GitHub/exynos8895/android_kernel_samsung_universal8895.git
12 years agoixgbe: Make certain that all frames fit minimum size requirements
Alexander Duyck [Wed, 8 Feb 2012 07:50:40 +0000 (07:50 +0000)]
ixgbe: Make certain that all frames fit minimum size requirements

This change makes certain that any packet we attempt to transmit will meet
minimum size requirements for the hardware.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
12 years agoixgbe: cleanup logic in ixgbe_change_mtu
Alexander Duyck [Wed, 8 Feb 2012 07:50:35 +0000 (07:50 +0000)]
ixgbe: cleanup logic in ixgbe_change_mtu

This change is meant to just cleanup the logic in ixgbe_change_mtu since we
are making it unnecessarily complex due to a workaround required for 82599
when SR-IOV is enabled.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
12 years agoixgbe: Replace standard receive path with a page based receive
Alexander Duyck [Sat, 3 Mar 2012 02:35:52 +0000 (02:35 +0000)]
ixgbe: Replace standard receive path with a page based receive

This patch replaces the existing Rx hot-path in the ixgbe driver with a new
implementation that is based on performing a double buffered receive.  The
ixgbe driver already had something similar in place for its' packet split
path, however in that case we were still receiving the header for the
packet into the sk_buff.  The big change here is the entire receive path
will receive into pages only, and then pull the header out of the page and
copy it into the sk_buff data.  There are several motivations behind this
approach.

First, this allows us to avoid several cache misses as we were taking a
set of cache misses for allocating the sk_buff and then another set for
receiving data into the sk_buff.  We are able to avoid these misses on
receive now as we allocate the sk_buff when data is available.

Second we are able to see a considerable performance gain when an IOMMU is
enabled because we are no longer unmapping every buffer on receive.
Instead we can delay the unmap until we are unable to use the page, and
instead we can simply call sync_single_range on the half of the page that
contains new data.

Finally we are able to drop a considerable amount of code from the driver
as we no longer have to support 2 different receive modes, packet split and
one buffer.  This allows us to optimize the Rx path further since less
branching is required.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
12 years agoixgbe: Support RX-ALL feature flag.
Ben Greear [Thu, 8 Mar 2012 08:28:41 +0000 (08:28 +0000)]
ixgbe: Support RX-ALL feature flag.

This allows the NIC to receive all frames available, including
those with bad FCS, ethernet control frames, and more.

Tested by sending frames with bad FCS.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
12 years agoixgbe: Support sending custom Ethernet FCS.
Ben Greear [Tue, 6 Mar 2012 09:42:04 +0000 (09:42 +0000)]
ixgbe: Support sending custom Ethernet FCS.

Including bad FCS, used generate frames with bad FCS
to test other system's handling of RX of bad packets.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
12 years agoigb: Support RX-ALL feature flag.
Ben Greear [Tue, 6 Mar 2012 09:41:58 +0000 (09:41 +0000)]
igb: Support RX-ALL feature flag.

This allows the NIC to receive all frames available, including
those with bad FCS, un-matched vlans, ethernet control frames,
and more.

Tested by sending frames with bad FCS.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
12 years agoigb: Support sending custom Ethernet FCS.
Ben Greear [Tue, 6 Mar 2012 09:41:53 +0000 (09:41 +0000)]
igb: Support sending custom Ethernet FCS.

Including bad FCS, used generate frames with bad FCS
to test other system's handling of RX of bad packets.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
12 years agoeni: fix driver remove function and driver probe error path.
françois romieu [Fri, 16 Mar 2012 01:52:04 +0000 (01:52 +0000)]
eni: fix driver remove function and driver probe error path.

- add eni_do_release() to balance eni_do_init
- turn the zeroes DMA area into a per device data

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet/irda: add clk_prepare/clk_unprepare to pxaficp_ir
Philipp Zabel [Thu, 15 Mar 2012 08:19:29 +0000 (08:19 +0000)]
net/irda: add clk_prepare/clk_unprepare to pxaficp_ir

This patch adds clk_prepare/clk_unprepare calls to the pxaficp_ir
driver by using the helper functions clk_prepare_enable and
clk_disable_unprepare.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Haojian Zhuang <haojian.zhuang@marvell.com>
Cc: Samuel Ortiz <samuel@sortiz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoarp: allow arp processing to honor per interface arp_accept sysctl
Neil Horman [Thu, 15 Mar 2012 05:25:58 +0000 (05:25 +0000)]
arp: allow arp processing to honor per interface arp_accept sysctl

I found recently that the arp_process function which handles all of our received
arp frames, is using IPV4_DEVCONF_ALL macro to check the state of the arp_process
flag.  This seems wrong, as it implies that either none or all of the network
interfaces accept gratuitous arps.  This patch corrects that, allowing
per-interface arp_accept configuration to deviate from the all setting.  Note
this also brings us into line with the way the arp_filter setting is handled
during arp_process execution.

Tested this myself on my home network, and confirmed it works as expected.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: "David S. Miller" <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agousbnet: use netif_tx_wake_queue instead of netif_start_queue
Alexey Orishko [Wed, 14 Mar 2012 04:00:24 +0000 (04:00 +0000)]
usbnet: use netif_tx_wake_queue instead of netif_start_queue

If host is going to autosuspend function with two interfaces and
if IP packet has arrived in-between of two usbnet_suspend() callbacks,
i.e usbnet_resume() is called in-between, tx data flow is stopped.
When autosuspend timer expires and device is put to autosuspend
again, tx queue is waked up and data can be sent again.
This behavior might be repeated several times in a row.

Tested on Intel/ARM.

Reviewed-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Tested-by: Dmitry Tarnyagin <dmitry.tarnyagin@stericsson.com>
Signed-off-by: Alexey Orishko <alexey.orishko@stericsson.com>
Acked-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agostmmac: Add device-tree support
Stefan Roese [Tue, 13 Mar 2012 04:56:37 +0000 (04:56 +0000)]
stmmac: Add device-tree support

This patch adds support to configure the STMMAC ethernet driver via
device-tree instead of platform_data.

Currently, only the properties needed on SPEAr600 are provided. All
other properties should be added once needed on other platforms.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonetxen: qlogic ethernet : Fix endian bug.
Santosh Nayak [Mon, 12 Mar 2012 22:58:24 +0000 (22:58 +0000)]
netxen: qlogic ethernet : Fix endian bug.

Change the datatype of "ip_addr" to __be32 as 'ip' should be in
big endian format.

Adapter needs "ip address" in big endian format stored at lower 32bit
of req.word[1]. netxen_config_ipaddr() now receives 'ip' in big endian
format. To satisfy adapter's need, use memcpy() to copy byte by byte
of 'ip' into lower 32bit of req.word[1].

Mac address and serial number of adapter need to be in little endian format.
Change the data type of the related  variables to __le32 / __le64 or cast it
explicitly to __le32 / __le64 depending upon the requirement.

Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agopxa168: remove unused stats member.
Rami Rosen [Fri, 16 Mar 2012 05:19:36 +0000 (05:19 +0000)]
pxa168: remove unused stats member.

The patch removes unused stats member in pxa168 network driver.

Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
John W. Linville [Fri, 16 Mar 2012 17:45:25 +0000 (13:45 -0400)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-next into for-davem

Conflicts:
drivers/net/wireless/ath/ath9k/hw.c

12 years agocdc_ncm: avoid discarding datagrams in rx path
Alexey Orishko [Wed, 14 Mar 2012 11:26:12 +0000 (11:26 +0000)]
cdc_ncm: avoid discarding datagrams in rx path

Changes:
- removed a limit for amount of datagrams for IN NTB
- using pointer to traverse NTB in rx_fixup()
- renamed "temp" to "len" in rx_fixup()
- do NTB sequence number check in rx path
Tested on Intel/ARM.

Reviewed-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Tested-by: Dmitry Tarnyagin <Dmitry.Tarnyagin@stericsson.com>
Signed-off-by: Alexey Orishko <alexey.orishko@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agocdc_ncm: fix MTU and max_datagram_size handling
Alexey Orishko [Wed, 14 Mar 2012 11:26:11 +0000 (11:26 +0000)]
cdc_ncm: fix MTU and max_datagram_size handling

Changes/fixes:
- inform device if max_datagram_size was changed by host
- max_datagram_size can't be bigger MTU in ETH func descr
- fix constants definitions to enable running CAIF service over NCM

Tested on Intel/ARM.

Reviewed-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Tested-by: Dmitry Tarnyagin <Dmitry.Tarnyagin@stericsson.com>
Signed-off-by: Alexey Orishko <alexey.orishko@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agocdc_ncm: reduce driver latency in the data path
Alexey Orishko [Wed, 14 Mar 2012 11:26:10 +0000 (11:26 +0000)]
cdc_ncm: reduce driver latency in the data path

Changes:
- use high resolution timer
  latency became approx. 10-15 times less than before
- use taklet for sending remaining data in tx path
Tested on Intel/ARM.

Reviewed-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Tested-by: Dmitry Tarnyagin <Dmitry.Tarnyagin@stericsson.com>
Signed-off-by: Alexey Orishko <alexey.orishko@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoasix: asix_rx_fixup surgery to reduce skb truesizes
Eric Dumazet [Wed, 14 Mar 2012 20:18:32 +0000 (20:18 +0000)]
asix: asix_rx_fixup surgery to reduce skb truesizes

asix_rx_fixup() is complex, and does some unnecessary memory copies (at
least on x86 where NET_IP_ALIGN is 0)

Also, it tends to provide skbs with a big truesize (4096+256 with
MTU=1500) to upper stack, so incoming trafic consume a lot of memory and
I noticed early packet drops because we hit socket rcvbuf too fast.

Switch to a different strategy, using copybreak so that we provide nice
skbs to upper stack (including the NET_SKB_PAD to avoid future head
reallocations in some paths)

With this patch, I no longer see packets drops or tcp collapses on
various tcp workload with a AX88772 adapter.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Aurelien Jacobs <aurel@gnuage.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Trond Wuellner <trond@chromium.org>
Cc: Grant Grundler <grundler@chromium.org>
Cc: Paul Stewart <pstew@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoMerge branch 'master' of git://gitorious.org/linux-can/linux-can-next
David S. Miller [Thu, 15 Mar 2012 21:34:07 +0000 (14:34 -0700)]
Merge branch 'master' of git://gitorious.org/linux-can/linux-can-next

12 years agolibertas: remove dump_survey implementation
Daniel Drake [Wed, 14 Mar 2012 22:34:33 +0000 (22:34 +0000)]
libertas: remove dump_survey implementation

libertas provides a dump_survey implementation based on reading of
a RSSI value. However, this RSSI value is calculated based on the
last received beacon from the associated AP - it is not a good
way of surveying a channel in general, and even causes an error
if the card is not associated to a network.

As this is not appropriate as a survey, remove it. This fixes an
issue where something in userspace is repeatedly calling site-survey
during boot, resulting in many repeated errors as the RSSI value cannot
be read before associating.

Signed-off-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k_hw: remove unused initvals
Felix Fietkau [Wed, 14 Mar 2012 15:40:34 +0000 (16:40 +0100)]
ath9k_hw: remove unused initvals

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k: inline AR9271 1.0 INI overrides
Felix Fietkau [Wed, 14 Mar 2012 15:40:33 +0000 (16:40 +0100)]
ath9k: inline AR9271 1.0 INI overrides

Makes them more readable and reduces code size

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k_hw: remove iniModes_*_tx_gain_9271
Felix Fietkau [Wed, 14 Mar 2012 15:40:32 +0000 (16:40 +0100)]
ath9k_hw: remove iniModes_*_tx_gain_9271

Program tx gain through iniModesTxGain like on AR9287

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k_hw: clean up iniModesAdditional
Felix Fietkau [Wed, 14 Mar 2012 15:40:31 +0000 (16:40 +0100)]
ath9k_hw: clean up iniModesAdditional

use iniModesFastClock for 5 ghz fast clock specific settings, and
iniAdditional for clock/chip specific initval overrides

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k_hw: fix AR9380 register settings for channel 14
Felix Fietkau [Wed, 14 Mar 2012 15:40:30 +0000 (16:40 +0100)]
ath9k_hw: fix AR9380 register settings for channel 14

Program the ah->ini_japan2484 INI values which were left out by accident

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k_hw: fold ar9002_hw_cck_chan14_spread into mode regs initialization
Felix Fietkau [Wed, 14 Mar 2012 15:40:29 +0000 (16:40 +0100)]
ath9k_hw: fold ar9002_hw_cck_chan14_spread into mode regs initialization

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k_hw: remove iniCommon_*_cck_fir_coeff_9271
Felix Fietkau [Wed, 14 Mar 2012 15:40:28 +0000 (16:40 +0100)]
ath9k_hw: remove iniCommon_*_cck_fir_coeff_9271

These arrays are unused

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k_hw: clean up ath9k_hw_setuprxdesc
Felix Fietkau [Wed, 14 Mar 2012 15:40:27 +0000 (16:40 +0100)]
ath9k_hw: clean up ath9k_hw_setuprxdesc

The ATH9K_HW_CAP_AUTOSLEEP check is bogus, the rx status area needs to be
cleared on all non-EDMA PCI/AHB based chipsets anyway.
Limit the memset to the rx status area to improve performance.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k_hw: remove ath9k_hw_gettxintrtxqs
Felix Fietkau [Wed, 14 Mar 2012 15:40:26 +0000 (16:40 +0100)]
ath9k_hw: remove ath9k_hw_gettxintrtxqs

The driver can just check the mask directly

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k: optimize register access functions
Felix Fietkau [Wed, 14 Mar 2012 15:40:25 +0000 (16:40 +0100)]
ath9k: optimize register access functions

By checking for NR_CPUS, the compiler can optimize out register access
serialization code on non-SMP kernels

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k_hw: remove ath9k_hw_getdefantenna
Felix Fietkau [Wed, 14 Mar 2012 15:40:24 +0000 (16:40 +0100)]
ath9k_hw: remove ath9k_hw_getdefantenna

The default antenna (as programmed by the INI file) is always 0 anyway.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k_hw: remove ath9k_hw_htc_resetinit
Felix Fietkau [Wed, 14 Mar 2012 15:40:23 +0000 (16:40 +0100)]
ath9k_hw: remove ath9k_hw_htc_resetinit

Automatically set the ah->htc_reset_init on init and after PHY disable.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k_hw: clean up tx completion interrupt handling
Felix Fietkau [Wed, 14 Mar 2012 15:40:22 +0000 (16:40 +0100)]
ath9k_hw: clean up tx completion interrupt handling

TXQ_FLAG_TXOKINT_ENABLE and TXQ_FLAG_TXERRINT_ENABLE are always set and
used together, and they share the same bitmask in enum ath9k_tx_queue_flags.
Simplify the code that tests for these flags.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k_hw: simplify tx queue interrupt mask handling
Felix Fietkau [Wed, 14 Mar 2012 15:40:21 +0000 (16:40 +0100)]
ath9k_hw: simplify tx queue interrupt mask handling

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomac80211: make uapsd_* keys per-vif
Eliad Peller [Wed, 14 Mar 2012 14:15:03 +0000 (16:15 +0200)]
mac80211: make uapsd_* keys per-vif

uapsd_queues and uapsd_max_sp_len are relevant only for managed
interfaces, and can be configured differently for each vif.

Move them from the local struct to sdata->u.mgd, and update
the debugfs functions accordingly.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomac80211: add NULL terminator to debugfs_netdev write buf
Eliad Peller [Wed, 14 Mar 2012 14:15:02 +0000 (16:15 +0200)]
mac80211: add NULL terminator to debugfs_netdev write buf

Some debugfs write functions call kstrto* functions, which
assume the string is null-terminated. Make it valid by changing
ieee80211_if_write() to use static buffer instead of allocating
one, and set the last char to NULL.

(The write functions try to parse some integer/mac address,
so 64 bytes buffer should be enough)

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomac80211: Don't sample max throughput rate in minstrel_ht
Helmut Schaa [Wed, 14 Mar 2012 12:31:11 +0000 (13:31 +0100)]
mac80211: Don't sample max throughput rate in minstrel_ht

The current max throughput rate is known to be good as otherwise it
wouldn't be the max throughput rate. Since rate sampling can introduce
some overhead (by adding RTS for example or due to not aggregating the
frame) don't sample the max throughput rate.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Acked-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agort2x00: rt2800usb: limit tx queues length
Stanislaw Gruszka [Wed, 14 Mar 2012 10:16:21 +0000 (11:16 +0100)]
rt2x00: rt2800usb: limit tx queues length

TX status fifo is limited to 16 elements. When we send more frames than
that, we can easily loose status, what is not good for rate scaling
algorithm.

On my testing the change does not degrade performance, actually make
is slightly better. Additionally with the patch I can see much less
various rt2x00 warnings in dmesg.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agort2x00: rt2800usb: do not check packedid for aggregated frames
Stanislaw Gruszka [Wed, 14 Mar 2012 10:16:20 +0000 (11:16 +0100)]
rt2x00: rt2800usb: do not check packedid for aggregated frames

Tx statuses of aggregated subframes contain packetid of first subframe
in the AMPDU. We can not identify AMPDU subframes based on packedid, so
simply assume that status match first pending frame in the queue. Thats
mostly the same what 2800pci do.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agort2x00: rt2800usb: rework txstatus code
Stanislaw Gruszka [Wed, 14 Mar 2012 10:16:19 +0000 (11:16 +0100)]
rt2x00: rt2800usb: rework txstatus code

Currently we read tx status register after each urb data transfer. As
callback procedure also trigger reading, that causing we have many
"threads" of reading status. To prevent that introduce TX_STATUS_READING
flags, and check if we are already in process of sequential reading
TX_STA_FIFO, before requesting new reads.

Change timer to hrtimer, that make TX_STA_FIFO overruns less possible.
Use 200 us for initial timeout, and then reschedule in 100 us period,
this values probably have to be tuned.

Make changes on txdone work. Schedule it from
rt2800usb_tx_sta_fifo_read_completed() callback when first valid status
show up. Check in callback if tx status timeout happens, and schedule
work on that condition too. That make possible to remove tx status
timeout from generic watchdog. I moved that to rt2800usb.

Loop in txdone work, that should prevent situation when we queue work,
which is already processed, and after finish work is not rescheduled
again.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agort2x00: rt2800usb: rework txdone code
Stanislaw Gruszka [Wed, 14 Mar 2012 10:16:18 +0000 (11:16 +0100)]
rt2x00: rt2800usb: rework txdone code

Patch change txdone code to make it similar like txdone in rt2800pci,
process only one entry from queue matching tx status.

Before we processed all pending entries from queue until PACKEDID match,
that caused that we do not report tx statuses correctly.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agort2x00: rt2800usb: move additional txdone into new function
Stanislaw Gruszka [Wed, 14 Mar 2012 10:16:17 +0000 (11:16 +0100)]
rt2x00: rt2800usb: move additional txdone into new function

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k: Fix multi-VIF BSS handling
Sujith Manoharan [Wed, 14 Mar 2012 09:11:05 +0000 (14:41 +0530)]
ath9k: Fix multi-VIF BSS handling

mac80211 provides short preamble information and ERP protection
information on a per-BSS basis, which can be used. Remove flags
stored in the driver, which was incorrect since they were being used
in a global manner.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k: Remove aggregation flags
Sujith Manoharan [Wed, 14 Mar 2012 09:10:58 +0000 (14:40 +0530)]
ath9k: Remove aggregation flags

SC_OP_TXAGGR and SC_OP_RXAGGR are not really needed.
The HT capabilities of the station and HW can be used instead.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k_hw: Cleanup FastChannelChange
Sujith Manoharan [Wed, 14 Mar 2012 09:10:46 +0000 (14:40 +0530)]
ath9k_hw: Cleanup FastChannelChange

The logic to determine whether to use FCC is a bit convoluted.
Use a small helper function to decide whether FCC is to be
used.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k: Remove 'other' VIF count
Sujith Manoharan [Wed, 14 Mar 2012 09:10:38 +0000 (14:40 +0530)]
ath9k: Remove 'other' VIF count

It is not needed and will not be used anyway since
unsupported interfaces are not allowed to be created.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k: Remove unused variables
Sujith Manoharan [Wed, 14 Mar 2012 09:10:31 +0000 (14:40 +0530)]
ath9k: Remove unused variables

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k: Remove unnecessary initialization
Sujith Manoharan [Wed, 14 Mar 2012 09:10:20 +0000 (14:40 +0530)]
ath9k: Remove unnecessary initialization

There is no need to mask out SWBA/BMISS from the
interrupt mask in start().

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agort2x00: Set IEEE80211_HW_REPORTS_TX_ACK_STATUS in rt2800
Helmut Schaa [Wed, 14 Mar 2012 07:56:47 +0000 (08:56 +0100)]
rt2x00: Set IEEE80211_HW_REPORTS_TX_ACK_STATUS in rt2800

rt2800 already reports the tx ack status of each frame back to mac80211.
Advertise this by setting IEEE80211_HW_REPORTS_TX_ACK_STATUS for rt2800.
This allows some mac80211 features like frame loss notifications to work
with rt2800.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomwifiex: correction in structure name passed to sizeof()
Amitkumar Karwar [Wed, 14 Mar 2012 02:36:49 +0000 (19:36 -0700)]
mwifiex: correction in structure name passed to sizeof()

"hscfg" is declared as struct mwifiex_ds_hs_cfg. Use same structure
name for calculating it's size.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomwifiex: fix checkpatch --strict warnings/errors Part 9
Yogesh Ashok Powar [Wed, 14 Mar 2012 02:22:42 +0000 (19:22 -0700)]
mwifiex: fix checkpatch --strict warnings/errors Part 9

For files sta_rx.c, sta_tx.c, txrx.c, util.c and wmm.c

Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomwifiex: fix checkpatch --strict warnings/errors Part 8
Yogesh Ashok Powar [Wed, 14 Mar 2012 02:22:41 +0000 (19:22 -0700)]
mwifiex: fix checkpatch --strict warnings/errors Part 8

For files sta_event.c and sta_ioctl.c

Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomwifiex: fix checkpatch --strict warnings/errors Part 7
Yogesh Ashok Powar [Wed, 14 Mar 2012 02:22:40 +0000 (19:22 -0700)]
mwifiex: fix checkpatch --strict warnings/errors Part 7

For sta_cmd.c and sta_cmdresp.c

Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomwifiex: fix checkpatch --strict warnings/errors Part 6
Yogesh Ashok Powar [Wed, 14 Mar 2012 02:22:39 +0000 (19:22 -0700)]
mwifiex: fix checkpatch --strict warnings/errors Part 6

For file sdio.c

Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomwifiex: fix checkpatch --strict warnings/errors Part 5
Yogesh Ashok Powar [Wed, 14 Mar 2012 02:22:38 +0000 (19:22 -0700)]
mwifiex: fix checkpatch --strict warnings/errors Part 5

For file scan.c

Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomwifiex: fix checkpatch --strict warnings/errors Part 4
Yogesh Ashok Powar [Wed, 14 Mar 2012 02:22:37 +0000 (19:22 -0700)]
mwifiex: fix checkpatch --strict warnings/errors Part 4

For files main.c, main.h and pcie.c

Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomwifiex: fix checkpatch --strict warnings/errors Part 3
Yogesh Ashok Powar [Wed, 14 Mar 2012 02:22:36 +0000 (19:22 -0700)]
mwifiex: fix checkpatch --strict warnings/errors Part 3

For files fw.h, init.c and join.c

Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomwifiex: fix checkpatch --strict warnings/errors Part 2
Yogesh Ashok Powar [Wed, 14 Mar 2012 02:22:35 +0000 (19:22 -0700)]
mwifiex: fix checkpatch --strict warnings/errors Part 2

For files cfg80211.c, cfp.c, and cmdevt.c

Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomwifiex: fix checkpatch --strict warnings/errors Part 1
Yogesh Ashok Powar [Wed, 14 Mar 2012 02:22:34 +0000 (19:22 -0700)]
mwifiex: fix checkpatch --strict warnings/errors Part 1

For files 11n.c, 11n.h, 11n_aggr.c, 11n_rxreorder.c

Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoixgbe: dcb: use DCB config values for FCoE traffic class on open
John Fastabend [Sat, 11 Feb 2012 06:26:00 +0000 (06:26 +0000)]
ixgbe: dcb: use DCB config values for FCoE traffic class on open

Disabling and enabling DCB can cause FCoE hardware initialization to
occur on the incorrect traffic class when the up2tc mapping has not
yet been reconfigured.

Fix this by using the DCB configuration maps that are correct
and will be pushed at mqprio after DCB driver setup completes
successfully.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Tested-by: Marcus Dennis <marcusx.e.dennis@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
12 years agoixgbe: Fix race condition where RX buffer could become corrupted.
Atita Shirwaikar [Sat, 18 Feb 2012 02:58:58 +0000 (02:58 +0000)]
ixgbe: Fix race condition where RX buffer could become corrupted.

There was a race condition in the reset path where the RX buffer
could become corrupted during Fdir configuration.This is due to
a HW bug.The fix right now is to lock the buffer while we do the
fdir configuration.Since we were using similar workaround for another bug,
I moved the existing code to a function and reused it.HW team also recommended
that IXGBE_MAX_SECRX_POLL value be changed from 30 to 40.The erratum for this
bug will be published in the next release 82599 Spec Update

Signed-off-by: Atita Shirwaikar <atita.shirwaikar@intel.com>
Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
12 years agoixgbe: use typed min/max functions where possible
Jesse Brandeburg [Fri, 10 Feb 2012 10:20:02 +0000 (10:20 +0000)]
ixgbe: use typed min/max functions where possible

using the form min((int)var, ver)) is replaced by min_t(int, ...)

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
12 years agoixgbe: fix obvious return value bug.
Don Skidmore [Fri, 17 Feb 2012 07:38:13 +0000 (07:38 +0000)]
ixgbe: fix obvious return value bug.

This is clearly a typeo where we are not checking the return value from
get_link_capabilities but should.  This patch corrects that.

Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
12 years agoixgbe: Replace eitr_low and eitr_high with static values in ixgbe_update_itr
Alexander Duyck [Wed, 8 Feb 2012 07:50:20 +0000 (07:50 +0000)]
ixgbe: Replace eitr_low and eitr_high with static values in ixgbe_update_itr

There isn't much point in using variables to store the values of eitr_low
and eitr_high since they are not user changeable.  As such I am replacing
them with the constants 10 and 20 in order to avoid any confusion on what
the values actually are.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
12 years agoixgbe: Do not disable read relaxed ordering when DCA is enabled
Alexander Duyck [Wed, 8 Feb 2012 07:50:14 +0000 (07:50 +0000)]
ixgbe: Do not disable read relaxed ordering when DCA is enabled

A previous fix had gone though and disabled relaxed ordering for Rx
descriptor read fetching.  This was not necessary as this functions
correctly and has no ill effects on the system.

In addition several of the defines used for the DCA control registers were
incorrect in that they indicated descriptor effects when they actually had
an impact on either data or header write back.  As such I have update these
to correctly reflect either DATA or HEAD.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
12 years agoixgb: Remove unnecessary defines, use pr_debug
Joe Perches [Wed, 8 Feb 2012 16:14:59 +0000 (16:14 +0000)]
ixgb: Remove unnecessary defines, use pr_debug

Use the current logging styles.

Remove unnecessary _DEBUG_DRIVER_ and PFX, use pr_debug.
Coalesce format.

Signed-off-by: Joe Perches <joe@perches.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
12 years agomac80211: Don't let regulatory make us deaf
Paul Stewart [Tue, 13 Mar 2012 14:46:18 +0000 (07:46 -0700)]
mac80211: Don't let regulatory make us deaf

When regulatory information changes our HT behavior (e.g,
when we get a country code from the AP we have just associated
with), we should use this information to change the power with
which we transmit, and what channels we transmit.  Sometimes
the channel parameters we derive from regulatory information
contradicts the parameters we used in association.  For example,
we could have associated specifying HT40, but the regulatory
rules we apply may forbid HT40 operation.

In the situation above, we should reconfigure ourselves to
transmit in HT20 only, however it makes no sense for us to
disable receive in HT40, since if we associated with these
parameters, the AP has every reason to expect we can and
will receive packets this way.  The code in mac80211 does
not have the capability of sending the appropriate action
frames to signal a change in HT behaviour so the AP has
no clue we can no longer receive frames encoded this way.
In some broken AP implementations, this can leave us
effectively deaf if the AP never retries in lower HT rates.

This change breaks up the channel_type parameter in the
ieee80211_enable_ht function into a separate receive and
transmit part.  It honors the channel flags set by regulatory
in order to configure the rate control algorithm, but uses
the capability flags to configure the channel on the radio,
since these were used in association to set the AP's transmit
rate.

Signed-off-by: Paul Stewart <pstew@chromium.org>
Cc: Sam Leffler <sleffler@chromium.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Luis R Rodriguez <mcgrof@frijolero.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomac80211: rename bss_conf timestamp to last_tsf
Johannes Berg [Tue, 13 Mar 2012 13:29:30 +0000 (14:29 +0100)]
mac80211: rename bss_conf timestamp to last_tsf

This value is not really very useful by itself,
yet some drivers (including iwlwifi until I can
figure out what it should do) use it. At least
rename it to "last_tsf" to indicate the meaning
and add a note that it may be really old.

I suspect the value may become useful combined
with the rx_status->mactime, but we don't (yet)
store that value and pass it to the driver.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agocfg80211: clarify timestamp in cfg80211_inform_bss
Johannes Berg [Tue, 13 Mar 2012 12:57:04 +0000 (13:57 +0100)]
cfg80211: clarify timestamp in cfg80211_inform_bss

This is intended to be the timestamp sent by the
peer in the beacon/probe response, not any form
of host timestamp. Clarify the documentation and
variable names.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agobrmc80211: dont use jiffies for BSS TSF
Johannes Berg [Tue, 13 Mar 2012 12:57:03 +0000 (13:57 +0100)]
brmc80211: dont use jiffies for BSS TSF

The cfg80211_inform_bss() timestamp argument is
intended to be the TSF, not any form of host
timestamp.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoDocumentation: make exists consistent
Yegor Yefremov [Tue, 13 Mar 2012 09:57:51 +0000 (10:57 +0100)]
Documentation: make exists consistent

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomwifiex: rename fuctions and variables for better readability
Yogesh Ashok Powar [Tue, 13 Mar 2012 02:35:13 +0000 (19:35 -0700)]
mwifiex: rename fuctions and variables for better readability

Renaming the long fuctions and variable names from 11n_rxreoder.c
file to shorter ones for better readability.

Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomwifiex: rearrange if and else blocks to avoid extra indentation
Yogesh Ashok Powar [Tue, 13 Mar 2012 02:35:12 +0000 (19:35 -0700)]
mwifiex: rearrange if and else blocks to avoid extra indentation

This adds better readability.

Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomwifiex: use usleep_range instead of udelay
Yogesh Ashok Powar [Tue, 13 Mar 2012 02:35:11 +0000 (19:35 -0700)]
mwifiex: use usleep_range instead of udelay

For the delay of 10 uSec or more usleep_range is prefered.
Unlike udelay, sleep_range avoids large number of undesired
interrupts.

Ref Documentation/timers/timers-howto.txt

Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomwifiex: merge functions to derive cfp by chan & freq in one
Yogesh Ashok Powar [Tue, 13 Mar 2012 02:35:10 +0000 (19:35 -0700)]
mwifiex: merge functions to derive cfp by chan & freq in one

There exist different functions with very long names
to derive the channel frequency and power tripplet
based on band and channel/freq.

Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomwifiex: rearrange switch statement
Yogesh Ashok Powar [Tue, 13 Mar 2012 02:35:09 +0000 (19:35 -0700)]
mwifiex: rearrange switch statement

Fixing coding style by rearranging the switch statement

Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomwifiex: rename long function names to shorter ones
Yogesh Ashok Powar [Tue, 13 Mar 2012 02:35:08 +0000 (19:35 -0700)]
mwifiex: rename long function names to shorter ones

This saves some space and adds better readability.

Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomac80211: linearize SKBs as needed for crypto
Johannes Berg [Mon, 12 Mar 2012 12:49:14 +0000 (13:49 +0100)]
mac80211: linearize SKBs as needed for crypto

Not linearizing every SKB will help actually pass
non-linear SKBs all the way up when on an encrypted
connection. For now, linearize TKIP completely as
it is lower performance and I don't quite grok all
the details.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomac80211: move RX WEP weak IV counting
Johannes Berg [Mon, 12 Mar 2012 12:49:13 +0000 (13:49 +0100)]
mac80211: move RX WEP weak IV counting

This is better done inside the WEP decrypt
function where it doesn't have to check all
the conditions any more since they've been
tested already.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agob43: Load firmware from a work queue and not from the probe routine
Larry Finger [Fri, 9 Mar 2012 04:27:46 +0000 (22:27 -0600)]
b43: Load firmware from a work queue and not from the probe routine

Recent changes in udev are causing problems for drivers that load firmware
from the probe routine. As b43 has such a structure, it must be changed.
As this driver loads more than 1 firmware file, changing to the asynchronous routine
request_firmware_nowait() would be complicated. In this implementation, the probe
routine starts a queue that calls the firmware loading routines.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agob43legacy: Load firmware from work queue instead of from probe routine
Larry Finger [Fri, 9 Mar 2012 04:25:57 +0000 (22:25 -0600)]
b43legacy: Load firmware from work queue instead of from probe routine

Recent changes in udev are causing problems for drivers that load firmware
from the probe routine. As b43legacy has such a structure, it must be changed.
As this driver loads 3 or 4 firmware files, changing to the asynchronous routine
request_firmware_nowait() would be complicated. In this implementation, the probe
routine starts a work queue that calls the firmware loading routines.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoMerge branch 'for-linville' of git://github.com/kvalo/ath6kl
John W. Linville [Tue, 13 Mar 2012 18:45:40 +0000 (14:45 -0400)]
Merge branch 'for-linville' of git://github.com/kvalo/ath6kl

12 years agoath6kl: fix debug.c file mode
Kalle Valo [Tue, 13 Mar 2012 12:36:27 +0000 (14:36 +0200)]
ath6kl: fix debug.c file mode

Commit 7504a3e1 ("ath6kl: add padding to firmware log records") accidentally
changed debug.c mode from 100644 to 100755. Revert that back to original.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
12 years agoath6kl: use max_t() in ath6kl_cfg80211_connect()
Kalle Valo [Mon, 12 Mar 2012 11:23:23 +0000 (13:23 +0200)]
ath6kl: use max_t() in ath6kl_cfg80211_connect()

ath6kl/cfg80211.c:589: WARNING: max() should probably be
max_t(u16, vif->listen_intvl_t, ATH6KL_MAX_WOW_LISTEN_INTL)

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
12 years agoath6kl: fix open parenthesis alignment in ath6kl_sdio_suspend()
Kalle Valo [Mon, 12 Mar 2012 11:23:14 +0000 (13:23 +0200)]
ath6kl: fix open parenthesis alignment in ath6kl_sdio_suspend()

ath6kl/sdio.c:875: CHECK: Alignment should match open parenthesis

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
12 years agoath6kl: replace strict_strtoul() with kstrtoul()
Kalle Valo [Mon, 12 Mar 2012 11:23:03 +0000 (13:23 +0200)]
ath6kl: replace strict_strtoul() with kstrtoul()

Recommended by checkpatch.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
12 years agoath6kl: fix regression in ath6kl_upload_board_file()
Kalle Valo [Mon, 12 Mar 2012 11:22:54 +0000 (13:22 +0200)]
ath6kl: fix regression in ath6kl_upload_board_file()

My patch 24fc32b3 ("ath6kl: add ath6kl_bmi_write_hi32()") caused a regression
in ath6kl_upload_board_file() and the board_address variable was not
properly initialised in some cases:

ath6kl/init.c:1068:6: warning: ‘board_address’ may be used uninitialized
in this function

Most likely this broke ar6004 support but I can't test that right now.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
12 years agoixgbe: Simplify logic for ethtool loopback frame creation and testing
Alexander Duyck [Wed, 8 Feb 2012 07:50:09 +0000 (07:50 +0000)]
ixgbe: Simplify logic for ethtool loopback frame creation and testing

This change makes it a bit easier to do the loopback frame creating and
testing.  Previously we were doing an and to drop the last bit, and then
dividing the frame_size by 2 in order to get locations for frame bytes and
testing.  Instead we can simplify it by just shifting the register one bit
to the right and using that for the frame offsets.

This change also replaces all instances of rx_buffer_info with just
rx_buffer since that is closer to the name of the actual structure being
used and can save a few extra characters.

In addition I have updated the logic for cleaning up a test frame so that
we pass an rx_buffer instead of the sk_buff.  The main motivation behind
this is changes that will replace the sk_buff with just a page in the
future.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
12 years agoixgbe: Add iterator for cycling through rings on a q_vector
Alexander Duyck [Wed, 8 Feb 2012 07:50:04 +0000 (07:50 +0000)]
ixgbe: Add iterator for cycling through rings on a q_vector

Since there are multiple spots where we have to cycle through all of the
rings on a q_vector it makes sense to just add a function for iterating
through all of them.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
12 years agoixgbe: Allocate rings as part of the q_vector
Alexander Duyck [Wed, 8 Feb 2012 07:49:59 +0000 (07:49 +0000)]
ixgbe: Allocate rings as part of the q_vector

This patch makes the rings a part of the q_vector directly instead of
indirectly.  Specifically on x86 systems this helps to avoid any cache
set conflicts between the q_vector, the tx_rings, and the rx_rings as the
critical stride is 4K and in order to cross that boundary you would need to
have over 15 rings on a single q_vector.

In addition this allows for smarter allocations when Flow Director is
enabled.  Previously Flow Director would set the irq_affinity hints based
on the CPU and was still using a node interleaving approach which on some
systems would end up with the two values mismatched.  With the new approach
we can set the affinity for the irq_vector and use the CPU for that
affinity to determine the node value for the node and the rings.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
12 years agoixgbe: Drop unnecessary napi_schedule_prep and spare blank line from ixgbe_intr
Alexander Duyck [Wed, 8 Feb 2012 07:49:54 +0000 (07:49 +0000)]
ixgbe: Drop unnecessary napi_schedule_prep and spare blank line from ixgbe_intr

This patch is a minor cleanup to address the unnecessary use of
napi_schedule_prep in ixgbe_intr and to also remove a blank line that is
not needed since it is separating a comment from the line it is explaining.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
12 years agoixgbe: Default to queue pairs when number of queues is less than CPUs
Alexander Duyck [Fri, 10 Feb 2012 02:08:37 +0000 (02:08 +0000)]
ixgbe: Default to queue pairs when number of queues is less than CPUs

The old code had several errors in how it was determining the vector
budget.  In order to simplify things this patch updates the code so that it
will attempt to always allocated paired Rx/Tx vectors instead of attempting
to allocate individual vectors when the number of queues is less than the
number of CPUs.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
12 years agoixgbe: Correct Adaptive Interrupt Moderation so that it will change values
Alexander Duyck [Wed, 8 Feb 2012 07:49:43 +0000 (07:49 +0000)]
ixgbe: Correct Adaptive Interrupt Moderation so that it will change values

This change corrects an issue in which Adaptive Interrupt Moderation was
not changing values due to the fact that we were performing an and
operation on the resultant value that was causing the value to never change
from the default 20K interrupts per second.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
12 years agoixgbe: Address issues with Tx WHTRESH value not being set correctly
Alexander Duyck [Wed, 8 Feb 2012 07:49:38 +0000 (07:49 +0000)]
ixgbe: Address issues with Tx WHTRESH value not being set correctly

This change is meant to address the fact that the tx_itr_setting was
dropping to 0 when no separate Tx vectors were provided.  This had resulted
in the driver incorrectly configuring the Tx ring with a WTHRESH of 1 in
order to avoid Tx hangs even though that was not necessary. This change
makes it so that we instead take a look at the Tx ring's q_vector to
determine if the ring will have an ITR value less than 8us.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
12 years agoixgbe: Reorder adapter contents for better cache utilization
Alexander Duyck [Wed, 8 Feb 2012 07:49:28 +0000 (07:49 +0000)]
ixgbe: Reorder adapter contents for better cache utilization

This change moves several frequently accessed items together into one cache
line in order to reduce cache misses in the hot-path.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
12 years agoixgbe: Do no clear Tx status bits since eop_desc provides enough info
Alexander Duyck [Wed, 8 Feb 2012 07:49:23 +0000 (07:49 +0000)]
ixgbe: Do no clear Tx status bits since eop_desc provides enough info

There isn't any need to clear the status bits in the descriptors due to the
fact that the eop_desc provides enough information for us to know
that we have cleaned to the last packet that the software has put on the
ring.  The status bits are cleared as a part of putting the frame on the
ring so as long as we do not read the descriptor bit prior to reading the
value eop_desc we should be able to guarantee that we will not clean beyond
the end of the current data stream.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
12 years agonet: Add memory barriers to prevent possible race in byte queue limits
Alexander Duyck [Tue, 7 Feb 2012 02:29:06 +0000 (02:29 +0000)]
net: Add memory barriers to prevent possible race in byte queue limits

This change adds a memory barrier to the byte queue limit code to address a
possible race as has been seen in the past with the
netif_stop_queue/netif_wake_queue logic.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
12 years agonet: Fix issue with netdev_tx_reset_queue not resetting queue from XOFF state
Alexander Duyck [Tue, 7 Feb 2012 02:29:01 +0000 (02:29 +0000)]
net: Fix issue with netdev_tx_reset_queue not resetting queue from XOFF state

We are seeing dev_watchdog hangs on several drivers.  I suspect this is due
to the __QUEUE_STATE_STACK_XOFF bit being set prior to a reset for link
change, and then not being cleared by netdev_tx_reset_queue.  This change
corrects that.

In addition we were seeing dev_watchdog hangs on igb after running the
ethtool tests.  We found this to be due to the fact that the ethtool test
runs the same logic as ndo_start_xmit, but we were never clearing the XOFF
flag since the loopback test in ethtool does not do byte queue accounting.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
12 years agoixgbe: add support for byte queue limits
Alexander Duyck [Tue, 7 Feb 2012 08:14:33 +0000 (08:14 +0000)]
ixgbe: add support for byte queue limits

This adds support for byte queue limits (BQL).

Based on patch from Eric Dumazet for igb.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>