staging/lustre: use osc_reply_portal for OUT services

OUT service is used to server both MDS-MDS updates and MDS-OST
therefore services on MDT and OST are set to use the same request
and reply portals to be fully unified and able to serve any type
of requests.

Signed-off-by: Mikhail Pershin <mike.pershin@intel.com>
Reviewed-on: http://review.whamcloud.com/8390
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3467
Reviewed-by: wangdi <di.wang@intel.com>
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: lustre: Fix 'code indent should use tabs where possible' errors

Fix checkpatch.pl 'code indent should use tabs where possible' errors

Signed-off-by: Greg Donald <gdonald@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: lustre: Fix "space prohibited after that open parenthesis '('" errors

Fix checkpatch.pl "space prohibited after that open parenthesis '('" errors

Signed-off-by: Greg Donald <gdonald@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200_common: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: hwdrv_apci3120: remove void function return statement

Returns at the end of void functions are useless.  Remove this one.

Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: hwdrv_apci3120: else is not useful after return

The statement nested in an else after a return may be brought out one
indent level, the else is useless.

Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: hwdrv_apci3120: add a blank line after declarations

Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: hwdrv_apci3120: clean up comments

This patch fixes improper comment indentation, removes dead code and
obsolete comments, and conforms remaining comments to a consistent kernel
commenting style.

Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbduxsigma: prevent "empty acquisition" async commands

This driver currently allows a cmd->stop_src == TRIG_COUNT with a cmd->stop_arg
of 0 for both the analog input and output async commands. The (*do_cmd) for
both subdevices sets up and starts the command without handling the "empty
acquisition". This results in the interrupt functions trying to transfer 0 data
samples.

Validate that the cmd->stop_arg is >= 1 in the (*do_cmdtest) to prevent the
"empty acquisition".

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: prevent "empty acquisition" async commands

This driver currently allows a cmd->stop_src == TRIG_COUNT with a cmd->stop_arg
of 0 for both the analog input and output async commands. The (*do_cmd) for
both subdevices sets up and starts the command without handling the "empty
acquisition". This results in the interrupt functions trying to transfer 0 data
samples.

Validate that the cmd->stop_arg is >= 1 in the (*do_cmdtest) to prevent the
"empty acquisition".

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: fix cmd->stop_arg validation for stop_src == TRIG_COUNT

The only limit for the stop_arg with a stop_src == TRIG_COUNT is that there is at
least 1 scan in order to prevent an empty acquisition. The max test is bogus.

Fix the validation.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: 'ai_sample_count' is always 'stop_arg'

When the cmd->stop_src == TRIG_COUNT, the 'ai_sample_count' is the cmd->stop_arg.
For a stop_src == TRIG_NONE the 'ai_sample_count' is currently set to 1 but the
driver never actually uses the value.

Simplify the 'stop_count' initialization by just setting it to the cmd->stop_arg.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: clarify COMEDI_CB_EOA code

The end-of-acquisition only applies when the cmd->stop_src == TRIG_COUNT.

Refactor the code in s626_handle_eos_interrupt() that detects the end-of-
acquisition to clarify this.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: remove 'ai_continuous' from private data

This member of the private data is set based on the cmd->stop_src. Just use the
cmd->stop_src directly and remove the member.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rtd520: prevent "empty acquisition" async command

This driver currently allows a cmd->stop_src == TRIG_COUNT with a cmd->stop_arg
of 0. The (*do_cmd) then sets up and starts the command without handling the "empty
acquisition". This results in the interrupt function trying to transfer 0 data
samples.

Validate that the cmd->stop_arg is >= 1 in the (*do_cmdtest) to prevent the
"empty acquisition".

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmuio: return void from pcmuio_start_intr()

This function always returns '0' so the comedi_event() is never done by the
callers.

Change the return type to void and remove the comedi_event() dead code.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmuio: 'stop_count' is always 'stop_arg'

When the cmd->stop_src == TRIG_COUNT, the 'stop_count' is the cmd->stop_arg.
For any other stop_src the 'stop_count' is 0, which is also the cmd->stop_arg.

Simplify the 'stop_count' initialization.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmuio: remove 'continuous' from private data

This member of the private data is set based on the cmd->stop_src. Just use the
cmd->stop_src directly and remove the member.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmuio: remove "empty acquisition" async command

This driver currently allows a cmd->stop_src == TRIG_COUNT with a cmd->stop_arg
of 0. This causes the (*do_cmd) to immediately generate a COMEDI_CB_EOA event
without acquiring any data.

This "empty acquisition" async command is not really useful. Validate that the
cmd->stop_arg is >= 1 in the (*do_cmdtest) and remove the "empty acquisition"
code.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmmio: return void from pcmmio_start_intr()

This function always returns '0' so the comedi_event() is never done by the
callers.

Change the return type to void and remove the comedi_event() dead code.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmmio: 'stop_count' is always 'stop_arg'

When the cmd->stop_src == TRIG_COUNT, the 'stop_count' is the cmd->stop_arg.
For any other stop_src the 'stop_count' is 0, which is also the cmd->stop_arg.

Simplify the 'stop_count' initialization.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmmio: remove "empty acquisition" async command

This driver currently allows a cmd->stop_src == TRIG_COUNT with a cmd->stop_arg
of 0. This causes the (*do_cmd) to immediately generate a COMEDI_CB_EOA event
without acquiring any data.

This "empty acquisition" async command is not really useful. Validate that the
cmd->stop_arg is >= 1 in the (*do_cmdtest) and remove the "empty acquisition"
code.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl711: remove "empty acquisition" async command

This driver currently allows a cmd->stop_src == TRIG_COUNT with a cmd->stop_arg
of 0. This causes the (*do_cmd) to immediately generate a COMEDI_CB_EOA event
without acquiring any data.

This "empty acquisition" async command is not really useful. Validate that the
cmd->stop_arg is >= 1 in the (*do_cmdtest) and remove the "empty acquisition"
code.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_pcidio: prevent "empty acquisition" async command

This driver currently allows a cmd->stop_src == TRIG_COUNT with a cmd->stop_arg
of 0. The (*do_cmd) then sets up and starts the command without handling the "empty
acquisition". This results in the interrupt function trying to transfer 0 data
samples.

Validate that the cmd->stop_arg is >= 1 in the (*do_cmdtest) to prevent the
"empty acquisition".

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_atmio16d: prevent "empty acquisition" async command

This driver currently allows a cmd->stop_src == TRIG_COUNT with a cmd->stop_arg
of 0. The (*do_cmd) then sets up and starts the command without handling the "empty
acquisition". This results in the interrupt function trying to transfer 0 data
samples.

Validate that the cmd->stop_arg is >= 1 in the (*do_cmdtest) to prevent the
"empty acquisition".

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: me4000: validate cmd->stop_arg in step 3 of (*do_cmdtest)

The async command arguments are supposed to be trivially validated in step 3
of the (*do_cmdtest). Fix the validation of the stop_arg.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt282x: prevent "empty acquisition" async commands

This driver currently allows a cmd->stop_src == TRIG_COUNT with a cmd->stop_arg
of 0 for both the analog input and output async commands. The (*do_cmd) for
both subdevices sets up and starts the command without handling the "empty
acquisition". This results in the interrupt functions trying to transfer 0 data
samples.

Validate that the cmd->stop_arg is >= 1 in the (*do_cmdtest) to prevent the
"empty acquisition".

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16m1: prevent "empty acquisition" async command

This driver currently allows a cmd->stop_src == TRIG_COUNT with a cmd->stop_arg
of 0. The (*do_cmd) then sets up and starts the command without handling the "empty
acquisition". This results in the interrupt function trying to transfer 0 data
samples.

Validate that the cmd->stop_arg is >= 1 in the (*do_cmdtest) to prevent the
"empty acquisition".

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16: prevent "empty acquisition" async command

This driver currently allows a cmd->stop_src == TRIG_COUNT with a cmd->stop_arg
of 0. The (*do_cmd) then sets up and starts the command without handling the "empty
acquisition". This results in the interrupt function trying to transfer 0 data
samples.

Validate that the cmd->stop_arg is >= 1 in the (*do_cmdtest) to prevent the
"empty acquisition".

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_pcidas: prevent "empty acquisition" async commands

This driver currently allows a cmd->stop_src == TRIG_COUNT with a cmd->stop_arg
of 0 for both the analog input and output async commands. The (*do_cmd) for
both subdevices sets up and starts the command without handling the "empty
acquisition". This results in the interrupt functions trying to transfer 0 data
samples.

Validate that the cmd->stop_arg is >= 1 in the (*do_cmdtest) to prevent the
"empty acquisition".

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci230: 'ai_scan_count' is always 'stop_arg'

When the cmd->stop_src == TRIG_COUNT, the 'ai_scan_count' is the cmd->stop_arg.
For any other stop_src the 'ai_scan_count' is 0, which is also the cmd->stop_arg.

Simplify the 'ai_scan_count' initialization.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci230: remove analog input "empty acquisition" async command

This driver currently allows a cmd->stop_src == TRIG_COUNT with a cmd->stop_arg
of 0. This causes the (*do_cmd) to immediately generate a COMEDI_CB_EOA event
without acquiring any data.

This "empty acquisition" async command is not really useful. Validate that the
cmd->stop_arg is >= 1 in the (*do_cmdtest) and remove the "empty acquisition"
code.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci230: 'ao_scan_count' is always 'stop_arg'

When the cmd->stop_src == TRIG_COUNT, the 'ao_scan_count' is the cmd->stop_arg.
For any other stop_src the 'ao_scan_count' is 0, which is also the cmd->stop_arg.

Simplify the 'ao_scan_count' initialization.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci230: remove analog output "empty acquisition" async command

This driver currently allows a cmd->stop_src == TRIG_COUNT with a cmd->stop_arg
of 0. This causes the (*do_cmd) to immediately generate a COMEDI_CB_EOA event
without acquiring any data.

This "empty acquisition" async command is not really useful. Validate that the
cmd->stop_arg is >= 1 in the (*do_cmdtest) and remove the "empty acquisition"
code.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci224: remove "empty acquisition" async command

This driver currently allows a cmd->stop_src == TRIG_COUNT with a cmd->stop_arg
of 0. This causes the (*do_cmd) to immediately generate a COMEDI_CB_EOA event
without acquiring any data.

This "empty acquisition" async command is not really useful. Validate that the
cmd->stop_arg is >= 1 in the (*do_cmdtest) and remove the "empty acquisition"
code.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200_common: return void from dio200_start_intr()

This function always returns '0' so the comedi_event() is never done by the
callers.

Change the return type to void and remove the comedi_event() dead code.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200_common: 'stopcount' is always 'stop_arg'

When the cmd->stop_src == TRIG_COUNT, the 'stopcount' is the cmd->stop_arg. When
the stop_src == TRIG_NONE the 'stopcount' is 0, which is also the cmd->stop_arg.

Simplify the 'stopcount' initialization.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200_common: remove "empty acquisition" async command

This driver currently allows a cmd->stop_src == TRIG_COUNT with a cmd->stop_arg
of 0. This causes the (*do_cmd) to immediatelt generate a COMEDI_CB_EOA event
without acquiring any data.

This "empty acquisition" async command is not really useful. Validate that the
cmd->stop_arg is >= 1 in the (*do_cmdtest) and remove the "empty acquisition"
code.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_2032: absorb apci2032_int_start()

This function always returns 'false' so the caller never does the comedi_event().

Absorb the function into the caller and remove the 'do_event' dead code.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_2032: remove "empty acquisition" async command

This driver currently allows a cmd->stop_src == TRIG_COUNT with a cmd->stop_arg
of 0. This causes the (*do_cmd) to immediatelt generate a COMEDI_CB_EOA event
without acquiring any data.

This "empty acquisition" async command is not really useful. Validate that the
cmd->stop_arg is >= 1 in the (*do_cmdtest) and remove the "empty acquisition"
code.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: move pci9118_ai_cmdtest()

For aesthetics, move this function closer to the (*do_cmd).

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: absorb DMA and non-DMA helpers

Currently the pci9118_ai_docmd_dma() or pci9118_ai_docmd_sampl() helper
is called by the (*do_cmd) to do the final setup for the command. Most
of this invloves setting various bits in 'ai_ctrl' and 'int_ctrl' to
setup the acquisition based on the 'ai_do' mode. Most of this is the
same for the DMA and non-DMA setup. The differences are easily handled
by either checking the cmd trigger sources or if DMA is used.

Absorb the helper functions into the (*do_cmd) to clarify the code.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: clarify async command start

The async command can start immediately (TRIG_NOW), from an internal
trigger (TRIG_INT), or from an external trigger (TRIG_EXT). Currently
the start of the command is scattered in the DMA and non-DMA helper
functions.

Consolidate the start of the async command at the end of the (*do_cmd)
function. For aesthetics, use the 'cmd->start_src' directly instead
of the 'ai12_startstop' in the private data to determine how to start
the command. This also fixes a minor bug where the external trigger
gets enabled for a start_src == TRIG_INT.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: introduce pci9118_ai_cmd_start()

Introduce a helper function to start the async command.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: enable DMA in common code path

The pci9118_ai_docmd_dma() function enables the DMA bit in the ai control
register for all acquisition modes. For aesthetics, move the enable of
this bit into the (*do_cmd).

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: tidy up 'ai_cfg' in pci9118_ai_docmd_dma()

The 'ai_cfg' was already set to PCI9118_AI_CFG_PDTRG | PCI9118_AI_CFG_PETRG.
Don't bother setting those bits in pci9118_ai_docmd_dma().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: clarify acquisition mode (ai_do) determination

The async command can operation in 4 modes in this driver.

Modes 1 and 4 use timers 1 and 2 as a cascaded timer to trigger each conversion.
Mode 1 begins the acquisitions immediately (scan_begin_src == TRIG_FOLLOW) and
Mode 4 begins after an external trigger (scan_begin_src == TRIG_EXT). Both modes
use a convert_src == TRIG_TIMER.

Mode 2 uses timers 1 and 2 in a double timed action (scan_begin_src == TRIG_TIMER
and convert_src != TRIG_EXT (TRIG_TIMER and TRIG_NOW are valid)).

Mode 3 does not use the timers. Each acquisition is triggered by an external
signal (scan_begin_src == TRIG_FOLLOW and convert_src == TRIG_EXT.

The (*do_cmdtest) validates the scan_begin_src as TRIG_FOLLOW, TRIG_TIMER,
or TRIG_EXT. Remove the invalid check for TRIG_INT in the (*do_cmd).

Clarify the logic used to determine the mode in the (*do_cmd).

Also, simplify pci9118_calc_divisors(). Call i8253_cascade_ns_to_timer() directly
in the (*do_cmd) for the mode 1 and mode 4 cases. Call pci9118_calc_divisors()
only for mode 2 acquisitions.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: TRIG_INT is not a valid scan_begin_src

The (*do_cmdtest) validates the scan_begin_src as TRIG_FOLLOW, TRIG_TIMER,
or TRIG_EXT. Remove the invalid check for TRIG_INT in the (*do_cmd).

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: remove sanity checks in pci9118_calc_divisors()

The 'tim2' parameter to this function is actually the cmd->convert_arg which
was validated in the (*do_cmdtest) as:

err |= cfc_check_trigger_arg_min(&cmd->convert_arg,
 devprivriv->ai_ns_min);

The sanity checks in this function are just repeating that validation. The
'min_pacer' sanity check is simply not needed.

Remove these unnecessary checks.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: tidy up pci9118_set_chanlist()

Define some macros to set the 'chan' and 'range' bits in the chanlist
register. Use them to tidy up this function.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: absorb pci9118_ai_set_range_aref()

This function is called by the analog input (*insn_read) and (*do_cmd)
operations. The pci9118_set_chanlist() function is also called by those
operations. Setting the range and aref logically belongs with setting
the chanlist. To clarify the code, absorb pci9118_ai_set_range_aref()
into pci9118_set_chanlist().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: rename setup_channel_list()

Rename this function so it has namespace associated with the driver.

Also, this function always succeeds. Change the return type to void
and remove the unnecessary error handling by the callers.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: remove unused parameters from setup_channel_list()

The 'rot' and 'usedma' parameters are not used in this function. Remove them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: merge pci9118_exttrg_{add,del}()

For aesthetics, merge these two helper functions and add a parameter,
'enable', to determine if the external trigger is being added (enabled)
or deleted (disabled).

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: exttrg source is always EXTTRG_AI

The 'source'  passed to pci9118_exttrg_{add,del}() is always EXTTRG_AI.
Remove the parameter and unnecessary sanity checking. Also, since there
is only one vaild exttrg source, remove the unnecessary 'exttrg_users'
member from the private data.

The pci9118_exttrg_{add,del}() functions always succeed. For aesthetics
change the return type to void.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: fix interrupt_pci9118_ai_mode4_switch()

This function modifies the analog input acquistion programming after the first
DMA cycle to continue a "mode4" acqusition. Part of this programs timer 0 based
on the hardware address of the next buffer. When double buffering is not used
for DMA the "next" buffer is always the first, and only, buffer.

Add a parameter to this function to indicate what the "next" buffer actually is
and fix the callers.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: change type of pci9118_dmabuf 'virt' member

For aesthetics, change the type of this member to avoid the casts when allocating
and freeing the DMA buffers. This does introduce a cast in move_block_from_dma()
but that cast is cleaner.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: introduce struct pci9118_dmabuf

For aesthetics, wrap the DMA buffer information in a struct.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: remove 'dmabuf_used_size' from private data

This member of the private data is set but never used. Just remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: convert private data true/false flags to bit-fields

For aesthetics convert the private data true/false flags to bit-fields. The
'usemux' member is used in the driver as a flag. Refactor the analog input
subdevice init so this member can also be a bit-field.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: remove 'dmabuf_panic_size' from private data

This member of the private data is only used in some #if 0'ed code. Remove
it along with the unused code.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: remove PCI9118_PARANOIDCHECK code

The comment states that paramoid checks are broken. They also would only
work for 12-bit analog input samples.

Instead of fixing the paranoid checking just remove it to simplify the
driver a bit.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: do cfc_handle_events() at end of interrupt

Each of the error detections currently do a cfc_handle_events() and exits
the interrupt handler if the error is detected. The DMA and non-DMA handlers
also to a cfc_handle_events().

For aesthetics, use goto to exit the interrupt handler if an error is detected
and move the cfc_handle_events() call to the end of the interrupt.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: handle hardware errors in interrupt handler

Hardware errors will now always terminate an async command. For aesthetics,
absorb pci9118_decode_error_status() into the interrupt handler and use
the register map defines to remove the "magic" numbers. Refactor the code
to set the appropriate comedi event bits and handle the event.

Remove the unnecessary 'ai_maskerr' and 'ai_maskharderr' members from the
private data.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: handle error detection in main interrupt handler

The DMA and non-DMA both check the analog input status value to detect
hardware errors. For aesthetics, move the this detection into the main
interrupt handler. This allows removing the unused 'int_adstat' parameter
from the  DMA and non-DMA handlers. In addition, the 'int_daq' parameter
is also not used so remove it also.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: handle master/target abort in main interrupt handler

For aesthetics, move the master/target abort detection from the DMA handler to the
main interrupt handler. This allows removing the unused 'int_amcc' parameter from
the DMA and non-DMA handlers.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: don't ignore hardware errors

The legacy (*attach) currently allows the user to pass a mask of error conditions
to ignore when running async commands. Remove this support so that the async
command is always terminated if the hardware reports an error.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: always try to use interrupt and DMA

This driver currently supports both the (*auto_attach) and legacy (*attach)
mechanisms. The (*auto_attach) always tries to use the interrupt and DMA to
support async commands with the analog input subdevice. The legacy (*attach)
only enables them depending on a user option that is passed to the (*attach).
The 'default' (i.e. option == 0) is to enable both the interrupt and DMA.

Simplify the attach by always trying to enable the interrupt and DMA.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: DMA requires an interrupt

In order for DMA to work we also need an interrupt. Refactor the code
so that the DMA allocation is only done if the interrupt is available.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: factor out DMA alloc/free

For aesthetics, factor the DMA allocation/free code out of the attach
and detach functions.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: vmk80xx: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rti800: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rtd520: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmuio: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmad: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl818: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl816: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl812: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl730: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl726: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl724: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl711: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_pcimio: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_labpc_isadma: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_labpc_common: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_atmio: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_atmio16d: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_at_ao: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_at_a2150: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_660x: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_65xx: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: me4000: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt3000: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt282x: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt2811: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt2801: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das800: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das6402: replace comedi_board() calls

The `comedi_board(dev)` inline function calls just return
`dev->board_ptr`.  Expand the inline function calls.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>