i386: fix section mismatch warnings in mtrr

Following section mismatch warnings were reported by Andrey Borzenkov:

WARNING: arch/i386/kernel/built-in.o - Section mismatch: reference to .init.text:amd_init_mtrr from .text between 'mtrr_bp_init' (at offset 0x967a) and 'mtrr_attrib_to_str'
WARNING: arch/i386/kernel/built-in.o - Section mismatch: reference to .init.text:cyrix_init_mtrr from .text between 'mtrr_bp_init' (at offset 0x967f) and 'mtrr_attrib_to_str'
WARNING: arch/i386/kernel/built-in.o - Section mismatch: reference to .init.text:centaur_init_mtrr from .text between 'mtrr_bp_init' (at offset 0x9684) and 'mtrr_attrib_to_str'
WARNING: arch/i386/kernel/built-in.o - Section mismatch: reference to .init.text: from .text between 'get_mtrr_state' (at offset 0xa735) and 'generic_get_mtrr'
WARNING: arch/i386/kernel/built-in.o - Section mismatch: reference to .init.text: from .text between 'get_mtrr_state' (at offset 0xa749) and 'generic_get_mtrr'
WARNING: arch/i386/kernel/built-in.o - Section mismatch: reference to .init.text: from .text between 'get_mtrr_state' (at offset 0xa770) and 'generic_get_mtrr'

It was tracked down to a few functions missing __init tag.
Compile tested only.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

i386: fix machine rebooting

Commit 59f4e7d572980a521b7bdba74ab71b21f5995538 fixed machine rebooting
on Truxton's machine (when no keyboard was present).  But it broke it on
Lee's machine.

The patch reinstates the old (pre-59f4e7d572980a521b7bdba74ab71b21f5995538)
code and if that doesn't work out, try the new,
post-59f4e7d572980a521b7bdba74ab71b21f5995538 code instead.

Cc: Lee Garrett <lee-in-berlin@web.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86_64: mcelog tolerant level cleanup

Background:
 The MCE handler has several paths that it can take, depending on various
 conditions of the MCE status and the value of the 'tolerant' knob.  The
 exact semantics are not well defined and the code is a bit twisty.

Description:
 This patch makes the MCE handler's behavior more clear by documenting the
 behavior for various 'tolerant' levels.  It also fixes or enhances
 several small things in the handler.  Specifically:
     * If RIPV is set it is not safe to restart, so set the 'no way out'
       flag rather than the 'kill it' flag.
     * Don't panic() on correctable MCEs.
     * If the _OVER bit is set *and* the _UC bit is set (meaning possibly
       dropped uncorrected errors), set the 'no way out' flag.
     * Use EIPV for testing whether an app can be killed (SIGBUS) rather
       than RIPV.  According to docs, EIPV indicates that the error is
       related to the IP, while RIPV simply means the IP is valid to
       restart from.
     * Don't clear the MCi_STATUS registers until after the panic() path.
       This leaves the status bits set after the panic() so clever BIOSes
       can find them (and dumb BIOSes can do nothing).

 This patch also calls nonseekable_open() in mce_open (as suggested by akpm).

Result:
 Tolerant levels behave almost identically to how they always have, but
 not it's well defined.  There's a slightly higher chance of panic()ing
 when multiple errors happen (a good thing, IMHO).  If you take an MBE and
 panic(), the error status bits are not cleared.

Alternatives:
 None.

Testing:
 I used software to inject correctable and uncorrectable errors.  With
 tolerant = 3, the system usually survives.  With tolerant = 2, the system
 usually panic()s (PCC) but not always.  With tolerant = 1, the system
 always panic()s.  When the system panic()s, the BIOS is able to detect
 that the cause of death was an MC4.  I was not able to reproduce the
 case of a non-PCC error in userspace, with EIPV, with (tolerant < 3).
 That will be rare at best.

Signed-off-by: Tim Hockin <thockin@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86_64: support poll() on /dev/mcelog

Background:
 /dev/mcelog is typically polled manually.  This is less than optimal for
 situations where accurate accounting of MCEs is important.  Calling
 poll() on /dev/mcelog does not work.

Description:
 This patch adds support for poll() to /dev/mcelog.  This results in
 immediate wakeup of user apps whenever the poller finds MCEs.  Because
 the exception handler can not take any locks, it can not call the wakeup
 itself.  Instead, it uses a thread_info flag (TIF_MCE_NOTIFY) which is
 caught at the next return from interrupt or exit from idle, calling the
 mce_user_notify() routine.  This patch also disables the "fake panic"
 path of the mce_panic(), because it results in printk()s in the exception
 handler and crashy systems.

 This patch also does some small cleanup for essentially unused variables,
 and moves the user notification into the body of the poller, so it is
 only called once per poll, rather than once per CPU.

Result:
 Applications can now poll() on /dev/mcelog.  When an error is logged
 (whether through the poller or through an exception) the applications are
 woken up promptly.  This should not affect any previous behaviors.  If no
 MCEs are being logged, there is no overhead.

Alternatives:
 I considered simply supporting poll() through the poller and not using
 TIF_MCE_NOTIFY at all.  However, the time between an uncorrectable error
 happening and the user application being notified is *the*most* critical
 window for us.  Many uncorrectable errors can be logged to the network if
 given a chance.

 I also considered doing the MCE poll directly from the idle notifier, but
 decided that was overkill.

Testing:
 I used an error-injecting DIMM to create lots of correctable DRAM errors
 and verified that my user app is woken up in sync with the polling interval.
 I also used the northbridge to inject uncorrectable ECC errors, and
 verified (printk() to the rescue) that the notify routine is called and the
 user app does wake up.  I built with PREEMPT on and off, and verified
 that my machine survives MCEs.

[wli@holomorphy.com: build fix]
Signed-off-by: Tim Hockin <thockin@google.com>
Signed-off-by: William Irwin <bill.irwin@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86_64: O_EXCL on /dev/mcelog

Background:
 /dev/mcelog is a clear-on-read interface.  It is currently possible for
 multiple users to open and read() the device.  Users are protected from
 each other during any one read, but not across reads.

Description:
 This patch adds support for O_EXCL to /dev/mcelog.  If a user opens the
 device with O_EXCL, no other user may open the device (EBUSY).  Likewise,
 any user that tries to open the device with O_EXCL while another user has
 the device will fail (EBUSY).

Result:
 Applications can get exclusive access to /dev/mcelog.  Applications that
 do not care will be unchanged.

Alternatives:
 A simpler choice would be to only allow one open() at all, regardless of
 O_EXCL.

Testing:
 I wrote an application that opens /dev/mcelog with O_EXCL and observed
 that any other app that tried to open /dev/mcelog would fail until the
 exclusive app had closed the device.

Caveats:
 None.

Signed-off-by: Tim Hockin <thockin@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

i386: insert unclaimed MMCONFIG resources

Insert the unclaimed MMCONFIG resources into the resource tree without the
IORESOURCE_BUSY flag during late initialization.  This allows the MMCONFIG
regions to be visible in the iomem resource tree without interfering with
other system resources that were discovered during PCI initialization.

[akpm@linux-foundation.org: nanofixes]
Signed-off-by: Aaron Durbin <adurbin@google.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86_64: fake apicid_to_node mapping for fake numa

When we are in the emulated NUMA case, we need to make sure that all existing
apicid_to_node mappings that point to real node ID's now point to the
equivalent fake node ID's.

If we simply iterate over all apicid_to_node[] members for each node, we risk
remapping an entry if it shares a node ID with a real node.  Since apicid's
may not be consecutive, we're forced to create an automatic array of
apicid_to_node mappings and then copy it over once we have finished remapping
fake to real nodes.

Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86_64: fake pxm-to-node mapping for fake numa

For NUMA emulation, our SLIT should represent the true NUMA topology of the
system but our proximity domain to node ID mapping needs to reflect the
emulated state.

When NUMA emulation has successfully setup fake nodes on the system, a new
function, acpi_fake_nodes() is called.  This function determines the proximity
domain (_PXM) for each true node found on the system.  It then finds which
emulated nodes have been allocated on this true node as determined by its
starting address.  The node ID to PXM mapping is changed so that each fake
node ID points to the PXM of the true node that it is located on.

If the machine failed to register a SLIT, then we assume there is no special
requirement for emulated node affinity so we use the default LOCAL_DISTANCE,
which is newly exported to this code, as our measurement if the emulated nodes
appear in the same PXM.  Otherwise, we use REMOTE_DISTANCE.

PXM_INVAL and NID_INVAL are also exported to the ACPI header file so that we
can compare node_to_pxm() results in generic code (in this case, the SRAT
code).

Cc: Len Brown <lenb@kernel.org>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86_64: extract helper function from e820_register_active_regions

The logic in e820_find_active_regions() for determining the true active
regions for an e820 entry given a range of PFN's is needed for
e820_hole_size() as well.

e820_hole_size() is called from the NUMA emulation code to determine the
reserved area within an address range on a per-node basis.  Its logic should
duplicate that of finding active regions in an e820 entry because these are
the only true ranges we may register anyway.

[akpm@linux-foundation.org: cleanup]
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86_64: Quicklist support for x86_64

This adds caching of pgds and puds, pmds, pte.  That way we can avoid costly
zeroing and initialization of special mappings in the pgd.

A second quicklist is useful to separate out PGD handling.  We can carry the
initialized pgds over to the next process needing them.

Also clean up the pgd_list handling to use regular list macros.  There is no
need anymore to avoid the lru field.

Move the add/removal of the pgds to the pgdlist into the constructor /
destructor.  That way the implementation is congruent with i386.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "Luck, Tony" <tony.luck@intel.com>
Acked-by: William Lee Irwin III <wli@holomorphy.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

i386: timer_irq_works() static again

timer_irq_works() needlessly became global.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

i386: arch/i386/kernel/i8253.c should #include <asm/timer.h>

Every file should include the headers containing the prototypes for its
global functions.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

i386: remapped_pgdat_init() static

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

i386: minor nx handling adjustment

Constrain __supported_pte_mask and NX handling to just the PAE kernel.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

i386: smp-alt-once option is only useful with HOTPLUG_CPU

Hence remove its handling in the opposite case.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86_64: remove unused variable maxcpus

.. and adjust documentation to properly reflect options that are
x86-64 specific.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86_64: minor exception trace variables cleanup

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

i386: allow debuggers to access the vsyscall page with compat vDSO

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86_64: ia32entry adjustments

Consolidate the three 32-bit system call entry points so that they all
treat registers in similar ways.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86_64: Avoid too many remote cpu references due to /proc/stat

Too many remote cpu references due to /proc/stat.

On x86_64, with newer kernel versions, kstat_irqs is a bit of a problem.
On every call to kstat_irqs, the process brings in per-cpu data from all
online cpus.  Doing this for NR_IRQS, which is now 256 + 32 * NR_CPUS
results in (256+32*63) * 63 remote cpu references on a 64 cpu config.
/proc/stat is parsed by common commands like top, who etc, causing lots
of cacheline transfers

This statistic seems useless.  Other 'big iron' arches disable this.

AK: changed to remove for all SMP setups
AK: add comment

Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86_64: time.c white space wreckage cleanup

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86_64: apic.c coding style janitor work

Fix coding style, white space wreckage and remove unused code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86: share hpet.h with i386

hpet.h in asm-i386 and asm-x86_64 contain tons of duplicated stuff.
Consolidate into one shared header file.

AK: Fix i386 compilation with !X86_IO_APIC

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86_64: fiuxp pt_reqs leftovers

The hpet_rtc_interrupt handler still uses pt_regs. Fix it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86_64: Fix APIC typo

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86_64: Remove dead code and other janitor work in tsc.c

Remove unused code and variables and do some codingstyle / whitespace
cleanups while at it.

Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86_64: Use generic xtime init

xtime can be initialized including the cmos update from the generic
timekeeping code. Remove the arch specific implementation.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86_64: use generic cmos update

Use the generic cmos update function in kernel/time/ntp.c

Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86_64: Untangle asm/hpet.h from asm/timex.h

When making changes to x86_64 timers, I noticed that touching hpet.h triggered
an unreasonably large rebuild.  Untangling it from timex.h quiets the extra
rebuild quite a bit.

Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

i386: remove pit_interrupt_hook

Remove pit_interrupt_hook as it adds just an extra layer.

Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86_64: hpet tsc calibration fix broken smi detection logic

The current SMI detection logic in read_hpet_tsc() makes sure,
that when a SMI happens between the read of the HPET counter and
the read of the TSC, this wrong value is used for TSC calibration.

This is not the intention of the function. The comparison must ensure,
that we do _NOT_ use such a value.

Fix the check to use calibration values where delta of the two TSC reads
is smaller than a reasonable threshold.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

i386: Reserve the right performance counter for the Intel PerfMon NMI watchdog

The Intel PerfMon NMI watchdog reserves the first performance counter,
but uses the second one. Make it correctly reserve the second one.

Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86_64: Don't use softirq safe locks in smp_call_function

It is not fully softirq safe anyways.

Can't do a WARN_ON unfortunately because it could trigger in the
panic case.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86_64: remove extra extern declaring about dmi_ioremap

Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

i386: Add L3 cache support to AMD CPUID4 emulation

With that an L3 cache is correctly reported in the cache information in /sys

With fixes from Andreas Herrmann and Dean Gaudet and Joachim Deguara

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86_64: Add vDSO for x86-64 with gettimeofday/clock_gettime/getcpu

This implements new vDSO for x86-64.  The concept is similar
to the existing vDSOs on i386 and PPC.  x86-64 has had static
vsyscalls before,  but these are not flexible enough anymore.

A vDSO is a ELF shared library supplied by the kernel that is mapped into
user address space.  The vDSO mapping is randomized for each process
for security reasons.

Doing this was needed for clock_gettime, because clock_gettime
always needs a syscall fallback and having one at a fixed
address would have made buffer overflow exploits too easy to write.

The vdso can be disabled with vdso=0

It currently includes a new gettimeofday implemention and optimized
clock_gettime(). The gettimeofday implementation is slightly faster
than the one in the old vsyscall.  clock_gettime is significantly faster
than the syscall for CLOCK_MONOTONIC and CLOCK_REALTIME.

The new calls are generally faster than the old vsyscall.

Advantages over the old x86-64 vsyscalls:
- Extensible
- Randomized
- Cleaner
- Easier to virtualize (the old static address range previously causes
overhead e.g. for Xen because it has to create special page tables for it)

Weak points:
- glibc support still to be written

The VM interface is partly based on Ingo Molnar's i386 version.

Includes compile fix from Joachim Deguara

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86: Support __attribute__((__cold__)) in gcc 4.3

gcc 4.3 supports a new __attribute__((__cold__)) to mark functions cold. Any
path directly leading to a call of this function will be unlikely. And gcc
will try to generate smaller code for the function itself.

Please use with care. The code generation advantage isn't large and in most
cases it is not worth uglifying code with this.

This patch marks some common error functions like panic(), printk()
as cold.  This will longer term make many unlikely()s unnecessary, although
we can keep them for now for older compilers.

BUG is not marked cold because there is currently no way to tell
gcc to mark a inline function told.

Also all __init and __exit functions are marked cold. With a non -Os
build this will tell the compiler to generate slightly smaller code
for them. I think it currently only uses less alignments for labels,
but that might change in the future.

One disadvantage over *likely() is that they cannot be easily instrumented
to verify them.

Another drawback is that only the latest gcc 4.3 snapshots support this.
Unfortunately we cannot detect this using the preprocessor. This means older
snapshots will fail now. I don't think that's a problem because they are
unreleased compilers that nobody should be using.

gcc also has a __hot__ attribute, but I don't see any sense in using
this in the kernel right now. But someday I hope gcc will be able
to use more aggressive optimizing for hot functions even in -Os,
if that happens it should be added.

Includes compile fix from Thomas Gleixner.

Cc: Jan Hubicka <jh@suse.cz>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

i386: Move all simple string operations out of line

The compiler generally generates reasonable inline code for the simple
cases and for the rest it's better for code size for them to be out of line.
Also there they can be potentially optimized more in the future.

In fact they probably should be in a .S file because they're all pure
assembly, but that's for another day.

Also some code style cleanup on them while I was on it (this seems
to be the last untouched really early Linux code)

This saves ~12k text for a defconfig kernel with gcc 4.1.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86_64: Always use builtin memcpy on gcc 4.3

Jan asked to always use the builtin memcpy on gcc 4.3 mainline because
it should generate better code than the old macro. Let's try it.

Cc: Jan Hubicka <jh@suse.cz>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86_64: Use string instruction memcpy/memset on AMD Fam10

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86_64: various cleanups in NUMA scan node

In acpi_scan_nodes(), we immediately return -1 if acpi_numa <= 0, meaning
we haven't detected any underlying ACPI topology or we have explicitly
disabled its use from the command-line with numa=noacpi.

acpi_table_print_srat_entry() and acpi_table_parse_srat() are only
referenced within drivers/acpi/numa.c, so we can mark them as static and
remove their prototypes from the header file.

Likewise, pxm_to_node_map[] and node_to_pxm_map[] are only used within
drivers/acpi/numa.c, so we mark them as static and remove their externs
from the header file.

The automatic 'result' variable is unused in acpi_numa_init(), so it's
removed.

Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86_64: Use LOCAL_DISTANCE and REMOTE_DISTANCE in x86_64 ACPI code

Use LOCAL_DISTANCE and  REMOTE_DISTANCE in x86_64 ACPI code

Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86_64: Report the pending irq if available in smp_affinity

Otherwise smp_affinity would only update after the next interrupt
on x86 systems.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86_64: Don't rely on a unique IO-APIC ID

Linux 64bit only uses the IO-APIC ID as an internal cookie. In the future
there could be some cases where the IO-APIC IDs are not unique because
they share an 8 bit space with CPUs and if there are enough CPUs
it is difficult to get them that. But Linux needs the io apic ID
internally for its data structures. Assign unique IO APIC ids on
table parsing.

TBD do for 32bit too

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86_64: asm/ptrace.h needs linux/compiler.h

On x86_64, <asm/ptrace.h> uses __user but doesn't include
<linux/compiler.h>.  This could lead to build failures.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86: Always flush pages in change_page_attr

Fix a bug introduced with the CLFLUSH changes: we must always flush pages
changed in cpa(), not just when they are reverted.

Reenable CLFLUSH usage with that now (it was temporarily disabled
for .22)

Add some BUG_ONs

Contains fixes from  Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

i386: Update defconfig

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86_64: Update defconfig

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

atmel_lcdfb: use spare bits in 32bpp mode as alpha channel

Set var->transp.offset and var->transp.length in 32bpp mode to indicate
that the 8 otherwise unused bits can be used for transparency.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@rfo.atmel.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rivafb_setup() must be __devinit

WARNING: drivers/built-in.o(.text+0x57106): Section mismatch: reference to .init.text:rivafb_setup (between 'rivafb_init' and 'nv3Busy')

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

atmel_lcdfb: Fix STN LCD support

Fixes STN LCD support for the atmel_lcdfb framebuffer driver.

This patch is the result of a work from Jan Altenberg and has
been tested on a Hitachi SP06Q002 on at91sam9261ek.

It adds a Kconfig switch that enables the proper LCD in the
board configuration file (STN or TFT). The switch is used
in arch/arm/mach-at91/at91sam9261_devices.c & board-sam9261ek.c
as an example.

This patch includes the "Fix wrong line_length calculation"
little one from Jan and Haavard (submitted earlier).

AT91 platform informations are directly submitted trough
the at91 maintainer, here :
http://article.gmane.org/gmane.linux.kernel/543158

Signed-off-by: Nicolas Ferre <nicolas.ferre@rfo.atmel.com>
Cc: "Antonino A. Daplas" <adaplas@gmail.com>
Cc: Jan Altenberg <jan.altenberg@linutronix.de>
Cc: Patrice Vilchez <patrice.vilchez@rfo.atmel.com>
Cc: Andrew Victor <andrew@sanpeople.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: add support for STK17TA8 chip

This patch adds support for the Simtek STK17TA8 timekeeping chip.

The STK17TA8 is quite similar to the DS1553, but differs in register layout
and in various control bits in the registers.  I chose to make this a new
driver to avoid confusion in the code and to not get lost in #ifdefs.

Signed-off-by: Thomas Hommel <thomas.hommel@gefanuc.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: update and use the MAX6900 century byte

We now read and write the century byte in the max6900 chip.  We probably
don't need to do so on Linux-only system, but it's necessary when the chip
is shared by another OS that uses the century byte.

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc kconfig: point out need for static linkage

Various people have expressed surprise that their modular RTC drivers don't
seem to work for initializing the system time at boot.  To help avoid such
unpleasantness, make the Kconfig text point out that the driver probably
needs to be statically linked.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: do not return void value

This patch fixes these sparse warnings:

drivers/rtc/rtc-ds1742.c:265:2: warning: returning void-valued expression
drivers/rtc/rtc-ds1553.c:409:2: warning: returning void-valued expression

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: David Brownell <david-b@pacbell.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use menuconfig objects: ISDN/Gigaset

Change Kconfig objects from "menu, config" into "menuconfig" so that the user
can disable the whole feature without having to enter the menu first.

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Cc: Tilman Schmidt <tilman@imap.cc>
Acked-by: Karsten Keil <kkeil@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use menuconfig objects: ISDN

Unclutter the ISDN menu a tiny bit by moving ISDN4Linux and the CAPI2.0
layers into their own menu.

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Cc: Tilman Schmidt <tilman@imap.cc>
Acked-by: Karsten Keil <kkeil@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use menuconfig objects - CONFIG_ISDN_I4L

Remove a menu statement and several dependencies from the Kconfig files in
the drivers/isdn tree as they have become unnecessary by the transformation
of CONFIG_ISDN from "menu, config" into "menuconfig".
(Modified version of a patch originally proposed by Jan Engelhardt.)

Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Cc: Jan Engelhardt <jengelh@computergmbh.de>
Acked-by: Karsten Keil <kkeil@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

spi.c:scan_boardinfo() mustn't be __init_or_module

WARNING: drivers/built-in.o(.text+0x889735): Section mismatch: reference to .init.text:scan_boardinfo (between 'spi_register_master' and '__unregister')

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

spufs: make signal-notification files readonly for NOSCHED contexts

Reading from the signal{1,2} files requires a spu_acquire_saved, so make these
files write-only for contexts created with SPU_CREATE_NOSCHED.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ps3fb: Set FBINFO_READS_FAST to speed up text console scrolling

ps3fb: Set FBINFO_READS_FAST to speed up text console scrolling (on average
50%, according to my tests)

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: Geoff Levand <geoffrey.levand@am.sony.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ps3fb: Shrink default virtual frame buffer size from 18 to 9 MiB

ps3fb: Shrink the default virtual frame buffer size from 18 to 9 MiB, as
nobody really uses the double buffering feature and Linux can use an
additional 9 MiB.  It can still be overridden on the kernel command line using
`ps3fb=18M'.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: Geoff Levand <geoffrey.levand@am.sony.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ps3fb: Enable VT_HW_CONSOLE_BINDING for proper kexec

ps3fb: VT_HW_CONSOLE_BINDING must be enabled to make console unbinding work,
which is needed to give up all hypervisor resources before reboot or kexec.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: Geoff Levand <geoffrey.levand@am.sony.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

PS3: Fix build with 32-bit toolchains

The PS3 bootwrapper files use instructions only available on 64-bit CPUs.
Add the code generation directive '.machine "ppc64"' for toolchains
configured for 32-bit CPUs.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ps3: FLASH ROM Storage Driver

Add a FLASH ROM Storage Driver for the PS3:
  - Implemented as a misc character device driver
  - Uses a fixed 256 KiB buffer allocated from boot memory as the hypervisor
    requires the writing of aligned 256 KiB blocks

Cc: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ps3: BD/DVD/CD-ROM Storage Driver

Add a BD/DVD/CD-ROM Storage Driver for the PS3:
  - Implemented as a SCSI device driver
  - Uses software scatter-gather with a 64 KiB bounce buffer as the hypervisor
    doesn't support scatter-gather

Cc: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ps3: Disk Storage Driver

Add a Disk Storage Driver for the PS3:
  - Implemented as a block device driver with a dynamic major
  - Disk names (and partitions) are of the format ps3d%c(%u)
  - Uses software scatter-gather with a 64 KiB bounce buffer as the hypervisor
    doesn't support scatter-gather

Cc: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

powerpc: tlb_32.c build fix

allnoconfig results in this:

 CC      arch/powerpc/mm/tlb_32.o
In file included from include/asm/tlb.h:60,
                 from arch/powerpc/mm/tlb_32.c:30:
include/asm-generic/tlb.h: In function 'tlb_flush_mmu':
include/asm-generic/tlb.h:76: error: implicit declaration of function 'release_pages'
include/asm-generic/tlb.h: In function 'tlb_remove_page':
include/asm-generic/tlb.h:105: error: implicit declaration of function 'page_cache_release'

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Documentation:reference notifiers.txt in freezing-of-tasks.txt

freezing-of-tasks.txt mentions firmware issues without mentioning the use
of the new notifier API to overcome them.  Here's an update.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Nigel Cunningham <nigel@nigel.suspend2.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

slob: reduce list scanning

The version of SLOB in -mm always scans its free list from the beginning,
which results in small allocations and free segments clustering at the
beginning of the list over time.  This causes the average search to scan
over a large stretch at the beginning on each allocation.

By starting each page search where the last one left off, we evenly
distribute the allocations and greatly shorten the average search.

Without this patch, kernel compiles on a 1.5G machine take a large amount
of system time for list scanning.  With this patch, compiles are within a
few seconds of performance of a SLAB kernel with no notable change in
system time.

Signed-off-by: Matt Mackall <mpm@selenic.com>
Cc: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

remove handle_mm_fault export

Now that arch/powerpc/platforms/cell/spufs/fault.c is always built in
the kernel there is no need to export handle_mm_fault anymore.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

i386: intel_cacheinfo.c:find_num_cache_leaves() should be __cpuinit

WARNING: arch/i386/kernel/built-in.o(.text+0xb6a7): Section mismatch: reference to .init.text:find_num_cache_leaves (between 'init_intel_cacheinfo' and 'cache_shared_cpu_map_setup')

It could be __init_refok, but gcc >= 4.0 anyway inlines it into the
__cpuinit init_intel_cacheinfo(), and IMHO it's too small for "noinline
__init".

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

i386: PIT stop only, when in periodic or oneshot mode

The patch is necessary on one of my boxen, where programming the stop
sequence twice leads to PIT malfunction.

Sigh !

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andi Kleen <ak@suse.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

NTP: move the cmos update code into ntp.c

i386 and sparc64 have the identical code to update the cmos clock.  Move it
into kernel/time/ntp.c as there are other architectures coming along with the
same requirements.

[akpm@linux-foundation.org: build fixes]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Cc: David Miller <davem@davemloft.net>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hrtimer: speedup hrtimer_enqueue

Speedup hrtimer_enqueue by evaluating the rbtree insertion result.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

highres: improve debug output

Add some more debug information to the hrtimer and clock events code.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tick management: spread timer interrupt

After discussing w/ Thomas over IRC, it seems the issue is the sched tick
fires on every cpu at the same time, causing extra lock contention.

This smaller change, adds an extra offset per cpu so the ticks don't line up.
This patch also drops the idle latency from 40us down to under 20us.

Signed-off-by: john stultz <johnstul@us.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

clockevents: fix device replacement

When a device is replaced by a better rated device, then the broadcast
mode needs to be evaluated again. When the new device has no requirement
for broadcasting, then the broadcast bits for the CPU must be cleared.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

clockevents: fix resume logic

We need to make sure, that the clockevent devices are resumed, before
the tick is resumed. The current resume logic does not guarantee this.

Add CLOCK_EVT_MODE_RESUME and call the set mode functions of the clock
event devices before resuming the tick / oneshot functionality.

Fixup the existing users.

Thanks to Nigel Cunningham for tracking down a long standing thinko,
which affected the jinxed VAIO.

[akpm@linux-foundation.org: xen build fix]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

clockevents: remove prototypes of removed functions

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

revert "PIE randomization"

There are reports of this causing userspace failures
(http://lkml.org/lkml/2007/7/20/421).

Revert.

Cc: Jan Kratochvil <honza@jikos.cz>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland McGrath <roland@redhat.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: Ulrich Kunitz <kune@deine-taler.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Bret Towe" <magnade@gmail.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

console: fix section mismatch warning in vgacon.c

Fix following section mismatch warning:
WARNING: vmlinux.o(.text+0x121e62): Section mismatch: reference to .init.text:__alloc_bootmem (between 'vgacon_startup' and 'vgacon_scrolldelta')

Browsing the code it seems that vgacon_scrollback_startup() is only called
during the init phase so the reference to the .init.text section is OK.

Teach modpost not to warn using ___init_refok.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

knfsd: fix typo in export display, print uid and gid as unsigned

For display purposes, treat uid's and gid's as unsigned ints for now.
Also fix a typo.

Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

i386: touch_nmi_watchdog() in print_trace_address()

Prevent NMI watchdog triggering during long sysrq-T outputs.

Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dm io: fix panic on large request

Flush workqueue before releasing bioset and mopools in dm-crypt.  There can
be finished but not yet released request.

Call chain causing oops:
  run workqueue
    dec_pending
      bio_endio(...);
       <remove device request - remove mempool>
      mempool_free(io, cc->io_pool);

This usually happens when cryptsetup create temporary
luks mapping in the beggining of crypt device activation.

When dm-core calls destructor crypt_dtr, no new request
are possible.

Signed-off-by: Milan Broz <mbroz@redhat.com>
Cc: Chuck Ebbert <cebbert@redhat.com>
Cc: Patrick McHardy <kaber@trash.net>
Acked-by: Alasdair G Kergon <agk@redhat.com>
Cc: Christophe Saout <christophe@saout.de>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

coda: remove CODA_STORE/CODA_RELEASE upcalls

This is an variation on the patch sent by Christoph Hellwig which kills
file_count abuse by the Coda kernel module by moving the coda_flush
functionality into coda_release.  However part of reason we were using the
coda_flush callback was to allow Coda to pass errors that occur during
writeback from the userspace cache manager back to close().

As Al Viro explained on linux-fsdevel, it is impossible to guarantee that
such errors can in fact be returned back to the caller.  There are many
cases where the last reference to a file is not released by the close
system call and it is also impossible to pick some close as a 'last-close'
and delay it until all other references have been destroyed.

The CODA_STORE/CODA_RELEASE upcall combination is clearly a broken design,
and it is better to remove it completely.

Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@ftp.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

nommu: vmalloc_32_user()/vm_insert_page() and symbol exports.

Trying to survive an allmodconfig on a nommu platform results in many
screen lengths of module unhappiness.  Many of the mmap related things that
binfmt_flat hooks in to are never exported despite being global, and there
are also missing definitions for vmalloc_32_user() and vm_insert_page().

I've implemented vmalloc_32_user() trying to stick as close to the
mm/vmalloc.c implementation as possible, though we don't have any need for
VM_USERMAP, so groveling for the VMA can be skipped.  vm_insert_page() has
been stubbed for now in order to keep the build happy.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix swiotlb_sync_single_range()

If the swiotlb maps a multi-slab region, swiotlb_sync_single_range() can be
invoked to sync a sub-region which does not include the first slab.
Unfortunately io_tlb_orig_addr[] is only initialised for the first slab,
and hence the call to sync_single() will read a garbage orig_addr in this
case.

This patch fixes the issue by initialising all mapped slabs in
io_tlb_orig_addr[].  It also correctly adjusts the buffer pointer in
sync_single() to handle the case that the given dma_addr is not aligned on
a slab boundary.

Signed-off-by: Keir Fraser <keir.fraser@cl.cam.ac.uk>
Cc: "Luck, Tony" <tony.luck@intel.com>
Acked-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

UDF: coding style conversion - lindent fixups

This patch fixes up sources after conversion by Lindent.

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Jan Kara <jack@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86_64: wbinvd macro fix

Too many semicolons in this macro.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

KVM: MMU: Fix cleaning up the shadow page allocation cache

__free_page() wants a struct page, not a virtual address.

Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'for-linus' of git://git./linux/kernel/git/drzeus/mmc

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
  sdhci: make sure to clear the error interrupt
  mmc: at91_mci: wakeup on card insertion (or removal)
  mmc: add maintainer for at91

Merge branch 'master' of /linux/kernel/git/davem/sparc-2.6

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: fix section mismatch warning in mdesc.c
  [SPARC64]: fix section mismatch warning in pci_sunv4
  [SPARC64]: Stop using drivers/char/rtc.c
  [SPARC64]: Convert parport to of_platform_driver.
  [SPARC]: Implement fb_is_primary_device().
  [SPARC64]: Fix virq decomposition.
  [SPARC64]: Use KERN_ERR in IRQ manipulation error printks.
  [SPARC64]: Do not flood log with failed DS messages.
  [SPARC64]: Add proper multicast support to VNET driver.
  [SPARC64]: Handle multiple domain-services-port nodes properly.
  [SPARC64]: Improve VIO device naming further.
  [SPARC]: Make sure dev_archdata is filled in for all devices.
  [SPARC]: Define minimal struct dev_archdata, similarly to sparc64.
  [SPARC]: Fix serial console device detection.

[SPARC64]: fix section mismatch warning in mdesc.c

Fix following warning:
WARNING: vmlinux.o(.text+0x35264): Section mismatch: reference to .init.text:__alloc_bootmem (between 'mdesc_bootmem_alloc' and 'mdesc_bootmem_free')

Rename mdesc_mem_ops to *_ops so modpost ignores __init references
and declare mdesc_bootmem_alloc __init since it is only used
during __init context.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64]: fix section mismatch warning in pci_sunv4

Fix following warning:
WARNING: vmlinux.o(.text+0x3cf50): Section mismatch: reference to .init.text:page_in_phys_avail (between 'pci_sun4v_pbm_init' and 'sun4v_pci_init')

pci_sun4v_pbm_init and sun4v_pci_init was only used under __init
context so declare them _init.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64]: Stop using drivers/char/rtc.c

The existing sparc64 mini_rtc driver can handle CMOS based
rtcs trivially with just a few lines of code and the simplifies
things tremendously.

Tested on SB1500.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64]: Convert parport to of_platform_driver.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC]: Implement fb_is_primary_device().

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64]: Fix virq decomposition.

The dev_handle and dev_ino fields don't match up exactly to
the traditional IMAP_IGN and IMAP_INO masks.

So store them away in a table and look them up directly.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64]: Use KERN_ERR in IRQ manipulation error printks.

Signed-off-by: David S. Miller <davem@davemloft.net>