staging: comedi: ni_stc.h: add read/write callbacks to struct ni_private

The {read,write}[bwl] macros used to access the registers in the ni_atmio,
ni_mio_cs, and ni_pcimio drivers and the included ni_mio_common.c file all
rely on a local variable having a specific name. They also require some of
the ni_mio_common code to need a __maybe_unused tag on the devpriv local
variable.

Remove all the macros by converting them into private functions and storing
the callbacks in the private data.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: remove unused members from struct ni_private

Remove all the unsed members from the private data for the ni mio drivers.

The ao0p and ao1p members are only used in the ni_ao_reset() function and
the code is commented out. Remove them, and the commented out code, as well.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: remove NI_PRIVATE_COMMON macro

This macro is used to create the private data structure that is used by
the ni_atmio, ni_mio_cs, and ni_pcimio drivers. These drivers all include
the ni_mio_common.c source to provide most of the driver functionality.

The only driver specific information needed to convert the macro into a
proper struct definition is the MAX_N_CALDACS define. This define is used
to size a couple array members in the struct. The ni_atmio and ni_mio_cs
drivers both define MAX_N_CALDACS as 32. The ni_pcimio driver defines it
as (16+16+2). The ni_mio_common file only uses this define to sanity check
that the struct members are large enough for the number of channels in
the calibration subdevice.

Move the MAX_N_CALDACS define to ni_stc.h and set it to the largest number
of caldacs (34).

The ni_atmio and ni_mio_cs drivers also add one additional member to the
private data struct before using the NI_PRIVATE_COMMON macro.

For the ni_atmio driver, the struct pnp_dev pointer can be saved in the
comedi_device as the 'hw_dev'. The (*detach) of this driver can then use
to_pnp_dev() to get it back when detaching the pnp device.

In the ni_mio_cs driver, the struct pcmia_device pointer is not used so
it can simply be removed.

The NI_PRIVATE_COMMON macro can then be converted into a proper struct
definition.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ke_counter: add ability to select counter clock source

Add an (*insn_config) to the counter subdevice to allow the user to select
the clock source for the counters using the INSN_CONFIG_SET_CLOCK_SRC
instruction. The current selection can be queried with the instruction
INSN_CONFIG_GET_CLOCK_SRC.

Also, handle the INSN_CONFIG_RESET instruction to reset all the counters.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: simplify A/D trigger selection code

The functions pci9111_trigger_source_set(), pci9111_pretrigger_set(),
and pci9111_autoscan_set() are all used to select the A/D trigger type.
They all do a read/mask/set/write of the A/D Trigger Mode Control register.

Simplify the code by removing these helper functions and combining all
the trigger bits so that a single write can be used to set the register.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: remove PCI9111_HR_DEVICE_ID define

This define is only used in the pci_device_id table and doesn't add
any additional clarity to the code. Remove the define and just open
code the value.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: remove PCI9111_DRIVER_NAME define

This define is only used in a comedi_error() message. The addition of
the driver name to the message is not necessary. Remove the define.

For aesthetics, convert the comedi_error() into a dev_dbg().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl724: add support for Diamond Systems ONYX-MM-DIO module

The Diamond Systems ONYX-MM-DIO board is a PC/104 module with two 8255
chips providing 48 digital I/O channels.

This board can be supported by the pcl724 driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl730: add support for Diamond Systems IR104-PBF module

The Diamond Systems IR104-PBF board is a PC/104 module with 20
optoisolated inputs and 20 relay outputs.

This board can be supported by the pcl730 driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregk@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_common.h: remove ADDIDATA_* defines

These defines don't add any additional clarity to the addi_data drivers.
Just remove them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_common.h: remove {LO, HI}WORD macros

These macros don't add any additional clarity to the addi_data drivers.
Just remove them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_common.h: remove ADDIDATA_{EN, DIS}ABLE defines

These defines don't add any additional clarity to the addi_data drivers.
Just remove them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_common.h: remove ADDI_{EN, DIS}ABLE defines

These defines don't add any additional clarity to the addi_data drivers.
They are also only used in the addi_apci_3120 driver. Just remove them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_common.h: remove APCI1710_SAVE_INTERRUPT define

This define is not used. Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_common.h: remove 'b_SingleDiff' from private data

This member is set but never used. Just remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_daq_700: update driver comment

Reformat the comment describing this comedi driver to use the usual
block comment format.

Also remove reference to digital I/O emulating an 8255, because it
doesn't, and remove "DIO only" from the "Description:" line as it also
supports analog inputs.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adq12b: tidy up the register map defines

Cleanup the existing defines and add some missing bit defines.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adq12b: tidy up the subdevice init

For aesthetics, add some whitespace to the subdevice init.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adq12b: remove 's->len_chanlist' init for analog inputs

This driver does not support async commands so the len_chanlist init is
unnecessary. Remove it and allow the core to default the value to '1'.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adq12b: remove ADQ12B_SIZE define

This define is only used in the comedi_request_region() call to
specify the I/O resource size. Remove it and just open code the
value.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adq12b: remove 'differential' from private data

This member of the private data is only used during the attach to
determine if there are 8 differential or 16 single-ended analog
inputs. Remove the member and use the comedi_devconfig option
directly.

Also, fix the subdev_flags when differential analog inputs are used.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adq12b: remove 'unipolar' from private data

This member of the private data is only used during the attach to
determine which range table to use for the analog inputs. Remove
the member and use the comedi_devconfig option directly.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adq12b: tidy up adq12b_ai_rinsn()

For aesthetics, rename this function.

Clean up the local variables by reusing 'val' instead of using
separate variables for the:
  'status' - use once to trigger the first A/D conversion
  'hi' and 'lo' - used to read the A/D conversion result

For aesthetics, change the final return to insn->n and remove the
comment.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adq12b: fix ctreg (ai channel/range) programming

This driver only updates the ctreg (ai channel/range) register if the
desired channel or range has changed since the last analog input read
operation. It does this becuase the hardware requires an udelay to
allow the multiplexor to settle. Unfortunatly the current code never
updates the 'last_channel' and 'last_range' in the private data so
the ctreg gets updated every time.

Fix this and simplify it a bit by just storing the last ctreg value
in the private data.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: fix the (*insn_read) for the freq_out counter

The (*insn_read) functions are supposed to "read" insn->n data values and
return the number of values read.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: fix the (*insn_write) for the freq_out counter

The (*insn_write) functions are supposed to write insn->n data values and
return the number of values written. For this subdevice it only makes sense
to write the last data value.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: absorb helpers into ni_freq_out_insn_config()

Absorb the helper functions that handle the INSN_CONFIG_SET_CLOCK_SRC and
INSN_CONFIG_GET_CLOCK_SRC comedi instructions.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: use dev->write_subdev

The (*attach) in ni_E_init() sets the dev->write_subdev to the analog
output subdevice. Use that instead of accessing the dev->subdevices
array directly.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: use dev->read_subdev

The (*attach) in ni_E_init() sets the dev->read_subdev to the analog
input subdevice. Use that instead of accessing the dev->subdevices
array directly.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: move externally called functions to EOF

This source file is included by the ni_atmio, ni_mio_cs, and ni_pcmio
drivers to support the common hardware on National Instruments DAQ-STC
based boards.

The only functions actually used by the external source files are
ni_E_interrupt(), ni_alloc_private(), ni_E_init(), and mio_common_detach().
The rest of the functions in this file are only used locally.

For aesthetics, move all the externally called functions to the end of
the file.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: move disabled GPCT functions

I have not determined if the code in these functions is actually
usable. For now just move the disabled code closer to the working
gpct functions.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: remove forward declaration 24

Move some functions to remove the need for the remaining forward declarations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: remove forward declaration 23

Move ni_set_master_clock() and its helper functions to remove the need
for the forward declaration.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: remove forward declaration 22

Move ni_rtsi_insn_config() and its helper functions to remove the need
for the forward declaration.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: remove forward declaration 21

Move ni_rtsi_init() to remove the need for the forward declaration.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: remove forward declaration 20

Move ni_ai_insn_read() to remove the need for a forward declaration.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: remove forward declaration 19

Move ni_E_interrupt() to remove the need for some forward declarations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: remove forward declaration 18

Move ni_ai_drain_dma() to remove the need for the forward declaration.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: remove forward declaration 17

Move the get_last_sample_*() helpers to remove the need for the forward
declarations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: remove forward declaration 16

Move ni_ai_insn_config() to remove the need for a forward declaration.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: remove forward declaration 15

Move ni_ai_inttrig() to remove the need for the forward declaration.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: remove forward declaration 14

Move shutdown_ai_command() to remove the need for the forward
declaration.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: remove forward declaration 13

Move ni_serial_insn_config() to remove the need for some forward
declarations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: remove forward declaration 12

Remove the need for the forward declaration of ni_cdio_cancel() by
indirectly calling it using the subdevice (*cancel).

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: remove forward declaration 11

Move ni_cdio_cmd() to remove the need for the forward declaration
of ni_cdo_inttrig().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: remove forward declaration 10

These forward declarations are not needed.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: remove forward declaration 9

Move ni_rtsi_insn_bits() to remove the need for the forward declaration.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: remove forward declaration 8

Move the cs5529 calibration subdevice functions and helpers to remove
the need for the forward declarations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: remove forward declaration 7

Move the programmable function inputs subdevice functions and helpers
to remove the need for the forward declarations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: remove forward declaration 6

Move the ni_gpct_cmd() and ni_gpct_cancel() functions to remove the
need for the forward declarations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: remove forward declaration 5

Move the calibration subdevice functions and helpers to remove the need
for the forward declarations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: remove forward declaration 4

Move the caldac "packbits" callbacks to remove the need for the forward
declarations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: remove forward declaration 3

Move the pwm config functions to remove the need for the forward
declarations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: remove forward declaration 2

Move the eeprom read functions to remove the need for the forward
declarations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: remove forward declaration 1

Move ni_8255_callback() to remove the need for the forward declaration.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm: Remove redundant casting in Bcmchar.c

Casting value returned by kzalloc is useless.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Remove redundant casting in rtw_mlme.c

Casting value returned by kzalloc is useless.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Remove redundant casting in rtw_mlme_ext.c

Casting value returned by kzalloc is useless.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: usbip: fixed a coding-style warning

This fixes the following warning:
- WARNING: __constant_cpu_to_le32 should be cpu_to_le32

Signed-off-by: Alexey Tulia <alexey.tulia@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Add compiler check for -Wtype-limits

Gcc versions before 4.3 do not support -Wtype-limits:

cc1: error: unrecognized command line option "-Wtype-limits"

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: rtw_cfg80211_set_wpa_ie(): Avoid pointless memcpy

There is no point copying a buffer, just to scan it and then free it
again.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Move FillH2CCmd() prototype to rtl8723a_cmd.h where it really belongs

As an added bonus, remove the now obsolete rtw_ioctl_set.h

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Quiet unused variable warning when building with CONFIG_8723AU_AP_MODE=n

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Don't run regular scans in the driver, the stack handles that

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: rtw_set_802_11_bssid23a_list_scan(): Use __func__ to print function name

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Move rtw_get_cur_max_rate23a() to ioctl_cfg80211.c

This function has only one caller, so move it home and declare it static

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: rtw_get_cur_max_rate23a(): We are in N mode if WLAN_EID_HT_CAPABILITY is present

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: rtw_get_cur_max_rate23a(): Remove duplicate fwstate checks

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Move rtw_do_join23a() to rtw_mlme.c and declare it static

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: rtw_do_join23a(): Don't start scanning if network isn't found

Don't start running network scans if trying to connect to a network
not in our cache. Let the 802.11 stack do it's job instead.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: rtw_set_ssid(): Use rtw_do_join_network()

We already have the wlan_network we wish to join, hence it's pointless
to go back to the scanned_queue and pull it out of there, before
running the join logic.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: rtw_select_and_join_from_scanned_queue23a() never returns 2

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: rtw_surveydone_event_callback23a(): We always set _FW_UNDER_LINKING

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: to_join will no be true if _FW_LINKED is set

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Remove no-op rtw_get_encrypt_decrypt_from_registrypriv23a()

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Consolidate duplicate adhoc joining code into rtw_do_join_adhoc()

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: rtw_surveydone_event_callback23a(): Remove superfluous memset()

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: rtw_do_join23a(): Use __func__ to get function name in debug messages

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Introduce rtw_do_join_network()

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Introduce rtw_select_candidate_from_queue()

This splits a portion of rtw_select_and_join_from_scanned_queue23a()
into rtw_select_candidate_from_queue()

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Don't prepend debug console messages with 'ERROR '

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Minor debug message fixup

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: rtw_do_join23a(): Use correct error return values

Don't mix true/fail with _SUCCESS/_FAIL as return value

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: rtw_cfg80211_add_wep(): Use WLAN_KEY_LEN_*

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: rtw_set_ssid(): This is never called with _FW_UNDER_LINKING

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Pass a struct wlan_network to rtw_set_ssid()

There is no point copying the ssid out of struct wlan_network when we
can just pass on the whole struct.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: cfg80211_rtw_connect(): Simplify ssid preparation

Since we just matched sme->{ssid,ssid_len} to
pnetwork->network.Ssid.{ssid,ssid_len} we can simplify the copy and
move it to just before the call to rtw_set_ssid().

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: cfg80211_rtw_connect(): Remove obfuscating pointers

dst_ssid and dst_bssid were just obfuscating that we were in fact
looking at pnetwork.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: cfg80211_rtw_connect(): Clean up various bits

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Move rtw_set_802_11_ssid23a() to ioctl_cfg80211.c

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Fold rtw_set_802_11_authentication_mode23a() into cfg80211_rtw_connect()

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: cfg80211_rtw_connect(): Check correct return value from rtw_set_802_11_ssid23a()

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Make rtw_is_same_ibss23a() return bool

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Get rid of IW_ESSID_MAX_SIZE

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: OnAuth23a(): Use ether_addr_copy()

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: rtw_stadel_event_callback23a(): Remove superfluous memset()

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: free_scanqueue(): Use _rtw_free_network23a()

Use _rtw_free_network23() so elements are freed in one place.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: collect_bss_info(): Don't memset() what we just kzalloc()'d

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Allocate struct wlan_bssid_ex in collect_bss_info()

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Do not embed struct wlan_bssid_ex in struct survey_event

Instead allocate it separately and reference it from survey_event.
This will allow for us to pass it on later without having to copy it.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>