git.stricted.de - GitHub/LineageOS/android_kernel_motorola

bpf: fix sanitation rewrite in case of non-pointers

commit 3612af783cf52c74a031a2f11b82247b2599d3cd upstream.

Marek reported that he saw an issue with the below snippet in that
timing measurements where off when loaded as unpriv while results
were reasonable when loaded as privileged:

    [...]
    uint64_t a = bpf_ktime_get_ns();
    uint64_t b = bpf_ktime_get_ns();
    uint64_t delta = b - a;
    if ((int64_t)delta > 0) {
    [...]

Turns out there is a bug where a corner case is missing in the fix
d3bd7413e0ca ("bpf: fix sanitation of alu op with pointer / scalar
type from different paths"), namely fixup_bpf_calls() only checks
whether aux has a non-zero alu_state, but it also needs to test for
the case of BPF_ALU_NON_POINTER since in both occasions we need to
skip the masking rewrite (as there is nothing to mask).

Fixes: d3bd7413e0ca ("bpf: fix sanitation of alu op with pointer / scalar type from different paths")
Reported-by: Marek Majkowski <marek@cloudflare.com>
Reported-by: Arthur Fabre <afabre@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/netdev/CAJPywTJqP34cK20iLM5YmUMz9KXQOdu1-+BZrGMAGgLuBWz7fg@mail.gmail.com/T/
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Balbir Singh <sblbir@amzn.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: do not restore dst_reg when cur_state is freed

commit 0803278b0b4d8eeb2b461fb698785df65a725d9e upstream.

Syzkaller hit 'KASAN: use-after-free Write in sanitize_ptr_alu' bug.

Call trace:

  dump_stack+0xbf/0x12e
  print_address_description+0x6a/0x280
  kasan_report+0x237/0x360
  sanitize_ptr_alu+0x85a/0x8d0
  adjust_ptr_min_max_vals+0x8f2/0x1ca0
  adjust_reg_min_max_vals+0x8ed/0x22e0
  do_check+0x1ca6/0x5d00
  bpf_check+0x9ca/0x2570
  bpf_prog_load+0xc91/0x1030
  __se_sys_bpf+0x61e/0x1f00
  do_syscall_64+0xc8/0x550
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fault injection trace:

  kfree+0xea/0x290
  free_func_state+0x4a/0x60
  free_verifier_state+0x61/0xe0
  push_stack+0x216/0x2f0           <- inject failslab
  sanitize_ptr_alu+0x2b1/0x8d0
  adjust_ptr_min_max_vals+0x8f2/0x1ca0
  adjust_reg_min_max_vals+0x8ed/0x22e0
  do_check+0x1ca6/0x5d00
  bpf_check+0x9ca/0x2570
  bpf_prog_load+0xc91/0x1030
  __se_sys_bpf+0x61e/0x1f00
  do_syscall_64+0xc8/0x550
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

When kzalloc() fails in push_stack(), free_verifier_state() will free
current verifier state. As push_stack() returns, dst_reg was restored
if ptr_is_dst_reg is false. However, as member of the cur_state,
dst_reg is also freed, and error occurs when dereferencing dst_reg.
Simply fix it by testing ret of push_stack() before restoring dst_reg.

Fixes: 979d63d50c0c ("bpf: prevent out of bounds speculation on pointer arithmetic")
Signed-off-by: Xu Yu <xuyu@linux.alibaba.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: fix inner map masking to prevent oob under speculation

commit 9d5564ddcf2a0f5ba3fa1c3a1f8a1b59ad309553 upstream.

During review I noticed that inner meta map setup for map in
map is buggy in that it does not propagate all needed data
from the reference map which the verifier is later accessing.

In particular one such case is index masking to prevent out of
bounds access under speculative execution due to missing the
map's unpriv_array/index_mask field propagation. Fix this such
that the verifier is generating the correct code for inlined
lookups in case of unpriviledged use.

Before patch (test_verifier's 'map in map access' dump):

  # bpftool prog dump xla id 3
     0: (62) *(u32 *)(r10 -4) = 0
     1: (bf) r2 = r10
     2: (07) r2 += -4
     3: (18) r1 = map[id:4]
     5: (07) r1 += 272                |
     6: (61) r0 = *(u32 *)(r2 +0)     |
     7: (35) if r0 >= 0x1 goto pc+6   | Inlined map in map lookup
     8: (54) (u32) r0 &= (u32) 0      | with index masking for
     9: (67) r0 <<= 3                 | map->unpriv_array.
    10: (0f) r0 += r1                 |
    11: (79) r0 = *(u64 *)(r0 +0)     |
    12: (15) if r0 == 0x0 goto pc+1   |
    13: (05) goto pc+1                |
    14: (b7) r0 = 0                   |
    15: (15) if r0 == 0x0 goto pc+11
    16: (62) *(u32 *)(r10 -4) = 0
    17: (bf) r2 = r10
    18: (07) r2 += -4
    19: (bf) r1 = r0
    20: (07) r1 += 272                |
    21: (61) r0 = *(u32 *)(r2 +0)     | Index masking missing (!)
    22: (35) if r0 >= 0x1 goto pc+3   | for inner map despite
    23: (67) r0 <<= 3                 | map->unpriv_array set.
    24: (0f) r0 += r1                 |
    25: (05) goto pc+1                |
    26: (b7) r0 = 0                   |
    27: (b7) r0 = 0
    28: (95) exit

After patch:

  # bpftool prog dump xla id 1
     0: (62) *(u32 *)(r10 -4) = 0
     1: (bf) r2 = r10
     2: (07) r2 += -4
     3: (18) r1 = map[id:2]
     5: (07) r1 += 272                |
     6: (61) r0 = *(u32 *)(r2 +0)     |
     7: (35) if r0 >= 0x1 goto pc+6   | Same inlined map in map lookup
     8: (54) (u32) r0 &= (u32) 0      | with index masking due to
     9: (67) r0 <<= 3                 | map->unpriv_array.
    10: (0f) r0 += r1                 |
    11: (79) r0 = *(u64 *)(r0 +0)     |
    12: (15) if r0 == 0x0 goto pc+1   |
    13: (05) goto pc+1                |
    14: (b7) r0 = 0                   |
    15: (15) if r0 == 0x0 goto pc+12
    16: (62) *(u32 *)(r10 -4) = 0
    17: (bf) r2 = r10
    18: (07) r2 += -4
    19: (bf) r1 = r0
    20: (07) r1 += 272                |
    21: (61) r0 = *(u32 *)(r2 +0)     |
    22: (35) if r0 >= 0x1 goto pc+4   | Now fixed inlined inner map
    23: (54) (u32) r0 &= (u32) 0      | lookup with proper index masking
    24: (67) r0 <<= 3                 | for map->unpriv_array.
    25: (0f) r0 += r1                 |
    26: (05) goto pc+1                |
    27: (b7) r0 = 0                   |
    28: (b7) r0 = 0
    29: (95) exit

Fixes: b2157399cc98 ("bpf: prevent out-of-bounds speculation")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Vallish Vaidyeshwara <vallish@amazon.com>
Signed-off-by: Balbir Singh <sblbir@amzn.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: fix sanitation of alu op with pointer / scalar type from different paths

commit d3bd7413e0ca40b60cf60d4003246d067cafdeda upstream.

While 979d63d50c0c ("bpf: prevent out of bounds speculation on pointer
arithmetic") took care of rejecting alu op on pointer when e.g. pointer
came from two different map values with different map properties such as
value size, Jann reported that a case was not covered yet when a given
alu op is used in both "ptr_reg += reg" and "numeric_reg += reg" from
different branches where we would incorrectly try to sanitize based
on the pointer's limit. Catch this corner case and reject the program
instead.

Fixes: 979d63d50c0c ("bpf: prevent out of bounds speculation on pointer arithmetic")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Vallish Vaidyeshwara <vallish@amazon.com>
Signed-off-by: Balbir Singh <sblbir@amzn.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: prevent out of bounds speculation on pointer arithmetic

commit 979d63d50c0c0f7bc537bf821e056cc9fe5abd38 upstream.

Jann reported that the original commit back in b2157399cc98
("bpf: prevent out-of-bounds speculation") was not sufficient
to stop CPU from speculating out of bounds memory access:
While b2157399cc98 only focussed on masking array map access
for unprivileged users for tail calls and data access such
that the user provided index gets sanitized from BPF program
and syscall side, there is still a more generic form affected
from BPF programs that applies to most maps that hold user
data in relation to dynamic map access when dealing with
unknown scalars or "slow" known scalars as access offset, for
example:

  - Load a map value pointer into R6
  - Load an index into R7
  - Do a slow computation (e.g. with a memory dependency) that
    loads a limit into R8 (e.g. load the limit from a map for
    high latency, then mask it to make the verifier happy)
  - Exit if R7 >= R8 (mispredicted branch)
  - Load R0 = R6[R7]
  - Load R0 = R6[R0]

For unknown scalars there are two options in the BPF verifier
where we could derive knowledge from in order to guarantee
safe access to the memory: i) While </>/<=/>= variants won't
allow to derive any lower or upper bounds from the unknown
scalar where it would be safe to add it to the map value
pointer, it is possible through ==/!= test however. ii) another
option is to transform the unknown scalar into a known scalar,
for example, through ALU ops combination such as R &= <imm>
followed by R |= <imm> or any similar combination where the
original information from the unknown scalar would be destroyed
entirely leaving R with a constant. The initial slow load still
precedes the latter ALU ops on that register, so the CPU
executes speculatively from that point. Once we have the known
scalar, any compare operation would work then. A third option
only involving registers with known scalars could be crafted
as described in [0] where a CPU port (e.g. Slow Int unit)
would be filled with many dependent computations such that
the subsequent condition depending on its outcome has to wait
for evaluation on its execution port and thereby executing
speculatively if the speculated code can be scheduled on a
different execution port, or any other form of mistraining
as described in [1], for example. Given this is not limited
to only unknown scalars, not only map but also stack access
is affected since both is accessible for unprivileged users
and could potentially be used for out of bounds access under
speculation.

In order to prevent any of these cases, the verifier is now
sanitizing pointer arithmetic on the offset such that any
out of bounds speculation would be masked in a way where the
pointer arithmetic result in the destination register will
stay unchanged, meaning offset masked into zero similar as
in array_index_nospec() case. With regards to implementation,
there are three options that were considered: i) new insn
for sanitation, ii) push/pop insn and sanitation as inlined
BPF, iii) reuse of ax register and sanitation as inlined BPF.

Option i) has the downside that we end up using from reserved
bits in the opcode space, but also that we would require
each JIT to emit masking as native arch opcodes meaning
mitigation would have slow adoption till everyone implements
it eventually which is counter-productive. Option ii) and iii)
have both in common that a temporary register is needed in
order to implement the sanitation as inlined BPF since we
are not allowed to modify the source register. While a push /
pop insn in ii) would be useful to have in any case, it
requires once again that every JIT needs to implement it
first. While possible, amount of changes needed would also
be unsuitable for a -stable patch. Therefore, the path which
has fewer changes, less BPF instructions for the mitigation
and does not require anything to be changed in the JITs is
option iii) which this work is pursuing. The ax register is
already mapped to a register in all JITs (modulo arm32 where
it's mapped to stack as various other BPF registers there)
and used in constant blinding for JITs-only so far. It can
be reused for verifier rewrites under certain constraints.
The interpreter's tmp "register" has therefore been remapped
into extending the register set with hidden ax register and
reusing that for a number of instructions that needed the
prior temporary variable internally (e.g. div, mod). This
allows for zero increase in stack space usage in the interpreter,
and enables (restricted) generic use in rewrites otherwise as
long as such a patchlet does not make use of these instructions.
The sanitation mask is dynamic and relative to the offset the
map value or stack pointer currently holds.

There are various cases that need to be taken under consideration
for the masking, e.g. such operation could look as follows:
ptr += val or val += ptr or ptr -= val. Thus, the value to be
sanitized could reside either in source or in destination
register, and the limit is different depending on whether
the ALU op is addition or subtraction and depending on the
current known and bounded offset. The limit is derived as
follows: limit := max_value_size - (smin_value + off). For
subtraction: limit := umax_value + off. This holds because
we do not allow any pointer arithmetic that would
temporarily go out of bounds or would have an unknown
value with mixed signed bounds where it is unclear at
verification time whether the actual runtime value would
be either negative or positive. For example, we have a
derived map pointer value with constant offset and bounded
one, so limit based on smin_value works because the verifier
requires that statically analyzed arithmetic on the pointer
must be in bounds, and thus it checks if resulting
smin_value + off and umax_value + off is still within map
value bounds at time of arithmetic in addition to time of
access. Similarly, for the case of stack access we derive
the limit as follows: MAX_BPF_STACK + off for subtraction
and -off for the case of addition where off := ptr_reg->off +
ptr_reg->var_off.value. Subtraction is a special case for
the masking which can be in form of ptr += -val, ptr -= -val,
or ptr -= val. In the first two cases where we know that
the value is negative, we need to temporarily negate the
value in order to do the sanitation on a positive value
where we later swap the ALU op, and restore original source
register if the value was in source.

The sanitation of pointer arithmetic alone is still not fully
sufficient as is, since a scenario like the following could
happen ...

  PTR += 0x1000 (e.g. K-based imm)
  PTR -= BIG_NUMBER_WITH_SLOW_COMPARISON
  PTR += 0x1000
  PTR -= BIG_NUMBER_WITH_SLOW_COMPARISON
  [...]

... which under speculation could end up as ...

  PTR += 0x1000
  PTR -= 0 [ truncated by mitigation ]
  PTR += 0x1000
  PTR -= 0 [ truncated by mitigation ]
  [...]

... and therefore still access out of bounds. To prevent such
case, the verifier is also analyzing safety for potential out
of bounds access under speculative execution. Meaning, it is
also simulating pointer access under truncation. We therefore
"branch off" and push the current verification state after the
ALU operation with known 0 to the verification stack for later
analysis. Given the current path analysis succeeded it is
likely that the one under speculation can be pruned. In any
case, it is also subject to existing complexity limits and
therefore anything beyond this point will be rejected. In
terms of pruning, it needs to be ensured that the verification
state from speculative execution simulation must never prune
a non-speculative execution path, therefore, we mark verifier
state accordingly at the time of push_stack(). If verifier
detects out of bounds access under speculative execution from
one of the possible paths that includes a truncation, it will
reject such program.

Given we mask every reg-based pointer arithmetic for
unprivileged programs, we've been looking into how it could
affect real-world programs in terms of size increase. As the
majority of programs are targeted for privileged-only use
case, we've unconditionally enabled masking (with its alu
restrictions on top of it) for privileged programs for the
sake of testing in order to check i) whether they get rejected
in its current form, and ii) by how much the number of
instructions and size will increase. We've tested this by
using Katran, Cilium and test_l4lb from the kernel selftests.
For Katran we've evaluated balancer_kern.o, Cilium bpf_lxc.o
and an older test object bpf_lxc_opt_-DUNKNOWN.o and l4lb
we've used test_l4lb.o as well as test_l4lb_noinline.o. We
found that none of the programs got rejected by the verifier
with this change, and that impact is rather minimal to none.
balancer_kern.o had 13,904 bytes (1,738 insns) xlated and
7,797 bytes JITed before and after the change. Most complex
program in bpf_lxc.o had 30,544 bytes (3,817 insns) xlated
and 18,538 bytes JITed before and after and none of the other
tail call programs in bpf_lxc.o had any changes either. For
the older bpf_lxc_opt_-DUNKNOWN.o object we found a small
increase from 20,616 bytes (2,576 insns) and 12,536 bytes JITed
before to 20,664 bytes (2,582 insns) and 12,558 bytes JITed
after the change. Other programs from that object file had
similar small increase. Both test_l4lb.o had no change and
remained at 6,544 bytes (817 insns) xlated and 3,401 bytes
JITed and for test_l4lb_noinline.o constant at 5,080 bytes
(634 insns) xlated and 3,313 bytes JITed. This can be explained
in that LLVM typically optimizes stack based pointer arithmetic
by using K-based operations and that use of dynamic map access
is not overly frequent. However, in future we may decide to
optimize the algorithm further under known guarantees from
branch and value speculation. Latter seems also unclear in
terms of prediction heuristics that today's CPUs apply as well
as whether there could be collisions in e.g. the predictor's
Value History/Pattern Table for triggering out of bounds access,
thus masking is performed unconditionally at this point but could
be subject to relaxation later on. We were generally also
brainstorming various other approaches for mitigation, but the
blocker was always lack of available registers at runtime and/or
overhead for runtime tracking of limits belonging to a specific
pointer. Thus, we found this to be minimally intrusive under
given constraints.

With that in place, a simple example with sanitized access on
unprivileged load at post-verification time looks as follows:

  # bpftool prog dump xlated id 282
  [...]
  28: (79) r1 = *(u64 *)(r7 +0)
  29: (79) r2 = *(u64 *)(r7 +8)
  30: (57) r1 &= 15
  31: (79) r3 = *(u64 *)(r0 +4608)
  32: (57) r3 &= 1
  33: (47) r3 |= 1
  34: (2d) if r2 > r3 goto pc+19
  35: (b4) (u32) r11 = (u32) 20479  |
  36: (1f) r11 -= r2                | Dynamic sanitation for pointer
  37: (4f) r11 |= r2                | arithmetic with registers
  38: (87) r11 = -r11               | containing bounded or known
  39: (c7) r11 s>>= 63              | scalars in order to prevent
  40: (5f) r11 &= r2                | out of bounds speculation.
  41: (0f) r4 += r11                |
  42: (71) r4 = *(u8 *)(r4 +0)
  43: (6f) r4 <<= r1
  [...]

For the case where the scalar sits in the destination register
as opposed to the source register, the following code is emitted
for the above example:

  [...]
  16: (b4) (u32) r11 = (u32) 20479
  17: (1f) r11 -= r2
  18: (4f) r11 |= r2
  19: (87) r11 = -r11
  20: (c7) r11 s>>= 63
  21: (5f) r2 &= r11
  22: (0f) r2 += r0
  23: (61) r0 = *(u32 *)(r2 +0)
  [...]

JIT blinding example with non-conflicting use of r10:

  [...]
   d5: je     0x0000000000000106    _
   d7: mov    0x0(%rax),%edi       |
   da: mov    $0xf153246,%r10d     | Index load from map value and
   e0: xor    $0xf153259,%r10      | (const blinded) mask with 0x1f.
   e7: and    %r10,%rdi            |_
   ea: mov    $0x2f,%r10d          |
   f0: sub    %rdi,%r10            | Sanitized addition. Both use r10
   f3: or     %rdi,%r10            | but do not interfere with each
   f6: neg    %r10                 | other. (Neither do these instructions
   f9: sar    $0x3f,%r10           | interfere with the use of ax as temp
   fd: and    %r10,%rdi            | in interpreter.)
  100: add    %rax,%rdi            |_
  103: mov    0x0(%rdi),%eax
[...]

Tested that it fixes Jann's reproducer, and also checked that test_verifier
and test_progs suite with interpreter, JIT and JIT with hardening enabled
on x86-64 and arm64 runs successfully.

  [0] Speculose: Analyzing the Security Implications of Speculative
      Execution in CPUs, Giorgi Maisuradze and Christian Rossow,
      https://arxiv.org/pdf/1801.04084.pdf

  [1] A Systematic Evaluation of Transient Execution Attacks and
      Defenses, Claudio Canella, Jo Van Bulck, Michael Schwarz,
      Moritz Lipp, Benjamin von Berg, Philipp Ortner, Frank Piessens,
      Dmitry Evtyushkin, Daniel Gruss,
      https://arxiv.org/pdf/1811.05441.pdf

Fixes: b2157399cc98 ("bpf: prevent out-of-bounds speculation")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Vallish Vaidyeshwara <vallish@amazon.com>
[some checkpatch cleanups and backported to 4.14 by sblbir]
Signed-off-by: Balbir Singh <sblbir@amzn.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: fix check_map_access smin_value test when pointer contains offset

commit b7137c4eab85c1cf3d46acdde90ce1163b28c873 upstream.

In check_map_access() we probe actual bounds through __check_map_access()
with offset of reg->smin_value + off for lower bound and offset of
reg->umax_value + off for the upper bound. However, even though the
reg->smin_value could have a negative value, the final result of the
sum with off could be positive when pointer arithmetic with known and
unknown scalars is combined. In this case we reject the program with
an error such as "R<x> min value is negative, either use unsigned index
or do a if (index >=0) check." even though the access itself would be
fine. Therefore extend the check to probe whether the actual resulting
reg->smin_value + off is less than zero.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
[backported to 4.14 sblbir]
Signed-off-by: Balbir Singh <sblbir@amzn.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: restrict unknown scalars of mixed signed bounds for unprivileged

commit 9d7eceede769f90b66cfa06ad5b357140d5141ed upstream.

For unknown scalars of mixed signed bounds, meaning their smin_value is
negative and their smax_value is positive, we need to reject arithmetic
with pointer to map value. For unprivileged the goal is to mask every
map pointer arithmetic and this cannot reliably be done when it is
unknown at verification time whether the scalar value is negative or
positive. Given this is a corner case, the likelihood of breaking should
be very small.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
[backported to 4.14 sblbir]
Signed-off-by: Balbir Singh <sblbir@amzn.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: restrict stack pointer arithmetic for unprivileged

commit e4298d25830a866cc0f427d4bccb858e76715859 upstream.

Restrict stack pointer arithmetic for unprivileged users in that
arithmetic itself must not go out of bounds as opposed to the actual
access later on. Therefore after each adjust_ptr_min_max_vals() with
a stack pointer as a destination we simulate a check_stack_access()
of 1 byte on the destination and once that fails the program is
rejected for unprivileged program loads. This is analog to map
value pointer arithmetic and needed for masking later on.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
[backported to 4.14 sblbir]
Signed-off-by: Balbir Singh <sblbir@amzn.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: restrict map value pointer arithmetic for unprivileged

commit 0d6303db7970e6f56ae700fa07e11eb510cda125 upstream.

Restrict map value pointer arithmetic for unprivileged users in that
arithmetic itself must not go out of bounds as opposed to the actual
access later on. Therefore after each adjust_ptr_min_max_vals() with a
map value pointer as a destination it will simulate a check_map_access()
of 1 byte on the destination and once that fails the program is rejected
for unprivileged program loads. We use this later on for masking any
pointer arithmetic with the remainder of the map value space. The
likelihood of breaking any existing real-world unprivileged eBPF
program is very small for this corner case.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: enable access to ax register also from verifier rewrite

commit 9b73bfdd08e73231d6a90ae6db4b46b3fbf56c30 upstream.

Right now we are using BPF ax register in JIT for constant blinding as
well as in interpreter as temporary variable. Verifier will not be able
to use it simply because its use will get overridden from the former in
bpf_jit_blind_insn(). However, it can be made to work in that blinding
will be skipped if there is prior use in either source or destination
register on the instruction. Taking constraints of ax into account, the
verifier is then open to use it in rewrites under some constraints. Note,
ax register already has mappings in every eBPF JIT.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
[backported to 4.14 sblbir]
Signed-off-by: Balbir Singh <sblbir@amzn.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: move tmp variable into ax register in interpreter

commit 144cd91c4c2bced6eb8a7e25e590f6618a11e854 upstream.

This change moves the on-stack 64 bit tmp variable in ___bpf_prog_run()
into the hidden ax register. The latter is currently only used in JITs
for constant blinding as a temporary scratch register, meaning the BPF
interpreter will never see the use of ax. Therefore it is safe to use
it for the cases where tmp has been used earlier. This is needed to later
on allow restricted hidden use of ax in both interpreter and JITs.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
[backported to 4.14 sblbir]
Signed-off-by: Balbir Singh <sblbir@amzn.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: move {prev_,}insn_idx into verifier env

commit c08435ec7f2bc8f4109401f696fd55159b4b40cb upstream.

Move prev_insn_idx and insn_idx from the do_check() function into
the verifier environment, so they can be read inside the various
helper functions for handling the instructions. It's easier to put
this into the environment rather than changing all call-sites only
to pass it along. insn_idx is useful in particular since this later
on allows to hold state in env->insn_aux_data[env->insn_idx].

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Vallish Vaidyeshwara <vallish@amazon.com>
[Backported to 4.14 by sblbir]
Signed-off-by: Balbir Singh <sblbir@amzn.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: fix stack state printing in verifier log

commit 12a3cc8424fe1237aaeb982dec4f0914ddd22f3e upstream.

fix incorrect stack state prints in print_verifier_state()

Fixes: 638f5b90d460 ("bpf: reduce verifier memory consumption")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Balbir Singh <sblbir@amzn.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: fix verifier NULL pointer dereference

commit 8c01c4f896aa3404af948880dcb29a2d51c833dc upstream.

do_check() can fail early without allocating env->cur_state under
memory pressure.  Syzkaller found the stack below on the linux-next
tree because of this.

  kasan: CONFIG_KASAN_INLINE enabled
  kasan: GPF could be caused by NULL-ptr deref or user memory access
  general protection fault: 0000 [#1] SMP KASAN
  Dumping ftrace buffer:
     (ftrace buffer empty)
  Modules linked in:
  CPU: 1 PID: 27062 Comm: syz-executor5 Not tainted 4.14.0-rc7+ #106
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
  task: ffff8801c2c74700 task.stack: ffff8801c3e28000
  RIP: 0010:free_verifier_state kernel/bpf/verifier.c:347 [inline]
  RIP: 0010:bpf_check+0xcf4/0x19c0 kernel/bpf/verifier.c:4533
  RSP: 0018:ffff8801c3e2f5c8 EFLAGS: 00010202
  RAX: dffffc0000000000 RBX: 00000000fffffff4 RCX: 0000000000000000
  RDX: 0000000000000070 RSI: ffffffff817d5aa9 RDI: 0000000000000380
  RBP: ffff8801c3e2f668 R08: 0000000000000000 R09: 1ffff100387c5d9f
  R10: 00000000218c4e80 R11: ffffffff85b34380 R12: ffff8801c4dc6a28
  R13: 0000000000000000 R14: ffff8801c4dc6a00 R15: ffff8801c4dc6a20
  FS:  00007f311079b700(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00000000004d4a24 CR3: 00000001cbcd0000 CR4: 00000000001406e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   bpf_prog_load+0xcbb/0x18e0 kernel/bpf/syscall.c:1166
   SYSC_bpf kernel/bpf/syscall.c:1690 [inline]
   SyS_bpf+0xae9/0x4620 kernel/bpf/syscall.c:1652
   entry_SYSCALL_64_fastpath+0x1f/0xbe
  RIP: 0033:0x452869
  RSP: 002b:00007f311079abe8 EFLAGS: 00000212 ORIG_RAX: 0000000000000141
  RAX: ffffffffffffffda RBX: 0000000000758020 RCX: 0000000000452869
  RDX: 0000000000000030 RSI: 0000000020168000 RDI: 0000000000000005
  RBP: 00007f311079aa20 R08: 0000000000000000 R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000212 R12: 00000000004b7550
  R13: 00007f311079ab58 R14: 00000000004b7560 R15: 0000000000000000
  Code: df 48 c1 ea 03 80 3c 02 00 0f 85 e6 0b 00 00 4d 8b 6e 20 48 b8 00 00 00 00 00 fc ff df 49 8d bd 80 03 00 00 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 b6 0b 00 00 49 8b bd 80 03 00 00 e8 d6 0c 26
  RIP: free_verifier_state kernel/bpf/verifier.c:347 [inline] RSP: ffff8801c3e2f5c8
  RIP: bpf_check+0xcf4/0x19c0 kernel/bpf/verifier.c:4533 RSP: ffff8801c3e2f5c8
  ---[ end trace c8d37f339dc64004 ]---

Fixes: 638f5b90d460 ("bpf: reduce verifier memory consumption")
Fixes: 1969db47f8d0 ("bpf: fix verifier memory leaks")
Signed-off-by: Craig Gallek <kraig@google.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Balbir Singh <sblbir@amzn.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: fix verifier memory leaks

commit 1969db47f8d0e800397abd4ee4e8d27d2b578587 upstream.

fix verifier memory leaks

Fixes: 638f5b90d460 ("bpf: reduce verifier memory consumption")
Signed-off-by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Balbir Singh <sblbir@amzn.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: reduce verifier memory consumption

commit 638f5b90d46016372a8e3e0a434f199cc5e12b8c upstream.

the verifier got progressively smarter over time and size of its internal
state grew as well. Time to reduce the memory consumption.

Before:
sizeof(struct bpf_verifier_state) = 6520
After:
sizeof(struct bpf_verifier_state) = 896

It's done by observing that majority of BPF programs use little to
no stack whereas verifier kept all of 512 stack slots ready always.
Instead dynamically reallocate struct verifier state when stack
access is detected.
Runtime difference before vs after is within a noise.
The number of processed instructions stays the same.

Cc: jakub.kicinski@netronome.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
[Backported to 4.14 by sblbir]
Signed-off-by: Balbir Singh <sblbir@amzn.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm: disable CRYPTO_TFM_REQ_MAY_SLEEP to fix a GFP_KERNEL recursion deadlock

[ Upstream commit 432061b3da64e488be3403124a72a9250bbe96d4 ]

There's a XFS on dm-crypt deadlock, recursing back to itself due to the
crypto subsystems use of GFP_KERNEL, reported here:
https://bugzilla.kernel.org/show_bug.cgi?id=200835

* dm-crypt calls crypt_convert in xts mode
* init_crypt from xts.c calls kmalloc(GFP_KERNEL)
* kmalloc(GFP_KERNEL) recurses into the XFS filesystem, the filesystem
tries to submit some bios and wait for them, causing a deadlock

Fix this by updating both the DM crypt and integrity targets to no
longer use the CRYPTO_TFM_REQ_MAY_SLEEP flag, which will change the
crypto allocations from GFP_KERNEL to GFP_ATOMIC, therefore they can't
recurse into a filesystem. A GFP_ATOMIC allocation can fail, but
init_crypt() in xts.c handles the allocation failure gracefully - it
will fall back to preallocated buffer if the allocation fails.

The crypto API maintainer says that the crypto API only needs to
allocate memory when dealing with unaligned buffers and therefore
turning CRYPTO_TFM_REQ_MAY_SLEEP off is safe (see this discussion:
https://www.redhat.com/archives/dm-devel/2018-August/msg00195.html )

Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

bpf: fix use after free in bpf_evict_inode

[ Upstream commit 1da6c4d9140cb7c13e87667dc4e1488d6c8fc10f ]

syzkaller was able to generate the following UAF in bpf:

  BUG: KASAN: use-after-free in lookup_last fs/namei.c:2269 [inline]
  BUG: KASAN: use-after-free in path_lookupat.isra.43+0x9f8/0xc00 fs/namei.c:2318
  Read of size 1 at addr ffff8801c4865c47 by task syz-executor2/9423

  CPU: 0 PID: 9423 Comm: syz-executor2 Not tainted 4.20.0-rc1-next-20181109+
  #110
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
  Google 01/01/2011
  Call Trace:
    __dump_stack lib/dump_stack.c:77 [inline]
    dump_stack+0x244/0x39d lib/dump_stack.c:113
    print_address_description.cold.7+0x9/0x1ff mm/kasan/report.c:256
    kasan_report_error mm/kasan/report.c:354 [inline]
    kasan_report.cold.8+0x242/0x309 mm/kasan/report.c:412
    __asan_report_load1_noabort+0x14/0x20 mm/kasan/report.c:430
    lookup_last fs/namei.c:2269 [inline]
    path_lookupat.isra.43+0x9f8/0xc00 fs/namei.c:2318
    filename_lookup+0x26a/0x520 fs/namei.c:2348
    user_path_at_empty+0x40/0x50 fs/namei.c:2608
    user_path include/linux/namei.h:62 [inline]
    do_mount+0x180/0x1ff0 fs/namespace.c:2980
    ksys_mount+0x12d/0x140 fs/namespace.c:3258
    __do_sys_mount fs/namespace.c:3272 [inline]
    __se_sys_mount fs/namespace.c:3269 [inline]
    __x64_sys_mount+0xbe/0x150 fs/namespace.c:3269
    do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
    entry_SYSCALL_64_after_hwframe+0x49/0xbe
  RIP: 0033:0x457569
  Code: fd b3 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7
  48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff
  ff 0f 83 cb b3 fb ff c3 66 2e 0f 1f 84 00 00 00 00
  RSP: 002b:00007fde6ed96c78 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
  RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 0000000000457569
  RDX: 0000000020000040 RSI: 0000000020000000 RDI: 0000000000000000
  RBP: 000000000072bf00 R08: 0000000020000340 R09: 0000000000000000
  R10: 0000000000200000 R11: 0000000000000246 R12: 00007fde6ed976d4
  R13: 00000000004c2c24 R14: 00000000004d4990 R15: 00000000ffffffff

  Allocated by task 9424:
    save_stack+0x43/0xd0 mm/kasan/kasan.c:448
    set_track mm/kasan/kasan.c:460 [inline]
    kasan_kmalloc+0xc7/0xe0 mm/kasan/kasan.c:553
    __do_kmalloc mm/slab.c:3722 [inline]
    __kmalloc_track_caller+0x157/0x760 mm/slab.c:3737
    kstrdup+0x39/0x70 mm/util.c:49
    bpf_symlink+0x26/0x140 kernel/bpf/inode.c:356
    vfs_symlink+0x37a/0x5d0 fs/namei.c:4127
    do_symlinkat+0x242/0x2d0 fs/namei.c:4154
    __do_sys_symlink fs/namei.c:4173 [inline]
    __se_sys_symlink fs/namei.c:4171 [inline]
    __x64_sys_symlink+0x59/0x80 fs/namei.c:4171
    do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
    entry_SYSCALL_64_after_hwframe+0x49/0xbe

  Freed by task 9425:
    save_stack+0x43/0xd0 mm/kasan/kasan.c:448
    set_track mm/kasan/kasan.c:460 [inline]
    __kasan_slab_free+0x102/0x150 mm/kasan/kasan.c:521
    kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528
    __cache_free mm/slab.c:3498 [inline]
    kfree+0xcf/0x230 mm/slab.c:3817
    bpf_evict_inode+0x11f/0x150 kernel/bpf/inode.c:565
    evict+0x4b9/0x980 fs/inode.c:558
    iput_final fs/inode.c:1550 [inline]
    iput+0x674/0xa90 fs/inode.c:1576
    do_unlinkat+0x733/0xa30 fs/namei.c:4069
    __do_sys_unlink fs/namei.c:4110 [inline]
    __se_sys_unlink fs/namei.c:4108 [inline]
    __x64_sys_unlink+0x42/0x50 fs/namei.c:4108
    do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
    entry_SYSCALL_64_after_hwframe+0x49/0xbe

In this scenario path lookup under RCU is racing with the final
unlink in case of symlinks. As Linus puts it in his analysis:

  [...] We actually RCU-delay the inode freeing itself, but
  when we do the final iput(), the "evict()" function is called
  synchronously. Now, the simple fix would seem to just RCU-delay
  the kfree() of the symlink data in bpf_evict_inode(). Maybe
  that's the right thing to do. [...]

Al suggested to piggy-back on the ->destroy_inode() callback in
order to implement RCU deferral there which can then kfree() the
inode->i_link eventually right before putting inode back into
inode cache. By reusing free_inode_nonrcu() from there we can
avoid the need for our own inode cache and just reuse generic
one as we currently do.

And in-fact on top of all this we should just get rid of the
bpf_evict_inode() entirely. This means truncate_inode_pages_final()
and clear_inode() will then simply be called by the fs core via
evict(). Dropping the reference should really only be done when
inode is unhashed and nothing reachable anymore, so it's better
also moved into the final ->destroy_inode() callback.

Fixes: 0f98621bef5d ("bpf, inode: add support for symlinks and fix mtime/ctime")
Reported-by: syzbot+fb731ca573367b7f6564@syzkaller.appspotmail.com
Reported-by: syzbot+a13e5ead792d6df37818@syzkaller.appspotmail.com
Reported-by: syzbot+7a8ba368b47fdefca61e@syzkaller.appspotmail.com
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Analyzed-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/lkml/0000000000006946d2057bbd0eef@google.com/T/
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>

include/linux/swap.h: use offsetof() instead of custom __swapoffset macro

[ Upstream commit a4046c06be50a4f01d435aa7fe57514818e6cc82 ]

Use offsetof() to calculate offset of a field to take advantage of
compiler built-in version when possible, and avoid UBSAN warning when
compiling with Clang:

  UBSAN: Undefined behaviour in mm/swapfile.c:3010:38
  member access within null pointer of type 'union swap_header'
  CPU: 6 PID: 1833 Comm: swapon Tainted: G S                4.19.23 #43
  Call trace:
   dump_backtrace+0x0/0x194
   show_stack+0x20/0x2c
   __dump_stack+0x20/0x28
   dump_stack+0x70/0x94
   ubsan_epilogue+0x14/0x44
   ubsan_type_mismatch_common+0xf4/0xfc
   __ubsan_handle_type_mismatch_v1+0x34/0x54
   __se_sys_swapon+0x654/0x1084
   __arm64_sys_swapon+0x1c/0x24
   el0_svc_common+0xa8/0x150
   el0_svc_compat_handler+0x2c/0x38
   el0_svc_compat+0x8/0x18

Link: http://lkml.kernel.org/r/20190312081902.223764-1-pihsun@chromium.org
Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

lib/div64.c: off by one in shift

[ Upstream commit cdc94a37493135e355dfc0b0e086d84e3eadb50d ]

fls counts bits starting from 1 to 32 (returns 0 for zero argument). If
we add 1 we shift right one bit more and loose precision from divisor,
what cause function incorect results with some numbers.

Corrected code was tested in user-space, see bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=202391

Link: http://lkml.kernel.org/r/1548686944-11891-1-git-send-email-sgruszka@redhat.com
Fixes: 658716d19f8f ("div64_u64(): improve precision on 32bit platforms")
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Reported-by: Siarhei Volkau <lis8215@gmail.com>
Tested-by: Siarhei Volkau <lis8215@gmail.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

appletalk: Fix use-after-free in atalk_proc_exit

[ Upstream commit 6377f787aeb945cae7abbb6474798de129e1f3ac ]

KASAN report this:

BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71
Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806

CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xfa/0x1ce lib/dump_stack.c:113
print_address_description+0x65/0x270 mm/kasan/report.c:187
kasan_report+0x149/0x18d mm/kasan/report.c:317
pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71
remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667
atalk_proc_exit+0x18/0x820 [appletalk]
atalk_exit+0xf/0x5a [appletalk]
__do_sys_delete_module kernel/module.c:1018 [inline]
__se_sys_delete_module kernel/module.c:961 [inline]
__x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961
do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462e99
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0
RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0
RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc
R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff

Allocated by task 2806:
set_track mm/kasan/common.c:85 [inline]
__kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496
slab_post_alloc_hook mm/slab.h:444 [inline]
slab_alloc_node mm/slub.c:2739 [inline]
slab_alloc mm/slub.c:2747 [inline]
kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752
kmem_cache_zalloc include/linux/slab.h:730 [inline]
__proc_create+0x30f/0xa20 fs/proc/generic.c:408
proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469
0xffffffffc10c01bb
0xffffffffc10c0166
do_one_initcall+0xfa/0x5ca init/main.c:887
do_init_module+0x204/0x5f6 kernel/module.c:3460
load_module+0x66b2/0x8570 kernel/module.c:3808
__do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 2806:
set_track mm/kasan/common.c:85 [inline]
__kasan_slab_free+0x130/0x180 mm/kasan/common.c:458
slab_free_hook mm/slub.c:1409 [inline]
slab_free_freelist_hook mm/slub.c:1436 [inline]
slab_free mm/slub.c:2986 [inline]
kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002
pde_put+0x6e/0x80 fs/proc/generic.c:647
remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684
0xffffffffc10c031c
0xffffffffc10c0166
do_one_initcall+0xfa/0x5ca init/main.c:887
do_init_module+0x204/0x5f6 kernel/module.c:3460
load_module+0x66b2/0x8570 kernel/module.c:3808
__do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff8881f41fe500
which belongs to the cache proc_dir_entry of size 256
The buggy address is located 176 bytes inside of
256-byte region [ffff8881f41fe500, ffff8881f41fe600)
The buggy address belongs to the page:
page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0
flags: 0x2fffc0000000200(slab)
raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00
raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

It should check the return value of atalk_proc_init fails,
otherwise atalk_exit will trgger use-after-free in pde_subdir_find
while unload the module.This patch fix error cleanup path of atalk_init

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdkfd: use init_mqd function to allocate object for hid_mqd (CI)

[ Upstream commit cac734c2dbd2514f14c8c6a17caba1990d83bf1d ]

if use the legacy method to allocate object, when mqd_hiq need to run
uninit code, it will be cause WARNING call trace.

eg: (s3 suspend test)
[   34.918944] Call Trace:
[   34.918948]  [<ffffffff92961dc1>] dump_stack+0x19/0x1b
[   34.918950]  [<ffffffff92297648>] __warn+0xd8/0x100
[   34.918951]  [<ffffffff9229778d>] warn_slowpath_null+0x1d/0x20
[   34.918991]  [<ffffffffc03ce1fe>] uninit_mqd_hiq_sdma+0x4e/0x50 [amdgpu]
[   34.919028]  [<ffffffffc03d0ef7>] uninitialize+0x37/0xe0 [amdgpu]
[   34.919064]  [<ffffffffc03d15a6>] kernel_queue_uninit+0x16/0x30 [amdgpu]
[   34.919086]  [<ffffffffc03d26c2>] pm_uninit+0x12/0x20 [amdgpu]
[   34.919107]  [<ffffffffc03d4915>] stop_nocpsch+0x15/0x20 [amdgpu]
[   34.919129]  [<ffffffffc03c1dce>] kgd2kfd_suspend.part.4+0x2e/0x50 [amdgpu]
[   34.919150]  [<ffffffffc03c2667>] kgd2kfd_suspend+0x17/0x20 [amdgpu]
[   34.919171]  [<ffffffffc03c103a>] amdgpu_amdkfd_suspend+0x1a/0x20 [amdgpu]
[   34.919187]  [<ffffffffc02ec428>] amdgpu_device_suspend+0x88/0x3a0 [amdgpu]
[   34.919189]  [<ffffffff922e22cf>] ? enqueue_entity+0x2ef/0xbe0
[   34.919205]  [<ffffffffc02e8220>] amdgpu_pmops_suspend+0x20/0x30 [amdgpu]
[   34.919207]  [<ffffffff925c56ff>] pci_pm_suspend+0x6f/0x150
[   34.919208]  [<ffffffff925c5690>] ? pci_pm_freeze+0xf0/0xf0
[   34.919210]  [<ffffffff926b45c6>] dpm_run_callback+0x46/0x90
[   34.919212]  [<ffffffff926b49db>] __device_suspend+0xfb/0x2a0
[   34.919213]  [<ffffffff926b4b9f>] async_suspend+0x1f/0xa0
[   34.919214]  [<ffffffff922c918f>] async_run_entry_fn+0x3f/0x130
[   34.919216]  [<ffffffff922b9d4f>] process_one_work+0x17f/0x440
[   34.919217]  [<ffffffff922bade6>] worker_thread+0x126/0x3c0
[   34.919218]  [<ffffffff922bacc0>] ? manage_workers.isra.25+0x2a0/0x2a0
[   34.919220]  [<ffffffff922c1c31>] kthread+0xd1/0xe0
[   34.919221]  [<ffffffff922c1b60>] ? insert_kthread_work+0x40/0x40
[   34.919222]  [<ffffffff92974c1d>] ret_from_fork_nospec_begin+0x7/0x21
[   34.919224]  [<ffffffff922c1b60>] ? insert_kthread_work+0x40/0x40
[   34.919224] ---[ end trace 38cd9f65c963adad ]---

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: 8839/1: kprobe: make patch_lock a raw_spinlock_t

[ Upstream commit 143c2a89e0e5fda6c6fd08d7bc1126438c19ae90 ]

When running kprobe on -rt kernel, the below bug is caught:

|BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:931
|in_atomic(): 1, irqs_disabled(): 128, pid: 14, name: migration/0
|Preemption disabled at:[<802f2b98>] cpu_stopper_thread+0xc0/0x140
|CPU: 0 PID: 14 Comm: migration/0 Tainted: G O 4.8.3-rt2 #1
|Hardware name: Freescale LS1021A
|[<8025a43c>] (___might_sleep)
|[<80b5b324>] (rt_spin_lock)
|[<80b5c31c>] (__patch_text_real)
|[<80b5c3ac>] (patch_text_stop_machine)
|[<802f2920>] (multi_cpu_stop)

Since patch_text_stop_machine() is called in stop_machine() which
disables IRQ, sleepable lock should be not used in this atomic context,
so replace patch_lock to raw lock.

Signed-off-by: Yang Shi <yang.shi@linaro.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/nouveau/volt/gf117: fix speedo readout register

[ Upstream commit fc782242749fa4235592854fafe1a1297583c1fb ]

GF117 appears to use the same register as GK104 (but still with the
general Fermi readout mechanism).

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108980
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

coresight: cpu-debug: Support for CA73 CPUs

[ Upstream commit a0f890aba2be33377f4eb24e13633c4a76a68f38 ]

This patch is to add the AMBA device ID for CA73 CPU, so that CPU debug
module can be initialized successfully when a SoC contain CA73 CPUs.

This patch has been verified on 96boards Hikey960.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "ACPI / EC: Remove old CLEAR_ON_RESUME quirk"

[ Upstream commit b6a3e1475b0220378ad32bdf4d8692f058b1fc03 ]

On some Samsung hardware, it is necessary to clear events accumulated by
the EC during sleep. These ECs stop reporting GPEs until they are manually
polled, if too many events are accumulated.
Thus the CLEAR_ON_RESUME quirk is introduced to send EC query commands
unconditionally after resume to clear all the EC query events on those
platforms.

Later, commit 4c237371f290 ("ACPI / EC: Remove old CLEAR_ON_RESUME quirk")
removes the CLEAR_ON_RESUME quirk because we thought the new EC IRQ
polling logic should handle this case.

Now it has been proved that the EC IRQ Polling logic does not fix the
issue actually because we got regression report on these Samsung
platforms after removing the quirk.

Thus revert commit 4c237371f290 ("ACPI / EC: Remove old CLEAR_ON_RESUME
quirk") to introduce back the Samsung quirk in this patch.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=44161
Tested-by: Ortwin Glück <odi@odi.ch>
Tested-by: Francisco Cribari <cribari@gmail.com>
Tested-by: Balazs Varga <balazs4web@gmail.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: axis - fix for recursive locking from bottom half

[ Upstream commit c34a83820f59bb275e5f2d55cd5ea99c64f6ef23 ]

Clients may submit a new requests from the completion callback
context. The driver was not prepared to receive a request in this
state because it already held the request queue lock and a recursive
lock error is triggered.

Now all completions are queued up until we are ready to drop the queue
lock and then delivered.

The fault was triggered by TCP over an IPsec connection in the LTP
test suite:
  LTP: starting tcp4_ipsec02 (tcp_ipsec.sh -p ah -m transport -s "100 1000 65535")
  BUG: spinlock recursion on CPU#1, genload/943
   lock: 0xbf3c3094, .magic: dead4ead, .owner: genload/943, .owner_cpu: 1
  CPU: 1 PID: 943 Comm: genload Tainted: G           O    4.9.62-axis5-devel #6
  Hardware name: Axis ARTPEC-6 Platform
   (unwind_backtrace) from [<8010d134>] (show_stack+0x18/0x1c)
   (show_stack) from [<803a289c>] (dump_stack+0x84/0x98)
   (dump_stack) from [<8016e164>] (do_raw_spin_lock+0x124/0x128)
   (do_raw_spin_lock) from [<804de1a4>] (artpec6_crypto_submit+0x2c/0xa0)
   (artpec6_crypto_submit) from [<804def38>] (artpec6_crypto_prepare_submit_hash+0xd0/0x54c)
   (artpec6_crypto_prepare_submit_hash) from [<7f3165f0>] (ah_output+0x2a4/0x3dc [ah4])
   (ah_output [ah4]) from [<805df9bc>] (xfrm_output_resume+0x178/0x4a4)
   (xfrm_output_resume) from [<805d283c>] (xfrm4_output+0xac/0xbc)
   (xfrm4_output) from [<80587928>] (ip_queue_xmit+0x140/0x3b4)
   (ip_queue_xmit) from [<805a13b4>] (tcp_transmit_skb+0x4c4/0x95c)
   (tcp_transmit_skb) from [<8059f218>] (tcp_rcv_state_process+0xdf4/0xdfc)
   (tcp_rcv_state_process) from [<805a7530>] (tcp_v4_do_rcv+0x64/0x1ac)
   (tcp_v4_do_rcv) from [<805a9724>] (tcp_v4_rcv+0xa34/0xb74)
   (tcp_v4_rcv) from [<80581d34>] (ip_local_deliver_finish+0x78/0x2b0)
   (ip_local_deliver_finish) from [<8058259c>] (ip_local_deliver+0xe4/0x104)
   (ip_local_deliver) from [<805d23ec>] (xfrm4_transport_finish+0xf4/0x144)
   (xfrm4_transport_finish) from [<805df564>] (xfrm_input+0x4f4/0x74c)
   (xfrm_input) from [<804de420>] (artpec6_crypto_task+0x208/0x38c)
   (artpec6_crypto_task) from [<801271b0>] (tasklet_action+0x60/0xec)
   (tasklet_action) from [<801266d4>] (__do_softirq+0xcc/0x3a4)
   (__do_softirq) from [<80126d20>] (irq_exit+0xf4/0x15c)
   (irq_exit) from [<801741e8>] (__handle_domain_irq+0x68/0xbc)
   (__handle_domain_irq) from [<801014f0>] (gic_handle_irq+0x50/0x94)
   (gic_handle_irq) from [<80657370>] (__irq_usr+0x50/0x80)

Signed-off-by: Lars Persson <larper@axis.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/panel: panel-innolux: set display off in innolux_panel_unprepare

[ Upstream commit 46f3ceaffa81e846677bca8668e0ad40e643cffd ]

Move mipi_dsi_dcs_set_display_off() from innolux_panel_disable()
to innolux_panel_unprepare(), so they are consistent with
innolux_panel_enable() and innolux_panel_prepare().

This also fixes some mode check and irq timeout issue in MTK dsi code.

Since some dsi code (e.g. mtk_dsi) have following call trace:
1. drm_panel_disable(), which calls innolux_panel_disable()
2. switch to cmd mode
3. drm_panel_unprepare(), which calls innolux_panel_unprepare()

However, mtk_dsi needs to be in cmd mode to be able to send commands
(e.g. mipi_dsi_dcs_set_display_off() and mipi_dsi_dcs_enter_sleep_mode()),
so we need these functions to be called after the switch to cmd mode happens,
i.e. in innolux_panel_unprepare.

Signed-off-by: Hsin-Yi, Wang <hsinyi@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190109065922.231753-1-hsinyi@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

lkdtm: Add tests for NULL pointer dereference

[ Upstream commit 59a12205d3c32aee4c13ca36889fdf7cfed31126 ]

Introduce lkdtm tests for NULL pointer dereference: check access or exec
at NULL address, since these errors tend to be reported differently from
the general fault error text. For example from x86:

    pr_alert("BUG: unable to handle kernel %s at %px\n",
        address < PAGE_SIZE ? "NULL pointer dereference" : "paging request",
        (void *)address);

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

lkdtm: Print real addresses

[ Upstream commit 4c411157a42f122051ae3469bee0b5cabe89e139 ]

Today, when doing a lkdtm test before the readiness of the
random generator, (ptrval) is printed instead of the address
at which it perform the fault:

[ 1597.337030] lkdtm: Performing direct entry EXEC_USERSPACE
[ 1597.337142] lkdtm: attempting ok execution at (ptrval)
[ 1597.337398] lkdtm: attempting bad execution at (ptrval)
[ 1597.337460] kernel tried to execute user page (77858000) -exploit attempt? (uid: 0)
[ 1597.344769] Unable to handle kernel paging request for instruction fetch
[ 1597.351392] Faulting instruction address: 0x77858000
[ 1597.356312] Oops: Kernel access of bad area, sig: 11 [#1]

If the lkdtm test is done later on, it prints an hashed address.

In both cases this is pointless. The purpose of the test is to
ensure the kernel generates an Oops at the expected address,
so real addresses needs to be printed. This patch fixes that.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc/tegra: pmc: Drop locking from tegra_powergate_is_powered()

[ Upstream commit b6e1fd17a38bd1d97c11d69fd3207b3ef9bfa4b3 ]

This fixes splats like the one below if CONFIG_DEBUG_ATOMIC_SLEEP=y
and machine (Tegra30) booted with SMP=n or all secondary CPU's are put
offline. Locking isn't needed because it protects atomic operation.

BUG: sleeping function called from invalid context at kernel/locking/mutex.c:254
in_atomic(): 1, irqs_disabled(): 128, pid: 0, name: swapper/0
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G C 4.18.0-next-20180821-00180-gc3ebb6544e44-dirty #823
Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
[<c01134f4>] (unwind_backtrace) from [<c010db2c>] (show_stack+0x20/0x24)
[<c010db2c>] (show_stack) from [<c0bd0f3c>] (dump_stack+0x94/0xa8)
[<c0bd0f3c>] (dump_stack) from [<c0151df8>] (___might_sleep+0x13c/0x174)
[<c0151df8>] (___might_sleep) from [<c0151ea0>] (__might_sleep+0x70/0xa8)
[<c0151ea0>] (__might_sleep) from [<c0bec2b8>] (mutex_lock+0x2c/0x70)
[<c0bec2b8>] (mutex_lock) from [<c0589844>] (tegra_powergate_is_powered+0x44/0xa8)
[<c0589844>] (tegra_powergate_is_powered) from [<c0581a60>] (tegra30_cpu_rail_off_ready+0x30/0x74)
[<c0581a60>] (tegra30_cpu_rail_off_ready) from [<c0122244>] (tegra30_idle_lp2+0xa0/0x108)
[<c0122244>] (tegra30_idle_lp2) from [<c0853438>] (cpuidle_enter_state+0x140/0x540)
[<c0853438>] (cpuidle_enter_state) from [<c08538a4>] (cpuidle_enter+0x40/0x4c)
[<c08538a4>] (cpuidle_enter) from [<c01595e0>] (call_cpuidle+0x30/0x48)
[<c01595e0>] (call_cpuidle) from [<c01599f8>] (do_idle+0x238/0x28c)
[<c01599f8>] (do_idle) from [<c0159d28>] (cpu_startup_entry+0x28/0x2c)
[<c0159d28>] (cpu_startup_entry) from [<c0be76c8>] (rest_init+0xd8/0xdc)
[<c0be76c8>] (rest_init) from [<c1200f50>] (start_kernel+0x41c/0x430)

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/dmar: Fix buffer overflow during PCI bus notification

[ Upstream commit cffaaf0c816238c45cd2d06913476c83eb50f682 ]

Commit 57384592c433 ("iommu/vt-d: Store bus information in RMRR PCI
device path") changed the type of the path data, however, the change in
path type was not reflected in size calculations.  Update to use the
correct type and prevent a buffer overflow.

This bug manifests in systems with deep PCI hierarchies, and can lead to
an overflow of the static allocated buffer (dmar_pci_notify_info_buf),
or can lead to overflow of slab-allocated data.

   BUG: KASAN: global-out-of-bounds in dmar_alloc_pci_notify_info+0x1d5/0x2e0
   Write of size 1 at addr ffffffff90445d80 by task swapper/0/1
   CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W       4.14.87-rt49-02406-gd0a0e96 #1
   Call Trace:
    ? dump_stack+0x46/0x59
    ? print_address_description+0x1df/0x290
    ? dmar_alloc_pci_notify_info+0x1d5/0x2e0
    ? kasan_report+0x256/0x340
    ? dmar_alloc_pci_notify_info+0x1d5/0x2e0
    ? e820__memblock_setup+0xb0/0xb0
    ? dmar_dev_scope_init+0x424/0x48f
    ? __down_write_common+0x1ec/0x230
    ? dmar_dev_scope_init+0x48f/0x48f
    ? dmar_free_unused_resources+0x109/0x109
    ? cpumask_next+0x16/0x20
    ? __kmem_cache_create+0x392/0x430
    ? kmem_cache_create+0x135/0x2f0
    ? e820__memblock_setup+0xb0/0xb0
    ? intel_iommu_init+0x170/0x1848
    ? _raw_spin_unlock_irqrestore+0x32/0x60
    ? migrate_enable+0x27a/0x5b0
    ? sched_setattr+0x20/0x20
    ? migrate_disable+0x1fc/0x380
    ? task_rq_lock+0x170/0x170
    ? try_to_run_init_process+0x40/0x40
    ? locks_remove_file+0x85/0x2f0
    ? dev_prepare_static_identity_mapping+0x78/0x78
    ? rt_spin_unlock+0x39/0x50
    ? lockref_put_or_lock+0x2a/0x40
    ? dput+0x128/0x2f0
    ? __rcu_read_unlock+0x66/0x80
    ? __fput+0x250/0x300
    ? __rcu_read_lock+0x1b/0x30
    ? mntput_no_expire+0x38/0x290
    ? e820__memblock_setup+0xb0/0xb0
    ? pci_iommu_init+0x25/0x63
    ? pci_iommu_init+0x25/0x63
    ? do_one_initcall+0x7e/0x1c0
    ? initcall_blacklisted+0x120/0x120
    ? kernel_init_freeable+0x27b/0x307
    ? rest_init+0xd0/0xd0
    ? kernel_init+0xf/0x120
    ? rest_init+0xd0/0xd0
    ? ret_from_fork+0x1f/0x40
   The buggy address belongs to the variable:
    dmar_pci_notify_info_buf+0x40/0x60

Fixes: 57384592c433 ("iommu/vt-d: Store bus information in RMRR PCI device path")
Signed-off-by: Julia Cartwright <julia@ni.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: sha512/arm - fix crash bug in Thumb2 build

[ Upstream commit c64316502008064c158fa40cc250665e461b0f2a ]

The SHA512 code we adopted from the OpenSSL project uses a rather
peculiar way to take the address of the round constant table: it
takes the address of the sha256_block_data_order() routine, and
substracts a constant known quantity to arrive at the base of the
table, which is emitted by the same assembler code right before
the routine's entry point.

However, recent versions of binutils have helpfully changed the
behavior of references emitted via an ADR instruction when running
in Thumb2 mode: it now takes the Thumb execution mode bit into
account, which is bit 0 af the address. This means the produced
table address also has bit 0 set, and so we end up with an address
value pointing 1 byte past the start of the table, which results
in crashes such as

  Unable to handle kernel paging request at virtual address bf825000
  pgd = 42f44b11
  [bf825000] *pgd=80000040206003, *pmd=5f1bd003, *pte=00000000
  Internal error: Oops: 207 [#1] PREEMPT SMP THUMB2
  Modules linked in: sha256_arm(+) sha1_arm_ce sha1_arm ...
  CPU: 7 PID: 396 Comm: cryptomgr_test Not tainted 5.0.0-rc6+ #144
  Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
  PC is at sha256_block_data_order+0xaaa/0xb30 [sha256_arm]
  LR is at __this_module+0x17fd/0xffffe800 [sha256_arm]
  pc : [<bf820bca>]    lr : [<bf824ffd>]    psr: 800b0033
  sp : ebc8bbe8  ip : faaabe1c  fp : 2fdd3433
  r10: 4c5f1692  r9 : e43037df  r8 : b04b0a5a
  r7 : c369d722  r6 : 39c3693e  r5 : 7a013189  r4 : 1580d26b
  r3 : 8762a9b0  r2 : eea9c2cd  r1 : 3e9ab536  r0 : 1dea4ae7
  Flags: Nzcv  IRQs on  FIQs on  Mode SVC_32  ISA Thumb  Segment user
  Control: 70c5383d  Table: 6b8467c0  DAC: dbadc0de
  Process cryptomgr_test (pid: 396, stack limit = 0x69e1fe23)
  Stack: (0xebc8bbe8 to 0xebc8c000)
  ...
  unwind: Unknown symbol address bf820bca
  unwind: Index not found bf820bca
  Code: 441a ea80 40f9 440a (f85e) 3b04
  ---[ end trace e560cce92700ef8a ]---

Given that this affects older kernels as well, in case they are built
with a recent toolchain, apply a minimal backportable fix, which is
to emit another non-code label at the start of the routine, and
reference that instead. (This is similar to the current upstream state
of this file in OpenSSL)

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: sha256/arm - fix crash bug in Thumb2 build

[ Upstream commit 69216a545cf81b2b32d01948f7039315abaf75a0 ]

The SHA256 code we adopted from the OpenSSL project uses a rather
peculiar way to take the address of the round constant table: it
takes the address of the sha256_block_data_order() routine, and
substracts a constant known quantity to arrive at the base of the
table, which is emitted by the same assembler code right before
the routine's entry point.

However, recent versions of binutils have helpfully changed the
behavior of references emitted via an ADR instruction when running
in Thumb2 mode: it now takes the Thumb execution mode bit into
account, which is bit 0 af the address. This means the produced
table address also has bit 0 set, and so we end up with an address
value pointing 1 byte past the start of the table, which results
in crashes such as

  Unable to handle kernel paging request at virtual address bf825000
  pgd = 42f44b11
  [bf825000] *pgd=80000040206003, *pmd=5f1bd003, *pte=00000000
  Internal error: Oops: 207 [#1] PREEMPT SMP THUMB2
  Modules linked in: sha256_arm(+) sha1_arm_ce sha1_arm ...
  CPU: 7 PID: 396 Comm: cryptomgr_test Not tainted 5.0.0-rc6+ #144
  Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
  PC is at sha256_block_data_order+0xaaa/0xb30 [sha256_arm]
  LR is at __this_module+0x17fd/0xffffe800 [sha256_arm]
  pc : [<bf820bca>]    lr : [<bf824ffd>]    psr: 800b0033
  sp : ebc8bbe8  ip : faaabe1c  fp : 2fdd3433
  r10: 4c5f1692  r9 : e43037df  r8 : b04b0a5a
  r7 : c369d722  r6 : 39c3693e  r5 : 7a013189  r4 : 1580d26b
  r3 : 8762a9b0  r2 : eea9c2cd  r1 : 3e9ab536  r0 : 1dea4ae7
  Flags: Nzcv  IRQs on  FIQs on  Mode SVC_32  ISA Thumb  Segment user
  Control: 70c5383d  Table: 6b8467c0  DAC: dbadc0de
  Process cryptomgr_test (pid: 396, stack limit = 0x69e1fe23)
  Stack: (0xebc8bbe8 to 0xebc8c000)
  ...
  unwind: Unknown symbol address bf820bca
  unwind: Index not found bf820bca
  Code: 441a ea80 40f9 440a (f85e) 3b04
  ---[ end trace e560cce92700ef8a ]---

Given that this affects older kernels as well, in case they are built
with a recent toolchain, apply a minimal backportable fix, which is
to emit another non-code label at the start of the routine, and
reference that instead. (This is similar to the current upstream state
of this file in OpenSSL)

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kernel: hung_task.c: disable on suspend

[ Upstream commit a1c6ca3c6de763459a6e93b644ec6518c890ba1c ]

It is possible to observe hung_task complaints when system goes to
suspend-to-idle state:

# echo freeze > /sys/power/state

PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.001 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
sd 0:0:0:0: [sda] Synchronizing SCSI cache
INFO: task bash:1569 blocked for more than 120 seconds.
       Not tainted 4.19.0-rc3_+ #687
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
bash            D    0  1569    604 0x00000000
Call Trace:
  ? __schedule+0x1fe/0x7e0
  schedule+0x28/0x80
  suspend_devices_and_enter+0x4ac/0x750
  pm_suspend+0x2c0/0x310

Register a PM notifier to disable the detector on suspend and re-enable
back on wakeup.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: fallback to older infolevels on findfirst queryinfo retry

[ Upstream commit 3b7960caceafdfc2cdfe2850487f8d091eb41144 ]

In cases where queryinfo fails, we have cases in cifs (vers=1.0)
where with backupuid mounts we retry the query info with findfirst.
This doesn't work to some NetApp servers which don't support
WindowsXP (and later) infolevel 261 (SMB_FIND_FILE_ID_FULL_DIR_INFO)
so in this case use other info levels (in this case it will usually
be level 257, SMB_FIND_FILE_DIRECTORY_INFO).

(Also fixes some indentation)

See kernel bugzilla 201435

Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

compiler.h: update definition of unreachable()

[ Upstream commit fe0640eb30b7da261ae84d252ed9ed3c7e68dfd8 ]

Fixes the objtool warning seen with Clang:
arch/x86/mm/fault.o: warning: objtool: no_context()+0x220: unreachable
instruction

Fixes commit 815f0ddb346c ("include/linux/compiler*.h: make compiler-*.h
mutually exclusive")

Josh noted that the fallback definition was meant to work around a
pre-gcc-4.6 bug. GCC still needs to work around
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82365, so compiler-gcc.h
defines its own version of unreachable(). Clang and ICC can use this
shared definition.

Link: https://github.com/ClangBuiltLinux/linux/issues/204
Suggested-by: Andy Lutomirski <luto@amacapital.net>
Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: nVMX: restore host state in nested_vmx_vmexit for VMFail

[ Upstream commit bd18bffca35397214ae68d85cf7203aca25c3c1d ]

A VMEnter that VMFails (as opposed to VMExits) does not touch host
state beyond registers that are explicitly noted in the VMFail path,
e.g. EFLAGS.  Host state does not need to be loaded because VMFail
is only signaled for consistency checks that occur before the CPU
starts to load guest state, i.e. there is no need to restore any
state as nothing has been modified.  But in the case where a VMFail
is detected by hardware and not by KVM (due to deferring consistency
checks to hardware), KVM has already loaded some amount of guest
state.  Luckily, "loaded" only means loaded to KVM's software model,
i.e. vmcs01 has not been modified.  So, unwind our software model to
the pre-VMEntry host state.

Not restoring host state in this VMFail path leads to a variety of
failures because we end up with stale data in vcpu->arch, e.g. CR0,
CR4, EFER, etc... will all be out of sync relative to vmcs01.  Any
significant delta in the stale data is all but guaranteed to crash
L1, e.g. emulation of SMEP, SMAP, UMIP, WP, etc... will be wrong.

An alternative to this "soft" reload would be to load host state from
vmcs12 as if we triggered a VMExit (as opposed to VMFail), but that is
wildly inconsistent with respect to the VMX architecture, e.g. an L1
VMM with separate VMExit and VMFail paths would explode.

Note that this approach does not mean KVM is 100% accurate with
respect to VMX hardware behavior, even at an architectural level
(the exact order of consistency checks is microarchitecture specific).
But 100% emulation accuracy isn't the goal (with this patch), rather
the goal is to be consistent in the information delivered to L1, e.g.
a VMExit should not fall-through VMENTER, and a VMFail should not jump
to HOST_RIP.

This technically reverts commit "5af4157388ad (KVM: nVMX: Fix mmu
context after VMLAUNCH/VMRESUME failure)", but retains the core
aspects of that patch, just in an open coded form due to the need to
pull state from vmcs01 instead of vmcs12.  Restoring host state
resolves a variety of issues introduced by commit "4f350c6dbcb9
(kvm: nVMX: Handle deferred early VMLAUNCH/VMRESUME failure properly)",
which remedied the incorrect behavior of treating VMFail like VMExit
but in doing so neglected to restore arch state that had been modified
prior to attempting nested VMEnter.

A sample failure that occurs due to stale vcpu.arch state is a fault
of some form while emulating an LGDT (due to emulated UMIP) from L1
after a failed VMEntry to L3, in this case when running the KVM unit
test test_tpr_threshold_values in L1.  L0 also hits a WARN in this
case due to a stale arch.cr4.UMIP.

L1:
  BUG: unable to handle kernel paging request at ffffc90000663b9e
  PGD 276512067 P4D 276512067 PUD 276513067 PMD 274efa067 PTE 8000000271de2163
  Oops: 0009 [#1] SMP
  CPU: 5 PID: 12495 Comm: qemu-system-x86 Tainted: G        W         4.18.0-rc2+ #2
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
  RIP: 0010:native_load_gdt+0x0/0x10

  ...

  Call Trace:
   load_fixmap_gdt+0x22/0x30
   __vmx_load_host_state+0x10e/0x1c0 [kvm_intel]
   vmx_switch_vmcs+0x2d/0x50 [kvm_intel]
   nested_vmx_vmexit+0x222/0x9c0 [kvm_intel]
   vmx_handle_exit+0x246/0x15a0 [kvm_intel]
   kvm_arch_vcpu_ioctl_run+0x850/0x1830 [kvm]
   kvm_vcpu_ioctl+0x3a1/0x5c0 [kvm]
   do_vfs_ioctl+0x9f/0x600
   ksys_ioctl+0x66/0x70
   __x64_sys_ioctl+0x16/0x20
   do_syscall_64+0x4f/0x100
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

L0:
  WARNING: CPU: 2 PID: 3529 at arch/x86/kvm/vmx.c:6618 handle_desc+0x28/0x30 [kvm_intel]
  ...
  CPU: 2 PID: 3529 Comm: qemu-system-x86 Not tainted 4.17.2-coffee+ #76
  Hardware name: Intel Corporation Kabylake Client platform/KBL S
  RIP: 0010:handle_desc+0x28/0x30 [kvm_intel]

  ...

  Call Trace:
   kvm_arch_vcpu_ioctl_run+0x863/0x1840 [kvm]
   kvm_vcpu_ioctl+0x3a1/0x5c0 [kvm]
   do_vfs_ioctl+0x9f/0x5e0
   ksys_ioctl+0x66/0x70
   __x64_sys_ioctl+0x16/0x20
   do_syscall_64+0x49/0xf0
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 5af4157388ad (KVM: nVMX: Fix mmu context after VMLAUNCH/VMRESUME failure)
Fixes: 4f350c6dbcb9 (kvm: nVMX: Handle deferred early VMLAUNCH/VMRESUME failure properly)
Cc: Jim Mattson <jmattson@google.com>
Cc: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim KrÄmÃ¡Å™ <rkrcmar@redhat.com>
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI / SBS: Fix GPE storm on recent MacBookPro's

[ Upstream commit ca1721c5bee77105829cbd7baab8ee0eab85b06d ]

On Apple machines, plugging-in or unplugging the power triggers a GPE
for the EC. Since these machines expose an SBS device, this GPE ends
up triggering the acpi_sbs_callback(). This in turn tries to get the
status of the SBS charger. However, on MBP13,* and MBP14,* machines,
performing the smbus-read operation to get the charger's status triggers
the EC's GPE again. The result is an endless re-triggering and handling
of that GPE, consuming significant CPU resources (> 50% in irq).

In the end this is quite similar to commit 3031cddea633 (ACPI / SBS:
Don't assume the existence of an SBS charger), except that on the above
machines a status of all 1's is returned. And like there, we just want
ignore the charger here.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=198169
Signed-off-by: Ronald TschalÃ¤r <ronald@innovation.ch>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usbip: fix vhci_hcd controller counting

[ Upstream commit e0a2e73e501c77037c8756137e87b12c7c3c9793 ]

Without this usbip fails on a machine with devices
that lexicographically come after vhci_hcd.

ie.
  $ ls -l /sys/devices/platform
  ...
  drwxr-xr-x. 4 root root    0 Sep 19 16:21 serial8250
  -rw-r--r--. 1 root root 4096 Sep 19 23:50 uevent
  drwxr-xr-x. 6 root root    0 Sep 20 13:15 vhci_hcd.0
  drwxr-xr-x. 4 root root    0 Sep 19 16:22 w83627hf.656

Because it detects 'w83627hf.656' as another vhci_hcd controller,
and then fails to be able to talk to it.

Note: this doesn't actually fix usbip's support for multiple
controllers... that's still broken for other reasons
("vhci_hcd.0" is hardcoded in a string macro), but is enough to
actually make it work on the above machine.

See also:
  https://bugzilla.redhat.com/show_bug.cgi?id=1631148

Cc: Jonathan Dieter <jdieter@gmail.com>
Cc: Valentina Manea <valentina.manea.m@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-usb@vger.kernel.org
Signed-off-by: Maciej Żenczykowski <zenczykowski@gmail.com>
Acked-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Tested-by: Jonathan Dieter <jdieter@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: samsung: Limit SAMSUNG_PM_CHECK config option to non-Exynos platforms

[ Upstream commit 6862fdf2201ab67cd962dbf0643d37db909f4860 ]

"S3C2410 PM Suspend Memory CRC" feature (controlled by
SAMSUNG_PM_CHECK config option) is incompatible with highmem
(uses phys_to_virt() instead of proper mapping) which is used by
the majority of Exynos boards. The issue manifests itself in OOPS
on affected boards, i.e. on Odroid-U3 I got the following one:

Unable to handle kernel paging request at virtual address f0000000
pgd = 1c0f9bb4
[f0000000] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT SMP ARM
[<c0458034>] (crc32_le) from [<c0121f8c>] (s3c_pm_makecheck+0x34/0x54)
[<c0121f8c>] (s3c_pm_makecheck) from [<c0121efc>] (s3c_pm_run_res+0x74/0x8c)
[<c0121efc>] (s3c_pm_run_res) from [<c0121ecc>] (s3c_pm_run_res+0x44/0x8c)
[<c0121ecc>] (s3c_pm_run_res) from [<c01210b8>] (exynos_suspend_enter+0x64/0x148)
[<c01210b8>] (exynos_suspend_enter) from [<c018893c>] (suspend_devices_and_enter+0x9ec/0xe74)
[<c018893c>] (suspend_devices_and_enter) from [<c0189534>] (pm_suspend+0x770/0xc04)
[<c0189534>] (pm_suspend) from [<c0186ce8>] (state_store+0x6c/0xcc)
[<c0186ce8>] (state_store) from [<c09db434>] (kobj_attr_store+0x14/0x20)
[<c09db434>] (kobj_attr_store) from [<c02fa63c>] (sysfs_kf_write+0x4c/0x50)
[<c02fa63c>] (sysfs_kf_write) from [<c02f97a4>] (kernfs_fop_write+0xfc/0x1e4)
[<c02f97a4>] (kernfs_fop_write) from [<c027b198>] (__vfs_write+0x2c/0x140)
[<c027b198>] (__vfs_write) from [<c027b418>] (vfs_write+0xa4/0x160)
[<c027b418>] (vfs_write) from [<c027b5d8>] (ksys_write+0x40/0x8c)
[<c027b5d8>] (ksys_write) from [<c0101000>] (ret_fast_syscall+0x0/0x28)

Add PLAT_S3C24XX, ARCH_S3C64XX and ARCH_S5PV210 dependencies to
SAMSUNG_PM_CHECK config option to hide it on Exynos platforms.

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: i2c-hid: override HID descriptors for certain devices

[ Upstream commit 9ee3e06610fdb8a601cde59c92089fb6c1deb4aa ]

A particular touchpad (SIPODEV SP1064) refuses to supply the HID
descriptors. This patch provides the framework for overriding these
descriptors based on DMI data. It also includes the descriptors for
said touchpad, which were extracted by listening to the traffic of the
windows filter driver, as well as the DMI data for the laptops known
to use this device.

Relevant Bug: https://bugzilla.redhat.com/show_bug.cgi?id=1526312

Cc: Hans de Goede <hdegoede@redhat.com>
Reported-and-tested-by: ahormann@gmx.net
Reported-and-tested-by: Bruno Jesus <bruno.fl.jesus@gmail.com>
Reported-and-tested-by: Dietrich <enaut.w@googlemail.com>
Reported-and-tested-by: kloxdami@yahoo.com
Signed-off-by: Julian Sax <jsbc@gmx.de>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: au0828: cannot kfree dev before usb disconnect

[ Upstream commit 4add7104919f9e94e0db03e234caeadbfcc02ea9 ]

If au0828_analog_register fails, the dev is kfree'd and then flow
jumps to done, which can call au0828_usb_disconnect. Since all USB
error codes are negative, au0828_usb_disconnect will be called. The
problem is au0828_usb_disconnect uses dev, if dev is NULL then there
is immediate oops encountered.

[    7.454307] au0828: au0828_usb_probe() au0282_dev_register failed to register on V4L2
[    7.454323] BUG: unable to handle kernel NULL pointer dereference at 0000000000000050
[    7.454421] PGD 0 P4D 0
[    7.454457] Oops: 0002 [#1] SMP PTI
[    7.454500] CPU: 1 PID: 262 Comm: systemd-udevd Tainted: P           O      4.18.3 #1
[    7.454584] Hardware name: Google Panther/Panther, BIOS MattDevo 04/27/2015
[    7.454670] RIP: 0010:_raw_spin_lock_irqsave+0x2c/0x50
[    7.454725] Code: 44 00 00 55 48 89 e5 41 54 53 48 89 fb 9c 58 0f 1f 44 00 00 49 89 c4 fa 66 0f 1f 44 00 00 e8 db 23 1b ff 31 c0 ba 01 00 00 00 <f0> 0f b1 13 85 c0 75 08 4c 89 e0 5b 41 5c 5d c3 89 c6 48 89 df e8
[    7.455004] RSP: 0018:ffff9130f53ef988 EFLAGS: 00010046
[    7.455063] RAX: 0000000000000000 RBX: 0000000000000050 RCX: 0000000000000000
[    7.455139] RDX: 0000000000000001 RSI: 0000000000000003 RDI: 0000000000000050
[    7.455216] RBP: ffff9130f53ef998 R08: 0000000000000018 R09: 0000000000000090
[    7.455292] R10: ffffed4cc53cb000 R11: ffffed4cc53cb108 R12: 0000000000000082
[    7.455369] R13: ffff9130cf2c6188 R14: 0000000000000000 R15: 0000000000000018
[    7.455447] FS:  00007f2ff8514cc0(0000) GS:ffff9130fcb00000(0000) knlGS:0000000000000000
[    7.455535] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    7.455597] CR2: 0000000000000050 CR3: 00000001753f0002 CR4: 00000000000606a0
[    7.455675] Call Trace:
[    7.455713]  __wake_up_common_lock+0x65/0xc0
[    7.455764]  __wake_up+0x13/0x20
[    7.455808]  ir_lirc_unregister+0x57/0xe0 [rc_core]
[    7.455865]  rc_unregister_device+0xa0/0xc0 [rc_core]
[    7.455935]  au0828_rc_unregister+0x25/0x40 [au0828]
[    7.455999]  au0828_usb_disconnect+0x33/0x80 [au0828]
[    7.456064]  au0828_usb_probe.cold.16+0x8d/0x2aa [au0828]
[    7.456130]  usb_probe_interface+0xf1/0x300
[    7.456184]  driver_probe_device+0x2e3/0x460
[    7.456235]  __driver_attach+0xe4/0x110
[    7.456282]  ? driver_probe_device+0x460/0x460
[    7.456335]  bus_for_each_dev+0x74/0xb0
[    7.456385]  ? kmem_cache_alloc_trace+0x15d/0x1d0
[    7.456441]  driver_attach+0x1e/0x20
[    7.456485]  bus_add_driver+0x159/0x230
[    7.456532]  driver_register+0x70/0xc0
[    7.456578]  usb_register_driver+0x7f/0x140
[    7.456626]  ? 0xffffffffc0474000
[    7.456674]  au0828_init+0xbc/0x1000 [au0828]
[    7.456725]  do_one_initcall+0x4a/0x1c9
[    7.456771]  ? _cond_resched+0x19/0x30
[    7.456817]  ? kmem_cache_alloc_trace+0x15d/0x1d0
[    7.456873]  do_init_module+0x60/0x210
[    7.456918]  load_module+0x221b/0x2710
[    7.456966]  ? vfs_read+0xf5/0x120
[    7.457010]  __do_sys_finit_module+0xbd/0x120
[    7.457061]  ? __do_sys_finit_module+0xbd/0x120
[    7.457115]  __x64_sys_finit_module+0x1a/0x20
[    7.457166]  do_syscall_64+0x5b/0x110
[    7.457210]  entry_SYSCALL_64_after_hwframe+0x49/0xbe

Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/pseries: Remove prrn_work workqueue

[ Upstream commit cd24e457fd8b2d087d9236700c8d2957054598bf ]

When a PRRN event is received we are already running in a worker
thread. Instead of spawning off another worker thread on the prrn_work
workqueue to handle the PRRN event we can just call the PRRN handler
routine directly.

With this update we can also pass the scope variable for the PRRN
event directly to the handler instead of it being a global variable.

This patch fixes the following oops mnessage we are seeing in PRRN testing:

  Oops: Bad kernel stack pointer, sig: 6 [#1]
  SMP NR_CPUS=2048 NUMA pSeries
  Modules linked in: nfsv3 nfs_acl rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace sunrpc fscache binfmt_misc reiserfs vfat fat rpadlpar_io(X) rpaphp(X) tcp_diag udp_diag inet_diag unix_diag af_packet_diag netlink_diag af_packet xfs libcrc32c dm_service_time ibmveth(X) ses enclosure scsi_transport_sas rtc_generic btrfs xor raid6_pq sd_mod ibmvscsi(X) scsi_transport_srp ipr(X) libata sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua scsi_mod autofs4
  Supported: Yes, External                                                     54
  CPU: 7 PID: 18967 Comm: kworker/u96:0 Tainted: G                 X 4.4.126-94.22-default #1
  Workqueue: pseries hotplug workque pseries_hp_work_fn
  task: c000000775367790 ti: c00000001ebd4000 task.ti: c00000070d140000
  NIP: 0000000000000000 LR: 000000001fb3d050 CTR: 0000000000000000
  REGS: c00000001ebd7d40 TRAP: 0700   Tainted: G                 X  (4.4.126-94.22-default)
  MSR: 8000000102081000 <41,VEC,ME5  CR: 28000002  XER: 20040018   4
  CFAR: 000000001fb3d084 40 419   1                                3
  GPR00: 000000000000000040000000000010007 000000001ffff400 000000041fffe200
  GPR04: 000000000000008050000000000000000 000000001fb15fa8 0000000500000500
  GPR08: 000000000001f40040000000000000001 0000000000000000 000005:5200040002
  GPR12: 00000000000000005c000000007a05400 c0000000000e89f8 000000001ed9f668
  GPR16: 000000001fbeff944000000001fbeff94 000000001fb545e4 0000006000000060
  GPR20: ffffffffffffffff4ffffffffffffffff 0000000000000000 0000000000000000
  GPR24: 00000000000000005400000001fb3c000 0000000000000000 000000001fb1b040
  GPR28: 000000001fb240004000000001fb440d8 0000000000000008 0000000000000000
  NIP [0000000000000000] 5         (null)
  LR [000000001fb3d050] 031fb3d050
  Call Trace:            4
  Instruction dump:      4                                       5:47 12    2
  XXXXXXXX XXXXXXXX XXXXX4XX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
  XXXXXXXX XXXXXXXX XXXXX5XX XXXXXXXX 60000000 60000000 60000000 60000000
  ---[ end trace aa5627b04a7d9d6b ]---                                       3NMI watchdog: BUG: soft lockup - CPU#27 stuck for 23s! [kworker/27:0:13903]
  Modules linked in: nfsv3 nfs_acl rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace sunrpc fscache binfmt_misc reiserfs vfat fat rpadlpar_io(X) rpaphp(X) tcp_diag udp_diag inet_diag unix_diag af_packet_diag netlink_diag af_packet xfs libcrc32c dm_service_time ibmveth(X) ses enclosure scsi_transport_sas rtc_generic btrfs xor raid6_pq sd_mod ibmvscsi(X) scsi_transport_srp ipr(X) libata sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua scsi_mod autofs4
  Supported: Yes, External
  CPU: 27 PID: 13903 Comm: kworker/27:0 Tainted: G      D          X 4.4.126-94.22-default #1
  Workqueue: events prrn_work_fn
  task: c000000747cfa390 ti: c00000074712c000 task.ti: c00000074712c000
  NIP: c0000000008002a8 LR: c000000000090770 CTR: 000000000032e088
  REGS: c00000074712f7b0 TRAP: 0901   Tainted: G      D          X  (4.4.126-94.22-default)
  MSR: 8000000100009033 <SF,EE,ME,IR,DR,RI,LE>  CR: 22482044  XER: 20040000
  CFAR: c0000000008002c4 SOFTE: 1
  GPR00: c000000000090770 c00000074712fa30 c000000000f09800 c000000000fa1928 6:02
  GPR04: c000000775f5e000 fffffffffffffffe 0000000000000001 c000000000f42db8
  GPR08: 0000000000000001 0000000080000007 0000000000000000 0000000000000000
  GPR12: 8006210083180000 c000000007a14400
  NIP [c0000000008002a8] _raw_spin_lock+0x68/0xd0
  LR [c000000000090770] mobility_rtas_call+0x50/0x100
  Call Trace:            59                                        5
  [c00000074712fa60] [c000000000090770] mobility_rtas_call+0x50/0x100
  [c00000074712faf0] [c000000000090b08] pseries_devicetree_update+0xf8/0x530
  [c00000074712fc20] [c000000000031ba4] prrn_work_fn+0x34/0x50
  [c00000074712fc40] [c0000000000e0390] process_one_work+0x1a0/0x4e0
  [c00000074712fcd0] [c0000000000e0870] worker_thread+0x1a0/0x6105:57       2
  [c00000074712fd80] [c0000000000e8b18] kthread+0x128/0x150
  [c00000074712fe30] [c0000000000096f8] ret_from_kernel_thread+0x5c/0x64
  Instruction dump:
  2c090000 40c20010 7d40192d 40c2fff0 7c2004ac 2fa90000 40de0018 5:540030   3
  e8010010 ebe1fff8 7c0803a6 4e800020 <7c210b78> e92d0000 89290009 792affe3

Signed-off-by: John Allen <jallen@linux.ibm.com>
Signed-off-by: Haren Myneni <haren@us.ibm.com>
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: uartps: console_setup() can't be placed to init section

[ Upstream commit 4bb1ce2350a598502b23088b169e16b43d4bc639 ]

When console device is rebinded, console_setup() is called again.
But marking it as __init means that function will be clear after boot is
complete. If console device is binded again console_setup() is not found
and error "Unable to handle kernel paging request at virtual address"
is reported.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: xt_cgroup: shrink size of v2 path

[ Upstream commit 0d704967f4a49cc2212350b3e4a8231f8b4283ed ]

cgroup v2 path field is PATH_MAX which is too large, this is placing too
much pressure on memory allocation for people with many rules doing
cgroup v1 classid matching, side effects of this are bug reports like:

https://bugzilla.kernel.org/show_bug.cgi?id=200639

This patch registers a new revision that shrinks the cgroup path to 512
bytes, which is the same approach we follow in similar extensions that
have a path field.

Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix to do sanity check with current segment number

[ Upstream commit 042be0f849e5fc24116d0afecfaf926eed5cac63 ]

https://bugzilla.kernel.org/show_bug.cgi?id=200219

Reproduction way:
- mount image
- run poc code
- umount image

F2FS-fs (loop1): Bitmap was wrongly set, blk:15364
------------[ cut here ]------------
kernel BUG at /home/yuchao/git/devf2fs/segment.c:2061!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 2 PID: 17686 Comm: umount Tainted: G        W  O      4.18.0-rc2+ #39
Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
EIP: update_sit_entry+0x459/0x4e0 [f2fs]
Code: e8 1c b5 fd ff 0f 0b 0f 0b 8b 45 e4 c7 44 24 08 9c 7a 6c f8 c7 44 24 04 bc 4a 6c f8 89 44 24 0c 8b 06 89 04 24 e8 f7 b4 fd ff <0f> 0b 8b 45 e4 0f b6 d2 89 54 24 10 c7 44 24 08 60 7a 6c f8 c7 44
EAX: 00000032 EBX: 000000f8 ECX: 00000002 EDX: 00000001
ESI: d7177000 EDI: f520fe68 EBP: d6477c6c ESP: d6477c34
DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010282
CR0: 80050033 CR2: b7fbe000 CR3: 2a99b3c0 CR4: 000406f0
Call Trace:
f2fs_allocate_data_block+0x124/0x580 [f2fs]
do_write_page+0x78/0x150 [f2fs]
f2fs_do_write_node_page+0x25/0xa0 [f2fs]
__write_node_page+0x2bf/0x550 [f2fs]
f2fs_sync_node_pages+0x60e/0x6d0 [f2fs]
? sync_inode_metadata+0x2f/0x40
? f2fs_write_checkpoint+0x28f/0x7d0 [f2fs]
? up_write+0x1e/0x80
f2fs_write_checkpoint+0x2a9/0x7d0 [f2fs]
? mark_held_locks+0x5d/0x80
? _raw_spin_unlock_irq+0x27/0x50
kill_f2fs_super+0x68/0x90 [f2fs]
deactivate_locked_super+0x3d/0x70
deactivate_super+0x40/0x60
cleanup_mnt+0x39/0x70
__cleanup_mnt+0x10/0x20
task_work_run+0x81/0xa0
exit_to_usermode_loop+0x59/0xa7
do_fast_syscall_32+0x1f5/0x22c
entry_SYSENTER_32+0x53/0x86
EIP: 0xb7f95c51
Code: c1 1e f7 ff ff 89 e5 8b 55 08 85 d2 8b 81 64 cd ff ff 74 02 89 02 5d c3 8b 0c 24 c3 8b 1c 24 c3 90 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d 76 00 58 b8 77 00 00 00 cd 80 90 8d 76
EAX: 00000000 EBX: 0871ab90 ECX: bfb2cd00 EDX: 00000000
ESI: 00000000 EDI: 0871ab90 EBP: 0871ab90 ESP: bfb2cd7c
DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00000246
Modules linked in: f2fs(O) crc32_generic bnep rfcomm bluetooth ecdh_generic snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq pcbc joydev aesni_intel snd_seq_device aes_i586 snd_timer crypto_simd snd cryptd soundcore mac_hid serio_raw video i2c_piix4 parport_pc ppdev lp parport hid_generic psmouse usbhid hid e1000 [last unloaded: f2fs]
---[ end trace d423f83982cfcdc5 ]---

The reason is, different log headers using the same segment, once
one log's next block address is used by another log, it will cause
panic as above.

Main area: 24 segs, 24 secs 24 zones
  - COLD  data: 0, 0, 0
  - WARM  data: 1, 1, 1
  - HOT   data: 20, 20, 20
  - Dir   dnode: 22, 22, 22
  - File   dnode: 22, 22, 22
  - Indir nodes: 21, 21, 21

So this patch adds sanity check to detect such condition to avoid
this issue.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

9p locks: add mount option for lock retry interval

[ Upstream commit 5e172f75e51e3de1b4274146d9b990f803cb5c2a ]

The default P9_LOCK_TIMEOUT can be too long for some users exporting
a local file system to a guest VM (30s), make this configurable at
mount time.

Link: http://lkml.kernel.org/r/1536295827-3181-1-git-send-email-asmadeus@codewreck.org
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195727
Signed-off-by: Dinu-Razvan Chis-Serban <justcsdr@gmail.com>
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Signed-off-by: Sasha Levin <sashal@kernel.org>

9p: do not trust pdu content for stat item size

[ Upstream commit 2803cf4379ed252894f046cb8812a48db35294e3 ]

v9fs_dir_readdir() could deadloop if a struct was sent with a size set
to -2

Link: http://lkml.kernel.org/r/1536134432-11997-1-git-send-email-asmadeus@codewreck.org
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88021
Signed-off-by: Gertjan Halkes <gertjan@google.com>
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rsi: improve kernel thread handling to fix kernel panic

[ Upstream commit 4c62764d0fc21a34ffc44eec1210038c3a2e4473 ]

While running regressions, observed below kernel panic when sdio disconnect
called. This is because of, kthread_stop() is taking care of
wait_for_completion() by default. When wait_for_completion triggered
in kthread_stop and as it was done already, giving kernel panic.
Hence, removing redundant wait_for_completion() from rsi_kill_thread().

... skipping ...
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffff810a63df>] exit_creds+0x1f/0x50
PGD 0
Oops: 0002 [#1] SMP
CPU: 0 PID: 6502 Comm: rmmod Tainted: G OE 4.15.9-Generic #154-Ubuntu
Hardware name: Dell Inc. Edge Gateway 3003/ , BIOS 01.00.00 04/17/2017
Stack:
ffff88007392e600 ffff880075847dc0 ffffffff8108160a 0000000000000000
ffff88007392e600 ffff880075847de8 ffffffff810a484b ffff880076127000
ffff88003cd3a800 ffff880074f12a00 ffff880075847e28 ffffffffc09bed15
Call Trace:
[<ffffffff8108160a>] __put_task_struct+0x5a/0x140
[<ffffffff810a484b>] kthread_stop+0x10b/0x110
[<ffffffffc09bed15>] rsi_disconnect+0x2f5/0x300 [ven_rsi_sdio]
[<ffffffff81578bcb>] ? __pm_runtime_resume+0x5b/0x80
[<ffffffff816f0918>] sdio_bus_remove+0x38/0x100
[<ffffffff8156cc64>] __device_release_driver+0xa4/0x150
[<ffffffff8156d7a5>] driver_detach+0xb5/0xc0
[<ffffffff8156c6c5>] bus_remove_driver+0x55/0xd0
[<ffffffff8156dfbc>] driver_unregister+0x2c/0x50
[<ffffffff816f0b8a>] sdio_unregister_driver+0x1a/0x20
[<ffffffffc09bf0f5>] rsi_module_exit+0x15/0x30 [ven_rsi_sdio]
[<ffffffff8110cad8>] SyS_delete_module+0x1b8/0x210
[<ffffffff81851dc8>] entry_SYSCALL_64_fastpath+0x1c/0xbb

Signed-off-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: pxa: handle corner case of unprobed device

[ Upstream commit 9ce3ebe973bf4073426f35f282c6b955ed802765 ]

In the corner case where the gpio driver probe fails, for whatever
reason, the suspend and resume handlers will still be called as they
have to be registered as syscore operations. This applies as well when
no probe was called while the driver has been built in the kernel.

Nicolas tracked this in :
https://bugzilla.kernel.org/show_bug.cgi?id=200905

Therefore, add a failsafe in these function, and test if a proper probe
succeeded and the driver is functional.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Reported-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: prohibit fstrim in norecovery mode

[ Upstream commit 18915b5873f07e5030e6fb108a050fa7c71c59fb ]

The ext4 fstrim implementation uses the block bitmaps to find free space
that can be discarded. If we haven't replayed the journal, the bitmaps
will be stale and we absolutely *cannot* use stale metadata to zap the
underlying storage.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fix incorrect error code mapping for OBJECTID_NOT_FOUND

[ Upstream commit 85f9987b236cf46e06ffdb5c225cf1f3c0acb789 ]

It was mapped to EIO which can be confusing when user space
queries for an object GUID for an object for which the server
file system doesn't support (or hasn't saved one).

As Amir Goldstein suggested this is similar to ENOATTR
(equivalently ENODATA in Linux errno definitions) so
changing NT STATUS code mapping for OBJECTID_NOT_FOUND
to ENODATA.

Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/hw_breakpoints: Make default case in hw_breakpoint_arch_parse() return an error

[ Upstream commit e898e69d6b9475bf123f99b3c5d1a67bb7cb2361 ]

When building with -Wsometimes-uninitialized, Clang warns:

arch/x86/kernel/hw_breakpoint.c:355:2: warning: variable 'align' is used
uninitialized whenever switch default is taken
[-Wsometimes-uninitialized]

The default cannot be reached because arch_build_bp_info() initializes
hw->len to one of the specified cases. Nevertheless the warning is valid
and returning -EINVAL makes sure that this cannot be broken by future
modifications.

Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: clang-built-linux@googlegroups.com
Link: https://github.com/ClangBuiltLinux/linux/issues/392
Link: https://lkml.kernel.org/r/20190307212756.4648-1-natechancellor@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/vt-d: Check capability before disabling protected memory

[ Upstream commit 5bb71fc790a88d063507dc5d445ab8b14e845591 ]

The spec states in 10.4.16 that the Protected Memory Enable
Register should be treated as read-only for implementations
not supporting protected memory regions (PLMR and PHMR fields
reported as Clear in the Capability register).

Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: mark gross <mgross@intel.com>
Suggested-by: Ashok Raj <ashok.raj@intel.com>
Fixes: f8bab73515ca5 ("intel-iommu: PMEN support")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/nouveau/debugfs: Fix check of pm_runtime_get_sync failure

[ Upstream commit 909e9c9c428376e2a43d178ed4b0a2d5ba9cb7d3 ]

pm_runtime_get_sync returns negative on failure.

Fixes: eaeb9010bb4b ("drm/nouveau/debugfs: Wake up GPU before doing any reclocking")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/cpu/cyrix: Use correct macros for Cyrix calls on Geode processors

[ Upstream commit 18fb053f9b827bd98cfc64f2a35df8ab19745a1d ]

There are comments in processor-cyrix.h advising you to _not_ make calls
using the deprecated macros in this style:

  setCx86_old(CX86_CCR4, getCx86_old(CX86_CCR4) | 0x80);

This is because it expands the macro into a non-functioning calling
sequence. The calling order must be:

  outb(CX86_CCR2, 0x22);
  inb(0x23);

From the comments:

* When using the old macros a line like
*   setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x88);
* gets expanded to:
*  do {
*    outb((CX86_CCR2), 0x22);
*    outb((({
*        outb((CX86_CCR2), 0x22);
*        inb(0x23);
*    }) | 0x88), 0x23);
*  } while (0);

The new macros fix this problem, so use them instead. Tested on an
actual Geode processor.

Signed-off-by: Matthew Whitehead <tedheadster@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: luto@kernel.org
Link: https://lkml.kernel.org/r/1552596361-8967-2-git-send-email-tedheadster@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/hpet: Prevent potential NULL pointer dereference

[ Upstream commit 2e84f116afca3719c9d0a1a78b47b48f75fd5724 ]

hpet_virt_address may be NULL when ioremap_nocache fail, but the code lacks
a check.

Add a check to prevent NULL pointer dereference.

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: kjlu@umn.edu
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Joe Perches <joe@perches.com>
Cc: Nicolai Stange <nstange@suse.de>
Cc: Roland Dreier <roland@purestorage.com>
Link: https://lkml.kernel.org/r/20190319021958.17275-1-pakki001@umn.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/mbigen: Don't clear eventid when freeing an MSI

[ Upstream commit fca269f201a8d9985c0a31fb60b15d4eb57cef80 ]

mbigen_write_msg clears eventid bits of a mbigen register
when free a interrupt, because msi_domain_deactivate memset
struct msg to zero. Then multiple mbigen pins with zero eventid
will report the same interrupt number.

The eventid clear call trace:
                free_irq
                __free_irq
                irq_shutdown
                irq_domain_deactivate_irq
                __irq_domain_deactivate_irq
                __irq_domain_deactivate_irq
                msi_domain_deactivate
                platform_msi_write_msg
                mbigen_write_msg

Signed-off-by: Jianguo Chen <chenjianguo3@huawei.com>
[maz: massaged subject]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf tests: Fix a memory leak in test__perf_evsel__tp_sched_test()

[ Upstream commit d982b33133284fa7efa0e52ae06b88f9be3ea764 ]

  =================================================================
  ==20875==ERROR: LeakSanitizer: detected memory leaks

  Direct leak of 1160 byte(s) in 1 object(s) allocated from:
      #0 0x7f1b6fc84138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138)
      #1 0x55bd50005599 in zalloc util/util.h:23
      #2 0x55bd500068f5 in perf_evsel__newtp_idx util/evsel.c:327
      #3 0x55bd4ff810fc in perf_evsel__newtp /home/work/linux/tools/perf/util/evsel.h:216
      #4 0x55bd4ff81608 in test__perf_evsel__tp_sched_test tests/evsel-tp-sched.c:69
      #5 0x55bd4ff528e6 in run_test tests/builtin-test.c:358
      #6 0x55bd4ff52baf in test_and_print tests/builtin-test.c:388
      #7 0x55bd4ff543fe in __cmd_test tests/builtin-test.c:583
      #8 0x55bd4ff5572f in cmd_test tests/builtin-test.c:722
      #9 0x55bd4ffc4087 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302
      #10 0x55bd4ffc45c6 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354
      #11 0x55bd4ffc49ca in run_argv /home/changbin/work/linux/tools/perf/perf.c:398
      #12 0x55bd4ffc5138 in main /home/changbin/work/linux/tools/perf/perf.c:520
      #13 0x7f1b6e34809a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)

  Indirect leak of 19 byte(s) in 1 object(s) allocated from:
      #0 0x7f1b6fc83f30 in __interceptor_malloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xedf30)
      #1 0x7f1b6e3ac30f in vasprintf (/lib/x86_64-linux-gnu/libc.so.6+0x8830f)

Signed-off-by: Changbin Du <changbin.du@gmail.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fixes: 6a6cd11d4e57 ("perf test: Add test for the sched tracepoint format fields")
Link: http://lkml.kernel.org/r/20190316080556.3075-17-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf tests: Fix memory leak by expr__find_other() in test__expr()

[ Upstream commit f97a8991d3b998e518f56794d879f645964de649 ]

  =================================================================
  ==7506==ERROR: LeakSanitizer: detected memory leaks

  Direct leak of 13 byte(s) in 3 object(s) allocated from:
      #0 0x7f03339d6070 in __interceptor_strdup (/usr/lib/x86_64-linux-gnu/libasan.so.5+0x3b070)
      #1 0x5625e53aaef0 in expr__find_other util/expr.y:221
      #2 0x5625e51bcd3f in test__expr tests/expr.c:52
      #3 0x5625e51528e6 in run_test tests/builtin-test.c:358
      #4 0x5625e5152baf in test_and_print tests/builtin-test.c:388
      #5 0x5625e51543fe in __cmd_test tests/builtin-test.c:583
      #6 0x5625e515572f in cmd_test tests/builtin-test.c:722
      #7 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302
      #8 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354
      #9 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398
      #10 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520
      #11 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)

Signed-off-by: Changbin Du <changbin.du@gmail.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fixes: 075167363f8b ("perf tools: Add a simple expression parser for JSON")
Link: http://lkml.kernel.org/r/20190316080556.3075-16-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf tests: Fix a memory leak of cpu_map object in the openat_syscall_event_on_all_cpus test

[ Upstream commit 93faa52e8371f0291ee1ff4994edae2b336b6233 ]

  =================================================================
  ==7497==ERROR: LeakSanitizer: detected memory leaks

  Direct leak of 40 byte(s) in 1 object(s) allocated from:
      #0 0x7f0333a88f30 in __interceptor_malloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xedf30)
      #1 0x5625e5326213 in cpu_map__trim_new util/cpumap.c:45
      #2 0x5625e5326703 in cpu_map__read util/cpumap.c:103
      #3 0x5625e53267ef in cpu_map__read_all_cpu_map util/cpumap.c:120
      #4 0x5625e5326915 in cpu_map__new util/cpumap.c:135
      #5 0x5625e517b355 in test__openat_syscall_event_on_all_cpus tests/openat-syscall-all-cpus.c:36
      #6 0x5625e51528e6 in run_test tests/builtin-test.c:358
      #7 0x5625e5152baf in test_and_print tests/builtin-test.c:388
      #8 0x5625e51543fe in __cmd_test tests/builtin-test.c:583
      #9 0x5625e515572f in cmd_test tests/builtin-test.c:722
      #10 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302
      #11 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354
      #12 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398
      #13 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520
      #14 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)

Signed-off-by: Changbin Du <changbin.du@gmail.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fixes: f30a79b012e5 ("perf tools: Add reference counting for cpu_map object")
Link: http://lkml.kernel.org/r/20190316080556.3075-15-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf evsel: Free evsel->counts in perf_evsel__exit()

[ Upstream commit 42dfa451d825a2ad15793c476f73e7bbc0f9d312 ]

Using gcc's ASan, Changbin reports:

  =================================================================
  ==7494==ERROR: LeakSanitizer: detected memory leaks

  Direct leak of 48 byte(s) in 1 object(s) allocated from:
      #0 0x7f0333a89138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138)
      #1 0x5625e5330a5e in zalloc util/util.h:23
      #2 0x5625e5330a9b in perf_counts__new util/counts.c:10
      #3 0x5625e5330ca0 in perf_evsel__alloc_counts util/counts.c:47
      #4 0x5625e520d8e5 in __perf_evsel__read_on_cpu util/evsel.c:1505
      #5 0x5625e517a985 in perf_evsel__read_on_cpu /home/work/linux/tools/perf/util/evsel.h:347
      #6 0x5625e517ad1a in test__openat_syscall_event tests/openat-syscall.c:47
      #7 0x5625e51528e6 in run_test tests/builtin-test.c:358
      #8 0x5625e5152baf in test_and_print tests/builtin-test.c:388
      #9 0x5625e51543fe in __cmd_test tests/builtin-test.c:583
      #10 0x5625e515572f in cmd_test tests/builtin-test.c:722
      #11 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302
      #12 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354
      #13 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398
      #14 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520
      #15 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)

  Indirect leak of 72 byte(s) in 1 object(s) allocated from:
      #0 0x7f0333a89138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138)
      #1 0x5625e532560d in zalloc util/util.h:23
      #2 0x5625e532566b in xyarray__new util/xyarray.c:10
      #3 0x5625e5330aba in perf_counts__new util/counts.c:15
      #4 0x5625e5330ca0 in perf_evsel__alloc_counts util/counts.c:47
      #5 0x5625e520d8e5 in __perf_evsel__read_on_cpu util/evsel.c:1505
      #6 0x5625e517a985 in perf_evsel__read_on_cpu /home/work/linux/tools/perf/util/evsel.h:347
      #7 0x5625e517ad1a in test__openat_syscall_event tests/openat-syscall.c:47
      #8 0x5625e51528e6 in run_test tests/builtin-test.c:358
      #9 0x5625e5152baf in test_and_print tests/builtin-test.c:388
      #10 0x5625e51543fe in __cmd_test tests/builtin-test.c:583
      #11 0x5625e515572f in cmd_test tests/builtin-test.c:722
      #12 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302
      #13 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354
      #14 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398
      #15 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520
      #16 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)

His patch took care of evsel->prev_raw_counts, but the above backtraces
are about evsel->counts, so fix that instead.

Reported-by: Changbin Du <changbin.du@gmail.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lkml.kernel.org/n/tip-hd1x13g59f0nuhe4anxhsmfp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf hist: Add missing map__put() in error case

[ Upstream commit cb6186aeffda4d27e56066c79e9579e7831541d3 ]

We need to map__put() before returning from failure of
sample__resolve_callchain().

Detected with gcc's ASan.

Signed-off-by: Changbin Du <changbin.du@gmail.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fixes: 9c68ae98c6f7 ("perf callchain: Reference count maps")
Link: http://lkml.kernel.org/r/20190316080556.3075-10-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf top: Fix error handling in cmd_top()

[ Upstream commit 70c819e4bf1c5f492768b399d898d458ccdad2b6 ]

We should go to the cleanup path, to avoid leaks, detected using gcc's
ASan.

Signed-off-by: Changbin Du <changbin.du@gmail.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20190316080556.3075-9-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf build-id: Fix memory leak in print_sdt_events()

[ Upstream commit 8bde8516893da5a5fdf06121f74d11b52ab92df5 ]

Detected with gcc's ASan:

  Direct leak of 4356 byte(s) in 120 object(s) allocated from:
      #0 0x7ff1a2b5a070 in __interceptor_strdup (/usr/lib/x86_64-linux-gnu/libasan.so.5+0x3b070)
      #1 0x55719aef4814 in build_id_cache__origname util/build-id.c:215
      #2 0x55719af649b6 in print_sdt_events util/parse-events.c:2339
      #3 0x55719af66272 in print_events util/parse-events.c:2542
      #4 0x55719ad1ecaa in cmd_list /home/changbin/work/linux/tools/perf/builtin-list.c:58
      #5 0x55719aec745d in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302
      #6 0x55719aec7d1a in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354
      #7 0x55719aec8184 in run_argv /home/changbin/work/linux/tools/perf/perf.c:398
      #8 0x55719aeca41a in main /home/changbin/work/linux/tools/perf/perf.c:520
      #9 0x7ff1a07ae09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)

Signed-off-by: Changbin Du <changbin.du@gmail.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fixes: 40218daea1db ("perf list: Show SDT and pre-cached events")
Link: http://lkml.kernel.org/r/20190316080556.3075-7-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf config: Fix a memory leak in collect_config()

[ Upstream commit 54569ba4b06d5baedae4614bde33a25a191473ba ]

Detected with gcc's ASan:

  Direct leak of 66 byte(s) in 5 object(s) allocated from:
      #0 0x7ff3b1f32070 in __interceptor_strdup (/usr/lib/x86_64-linux-gnu/libasan.so.5+0x3b070)
      #1 0x560c8761034d in collect_config util/config.c:597
      #2 0x560c8760d9cb in get_value util/config.c:169
      #3 0x560c8760dfd7 in perf_parse_file util/config.c:285
      #4 0x560c8760e0d2 in perf_config_from_file util/config.c:476
      #5 0x560c876108fd in perf_config_set__init util/config.c:661
      #6 0x560c87610c72 in perf_config_set__new util/config.c:709
      #7 0x560c87610d2f in perf_config__init util/config.c:718
      #8 0x560c87610e5d in perf_config util/config.c:730
      #9 0x560c875ddea0 in main /home/changbin/work/linux/tools/perf/perf.c:442
      #10 0x7ff3afb8609a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)

Signed-off-by: Changbin Du <changbin.du@gmail.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Fixes: 20105ca1240c ("perf config: Introduce perf_config_set class")
Link: http://lkml.kernel.org/r/20190316080556.3075-6-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf config: Fix an error in the config template documentation

[ Upstream commit 9b40dff7ba3caaf0d1919f98e136fa3400bd34aa ]

The option 'sort-order' should be 'sort_order'.

Signed-off-by: Changbin Du <changbin.du@gmail.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fixes: 893c5c798be9 ("perf config: Show default report configuration in example and docs")
Link: http://lkml.kernel.org/r/20190316080556.3075-5-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf list: Don't forget to drop the reference to the allocated thread_map

[ Upstream commit 39df730b09774bd860e39ea208a48d15078236cb ]

Detected via gcc's ASan:

  Direct leak of 2048 byte(s) in 64 object(s) allocated from:
    6     #0 0x7f606512e370 in __interceptor_realloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee370)
    7     #1 0x556b0f1d7ddd in thread_map__realloc util/thread_map.c:43
    8     #2 0x556b0f1d84c7 in thread_map__new_by_tid util/thread_map.c:85
    9     #3 0x556b0f0e045e in is_event_supported util/parse-events.c:2250
   10     #4 0x556b0f0e1aa1 in print_hwcache_events util/parse-events.c:2382
   11     #5 0x556b0f0e3231 in print_events util/parse-events.c:2514
   12     #6 0x556b0ee0a66e in cmd_list /home/changbin/work/linux/tools/perf/builtin-list.c:58
   13     #7 0x556b0f01e0ae in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302
   14     #8 0x556b0f01e859 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354
   15     #9 0x556b0f01edc8 in run_argv /home/changbin/work/linux/tools/perf/perf.c:398
   16     #10 0x556b0f01f71f in main /home/changbin/work/linux/tools/perf/perf.c:520
   17     #11 0x7f6062ccf09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)

Signed-off-by: Changbin Du <changbin.du@gmail.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fixes: 89896051f8da ("perf tools: Do not put a variable sized type not at the end of a struct")
Link: http://lkml.kernel.org/r/20190316080556.3075-3-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools/power turbostat: return the exit status of a command

[ Upstream commit 2a95496634a017c19641f26f00907af75b962f01 ]

turbostat failed to return a non-zero exit status even though the
supplied command (turbostat <command>) failed. Currently when turbostat
forks a command it returns zero instead of the actual exit status of the
command. Modify the code to return the exit status.

Signed-off-by: David Arcari <darcari@redhat.com>
Acked-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/mm: Don't leak kernel addresses

[ Upstream commit a3151724437f54076cc10bc02b1c4f0003ae36cd ]

Since commit:

  ad67b74d2469d9b8 ("printk: hash addresses printed with %p")

at boot "____ptrval____" is printed instead of actual addresses:

    found SMP MP-table at [mem 0x000f5cc0-0x000f5ccf] mapped at [(____ptrval____)]

Instead of changing the print to "%px", and leaking a kernel addresses,
just remove the print completely, like in:

  071929dbdd865f77 ("arm64: Stop printing the virtual memory layout").

Signed-off-by: Matteo Croce <mcroce@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: iscsi: flush running unbind operations when removing a session

[ Upstream commit 165aa2bfb42904b1bec4bf2fa257c8c603c14a06 ]

In some cases, the iscsi_remove_session() function is called while an
unbind_work operation is still running.  This may cause a situation where
sysfs objects are removed in an incorrect order, triggering a kernel
warning.

[  605.249442] ------------[ cut here ]------------
[  605.259180] sysfs group 'power' not found for kobject 'target2:0:0'
[  605.321371] WARNING: CPU: 1 PID: 26794 at fs/sysfs/group.c:235 sysfs_remove_group+0x76/0x80
[  605.341266] Modules linked in: dm_service_time target_core_user target_core_pscsi target_core_file target_core_iblock iscsi_target_mod target_core_mod nls_utf8 isofs ppdev bochs_drm nfit ttm libnvdimm drm_kms_helper syscopyarea sysfillrect sysimgblt joydev pcspkr fb_sys_fops drm i2c_piix4 sg parport_pc parport xfs libcrc32c dm_multipath sr_mod sd_mod cdrom ata_generic 8021q garp mrp ata_piix stp crct10dif_pclmul crc32_pclmul llc libata crc32c_intel virtio_net net_failover ghash_clmulni_intel serio_raw failover sunrpc dm_mirror dm_region_hash dm_log dm_mod be2iscsi bnx2i cnic uio cxgb4i cxgb4 libcxgbi libcxgb qla4xxx iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi
[  605.627479] CPU: 1 PID: 26794 Comm: kworker/u32:2 Not tainted 4.18.0-60.el8.x86_64 #1
[  605.721401] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20180724_192412-buildhw-07.phx2.fedoraproject.org-1.fc29 04/01/2014
[  605.823651] Workqueue: scsi_wq_2 __iscsi_unbind_session [scsi_transport_iscsi]
[  605.830940] RIP: 0010:sysfs_remove_group+0x76/0x80
[  605.922907] Code: 48 89 df 5b 5d 41 5c e9 38 c4 ff ff 48 89 df e8 e0 bf ff ff eb cb 49 8b 14 24 48 8b 75 00 48 c7 c7 38 73 cb a7 e8 24 77 d7 ff <0f> 0b 5b 5d 41 5c c3 0f 1f 00 0f 1f 44 00 00 41 56 41 55 41 54 55
[  606.122304] RSP: 0018:ffffbadcc8d1bda8 EFLAGS: 00010286
[  606.218492] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[  606.326381] RDX: ffff98bdfe85eb40 RSI: ffff98bdfe856818 RDI: ffff98bdfe856818
[  606.514498] RBP: ffffffffa7ab73e0 R08: 0000000000000268 R09: 0000000000000007
[  606.529469] R10: 0000000000000000 R11: ffffffffa860d9ad R12: ffff98bdf978e838
[  606.630535] R13: ffff98bdc2cd4010 R14: ffff98bdc2cd3ff0 R15: ffff98bdc2cd4000
[  606.824707] FS:  0000000000000000(0000) GS:ffff98bdfe840000(0000) knlGS:0000000000000000
[  607.018333] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  607.117844] CR2: 00007f84b78ac024 CR3: 000000002c00a003 CR4: 00000000003606e0
[  607.117844] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  607.420926] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  607.524236] Call Trace:
[  607.530591]  device_del+0x56/0x350
[  607.624393]  ? ata_tlink_match+0x30/0x30 [libata]
[  607.727805]  ? attribute_container_device_trigger+0xb4/0xf0
[  607.829911]  scsi_target_reap_ref_release+0x39/0x50
[  607.928572]  scsi_remove_target+0x1a2/0x1d0
[  608.017350]  __iscsi_unbind_session+0xb3/0x160 [scsi_transport_iscsi]
[  608.117435]  process_one_work+0x1a7/0x360
[  608.132917]  worker_thread+0x30/0x390
[  608.222900]  ? pwq_unbound_release_workfn+0xd0/0xd0
[  608.323989]  kthread+0x112/0x130
[  608.418318]  ? kthread_bind+0x30/0x30
[  608.513821]  ret_from_fork+0x35/0x40
[  608.613909] ---[ end trace 0b98c310c8a6138c ]---

Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Acked-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

thermal/intel_powerclamp: fix truncated kthread name

[ Upstream commit e925b5be5751f6a7286bbd9a4cbbc4ac90cc5fa6 ]

kthread name only allows 15 characters (TASK_COMMON_LEN is 16).
Thus rename the kthreads created by intel_powerclamp driver from
"kidle_inject/ + decimal cpuid" to "kidle_inj/ + decimal cpuid"
to avoid truncated kthead name for cpu 100 and later.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

thermal/int340x_thermal: fix mode setting

[ Upstream commit 396ee4d0cd52c13b3f6421b8d324d65da5e7e409 ]

int3400 only pushes the UUID into the firmware when the mode is flipped
to "enable". The current code only exposes the mode flag if the firmware
supports the PASSIVE_1 UUID, which not all machines do. Remove the
restriction.

Signed-off-by: Matthew Garrett <mjg59@google.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

thermal/int340x_thermal: Add additional UUIDs

[ Upstream commit 16fc8eca1975358111dbd7ce65e4ce42d1a848fb ]

Add more supported DPTF policies than the driver currently exposes.

Signed-off-by: Matthew Garrett <mjg59@google.com>
Cc: Nisha Aram <nisha.aram@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

thermal: bcm2835: Fix crash in bcm2835_thermal_debugfs

[ Upstream commit 35122495a8c6683e863acf7b05a7036b2be64c7a ]

"cat /sys/kernel/debug/bcm2835_thermal/regset" causes a NULL pointer
dereference in bcm2835_thermal_debugfs. The driver makes use of the
implementation details of the thermal framework to retrieve a pointer
to its private data from a struct thermal_zone_device, and gets it
wrong - leading to the crash. Instead, store its private data as the
drvdata and retrieve the thermal_zone_device pointer from it.

Fixes: bcb7dd9ef206 ("thermal: bcm2835: add thermal driver for bcm2835 SoC")

Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

thermal/intel_powerclamp: fix __percpu declaration of worker_data

[ Upstream commit aa36e3616532f82a920b5ebf4e059fbafae63d88 ]

This variable is declared as:
static struct powerclamp_worker_data * __percpu worker_data;
In other words, a percpu pointer to struct ...

But this variable not used like so but as a pointer to a percpu
struct powerclamp_worker_data.

So fix the declaration as:
static struct powerclamp_worker_data __percpu *worker_data;

This also quiets Sparse's warnings from __verify_pcpu_ptr(), like:
  494:49: warning: incorrect type in initializer (different address spaces)
  494:49:    expected void const [noderef] <asn:3> *__vpp_verify
  494:49:    got struct powerclamp_worker_data *

Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: opl3: fix mismatch between snd_opl3_drum_switch definition and declaration

[ Upstream commit b4748e7ab731e436cf5db4786358ada5dd2db6dd ]

The function snd_opl3_drum_switch declaration in the header file
has the order of the two arguments on_off and vel swapped when
compared to the definition arguments of vel and on_off. Fix this
by swapping them around to match the definition.

This error predates the git history, so no idea when this error
was introduced.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: davinci: remove extraneous __init annotation

[ Upstream commit 9ce58dd7d9da3ca0d7cb8c9568f1c6f4746da65a ]

Building with clang finds a mistaken __init tag:

WARNING: vmlinux.o(.text+0x5e4250): Section mismatch in reference from the function davinci_mmcsd_probe() to the function .init.text:init_mmcsd_host()
The function davinci_mmcsd_probe() references
the function __init init_mmcsd_host().
This is often because davinci_mmcsd_probe lacks a __init
annotation or the annotation of init_mmcsd_host is wrong.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/mlx4: Fix race condition between catas error reset and aliasguid flows

[ Upstream commit 587443e7773e150ae29e643ee8f41a1eed226565 ]

Code review revealed a race condition which could allow the catas error
flow to interrupt the alias guid query post mechanism at random points.
Thiis is fixed by doing cancel_delayed_work_sync() instead of
cancel_delayed_work() during the alias guid mechanism destroy flow.

Fixes: a0c64a17aba8 ("mlx4: Add alias_guid mechanism")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

auxdisplay: hd44780: Fix memory leak on ->remove()

[ Upstream commit 41c8d0adf3c4df1867d98cee4a2c4531352a33ad ]

We have to free on ->remove() the allocated resources on ->probe().

Fixes: d47d88361fee ("auxdisplay: Add HD44780 Character LCD support")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: sb8: add a check for request_region

[ Upstream commit dcd0feac9bab901d5739de51b3f69840851f8919 ]

In case request_region fails, the fix returns an error code to
avoid NULL pointer dereference.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: echoaudio: add a check for ioremap_nocache

[ Upstream commit 6ade657d6125ec3ec07f95fa51e28138aef6208f ]

In case ioremap_nocache fails, the fix releases chip and returns
an error code upstream to avoid NULL pointer dereference.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: report real fs size after failed resize

[ Upstream commit 6c7328400e0488f7d49e19e02290ba343b6811b2 ]

Currently when the file system resize using ext4_resize_fs() fails it
will report into log that "resized filesystem to <requested block
count>". However this may not be true in the case of failure. Use the
current block count as returned by ext4_blocks_count() to report the
block count.

Additionally, report a warning that "error occurred during file system
resize"

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: add missing brelse() in add_new_gdb_meta_bg()

[ Upstream commit d64264d6218e6892edd832dc3a5a5857c2856c53 ]

Currently in add_new_gdb_meta_bg() there is a missing brelse of gdb_bh
in case ext4_journal_get_write_access() fails.
Additionally kvfree() is missing in the same error path. Fix it by
moving the ext4_journal_get_write_access() before the ext4 sb update as
Ted suggested and release n_group_desc and gdb_bh in case it fails.

Fixes: 61a9c11e5e7a ("ext4: add missing brelse() add_new_gdb_meta_bg()'s error path")
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/core: Restore mmap record type correctly

[ Upstream commit d9c1bb2f6a2157b38e8eb63af437cb22701d31ee ]

On mmap(), perf_events generates a RECORD_MMAP record and then checks
which events are interested in this record. There are currently 2
versions of mmap records: RECORD_MMAP and RECORD_MMAP2. MMAP2 is larger.
The event configuration controls which version the user level tool
accepts.

If the event->attr.mmap2=1 field then MMAP2 record is returned. The
perf_event_mmap_output() takes care of this. It checks attr->mmap2 and
corrects the record fields before putting it in the sampling buffer of
the event. At the end the function restores the modified MMAP record
fields.

The problem is that the function restores the size but not the type.
Thus, if a subsequent event only accepts MMAP type, then it would
instead receive an MMAP2 record with a size of MMAP record.

This patch fixes the problem by restoring the record type on exit.

Signed-off-by: Stephane Eranian <eranian@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Fixes: 13d7a2410fa6 ("perf: Add attr->mmap2 attribute to an event")
Link: http://lkml.kernel.org/r/20190307185233.225521-1-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arc: hsdk_defconfig: Enable CONFIG_BLK_DEV_RAM

[ Upstream commit 0728aeb7ead99a9b0dac2f3c92b3752b4e02ff97 ]

We have now a HSDK device in our kernelci lab, but kernel builded via
the hsdk_defconfig lacks ramfs supports, so it cannot boot kernelci jobs
yet.

So this patch enable CONFIG_BLK_DEV_RAM in hsdk_defconfig.

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARC: u-boot args: check that magic number is correct

[ Upstream commit edb64bca50cd736c6894cc6081d5263c007ce005 ]

In case of devboards we really often disable bootloader and load
Linux image in memory via JTAG. Even if kernel tries to verify
uboot_tag and uboot_arg there is sill a chance that we treat some
garbage in registers as valid u-boot arguments in JTAG case.
E.g. it is enough to have '1' in r0 to treat any value in r2 as
a boot command line.

So check that magic number passed from u-boot is correct and drop
u-boot arguments otherwise. That helps to reduce the possibility
of using garbage as u-boot arguments in JTAG case.

We can safely check U-boot magic value (0x0) in linux passed via
r1 register as U-boot pass it from the beginning. So there is no
backward-compatibility issues.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 4.14.112

arm64: dts: rockchip: Fix vcc_host1_5v GPIO polarity on rk3328-rock64

commit a8772e5d826d0f61f8aa9c284b3ab49035d5273d upstream.

This patch makes USB ports functioning again.

Fixes: 955bebde057e ("arm64: dts: rockchip: add rk3328-rock64 board")
Cc: stable@vger.kernel.org
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Tomohiro Mayama <parly-gh@iris.mystia.org>
Tested-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: rockchip: fix vcc_host1_5v pin assign on rk3328-rock64

commit ef05bcb60c1a8841e38c91923ba998181117a87c upstream.

This patch fixes pin assign of vcc_host1_5v. This regulator is
controlled by USB20_HOST_DRV signal.

ROCK64 schematic says that GPIO0_A2 pin is used as USB20_HOST_DRV.
GPIO0_D3 pin is for SPDIF_TX_M0.

Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm table: propagate BDI_CAP_STABLE_WRITES to fix sporadic checksum errors

commit eb40c0acdc342b815d4d03ae6abb09e80c0f2988 upstream.

Some devices don't use blk_integrity but still want stable pages
because they do their own checksumming. Examples include rbd and iSCSI
when data digests are negotiated. Stacking DM (and thus LVM) on top of
these devices results in sporadic checksum errors.

Set BDI_CAP_STABLE_WRITES if any underlying device has it set.

Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Add function 1 DMA alias quirk for Marvell 9170 SATA controller

commit 9cde402a59770a0669d895399c13407f63d7d209 upstream.

There is a Marvell 88SE9170 PCIe SATA controller I found on a board here.
Some quick testing with the ARM SMMU enabled reveals that it suffers from
the same requester ID mixup problems as the other Marvell chips listed
already.

Add the PCI vendor/device ID to the list of chips which need the
workaround.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/perf/amd: Remove need to check "running" bit in NMI handler

commit 3966c3feca3fd10b2935caa0b4a08c7dd59469e5 upstream.

Spurious interrupt support was added to perf in the following commit, almost
a decade ago:

63e6be6d98e1 ("perf, x86: Catch spurious interrupts after disabling counters")

The two previous patches (resolving the race condition when disabling a
PMC and NMI latency mitigation) allow for the removal of this older
spurious interrupt support.

Currently in x86_pmu_stop(), the bit for the PMC in the active_mask bitmap
is cleared before disabling the PMC, which sets up a race condition. This
race condition was mitigated by introducing the running bitmap. That race
condition can be eliminated by first disabling the PMC, waiting for PMC
reset on overflow and then clearing the bit for the PMC in the active_mask
bitmap. The NMI handler will not re-enable a disabled counter.

If x86_pmu_stop() is called from the perf NMI handler, the NMI latency
mitigation support will guard against any unhandled NMI messages.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org> # 4.14.x-
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lkml.kernel.org/r/Message-ID:
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/perf/amd: Resolve NMI latency issues for active PMCs

commit 6d3edaae16c6c7d238360f2841212c2b26774d5e upstream.

On AMD processors, the detection of an overflowed PMC counter in the NMI
handler relies on the current value of the PMC. So, for example, to check
for overflow on a 48-bit counter, bit 47 is checked to see if it is 1 (not
overflowed) or 0 (overflowed).

When the perf NMI handler executes it does not know in advance which PMC
counters have overflowed. As such, the NMI handler will process all active
PMC counters that have overflowed. NMI latency in newer AMD processors can
result in multiple overflowed PMC counters being processed in one NMI and
then a subsequent NMI, that does not appear to be a back-to-back NMI, not
finding any PMC counters that have overflowed. This may appear to be an
unhandled NMI resulting in either a panic or a series of messages,
depending on how the kernel was configured.

To mitigate this issue, add an AMD handle_irq callback function,
amd_pmu_handle_irq(), that will invoke the common x86_pmu_handle_irq()
function and upon return perform some additional processing that will
indicate if the NMI has been handled or would have been handled had an
earlier NMI not handled the overflowed PMC. Using a per-CPU variable, a
minimum value of the number of active PMCs or 2 will be set whenever a
PMC is active. This is used to indicate the possible number of NMIs that
can still occur. The value of 2 is used for when an NMI does not arrive
at the LAPIC in time to be collapsed into an already pending NMI. Each
time the function is called without having handled an overflowed counter,
the per-CPU value is checked. If the value is non-zero, it is decremented
and the NMI indicates that it handled the NMI. If the value is zero, then
the NMI indicates that it did not handle the NMI.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org> # 4.14.x-
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lkml.kernel.org/r/Message-ID:
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/perf/amd: Resolve race condition when disabling PMC

commit 914123fa39042e651d79eaf86bbf63a1b938dddf upstream.

On AMD processors, the detection of an overflowed counter in the NMI
handler relies on the current value of the counter. So, for example, to
check for overflow on a 48 bit counter, bit 47 is checked to see if it
is 1 (not overflowed) or 0 (overflowed).

There is currently a race condition present when disabling and then
updating the PMC. Increased NMI latency in newer AMD processors makes this
race condition more pronounced. If the counter value has overflowed, it is
possible to update the PMC value before the NMI handler can run. The
updated PMC value is not an overflowed value, so when the perf NMI handler
does run, it will not find an overflowed counter. This may appear as an
unknown NMI resulting in either a panic or a series of messages, depending
on how the kernel is configured.

To eliminate this race condition, the PMC value must be checked after
disabling the counter. Add an AMD function, amd_pmu_disable_all(), that
will wait for the NMI handler to reset any active and overflowed counter
after calling x86_pmu_disable_all().

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org> # 4.14.x-
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lkml.kernel.org/r/Message-ID:
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xtensa: fix return_address

commit ada770b1e74a77fff2d5f539bf6c42c25f4784db upstream.

return_address returns the address that is one level higher in the call
stack than requested in its argument, because level 0 corresponds to its
caller's return address. Use requested level as the number of stack
frames to skip.

This fixes the address reported by might_sleep and friends.

Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched/fair: Do not re-read ->h_load_next during hierarchical load calculation

commit 0e9f02450da07fc7b1346c8c32c771555173e397 upstream.

A NULL pointer dereference bug was reported on a distribution kernel but
the same issue should be present on mainline kernel. It occured on s390
but should not be arch-specific.  A partial oops looks like:

  Unable to handle kernel pointer dereference in virtual kernel address space
  ...
  Call Trace:
    ...
    try_to_wake_up+0xfc/0x450
    vhost_poll_wakeup+0x3a/0x50 [vhost]
    __wake_up_common+0xbc/0x178
    __wake_up_common_lock+0x9e/0x160
    __wake_up_sync_key+0x4e/0x60
    sock_def_readable+0x5e/0x98

The bug hits any time between 1 hour to 3 days. The dereference occurs
in update_cfs_rq_h_load when accumulating h_load. The problem is that
cfq_rq->h_load_next is not protected by any locking and can be updated
by parallel calls to task_h_load. Depending on the compiler, code may be
generated that re-reads cfq_rq->h_load_next after the check for NULL and
then oops when reading se->avg.load_avg. The dissassembly showed that it
was possible to reread h_load_next after the check for NULL.

While this does not appear to be an issue for later compilers, it's still
an accident if the correct code is generated. Full locking in this path
would have high overhead so this patch uses READ_ONCE to read h_load_next
only once and check for NULL before dereferencing. It was confirmed that
there were no further oops after 10 days of testing.

As Peter pointed out, it is also necessary to use WRITE_ONCE() to avoid any
potential problems with store tearing.

Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Fixes: 685207963be9 ("sched: Move h_load calculation to task_h_load()")
Link: https://lkml.kernel.org/r/20190319123610.nsivgf3mjbjjesxb@techsingularity.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen: Prevent buffer overflow in privcmd ioctl

commit 42d8644bd77dd2d747e004e367cb0c895a606f39 upstream.

The "call" variable comes from the user in privcmd_ioctl_hypercall().
It's an offset into the hypercall_page[] which has (PAGE_SIZE / 32)
elements. We need to put an upper bound on it to prevent an out of
bounds access.

Cc: stable@vger.kernel.org
Fixes: 1246ae0bb992 ("xen: add variable hypercall caller")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: backtrace: Don't bother trying to unwind the userspace stack

commit 1e6f5440a6814d28c32d347f338bfef68bc3e69d upstream.

Calling dump_backtrace() with a pt_regs argument corresponding to
userspace doesn't make any sense and our unwinder will simply print
"Call trace:" before unwinding the stack looking for user frames.

Rather than go through this song and dance, just return early if we're
passed a user register state.

Cc: <stable@vger.kernel.org>
Fixes: 1149aad10b1e ("arm64: Add dump_backtrace() in show_regs")
Reported-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>