GitHub/exynos8895/android_kernel_samsung_universal8895.git
10 years agoperf ui browsers: Add missing include
Arnaldo Carvalho de Melo [Fri, 10 Oct 2014 18:39:02 +0000 (15:39 -0300)]
perf ui browsers: Add missing include

This file needs the K_{RIGHT,etc} definitions but isn't including the
file where they are defined, ui/keysyms.h, fix it.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-jlpybqegpdauzx64l9r1jgm3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf tools: Move events_stats struct to event.h
Arnaldo Carvalho de Melo [Fri, 10 Oct 2014 18:46:05 +0000 (15:46 -0300)]
perf tools: Move events_stats struct to event.h

This is the only bit of hist.h that session.[ch] will end up using, so
move it out of hist.h to make that abundantly clear.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-l9ftsl21ggw0c1g2ig87otmd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf session: Don't count per evsel events
Arnaldo Carvalho de Melo [Fri, 10 Oct 2014 18:12:15 +0000 (15:12 -0300)]
perf session: Don't count per evsel events

PERF_RECORD_SAMPLE was not being counted here and is the only per-evsel
thing anyway, the other events were not mapping to a evsel.

With this we don't require that evsels used with a perf_session need to
have space for hists, like the ones in annotate, report, top.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-kzchpz0l1mhrsfpkirz086m2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf evsel: Add hists helper
Arnaldo Carvalho de Melo [Thu, 9 Oct 2014 16:13:41 +0000 (13:13 -0300)]
perf evsel: Add hists helper

Not all tools need a hists instance per perf_evsel, so lets pave the way
to remove evsel->hists while leaving a way to access the hists from a
specially allocated evsel, one that comes with space at the end where
lives the evsel.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-qlktkhe31w4mgtbd84035sr2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf script: Stop updating hists stats, not used
Arnaldo Carvalho de Melo [Thu, 9 Oct 2014 14:45:42 +0000 (11:45 -0300)]
perf script: Stop updating hists stats, not used

Not used here, remove to reduce perf_evsel/hists structs interaction.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-zzmoo39yalrl9hzu9nc2xqml@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf sched: Stop updating hists stats, not used
Arnaldo Carvalho de Melo [Thu, 9 Oct 2014 14:40:15 +0000 (11:40 -0300)]
perf sched: Stop updating hists stats, not used

Not used here, remove to reduce perf_evsel/hists structs interaction.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-cb7wkk4a3jpoovzim914ih3c@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf callchain: Move callchain_param to util object in to fix python test
Jiri Olsa [Wed, 1 Oct 2014 16:00:26 +0000 (18:00 +0200)]
perf callchain: Move callchain_param to util object in to fix python test

In following commit we changed the location of callchains data:

  72a128aa083a7f4cc4f800718aaae05d9c698e26
  perf tools: Move callchain config from record_opts to callchain_param

Now all callchains stuff stays in callchain_param struct, which adds its
dependency for evsel.c object and breaks python perf.so usage
(unresolved callchain_param).

Moving callchain_param into callchain.c and adding it into
python-ext-sources unleash just another dependency hell, so I ended up
adding callchain_param into util.c for now.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Milian Wolff <mail@milianw.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1412179229-19466-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf kvm stat live: Use fdarray object instead of pollfd
Jiri Olsa [Wed, 1 Oct 2014 16:00:29 +0000 (18:00 +0200)]
perf kvm stat live: Use fdarray object instead of pollfd

The reason is that we don't need to count the number of file descriptors
because it's already handled in fdarray object.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Milian Wolff <mail@milianw.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1412179229-19466-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf kvm stat live: Use perf_evlist__add_pollfd return fd position
Jiri Olsa [Wed, 1 Oct 2014 16:00:28 +0000 (18:00 +0200)]
perf kvm stat live: Use perf_evlist__add_pollfd return fd position

With the interface changed in following commit:

  2171a9256862 tools lib fd array: Allow associating an integer cookie with each entry

the perf_evlist__add_pollfd function now returns the fd position in the
pollfd array.

Hence we no longer need to count the fd position, because we get it as
the return value.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Milian Wolff <mail@milianw.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1412179229-19466-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf kvm stat live: Fix perf_evlist__add_pollfd error handling
Jiri Olsa [Wed, 1 Oct 2014 16:00:27 +0000 (18:00 +0200)]
perf kvm stat live: Fix perf_evlist__add_pollfd error handling

With the interface changed in following commit:

  2171a9256862 tools lib fd array: Allow associating an integer cookie with each entry

the perf_evlist__add_pollfd function now returns the fd position in the
pollfd array.

We need to change this function's error check condition.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Milian Wolff <mail@milianw.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1412179229-19466-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf/x86: Tone down kernel messages when the PMU check fails in a virtual environment
Wei Huang [Thu, 25 Sep 2014 03:55:14 +0000 (22:55 -0500)]
perf/x86: Tone down kernel messages when the PMU check fails in a virtual environment

PMU checking can fail due to various reasons. On native machine, this
is mostly caused by faulty hardware and it is reasonable to use
KERN_ERR in reporting. However, when kernel is running on virtualized
environment, this checking can fail if virtual PMU is not supported
(e.g. KVM on AMD host). It is annoying to see an error message on
splash screen, even though we know such failure is benign on
virtualized environment.

This patch checks if the kernel is running in a virtualized environment.
If so, it will use KERN_INFO in reporting, which reduces the syslog
priority of them. This patch was tested successfully on KVM.

Signed-off-by: Wei Huang <wei@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Link: http://lkml.kernel.org/r/1411617314-24659-1-git-send-email-wei@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
10 years agoperf/x86/intel/uncore: Fix minor race in box set up
Andi Kleen [Mon, 22 Sep 2014 22:27:06 +0000 (15:27 -0700)]
perf/x86/intel/uncore: Fix minor race in box set up

I was looking for the trinity oops cause in the uncore driver.
(so far didn't found it)

However I found this tiny race: when a box is set up two threads on the
same CPU, they may be setting up the box in parallel (e.g. with kernel
preemption). This could lead to the reference count being increasing
too much. Always recheck there is no existing cpu reference inside the lock.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: eranian@google.com
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Link: http://lkml.kernel.org/r/1411424826-15629-1-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
10 years agoMerge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git...
Ingo Molnar [Fri, 3 Oct 2014 03:29:14 +0000 (05:29 +0200)]
Merge tag 'perf-core-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

User visible changes:

  * Fix mmap return address truncation to 32-bit in 'perf trace'. (Chang Hyun Park)

  * Support operations for shared futexes. (Davidlohr Bueso)

  * Fix error message for --filter option not coming after tracepoint. (Arnaldo Carvalho de Melo)

Infrastructure changes:

  * Refactor unit and scale function parameters for PMU parsing routines. (Matt Fleming)

  * Improve DSO long names lookup with rbtree, resulting in great speedup for
    workloads with lots of DSOs. (Waiman Long)

  * Fix build breakage on arm64 targets. (Will Deacon)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
10 years agoperf record: Fix error message for --filter option not coming after tracepoint
Arnaldo Carvalho de Melo [Wed, 1 Oct 2014 18:05:32 +0000 (15:05 -0300)]
perf record: Fix error message for --filter option not coming after tracepoint

  [root@zoo ~]# perf record --filter "common_pid != PERF_PID" -a
  -F option should follow a -e tracepoint option.

The -F option is for --freq, not --filter. Fix it up to show:

  [root@zoo ~]# perf record --filter "common_pid != PERF_PID" -a
  --filter option should follow a -e tracepoint option

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-z0yrm8stn9w3423nkov3eksg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf tools: Fix build breakage on arm64 targets
Will Deacon [Tue, 30 Sep 2014 11:27:12 +0000 (12:27 +0100)]
perf tools: Fix build breakage on arm64 targets

Attempting to build the perf tool for an arm64 target results in the
following failure:

  arch/arm64/util/unwind-libunwind.c: In function 'libunwind__arch_reg_id':
  arch/arm64/util/unwind-libunwind.c:77:3: error: implicit declaration of function 'pr_err'
     pr_err("unwind: invalid reg id %d\n", regnum);
     ^
  arch/arm64/util/unwind-libunwind.c:77:3: error: nested extern declaration of 'pr_err'

This is due to commit 84f5d36f4866 ("perf tools: Move pr_* debug macros
into debug object") moving the pr_* macros into a new header file, but
failing to update architectures other than x86.

This patch adds the missing include, and fixes the build again.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1412076432-22045-1-git-send-email-will.deacon@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf symbols: Improve DSO long names lookup speed with rbtree
Waiman Long [Tue, 30 Sep 2014 17:36:15 +0000 (13:36 -0400)]
perf symbols: Improve DSO long names lookup speed with rbtree

With workload that spawns and destroys many threads and processes, it
was found that perf-mem could took a long time to post-process the perf
data after the target workload had completed its operation.

The performance bottleneck was found to be the lookup and insertion of
the new DSO structures (thousands of them in this case).

In a dual-socket Ivy-Bridge E7-4890 v2 machine (30-core, 60-thread), the
perf profile below shows what perf was doing after the profiled AIM7
shared workload completed:

-     83.94%  perf  libc-2.11.3.so     [.] __strcmp_sse42
   - __strcmp_sse42
      - 99.82% map__new
           machine__process_mmap_event
           perf_session_deliver_event
           perf_session__process_event
           __perf_session__process_events
           cmd_record
           cmd_mem
           run_builtin
           main
           __libc_start_main
-     13.17%  perf  perf               [.] __dsos__findnew
     __dsos__findnew
     map__new
     machine__process_mmap_event
     perf_session_deliver_event
     perf_session__process_event
     __perf_session__process_events
     cmd_record
     cmd_mem
     run_builtin
     main
     __libc_start_main

So about 97% of CPU times were spent in the map__new() function trying
to insert new DSO entry into the DSO linked list. The whole
post-processing step took about 9 minutes.

The DSO structures are currently searched linearly. So the total
processing time will be proportional to n^2.

To overcome this performance problem, the DSO code is modified to also
put the DSO structures in a RB tree sorted by its long name in
additional to being in a simple linked list. With this change, the
processing time will become proportional to n*log(n) which will be much
quicker for large n. However, the short name will still be searched
using the old linear searching method.  With that patch in place, the
same perf-mem post-processing step took less than 30 seconds to
complete.

Signed-off-by: Waiman Long <Waiman.Long@hp.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Douglas Hatch <doug.hatch@hp.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott J Norton <scott.norton@hp.com>
Link: http://lkml.kernel.org/r/1412098575-27863-3-git-send-email-Waiman.Long@hp.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf symbols: Encapsulate dsos list head into struct dsos
Waiman Long [Mon, 29 Sep 2014 20:07:28 +0000 (16:07 -0400)]
perf symbols: Encapsulate dsos list head into struct dsos

This is a precursor patch to enable long name searching of DSOs using
a rbtree.

In this patch, a new dsos structure is created which contains only a
list head structure for the moment.

The new dsos structure is used, in turn, in the machine structure for
the user_dsos and kernel_dsos fields.

Only the following 3 dsos functions are modified to accept the new dsos
structure parameter instead of list_head:

 - dsos__add()
 - dsos__find()
 - __dsos__findnew()

Signed-off-by: Waiman Long <Waiman.Long@hp.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Douglas Hatch <doug.hatch@hp.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott J Norton <scott.norton@hp.com>
Link: http://lkml.kernel.org/r/1412021249-19201-2-git-send-email-Waiman.Long@hp.com
[ Move struct dsos to dso.h to reduce the dso methods depends on machine.h ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf bench futex: Sanitize -q option in requeue
Davidlohr Bueso [Mon, 29 Sep 2014 16:41:08 +0000 (09:41 -0700)]
perf bench futex: Sanitize -q option in requeue

When given the number of threads to requeue at once by user input,
there's always the risk of this value being larger than the total number
of threads.  This doesn't make any sense, and the kernel can easily deal
with such sort of situations, hence no big deal. We should however
prevent bogus output such as:

./perf bench --repeat 2 futex requeue -q 10
Run summary [PID 22210]: Requeuing 4 threads (from [private] 0x99ef3c to 0x99ef38), 10 at a time.

[Run 1]: Requeued 10 of 4 threads in 0.0040 ms
[Run 2]: Requeued 10 of 4 threads in 0.0030 ms
Requeued 10 of 4 threads in 0.0035 ms (+-14.29%)

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Davidlohr Bueso <dbueso@suse.de>
Link: http://lkml.kernel.org/r/1412008868-22328-2-git-send-email-dave@stgolabs.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf bench futex: Support operations for shared futexes
Davidlohr Bueso [Mon, 29 Sep 2014 16:41:07 +0000 (09:41 -0700)]
perf bench futex: Support operations for shared futexes

Unlike futex-hash, requeuing and wakeup benchmarks do not support shared
futexes, limiting the usefulness of the programs. Correct this, and
allow using the local -S parameter. The default remains using private
futexes.

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Davidlohr Bueso <dbueso@suse.de>
Link: http://lkml.kernel.org/r/1412008868-22328-1-git-send-email-dave@stgolabs.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf trace: Fix mmap return address truncation to 32-bit
Chang Hyun Park [Fri, 26 Sep 2014 12:54:01 +0000 (21:54 +0900)]
perf trace: Fix mmap return address truncation to 32-bit

Using 'perf trace' for mmap is truncating return values by stripping the
top 32 bits, actually printing only the lower 32 bits.

This was because the ret value was of an 'int' type and not a 'long'
type.

  The Problem:

  991258501.244 ( 0.004 ms): mmap(len: 40001536, prot: READ|WRITE, flags: PRIVATE|ANONYMOUS, fd: -1) = 0x56691000
  991258501.257 ( 0.000 ms): minfault [_int_malloc+0x1038] => //anon@0x7fa056691008 //(d.)

The first line shows an mmap, which succeeds and returns 0x56691000.

However the next line shows a memory access to that virtual memory area,
specifically to 0x7fa056691008. The upper 32 bit is lost due to the
problem mentioned above, and thus mmap's return value didn't have the
upper 0x7fa0.

Tested on 3.17-rc5 from the linus's tree, and the HEAD of tip/master

Signed-off-by: Chang Hyun Park <heartinpiece@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1411736041-8017-1-git-send-email-heartinpiece@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf tools: Refactor unit and scale function parameters
Matt Fleming [Wed, 24 Sep 2014 14:04:06 +0000 (15:04 +0100)]
perf tools: Refactor unit and scale function parameters

Passing pointers to alias modifiers 'unit' and 'scale' isn't very
future-proof since if we add more modifiers to the list we'll end up
passing more arguments.

Instead wrap everything up in a struct perf_pmu_info, which can easily
be expanded when additional alias modifiers are necessary in the future.

Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1411567455-31264-3-git-send-email-matt@console-pimps.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoMerge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git...
Ingo Molnar [Sat, 27 Sep 2014 07:15:48 +0000 (09:15 +0200)]
Merge tag 'perf-core-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

User visible changes:

  o Restore "--callchain graph" output, broken in recent cset to end
    up being the same as "fractal" (Namhyung Kim)

  o Allow profiling when kptr_restrict == 1 for non root users,
    kernel samples will just remain unresolved (Andi Kleen)

  o Allow configuring default options for callchains in config file (Namhyung Kim)

  o Fix line number in the config file error message (Jiri Olsa)

  o Fix --per-core on multi socket systems (Andi Kleen)

Cleanups:

  o Use ACCESS_ONCE() instead of volatile cast. (Pranith Kumar)

  o Modify error code for when perf_session__new() fails (Taeung Song)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
10 years agoperf tools: Fix line number in the config file error message
Jiri Olsa [Tue, 23 Sep 2014 11:56:56 +0000 (13:56 +0200)]
perf tools: Fix line number in the config file error message

If we fail to parse the config file within the callback function,
the line number counter 'could be' already on the next line.

This results in wrong line number report like:

  $ cat ~/.perfconfig
  [call-graph]
          sort-key = krava
  $ perf record ls
  Fatal: bad config file line 3 in /home/jolsa/.perfconfig

Fixing this by saving the current line number for this case.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Milian Wolff <mail@milianw.de>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20140923115656.GC2979@krava.brq.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf tools: Convert {record,top}.call-graph option to call-graph.record-mode
Namhyung Kim [Tue, 23 Sep 2014 01:01:44 +0000 (10:01 +0900)]
perf tools: Convert {record,top}.call-graph option to call-graph.record-mode

So that it'll be passed to perf_callchain_config().

Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Milian Wolff <mail@milianw.de>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1411434104-5307-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf tools: Introduce perf_callchain_config()
Namhyung Kim [Tue, 23 Sep 2014 01:01:43 +0000 (10:01 +0900)]
perf tools: Introduce perf_callchain_config()

This patch adds support for following config options to ~/.perfconfig file.

  [call-graph]
    record-mode = dwarf
    dump-size = 8192
    print-type = fractal
    order = callee
    threshold = 0.5
    print-limit = 128
    sort-key = function

Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Milian Wolff <mail@milianw.de>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1411434104-5307-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf callchain: Move some parser functions to callchain.c
Namhyung Kim [Tue, 23 Sep 2014 01:01:42 +0000 (10:01 +0900)]
perf callchain: Move some parser functions to callchain.c

And rename record_callchain_parse() to parse_callchain_record_opt() in
accordance to parse_callchain_report_opt().

Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Milian Wolff <mail@milianw.de>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1411434104-5307-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf tools: Move callchain config from record_opts to callchain_param
Namhyung Kim [Tue, 23 Sep 2014 01:01:41 +0000 (10:01 +0900)]
perf tools: Move callchain config from record_opts to callchain_param

So that all callchain config parameters can be read/written to a single
place.  It's a preparation to consolidate handling of all callchain
options.

Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Milian Wolff <mail@milianw.de>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1411434104-5307-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf hists browser: Fix callchain print bug on TUI
Namhyung Kim [Tue, 23 Sep 2014 01:01:40 +0000 (10:01 +0900)]
perf hists browser: Fix callchain print bug on TUI

Currently perf report -g graph option doesn't work as expected and
always work as same as -g fractal.  This was a bug during recent
callchain print code cleanup.

Before:
  $ perf report -g graph

    Children      Self  Command  Shared Object      Symbol
  ================================================================
  -   56.19%    35.41%  sleep    [kernel.kallsyms]  [k] page_fault
     - page_fault
        + 63.02% _dl_relocate_object
        + 36.98% clear_user

After:
    Children      Self  Command  Shared Object      Symbol
  ================================================================
  -   56.19%    35.41%  sleep    [kernel.kallsyms]  [k] page_fault
     - page_fault
        + 35.41% _dl_relocate_object
        + 20.78% clear_user

Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Milian Wolff <mail@milianw.de>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1411434104-5307-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf tools: Use ACCESS_ONCE() instead of volatile cast
Pranith Kumar [Tue, 23 Sep 2014 14:55:08 +0000 (10:55 -0400)]
perf tools: Use ACCESS_ONCE() instead of volatile cast

Use ACCESS_ONCE() instead of the cast to volatile and read. This is just
a style change which is reader friendly.

Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1411484109-10442-1-git-send-email-bobby.prani@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf tools: Modify error code for when perf_session__new() fails
Taeung Song [Wed, 24 Sep 2014 01:33:37 +0000 (10:33 +0900)]
perf tools: Modify error code for when perf_session__new() fails

Because perf_session__new() can fail for more reasons than just ENOMEM,
modify error code(ENOMEM or EINVAL) to -1.

Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1411522417-9917-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf tools: Fix perf record as non root with kptr_restrict == 1
Andi Kleen [Wed, 24 Sep 2014 21:39:54 +0000 (14:39 -0700)]
perf tools: Fix perf record as non root with kptr_restrict == 1

Currently perf record always errors out when you run it as non-root with
kptr_restrict == 1, which is often the default.

Make it only warn instead and fix the kernel resolve code to not
segfault later. Profiling works still fine, except kernel symbols are
not resolved.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1411594794-7229-1-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf stat: Fix --per-core on multi socket systems
Andi Kleen [Wed, 24 Sep 2014 20:50:46 +0000 (13:50 -0700)]
perf stat: Fix --per-core on multi socket systems

On systems with more than one socket perf stat --per-core would either
segfault or stop before outputting all cores.

The problem was that the output code referenced the id including the
socket number in the higher bits, which is far beyond any per cpu array.

Mask out the socket number before referencing cpus in abs_printout.

I also renamed the variable in nsec_printout to be clear what it is,
even though it doesn't reference cpus.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Stephane Eranian <eranian@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1411591846-32736-1-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoMerge tag 'perf-fdarray-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git...
Ingo Molnar [Fri, 26 Sep 2014 09:12:46 +0000 (11:12 +0200)]
Merge tag 'perf-fdarray-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/core

Pull perf tooling updates from Arnaldo Carvalho de Melo.

Infrastructure changes:

  * We were not handling POLLHUP notifications for event file descriptors.

    Fix it by filtering entries in the events file descriptor array after
    poll() returns, refcounting mmaps so that when the last fd pointing to
    a perf mmap goes away we do the unmap. (Arnaldo Carvalho de Melo)

User visible changes:

  * Now 'record' and 'trace' properly exit when a target thread exits.
    (Arnaldo Carvalho de Melo)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
10 years agoperf trace: Filter out POLLHUP'ed file descriptors
Arnaldo Carvalho de Melo [Mon, 22 Sep 2014 17:39:48 +0000 (14:39 -0300)]
perf trace: Filter out POLLHUP'ed file descriptors

So that we don't continue polling on vanished file descriptors, i.e.
file descriptors for events monitoring threads that exited.

I.e. the following 'trace' command now exits as expected, instead
of staying in an eternal loop:

      $ sleep 5s &
      $ trace -p `pidof sleep`

Reported-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-6qegv786zbf6i8us6t4rxug9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf record: Filter out POLLHUP'ed file descriptors
Arnaldo Carvalho de Melo [Wed, 13 Aug 2014 14:33:59 +0000 (11:33 -0300)]
perf record: Filter out POLLHUP'ed file descriptors

So that we don't continue polling on vanished file descriptors, i.e.
file descriptors for events monitoring threads that exited.

I.e. the following 'perf record' command now exits as expected, instead
of staying in an eternal loop:

  $ sleep 5s &
  $ perf record -p `pidof sleep`

Reported-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-8dg8o21t2ntzly2bfh53p3sg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf evlist: Unmap when all refcounts to fd are gone and events drained
Arnaldo Carvalho de Melo [Mon, 8 Sep 2014 14:27:49 +0000 (11:27 -0300)]
perf evlist: Unmap when all refcounts to fd are gone and events drained

As noticed by receiving a POLLHUP for all its pollfd entries.

That will remove the refcount taken in perf_evlist__mmap_per_evsel(),
and when all events are consumed via perf_evlist__mmap_read() +
perf_evlist__mmap_consume(), the ring buffer will be unmap'ed.

Thanks to Jiri Olsa for pointing out that we must wait till all events
are consumed, not being ok to unmmap just when receiving all the
POLLHUPs.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-t10w1xk4myp7ca7m9fvip6a0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agotools lib fd array: Allow associating an integer cookie with each entry
Arnaldo Carvalho de Melo [Mon, 8 Sep 2014 14:24:01 +0000 (11:24 -0300)]
tools lib fd array: Allow associating an integer cookie with each entry

We will use this in perf's evlist class so that it can, at
fdarray__filter() time, to unmap the associated ring buffer.

We may need to have further info associated with each fdarray entry, in
that case we'll make that int array a 'union fdarray_priv' one and put a
pointer there so that users can stash whatever they want there. For now,
an int is enough tho.

v2: Add clarification to the per array entry priv area, as well as make
    it a union, which makes usage a bit longer, but if/when we make it
    use more space by allowing per entry pointers existing users source
    code will not have to be changed, just rebuilt.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/n/tip-0p00bn83quck3fio3kcs9vca@git.kernel.org
10 years agoperf evlist: Refcount mmaps
Arnaldo Carvalho de Melo [Mon, 8 Sep 2014 16:26:35 +0000 (13:26 -0300)]
perf evlist: Refcount mmaps

We need to know how many fds are using a perf mmap via
PERF_EVENT_IOC_SET_OUTPUT, so that we can know when to ditch an mmap,
refcount it.

v2: Automatically unmap it when the refcount hits one, which will happen
when all fds are filtered by perf_evlist__filter_pollfd(), in later
patches.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20140908153824.GG2773@kernel.org
Link: http://lkml.kernel.org/n/tip-cpv7v2lw0g74ucmxa39xdpms@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agotools lib api: Adopt fdarray class from perf's evlist
Arnaldo Carvalho de Melo [Wed, 3 Sep 2014 21:02:59 +0000 (18:02 -0300)]
tools lib api: Adopt fdarray class from perf's evlist

The extensible file description array that grew in the perf_evlist class
can be useful for other tools, as it is not something that only evlists
need, so move it to tools/lib/api/fd to ease sharing it.

v2: Don't use {} like in:

 libapi_dirs:
$(QUIET_MKDIR)mkdir -p $(OUTPUT){fs,fd}/

in Makefiles, as it will not work in some systems, as in ubuntu13.10.

v3: Add fd/*.[ch] to LIBAPIKFS_SOURCES (Fix from Jiri Olsa)

v4: Leave the fcntl(fd, O_NONBLOCK) in the evlist layer, remains to
    be checked if it is really needed there, but has no place in the
    fdarray class (Fix from Jiri Olsa)

v5: Remove evlist details from fdarray grow/filter tests. Improve it a
    bit doing more tests about expected internal state.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-kleuni3hckbc3s0lu6yb9x40@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf evlist: Introduce poll method for common code idiom
Arnaldo Carvalho de Melo [Mon, 18 Aug 2014 20:25:59 +0000 (17:25 -0300)]
perf evlist: Introduce poll method for common code idiom

Since we have access two evlist members in all these poll calls, provide
a helper.

This will also help to make the patch introducing the pollfd class more
clear, as the evlist specific uses will be hiden away
perf_evlist__poll().

Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-jr9d4aop4lvy9453qahbcgp0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf kvm stat live: Use perf_evlist__add_pollfd() instead of local equivalent
Arnaldo Carvalho de Melo [Mon, 18 Aug 2014 20:12:30 +0000 (17:12 -0300)]
perf kvm stat live: Use perf_evlist__add_pollfd() instead of local equivalent

Since we can add file descriptors to the evlist pollfd and it will
autogrow, no need to copy all events to a local pollfd array, just add
the timer and stdin file descriptors.

Reviewed-by: David Ahern <dsahern@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-2hvp9iromiheh6rl4oaa08x5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf tests: Add pollfd growing test
Arnaldo Carvalho de Melo [Mon, 18 Aug 2014 19:49:00 +0000 (16:49 -0300)]
perf tests: Add pollfd growing test

  [acme@ssdandy linux]$ perf test "Add fd"
  34: Add fd to pollfd array, making it autogrow             : Ok
  [acme@ssdandy linux]$ perf test -v "Add fd"
  34: Add fd to pollfd array, making it autogrow             :
  --- start ---
  test child forked, pid 19817

  before growing array:   2 [ 1, 2 ]
  after 3rd add_pollfd:   3 [ 1, 2, 35 ]
  after 4th add_pollfd:   4 [ 1, 2, 35, 88 ]
  test child finished with 0
  ---- end ----
  Add fd to pollfd array, making it autogrow: Ok
  [acme@ssdandy linux]$

Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-smflpyta146bzog7z0effjss@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf evlist: Allow growing pollfd on add method
Arnaldo Carvalho de Melo [Mon, 18 Aug 2014 19:44:06 +0000 (16:44 -0300)]
perf evlist: Allow growing pollfd on add method

This way we will be able to add more file descriptors to be polled,
like stdin or some timer fd.

At this point we might as well yank the pollfd class from evlist so that
it can be used in other places.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-o2mzsjl7taumsoc35ryol00i@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf evlist: We need to poll all event file descriptors
Arnaldo Carvalho de Melo [Mon, 8 Sep 2014 15:55:12 +0000 (12:55 -0300)]
perf evlist: We need to poll all event file descriptors

Because we want to notice when they get POLLHUP'ed, so that we can
figure out when all threads exited in a workload being monitored.

We can't just monitor the fds that were mmaped, we need to notice when
all the fds that were PERF_EVENT_IOC_SET_OUTPUT'ed too, because the mmap
stays even after the fd that originally was used to do the mmap call
went away, its only when all the set-output fds for a mmap are gone that
the mmap is.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20140908151016.GH17728@krava.brq.redhat.com
Link: http://lkml.kernel.org/n/tip-24omlq5asrfg4uo3muuzn2bl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf evlist: Monitor POLLERR and POLLHUP events too
Arnaldo Carvalho de Melo [Wed, 13 Aug 2014 14:26:21 +0000 (11:26 -0300)]
perf evlist: Monitor POLLERR and POLLHUP events too

We want to know when the fd went away, like when a monitored thread
exits.

If we do not monitor such events, then the tools will wait forever on
events from a vanished thread, like when running:

 $ sleep 5s &
 $ perf record -p `pidof sleep`

This builds upon the kernel patch by Jiri Olsa that actually makes a
poll on those file descriptors to return POLLHUP.

It is also needed to change the tools to use
perf_evlist__filter_pollfd() to check if there are remainings fds to
monitor or if all are gone, in which case they will exit the
poll/mmap/read loop.

Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-a4fslwspov0bs69nj825hqpq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf tests: Add test for perf_evlist__filter_pollfd()
Arnaldo Carvalho de Melo [Wed, 13 Aug 2014 02:34:06 +0000 (23:34 -0300)]
perf tests: Add test for perf_evlist__filter_pollfd()

That will use a synthetic evlist with just what is touched by this new
method to check that it works as expected.

Output in verbose mode:

  $ perf test -v pollfd
  33: Filter fds with revents mask in a pollfd array         :
  --- start ---
  filtering all but pollfd[2]:
  before:   5 [ 5, 4, 3, 2, 1 ]
   after:   1 [ 3 ]
  filtering all but (pollfd[0], pollfd[3]):
  before:   5 [ 5, 4, 3, 2, 1 ]
   after:   2 [ 5, 2 ]
  test child finished with 0
  ---- end ----
  Filter fds with revents mask in a pollfd array: Ok
  $

Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-x7c8liszdvc3ocmanf2cet8p@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf evlist: Introduce perf_evlist__filter_pollfd method
Arnaldo Carvalho de Melo [Wed, 13 Aug 2014 02:04:11 +0000 (23:04 -0300)]
perf evlist: Introduce perf_evlist__filter_pollfd method

To remove all entries in evlist->pollfd[] that have revents matching at
least one of the bits in the specified mask.

It'll adjust evlist->nr_fds to the number of unfiltered fds and will
return this value, as a convenience and to avoid requiring direct access
to internal state of perf_evlist objects.

This will be used after polling the evlist fds so that we remove fds
that were closed by the kernel.

Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-y2sca7z3wicvvy40a50lozwm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf/x86/intel/uncore: Update support for client uncore IMC PMU
Stephane Eranian [Wed, 17 Sep 2014 09:06:16 +0000 (11:06 +0200)]
perf/x86/intel/uncore: Update support for client uncore IMC PMU

This patch restructures the memory controller (IMC) uncore PMU support
for client SNB/IVB/HSW processors. The main change is that it can now
cope with more than one PCI device ID per processor model. There are
many flavors of memory controllers for each processor. They have
different PCI device ID, yet they behave the same w.r.t. the memory
controller PMU that we are interested in.

The patch now supports two distinct memory controllers for IVB
processors: one for mobile, one for desktop.

Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140917090616.GA11281@quad
Cc: ak@linux.intel.com
Cc: kan.liang@intel.com
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
10 years agoperf/x86/intel/uncore: Fix PCU filter setup for Sandy/Ivy/Haswell EP
Andi Kleen [Thu, 4 Sep 2014 23:08:29 +0000 (16:08 -0700)]
perf/x86/intel/uncore: Fix PCU filter setup for Sandy/Ivy/Haswell EP

The PCU frequency band filters use 8 bit each in a register.
When setting up the value the shift value was not correctly
scaled, which resulted in all filters except for band 0 to
be zero. Fix the scaling.

This allows to correctly monitor multiple uncore frequency bands.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1409872109-31645-5-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
10 years agoperf/x86/intel/uncore: Add missing cbox filter flags on IvyBridge-EP uncore driver
Andi Kleen [Thu, 4 Sep 2014 23:08:28 +0000 (16:08 -0700)]
perf/x86/intel/uncore: Add missing cbox filter flags on IvyBridge-EP uncore driver

The IvyBridge-EP uncore driver was missing three filter flags:
NC, ISOC, C6 which are useful in some cases. Support them in the same way
as the Haswell EP driver, by allowing to set them and exposing
them in the sysfs formats.

Also fix a typo in a define.

Relies on the Haswell EP driver to be applied earlier.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1409872109-31645-4-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
10 years agoperf/x86/intel/uncore: Register the PMU only if the uncore pci device exists
Yan, Zheng [Thu, 4 Sep 2014 23:08:27 +0000 (16:08 -0700)]
perf/x86/intel/uncore: Register the PMU only if the uncore pci device exists

Current code registers PMUs for all possible uncore pci devices.
This is not good because, on some machines, one or more uncore pci
devices can be missing. The missing pci device make corresponding
PMU unusable. Register the PMU only if the uncore device exists.

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1409872109-31645-3-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
10 years agoperf/x86/intel/uncore: Add Haswell-EP uncore support
Yan, Zheng [Thu, 4 Sep 2014 23:08:26 +0000 (16:08 -0700)]
perf/x86/intel/uncore: Add Haswell-EP uncore support

The uncore subsystem in Haswell-EP is similar to Sandy/Ivy
Bridge-EP. There are some differences in config register
encoding and pci device IDs. The Haswell-EP uncore also
supports a few new events. Add the Haswell-EP driver to
the snbep split driver.

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
[ Add missing break. Add imc events. Add cbox nc/isoc/c6. ]
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1409872109-31645-2-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
10 years agoperf/x86/intel: Use Broadwell cache event list for Haswell
Andi Kleen [Tue, 2 Sep 2014 18:44:15 +0000 (11:44 -0700)]
perf/x86/intel: Use Broadwell cache event list for Haswell

Use the newly added Broadwell cache event list for Haswell too.
All Haswell and Broadwell events and offcore masks used in these lists
are identical.

However Haswell is very different from the Sandy Bridge
list that was used previously. That fixes a wide range of mis-counting
cache events.

The node events are now only for retired memory events, so prefetching
and speculative memory accesses are not included. They are PEBS
capable now, which makes it much easier to sample for them, plus it's
possible to create address maps with -d.

The prefetch events are gone now. They way the hardware counts
them is very misleading (some prefetches included, others not), so
it seemed best to leave them out.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1409683455-29168-5-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
10 years agoperf/x86: Add INST_RETIRED.ALL workarounds
Andi Kleen [Tue, 2 Sep 2014 18:44:14 +0000 (11:44 -0700)]
perf/x86: Add INST_RETIRED.ALL workarounds

On Broadwell INST_RETIRED.ALL cannot be used with any period
that doesn't have the lowest 6 bits cleared. And the period
should not be smaller than 128.

Add a new callback to enforce this, and set it for Broadwell.

This is erratum BDM57 and BDM11.

How does this handle the case when an app requests a specific
period with some of the bottom bits set

The apps thinks it is sampling at X occurences per sample, when it is
in fact at X - 63 (worst case).

Short answer:

Any useful instruction sampling period needs to be 4-6 orders
of magnitude larger than 128, as an PMI every 128 instructions
would instantly overwhelm the system and be throttled.
So the +-64 error from this is really small compared to the
period, much smaller than normal system jitter.

Long answer:

<write up by Peter:>

IFF we guarantee perf_event_attr::sample_period >= 128.

Suppose we start out with sample_period=192; then we'll set period_left
to 192, we'll end up with left = 128 (we truncate the lower bits). We
get an interrupt, find that period_left = 64 (>0 so we return 0 and
don't get an overflow handler), up that to 128. Then we trigger again,
at n=256. Then we find period_left = -64 (<=0 so we return 1 and do get
an overflow). We increment with sample_period so we get left = 128. We
fire again, at n=384, period_left = 0 (<=0 so we return 1 and get an
overflow). And on and on.

So while the individual interrupts are 'wrong' we get then with
interval=256,128 in exactly the right ratio to average out at 192. And
this works for everything >=128.

So the num_samples*fixed_period thing is still entirely correct +- 127,
which is good enough I'd say, as you already have that error anyhow.

So no need to 'fix' the tools, al we need to do is refuse to create
INST_RETIRED:ALL events with sample_period < 128.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com>
Cc: Mark Davies <junk@eslaf.co.uk>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1409683455-29168-4-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
10 years agoperf/x86/intel: Add Broadwell core support
Andi Kleen [Tue, 2 Sep 2014 18:44:13 +0000 (11:44 -0700)]
perf/x86/intel: Add Broadwell core support

Add Broadwell support for Broadwell Client to perf.  This is very
similar to Haswell.  It uses a new cache event table, because there
were various changes there.

The constraint list has one new event that needs to be handled over
Haswell.

The PEBS event list is the same, so we reuse Haswell's.

[fengguang.wu: make intel_bdw_event_constraints[] static]
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1409683455-29168-3-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
10 years agoperf/x86/intel: Document all Haswell models
Andi Kleen [Tue, 2 Sep 2014 18:44:12 +0000 (11:44 -0700)]
perf/x86/intel: Document all Haswell models

Add names for each Haswell model as requested by Peter.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1409683455-29168-2-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
10 years agoperf/x86/intel: Remove incorrect model number from Haswell perf
Andi Kleen [Tue, 2 Sep 2014 18:44:11 +0000 (11:44 -0700)]
perf/x86/intel: Remove incorrect model number from Haswell perf

71 is a Broadwell, not a Haswell. The model number was added
by mistake earlier.

Remove it for now, until it can be re-added later with
real Broadwell support.

In practice it does not cause a lot of issues because the Broadwell
PMU is very similar to Haswell, but some details were wrong,
and it's better to handle it correctly.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: eranian@google.com
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Link: http://lkml.kernel.org/r/1409683455-29168-1-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
10 years agoRevert "perf: Do not allow optimized switch for non-cloned events"
Jiri Olsa [Fri, 12 Sep 2014 11:18:28 +0000 (13:18 +0200)]
Revert "perf: Do not allow optimized switch for non-cloned events"

This reverts commit 1f9a7268c67f0290837aada443d28fd953ddca90.

With the fix of the initial state for the cloned event we now correctly
handle the error described in:

  1f9a7268c67f perf: Do not allow optimized switch for non-cloned events

so we can revert it.

I made an automated test for this, but its not suitable for automated
perf tests framework. It needs to be customized for each machine (the
more cpu the higher numbers for GROUPS/WORKERS/BYTES) and it could take
longer time to hit the issue.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20140910143535.GD2409@krava.brq.redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
10 years agoperf: Fix child event initial state setup
Jiri Olsa [Fri, 12 Sep 2014 11:18:27 +0000 (13:18 +0200)]
perf: Fix child event initial state setup

Currently we initialize the child event based on the original
parent state. This is wrong, because the original parent event
(and its state) is not related to current fork and also could
be already gone.

We need to initialize the child state based on the immediate
parent event state.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1410520708-19275-2-git-send-email-jolsa@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
10 years agoperf: Do not POLLHUP event if it has children
Jiri Olsa [Fri, 12 Sep 2014 11:18:26 +0000 (13:18 +0200)]
perf: Do not POLLHUP event if it has children

Currently we return POLLHUP in event polling if the monitored
process is done, but we didn't consider possible children,
that might be still running and producing data.

Before returning POLLHUP making sure that:

   1) the monitored task has exited and that
   2) we don't have any children to monitor

Also adding parent wakeup when the child event is gone.

Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1410520708-19275-1-git-send-email-jolsa@kernel.org
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
10 years agoMerge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git...
Ingo Molnar [Fri, 19 Sep 2014 05:13:36 +0000 (07:13 +0200)]
Merge tag 'perf-core-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

User visible changes:

  o Add +field argument support for --sort option (Jiri Olsa)

  o Do not access kallsyms when analyzing user binaries with 'probe' (Masami Hiramatsu)

  o Ignore stripped vmlinux and fallback to kallsyms (Anton Blanchard)

  o Add path to Ubuntu kernel debuginfo file (Anton Blanchard)

  o Disable kernel symbol demangling by default (Avi Kivity)

Infrastructure changes:

  o More intel PT prep work, from Adrian Hunter, including:

    - Let a user specify a PMU event without any config terms
    - Add perf-with-kcore script
    - Let default config be defined for a PMU
    - Add perf_pmu__scan_file()

  o "perf kvm stat report" improvements by Alexander Yarygin:
    o  Save pid string in opts.target.pid
    o  Enable the target.system_wide flag
    o  Unify the title bar output

  o Fix build issue on powerpc when DWARF support is disabled (Anton Blanchard)

  o Allow to specify lib compile variable for spec usage (Jiri Olsa)

  o Fix build on ARM (Stephane Eranian)

  o Fix build on powerpc when DWARF support is disabled (Anton Blanchard)

  o Don't include sys/poll.h directly (Arnaldo Carvalho de Melo)

  o Use ring buffer consume method to look like other tools (Arnaldo Carvalho de Melo)

  o Allow to specify lib compile variable for spec usage (Jiri Olsa)

  o Fix GNU-only grep usage in Makefile (John Spencer)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
10 years agoperf record: Use ring buffer consume method to look like other tools
Arnaldo Carvalho de Melo [Wed, 17 Sep 2014 19:42:58 +0000 (16:42 -0300)]
perf record: Use ring buffer consume method to look like other tools

All builtins that consume events from perf's ring buffer now end up
calling perf_evlist__mmap_consume(), which will allow unmapping the ring
buffer when all the fds gets closed and all events in the buffer
consumed.

This is in preparation for the patchkit that will notice POLLHUP on
perf events file descriptors.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-8vhaeeoq11ppz0713el4xcps@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf probe: Do not use dwfl_module_addrsym if dwarf_diename finds symbol name
Masami Hiramatsu [Wed, 17 Sep 2014 08:41:01 +0000 (08:41 +0000)]
perf probe: Do not use dwfl_module_addrsym if dwarf_diename finds symbol name

Do not use dwfl_module_addrsym if dwarf_diename can find the symbol
name, since dwfl_module_addrsym can be failed on shared libraries.

Without this patch
  ----
  $ perf probe -x ../lib/traceevent/libtraceevent.so -V create_arg_op
  Failed to find symbol at 0x11df1
  Failed to find the address of create_arg_op
    Error: Failed to show vars.
  ----
With this patch
  ----
  $ perf probe -x ../lib/traceevent/libtraceevent.so -V create_arg_op
  Available variables at create_arg_op
          @<create_arg_op+0>
                  enum filter_op_type     btype
                  struct filter_arg*      arg
  ----

This bug was reported on linux-perf-users@vger.kernel.org.

Reported-by: david lerner <dlernerdroid@gmail.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: david lerner <dlernerdroid@gmail.com>
Cc: linux-perf-user@vger.kernel.org
Cc: yrl.pp-manager.tt@hitachi.com
Link: http://permalink.gmane.org/gmane.linux.kernel.perf.user/1691
Link: http://lkml.kernel.org/r/20140917084101.3722.25299.stgit@kbuild-f20.novalocal
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf probe: Do not access kallsyms when analyzing user binaries
Masami Hiramatsu [Wed, 17 Sep 2014 08:40:54 +0000 (08:40 +0000)]
perf probe: Do not access kallsyms when analyzing user binaries

Do not access kallsyms to show available variables and show source lines
in user binaries.

This behavior always requires the root privilege when sysctl sets
kernel.kptr_restrict=1, but we don't need it just for analyzing user
binaries.

Without this patch (by normal user, kptr_restrict=1):
  ----
  $ perf probe -x ./perf -V add_cmdname
  Failed to init vmlinux path.
    Error: Failed to show vars.
  $ perf probe -x ./perf -L add_cmdname
  Failed to init vmlinux path.
    Error: Failed to show lines.
  ----

With this patch:
  ----
  $ perf probe -x ./perf -V add_cmdname
  Available variables at add_cmdname
          @<perf_unknown_cmd_config+144>
                  (No matched variables)
          @<list_commands_in_dir+160>
                  (No matched variables)
          @<add_cmdname+0>
                  char*   name
                  size_t  len
                  struct cmdnames*        cmds
  $ perf probe -x ./perf -L add_cmdname
  <add_cmdname@/home/fedora/ksrc/linux-3/tools/perf/util/help.c:0>
        0  void add_cmdname(struct cmdnames *cmds, const char *name, size_t len)
        1  {
        2         struct cmdname *ent = malloc(sizeof(*ent) + len + 1);

        4         ent->len = len;
        5         memcpy(ent->name, name, len);
        6         ent->name[len] = 0;
  ...
  ----

Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: david lerner <dlernerdroid@gmail.com>
Cc: linux-perf-user@vger.kernel.org
Cc: yrl.pp-manager.tt@hitachi.com
Link: http://lkml.kernel.org/r/20140917084054.3722.73975.stgit@kbuild-f20.novalocal
[ Added missing 'bool user' argument to the !DWARF show_line_range() stub ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf symbols: Add path to Ubuntu kernel debuginfo file
Anton Blanchard [Mon, 15 Sep 2014 19:57:56 +0000 (16:57 -0300)]
perf symbols: Add path to Ubuntu kernel debuginfo file

Ubuntu places the kernel debuginfo in /usr/lib/debug/boot/vmlinux-*

Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-`ranpwd
Link: http://lkml.kernel.org/r/20140909091152.2698c0f7@kryten
[ Adapted it to use the perf.data file kernel version as in 0a7e6d1b6844 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf symbols: Ignore stripped vmlinux and fallback to kallsyms
Anton Blanchard [Mon, 8 Sep 2014 22:59:29 +0000 (08:59 +1000)]
perf symbols: Ignore stripped vmlinux and fallback to kallsyms

If a vmlinux is stripped, perf will use it and ignore kallsyms. We
end up with useless profiles where everything maps to a few
runtime symbols:

    63.39%       swapper  [kernel.kallsyms]   [k] hcall_real_table
     4.90%      beam.smp  [kernel.kallsyms]   [k] hcall_real_table
     4.44%      beam.smp  [kernel.kallsyms]   [k] __sched_text_start
     3.72%      beam.smp  [kernel.kallsyms]   [k] __run_at_kexec

Detect this case and fallback to using kallsyms. This fixes the issue:

    62.81%       swapper  [kernel.kallsyms]   [k] snooze_loop
     4.44%      beam.smp  [kernel.kallsyms]   [k] __schedule
     0.91%      beam.smp  [kernel.kallsyms]   [k] _switch
     0.73%      beam.smp  [kernel.kallsyms]   [k] put_prev_entity

Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20140909085929.4a5a81f0@kryten
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf tools: define _DEFAULT_SOURCE for glibc_2.20
Chanho Park [Fri, 12 Sep 2014 02:10:17 +0000 (11:10 +0900)]
perf tools: define _DEFAULT_SOURCE for glibc_2.20

_BSD_SOURCE was deprecated in favour of _DEFAULT_SOURCE since glibc
2.20[1]. To avoid build warning on glibc2.20, _DEFAULT_SOURCE should
also be defined.

[1]: https://sourceware.org/glibc/wiki/Release/2.20

Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1410487817-13403-1-git-send-email-chanho61.park@samsung.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf tools: Don't include sys/poll.h directly
Arnaldo Carvalho de Melo [Mon, 15 Sep 2014 18:54:34 +0000 (15:54 -0300)]
perf tools: Don't include sys/poll.h directly

Include poll.h instead.

Fixes the following warning in systems with musl's libc:

  /usr/include/sys/poll.h:1:2: warning: #warning redirecting incorrect #include
  <sys/poll.h> to <poll.h> [-Wcpp]

Reported-by: John Spencer <maillist-linux@barfooze.de>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://thread.gmane.org/gmane.linux.kernel.perf.user/1687/focus=1690
Link: http://lkml.kernel.org/n/tip-k4ocrq1de3fk146oevy346bi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf tools: Fix GNU-only grep usage in Makefile
John Spencer [Mon, 25 Aug 2014 19:36:32 +0000 (21:36 +0200)]
perf tools: Fix GNU-only grep usage in Makefile

This makes it work with non-GNU grep's as well.

Signed-off-by: John Spencer <maillist-linux@barfooze.de>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: http://thread.gmane.org/gmane.linux.kernel.perf.user/1686
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf tools: Disable kernel symbol demangling by default
Avi Kivity [Sat, 13 Sep 2014 04:15:05 +0000 (07:15 +0300)]
perf tools: Disable kernel symbol demangling by default

Some Linux symbols (for example __vt_event_wait) are interpreted by the
demangler as C++ mangled names, which of course they aren't.

Disable kernel symbol demangling by default to avoid this, and allow
enabling it with a new option --demangle-kernel for those who wish it.

Reported-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Avi Kivity <avi@cloudius-systems.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1410581705-26968-1-git-send-email-avi@cloudius-systems.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf tool: fix compilation for ARM
Stephane Eranian [Fri, 5 Sep 2014 04:21:04 +0000 (06:21 +0200)]
perf tool: fix compilation for ARM

This patch fixes ARM compile of the perf tool.  The debug.h header file
was missing from a couple of unwind related modules.

Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140905042103.GA3091@quad
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf tools: Add perf_pmu__scan_file()
Adrian Hunter [Thu, 31 Jul 2014 06:00:50 +0000 (09:00 +0300)]
perf tools: Add perf_pmu__scan_file()

Add a function to scan a sysfs file within the pmu device directory.

This will be used to read capability values from the PMU 'caps'
subdirectory.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1406786474-9306-8-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf tools: Let default config be defined for a PMU
Adrian Hunter [Thu, 31 Jul 2014 06:00:49 +0000 (09:00 +0300)]
perf tools: Let default config be defined for a PMU

This allows default config terms to be provided for a PMU. So, for
example, when the Intel PT PMU is added, it will be possible to specify:

intel_pt//

which will be the same as:

intel_pt/tsc=1,noretcomp=0/

meaning that the trace should contain TSC timestamps and perform 'return
compression'.

An important consideration of this patch is that it must be possible to
overwrite the default values.  That has meant changing the logic so that
a zero value can replace a non-zero value.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1406786474-9306-7-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf tools: Add perf-with-kcore script
Adrian Hunter [Thu, 31 Jul 2014 06:01:12 +0000 (09:01 +0300)]
perf tools: Add perf-with-kcore script

Decoding an Intel PT trace of the kernel requires an accurate kernel
object image.  This is provided by making a copy of kcore.  However the
copy needs to be made under the same conditions as the original
recording, and then it needs to be associated with the perf.data file.
The perf-with-kcore script does that.

The script also checks the permissions on the buildid cache and can be
used to fix them.  That is needed for distributions where root does not
have a home directory and consequently writes to the same buildid cache
as the user, resulting in cached files that the user does not have
access to.

Example:

$ ./perf-with-kcore
Usage: perf-with-kcore <perf sub-command> <perf.data directory> [<sub-command options> [ -- <workload>]]
       <perf sub-command> can be record, script, report or inject
   or: perf-with-kcore fix_buildid_cache_permissions
$ ./perf-with-kcore record pt_uname -e intel_pt// -- uname
Recording
Using /home/ahunter/bin/perf
perf version 3.15.rc3.g4549ba
/home/ahunter/bin/perf record -o pt_uname/perf.data -e intel_pt//  -- uname
Linux
[ perf record: Woken up 3 times to write data ]
[ perf record: Captured and wrote 0.023 MB pt_uname/perf.data ]
Copying kcore
[sudo] password for ahunter:
Done
$ tools/perf/perf-with-kcore.sh script pt_uname | head
Using /home/ahunter/bin/perf
perf version 3.15.rc3.g4549ba
/home/ahunter/bin/perf script -i pt_uname/perf.data --kallsyms=pt_uname/kcore_dir/kallsyms
         swapper     0 [002] 161533.969666: sched:sched_switch: swapper/2:0 [120] R ==> perf:11316 [120]
          :11315 11315 [003] 161533.969704: sched:sched_switch: perf:11315 [120] S ==> swapper/3:0 [120]
          :11316 11316 [002] 161533.969783: sched:sched_switch: perf:11316 [120] R ==> migration/2:33 [0]
             :33    33 [002] 161533.969791: sched:sched_switch: migration/2:33 [0] S ==> swapper/2:0 [120]
         swapper     0 [003] 161533.969792: sched:sched_switch: swapper/3:0 [120] R ==> perf:11316 [120]
          :11316 11316 [003] 161533.970062: branches:                 0 [unknown] ([unknown]) => ffffffff810532fa native_write_msr_safe ([kernel.kallsyms])
          :11316 11316 [003] 161533.970062: branches:  ffffffff810532fd native_write_msr_safe ([kernel.kallsyms]) => ffffffff81035b31 pt_config_start ([kernel.kallsyms])

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1406786474-9306-30-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf tools: Let a user specify a PMU event without any config terms
Adrian Hunter [Fri, 15 Aug 2014 19:08:40 +0000 (22:08 +0300)]
perf tools: Let a user specify a PMU event without any config terms

This enables a PMU event to be specified in the form:

pmu//

which is effectively the same as:

pmu/config=0/

This patch is a precursor to defining default config for a PMU.

Further explanation extracted from lkml thread:

Imagine that the 'tsc' term did not exist.

Intel PT trace data would not contain TSC packets, and the decoder would
not know how to decode them.

Then imagine that a new version of the hardware adds 'tsc'.

It is such a useful feature that we want it by default, but older
versions of the tools don't know how to decode it, so the kernel cannot
turn it on by default.

It is similar to why the kernel does not select perf_event_attr.mmap2 by
default.

The kernel doesn't know whether the tool supports it.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1408129739-17368-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf tools: Allow to specify lib compile variable for spec usage
Jiri Olsa [Mon, 25 Aug 2014 14:55:52 +0000 (16:55 +0200)]
perf tools: Allow to specify lib compile variable for spec usage

We need a way to specify $(lib) part of the installation path for
traceevent plugin libraries. Currently we use 'lib64' for x86_64 and
'lib' otherwise.

Instead of listing all possible values, this change allows the rpm spec
code to specify the correct $(lib) part based on processed architecture,
like

  $ make ... lib=%{_lib}

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kyle McMartin <kyle@mcmartin.ca>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1408978552-17131-1-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf kvm stat report: Unify the title bar output
Alexander Yarygin [Mon, 1 Sep 2014 13:44:55 +0000 (17:44 +0400)]
perf kvm stat report: Unify the title bar output

The 'live' command prints additional information to the "Analyze events
for " title bar about the current target.  Let's print the same title
for the 'report' command.

Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1409579095-12963-4-git-send-email-yarygin@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf kvm stat report: Enable the target.system_wide flag
Alexander Yarygin [Mon, 1 Sep 2014 13:44:54 +0000 (17:44 +0400)]
perf kvm stat report: Enable the target.system_wide flag

The 'perf kvm stat report' command can be used to analyze events either
for system wide or for specific pids.

Let's enable kvm->opts.target.system_wide flag when 'report' command is
running for system-wide analyzing. This helps to sync kvm->opts.target
values in 'report' and 'live' commands.

Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1409579095-12963-3-git-send-email-yarygin@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf kvm stat report: Save pid string in opts.target.pid
Alexander Yarygin [Mon, 1 Sep 2014 13:44:53 +0000 (17:44 +0400)]
perf kvm stat report: Save pid string in opts.target.pid

The 'perf kvm stat report' command uses the kvm->pid_str field to keep
the value of the --pid option. Let's use kvm->opts.target.pid instead.

Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1409579095-12963-2-git-send-email-yarygin@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf tools powerpc: Fix build issue when DWARF support is disabled
Anton Blanchard [Mon, 25 Aug 2014 08:25:06 +0000 (18:25 +1000)]
perf tools powerpc: Fix build issue when DWARF support is disabled

The powerpc skip callchain code uses DWARF, so we must disable it if
DWARF is disabled.

Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20140825182506.2be6512d@kryten
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf tools: Add +field argument support for --sort option
Jiri Olsa [Sat, 23 Aug 2014 12:59:48 +0000 (14:59 +0200)]
perf tools: Add +field argument support for --sort option

Adding support to add field(s) to default sort order via using the '+'
prefix, like for report:

  $ perf report
  Samples: 2K of event 'cycles', Event count (approx.): 882172583
  Overhead  Command  Shared Object        Symbol
     7.39%  swapper  [kernel.kallsyms]    [k] intel_idle
     1.97%  firefox  libpthread-2.17.so   [.] pthread_mutex_lock
     1.39%  firefox  [snd_hda_intel]      [k] azx_get_position
     1.11%  firefox  libpthread-2.17.so   [.] pthread_mutex_unlock

  $ perf report -s +cpu
  Samples: 2K of event 'cycles', Event count (approx.): 882172583
  Overhead  Command  Shared Object        Symbol                  CPU
     2.89%  swapper  [kernel.kallsyms]    [k] intel_idle          000
     2.61%  swapper  [kernel.kallsyms]    [k] intel_idle          002
     1.20%  swapper  [kernel.kallsyms]    [k] intel_idle          001
     0.82%  firefox  libpthread-2.17.so   [.] pthread_mutex_lock  002

Works in general for commands using --sort option.

v2 with changes suggested:
  - Use dynamic memory instead static buffer
  - Fix error message typo

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20140823125948.GA1193@krava.brq.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
10 years agoperf: Do not check PERF_EVENT_STATE_EXIT on syscall read path
Jiri Olsa [Mon, 8 Sep 2014 14:31:07 +0000 (16:31 +0200)]
perf: Do not check PERF_EVENT_STATE_EXIT on syscall read path

Revert PERF_EVENT_STATE_EXIT check on read syscall path.
It breaks standard way to read counter, which is to open
the counter, wait for the monitored process to die and
read the counter.

Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Stephane Eranian <eranian@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/20140908143107.GG17728@krava.brq.redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
10 years agoperf/x86: Fix section mismatch in split uncore driver
Andi Kleen [Fri, 29 Aug 2014 17:20:58 +0000 (10:20 -0700)]
perf/x86: Fix section mismatch in split uncore driver

The new split Intel uncore driver code that recently went
into tip added a section mismatch, which the build process
complains about.

uncore_pmu_register() can be called from uncore_pci_probe,()
which is not __init and can be called from pci driver ->probe.
I'm not fully sure if it's actually possible to call the probe
function later, but it seems safer to mark uncore_pmu_register
not __init.

This also fixes the warning.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1409332858-29039-1-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
10 years agoperf/x86/intel: Mark initialization code as such
Mathias Krause [Tue, 26 Aug 2014 16:49:45 +0000 (18:49 +0200)]
perf/x86/intel: Mark initialization code as such

A few of the initialization functions are missing the __init annotation.
Fix this and thereby allow ~680 additional bytes of code to be released
after initialization.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/1409071785-26015-1-git-send-email-minipli@googlemail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
10 years agoperf/core: Replace rcu_assign_pointer() with RCU_INIT_POINTER()
Andreea-Cristina Bernat [Fri, 22 Aug 2014 13:26:05 +0000 (16:26 +0300)]
perf/core: Replace rcu_assign_pointer() with RCU_INIT_POINTER()

The use of "rcu_assign_pointer()" is NULLing out the pointer.
According to RCU_INIT_POINTER()'s block comment:

  "1.   This use of RCU_INIT_POINTER() is NULLing out the pointer"

it is better to use it instead of rcu_assign_pointer() because it has a
smaller overhead.

The following Coccinelle semantic patch was used:
  @@
  @@

  - rcu_assign_pointer
  + RCU_INIT_POINTER
    (..., NULL)

Signed-off-by: Andreea-Cristina Bernat <bernat.ada@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Link: http://lkml.kernel.org/r/20140822132605.GA20130@ada
Signed-off-by: Ingo Molnar <mingo@kernel.org>
10 years agoperf/callchain: Replace rcu_assign_pointer() with RCU_INIT_POINTER()
Andreea-Cristina Bernat [Fri, 22 Aug 2014 14:15:36 +0000 (17:15 +0300)]
perf/callchain: Replace rcu_assign_pointer() with RCU_INIT_POINTER()

The use of "rcu_assign_pointer()" is NULLing out the pointer.
According to RCU_INIT_POINTER()'s block comment:

 "1.   This use of RCU_INIT_POINTER() is NULLing out the pointer"

it is better to use it instead of rcu_assign_pointer() because it has a
smaller overhead.

 The following Coccinelle semantic patch was used:
 @@
 @@

 - rcu_assign_pointer
 + RCU_INIT_POINTER
   (..., NULL)

Signed-off-by: Andreea-Cristina Bernat <bernat.ada@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: paulmck@linux.vnet.ibm.com
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Link: http://lkml.kernel.org/r/20140822141536.GA32051@ada
Signed-off-by: Ingo Molnar <mingo@kernel.org>
10 years agoMerge tag 'v3.17-rc4' into perf/core, to pick up fixes
Ingo Molnar [Tue, 9 Sep 2014 04:48:07 +0000 (06:48 +0200)]
Merge tag 'v3.17-rc4' into perf/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>
10 years agoLinux 3.17-rc4
Linus Torvalds [Sun, 7 Sep 2014 23:09:43 +0000 (16:09 -0700)]
Linux 3.17-rc4

10 years agoDocumentation: new page link in SubmittingPatches
Sudip Mukherjee [Sun, 7 Sep 2014 18:26:12 +0000 (11:26 -0700)]
Documentation: new page link in SubmittingPatches

new link for - How to piss off a Linux kernel subsystem maintainer

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agoDocumentation: NFS/RDMA: Document separate Kconfig symbols
Paul Bolle [Sun, 7 Sep 2014 18:25:55 +0000 (11:25 -0700)]
Documentation: NFS/RDMA: Document separate Kconfig symbols

The NFS/RDMA Kconfig symbol was split into separate options for client
and server in commit 2e8c12e1b765 ("xprtrdma: add separate Kconfig
options for NFSoRDMA client and server support").

Update the documentation to reflect this split.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "J. Bruce Fields" <bfields@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agoDocumentation: misc-devices: Rename freefall.c from hpfall.c in lis2lv02d
Masanari Iida [Sun, 7 Sep 2014 18:25:45 +0000 (11:25 -0700)]
Documentation: misc-devices: Rename freefall.c from hpfall.c in lis2lv02d

hpfall.c was renamed to freefall.c in 3.16, but this file still refer to
hpfall.c instead of freefall.c

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agoDocumentation: i2c: rename variable "register" to "reg"
Jose Manuel Alarcon Roldan [Sun, 7 Sep 2014 18:25:00 +0000 (11:25 -0700)]
Documentation: i2c: rename variable "register" to "reg"

The example code provided with the i2c device interface documentation
won't compile since it uses the reserved word "register" to name a
variable.

The compiler fails with this error message:

 error: expected identifier or '(' before '=' token
   __u8 register = 0x20; /* Device register to access */
                 ^

Rename the variable "register" to simply "reg" in the example code.

Another couple of typos has been fixed as well.
[Change "! =" to "!=".]

Signed-off-by: Jose Alarcon Roldan <jose.alarcon.roldan@gmail.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agoDocumentation: seq_file: Document seq_open_private(), seq_release_private()
Rob Jones [Sun, 7 Sep 2014 18:24:40 +0000 (11:24 -0700)]
Documentation: seq_file: Document seq_open_private(), seq_release_private()

Despite the fact that these functions have been around for years, they
are little used (only 15 uses in 13 files at the preseht time) even
though many other files use work-arounds to achieve the same result.

By documenting them, hopefully they will become more widely used.

Signed-off-by: Rob Jones <rob.jones@codethink.co.uk>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agoMerge tag 'pm+acpi-3.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael...
Linus Torvalds [Sun, 7 Sep 2014 18:57:27 +0000 (11:57 -0700)]
Merge tag 'pm+acpi-3.17-rc4' of git://git./linux/kernel/git/rafael/linux-pm

Pull ACPI and power management fixes from Rafael Wysocki:
 "These are regression fixes (ACPI sysfs, ACPI video, suspend test),
  ACPI cpuidle deadlock fix, missing runtime validation of ACPI _DSD
  output, a fix and a new CPU ID for the RAPL driver, new blacklist
  entry for the ACPI EC driver and a couple of trivial cleanups
  (intel_pstate and generic PM domains).

  Specifics:

   - Fix for recently broken test_suspend= command line argument (Rafael
     Wysocki).

   - Fixes for regressions related to the ACPI video driver caused by
     switching the default to native backlight handling in 3.16 from
     Hans de Goede.

   - Fix for a sysfs attribute of ACPI device objects that returns stale
     values sometimes due to the fact that they are cached instead of
     executing the appropriate method (_SUN) every time (broken in
     3.14).  From Yasuaki Ishimatsu.

   - Fix for a deadlock between cpuidle_lock and cpu_hotplug.lock in the
     ACPI processor driver from Jiri Kosina.

   - Runtime output validation for the ACPI _DSD device configuration
     object missing from the support for it that has been introduced
     recently.  From Mika Westerberg.

   - Fix for an unuseful and misleading RAPL (Running Average Power
     Limit) domain detection message in the RAPL driver from Jacob Pan.

   - New Intel Haswell CPU ID for the RAPL driver from Jason Baron.

   - New Clevo W350etq blacklist entry for the ACPI EC driver from Lan
     Tianyu.

   - Cleanup for the intel_pstate driver and the core generic PM domains
     code from Gabriele Mazzotta and Geert Uytterhoeven"

* tag 'pm+acpi-3.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / cpuidle: fix deadlock between cpuidle_lock and cpu_hotplug.lock
  ACPI / scan: not cache _SUN value in struct acpi_device_pnp
  cpufreq: intel_pstate: Remove unneeded variable
  powercap / RAPL: change domain detection message
  powercap / RAPL: add support for CPU model 0x3f
  PM / domains: Make generic_pm_domain.name const
  PM / sleep: Fix test_suspend= command line option
  ACPI / EC: Add msi quirk for Clevo W350etq
  ACPI / video: Disable native_backlight on HP ENVY 15 Notebook PC
  ACPI / video: Add a disable_native_backlight quirk
  ACPI / video: Fix use_native_backlight selection logic
  ACPICA: ACPI 5.1: Add support for runtime validation of _DSD package.

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Linus Torvalds [Sun, 7 Sep 2014 17:59:58 +0000 (10:59 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs

Pull filesystem fixes from Al Viro:
 "Several bugfixes (all of them -stable fodder).

  Alexey's one deals with double mutex_lock() in UFS (apparently, nobody
  has tried to test "ufs: sb mutex merge + mutex_destroy" on something
  like file creation/removal on ufs).  Mine deal with two kinds of
  umount bugs, in umount propagation and in handling of automounted
  submounts, both resulting in bogus transient EBUSY from umount"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  ufs: fix deadlocks introduced by sb mutex merge
  fix EBUSY on umount() from MNT_SHRINKABLE
  get rid of propagate_umount() mistakenly treating slaves as busy.

10 years agoMerge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 7 Sep 2014 17:51:42 +0000 (10:51 -0700)]
Merge branch 'core-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull RCU fix from Ingo Molnar:
 "A boot hang fix for the offloaded callback RCU model (RCU_NOCB_CPU=y
  && (TREE_CPU=y || TREE_PREEMPT_RC)) in certain bootup scenarios"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  rcu: Make nocb leader kthreads process pending callbacks after spawning

10 years agoMerge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 7 Sep 2014 17:37:48 +0000 (10:37 -0700)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull timer fixes from Thomas Gleixner:
 "Three fixlets from the timer departement:

   - Update the timekeeper before updating vsyscall and pvclock.  This
     fixes the kvm-clock regression reported by Chris and Paolo.

   - Use the proper irq work interface from NMI.  This fixes the
     regression reported by Catalin and Dave.

   - Clarify the compat_nanosleep error handling mechanism to avoid
     future confusion"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timekeeping: Update timekeeper before updating vsyscall and pvclock
  compat: nanosleep: Clarify error handling
  nohz: Restore NMI safe local irq work for local nohz kick

10 years agoufs: fix deadlocks introduced by sb mutex merge
Alexey Khoroshilov [Tue, 2 Sep 2014 07:40:17 +0000 (11:40 +0400)]
ufs: fix deadlocks introduced by sb mutex merge

Commit 0244756edc4b ("ufs: sb mutex merge + mutex_destroy") introduces
deadlocks in ufs_new_inode() and ufs_free_inode().
Most callers of that functions acqure the mutex by themselves and
ufs_{new,free}_inode() do that via lock_ufs(),
i.e we have an unavoidable double lock.

The patch proposes to resolve the issue by making sure that
ufs_{new,free}_inode() are not called with the mutex held.

Found by Linux Driver Verification project (linuxtesting.org).

Cc: stable@vger.kernel.org # 3.16
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
10 years agoMerge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Linus Torvalds [Sat, 6 Sep 2014 23:42:12 +0000 (16:42 -0700)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:
 "A smattering of bug fixes across most architectures"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  powerpc/kvm/cma: Fix panic introduces by signed shift operation
  KVM: s390/mm: Fix guest storage key corruption in ptep_set_access_flags
  KVM: s390/mm: Fix storage key corruption during swapping
  arm/arm64: KVM: Complete WFI/WFE instructions
  ARM/ARM64: KVM: Nuke Hyp-mode tlbs before enabling MMU
  KVM: s390/mm: try a cow on read only pages for key ops
  KVM: s390: Fix user triggerable bug in dead code

10 years agoMerge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm...
Linus Torvalds [Sat, 6 Sep 2014 19:37:43 +0000 (12:37 -0700)]
Merge tag 'fixes-for-linus' of git://git./linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Kevin Hilman:
 "Another round of fixes from arm-soc land, which are mostly DT fixes
  for:

   - OMAP: handful of DT fixes devices on newly supported hardware
   - davinci: fix 2nd EDMA channel
   - ux500: extend previous pinctrl fix to another board
   - at91: clock registration fixes, compatibility string precision

  And one more fix for event cleanup in drivers/bus/arm-ccn"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  bus: arm-ccn: Move event cleanup routine
  ARM: at91/dt: rm9200: fix usb clock definition
  ARM: at91: rm9200: fix clock registration
  ARM: at91/dt: sam9g20: set at91sam9g20 pllb driver
  ARM: dts: dra7-evm: Add vtt regulator support
  ARM: dts: dra7-evm: Fix spi1 mux documentation
  ARM: dts: am43x-epos-evm: Disable QSPI to prevent conflict with GPMC-NAND
  ARM: OMAP2+: gpmc: Don't complain if wait pin is used without r/w monitoring
  ARM: dts: am43xx-epos-evm: Don't use read/write wait monitoring
  ARM: dts: am437x-gp-evm: Don't use read/write wait monitoring
  ARM: dts: am437x-gp-evm: Use BCH16 ECC scheme instead of BCH8
  ARM: dts: am43x-epos-evm: Use BCH16 ECC scheme instead of BCH8
  ARM: dts: am4372: fix USB regs size
  ARM: dts: am437x-gp: switch i2c0 to 100KHz
  ARM: dts: dra7-evm: Fix 8th NAND partition's name
  ARM: dts: dra7-evm: Fix i2c3 pinmux and frequency
  ARM: ux500: disable msp2 node on Snowball
  ARM: edma: Fix configuration parsing for SoCs with multiple eDMA3 CC
  ARM: dts: set 'ti,set-rate-parent' for dpll4_m5x2 clock