Linus Torvalds [Wed, 11 Nov 2009 19:26:42 +0000 (11:26 -0800)]
Merge branch 'for_linus' of git://git./linux/kernel/git/mchehab/linux-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (27 commits)
V4L/DVB (13314): saa7134: set ts_force_val for the Hauppauge WinTV HVR-1150
V4L/DVB (13313): saa7134: add support for FORCE_TS_VALID mode for mpeg ts input
V4L/DVB (13311): uvcvideo: Fix compilation warning with 2.6.32 due to type mismatch with abs()
V4L/DVB (13309): uvcvideo: Ignore the FIX_BANDWIDTH for compressed video
V4L/DVB (13287): ce6230 - saa7164-cmd: Fix wrong sizeof
V4L/DVB (13286): pxa-camera: Fix missing sched.h
V4L/DVB (13264): gspca_mr97310a: Change vstart for CIF sensor type 1 cams
V4L/DVB (13257): gspca - m5602-s5k4aa: Add vflip for Fujitsu Amilo Xi 2528
V4L/DVB (13256): gspca - m5602-s5k4aa: Add another MSI GX700 vflip quirk
V4L/DVB (13255): gspca - m5602-s5k4aa: Add vflip quirk for the Bruneinit laptop
V4L/DVB (13240): firedtv: fix regression: tuning fails due to bogus error return
V4L/DVB (13237): firedtv: length field corrupt in ca2host if length>127
V4L/DVB (13230): s2255drv: Don't conditionalize video buffer completion on waiting processes
V4L/DVB (13202): smsusb: add autodetection support for three additional Hauppauge USB IDs
V4L/DVB (13190): em28xx: fix panic that can occur when starting audio streaming
V4L/DVB (13170): bttv: Fix reversed polarity error when switching video standard
V4L/DVB (13169): bttv: Fix potential out-of-order field processing
V4L/DVB (13167): pt1: Fix a compile error on arm
V4L/DVB (13132): fix use-after-free Oops, resulting from a driver-core API change
V4L/DVB (13131): pxa_camera: fix camera pixel format configuration
...
Atsushi Nemoto [Mon, 9 Nov 2009 23:21:19 +0000 (23:21 +0000)]
mtd/maps: Fix accidental removal in Makefile
The commit
d79c326 ("gpio-addr-flash: new driver for GPIO assisted
flash addressing") removed two lines from the Makefile by accident.
Though I'm not sure how this accident happened, this patch reverts the
removal.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 9 Nov 2009 17:58:31 +0000 (09:58 -0800)]
Merge branch 'i2c-for-linus' of git://git./linux/kernel/git/jdelvare/staging
* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
i2c: Add an interface to lock/unlock an I2C bus segment
i2c-piix4: Modify code name SB900 to Hudson-2
Linus Torvalds [Mon, 9 Nov 2009 17:57:02 +0000 (09:57 -0800)]
Merge branch 'for-linus' of git://neil.brown.name/md
* 'for-linus' of git://neil.brown.name/md:
md/raid5: make sure curr_sync_completes is uptodate when reshape starts
md: don't clear endpoint for resync when resync is interrupted.
Hugh Dickins [Mon, 9 Nov 2009 15:58:23 +0000 (15:58 +0000)]
ksm: cond_resched in unstable tree
KSM needs a cond_resched() for CONFIG_PREEMPT_NONE, in its unbounded
search of the unstable tree. The stable tree cases already have one,
and originally there was one down inside get_user_pages();
but I missed it when I converted to follow_page() instead.
Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Acked-by: Izik Eidus <ieidus@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 9 Nov 2009 17:52:55 +0000 (09:52 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/ryusuke/nilfs2
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
nilfs2: fix missing cleanup of gc cache on error cases
nilfs2: fix kernel oops in error case of nilfs_ioctl_move_blocks
Linus Torvalds [Mon, 9 Nov 2009 17:51:42 +0000 (09:51 -0800)]
Merge git://git./linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (34 commits)
net/fsl_pq_mdio: add module license GPL
can: fix WARN_ON dump in net/core/rtnetlink.c:rtmsg_ifinfo()
can: should not use __dev_get_by_index() without locks
hisax: remove bad udelay call to fix build error on ARM
ipip: Fix handling of DF packets when pmtudisc is OFF
qlge: Set PCIe reset type for EEH to fundamental.
qlge: Fix early exit from mbox cmd complete wait.
ixgbe: fix traffic hangs on Tx with ioatdma loaded
ixgbe: Fix checking TFCS register for TXOFF status when DCB is enabled
ixgbe: Fix gso_max_size for 82599 when DCB is enabled
macsonic: fix crash on PowerBook 520
NET: cassini, fix lock imbalance
ems_usb: Fix byte order issues on big endian machines
be2net: Bug fix to send config commands to hardware after netdev_register
be2net: fix to set proper flow control on resume
netfilter: xt_connlimit: fix regression caused by zero family value
rt2x00: Don't queue ieee80211 work after USB removal
Revert "ipw2200: fix oops on missing firmware"
decnet: netdevice refcount leak
netfilter: nf_nat: fix NAT issue in 2.6.30.4+
...
Linus Torvalds [Mon, 9 Nov 2009 17:51:15 +0000 (09:51 -0800)]
Merge git://git./linux/kernel/git/davem/sparc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
sparc: Move of_set_property_mutex acquisition outside of devtree_lock grab.
sparc64: replace parentheses in pmul()
sparc64: Add a comment about why we only use certain memory barriers these days.
Linus Torvalds [Mon, 9 Nov 2009 17:50:55 +0000 (09:50 -0800)]
Merge git://git./linux/kernel/git/davem/ide-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6:
Revert "ide: try to use PIO Mode 0 during probe if possible"
Linus Torvalds [Mon, 9 Nov 2009 17:50:15 +0000 (09:50 -0800)]
Merge git://git./linux/kernel/git/sfrench/cifs-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
cifs: don't use CIFSGetSrvInodeNumber in is_path_accessible
cifs: clean up handling when server doesn't consistently support inode numbers
Linus Torvalds [Mon, 9 Nov 2009 17:49:58 +0000 (09:49 -0800)]
Merge branch 'sh/for-2.6.32' of git://git./linux/kernel/git/lethal/sh-2.6
* 'sh/for-2.6.32' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
sh: Replace old style lock initializer
sh: Account for cache aliases in flush_icache_range()
sh: unwinder: Fix up invalid PC refetch in dwarf unwinder.
serial: sh-sci: disable callback typo fix
Linus Torvalds [Mon, 9 Nov 2009 17:47:21 +0000 (09:47 -0800)]
Merge branch 'for-linus' of git://linux-m32r.org/git/takata/linux-2.6_dev
* 'for-linus' of git://www.linux-m32r.org/git/takata/linux-2.6_dev:
m32r: fix arch/m32r/boot/compressed/Makefile
Linus Torvalds [Mon, 9 Nov 2009 17:30:14 +0000 (09:30 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
ALSA: snd-aica: declare MODULE_FIRMWARE
ALSA: hda - Don't initialize CORB/RIRB for single_cmd mode
ALSA: usb-audio: fix combine_word problem
sound: Replace old style lock initializer
ASoC: S3C64XX I2S: Enable audio-bus clock
ASoC: OMAP: Don't try to set unsupported OMAP_DMA_DATA_BURST_16 on OMAP1
ALSA: hda, move hp_bseries_system
sound: Use KERN_WARNING instead of KERN_WARN, which does not exist
ALSA: intel8x0: Mute External Amplifier by default for another Sony model
ALSA: hda - Add OLPC XO-1.5 PCI ID
ALSA: hda - Enable GPIO control for mute LED on HP systems
Linus Torvalds [Mon, 9 Nov 2009 17:28:42 +0000 (09:28 -0800)]
Merge branch 'release' of git://git./linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
ACPI: sleep: another HP/Compaq DMI entries for init_set_sci_en_on_resume
ACPI: add DMI entry for SCI_EN resume quirk on HP dv4
thermal: sysfs-api.txt - document passive attribute for thermal zones
thermal: sysfs-api.txt - reformat for improved readability
acpi: thermal: Add EOL to the trip_point_N_type strings
ACPI: Move dereference after NULL test
ACPICA: avoid "Info: mapping multiple BARs. Your kernel is fine."
ACPI: add __cpuinit to acpi_processor_add()
acpi-power-meter: Don't leak ACPI error codes to userspace
eeepc-laptop: don't enable camera at startup if it's already on.
Revert "eeepc-laptop: Prevent a panic when disabling RT2860 wireless when associated"
ACPI: clean up video.c boundary checks and types
Thomas Gleixner [Fri, 6 Nov 2009 22:42:05 +0000 (22:42 +0000)]
sh: Replace old style lock initializer
SPIN_LOCK_UNLOCKED is deprecated. Use __SPIN_LOCK_UNLOCKED instead.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-sh@vger.kernel.org
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Matt Fleming [Thu, 5 Nov 2009 23:14:39 +0000 (23:14 +0000)]
sh: Account for cache aliases in flush_icache_range()
The icache may also contain aliases so we must account for them just
like we do when manipulating the dcache. We usually get away with
aliases in the icache because the instructions that are read from memory
are read-only, i.e. they never change. However, the place where this
bites us is when the code has been modified.
Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
David S. Miller [Mon, 9 Nov 2009 01:41:20 +0000 (17:41 -0800)]
sparc: Move of_set_property_mutex acquisition outside of devtree_lock grab.
Otherwise we try to sleep with preemption disabled, etc.
Noticed by Thomas Gleixner.
Signed-off-by: David S. Miller <davem@davemloft.net>
Hirokazu Takata [Sun, 8 Nov 2009 23:51:35 +0000 (08:51 +0900)]
m32r: fix arch/m32r/boot/compressed/Makefile
- Fix a comment string
- Fix a typo of $(suffix-y)
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Ryusuke Konishi [Sun, 8 Nov 2009 03:09:24 +0000 (12:09 +0900)]
nilfs2: fix missing cleanup of gc cache on error cases
This fixes an -rc1 regression brought by the commit:
1cf58fa840472ec7df6bf2312885949ebb308853 ("nilfs2: shorten freeze
period due to GC in write operation v3").
Although the patch moved out a function call of
nilfs_ioctl_move_blocks() to nilfs_ioctl_clean_segments() from
nilfs_ioctl_prepare_clean_segments(), it didn't move corresponding
cleanup job needed for the error case.
This will move the missing cleanup job to the destination function.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Acked-by: Jiro SEKIBA <jir@unicus.jp>
Ryusuke Konishi [Sat, 7 Nov 2009 09:45:16 +0000 (18:45 +0900)]
nilfs2: fix kernel oops in error case of nilfs_ioctl_move_blocks
This fixes a kernel oops reported by Markus Trippelsdorf in the email
titled "[NILFS users] kernel Oops while running nilfs_cleanerd".
The oops was caused by a bug of error path in
nilfs_ioctl_move_blocks() function, which was inlined in
nilfs_ioctl_clean_segments().
nilfs_ioctl_move_blocks checks duplication of blocks which will be
moved in garbage collection. But, the check should have be done
within nilfs_ioctl_move_inode_block() to prevent list corruption among
buffers storing the target blocks.
To fix the kernel oops, this moves forward the duplication check
before the list insertion.
I also tested this for stable trees [2.6.30, 2.6.31].
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: stable <stable@kernel.org>
Sebastian Siewior [Fri, 6 Nov 2009 08:50:28 +0000 (08:50 +0000)]
net/fsl_pq_mdio: add module license GPL
or it will taint the kernel and fail to load becuase
of_address_to_resource() is GPL only.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wolfgang Grandegger [Fri, 6 Nov 2009 23:53:13 +0000 (23:53 +0000)]
can: fix WARN_ON dump in net/core/rtnetlink.c:rtmsg_ifinfo()
On older kernels, e.g. 2.6.27, a WARN_ON dump in rtmsg_ifinfo()
is thrown when the CAN device is registered due to insufficient
skb space, as reported by various users. This patch adds the
rtnl_link_ops "get_size" to fix the problem. I think this patch
is required for more recent kernels as well, even if no WARN_ON
dumps are triggered. Maybe we also need "get_xstats_size" for
the CAN xstats.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 6 Nov 2009 00:23:01 +0000 (00:23 +0000)]
can: should not use __dev_get_by_index() without locks
bcm_proc_getifname() is called with RTNL and dev_base_lock
not held. It calls __dev_get_by_index() without locks, and
this is illegal (might crash)
Close the race by holding dev_base_lock and copying dev->name
in the protected section.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Oliver Hartkopp <oliver@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Roel Kluin [Sun, 8 Nov 2009 08:26:56 +0000 (00:26 -0800)]
sparc64: replace parentheses in pmul()
`>>' has a higher precedence than `?' so src2 evaluated to
either 16 or 0 dependent on the bits set in rs2.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Takashi Iwai [Sun, 8 Nov 2009 08:16:15 +0000 (09:16 +0100)]
Merge branch 'fix/hda' into for-linus
Takashi Iwai [Sun, 8 Nov 2009 08:16:06 +0000 (09:16 +0100)]
Merge branch 'fix/misc' into for-linus
Ben Hutchings [Sat, 7 Nov 2009 22:13:39 +0000 (22:13 +0000)]
ALSA: snd-aica: declare MODULE_FIRMWARE
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Michael Krufky [Wed, 4 Nov 2009 17:23:57 +0000 (14:23 -0300)]
V4L/DVB (13314): saa7134: set ts_force_val for the Hauppauge WinTV HVR-1150
The Hauppauge WinTV HVR-1150 retail boards require the FORCE_TS_VALID bit
to be set in order to function properly. This change will work on the early
revisions on the board as well, but the final revision will not function
without this change.
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michael Krufky [Wed, 4 Nov 2009 17:19:35 +0000 (14:19 -0300)]
V4L/DVB (13313): saa7134: add support for FORCE_TS_VALID mode for mpeg ts input
When FORCE_TS_VALID mode is enabled, the saa713x will accept MPEG TS input
without requiring TS_VALID set high. This is required for some new boards
to function properly, due to the hardware design implementation.
The configuration is toggled within the board setup configuration. Boards
that do not have this bit set will function as before with no change.
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Laurent Pinchart [Wed, 4 Nov 2009 16:11:10 +0000 (13:11 -0300)]
V4L/DVB (13311): uvcvideo: Fix compilation warning with 2.6.32 due to type mismatch with abs()
The abs() macro has changed in 2.6.32 and returns a long instead of an
int. Fix the driver to avoid compilation warnings.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Laurent Pinchart [Wed, 4 Nov 2009 14:09:12 +0000 (11:09 -0300)]
V4L/DVB (13309): uvcvideo: Ignore the FIX_BANDWIDTH for compressed video
The FIX_BANDWIDTH quirk tries to work around cameras requesting the
maximum bandwidth regardless of the image size by computing a bandwidth
estimate. This works only for uncompressed frames.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean Delvare [Wed, 4 Nov 2009 18:26:59 +0000 (15:26 -0300)]
V4L/DVB (13287): ce6230 - saa7164-cmd: Fix wrong sizeof
Which is why I have always preferred sizeof(struct foo) over
sizeof(var).
Cc: Antti Palosaari <crope@iki.fi>
Acked-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jonathan Cameron [Wed, 4 Nov 2009 17:18:04 +0000 (14:18 -0300)]
V4L/DVB (13286): pxa-camera: Fix missing sched.h
Required for wakeup call.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Theodore Kilgore [Sun, 1 Nov 2009 15:59:42 +0000 (12:59 -0300)]
V4L/DVB (13264): gspca_mr97310a: Change vstart for CIF sensor type 1 cams
gspca_mr97310a: Change vstart for CIF sensor type 1 cams
This fixes the distortion at the end of the frame, and avoids the bad frame
dropping done because of this distortion, trippling the framerate!
Signed-off-by: Theodore Kilgore <kilgota@banach.math.auburn.edu>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Erik Andrén [Sat, 3 Oct 2009 13:01:41 +0000 (10:01 -0300)]
V4L/DVB (13257): gspca - m5602-s5k4aa: Add vflip for Fujitsu Amilo Xi 2528
Adds a vflip quirk for the Fujitsu Amilo Xi 2528. Thanks to Evgeny for the report.
Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Erik Andrén [Sun, 27 Sep 2009 13:20:21 +0000 (10:20 -0300)]
V4L/DVB (13256): gspca - m5602-s5k4aa: Add another MSI GX700 vflip quirk
Adds another vflip quirk for the MSI GX700.
Thanks to John Katzmaier for reporting.
Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Erik Andrén [Sun, 27 Sep 2009 13:11:43 +0000 (10:11 -0300)]
V4L/DVB (13255): gspca - m5602-s5k4aa: Add vflip quirk for the Bruneinit laptop
Adds a vflip quirk for the Bruneinit laptop. Thanks to Jörg for the report
Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Stefan Richter [Sat, 17 Oct 2009 20:46:25 +0000 (17:46 -0300)]
V4L/DVB (13240): firedtv: fix regression: tuning fails due to bogus error return
Since 2.6.32(-rc1), DVB core checks the return value of
dvb_frontend_ops.set_frontend. Now it becomes apparent that firedtv
always returned a bogus value from its set_frontend method.
CC: stable@kernel.org
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Henrik Kurelid [Sat, 3 Oct 2009 08:37:58 +0000 (05:37 -0300)]
V4L/DVB (13237): firedtv: length field corrupt in ca2host if length>127
This solves a problem in firedtv that has become major for Swedish DVB-T
users the last month or so. It will most likely solve issues seen by
other users as well.
If the length of an AVC message is greater than 127, the length field
should be encoded in LV mode instead of V mode. V mode can only be used
if the length is 127 or less. This patch ensures that the CA_PMT
message is always encoded in LV mode so PMT message of greater lengths
can be supported.
Signed-off-by: Henrik Kurelid <henrik@kurelid.se>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mike Isely [Wed, 23 Sep 2009 21:06:57 +0000 (18:06 -0300)]
V4L/DVB (13230): s2255drv: Don't conditionalize video buffer completion on waiting processes
The s2255 driver had logic which aborted processing of a video frame
if there was no process waiting on the video buffer in question. That
simply doesn't work when the application is doing things in an
asynchronous manner. If the application went to the trouble to queue
the buffer in the first place, then the driver should always attempt
to complete it - even if the application at that moment has its
attention turned elsewhere. Applications which always blocked waiting
for I/O on the capture device would not have been affected by this.
Applications which *mostly* blocked waiting for I/O on the capture
device probably only would have been somewhat affected (frame lossage,
at a rate which goes up as the application blocks less). Applications
which never blocked on the capture device (e.g. polling only) however
would never have been able to receive any video frames, since in that
case this "is anyone waiting on this?" check on the buffer never would
have evalutated true. This patch just deletes that harmful check
against the buffer's wait queue.
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
CC: stable@kernel.org
Michael Krufky [Wed, 21 Oct 2009 21:27:29 +0000 (18:27 -0300)]
V4L/DVB (13202): smsusb: add autodetection support for three additional Hauppauge USB IDs
Add support for three new Hauppauge Device USB IDs:
2040:b900
2040:b910
2040:c000
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Devin Heitmueller [Thu, 15 Oct 2009 04:14:34 +0000 (01:14 -0300)]
V4L/DVB (13190): em28xx: fix panic that can occur when starting audio streaming
Because the counters were not reset when starting up streaming, they would
be reused from the previous run. This can result in cases such that when the
second instance of streaming starts up, the "cnt" variable in
em28xx_audio_isocirq() can end up being negative, resulting in attempting to
write to memory before the start of runtime->dma_area (as well as having a
negative number of bytes to copy).
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
CC: stable@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mike Isely [Mon, 21 Sep 2009 15:42:22 +0000 (12:42 -0300)]
V4L/DVB (13170): bttv: Fix reversed polarity error when switching video standard
The bttv driver function which handles switching of the video standard
(set_tvnorm() in bttv-driver.c) includes a check which can optionally
also reset the cropping configuration to a default value. It is
"optional" based on a comparison of the cropcap parameters of the
previous vs the newly requested video standard. The comparison is
being done with a memcmp(), a function which only returns a true value
if the comparison actually fails.
This if-statement appears to have been written to assume wrong
memcmp() semantics. That is, it was re-initializing the cropping
configuration only if the new video standard did NOT have different
cropcap values. That doesn't make any sense. One definitely should
reset things if the cropcap parameters are different - if there's any
comparison to made at all.
The effect of this problem was that a transition from, say, PAL to
NTSC would leave in place old cropping setup that made sense for the
PAL geometry but not for NTSC. If the application doesn't care about
cropping it also won't try to reset the cropping configuration,
resulting in an improperly cropped video frame. In the case I was
testing this actually caused black video frames to be displayed.
Another interesting effect of this bug is that if one does something
which does NOT change the video standard and this function is run,
then the cropping setup gets reset anyway - again because of the
backwards comparison. It turns out that just running anything which
merely opens and closes the video device node (e.g. v4l-info) will
cause this to happen. One can argue that simply opening the device
node and not doing anything to it should not mess with any of its
state - but because of this behavior, any TV app which does such
things (e.g. xawtv) probably therefore doesn't see the problem.
The solution is to fix the sense of the if-statement. It's easy to
see how this mistake could have been made given how memcmp() works.
The patch is therefore removal of a single "!" character from the
if-statement in set_tvnorm in bttv-driver.c.
Signed-off-by: Mike Isely <isely@pobox.com>
CC: stable@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mike Isely [Mon, 21 Sep 2009 15:09:08 +0000 (12:09 -0300)]
V4L/DVB (13169): bttv: Fix potential out-of-order field processing
There is a subtle interaction in the bttv driver which can result in
fields being repeatedly processed out of order. This is a problem
specifically when running in V4L2_FIELD_ALTERNATE mode (probably the
most common case).
1. The determination of which fields are associated with which buffers
happens in videobuf, before the bttv driver gets a chance to queue the
corresponding DMA. Thus by the point when the DMA is queued for a
given buffer, the algorithm has to do the queuing based on the
buffer's already assigned field type - not based on which field is
"next" in the video stream.
2. The driver normally tries to queue both the top and bottom fields
at the same time (see bttv_irq_next_video()). It tries to sort out
top vs bottom by looking at the field type for the next 2 available
buffers and assigning them appropriately.
3. However the bttv driver *always* actually processes the top field
first. There's even an interrupt set aside for specifically
recognizing when the top field has been processed so that it can be
marked done even while the bottom field is still being DMAed.
Given all of the above, if one gets into a situation where
bttv_irq_next_video() gets entered when the first available buffer has
been pre-associated as a bottom field, then the function is going to
process the buffers out of order. That first available buffer will be
put into the bottom field slot and the buffer after that will be put
into the top field slot. Problem is, since the top field is always
processed first by the driver, then that second buffer (the one after
the first available buffer) will be the first one to be finished.
Because of the strict fifo handling of all video buffers, then that
top field won't be seen by the app until after the bottom field is
also processed. Worse still, the app will get back the
chronologically later bottom field first, *before* the top field is
received. The buffer's timestamps will even be backwards.
While not fatal to most TV apps, this behavior can subtlely degrade
userspace deinterlacing (probably will cause jitter). That's probably
why it has gone unnoticed. But it will also cause serious problems if
the app in question discards all but the latest received buffer (a
latency minimizing tactic) - causing one field to only ever be
displayed since the other is now always late. Unfortunately once you
get into this state, you're stuck this way - because having consumed
two buffers, now the next time around the "first" available buffer
will again be a bottom field and the same thing happens.
How can we get into this state? In a perfect world, where there's
always a few free buffers queued to the driver, it should be
impossible. However if something disrupts streaming, e.g. if the
userspace app can't queue free buffers fast enough for a moment due
perhaps to a CPU scheduling glitch, then the driver can get
momentarily starved and some number of fields will be dropped. That's
OK. But if an odd number of fields get dropped, then that "first"
available buffer might be the bottom field and now we're stuck...
This patch fixes that problem by deliberately only setting up a single
field for one frame if we don't get a top field as the first available
buffer. By purposely skipping the other field, then we only handle a
single buffer thus bringing things back into proper sync (i.e. top
field first) for the next frame. To do this we just drop the few
lines in bttv_irq_next_video() that attempt to set up the second
buffer when that second buffer isn't for the bottom field.
This is definitely a problem in when in V4L2_FIELD_ALTERNATE mode. In
the other modes this change either has no effect or doesn't harm
things any further anyway.
Signed-off-by: Mike Isely <isely@pobox.com>
CC: stable@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
HIRANO Takahito [Sun, 20 Sep 2009 11:57:49 +0000 (08:57 -0300)]
V4L/DVB (13167): pt1: Fix a compile error on arm
The lack of #include <linux/vmalloc.h> caused a compile error on some
architectures.
Signed-off-by: HIRANO Takahito <hiranotaka@zng.info>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Guennadi Liakhovetski [Mon, 5 Oct 2009 15:54:54 +0000 (12:54 -0300)]
V4L/DVB (13132): fix use-after-free Oops, resulting from a driver-core API change
Commit
b4028437876866aba4747a655ede00f892089e14 has broken again re-use of
device objects across device_register() / device_unregister() cycles. Fix
soc-camera by nullifying the struct after device_unregister().
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Guennadi Liakhovetski [Mon, 5 Oct 2009 15:54:34 +0000 (12:54 -0300)]
V4L/DVB (13131): pxa_camera: fix camera pixel format configuration
A missed conversion prevents correct pixel format negotiation with client
drivers.
Reported-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Guennadi Liakhovetski [Mon, 5 Oct 2009 15:51:47 +0000 (12:51 -0300)]
V4L/DVB (13129): sh_mobile_ceu_camera: fix cropping for scaling clients
Fix a bug in cropping calculation, when the client is also scaling the image.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans de Goede [Sun, 4 Oct 2009 17:04:47 +0000 (14:04 -0300)]
V4L/DVB (13122): gscpa - stv06xx + ov518: dont discard every other frame
When we call gspca_frame_add, it returns a pointer to the frame passed in,
unless we call it with LAST_PACKET, when it will return a pointer to a
new frame in which to store the frame data for the next frame.
The frame pointer was not updated in stv06xx and ov518.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Seth Barry [Sun, 27 Sep 2009 19:42:29 +0000 (16:42 -0300)]
V4L/DVB (13109): tda18271: fix signedness issue in tda18271_rf_tracking_filters_init
While having tda18271 module set with debug=17 (cal & info prints) and
cal=0 (delay calibration process until first use) - I discovered that
during the calibration process, if the frequency test for
69750000
returned a bcal of 0 (see tda18721-fe.c in tda18271_powerscan func) that
the tuner wouldn't be able to pickup any of the frequencies in the range
(all the other frequencies bands returned bcal=1). I spent some time
going over the code and the NXP's tda18271 spec (ver.4 of it i think) and
adding a lot of debug prints and walking/stepping through the calibration
process. I found that when the powerscan fails to find a frequency, the
rf calibration is not run and the default value is supposed to be used in
its place (pulled from the RF_CAL_map table) - but something was getting
goofed up there.
Now, my c coding skills are very rusty, but i think root of the problem is
a signedness issue with the math operation for calculating the rf_a1 and
rf_a2 values in tda18271_rf_tracking_filters_init func, which results in
values like 20648 for rf_a1 (when it should probably have a value like 0,
or so slightly negative that it should be zero - this bad value for rf_a1
would in turn makes the approx calc within
tda18271c2_rf_tracking_filters_correction go out of whack). The simplest
solution i found was to explicitly convert the signedness of the
denominator to avoid the implicit conversion. The values placed into the
u32 rf_freq array should never exceed about 900mhz, so i think the s32 max
value shouldn't be an issue in this case.
I've tested it out a little, and even when i get a bcal=0 with the
modified code, the default calibration value gets used, rf_a1 is zero, and
the tuner seems to lock on the stream and mythtv seems to play it fine.
Signed-off-by: Seth Barry <seth@cyberseth.com>
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
CC: stable@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michael Krufky [Sun, 27 Sep 2009 17:05:12 +0000 (14:05 -0300)]
V4L/DVB (13107): tda18271: fix overflow in FM radio frequency calculation
Multiplication by 62500 causes an overflow in the 32 bit freq variable,
which is later divided by 1000 when using FM radio.
This patch prevents the overflow by scaling the frequency value correctly
upfront. Thanks to Henk Vergonet for spotting the problem and providing
a preliminary patch, which this changeset was based upon.
Cc: Henk Vergonet <Henk.Vergonet@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
CC: stable@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Martin Samek [Thu, 1 Oct 2009 01:59:09 +0000 (22:59 -0300)]
V4L/DVB (13079): dib0700: fixed xc2028 firmware loading kernel oops
Fixing kernel oops when driver attemps to load xc2028 firmware.
Note by djh: the patch contribute by Martin is a port of a fix I made during
the PCTV 340e development. It's a temporary workaround that fixes a regression
(an OOPS condition) and the real fix should be in the code that manages the
i2c master on the dib7000p. But this fix does address the immmediate
regression and should be merged upstream until we do a cleaner fix.
Signed-off-by: Martin Samek <martin@marsark.sytes.net>
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
CC: stable@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Patrick Boettcher [Sat, 19 Sep 2009 08:24:40 +0000 (05:24 -0300)]
V4L/DVB (13050): DIB0700: fix-up USB device ID for Terratec/Leadtek
git commit
db48138f6bc4d2b613b08731ffc8b319432ebc25 changed by accident the
assignment of certain USB IDs to their device-specific-handlers.
Thanks to Edward Sheldrake for finding this regression
Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michael Krufky [Sun, 27 Sep 2009 22:11:34 +0000 (19:11 -0300)]
V4L/DVB (13048): dib0070: fix build dependency when driver is disabled
Fix build dependency on function, dib0070_ctrl_agc_filter
[mchehab@redhat.com: reverted the quick workaround
3f48258e50ef4]
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean Delvare [Sat, 7 Nov 2009 12:10:46 +0000 (13:10 +0100)]
i2c: Add an interface to lock/unlock an I2C bus segment
Some drivers need to be able to prevent access to an I2C bus segment
for a specific period of time. Add an interface for them to do so
without twiddling with i2c-core internals.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Ben Hutchings <bhutchings@solarflare.com>
Crane Cai [Sat, 7 Nov 2009 12:10:46 +0000 (13:10 +0100)]
i2c-piix4: Modify code name SB900 to Hudson-2
Change SB900 to its formal code name Hudson-2.
Signed-off-by: Crane Cai <crane.cai@amd.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Takashi Iwai [Sat, 7 Nov 2009 08:49:04 +0000 (09:49 +0100)]
ALSA: hda - Don't initialize CORB/RIRB for single_cmd mode
So far, CORB/RIRB still remains even if the driver is switched to the
single_cmd mode. The specification says that this should be disabled,
but I hoped this isn't the case; indeed most devices worked together with
CORB/RIRB.
However, Poulsbo (US15W) seems problematic with this setup, and it
requires to disable CORB/RIRB when single_cmd is used.
Now this patch disables CORB/RIRB initialization when the single_cmd
mode is used. Also the unsolicited event is disabled because it can't
work without RIRB.
Reported-and-tested-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Julian Anastasov [Fri, 6 Nov 2009 21:44:53 +0000 (23:44 +0200)]
ALSA: usb-audio: fix combine_word problem
Fix combine_word problem where first octet is not
read properly. The only affected place seems to be the
INPUT_TERMINAL type. Before now, sound controls can be created
with the output terminal's name which is a fallback mechanism
used only for unknown input terminal types. For example,
Line can wrongly appear as Speaker. After the change it
should appear as Line.
The side effect of this change can be that users
can expect the wrong control name in their scripts or
programs while now we return the correct one.
Probably, these defines should use get_unaligned_le16 and
friends.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Thomas Gleixner [Fri, 6 Nov 2009 22:41:29 +0000 (22:41 +0000)]
sound: Replace old style lock initializer
SPIN_LOCK_UNLOCKED is deprecated. Use __SPIN_LOCK_UNLOCKED instead.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Martin Michlmayr [Fri, 6 Nov 2009 14:52:34 +0000 (14:52 +0000)]
hisax: remove bad udelay call to fix build error on ARM
The hisax ISDN driver fails to build on ARM with CONFIG_HISAX_ELSA:
| drivers/built-in.o: In function `modem_set_dial':
| drivers/isdn/hisax/elsa_ser.c:535: undefined reference to `__bad_udelay'
| drivers/isdn/hisax/elsa_ser.c:544: undefined reference to `__bad_udelay'
| drivers/built-in.o: In function `modem_set_init':
| drivers/isdn/hisax/elsa_ser.c:486: undefined reference to `__bad_udelay'
| [...]
According to the comment in arch/arm/include/asm/delay.h, __bad_udelay
is specifically designed on ARM to produce a build failure when udelay
is called with a value > 2000.
Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Fri, 6 Nov 2009 10:37:41 +0000 (10:37 +0000)]
ipip: Fix handling of DF packets when pmtudisc is OFF
RFC 2003 requires the outer header to have DF set if DF is set
on the inner header, even when PMTU discovery is off for the
tunnel. Our implementation does exactly that.
For this to work properly the IPIP gateway also needs to engate
in PMTU when the inner DF bit is set. As otherwise the original
host would not be able to carry out its PMTU successfully since
part of the path is only visible to the gateway.
Unfortunately when the tunnel PMTU discovery setting is off, we
do not collect the necessary soft state, resulting in blackholes
when the original host tries to perform PMTU discovery.
This problem is not reproducible on the IPIP gateway itself as
the inner packet usually has skb->local_df set. This is not
correctly cleared (an unrelated bug) when the packet passes
through the tunnel, which allows fragmentation to occur. For
hosts behind the IPIP gateway it is readily visible with a simple
ping.
This patch fixes the problem by performing PMTU discovery for
all packets with the inner DF bit set, regardless of the PMTU
discovery setting on the tunnel itself.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ron Mercer [Fri, 6 Nov 2009 07:44:58 +0000 (07:44 +0000)]
qlge: Set PCIe reset type for EEH to fundamental.
This device requires a fundamental reset when recovering from EEH.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ron Mercer [Fri, 6 Nov 2009 07:44:57 +0000 (07:44 +0000)]
qlge: Fix early exit from mbox cmd complete wait.
This line was accidentally left out of the previous commit #
da03945140a035a2962f7f93e359085596f20499 ("qlge: Fix firmware mailbox
command timeout.").
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Don Skidmore [Fri, 6 Nov 2009 12:56:20 +0000 (12:56 +0000)]
ixgbe: fix traffic hangs on Tx with ioatdma loaded
When ioatdma was loaded we we were unable to transmit traffic. We weren't
using the correct registers in ixgbe_update_tx_dca for 82599 systems.
Likewise in ixgbe_configure_tx() we weren't disabling the arbiter before
modifying MTQC.
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yi Zou [Fri, 6 Nov 2009 12:56:00 +0000 (12:56 +0000)]
ixgbe: Fix checking TFCS register for TXOFF status when DCB is enabled
When DCB is enabled, the ixgbe_check_tx_hang() should check the corresponding
TC's TXOFF in TFCS based on the TC that the tx ring belongs to. Adds a
function to map from the tx_ring hw reg_idx to the correspodning TC and read
TFCS accordingly.
Signed-off-by: Yi Zou <yi.zou@intel.com>
Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yi Zou [Fri, 6 Nov 2009 12:55:38 +0000 (12:55 +0000)]
ixgbe: Fix gso_max_size for 82599 when DCB is enabled
The 32k gso_max_size when DCB is enabled is for 82598 only, not for 82599.
Signed-off-by: Yi Zou <yi.zou@intel.com>
Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Finn Thain [Tue, 3 Nov 2009 03:42:40 +0000 (03:42 +0000)]
macsonic: fix crash on PowerBook 520
No-one seems to know where the PowerBook 500 series store their ethernet
MAC addresses. So, rather than crash, use a MAC address from the SONIC
CAM. Failing that, generate a random one.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Slaby [Thu, 5 Nov 2009 23:14:29 +0000 (23:14 +0000)]
NET: cassini, fix lock imbalance
Stanse found that one error path in cas_open omits to unlock pm_mutex.
Fix that.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sebastian Haas [Wed, 4 Nov 2009 05:48:33 +0000 (05:48 +0000)]
ems_usb: Fix byte order issues on big endian machines
CPC-USB is using a ARM7 core with little endian byte order. The "id" field
in can_msg needs byte order conversion from/to CPU byte order.
Signed-off-by: Sebastian Haas <haas@ems-wuensche.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ajit Khaparde [Fri, 6 Nov 2009 02:07:32 +0000 (02:07 +0000)]
be2net: Bug fix to send config commands to hardware after netdev_register
Sending config commands to be2 hardware before netdev_register is
completed, is sometimes causing the async link notification to arrive
even before the driver is ready to handle it. The commands for vlan
config and flow control settings can infact wait till be_open.
This patch takes care of that.
Signed-off-by: Ajit Khaparde <ajitk@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ajit Khaparde [Fri, 6 Nov 2009 02:06:59 +0000 (02:06 +0000)]
be2net: fix to set proper flow control on resume
If be2 goes into suspend after a user changes the flow control settings,
we are not programming them back after resume. This patch takes care of it.
We now get the flow control settings before going to suspend mode and
then apply them during resume.
Signed-off-by: Ajit Khaparde <ajitk@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 7 Nov 2009 02:21:44 +0000 (18:21 -0800)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-2.6
Jan Engelhardt [Sat, 7 Nov 2009 02:08:32 +0000 (18:08 -0800)]
netfilter: xt_connlimit: fix regression caused by zero family value
Commit v2.6.28-rc1~717^2~109^2~2 was slightly incomplete; not all
instances of par->match->family were changed to par->family.
References: http://bugzilla.netfilter.org/show_bug.cgi?id=610
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jeff Layton [Fri, 6 Nov 2009 19:18:49 +0000 (14:18 -0500)]
cifs: don't use CIFSGetSrvInodeNumber in is_path_accessible
Because it's lighter weight, CIFS tries to use CIFSGetSrvInodeNumber to
verify the accessibility of the root inode and then falls back to doing a
full QPathInfo if that fails with -EOPNOTSUPP. I have at least a report
of a server that returns NT_STATUS_INTERNAL_ERROR rather than something
that translates to EOPNOTSUPP.
Rather than trying to be clever with that call, just have
is_path_accessible do a normal QPathInfo. That call is widely
supported and it shouldn't increase the overhead significantly.
Cc: Stable <stable@kernel.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Jeff Layton [Fri, 6 Nov 2009 19:18:29 +0000 (14:18 -0500)]
cifs: clean up handling when server doesn't consistently support inode numbers
It's possible that a server will return a valid FileID when we query the
FILE_INTERNAL_INFO for the root inode, but then zeroed out inode numbers
when we do a FindFile with an infolevel of
SMB_FIND_FILE_ID_FULL_DIR_INFO.
In this situation turn off querying for server inode numbers, generate a
warning for the user and just generate an inode number using iunique.
Once we generate any inode number with iunique we can no longer use any
server inode numbers or we risk collisions, so ensure that we don't do
that in cifs_get_inode_info either.
Cc: Stable <stable@kernel.org>
Reported-by: Timothy Normand Miller <theosib@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Sean Cross [Thu, 5 Nov 2009 19:22:03 +0000 (20:22 +0100)]
rt2x00: Don't queue ieee80211 work after USB removal
This prevents the rt2x00 driver from queueing ieee80211 work after the
USB card has been removed, preventing a kernel panic.
Signed-off-by: Sean Cross <sean@chumby.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
John W. Linville [Fri, 6 Nov 2009 17:58:20 +0000 (12:58 -0500)]
Revert "ipw2200: fix oops on missing firmware"
This reverts commit
e6c5fc53d0f44a772398402ee8a1879818e42b4e.
Based on this regression report:
Date: Thu, 05 Nov 2009 15:59:16 +0100
From: Holger Schurig <holgerschurig@gmail.com>
To: linux-wireless@vger.kernel.org
Subject: BUG: oops when "rmmod ipw2200"
This happened on wireless-testing
v2.6.32-rc6-41575-g5e68bfb. I
modprobed ipw2200, put it into monitor mode, used tshark a while to
monitor, then I stopped tshark, "ifconfig eth2 down" and finally
"rmmod ipw2200", and voila:
[ 917.189620] ------------[ cut here ]------------
[ 917.189717] kernel BUG at net/wireless/core.c:543!
[ 917.189805] invalid opcode: 0000 [#1] PREEMPT SMP
[ 917.190002] last sysfs file: /sys/devices/pci0000:00/0000:00:1e.0/0000:02:0d.0/firmware/0000:02:0d.0/loading
[ 917.190136] Modules linked in: lib80211_crypt_wep ipw2200(-) libipw lib80211 ath5k mac80211 ath cfg80211 psmouse uhci_hcd
[ 917.190680]
[ 917.190759] Pid: 1763, comm: rmmod Not tainted (2.6.32-rc6-wl #26) Amilo M1425
[ 917.190886] EIP: 0060:[<
f8accf34>] EFLAGS:
00010202 CPU: 0
[ 917.190992] EIP is at wiphy_unregister+0xd3/0x175 [cfg80211]
[ 917.191083] EAX:
f601d4c4 EBX:
00000000 ECX:
00000000 EDX:
f79e8600
[ 917.191176] ESI:
f601d400 EDI:
f95b4350 EBP:
f6009eb4 ESP:
f6009e8c
[ 917.191269] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[ 917.191360] Process rmmod (pid: 1763, ti=
f6008000 task=
f79e8130 task.ti=
f6008000)
[ 917.191486] Stack:
[ 917.191562]
f601d5a0 f601d484 f6460e98 f6009ea0 c01407ee f6009eb8 00000246 f64604c0
[ 917.191916] <0>
f6460e5c f95b4350 f6009ec0 f94fd030 f6460e98 f6009edc f95a9d4f f787bc00
[ 917.192100] <0>
f787bc58 f787bc00 f95b4350 f95b4350 f6009ee8 c0207fca f787bc58 f6009ef8
[ 917.192100] Call Trace:
[ 917.192100] [<
c01407ee>] ? trace_hardirqs_on+0xb/0xd
[ 917.192100] [<
f94fd030>] ? unregister_ieee80211+0xe/0x27 [libipw]
[ 917.192100] [<
f95a9d4f>] ? ipw_pci_remove+0x59/0x227 [ipw2200]
[ 917.192100] [<
c0207fca>] ? pci_device_remove+0x19/0x39
[ 917.192100] [<
c02b93a4>] ? __device_release_driver+0x59/0x9d
[ 917.192100] [<
c02b944f>] ? driver_detach+0x67/0x85
[ 917.192100] [<
c02b88d6>] ? bus_remove_driver+0x69/0x85
[ 917.192100] [<
c02b9878>] ? driver_unregister+0x4d/0x54
[ 917.192100] [<
c02081c3>] ? pci_unregister_driver+0x28/0x71
[ 917.192100] [<
f95a9cf4>] ? ipw_exit+0x1c/0x1e [ipw2200]
[ 917.192100] [<
c0148e2b>] ? sys_delete_module+0x192/0x1ef
[ 917.192100] [<
c0162cdb>] ? remove_vma+0x52/0x58
[ 917.192100] [<
c01028bb>] ? sysenter_exit+0xf/0x18
[ 917.192100] [<
c0102888>] ? sysenter_do_call+0x12/0x36
[ 917.192100] Code: 74 07 e8 81 bc 8c c7 eb c8 8d 55 e0 89 f8 e8 d6 6d 66 c7 8b 45 dc 31 d2 e8 81 cc 8c c7 8d 86 c4 00 00 00 39 86 c4 00 00 00 74 04 <0f> 0b eb fe 8b 45 dc 8d 5e 0c e8 5a cc 8c c7 8b 86 94 03 00 00
[ 917.192100] EIP: [<
f8accf34>] wiphy_unregister+0xd3/0x175 [cfg80211] SS:ESP 0068:
f6009e8c
[ 917.203718] ---[ end trace
bcaaf449945a5100 ]---
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Jassi Brar [Fri, 6 Nov 2009 09:00:24 +0000 (18:00 +0900)]
ASoC: S3C64XX I2S: Enable audio-bus clock
Added the missing clk_enable after acquiring the 'audio-bus' clock.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Janusz Krzysztofik [Wed, 21 Oct 2009 21:10:03 +0000 (23:10 +0200)]
ASoC: OMAP: Don't try to set unsupported OMAP_DMA_DATA_BURST_16 on OMAP1
After DMA burst mode has been introduced in sound/soc/omap/omap-pcm.c,
omap_pcm_prepare() unconditionally calls:
omap_set_dma_src_burst_mode(prtd->dma_ch, OMAP_DMA_DATA_BURST_16);
omap_set_dma_dest_burst_mode(prtd->dma_ch, OMAP_DMA_DATA_BURST_16);
Current implementation of those two functions found in
arch/arm/plat-ompa/dma.c doesn't support OMAP_DMA_DATA_BURST_16 on OMAP1 at
all, so they both end with BUG() on that machine. That results in
ASoC being completely unusable, at least on my OMAP5910 based Amstrad Delta.
The patch corrects the problem by not calling those two functions when run on
OMAP1 class based machines.
Created against linux-2.6.32-rc5.
Tested on Amstrad Delta.
Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Acked-by: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
David S. Miller [Fri, 6 Nov 2009 12:52:50 +0000 (04:52 -0800)]
Revert "ide: try to use PIO Mode 0 during probe if possible"
This reverts commit
6029336426a2b43e4bc6f4a84be8789a047d139e.
Ok, we really do need to revert this, even with Bart's sis5513.c
fix in there.
The problem is that several driver's ->set_pio_mode() method
depends upon the drive->media type being set properly. Most
of them use this to enable prefetching, which can only be done
for disk media.
But the commit being reverted here calls ->set_pio_mode() before
it's setup. Actually it considers everything disk because that
is the default media type set by ide_port_init_devices_data().
The set of drivers that depend upon the media type in their
->set_pio_method() are:
drivers/ide/alim15x3.c
drivers/ide/it8172.c
drivers/ide/it8213.c
drivers/ide/pdc202xx_old.c
drivers/ide/piix.c
drivers/ide/qd65xx.c
drivers/ide/sis5513.c
drivers/ide/slc90e66.c
And it is possible that we could fix this by guarding the prefetching
and other media dependent setting changes with a test on
IDE_PFLAG_PROBING in hwif->port_flags, that's simply too risky for
2.6.32-rcX and -stable.
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 6 Nov 2009 08:50:39 +0000 (00:50 -0800)]
decnet: netdevice refcount leak
While working on device refcount stuff, I found a device refcount leak
through DECNET.
This nasty bug can be used to hold refcounts on any !DECNET netdevice.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jozsef Kadlecsik [Fri, 6 Nov 2009 08:43:42 +0000 (00:43 -0800)]
netfilter: nf_nat: fix NAT issue in 2.6.30.4+
Vitezslav Samel discovered that since 2.6.30.4+ active FTP can not work
over NAT. The "cause" of the problem was a fix of unacknowledged data
detection with NAT (commit
a3a9f79e361e864f0e9d75ebe2a0cb43d17c4272).
However, actually, that fix uncovered a long standing bug in TCP conntrack:
when NAT was enabled, we simply updated the max of the right edge of
the segments we have seen (td_end), by the offset NAT produced with
changing IP/port in the data. However, we did not update the other parameter
(td_maxend) which is affected by the NAT offset. Thus that could drift
away from the correct value and thus resulted breaking active FTP.
The patch below fixes the issue by *not* updating the conntrack parameters
from NAT, but instead taking into account the NAT offsets in conntrack in a
consistent way. (Updating from NAT would be more harder and expensive because
it'd need to re-calculate parameters we already calculated in conntrack.)
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sathya Perla [Fri, 6 Nov 2009 08:31:01 +0000 (00:31 -0800)]
be2net: Fix CQE_STATUS_EXTD_SHIFT define
Signed-off-by: Sathya Perla <sathyap@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paul Mundt [Fri, 6 Nov 2009 08:23:33 +0000 (17:23 +0900)]
sh: unwinder: Fix up invalid PC refetch in dwarf unwinder.
The dwarf unwinder presently attempts to provide a sane PC value if none
is provided, however the logic is broken and cases where a previous valid
dwarf frame exists along with a bogus PC value can still proceed. This
fixes up the test and prevents the unwinder from blowing up.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Magnus Damm [Thu, 5 Nov 2009 14:34:57 +0000 (14:34 +0000)]
serial: sh-sci: disable callback typo fix
Avoid invoking the disable callback in case of NULL.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Len Brown [Fri, 6 Nov 2009 06:45:11 +0000 (01:45 -0500)]
Merge branch 'bugzilla-13449' into release
Eric Dumazet [Fri, 6 Nov 2009 04:56:07 +0000 (20:56 -0800)]
rose: device refcount leak
While hunting dev_put() for net-next-2.6, I found a device refcount
leak in ROSE, ioctl(SIOCADDRT) error path.
Fix is to not touch device refcount, as we hold RTNL
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephen Hemminger [Fri, 6 Nov 2009 04:46:52 +0000 (20:46 -0800)]
bridge: prevent bridging wrong device
The bridge code assumes ethernet addressing, so be more strict in
the what is allowed. This showed up when GRE had a bug and was not
using correct address format.
Add some more comments for increased clarity.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 6 Nov 2009 04:24:33 +0000 (20:24 -0800)]
sparc64: Add a comment about why we only use certain memory barriers these days.
Based upon feedback from Mathieu Desnoyers.
Signed-off-by: David S. Miller <davem@davemloft.net>
Vaibhav Verma [Fri, 6 Nov 2009 04:13:36 +0000 (23:13 -0500)]
ACPI: sleep: another HP/Compaq DMI entries for init_set_sci_en_on_resume
http://bugzilla.kernel.org/show_bug.cgi?id=13745
Signed-off-by: Len Brown <len.brown@intel.com>
Gustavo Maciel Dias Vieira [Mon, 19 Oct 2009 11:41:53 +0000 (09:41 -0200)]
ACPI: add DMI entry for SCI_EN resume quirk on HP dv4
Fixes the missing battery on sleep problem for yet another HP laptop
("HP Pavilion dv4").
Fixes:
http://bugzilla.kernel.org/show_bug.cgi?id=13449
Signed-off-by: Gustavo Maciel Dias Vieira <gustavo@sagui.org>
Signed-off-by: Len Brown <len.brown@intel.com>
NeilBrown [Fri, 6 Nov 2009 03:59:29 +0000 (14:59 +1100)]
md/raid5: make sure curr_sync_completes is uptodate when reshape starts
This value is visible through sysfs and is used by mdadm
when it manages a reshape (backing up data that is about to be
rearranged). So it is important that it is always correct.
Current it does not get updated properly when a reshape
starts which can cause problems when assembling an array
that is in the middle of being reshaped.
This is suitable for 2.6.31.y stable kernels.
Cc: stable@kernel.org
Signed-off-by: NeilBrown <neilb@suse.de>
NeilBrown [Fri, 6 Nov 2009 03:59:27 +0000 (14:59 +1100)]
md: don't clear endpoint for resync when resync is interrupted.
If a 'sync_max' has been set (via sysfs), it is wrong to clear it
until a resync (or reshape or recovery ...) actually reached that
point.
So if a resync is interrupted (e.g. by device failure),
leave 'resync_max' unchanged.
This is particularly important for 'reshape' operations that do not
change the size of the array. For such operations mdadm needs to
monitor the reshape taking rolling backups of the section being
reshaped. If resync_max gets cleared, the reshape can get ahead of
mdadm and then the backups that mdadm creates are useless.
This is suitable for 2.6.31.y stable kernels.
Cc: stable@kernel.org
Signed-off-by: NeilBrown <neilb@suse.de>
Len Brown [Thu, 5 Nov 2009 23:31:18 +0000 (18:31 -0500)]
Merge branches 'misc', 'eeepc-laptop' and 'bugzilla-14445' into release
Frans Pop [Mon, 26 Oct 2009 07:39:00 +0000 (08:39 +0100)]
thermal: sysfs-api.txt - document passive attribute for thermal zones
Signed-off-by: Frans Pop <elendil@planet.nl>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
Frans Pop [Mon, 26 Oct 2009 07:38:59 +0000 (08:38 +0100)]
thermal: sysfs-api.txt - reformat for improved readability
The document currently uses large indentations which make the text
too wide for easy readability. Also improve general consistency.
Signed-off-by: Frans Pop <elendil@planet.nl>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
Amit Kucheria [Fri, 16 Oct 2009 09:46:02 +0000 (12:46 +0300)]
acpi: thermal: Add EOL to the trip_point_N_type strings
Make the trip_point_N_type sysfs files return a string ending in EOL for
consistency with other sysfs files.
Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
Julia Lawall [Sat, 17 Oct 2009 06:34:39 +0000 (08:34 +0200)]
ACPI: Move dereference after NULL test
If the NULL test on pr is needed, then the dereference should be after the
NULL test.
A simplified version of the semantic match that detects this problem is as
follows (http://coccinelle.lip6.fr/):
// <smpl>
@match exists@
expression x, E;
identifier fld;
@@
* x->fld
... when != \(x = E\|&x\)
* x == NULL
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
Bob Moore [Thu, 22 Oct 2009 01:11:11 +0000 (09:11 +0800)]
ACPICA: avoid "Info: mapping multiple BARs. Your kernel is fine."
Ensure that memory mappings created for operation regions
do not cross page boundaries. Crossing a page boundary
while mapping regions can cause warnings if the pages have different attributes.
Such regions are probably BIOS bugs, and this is the workaround.
http://bugzilla.kernel.org/show_bug.cgi?id=14445
[Kernel summit hacking hour]
Signed-off-by: Bob Moore <robert.moore@intel.com>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Rakib Mullick [Thu, 5 Nov 2009 21:51:40 +0000 (16:51 -0500)]
ACPI: add __cpuinit to acpi_processor_add()
Annote acpi_processor_add with cpuinit since it calls a cpuinit function
acpi_processor_power_init and fixes a section mismatch warning.
We were warned by the following warning:
LD drivers/acpi/processor.o
WARNING: drivers/acpi/processor.o(.text+0x1829): Section mismatch in
reference from the function acpi_processor_add() to the function
.cpuinit.text:acpi_processor_power_init()
The function acpi_processor_add() references
the function __cpuinit acpi_processor_power_init().
This is often because acpi_processor_add lacks a __cpuinit
annotation or the annotation of acpi_processor_power_init is wrong.
Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
projects / GitHub / exynos8895 / android_kernel_samsung_universal8895.git / log