ftrace/x86: Adjust x86 regs.ip as like as x86-64

Adjust x86 regs.ip to ip + MCOUNT_INSN_SIZE as like as
on x86-64. This helps us to consolidate codes which use
regs->ip on both of x86/x86-64.

Link: http://lkml.kernel.org/r/20120905143100.10329.60109.stgit@localhost.localdomain
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

trace: Stop compiling in trace_clock unconditionally

Commit 56449f437 "tracing: make the trace clocks available generally",
in April 2009, made trace_clock available unconditionally, since
CONFIG_X86_DS used it too.

Commit faa4602e47 "x86, perf, bts, mm: Delete the never used BTS-ptrace code",
in March 2010, removed CONFIG_X86_DS, and now only CONFIG_RING_BUFFER (split
out from CONFIG_TRACING for general use) has a dependency on trace_clock. So,
only compile in trace_clock with CONFIG_RING_BUFFER or CONFIG_TRACING
enabled.

Link: http://lkml.kernel.org/r/20120903024513.GA19583@leaf
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

tracing: Skip printing "OK" if failed to disable event

No acutal case found. But logically, we should skip "OK" in case any
error met.

Link: http://lkml.kernel.org/r/1346051625-25231-1-git-send-email-yuanhan.liu@linux.intel.com
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

ftrace/x86: Add support for -mfentry to x86_64

If the kernel is compiled with gcc 4.6.0 which supports -mfentry,
then use that instead of mcount.

With mcount, frame pointers are forced with the -pg option and we
get something like:

<can_vma_merge_before>:
       55                      push   %rbp
       48 89 e5                mov    %rsp,%rbp
       53                      push   %rbx
       41 51                   push   %r9
       e8 fe 6a 39 00          callq  ffffffff81483d00 <mcount>
       31 c0                   xor    %eax,%eax
       48 89 fb                mov    %rdi,%rbx
       48 89 d7                mov    %rdx,%rdi
       48 33 73 30             xor    0x30(%rbx),%rsi
       48 f7 c6 ff ff ff f7    test   $0xfffffffff7ffffff,%rsi

With -mfentry, frame pointers are no longer forced and the call looks
like this:

<can_vma_merge_before>:
       e8 33 af 37 00          callq  ffffffff81461b40 <__fentry__>
       53                      push   %rbx
       48 89 fb                mov    %rdi,%rbx
       31 c0                   xor    %eax,%eax
       48 89 d7                mov    %rdx,%rdi
       41 51                   push   %r9
       48 33 73 30             xor    0x30(%rbx),%rsi
       48 f7 c6 ff ff ff f7    test   $0xfffffffff7ffffff,%rsi

This adds the ftrace hook at the beginning of the function before a
frame is set up, and allows the function callbacks to be able to access
parameters. As kprobes now can use function tracing (at least on x86)
this speeds up the kprobe hooks that are at the beginning of the
function.

Link: http://lkml.kernel.org/r/20120807194100.130477900@goodmis.org
Acked-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

ftrace: Do not test frame pointers if -mfentry is used

The function graph has a test to check if the frame pointer is
corrupted, which can happen with various options of gcc with mcount.
But this is not an issue with -mfentry as -mfentry does not need nor use
frame pointers for function graph tracing.

Link: http://lkml.kernel.org/r/20120807194059.773895870@goodmis.org
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

ftrace: Add -mfentry to Makefile on function tracer

Thanks to Andi Kleen, gcc 4.6.0 now supports -mfentry for x86
(and hopefully soon for other archs). What this does is to have
the function profiler start at the beginning of the function
instead of after the stack is set up. As plain -pg (mcount) is
called after the stack is set up, and in some cases can have issues
with the function graph tracer. It also requires frame pointers to
be enabled.

The -mfentry now calls __fentry__ at the beginning of the function.
This allows for compiling without frame pointers and even has the
ability to access parameters if needed.

If the architecture and the compiler both support -mfentry then
use that instead.

Link: http://lkml.kernel.org/r/20120807194059.392617243@goodmis.org
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

ftrace: Make recordmcount.c handle __fentry__

With gcc 4.6.0 the -mfentry feature places the function profiling
call at the start of the function. When this is used, the call is
to __fentry__ and not mcount.

Change recordmcount.c to record both callers to __fentry__ and
mcount.

Link: http://lkml.kernel.org/r/20120807194058.990674363@goodmis.org
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Acked-by: John Reiser <jreiser@bitwagon.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Merge branch 'tip/perf/core-2' of git://git./linux/kernel/git/rostedt/linux-trace into perf/core

Pull ftrace fixlets from Steve Rostedt.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'perf-core-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

 * Fix include order for bison/flex-generated C files, from Ben Hutchings

 * Build fixes and documentation corrections from David Ahern

 * Group parsing support, from Jiri Olsa

 * UI/gtk refactorings and improvements from Namhyung Kim

 * NULL deref fix for perf script, from Namhyung Kim

 * Assorted cleanups from Robert Richter

 * Let O= makes handle relative paths, from Steven Rostedt

 * perf script python fixes, from Feng Tang.

 * Improve 'perf lock' error message when the needed tracepoints
   are not present, from David Ahern.

 * Initial bash completion support, from Frederic Weisbecker

 * Allow building without libelf, from Namhyung Kim.

 * Support DWARF CFI based unwind to have callchains when %bp
   based unwinding is not possible, from Jiri Olsa.

 * Symbol resolution fixes, while fixing support PPC64 files with an .opt ELF
   section was the end goal, several fixes for code that handles all
   architectures and cleanups are included, from Cody Schafer.

 * Add a description for the JIT interface, from Andi Kleen.

 * Assorted fixes for Documentation and build in 32 bit, from Robert Richter

 * Add support for non-tracepoint events in perf script python, from Feng Tang

 * Cache the libtraceevent event_format associated to each evsel early, so that we
   avoid relookups, i.e. calling pevent_find_event repeatedly when processing
   tracepoint events.

   [ This is to reduce the surface contact with libtraceevents and make clear what
     is that the perf tools needs from that lib: so far parsing the common and per
     event fields. ]

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge branch 'tip/perf/core' of git://git./linux/kernel/git/rostedt/linux-trace into perf/core

Pull ftrace updates from Steve Rostedt:

" This patch series extends ftrace function tracing utility to be
  more dynamic for its users. It allows for data passing to the callback
  functions, as well as reading regs as if a breakpoint were to trigger
  at function entry.

  The main goal of this patch series was to allow kprobes to use ftrace
  as an optimized probe point when a probe is placed on an ftrace nop.
  With lots of help from Masami Hiramatsu, and going through lots of
  iterations, we finally came up with a good solution. "

Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf hists: Rename and move some functions

Rename functions for consistency and move callchain print function
into hist_entry__fprintf().

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1345438331-20234-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf hists: Separate out hist print functions

Separate out those functions into ui/stdio/hist.c. This is required for
upcoming changes.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1345438331-20234-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Fix include order for bison/flex-generated C files

When we use a separate output directory, we add util/ to the include
path for the generated C files.  However, this is currently added to the
end of the path, behind /usr/include/slang and /usr/include/gtk-2.0 if
use of the respective libraries is enabled.  Thus the '#include
"../perf.h"' in util/parse-events.l can actually include
/usr/include/perf.h if it exists.

Move '-Iutil/' ahead of all the other preprocessor options.

Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Link: http://lkml.kernel.org/r/1345420039.22400.80.camel@deadeye.wl.decadent.org.uk
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf symbols: Fix builds with NO_LIBELF set

Build currently fails:
  $ make -C tools/perf O=/tmp/pbuild NO_LIBELF=1

  util/symbol.c: In function ‘dso__load’:
  util/symbol.c:1128:27: error: ‘struct symsrc’ has no member named ‘dynsym’
      CC /tmp/pbuild/util/pager.o
  make: *** [/tmp/pbuild/util/symbol.o] Error 1
  make: *** Waiting for unfinished jobs....

Moving the dynsym reference to symbol-elf.c reveals that NO_LIBELF requires
NO_LIBUNWIND:

  $ make -C tools/perf O=/tmp/pbuild NO_LIBELF=1

      LINK /tmp/pbuild/perf
  /tmp/pbuild/libperf.a(unwind.o): In function `elf_section_offset':
  /opt/sw/ahern/perf.git/tools/perf/util/unwind.c:176: undefined reference to `elf_begin'
  /opt/sw/ahern/perf.git/tools/perf/util/unwind.c:181: undefined reference to `gelf_getehdr'
  /tmp/pbuild/libperf.a(unwind.o): In function `elf_section_by_name':
  /opt/sw/ahern/perf.git/tools/perf/util/unwind.c:157: undefined reference to `elf_nextscn'
  /opt/sw/ahern/perf.git/tools/perf/util/unwind.c:160: undefined reference to `gelf_getshdr'
  /opt/sw/ahern/perf.git/tools/perf/util/unwind.c:161: undefined reference to `elf_strptr'
  /tmp/pbuild/libperf.a(unwind.o): In function `elf_section_offset':
  /opt/sw/ahern/perf.git/tools/perf/util/unwind.c:190: undefined reference to `elf_end'
  /tmp/pbuild/libperf.a(unwind.o): In function `read_unwind_spec':
  /opt/sw/ahern/perf.git/tools/perf/util/unwind.c:190: undefined reference to `elf_end'
  collect2: ld returned 1 exit status
  make: *** [/tmp/pbuild/perf] Error 1
  make: Leaving directory `/opt/sw/ahern/perf.git/tools/perf'

This patch fixes both.

Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1345391234-71906-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf: silence GTK2 probing errors

If GTK2 development packages are not installed, make is rather noisy:

  $ make -C tools/perf O=/tmp/pbuild
  Package gtk+-2.0 was not found in the pkg-config search path.
  Perhaps you should add the directory containing `gtk+-2.0.pc'
  to the PKG_CONFIG_PATH environment variable
  No package 'gtk+-2.0' found
  make: Entering directory `/opt/sw/ahern/perf.git/tools/perf'
  Makefile:593: GTK2 not found, disables GTK2 support. Please install gtk2-devel or libgtk2.0-dev
  PERF_VERSION = 3.6.rc1.205.gdb146f.dirty
  make: Leaving directory `/opt/sw/ahern/perf.git/tools/perf'
  Package gtk+-2.0 was not found in the pkg-config search path.
  Perhaps you should add the directory containing `gtk+-2.0.pc'
  to the PKG_CONFIG_PATH environment variable
  No package 'gtk+-2.0' found
  make: Entering directory `/opt/sw/ahern/perf.git/tools/perf'
  Makefile:593: GTK2 not found, disables GTK2 support. Please install gtk2-devel or libgtk2.0-dev
  ...

Silence the pkg-config errors. Aftewards:

  $ make -C tools/perf O=/tmp/pbuild
  make: Entering directory `/opt/sw/ahern/perf.git/tools/perf'
  Makefile:593: GTK2 not found, disables GTK2 support. Please install gtk2-devel or libgtk2.0-dev
  PERF_VERSION = 3.6.rc1.206.gd43ff9.dirty
  make: Leaving directory `/opt/sw/ahern/perf.git/tools/perf'
  make: Entering directory `/opt/sw/ahern/perf.git/tools/perf'
  Makefile:593: GTK2 not found, disables GTK2 support. Please install gtk2-devel or libgtk2.0-dev
  ...

Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Link: http://lkml.kernel.org/r/1345391202-71865-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf script perl/python: Fix libexec scripts path in Documentation

The libexec path is /libexec/perf-core/scripts/*/Perf-Trace-Util.

Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1345391182-71825-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf ui gtk: Ensure not to call gtk_main_quit() twice

Currently the gtk_main_quit() is called twice when perf exits so the
following warning is emitted:

  [penberg@tux perf]$ ./perf report --gtk
  ^Cperf: Interrupt

  (perf:4048): Gtk-CRITICAL **: IA__gtk_main_quit: assertion `main_loops != NULL' failed

Fix it by not to call it unnecessarily.

Reported-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1345222583-3964-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Rename global variable 'events' in util/header.c

Trivial patch that renames global variable 'events' in util/header.c.

Use a more specific naming to avoid conflicts. Same for variable
'event_count'.

Signed-off-by: Robert Richter <robert.richter@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1345144224-27280-5-git-send-email-robert.richter@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Rename some variables for better understanding

Trivial patch to improve understanding of code.

Varible attr is usually used for struct perf_event_attr. Using it in a
different context is irritating. Thus, renaming it.

Signed-off-by: Robert Richter <robert.richter@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1345144224-27280-4-git-send-email-robert.richter@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Report number of pmu type of unknown events

If detection fails and an event name is unknown, report the type number.
Example perf header output:

 # Samples: 10K of event 'unknown attr type: 7'

Signed-off-by: Robert Richter <robert.richter@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1345144224-27280-3-git-send-email-robert.richter@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Fix type for evsel->ids and add size check for ids

Use same type for ids everywhere.

In case of writing to perf.data the size is u32. In pipe mode it is
limited to header.size (less than u16). Adding a size check here.

Size overflow due to casting shouldn't actually happen in practice, but
during development this may cause type missmatch warninngs/errors,
unifying types avoids this.

Signed-off-by: Robert Richter <robert.richter@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1345144224-27280-2-git-send-email-robert.richter@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf ui gtk: Add perf_gtk__show_helpline() for pr_*

Use helpline for printing error/debug messages. The code resembles a TUI
counter part and only print the first line of the message.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1345104894-14205-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf ui/gtk: Use helpline API in browser

As we now have a helpline implementation, use it for displaying help
messages.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1345104894-14205-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf ui gtk: Implement helpline_fns

Add helpline API implementation to GTK front-end.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1345104894-14205-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf ui: Introduce struct ui_helpline

Add struct ui_helpline in order to provide flexible implementation of
helpline APIs.  And convert existing TUI implementation to use it.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1345104894-14205-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Let O= makes handle relative paths

When I did a compile of perf using a relative path for the output
directory, the build failed when it tried to compile libtraceevent. This
is because it continues to use the same relative path when the new
working directory is in a different path.

    SUBDIR ../lib/traceevent/
/bin/sh: line 0: cd: ../../../nobackup/perf/: No such file or directory
Makefile:74: *** output directory "../../../nobackup/perf/" does not exist.  Stop.
make: *** [../../../nobackup/perf///libtraceevent.a] Error 2

Make the path used an absolute path when building perf with O=.

Boris:

Teach Makefile to check whether the supplied O= directory exists and
bail out if not. Reportedly, kernel dudes are idiots and need to be
guarded so as not to shoot themselves in the foot when playing in the
sandbox.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120815163923.GD15989@aftab.osrc.amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf evlist: Introduce evsel list accessors

To replace the longer list_entry constructs for things that are widely
used:

perf_evlist__{first,last}(evlist)
perf_evsel__next(evsel)

Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ng7azq26wg1jd801qqpcozwp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf evlist: Rename __group method to __set_leader

Just like was done for parse_events__set_leader.

Also we need to have the list_entry set_leader method in evlist.c so that we
don't grow another dep in the python binding:

 # ~acme/git/linux/tools/perf/python/twatch.py
 Traceback (most recent call last):
   File "/home/acme/git/linux/tools/perf/python/twatch.py", line 16, in <module>
     import perf
 ImportError: /home/acme/git/build/perf/python/perf.so: undefined symbol: parse_events__set_leader

And also remove a pr_debug from evsel.c so that we avoid this one too:

 # ~acme/git/linux/tools/perf/python/twatch.py
 Traceback (most recent call last):
   File "/home/acme/git/linux/tools/perf/python/twatch.py", line 16, in <module>
     import perf
 ImportError: /home/acme/git/build/perf/python/perf.so: undefined symbol: eprintf

Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-0hk9dazg9pora9jylkqngovm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf test: Add automated tests for event group parsing

Adding 5 more tests for new event group syntax. Tests are executed
within the 'perf test parse' test suite.

Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/n/tip-dmhsv8mpoksx2wp97balqiem@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Enable grouping logic for parsed events

This patch adds a functionality that allows to create event groups
based on the way they are specified on the command line. Adding
functionality to the '{}' group syntax introduced in earlier patch.

The current '--group/-g' option behaviour remains intact. If you
specify it for record/stat/top command, all the specified events
become members of a single group with the first event as a group
leader.

With the new '{}' group syntax you can create group like:
  # perf record -e '{cycles,faults}' ls

resulting in single event group containing 'cycles' and 'faults'
events, with cycles event as group leader.

All groups are created with regards to threads and cpus. Thus
recording an event group within a 2 threads on server with
4 CPUs will create 8 separate groups.

Examples (first event in brackets is group leader):

  # 1 group (cpu-clock,task-clock)
  perf record --group -e cpu-clock,task-clock ls
  perf record -e '{cpu-clock,task-clock}' ls

  # 2 groups (cpu-clock,task-clock) (minor-faults,major-faults)
  perf record -e '{cpu-clock,task-clock},{minor-faults,major-faults}' ls

  # 1 group (cpu-clock,task-clock,minor-faults,major-faults)
  perf record --group -e cpu-clock,task-clock -e minor-faults,major-faults ls
  perf record -e '{cpu-clock,task-clock,minor-faults,major-faults}' ls

  # 2 groups (cpu-clock,task-clock) (minor-faults,major-faults)
  perf record -e '{cpu-clock,task-clock} -e '{minor-faults,major-faults}' \
   -e instructions ls

  # 1 group
  # (cpu-clock,task-clock,minor-faults,major-faults,instructions)
  perf record --group -e cpu-clock,task-clock \
   -e minor-faults,major-faults -e instructions ls perf record -e
'{cpu-clock,task-clock,minor-faults,major-faults,instructions}' ls

It's possible to use standard event modifier for a group, which spans
over all events in the group and updates each event modifier settings,
for example:

  # perf record -r '{faults:k,cache-references}:p'

resulting in ':kp' modifier being used for 'faults' and ':p' modifier
being used for 'cache-references' event.

Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/n/tip-ho42u0wcr8mn1otkalqi13qp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Add support to update event modifier

Adding support to update already defined event's attribute with
event modifier. This change will allow to use group modifier as
an update to the existing event modifiers.

Adding 'add' parameter to the parse_events__modifier_event function.
Calling it with 'add' = false/true, the event modifier is
initialized/updated respectively.

Added exclude_GH flag to evsel struct, because we need to remember
if one of 'GH' modifiers was used for event. The reason is that the
default settings for exclude_guest is 1 and during the group
modifier processing we have no other way of knowing if it was set
by default or by event modifier.

Keeping the current behaviour, that any event/group modifier reset
the defaults for exclude_host (0) and exclude_guest (1).

Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/n/tip-8peaey3e2qc9dwtkvzbi4wmx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Add support to parse event group syntax

Adding scanner/parser bits to parse event groups.

The grammar for group is:
  groups:      groups ',' group | group
  group:       group_name '{' events '}' group_mod
  group_name:  name | empty
  group_mod:   ':' group_mods | empty
  group_mods:  event_mod

It's possible to use standard event modifier as a modifier
for group. It'll be used as an update to existing event
modifiers.

It's necessary to use quoting ("'\) when specifying group on
command line, since {} characters are interpreted by most of
the shells.

It is now possible to specify groups in event syntax like:

  '{cycles,faults}'
   - anonymous group

  'group1{cycles,faults}
   - group with name 'group1'

  '{cycles,faults}:k
   - anonymous group with event modifier 'k'

  '{cpu-clock,task-clock},{minor-faults,major-faults}'
   - two anonymous groups

The grouping functionality itself is coming shortly.

Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/n/tip-p4j8bnvo879uokum4k4zk5q6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Add missing files to build the python binding

Changeset 0f6a3015:
"perf tools: Support user regs and stack in sample parsing"

uses hweight_long in evsel.c, so we need to drag util/hweight.c
to the python binding.

Ditto for ee8dd3c:
"perf tools: Change strlist to use the new rblist"

where we need to add util/rblist.c.

Now twatch.py works again:

 # export PYTHONPATH=~acme/git/build/perf/python/
 # ~acme/git/linux/tools/perf/python/twatch.py
 cpu:  4, pid: 23639, tid: 23639 { type: fork, pid: 30659, ppid: 23639, tid: 30659, ptid: 23639, time: 36287872076780}
 cpu:  5, pid: 30659, tid: 30659 { type: comm, pid: 30659, tid: 30659, comm: ls }
 cpu:  5, pid: 30659, tid: 30659 { type: exit, pid: 30659, ppid: 30659, tid: 30659, ptid: 30659, time: 36287873681539}
 cpu:  4, pid: 23639, tid: 23639 { type: fork, pid: 30660, ppid: 23639, tid: 30660, ptid: 23639, time: 36291720420480}
 cpu:  5, pid: 30659, tid: 30659 { type: exit, pid: 30659, ppid: 30659, tid: 30659, ptid: 30659, time: 36287873685714}
 cpu:  5, pid: 30660, tid: 30660 { type: comm, pid: 30660, tid: 30660, comm: git }
 ^C
 KeyboardInterrupt

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-gmq82zp5blin9aml9g5tzokr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf script: Fix a NULL pointer dereference

If 'perf script --gen-script' was called with a perf.data which contains
no tracepoint event, it'd segfault due to NULL pevent pointer. Fix it.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1344909423-26384-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf symbols: Add description of JIT interface

Add a description of the JIT interface in the perf symbol resolution
code. I reverse engineered the format from the source.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Link: http://lkml.kernel.org/r/1344526260-18721-1-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf symbols: Use both runtime and debug images

We keep both a 'runtime' elf image as well as a 'debug' elf image around
and generate symbols by looking at both of these.

This eliminates the need for the want_symtab/goto restart mechanism
combined with iterating over and reopening the elf images a second time.

Also give dso__synthsize_plt_symbols() the runtime image (which has
dynsyms) instead of the symbol image (which may only have a symtab and
no dynsyms).

Previously if a debug image was found all runtime images were ignored.

This fixes 2 issues:

 - Symbol resolution to failure on PowerPC systems with debug symbols
   installed, as the debug images lack a '.opd' section which contains
   function descriptors.

 - On all archs, plt synthesis failed when a debug image was loaded and
   that debug image lacks a dynsym section while a runtime image has a
   dynsym section.

Assumptions:

 - If a .opd section exists, it is contained in the highest priority
   image with a dynsym section.

 - This generally implies that the debug image lacks a dynsym section
   (ie: it is marked as NO_BITS).

Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: David Hansen <dave@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matt Hellsley <matthltc@us.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1344637382-22789-17-git-send-email-cody@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf symbols: Convert dso__load_syms to take 2 symsrc's

To properly handle platforms with an opd section, both a runtime image
(which contains the opd section but possibly lacks symbols) and a symbol
image (which probably lacks an opd section but has symbols).

The next patch ("perf symbol: use both runtime and debug images")
adjusts the callsite in dso__load() to take advantage of being able to
pass both runtime & debug images.

Assumptions made here:

 - The opd section, if it exists in the runtime image, has headers in
   both the runtime image and the debug/syms image.

 - The index of the opd section (again, only if it exists in the runtime
   image) is the same in both the runtime and debug/symbols image.

Both of these are true on RHEL, but it is unclear how accurate they are
in general (on platforms with function descriptors in opd sections).

Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: David Hansen <dave@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matt Hellsley <matthltc@us.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1344637382-22789-16-git-send-email-cody@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf symbols: Factor want_symtab out of dso__load_sym()

Only one callsite of dso__load_sym() uses the want_symtab functionality,
so place the logic at the callsite instead of within dso__load_sym().

This sets us up for removal of want_symtab completely once we keep
multiple elf handles (within symsrc's) around.

Setup for the later patch

"perf symbols: Use both runtime and debug images"

Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: David Hansen <dave@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matt Hellsley <matthltc@us.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1344637382-22789-15-git-send-email-cody@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf symbols: Switch dso__synthesize_plt_symbols() to use symsrc

Previously dso__synthesize_plt_symbols() was reopening the elf file to
obtain dynsyms from it. Rather than reopen the file, use the already
opened reference within the symsrc to access it.

Setup for the later patch

"perf symbols: Use both runtime and debug images"

Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: David Hansen <dave@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matt Hellsley <matthltc@us.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1344637382-22789-14-git-send-email-cody@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf symbols: Set symtab_type in dso__load_sym

In certain cases, dso__load requires dso->symbol_type to be set prior to
calling it. With the introduction of symsrc*, the symtab_type is now
stored in a symsrc which is then passed to dso__load_sym().

Change dso__load_sym() to use the symtab_type from them symsrc (setting
dso->symtab_type as well).

Setup for later patch

"perf symbols: Use both runtime and debug images"

Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: David Hansen <dave@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matt Hellsley <matthltc@us.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1344637382-22789-13-git-send-email-cody@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf symbols: Introduce symsrc structure.

Factors opening of certain sections & tracking certain elf info into an
external structure.

The goal here is to keep multiple elfs (and their looked up
sections/indexes) around during the symbol generation process (in
dso__load()).

We need this to properly resolve symbols on PPC due to the use of
function descriptors & the .opd section (ie: symbols which are functions
don't point to their actual location, they point to their function
descriptor in .opd which contains their actual location.

It would be possible to just keep the (Elf *) around, but then we'd end
up with duplicate code for looking up the same sections and checking for
the existence of an important section wouldn't be as clean (and we need
to keep the Elf stuff confined to symtab-elf.c).

Utilized by the later patch
"perf symbols: Use both runtime and debug images"

Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: David Hansen <dave@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matt Hellsley <matthltc@us.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1344637382-22789-12-git-send-email-cody@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf symbols: Track symtab_type of vmlinux

Previously, symtab_type would have been left at 0, or KALLSYMS, which is
not quite accurate.

Introduce DSO_BINARY_TYPE__VMLINUX[_GUEST].

Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: David Hansen <dave@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matt Hellsley <matthltc@us.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1344637382-22789-11-git-send-email-cody@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf symbols: Avoid segfault in elf_strptr

If we call elf_section_by_name() with a truncated elf image (ie: the
file header indicates that the section headers are placed past the end
of the file), elf_strptr() causes a segfault within libelf.

Avoid this by checking that we can access the section string table
properly.

Should really be fixed in libelf/elfutils.

Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: David Hansen <dave@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matt Hellsley <matthltc@us.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1344637382-22789-10-git-send-email-cody@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf symbols: only set vmlinux longname & mark loaded if really loaded

dso__load_vmlinux() uses the filename passed to it to directly set the
dso long_name, which resulted in a use after free due to
dso__load_vmlinux_path() treating 0 symbols as a load failure and
subsequently freeing the contents of dso->long_name.

Change dso__load_vmlinux() so that finding 0 symbols does not cause it
to consider itself loaded, and do not set long_name in such a case.

Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: David Hansen <dave@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matt Hellsley <matthltc@us.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1344637382-22789-9-git-send-email-cody@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf symbols: Simplify out_fixup in kernel syms loading

The only site that jumps to out_fixup has (kallsyms_filename == NULL).
And all paths that reach 'if (err > 0)' without 'goto out_fixup' have
kallsyms_filename != NULL.

So skip over both the check & dso__set_long_name(), and remove the
check.

Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: David Hansen <dave@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matt Hellsley <matthltc@us.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1344637382-22789-8-git-send-email-cody@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf symbols: Remove unused 'end' arg in kallsyms parse cb

kallsyms__parse() takes a callback that is called on every discovered
symbol. As /proc/kallsyms does not supply symbol sizes, the callback was
simply called with end=start, faking the symbol size to 1.

All of the callbacks (there are 2) used in calls to kallsyms__parse()
are _only_ used as callbacks for kallsyms__parse().

Given that kallsyms__parse() lacks real information about what
end/length should be, don't make up a length in kallsyms__parse().
Instead have the callbacks handle guessing the length.

Also relocate a comment regarding symbol creation to the callback which
does symbol creation (kallsyms__parse() is not in general used to create
symbols).

Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: David Hansen <dave@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matt Hellsley <matthltc@us.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1344637382-22789-3-git-send-email-cody@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf symbols: Correct comment wrt kallsyms loading

In kallsyms_parse() when calling process_symbol() (a callback argument
to kallsyms_parse()), we pass start as both start & end (ie:
start=start, end=start).

In map__process_kallsym_symbol(), the length is calculated as 'end -
start + 1', making the length 1, not 0.

Essentially, start & end define an inclusive range.

Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: David Hansen <dave@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matt Hellsley <matthltc@us.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1344637382-22789-2-git-send-email-cody@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf symbols: Remove unneeded call to dso__set_long_name()

dso__set_long_name() is already called by dso__load_vmlinux(), avoid
calling it a second time unnecessarily.

Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: David Hansen <dave@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matt Hellsley <matthltc@us.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1344637382-22789-7-git-send-email-cody@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf symbols: Don't try to synthesize plt without dynstr

If .dynsym exists but .dynstr is empty (NO_BITS or size==0), a segfault
occurs.  Avoid this by checking that .dynstr is not empty.

Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: David Hansen <dave@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matt Hellsley <matthltc@us.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1344637382-22789-6-git-send-email-cody@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf symbols: Remove unused function map__objdump_2ip

map__objdump_2ip was introduced in:

ee11b90b12 perf top: Fix annotate for userspace

And it's last user removed in:

36532461a0 perf top: Ditch private annotation code, share perf annotate's

Remove it.

Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: David Hansen <dave@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matt Hellsley <matthltc@us.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1344637382-22789-5-git-send-email-cody@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf symbols: Only un-prelink non-zero symbols

Prelink only adjusts the addresses of non-zero symbols. Do the same when we
reverse the adjustments.

Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: David Hansen <dave@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matt Hellsley <matthltc@us.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1344637382-22789-4-git-send-email-cody@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Support for DWARF mode callchain

This patch enables perf to use the DWARF unwind code.

It extends the perf record '-g' option with following arguments:
  'fp'           - provides framepointer based user
                   stack backtrace
  'dwarf[,size]' - provides DWARF (libunwind) based user stack
                   backtrace. The size specifies the size of the
                   user stack dump. If omitted it is 8192 by default.

If libunwind is found during the perf build, then the 'dwarf' argument
becomes available for record command. The 'fp' stays as default option
in any case.

Examples: (perf compiled with libunwind)

   perf record -g dwarf ls
      - provides dwarf unwind with 8192 as stack dump size

   perf record -g dwarf,4096 ls
      - provides dwarf unwind with 4096 as stack dump size

   perf record -g -- ls
   perf record -g fp ls
      - provides frame pointer unwind

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Original-patch-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Benjamin Redelings <benjamin.redelings@nescent.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/1344345647-11536-13-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Support for DWARF CFI unwinding on post processing

This brings the support for DWARF cfi unwinding on perf post
processing. Call frame informations are retrieved and then passed
to libunwind that requests memory and register content from the
applications.

Adding unwind object to handle the user stack backtrace based
on the user register values and user stack dump.

The unwind object access the libunwind via remote interface
and provides to it all the necessary data to unwind the stack.

The unwind interface provides following function:
unwind__get_entries

And callback (specified in above function) to retrieve
the backtrace entries:
typedef int (*unwind_entry_cb_t)(struct unwind_entry *entry,
 void *arg);

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Original-patch-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Benjamin Redelings <benjamin.redelings@nescent.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/1344345647-11536-12-git-send-email-jolsa@redhat.com
[ Replaced use of perf_session by usage of perf_evsel ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Support user regs and stack in sample parsing

Adding following info to be parsed out of the event sample:
 - user register set
 - user stack dump

Both are global and specific to all events within the session.
This info will be used in the unwind patches coming in shortly.

Adding simple output printout (report -D) for both register and
stack dumps.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Original-patch-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Benjamin Redelings <benjamin.redelings@nescent.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/1344345647-11536-11-git-send-email-jolsa@redhat.com
[ Use evsel->attr.sample_regs_user ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Add libunwind dependency for DWARF CFI unwinding

Adding libunwind to be linked with perf if available. It's required
for the to get dwarf cfi unwinding support.

Also building perf with the dwarf call frame informations by default,
so that we can unwind callchains in perf itself.

Adding LIBUNWIND_DIR Makefile variable allowing user to specify
the directory with libunwind to be linked. This is used for
debug purposes.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Original-patch-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Benjamin Redelings <benjamin.redelings@nescent.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/1344345647-11536-10-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Add interface to arch registers sets

Adding header files to access unified API for arch registers.

  util/perf_regs.h - global perf_reg declarations
  arch/x86/include/perf_regs.h - x86 arch specific

Adding perf_reg_name function to obtain register name based on the reg
ID value, and PERF_REGS_MASK macro with mask definition of all current
arch registers (will be used in unwind patches).

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Benjamin Redelings <benjamin.redelings@nescent.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/1344345647-11536-9-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Adding PERF_ATTR_SIZE_VER2 to the header swap check

Updating attr_file_abi_sizes array with PERF_ATTR_SIZE_VER2 version, so
we have the swap check complete.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Benjamin Redelings <benjamin.redelings@nescent.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/1344345647-11536-8-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf: Add attribute to filter out callchains

Introducing following bits to the the perf_event_attr struct:

  - exclude_callchain_kernel to filter out kernel callchain
    from the sample dump

  - exclude_callchain_user to filter out user callchain
    from the sample dump

We need to be able to disable standard user callchain dump when we use
the dwarf cfi callchain mode, because frame pointer based user
callchains are useless in this mode.

Implementing also exclude_callchain_kernel to have complete set of
options.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
[ Added kernel callchains filtering ]
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Benjamin Redelings <benjamin.redelings@nescent.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/1344345647-11536-7-git-send-email-jolsa@redhat.com
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf: Add ability to attach user stack dump to sample

Introducing PERF_SAMPLE_STACK_USER sample type bit to trigger the dump
of the user level stack on sample. The size of the dump is specified by
sample_stack_user value.

Being able to dump parts of the user stack, starting from the stack
pointer, will be useful to make a post mortem dwarf CFI based stack
unwinding.

Added HAVE_PERF_USER_STACK_DUMP config option to determine if the
architecture provides user stack dump on perf event samples.  This needs
access to the user stack pointer which is not unified across
architectures. Enabling this for x86 architecture.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Original-patch-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Benjamin Redelings <benjamin.redelings@nescent.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/1344345647-11536-6-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf: Add perf_output_skip function to skip bytes in sample

Introducing perf_output_skip function to be able to skip data within the
perf ring buffer.

When writing data into perf ring buffer we first reserve needed place in
ring buffer and then copy the actual data.

There's a possibility we won't be able to fill all the reserved size
with data, so we need a way to skip the remaining bytes.

This is going to be useful when storing the user stack dump, where we
might end up with less data than we originally requested.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Benjamin Redelings <benjamin.redelings@nescent.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/1344345647-11536-5-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf: Factor __output_copy to be usable with specific copy function

Adding a generic way to use __output_copy function with specific copy
function via DEFINE_PERF_OUTPUT_COPY macro.

Using this to add new __output_copy_user function, that provides output
copy from user pointers. For x86 the copy_from_user_nmi function is used
and __copy_from_user_inatomic for the rest of the architectures.

This new function will be used in user stack dump on sample, coming in
next patches.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Benjamin Redelings <benjamin.redelings@nescent.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/1344345647-11536-4-git-send-email-jolsa@redhat.com
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf: Add ability to attach user level registers dump to sample

Introducing PERF_SAMPLE_REGS_USER sample type bit to trigger the dump of
user level registers on sample. Registers we want to dump are specified
by sample_regs_user bitmask.

Only user level registers are dumped at the moment. Meaning the register
values of the user space context as it was before the user entered the
kernel for whatever reason (syscall, irq, exception, or a PMI happening
in userspace).

The layout of the sample_regs_user bitmap is described in
asm/perf_regs.h for archs that support register dump.

This is going to be useful to bring Dwarf CFI based stack unwinding on
top of samples.

Original-patch-by: Frederic Weisbecker <fweisbec@gmail.com>
[ Dump registers ABI specification. ]
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Suggested-by: Stephane Eranian <eranian@google.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Benjamin Redelings <benjamin.redelings@nescent.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/1344345647-11536-3-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf: Unified API to record selective sets of arch registers

This brings a new API to help the selective dump of registers on event
sampling, and its implementation for x86 arch.

Added HAVE_PERF_REGS config option to determine if the architecture
provides perf registers ABI.

The information about desired registers will be passed in u64 mask.
It's up to the architecture to map the registers into the mask bits.

For the x86 arch implementation, both 32 and 64 bit registers bits are
defined within single enum to ensure 64 bit system can provide register
dump for compat task if needed in the future.

Original-patch-by: Frederic Weisbecker <fweisbec@gmail.com>
[ Added missing linux/errno.h include ]
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Benjamin Redelings <benjamin.redelings@nescent.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/1344345647-11536-2-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf symbols: Implement poor man's ELF parser

Implement a minimal elf parser for getting build-id.  It assumes that
required elf.h header is provided by libc header on the system and the
parser only looks for PT_NOTE program header to check build-id.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1344228082-15569-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf symbols: Support minimal build without libelf

Now we have isolated all ELF-specific stuff, it's possible to build
without libelf. The output binary can do most of jobs but lacks (user
level) symbol information - kernel symbols are still accessable thanks
to the kallsyms.

To build perf without libelf (elfutils), give NO_LIBELF=1 to make.

For now, only 'perf probe' command is removed since it depends on
libelf/libdw heavily.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1344228082-15569-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf symbols: Split out util/symbol-elf.c

Factor out the dependency of ELF handling into separate symbol-elf.c
file. It is a preparation of building a minimalistic version perf tools
which doesn't depend on the elfutils.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1344228082-15569-3-git-send-email-namhyung@kernel.org
[ committer note: removed blank line at symbol-elf.c EOF ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf symbols: Introduce symbol__elf_init()

The symbol__elf_init() is for initializing internal libelf data
structure and getting rid of its dependency outside of ELF/symboling
handling code.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1344228082-15569-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Fix /etc config related installation

Fix missing /etc/bash_completion.d directory creation, otherwise
the installation fails miserably on systems that don't have bash
completion installed yet or on specific target:

   $ make DESTDIR=/tmp/junk-perf O=/tmp/pbuild -C tools/perf/ install
   ...
   install -m 755 bash_completion /tmp/junk-perf/etc/bash_completion.d/perf
   install: cannot create regular file
   `/tmp/junk-perf/etc/bash_completion.d/perf': No such file or directory
   make: *** [install] Error 1
   make: Leaving directory `/opt/sw/ahern/perf.git/tools/perf'

Also use sysconfdir variable instead of the hardcoded /etc to handle
overriden conf directory.

Reported-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1344522713-27951-4-git-send-email-fweisbec@gmail.com
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Support for events bash completion

Add basic bash completion for the -e option in record, top and stat
subcommands. Only hardware, software and tracepoint events are
supported.

Breakpoints, raw events and events grouping completion need more
thinking.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1344522713-27951-3-git-send-email-fweisbec@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Initial bash completion support

This implements bash completion for perf subcommands such as record,
report, script, probe, etc...

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1344522713-27951-2-git-send-email-fweisbec@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf lock record: improve message when tracepoints are not enabled

If CONFIG options required for perf-lock are not enabled then the
corresponding tracepoints will not be enabled. Currently, the message to
the user is:
  $ perf lock record -a -- sleep 1
  invalid or unsupported event: 'lock:lock_acquire'
  Run 'perf list' for a list of valid events

Improve the message with a suggestion on which CONFIG options are needed:
  $ perf lock record -a -- sleep 1
  tracepoint lock:lock_acquire is not enabled. Are CONFIG_LOCKDEP and CONFIG_LOCK_STAT enabled?

Suggested-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1344530137-25521-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf script python: Correct handler check and spelling errors

Correct the checking for handler returned by PyDict_GetItemString(),
also fix some spelling error and remove some data code in
event_analyzing_sample.py, as suggested by Namhyung Kim.

v2: restore back the wrongly removed trace_unhandled() func

Signed-off-by: Feng Tang <feng.tang@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20120809134613.067104c4@feng-i7
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf scripts python: Add event_analyzing_sample.py as a sample for general event handling

Currently only trace point events are supported in perf/python script,
the first 3 patches of this serie add the support for all types of
events. This script is just a simple sample to show how to gather the
basic information of the events and analyze them.

This script will create one object for each event sample and insert them
into a table in a database, then leverage the simple SQL commands to
sort/group them. User can modify or write their brand new functions
according to their specific requirment.

Here is the sample of how to use the script:

 $ perf record -a tree
 $ perf script -s process_event.py

There is 100 records in gen_events table
Statistics about the general events grouped by thread/symbol/dso:

            comm   number         histgram
==========================================
         swapper       56     ######
            tree       20     #####
            perf       10     ####
            sshd        8     ####
     kworker/7:2        4     ###
     ksoftirqd/7        1     #
 plugin-containe        1     #

                          symbol   number         histgram
==========================================================
           native_write_msr_safe       40     ######
                  __lock_acquire        8     ####
             ftrace_graph_caller        4     ###
           prepare_ftrace_return        4     ###
                      intel_idle        3     ##
              native_sched_clock        3     ##
                  Unknown_symbol        2     ##
                      do_softirq        2     ##
                    lock_release        2     ##
           lock_release_holdtime        2     ##
               trace_graph_entry        2     ##
                        _IO_putc        1     #
                  __d_lookup_rcu        1     #
                      __do_fault        1     #
                      __schedule        1     #
                  _raw_spin_lock        1     #
                       delay_tsc        1     #
             generic_exec_single        1     #
                generic_fillattr        1     #

                                     dso   number         histgram
==================================================================
                       [kernel.kallsyms]       95     #######
                     /lib/libc-2.12.1.so        5     ###

Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1344419875-21665-6-git-send-email-feng.tang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf scripts python: Add a python library EventClass.py

This library defines several class types for perf events which could
help to better analyze the event samples. Currently there are just a few
classes, PerfEvent is the base class for all perf events,  PebsEvent is
a HW base Intel x86 PEBS event, and user could add more SW/HW event
classes based on requriements.

Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1344419875-21665-5-git-send-email-feng.tang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf scripts python: Pass event/thread/dso name and symbol info to event handler in python

Also as suggested by Arnaldo, pack all these parameters to a dictionary,
which is more expandable for adding new parameters while keeping the
compatibility for old scripts.

Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1344419875-21665-4-git-send-email-feng.tang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf script: Replace "struct thread" with "struct addr_location" as a parameter for "process_event()"

Both perl and python script start processing events other than trace
points, and it's useful to pass the resolved symbol and the dso info to
the event handler in script for better analysis and statistics.

Struct thread is already a member of struct addr_location, using
addr_location will keep the thread info, while providing additional
symbol and dso info if exist, so that the script itself doesn't need to
bother to do the symbol resolving and dso searching work.

Tested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1344419875-21665-3-git-send-email-feng.tang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf script: Add general python handler to process non-tracepoint events

This patch just follows Robert Richter's idea and the commit 37a058ea0
"perf script: Add generic perl handler to process events"
to similarly add a python handler for general events other than tracepoints.

For non-tracepoint events, this patch will try to find a function named
"process_event" in the python script, and pass the event attribute,
perf_sample, raw_data in format of raw string. And the python script can
use "struct" module's unpack function to disasemble the needed info and process.

Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1344419875-21665-2-git-send-email-feng.tang@intel.com
[ committer note: Fixed up wrt da37896, i.e. pevent parm in script event handlers ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf list: Document precise event sampling for AMD IBS

Updating man perf-list.

Signed-off-by: Robert Richter <robert.richter@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1344361396-7237-7-git-send-email-robert.richter@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf list: Update documentation about raw event setup

It was missing that only certain bit fields are passed to the config
value which confused users. Updating it.

Signed-off-by: Robert Richter <robert.richter@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1344361396-7237-6-git-send-email-robert.richter@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools lib traceevent: Fix cast from pointer to integer for 32 bit

Fixing the integer cast reported by the following warning:

 tools/lib/traceevent/event-parse.c:3488:14: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]

Signed-off-by: Robert Richter <robert.richter@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1344361396-7237-5-git-send-email-robert.richter@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Fix parsing of 64 bit raw config value for 32 bit

perf record fails on 32 bit with:

 invalid or unsupported event: 'r40000F7E0'

Fixing this by parsing 64 bit num values.

Signed-off-by: Robert Richter <robert.richter@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1344361396-7237-4-git-send-email-robert.richter@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Fix lib/traceevent build dir with OUTPUT variable set

With the OUTPUT variable set the libtraceevent.a file is wrongly built
in the source directory:

 + make -d OUTPUT=/.../.build/perf-user/ DESTDIR=/.../.install/perf-user/
 ...
     Considering target file `../lib/traceevent//libtraceevent.a'.
      File `../lib/traceevent//libtraceevent.a' does not exist.
      Finished prerequisites of target file `../lib/traceevent//libtraceevent.a'.
     Must remake target `../lib/traceevent//libtraceevent.a'.
 Invoking recipe from Makefile:837 to update target `../lib/traceevent//libtraceevent.a'.
 Putting child 0x703850 (../lib/traceevent//libtraceevent.a) PID 8365 on the chain.
 Live child 0x703850 (../lib/traceevent//libtraceevent.a) PID 8365
     SUBDIR ../lib/traceevent/

 $ git clean -nxd
 Would remove tools/lib/traceevent/.event-parse.d
 Would remove tools/lib/traceevent/.parse-filter.d
 Would remove tools/lib/traceevent/.parse-utils.d
 Would remove tools/lib/traceevent/.trace-seq.d
 Would remove tools/lib/traceevent/event-parse.o
 Would remove tools/lib/traceevent/libtraceevent.a
 Would remove tools/lib/traceevent/parse-filter.o
 Would remove tools/lib/traceevent/parse-utils.o
 Would remove tools/lib/traceevent/trace-seq.o

This patch fixes this.

Note: Though this should already work with O=$outputdir we better use
the OUTPUT variable directly.

Signed-off-by: Robert Richter <robert.richter@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1344361396-7237-3-git-send-email-robert.richter@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Fix version file for perf documentation with OUTPUT variable set

Fixes the following:

 + make OUTPUT=/.../.build/perf-user/ DESTDIR=/.../.install/perf-user/ man install-man
 make -C Documentation man
 make[1]: Entering directory `/.../.source/linux.perf/tools/perf/Documentation'
 make[2]: Entering directory `/.../.source/linux.perf/tools/perf'
 make[2]: *** No rule to make target `PERF-VERSION-FILE'.  Stop.

Signed-off-by: Robert Richter <robert.richter@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1344361396-7237-2-git-send-email-robert.richter@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf script: Stop using pevent directly

We can get all that is needed using just event_format, that is available
via evsel->tp_format now.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-2hsr1686epa9f0vx4yg7z2zj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf sched: Use perf_sample

To reduce the number of parameters passed to the various event handling
functions.

Cc: Andrey Wagin <avagin@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-fc537qykjjqzvyol5fecx6ug@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf lock: Use evsel->tp_format and perf_sample

To reduce the number of parameters passed to the various event handling
functions.

Cc: Andrey Wagin <avagin@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bipk647rzq357yot9ao6ih73@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf kmem: Use evsel->tp_format and perf_sample

To reduce the number of parameters passed to the various event handling
functions.

Cc: Andrey Wagin <avagin@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-p936ngz06yo5h797ggsm7xru@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf evsel: Cache associated event_format

We already lookup the associated event_format when reading the perf.data
header, so that we can cache the tracepoint name in evsel->name, so do
it a little further and save the event_format itself, so that we can
avoid relookups in tools that need to access it.

Change the tools to take the most obvious advantage, when they were
using pevent_find_event directly. More work is needed for further
removing the need of a pointer to pevent, such as when asking for event
field values ("common_pid" and the other common fields and per
event_format fields).

This is something that was planned but only got actually done when
Andrey Wagin needed to do this lookup at perf_tool->sample() time, when
we don't have access to pevent (session->pevent) to use with
pevent_find_event().

Cc: Andrey Wagin <avagin@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/n/tip-txkvew2ckko0b594ae8fbnyk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf header: Set the tracepoint names on PERF_RECORD_HEADER_TRACING_DATA

We only have access to pevent after processing that event, so set the
tracepoint names there.

Right now this isn't a problem as we're deferring resolving the
tracepoint names to when we process samples, but in the next patches we
will be doing it in advance, to avoid relookups, so do it earlier, as
soon as we process the tracing data event.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-tzb7srmsl7a6o3icw592iv2o@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Add dump_stack function

To help in debugging the tools, provides functionality roughly similar
to the function with the same name in the kernel.

Copied from glibc backtrace function man page.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-6nw2sak21bqy8h1m2syyo816@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tracing/trivial: Fix some typos in kernel/trace

Fix some typos in kernel/trace.

Link: http://lkml.kernel.org/r/1343887320.2228.9.camel@louis-ThinkPad-T410
Signed-off-by: Wang Tianhong <wangthbj@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

tracing/filter: Add missing initialization

Add missing initialization for ret variable. Its initialization
is based on the re_cnt variable, which is being set deep down
in the ftrace_function_filter_re function.

I'm not sure compilers would be smart enough to see this in near
future, so killing the warning this way.

Link: http://lkml.kernel.org/r/1340120894-9465-2-git-send-email-jolsa@redhat.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

tracing: Fix wakeup_rt self test on virtual machines

The warkeup_rt self test used msleep() calls to wait for real time
tasks to wake up and run. On bare-metal hardware, this was enough as
the scheduler should let the RT task run way before the non-RT task
wakes up from the msleep(). If it did not, then that would mean the
scheduler was broken.

But when dealing with virtual machines, this is a different story.
If the RT task wakes up on a VCPU, it's up to the host to decide when
that task gets to schedule, which can be far behind the time that the
non-RT task wakes up. In this case, the test would fail incorrectly.

As we are not testing the scheduler, but instead the wake up tracing,
we can use completions to wait and not depend on scheduler timings
to see if events happen on time.

Link: http://lkml.kernel.org/r/1343663105.3847.7.camel@fedora
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Tested-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

perf hists browser: Add verbose mode hotkey

Right now just shows the DSO name in callchain entries, to help debug
the DWARF CFI post unwind code.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-54gouunatugtfw92j6gddk45@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'perf-core-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/urgent

Pull perf/core fixes and some late updates from Arnaldo Carvalho de Melo:

 * Make clean brace expansion fix for some shells, from Palmer Cox

 * Warn user just once per guest kernel when not finding kernel info,
   from David Ahern

 * perf test fix from Jiri Olsa

 * Fix error handling on event creation in perf top, from David Ahern

 * Fix check on perf_target__strnerror, from Namhyung Kim

 * Save the whole cmdline, from David Ahern

 * Prep work for the DWARF CFI post unwinder, so that it doesn't
   uses perf_session in lots of places, just evlist/evsel is enough.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge branch 'for-linus-2' of git://git./linux/kernel/git/viro/vfs

Pull VFS fixes and cleanups from Al Viro.

Most of this is the series to remove sync_supers() and the
->write_supers VFS callback from Artem Bityutskiy.  One commit to do the
actual removal work, a whole series of commits to fix up stale comments
etc all over the tree.

There's also a regression fix for an incorrect use of mnt_drop_write()
in do_dentry_open().

* 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  missed mnt_drop_write() in do_dentry_open()
  UBIFS: nuke pdflush from comments
  gfs2: nuke pdflush from comments
  drbd: nuke pdflush from comments
  nilfs2: nuke write_super from comments
  hfs: nuke write_super from comments
  vfs: nuke pdflush from comments
  jbd/jbd2: nuke write_super from comments
  btrfs: nuke pdflush from comments
  btrfs: nuke write_super from comments
  ext4: nuke pdflush from comments
  ext4: nuke write_super from comments
  ext3: nuke write_super from comments
  Documentation: fix the VM knobs descritpion WRT pdflush
  Documentation: get rid of write_super
  vfs: kill write_super and sync_supers

missed mnt_drop_write() in do_dentry_open()

This one ought to be __mnt_drop_write(), to match __mnt_want_write()
in the beginning...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

UBIFS: nuke pdflush from comments

The pdflush thread is long gone, so this patch removes references to pdflush
from UBIFS comments.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

gfs2: nuke pdflush from comments

The pdflush thread is long gone, so this patch removes references to pdflush
from gfs comments.

Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

drbd: nuke pdflush from comments

The pdflush thread is long gone, so this patch removes references to pdflush
from drbd comments.

Cc: drbd-dev@lists.linbit.com
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>