Staging: w35und: inline hal_set_phy_type() to wb35_hw_init()

Impact: cleanup

The hal_set_phy_type() is called in wb35_hw_init() only so inline the
function there. Also remove a redundant assignment of ->phy_type to
RF_WB_242_1.

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: clean up comments in wbusb.c

Impact: cleanup

Remove some useless comments and clean up others.

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: simplify hal_init_hardware() and hal_halt()

Impact: cleanup

Now that hal_halt() is called from wb35_hw_halt() only where
->InitialResource is always set to 4, we can simplify
hal_init_hardware() and hal_halt().

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: more simplify hal_init_hardware() error handling

Impact: fix, cleanup

If initialization in hal_init_hardware() fails, we call hal_halt() to
clean up and release resource. However, hal_halt() will attempt to
call del_timer_sync() on ->LEDTimer on "stage 3" although it's not
initialized at that point. Fix that up by simplifying error handling
logic in hal_init_hardware() with gotos.

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: simplify hal_init_hardware() error handling

Impact: cleanup

Use gotos to simplify the deep if-statement nesting in
hal_init_hardware().

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: simplify error handling in wb35_hw_init()

Impact: cleanup

Change hal_init_hardware() to return an error code rather than a boolean
to simplify error handling in wb35_hw_init().

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: move hal_init_hardware() and hal_halt() int wbusb.c

Impact: cleanup

The hal_init_hardware() and hal_halt() functions are only used in
wbusb.c so move them there.

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: replace switch error handling with gotos in wb35_hw_init()

Impact: cleanup

This patch replaces the switch-based error handling in wb35_hw_init()
with regular gotos.

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: remove unused code from wbsoft_configure_filter()

We don't initialize hardware multicast filter in the driver nor do we know how
to do that. Therefore, remove some code that isn't actually used from
wbsoft_configure_filter().

Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging winbond: boolean negation and bitwise operation in wrong order

The semantic patch that makes this change is:
(http://www.emn.fr/x-info/coccinelle/)

@@ expression E; constant C; @@
(
- !E == C
+ E != C
)

Signed-off-by: Diego Liziero <diegoliz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: otus: beyond ARRAY_SIZE of wd->ap.wds.encryMode

Do not go beyond ARRAY_SIZE of wd->ap.wds.encryMode

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: otus: 80211core/ccmd.c: Fix Coding Style

Signed-off-by: Dragoslav Zaric <dragoslav.zaric.kd@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: remove driver_data direct access of struct device

In the near future, the driver core is going to not allow direct access
to the driver_data pointer in struct device.  Instead, the functions
dev_get_drvdata() and dev_set_drvdata() should be used.  These functions
have been around since the beginning, so are backwards compatible with
all older kernel versions.

Cc: Leon Woestenberg <leon@sidebranch.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: fix operator precedence errors

`!' has a higher precedence than `&' and `|' has a higher precedence than `?'

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: stlc45xx: replace print_mac with %pM

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: remove unused #include <linux/version.h>'s

Remove unused #include <linux/version.h>'s.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt3070: remove dupilcated #include

Remove dupilcated #include in drivers/staging/rt3070/rt_linux.h.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8187se: wmm_param[1].ac_aci_acm_aifsn tested twice

wmm_param[1].ac_aci_acm_aifsn was tested twice, the second should have been
wmm_param[3].ac_aci_acm_aifsn.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8187se: convert to net_device_ops

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8187se: Use to_delayed_work

Use the recently added to_delayed_work() helper function.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2870: Don't call sprintf() with overlapping input and output.

The use of sprintf() to append to a buffer, as in
  sprintf(buf, "%sEntry: %d\n", buf, i)
is not valid according to C99 ("If copying takes place between objects
that overlap, the behavior is undefined.").  It breaks at least in
userspace under gcc -D_FORTIFY_SOURCE.  Replace this construct with
  sprintf(buf + strlen(buf), "Entry: %d\n", i)

This patch was automatically generated using
  perl -0pe 's/(sprintf\s*\(\s*([^,]*))(\s*,\s*")%s((?:[^"\\]|\\.)*"\s*,)\s*\2\s*,/$1 + strlen($2)$3$4/g'
  perl -0pe 's/(snprintf\s*\(\s*([^,]*))(\s*,[^,]*?)(\s*,\s*")%s((?:[^"\\]|\\.)*"\s*,)\s*\2\s*,/$1 + strlen($2)$3 - strlen($2)$4$5/g'

Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2860: Don't call sprintf() with overlapping input and output.

The use of sprintf() to append to a buffer, as in
  sprintf(buf, "%sEntry: %d\n", buf, i)
is not valid according to C99 ("If copying takes place between objects
that overlap, the behavior is undefined.").  It breaks at least in
userspace under gcc -D_FORTIFY_SOURCE.  Replace this construct with
  sprintf(buf + strlen(buf), "Entry: %d\n", i)

This patch was automatically generated using
  perl -0pe 's/(sprintf\s*\(\s*([^,]*))(\s*,\s*")%s((?:[^"\\]|\\.)*"\s*,)\s*\2\s*,/$1 + strlen($2)$3$4/g'
  perl -0pe 's/(snprintf\s*\(\s*([^,]*))(\s*,[^,]*?)(\s*,\s*")%s((?:[^"\\]|\\.)*"\s*,)\s*\2\s*,/$1 + strlen($2)$3 - strlen($2)$4$5/g'

Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt3070: replace __FUNCTION__ usages

__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Alessio Igor Bogani <abogani@texware.it>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: sxg: Add missing __devexit_p()

The remove function uses __devexit, so the .remove assignment needs
__devexit_p() to fix a build error with hotplug disabled.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: sxg: replace __FUNCTION__ usages

__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Alessio Igor Bogani <abogani@texware.it>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: meilhaus: fix build warnings

This fixes some build warnings in the meilhaus driver.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: meilhaus: Remove long-deprecated SA_* interrupt macros.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: meilhaus, move tables to .c

Remove pci and usb tables from the header and place them directly in
the code.

While at it, use PCI_VDEVICE() to shorten the code.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: David Kiliani <mail@davidkiliani.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: meilhaus, annotate cpi functions

Add __devinit and __devexit to pci probe/remove. Also make pci_driver
static.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: David Kiliani <mail@davidkiliani.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: meilhaus, switch to misc device

There is no need to occupy one major number because of one device.

Switch to misc device, which also emits uevent, so that the dev node
is also created by udev.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: David Kiliani <mail@davidkiliani.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: agnx: fix build warnings

This fixes some build warnings in the agnx driver.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: agnx: replace print_mac with %pM

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: agnx, fix bssid compiler warnings

conf->bssid is const. Propagate const to not get compiler warnings:
agnx/pci.c: In function ‘agnx_config_interface’:
agnx/pci.c:319: warning: passing argument 2 of ‘agnx_set_bssid’ discards qualifiers from pointer target type
agnx/pci.c:321: warning: passing argument 2 of ‘hash_write’ discards qualifiers from pointer target type

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: agnx, fix fail paths in probe

Return error on fail paths instead of 0.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: agnx, remove memlens from probe

Pass 0 to pci_iomap instead. It will cope with that per se.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: agnx, probe cleanup

- switch printks to dev_*
- remove useless comments
- remove useless prints (for info we can obtain from lspci or /sys)

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: uses udelay, needs delay.h

comedi driver(s) use udelay() so they need to #include delay.h.

drivers/staging/comedi/drivers/adq12b.c: In function 'adq12b_ai_rinsn':
drivers/staging/comedi/drivers/adq12b.c:328: error: implicit declaration of function 'udelay'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: cb_pcidas.c: Fix build warning (type mismatch)

spin_lock_irqsave expects flags to be unsigned long, not unsigned int.

Signed-off-by: Gerard Lledo <gerard.lledo@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: usbdux: buffer overflow error handling

These changes guarantee that the URBs are not resubmitted in case of a
comedi buffer overflow.  Otherwise this runs in the background even when
the userspace program has terminated.

From: Bernd Porr <BerndPorr@f2s.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: comedi: Move pcm do_cmdtest function into a single source file

Many of the comedi source code has functions that were created with
cut and paste, this moves the do_cmdtest function into a single file.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: comedi: Remove MIN macro

Remove the MIN() macro and instead use the min() provided by kernel.h

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: comedi: fix missing parentheses

Add missing parentheses.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: data.c should include delay.h

Fix this build error:
.../data.c:86: error: implicit declaration of function 'udelay'

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: comedi_test.c should include timer.h

Fix this build error:
.../comedi_test.c:82: error: field timer has incomplete type
.../comedi_test.c: In function waveform_ai_interrupt:
.../comedi_test.c:188: error: implicit declaration of function mod_timer
.../comedi_test.c:188: error: jiffies undeclared (first use in this function)

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: comedi: fix pcmcia build breakage

Add PCCARD dependancy to the PCMCIA drivers to fix build breakage.

Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: Comedi: vmk80xx: Add k8061 support

This patch adds support for the Velleman K8061 USB board
http://www.velleman.be/ot/en/product/view/?id=364910

Signed-off-by: Manuel Gebele <forensixs@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: simply read and write functions in adl_pci8164

There are several read and write functions in adl_pci8164 that are
essentially the same thing.  They were created with a cut and paste.
Change them to use a common function.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: replace for loop with msleep()

Replace 2 attempts to use a for loop as a sleep with a call to msleep().

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: remove some RT code that lingered

This removes some pieces of RT code that was part of the main code
paths.

Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: remove RT code

This removes the unused RT code from the comedi subsystem.

A lot of drivers needed to then include interrupt.h on their own, as they
were picking it up through the comedi_rt.h inclusion.

Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: remove comedi-specific wrappers

There are a number of comedi "wrappers" for some RT functions that are
about to go away.  This patch removes all of the wrapper calls within
the comedi drivers and core in order to prepare for removing the RT
comedi code.

Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: convert usbdux* to use firmware_request

The firmware is now in the linux-firmware tree, so we can move these two
drivers to use the proper request_firmware infrastructure.

From: Bernd Porr <BerndPorr@f2s.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: move while to same line as } in do loops

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: comment out useless if

This if test doesn't do anything, so comment it out.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: make use of ARRAY_SIZE macro

Replace instances of computing number of elements in an array with
sizeof(foo)/sizeof(struct footype) with the ARRAY_SIZE macro.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: more fix the way structs are initialized.

Change from the foo: bar format to the .foo = bar format.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: more fix "foo * bar" should be "foo *bar"

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: remove space after ampersand

Change calses of & foo to &foo as suggested by checkpatch.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: more remove C99 comments

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: fix the way structs are initialized.

Change from the foo: bar format to the .foo = bar format.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: Remove parens around return values

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: remove assignment in conditionals

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: non working tests on unsigned cmd->convert_arg

Remove tests for negative unsigned.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: Makefile changes

this patch will sort the 'Comedi USB drivers' section in the
staging/comedi/drivers/Makefile in alphabetical order, and add the
vmk80xx.c driver to the build.

From: Manuel Gebele <forensixs@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: vmk80xx.c: get the driver to build properly

There have been changes in the comedi core, this fixes the vmk80xx.c
driver to work properly with them, so it now will build properly.

Cc: Manuel Gebele <forensixs@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: add vmk80xx USB driver

The k80xx module was completely revised again. The update contains the
following new main features:
- support for digital input
- support for digital output
- support for pulse counters
- support up to 16 boards (by the way, the windows driver and the k8055
  library (libk8055) has support for only 4 boards)

The driver can now manage all features what the board has to offer:
- analog input/output
- digital input/output
- pulse counters (read, reset, set debounce time)

I've also fixed some mistaken in the drivers source code/logic.

By testing all of the driver features i got no errors or something else.
The driver works fine....

From: Manuel Gebele <forensixs@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: Comedi: change space indentation to tabs

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging Comedi: fix spacing around parens

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: Add spaces after commas

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: fix "foo * bar" should be "foo *bar"

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: remove dupilcated #include

Remove dupilcated #include in drivers/staging/comedi/drivers/8253.h.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: replace __FUNCTION__ usages

__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Alessio Igor Bogani <abogani@texware.it>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: jr3_pci: Use struct device from pci_dev for firmware loading.

Signed-off-by: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: Added sysfs attribute files for setting and querying subdevice buffer sizes.

Signed-off-by: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: amplc_pc236: Corrected documentation.

Interrupt is triggered by rising edge on port C bit 3 (not bit 7).

From: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: Undo stupid commit made 3 months ago

Undo stupid commit made 3 months ago :
 "Fix redefinition of macro comedi_rt_task_context_t".
 It wasn't being redefined, it was being defined for RTLinux.

From: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: Work around malformed RTAI_VERSION_CODE.

Signed-off-by: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: Comedi: ni_600x: Added support for comedi_poll.

Signed-off-by: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: pcl818: Tidy up AI command after channel dropout or similar error.

It was causing subsequent commands to fail with -EBUSY.

From: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: pcl818: Fix option handling for FIFO mode (hopefully!).

Signed-off-by: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: Fixed Kconfig option for COMEDI_PCMCIA_DRIVERS

Signed-off-by: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: set PCI and PCMCIA defines

The comedi drivers are looking for CONFIG_COMEDI_PCI and
CONFIG_COMEDI_PCMCIA, not the current config items.  This creates a
define so that things build properly when these options are selected.
Long term goal is to fix up the drivers to not need any defines.

Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: fix build errors in pcmcia comedi drivers

This fixes a few minor build errors that were previously undetected in
the comedi pcmcia drivers.

Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: 'pcmcia_parse_tuple()' now has two arguments, not three.

This fixes the build error in the cv_das16_cs driver

From: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: Finish removing ni_private typedef

This fixes compilation of ni_mio_cs.c that was broken.

Signed-off-by: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: Remove C99 comments

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: comedi, remove interrupt.h

Remove interrupt wraparound. Use defines from linux/interrupt.h
instead.

Change also parameter types of functions taking ISR to irq_handler_t.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: David Schleef <ds@schleef.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: remove C99 comments in s526.c

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: remove C99 comments in pcl816.c

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: remove C99 comments in pcl724.c

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: remove C99 comments in ni_labpc.c

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: remove C99 comments in ni_at_a2150.c

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: remove C99 comments in mpc624.c

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: remove C99 comments in gsc_hpdi.c

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: remove C99 comments in cb_pcimdas.c

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: remove C99 comments in cb_pcidas.c

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: remove C99 comments in cb_pcidas64.c

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: remove C99 comments in c6xdigio.c

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: remove C99 comments in adv_pci1723.c

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: remove C99 comments in adl_pci9118.c

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>