drm/atomic: Clean up update_connector_routing.

connector_state->crtc can no longer be unset by accident,
so that check can be removed. The other code open-codes
drm_atomic_get_existing_crtc_state, so use that.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Resolve tiny conflict due to gcc warning fix on previous
patch.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/atomic: Clean up steal_encoder, v2.

Now that only encoders can be stolen that are part of the state
steal_encoder no longer needs to inspect all connectors,
just those that are part of the atomic state.

Changes since v1:
- Change return value to void, can no longer fail.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Appease gcc, reported by kbuild.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1456996662-8704-7-git-send-email-maarten.lankhorst@linux.intel.com

drm/atomic: Handle encoder assignment conflicts in a separate check, v3.

The current check doesn't handle the case where we don't steal an
encoder, but keep it on the current connector. If we repurpose
disable_conflicting_encoders to do the checking, we just have
to reject the ones that conflict.

Changes since v1:
- Return early with empty encoder_mask, drm_for_each_connector
  requires connection_mutex held.
Changes since v2:
- Add comments for the loops.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Testcase: kms_setmode.invalid-clone-single-crtc-stealing
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1456996662-8704-6-git-send-email-maarten.lankhorst@linux.intel.com

drm/atomic: Handle encoder stealing from set_config better.

Instead of failing with -EINVAL when conflicting encoders are found,
the legacy set_config will disable other connectors when encoders
conflict.

With the previous commit this becomes a lot easier to implement.
set_config only adds connectors to the state that are modified,
and because of the previous commit that calls add_affected_connectors
only on set->crtc it means any connector not part of the modeset can
be stolen from. We disable the connector in that case, and possibly
the crtc if required.

Atomic modeset itself still doesn't allow encoder stealing, the results
would be too unpredictable.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1456996662-8704-5-git-send-email-maarten.lankhorst@linux.intel.com

drm/atomic: Always call steal_encoder, v2.

There's no need to have a separate function to get the crtc
which is stolen, this can already be found when actually
stealing the encoder.

drm_for_each_connector already checks for connection_mutex, so
use that macro now.

Changes since v1:
- Do not check for NULL crtc in connector_state,
  this may happen when a crtc is disabled and its encoder stolen.
- Because of this, use connector->state->crtc instead of conn_state->crtc.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1456996662-8704-4-git-send-email-maarten.lankhorst@linux.intel.com

drm/ast: removed optional dummy crtc mode_fixup function.

This patch set nukes all the dummy crtc mode_fixup implementations.
(made on top of Daniel topic/drm-misc branch)

Signed-off-by: Carlos Palminha <palminha@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/0f8f948babd93fce8523253b0f525446e2f565db.1455630967.git.palminha@synopsys.com

drm/bochs: removed optional dummy crtc mode_fixup function.

This patch set nukes all the dummy crtc mode_fixup implementations.
(made on top of Daniel topic/drm-misc branch)

Signed-off-by: Carlos Palminha <palminha@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/40a78cafba2cd5b391d244e806613192b3a31413.1455630967.git.palminha@synopsys.com

drm/fsl-dcu: removed optional dummy crtc mode_fixup function.

This patch set nukes all the dummy crtc mode_fixup implementations.
(made on top of Daniel topic/drm-misc branch)

Signed-off-by: Carlos Palminha <palminha@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/a9827a57b25509dae29c0e8d09a9063a11970647.1455630967.git.palminha@synopsys.com

drm/virtio: removed optional dummy crtc mode_fixup function.

This patch set nukes all the dummy crtc mode_fixup implementations.
(made on top of Daniel topic/drm-misc branch)

Signed-off-by: Carlos Palminha <palminha@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/ae865f0deca4e64a0f47f2d2d14b54ff00c0672e.1455630967.git.palminha@synopsys.com

drm/nouveau/dispnv04: removed optional dummy crtc mode_fixup function.

This patch set nukes all the dummy crtc mode_fixup implementations.
(made on top of Daniel topic/drm-misc branch)

Signed-off-by: Carlos Palminha <palminha@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/897eae438eec566078b1872d7654c4863e4e4e57.1455630967.git.palminha@synopsys.com

drm/atmel-hlcdc: remove optional dummy crtc mode_fixup function.

This patch set nukes all the dummy crtc mode_fixup implementations.
(made on top of Daniel topic/drm-misc branch)

Signed-off-by: Carlos Palminha <palminha@synopsys.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/e4bdb8552c245f8b73084b93da60460a00f7798c.1455630967.git.palminha@synopsys.com

drm/sti: removed optional dummy crtc mode_fixup function.

This patch set nukes all the dummy crtc mode_fixup implementations.
(made on top of Daniel topic/drm-misc branch)

Signed-off-by: Carlos Palminha <palminha@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/08d27e27582fb2daa48555ab542245c6cf0a2268.1455630967.git.palminha@synopsys.com

drm/shmobile: removed optional dummy crtc mode_fixup function.

This patch set nukes all the dummy crtc mode_fixup implementations.
(made on top of Daniel topic/drm-misc branch)

Signed-off-by: Carlos Palminha <palminha@synopsys.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/msm/mdp: removed optional dummy crtc mode_fixup function.

This patch set nukes all the dummy crtc mode_fixup implementations.
(made on top of Daniel topic/drm-misc branch)

Signed-off-by: Carlos Palminha <palminha@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/omapdrm: removed optional dummy crtc mode_fixup function.

This patch set nukes all the dummy crtc mode_fixup implementations.
(made on top of Daniel topic/drm-misc branch)

Signed-off-by: Carlos Palminha <palminha@synopsys.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/101f043d5fa747291c09ae765bac4d55c6e39988.1455630967.git.palminha@synopsys.com

drm/rcar-du: removed optional dummy crtc mode_fixup function.

This patch set nukes all the dummy crtc mode_fixup implementations.
(made on top of Daniel topic/drm-misc branch)

Signed-off-by: Carlos Palminha <palminha@synopsys.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/becab4ff666eca77162e5cd978087f2d3fb3e308.1455630967.git.palminha@synopsys.com

drm/gma: removed optional dummy crtc mode_fixup function.

This patch set nukes all the dummy crtc mode_fixup implementations.
(made on top of Daniel topic/drm-misc branch)

Signed-off-by: Carlos Palminha <palminha@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/udl: removed optional dummy crtc mode_fixup function.

This patch set nukes all the dummy crtc mode_fixup implementations.
(made on top of Daniel topic/drm-misc branch)

Signed-off-by: Carlos Palminha <palminha@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/11327d1a3c3b6623064f6d82efa96e7993f77f38.1455630967.git.palminha@synopsys.com

drm/mgag200: removed optional dummy crtc mode_fixup function.

This patch set nukes all the dummy crtc mode_fixup implementations.
(made on top of Daniel topic/drm-misc branch)

Signed-off-by: Carlos Palminha <palminha@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/3d089c84bcb1aafd485d4944ad472f9843c38eaf.1455630967.git.palminha@synopsys.com

drm/cirrus: removed optional dummy crtc mode_fixup function.

This patch set nukes all the dummy crtc mode_fixup implementations.
(made on top of Daniel topic/drm-misc branch)

Signed-off-by: Carlos Palminha <palminha@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/5a3c41fed15847549f9bdeae89b72705b4756cc4.1455630967.git.palminha@synopsys.com

drm/atomic: Pass connector and state to update_connector_routing.

Minor cleanup, connector and connector_state are always non-NULL here.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1456303053-28806-3-git-send-email-maarten.lankhorst@linux.intel.com

drm/atomic: Clean up update_output_state.

With the addition of crtc_state->connector_mask other connectors from
different crtc's aren't needed any more to determine if a crtc has
connectors, so only call add_affected_connectors on the target crtc.
This allows a cleanup to first remove all current connectors, then
add all set->connectors to the target crtc.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1456303053-28806-2-git-send-email-maarten.lankhorst@linux.intel.com

drm/crtc: Use drm_mode_object_put() in __drm_framebuffer_unregister()

The function __drm_framebuffer_unregister() has boilerplate code to drop idr
reference.  Let's replace it with drm_mode_object_put() to simplify the code.

Signed-off-by: Liu Ying <gnuiyl@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1456716070-2602-1-git-send-email-gnuiyl@gmail.com

Merge branch 'for-next' of git.agner.ch/git/linux-drm-fsl-dcu into drm-next

As previously discussed, this is my first pull request for the DCU DRM
driver along with the change in MAINTAINERS.
https://lkml.org/lkml/2016/1/7/26

The pull contains some code cleanup changes (e.g. removing all error
handling for the regmap calls) and several fixes.

* 'for-next' of http://git.agner.ch/git/linux-drm-fsl-dcu:
  drm/fsl-dcu: fix register initialization
  drm/fsl-dcu: use mode flags for hsync/vsync polarity
  drm/fsl-dcu: fix alpha blending
  drm/fsl-dcu: mask all interrupts on initialization
  drm/fsl-dcu: handle initialization errors properly
  drm/fsl-dcu: avoid memory leak on errors
  drm/fsl-dcu: remove regmap return value checks
  drm/fsl-dcu: specify volatile registers
  drm: fsl-dcu: Fix no fb check bug
  MAINTAINERS: update for Freescale DCU DRM driver

drm/fsl-dcu: fix register initialization

The layer enumeration start with 0 (0-15 for LS1021a and 0-63 for
Vybrid) whereas the register enumeration start from 1 (1-10 for
LS1021a and 1-9 for Vybrid). The loop started off from 0 for both
iterations and initialized the number of layers inclusive, which
is one layer too many.

All extensively written registers seem to be unassigned, it seems
that the write to those registers did not do any harm in practice.

Signed-off-by: Stefan Agner <stefan@agner.ch>

drm/fsl-dcu: use mode flags for hsync/vsync polarity

The current default configuration is as follows:
- Invert VSYNC signal (active LOW)
- Invert HSYNC signal (active LOW)

The mode flags allow to specify the required polarity per
mode. Furthermore, none of the current driver settings is
actually a standard polarity.

This patch applies the current driver default polarities as
explicit flags to the display which has been introduced with
the driver (NEC WQVGA "nec,nl4827hc19-05b"). The driver now
also parses the flags field and applies the configuration
accordingly, by using the following values as standard
polarities: (e.g. when no flags are specified):
- VSYNC signal not inverted (active HIGH)
- HSYNC signal not inverted (active HIGH)

Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>

drm/fsl-dcu: fix alpha blending

Fix alpha blending by enabling alpha blending for the whole frame if
a color mode with alpha channel is selected (DRM_FORMAT_ARGB*). Also
support color modes without alpha channel (DRM_FORMAT_XRGB*) by just
not enabling alpha blending on layer level.

Signed-off-by: Stefan Agner <stefan@agner.ch>

drm/fsl-dcu: mask all interrupts on initialization

The state of the interrupt mask register on initialization is
unknown, e.g. U-Boot could already used the DCU. So depending on
the boot loader, the outcome of the interrupt mask register could
be different. A defined state is much more preferable. Also, there
is no value in keeping interrupts enabled which we don't need.
Therefor, mask all interrupts on initialization.

Signed-off-by: Stefan Agner <stefan@agner.ch>

drm/fsl-dcu: handle initialization errors properly

If initialization fails (e.g. due to missing panel node or deferred
probe) make sure to roll-back all operations and return the error
code.

Signed-off-by: Stefan Agner <stefan@agner.ch>

drm/fsl-dcu: avoid memory leak on errors

Improve error handling during CRTC initialization. Especially avoid
memory leaks in the primary plane initialization error path.

Signed-off-by: Stefan Agner <stefan@agner.ch>

drm/fsl-dcu: remove regmap return value checks

It is not common to do regmap return value checks, especially not
for memory mapped device. We can rule out most error returns since
the conditions are static and we know they are ok (e.g. offset
aligned to register stride). Also without proper error handling
they are not really valuable for the user. Hence remove most of
them.

The check in the interrupt handler is worth keeping since a
volatile register won't be readable in case register caching is
still enabled.

Signed-off-by: Stefan Agner <stefan@agner.ch>

drm/fsl-dcu: specify volatile registers

Since we are using cached registers, we need to specify volatile
registers explicitly to avoid reading their value from the cache.
This allows to read the correct interrupt status in fsl_dcu_drm_irq
and clear the asserted bits only.

Signed-off-by: Stefan Agner <stefan@agner.ch>

drm: fsl-dcu: Fix no fb check bug

For state->fb or state->crtc may be NULL in fsl_dcu_drm_plane_atomic_check
function, if so, return 0.

Signed-off-by: Meng Yi <meng.yi@nxp.com>
Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>

MAINTAINERS: update for Freescale DCU DRM driver

Promote myself as new maintainer of the Freescale DCU DRM driver.

Acked-by: Jianwei Wang <jianwei.wang.chn@gmail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>

Merge branch 'drm/next/du' of git://linuxtv.org/pinchartl/fbdev into drm-next

rcar-du updates.

* 'drm/next/du' of git://linuxtv.org/pinchartl/fbdev: (281 commits)
  drm: rcar-du: Add tri-planar memory formats support
  drm: rcar-du: Add probe deferral debug messages
  drm: rcar-du: lvds: Add R-Car Gen3 support
  drm: rcar-du: lvds: Rename PLLEN bit to PLLON
  drm: rcar-du: lvds: Fix PLL frequency-related configuration
  drm: rcar-du: lvds: Avoid duplication of clock clamp code
  drm: rcar-du: Add R8A7795 device support
  drm: rcar-du: Output the DISP signal on the ODDF pin
  drm: rcar-du: Output the DISP signal on the DISP pin
  drm: rcar-du: Support up to 4 CRTCs
  drm: rcar-du: Drop LVDS double dependency on OF
  drm: rcar-du: Enable compilation on ARM64
  drm: rcar-du: Fix compile warning on 64-bit platforms
  drm: rcar-du: Expose the VSP1 compositor through KMS planes
  drm: rcar-du: Move plane allocator to rcar_du_plane.c
  drm: rcar-du: Restart the DU group when a plane source changes
  drm: rcar-du: Add VSP1 compositor support
  drm: rcar-du: Add VSP1 support to the planes allocator
  drm: rcar-du: Refactor plane setup
  drm: rcar-du: Compute plane DDCR4 register value directly
  ...

drm: rcar-du: Add tri-planar memory formats support

Those formats are supported on Gen3 only.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

drm: rcar-du: Add probe deferral debug messages

Print a message when the HDMI I2C slave encoder can't be found to help
debugging probe deferral issues.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

drm: rcar-du: lvds: Add R-Car Gen3 support

The LVDS encoder differs slightly in Gen3 SoCs in its PLL configuration.
Add support for the Gen3 LVDS PLL parameters and startup procedure.

Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

drm: rcar-du: lvds: Rename PLLEN bit to PLLON

The bit is named PLLON in the datasheet, rename it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

drm: rcar-du: lvds: Fix PLL frequency-related configuration

The frequency checks don't match the datasheet, fix them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

drm: rcar-du: lvds: Avoid duplication of clock clamp code

Replace the duplicate code by a single central function.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

drm: rcar-du: Add R8A7795 device support

Document the R8A7795-specific DT bindings and support them in the
driver. The HDMI and LVDS outputs are currently not supported.

Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

drm: rcar-du: Output the DISP signal on the ODDF pin

The ODDF signal, output by default on the ODDF pin, isn't used on any
board supported in the kernel. As the Gen3 Salvator-X board uses the
ODDF pin as a DISP signal, hardcode that configuration in the driver.

Use of the ODDF signal will be implemented later through proper DT-based
configuration of the DU pins.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

drm: rcar-du: Output the DISP signal on the DISP pin

The DE signal is currently configured to be identical to the DISP
signal and is used for the same purpose. To make it clearer that the
DISP pin outputs the DISP signal, select it explicitly.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

drm: rcar-du: Support up to 4 CRTCs

The Gen3 R8A7795 DU has 4 CRTCs, support them all.

Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

drm: rcar-du: Drop LVDS double dependency on OF

LVDS support depends on DRM_RCAR_DU which already depends on OF. Drop
the explicit dependency.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

drm: rcar-du: Enable compilation on ARM64

The R8A7795 SoC is ARM64-based and include a DU. Enable driver
compilation on ARM64.

Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

drm: rcar-du: Fix compile warning on 64-bit platforms

Use %tu instead of %u to print difference between pointers.

Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

drm: rcar-du: Expose the VSP1 compositor through KMS planes

On R-Car Gen3 SoCs the DU lost its ability to access memory directly and
needs to work in conjunction with the VSP to do so. This commit handles
the VSP internally to hide it from the user.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

drm: rcar-du: Move plane allocator to rcar_du_plane.c

The plane allocator is specific to DU planes and won't be used for
VSP-based planes, move it with the rest of the DU planes code where it
belongs.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

drm: rcar-du: Restart the DU group when a plane source changes

Plane sources are configured by the VSPS bit in the PnDDCR4 register.
Although the datasheet states that the bit is updated during vertical
blanking, it seems that updates only occur when the DU group is held in
reset through the DSYSR.DRES bit. Restart the group if the source
changes.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

drm: rcar-du: Add VSP1 compositor support

Configure the plane source at plane setup time to source frames from
memory or from the VSP1.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

drm: rcar-du: Add VSP1 support to the planes allocator

The R8A7790 DU can source frames directly from the VSP1 devices VSPD0
and VSPD1. VSPD0 feeds DU0/1 plane 0, and VSPD1 feeds either DU2 plane 0
or DU0/1 plane 1.

Allocate the correct fixed plane when sourcing frames from VSPD0 or
VSPD1, and allocate planes in reverse index order otherwise to ensure
maximum availability of planes 0 and 1.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

drm: rcar-du: Refactor plane setup

Rename plane setup functions using more explicit names, and use local
variables to store intermediate values to increase readability. This
also prepares for VSP compositor support.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

drm: rcar-du: Compute plane DDCR4 register value directly

There's no need for a read-modify-write pattern, all register bits can
be set explicitly.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

drm: rcar-du: Don't update planes on disabled CRTCs

A disabled CRTC can't display planes, the driver shouldn't try to
configure it when updating planes. The DRM core will store the plane
state for us, and the plane will be configured appropriately the next
time the CRTC is enabled.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

drm: rcar-du: Remove local CRTC enabled state

The atomic framework guarantees that the CRTC enable and disable
functions will only be called when needed, there's no need to duplicate
the CRTC state check. By replacing the local CRTC enabled state check at
resume time with the CRTC active state we can remove the local CRTC
enabled state altogether.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

drm: rcar-du: Perform initialization/cleanup at probe/remove time

The drm driver .load() operation is prone to race conditions as it
initializes the driver after registering the device nodes. Its usage is
deprecated, inline it in the probe function and call drm_dev_alloc() and
drm_dev_register() explicitly.

For consistency inline the .unload() handler in the remove function as
well.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Merge remote-tracking branch 'linuxtv/vsp1' into HEAD

[media] vsp1_drm.h: add missing prototypes

drivers/media/platform/vsp1/vsp1_drm.c:47:5: warning: no previous prototype for 'vsp1_du_init' [-Wmissing-prototypes]
 int vsp1_du_init(struct device *dev)
     ^
drivers/media/platform/vsp1/vsp1_drm.c:76:5: warning: no previous prototype for 'vsp1_du_setup_lif' [-Wmissing-prototypes]
 int vsp1_du_setup_lif(struct device *dev, unsigned int width,
     ^
drivers/media/platform/vsp1/vsp1_drm.c:221:6: warning: no previous prototype for 'vsp1_du_atomic_begin' [-Wmissing-prototypes]
 void vsp1_du_atomic_begin(struct device *dev)
      ^
drivers/media/platform/vsp1/vsp1_drm.c:273:5: warning: no previous prototype for 'vsp1_du_atomic_update' [-Wmissing-prototypes]
 int vsp1_du_atomic_update(struct device *dev, unsigned int rpf_index,
     ^
drivers/media/platform/vsp1/vsp1_drm.c:451:6: warning: no previous prototype for 'vsp1_du_atomic_flush' [-Wmissing-prototypes]
 void vsp1_du_atomic_flush(struct device *dev)
      ^

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l: vsp1: Configure device based on IP version

The IP version number carries enough information to identify the exact
device instance features. Drop the related DT properties and use the IP
version instead.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l: vsp1: Add display list support

Display lists contain lists of registers and associated values to be
applied atomically by the hardware. They lower the pressure on interrupt
processing delays when reprogramming the device as settings can be
prepared well in advance and queued to the hardware without waiting for
the end of the current frame.

Display list support is currently limited to the DRM pipeline.

Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l: vsp1: Add support for the R-Car Gen3 VSP2

Add DT compatible strings for the VSP2 instances found in the R-Car Gen3
SoCs and support them in the vsp1 driver.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l: vsp1: Implement atomic update for the DRM driver

Add two API functions named vsp1_du_atomic_begin() and
vsp1_du_atomic_flush() to signal the start and end of an atomic update.
The vsp1_du_setup_rpf() function is renamed to vsp1_du_atomic_update()
for consistency.

With this new API, the driver will reprogram all modified inputs
atomically before restarting the video stream.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l: vsp1: Disconnect unused RPFs from the DRM pipeline

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l: vsp1: Add VSP+DU support

Implement internal control of the VSP pipeline to be used by the DU
DRM/KMS driver when using the VSP as an internal composer handled
through DRM/KMS only.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l: vsp1: Don't validate links when the userspace API is disabled

As the pipeline is configured internally by the driver when the
userspace API is disabled its configuration can be trusted and link
validation isn't needed.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l: vsp1: Set the alpha value manually in RPF and WPF s_stream handlers

The RPF and WPF alpha values are set through V4L2 controls and applied
when starting the video stream by a call to v4l2_ctrl_handler_setup().
As that function uses the control handler mutex it can't be called in
interrupt context, where the VSP+DU pipeline handler might need to
reconfigure the pipeline.

Set the alpha value manually in the RPF and WPF s_stream handler to
ensure that the hardware is properly configured even when controlled
without the userspace API. If the userspace API is enabled protect that
with the control lock to avoid race conditions with userspace.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l: vsp1: Make pipeline inputs array index by RPF index

The pipeline inputs array stores pointers to all RPFs contained in the
pipeline. It's currently indexed contiguously by adding RPFs in the
order they are found during graph walk. This can't easily support
dynamic addition and removal of RPFs while streaming, which will be
required for combined VSP+DU support.

Make the array indexed by RPF index instead and skip NULL elements when
iterating over RPFs.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l: vsp1: Make the userspace API optional

The R-Car Gen3 SoCs include VSP instances dedicated to the DU that will
be controlled entirely by the rcar-du-drm driver through the KMS API. To
support that use case make the userspace V4L2 API optional.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l: vsp1: Move format info to vsp1_pipe.c

Format information and the related helper function are not specific to
the V4L2 API, move them from vsp1_video.c to vsp1_pipe.c.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l: vsp1: Make the BRU optional

Not all VSP instances have a BRU on R-Car Gen3, make it optional. Set
the feature unconditionally for now, this will be fixed when adding Gen3
support.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l: vsp1: Make number of BRU inputs configurable

The R-Car Gen3 family has 5-inputs BRUs, support them by making the
number of BRU inputs configurable.

As the driver assumes that the number of BRU inputs is equal to the
number of RPFs, replace the BRU_MAX_INPUTS macro with VSP1_MAX_RPF to
make the assumption apparent.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l: vsp1: Move entity route setup function to vsp1_entity.c

The function will be used by the DU code, move it out of vsp1_video.c.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l: vsp1: Remove unused module read functions

Several module read functions are not used, remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l: vsp1: Set the SRU CTRL0 register when starting the stream

Commit 58f896d859ce ("[media] v4l: vsp1: sru: Make the intensity
controllable during streaming") refactored the stream start code and
removed the SRU CTRL0 register write by mistake. Add it back.

Fixes: 58f896d859ce ("[media] v4l: vsp1: sru: Make the intensity controllable during streaming")

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l: vsp1: Fix typo in VI6_DISP_IRQ_STA_DST register bit name

Rename the VI6_DISP_IRQ_STA_DSE register bit to VI6_DISP_IRQ_STA_DST to
fix a typo and match the datasheet.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l: vsp1: Document the vsp1_pipeline structure

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l: vsp1: Extract link creation to separate function

Link creation will be handled differently for the DU pipeline.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l: vsp1: Reuse local variable instead of recomputing it

No need to waste CPU cycles when the value we need is already available.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l: vsp1: Extract pipeline initialization code into a function

The code will be reused outside of vsp1_video.c.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l: vsp1: Rename video pipeline functions to use vsp1_video prefix

Those functions are specific to video nodes, rename them for
consistency.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l: vsp1: Split pipeline management code from vsp1_video.c

The code will be used to control the vsp1 driver from the DU driver
without using video nodes.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l: vsp1: Decouple pipeline end of frame processing from vsp1_video

To make the pipeline structure and operations usable without video
devices the frame end processing must be decoupled from struct
vsp1_video. Implement this by calling the video frame end function
indirectly through a function pointer in struct vsp1_pipeline.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l: vsp1: Remove struct vsp1_pipeline num_video field

The field is always equal to the num_inputs field plus one, remove the
duplicate.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l: vsp1: Move vsp1_video pointer from vsp1_entity to vsp1_rwpf

Only RPFs and WPFs can be associated with video nodes, don't waste
memory by storing the video pointer in all entities.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l: vsp1: Support VSP1 instances without any UDS

Not all VSP1 instances include a UDS. Make the renesas,#uds DT property
optional and accept a number of UDS equal to 0 as valid.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l: vsp1: Make rwpf operations independent of video device

The rwpf queue operation doesn't queue a buffer but sets the memory
address for the next run. Rename it to set_memory and pass it a new
structure independent of the video buffer than only contains memory
information.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l: vsp1: Move video device out of struct vsp1_rwpf

To make the video device nodes optional we need to decouple the [rw]pf
instances from the video devices. Move video devices out of struct
vsp1_rwpf and instantiate them dynamically in the core driver code.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l: vsp1: Rename vsp1_video_buffer to vsp1_vb2_buffer

The structure represent a vsp1 videobuf2 buffer, name it accordingly.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l: vsp1: Move video operations to vsp1_rwpf

This removes the dependency of vsp1_rpf and vsp1_wpf on vsp1_video,
making it possible to reuse the operations without a V4L2 video device
node.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l: vsp1: Store the memory format in struct vsp1_rwpf

Move the format from struct vsp1_video to struct vsp1_rwpf to prepare
for VSPD KMS support that will not instantiate V4L2 video device nodes.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l: vsp1: Change the type of the rwpf field in struct vsp1_video

The rwpf field contains a pointer to the rpf or wpf associated with the
video node. Instead of storing it as a vsp1_entity, store the
corresponding vsp1_rwpf pointer to allow accessing the vsp1_rwpf fields
directly.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l: vsp1: Group all link creation code in a single file

There's no need to spread the code across multiple source files.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l: vsp1: Add tri-planar memory formats support

Tri-planar memory formats store the Y, U and V components in separate
planes. The VSP hardware supports them, the driver now does too.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l: Add YUV 4:2:2 and YUV 4:4:4 tri-planar non-contiguous formats

The formats use three planes through the multiplanar API, allowing for
non-contiguous planes in memory.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] media: ti-vpe: cal: Fix syntax check warnings

Fix the following sparse warnings:

ti-vpe/cal.c:387:26: warning: incorrect type in return expression (different address spaces)
ti-vpe/cal.c:459:26: warning: incorrect type in return expression (different address spaces)
ti-vpe/cal.c:503:27: warning: incorrect type in argument 6 (different address spaces)
ti-vpe/cal.c:509:47: warning: incorrect type in argument 6 (different address spaces)
ti-vpe/cal.c:518:47: warning: incorrect type in argument 6 (different address spaces)
ti-vpe/cal.c:526:31: warning: incorrect type in argument 6 (different address spaces)
ti-vpe/cal.c:1807:24: warning: Using plain integer as NULL pointer
ti-vpe/cal.c:1844:16: warning: Using plain integer as NULL pointer

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] s5p-mfc: add the support of V4L2_CID_MPEG_VIDEO_FORCE_KEY_FRAME

There is a new control V4L2_CID_MPEG_VIDEO_FORCE_KEY_FRAME to
force an encoder key frame. It is the same as requesting
V4L2_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE_I_FRAME.

Signed-off-by: Wu-Cheng Li <wuchengli@chromium.org>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l: add V4L2_CID_MPEG_VIDEO_FORCE_KEY_FRAME

Some drivers also need a control like
V4L2_CID_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE to force an encoder
key frame. Add a general V4L2_CID_MPEG_VIDEO_FORCE_KEY_FRAME
so the new drivers and applications can use it.

Signed-off-by: Wu-Cheng Li <wuchengli@chromium.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] saa7134: Fix bytesperline not being set correctly for planar formats

bytesperline should be the bytesperline for the first plane for planar
formats, not that of all planes combined.

This fixes a crash in xawtv caused by the wrong bpl.

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1305389
Reported-and-tested-by: Stas Sergeev <stsp@list.ru>
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>