GitHub/LineageOS/G12/android_kernel_amlogic_linux-4.9.git
10 years agodrm/radeon/dpm: add late_enable for rs780/rs880/rv6xx
Alex Deucher [Thu, 19 Dec 2013 17:18:13 +0000 (12:18 -0500)]
drm/radeon/dpm: add late_enable for rs780/rs880/rv6xx

Make sure interrupts are enabled before we enable
thermal interrupts.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 years agodrm/radeon/dpm: add a late enable callback
Alex Deucher [Thu, 19 Dec 2013 16:37:22 +0000 (11:37 -0500)]
drm/radeon/dpm: add a late enable callback

Certain features need to be enabled after ring tests
(e.g., powergating, etc.).  Add a function pointer
to split out late enable features.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 years agodrm/radeon: re-order firmware loading in preparation for dpm rework
Alex Deucher [Thu, 19 Dec 2013 00:11:27 +0000 (19:11 -0500)]
drm/radeon: re-order firmware loading in preparation for dpm rework

We need to reorder the driver init sequence to better accomodate
dpm which needs to be loaded earlier in the init sequence.  Move
fw init up so that it's available for dpm init.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 years agodrm/radeon/cik: drop cg_update from dpm code
Alex Deucher [Wed, 18 Dec 2013 19:16:50 +0000 (14:16 -0500)]
drm/radeon/cik: drop cg_update from dpm code

I'm not entirely sure this is required and it won't work
with the dpm restructing anyway.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 years agodrm/radeon/si: drop cg_update from dpm code
Alex Deucher [Wed, 18 Dec 2013 19:11:40 +0000 (14:11 -0500)]
drm/radeon/si: drop cg_update from dpm code

I'm not entirely sure this is required and it won't work
with the dpm restructing anyway.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 years agodrm/radeon/dpm: remove unnecessary checks in dpm_init
Alex Deucher [Wed, 18 Dec 2013 18:39:58 +0000 (13:39 -0500)]
drm/radeon/dpm: remove unnecessary checks in dpm_init

No need to check rdev->pm.num_power_states; this is a vestige
of the old pm code.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 years agodrm/radeon: add GART debugfs access v3
Christian König [Wed, 18 Dec 2013 20:07:40 +0000 (21:07 +0100)]
drm/radeon: add GART debugfs access v3

v2: add default_llseek
v3: set inode size in the open callback

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 years agodrm/radeon: add VRAM debugfs access v3
Christian König [Wed, 18 Dec 2013 20:07:39 +0000 (21:07 +0100)]
drm/radeon: add VRAM debugfs access v3

Not very fast, but makes it possible to access even the
normally inaccessible parts of VRAM from userspace.

v2: use MM_INDEX_HI for >2GB mem access, add default_llseek
v3: set inode size in the open callback

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 years agodrm/radeon: cleanup radeon_ttm debugfs handling
Christian König [Thu, 12 Dec 2013 08:42:40 +0000 (09:42 +0100)]
drm/radeon: cleanup radeon_ttm debugfs handling

Otherwise we not necessary export the right information.

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 years agodrm/radeon: update fence values in before reporting them
Christian König [Thu, 12 Dec 2013 08:42:39 +0000 (09:42 +0100)]
drm/radeon: update fence values in before reporting them

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 years agodrm/radeon: report the real offset in radeon_sa_bo_dump_debug_info
Christian König [Thu, 12 Dec 2013 08:42:38 +0000 (09:42 +0100)]
drm/radeon: report the real offset in radeon_sa_bo_dump_debug_info

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 years agodrm/radeon: improve ring debugfs a bit
Christian König [Thu, 12 Dec 2013 08:42:37 +0000 (09:42 +0100)]
drm/radeon: improve ring debugfs a bit

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 years agodrm/dp: Clarify automated test constant and add constant for FAUX test pattern
Todd Previte [Fri, 4 Oct 2013 19:59:03 +0000 (12:59 -0700)]
drm/dp: Clarify automated test constant and add constant for FAUX test pattern

  - DP_TEST_LINK_PATTERN is ambiguous, rename to DP_TEST_LINK_VIDEO_PATTERN to clarify
  - Added DP_TEST_LINK_FAUX_PATTERN to support automated testing of Fast AUX

Signed-off-by: Todd Previte <tprevite@gmail.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
10 years agodrm: use memdup_user() as a cleanup
Dan Carpenter [Wed, 11 Dec 2013 10:35:11 +0000 (11:35 +0100)]
drm: use memdup_user() as a cleanup

drivers/gpu/drm/r128/r128_state.c:1014:10-17: WARNING opportunity for memdup_user
/c/kernel-tests/src/cocci/drivers/gpu/drm/r128/r128_state.c:1029:9-16: WARNING opportunity for memdup_user
/c/kernel-tests/src/cocci/drivers/gpu/drm/r128/r128_state.c:904:10-17: WARNING opportunity for memdup_user
/c/kernel-tests/src/cocci/drivers/gpu/drm/r128/r128_state.c:914:9-16: WARNING opportunity for memdup_user

 Use memdup_user rather than duplicating its implementation
 This is a little bit restricted to reduce false positives

Generated by: coccinelle/api/memdup_user.cocci

CC: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
10 years agodrm: remove dev->vma_count
Daniel Vetter [Wed, 11 Dec 2013 10:35:10 +0000 (11:35 +0100)]
drm: remove dev->vma_count

This is just used for a debugfs file, and we can easily reconstruct
this number by just walking the list twice. Which isn't really bad for
a debugfs file anyway.

So let's rip this out.

There's the other issue that the dev->vmalist itself is a bit useless,
since that can be reconstructed with all the memory mapping
information from proc. But remove that is a different topic entirely.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
10 years agodrm: Kill file_priv->ioctl_count tracking
Daniel Vetter [Wed, 11 Dec 2013 10:35:09 +0000 (11:35 +0100)]
drm: Kill file_priv->ioctl_count tracking

It's racy, and it's only used in debugfs. There are simpler ways to
know whether something is going on (like looking at dmesg with full
debugging enabled). And they're all much more useful.

So let's just rip this out.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
10 years agodrm: rip out dev->ioctl_count tracking
Daniel Vetter [Wed, 11 Dec 2013 10:35:08 +0000 (11:35 +0100)]
drm: rip out dev->ioctl_count tracking

Now dev->ioctl_count tries to prevent the device from disappearing if
it's still in use. And if we'd actually need this code it would be
hopelessly racy and broken.

But luckily the vfs already takes care of this. So we can just rip it
out.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
10 years agodrm/gma500: Remove dead code
Daniel Vetter [Wed, 11 Dec 2013 10:34:47 +0000 (11:34 +0100)]
drm/gma500: Remove dead code

This has the nice advantage that we'll get rid of a DRM_WAIT_ON user
for free.

Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
10 years agodrm: Kill DRM_SUSER
Daniel Vetter [Wed, 11 Dec 2013 10:34:46 +0000 (11:34 +0100)]
drm: Kill DRM_SUSER

Checking directly for the right capability is simpler. Also this rids
us of a few places that use DRM_CURRENTPID.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
10 years agodrm: Kill DRM_*MEMORYBARRIER
Daniel Vetter [Wed, 11 Dec 2013 10:34:45 +0000 (11:34 +0100)]
drm: Kill DRM_*MEMORYBARRIER

The real linux interfaces are soooo much easier on the eyes ...

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
10 years agodrm: Kill DRM_COPY_(TO|FROM)_USER
Daniel Vetter [Wed, 11 Dec 2013 10:34:44 +0000 (11:34 +0100)]
drm: Kill DRM_COPY_(TO|FROM)_USER

Less yelling ftw!

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
10 years agodrm: Kill DRM_WAKUP and DRM_INIT_WAITQUEUE
Daniel Vetter [Wed, 11 Dec 2013 10:34:43 +0000 (11:34 +0100)]
drm: Kill DRM_WAKUP and DRM_INIT_WAITQUEUE

Less yelling ftw!

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
10 years agodrm: Kill DRM_IRQ_ARGS
Daniel Vetter [Wed, 11 Dec 2013 10:34:42 +0000 (11:34 +0100)]
drm: Kill DRM_IRQ_ARGS

I've killed them a long time ago in drm/i915, let's get rid of this
remnant of shared drm core days for good.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
10 years agodrm: Kill DRM_HZ
Daniel Vetter [Wed, 11 Dec 2013 10:34:41 +0000 (11:34 +0100)]
drm: Kill DRM_HZ

We don't have any userspace interfaces that use HZ as a time unit, so
having our own DRM define is useless.

Remove this remnant from the shared drm core days.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
10 years agodrm: rip out DRM_AGP_MEM and DRM_AGP_KERN
Daniel Vetter [Wed, 11 Dec 2013 10:34:40 +0000 (11:34 +0100)]
drm: rip out DRM_AGP_MEM and DRM_AGP_KERN

The <linux/agp_backend.h> header provides dummy functions and
fallbacks, so no need for screaming macros.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
10 years agodrm: remove global_mutex locking around agp_init
Daniel Vetter [Wed, 11 Dec 2013 10:34:39 +0000 (11:34 +0100)]
drm: remove global_mutex locking around agp_init

David Herrmann dutifully moved this locking along when moving the
agp_init call out of the generic drm_dev_register into the pci
specific load helpers.

But afaict there's no need and the reason for that locking has been
purely a historical accident - we need the lock around the driver dev
node registration to paper over the midlayer init races, and the agp
init simply ended up in there. The real fix for all this is of course
to delay the dev (and sysfs/debugfs) interface registration until
everything is fully set up.

Until then stop the cargo-cult locking from spreading and remove the
locking.

Cc: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
10 years agodrm/agpsupport: use kzalloc instead of kmalloc/memset
Dave Airlie [Wed, 18 Dec 2013 01:27:06 +0000 (11:27 +1000)]
drm/agpsupport: use kzalloc instead of kmalloc/memset

Signed-off-by: Dave Airlie <airlied@redhat.com>
10 years agodrm: kill the ->agp_destroy callback
Daniel Vetter [Wed, 11 Dec 2013 10:34:38 +0000 (11:34 +0100)]
drm: kill the ->agp_destroy callback

Call drm_pci_agp_destroy directly, there's no point in the
indirection. Long term we want to shuffle this into each driver's
unload logic, but that needs cleared-up drm lifetime rules first.

v2: Add a dummy function for !CONFIG_PCI, spotted my David Herrmann.

v3: Fixup for the coding style police.

Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Cc: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
10 years agodrm: inline drm_agp_destroy
Daniel Vetter [Wed, 11 Dec 2013 10:34:37 +0000 (11:34 +0100)]
drm: inline drm_agp_destroy

Wrapping a kfree is pointless.

v2: Add a comment to the kerneldoc for drm_agp_init to explain where
the kfree happens as requested by David. Note that for modeset drivers
agp cleanup is fairly complicated anyway: The drm_agp_clear is a noop
and drivers must call drm_agp_release on their own. Which they all
seem to do properly.

Cc: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
10 years agodrm: remove agp_init() bus callback
Daniel Vetter [Wed, 11 Dec 2013 10:34:36 +0000 (11:34 +0100)]
drm: remove agp_init() bus callback

The PCI bus helper is the only user of it. Call it directly before
device-registration to get rid of the callback.

Note that all drm_agp_*() calls are locked with the drm-global-mutex so we
need to explicitly lock it during initialization. It's not really clear
why it's needed, but lets be safe.

v2: Rebase on top of the agp_init interface change.

v3: Remove the rebase-fail where I've accidentally killed the ->irq_by_busid
callback a bit too early.

Cc: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com> (v1)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
10 years agodrm: rip out drm_core_has_AGP
Daniel Vetter [Wed, 11 Dec 2013 10:34:35 +0000 (11:34 +0100)]
drm: rip out drm_core_has_AGP

Most place actually want to just check for dev->agp (most do, but a
few don't so this fixes a few potential NULL derefs). The only
exception is the agp init code which should check for the AGP driver
feature flag.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
10 years agodrm: ->agp_init can't fail
Daniel Vetter [Wed, 11 Dec 2013 10:34:34 +0000 (11:34 +0100)]
drm: ->agp_init can't fail

Thanks to the removal of REQUIRE_AGP we can use a void return value
and shed a bit of complexity.

Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
10 years agodrm: kill DRIVER_REQUIRE_AGP
Daniel Vetter [Wed, 11 Dec 2013 10:34:33 +0000 (11:34 +0100)]
drm: kill DRIVER_REQUIRE_AGP

Only the two intel drivers need this and they can easily check for
working agp support in their driver ->load callbacks.

This is the only reason why agp initialization could fail, so allows
us to rip out a bit of error handling code in the next patch.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
10 years agodrm/rcar-du: Fix return value check in rcar_du_lvdsenc_get_resources()
Wei Yongjun [Tue, 10 Dec 2013 02:27:19 +0000 (03:27 +0100)]
drm/rcar-du: Fix return value check in rcar_du_lvdsenc_get_resources()

In case of error, the function devm_ioremap_resource() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check should be
replaced with IS_ERR(). Also remove the dev_err call to avoid redundant
error message.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
[Remove the unneeded mem == NULL check]
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
10 years agodrm/dp: Use AUX constants from specification
Thierry Reding [Mon, 16 Dec 2013 16:01:29 +0000 (17:01 +0100)]
drm/dp: Use AUX constants from specification

The current values seem to be defined in a format that's specific to the
i915, gma500 and radeon drivers. To make this more generally useful, use
the values as defined in the specification.

While at it, prefix the constants with DP_ for improved namespacing.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
10 years agodrm/bufs: remove handling of _DRM_GEM mappings
Daniel Vetter [Wed, 11 Dec 2013 10:34:32 +0000 (11:34 +0100)]
drm/bufs: remove handling of _DRM_GEM mappings

Gone with the new gem vma offset manager from David.

We can also ditch the uapi header definition from the enum since
userspace never used this. It ended up in there purely for historical
reasons (for reusing the old drm mmap code essentially), not because
userspace ever needed it.

Cc: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
10 years agodrm: restrict the device list for shadow attached drivers
Daniel Vetter [Wed, 11 Dec 2013 10:34:31 +0000 (11:34 +0100)]
drm: restrict the device list for shadow attached drivers

There's really no need for the drm core to keep a list of all
devices of a given driver - the linux device model keeps perfect
track of this already for us.

The exception is old legacy ums drivers using pci shadow attaching.
So rename the lists to make the use case clearer and rip out everything
else.

v2: Rebase on top of David Herrmann's drm device register changes.
Also drop the bogus dev_set_drvdata for platform drivers that somehow
crept into the original version - drivers really should be in full
control of that field.

v3: Initialize driver->legacy_dev_list outside of the loop, spotted by
David Herrmann.

v4: Rebase on top of the newly created host1x drm_bus for tegra.

Cc: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
10 years agodrm: rip out drm_platform_exit
Daniel Vetter [Wed, 11 Dec 2013 10:34:30 +0000 (11:34 +0100)]
drm: rip out drm_platform_exit

This very much looks like a remnant of the old legady ums shadow
attach days. Now with the last users gone we can rip it out since
we won't ever support an ums drm driver again.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
10 years agodrm/msm: call drm_put_dev directly in ->remove
Daniel Vetter [Wed, 11 Dec 2013 10:34:29 +0000 (11:34 +0100)]
drm/msm: call drm_put_dev directly in ->remove

The drvdata pointer is already assigned to something useful.

Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
10 years agodrm/armada: directly call drm_put_dev in ->remove
Daniel Vetter [Wed, 11 Dec 2013 10:34:28 +0000 (11:34 +0100)]
drm/armada: directly call drm_put_dev in ->remove

Again no apparent user of the driver data field.

Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
10 years agodrm/shmob: call drm_put_dev directly from ->remove hook
Daniel Vetter [Wed, 11 Dec 2013 10:34:27 +0000 (11:34 +0100)]
drm/shmob: call drm_put_dev directly from ->remove hook

We need to chase one pointer here.

Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
10 years agodrm/omap: call drm_put_dev directly in ->remove
Daniel Vetter [Wed, 11 Dec 2013 10:34:26 +0000 (11:34 +0100)]
drm/omap: call drm_put_dev directly in ->remove

Again omap already sets the driver data pointer to the drm_device.

Also drop the driver unregister call, that should be (and already is)
done in the module unload hook.

Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
10 years agodrm/tilcdc: call drm_put_dev directly from ->remove
Daniel Vetter [Wed, 11 Dec 2013 10:34:25 +0000 (11:34 +0100)]
drm/tilcdc: call drm_put_dev directly from ->remove

tilcdc already stores the drm_device in the driver data pointer. So
use that.

Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
10 years agodrm/imx: directly call drm_put_dev in ->remove
Daniel Vetter [Wed, 11 Dec 2013 10:34:24 +0000 (11:34 +0100)]
drm/imx: directly call drm_put_dev in ->remove

Again no apparent user of the driver data field.

Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
10 years agodrm/exynos: call drm_put_dev directly from ->remove
Daniel Vetter [Wed, 11 Dec 2013 10:34:23 +0000 (11:34 +0100)]
drm/exynos: call drm_put_dev directly from ->remove

I didn't find any user of the driver data yet, so store the
drm_device pointer in there.

Cc: Inki Dae <inki.dae@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
10 years agodrm/rcar: call drm_put_dev directly in the ->remove hook
Daniel Vetter [Wed, 11 Dec 2013 10:34:22 +0000 (11:34 +0100)]
drm/rcar: call drm_put_dev directly in the ->remove hook

The magic dance drm_platform_exit does is actually a remnant of the
old legacy shadow attach support for platform devices. Modern modesetting
drm drivers shouldn't do this any more (and usb/pci devices actually don't
do this).

Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
10 years agodrm: shmob_drm: Check clk_prepare_enable() return value
Laurent Pinchart [Mon, 2 Dec 2013 00:52:20 +0000 (01:52 +0100)]
drm: shmob_drm: Check clk_prepare_enable() return value

The clk_prepare_enable() call can fail. Check it's return value. We
can't propagate it all the way to the user as the KMS operations in
which the clock is enabled return a void.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
10 years agodrm: Implement dummies for debugfs helpers
Thierry Reding [Thu, 12 Dec 2013 14:44:04 +0000 (15:44 +0100)]
drm: Implement dummies for debugfs helpers

In case where debugfs support is disabled, define dummy functions to
avoid the need for #ifdefery in drivers.

Based on an earlier patch by Arnd Bergmann.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
10 years agovideo/fb: Propagate error code from failing to unregister conflicting fb
Chris Wilson [Mon, 16 Dec 2013 15:57:39 +0000 (15:57 +0000)]
video/fb: Propagate error code from failing to unregister conflicting fb

If we fail to remove a conflicting fb driver, we need to abort the
loading of the second driver to avoid likely kernel panics.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
10 years agodrm: Push dirtyfb ioctl kms locking down to drivers
Ville Syrjälä [Wed, 4 Dec 2013 12:13:58 +0000 (14:13 +0200)]
drm: Push dirtyfb ioctl kms locking down to drivers

Not all drivers will need take all the modeset locks for dirtyfb, so
push the locking down to the drivers.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
10 years agodrm: Don't reference objects in the flink name idr
Kristian Hogsberg [Tue, 3 Dec 2013 01:36:17 +0000 (17:36 -0800)]
drm: Don't reference objects in the flink name idr

There's no reason to keep a reference to objects in the name idr.  Each
handle to an object has a reference to the object and just before we
destroy the last handle we take the object out of the name idr.  Thus,
if an object is in the name idr, there's at least one reference to the
object.

Or to put it another way, the name idr reference will never keep the
object alive.  It just looks like it, which is confusing.

Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
10 years agodrm: do not steal the display if we have a master
Paulo Zanoni [Wed, 27 Nov 2013 20:24:08 +0000 (18:24 -0200)]
drm: do not steal the display if we have a master

Sometimes we want to disable all the screens on a system, because that
will allow the graphics card to be put into low-power states. The
problem is that, for example, while all screens are disabled, if we
get a hotplug interrupt, fbcon will decide to set a mode instead of
keeping everything disabled, which will remove us from our low power
states.

Let's assume that if there's a DRM master, it will be able to do
whatever is appropriate when we get the hotplug.

This problem can be reproduced by the runtime PM test program from
intel-gpu-tools: we disable all the screens so the graphics device can
be put into D3, then something triggers a hotplug interrupt, fbcon
sets a mode and breaks our test suite. The problem can be reproduced
more easily by the "i2c" subtest.

Other approaches considered for the problem:
    - Return "false" if "bound == 0" and the caller of
      drm_fb_helper_is_bound is a hotplug handler. This would break
      the case where the machine boots with no outputs connected, then
      the user plugs a monitor.
    - Add a new IOCTL to force fbcon to not set modes. This would keep
      all the current applications behaving the same, but adding a new
      IOCTL is not always the greatest idea.
    - Return false only if "dev->primary->master && bound == 0". This
      was my first implementation, but Chris suggested we should do
      the check irrespective of the "bound" variable.

Thanks to Daniel Vetter for the investigation, ideas and the
implementation of the hotplug alternative.

v2: - Do the check first, irrespective of "bound".
    - Cc dri-devel

Cc: dri-devel@lists.freedesktop.org
Credits-to: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
10 years agodrm: Don't split up debug output
Daniel Vetter [Sun, 17 Nov 2013 21:25:02 +0000 (22:25 +0100)]
drm: Don't split up debug output

Otherwise we risk that the 2nd part of the line ends up on a line of
it's own, which means a kernel dmesg line without a log level. This
then upsets the dmesg checker in piglit.

Only really happens in some of the truly nasty igt testcases which
race cache dropping (through debugfs) with other gem operations.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
10 years agodrm: add DRM_ERROR_RATELIMITED
Rob Clark [Thu, 21 Nov 2013 19:29:51 +0000 (14:29 -0500)]
drm: add DRM_ERROR_RATELIMITED

For error traces in situations that can run away, it is nice to have a
rate-limited version of DRM_ERROR() to avoid massive log flooding.

Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
10 years agodrm/edid: Make edid_load() return a void *
Geert Uytterhoeven [Tue, 19 Nov 2013 11:15:05 +0000 (12:15 +0100)]
drm/edid: Make edid_load() return a void *

Always use "void *" for arbitrary memory buffers, as this allows to drop
casts in assignments.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
10 years agoMerge tag 'drm-intel-next-2013-11-29' of git://people.freedesktop.org/~danvet/drm...
Dave Airlie [Wed, 18 Dec 2013 00:39:56 +0000 (10:39 +1000)]
Merge tag 'drm-intel-next-2013-11-29' of git://people.freedesktop.org/~danvet/drm-intel into drm-next

- some more ppgtt prep patches from Ben
- a few fbc fixes from Ville
- power well rework from Imre
- vlv forcewake improvements from Deepak S, Ville and Jesse
- a few smaller things all over

[airlied: fixup forwcewake conflict]
* tag 'drm-intel-next-2013-11-29' of git://people.freedesktop.org/~danvet/drm-intel: (97 commits)
  drm/i915: Fix port name in vlv_wait_port_ready() timeout warning
  drm/i915: Return a drm_mode_status enum in the mode_valid vfuncs
  drm/i915: add intel_display_power_enabled_sw() for use in atomic ctx
  drm/i915: drop DRM_ERROR in intel_fbdev init
  drm/i915/vlv: use parallel context restore when coming out of RC6
  drm/i915/vlv: use a lower RC6 timeout on VLV
  drm/i915/sdvo: Fix up debug output to not split lines
  drm/i915: make sparse happy for the new vlv mmio read function
  drm/i915: drop the right force-wake engine in the vlv mmio funcs
  drm/i915: Fix GT wake FIFO free entries for VLV
  drm/i915: Report all GTFIFODBG errors
  drm/i915: Enabling DebugFS for valleyview forcewake counts
  drm/i915/vlv: Valleyview support for forcewake Individual power wells.
  drm/i915: Add power well arguments to force wake routines.
  drm/i915: Do not attempt to re-enable an unconnected primary plane
  drm/i915: add a debugfs entry for power domain info
  drm/i915: add a default always-on power well
  drm/i915: don't do BDW/HSW specific powerdomains init on other platforms
  drm/i915: protect HSW power well check with IS_HASWELL in redisable_vga
  drm/i915: use IS_HASWELL/BROADWELL instead of HAS_POWER_WELL
  ...

Conflicts:
drivers/gpu/drm/i915/intel_display.c

10 years agoLinux 3.13-rc4
Linus Torvalds [Sun, 15 Dec 2013 20:31:33 +0000 (12:31 -0800)]
Linux 3.13-rc4

10 years agonull_blk: mem garbage on NUMA systems during init
Matias Bjorling [Tue, 10 Dec 2013 15:50:38 +0000 (16:50 +0100)]
null_blk: mem garbage on NUMA systems during init

For NUMA systems, initializing the blk-mq layer and using per node hctx.
We initialize submit queues to 1, while blk-mq nr_hw_queues is
initialized to the number of NUMA nodes.

This makes the null_init_hctx function overwrite memory outside of what
it allocated.  In my case it lead to writing garbage into struct
request_queue's mq_map.

Signed-off-by: Matias Bjorling <m@bjorling.me>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agoradeon_pm: fix oops in hwmon_attributes_visible() and radeon_hwmon_show_temp_thresh()
Sergey Senozhatsky [Thu, 12 Dec 2013 23:25:57 +0000 (02:25 +0300)]
radeon_pm: fix oops in hwmon_attributes_visible() and radeon_hwmon_show_temp_thresh()

Since commit ec39f64bba34 ("drm/radeon/dpm: Convert to use
devm_hwmon_register_with_groups") radeon_hwmon_init() is using
hwmon_device_register_with_groups(), which sets `rdev' as a device
private driver_data, while hwmon_attributes_visible() and
radeon_hwmon_show_temp_thresh() are still waiting for `drm_device'.

Fix them by using dev_get_drvdata(), in order to avoid this oops:

  BUG: unable to handle kernel paging request at 0000000000001e28
  IP: [<ffffffffa02ae8b4>] hwmon_attributes_visible+0x18/0x3d [radeon]
  PGD 15057e067 PUD 151a8e067 PMD 0
  Oops: 0000 [#1] PREEMPT SMP
  Call Trace:
    internal_create_group+0x114/0x1d9
    sysfs_create_group+0xe/0x10
    sysfs_create_groups+0x22/0x5f
    device_add+0x34f/0x501
    device_register+0x15/0x18
    hwmon_device_register_with_groups+0xb5/0xed
    radeon_hwmon_init+0x56/0x7c [radeon]
    radeon_pm_init+0x134/0x7e5 [radeon]
    radeon_modeset_init+0x75f/0x8ed [radeon]
    radeon_driver_load_kms+0xc6/0x187 [radeon]
    drm_dev_register+0xf9/0x1b4 [drm]
    drm_get_pci_dev+0x98/0x129 [drm]
    radeon_pci_probe+0xa3/0xac [radeon]
    pci_device_probe+0x6e/0xcf
    driver_probe_device+0x98/0x1c4
    __driver_attach+0x5c/0x7e
    bus_for_each_dev+0x7b/0x85
    driver_attach+0x19/0x1b
    bus_add_driver+0x104/0x1ce
    driver_register+0x89/0xc5
    __pci_register_driver+0x58/0x5b
    drm_pci_init+0x86/0xea [drm]
    radeon_init+0x97/0x1000 [radeon]
    do_one_initcall+0x7f/0x117
    load_module+0x1583/0x1bb4
    SyS_init_module+0xa0/0xaf

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Sun, 15 Dec 2013 19:56:47 +0000 (11:56 -0800)]
Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

 1) Revert CHECKSUM_COMPLETE optimization in pskb_trim_rcsum(), I can't
    figure out why it breaks things.

 2) Fix comparison in netfilter ipset's hash_netnet4_data_equal(), it
    was basically doing "x == x", from Dave Jones.

 3) Freescale FEC driver was DMA mapping the wrong number of bytes, from
    Sebastian Siewior.

 4) Blackhole and prohibit routes in ipv6 were not doing the right thing
    because their ->input and ->output methods were not being assigned
    correctly.  Now they behave properly like their ipv4 counterparts.
    From Kamala R.

 5) Several drivers advertise the NETIF_F_FRAGLIST capability, but
    really do not support this feature and will send garbage packets if
    fed fraglist SKBs.  From Eric Dumazet.

 6) Fix long standing user triggerable BUG_ON over loopback in RDS
    protocol stack, from Venkat Venkatsubra.

 7) Several not so common code paths can potentially try to invoke
    packet scheduler actions that might be NULL without checking.  Shore
    things up by either 1) defining a method as mandatory and erroring
    on registration if that method is NULL 2) defininig a method as
    optional and the registration function hooks up a default
    implementation when NULL is seen.  From Jamal Hadi Salim.

 8) Fix fragment detection in xen-natback driver, from Paul Durrant.

 9) Kill dangling enter_memory_pressure method in cg_proto ops, from
    Eric W Biederman.

10) SKBs that traverse namespaces should have their local_df cleared,
    from Hannes Frederic Sowa.

11) IOCB file position is not being updated by macvtap_aio_read() and
    tun_chr_aio_read().  From Zhi Yong Wu.

12) Don't free virtio_net netdev before releasing all of the NAPI
    instances.  From Andrey Vagin.

13) Procfs entry leak in xt_hashlimit, from Sergey Popovich.

14) IPv6 routes that are no cached routes should not count against the
    garbage collection limits.  We had this almost right, but were
    missing handling addrconf generated routes properly.  From Hannes
    Frederic Sowa.

15) fib{4,6}_rule_suppress() have to consider potentially seeing NULL
    route info when they are called, from Stefan Tomanek.

16) TUN and MACVTAP have had truncated packet signalling for some time,
    fix from Jason Wang.

17) Fix use after frrr in __udp4_lib_rcv(), from Eric Dumazet.

18) xen-netback does not interpret the NAPI budget properly for TX work,
    fix from Paul Durrant.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (132 commits)
  igb: Fix for issue where values could be too high for udelay function.
  i40e: fix null dereference
  xen-netback: fix gso_prefix check
  net: make neigh_priv_len in struct net_device 16bit instead of 8bit
  drivers: net: cpsw: fix for cpsw crash when build as modules
  xen-netback: napi: don't prematurely request a tx event
  xen-netback: napi: fix abuse of budget
  sch_tbf: use do_div() for 64-bit divide
  udp: ipv4: must add synchronization in udp_sk_rx_dst_set()
  net:fec: remove duplicate lines in comment about errata ERR006358
  Revert "8390 : Replace ei_debug with msg_enable/NETIF_MSG_* feature"
  8390 : Replace ei_debug with msg_enable/NETIF_MSG_* feature
  xen-netback: make sure skb linear area covers checksum field
  net: smc91x: Fix device tree based configuration so it's usable
  udp: ipv4: fix potential use after free in udp_v4_early_demux()
  macvtap: signal truncated packets
  tun: unbreak truncated packet signalling
  net: sched: htb: fix the calculation of quantum
  net: sched: tbf: fix the calculation of max_size
  micrel: add support for KSZ8041RNLI
  ...

10 years agoMerge branch 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Linus Torvalds [Sun, 15 Dec 2013 19:52:47 +0000 (11:52 -0800)]
Merge branch 'x86/urgent' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Peter Anvin:
 "This is a pretty small batch:

  The biggest single change is to stop using EFI time services on 32-bit
  platforms.  This matches our current behavior on 64-bit platforms as
  we already had ruled them out there as being too unreliable.  Turns
  out that affects 32-bit platforms, too.

  One NULL pointer fix for SGI UV.

  Two minor build fixes, one of which only affects icc and the other
  which affects icc and future versions or nonstandard default settings
  of gcc"

* 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, efi: Don't use (U)EFI time services on 32 bit
  x86, build, icc: Remove uninitialized_var() from compiler-intel.h
  x86/UV: Fix NULL pointer dereference in uv_flush_tlb_others() if the 'nobau' boot option is used
  x86, build: Pass in additional -mno-mmx, -mno-sse options

10 years agoMerge tag 'pci-v3.13-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaa...
Linus Torvalds [Sun, 15 Dec 2013 19:45:27 +0000 (11:45 -0800)]
Merge tag 'pci-v3.13-fixes-2' of git://git./linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "PCI device hotplug
    - Move device_del() from pci_stop_dev() to pci_destroy_dev() (Rafael
      Wysocki)

  Host bridge drivers
    - Update maintainers for DesignWare, i.MX6, Armada, R-Car (Bjorn
      Helgaas)
    - mvebu: Return 'unsupported' for Interrupt Line and Interrupt Pin
      (Jason Gunthorpe)

  Miscellaneous
    - Avoid unnecessary CPU switch when calling .probe() (Alexander
      Duyck)
    - Revert "workqueue: allow work_on_cpu() to be called recursively"
      (Bjorn Helgaas)
    - Disable Bus Master only on kexec reboot (Khalid Aziz)
    - Omit PCI ID macro strings to shorten quirk names for LTO (Michal
      Marek)"

* tag 'pci-v3.13-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  MAINTAINERS: Add DesignWare, i.MX6, Armada, R-Car PCI host maintainers
  PCI: Disable Bus Master only on kexec reboot
  PCI: mvebu: Return 'unsupported' for Interrupt Line and Interrupt Pin
  PCI: Omit PCI ID macro strings to shorten quirk names
  PCI: Move device_del() from pci_stop_dev() to pci_destroy_dev()
  Revert "workqueue: allow work_on_cpu() to be called recursively"
  PCI: Avoid unnecessary CPU switch when calling driver .probe() method

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris...
Linus Torvalds [Sun, 15 Dec 2013 19:28:02 +0000 (11:28 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/linux-security

Pull SELinux fixes from James Morris.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  selinux: process labeled IPsec TCP SYN-ACK packets properly in selinux_ip_postroute()
  selinux: look for IPsec labels on both inbound and outbound packets
  selinux: handle TCP SYN-ACK packets correctly in selinux_ip_postroute()
  selinux: handle TCP SYN-ACK packets correctly in selinux_ip_output()
  selinux: fix possible memory leak

10 years agoRevert "selinux: consider filesystem subtype in policies"
Linus Torvalds [Sun, 15 Dec 2013 19:17:45 +0000 (11:17 -0800)]
Revert "selinux: consider filesystem subtype in policies"

This reverts commit 102aefdda4d8275ce7d7100bc16c88c74272b260.

Tom London reports that it causes sync() to hang on Fedora rawhide:

  https://bugzilla.redhat.com/show_bug.cgi?id=1033965

and Josh Boyer bisected it down to this commit.  Reverting the commit in
the rawhide kernel fixes the problem.

Eric Paris root-caused it to incorrect subtype matching in that commit
breaking fuse, and has a tentative patch, but by now we're better off
retrying this in 3.14 rather than playing with it any more.

Reported-by: Tom London <selinux@gmail.com>
Bisected-by: Josh Boyer <jwboyer@fedoraproject.org>
Acked-by: Eric Paris <eparis@redhat.com>
Cc: James Morris <jmorris@namei.org>
Cc: Anand Avati <avati@redhat.com>
Cc: Paul Moore <paul@paul-moore.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agoigb: Fix for issue where values could be too high for udelay function.
Carolyn Wyborny [Sat, 14 Dec 2013 11:26:46 +0000 (03:26 -0800)]
igb: Fix for issue where values could be too high for udelay function.

This patch changes the igb_phy_has_link function to check the value of the
parameter before deciding to use udelay or mdelay in order to be sure that
the value is not too high for udelay function.

CC: stable kernel <stable@vger.kernel.org> # 3.9+
Signed-off-by: Sunil K Pandey <sunil.k.pandey@intel.com>
Signed-off-by: Kevin B Smith <kevin.b.smith@intel.com>
Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoi40e: fix null dereference
Jesse Brandeburg [Sat, 14 Dec 2013 11:26:45 +0000 (03:26 -0800)]
i40e: fix null dereference

If the vsi->tx_rings structure is NULL we don't want to panic.

Change-Id: Ic694f043701738c434e8ebe0caf0673f4410dc10
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoMerge tag 'edac_fixes_for_3.13' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sat, 14 Dec 2013 17:37:17 +0000 (09:37 -0800)]
Merge tag 'edac_fixes_for_3.13' of git://git./linux/kernel/git/bp/bp

Pull EDAC fix from Borislav Petkov:
 "Silence a compiler warning in sb_edac"

* tag 'edac_fixes_for_3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  sb_edac: Shut up compiler warning when EDAC_DEBUG is enabled

11 years agoMerge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm
Linus Torvalds [Sat, 14 Dec 2013 00:16:03 +0000 (16:16 -0800)]
Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm

Pull ARM fixes from Russell King:
 "This resolves some further issues with the dma mask changes on ARM
  which have been found by TI and others, and also some corner cases
  with the updates to the virtual to physical address translations.

  Konstantin also found some problems with the unwinder, which now
  performs tighter verification that the stack is valid while unwinding"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: fix asm/memory.h build error
  ARM: 7917/1: cacheflush: correctly limit range of memory region being flushed
  ARM: 7913/1: fix framepointer check in unwind_frame
  ARM: 7912/1: check stack pointer in get_wchan
  ARM: 7909/1: mm: Call setup_dma_zone() post early_paging_init()
  ARM: 7908/1: mm: Fix the arm_dma_limit calculation
  ARM: another fix for the DMA mapping checks

11 years agoMerge tag 'arc-fixes-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupt...
Linus Torvalds [Sat, 14 Dec 2013 00:14:39 +0000 (16:14 -0800)]
Merge tag 'arc-fixes-for-3.13' of git://git./linux/kernel/git/vgupta/arc

Pull ARC fixes from Vineet Gupta:
 "These are couple of weeks old already, but I just couldn't get them to
  you earlier.

   - couple of fixes for recently added perf code
   - build time extable sort"

* tag 'arc-fixes-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: [perf] Fix a few thinkos
  ARC: Add guard macro to uapi/asm/unistd.h
  ARC: extable: Enable sorting at build time

11 years agoMerge tag 'dm-3.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device...
Linus Torvalds [Fri, 13 Dec 2013 21:22:22 +0000 (13:22 -0800)]
Merge tag 'dm-3.13-fixes' of git://git./linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:
 "A set of device-mapper fixes for 3.13.

  A fix for possible memory corruption during DM table load, fix a
  possible leak of snapshot space in case of a crash, fix a possible
  deadlock due to a shared workqueue in the delay target, fix to
  initialize read-only module parameters that are used to export metrics
  for dm stats and dm bufio.

  Quite a few stable fixes were identified for both the thin-
  provisioning and caching targets as a result of increased regression
  testing using the device-mapper-test-suite (dmts).  The most notable
  of these are the reference counting fixes for the space map btree that
  is used by the dm-array interface -- without these the dm-cache
  metadata will leak, resulting in dm-cache devices running out of
  metadata blocks.  Also, some important fixes related to the
  thin-provisioning target's transition to read-only mode on error"

* tag 'dm-3.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm array: fix a reference counting bug in shadow_ablock
  dm space map: disallow decrementing a reference count below zero
  dm stats: initialize read-only module parameter
  dm bufio: initialize read-only module parameters
  dm cache: actually resize cache
  dm cache: update Documentation for invalidate_cblocks's range syntax
  dm cache policy mq: fix promotions to occur as expected
  dm thin: allow pool in read-only mode to transition to read-write mode
  dm thin: re-establish read-only state when switching to fail mode
  dm thin: always fallback the pool mode if commit fails
  dm thin: switch to read-only mode if metadata space is exhausted
  dm thin: switch to read only mode if a mapping insert fails
  dm space map metadata: return on failure in sm_metadata_new_block
  dm table: fail dm_table_create on dm_round_up overflow
  dm snapshot: avoid snapshot space leak on crash
  dm delay: fix a possible deadlock due to shared workqueue

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Linus Torvalds [Fri, 13 Dec 2013 21:21:28 +0000 (13:21 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/hid

Pull HID fixes from Jiri Kosina:

 - Genius Gx Imperator Keyboard regression fix (missing break in case),
   by Ben Hutchings

 - duplicate sysfs entry error fix for hid-sensor-hub driver, by
   Srinivas Pandruvada

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: hid-sensor-hub: fix duplicate sysfs entry error
  HID: kye: Fix missing break in kye_report_fixup()

11 years agoARM: fix asm/memory.h build error
Russell King [Tue, 10 Dec 2013 19:21:08 +0000 (19:21 +0000)]
ARM: fix asm/memory.h build error

Jason Gunthorpe reports a build failure when ARM_PATCH_PHYS_VIRT is
not defined:

In file included from arch/arm/include/asm/page.h:163:0,
                 from include/linux/mm_types.h:16,
                 from include/linux/sched.h:24,
                 from arch/arm/kernel/asm-offsets.c:13:
arch/arm/include/asm/memory.h: In function '__virt_to_phys':
arch/arm/include/asm/memory.h:244:40: error: 'PHYS_OFFSET' undeclared (first use in this function)
arch/arm/include/asm/memory.h:244:40: note: each undeclared identifier is reported only once for each function it appears in
arch/arm/include/asm/memory.h: In function '__phys_to_virt':
arch/arm/include/asm/memory.h:249:13: error: 'PHYS_OFFSET' undeclared (first use in this function)

Fixes: ca5a45c06cd4 ("ARM: mm: use phys_addr_t appropriately in p2v and v2p conversions")
Tested-By: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
11 years agoMerge tag 'regulator-v3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Fri, 13 Dec 2013 19:39:54 +0000 (11:39 -0800)]
Merge tag 'regulator-v3.13-rc3' of git://git./linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "A small set of driver fixes plus one larger core change which changes
  the way we check to see if we're using DT so that there aren't any
  races between deciding we're using DT and the regulator subsystem
  noticing.

  This makes the new support for substituting a dummy regulator and
  optional regulators work a lot better on DT systems since it ensures
  that we don't trigger probe deferral when we shouldn't which was
  causing bugs in clients"

* tag 'regulator-v3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: pfuze100: allow misprogrammed ID
  regulator: pfuze100: Fix address of FABID
  regulator: as3722: set the correct current limit
  regulator: core: Check for DT every time we check full constraints
  regulator: core: Replace checks of have_full_constraints with a function

11 years agoMerge tag 'regmap-v3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie...
Linus Torvalds [Fri, 13 Dec 2013 19:38:35 +0000 (11:38 -0800)]
Merge tag 'regmap-v3.13-rc3' of git://git./linux/kernel/git/broonie/regmap

Pull regmap fixes from Mark Brown:
 "Two small changes to fix some error handling and checking (both of
  which would be quite serious if the errors trigger) plus a trivial
  documentation fix"

* tag 'regmap-v3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: use IS_ERR() to check clk_get() results
  regmap: make sure we unlock on failure in regmap_bulk_write
  regmap: trivial comment fix (copy'n'paste error)

11 years agoMerge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa...
Linus Torvalds [Fri, 13 Dec 2013 19:37:57 +0000 (11:37 -0800)]
Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
 "Here are two simple but wanted fixes for the i2c subsystem"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: imx: Check the return value from clk_prepare_enable()
  i2c: mux: Inherit retry count and timeout from parent for muxed bus

11 years agoMerge tag 'for-linus-20131212' of git://git.infradead.org/linux-mtd
Linus Torvalds [Fri, 13 Dec 2013 19:31:22 +0000 (11:31 -0800)]
Merge tag 'for-linus-20131212' of git://git.infradead.org/linux-mtd

Pull MTD fixes from Brian Norris:
 "Two MTD fixes, for the pxa3xx-nand driver:

   - This driver was not ready to fully Armada 370 NAND, with
     particularly notable problems seen on flash with 2KB page sizes.
     This "compatible" entry really should have been held back until
     3.14 or later.

   - Fix a bug seen in rare cases on the error path of a failed probe
     attempt, where we free unallocated DMA resources"

* tag 'for-linus-20131212' of git://git.infradead.org/linux-mtd:
  mtd: nand: pxa3xx: Use info->use_dma to release DMA resources
  Partially revert "mtd: nand: pxa3xx: Introduce 'marvell,armada370-nand' compatible string"

11 years agoMerge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dma
Linus Torvalds [Fri, 13 Dec 2013 19:29:51 +0000 (11:29 -0800)]
Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dma

Pull slave-dmaengine fixes from Vinod Koul:
 "Here is the common fixes PULL for dmaengine.

  Dan has been working on fixing the build issues in bunch of drivers.
  Here we have one fixing s3c24xx-dma, along with fix from Russell on
  pl08x.  Also we have Kuninori rcar dma fixes.  The s3c24xx-dma which
  was added in last merge window missed updates to usage of DMA_COMPLETE
  so converting the last driver"

* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
  dma: fix build breakage in s3c24xx-dma
  Fix pl08x warnings
  rcar-hpbdma: initialise plane information when halted
  rcar-hpbdma: fixup channel busy check for double plane
  rcar-hpbdma: add max transfer size
  dma: mmp_pdma: add missing platform_set_drvdata() in mmp_pdma_probe()
  dmaengine: s3c24xx-dma: use DMA_COMPLETE for dma completion status

11 years agodm array: fix a reference counting bug in shadow_ablock
Joe Thornber [Fri, 13 Dec 2013 14:55:55 +0000 (14:55 +0000)]
dm array: fix a reference counting bug in shadow_ablock

An old array block could have its reference count decremented below
zero when it is being replaced in the btree by a new array block.

The fix is to increment the old ablock's reference count just before
inserting a new ablock into the btree.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org # 3.9+
11 years agodm space map: disallow decrementing a reference count below zero
Joe Thornber [Fri, 13 Dec 2013 12:31:08 +0000 (12:31 +0000)]
dm space map: disallow decrementing a reference count below zero

The old behaviour, returning -EINVAL if a ref_count of 0 would be
decremented, was removed in commit f722063 ("dm space map: optimise
sm_ll_dec and sm_ll_inc").  To fix this regression we return an error
code from the mutator function pointer passed to sm_ll_mutate() and have
dec_ref_count() return -EINVAL if the old ref_count is 0.

Add a DMERR to reflect the potential seriousness of this error.

Also, add missing dm_tm_unlock() to sm_ll_mutate()'s error path.

With this fix the following dmts regression test now passes:
 dmtest run --suite cache -n /metadata_use_kernel/

The next patch fixes the higher-level dm-array code that exposed this
regression.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org # 3.12+
11 years agoMerge remote-tracking branch 'regulator/topic/constraints' into regulator-linus
Mark Brown [Fri, 13 Dec 2013 13:44:57 +0000 (13:44 +0000)]
Merge remote-tracking branch 'regulator/topic/constraints' into regulator-linus

11 years agoMerge branch 'master' of git://git.infradead.org/users/pcmoore/selinux_fixes into...
James Morris [Fri, 13 Dec 2013 02:27:55 +0000 (13:27 +1100)]
Merge branch 'master' of git://git.infradead.org/users/pcmoore/selinux_fixes into for-linus

11 years agoMerge branch 'akpm' (fixes from Andrew)
Linus Torvalds [Fri, 13 Dec 2013 02:22:10 +0000 (18:22 -0800)]
Merge branch 'akpm' (fixes from Andrew)

Merge patches from Andrew Morton:
  "13 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm: memcg: do not allow task about to OOM kill to bypass the limit
  mm: memcg: fix race condition between memcg teardown and swapin
  thp: move preallocated PTE page table on move_huge_pmd()
  mfd/rtc: s5m: fix register updating by adding regmap for RTC
  rtc: s5m: enable IRQ wake during suspend
  rtc: s5m: limit endless loop waiting for register update
  rtc: s5m: fix unsuccesful IRQ request during probe
  drivers/rtc/rtc-s5m.c: fix info->rtc assignment
  include/linux/kernel.h: make might_fault() a nop for !MMU
  drivers/rtc/rtc-at91rm9200.c: correct alarm over day/month wrap
  procfs: also fix proc_reg_get_unmapped_area() for !MMU case
  mm: memcg: do not declare OOM from __GFP_NOFAIL allocations
  include/linux/hugetlb.h: make isolate_huge_page() an inline

11 years agomm: memcg: do not allow task about to OOM kill to bypass the limit
Johannes Weiner [Fri, 13 Dec 2013 01:12:35 +0000 (17:12 -0800)]
mm: memcg: do not allow task about to OOM kill to bypass the limit

Commit 4942642080ea ("mm: memcg: handle non-error OOM situations more
gracefully") allowed tasks that already entered a memcg OOM condition to
bypass the memcg limit on subsequent allocation attempts hoping this
would expedite finishing the page fault and executing the kill.

David Rientjes is worried that this breaks memcg isolation guarantees
and since there is no evidence that the bypass actually speeds up fault
processing just change it so that these subsequent charge attempts fail
outright.  The notable exception being __GFP_NOFAIL charges which are
required to bypass the limit regardless.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-bt: David Rientjes <rientjes@google.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomm: memcg: fix race condition between memcg teardown and swapin
Johannes Weiner [Fri, 13 Dec 2013 01:12:34 +0000 (17:12 -0800)]
mm: memcg: fix race condition between memcg teardown and swapin

There is a race condition between a memcg being torn down and a swapin
triggered from a different memcg of a page that was recorded to belong
to the exiting memcg on swapout (with CONFIG_MEMCG_SWAP extension).  The
result is unreclaimable pages pointing to dead memcgs, which can lead to
anything from endless loops in later memcg teardown (the page is charged
to all hierarchical parents but is not on any LRU list) or crashes from
following the dangling memcg pointer.

Memcgs with tasks in them can not be torn down and usually charges don't
show up in memcgs without tasks.  Swapin with the CONFIG_MEMCG_SWAP
extension is the notable exception because it charges the cgroup that
was recorded as owner during swapout, which may be empty and in the
process of being torn down when a task in another memcg triggers the
swapin:

  teardown:                 swapin:

                            lookup_swap_cgroup_id()
                            rcu_read_lock()
                            mem_cgroup_lookup()
                            css_tryget()
                            rcu_read_unlock()
  disable css_tryget()
  call_rcu()
    offline_css()
      reparent_charges()
                            res_counter_charge() (hierarchical!)
                            css_put()
                              css_free()
                            pc->mem_cgroup = dead memcg
                            add page to dead lru

Add a final reparenting step into css_free() to make sure any such raced
charges are moved out of the memcg before it's finally freed.

In the longer term it would be cleaner to have the css_tryget() and the
res_counter charge under the same RCU lock section so that the charge
reparenting is deferred until the last charge whose tryget succeeded is
visible.  But this will require more invasive changes that will be
harder to evaluate and backport into stable, so better defer them to a
separate change set.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agothp: move preallocated PTE page table on move_huge_pmd()
Kirill A. Shutemov [Fri, 13 Dec 2013 01:12:33 +0000 (17:12 -0800)]
thp: move preallocated PTE page table on move_huge_pmd()

Andrey Wagin reported crash on VM_BUG_ON() in pgtable_pmd_page_dtor() with
fallowing backtrace:

  free_pgd_range+0x2bf/0x410
  free_pgtables+0xce/0x120
  unmap_region+0xe0/0x120
  do_munmap+0x249/0x360
  move_vma+0x144/0x270
  SyS_mremap+0x3b9/0x510
  system_call_fastpath+0x16/0x1b

The crash can be reproduce with this test case:

  #define _GNU_SOURCE
  #include <sys/mman.h>
  #include <stdio.h>
  #include <unistd.h>

  #define MB (1024 * 1024UL)
  #define GB (1024 * MB)

  int main(int argc, char **argv)
  {
char *p;
int i;

p = mmap((void *) GB, 10 * MB, PROT_READ | PROT_WRITE,
MAP_PRIVATE | MAP_ANONYMOUS | MAP_FIXED, -1, 0);
for (i = 0; i < 10 * MB; i += 4096)
p[i] = 1;
mremap(p, 10 * MB, 10 * MB, MREMAP_FIXED | MREMAP_MAYMOVE, 2 * GB);
return 0;
  }

Due to split PMD lock, we now store preallocated PTE tables for THP
pages per-PMD table.  It means we need to move them to other PMD table
if huge PMD moved there.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Andrey Vagin <avagin@openvz.org>
Tested-by: Andrey Vagin <avagin@openvz.org>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomfd/rtc: s5m: fix register updating by adding regmap for RTC
Krzysztof Kozlowski [Fri, 13 Dec 2013 01:12:31 +0000 (17:12 -0800)]
mfd/rtc: s5m: fix register updating by adding regmap for RTC

Rename old regmap field of "struct sec_pmic_dev" to "regmap_pmic" and
add new regmap for RTC.

On S5M8767A registers were not properly updated and read due to usage of
the same regmap as the PMIC.  This could be observed in various hangs,
e.g.  in infinite loop during waiting for UDR field change.

On this chip family the RTC has different I2C address than PMIC so
additional regmap is needed.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Mark Brown <broonie@linaro.org>
Acked-by: Sangbeom Kim <sbkim73@samsung.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agortc: s5m: enable IRQ wake during suspend
Krzysztof Kozlowski [Fri, 13 Dec 2013 01:12:30 +0000 (17:12 -0800)]
rtc: s5m: enable IRQ wake during suspend

Add PM suspend/resume ops to rtc-s5m driver and enable IRQ wake during
suspend so the RTC would act like a wake up source.  This allows waking
up from suspend to RAM on RTC alarm interrupt.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Mark Brown <broonie@linaro.org>
Acked-by: Sangbeom Kim <sbkim73@samsung.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agortc: s5m: limit endless loop waiting for register update
Krzysztof Kozlowski [Fri, 13 Dec 2013 01:12:28 +0000 (17:12 -0800)]
rtc: s5m: limit endless loop waiting for register update

After setting alarm or time the driver is waiting for UDR register to be
cleared indicating that registers data have been transferred.

Limit the endless loop to only 5 retries.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Mark Brown <broonie@linaro.org>
Acked-by: Sangbeom Kim <sbkim73@samsung.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agortc: s5m: fix unsuccesful IRQ request during probe
Krzysztof Kozlowski [Fri, 13 Dec 2013 01:12:26 +0000 (17:12 -0800)]
rtc: s5m: fix unsuccesful IRQ request during probe

Probe failed for rtc-s5m:

s5m-rtc s5m-rtc: Failed to request alarm IRQ: 12: -22
s5m-rtc: probe of s5m-rtc failed with error -22

Fix rtc-s5m interrupt request by using regmap_irq_get_virq() for mapping
the IRQ.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Mark Brown <broonie@linaro.org>
Acked-by: Sangbeom Kim <sbkim73@samsung.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agodrivers/rtc/rtc-s5m.c: fix info->rtc assignment
Geert Uytterhoeven [Fri, 13 Dec 2013 01:12:25 +0000 (17:12 -0800)]
drivers/rtc/rtc-s5m.c: fix info->rtc assignment

Fix this warning:

  drivers/rtc/rtc-s5m.c: In function `s5m_rtc_probe':
  drivers/rtc/rtc-s5m.c:545: warning: assignment from incompatible pointer type

struct s5m_rtc_info.rtc has type "struct regmap *", while
struct sec_pmic_dev.rtc has type "struct i2c_client *".

Probably the author wanted to assign "struct sec_pmic_dev.regmap", which
has the correct type.

Also, as "rtc" doesn't make much sense as a name for a regmap, rename it
to "regmap".

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Sangbeom Kim <sbkim73@samsung.com>
Cc: Sachin Kamat <sachin.kamat@linaro.org>
Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoinclude/linux/kernel.h: make might_fault() a nop for !MMU
Axel Lin [Fri, 13 Dec 2013 01:12:24 +0000 (17:12 -0800)]
include/linux/kernel.h: make might_fault() a nop for !MMU

The machine cannot fault if !MUU, so make might_fault() a nop for !MMU.

This fixes below build error if
!CONFIG_MMU && (CONFIG_PROVE_LOCKING=y || CONFIG_DEBUG_ATOMIC_SLEEP=y):

  arch/arm/kernel/built-in.o: In function `arch_ptrace':
  arch/arm/kernel/ptrace.c:852: undefined reference to `might_fault'
  arch/arm/kernel/built-in.o: In function `restore_sigframe':
  arch/arm/kernel/signal.c:173: undefined reference to `might_fault'
  ...
  arch/arm/kernel/built-in.o:arch/arm/kernel/signal.c:177: more undefined references to `might_fault' follow
  make: *** [vmlinux] Error 1

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agodrivers/rtc/rtc-at91rm9200.c: correct alarm over day/month wrap
Linus Pizunski [Fri, 13 Dec 2013 01:12:23 +0000 (17:12 -0800)]
drivers/rtc/rtc-at91rm9200.c: correct alarm over day/month wrap

Update month and day of month to the alarm month/day instead of current
day/month when setting the RTC alarm mask.

Signed-off-by: Linus Pizunski <linus@narrativeteam.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoprocfs: also fix proc_reg_get_unmapped_area() for !MMU case
Jan Beulich [Fri, 13 Dec 2013 01:12:22 +0000 (17:12 -0800)]
procfs: also fix proc_reg_get_unmapped_area() for !MMU case

Commit fad1a86e25e0 ("procfs: call default get_unmapped_area on
MMU-present architectures"), as its title says, took care of only the
MMU case, leaving the !MMU side still in the regressed state (returning
-EIO in all cases where pde->proc_fops->get_unmapped_area is NULL).

From the fad1a86e25e0 changelog:

 "Commit c4fe24485729 ("sparc: fix PCI device proc file mmap(2)") added
  proc_reg_get_unmapped_area in proc_reg_file_ops and
  proc_reg_file_ops_no_compat, by which now mmap always returns EIO if
  get_unmapped_area method is not defined for the target procfs file, which
  causes regression of mmap on /proc/vmcore.

  To address this issue, like get_unmapped_area(), call default
  current->mm->get_unmapped_area on MMU-present architectures if
  pde->proc_fops->get_unmapped_area, i.e.  the one in actual file operation
  in the procfs file, is not defined"

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: <stable@vger.kernel.org> [3.12.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomm: memcg: do not declare OOM from __GFP_NOFAIL allocations
Johannes Weiner [Fri, 13 Dec 2013 01:12:20 +0000 (17:12 -0800)]
mm: memcg: do not declare OOM from __GFP_NOFAIL allocations

Commit 84235de394d9 ("fs: buffer: move allocation failure loop into the
allocator") started recognizing __GFP_NOFAIL in memory cgroups but
forgot to disable the OOM killer.

Any task that does not fail allocation will also not enter the OOM
completion path.  So don't declare an OOM state in this case or it'll be
leaked and the task be able to bypass the limit until the next
userspace-triggered page fault cleans up the OOM state.

Reported-by: William Dauchy <wdauchy@gmail.com>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: <stable@vger.kernel.org> [3.12.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoinclude/linux/hugetlb.h: make isolate_huge_page() an inline
Naoya Horiguchi [Fri, 13 Dec 2013 01:12:19 +0000 (17:12 -0800)]
include/linux/hugetlb.h: make isolate_huge_page() an inline

With CONFIG_HUGETLBFS=n:

  mm/migrate.c: In function `do_move_page_to_node_array':
  include/linux/hugetlb.h:140:33: warning: statement with no effect [-Wunused-value]
   #define isolate_huge_page(p, l) false
                                   ^
  mm/migrate.c:1170:4: note: in expansion of macro `isolate_huge_page'
      isolate_huge_page(page, &pagelist);

Reported-by: Borislav Petkov <bp@alien8.de>
Tested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoMerge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Linus Torvalds [Thu, 12 Dec 2013 23:46:06 +0000 (15:46 -0800)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:
 "Four security fixes for KVM on x86.  Thanks to Andrew Honig and Lars
  Bull from Google for reporting them"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: fix guest-initiated crash with x2apic (CVE-2013-6376)
  KVM: x86: Convert vapic synchronization to _cached functions (CVE-2013-6368)
  KVM: x86: Fix potential divide by 0 in lapic (CVE-2013-6367)
  KVM: Improve create VCPU parameter (CVE-2013-4587)

11 years agoMerge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm...
Linus Torvalds [Thu, 12 Dec 2013 23:45:03 +0000 (15:45 -0800)]
Merge tag 'fixes-for-linus' of git://git./linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "Another week, another batch of fixes.

  Again, OMAP regressions due to move to DT is the bulk of the changes
  here, but this should be the last of it for 3.13.  There are also a
  handful of OMAP hwmod changes (power management, reset handling) for
  USB on OMAP3 that fixes some longish-standing bugs around USB resets.

  There are a couple of other changes that also add up line count a bit:
  One is a long-standing bug with the keyboard layout on one of the PXA
  platforms.  The other is a fix for highbank that moves their
  power-off/reset button handling to be done in-kernel since relying on
  userspace to handle it was fragile and awkward"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: sun6i: dt: Fix interrupt trigger types
  ARM: sun7i: dt: Fix interrupt trigger types
  MAINTAINERS: merge IMX6 entry into IMX
  ARM: tegra: add missing break to fuse initialization code
  ARM: pxa: prevent PXA270 occasional reboot freezes
  ARM: pxa: tosa: fix keys mapping
  ARM: OMAP2+: omap_device: add fail hook for runtime_pm when bad data is detected
  ARM: OMAP2+: hwmod: Fix usage of invalid iclk / oclk when clock node is not present
  ARM: OMAP3: hwmod data: Don't prevent RESET of USB Host module
  ARM: OMAP2+: hwmod: Fix SOFTRESET logic
  ARM: OMAP4+: hwmod data: Don't prevent RESET of USB Host module
  ARM: dts: Fix booting for secure omaps
  ARM: OMAP2+: Fix the machine entry for am3517
  ARM: dts: Fix missing entries for am3517
  ARM: OMAP2+: Fix overwriting hwmod data with data from device tree
  ARM: davinci: Fix McASP mem resource names
  ARM: highbank: handle soft poweroff and reset key events
  ARM: davinci: fix number of resources passed to davinci_gpio_register()
  gpio: davinci: fix check for unbanked gpio

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux...
Linus Torvalds [Thu, 12 Dec 2013 23:25:10 +0000 (15:25 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mason/linux-btrfs

Pull btrfs fixes from Chris Mason:
 "This is a small collection of fixes.  It was rebased this morning, but
  I was just fixing signed-off-by tags with the wrong email"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: fix access_ok() check in btrfs_ioctl_send()
  Btrfs: make sure we cleanup all reloc roots if error happens
  Btrfs: skip building backref tree for uuid and quota tree when doing balance relocation
  Btrfs: fix an oops when doing balance relocation
  Btrfs: don't miss skinny extent items on delayed ref head contention
  btrfs: call mnt_drop_write after interrupted subvol deletion
  Btrfs: don't clear the default compression type

11 years agoMerge branch 'for-3.13' of git://linux-nfs.org/~bfields/linux
Linus Torvalds [Thu, 12 Dec 2013 23:24:32 +0000 (15:24 -0800)]
Merge branch 'for-3.13' of git://linux-nfs.org/~bfields/linux

Pull nfsd reply cache bugfix from Bruce Fields:
 "One bugfix for nfsd crashes"

* 'for-3.13' of git://linux-nfs.org/~bfields/linux:
  nfsd: when reusing an existing repcache entry, unhash it first

11 years agomtd: nand: pxa3xx: Use info->use_dma to release DMA resources
Ezequiel Garcia [Tue, 10 Dec 2013 12:57:15 +0000 (09:57 -0300)]
mtd: nand: pxa3xx: Use info->use_dma to release DMA resources

In commit:

  commit 62e8b851783138a11da63285be0fbf69530ff73d
  Author: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
  Date:   Fri Oct 4 15:30:38 2013 -0300

  mtd: nand: pxa3xx: Allocate data buffer on detected flash size

the way the buffer is allocated was changed: the first READ_ID is issued
with a small kmalloc'ed buffer. Only once the flash page size is detected
the DMA buffers are allocated, and info->use_dma is set.

Currently, if the device detection fails, the driver checks the 'use_dma'
module parameter and tries to release unallocated DMA resources.

Fix this by checking the proper indicator of the DMA allocation, which
is 'info->use_dma'.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>