 (00:24 +0200)]
ARM: dts: lpc18xx: add pl111 lcd controller node
NXP LPC185x and LPC435x/70 devices contain a ARM PL111 lcd controller.
Signed-off-by: Joachim Eastwood <joachim.eastwood@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Joachim Eastwood [Thu, 30 Jul 2015 22:24:19 +0000 (00:24 +0200)]
ARM: dts: lpc18xx: add usb otg phy node
Add the USB OTG phy under the CREG syscon node and attach it to
the USB0 EHCI controller.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Wed, 5 Aug 2015 09:10:30 +0000 (11:10 +0200)]
Merge tag 'mvebu-dt-4.3-2' of git://git.infradead.org/linux-mvebu into next/dt
mvebu dt changes for v4.3 (part #2)
Add support Buffalo Linkstation LS-WTGL
* tag 'mvebu-dt-4.3-2' of git://git.infradead.org/linux-mvebu:
ARM: dts: orion5x: add buffalo linkstation ls-wtgl
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Wed, 5 Aug 2015 09:04:18 +0000 (11:04 +0200)]
Merge tag 'zynq-dt-for-4.3' of https://github.com/Xilinx/linux-xlnx into next/dt
arm: Xilinx Zynq dt patches for v4.3
- Add ECC for Synopsys MC
- Add OCM, pushbuttons to zc702
* tag 'zynq-dt-for-4.3' of https://github.com/Xilinx/linux-xlnx:
ARM: zynq: DT: Add zc702 pushbuttons to DT as gpio-keys
ARM: zynq: DT: Add missing interrupt for L2 pl310
Documentation: devicetree: Add ECC information to synopsys ddr controller
ARM: dts: zynq: Add OCM node
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Wed, 5 Aug 2015 08:45:45 +0000 (10:45 +0200)]
Merge tag 'qcom-dt-for-4.3' of git://codeaurora.org/quic/kernel/agross-msm into next/dt
Qualcomm ARM Based Device Tree Updates for v4.3
* Switch to use pinctrl compatible for GPIOs
* Add RPM regulators for MSM8960
* Add SPI Ethernet support on MSM8960 CDP
* Add SMEM support along with dependencies
* Add PM8921 support for GPIO and MPP
* Fix GSBI cell index
* Switch to use real regulators on APQ8064 w/ SDCC
* tag 'qcom-dt-for-4.3' of git://codeaurora.org/quic/kernel/agross-msm:
ARM: dts: qs600: Add real regulators to sdcc
ARM: dts: ifc6410: add real regulators for sdcc nodes.
ARM: dts: apq8064: remove temporary fixed regulator for mmc
ARM: dts: apq8064: fix missing gsbi cell-index
ARM: dts: apq8064: Add DT support for GSBI6 and for UART pin mux
ARM: dts: apq8064: add pm8921 mpp support
ARM: dts: apq8064: Add pm8921 mfd and its gpio node
ARM: dts: msm8974: Add smem reservation and node
ARM: dts: msm8974: Add tcsr mutex node
ARM: dts: qcom: Add ks8851 node for wired ethernet
ARM: dts: qcom: Add MSM8960 CDP RPM regulators
ARM: dts: qcom: Add MSM8960 RPM and RPM regulator nodes
ARM: dts: qcom: Replace gpio node with pinctrl node
ARM: dts: qcom: Replace gpio node with pinctrl node
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Wed, 5 Aug 2015 08:39:05 +0000 (10:39 +0200)]
Merge tag 'at91-dt' of git://git./linux/kernel/git/nferre/linux-at91 into next/dt
First batch of DT changes for 4.3:
- some fixes on sama5d4 ADC definition
- adding Image Sensor Interface (aka ISI) on at91sam9m10g45ek board
- update rst controller compatible string on sama5 machines
- new sama5d2 DT definition and its reference board:
the sama5d2 Xplained. Minimal configuration for now.
* tag 'at91-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
ARM: at91/dt: add minimal sama5d2 Xplained board
ARM: at91/dt: add basic dtsi for sama5d2 SoC
ARM: at91/dt: sama5: update rstc to correct compatible string
ARM: at91/dt: add isi & ov2640 dt nodes for at91sam9m10g45ek board
ARM: at91/dt: sama5d4: move ADC pinctrl to board device trees
ARM: at91/dt: sama5d4: fix external trigger property
Signed-off-by: Olof Johansson <olof@lixom.net>
Hans de Goede [Fri, 31 Jul 2015 15:41:52 +0000 (17:41 +0200)]
ARM: dts: sun7i: Change cubietruck wifi enable pin to use mmc-pwrseq
The wifi-enable pin of the ap6210 module is not really a regulator,
switch to the mmc-pwrseq framework for controlling it. This more
accurately reflects how the hardware actually works.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
[maxime: Changed the name of the pinctrl node and re-ordered it]
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Chen-Yu Tsai [Fri, 31 Jul 2015 14:40:59 +0000 (22:40 +0800)]
ARM: dts: sun5i: hsg-h702: Enable USB OTG controller
This tablet has proper USB OTG support, using 3 GPIO pins for
ID and VBUS detection, and also VBUS control.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Chen-Yu Tsai [Fri, 31 Jul 2015 14:40:58 +0000 (22:40 +0800)]
ARM: dts: sun5i: hsg-h702: Enable side volume buttons with LRADC
The tablet has volume up/down buttons on the side, connected to the LRADC.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Hans de Goede [Fri, 31 Jul 2015 12:53:38 +0000 (14:53 +0200)]
ARM: dts: sun8i: Enable USB DRC on Ippo Q8H-A33 tablet
Enable the otg/drc usb controller on the Ippo Q8H-A33 tablet, for now it
is enabled in host-only mode, because true OTG support requires support
for detecting and enabling Vbus through the axp221 pmic.
For this to work the Vbus on the port must be enabled by u-boot,
or a powered hub must be used.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Mark Janssen [Fri, 31 Jul 2015 12:53:37 +0000 (14:53 +0200)]
ARM: dts: sun5i: Enable USB DRC on A13 OLinuxIno
Enable the otg/drc usb controller on the A13 OLinuxIno.
Signed-off-by: Mark Janssen <mark@sig-io.nl>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Hans de Goede [Fri, 31 Jul 2015 12:53:36 +0000 (14:53 +0200)]
ARM: dts: sun5i: Enable USB DRC on A10s OLinuxIno Micro
Enable the otg/drc usb controller on the A10s OLinuxIno Micro.
Note the A10s OlinuxIno Micro always has some voltage on its otg power
pin, even if the usb-vbus0-regulator is disabled, the leaked voltage is
enough to make vbus-det always report 1, so we do not use vbus-det on
this board.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Remy van Elst [Fri, 31 Jul 2015 08:59:50 +0000 (10:59 +0200)]
ARM: dts: sun4i: Enable USB DRC on A10 OLinuxIno Lime
Enable the otg/drc usb controller on the A10 OLinuxIno Lime.
Signed-off-by: Remy van Elst <relst@relst.nl>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Ezra Savard [Fri, 29 Aug 2014 18:10:33 +0000 (11:10 -0700)]
ARM: zynq: DT: Add zc702 pushbuttons to DT as gpio-keys
Adds the two MIO connected pushbuttons on the zc702 board to the devicetree as a
single multi-key device for us with the gpio-keys driver.
Signed-off-by: Ezra Savard <ezra.savard@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Alex Wilson [Sat, 18 Jul 2015 02:23:55 +0000 (20:23 -0600)]
ARM: zynq: DT: Add missing interrupt for L2 pl310
Add pl310 interrupt to the Zynq devicetree.
Signed-off-by: Alex Wilson <alex.david.wilson@gmail.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Punnaiah Choudary Kalluri [Thu, 27 Nov 2014 15:17:33 +0000 (20:47 +0530)]
Documentation: devicetree: Add ECC information to synopsys ddr controller
Add ECC information to synopsys ddr memory controller.
Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Thu, 12 Feb 2015 09:59:17 +0000 (10:59 +0100)]
ARM: dts: zynq: Add OCM node
Add OCM node for all zynq boards. OCM location
can changed but for all current boards this
is the location where OCM is.`
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Nicolas Ferre [Thu, 18 Jun 2015 12:55:03 +0000 (14:55 +0200)]
ARM: at91/dt: add minimal sama5d2 Xplained board
Add minimal support for the new sama5d2 Xplained board. Only USB,
spi/i2c, ethernet and uart/usart peripherals added.
With this DTS file you can boot the board and begin to play with it.
Rootfs on NFS and sd card have successfully been tested.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Ludovic Desroches [Thu, 18 Jun 2015 12:48:28 +0000 (14:48 +0200)]
ARM: at91/dt: add basic dtsi for sama5d2 SoC
Only the basic support for this new Atmel Cortex-A5 SoC. A subset of the
peripherals is setup to allow booting.
IRQ, clocks, USB, crypto, timers, rtc, ethernet, spi/i2c and
uart/usart peripheral nodes are added.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Josh Wu [Mon, 20 Jul 2015 09:32:06 +0000 (17:32 +0800)]
ARM: at91/dt: sama5: update rstc to correct compatible string
They'll use "atmel,sama5d3-rstc" for reset function.
Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
[nicolas.ferre@atmel.com: add the old compatible string as a fallback]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Josh Wu [Tue, 16 Jun 2015 10:08:34 +0000 (18:08 +0800)]
ARM: at91/dt: add isi & ov2640 dt nodes for at91sam9m10g45ek board
First we group the isi data pins, and for now we only use 0~7 data pins
with HSYNC and VSYNC.
Also add the link for atmel-isi and ov2640 sensor node.
Signed-off-by: Josh Wu <josh.wu@atmel.com>
[nicolas.ferre@atmel.com: move the pinctrl properties in board .dts file]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Srinivas Kandagatla [Tue, 28 Jul 2015 08:13:05 +0000 (09:13 +0100)]
ARM: dts: qs600: Add real regulators to sdcc
This patch adds real regulators to sdcc nodes.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>
Srinivas Kandagatla [Tue, 28 Jul 2015 08:12:58 +0000 (09:12 +0100)]
ARM: dts: ifc6410: add real regulators for sdcc nodes.
This patch adds real regulators for all the three sdcc nodes.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>
Srinivas Kandagatla [Tue, 28 Jul 2015 08:12:51 +0000 (09:12 +0100)]
ARM: dts: apq8064: remove temporary fixed regulator for mmc
This patch removes temporary fixed regluator use for mmc.
Board files should use the regulators which are wiredup appropriately.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>
Olof Johansson [Tue, 28 Jul 2015 16:25:39 +0000 (18:25 +0200)]
Merge tag 'socfpga_dts_for_v4.3' of git://git./linux/kernel/git/dinguyen/linux into next/dt
SoCFPGA DTS updates for v4.3
- Update clocking for DTS nodes
- Add DTS board file for Terasic DE0 Atlas board
- Use stdout-patch for chosen node
- Enable prefetch-data and prefetch-instr
* tag 'socfpga_dts_for_v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
ARM: socfpga: dts: add osc1 as a possible parent for dbg_base_clk
ARM: socfpga: dts: add missing clock gates to socfpga.dtsi
ARM: socfpga: dts: Fix gpio dts entry for the correct clock
ARM: socfpga: dts: Correct the parent clock for l3_sp_clk and dbg_clk
ARM: dts: socfpga: Add support of Terasic DE0 Atlas board
ARM: dts: socfpga: use stdout-path for chosen node
ARM: dts: socfpga: enable the data and instruction prefetch for the l2 cache
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 28 Jul 2015 16:16:36 +0000 (18:16 +0200)]
Merge tag 'v4.2-next-dts' of https://github.com/mbgg/linux-mediatek into next/dt
- ARM: dts: mediatek: add mt6580 basic support
- Document: DT: Add bindings for mediatek MT6580 SoC Platform
- ARM: dts: mediatek mt8135: Use real UART clocks
- ARM: dts: mt8135-evbp1: Add PMIC support
- ARM: dts: mt8135: Add pmic wrapper nodes
- ARM: dts: mediatek: Enable clock support for Mediatek MT8135.
* tag 'v4.2-next-dts' of https://github.com/mbgg/linux-mediatek:
ARM: dts: mediatek: add mt6580 basic support
Document: DT: Add bindings for mediatek MT6580 SoC Platform
ARM: dts: mediatek mt8135: Use real UART clocks
ARM: dts: mt8135-evbp1: Add PMIC support
ARM: dts: mt8135: Add pmic wrapper nodes
ARM: dts: mediatek: Enable clock support for Mediatek MT8135.
Signed-off-by: Olof Johansson <olof@lixom.net>
Maxime Ripard [Wed, 17 Jun 2015 09:44:24 +0000 (11:44 +0200)]
ARM: sunxi: dt: Convert users to the PIO interrupts binding
The current DTs were setting the cell size to 2, but used the default xlate
function that was assuming an interrupt cell size of 1, leading to the
second part of the cell (the flags) being ignored, while we were having an
inconsistent binding between the interrupts and gpio (that could also be
used as interrupts).
That "binding" doesn't work either with newer SoCs that have multiple irq
banks.
Now that we fixed the pinctrl driver to handle this like it should always
have been handled, convert the DT users, and while we're at it, remove the
size-cells property of PIO that is completely useless.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Alexandre Belloni [Mon, 22 Jun 2015 07:45:48 +0000 (09:45 +0200)]
ARM: at91/dt: sama5d4: move ADC pinctrl to board device trees
The ADC pinctrl is board specific, move it to the board device trees.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Alexandre Belloni [Mon, 22 Jun 2015 07:45:47 +0000 (09:45 +0200)]
ARM: at91/dt: sama5d4: fix external trigger property
The property is actually atmel,adc-use-external-triggers.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Srinivas Kandagatla [Mon, 27 Jul 2015 13:52:19 +0000 (14:52 +0100)]
ARM: dts: apq8064: fix missing gsbi cell-index
Without this i2c instance for missing cell-index nodes would fail, fix
it by adding correct cell-index.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>
Pramod Gurav [Mon, 27 Jul 2015 13:52:10 +0000 (14:52 +0100)]
ARM: dts: apq8064: Add DT support for GSBI6 and for UART pin mux
This change adds DT support for GSBI6 and muxes the gpio pins
as UART lines. Also defines a alias for serial port on these lines.
Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com>
[Srinivas Kandagatla]: fix pinctrl location and rename alias correctly
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>
Srinivas Kandagatla [Mon, 27 Jul 2015 13:52:02 +0000 (14:52 +0100)]
ARM: dts: apq8064: add pm8921 mpp support
This patch adds pmic pm8921 mpp gpio controller node.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>
Srinivas Kandagatla [Mon, 27 Jul 2015 13:51:52 +0000 (14:51 +0100)]
ARM: dts: apq8064: Add pm8921 mfd and its gpio node
This patch adds pmic gpio node to the device tree, this node is
necessary for devices like wlan to control reset gpio.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>
Masahiro Yamada [Sat, 25 Jul 2015 07:23:23 +0000 (16:23 +0900)]
ARM: dts: UniPhier: add UART and USB pinmux nodes
The DT nodes in uniphier-pinctrl.dtsi provide the default pinctrl
settings that would be suitable for most boards. You can still
override them in your board DTS file if necessary.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Masahiro Yamada [Sat, 25 Jul 2015 07:23:22 +0000 (16:23 +0900)]
ARM: dts: UniPhier: add pinctrl device nodes
Add the pinctrol device nodes for UniPhier PH1-LD4, PH1-Pro4,
and PH1-sLD8.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Mon, 27 Jul 2015 12:48:07 +0000 (14:48 +0200)]
Merge tag 'omap-for-v4.3/dt-dm814x' of git://git./linux/kernel/git/tmlind/linux-omap into next/dt
omap dts changes for minimal dm814x support for v4.3 merge window.
These changes make dm814x boot and adds minimal board support for
dm814x-evm and hp t410.
Note that to boot these depend on omap-for-v4.3/soc-signed branch,
but as dm814x support is currently broken, these can be merged
separately with the other dts changes.
* tag 'omap-for-v4.3/dt-dm814x' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: Add custom abort handler for t410
ARM: dts: Add minimal support for HP T410
ARM: dts: Add minimal dts support for dm8148-evm
ARM: dts: Add minimal clocks for dm814x
ARM: dts: Add minimal dm814x support
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Mon, 27 Jul 2015 12:28:23 +0000 (14:28 +0200)]
Merge tag 'renesas-dt2-for-v4.3' of git://git./linux/kernel/git/horms/renesas into next/dt
Second Round of Renesas ARM Based SoC DT Updates for v4.3
* Add Audio MIX and CTU support to r8a779[01] SoCs
* Correct IRQ sense for adv7511 on lager board
* Add sound label to koelsch and lager boards
* Add IIC support to emev2 SoC
* tag 'renesas-dt2-for-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: r8a7791: Add Audio MIX support on DTSI
ARM: shmobile: r8a7791: Add Audio CTU support on DTSI
ARM: shmobile: r8a7790: Add Audio MIX support on DTSI
ARM: shmobile: r8a7790: Add Audio CTU support on DTSI
ARM: shmobile: lager: Fix adv7511 IRQ sensing
ARM: shmobile: koelsch: add sound label on DTS
ARM: shmobile: lager: add sound label on DTS
ARM: shmobile: emev2: kzm9d: enable IIC busses
ARM: shmobile: emev2: add IIC cores to dtsi
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Mon, 27 Jul 2015 12:26:03 +0000 (14:26 +0200)]
Merge tag 'stm32-dt-for-v4.3-1b' of https://git./linux/kernel/git/mcoquelin/stm32 into next/dt
STM32 DT updates for v4.3, round 1.
Highlights:
-----------
- Add RCC clocks support to STM32F429
- Add STM32429i-EVAL board support
- Use stdout-path instead of linux,stdout-path in Disco board
* tag 'stm32-dt-for-v4.3-1b' of https://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/stm32:
ARM: dts: Use stdout-path in STM32F429 Discovery board
ARM: dts: Add STM32429i-EVAL board support
ARM: dts: stm32f429: Adopt STM32F4 clock driver
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Mon, 27 Jul 2015 12:23:46 +0000 (14:23 +0200)]
Merge tag 'sti-dt-for-v4.3-1' of https://git./linux/kernel/git/mcoquelin/sti into next/dt
STi DT update for v4.3, round 1.
Highlights:
-----------
- Add pinctrl configurations for transport stream channels
- Add cpu-release-addr properties to STiH407 and STiH418
- Add PWM regulator support so STIH407 family
- Add BDISP node to STiH407
* tag 'sti-dt-for-v4.3-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/sti:
ARM: DT: STiH410: Add bdisp dt nodes
ARM: STi: STiH407: Add PWM Regulator node
ARM: STi: STiH407: Move PWM nodes STiH407 => STiH407-family
ARM: STi: DT: Rename st_pll3200c32_407_c0_x into st_pll3200c32_cx_x
ARM: STi: DT: STiH418: Add cpu-release-addr dt property.
ARM: STi: DT: STiH407: Add cpu-release-addr dt property.
ARM: STi: DT: Add STiH407 family mtsin0 pinctrl configuration
ARM: STi: DT: Add STiH407 family tsout1 pinctrl configuration
ARM: STi: DT: Add STiH407 family tsout0 pinctrl configuration
ARM: STi: DT: Add STiH407 family tsin5 pinctrl configuration
ARM: STi: DT: Add STiH407 family tsin4 pinctrl configuration
ARM: STi: DT: Add STiH407 family tsin3 pinctrl configuration
ARM: STi: DT: Add STiH407 family tsin2 pinctrl configuration
ARM: STi: DT: Add STiH407 family tsin1 pinctrl configuration
ARM: STi: DT: Add STiH407 family tsin0 pinctrl configuration
Signed-off-by: Olof Johansson <olof@lixom.net>
Roger Shimizu [Tue, 21 Jul 2015 14:49:16 +0000 (23:49 +0900)]
ARM: dts: orion5x: add buffalo linkstation ls-wtgl
Add dts file to support Buffalo Linkstation LS-WTGL,
which is marvell orion5x based 2-bay 3.5" HDD NAS.
Product info:
- (JPN) http://buffalo.jp/products/catalog/storage/ls-wtgl_r1/
- (ENG) http://www.buffalotech.com/support-and-downloads/download/LinkStation_Pro_Duo_Manual_web.pdf
Signed-off-by: Roger Shimizu <rogershimizu@gmail.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Dinh Nguyen [Sat, 25 Jul 2015 03:10:59 +0000 (22:10 -0500)]
ARM: socfpga: dts: add osc1 as a possible parent for dbg_base_clk
The dbg_base_clk can also have osc1 has a parent.
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Tony Lindgren [Fri, 24 Jul 2015 05:33:19 +0000 (22:33 -0700)]
ARM: OMAP2+: Add custom abort handler for t410
Similar to commit
fdf4850cb5b2 ("ARM: BCM5301X: workaround suppress fault"),
let's add custom handling for the aborts on t410 that prevent booting:
Unhandled fault: imprecise external abort (0xc06) at 0xee091fb0
pgd =
ee4bc000
[
ee091fb0] *pgd=
ae00041e(bad)
Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007
Cc: Matthijs van Duin <matthijsvanduin@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Fri, 24 Jul 2015 05:33:19 +0000 (22:33 -0700)]
ARM: dts: Add minimal support for HP T410
Add minimal support for HP T410.
Cc: Matthijs van Duin <matthijsvanduin@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Fri, 24 Jul 2015 05:33:18 +0000 (22:33 -0700)]
ARM: dts: Add minimal dts support for dm8148-evm
Add minimal dts support for dm8148-evm.
Cc: Matthijs van Duin <matthijsvanduin@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Fri, 24 Jul 2015 05:33:18 +0000 (22:33 -0700)]
ARM: dts: Add minimal clocks for dm814x
Use fixed clocks until we have a clock driver for the PLL.
The mux and divider composite clocks work the same way
as on dm816x and am335x.
Cc: Matthijs van Duin <matthijsvanduin@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Fri, 24 Jul 2015 05:33:18 +0000 (22:33 -0700)]
ARM: dts: Add minimal dm814x support
Add minimal dm814x support.
Cc: Matthijs van Duin <matthijsvanduin@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Bjorn Andersson [Fri, 26 Jun 2015 21:50:17 +0000 (14:50 -0700)]
ARM: dts: msm8974: Add smem reservation and node
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Andy Gross <agross@codeaurora.org>
Bjorn Andersson [Fri, 26 Jun 2015 21:50:16 +0000 (14:50 -0700)]
ARM: dts: msm8974: Add tcsr mutex node
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Andy Gross <agross@codeaurora.org>
Stephen Boyd [Tue, 16 Jun 2015 20:31:15 +0000 (13:31 -0700)]
ARM: dts: qcom: Add ks8851 node for wired ethernet
The micrel ks8851 device is present on MSM8960 CDP boards. It is
connected to two regulators, one controlled via a gpio and
another controlled via the RPM. Add the gsbi, spi, gpio
regulator, and micrel ks8851 nodes so that ethernet works
properly.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>
Stephen Boyd [Tue, 16 Jun 2015 20:31:14 +0000 (13:31 -0700)]
ARM: dts: qcom: Add MSM8960 CDP RPM regulators
Add RPM regulators and configure their constraints on the MSM8960
CDP so that we can control these supplies.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>
Stephen Boyd [Tue, 16 Jun 2015 20:31:13 +0000 (13:31 -0700)]
ARM: dts: qcom: Add MSM8960 RPM and RPM regulator nodes
Add the basic RPM and RPM regulator nodes that boards can fill in
with their board specific details.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>
Stephen Boyd [Tue, 16 Jun 2015 20:31:12 +0000 (13:31 -0700)]
ARM: dts: qcom: Replace gpio node with pinctrl node
Now that we have a proper pinctrl driver for the gpio block we
can change the compatible field here and configure the pinmux on
msm8960 devices.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>
Bjorn Andersson [Fri, 5 Jun 2015 22:52:25 +0000 (15:52 -0700)]
ARM: dts: qcom: Replace gpio node with pinctrl node
Replace the standalone gpio driver with pinctrl-msm as we now have
msm8660 support there.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>
Maxime Coquelin [Thu, 23 Jul 2015 05:00:10 +0000 (07:00 +0200)]
ARM: dts: Use stdout-path in STM32F429 Discovery board
This patch replaces use of linux,stdout-path by stdout-path as per
"chosen" DT bindings documentation.
Doing that, the "console" argument is no more needed in kernel command
line.
Reported-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Maxime Coquelin [Sun, 12 Jul 2015 09:27:36 +0000 (11:27 +0200)]
ARM: dts: Add STM32429i-EVAL board support
Main features of STM32429i-EVAL evaluation kit are:
- STM32F429 Cortex-M4 MCU @180MHz
* 2MB internal Flash
* 256KB internal RAM
- 32MB SDRAM
- 16MB NOR Flash
- 2MB SRAM
- 4.3" TFT LCD with resistive touchscreen
- SDCard connector (SDIO compatible)
- 1x USB 2.0 OTG + 1x USB 1.1 OTG
- Ethernet
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Olof Johansson [Wed, 22 Jul 2015 23:25:04 +0000 (16:25 -0700)]
Merge tag 'omap-for-v4.3/dt-pt2' of git://git./linux/kernel/git/tmlind/linux-omap into next/dt
Merge "omap dts changes for v4.3, part2" from Tony Lindgren:
More omap dts changes for v4.3 merge window:
- Add missing devices for pandora. Note that we're adding wl1251
WLAN and LCD backlight support for now using legacy pdata as that
allows us to drop the legacy board file for pandora in another
series of patches
- Enable power button support for omap5-uevm
- Add aliases for am437x UARTs
- Add support for phyCORE phyBOARD-WEGA-AM335x rdk and
phyCORE-AM335x SoM
- Use u16 values for tsc2046 on omap3-lilly
* tag 'omap-for-v4.3/dt-pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: omap3-pandora: add wifi support
ARM: OMAP2+: omap3-pandora: add backlight support
ARM: dts: omap3-pandora: add support for usb host and 32k buffer
ARM: dts: omap3-pandora: miscellaneous corrections
ARM: dts: omap5-uevm: Add Palmas power button support
ARM: dts: am437x: add aliases for all UART instances
ARM: dts: Add phyBOARD-WEGA-AM335x rdk
ARM: dts: Add support for phyCORE-AM335x SoM
ARM: dts: omap3: correct the format of u16 values for tsc2046 node
Signed-off-by: Olof Johansson <olof@lixom.net>
Matthew Gerlach [Mon, 3 Feb 2014 22:22:59 +0000 (14:22 -0800)]
ARM: socfpga: dts: add missing clock gates to socfpga.dtsi
The gates for the clocks coming out of the sdram pll
were missing. The change adds the missing nodes to
the device tree.
Signed-off-by: Matthew Gerlach <mgerlach@opensource.altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Dinh Nguyen [Thu, 29 May 2014 03:40:13 +0000 (22:40 -0500)]
ARM: socfpga: dts: Fix gpio dts entry for the correct clock
The correct clock for the HPS gpio(s) should be the l4_mp_clk.
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Dinh Nguyen [Wed, 20 Nov 2013 15:39:17 +0000 (09:39 -0600)]
ARM: socfpga: dts: Correct the parent clock for l3_sp_clk and dbg_clk
The l3_sp_clk's parent should be the l3_mp_clk. This will account for
the extra divider that is present for the l3_mp_clk.
The dbg_clk's parent should be the dbg_at_clk. This will account for
the extra divider that is present for the dbg_at_clk.
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Fabien Dessenne [Tue, 16 Jun 2015 13:30:00 +0000 (15:30 +0200)]
ARM: DT: STiH410: Add bdisp dt nodes
Add the bdisp (2D blitter for STMicroelectronics SoC) dt nodes for the
first of the two bdisp devices, defining register address, interrupt and
clock.
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
Lee Jones [Tue, 7 Jul 2015 15:06:00 +0000 (17:06 +0200)]
ARM: STi: STiH407: Add PWM Regulator node
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
Lee Jones [Tue, 7 Jul 2015 15:06:00 +0000 (17:06 +0200)]
ARM: STi: STiH407: Move PWM nodes STiH407 => STiH407-family
This also incorporates the STiH410.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
Gabriel Fernandez [Tue, 23 Jun 2015 14:09:00 +0000 (16:09 +0200)]
ARM: STi: DT: Rename st_pll3200c32_407_c0_x into st_pll3200c32_cx_x
Use a generic name for this kind of PLL
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
Peter Griffin [Tue, 9 Jun 2015 13:33:00 +0000 (15:33 +0200)]
ARM: STi: DT: STiH418: Add cpu-release-addr dt property.
To enable SMP when booting via u-boot we need to specify the
newly implemented cpu-release-addr DT property for cores 2 & 3.
Cores 0 & 1 are inherited from stih407-family.dtsi.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
Peter Griffin [Tue, 9 Jun 2015 13:33:00 +0000 (15:33 +0200)]
ARM: STi: DT: STiH407: Add cpu-release-addr dt property.
To enable SMP when booting via u-boot we need to specify the
newly implemented cpu-release-addr DT property.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
Peter Griffin [Wed, 10 Jun 2015 14:04:00 +0000 (16:04 +0200)]
ARM: STi: DT: Add STiH407 family mtsin0 pinctrl configuration
mtsin0 channel can only be configured for parallel data transfer.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
Peter Griffin [Wed, 10 Jun 2015 14:04:00 +0000 (16:04 +0200)]
ARM: STi: DT: Add STiH407 family tsout1 pinctrl configuration
tsout1 channel can only be configured for serial data tranfer.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
Peter Griffin [Wed, 10 Jun 2015 14:04:00 +0000 (16:04 +0200)]
ARM: STi: DT: Add STiH407 family tsout0 pinctrl configuration
tsout0 channel can be configured for either serial or parallel
data transfer. Both pin configurations are provided.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
Peter Griffin [Wed, 10 Jun 2015 14:04:00 +0000 (16:04 +0200)]
ARM: STi: DT: Add STiH407 family tsin5 pinctrl configuration
tsin5 can only be configured for serial data transfer. However
depending on board design, two alternate tsin5 pin configurations
are available, both in pin-controller-front0.
pinctrl_tsin5_serial_alt1 is brought out on B2120 reference
design as TSD on NIMB slot of the B2004A daughter board.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
Peter Griffin [Wed, 10 Jun 2015 14:04:00 +0000 (16:04 +0200)]
ARM: STi: DT: Add STiH407 family tsin4 pinctrl configuration
tsin4 can only be configured for serial data transfer. However
depending on board design, two alternate pin configurations
are available. One in pin-controller-front0 and the other in
pin-controller-front1.
pinctrl_tsin4_serial_alt3 is brought out on B2120 reference
design as TSC on NIMA slot of the B2004A daughter board.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
Peter Griffin [Wed, 10 Jun 2015 14:04:00 +0000 (16:04 +0200)]
ARM: STi: DT: Add STiH407 family tsin3 pinctrl configuration
tsin3 channel can only be configured for serial data transfer.
On B2120 reference design tsin3 is brought out as TSB on the NIMB
slot of the B2004A daughter board.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
Peter Griffin [Wed, 10 Jun 2015 14:04:00 +0000 (16:04 +0200)]
ARM: STi: DT: Add STiH407 family tsin2 pinctrl configuration
tsin2 channel can be configured for either serial or parallel data
transfer. This patch adds the pinctrl config for both possibilities.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
Peter Griffin [Wed, 10 Jun 2015 14:03:00 +0000 (16:03 +0200)]
ARM: STi: DT: Add STiH407 family tsin1 pinctrl configuration
tsin1 channel can be configured for either serial or parallel data
transfer. This patch adds the pinctrl config for both possibilities.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
Peter Griffin [Wed, 10 Jun 2015 14:03:00 +0000 (16:03 +0200)]
ARM: STi: DT: Add STiH407 family tsin0 pinctrl configuration
tsin0 and be configured as either serial or parallel. This patch
adds the pinctrl config for both possiblities. On B2120 reference
design tsin0 is brought out as TSA on the NIMA slot of the B2004A
daughter board.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
Kuninori Morimoto [Tue, 21 Jul 2015 00:27:24 +0000 (00:27 +0000)]
ARM: shmobile: r8a7791: Add Audio MIX support on DTSI
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Tue, 21 Jul 2015 00:27:03 +0000 (00:27 +0000)]
ARM: shmobile: r8a7791: Add Audio CTU support on DTSI
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Tue, 21 Jul 2015 00:26:42 +0000 (00:26 +0000)]
ARM: shmobile: r8a7790: Add Audio MIX support on DTSI
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Tue, 21 Jul 2015 00:26:20 +0000 (00:26 +0000)]
ARM: shmobile: r8a7790: Add Audio CTU support on DTSI
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 6 May 2015 04:05:31 +0000 (07:05 +0300)]
ARM: shmobile: lager: Fix adv7511 IRQ sensing
The adv7511 IRQ is low level triggered, not falling edge triggered. The
wrong sense configuration results in no interrupt being triggered at
all, breaking hotplug detection. Fix it.
Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Olof Johansson [Tue, 21 Jul 2015 21:06:46 +0000 (14:06 -0700)]
Merge tag 'tags/pxa-dt-4.3' of https://github.com/rjarzmik/linux into next/dt
Merge "pxa-dt for v4.3" from Robert Jarzmik:
This device-tree pxa update brings :
- dma nodes after dmaengine pxa_dma driver merge
- camera driver
- usb host controller
* tag 'tags/pxa-dt-4.3' of https://github.com/rjarzmik/linux:
ARM: dts: pxa: fix power i2c definition
ARM: dts: pxa: add the usb host controller
ARM: dts: pxa: add embedded pxa camera capture interface
ARM: dts: pxa: add dma pxamci nodes to pxa3xx
ARM: dts: pxa: add dma engine node to pxa3xx-nand
ARM: dts: pxa: add dma controller
Signed-off-by: Olof Johansson <olof@lixom.net>
Dalon Westergreen [Wed, 8 Jul 2015 23:48:49 +0000 (16:48 -0700)]
ARM: dts: socfpga: Add support of Terasic DE0 Atlas board
The Terasic DE0 Atlas board is also known as the DE0-Nano board.
This patch adds the DTS board file for the DE0-Nano Sockit board, and not
the DE0 Nano "Development Board".
Signed-off-by: Dalon Westergreen <dwesterg@gmail.com>
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
---
v3: Updated skew settings for the gmac1 node as this board is using the
KSZ9031 PHY instead of the 9021 PHY.
v2: use stdpath-out for console and remove comment regarding u-boot ethaddr
Josef Gajdusek [Mon, 20 Jul 2015 20:53:18 +0000 (22:53 +0200)]
ARM: dts: sun4i: Add Iteaduino Plus A10
Iteaduino Plus A10 is a breakout board + Itead Core A10. It features 1GB RAM,
has most of the A10 pins on a .1" header, 2 USB ports, 1 OTG USB port,
Ethernet, HDMI, SATA, Speaker/Microphone 3.5mm jacks and an SD card slot.
Signed-off-by: Josef Gajdusek <atx@atx.name>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Grazvydas Ignotas [Tue, 21 Jul 2015 01:12:01 +0000 (04:12 +0300)]
ARM: OMAP2+: omap3-pandora: add wifi support
Add wl1251 support via pdata-quirks as it's driver lacks DT
support. MMC3 is marked disabled in DT so that MMC3 instance of
hsmmc driver is probed using platform data with special card init
callback.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Grazvydas Ignotas [Tue, 21 Jul 2015 01:12:00 +0000 (04:12 +0300)]
ARM: OMAP2+: omap3-pandora: add backlight support
Add backlight support via pdata-quirks as it's driver lacks DT support.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Grazvydas Ignotas [Tue, 21 Jul 2015 01:11:59 +0000 (04:11 +0300)]
ARM: dts: omap3-pandora: add support for usb host and 32k buffer
This adds missing bits for EHCI HS USB host support and 32k clock
buffer control for the wg7210 bt+wifi module.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Grazvydas Ignotas [Tue, 21 Jul 2015 01:11:58 +0000 (04:11 +0300)]
ARM: dts: omap3-pandora: miscellaneous corrections
- add pandora specific compatible name
- fix mmc2 card detect polarity
- fix mmc1 and mmc2 write protect polarity
- disable write protect pins because of production issue and add an
explanation why they are disabled
- fix NAND partition name to reflect the correct address
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Aparna Balasubramanian [Mon, 20 Jul 2015 21:07:31 +0000 (16:07 -0500)]
ARM: dts: omap5-uevm: Add Palmas power button support
Palmas on OMAP5uevm has support for power button, so enable it.
Signed-off-by: Aparna Balasubramanian <aparnab@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Sekhar Nori [Mon, 20 Jul 2015 11:12:20 +0000 (16:42 +0530)]
ARM: dts: am437x: add aliases for all UART instances
Add serialN aliases for all 6 UART instances on
the AM437x SoC so each board's .dts file does not
have to define its own aliases.
Remove the alias added for am437x-gp-evm.dts now
that we have the aliases defined in am4372.dtsi
file.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / log