[COMMON] g2d: add request the job and schedule

This patch implements the life cycle of a task to G2D. A task has a
completion object to signal the user's request to let it know if its
requested task is completed.
All tasks are pushed to a workqueue that pushes tasks to H/W. It is
required for the tasks that have fences to wait because G2D driver
waits fences asynchronously Because the callback function called when
a fence is signaled is invoked under irq disabled. For the simplicity,
tasks without fences are also pushed to the workqueue because it does
not harm the responsibility to the users seriously.

Change-Id: I3c7ac1cc18212c3ea4b9a22d78a9236ee8491567
Signed-off-by: hyesoo.yu <hyesoo.yu@samsung.com>
Signed-off-by: Cho KyongHo <pullip.cho@samsung.com>

[COMMON] g2d: add task management

G2D driver does not configure SFRs of G2D from the image processing
information from userspace. It just verifies a set of SFR values from
userspace and forwards to H/W the SFR values.
The possible number of SFR values is 830, and H/W limits the number to
1024, we have decided to maintain the pools of the buffers to store
the SFR values from userspace because allocation of 8KB at run-time
may consume a lot of time.
We also decided to create 16 buffers to store the SFR values which is
called 'Command list' because G2D H/W accepts 16 compositing jobs in
maximum.
We call entries in the pool as 'task' and a task has the following
elements:
- JOB ID that is used by H/W to distinguish jobs
- Descriptions of 16 source layers and the target image
- Buffer descriptions of each layer
- Command list

The life time of a task:
A new task is registered to tasks_free list of g2d_device. If a
compositing job is requested by userspace, G2D driver pulls a task
from tasks_free list and configures the task for the requested
compositing. When the configuration is finished, the task is
registered to tasks_prepared list. Therefore all tasks registered to
tasks_prepared are ready to be pushed to H/W. If a task should be wait
for fences to be signaled, it is not registered to tasks_prepared list
until the fence is signaled. As a result, tasks are listed in
tasks_prepared in a very short time except the system is falling into
suspend to RAM. The tasks remained in tasks_prepared are pushed to the
H/W as soon as the system is woken up from supend to RAM.
When H/W completes composting of a pushed task, it is removed from
tasks_active and returned to tasks_free.

The implemetation of the life cycle of tasks is included in the
following patch series.

Change-Id: I38f11020fc27e48c05d05e39ed9dc9ae28f9eb58
Signed-off-by: hyesoo.yu <hyesoo.yu@samsung.com>
Signed-off-by: Cho KyongHo <pullip.cho@samsung.com>

[COMMON] g2d: add skeleton driver

FIMG2D driver is just probed with the following initializations:
- A character device node is created under /dev/g2d
- SFR base is remapped and the interrupt handler is registered
- Runtime PM is enabled
- H/W Version is read
- IOMMU is attached

Change-Id: I7af02ef7013bdc90ee8750e4da3d44e01517d1c9
Signed-off-by: hyesoo.yu <hyesoo.yu@samsung.com>
Signed-off-by: Cho KyongHo <pullip.cho@samsung.com>

[9610][ERD] arm64: dts: change console destination to ram

Change-Id: Ifc5d32e14a646dcc567d85305b47b533e87f4bf1
Signed-off-by: Youngmin Nam <youngmin.nam@samsung.com>

[COMMON] scsi: ufs: fix clang warning

This patch resolve below waring.

warning: implicit conversion from 'unsigned long' to 'int' changes
         value from 18446744073709551615 to -1 [-Wconstant-conversion]

Change-Id: I88e9f844dfdbb310eb4bb1a5ac85d14a2eafe53c
Signed-off-by: JaeHun Jung <jh0801.jung@samsung.com>

[9610] soc: samsung: cal-if: add volatile keyword to prevent optimization by clang compiler

In the CLANG compiler, "pr_info("  mif grp : %d\n", asv_tbl->mif_asv_group);" makes panic as below.

[    0.000000]  [0:      swapper/0:    0] Unable to handle kernel paging request at virtual address ffffff8008015006
[    0.000000]  [0:      swapper/0:    0] Mem abort info:
[    0.000000]  [0:      swapper/0:    0]   Exception class = DABT (current EL), IL = 32 bits
[    0.000000]  [0:      swapper/0:    0]   SET = 0, FnV = 0
[    0.000000]  [0:      swapper/0:    0]   EA = 0, S1PTW = 0
[    0.000000]  [0:      swapper/0:    0] Data abort info:
[    0.000000]  [0:      swapper/0:    0]   ISV = 0, ISS = 0x00000021
[    0.000000]  [0:      swapper/0:    0]   CM = 0, WnR = 0
[    0.000000]  [0:      swapper/0:    0] swapper pgtable: 4k pages, 39-bit VAs, pgd = ffffff8009af1000
[    0.000000]  [0:      swapper/0:    0] [ffffff8008015006] *pgd=00000008fd7fe003, *pud=00000008fd7fe003, *pmd=00000008fd7fd003, *pte=00e8000010009707
[    0.000000]  [0:      swapper/0:    0] Internal error: Oops: 96000021 [#1] PREEMPT SMP
[    0.000000]  [0:      swapper/0:    0] Modules linked in:
[    0.000000]  [0:      swapper/0:    0] debug-snapshot: item - log_kevents is disabled
[    0.000000]  [0:      swapper/0:    0] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.14.32-34884-g2fc291f958c6 #1
[    0.000000]  [0:      swapper/0:    0] Hardware name: Samsung ERD9610 board based on EXYNOS9610 (DT)
[    0.000000]  [0:      swapper/0:    0] task: ffffff8008fd9380 task.stack: ffffff8008fb0000
[    0.000000]  [0:      swapper/0:    0] PC is at asv_table_init+0xcc/0x1b4
[    0.000000]  [0:      swapper/0:    0] LR is at asv_table_init+0xc0/0x1b4
[    0.000000]  [0:      swapper/0:    0] pc : [<ffffff8008447f30>] lr : [<ffffff8008447f24>] pstate: 604000c5
[    0.000000]  [0:      swapper/0:    0] sp : ffffff8008fb3e20
[    0.000000]  [0:      swapper/0:    0] x29: ffffff8008fb3e40 x28: 0000000080bd0018
[    0.000000]  [0:      swapper/0:    0] x27: 0000000000000000 x26: 0000000000000001
[    0.000000]  [0:      swapper/0:    0] x25: ffffff8008fb3f20 x24: dead000000000100
[    0.000000]  [0:      swapper/0:    0] x23: ffffff8008fb3f20 x22: 0000000000000000
[    0.000000]  [0:      swapper/0:    0] x21: ffffff8009a6d000 x20: ffffff8009125000
[    0.000000]  [0:      swapper/0:    0] x19: 00e8000000000707 x18: 000000000000186a
[    0.000000]  [0:      swapper/0:    0] x17: ffffff8100d020c8 x16: 0000000000000000
[    0.000000]  [0:      swapper/0:    0] x15: 00000000fffffff5 x14: ffffff8009a12000
[    0.000000]  [0:      swapper/0:    0] x13: ffffff8008fd9ca8 x12: 00000000ffffffbf
[    0.000000]  [0:      swapper/0:    0] x11: 0000000000000000 x10: 0000000000000000
[    0.000000]  [0:      swapper/0:    0] x9 : b6a063fd53402b00 x8 : ffffff8008015000
[    0.000000]  [0:      swapper/0:    0] x7 : 0000000000000000 x6 : ffffff80081222f8
[    0.000000]  [0:      swapper/0:    0] x5 : 0000000000000000 x4 : 0000000000000080
[    0.000000]  [0:      swapper/0:    0] x3 : ffffff8008fb3a34 x2 : 0000000000000001
[    0.000000]  [0:      swapper/0:    0] x1 : 0000000000000001 x0 : ffffff8008aeccc2

To resolve this issue, we should add volatile keyword to struct variables.

Change-Id: I6e97594253ef04f7b76365fd685aea09446bbd9f
Signed-off-by: Youngmin Nam <youngmin.nam@samsung.com>

[COMMON] ufs: fix build error in clang compiler

Equality comparison with extraneous parentheses error fixed.

Change-Id: Iae6545f83d379080a7ebe5a414481bed6f8bd5ff
Signed-off-by: hgchu <hg.chu@samsung.com>

ANDROID: qtaguid: remove unnecessary checkes.

This removes some unnecessary checkes to get rid of
-Werror,-Wpointer-bool-conversion error

Change-Id: I8ce82d5c5761456055cc9c53d50ca9eee19d8660
signed-off-by: Hyunki Koo <hyunki00.koo@samsung.com>

[9610][ERD] arm64: configs: disable CONFIG_PHONET

This patch disables CONFIG_PHONET to resolve build warning
in case of clang build

Change-Id: I1f84231be5b80131ccb23afb57f7de2776017237
Signed-off-by: Youngmin Nam <youngmin.nam@samsung.com>

[COMMON] soc: samsung: Add EXYNOS_SDM to Kconfig

Change-Id: I15843f08b30b342e2b7d81951484449d0b78c7f6
Signed-off-by: Keunyoung Park <keun0.park@samsung.com>

[COMMON] soc: samsung: add codes for Security Dump Manager

Change-Id: I9863edba61b8f35c0407f809ab03abab9ea61d63
Signed-off-by: Keunyoung Park <keun0.park@samsung.com>

[9610] arm64: defconfig: add config for hwrng

Change-Id: Ifc49ae755ba425caa1462c0798305b930e566cbb
Signed-off-by: Keunyoung Park <keun0.park@samsung.com>

[COMMON] ExyRNG: modify the smc function to follow call by reference

Change-Id: I7434a62180f34b1f82d7e21a33f58bed83e33f64
Signed-off-by: Keunyoung Park <keun0.park@samsung.com>

[COMMON] hw_random: change exynos_smc to __exynos_smc.

it is modified to avoid corrupting x1, x2, x3.

Change-Id: I903ab54f00a6ec14f1d8212d19ac71dc1db54897
Signed-off-by: Keunyoung Park <keun0.park@samsung.com>

[COMMON] hw_random: make khwrngd freezable

Change-Id: I8bc0b1561dc8b3d36fec860b0b969129326c334d
Signed-off-by: Keunyoung Park <keun0.park@samsung.com>

[COMMON] hw_random: add exyswd-rng's config in Kconfig and Makefile

Change-Id: I7302ad3228fefedee3d51023d633d82b203da9c0
Signed-off-by: Keunyoung Park <keun0.park@samsung.com>

[COMMON] hw_random: add exyswd-rng in kernel 4.14

Change-Id: I4f2c9726d8253e3820a8c62cd482137707df65cf
Signed-off-by: Keunyoung Park <keun0.park@samsung.com>

[9610] hdcp: add initial hdcp2

Change-Id: I1af03165b61d864b38e7993db3158f413072ea90
Signed-off-by: Taein, An <taein.an@samsung.com>

[COMMON] scsi: srpmb: enable SMC call for WSM init

[Issue#]

[Description]

Platform Development Team
Shinkyu Park (shinkyu.park@samsung.com)

Change-Id: I3e3117c4ca12b5bf84b5fbb1105e79b1165e0309

[9610] arm64: dts: add RPMB attribute

[Issue#]

[Description]

Platform Development Team
Shinkyu Park (shinkyu.park@samsung.com)

Change-Id: I5908b73c5460188391afb640cbf186f36b5e99bb

[9610] arm64: erd9610_defconfig: Enable UFS_SRPMB

[Issue#]

[Description]

Platform Development Team
Shinkyu Park (shinkyu.park@samsung.com)

Change-Id: I376a0c21b053f24e8970450a3b6f857b38a6aa24

drivers: soc: samsung: Add EXYNOS_CONTENT_PATH_PROTECTION

Change-Id: Ieffb1ace1e772a553e982f3b756d85fdb30fe391
Signed-off-by: DongHyun Cha <dhyun.cha@samsung.com>

[9610][ERD] arm64: configs: enable fmp

Change-Id: If0d971c87d0452c97b3b4f23afe2525ce6644ba4
Signed-off-by: Boojin Kim <boojin.kim@samsung.com>

[9610][ERD] arm64: dts: fmp enable

Change-Id: I7d3727c8fe83692b119f31512974c35f6fa39e0b
Signed-off-by: Boojin Kim <boojin.kim@samsung.com>

[COMMON] fmp: update diskcipher free_req

Change-Id: I412c28c5356f815eefa27487613249c33823970f
Signed-off-by: Boojin Kim <boojin.kim@samsung.com>

[COMMON] ufs: add diskcipher debug

Change-Id: I0712835f8223596f16f370e2ea89fe00f28a4c6a
Signed-off-by: Boojin Kim <boojin.kim@samsung.com>

[COMMON] bio: update diskcipher merge

Change-Id: I2477d73096105517e0c40cc21b3bfa83c7941dd4
Signed-off-by: Boojin Kim <boojin.kim@samsung.com>

[COMMON] crypto: update diskcipher free and debug

Change-Id: I43447d93662c4c8978cab634441a146f7e45c13b
Signed-off-by: Boojin Kim <boojin.kim@samsung.com>

[COMMON] fs: add diskcipher free_req and debug

Change-Id: Ib5cfb98ed1b0ac43eff6ec3d9cbe3507a191b7b5
Signed-off-by: Boojin Kim <boojin.kim@samsung.com>

[COMMON] fs: support diskcipher

Change-Id: I19caef3696973a6aa3dbdad9cf53a6f72cdb0fce
Signed-off-by: Boojin Kim <boojin.kim@samsung.com>

[COMMON] fmp: support integrity check and clang

fips: fix compile error with clag
add fips init status
fix build error for gcc compiler
fix build error on clang
support integrity check

Change-Id: I3fd3255b5e14b3166980b6a2789febcfd98a7f7f
Signed-off-by: Boojin Kim <boojin.kim@samsung.com>

[COMMON] ufs: support the multi-host for fmp

Change-Id: I436f3bc3b420a4814c33f66bb0af7bc9bea66d58
Signed-off-by: Boojin Kim <boojin.kim@samsung.com>

[COMMON] fmp: update multi-host for fmp

Change-Id: Ib2bd3264d07eb6dabb874a5062a16a3d7a2b7d10
Signed-off-by: Boojin Kim <boojin.kim@samsung.com>

[COMMON] dm crypt: support diskcipher

dm crypt: support diskcipher
dm crypt: add 'fmp' ivmode for diskcipher

Change-Id: Ic03c62e02108dec2e00975bd6df1fca8b44792d8
Signed-off-by: Boojin Kim <boojin.kim@samsung.com>

[DO NOT RELEASE][9610] drivers: gud: add gud driver

Change-Id: I6e854a4957b5835b28ce8a76da47d349381db8bb
Signed-off-by: Kim Mankyum <mankyum.kim@samsung.com>

[9610] drivers: add Kconfig source path

Change-Id: I5802e77766671fb9377d8dbeb393cb110902582a
Signed-off-by: Kim Mankyum <mankyum.kim@samsung.com>

[9610] dts : add exynos-tee

Change-Id: I4efcbb35ed1fcf1777f4186e8f68e2414b5fb3af
Signed-off-by: Kim Mankyum <mankyum.kim@samsung.com>

[COMMON] soc: samsung: add code which prints GPR values.

prints GPR value passed by El3 monitor.

Change-Id: I13ab808a3ad5b9aa7c0c29e946fb8192a5bbe155
Signed-off-by: Jang Hyunsung <hs79.jang@samsung.com>

[9610] arm64: erd9610_defconfig: Enable kernel code protection

Change-Id: Ieb35340761e88a40f2e0d066b15c3f69b3efc40f
Signed-off-by: Junho Choi <junhosj.choi@samsung.com>

[COMMON] soc: samsung: el3_mon: Use __pa_symbol for _text and _etext

If CONFIG_DEBUG_VIRTUAL=y,

virt_to_phys used for non-linear address: ffffff8008080000 (0xffffff8008080000)
WARNING: CPU: 4 PID: 1 at arch/arm64/mm/physaddr.c:15 __virt_to_phys+0x28/0x60
...
[<ffffff80080a32bc>] __virt_to_phys+0x28/0x60
[<ffffff8008b61774>] exynos_protect_kernel_text+0x28/0x10c

virt_to_phys used for non-linear address: ffffff8008830000 (_etext+0x0/0x10)
WARNING: CPU: 4 PID: 1 at arch/arm64/mm/physaddr.c:15 __virt_to_phys+0x28/0x60
...
[<ffffff80080a32bc>] __virt_to_phys+0x28/0x60
[<ffffff8008b6178c>] exynos_protect_kernel_text+0x40/0x10c

Change-Id: Idf0e69942e2117b31befd71ff212e906df7af370
Signed-off-by: Junho Choi <junhosj.choi@samsung.com>

[COMMON] soc: samsung: el3_mon: change the way to get VA of _text and _etext

The start and end address of kernel text section were got
from kallsyms_lockup_name which returns the address correspond
to symbol name exported by EXPORT_SYMBOL. So, the address can't
be got if the symbol is not exported.

This patch changes the way to get the start and end addresses of
kernel text section to reading them directly. It is possible
because they have been defined in linker script. The driver
can always get them even if the symbol is not exported.

Change-Id: Ibe3ef81ff5010db55af2db11f07cd1b82e1e6685
Signed-off-by: Junho Choi <junhosj.choi@samsung.com>

[COMMON] soc: samsung: Add kernel protection feature to Kconfig

Change-Id: If92f71b97bf3029c19a11d038a1f451e7ec1fa70
Signed-off-by: Junho Choi <junhosj.choi@samsung.com>

[COMMON] soc: samsung: seclog: Refactoring LDFW error handling

The previous handling error from LDFW has many if ~ else and
switch statement. It needs refactoring.

Change-Id: I86d36bb94d00a70c3b6cb33a5eebeddd23986174
Signed-off-by: Junho Choi <junhosj.choi@samsung.com>

[COMMON] soc: samsung: seclog: Change kmalloc to kmalloc_array

Change-Id: Iaf84105a5a5516619cd7af67842ea1a2ba4b0a92
Signed-off-by: Junho Choi <junhosj.choi@samsung.com>

[COMMON] soc: samsung: seclog: Change for loop with NR_CPUS to for_each_possible_cpu()

Kernel checkpatch recommends that using for_each_possible_cpu()
is better than NR_CPUS because NR_CPUS is often wrong.

Change-Id: I7f73d46add74f3b7335b22f4c1acf6303064ba94
Signed-off-by: Junho Choi <junhosj.choi@samsung.com>

[9610] arm64: dts: Define size macros regarding seclog in dt-bindings

The size macros need to be defined in device tree files.

Change-Id: Ibc50e7dfc5f2bac65cd623a814dff260f4151aa5
Signed-off-by: Junho Choi <junhosj.choi@samsung.com>

[9610] arm64: dts: Add secure log property

Change-Id: I6d7310bd09402ac89c846738030121b0a7bc5592
Signed-off-by: Junho Choi <junhosj.choi@samsung.com>

[COMMON] soc: samsung: seclog: Add Secure log driver

Change-Id: I08dcd4562893b9e4dc233db8cdd2556431c4d273
Signed-off-by: Junho Choi <junhosj.choi@samsung.com>

[9610] arm64: erd9610_defconfig: Enable CPU_FREQ_STAT.

Change-Id: I43c5bbedfe7caa72a92ee3f3f6fcf42db59ffc96
Signed-off-by: lakkyung.jung <lakkyung.jung@samsung.com>

[COMMON] soc: samsung: Fix the problem of passing wrong cluster id

Change-Id: I6f5201c5760d569f753a8f0d0c4b32132de370c9
Signed-off-by: lakkyung.jung <lakkyung.jung@samsung.com>

[COMMON] soc: samsung: Add featuring to CPUIDLE.

Change-Id: Ied3e9608b57f94ae9ed5aab8936482f03de7c303
Signed-off-by: lakkyung.jung <lakkyung.jung@samsung.com>

Revert "[HACK] soc: samsung: Fixed cluster id when hotplug in/out."

This reverts commit 85b083cc30a41b12e7b66fd1ef0e681be58931a4.

Change-Id: Ie06d4f0a6a7eb15c81c62c3d0dc34be979213581

[9610] arm64: erd9610_defconfig: Enable GPU THERMAL config.

Change-Id: I52cb108ef76d3b0fd5de2de269c4ca09a2080cd6
Signed-off-by: Chungwoo Park <cww.park@samsung.com>

[COMMON] tmu: applying new cpu hotplug driver

Change-Id: I487de186f492087c87d5b57db53c7619cd118cba
Signed-off-by: Youngtae Lee <yt0729.lee@samsung.com>

[HACK] soc: samsung: Fixed cluster id when hotplug in/out.

Change-Id: Id54965dfe864946f89a5b27f82d88dc03fa9edd7
Signed-off-by: Jang JeongHoon <jnghn.jang@samsung.com>

[9610] arm64: dtsi: Fixed sleep psci index.

Change-Id: Ice14745463853905fdbcad3a920043e9d67ce6da
Signed-off-by: Jang JeongHoon <jnghn.jang@samsung.com>

[9610] defconfig: enable dvfs and rtpm of mali gpu

Change-Id: I7a149d6621455d87d7deaf66286a57c4a01c12f6
Signed-off-by: Jinku Kang <jinku79.kang@samsung.com>

[9610] gpu: tHEx: r10p0: update definition for pm-qos cpu

Change-Id: Ib2c74c4f857c7b4db615928b66f274a850f38fbf
Signed-off-by: Jinku Kang <jinku79.kang@samsung.com>

[9610][MAESTRO] driver: muic: remove muic func in panic handler

Change-Id: Ibd63c80f59ed9e45bf9a671c77af41133616b20f
Signed-off-by: Kim Taejeong <tj.kim@samsung.com>

[COMMON] soc: samsung: Bring up power mode.

Change-Id: I665745e3b8c65c3dcca730463d91293f6835558f
Signed-off-by: lakkyung.jung <lakkyung.jung@samsung.com>

[COMMON] soc: cpupm: move location of notify call for sicd.

Change-Id: Ie37c5d079cb5bb84154df30774b5580a49c988b7
Signed-off-by: lakkyung.jung <lakkyung.jung@samsung.com>

[COMMON] soc: samsung: Change EINT_WAKEUP_MASK to 0x650

Change-Id: Ie4423fbbc95ed80a43082734226aa922d5b39cc6
Signed-off-by: lakkyung.jung <lakkyung.jung@samsung.com>

soc: exynos-powermode: add macro for syspwr mode searching

Change-Id: Iab5e97a8745fe7a26acdfb02eff0e2895408edc7
Signed-off-by: Soohyun Kim <soohyuni.kim@samsung.com>

[COMMON] soc: samsung: Change debug log to dbg_snapshot.

Change-Id: I0143f0dc4b2b843f2602955d873662daf63ef82e
Signed-off-by: lakkyung.jung <lakkyung.jung@samsung.com>

soc: cpupm: fix race condition when call at the same time.

Change-Id: If5fd174b48e79e4aae7180d1558b014d53cb2e22
Signed-off-by: Soohyun Kim <soohyuni.kim@samsung.com>

[COMMON] CPUPM: change header file name of power management

Change-Id: I4dc2c39d118e16cb81a768d6d3d79ad91e058f93
Signed-off-by: lakkyung.jung <lakkyung.jung@samsung.com>

[COMMON] soc: samsung: remove code related cpu power management.

Change-Id: Id8d63959300a429364e5ec2da8d8e4315685826b
Signed-off-by: lakkyung.jung <lakkyung.jung@samsung.com>

[9610] arm64: dts: add node for cpuidle.

Change-Id: Ibc29ca2e7dfc5e0502cc8f80500313b67c79172b
Signed-off-by: lakkyung.jung <lakkyung.jung@samsung.com>

[COMMON] pinctrl: Added `exynos_eint_to_pin_num' function.

Change-Id: If62dc4e9092ee2723de406ea88432c3e49a929c9
Signed-off-by: Jang JeongHoon <jnghn.jang@samsung.com>

[COMMON] usb: Fixed featuring regarding CPU_IDLE.

Change-Id: I466304be334e2fbbe7421cfaeda5da7499eed1d4
Signed-off-by: Jang JeongHoon <jnghn.jang@samsung.com>

[COMMON] scsi: ufs: Fixed featuring regarding CPU_IDLE.

Change-Id: Ia24ab2960929b103c33e594104e212ce7b9521e4
Signed-off-by: Jang JeongHoon <jnghn.jang@samsung.com>

[9610] arm64: erd9610_defconfig: Enabled CONFIG_CPU_IDLE.

Change-Id: Ib192330d0281995c6388b7147e17b3a63bc9e43c
Signed-off-by: Jang JeongHoon <jnghn.jang@samsung.com>

Revert "[HACK] power: Held temp wakelock."

This reverts commit d4f01c97ceecd2acc607e0890d348490cf403711.

Change-Id: I9df99fb86daff4e234313a550bd32d616d15014e

[9610] arm64: dts: pm-domain: remove dbgdev-pd-vipx1

Change-Id: Ica61c6ad0966fad07e287d5113f00ab71de6a9d0
Signed-off-by: yi jaeuk <ju.yi@samsung.com>

Revert "[HACK][9610] disable runtimePM in VIPX"

This reverts commit 4513eeac6bac70917f95281524a5ccd68418d47a.

Change-Id: I3f5bd17d50acf86fe07d5ef75efe08722cd58640

[9610] fbdev: dpu: DPU bts code code clean

Change-Id: I0c525b1503239dab58000136e43c799410b7e6da
Signed-off-by: hwangjae lee <hj-yo.lee@samsung.com>

[COMMON] soc: samsung: remove un-necessary header file

Change-Id: Ic1e4c236e93b166223565c88764fe9b60b10d02a
Signed-off-by: Taekki Kim <taekki.kim@samsung.com>

[9610] arm64: erd9610_defconfig: Enable CPU_THERMAL config.

Change-Id: I39340c1072d18340f633b4905dc61df0c73e9aa7
Signed-off-by: Chungwoo Park <cww.park@samsung.com>

arm64: erd9610_defconfig: Enable ACME for cpufreq.

Change-Id: I3775c460853ff6365385ac57f594cfd5fd6eb8b6
Signed-off-by: lakkyung.jung <lakkyung.jung@samsung.com>

[9610] arm64: erd9610_defconfig: Enable EMS.

 - fluid RT
 - freqvar-tuner

Change-Id: I0ae2caef74cdaa8fec035427cfcbef1ad6af0b8d
Signed-off-by: lakkyung.jung <lakkyung.jung@samsung.com>

[9610] arm64: erd9610_defconfig: Enable EAS/EHMP & CPUFREQ

Change-Id: Iccdc17b2ef0b66cf07e4ab48b5ffa3ea64d47b5b
Signed-off-by: lakkyung.jung <lakkyung.jung@samsung.com>

[9610] arm64: config: Add devfreq to erd9610 config.

Change-Id: I04d8f9bf520884f441398a2a084150dcce6dec31
Signed-off-by: Chungwoo Park <cww.park@samsung.com>

[9610] arm64: configs: enable EXYNOS_PD

Change-Id: I6fc14f5ee931fc00a8348eaee32d816d06c23cf3
Signed-off-by: yi jaeuk <ju.yi@samsung.com>

[9610] arm64: config: Add dvfs_manager config.

Change-Id: I38cbdb22961ead564d6253b4b61b13bc28819636
Signed-off-by: Chungwoo Park <cww.park@samsung.com>

[9610] arm64: config: Enable thermal driver.

Change-Id: I84ffbed5ba6f180507fc867101828d97fb354d53
Signed-off-by: Chungwoo Park <cww.park@samsung.com>

[9610] arm64: Modify exynos9610 related dm header.

Change-Id: I7f4a7e5c1c7d8001f097b397f1af433d7ba4ee90
Signed-off-by: Chungwoo Park <cww.park@samsung.com>

[9610] arm64: Modify devfreq pm qos related id.

Change-Id: I1a2f23cf35cc1502a9089e8b8df3d41fb8af8874
Signed-off-by: Chungwoo Park <cww.park@samsung.com>

[9610] arm64: dtsi: Add devfreq audio power node to dt.

Change-Id: Ia076a88f015f9b19945f32b865aabff26640f077
Signed-off-by: Chungwoo Park <cww.park@samsung.com>

[COMMON] qos: Add chip config and remove qos.

Change-Id: I50e34b350cb7642c13a12ce6d56769b75ecb15e1
Signed-off-by: Chungwoo Park <cww.park@samsung.com>

[COMMON] devfreq: Update to devfreq core code.

This patch updated devfreq core related code.

Change-Id: I74c069783c8f87779107cddb35b2f984d359627e
Signed-off-by: Chungwoo Park <cww.park@samsung.com>

[9610] soc: samsung: Update dm related config.

Change-Id: Ia111d2df821e45b1936f9ed2dfe092a475713ed5
Signed-off-by: Chungwoo Park <cww.park@samsung.com>

[COMMON] PM: Fixed debugging information for pm_qos in kernel 4.4.

During debugging or profiling, pm_qos list like below is useful information.

device_throughput
default value: 0
target value: 468000
requests:
ffffffc0012896f8: 0
ffffffc06f2f0458: 0

But only pm_qos_request declared for global name space could find what it is.
If pm_qos_request declared in local name space, its address doesn't appeared in
System.map file.

So add more information about pm_qos_request's position like below.

device_throughput
default value: 0
target value: 468000
requests:
ffffffc0012896f8(lpass_probe:1027): 0
ffffffc06f2f0458(fimg2d_pm_qos_add_bus:170): 0

Change-Id: Ib4d18bb7fb44fc6f5c4516382447ed2e60b1efd5
Signed-off-by: Woosung Lee <wstar.lee@samsung.com>

[COMMON] exynos-dm: Add node name to print code.

Change-Id: Iefe12dbb530c18c46ef0ee67e126046c9ca2af07
Signed-off-by: Chungwoo Park <cww.park@samsung.com>

[COMMON] thermal: cpu_cooling: Change debug from ess to dss.

Change-Id: I4e56b1fd9d856117b54ebb061d78a284d367b119
Signed-off-by: Chungwoo Park <cww.park@samsung.com>

[COMMON] cpufreq: acme: Move cooling register to cpufreq_init

cpufreq->exit() callback will be called at disable_nonboot_cpus()
Then, wakeup_source is activated by cooling_unregister.
So, we moved cooling_register at exynos_cpuferq_init() as before.

Change-Id: Ic92c602d7616a99da4e272a5feb656c51b1757da
Signed-off-by: Hyeonseong Gil <hs.gil@samsung.com>

[9610] arm64: dtsi: Modify thermal cooling device setting.

Change-Id: I9eb17a42a4457001f471407486e109853004a8f0
Signed-off-by: Chungwoo Park <cww.park@samsung.com>

[COMMON] thermal : Change debug from ess to dss.

Change-Id: I21762b0b0d85b282830336d6e8085cc144afbbcd
Signed-off-by: Chungwoo Park <cww.park@samsung.com>

[COMMON] exynos-dm: Change debug from ess to dss.

Change-Id: I6098308fdf2f29e8b17db26ca4c63e087aa4ab60
Signed-off-by: Chungwoo Park <cww.park@samsung.com>

[COMMON] cpufreq: acme: Change debug from ess to dss.

Change-Id: I257604fe3dba493a53d94406fec2c8f08beff831
Signed-off-by: lakkyung.jung <lakkyung.jung@samsung.com>

[HACK] fix build error temporary

Change-Id: I02d12e946302cb25d87a1fb0a6b86a79c0e36f70
Signed-off-by: lakkyung.jung <lakkyung.jung@samsung.com>