GitHub/exynos8895/android_kernel_samsung_universal8895.git
13 years agobnx2x: downgrade Max BW error message to debug
Michal Schmidt [Fri, 19 Aug 2011 04:51:01 +0000 (21:51 -0700)]
bnx2x: downgrade Max BW error message to debug

There are valid configurations where Max BW is configured to zero for
some VNs.
Print the message only if debugging is enabled and do not call the
configuration "illegal".

[v2: use DP(), not BNX2X_DBG_ERR(); recommended by Eilon Greenstein.]

Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Acked-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet: fix IBM EMAC driver after rename.
Tony Breeds [Fri, 19 Aug 2011 04:33:49 +0000 (21:33 -0700)]
net: fix IBM EMAC driver after rename.

In commit 9aa3283595451ca093500ff0977b106e1f465586 (ehea/ibm*: Move the
IBM drivers) the IBM_NEW_EMAC* were renames to IBM_EMAC*

The conversion was incomplete so that even if the driver was added to
the .config it wasn't built, but there were no errors).  In this commit
we also update the various defconfigs that use EMAC to use the new
Kconfig symbol, and explicitly add the NET_VENDOR_IBM guard.

We do not explicitly select the Kconfig dependencies, as this would force
EMAC on.  Doing it in the defconfig allows more flexibility.

Tested on a canyondlands board.

Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoNET: Korina: Don't include <asm/segment.h>
Ralf Baechle [Fri, 19 Aug 2011 04:32:18 +0000 (21:32 -0700)]
NET: Korina: Don't include <asm/segment.h>

Korina.c is a MIPS-specific SOC driver and <asm/segment> is empty on
MIPS since 2.1.7 ...

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoMAINTAINERS: qlcnic
Anirban Chakraborty [Fri, 19 Aug 2011 04:31:22 +0000 (21:31 -0700)]
MAINTAINERS: qlcnic

Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoMAINTAINERS: change netxen_nic maintainers
Amit Kumar Salecha [Thu, 18 Aug 2011 11:12:32 +0000 (04:12 -0700)]
MAINTAINERS: change netxen_nic maintainers

I will no longer maintain netxen_nic driver.
Sony Chacko and Rajesh Borundia are taking over.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoflexcan: Add flexcan device support for p1010rdb.
holt@sgi.com [Tue, 16 Aug 2011 17:32:24 +0000 (17:32 +0000)]
flexcan: Add flexcan device support for p1010rdb.

Allow the p1010 processor to select the flexcan network driver.

Signed-off-by: Robin Holt <holt@sgi.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>,
Acked-by: Wolfgang Grandegger <wg@grandegger.com>,
Cc: U Bhaskar-B22300 <B22300@freescale.com>
Cc: socketcan-core@lists.berlios.de,
Cc: netdev@vger.kernel.org,
Cc: PPC list <linuxppc-dev@lists.ozlabs.org>
Cc: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoflexcan: Prefer device tree clock frequency if available.
holt@sgi.com [Tue, 16 Aug 2011 17:32:23 +0000 (17:32 +0000)]
flexcan: Prefer device tree clock frequency if available.

If our CAN device's device tree node has a clock-frequency property,
then use that value for the can devices clock frequency.  If not, fall
back to asking the platform/mach code for the clock frequency associated
with the flexcan device.

Signed-off-by: Robin Holt <holt@sgi.com>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>,
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>,
Cc: U Bhaskar-B22300 <B22300@freescale.com>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: socketcan-core@lists.berlios.de,
Cc: netdev@vger.kernel.org,
Cc: PPC list <linuxppc-dev@lists.ozlabs.org>
Cc: devicetree-discuss@lists.ozlabs.org
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoflexcan: Add of_match to platform_device definition.
holt@sgi.com [Tue, 16 Aug 2011 17:32:22 +0000 (17:32 +0000)]
flexcan: Add of_match to platform_device definition.

On powerpc, the OpenFirmware devices are not matched without specifying
an of_match array.  Introduce that array as that is used for matching
on the Freescale P1010 processor.

Signed-off-by: Robin Holt <holt@sgi.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Cc: U Bhaskar-B22300 <B22300@freescale.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: socketcan-core@lists.berlios.de
Cc: netdev@vger.kernel.org
Cc: PPC list <linuxppc-dev@lists.ozlabs.org>
Cc: devicetree-discuss@lists.ozlabs.org
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoflexcan: Fix up fsl-flexcan device tree binding.
holt@sgi.com [Tue, 16 Aug 2011 17:32:21 +0000 (17:32 +0000)]
flexcan: Fix up fsl-flexcan device tree binding.

This patch cleans up the documentation of the device-tree binding for
the Flexcan devices on Freescale's PowerPC and ARM cores. Extra
properties are not used by the driver so we are removing them.

Signed-off-by: Robin Holt <holt@sgi.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>,
Acked-by: Wolfgang Grandegger <wg@grandegger.com>,
Cc: U Bhaskar-B22300 <B22300@freescale.com>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: socketcan-core@lists.berlios.de,
Cc: netdev@vger.kernel.org,
Cc: PPC list <linuxppc-dev@lists.ozlabs.org>
Cc: devicetree-discuss@lists.ozlabs.org
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoflexcan: Abstract off read/write for big/little endian.
holt@sgi.com [Tue, 16 Aug 2011 17:32:20 +0000 (17:32 +0000)]
flexcan: Abstract off read/write for big/little endian.

Make flexcan driver handle register reads in the appropriate endianess.
This was a basic search and replace and then define some inlines.

Signed-off-by: Robin Holt <holt@sgi.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Cc: U Bhaskar-B22300 <B22300@freescale.com>
Cc: socketcan-core@lists.berlios.de
Cc: netdev@vger.kernel.org
Cc: PPC list <linuxppc-dev@lists.ozlabs.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoflexcan: Remove #include <mach/clock.h>
holt@sgi.com [Tue, 16 Aug 2011 17:32:19 +0000 (17:32 +0000)]
flexcan: Remove #include <mach/clock.h>

powerpc does not have a mach-####/clock.h.  When testing, I found neither
arm nor powerpc needed the mach/clock.h at all so I removed it.

Signed-off-by: Robin Holt <holt@sgi.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Cc: U Bhaskar-B22300 <B22300@freescale.com>
Cc: socketcan-core@lists.berlios.de
Cc: netdev@vger.kernel.org
Cc: PPC list <linuxppc-dev@lists.ozlabs.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet: remove ndo_set_multicast_list callback
Jiri Pirko [Tue, 16 Aug 2011 06:29:02 +0000 (06:29 +0000)]
net: remove ndo_set_multicast_list callback

Remove no longer used operation.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet: remove use of ndo_set_multicast_list in drivers
Jiri Pirko [Tue, 16 Aug 2011 06:29:01 +0000 (06:29 +0000)]
net: remove use of ndo_set_multicast_list in drivers

replace it by ndo_set_rx_mode

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet: introduce IFF_UNICAST_FLT private flag
Jiri Pirko [Tue, 16 Aug 2011 06:29:00 +0000 (06:29 +0000)]
net: introduce IFF_UNICAST_FLT private flag

Use IFF_UNICAST_FTL to find out if driver handles unicast address
filtering. In case it does not, promisc mode is entered.

Patch also fixes following drivers:
stmmac, niu: support uc filtering and yet it propagated
ndo_set_multicast_list
bna, benet, pxa168_eth, ks8851, ks8851_mll, ksz884x : has set
ndo_set_rx_mode but do not support uc filtering

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobonding: use ndo_change_rx_flags callback
Jiri Pirko [Tue, 16 Aug 2011 03:15:04 +0000 (03:15 +0000)]
bonding: use ndo_change_rx_flags callback

Benefit from use of ndo_change_rx_flags in handling change of promisc
and allmulti. No need to store previous state locally.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoMerge branch 'can/mscan' of git://git.pengutronix.de/git/mkl/linux-2.6
David S. Miller [Thu, 18 Aug 2011 03:16:00 +0000 (20:16 -0700)]
Merge branch 'can/mscan' of git://git.pengutronix.de/git/mkl/linux-2.6

13 years agorps: Inspect GRE encapsulated packets to get flow hash
Tom Herbert [Sun, 14 Aug 2011 19:46:29 +0000 (19:46 +0000)]
rps: Inspect GRE encapsulated packets to get flow hash

Crack open GRE packets in __skb_get_rxhash to compute 4-tuple hash on
in encapsulated packet.  Note that this is used only when the
__skb_get_rxhash is taken, in particular only when the device does
not compute provide the rxhash (ie. feature is disabled).

This was tested by creating a single GRE tunnel between two 16 core
AMD machines.  200 netperf TCP_RR streams were ran with 1 byte
request and response size.

Without patch: 157497 tps, 50/90/99% latencies 1250/1292/1364 usecs
With patch: 325896 tps, 50/90/99% latencies 603/848/1169

Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agorps: Infrastructure in __skb_get_rxhash for deep inspection
Tom Herbert [Sun, 14 Aug 2011 19:46:12 +0000 (19:46 +0000)]
rps: Infrastructure in __skb_get_rxhash for deep inspection

Basics for looking for ports in encapsulated packets in tunnels.

Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agorps: Add flag to skb to indicate rxhash is based on L4 tuple
Tom Herbert [Sun, 14 Aug 2011 19:45:55 +0000 (19:45 +0000)]
rps: Add flag to skb to indicate rxhash is based on L4 tuple

The l4_rxhash flag was added to the skb structure to indicate
that the rxhash value was computed over the 4 tuple for the
packet which includes the port information in the encapsulated
transport packet.  This is used by the stack to preserve the
rxhash value in __skb_rx_tunnel.

Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agorps: Some minor cleanup in get_rps_cpus
Tom Herbert [Sun, 14 Aug 2011 19:45:04 +0000 (19:45 +0000)]
rps: Some minor cleanup in get_rps_cpus

Use some variables for clarity and extensibility.

Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobnx2x: Use pr_fmt and message logging cleanups
Joe Perches [Sun, 14 Aug 2011 12:16:21 +0000 (12:16 +0000)]
bnx2x: Use pr_fmt and message logging cleanups

Add pr_fmt(fmt) KBUILD_MODNAME ": " to prefix messages with "bnx2x: ".
Remove #define DP_LEVEL and use pr_notice.
Repeating KERN_<LEVEL> isn't necessary in multi-line printks.
printk macro neatening, use fmt and ##__VA_ARGS__.
Coalesce long formats.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobnx2x: Coalesce pr_cont uses and fix DP typos
Joe Perches [Sun, 14 Aug 2011 12:16:20 +0000 (12:16 +0000)]
bnx2x: Coalesce pr_cont uses and fix DP typos

Uses of pr_cont should be avoided where reasonably possible
because they can be interleaved by other threads and processes.

Coalesce pr_cont uses.

Fix typos, duplicated words and spacing in DP uses caused
by split multi-line formats.  Coalesce some of these
split formats.  Add missing terminating newlines to DP uses.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobnx2x: Remove local defines for %pM and mac address
Joe Perches [Sun, 14 Aug 2011 12:16:19 +0000 (12:16 +0000)]
bnx2x: Remove local defines for %pM and mac address

Use %pM and mac address directly instead.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoethtool: Note common alternate exit condition for interrupt coalescing
Ben Hutchings [Mon, 15 Aug 2011 14:09:22 +0000 (14:09 +0000)]
ethtool: Note common alternate exit condition for interrupt coalescing

Many implementations ignore the value of max_frames and do not
treat usecs == 0 as special.  Document this as deprecated.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoethtool: Explicitly state the exit condition for interrupt coalescing
Ben Hutchings [Mon, 15 Aug 2011 14:08:37 +0000 (14:08 +0000)]
ethtool: Explicitly state the exit condition for interrupt coalescing

Also explicitly state how to disable interrupt coalescing.

Remove the now-redundant text from field descriptions.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoethtool: Correct description of 'max_coalesced_frames' fields
Ben Hutchings [Mon, 15 Aug 2011 14:07:47 +0000 (14:07 +0000)]
ethtool: Correct description of 'max_coalesced_frames' fields

The current descriptions state that these fields specify 'How many
packets to delay ... after a packet ...' which implies that the
hardware should wait for (max_coalesced_frames + 1) completions before
generating an interrupt.  It is also stated that setting both this
field and the corresponding 'coalesce_usecs' field to 0 is invalid.
Together, this implies that the hardware must always be configured
to delay a completion IRQ for at least 1 usec or 1 more completion.

I believe that the addition of 1 is not intended, and David Miller
confirms that the original implementation (in tg3) does not do this.
Clarify the descriptions of these fields to avoid this interpretation.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoethtool: Specify what kind of coalescing struct ethtool_coalesce covers
Ben Hutchings [Mon, 15 Aug 2011 14:07:15 +0000 (14:07 +0000)]
ethtool: Specify what kind of coalescing struct ethtool_coalesce covers

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoethtool: Reformat struct ethtool_coalesce comments into kernel-doc format
Ben Hutchings [Mon, 15 Aug 2011 14:06:20 +0000 (14:06 +0000)]
ethtool: Reformat struct ethtool_coalesce comments into kernel-doc format

This reorders and duplicates some wording, but should make no
substantive changes.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet: Fix sungem_phy sharing.
David S. Miller [Tue, 16 Aug 2011 06:10:39 +0000 (23:10 -0700)]
net: Fix sungem_phy sharing.

Since sungem_phy is used by multiple, unrelated, drivers make it
build as a real module under drivers/net.

depmod will pick up the symbol dependency and make sure sungem_phy.ko
gets loaded any time sungem.ko or spider_net.ko is loaded.

Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agosungem: sungem_phy.h moved
Stephen Rothwell [Tue, 16 Aug 2011 04:02:55 +0000 (21:02 -0700)]
sungem: sungem_phy.h moved

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet/can/mscan: add __iomem annotations
Marc Kleine-Budde [Mon, 15 Aug 2011 10:45:08 +0000 (12:45 +0200)]
net/can/mscan: add __iomem annotations

This patch fixes the following sparse warning by adding the missing
__iomem annotation.

drivers/net/can/mscan/mscan.c:73:32: warning: incorrect type in argument 1 (different address spaces)
drivers/net/can/mscan/mscan.c:73:32:    expected unsigned char volatile [noderef] [usertype] <asn:2>*addr
drivers/net/can/mscan/mscan.c:73:32:    got unsigned char *<noident>

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
13 years agonet: Move sungem_phy.h under include/linux
David S. Miller [Mon, 15 Aug 2011 05:52:04 +0000 (22:52 -0700)]
net: Move sungem_phy.h under include/linux

Fixes build failures of the spider_net driver because it tries
to use a convoluted path to include this header.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoqeth: add support for af_iucv HiperSockets transport
Frank Blaschka [Mon, 8 Aug 2011 01:33:59 +0000 (01:33 +0000)]
qeth: add support for af_iucv HiperSockets transport

This patch extends the HiperSockets device driver to send and receive
af_iucv traffic over HiperSockets transport.
TX: Driver uses new asynchronous delivery of storage blocks to pass
    flow control/congestion information from the HiperSockets microcode
    to the af_iucv socket.
RX: Memory for incoming traffic is preallocated and passed to
    HiperSockets layer. If receiver is not capable to clean its buffers
    shared with HiperSockets and pass new memory to the HiperSockets
    layer this will cause flow control/congestion events on the
    sender.

Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: Einar Lueck <elelueck@de.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoqeth: exploit asynchronous delivery of storage blocks
Einar Lueck [Mon, 8 Aug 2011 01:33:58 +0000 (01:33 +0000)]
qeth: exploit asynchronous delivery of storage blocks

This patch exploits the QDIO support for asynchronous delivery of storage
blocks for Hipersockets. The exploitation is not configured per default and
may be enabled via the function qeth_configure_cq.

Signed-off-by: Einar Lueck <elelueck@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoqeth: support forced signal adapter indications
Einar Lueck [Mon, 8 Aug 2011 01:33:57 +0000 (01:33 +0000)]
qeth: support forced signal adapter indications

This patch ensures that signal adapter commands are issued if they are
indicated to be required.

Signed-off-by: Einar Lueck <elelueck@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoqdio: support forced signal adapter indications
frank.blaschka@de.ibm.com [Mon, 8 Aug 2011 01:33:56 +0000 (01:33 +0000)]
qdio: support forced signal adapter indications

This patch ensures that signal adapter commands are issued if they are
indicated to be required.

Signed-off-by: Einar Lueck <elelueck@de.ibm.com>
Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoqdio: support asynchronous delivery of storage blocks
frank.blaschka@de.ibm.com [Mon, 8 Aug 2011 01:33:55 +0000 (01:33 +0000)]
qdio: support asynchronous delivery of storage blocks

This patch introduces support for asynchronous delivery of storage blocks for
Hipersockets. Upper layers may exploit this functionality to reuse SBALs for
which the delivery status is still pending.

Signed-off-by: Einar Lueck <elelueck@de.ibm.com>
Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoaf_iucv: add HiperSockets transport
Ursula Braun [Mon, 8 Aug 2011 01:33:54 +0000 (01:33 +0000)]
af_iucv: add HiperSockets transport

The current transport mechanism for af_iucv is the z/VM offered
communications facility IUCV. To provide equivalent support when
running Linux in an LPAR, HiperSockets transport is added to the
AF_IUCV address family. It requires explicit binding of an AF_IUCV
socket to a HiperSockets device. A new packet_type ETH_P_AF_IUCV
is announced. An af_iucv specific transport header is defined
preceding the skb data. A small protocol is implemented for
connecting and for flow control/congestion management.

Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoif_ether: add new Ethernet Protocol ID for af_iucv
Frank Blaschka [Mon, 8 Aug 2011 01:33:53 +0000 (01:33 +0000)]
if_ether: add new Ethernet Protocol ID for af_iucv

Add a new ethertype for af_iucv over s/390 HiperSockets transport. Since
HiperSockets is not a real ethernet hw this is not an officially registered ID.

Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoaf_iucv: cleanup - use iucv_sk(sk) early
Ursula Braun [Mon, 8 Aug 2011 01:33:52 +0000 (01:33 +0000)]
af_iucv: cleanup - use iucv_sk(sk) early

Code cleanup making make use of local variable for struct iucv_sock.

Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoaf_iucv: use loadable iucv interface
Frank Blaschka [Mon, 8 Aug 2011 01:33:51 +0000 (01:33 +0000)]
af_iucv: use loadable iucv interface

For future af_iucv extensions the module should be able to run in LPAR
mode too. For this we use the new dynamic loading iucv interface.

Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoiucv: kernel option for z/VM IUCV and HiperSockets
Ursula Braun [Mon, 8 Aug 2011 01:33:50 +0000 (01:33 +0000)]
iucv: kernel option for z/VM IUCV and HiperSockets

When adding HiperSockets transport to AF_IUCV Sockets, af_iucv either
depends on IUCV or QETH_L3 (or both). This patch introduces the
necessary changes for kernel configuration.

Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoiucv: introduce loadable iucv interface
Frank Blaschka [Mon, 8 Aug 2011 01:33:49 +0000 (01:33 +0000)]
iucv: introduce loadable iucv interface

This patch adds a symbol to dynamically load iucv functions.

Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoqeth: do not apply priority queuing to HiperSockets
Ursula Braun [Mon, 8 Aug 2011 01:33:48 +0000 (01:33 +0000)]
qeth: do not apply priority queuing to HiperSockets

OSA cards can be configured to support 1 or 4 output queues. This
does not apply to HiperSockets. This patch limits determination of
the configured number of output queues to OSA cards only, but excludes
HiperSockets.

Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoqeth: l3 ipv6 vlan not working on shared OSA chpid
Frank Blaschka [Mon, 8 Aug 2011 01:33:47 +0000 (01:33 +0000)]
qeth: l3 ipv6 vlan not working on shared OSA chpid

In layer 3 mode IPv6 over VLAN does not work on newer OSA  levels in
case the sender and receiver run on the same (shared) OSA adapter.
Keep vlan info in the skb so the qdio header is filled with the
required vlan tag.

Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agodrivers/net: Kconfig and Makefile cleanup
Jeff Kirsher [Sat, 25 Jun 2011 11:19:17 +0000 (04:19 -0700)]
drivers/net: Kconfig and Makefile cleanup

After the move of the Ethernet drivers into drivers/net/ethernet/
there was some leftover cleanup to do in the Kconfig and Makefile.

Removed the 10/100, 1000, and 10GbE Kconfig menus.

Removed the out-dated pci-skeleton.c file which was used an
example driver.  With the current networking features and
structure, the file is no longer a good example to use for
driver creation.

CC: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
13 years agoacenic: Move the Alteon driver
Jeff Kirsher [Sat, 13 Aug 2011 07:37:14 +0000 (00:37 -0700)]
acenic: Move the Alteon driver

Based on feedback from Alan Cox, the acenic driver moved to
drivers/net/ethernet/alteon/ and made the necessary Kconfig and
Makefile changes.

CC: Jes Sorensen <jes@trained-monkey.org>
CC: Alan Cox <alan@linux.intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
13 years agotile: Move the Tilera driver
Jeff Kirsher [Sun, 31 Jul 2011 01:42:56 +0000 (18:42 -0700)]
tile: Move the Tilera driver

Move the Tilera driver into drivers/net/ethernet/tile and
make the necessary Kconfig and Makefile changes.

Updated the Kconfig so that the options defualt to y if TILE kernel.

CC: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
13 years agoxircom: Move the Xircom driver
Jeff Kirsher [Sat, 30 Jul 2011 10:27:05 +0000 (03:27 -0700)]
xircom: Move the Xircom driver

Move the Xircom driver into drivers/net/ethernet/xircom/ and
make the necessary Kconfig and Makefile changes.

CC: <psheer@icon.co.za>
CC: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
13 years agosh_eth: Move the Renesas SuperH driver
Jeff Kirsher [Sat, 25 Jun 2011 10:53:13 +0000 (03:53 -0700)]
sh_eth: Move the Renesas SuperH driver

Move the Renesas driver into drivers/net/ethernet/renesas/ and make
the necessary Kconfig and Makefile changes.

CC: Yoshihiro Shimoda <yoshihiro.shirmoda.uh@renesas.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
13 years agonetx: Move the netx driver
Jeff Kirsher [Mon, 25 Jul 2011 00:45:14 +0000 (17:45 -0700)]
netx: Move the netx driver

Move the netx driver into drivers/net/ethernet/ and make the
necessary Kconfig and Makefile changes.

CC: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
13 years agodm9000: Move the Davicom driver
Jeff Kirsher [Sat, 25 Jun 2011 10:18:24 +0000 (03:18 -0700)]
dm9000: Move the Davicom driver

Move the Davicom driver into drivers/net/ethernet/davicom/ and
make the necessary Kconfig and Makefile changes.

CC: Ben Dooks <ben@simtec.co.uk>
CC: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
13 years agoenc28j60: Move the Microchip driver
Jeff Kirsher [Sun, 24 Jul 2011 23:12:37 +0000 (16:12 -0700)]
enc28j60: Move the Microchip driver

Move the Microchip driver into drivers/net/ethernet/microchip/ and
make the necessary Kconfig and Makefile changes.

CC: Claudio Lanconelli <lanconelli.claudio@eptar.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
13 years agogreth: Move the Aeroflex Gaisler driver
Jeff Kirsher [Sun, 24 Jul 2011 21:51:26 +0000 (14:51 -0700)]
greth: Move the Aeroflex Gaisler driver

Move the Aeroflex Gaisler driver into drivers/net/ethernet/aeroflex/
and make the necessary Kconfig and Makefile changes.

CC: Kristoffer Glembo <kristoffer@gaisler.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
13 years agoethoc: Move the Avionic driver
Jeff Kirsher [Sun, 24 Jul 2011 21:33:02 +0000 (14:33 -0700)]
ethoc: Move the Avionic driver

Move the Avionic driver into drivers/net/ethernet/ and make the
necessary Kconfig and Makefile changes.

CC: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
13 years agodnet: Move the Dave Ethernet driver
Jeff Kirsher [Sun, 24 Jul 2011 21:01:17 +0000 (14:01 -0700)]
dnet: Move the Dave Ethernet driver

Move the Dave Ethernet driver into drivers/net/ethernet/ and
make the necessary Kconfig and Makefile changes.

CC: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
13 years agohp100: Move the HP driver
Jeff Kirsher [Sun, 24 Jul 2011 20:19:50 +0000 (13:19 -0700)]
hp100: Move the HP driver

Move the HP driver into drivers/net/ethernet/hp/ and
made the necessary Kconfig and Makefile changes.

CC: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
13 years agostarfire: Move the Adaptec driver
Jeff Kirsher [Sun, 24 Jul 2011 09:13:24 +0000 (02:13 -0700)]
starfire: Move the Adaptec driver

Move the Adaptec driver into drivers/net/ethernet/adaptec/ and make
the necessary Kconfig and Makefile changes.

CC: Ion Badulescu <ionut@badula.org>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
13 years agoforcedeth: Move the NVIDIA nForce driver
Jeff Kirsher [Sun, 24 Jul 2011 06:52:55 +0000 (23:52 -0700)]
forcedeth: Move the NVIDIA nForce driver

Move the nForce driver into drivers/net/ethernet/nvidia/ and make
the necessary Kconfig and Makefile changes.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
13 years agofealnx: Move the Myson driver
Jeff Kirsher [Sat, 18 Jun 2011 10:26:31 +0000 (03:26 -0700)]
fealnx: Move the Myson driver

Move the Myson driver into drivers/net/ethernet/ and make the
necessary Kconfig and Makefile changes.

CC: Donald Becker <becker@scyld.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
13 years agor6040: Move the RDC driver
Jeff Kirsher [Sun, 24 Jul 2011 06:26:01 +0000 (23:26 -0700)]
r6040: Move the RDC driver

Move the RDC driver into drivers/net/ethernet/rdc/ and make the
necessary Kconfig and Makefile changes.

CC: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
13 years agomacb: Move the Atmel driver
Jeff Kirsher [Sat, 18 Jun 2011 08:52:36 +0000 (01:52 -0700)]
macb: Move the Atmel driver

Move the Atmel driver into drivers/net/ethernet/cadence/ and
make the necessary Kconfig and Makefile changes.

CC: Nicolas Ferre <nicolas.ferre@atmel.com>
CC: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Jamie Iles <jamie@jamieiles.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
13 years agobfin_mac: Move the Analog Devices Inc driver
Jeff Kirsher [Sat, 18 Jun 2011 07:01:26 +0000 (00:01 -0700)]
bfin_mac: Move the Analog Devices Inc driver

Move the Analog Devices Inc driver into drivers/net/ethernet/adi/ and
make the necessary Kconfig and Makefile changes.

CC: <uclinux-dist-devel@blackfin.uclinux.org>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Bob Liu <bob.liu@analog.com>
13 years agolantiq: Move the Lantiq SoC driver
Jeff Kirsher [Sat, 23 Jul 2011 00:36:06 +0000 (17:36 -0700)]
lantiq: Move the Lantiq SoC driver

Move the Lantiq driver into drivers/net/ethernet/ and the
necessary Kconfig and Makefile changes.

CC: John Crispin <blogic@openwrt.org>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: John Crispin <blogic@openwrt.org>
13 years agomipsnet: Move the MIPS driver
Jeff Kirsher [Tue, 19 Jul 2011 08:15:12 +0000 (01:15 -0700)]
mipsnet: Move the MIPS driver

Move the MIPS drivers into drivers/net/ethernet/ and
make the necessary Kconfig and Makefile changes.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
13 years agokorina: Move the IDT driver
Jeff Kirsher [Sat, 18 Jun 2011 04:45:53 +0000 (21:45 -0700)]
korina: Move the IDT driver

Move the IDT driver into drivers/net/ethernet/ and make the
necessary Kconfig and Makefile changes

CC: "IDT Inc." <rischelp@idt.com>
CC: Felix Fietkau <nbd@openwrt.org>
CC: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
13 years agoipg: Move the IC Plus driver
Jeff Kirsher [Thu, 16 Jun 2011 22:02:54 +0000 (15:02 -0700)]
ipg: Move the IC Plus driver

Move the IC Plus driver into drivers/net/ethernet/icplus/ and
make the necessary Kconfig and Makefile changes.

CC: <craig_rich@sundanceti.com>
CC: <sorbica@icplus.com.tw>
CC: <jesse@icplus.com.tw>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
13 years agoxilinx/ll_temac: Move the Xilinx drivers
Jeff Kirsher [Wed, 15 Jun 2011 18:23:00 +0000 (11:23 -0700)]
xilinx/ll_temac: Move the Xilinx drivers

Move the Xilinx drivers into drivers/net/ethernet/xilinx/ and
make the necessary Kconfig and Makefile changes.

CC: John Williams <john.williams@petalogix.com>
CC: "David H. Lynch Jr." <dhlii@dlasys.net>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
13 years agojme: Move the JME driver
Jeff Kirsher [Wed, 15 Jun 2011 17:17:58 +0000 (10:17 -0700)]
jme: Move the JME driver

Move the JME driver into drivers/net/ethernet/ and make the
necessary Kconfig and Makefile changes.

CC: Guo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
13 years agoocteon: Move the Cavium driver
Jeff Kirsher [Wed, 15 Jun 2011 16:51:27 +0000 (09:51 -0700)]
octeon: Move the Cavium driver

Move the Cavium driver to drivers/net/ethernet/octeon/ and
make the necessary Kconfig and Makefile changes.

CC: David Daney <david.daney@cavium.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: David Daney <david.daney@cavium.com>
13 years agohamachi/yellowfin: Move the packet engine drivers
Jeff Kirsher [Tue, 14 Jun 2011 21:02:57 +0000 (14:02 -0700)]
hamachi/yellowfin: Move the packet engine drivers

Move the packet engine drivers to drivers/net/ethernet/packetengines/
and the necessary Kconfig and Makefile changes.

CC: Donald Becker <becker@scyld.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
13 years agodavinci*/tlan/cpmac: Move the Texas Instruments (TI) drivers
Jeff Kirsher [Tue, 14 Jun 2011 19:56:50 +0000 (12:56 -0700)]
davinci*/tlan/cpmac: Move the Texas Instruments (TI) drivers

Move the Texas Instruments drivers to drivers/net/ethernet/ti/ and
make the necessary Kconfig and Makefile changes.

CC: Sriram <srk@ti.com>
CC: Vinay Hegde <vinay.hegde@ti.com>
CC: Cyril Chemparathy <cyril@ti.com>
CC: Samuel Chessman <chessman@tux.org>
CC: <torben.mathiasen@compaq.com>
CC: Eugene Konev <ejka@imfi.kspu.ru>
CC: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
13 years agos6gmac: Move the s6gmac drivers
Jeff Kirsher [Mon, 13 Jun 2011 17:51:34 +0000 (10:51 -0700)]
s6gmac: Move the s6gmac drivers

Move the s6gmac driver to drivers/net/ethernet/ and
make the necessary Kconfig and Makefile changes.

CC: Oskar Schirmer <os@emlix.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
13 years agotsi108*: Move the Tundra driver
Jeff Kirsher [Sat, 30 Jul 2011 08:15:34 +0000 (01:15 -0700)]
tsi108*: Move the Tundra driver

Move the Tundra driver to drivers/net/ethernet/tundra/ and
make the necessary Kocnfig and Makefile changes.

CC: Kong Lai <kong.lai@tundra.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
13 years agonuvoton: Move the Nuvoton driver
Jeff Kirsher [Sun, 17 Jul 2011 07:20:45 +0000 (00:20 -0700)]
nuvoton: Move the Nuvoton driver

Move the Nuvoton driver into drivers/net/ethernet/nuvoton/ and
make the necessary Kconfig and Makefile changes.

CC: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
13 years agocirrus: Move the Cirrus network driver
Jeff Kirsher [Sun, 17 Jul 2011 06:50:52 +0000 (23:50 -0700)]
cirrus: Move the Cirrus network driver

Move the Cirrus Ethernet driver into drivers/net/ethernet/cirrus/
and make the necessary Kconfig and Makefile changes

CC: Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
13 years agosis*: Move the Silicon Integrated Systems (SiS) drivers
Jeff Kirsher [Mon, 13 Jun 2011 15:43:49 +0000 (08:43 -0700)]
sis*: Move the Silicon Integrated Systems (SiS) drivers

Move the SiS drivers into drivers/net/ethernet/sis/ and make the
necessary Kconfig and Makefile changes

CC: Daniele Venzano <venza@brownhat.org>
CC: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
13 years agocnic: Fix select dependencies in bnx2fc/bnx2i Kconfig.
David S. Miller [Fri, 12 Aug 2011 10:00:47 +0000 (03:00 -0700)]
cnic: Fix select dependencies in bnx2fc/bnx2i Kconfig.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet: cleanup some rcu_dereference_raw
Eric Dumazet [Thu, 11 Aug 2011 19:30:52 +0000 (19:30 +0000)]
net: cleanup some rcu_dereference_raw

RCU api had been completed and rcu_access_pointer() or
rcu_dereference_protected() are better than generic
rcu_dereference_raw()

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoneigh: reduce arp latency
Eric Dumazet [Tue, 9 Aug 2011 08:15:58 +0000 (08:15 +0000)]
neigh: reduce arp latency

Remove the artificial HZ latency on arp resolution.

Instead of firing a timer in one jiffy (up to 10 ms if HZ=100), lets
send the ARP message immediately.

Before patch :

# arp -d 192.168.20.108 ; ping -c 3 192.168.20.108
PING 192.168.20.108 (192.168.20.108) 56(84) bytes of data.
64 bytes from 192.168.20.108: icmp_seq=1 ttl=64 time=9.91 ms
64 bytes from 192.168.20.108: icmp_seq=2 ttl=64 time=0.065 ms
64 bytes from 192.168.20.108: icmp_seq=3 ttl=64 time=0.061 ms

After patch :

$ arp -d 192.168.20.108 ; ping -c 3 192.168.20.108
PING 192.168.20.108 (192.168.20.108) 56(84) bytes of data.
64 bytes from 192.168.20.108: icmp_seq=1 ttl=64 time=0.152 ms
64 bytes from 192.168.20.108: icmp_seq=2 ttl=64 time=0.064 ms
64 bytes from 192.168.20.108: icmp_seq=3 ttl=64 time=0.074 ms

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobenet: fix build error on 32bit arch
Eric Dumazet [Tue, 9 Aug 2011 06:23:07 +0000 (06:23 +0000)]
benet: fix build error on 32bit arch

Error comes from commit ac124ff973e27802797
(be2net: cleanup and refactor stats code)

ERROR: "__udivdi3" [drivers/net/benet/be2net.ko] undefined!

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agotoshiba: Move the Toshiba drivers
Jeff Kirsher [Sat, 30 Jul 2011 07:36:02 +0000 (00:36 -0700)]
toshiba: Move the Toshiba drivers

Move the Toshiba ethernet drivers into drivers/net/ethernet/toshiba
and make the necessary Kconfig and Makefile changes.

CC: Geoff Levand <geoff@infradead.org>
CC: Jens Osterkamp <Jens.Osterkamp@de.ibm.com>
CC: Ishizaki Kou <kou.ishizaki@toshiba.co.jp>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
13 years agoks8*/ksz8*: Move the Micrel drivers
Jeff Kirsher [Sat, 11 Jun 2011 10:26:31 +0000 (03:26 -0700)]
ks8*/ksz8*: Move the Micrel drivers

Move the Micrel drivers into drivers/net/ethernet/micrel/ and
make the necessary Kconfig and Makefile changes.

CC: Ben Dooks <ben@simtec.co.uk>
CC: Tristram Ha <Tristram.Ha@micrel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
13 years agofreescale: Move the Freescale drivers
Jeff Kirsher [Sat, 11 Jun 2011 09:29:36 +0000 (02:29 -0700)]
freescale: Move the Freescale drivers

Move the Freescale drivers into drivers/net/ethernet/freescale/ and
make the necessary Kconfig and Makefile changes.

CC: Sandeep Gopalpet <sandeep.kumar@freescale.com>
CC: Andy Fleming <afleming@freescale.com>
CC: Shlomi Gridish <gridish@freescale.com>
CC: Li Yang <leoli@freescale.com>
CC: Pantelis Antoniou <pantelis.antoniou@gmail.com>
CC: Vitaly Bordug <vbordug@ru.mvista.com>
CC: Dan Malek <dmalek@jlc.net>
CC: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
13 years agoeth16i: Move the Allied Telesis/Fujitsu drivers
Jeff Kirsher [Sat, 11 Jun 2011 08:13:22 +0000 (01:13 -0700)]
eth16i: Move the Allied Telesis/Fujitsu drivers

Move the Allied Telesis/Fujitsu drivers into drivers/net/ethernet/fujitsu/
and make the necessary Kconfig and Makefile changes.

CC: Shingo Fujimoto <shingo@flab.fujitsu.co.jp>
CC: Yutaka Tamiya <tamy@flab.fujitsu.co.jp>
CC: Rene Schmit <rene@bss.lu>
CC: Mika Kuoppala <miku@iki.fi>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
13 years agovia-*: Move the VIA drivers
Jeff Kirsher [Sat, 21 May 2011 03:43:09 +0000 (20:43 -0700)]
via-*: Move the VIA drivers

Move the VIA drivers into drivers/net/ethernet/via/ and make the
necessary Kconfig and Makefile changes.

CC: Roger Luethi <rl@hellgate.ch>
CC: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
13 years agoskge/sky2/mv643xx/pxa168: Move the Marvell Ethernet drivers
Jeff Kirsher [Sat, 21 May 2011 03:18:55 +0000 (20:18 -0700)]
skge/sky2/mv643xx/pxa168: Move the Marvell Ethernet drivers

Move the Marvell Ethernet drivers into drivers/net/ethernet/marvell/
and make the necessary Kconfig and Makefile changes.

CC: Sachin Sanap <ssanap@marvell.com>
CC: Zhangfei Gao <zgao6@marvell.com>
CC: Philip Rakity <prakity@marvell.com>
CC: Mark Brown <markb@marvell.com>
CC: Lennert Buytenhek <buytenh@marvell.com>
CC: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
13 years agopch_gbe: Move the OKI Semiconductor driver
Jeff Kirsher [Sat, 21 May 2011 02:48:55 +0000 (19:48 -0700)]
pch_gbe: Move the OKI Semiconductor driver

Move the OKI Semiconductor driver into driver/net/ethernet/oki-semi/
and make the necessary Kconfig and Makefile changes.

Note: there is no documented maintainer for this driver, so I CC'd
the last 2 major contributors.

CC: Tomoya <tomoya-linux@dsn.okisemi.com>
CC: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
13 years agoseeq: Move the SEEQ drivers
Jeff Kirsher [Fri, 15 Jul 2011 10:18:21 +0000 (03:18 -0700)]
seeq: Move the SEEQ drivers

Move the drivers that use SEEQ chipset into drivers/net/ethernet/seeq
and make the necessary Kconfig and Makefile changes.

CC: Russell King <linux@arm.linux.org.uk>
CC: Hamish Coleman <hamish@zot.apana.org.au>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
13 years agoioc3-eth/meth: Move the SGI drivers
Jeff Kirsher [Fri, 20 May 2011 14:50:27 +0000 (07:50 -0700)]
ioc3-eth/meth: Move the SGI drivers

Move the SGI drivers into drivers/net/ethernet/sgi/ and make the
necessary Kconfig and Makefile changes.

CC: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
13 years agoewrk3/tulip: Move the DEC - Tulip drivers
Jeff Kirsher [Fri, 20 May 2011 14:15:19 +0000 (07:15 -0700)]
ewrk3/tulip: Move the DEC - Tulip drivers

Move the DEC - Tulip driver into drivers/net/ethernet/dec/tulip/
and make the necessary Kconfig and Makefile changes.

The Digital Equioment (DEC) driver ewrk3 was moved into
drivers/net/ethernet/dec/ and the remaining drivers (Tulip)
were moved into drivers/net/ethernet/dec/tulip/

CC: Tobias Ringstrom <tori@unhappy.mine.nu>
CC: Grant Grundler <grundler@parisc-linux.org>
CC: David Davies <davies@maniac.ultranet.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Grant Grundler <grundler@parisc-linux.org>
13 years agospider_net: fix compile issue introduced by driver move
Jeff Kirsher [Fri, 12 Aug 2011 06:06:28 +0000 (23:06 -0700)]
spider_net: fix compile issue introduced by driver move

Both Spider net driver and Sun GEM driver use the sungem_phy.o object.
This fix creates a Kconfig object for sungem_phy (like MDIO) so that
both drivers require the SUNGEM_PHY object.

This has been compile tested for the Sun GEM driver.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agomlx4: Fix infiniband Kconfig dependencies.
David S. Miller [Fri, 12 Aug 2011 06:05:05 +0000 (23:05 -0700)]
mlx4: Fix infiniband Kconfig dependencies.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agocxgbi: Fix scsi Kconfig dependencies.
David S. Miller [Fri, 12 Aug 2011 05:59:31 +0000 (22:59 -0700)]
cxgbi: Fix scsi Kconfig dependencies.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoatl*: Move the Atheros drivers
Jeff Kirsher [Fri, 20 May 2011 13:55:16 +0000 (06:55 -0700)]
atl*: Move the Atheros drivers

Move the Atheros drivers into drivers/net/ethernet/atheros/ and
make the necessary Kconfig and Makefile changes.

CC: Jay Cliburn <jcliburn@gmail.com>
CC: Chris Snook <chris.snook@gmail.com>
CC: Jie Yang <jie.yang@atheros.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
13 years agode6*/dl2k/sundance: Move the D-Link drivers
Jeff Kirsher [Fri, 20 May 2011 07:04:35 +0000 (00:04 -0700)]
de6*/dl2k/sundance: Move the D-Link drivers

Move the D-Link drivers into drivers/net/ethernet/dlink/ and
make the necessary Kconfig and Makefile changes.

CC: Bjorn Ekwall <bj0rn@blox.se>
CC: Donald Becker <becker@scyld.com>
CC: Edward Peng <edward_peng@dlink.com.tw>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
13 years ago8139*/atp/r8169/sc92031: Move the Realtek drivers
Jeff Kirsher [Fri, 20 May 2011 06:27:55 +0000 (23:27 -0700)]
8139*/atp/r8169/sc92031: Move the Realtek drivers

Move the Realtek drivers into drivers/net/ethernet/realtek/ and make
the necessary Kconfig and Makefile changes.

CC: Realtek linux nic maintainers <nic_swsd@realtek.com>
CC: Francois Romieu <romieu@fr.zoreil.com>
CC: Jeff Garzik <jgarzik@pobox.com>
CC: Donald Becker <becker@scyld.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
13 years agoftgmac100/ftmac100: Move the Faraday drivers
Jeff Kirsher [Wed, 22 Jun 2011 00:55:27 +0000 (17:55 -0700)]
ftgmac100/ftmac100: Move the Faraday drivers

Move the Faraday driver into drivers/net/ethernet/faraday/ and
make the necessary Kconfig and Makefile changes.

CC: "Po-Yu Chuang" <ratbert@faraday-tech.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Po-Yu Chuang <ratbert@faraday-tech.com>
13 years agoxscale: Move the Intel XScale IXP drivers
Jeff Kirsher [Fri, 15 Jul 2011 05:13:23 +0000 (22:13 -0700)]
xscale: Move the Intel XScale IXP drivers

Move the Intel XScale IXP drivers into drivers/net/ethernet/xscale/
and make the necessary Kconfig and Makefile changes.

CC: Krzysztof Halasa <khc@pm.waw.pl>
CC: Lennert Buytenhek <kernel@wantstofly.org>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
13 years ago*sonic/natsemi/ns83829: Move the National Semi-conductor drivers
Jeff Kirsher [Wed, 18 May 2011 12:14:22 +0000 (05:14 -0700)]
*sonic/natsemi/ns83829: Move the National Semi-conductor drivers

Move the National Semi-conductor drivers into drivers/net/ethernet/natsemi/
and make the necessary Kconfig and Makefile changes.  Also moved the 8390
(National Semi-conductor) devices as a sub-menu of National Semi-conductor
devices.

- moved the ibmlana driver as well into this directory since it is a
  "SONIC" driver

CC: Alfred Arnold <alfred.arnold@lancom.de>
CC: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
CC: Harald Welte <laforge@gnumonks.org>
CC: Tim Hockin <thockin@hockin.org>
CC: <linux-ns83820@kvack.org>
CC: Kevin Chea <kchea@yahoo.com>
CC: Marc Gauthier <marc@linux-xtensa.org>
CC: Chris Zankel <chris@zankel.net>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Marc Gauthier <marc@tensilica.com>