git.stricted.de - GitHub/LineageOS/android_kernel_motorola

spi: Fix double IDR allocation with DT aliases

commit 04b2d03a75652bda989de1595048f0501dc0c0a0 upstream.

If the SPI bus number is provided by a DT alias, idr_alloc() is called
twice, leading to:

WARNING: CPU: 1 PID: 1 at drivers/spi/spi.c:2179 spi_register_controller+0x11c/0x5d8
couldn't get idr

Fix this by moving the handling of fixed SPI bus numbers up, before the
DT handling code fills in ctlr->bus_num.

Fixes: 1a4327fbf4554d5b ("spi: fix IDR collision on systems with both fixed and dynamic SPI bus numbers")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Kirill Kapranov <kirill.kapranov@compulab.co.il>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tick/nohz: Prevent bogus softirq pending warning

Commit 0a0e0829f990 ("nohz: Fix missing tick reprogram when interrupting an
inline softirq") got backported to stable trees and now causes the NOHZ
softirq pending warning to trigger. It's not an upstream issue as the NOHZ
update logic has been changed there.

The problem is when a softirq disabled section gets interrupted and on
return from interrupt the tick/nohz state is evaluated, which then can
observe pending soft interrupts. These soft interrupts are legitimately
pending because they cannot be processed as long as soft interrupts are
disabled and the interrupted code will correctly process them when soft
interrupts are reenabled.

Add a check for softirqs disabled to the pending check to prevent the
warning.

Reported-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reported-by: John Crispin <john@phrozen.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: John Crispin <john@phrozen.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: stable@vger.kernel.org
Fixes: 2d898915ccf4838c ("nohz: Fix missing tick reprogram when interrupting an inline softirq")
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>

iw_cxgb4: only allow 1 flush on user qps

commit 308aa2b8f7b7db3332a7d41099fd37851fb793b2 upstream.

Once the qp has been flushed, it cannot be flushed again. The user qp
flush logic wasn't enforcing it however. The bug can cause
touch-after-free crashes like:

Unable to handle kernel paging request for data at address 0x000001ec
Faulting instruction address: 0xc008000016069100
Oops: Kernel access of bad area, sig: 11 [#1]
...
NIP [c008000016069100] flush_qp+0x80/0x480 [iw_cxgb4]
LR [c00800001606cd6c] c4iw_modify_qp+0x71c/0x11d0 [iw_cxgb4]
Call Trace:
[c00800001606cd6c] c4iw_modify_qp+0x71c/0x11d0 [iw_cxgb4]
[c00800001606e868] c4iw_ib_modify_qp+0x118/0x200 [iw_cxgb4]
[c0080000119eae80] ib_security_modify_qp+0xd0/0x3d0 [ib_core]
[c0080000119c4e24] ib_modify_qp+0xc4/0x2c0 [ib_core]
[c008000011df0284] iwcm_modify_qp_err+0x44/0x70 [iw_cm]
[c008000011df0fec] destroy_cm_id+0xcc/0x370 [iw_cm]
[c008000011ed4358] rdma_destroy_id+0x3c8/0x520 [rdma_cm]
[c0080000134b0540] ucma_close+0x90/0x1b0 [rdma_ucm]
[c000000000444da4] __fput+0xe4/0x2f0

So fix flush_qp() to only flush the wq once.

Cc: stable@vger.kernel.org
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vmw_balloon: include asm/io.h

commit a3b92ee6fc171d7c9d9b6b829b7fef169210440c upstream.

Fix a build error due to missing virt_to_phys()

Reported-by: kbuild test robot <lkp@intel.com>
Fixes: f0a1bf29d821b ("vmw_balloon: fix inflation with batching")
Cc: stable@vger.kernel.org
Cc: Xavier Deguillard <xdeguillard@vmware.com>
Signed-off-by: Nadav Amit <namit@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: aardvark: Size bridges before resources allocation

commit 91a2968e245d6ba616db37001fa1a043078b1a65 upstream.

The PCIE I/O and MEM resource allocation mechanism is that root bus
goes through the following steps:

1. Check PCI bridges' range and computes I/O and Mem base/limits.

2. Sort all subordinate devices I/O and MEM resource requirements and
allocate the resources and writes/updates subordinate devices'
requirements to PCI bridges I/O and Mem MEM/limits registers.

Currently, PCI Aardvark driver only handles the second step and lacks
the first step, so there is an I/O and MEM resource allocation failure
when using a PCI switch. This commit fixes that by sizing bridges
before doing the resource allocation.

Fixes: 8c39d710363c1 ("PCI: aardvark: Add Aardvark PCI host controller
driver")
Signed-off-by: Zachary Zhang <zhangzg@marvell.com>
[Thomas: edit commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched/fair: Fix vruntime_normalized() for remote non-migration wakeup

commit d0cdb3ce8834332d918fc9c8ff74f8a169ec9abe upstream.

When a task which previously ran on a given CPU is remotely queued to
wake up on that same CPU, there is a period where the task's state is
TASK_WAKING and its vruntime is not normalized. This is not accounted
for in vruntime_normalized() which will cause an error in the task's
vruntime if it is switched from the fair class during this time.

For example if it is boosted to RT priority via rt_mutex_setprio(),
rq->min_vruntime will not be subtracted from the task's vruntime but
it will be added again when the task returns to the fair class. The
task's vruntime will have been erroneously doubled and the effective
priority of the task will be reduced.

Note this will also lead to inflation of all vruntimes since the doubled
vruntime value will become the rq's min_vruntime when other tasks leave
the rq. This leads to repeated doubling of the vruntime and priority
penalty.

Fix this by recognizing a WAKING task's vruntime as normalized only if
sched_remote_wakeup is true. This indicates a migration, in which case
the vruntime would have been normalized in migrate_task_rq_fair().

Based on a similar patch from John Dias <joaodias@google.com>.

Suggested-by: Peter Zijlstra <peterz@infradead.org>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Steve Muckle <smuckle@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Chris Redpath <Chris.Redpath@arm.com>
Cc: John Dias <joaodias@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Miguel de Dios <migueldedios@google.com>
Cc: Morten Rasmussen <Morten.Rasmussen@arm.com>
Cc: Patrick Bellasi <Patrick.Bellasi@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Todd Kjos <tkjos@google.com>
Cc: kernel-team@android.com
Fixes: b5179ac70de8 ("sched/fair: Prepare to fix fairness problems on migration")
Link: http://lkml.kernel.org/r/20180831224217.169476-1-smuckle@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: show test_dummy_encryption mount option in /proc/mounts

commit 338affb548c243d2af25b1ca628e67819350de6b upstream.

When in effect, add "test_dummy_encryption" to _ext4_show_options() so
that it is shown in /proc/mounts and other relevant procfs files.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: don't mark mmp buffer head dirty

commit fe18d649891d813964d3aaeebad873f281627fbc upstream.

Marking mmp bh dirty before writing it will make writeback
pick up mmp block later and submit a write, we don't want the
duplicate write as kmmpd thread should have full control of
reading and writing the mmp block.
Another reason is we will also have random I/O error on
the writeback request when blk integrity is enabled, because
kmmpd could modify the content of the mmp block(e.g. setting
new seq and time) while the mmp block is under I/O requested
by writeback.

Signed-off-by: Li Dongyang <dongyangli@ddn.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix online resizing for bigalloc file systems with a 1k block size

commit 5f8c10936fab2b69a487400f2872902e597dd320 upstream.

An online resize of a file system with the bigalloc feature enabled
and a 1k block size would be refused since ext4_resize_begin() did not
understand s_first_data_block is 0 for all bigalloc file systems, even
when the block size is 1k.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix online resize's handling of a too-small final block group

commit f0a459dec5495a3580f8d784555e6f8f3bf7f263 upstream.

Avoid growing the file system to an extent so that the last block
group is too small to hold all of the metadata that must be stored in
the block group.

This problem can be triggered with the following reproducer:

umount /mnt
mke2fs -F -m0 -b 4096 -t ext4 -O resize_inode,^has_journal \
-E resize=1073741824 /tmp/foo.img 128M
mount /tmp/foo.img /mnt
truncate --size 1708M /tmp/foo.img
resize2fs /dev/loop0 295400
umount /mnt
e2fsck -fy /tmp/foo.img

Reported-by: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: recalucate superblock checksum after updating free blocks/inodes

commit 4274f516d4bc50648a4d97e4f67ecbd7b65cde4a upstream.

When mounting the superblock, ext4_fill_super() calculates the free
blocks and free inodes and stores them in the superblock.  It's not
strictly necessary, since we don't use them any more, but it's nice to
keep them roughly aligned to reality.

Since it's not critical for file system correctness, the code doesn't
call ext4_commit_super().  The problem is that it's in
ext4_commit_super() that we recalculate the superblock checksum.  So
if we're not going to call ext4_commit_super(), we need to call
ext4_superblock_csum_set() to make sure the superblock checksum is
consistent.

Most of the time, this doesn't matter, since we end up calling
ext4_commit_super() very soon thereafter, and definitely by the time
the file system is unmounted.  However, it doesn't work in this
sequence:

mke2fs -Fq -t ext4 /dev/vdc 128M
mount /dev/vdc /vdc
cp xfstests/git-versions /vdc
godown /vdc
umount /vdc
mount /dev/vdc
tune2fs -l /dev/vdc

With this commit, the "tune2fs -l" no longer fails.

Reported-by: Chengguang Xu <cgxu519@gmx.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: avoid arithemetic overflow that can trigger a BUG

commit bcd8e91f98c156f4b1ebcfacae675f9cfd962441 upstream.

A maliciously crafted file system can cause an overflow when the
results of a 64-bit calculation is stored into a 32-bit length
parameter.

https://bugzilla.kernel.org/show_bug.cgi?id=200623

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reported-by: Wen Xu <wen.xu@gatech.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: avoid divide by zero fault when deleting corrupted inline directories

commit 4d982e25d0bdc83d8c64e66fdeca0b89240b3b85 upstream.

A specially crafted file system can trick empty_inline_dir() into
reading past the last valid entry in a inline directory, and then run
into the end of xattr marker. This will trigger a divide by zero
fault. Fix this by using the size of the inline directory instead of
dir->i_size.

Also clean up error reporting in __ext4_check_dir_entry so that the
message is clearer and more understandable --- and avoids the division
by zero trap if the size passed in is zero. (I'm not sure why we
coded it that way in the first place; printing offset % size is
actually more confusing and less useful.)

https://bugzilla.kernel.org/show_bug.cgi?id=200933

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reported-by: Wen Xu <wen.xu@gatech.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: check to make sure the rename(2)'s destination is not freed

commit b50282f3241acee880514212d88b6049fb5039c8 upstream.

If the destination of the rename(2) system call exists, the inode's
link count (i_nlinks) must be non-zero. If it is, the inode can end
up on the orphan list prematurely, leading to all sorts of hilarity,
including a use-after-free.

https://bugzilla.kernel.org/show_bug.cgi?id=200931

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reported-by: Wen Xu <wen.xu@gatech.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: vt_ioctl: fix potential Spectre v1

commit e97267cb4d1ee01ca0929638ec0fcbb0904f903d upstream.

vsa.console is indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.

This issue was detected with the help of Smatch:

drivers/tty/vt/vt_ioctl.c:711 vt_ioctl() warn: potential spectre issue
'vc_cons' [r]

Fix this by sanitizing vsa.console before using it to index vc_cons

Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].

[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2

Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: add new polaris pci id

commit 30f3984ede683b98a4e8096e200df78bf0609b4f upstream.

Add new pci id.

Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm: udl: Destroy framebuffer only if it was initialized

commit fcb74da1eb8edd3a4ef9b9724f88ed709d684227 upstream.

This fixes a NULL pointer dereference that can happen if the UDL
driver is unloaded before the framebuffer is initialized. This can
happen e.g. if the USB device is unplugged right after it was plugged
in.

As explained by Stéphane Marchesin:

It happens when fbdev is disabled (which is the case for Chrome OS).
Even though intialization of the fbdev part is optional (it's done in
udlfb_create which is the callback for fb_probe()), the teardown isn't
optional (udl_driver_unload -> udl_fbdev_cleanup ->
udl_fbdev_destroy).

Note that udl_fbdev_cleanup *tries* to be conditional (you can see it
does if (!udl->fbdev)) but that doesn't work, because udl->fbdev is
always set during udl_fbdev_init.

Cc: stable@vger.kernel.org
Suggested-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Emil Lundmark <lndmrk@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180528142711.142466-1-lndmrk@chromium.org
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vc4: Fix the "no scaling" case on multi-planar YUV formats

commit 658d8cbd07dae22ccecf49399e18c609c4e85c53 upstream.

When there's no scaling requested ->is_unity should be true no matter
the format.

Also, when no scaling is requested and we have a multi-planar YUV
format, we should leave ->y_scaling[0] to VC4_SCALING_NONE and only
set ->x_scaling[0] to VC4_SCALING_PPF.

Doing this fixes an hardly visible artifact (seen when using modetest
and a rather big overlay plane in YUV420).

Fixes: fc04023fafec ("drm/vc4: Add support for YUV planes.")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180725122907.13702-1-boris.brezillon@bootlin.com
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/drm/nouveau: Prevent handling ACPI HPD events too early

commit 79e765ad665da4b8aa7e9c878bd2fef837f6fea5 upstream.

On most systems with ACPI hotplugging support, it seems that we always
receive a hotplug event once we re-enable EC interrupts even if the GPU
hasn't even been resumed yet.

This can cause problems since even though we schedule hpd_work to handle
connector reprobing for us, hpd_work synchronizes on
pm_runtime_get_sync() to wait until the device is ready to perform
reprobing. Since runtime suspend/resume callbacks are disabled before
the PM core calls ->suspend(), any calls to pm_runtime_get_sync() during
this period will grab a runtime PM ref and return immediately with
-EACCES. Because we schedule hpd_work from our ACPI HPD handler, and
hpd_work synchronizes on pm_runtime_get_sync(), this causes us to launch
a connector reprobe immediately even if the GPU isn't actually resumed
just yet. This causes various warnings in dmesg and occasionally, also
prevents some displays connected to the dedicated GPU from coming back
up after suspend. Example:

usb 1-4: USB disconnect, device number 14
usb 1-4.1: USB disconnect, device number 15
WARNING: CPU: 0 PID: 838 at drivers/gpu/drm/nouveau/include/nvkm/subdev/i2c.h:170 nouveau_dp_detect+0x17e/0x370 [nouveau]
CPU: 0 PID: 838 Comm: kworker/0:6 Not tainted 4.17.14-201.Lyude.bz1477182.V3.fc28.x86_64 #1
Hardware name: LENOVO 20EQS64N00/20EQS64N00, BIOS N1EET77W (1.50 ) 03/28/2018
Workqueue: events nouveau_display_hpd_work [nouveau]
RIP: 0010:nouveau_dp_detect+0x17e/0x370 [nouveau]
RSP: 0018:ffffa15143933cf0 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff8cb4f656c400 RCX: 0000000000000000
RDX: ffffa1514500e4e4 RSI: ffffa1514500e4e4 RDI: 0000000001009002
RBP: ffff8cb4f4a8a800 R08: ffffa15143933cfd R09: ffffa15143933cfc
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8cb4fb57a000
R13: ffff8cb4fb57a000 R14: ffff8cb4f4a8f800 R15: ffff8cb4f656c418
FS: 0000000000000000(0000) GS:ffff8cb51f400000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f78ec938000 CR3: 000000073720a003 CR4: 00000000003606f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
? _cond_resched+0x15/0x30
nouveau_connector_detect+0x2ce/0x520 [nouveau]
? _cond_resched+0x15/0x30
? ww_mutex_lock+0x12/0x40
drm_helper_probe_detect_ctx+0x8b/0xe0 [drm_kms_helper]
drm_helper_hpd_irq_event+0xa8/0x120 [drm_kms_helper]
nouveau_display_hpd_work+0x2a/0x60 [nouveau]
process_one_work+0x187/0x340
worker_thread+0x2e/0x380
? pwq_unbound_release_workfn+0xd0/0xd0
kthread+0x112/0x130
? kthread_create_worker_on_cpu+0x70/0x70
ret_from_fork+0x35/0x40
Code: 4c 8d 44 24 0d b9 00 05 00 00 48 89 ef ba 09 00 00 00 be 01 00 00 00 e8 e1 09 f8 ff 85 c0 0f 85 b2 01 00 00 80 7c 24 0c 03 74 02 <0f> 0b 48 89 ef e8 b8 07 f8 ff f6 05 51 1b c8 ff 02 0f 84 72 ff
---[ end trace 55d811b38fc8e71a ]---

So, to fix this we attempt to grab a runtime PM reference in the ACPI
handler itself asynchronously. If the GPU is already awake (it will have
normal hotplugging at this point) or runtime PM callbacks are currently
disabled on the device, we drop our reference without updating the
autosuspend delay. We only schedule connector reprobes when we
successfully managed to queue up a resume request with our asynchronous
PM ref.

This also has the added benefit of preventing redundant connector
reprobes from ACPI while the GPU is runtime resumed!

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Cc: Karol Herbst <kherbst@redhat.com>
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1477182#c41
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/drm/nouveau: Use pm_runtime_get_noresume() in connector_detect()

commit 6833fb1ec120bf078e1a527c573a09d4de286224 upstream.

It's true we can't resume the device from poll workers in
nouveau_connector_detect(). We can however, prevent the autosuspend
timer from elapsing immediately if it hasn't already without risking any
sort of deadlock with the runtime suspend/resume operations. So do that
instead of entirely avoiding grabbing a power reference.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Cc: stable@vger.kernel.org
Cc: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/drm/nouveau: Fix bogus drm_kms_helper_poll_enable() placement

commit d77ef138ff572409ab93d492e5e6c826ee6fb21d upstream.

Turns out this part is my fault for not noticing when reviewing
9a2eba337cace ("drm/nouveau: Fix drm poll_helper handling"). Currently
we call drm_kms_helper_poll_enable() from nouveau_display_hpd_work().
This makes basically no sense however, because that means we're calling
drm_kms_helper_poll_enable() every time we schedule the hotplug
detection work. This is also against the advice mentioned in
drm_kms_helper_poll_enable()'s documentation:

Note that calls to enable and disable polling must be strictly ordered,
which is automatically the case when they're only call from
suspend/resume callbacks.

Of course, hotplugs can't really be ordered. They could even happen
immediately after we called drm_kms_helper_poll_disable() in
nouveau_display_fini(), which can lead to all sorts of issues.

Additionally; enabling polling /after/ we call
drm_helper_hpd_irq_event() could also mean that we'd miss a hotplug
event anyway, since drm_helper_hpd_irq_event() wouldn't bother trying to
probe connectors so long as polling is disabled.

So; simply move this back into nouveau_display_init() again. The race
condition that both of these patches attempted to work around has
already been fixed properly in

d61a5c106351 ("drm/nouveau: Fix deadlock on runtime suspend")

Fixes: 9a2eba337cace ("drm/nouveau: Fix drm poll_helper handling")
Signed-off-by: Lyude Paul <lyude@redhat.com>
Acked-by: Karol Herbst <kherbst@redhat.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/drm/nouveau: Don't forget to cancel hpd_work on suspend/unload

commit 2f7ca781fd382cf8dde73ed36dfdd93fd05b3332 upstream.

Currently, there's nothing in nouveau that actually cancels this work
struct. So, cancel it on suspend/unload. Otherwise, if we're unlucky
enough hpd_work might try to keep running up until the system is
suspended.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau: Fix deadlocks in nouveau_connector_detect()

commit 3e1a12754d4df5804bfca5dedf09d2ba291bdc2a upstream.

When we disable hotplugging on the GPU, we need to be able to
synchronize with each connector's hotplug interrupt handler before the
interrupt is finally disabled. This can be a problem however, since
nouveau_connector_detect() currently grabs a runtime power reference
when handling connector probing. This will deadlock the runtime suspend
handler like so:

[  861.480896] INFO: task kworker/0:2:61 blocked for more than 120 seconds.
[  861.483290]       Tainted: G           O      4.18.0-rc6Lyude-Test+ #1
[  861.485158] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  861.486332] kworker/0:2     D    0    61      2 0x80000000
[  861.487044] Workqueue: events nouveau_display_hpd_work [nouveau]
[  861.487737] Call Trace:
[  861.488394]  __schedule+0x322/0xaf0
[  861.489070]  schedule+0x33/0x90
[  861.489744]  rpm_resume+0x19c/0x850
[  861.490392]  ? finish_wait+0x90/0x90
[  861.491068]  __pm_runtime_resume+0x4e/0x90
[  861.491753]  nouveau_display_hpd_work+0x22/0x60 [nouveau]
[  861.492416]  process_one_work+0x231/0x620
[  861.493068]  worker_thread+0x44/0x3a0
[  861.493722]  kthread+0x12b/0x150
[  861.494342]  ? wq_pool_ids_show+0x140/0x140
[  861.494991]  ? kthread_create_worker_on_cpu+0x70/0x70
[  861.495648]  ret_from_fork+0x3a/0x50
[  861.496304] INFO: task kworker/6:2:320 blocked for more than 120 seconds.
[  861.496968]       Tainted: G           O      4.18.0-rc6Lyude-Test+ #1
[  861.497654] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  861.498341] kworker/6:2     D    0   320      2 0x80000080
[  861.499045] Workqueue: pm pm_runtime_work
[  861.499739] Call Trace:
[  861.500428]  __schedule+0x322/0xaf0
[  861.501134]  ? wait_for_completion+0x104/0x190
[  861.501851]  schedule+0x33/0x90
[  861.502564]  schedule_timeout+0x3a5/0x590
[  861.503284]  ? mark_held_locks+0x58/0x80
[  861.503988]  ? _raw_spin_unlock_irq+0x2c/0x40
[  861.504710]  ? wait_for_completion+0x104/0x190
[  861.505417]  ? trace_hardirqs_on_caller+0xf4/0x190
[  861.506136]  ? wait_for_completion+0x104/0x190
[  861.506845]  wait_for_completion+0x12c/0x190
[  861.507555]  ? wake_up_q+0x80/0x80
[  861.508268]  flush_work+0x1c9/0x280
[  861.508990]  ? flush_workqueue_prep_pwqs+0x1b0/0x1b0
[  861.509735]  nvif_notify_put+0xb1/0xc0 [nouveau]
[  861.510482]  nouveau_display_fini+0xbd/0x170 [nouveau]
[  861.511241]  nouveau_display_suspend+0x67/0x120 [nouveau]
[  861.511969]  nouveau_do_suspend+0x5e/0x2d0 [nouveau]
[  861.512715]  nouveau_pmops_runtime_suspend+0x47/0xb0 [nouveau]
[  861.513435]  pci_pm_runtime_suspend+0x6b/0x180
[  861.514165]  ? pci_has_legacy_pm_support+0x70/0x70
[  861.514897]  __rpm_callback+0x7a/0x1d0
[  861.515618]  ? pci_has_legacy_pm_support+0x70/0x70
[  861.516313]  rpm_callback+0x24/0x80
[  861.517027]  ? pci_has_legacy_pm_support+0x70/0x70
[  861.517741]  rpm_suspend+0x142/0x6b0
[  861.518449]  pm_runtime_work+0x97/0xc0
[  861.519144]  process_one_work+0x231/0x620
[  861.519831]  worker_thread+0x44/0x3a0
[  861.520522]  kthread+0x12b/0x150
[  861.521220]  ? wq_pool_ids_show+0x140/0x140
[  861.521925]  ? kthread_create_worker_on_cpu+0x70/0x70
[  861.522622]  ret_from_fork+0x3a/0x50
[  861.523299] INFO: task kworker/6:0:1329 blocked for more than 120 seconds.
[  861.523977]       Tainted: G           O      4.18.0-rc6Lyude-Test+ #1
[  861.524644] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  861.525349] kworker/6:0     D    0  1329      2 0x80000000
[  861.526073] Workqueue: events nvif_notify_work [nouveau]
[  861.526751] Call Trace:
[  861.527411]  __schedule+0x322/0xaf0
[  861.528089]  schedule+0x33/0x90
[  861.528758]  rpm_resume+0x19c/0x850
[  861.529399]  ? finish_wait+0x90/0x90
[  861.530073]  __pm_runtime_resume+0x4e/0x90
[  861.530798]  nouveau_connector_detect+0x7e/0x510 [nouveau]
[  861.531459]  ? ww_mutex_lock+0x47/0x80
[  861.532097]  ? ww_mutex_lock+0x47/0x80
[  861.532819]  ? drm_modeset_lock+0x88/0x130 [drm]
[  861.533481]  drm_helper_probe_detect_ctx+0xa0/0x100 [drm_kms_helper]
[  861.534127]  drm_helper_hpd_irq_event+0xa4/0x120 [drm_kms_helper]
[  861.534940]  nouveau_connector_hotplug+0x98/0x120 [nouveau]
[  861.535556]  nvif_notify_work+0x2d/0xb0 [nouveau]
[  861.536221]  process_one_work+0x231/0x620
[  861.536994]  worker_thread+0x44/0x3a0
[  861.537757]  kthread+0x12b/0x150
[  861.538463]  ? wq_pool_ids_show+0x140/0x140
[  861.539102]  ? kthread_create_worker_on_cpu+0x70/0x70
[  861.539815]  ret_from_fork+0x3a/0x50
[  861.540521]
               Showing all locks held in the system:
[  861.541696] 2 locks held by kworker/0:2/61:
[  861.542406]  #0: 000000002dbf8af5 ((wq_completion)"events"){+.+.}, at: process_one_work+0x1b3/0x620
[  861.543071]  #1: 0000000076868126 ((work_completion)(&drm->hpd_work)){+.+.}, at: process_one_work+0x1b3/0x620
[  861.543814] 1 lock held by khungtaskd/64:
[  861.544535]  #0: 0000000059db4b53 (rcu_read_lock){....}, at: debug_show_all_locks+0x23/0x185
[  861.545160] 3 locks held by kworker/6:2/320:
[  861.545896]  #0: 00000000d9e1bc59 ((wq_completion)"pm"){+.+.}, at: process_one_work+0x1b3/0x620
[  861.546702]  #1: 00000000c9f92d84 ((work_completion)(&dev->power.work)){+.+.}, at: process_one_work+0x1b3/0x620
[  861.547443]  #2: 000000004afc5de1 (drm_connector_list_iter){.+.+}, at: nouveau_display_fini+0x96/0x170 [nouveau]
[  861.548146] 1 lock held by dmesg/983:
[  861.548889] 2 locks held by zsh/1250:
[  861.549605]  #0: 00000000348e3cf6 (&tty->ldisc_sem){++++}, at: ldsem_down_read+0x37/0x40
[  861.550393]  #1: 000000007009a7a8 (&ldata->atomic_read_lock){+.+.}, at: n_tty_read+0xc1/0x870
[  861.551122] 6 locks held by kworker/6:0/1329:
[  861.551957]  #0: 000000002dbf8af5 ((wq_completion)"events"){+.+.}, at: process_one_work+0x1b3/0x620
[  861.552765]  #1: 00000000ddb499ad ((work_completion)(&notify->work)#2){+.+.}, at: process_one_work+0x1b3/0x620
[  861.553582]  #2: 000000006e013cbe (&dev->mode_config.mutex){+.+.}, at: drm_helper_hpd_irq_event+0x6c/0x120 [drm_kms_helper]
[  861.554357]  #3: 000000004afc5de1 (drm_connector_list_iter){.+.+}, at: drm_helper_hpd_irq_event+0x78/0x120 [drm_kms_helper]
[  861.555227]  #4: 0000000044f294d9 (crtc_ww_class_acquire){+.+.}, at: drm_helper_probe_detect_ctx+0x3d/0x100 [drm_kms_helper]
[  861.556133]  #5: 00000000db193642 (crtc_ww_class_mutex){+.+.}, at: drm_modeset_lock+0x4b/0x130 [drm]

[  861.557864] =============================================

[  861.559507] NMI backtrace for cpu 2
[  861.560363] CPU: 2 PID: 64 Comm: khungtaskd Tainted: G           O      4.18.0-rc6Lyude-Test+ #1
[  861.561197] Hardware name: LENOVO 20EQS64N0B/20EQS64N0B, BIOS N1EET78W (1.51 ) 05/18/2018
[  861.561948] Call Trace:
[  861.562757]  dump_stack+0x8e/0xd3
[  861.563516]  nmi_cpu_backtrace.cold.3+0x14/0x5a
[  861.564269]  ? lapic_can_unplug_cpu.cold.27+0x42/0x42
[  861.565029]  nmi_trigger_cpumask_backtrace+0xa1/0xae
[  861.565789]  arch_trigger_cpumask_backtrace+0x19/0x20
[  861.566558]  watchdog+0x316/0x580
[  861.567355]  kthread+0x12b/0x150
[  861.568114]  ? reset_hung_task_detector+0x20/0x20
[  861.568863]  ? kthread_create_worker_on_cpu+0x70/0x70
[  861.569598]  ret_from_fork+0x3a/0x50
[  861.570370] Sending NMI from CPU 2 to CPUs 0-1,3-7:
[  861.571426] NMI backtrace for cpu 6 skipped: idling at intel_idle+0x7f/0x120
[  861.571429] NMI backtrace for cpu 7 skipped: idling at intel_idle+0x7f/0x120
[  861.571432] NMI backtrace for cpu 3 skipped: idling at intel_idle+0x7f/0x120
[  861.571464] NMI backtrace for cpu 5 skipped: idling at intel_idle+0x7f/0x120
[  861.571467] NMI backtrace for cpu 0 skipped: idling at intel_idle+0x7f/0x120
[  861.571469] NMI backtrace for cpu 4 skipped: idling at intel_idle+0x7f/0x120
[  861.571472] NMI backtrace for cpu 1 skipped: idling at intel_idle+0x7f/0x120
[  861.572428] Kernel panic - not syncing: hung_task: blocked tasks

So: fix this by making it so that normal hotplug handling /only/ happens
so long as the GPU is currently awake without any pending runtime PM
requests. In the event that a hotplug occurs while the device is
suspending or resuming, we can simply defer our response until the GPU
is fully runtime resumed again.

Changes since v4:
- Use a new trick I came up with using pm_runtime_get() instead of the
  hackish junk we had before

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Cc: stable@vger.kernel.org
Cc: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ocfs2: fix ocfs2 read block panic

commit 234b69e3e089d850a98e7b3145bd00e9b52b1111 upstream.

While reading block, it is possible that io error return due to underlying
storage issue, in this case, BH_NeedsValidate was left in the buffer head.
Then when reading the very block next time, if it was already linked into
journal, that will trigger the following panic.

[203748.702517] kernel BUG at fs/ocfs2/buffer_head_io.c:342!
[203748.702533] invalid opcode: 0000 [#1] SMP
[203748.702561] Modules linked in: ocfs2 ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs sunrpc dm_switch dm_queue_length dm_multipath bonding be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i iw_cxgb4 cxgb4 cxgb3i libcxgbi iw_cxgb3 cxgb3 mdio ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ipmi_devintf iTCO_wdt iTCO_vendor_support dcdbas ipmi_ssif i2c_core ipmi_si ipmi_msghandler acpi_pad pcspkr sb_edac edac_core lpc_ich mfd_core shpchp sg tg3 ptp pps_core ext4 jbd2 mbcache2 sr_mod cdrom sd_mod ahci libahci megaraid_sas wmi dm_mirror dm_region_hash dm_log dm_mod
[203748.703024] CPU: 7 PID: 38369 Comm: touch Not tainted 4.1.12-124.18.6.el6uek.x86_64 #2
[203748.703045] Hardware name: Dell Inc. PowerEdge R620/0PXXHP, BIOS 2.5.2 01/28/2015
[203748.703067] task: ffff880768139c00 ti: ffff88006ff48000 task.ti: ffff88006ff48000
[203748.703088] RIP: 0010:[<ffffffffa05e9f09>]  [<ffffffffa05e9f09>] ocfs2_read_blocks+0x669/0x7f0 [ocfs2]
[203748.703130] RSP: 0018:ffff88006ff4b818  EFLAGS: 00010206
[203748.703389] RAX: 0000000008620029 RBX: ffff88006ff4b910 RCX: 0000000000000000
[203748.703885] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 00000000023079fe
[203748.704382] RBP: ffff88006ff4b8d8 R08: 0000000000000000 R09: ffff8807578c25b0
[203748.704877] R10: 000000000f637376 R11: 000000003030322e R12: 0000000000000000
[203748.705373] R13: ffff88006ff4b910 R14: ffff880732fe38f0 R15: 0000000000000000
[203748.705871] FS:  00007f401992c700(0000) GS:ffff880bfebc0000(0000) knlGS:0000000000000000
[203748.706370] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[203748.706627] CR2: 00007f4019252440 CR3: 00000000a621e000 CR4: 0000000000060670
[203748.707124] Stack:
[203748.707371]  ffff88006ff4b828 ffffffffa0609f52 ffff88006ff4b838 0000000000000001
[203748.707885]  0000000000000000 0000000000000000 ffff880bf67c3800 ffffffffa05eca00
[203748.708399]  00000000023079ff ffffffff81c58b80 0000000000000000 0000000000000000
[203748.708915] Call Trace:
[203748.709175]  [<ffffffffa0609f52>] ? ocfs2_inode_cache_io_unlock+0x12/0x20 [ocfs2]
[203748.709680]  [<ffffffffa05eca00>] ? ocfs2_empty_dir_filldir+0x80/0x80 [ocfs2]
[203748.710185]  [<ffffffffa05ec0cb>] ocfs2_read_dir_block_direct+0x3b/0x200 [ocfs2]
[203748.710691]  [<ffffffffa05f0fbf>] ocfs2_prepare_dx_dir_for_insert.isra.57+0x19f/0xf60 [ocfs2]
[203748.711204]  [<ffffffffa065660f>] ? ocfs2_metadata_cache_io_unlock+0x1f/0x30 [ocfs2]
[203748.711716]  [<ffffffffa05f4f3a>] ocfs2_prepare_dir_for_insert+0x13a/0x890 [ocfs2]
[203748.712227]  [<ffffffffa05f442e>] ? ocfs2_check_dir_for_entry+0x8e/0x140 [ocfs2]
[203748.712737]  [<ffffffffa061b2f2>] ocfs2_mknod+0x4b2/0x1370 [ocfs2]
[203748.713003]  [<ffffffffa061c385>] ocfs2_create+0x65/0x170 [ocfs2]
[203748.713263]  [<ffffffff8121714b>] vfs_create+0xdb/0x150
[203748.713518]  [<ffffffff8121b225>] do_last+0x815/0x1210
[203748.713772]  [<ffffffff812192e9>] ? path_init+0xb9/0x450
[203748.714123]  [<ffffffff8121bca0>] path_openat+0x80/0x600
[203748.714378]  [<ffffffff811bcd45>] ? handle_pte_fault+0xd15/0x1620
[203748.714634]  [<ffffffff8121d7ba>] do_filp_open+0x3a/0xb0
[203748.714888]  [<ffffffff8122a767>] ? __alloc_fd+0xa7/0x130
[203748.715143]  [<ffffffff81209ffc>] do_sys_open+0x12c/0x220
[203748.715403]  [<ffffffff81026ddb>] ? syscall_trace_enter_phase1+0x11b/0x180
[203748.715668]  [<ffffffff816f0c9f>] ? system_call_after_swapgs+0xe9/0x190
[203748.715928]  [<ffffffff8120a10e>] SyS_open+0x1e/0x20
[203748.716184]  [<ffffffff816f0d5e>] system_call_fastpath+0x18/0xd7
[203748.716440] Code: 00 00 48 8b 7b 08 48 83 c3 10 45 89 f8 44 89 e1 44 89 f2 4c 89 ee e8 07 06 11 e1 48 8b 03 48 85 c0 75 df 8b 5d c8 e9 4d fa ff ff <0f> 0b 48 8b 7d a0 e8 dc c6 06 00 48 b8 00 00 00 00 00 00 00 10
[203748.717505] RIP  [<ffffffffa05e9f09>] ocfs2_read_blocks+0x669/0x7f0 [ocfs2]
[203748.717775]  RSP <ffff88006ff4b818>

Joesph ever reported a similar panic.
Link: https://oss.oracle.com/pipermail/ocfs2-devel/2013-May/008931.html
Link: http://lkml.kernel.org/r/20180912063207.29484-1-junxiao.bi@oracle.com
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Changwei Ge <ge.changwei@h3c.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "ubifs: xattr: Don't operate on deleted inodes"

commit f061c1cc404a618858a77aea233fde0aeaad2f2d upstream.

This reverts commit 11a6fc3dc743e22fb50f2196ec55bee5140d3c52.
UBIFS wants to assert that xattr operations are only issued on files
with positive link count. The said patch made this operations return
-ENOENT for unlinked files such that the asserts will no longer trigger.
This was wrong since xattr operations are perfectly fine on unlinked
files.
Instead the assertions need to be fixed/removed.

Cc: <stable@vger.kernel.org>
Fixes: 11a6fc3dc743 ("ubifs: xattr: Don't operate on deleted inodes")
Reported-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Tested-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: target: iscsi: Use bin2hex instead of a re-implementation

commit 8c39e2699f8acb2e29782a834e56306da24937fe upstream.

Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: target: iscsi: Use hex2bin instead of a re-implementation

commit 1816494330a83f2a064499d8ed2797045641f92c upstream.

This change has the following effects, in order of descreasing importance:

1) Prevent a stack buffer overflow

2) Do not append an unnecessary NULL to an anyway binary buffer, which
   is writing one byte past client_digest when caller is:
   chap_string_to_hex(client_digest, chap_r, strlen(chap_r));

The latter was found by KASAN (see below) when input value hes expected size
(32 hex chars), and further analysis revealed a stack buffer overflow can
happen when network-received value is longer, allowing an unauthenticated
remote attacker to smash up to 17 bytes after destination buffer (16 bytes
attacker-controlled and one null).  As switching to hex2bin requires
specifying destination buffer length, and does not internally append any null,
it solves both issues.

This addresses CVE-2018-14633.

Beyond this:

- Validate received value length and check hex2bin accepted the input, to log
  this rejection reason instead of just failing authentication.

- Only log received CHAP_R and CHAP_C values once they passed sanity checks.

==================================================================
BUG: KASAN: stack-out-of-bounds in chap_string_to_hex+0x32/0x60 [iscsi_target_mod]
Write of size 1 at addr ffff8801090ef7c8 by task kworker/0:0/1021

CPU: 0 PID: 1021 Comm: kworker/0:0 Tainted: G           O      4.17.8kasan.sess.connops+ #2
Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 05/19/2014
Workqueue: events iscsi_target_do_login_rx [iscsi_target_mod]
Call Trace:
dump_stack+0x71/0xac
print_address_description+0x65/0x22e
? chap_string_to_hex+0x32/0x60 [iscsi_target_mod]
kasan_report.cold.6+0x241/0x2fd
chap_string_to_hex+0x32/0x60 [iscsi_target_mod]
chap_server_compute_md5.isra.2+0x2cb/0x860 [iscsi_target_mod]
? chap_binaryhex_to_asciihex.constprop.5+0x50/0x50 [iscsi_target_mod]
? ftrace_caller_op_ptr+0xe/0xe
? __orc_find+0x6f/0xc0
? unwind_next_frame+0x231/0x850
? kthread+0x1a0/0x1c0
? ret_from_fork+0x35/0x40
? ret_from_fork+0x35/0x40
? iscsi_target_do_login_rx+0x3bc/0x4c0 [iscsi_target_mod]
? deref_stack_reg+0xd0/0xd0
? iscsi_target_do_login_rx+0x3bc/0x4c0 [iscsi_target_mod]
? is_module_text_address+0xa/0x11
? kernel_text_address+0x4c/0x110
? __save_stack_trace+0x82/0x100
? ret_from_fork+0x35/0x40
? save_stack+0x8c/0xb0
? 0xffffffffc1660000
? iscsi_target_do_login+0x155/0x8d0 [iscsi_target_mod]
? iscsi_target_do_login_rx+0x3bc/0x4c0 [iscsi_target_mod]
? process_one_work+0x35c/0x640
? worker_thread+0x66/0x5d0
? kthread+0x1a0/0x1c0
? ret_from_fork+0x35/0x40
? iscsi_update_param_value+0x80/0x80 [iscsi_target_mod]
? iscsit_release_cmd+0x170/0x170 [iscsi_target_mod]
chap_main_loop+0x172/0x570 [iscsi_target_mod]
? chap_server_compute_md5.isra.2+0x860/0x860 [iscsi_target_mod]
? rx_data+0xd6/0x120 [iscsi_target_mod]
? iscsit_print_session_params+0xd0/0xd0 [iscsi_target_mod]
? cyc2ns_read_begin.part.2+0x90/0x90
? _raw_spin_lock_irqsave+0x25/0x50
? memcmp+0x45/0x70
iscsi_target_do_login+0x875/0x8d0 [iscsi_target_mod]
? iscsi_target_check_first_request.isra.5+0x1a0/0x1a0 [iscsi_target_mod]
? del_timer+0xe0/0xe0
? memset+0x1f/0x40
? flush_sigqueue+0x29/0xd0
iscsi_target_do_login_rx+0x3bc/0x4c0 [iscsi_target_mod]
? iscsi_target_nego_release+0x80/0x80 [iscsi_target_mod]
? iscsi_target_restore_sock_callbacks+0x130/0x130 [iscsi_target_mod]
process_one_work+0x35c/0x640
worker_thread+0x66/0x5d0
? flush_rcu_work+0x40/0x40
kthread+0x1a0/0x1c0
? kthread_bind+0x30/0x30
ret_from_fork+0x35/0x40

The buggy address belongs to the page:
page:ffffea0004243bc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0
flags: 0x17fffc000000000()
raw: 017fffc000000000 0000000000000000 0000000000000000 00000000ffffffff
raw: ffffea0004243c20 ffffea0004243ba0 0000000000000000 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
ffff8801090ef680: f2 f2 f2 f2 f2 f2 f2 01 f2 f2 f2 f2 f2 f2 f2 00
ffff8801090ef700: f2 f2 f2 f2 f2 f2 f2 00 02 f2 f2 f2 f2 f2 f2 00
>ffff8801090ef780: 00 f2 f2 f2 f2 f2 f2 00 00 f2 f2 f2 f2 f2 f2 00
                                              ^
ffff8801090ef800: 00 f2 f2 f2 f2 f2 f2 00 00 00 00 02 f2 f2 f2 f2
ffff8801090ef880: f2 f2 f2 00 00 00 00 00 00 00 00 f2 f2 f2 f2 00
==================================================================

Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "uapi/linux/keyctl.h: don't use C++ reserved keyword as a struct member name"

commit 8c0f9f5b309d627182d5da72a69246f58bde1026 upstream.

This changes UAPI, breaking iwd and libell:

  ell/key.c: In function 'kernel_dh_compute':
  ell/key.c:205:38: error: 'struct keyctl_dh_params' has no member named 'private'; did you mean 'dh_private'?
    struct keyctl_dh_params params = { .private = private,
                                        ^~~~~~~
                                        dh_private

This reverts commit 8a2336e549d385bb0b46880435b411df8d8200e8.

Fixes: 8a2336e549d3 ("uapi/linux/keyctl.h: don't use C++ reserved keyword as a struct member name")
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Randy Dunlap <rdunlap@infradead.org>
cc: Mat Martineau <mathew.j.martineau@linux.intel.com>
cc: Stephan Mueller <smueller@chronox.de>
cc: James Morris <jmorris@namei.org>
cc: "Serge E. Hallyn" <serge@hallyn.com>
cc: Mat Martineau <mathew.j.martineau@linux.intel.com>
cc: Andrew Morton <akpm@linux-foundation.org>
cc: Linus Torvalds <torvalds@linux-foundation.org>
cc: <stable@vger.kernel.org>
Signed-off-by: James Morris <james.morris@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "rpmsg: core: add support to power domains for devices"

This reverts commit 1ed3a93072307265d6385031b72929a904b50f87 which is
commit fe782affd0f440a4e60e2cc81b8f2eccb2923113 upstream

Rafael reports that this patch causes problems:
> -rc2 looks good. There is a problem on dragonboard during boot that was
> introduced in v4.14.71 that I didn't notice last week. We'll bisect it
> and report back later this week. dragonboard on the other branches (4.9,
> 4.18, mainline) looks fine.

As Dan pointed out, during validation, we have bisected this issue on
a dragonboard 410c (can't find root device) to the following commit
for v4.14:

[1ed3a9307230] rpmsg: core: add support to power domains for devices

There is an on-going discussion on "[PATCH] rpmsg: core: add support
to power domains for devices" about this patch having other
dependencies and breaking something else on v4.14 as well.

so drop it.

Reported-by: Rafael Tinoco <rafael.tinoco@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: shmem.c: Correctly annotate new inodes for lockdep

commit b45d71fb89ab8adfe727b9d0ee188ed58582a647 upstream.

Directories and inodes don't necessarily need to be in the same lockdep
class.  For ex, hugetlbfs splits them out too to prevent false positives
in lockdep.  Annotate correctly after new inode creation.  If its a
directory inode, it will be put into a different class.

This should fix a lockdep splat reported by syzbot:

> ======================================================
> WARNING: possible circular locking dependency detected
> 4.18.0-rc8-next-20180810+ #36 Not tainted
> ------------------------------------------------------
> syz-executor900/4483 is trying to acquire lock:
> 00000000d2bfc8fe (&sb->s_type->i_mutex_key#9){++++}, at: inode_lock
> include/linux/fs.h:765 [inline]
> 00000000d2bfc8fe (&sb->s_type->i_mutex_key#9){++++}, at:
> shmem_fallocate+0x18b/0x12e0 mm/shmem.c:2602
>
> but task is already holding lock:
> 0000000025208078 (ashmem_mutex){+.+.}, at: ashmem_shrink_scan+0xb4/0x630
> drivers/staging/android/ashmem.c:448
>
> which lock already depends on the new lock.
>
> -> #2 (ashmem_mutex){+.+.}:
>        __mutex_lock_common kernel/locking/mutex.c:925 [inline]
>        __mutex_lock+0x171/0x1700 kernel/locking/mutex.c:1073
>        mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:1088
>        ashmem_mmap+0x55/0x520 drivers/staging/android/ashmem.c:361
>        call_mmap include/linux/fs.h:1844 [inline]
>        mmap_region+0xf27/0x1c50 mm/mmap.c:1762
>        do_mmap+0xa10/0x1220 mm/mmap.c:1535
>        do_mmap_pgoff include/linux/mm.h:2298 [inline]
>        vm_mmap_pgoff+0x213/0x2c0 mm/util.c:357
>        ksys_mmap_pgoff+0x4da/0x660 mm/mmap.c:1585
>        __do_sys_mmap arch/x86/kernel/sys_x86_64.c:100 [inline]
>        __se_sys_mmap arch/x86/kernel/sys_x86_64.c:91 [inline]
>        __x64_sys_mmap+0xe9/0x1b0 arch/x86/kernel/sys_x86_64.c:91
>        do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
>        entry_SYSCALL_64_after_hwframe+0x49/0xbe
>
> -> #1 (&mm->mmap_sem){++++}:
>        __might_fault+0x155/0x1e0 mm/memory.c:4568
>        _copy_to_user+0x30/0x110 lib/usercopy.c:25
>        copy_to_user include/linux/uaccess.h:155 [inline]
>        filldir+0x1ea/0x3a0 fs/readdir.c:196
>        dir_emit_dot include/linux/fs.h:3464 [inline]
>        dir_emit_dots include/linux/fs.h:3475 [inline]
>        dcache_readdir+0x13a/0x620 fs/libfs.c:193
>        iterate_dir+0x48b/0x5d0 fs/readdir.c:51
>        __do_sys_getdents fs/readdir.c:231 [inline]
>        __se_sys_getdents fs/readdir.c:212 [inline]
>        __x64_sys_getdents+0x29f/0x510 fs/readdir.c:212
>        do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
>        entry_SYSCALL_64_after_hwframe+0x49/0xbe
>
> -> #0 (&sb->s_type->i_mutex_key#9){++++}:
>        lock_acquire+0x1e4/0x540 kernel/locking/lockdep.c:3924
>        down_write+0x8f/0x130 kernel/locking/rwsem.c:70
>        inode_lock include/linux/fs.h:765 [inline]
>        shmem_fallocate+0x18b/0x12e0 mm/shmem.c:2602
>        ashmem_shrink_scan+0x236/0x630 drivers/staging/android/ashmem.c:455
>        ashmem_ioctl+0x3ae/0x13a0 drivers/staging/android/ashmem.c:797
>        vfs_ioctl fs/ioctl.c:46 [inline]
>        file_ioctl fs/ioctl.c:501 [inline]
>        do_vfs_ioctl+0x1de/0x1720 fs/ioctl.c:685
>        ksys_ioctl+0xa9/0xd0 fs/ioctl.c:702
>        __do_sys_ioctl fs/ioctl.c:709 [inline]
>        __se_sys_ioctl fs/ioctl.c:707 [inline]
>        __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:707
>        do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
>        entry_SYSCALL_64_after_hwframe+0x49/0xbe
>
> other info that might help us debug this:
>
> Chain exists of:
>   &sb->s_type->i_mutex_key#9 --> &mm->mmap_sem --> ashmem_mutex
>
>  Possible unsafe locking scenario:
>
>        CPU0                    CPU1
>        ----                    ----
>   lock(ashmem_mutex);
>                                lock(&mm->mmap_sem);
>                                lock(ashmem_mutex);
>   lock(&sb->s_type->i_mutex_key#9);
>
>  *** DEADLOCK ***
>
> 1 lock held by syz-executor900/4483:
>  #0: 0000000025208078 (ashmem_mutex){+.+.}, at:
> ashmem_shrink_scan+0xb4/0x630 drivers/staging/android/ashmem.c:448

Link: http://lkml.kernel.org/r/20180821231835.166639-1-joel@joelfernandes.org
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: NeilBrown <neilb@suse.com>
Suggested-by: NeilBrown <neilb@suse.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ring-buffer: Allow for rescheduling when removing pages

commit 83f365554e47997ec68dc4eca3f5dce525cd15c3 upstream.

When reducing ring buffer size, pages are removed by scheduling a work
item on each CPU for the corresponding CPU ring buffer. After the pages
are removed from ring buffer linked list, the pages are free()d in a
tight loop. The loop does not give up CPU until all pages are removed.
In a worst case behavior, when lot of pages are to be freed, it can
cause system stall.

After the pages are removed from the list, the free() can happen while
the work is rescheduled. Call cond_resched() in the loop to prevent the
system hangup.

Link: http://lkml.kernel.org/r/20180907223129.71994-1-vnagarnaik@google.com
Cc: stable@vger.kernel.org
Fixes: 83f40318dab00 ("ring-buffer: Make removal of ring buffer pages atomic")
Reported-by: Jason Behmer <jbehmer@google.com>
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "PCI: Add ACS quirk for Intel 300 series"

commit 50ca031b51106b1b46162d4e9ecccb7edc95682f upstream.

This reverts f154a718e6cc ("PCI: Add ACS quirk for Intel 300 series").

It turns out that erratum "PCH PCIe* Controller Root Port (ACSCTLR) Appear
As Read Only" has been fixed in 300 series chipsets, even though the
datasheet [1] claims otherwise. To make ACS work properly on 300 series
root ports, revert the faulty commit.

[1] https://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/300-series-c240-series-chipset-pch-spec-update.pdf

Fixes: f154a718e6cc ("PCI: Add ACS quirk for Intel 300 series")
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v4.18+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: fix IDR collision on systems with both fixed and dynamic SPI bus numbers

commit 1a4327fbf4554d5b78d75b19a13d40d6de220159 upstream.

On systems where some controllers get a dynamic ID assigned and some have
a fixed number (e.g. from ACPI tables), the current implementation might
run into an IDR collision: in case of a fixed bus number is gotten by a
driver (but not marked busy in IDR tree) and a driver with dynamic bus
number gets the same ID and predictably fails.

Fix this by means of checking-in fixed IDsin IDR as far as dynamic ones
at the moment of the controller registration.

Fixes: 9b61e302210e (spi: Pick spi bus number from Linux idr or spi alias)
Signed-off-by: Kirill Kapranov <kirill.kapranov@compulab.co.il>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/x86/vpmu: Zero struct pt_regs before calling into sample handling code

commit 70513d58751d7c6c1a0133557b13089b9f2e3e66 upstream.

Otherwise we may leak kernel stack for events that sample user
registers.

Reported-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/netfront: don't bug in case of too many frags

commit ad4f15dc2c70b1de5e0a64d27335962fbc9cf71c upstream.

Commit 57f230ab04d291 ("xen/netfront: raise max number of slots in
xennet_get_responses()") raised the max number of allowed slots by one.
This seems to be problematic in some configurations with netback using
a larger MAX_SKB_FRAGS value (e.g. old Linux kernel with MAX_SKB_FRAGS
defined as 18 instead of nowadays 17).

Instead of BUG_ON() in this case just fall back to retransmission.

Fixes: 57f230ab04d291 ("xen/netfront: raise max number of slots in xennet_get_responses()")
Cc: stable@vger.kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/x86: alienware-wmi: Correct a memory leak

commit ff0e9f26288d2daee4950f42b37a3d3d30d36ec1 upstream.

An ACPI buffer that was allocated was not being freed after use.

Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Cc: stable@vger.kernel.org
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: oxfw: fix memory leak of private data

commit 498fe23aad8e3b5a9554f55719c537603b4476ea upstream.

Although private data of sound card instance is usually allocated in the
tail of the instance, drivers in ALSA firewire stack allocate the private
data before allocating the instance. In this case, the private data
should be released explicitly at .private_free callback of the instance.

This commit fixes memory leak following to the above design.

Fixes: 6c29230e2a5f ('ALSA: oxfw: delayed registration of sound card')
Cc: <stable@vger.kernel.org> # v4.7+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: oxfw: fix memory leak of discovered stream formats at error path

commit 1064bc685d359f549f91c2d5f111965a9284f328 upstream.

After finishing discover of stream formats, ALSA OXFW driver has memory
leak of allocated memory object at error path.

This commit releases the memory object at the error path.

Fixes: 6c29230e2a5f ('ALSA: oxfw: delayed registration of sound card')
Cc: <stable@vger.kernel.org> # v4.7+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: oxfw: fix memory leak for model-dependent data at error path

commit ce925f088b979537f22f9e05eb923ef9822ca139 upstream.

After allocating model-dependent data, ALSA OXFW driver has memory leak
of the data at error path.

This commit releases the data at the error path.

Fixes: 6c29230e2a5f ('ALSA: oxfw: delayed registration of sound card')
Cc: <stable@vger.kernel.org> # v4.7+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: fireworks: fix memory leak of response buffer at error path

commit c3b55e2ec9c76e7a0de2a0b1dc851fdc9440385b upstream.

After allocating memory object for response buffer, ALSA fireworks
driver has leak of the memory object at error path.

This commit releases the object at the error path.

Fixes: 7d3c1d5901aa('ALSA: fireworks: delayed registration of sound card')
Cc: <stable@vger.kernel.org> # v4.7+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: firewire-tascam: fix memory leak of private data

commit 8d28277c065a974873c6781d44b7bcdcd8fb4e8a upstream.

Although private data of sound card instance is usually allocated in the
tail of the instance, drivers in ALSA firewire stack allocate the private
data before allocating the instance. In this case, the private data
should be released explicitly at .private_free callback of the instance.

This commit fixes memory leak following to the above design.

Fixes: b610386c8afb ('ALSA: firewire-tascam: deleyed registration of sound card')
Cc: <stable@vger.kernel.org> # v4.7+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: firewire-digi00x: fix memory leak of private data

commit a49a83ab05e34edd6c71a4fbd062c9a7ba6d18aa upstream.

Although private data of sound card instance is usually allocated in the
tail of the instance, drivers in ALSA firewire stack allocate the private
data before allocating the instance. In this case, the private data
should be released explicitly at .private_free callback of the instance.

This commit fixes memory leak following to the above design.

Fixes: 86c8dd7f4da3 ('ALSA: firewire-digi00x: delayed registration of sound card')
Cc: <stable@vger.kernel.org> # v4.7+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: fireface: fix memory leak in ff400_switch_fetching_mode()

commit 36f3a6e02c143a7e9e4e143e416371f67bc1fae6 upstream.

An allocated memory forgets to be released.

Fixes: 76fdb3a9e13 ('ALSA: fireface: add support for Fireface 400')
Cc: <stable@vger.kernel.org> # 4.12+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: emu10k1: fix possible info leak to userspace on SNDRV_EMU10K1_IOCTL_INFO

commit 49434c6c575d2008c0abbc93e615019f39e01252 upstream.

snd_emu10k1_fx8010_ioctl(SNDRV_EMU10K1_IOCTL_INFO) allocates
memory using kmalloc() and partially fills it by calling
snd_emu10k1_fx8010_info() before returning the resulting
structure to userspace, leaving uninitialized holes. Let's
just use kzalloc() here.

BugLink: http://blog.infosectcbr.com.au/2018/09/linux-kernel-infoleaks.html
Signed-off-by: Willy Tarreau <w@1wt.eu>
Cc: Jann Horn <jannh@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: bebob: use address returned by kmalloc() instead of kernel stack for streaming DMA mapping

commit 493626f2d87a74e6dbea1686499ed6e7e600484e upstream.

When executing 'fw_run_transaction()' with 'TCODE_WRITE_BLOCK_REQUEST',
an address of 'payload' argument is used for streaming DMA mapping by
'firewire_ohci' module if 'size' argument is larger than 8 byte.
Although in this case the address should not be on kernel stack, current
implementation of ALSA bebob driver uses data in kernel stack for a cue
to boot M-Audio devices. This often brings unexpected result, especially
for a case of CONFIG_VMAP_STACK=y.

This commit fixes the bug.

Reference: https://bugzilla.kernel.org/show_bug.cgi?id=201021
Reference: https://forum.manjaro.org/t/firewire-m-audio-410-driver-wont-load-firmware/51165
Fixes: a2b2a7798fb6('ALSA: bebob: Send a cue to load firmware for M-Audio Firewire series')
Cc: <stable@vger.kernel.org> # v3.16+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: bebob: fix memory leak for M-Audio FW1814 and ProjectMix I/O at error path

commit b1fbebd4164b3d170ad916dcd692cf843c9c065d upstream.

After allocating model-dependent data for M-Audio FW1814 and ProjectMix
I/O, ALSA bebob driver has memory leak at error path.

This commit releases the allocated data at the error path.

Fixes: 04a2c73c97eb('ALSA: bebob: delayed registration of sound card')
Cc: <stable@vger.kernel.org> # v4.7+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: rsnd: fixup not to call clk_get/set under non-atomic

commit 4d230d12710646788af581ba0155d83ab48b955c upstream.

Clocking operations clk_get/set_rate, are non-atomic,
they shouldn't be called in soc_pcm_trigger() which is atomic.

Following issue was found due to execution of clk_get_rate() causes
sleep in soc_pcm_trigger(), which shouldn't be blocked.

We can reproduce this issue by following
> enable CONFIG_DEBUG_ATOMIC_SLEEP=y
> compile, and boot
> mount -t debugfs none /sys/kernel/debug
> while true; do cat /sys/kernel/debug/clk/clk_summary > /dev/null; done &
> while true; do aplay xxx; done

This patch adds support to .prepare callback, and moves non-atomic
clocking operations to it. As .prepare is non-atomic, it is always
called before trigger_start/trigger_stop.

BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620
in_atomic(): 1, irqs_disabled(): 128, pid: 2242, name: aplay
INFO: lockdep is turned off.
irq event stamp: 5964
hardirqs last enabled at (5963): [<ffff200008e59e40>] mutex_lock_nested+0x6e8/0x6f0
hardirqs last disabled at (5964): [<ffff200008e623f0>] _raw_spin_lock_irqsave+0x24/0x68
softirqs last enabled at (5502): [<ffff200008081838>] __do_softirq+0x560/0x10c0
softirqs last disabled at (5495): [<ffff2000080c2e78>] irq_exit+0x160/0x25c
Preemption disabled at:[ 62.904063] [<ffff200008be4d48>] snd_pcm_stream_lock+0xb4/0xc0
CPU: 2 PID: 2242 Comm: aplay Tainted: G B C 4.9.54+ #186
Hardware name: Renesas Salvator-X board based on r8a7795 (DT)
Call trace:
[<ffff20000808fe48>] dump_backtrace+0x0/0x37c
[<ffff2000080901d8>] show_stack+0x14/0x1c
[<ffff2000086f4458>] dump_stack+0xfc/0x154
[<ffff2000081134a0>] ___might_sleep+0x57c/0x58c
[<ffff2000081136b8>] __might_sleep+0x208/0x21c
[<ffff200008e5980c>] mutex_lock_nested+0xb4/0x6f0
[<ffff2000087cac74>] clk_prepare_lock+0xb0/0x184
[<ffff2000087cb094>] clk_core_get_rate+0x14/0x54
[<ffff2000087cb0f4>] clk_get_rate+0x20/0x34
[<ffff20000113aa00>] rsnd_adg_ssi_clk_try_start+0x158/0x4f8 [snd_soc_rcar]
[<ffff20000113da00>] rsnd_ssi_init+0x668/0x7a0 [snd_soc_rcar]
[<ffff200001133ff4>] rsnd_soc_dai_trigger+0x4bc/0xcf8 [snd_soc_rcar]
[<ffff200008c1af24>] soc_pcm_trigger+0x2a4/0x2d4

Fixes: e7d850dd10f4 ("ASoC: rsnd: use mod base common method on SSI-parent")
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Signed-off-by: Timo Wischer <twischer@de.adit-jv.com>
[Kuninori: tidyup for upstream]
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: cs4265: fix MMTLR Data switch control

commit 90a3b7f8aba3011badacd6d8121e03aa24ac79d1 upstream.

The MMTLR bit is in the CS4265_SPDIF_CTL2 register at address 0x12 bit 0
and not at address 0x0 bit 1. Fix this.

Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFC: Fix the number of pipes

commit e285d5bfb7e9785d289663baef252dd315e171f8 upstream.

According to ETSI TS 102 622 specification chapter 4.4 pipe identifier
is 7 bits long which allows for 128 unique pipe IDs. Because
NFC_HCI_MAX_PIPES is used as the number of pipes supported and not
as the max pipe ID, its value should be 128 instead of 127.

nfc_hci_recv_from_llc extracts pipe ID from packet header using
NFC_HCI_FRAGMENT(0x7F) mask which allows for pipe ID value of 127.
Same happens when NCI_HCP_MSG_GET_PIPE() is being used. With
pipes array having only 127 elements and pipe ID of 127 the OOB memory
access will result.

Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Allen Pais <allen.pais@oracle.com>
Cc: "David S. Miller" <davem@davemloft.net>
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFC: Fix possible memory corruption when handling SHDLC I-Frame commands

commit 674d9de02aa7d521ebdf66c3958758bdd9c64e11 upstream.

When handling SHDLC I-Frame commands "pipe" field used for indexing
into an array should be checked before usage. If left unchecked it
might access memory outside of the array of size NFC_HCI_MAX_PIPES(127).

Malformed NFC HCI frames could be injected by a malicious NFC device
communicating with the device being attacked (remote attack vector),
or even by an attacker with physical access to the I2C bus such that
they could influence the data transfers on that bus (local attack vector).
skb->data is controlled by the attacker and has only been sanitized in
the most trivial ways (CRC check), therefore we can consider the
create_info struct and all of its members to tainted. 'create_info->pipe'
with max value of 255 (uint8) is used to take an offset of the
hdev->pipes array of 127 elements which can lead to OOB write.

Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Allen Pais <allen.pais@oracle.com>
Cc: "David S. Miller" <davem@davemloft.net>
Suggested-by: Kevin Deus <kdeus@google.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tls: clear key material from kernel memory when do_tls_setsockopt_conf fails

[ Upstream commit c844eb46b7d43c2cf760169df5ae1d5b033af338 ]

Fixes: 3c4d7559159b ("tls: kernel TLS support")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tls: zero the crypto information from tls_context before freeing

[ Upstream commit 86029d10af18381814881d6cce2dd6872163b59f ]

This contains key material in crypto_send_aes_gcm_128 and
crypto_recv_aes_gcm_128.

Introduce union tls_crypto_context, and replace the two identical
unions directly embedded in struct tls_context with it. We can then
use this union to clean up the memory in the new tls_ctx_free()
function.

Fixes: 3c4d7559159b ("tls: kernel TLS support")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tls: don't copy the key out of tls12_crypto_info_aes_gcm_128

[ Upstream commit 7cba09c6d5bc73ebbd25a353742d9ddb7a713b95 ]

There's no need to copy the key to an on-stack buffer before calling
crypto_aead_setkey().

Fixes: 3c4d7559159b ("tls: kernel TLS support")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/sched: act_sample: fix NULL dereference in the data path

[ Upstream commit 34043d250f51368f214aed7f54c2dc29c819a8c7 ]

Matteo reported the following splat, testing the datapath of TC 'sample':

BUG: KASAN: null-ptr-deref in tcf_sample_act+0xc4/0x310
Read of size 8 at addr 0000000000000000 by task nc/433

CPU: 0 PID: 433 Comm: nc Not tainted 4.19.0-rc3-kvm #17
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS ?-20180531_142017-buildhw-08.phx2.fedoraproject.org-1.fc28 04/01/2014
Call Trace:
  kasan_report.cold.6+0x6c/0x2fa
  tcf_sample_act+0xc4/0x310
  ? dev_hard_start_xmit+0x117/0x180
  tcf_action_exec+0xa3/0x160
  tcf_classify+0xdd/0x1d0
  htb_enqueue+0x18e/0x6b0
  ? deref_stack_reg+0x7a/0xb0
  ? htb_delete+0x4b0/0x4b0
  ? unwind_next_frame+0x819/0x8f0
  ? entry_SYSCALL_64_after_hwframe+0x44/0xa9
  __dev_queue_xmit+0x722/0xca0
  ? unwind_get_return_address_ptr+0x50/0x50
  ? netdev_pick_tx+0xe0/0xe0
  ? save_stack+0x8c/0xb0
  ? kasan_kmalloc+0xbe/0xd0
  ? __kmalloc_track_caller+0xe4/0x1c0
  ? __kmalloc_reserve.isra.45+0x24/0x70
  ? __alloc_skb+0xdd/0x2e0
  ? sk_stream_alloc_skb+0x91/0x3b0
  ? tcp_sendmsg_locked+0x71b/0x15a0
  ? tcp_sendmsg+0x22/0x40
  ? __sys_sendto+0x1b0/0x250
  ? __x64_sys_sendto+0x6f/0x80
  ? do_syscall_64+0x5d/0x150
  ? entry_SYSCALL_64_after_hwframe+0x44/0xa9
  ? __sys_sendto+0x1b0/0x250
  ? __x64_sys_sendto+0x6f/0x80
  ? do_syscall_64+0x5d/0x150
  ? entry_SYSCALL_64_after_hwframe+0x44/0xa9
  ip_finish_output2+0x495/0x590
  ? ip_copy_metadata+0x2e0/0x2e0
  ? skb_gso_validate_network_len+0x6f/0x110
  ? ip_finish_output+0x174/0x280
  __tcp_transmit_skb+0xb17/0x12b0
  ? __tcp_select_window+0x380/0x380
  tcp_write_xmit+0x913/0x1de0
  ? __sk_mem_schedule+0x50/0x80
  tcp_sendmsg_locked+0x49d/0x15a0
  ? tcp_rcv_established+0x8da/0xa30
  ? tcp_set_state+0x220/0x220
  ? clear_user+0x1f/0x50
  ? iov_iter_zero+0x1ae/0x590
  ? __fget_light+0xa0/0xe0
  tcp_sendmsg+0x22/0x40
  __sys_sendto+0x1b0/0x250
  ? __ia32_sys_getpeername+0x40/0x40
  ? _copy_to_user+0x58/0x70
  ? poll_select_copy_remaining+0x176/0x200
  ? __pollwait+0x1c0/0x1c0
  ? ktime_get_ts64+0x11f/0x140
  ? kern_select+0x108/0x150
  ? core_sys_select+0x360/0x360
  ? vfs_read+0x127/0x150
  ? kernel_write+0x90/0x90
  __x64_sys_sendto+0x6f/0x80
  do_syscall_64+0x5d/0x150
  entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7fefef2b129d
Code: ff ff ff ff eb b6 0f 1f 80 00 00 00 00 48 8d 05 51 37 0c 00 41 89 ca 8b 00 85 c0 75 20 45 31 c9 45 31 c0 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 6b f3 c3 66 0f 1f 84 00 00 00 00 00 41 56 41
RSP: 002b:00007fff2f5350c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 000056118d60c120 RCX: 00007fefef2b129d
RDX: 0000000000002000 RSI: 000056118d629320 RDI: 0000000000000003
RBP: 000056118d530370 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000002000
R13: 000056118d5c2a10 R14: 000056118d5c2a10 R15: 000056118d5303b8

tcf_sample_act() tried to update its per-cpu stats, but tcf_sample_init()
forgot to allocate them, because tcf_idr_create() was called with a wrong
value of 'cpustats'. Setting it to true proved to fix the reported crash.

Reported-by: Matteo Croce <mcroce@redhat.com>
Fixes: 65a206c01e8e ("net/sched: Change act_api and act_xxx modules to use IDR")
Fixes: 5c5670fae430 ("net/sched: Introduce sample tc action")
Tested-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

udp6: add missing checks on edumux packet processing

[ Upstream commit eb63f2964dbe36f26deac77d3016791675821ded ]

Currently the UDPv6 early demux rx code path lacks some mandatory
checks, already implemented into the normal RX code path - namely
the checksum conversion and no_check6_rx check.

Similar to the previous commit, we move the common processing to
an UDPv6 specific helper and call it from both edemux code path
and normal code path. In respect to the UDPv4, we need to add an
explicit check for non zero csum according to no_check6_rx value.

Reported-by: Jianlin Shi <jishi@redhat.com>
Suggested-by: Xin Long <lucien.xin@gmail.com>
Fixes: c9f2c1ae123a ("udp6: fix socket leak on early demux")
Fixes: 2abb7cdc0dc8 ("udp: Add support for doing checksum unnecessary conversion")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

neighbour: confirm neigh entries when ARP packet is received

[ Upstream commit f0e0d04413fcce9bc76388839099aee93cd0d33b ]

Update 'confirmed' timestamp when ARP packet is received. It shouldn't
affect locktime logic and anyway entry can be confirmed by any higher-layer
protocol. Thus it makes sense to confirm it when ARP packet is received.

Fixes: 77d7123342dc ("neighbour: update neigh timestamps iff update is effective")
Signed-off-by: Vasily Khoruzhick <vasilykh@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

udp4: fix IP_CMSG_CHECKSUM for connected sockets

[ Upstream commit 2b5a921740a55c00223a797d075b9c77c42cb171 ]

commit 2abb7cdc0dc8 ("udp: Add support for doing checksum
unnecessary conversion") left out the early demux path for
connected sockets. As a result IP_CMSG_CHECKSUM gives wrong
values for such socket when GRO is not enabled/available.

This change addresses the issue by moving the csum conversion to a
common helper and using such helper in both the default and the
early demux rx path.

Fixes: 2abb7cdc0dc8 ("udp: Add support for doing checksum unnecessary conversion")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

qmi_wwan: set DTR for modems in forced USB2 mode

[ Upstream commit 922005c7f50e7f4b2a6dbc182e9c575b4f92396b ]

Recent firmware revisions have added the ability to force
these modems to USB2 mode, hiding their SuperSpeed
capabilities from the host. The driver has been using the
SuperSpeed capability, as shown by the bcdUSB field of the
device descriptor, to detect the need to enable the DTR
quirk. This method fails when the modems are forced to
USB2 mode by the modem firmware.

Fix by unconditionally enabling the DTR quirk for the
affected device IDs.

Reported-by: Fred Veldini <fred.veldini@gmail.com>
Reported-by: Deshu Wen <dwen@sierrawireless.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Reported-by: Fred Veldini <fred.veldini@gmail.com>
Reported-by: Deshu Wen <dwen@sierrawireless.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pppoe: fix reception of frames with no mac header

[ Upstream commit 8540827ebac6b654ab2f69c8fbce9e4fbd6304a0 ]

pppoe_rcv() needs to look back at the Ethernet header in order to
lookup the PPPoE session. Therefore we need to ensure that the mac
header is big enough to contain an Ethernet header. Otherwise
eth_hdr(skb)->h_source might access invalid data.

==================================================================
BUG: KMSAN: uninit-value in __get_item drivers/net/ppp/pppoe.c:172 [inline]
BUG: KMSAN: uninit-value in get_item drivers/net/ppp/pppoe.c:236 [inline]
BUG: KMSAN: uninit-value in pppoe_rcv+0xcef/0x10e0 drivers/net/ppp/pppoe.c:450
CPU: 0 PID: 4543 Comm: syz-executor355 Not tainted 4.16.0+ #87
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google
01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x185/0x1d0 lib/dump_stack.c:53
kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
__msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:683
__get_item drivers/net/ppp/pppoe.c:172 [inline]
get_item drivers/net/ppp/pppoe.c:236 [inline]
pppoe_rcv+0xcef/0x10e0 drivers/net/ppp/pppoe.c:450
__netif_receive_skb_core+0x47df/0x4a90 net/core/dev.c:4562
__netif_receive_skb net/core/dev.c:4627 [inline]
netif_receive_skb_internal+0x49d/0x630 net/core/dev.c:4701
netif_receive_skb+0x230/0x240 net/core/dev.c:4725
tun_rx_batched drivers/net/tun.c:1555 [inline]
tun_get_user+0x740f/0x7c60 drivers/net/tun.c:1962
tun_chr_write_iter+0x1d4/0x330 drivers/net/tun.c:1990
call_write_iter include/linux/fs.h:1782 [inline]
new_sync_write fs/read_write.c:469 [inline]
__vfs_write+0x7fb/0x9f0 fs/read_write.c:482
vfs_write+0x463/0x8d0 fs/read_write.c:544
SYSC_write+0x172/0x360 fs/read_write.c:589
SyS_write+0x55/0x80 fs/read_write.c:581
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x4447c9
RSP: 002b:00007fff64c8fc28 EFLAGS: 00000297 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00000000004447c9
RDX: 000000000000fd87 RSI: 0000000020000600 RDI: 0000000000000004
RBP: 00000000006cf018 R08: 00007fff64c8fda8 R09: 00007fff00006bda
R10: 0000000000005fe7 R11: 0000000000000297 R12: 00000000004020d0
R13: 0000000000402160 R14: 0000000000000000 R15: 0000000000000000

Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline]
kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188
kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314
kmsan_slab_alloc+0x11/0x20 mm/kmsan/kmsan.c:321
slab_post_alloc_hook mm/slab.h:445 [inline]
slab_alloc_node mm/slub.c:2737 [inline]
__kmalloc_node_track_caller+0xaed/0x11c0 mm/slub.c:4369
__kmalloc_reserve net/core/skbuff.c:138 [inline]
__alloc_skb+0x2cf/0x9f0 net/core/skbuff.c:206
alloc_skb include/linux/skbuff.h:984 [inline]
alloc_skb_with_frags+0x1d4/0xb20 net/core/skbuff.c:5234
sock_alloc_send_pskb+0xb56/0x1190 net/core/sock.c:2085
tun_alloc_skb drivers/net/tun.c:1532 [inline]
tun_get_user+0x2242/0x7c60 drivers/net/tun.c:1829
tun_chr_write_iter+0x1d4/0x330 drivers/net/tun.c:1990
call_write_iter include/linux/fs.h:1782 [inline]
new_sync_write fs/read_write.c:469 [inline]
__vfs_write+0x7fb/0x9f0 fs/read_write.c:482
vfs_write+0x463/0x8d0 fs/read_write.c:544
SYSC_write+0x172/0x360 fs/read_write.c:589
SyS_write+0x55/0x80 fs/read_write.c:581
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
==================================================================

Fixes: 224cf5ad14c0 ("ppp: Move the PPP drivers")
Reported-by: syzbot+f5f6080811c849739212@syzkaller.appspotmail.com
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: hp100: fix always-true check for link up state

[ Upstream commit a7f38002fb69b44f8fc622ecb838665d0b8666af ]

The operation ~(p100_inb(VG_LAN_CFG_1) & HP100_LINK_UP) returns a value
that is always non-zero and hence the wait for the link to drop always
terminates prematurely. Fix this by using a logical not operator instead
of a bitwise complement. This issue has been in the driver since
pre-2.6.12-rc2.

Detected by CoverityScan, CID#114157 ("Logical vs. bitwise operator")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/appletalk: fix minor pointer leak to userspace in SIOCFINDIPDDPRT

[ Upstream commit 9824dfae5741275473a23a7ed5756c7b6efacc9d ]

Fields ->dev and ->next of struct ipddp_route may be copied to
userspace on the SIOCFINDIPDDPRT ioctl. This is only accessible
to CAP_NET_ADMIN though. Let's manually copy the relevant fields
instead of using memcpy().

BugLink: http://blog.infosectcbr.com.au/2018/09/linux-kernel-infoleaks.html
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: fix possible use-after-free in ip6_xmit()

[ Upstream commit bbd6528d28c1b8e80832b3b018ec402b6f5c3215 ]

In the unlikely case ip6_xmit() has to call skb_realloc_headroom(),
we need to call skb_set_owner_w() before consuming original skb,
otherwise we risk a use-after-free.

Bring IPv6 in line with what we do in IPv4 to fix this.

Fixes: 1da177e4c3f41 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gso_segment: Reset skb->mac_len after modifying network header

[ Upstream commit c56cae23c6b167acc68043c683c4573b80cbcc2c ]

When splitting a GSO segment that consists of encapsulated packets, the
skb->mac_len of the segments can end up being set wrong, causing packet
drops in particular when using act_mirred and ifb interfaces in
combination with a qdisc that splits GSO packets.

This happens because at the time skb_segment() is called, network_header
will point to the inner header, throwing off the calculation in
skb_reset_mac_len(). The network_header is subsequently adjust by the
outer IP gso_segment handlers, but they don't set the mac_len.

Fix this by adding skb_reset_mac_len() calls to both the IPv4 and IPv6
gso_segment handlers, after they modify the network_header.

Many thanks to Eric Dumazet for his help in identifying the cause of
the bug.

Acked-by: Dave Taht <dave.taht@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.14.72

e1000e: Fix check_for_link return value with autoneg off

commit 4e7dc08e57c95673d2edaba8983c3de4dd1f65f5 upstream.

When autoneg is off, the .check_for_link callback functions clear the
get_link_status flag and systematically return a "pseudo-error". This means
that the link is not detected as up until the next execution of the
e1000_watchdog_task() 2 seconds later.

Fixes: 19110cfbb34d ("e1000e: Separate signaling for link check/link up")
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

e1000e: Fix link check race condition

commit e2710dbf0dc1e37d85368e2404049dadda848d5a upstream.

Alex reported the following race condition:

/* link goes up... interrupt... schedule watchdog */
\ e1000_watchdog_task
\ e1000e_has_link
\ hw->mac.ops.check_for_link() === e1000e_check_for_copper_link
\ e1000e_phy_has_link_generic(..., &link)
link = true

/* link goes down... interrupt */
\ e1000_msix_other
hw->mac.get_link_status = true

/* link is up */
mac->get_link_status = false

link_active = true
/* link_active is true, wrongly, and stays so because
* get_link_status is false */

Avoid this problem by making sure that we don't set get_link_status = false
after having checked the link.

It seems this problem has been present since the introduction of e1000e.

Link: https://lkml.org/lkml/2018/1/29/338
Reported-by: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "e1000e: Separate signaling for link check/link up"

commit 3016e0a0c91246e55418825ba9aae271be267522 upstream.

This reverts commit 19110cfbb34d4af0cdfe14cd243f3b09dc95b013.
This reverts commit 4110e02eb45ea447ec6f5459c9934de0a273fb91.
This reverts commit d3604515c9eda464a92e8e67aae82dfe07fe3c98.

Commit 19110cfbb34d ("e1000e: Separate signaling for link check/link up")
changed what happens to the link status when there is an error which
happens after "get_link_status = false" in the copper check_for_link
callbacks. Previously, such an error would be ignored and the link
considered up. After that commit, any error implies that the link is down.

Revert commit 19110cfbb34d ("e1000e: Separate signaling for link check/link
up") and its followups. After reverting, the race condition described in
the log of commit 19110cfbb34d is reintroduced. It may still be triggered
by LSC events but this should keep the link down in case the link is
electrically unstable, as discussed. The race may no longer be
triggered by RXO events because commit 4aea7a5c5e94 ("e1000e: Avoid
receiver overrun interrupt bursts") restored reading icr in the Other
handler.

Link: https://lkml.org/lkml/2018/3/1/789
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

e1000e: Avoid missed interrupts following ICR read

commit 116f4a640b3197401bc93b8adc6c35040308ceff upstream.

The 82574 specification update errata 12 states that interrupts may be
missed if ICR is read while INT_ASSERTED is not set. Avoid that problem by
setting all bits related to events that can trigger the Other interrupt in
IMS.

The Other interrupt is raised for such events regardless of whether or not
they are set in IMS. However, only when they are set is the INT_ASSERTED
bit also set in ICR.

By doing this, we ensure that INT_ASSERTED is always set when we read ICR
in e1000_msix_other() and steer clear of the errata. This also ensures that
ICR will automatically be cleared on read, therefore we no longer need to
clear bits explicitly.

Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

e1000e: Fix queue interrupt re-raising in Other interrupt

commit 361a954e6a7215de11a6179ad9bdc07d7e394b04 upstream.

Restores the ICS write for Rx/Tx queue interrupts which was present before
commit 16ecba59bc33 ("e1000e: Do not read ICR in Other interrupt", v4.5-rc1)
but was not restored in commit 4aea7a5c5e94
("e1000e: Avoid receiver overrun interrupt bursts", v4.15-rc1).

This re-raises the queue interrupts in case the txq or rxq bits were set in
ICR and the Other interrupt handler read and cleared ICR before the queue
interrupt was raised.

Fixes: 4aea7a5c5e94 ("e1000e: Avoid receiver overrun interrupt bursts")
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Partial revert "e1000e: Avoid receiver overrun interrupt bursts"

commit 1f0ea19722ef9dfa229a9540f70b8d1c34a98a6a upstream.

This partially reverts commit 4aea7a5c5e940c1723add439f4088844cd26196d.

We keep the fix for the first part of the problem (1) described in the log
of that commit, that is to read ICR in the other interrupt handler. We
remove the fix for the second part of the problem (2), Other interrupt
throttling.

Bursts of "Other" interrupts may once again occur during rxo (receive
overflow) traffic conditions. This is deemed acceptable in the interest of
avoiding unforeseen fallout from changes that are not strictly necessary.
As discussed, the e1000e driver should be in "maintenance mode".

Link: https://www.spinics.net/lists/netdev/msg480675.html
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

e1000e: Remove Other from EIAC

commit 745d0bd3af99ccc8c5f5822f808cd133eadad6ac upstream.

It was reported that emulated e1000e devices in vmware esxi 6.5 Build
7526125 do not link up after commit 4aea7a5c5e94 ("e1000e: Avoid receiver
overrun interrupt bursts", v4.15-rc1). Some tracing shows that after
e1000e_trigger_lsc() is called, ICR reads out as 0x0 in e1000_msix_other()
on emulated e1000e devices. In comparison, on real e1000e 82574 hardware,
icr=0x80000004 (_INT_ASSERTED | _LSC) in the same situation.

Some experimentation showed that this flaw in vmware e1000e emulation can
be worked around by not setting Other in EIAC. This is how it was before
16ecba59bc33 ("e1000e: Do not read ICR in Other interrupt", v4.5-rc1).

Fixes: 4aea7a5c5e94 ("e1000e: Avoid receiver overrun interrupt bursts")
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/ipv6: prevent use after free in ip6_route_mpath_notify

commit f7225172f25aaf0dfd9ad65f05be8da5d6108b12 upstream.

syzbot reported a use-after-free:

BUG: KASAN: use-after-free in ip6_route_mpath_notify+0xe9/0x100 net/ipv6/route.c:4180
Read of size 4 at addr ffff8801bf789cf0 by task syz-executor756/4555

CPU: 1 PID: 4555 Comm: syz-executor756 Not tainted 4.17.0-rc7+ #78
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1b9/0x294 lib/dump_stack.c:113
print_address_description+0x6c/0x20b mm/kasan/report.c:256
kasan_report_error mm/kasan/report.c:354 [inline]
kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412
__asan_report_load4_noabort+0x14/0x20 mm/kasan/report.c:432
ip6_route_mpath_notify+0xe9/0x100 net/ipv6/route.c:4180
ip6_route_multipath_add+0x615/0x1910 net/ipv6/route.c:4303
inet6_rtm_newroute+0xe3/0x160 net/ipv6/route.c:4391
...

Allocated by task 4555:
save_stack+0x43/0xd0 mm/kasan/kasan.c:448
set_track mm/kasan/kasan.c:460 [inline]
kasan_kmalloc+0xc4/0xe0 mm/kasan/kasan.c:553
kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:490
kmem_cache_alloc+0x12e/0x760 mm/slab.c:3554
dst_alloc+0xbb/0x1d0 net/core/dst.c:104
__ip6_dst_alloc+0x35/0xa0 net/ipv6/route.c:361
ip6_dst_alloc+0x29/0xb0 net/ipv6/route.c:376
ip6_route_info_create+0x4d4/0x3a30 net/ipv6/route.c:2834
ip6_route_multipath_add+0xc7e/0x1910 net/ipv6/route.c:4240
inet6_rtm_newroute+0xe3/0x160 net/ipv6/route.c:4391
...

Freed by task 4555:
save_stack+0x43/0xd0 mm/kasan/kasan.c:448
set_track mm/kasan/kasan.c:460 [inline]
__kasan_slab_free+0x11a/0x170 mm/kasan/kasan.c:521
kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528
__cache_free mm/slab.c:3498 [inline]
kmem_cache_free+0x86/0x2d0 mm/slab.c:3756
dst_destroy+0x267/0x3c0 net/core/dst.c:140
dst_release_immediate+0x71/0x9e net/core/dst.c:205
fib6_add+0xa40/0x1650 net/ipv6/ip6_fib.c:1305
__ip6_ins_rt+0x6c/0x90 net/ipv6/route.c:1011
ip6_route_multipath_add+0x513/0x1910 net/ipv6/route.c:4267
inet6_rtm_newroute+0xe3/0x160 net/ipv6/route.c:4391
...

The problem is that rt_last can point to a deleted route if the insert
fails.

One reproducer is to insert a route and then add a multipath route that
has a duplicate nexthop.e.g,:
$ ip -6 ro add vrf red 2001:db8:101::/64 nexthop via 2001:db8:1::2
$ ip -6 ro append vrf red 2001:db8:101::/64 nexthop via 2001:db8:1::4 nexthop via 2001:db8:1::2

Fix by not setting rt_last until the it is verified the insert succeeded.

Backport Note:
- Upstream has replaced rt6_info usage with fib6_info in 8d1c802b281
("net/ipv6: Flip FIB entries to fib6_info")
- fib6_info_release was introduced upstream in 93531c674315
("net/ipv6: separate handling of FIB entries from dst based routes"),
but is not present in stable kernels; 4.14.y relies on dst_release/
ip6_rt_put/dst_release_immediate.

Fixes: 3b1137fe7482 ("net: ipv6: Change notifications for multipath add to RTA_MULTIPATH")
Cc: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Zubin Mithra <zsm@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Apply the GTT write flush for all !llc machines

commit c5ba5b24657e473b1c64b0a614b168a635a2c935 upstream.

We also see the delayed GTT write issue on i915g/i915gm, so let's
presume that it is a universal problem for all !llc machines, and that we
just haven't yet noticed on g33, gen4 and gen5 machines.

v2: Use a register that exists on all platforms

Testcase: igt/gem_mmap_gtt/coherency # i915gm
References: https://bugs.freedesktop.org/show_bug.cgi?id=102577
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170907184520.5032-1-chris@chris-wilson.co.uk
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: samsung: Fix invalid argument when devm_gpiod_get is called

commit 975b6a93088e83a41ba2f0dec2f086678fdb2a7a upstream.

devm_gpiod_get is called with GPIOF_OUT_INIT_LOW but the function doesn't
allow the parameters. Unluckily, GPIOF_OUT_INIT_LOW is same value as
GPIOD_ASIS and gpio direction isn't set properly.

Muted stream comes up when I try recording some sounds on TM2. mic-bias
gpiod state can't be changed because the gpiod is created with the invalid
parameter. The gpio should be set GPIOD_OUT_HIGH.

Fixes: 1bfbc260a5b4 ("ASoC: samsung: Add machine driver for Exynos5433 based TM2 board")
Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: samsung: i2s: Fix error handling path in i2s_set_sysclk()

commit 6431a7e36652517df82855ee79c8240001812a55 upstream.

If 'clk_prepare_enable()' fails, we must 'put' the corresponding clock.
Othewise, there is a resource leak.

Fixes: f5c97c7b0438 ("ASoC: samsung: i2s: Handle return value of clk_prepare_enable.")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

earlycon: Remove hardcoded port->uartclk initialization in of_setup_earlycon

commit 182ead3e418a20328b73152b8e81fc8b4cac3b0b upstream.

There is no reason to initialize uartclk to BASE_BAUD * 16 for DT based
systems.

[-stable comment: commit 31cb9a8575ca ("earlycon: initialise baud field
of earlycon device structure") has changed 8250_early.c behavior which
now tries to setup UART speed.
Already-backported upstream commit 0ff3ab701963 ("serial: 8250_early:
Only set divisor if valid clk & baud") handles properly uartclk not
being set but it still requires backporting fix for wrong uartclk val.
This fixes malformed early console output on arch-es with BASE_BAUD.]

Fixes: 31cb9a8575ca ("earlycon: initialise baud field of earlycon device structure")
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Tested-by: Matt Redfearn <matt.redfearn@mips.com>
[rmilecki: add -stable comment and Fixes tag]
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

earlycon: Initialize port->uartclk based on clock-frequency property

commit 814453adea7d081ad8917aa0f32d6a14165a3563 upstream.

On DT based platforms when current-speed property is present baudrate
is setup. Also port->uartclk is initialized to bogus BASE_BAUD * 16
value. Drivers like uartps/ns16550 contain logic when baudrate and
uartclk is used for baudrate calculation.

The patch is reading optional clock-frequency property to replace bogus
BASE_BAUD * 16 calculation to have proper baudrate calculation.

[-stable comment: commit 31cb9a8575ca ("earlycon: initialise baud field
of earlycon device structure") has changed 8250_early.c behavior which
now tries to setup UART speed. Ignoring clock-frequency results in
wrong value of calculated divisor & malformed early console output.]

Fixes: 31cb9a8575ca ("earlycon: initialise baud field of earlycon device structure")
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
[rmilecki: add -stable comment and Fixes tag]
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: bus: type promotion bug in mei_nfc_if_version()

commit b40b3e9358fbafff6a4ba0f4b9658f6617146f9c upstream.

We accidentally removed the check for negative returns
without considering the issue of type promotion.
The "if_version_length" variable is type size_t so if __mei_cl_recv()
returns a negative then "bytes_recv" is type promoted
to a high positive value and treated as success.

Cc: <stable@vger.kernel.org>
Fixes: 582ab27a063a ("mei: bus: fix received data size check in NFC fixup")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: tegra: bpmp: Don't crash when a clock fails to register

[ Upstream commit f7b3182232c82bb9769e2d5471d702bae2972d2b ]

When registering clocks, we just skip any that fail to register
(leaving a NULL hole in the clock table). However, our of_xlate
function still tries to dereference each entry while looking for
the clock with the requested id, causing a crash if any clocks
failed to register. Add a check to of_xlate to skip any NULL
clocks.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: qcom: spmi-gpio: Fix pmic_gpio_config_get() to be compliant

[ Upstream commit 1cf86bc21257a330e3af51f2a4e885f1a705f6a5 ]

If you do this on an sdm845 board:
  grep "" /sys/kernel/debug/pinctrl/*spmi:pmic*/pinconf-groups

...it looks like nonsense.  For every pin you see listed:
  input bias disabled, input bias high impedance, input bias pull down, input bias pull up, ...

That's because pmic_gpio_config_get() isn't complying with the rules
that pinconf_generic_dump_one() expects.  Specifically for boolean
parameters (anything with a "struct pin_config_item" where has_arg is
false) the function expects that the function should return its value
not through the "config" parameter but should return "0" if the value
is set and "-EINVAL" if the value isn't set.

Let's fix this.

>From a quick sample of other pinctrl drivers, it appears to be
tradition to also return 1 through the config parameter for these
boolean parameters when they exist.  I'm not one to knock tradition,
so I'll follow tradition and return 1 in these cases.  While I'm at
it, I'll also continue searching for four leaf clovers, kocking on
wood three times, and trying not to break mirrors.

NOTE: This also fixes an apparent typo for reading
PIN_CONFIG_BIAS_DISABLE where the old driver was accidentally
using "=" instead of "==" and thus was setting some internal
state when you tried to query PIN_CONFIG_BIAS_DISABLE.  Oops.

Fixes: eadff3024472 ("pinctrl: Qualcomm SPMI PMIC GPIO pin controller driver")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: msm: Fix msm_config_group_get() to be compliant

[ Upstream commit 05e0c828955c1cab58dd71a04539442e5375d917 ]

If you do this on an sdm845 board:
  cat /sys/kernel/debug/pinctrl/3400000.pinctrl/pinconf-groups

...it looks like nonsense.  For every pin you see listed:
  input bias bus hold, input bias disabled, input bias pull down, input bias pull up

That's because msm_config_group_get() isn't complying with the rules
that pinconf_generic_dump_one() expects.  Specifically for boolean
parameters (anything with a "struct pin_config_item" where has_arg is
false) the function expects that the function should return its value
not through the "config" parameter but should return "0" if the value
is set and "-EINVAL" if the value isn't set.

Let's fix this.

>From a quick sample of other pinctrl drivers, it appears to be
tradition to also return 1 through the config parameter for these
boolean parameters when they exist.  I'm not one to knock tradition,
so I'll follow tradition and return 1 in these cases.  While I'm at
it, I'll also continue searching for four leaf clovers, kocking on
wood three times, and trying not to break mirrors.

Fixes: f365be092572 ("pinctrl: Add Qualcomm TLMM driver")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

blk-mq: avoid to synchronize rcu inside blk_cleanup_queue()

[ Upstream commit 1311326cf4755c7ffefd20f576144ecf46d9906b ]

SCSI probing may synchronously create and destroy a lot of request_queues
for non-existent devices. Any synchronize_rcu() in queue creation or
destroy path may introduce long latency during booting, see detailed
description in comment of blk_register_queue().

This patch removes one synchronize_rcu() inside blk_cleanup_queue()
for this case, commit c2856ae2f315d75(blk-mq: quiesce queue before freeing queue)
needs synchronize_rcu() for implementing blk_mq_quiesce_queue(), but
when queue isn't initialized, it isn't necessary to do that since
only pass-through requests are involved, no original issue in
scsi_execute() at all.

Without this patch and previous one, it may take more 20+ seconds for
virtio-scsi to complete disk probe. With the two patches, the time becomes
less than 100ms.

Fixes: c2856ae2f315d75 ("blk-mq: quiesce queue before freeing queue")
Reported-by: Andrew Jones <drjones@redhat.com>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Cc: linux-scsi@vger.kernel.org
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Tested-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

blk-mq: only attempt to merge bio if there is rq in sw queue

[ Upstream commit b04f50ab8a74129b3041a2836c33c916be3c6667 ]

Only attempt to merge bio iff the ctx->rq_list isn't empty, because:

1) for high-performance SSD, most of times dispatch may succeed, then
there may be nothing left in ctx->rq_list, so don't try to merge over
sw queue if it is empty, then we can save one acquiring of ctx->lock

2) we can't expect good merge performance on per-cpu sw queue, and missing
one merge on sw queue won't be a big deal since tasks can be scheduled from
one CPU to another.

Cc: Laurence Oberman <loberman@redhat.com>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Tested-by: Kashyap Desai <kashyap.desai@broadcom.com>
Reported-by: Kashyap Desai <kashyap.desai@broadcom.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/panel: type promotion bug in s6e8aa0_read_mtp_id()

[ Upstream commit cd0e0ca69109d025b1a1b6609f70682db62138b0 ]

The ARRAY_SIZE() macro is type size_t. If s6e8aa0_dcs_read() returns a
negative error code, then "ret < ARRAY_SIZE(id)" is false because the
negative error code is type promoted to a high positive value.

Fixes: 02051ca06371 ("drm/panel: add S6E8AA0 driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180704093807.s3lqsb2v6dg2k43d@kili.mountain
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftest: timers: Tweak raw_skew to SKIP when ADJ_OFFSET/other clock adjustments are in progress

[ Upstream commit 1416270f4a1ae83ea84156ceba19a66a8f88be1f ]

In the past we've warned when ADJ_OFFSET was in progress, usually
caused by ntpd or some other time adjusting daemon running in non
steady sate, which can cause the skew calculations to be
incorrect.

Thus, this patch checks to see if the clock was being adjusted
when we fail so that we don't cause false negatives.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Suggested-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: libfc: fixup 'sleeping function called from invalid context'

[ Upstream commit fa519f701d27198a2858bb108fc18ea9d8c106a7 ]

fc_rport_login() will be calling mutex_lock() while running inside an
RCU-protected section, triggering the warning 'sleeping function called
from invalid context'. To fix this we can drop the rcu functions here
altogether as the disc mutex protecting the list itself is already held,
preventing any list manipulation.

Fixes: a407c593398c ("scsi: libfc: Fixup disc_mutex handling")
Signed-off-by: Hannes Reinecke <hare@suse.com>
Acked-by: Johannes Thumshirn <jth@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: pcm: Fix snd_interval_refine first/last with open min/max

[ Upstream commit ff2d6acdf6f13d9f8fdcd890844c6d7535ac1f10 ]

Without this commit the following intervals [x y), (x y) were be
replaced to (y-1 y) by snd_interval_refine_last(). This was also done
if y-1 is part of the previous interval.
With this changes it will be replaced with [y-1 y) in case of y-1 is
part of the previous interval. A similar behavior will be used for
snd_interval_refine_first().

This commit adapts the changes for alsa-lib of commit
9bb985c ("pcm: snd_interval_refine_first/last: exclude value only if
also excluded before")

Signed-off-by: Timo Wischer <twischer@de.adit-jv.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: bq4802: add error handling for devm_ioremap

[ Upstream commit 7874b919866ba91bac253fa219d3d4c82bb944df ]

When devm_ioremap fails, the lack of error-handling code may
cause unexpected results.

This patch adds error-handling code after calling devm_ioremap.

Signed-off-by: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdkfd: Fix error codes in kfd_get_process

[ Upstream commit e47cb828eb3fca3e8999a0b9aa053dda18552071 ]

Return ERR_PTR(-EINVAL) if kfd_get_process fails to find the process.
This fixes kernel oopses when a child process calls KFD ioctls with
a file descriptor inherited from the parent process.

Signed-off-by: Wei Lu <wei.lu2@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

input: rohm_bu21023: switch to i2c_lock_bus(..., I2C_LOCK_SEGMENT)

[ Upstream commit 193c2a07cfaacb9249ab0e3d34bce32490879355 ]

Locking the root adapter for __i2c_transfer will deadlock if the
device sits behind a mux-locked I2C mux. Switch to the finer-grained
i2c_lock_bus with the I2C_LOCK_SEGMENT flag. If the device does not
sit behind a mux-locked mux, the two locking variants are equivalent.

Signed-off-by: Peter Rosin <peda@axentia.se>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mfd: 88pm860x-i2c: switch to i2c_lock_bus(..., I2C_LOCK_SEGMENT)

[ Upstream commit 8c8f74f327a76604a499fad8c54c15e1c0ee8051 ]

Locking the root adapter for __i2c_transfer will deadlock if the
device sits behind a mux-locked I2C mux. Switch to the finer-grained
i2c_lock_bus with the I2C_LOCK_SEGMENT flag. If the device does not
sit behind a mux-locked mux, the two locking variants are equivalent.

Signed-off-by: Peter Rosin <peda@axentia.se>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpiolib: Mark gpio_suffixes array with __maybe_unused

[ Upstream commit b23ec59926faf05b0c43680d05671c484e810ac4 ]

Since we put static variable to a header file it's copied to each module
that includes the header. But not all of them are actually used it.

Mark gpio_suffixes array with __maybe_unused to hide a compiler warning:

In file included from
drivers/gpio/gpiolib-legacy.c:6:0:
drivers/gpio/gpiolib.h:95:27: warning: ‘gpio_suffixes’ defined but not used [-Wunused-const-variable=]
static const char * const gpio_suffixes[] = { "gpios", "gpio" };
^~~~~~~~~~~~~
In file included from drivers/gpio/gpiolib-devprop.c:17:0:
drivers/gpio/gpiolib.h:95:27: warning: ‘gpio_suffixes’ defined but not used [-Wunused-const-variable=]
static const char * const gpio_suffixes[] = { "gpios", "gpio" };
^~~~~~~~~~~~~

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpio: pxa: Fix potential NULL dereference

[ Upstream commit 9506755633d0b32ef76f67c345000178e9b0dfc4 ]

platform_get_resource() may fail and return NULL, so we should
better check it's return value to avoid a NULL pointer dereference
a bit later in the code.

This is detected by Coccinelle semantic patch.

@@
expression pdev, res, n, t, e, e1, e2;
@@

res = platform_get_resource(pdev, t, n);
+ if (!res)
+ return -EINVAL;
... when != res == NULL
e = devm_ioremap(e1, res->start, e2);

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm2835-audio: Don't leak workqueue if open fails

[ Upstream commit 678c5b119307c40f9a17152512f9c949d0ec7292 ]

Currently, if bcm2835_audio_open() fails partway, the allocated
workqueue is leaked. Avoid that.

While at it, propagate the return value of
bcm2835_audio_open_connection() on failure instead of returning -1.

Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

coresight: ETM: Add support for Arm Cortex-A73 and Cortex-A35

[ Upstream commit 5cedd22370a0a460b663c06de1fc10b4ba3c5d0b ]

Add ETM PIDs of the Arm cortex-A CPUs to the white list of ETMs.
While at it add a helper macro to make it easier to add the new
entries.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

coresight: tpiu: Fix disabling timeouts

[ Upstream commit ccff2dfaceaca4517432f5c149594215fe9098cc ]

Probing the TPIU driver under UBSan triggers an out-of-bounds shift
warning in coresight_timeout():

...
[ 5.677530] UBSAN: Undefined behaviour in drivers/hwtracing/coresight/coresight.c:929:16
[ 5.685542] shift exponent 64 is too large for 64-bit type 'long unsigned int'
...

On closer inspection things are exponentially out of whack because we're
passing a bitmask where a bit number should be. Amusingly, it seems that
both calls will find their expected values by sheer luck and appear to
succeed: 1 << FFCR_FON_MAN ends up at bit 64 which whilst undefined
evaluates as zero in practice, while 1 << FFSR_FT_STOPPED finds bit 2
(TCPresent) which apparently is usually tied high.

Following the examples of other drivers, define separate FOO and FOO_BIT
macros for masks vs. indices, and put things right.

CC: Robert Walker <robert.walker@arm.com>
CC: Mike Leach <mike.leach@linaro.org>
CC: Mathieu Poirier <mathieu.poirier@linaro.org>
Fixes: 11595db8e17f ("coresight: Fix disabling of CoreSight TPIU")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

coresight: Handle errors in finding input/output ports

[ Upstream commit fe470f5f7f684ed15bc49b6183a64237547910ff ]

If we fail to find the input / output port for a LINK component
while enabling a path, we should fail gracefully rather than
assuming port "0".

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched/fair: Fix util_avg of new tasks for asymmetric systems

[ Upstream commit 8fe5c5a937d0f4e84221631833a2718afde52285 ]

When a new task wakes-up for the first time, its initial utilization
is set to half of the spare capacity of its CPU. The current
implementation of post_init_entity_util_avg() uses SCHED_CAPACITY_SCALE
directly as a capacity reference. As a result, on a big.LITTLE system, a
new task waking up on an idle little CPU will be given ~512 of util_avg,
even if the CPU's capacity is significantly less than that.

Fix this by computing the spare capacity with arch_scale_cpu_capacity().

Signed-off-by: Quentin Perret <quentin.perret@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dietmar.eggemann@arm.com
Cc: morten.rasmussen@arm.com
Cc: patrick.bellasi@arm.com
Link: http://lkml.kernel.org/r/20180612112215.25448-1-quentin.perret@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parport: sunbpp: fix error return code

[ Upstream commit faa1a47388b33623e4d504c23569188907b039a0 ]

Return an error code on failure. Change leading spaces to tab on the
first if.

Problem found using Coccinelle.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau: tegra: Detach from ARM DMA/IOMMU mapping

[ Upstream commit b59fb482b52269977ee5de205308e5b236a03917 ]

Depending on the kernel configuration, early ARM architecture setup code
may have attached the GPU to a DMA/IOMMU mapping that transparently uses
the IOMMU to back the DMA API. Tegra requires special handling for IOMMU
backed buffers (a special bit in the GPU's MMU page tables indicates the
memory path to take: via the SMMU or directly to the memory controller).
Transparently backing DMA memory with an IOMMU prevents Nouveau from
properly handling such memory accesses and causes memory access faults.

As a side-note: buffers other than those allocated in instance memory
don't need to be physically contiguous from the GPU's perspective since
the GPU can map them into contiguous buffers using its own MMU. Mapping
these buffers through the IOMMU is unnecessary and will even lead to
performance degradation because of the additional translation. One
exception to this are compressible buffers which need large pages. In
order to enable these large pages, multiple small pages will have to be
combined into one large (I/O virtually contiguous) mapping via the
IOMMU. However, that is a topic outside the scope of this fix and isn't
currently supported. An implementation will want to explicitly create
these large pages in the Nouveau driver, so detaching from a DMA/IOMMU
mapping would still be required.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>