Tomas Winkler [Tue, 16 Sep 2008 06:01:04 +0000 (14:01 +0800)]
iwlwifi: make PS use named constants
This patch adds named constants for configuring MIMO power save
chain settings.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Tomas Winkler [Tue, 16 Sep 2008 06:01:03 +0000 (14:01 +0800)]
iwlwifi: don't delay scan in IBSS mode
Scan need to be delayed only after association to allow EAPOL
exchange. We don't need the delay for IBSS mode.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Larry Finger [Tue, 16 Sep 2008 19:56:49 +0000 (14:56 -0500)]
b43: Issue warning when RFKILL_INPUT is not enabled
If the system is misconfigured with CONFIG_RFKILL set but CONFIG_RFKILL_INPUT
not set, the built-in radio LEDs will not work. In the current code, no warning
is issued.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Berg [Mon, 15 Sep 2008 11:11:19 +0000 (13:11 +0200)]
cfg80211: fix code ordering in header file
Luis added the regulatory hint stuff to this file without
observing that __ieee80211_get_channel and ieee80211_get_channel
really belong together.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Berg [Mon, 15 Sep 2008 09:26:47 +0000 (11:26 +0200)]
cfg80211: clean up static regdomain mess
The statically defined regdomains are used in a very convoluted
way, use them instead to prime the information we have and then
continue operating normally.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Berg [Mon, 15 Sep 2008 09:10:52 +0000 (11:10 +0200)]
cfg80211: fix regulatory code const
A few pointers and structures in the regulatory code are const,
but because it wasn't done properly a whole bunch of bogus
casts were needed to compile without warning. Mark everything
const properly to avoid that kind of junk code.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Berg [Mon, 15 Sep 2008 08:56:48 +0000 (10:56 +0200)]
cfg80211: clean up regulatory mess
The recent code from Luis is an #ifdef hell and contains lots of
code that's stuffed into the wrong file making a whole bunch of
things needlessly non-static, and besides, what is it doing in
core.c??
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Berg [Mon, 15 Sep 2008 08:30:34 +0000 (10:30 +0200)]
cfg80211: fix static regdomains
When Luis added the static regdomains back he used +/-20
of the centre frequencies to account for 40MHz bandwidth
neglecting the fact that 40MHz bandwidth cannot be used
on the channels close to the allowed band edges.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
David Kilroy [Sat, 13 Sep 2008 11:22:05 +0000 (12:22 +0100)]
wireless: Read scan flags correctly on x86-64
The SIOCSIWSCAN handler is passed data in an iw_point structure. Some
drivers erronously use an iw_param instead.
On 32 bit architectures the difference isn't noticed as the flags
parameter tends to be the only one used by scan handlers and is at the
same offset.
On 64 bit architectures the pointer in the iw_point structure means the
flag parameter is at different offsets in these structures.
Thanks to Jean Tourrilhes for tracking this down for orinoco, and Pavel
Roskin for confirming the fix and identifying other suspect handlers.
Signed-off-by: David Kilroy <kilroyd@googlemail.com>
Acked-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
David S. Miller [Wed, 24 Sep 2008 03:47:22 +0000 (20:47 -0700)]
aoe: Fix OOPS after SKB queue changes.
Reported by Thomas Graf.
If we don't unlink the SKB from the queue when we send it
out in aoenet_xmit(), dev_hard_start_xmit() will see skb->next
as non-NULL and interpret this to mean the SKB is part of a
GSO segment list.
Add __skb_unlink() call to fix that.
Signed-off-by: David S. Miller <davem@davemloft.net>
Oliver Hartkopp [Tue, 23 Sep 2008 21:53:14 +0000 (14:53 -0700)]
can: Add documentation for virtual CAN driver usage
This patch adds a usage documentation for the virtual CAN driver (vcan).
Signed-off-by: Oliver Hartkopp <oliver@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 23 Sep 2008 09:51:41 +0000 (02:51 -0700)]
tcp: Fix queue traversal in tcp_use_frto().
We must check tcp_skb_is_last() before doing a tcp_write_queue_next().
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 23 Sep 2008 08:29:23 +0000 (01:29 -0700)]
tcp: Fix order of tests in tcp_retransmit_skb()
tcp_write_queue_next() must only be made if we know that
tcp_skb_is_last() evaluates to false.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 23 Sep 2008 08:17:18 +0000 (01:17 -0700)]
ppp_generic: Use skb_peek() in ppp_receive_mp_frame().
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 23 Sep 2008 08:11:18 +0000 (01:11 -0700)]
neigh: Remove by-hand SKB queue handling.
Signed-off-by: David S. Miller <davem@davemloft.net>
Jarek Poplawski [Tue, 23 Sep 2008 08:05:56 +0000 (01:05 -0700)]
pkt_sched: Remove the tx queue state check in qdisc_run()
The current check wrongly uses the state of one (currently the first)
tx queue for all tx queues in case of non-default qdiscs. This check
mainly prevented requeuing loop with __netif_schedule(), but now it's
controlled inside __qdisc_run(), while dequeuing. The wrongness of
this check was first noticed by Herbert Xu.
Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 23 Sep 2008 07:50:13 +0000 (00:50 -0700)]
tcp: Use SKB queue handling interfaces instead of by-hand versions.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 23 Sep 2008 07:49:44 +0000 (00:49 -0700)]
net: Add skb_queue_walk_from() and skb_queue_walk_from_safe().
These will be used by TCP write queue handling and elsewhere.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 23 Sep 2008 07:44:42 +0000 (00:44 -0700)]
net: Add skb_queue_next().
A lot of code wants to iterate over an SKB queue at the top level using
it's own control structure and iterator scheme.
Provide skb_queue_next(), which is only valid to invoke if
skb_queue_is_last() returns false.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 23 Sep 2008 07:34:37 +0000 (00:34 -0700)]
tcp: Use skb_queue_is_last() instead of by-hand version.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 23 Sep 2008 07:34:07 +0000 (00:34 -0700)]
net: Add skb_queue_is_last().
Several bits of code want to know "is this the last SKB in
a queue", and all of them implement this by hand.
Provide an common interface to make this check.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 23 Sep 2008 07:27:47 +0000 (00:27 -0700)]
usbatm: Use skb_queue_walk_safe() instead of by-hand implementation.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 23 Sep 2008 07:23:30 +0000 (00:23 -0700)]
zd1211: Use skb_queue_walk() instead of by-hand implementation.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 23 Sep 2008 07:19:19 +0000 (00:19 -0700)]
de4x5: Use skb_queue_head instead of by-hand implementation.
Signed-off-by: David S. Miller <davem@davemloft.net>
Jarek Poplawski [Tue, 23 Sep 2008 05:16:23 +0000 (22:16 -0700)]
pkt_sched: Check the state of tx_queue in dequeue_skb()
Check in dequeue_skb() the state of tx_queue for requeued skb to save
on locking and re-requeuing, and possibly remove the current check in
qdisc_run(). Based on the idea of Alexander Duyck.
Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 23 Sep 2008 05:15:58 +0000 (22:15 -0700)]
pkt_sched: Always use q->requeue in dev_requeue_skb().
There is no reason to call into the complicated qdiscs
just to remember the last SKB where we found the device
blocked.
The SKB is outside of the qdiscs realm at this point.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 23 Sep 2008 05:15:30 +0000 (22:15 -0700)]
pkt_sched: Make qdisc->gso_skb a list.
The idea is that we can use this to get rid of
->requeue().
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 23 Sep 2008 05:14:36 +0000 (22:14 -0700)]
sctp: Use skb_queue_walk_safe() and skb_queue_split_tail_init().
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 23 Sep 2008 04:57:21 +0000 (21:57 -0700)]
net: Fix bus in SKB queue splicing interfaces.
Handle the case of head being non-empty, by adding list->qlen
to head->qlen instead of using direct assignment.
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephen Hemminger [Tue, 23 Sep 2008 04:28:11 +0000 (21:28 -0700)]
net: network device name ifalias support
This patch add support for keeping an additional character alias
associated with an network interface. This is useful for maintaining
the SNMP ifAlias value which is a user defined value. Routers use this
to hold information like which circuit or line it is connected to. It
is just an arbitrary text label on the network device.
There are two exposed interfaces with this patch, the value can be
read/written either via netlink or sysfs.
This could be maintained just by the snmp daemon, but it is more
generally useful for other management tools, and the kernel is good
place to act as an agreed upon interface to store it.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 23 Sep 2008 03:18:47 +0000 (20:18 -0700)]
usbnet: Use skb_queue_walk_safe() instead of by-hand implementation.
Signed-off-by: David S. Miller <davem@davemloft.net>
Remi Denis-Courmont [Tue, 23 Sep 2008 03:09:46 +0000 (20:09 -0700)]
Phonet: kernel documentation
Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remi Denis-Courmont [Tue, 23 Sep 2008 03:09:13 +0000 (20:09 -0700)]
Phonet: emit errors when a packet cannot be delivered locally
When there is no listener socket for a received packet, send an error
back to the sender.
Signed-off-by: Remi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remi Denis-Courmont [Tue, 23 Sep 2008 03:08:39 +0000 (20:08 -0700)]
Phonet: proc interface for port range
Phonet endpoints are bound to individual ports.
This provides a /proc/sys/net/phonet (or sysctl) interface for
selecting the range of automatically allocated ports (much like the
ip_local_port_range with IPv4).
Signed-off-by: Remi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remi Denis-Courmont [Tue, 23 Sep 2008 03:08:04 +0000 (20:08 -0700)]
Phonet: provide MAC header operations
Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remi Denis-Courmont [Tue, 23 Sep 2008 03:05:57 +0000 (20:05 -0700)]
Phonet: Phonet datagram transport protocol
This provides the basic SOCK_DGRAM transport protocol for Phonet.
Signed-off-by: Remi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remi Denis-Courmont [Tue, 23 Sep 2008 03:05:19 +0000 (20:05 -0700)]
Phonet: common socket glue
This provides the socket API for the Phonet protocols family.
Signed-off-by: Remi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remi Denis-Courmont [Tue, 23 Sep 2008 03:04:30 +0000 (20:04 -0700)]
Phonet: Netlink interface
This provides support for configuring Phonet addresses, notifying
Phonet configuration changes, and dumping the configuration.
Signed-off-by: Remi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remi Denis-Courmont [Tue, 23 Sep 2008 03:03:44 +0000 (20:03 -0700)]
Phonet: network device and address handling
This provides support for adding Phonet addresses to and removing
Phonet addresses from network devices.
Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remi Denis-Courmont [Tue, 23 Sep 2008 03:03:00 +0000 (20:03 -0700)]
Phonet: add CONFIG_PHONET
Signed-off-by: Remi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remi Denis-Courmont [Tue, 23 Sep 2008 03:02:10 +0000 (20:02 -0700)]
Phonet: PF_PHONET protocol family support
This is the basis for the Phonet protocol families, and introduces
the ETH_P_PHONET packet type and the PF_PHONET socket family.
Signed-off-by: Remi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remi Denis-Courmont [Tue, 23 Sep 2008 02:51:15 +0000 (19:51 -0700)]
Phonet: global definitions
Signed-off-by: Remi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Tue, 23 Sep 2008 02:48:19 +0000 (19:48 -0700)]
ipsec: Fix xfrm_state_walk race
As discovered by Timo Teräs, the currently xfrm_state_walk scheme
is racy because if a second dump finishes before the first, we
may free xfrm states that the first dump would walk over later.
This patch fixes this by storing the dumps in a list in order
to calculate the correct completion counter which cures this
problem.
I've expanded netlink_cb in order to accomodate the extra state
related to this. It shouldn't be a big deal since netlink_cb
is kmalloced for each dump and we're just increasing it by 4 or
8 bytes.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jaswinder Singh [Tue, 23 Sep 2008 02:27:10 +0000 (19:27 -0700)]
cassini: use request_firmware
Firmware blob looks like this...
__le16 load_address
unsigned char data[]
[akpm@linux-foundation.org: include vmalloc.h]
Signed-off-by: Jaswinder Singh <jaswinder@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julia Lawall [Tue, 23 Sep 2008 02:24:45 +0000 (19:24 -0700)]
net/atm/lec.c: drop code after return
The break after the return serves no purpose.
Signed-off-by: Julia Lawall <julia@diku.dk>
Reviewed-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julia Lawall [Tue, 23 Sep 2008 02:23:48 +0000 (19:23 -0700)]
drivers/net/wan: Use DIV_ROUND_UP
The kernel.h macro DIV_ROUND_UP performs the computation (((n) + (d) - 1) /
(d)) but is perhaps more readable.
An extract of the semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@haskernel@
@@
#include <linux/kernel.h>
@depends on haskernel@
expression n,d;
@@
(
- (n + d - 1) / d
+ DIV_ROUND_UP(n,d)
|
- (n + (d - 1)) / d
+ DIV_ROUND_UP(n,d)
)
@depends on haskernel@
expression n,d;
@@
- DIV_ROUND_UP((n),d)
+ DIV_ROUND_UP(n,d)
@depends on haskernel@
expression n,d;
@@
- DIV_ROUND_UP(n,(d))
+ DIV_ROUND_UP(n,d)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julia Lawall [Tue, 23 Sep 2008 02:22:58 +0000 (19:22 -0700)]
drivers/atm: Use DIV_ROUND_UP
The kernel.h macro DIV_ROUND_UP performs the computation (((n) + (d) - 1) /
(d)) but is perhaps more readable.
In the case of the file drivers/atm/eni.c, I am a little bit suspicious of
the -1 at the end of the affected expression. Please check that that is
what is wanted.
An extract of the semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@haskernel@
@@
#include <linux/kernel.h>
@depends on haskernel@
expression n,d;
@@
(
- (n + d - 1) / d
+ DIV_ROUND_UP(n,d)
|
- (n + (d - 1)) / d
+ DIV_ROUND_UP(n,d)
)
@depends on haskernel@
expression n,d;
@@
- DIV_ROUND_UP((n),d)
+ DIV_ROUND_UP(n,d)
@depends on haskernel@
expression n,d;
@@
- DIV_ROUND_UP(n,(d))
+ DIV_ROUND_UP(n,d)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ming Lei [Tue, 23 Sep 2008 02:21:51 +0000 (19:21 -0700)]
hci_usb: replace mb with smp_mb
smp_mb is enough for ordering memory operations among processors,and mb is
more expensive than smp_mb for UP machine, so replace it with smp_mb().
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Harvey Harrison [Tue, 23 Sep 2008 02:20:51 +0000 (19:20 -0700)]
net: em_cmp.c use unaligned access helpers
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bjorn Helgaas [Tue, 23 Sep 2008 02:20:06 +0000 (19:20 -0700)]
irda: follow lspci device/vendor style
Use "[%04x:%04x]" for PCI vendor/device IDs to follow the format used by
lspci(8).
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andi Kleen [Tue, 23 Sep 2008 02:18:15 +0000 (19:18 -0700)]
mISDN: misc timerdev fixes
- Remove noop VFS stubs. The VFS does that on a NULL pointer anyways.
- Fix timer handler prototype to be correct
- Comment ugly SMP race I didn't fix.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Harvey Harrison [Tue, 23 Sep 2008 02:16:51 +0000 (19:16 -0700)]
mISDN: annotate iomem pointer and add statics
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Harvey Harrison [Tue, 23 Sep 2008 02:16:20 +0000 (19:16 -0700)]
mISDN: endian annotations for struct zt
Found two possible bugs where the z1 value was used directly without
byteswapping.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julia Lawall [Tue, 23 Sep 2008 02:04:54 +0000 (19:04 -0700)]
drivers/isdn/capi/kcapi.c: Adjust error handling code involving capi_ctr_put
After calling capi_ctr_get, error handling code should call capi_ctr_put.
The semantic match that finds this problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@r@
expression x,E;
statement S;
position p1,p2,p3;
@@
(
if ((x = capi_ctr_get@p1(...)) == NULL || ...) S
|
x = capi_ctr_get@p1(...)
... when != x
if (x == NULL || ...) S
)
<...
if@p3 (...) { ... when != capi_ctr_put(x)
when != if (x) { ... capi_ctr_put(x); ...}
return@p2 ...;
}
...>
(
return x;
|
return 0;
|
x = E
|
E = x
|
capi_ctr_put(x)
)
@exists@
position r.p1,r.p2,r.p3;
expression x;
int ret != 0;
statement S;
@@
* x = capi_ctr_get@p1(...)
<...
* if@p3 (...)
S
...>
* return@p2 \(NULL\|ret\);
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kaihui Luo [Tue, 23 Sep 2008 02:02:36 +0000 (19:02 -0700)]
netfilter: xt_time gives a wrong monthday in a leap year
The function localtime_3 in xt_time.c gives a wrong monthday in a leap
year after 28th 2. calculating monthday should use the array
days_since_leapyear[] not days_since_year[] in a leap year.
Signed-off-by: Kaihui Luo <kaih.luo@gmail.com>
Acked-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 22 Sep 2008 08:29:52 +0000 (01:29 -0700)]
cxgb3: Use SKB list interfaces instead of home-grown implementation.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 22 Sep 2008 08:15:02 +0000 (01:15 -0700)]
isdn: isdn_ppp: Use SKB list facilities instead of home-grown implementation.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 22 Sep 2008 05:44:08 +0000 (22:44 -0700)]
bluetooth: hci_bcsp: Use SKB list interfaces instead of home-grown stuff.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 22 Sep 2008 05:36:49 +0000 (22:36 -0700)]
aoe: Use SKB interfaces for list management instead of home-grown stuff.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 22 Sep 2008 05:36:24 +0000 (22:36 -0700)]
net: Add new interfaces for SKB list light-weight init and splicing.
This will be used by subsequent changesets.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 22 Sep 2008 04:38:26 +0000 (21:38 -0700)]
atm: idt77252: Use generic SKB queue management instead of home-grown scheme.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 22 Sep 2008 04:28:51 +0000 (21:28 -0700)]
net: Remove __skb_insert() calls outside of skbuff internals.
This minor cleanup simplifies later changes which will convert
struct sk_buff and friends over to using struct list_head.
Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Quetchenbach [Sun, 21 Sep 2008 07:21:51 +0000 (00:21 -0700)]
tcp: advertise MSS requested by user
I'm trying to use the TCP_MAXSEG option to setsockopt() to set the MSS
for both sides of a bidirectional connection.
man tcp says: "If this option is set before connection establishment, it
also changes the MSS value announced to the other end in the initial
packet."
However, the kernel only uses the MTU/route cache to set the advertised
MSS. That means if I set the MSS to, say, 500 before calling connect(),
I will send at most 500-byte packets, but I will still receive 1500-byte
packets in reply.
This is a bug, either in the kernel or the documentation.
This patch (applies to latest net-2.6) reduces the advertised value to
that requested by the user as long as setsockopt() is called before
connect() or accept(). This seems like the behavior that one would
expect as well as that which is documented.
I've tried to make sure that things that depend on the advertised MSS
are set correctly.
Signed-off-by: Tom Quetchenbach <virtualphtn@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnaldo Carvalho de Melo [Sun, 21 Sep 2008 05:20:49 +0000 (22:20 -0700)]
net: Use hton[sl]() instead of __constant_hton[sl]() where applicable
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck [Sun, 21 Sep 2008 05:07:34 +0000 (22:07 -0700)]
multiq: requeue should rewind the current_band
Currently dequeueing a packet and requeueing the same packet will cause a
different packet to be pulled on the next dequeue. This change forces
requeue to rewind the current_band.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ilpo Järvinen [Sun, 21 Sep 2008 04:26:22 +0000 (21:26 -0700)]
tcp: back retransmit_high when it over-estimated
If lost skb is sacked, we might have nothing to retransmit
as high as the retransmit_high is pointing to, so place
it lower to avoid unnecessary walking.
This is mainly for the case where high L'ed skbs gets sacked.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ilpo Järvinen [Sun, 21 Sep 2008 04:25:52 +0000 (21:25 -0700)]
tcp: don't clear lost_skb_hint when not necessary
Most importantly avoid doing it with cumulative ACK. However,
since we have lost_cnt_hint in the picture as well needing
adjustments, it's not as trivial as dealing with
retransmit_skb_hint (and cannot be done in the all place we
could trivially leave retransmit_skb_hint untouched).
With the previous patch, this should mostly remove O(n^2)
behavior while cumulative ACKs start flowing once rexmit
after a lossy round-trip made it through.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ilpo Järvinen [Sun, 21 Sep 2008 04:25:15 +0000 (21:25 -0700)]
tcp: don't clear retransmit_skb_hint when not necessary
Most importantly avoid doing it with cumulative ACK. Not clearing
means that we no longer need n^2 processing in resolution of each
fast recovery.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ilpo Järvinen [Sun, 21 Sep 2008 04:24:49 +0000 (21:24 -0700)]
tcp: remove retransmit_skb_hint clearing from failure
This doesn't much sense here afaict, probably never has. Since
fragmenting and collapsing deal the hints by themselves, there
should be very little reason for the rexmit loop to do that.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ilpo Järvinen [Sun, 21 Sep 2008 04:24:21 +0000 (21:24 -0700)]
tcp: reorganize retransmit code loops
Both loops are quite similar, so they can be combined
with little effort. As a result, forward_skb_hint becomes
obsolete as well.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ilpo Järvinen [Sun, 21 Sep 2008 04:23:49 +0000 (21:23 -0700)]
tcp: remove tp->lost_out guard to make joining diff nicer
The validity of the retransmit_high must then be ensured
if no L'ed skb exits!
This makes a minor change to behavior, we now have to
iterate the head to find out that the loop terminates.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ilpo Järvinen [Sun, 21 Sep 2008 04:22:59 +0000 (21:22 -0700)]
tcp: Reorganize skb tagbit checks
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ilpo Järvinen [Sun, 21 Sep 2008 04:22:17 +0000 (21:22 -0700)]
tcp: remove obsolete validity concern
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ilpo Järvinen [Sun, 21 Sep 2008 04:21:54 +0000 (21:21 -0700)]
tcp: add tcp_can_forward_retransmit
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ilpo Järvinen [Sun, 21 Sep 2008 04:21:16 +0000 (21:21 -0700)]
tcp: No need to clear retransmit_skb_hint when SACKing
Because lost counter no longer requires tuning, this is
trivial to remove (the tuning wouldn't have been too
hard either) because no "new" retransmittable skb appeared
below retransmit_skb_hint when SACKing for sure.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ilpo Järvinen [Sun, 21 Sep 2008 04:20:50 +0000 (21:20 -0700)]
tcp: Kill precaution that's very likely obsolete
I suspect it might have been related to the changed amount
of lost skbs, which was counted by retransmit_cnt_hint that
got changed.
The place for this clearing was very illogical anyway,
it should have been after the LOST-bit clearing loop to
make any sense.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ilpo Järvinen [Sun, 21 Sep 2008 04:20:20 +0000 (21:20 -0700)]
tcp: convert retransmit_cnt_hint to seqno
Main benefit in this is that we can then freely point
the retransmit_skb_hint to anywhere we want to because
there's no longer need to know what would be the count
changes involve, and since this is really used only as a
terminator, unnecessary work is one time walk at most,
and if some retransmissions are necessary after that
point later on, the walk is not full waste of time
anyway.
Since retransmit_high must be kept valid, all lost
markers must ensure that.
Now I also have learned how those "holes" in the
rexmittable skbs can appear, mtu probe does them. So
I removed the misleading comment as well.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ilpo Järvinen [Sun, 21 Sep 2008 04:19:22 +0000 (21:19 -0700)]
tcp: add helper for lost bit toggling
This useful because we'd need to verifying soon in many places
which makes things slightly more complex than it used to be.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ilpo Järvinen [Sun, 21 Sep 2008 04:18:55 +0000 (21:18 -0700)]
tcp: move tcp_verify_retransmit_hint
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ilpo Järvinen [Sun, 21 Sep 2008 04:18:32 +0000 (21:18 -0700)]
tcp: Partial hint clearing has again become meaningless
Ie., the difference between partial and all clearing doesn't
exists anymore since the SACK optimizations got dropped by
an sacktag rewrite.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 19 Sep 2008 23:17:12 +0000 (16:17 -0700)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-next-2.6
David S. Miller [Fri, 19 Sep 2008 23:14:24 +0000 (16:14 -0700)]
qlge: Protect qlge_resume() with CONFIG_PM
Fixes the following build warning:
drivers/net/qlge/qlge_main.c:3897: warning: ‘qlge_resume’ defined but not used
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 19 Sep 2008 23:13:05 +0000 (16:13 -0700)]
qlge: Fix warnings in debugging code.
drivers/net/qlge/qlge_dbg.c: In function ‘ql_dump_qdev’:
drivers/net/qlge/qlge_dbg.c:369: warning: cast to pointer from integer of different size
drivers/net/qlge/qlge_dbg.c:373: warning: cast to pointer from integer of different size
drivers/net/qlge/qlge_dbg.c: In function ‘ql_dump_tx_ring’:
drivers/net/qlge/qlge_dbg.c:457: warning: format ‘%llx’ expects type ‘long long unsigned int’, but argument 2 has type ‘long unsigned int’
drivers/net/qlge/qlge_dbg.c:461: warning: format ‘%llx’ expects type ‘long long unsigned int’, but argument 2 has type ‘long unsigned int’
drivers/net/qlge/qlge_dbg.c: In function ‘ql_dump_rx_ring’:
drivers/net/qlge/qlge_dbg.c:557: warning: format ‘%llx’ expects type ‘long long unsigned int’, but argument 2 has type ‘long unsigned int’
drivers/net/qlge/qlge_dbg.c:565: warning: format ‘%llx’ expects type ‘long long unsigned int’, but argument 2 has type ‘long unsigned int’
drivers/net/qlge/qlge_dbg.c:575: warning: format ‘%llx’ expects type ‘long long unsigned int’, but argument 2 has type ‘long unsigned int’
drivers/net/qlge/qlge_dbg.c:579: warning: format ‘%llx’ expects type ‘long long unsigned int’, but argument 2 has type ‘long unsigned int’
drivers/net/qlge/qlge_dbg.c:598: warning: format ‘%llx’ expects type ‘long long unsigned int’, but argument 2 has type ‘long unsigned int’
drivers/net/qlge/qlge_dbg.c:602: warning: format ‘%llx’ expects type ‘long long unsigned int’, but argument 2 has type ‘long unsigned int’
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 19 Sep 2008 22:51:35 +0000 (15:51 -0700)]
Merge branch 'new-drivers' of /linux/kernel/git/jgarzik/netdev-2.6
David S. Miller [Fri, 19 Sep 2008 19:44:54 +0000 (12:44 -0700)]
net: Fix build with ARCH=um
If UM is going to claim that it supports DMA by setting
HAS_DMA, it should provide a dma_mapping_error() implementation.
Based upon a report by Julius Volz.
Signed-off-by: David S. Miller <davem@davemloft.net>
Rémi Denis-Courmont [Thu, 18 Sep 2008 23:44:31 +0000 (16:44 -0700)]
ISDN sockets: add missing lockdep strings
Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Benjamin Li [Thu, 18 Sep 2008 23:40:49 +0000 (16:40 -0700)]
bnx2: Remove timer_interval field from the bnx2 structure
The timer_interval field is only assigned once, and never reassigned.
We can safely replace all instances of the timer_interval with a
constant value.
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Benjamin Li [Thu, 18 Sep 2008 23:40:03 +0000 (16:40 -0700)]
bnx2: Remove name field from bnx2 structure
The name of the board is only used during the initialization of
the adapter. We can save the space of a pointer by not storing
this information.
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Benjamin Li [Thu, 18 Sep 2008 23:39:16 +0000 (16:39 -0700)]
bnx2: Update MODULE_DESCRIPTION to include the 5716
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Benjamin Li [Thu, 18 Sep 2008 23:38:24 +0000 (16:38 -0700)]
bnx2: In bnx2_set_mac_link() return void rather then int
bnx2_set_mac_link() doesn't need to return any error codes. And
all the callers don't check the return code. It is safe to
change the return type to a void.
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ron Mercer [Thu, 18 Sep 2008 15:56:28 +0000 (11:56 -0400)]
qlge: New Qlogic 10Gb Ethernet Driver.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Guo-Fu Tseng [Mon, 15 Sep 2008 17:00:11 +0000 (01:00 +0800)]
jme: JMicron Gigabit Ethernet Driver
Supporting JMC250, and JMC260.
Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org>
Acked-and-tested-by: Ethan Hsiao <ethanhsiao@jmicron.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Scott Feldman [Mon, 15 Sep 2008 16:17:11 +0000 (09:17 -0700)]
enic: add Cisco 10G Ethernet NIC driver
Signed-off-by: Scott Feldman <scofeldm@cisco.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Chris Snook [Mon, 15 Sep 2008 00:56:10 +0000 (19:56 -0500)]
atl2: add atl2 driver
Driver for Atheros L2 10/100 network device. Includes necessary
changes for Kconfig, Makefile, and pci_ids.h.
Signed-off-by: Chris Snook <csnook@redhat.com>
Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Brian Haley [Tue, 16 Sep 2008 15:11:11 +0000 (11:11 -0400)]
ipvs: change some __constant_htons() to htons()
Change __contant_htons() to htons() in the IPVS code when not in an
initializer.
-Brian
Signed-off-by: Brian Haley <brian.haley@hp.com>
Acked-by: Julius Volz <juliusv@google.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Simon Horman [Wed, 17 Sep 2008 00:10:42 +0000 (10:10 +1000)]
ipvs: add __aquire/__release annotations to ip_vs_info_seq_start/ip_vs_info_seq_stop
This teaches sparse that the following are not problems:
make C=1
CHECK net/ipv4/ipvs/ip_vs_ctl.c
net/ipv4/ipvs/ip_vs_ctl.c:1793:14: warning: context imbalance in 'ip_vs_info_seq_start' - wrong count at exit
net/ipv4/ipvs/ip_vs_ctl.c:1842:13: warning: context imbalance in 'ip_vs_info_seq_stop' - unexpected unlock
Acked-by: Sven Wegener <sven.wegener@stealer.net>
Acked-by: Julius Volz <juliusv@google.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Simon Horman [Wed, 17 Sep 2008 00:10:42 +0000 (10:10 +1000)]
ipvs: supply a valid 0 address to ip_vs_conn_new()
ip_vs_conn_new expects a union nf_inet_addr as the type for its address
parameters, not a plain integer.
This problem was detected by sparse.
make C=1
CHECK net/ipv4/ipvs/ip_vs_core.c
net/ipv4/ipvs/ip_vs_core.c:469:9: warning: Using plain integer as NULL pointer
Acked-by: Sven Wegener <sven.wegener@stealer.net>
Acked-by: Julius Volz <juliusv@google.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Simon Horman [Wed, 17 Sep 2008 00:10:41 +0000 (10:10 +1000)]
ipvs: only unlock in ip_vs_edit_service() if already locked
Jumping to out unlocks __ip_vs_svc_lock, but that lock is not taken until
after code that may jump to out.
This problem was detected by sparse.
make C=1
CHECK net/ipv4/ipvs/ip_vs_ctl.c
net/ipv4/ipvs/ip_vs_ctl.c:1332:2: warning: context imbalance in 'ip_vs_edit_service' - unexpected unlock
Acked-by: Sven Wegener <sven.wegener@stealer.net>
Acked-by: Julius Volz <juliusv@google.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Simon Horman [Wed, 17 Sep 2008 00:08:26 +0000 (10:08 +1000)]
Merge git://git./linux/kernel/git/horms/lvs-2.6 into lvs-next-2.6
John W. Linville [Mon, 15 Sep 2008 21:25:54 +0000 (17:25 -0400)]
libertas: correct "limited range of data type" warning
CC [M] drivers/net/wireless/libertas/wext.o
drivers/net/wireless/libertas/wext.c: In function ‘lbs_get_rts’:
drivers/net/wireless/libertas/wext.c:307: warning: comparison is always
false due to limited range of data type
Signed-off-by: John W. Linville <linville@tuxdriver.com>