Merge Stephen Rothwell's patches

Don't call a NULL ack function in the generic IRQ code.

Some IRQ controllers don't need an ack function (e.g. OpenPIC on
PPC platforms) and for them we'd rather not have the overhead
of doing an indirect call to a function that does nothing.

Signed-off-by: Paul Mackerras <paulus@samba.org>

powerpc: Fixes to get the merged kernel to boot on powermac.

This merges ppc_ksyms.c, puts back the actual do_execve call in
sys_execve, makes init_MMU call find_end_of_memory rather than
ppc_md.find_end_of_memory (every platform has a device tree
with a /memory node now, right?) and fixes some problems with the
mpic initialization on newworld powermacs.

Signed-off-by: Paul Mackerras <paulus@samba.org>

powerpc: Fix building in the old arch's boot directory for now

Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] ppc32: make cur_cpu_spec a single pointer instead of an array

Changed ppc32 so that cur_cpu_spec is just a single pointer for all CPUs.
Additionally, made call_setup_cpu check to see if the cpu_setup pointer
is NULL or not before calling the function.  This lets remove the dummy
cpu_setup calls that just return.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] powerpc: merged asm/cputable.h

Merged cputable.h between ppc32 and ppc64.  In doing this removed support
for the BEGIN_FTR_SECTION/END_FTR_SECTION macros in C code since they
dont compile correctly.  C code should use cpu_has_feature().  This is
based on Arnd Bergmann's initial patch.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] powerpc: merge byteorder.h

powerpc: Merge byteorder.h

Essentially adopts the 64-bit version of this file.  The 32-bit version had
been using unsigned ints for arguments/return values that were actually
only 16 bits - the new file uses __u16 for these items as in the 64-bit
version of the header.  The order of some of the asm constraints
in the 64-bit version was slightly different than the 32-bit version,
but they produce identical code.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

ppc64 iSeries: use device_node instead of iSeries_Device_node

There needs to be more cleanup after this.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>

powerpc: move more iSeries code

Move the iSeries specific parts of misc.S and ppc_ksyms.c
into powerpc/platforms/iseries.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>

powerpc: Make powerpc pmac 32 bit build again

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>

powerpc: Move viopath.c to powerpc/platforms/iseries

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>

powerpc: Move iSeries_smp.c to powerpc/platforms/iseries

And rename it to smp.c.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>

powerpc: Move iSeries_vio.c to powerpc/platforms/iseries

And rename it to vio.c.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>

powerpc: Move iSeries_VpdInfo.c to powerpc/platforms/iseries

And rename it to vpdinfo.c.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>

powerpc: Move iSeries_irq.c to powerpc/platorms/iseries

And rename it to irq.c.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>

powerpc: Move iSeries_pci.c to powerpc/platform/iseries

and rename it to pci.c.  This also required moving
arch/ppc64/kernel/pci.h into include/asm-powerpc (called
ppc-pci.h.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>

powerpc: Move iSeries_iommu.c to powerpc/platforms/iseries

And rename it to iommu.c

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>

powerpc: Move iSeries_htab.c to powerpc/platforms/iseries

And rename it to htab.c

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>

powerpc: move iSeries_proc.c to powerpc/platforms/iseries

And renamed it to proc.c

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>

powerpc: Merge HvLpEvent.c into lpevents.c

These two files were intimately connected, so just merge them.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>

powerpc: move hvCall.s to powerpc/platforms/iseries

Rename it to hvcall.S and (so I can do that) rename hvcall.c
to hvlog.c - a more appropriate name.

Do some white space cleanups.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>

powerpc: move ItLpQueue.c to powerpc/platforms/iseries

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>

powerpc: move iSeries_setup.[ch] and mf.c into platforms/iseries

iSeries_setup.c becomes setup.c
iSeries_setup.h becomes setup.h
mf.c retains its name

Also moved iSeries_[gs]et_rtc_time and iSeries_get_boot_time into
mf.c since they are just small wrappers around mf_ functions.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>

powerpc: Move LparData.c to powerpc platforms

Also rename it to lpardata.c

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>

powerpc: Move HvLpConfig.c to powerpc arch

Also rename it to hvlpconfig.c

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>

powerpc: Create arch/powerpc/platforms/iseries

I also move arch/ppc64/kernel/HvCall.c to
arch/powerpc/platforms/iseries/hvcall.c.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>

[PATCH] ppc64 g5: merge tree build fix

We removed __pmacdata in the merge.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

ppc64: Fix typo in iommu cleanups that broke pmac build.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

powerpc: clean up after powermac build merge

Complete moving arch/ppc64/kernel/mpic.h,
        include/asm-ppc/reg.h, include/asm-ppc64/kdebug.h
        and include/asm-ppc64/kprobes.h
Add arch/powerpc/platforms/Makefile and use it from
arch/powerpc/Makefile
Introduce OLDARCH temporarily so we can point back to
the originating architecture

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>

Merge refs/heads/devtree from oak/kernels/iseries/work/.git

powerpc: Merge enough to start building in arch/powerpc.

This creates the directory structure under arch/powerpc and a bunch
of Kconfig files.  It does a first-cut merge of arch/powerpc/mm,
arch/powerpc/lib and arch/powerpc/platforms/powermac.  This is enough
to build a 32-bit powermac kernel with ARCH=powerpc.

For now we are getting some unmerged files from arch/ppc/kernel and
arch/ppc/syslib, or arch/ppc64/kernel.  This makes some minor changes
to files in those directories and files outside arch/powerpc.

The boot directory is still not merged.  That's going to be interesting.

Signed-off-by: Paul Mackerras <paulus@samba.org>

Merge from Linus' tree.

[PATCH] powerpc: merge semaphore.h

powerpc: Merge semaphore.h

Adopted the ppc64 version of semaphore.h.  The 32-bit version used
smp_wmb(), but recent updates to atomic.h mean this is no longer required.
The 64-bit version made use of unlikely(), which has been retained in the
combined version.

This patch requires the recent atomic.h patch.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] powerpc: Merge asm-ppc*/rwsem.h

Merge asm-ppc*/rwsem.h into include/asm-powerpc.
Removed smp_*mb() memory barriers from the ppc32 code
as they are now burried in the atomic_*() functions as
suggested by Paul, implemented by Arnd, and pushed out
by Becky.  I am not the droid you are looking for.

This patch depends on Becky's atomic.h merge patch.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] powerpc: merge atomic.h, memory.h

powerpc: Merge atomic.h and memory.h into powerpc

Merged atomic.h into include/powerpc.  Moved asm-style HMT_ defines from
memory.h into ppc_asm.h, where there were already HMT_defines; moved c-style
HMT_ defines to processor.h. Renamed memory.h to synch.h to better reflect
its contents.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Signed-off-by: Jon Loeliger <linuxppc@jdl.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] powerpc: Merge asm-ppc*/seccomp.h, drop TIF_32BIT check

Merge asm-ppc*/seccomp.h. Drop TIF_32BIT check.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] powerpc: Fix building of power3 config on ppc32

The spinlock_types.h merge renamed the structure for raw_spinlock_t to
match ppc64.  In doing so some of the spinlock macros/functions needed to
be updated to match.  Apparently, this seems to only be caught when
building power3.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Merge master.kernel.org:/home/rmk/linux-2.6-ucb

Merge master.kernel.org:/home/rmk/linux-2.6-serial

Merge master.kernel.org:/home/rmk/linux-2.6-arm

[PATCH] Input: check switch bitmap when matching handlers

The wwitch bitmap was added to input_device_id structure and we should
check it when matching handlers and input devices.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[ARM] Fix compiler warnings for memcpy_toio/memcpy_fromio/memset_io

Add 'volatile' to the __iomem pointers for these functions as
per x86.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[MFD] Fix "bious one-bit signed bitfield" errors

ucb1x00-ts declared a couple of one-bit 'int' bitfields.
Make them unsigned.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[SERIAL] Remove unused variable in clps711x.c

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Merge branch 'upstream' from /linux/kernel/git/jgarzik/libata-dev

Merge branch 'upstream-fixes' from /linux/kernel/git/jgarzik/netdev-2.6

[PATCH] skge: fix Yukon-Lite A0 workaround

This is one of those workarounds sucked over from sk98lin driver.
The skge driver needs to detect the Yukon-Lite A0 chip properly,
and turn of Rx FIFO Flush.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

Merge /spare/repo/linux-2.6/

Merge master.kernel.org:/home/rmk/linux-2.6-arm

[ARM] Fix context switch with ARMv6 + TLS

We accidentally corrupted the TLS value when clearing out the ARMv6
exclusive monitor.  Avoid doing so.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[PATCH] revert oversized kmalloc check

As davem points out, this wasn't such a great idea.  There may be some code
which does:

size = 1024*1024;
while (kmalloc(size, ...) == 0)
size /= 2;

which will now explode.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Christoph Lameter <christoph@lameter.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] documentation: sparse no longer uses bk, but git

Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ipmi_msghandler: inconsistent spin_lock usage

I found an inconsistent spin_lock usage in ipmi_smi_msg_received.

Signed-off-by: Hironobu Ishii <hishii@soft.fujitsu.com>
Cc: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc64: Fix huge pages MMU mapping bug

Current kernel has a couple of sneaky bugs in the ppc64 hugetlb code that
cause huge pages to be potentially left stale in the hash table and TLBs
(improperly invalidated), with all the nasty consequences that can have.

One is that we forgot to set the "secondary" bit in the hash PTEs when
hashing a huge page in the secondary bucket (fortunately very rare).

The other one is on non-LPAR machines (like Apple G5s), flush_hash_range()
which is used to flush a batch of PTEs simply did not work for huge pages.
Historically, our huge page code didn't batch, but this was changed without
fixing this routine.  This patch fixes both.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] atyfb c99 fix

- fix this:

  drivers/video/aty/xlinit.c: In function `atyfb_xl_init':
  drivers/video/aty/xlinit.c:256: warning: ISO C90 forbids mixed declarations and code

- repair some kooky coding style

- Use ARRAY_SIZE()

Cc: Tom 'spot' Callaway <tcallawa@redhat.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] hisax: remove URB_ASYNC_UNLINK

usb_unlink_urb is always async now, so URB_ASYNC_UNLINK was removed from
core USB and we must do as well.

Signed-off-by: Karsten Keil <kkeil@suse.de>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Make sure SIGKILL gets proper respect

Bhavesh P. Davda <bhavesh@avaya.com> noticed that SIGKILL wouldn't
properly kill a process under just the right cicumstances: a stopped
task that already had another signal queued would get the SIGKILL
queued onto the shared queue, and there it would remain until SIGCONT.

This simplifies the signal acceptance logic, and fixes the bug in the
process.

Losely based on an earlier patch by Bhavesh.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] cifs: Add support for suspend

cifsd had been preventing software suspend from completing.

Signed-off-by: pavel@suse.de
Signed-off-by: Steve French <sfrench@us.ibm.com> lightly modified
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] pci: fixup parent subordinate busnr

I believe the change that broke things is introduction of
pci_fixup_parent_subordinate_busnr().

The patch here does two things:
- hunk #1 should fix the problems you've seen when you boot without
  additional "pci" kernel options;
- hunk #2 supposedly fixes boot with "pci=assign-busses" option which
  otherwise hangs Acer TM81xx machines as reported.

Please try this with and without "pci=assign-busses". If it boots,
I'd like to see 'lspci -vvx' for both cases.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Merge branch 'for-linus' of /linux/kernel/git/shaggy/jfs-2.6

[PATCH] 8390 Tx fix for non i386 machines

While this is true, E8390_CMD is zero on i386, and thus there should be no
effect for these machines.  Machines like Mac, Amiga etc. which use Alan's
clever register mapping may have a non-zero E8390_CMD and result in bogus
"transmitter busy" type messages from this bug.

Fixes BUG# 3991.

[SCTP]: Fix SCTP_SHUTDOWN notifications.

Fix to allow SCTP_SHUTDOWN notifications to be received on 1-1 style
SCTP SOCK_STREAM sockets.

Add SCTP_SHUTDOWN notification to the receive queue before updating
the state of the association.

Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER] Fix conntrack event cache deadlock/oops

This patch fixes a number of bugs.  It cannot be reasonably split up in
multiple fixes, since all bugs interact with each other and affect the same
function:

Bug #1:
The event cache code cannot be called while a lock is held.  Therefore, the
call to ip_conntrack_event_cache() within ip_ct_refresh_acct() needs to be
moved outside of the locked section.  This fixes a number of 2.6.14-rcX
oops and deadlock reports.

Bug #2:
We used to call ct_add_counters() for unconfirmed connections without
holding a lock.  Since the add operations are not atomic, we could race
with another CPU.

Bug #3:
ip_ct_refresh_acct() lost REFRESH events in some cases where refresh
(and the corresponding event) are desired, but no accounting shall be
performed.  Both, evenst and accounting implicitly depended on the skb
parameter bein non-null.   We now re-introduce a non-accounting
"ip_ct_refresh()" variant to explicitly state the desired behaviour.

Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER] remove unneeded structure definition from conntrack helper

Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER] Fix sparse endian warnings in pptp helper

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETFILTER] fix DEBUG statement in PPTP helper

As noted by Alexey Dobriyan, the DEBUGP statement prints the wrong
callID.

Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[BRIDGE]: TSO fix in br_dev_queue_push_xmit

Signed-off-by: Vlad Drukker <vlad@storewiz.com>
Acked-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[TCP]: Adjust Reno SACK estimate in tcp_fragment

Since the introduction of TSO pcount a year ago, it has been possible
for tcp_fragment() to cause packets_out to decrease.  Prior to that,
tcp_retrans_try_collapse() was the only way for that to happen on the
retransmission path.

When this happens with Reno, it is possible for sasked_out to become
invalid because it is only an estimate and not tied to any particular
packet on the retransmission queue.

Therefore we need to adjust sacked_out as well as left_out in the Reno
case.  The following patch does exactly that.

This bug is pretty difficult to trigger in practice though since you
need a SACKless peer with a retransmission that occurs just as the
cached MTU value expires.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[PATCH] Add dm-snapshot tutorial in Documentation

I've recently discovered the real functionality of device-mapper snapshots,
and since they are not well known, I've decided to write some docs for
them.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] NFS: fix client oops when debugging is on

nfs_readpage_release() causes an oops while accessing a file with NFS
debugging turned on (echo 32767 > /proc/sys/sunrpc/nfs_debug) and a kernel
built with CONFIG_DEBUG_SLAB.

This patch moves the debugging statement above nfs_release_request() to
avoid accessing freed memory.

Signed-off-by: Nick Wilson <njw@osdl.org>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Fix bd_claim() error code.

Problem: In some circumstances, bd_claim() is returning the wrong error
code.

If we try to swapon an unused block device that isn't swap formatted, we
get -EINVAL.  But if that same block device is already mounted, we instead
get -EBUSY, even though it still isn't a valid swap device.

This issue came up on the busybox list trying to get the error message
from "swapon -a" right.  If a swap device is already enabled, we get -EBUSY,
and we shouldn't report this as an error.  But we can't distinguish the two
-EBUSY conditions, which are very different errors.

In the code, bd_claim() returns either 0 or -EBUSY, but in this case busy
means "somebody other than sys_swapon has already claimed this", and
_that_ means this block device can't be a valid swap device.  So return
-EINVAL there.

Signed-off-by: Rob Landley <rob@landley.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ext3: EXT3_DEBUG build fixes

Fix some warnings and a build error when EXT3_DEBUG is enabled.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] oss: don't concatenate __FUNCTION__ with strings

It's deprecated. Use "%s", __FUNCTION__ instead.

Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Maximilian Attems <janitor@sternwelten.at>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] xtensa: remove io_remap_page_range and minor clean-ups

Remove io_remap_page_range() from all of Linux 2.6.x (as requested and
suggested by Randy Dunlap) and minor clean-ups.

Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: replace printk with "stack-friendly" printf - to report console failure

User get *a lot* confused when consoles don't work but we don't report
anything.  And, as reported in the comment, using printk to report "your
console doesn't work" isn't likely to go that far.

Fix the problem on the base of this: stack consumption by host printf().  Use
kernel sprintf() and os_write_file, using a wild guess that one page will be
enough for the message, to preallocate the buffer with kmalloc().

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: use GFP_ATOMIC for allocations under spinlocks.

setup_initial_poll is only called with sigio_lock() held, so use appropriate
allocation.

Also, parse_chan() can also be called when holding a spinlock (see line_open()
 -> parse_chan_pair()).

I have sporadic problems (spinlock taken twice, with spinlock debugging on UP)
which could be caused by a sequence like "take spinlock, alloc and go to
sleep, take again the spinlock in the other thread".

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: Fix GFP_ flags usage

GFP_ATOMIC | GFP_KERNEL is meaningless and won't work.  Actually it never
worked, even in 2.4.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: avoid fixing faults while atomic

Following i386, we should maybe refuse trying to fault in pages when we're
doing atomic operations, because to handle the fault we could need to take
already taken spinlocks.

Also, if we're doing an atomic operation (in the sense of in_atomic()) we're
surely in kernel mode and we're surely going to handle adequately the failed
fault, so it's safe to behave this way.

Currently, on UML SMP is rarely used, and we don't support PREEMPT, so this is
unlikely to create problems right now, but it might in the future.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: run mconsole "sysrq" in process context

Things are breaking horribly with sysrq called in interrupt context.  I want
to try to fix it, but probably this is simpler.  To tell the truth, sysrq is
normally run in interrupt context, so there shouldn't be any problem.

There's also a warning from the fault handler because it's run in atomic
context (I have a patch for that, only I deferred it).  This is why I'm doing
this.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: fix condition in tlb flush

Avoid setting w = 0 twice.  Spotted this (trivial) thing which is needed for
another patch.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: fix hang in TT mode on fault

The current code doesn't handle well general protection faults on the host -
it thinks that cr2 is always the address of a page fault.  While actually, on
general protection faults, that address is not accessible, so we'd better
assume we couldn't satisfy the fault.  Currently instead we think we've fixed
it, so we go back, retry the instruction and fault again endlessly.

This leads to the kernel hanging when doing copy_from_user(dest, -1, ...) in
TT mode, since reading *(-1) causes a GFP, and we don't support kernel
preemption.

Thanks to Luo Xin for testing UML with LTP and reporting the failures he got.

Cc: Luo Xin <luothing@sina.com>
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: don't redundantly mark pte as newpage in pte_modify

pte_modify marks a page as needing flush, which is redundant because the
resulting PTE is still set with set_pte, which already handles that.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] strlcat: use for uml umid.c

Simplify the code by using strlcat() instead of strncat() and manual
appending.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] uml: don't remove umid files in conflict case

Only remove the UML pidfile and management socket if we created them.
Currently in case two UMLs are started with the same umid, the second will
remove the first's ones.

Probably we should also panic() at that point, not sure however.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] swsusp: fix comments

Fix comments in swsusp.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] __kmalloc: Generate BUG if size requested is too large.

I had an issue on ia64 where I got a bug in kernel/workqueue because
kzalloc returned a NULL pointer due to the task structure getting too big
for the slab allocator.  Usually these cases are caught by the kmalloc
macro in include/linux/slab.h.

Compilation will fail if a too big value is passed to kmalloc.

However, kzalloc uses __kmalloc which has no check for that.  This patch
makes __kmalloc bug if a too large entity is requested.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] mesh scsi: fix error handling

The PowerMac mesh SCSI driver had some missing error handling which would
trigger warnings due to lack of handling of return value from
scsi_add_host.  This fixes it.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: James Bottomley <James.Bottomley@SteelEye.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] atiixp_modem printk fixes

Correctly identify atiixp_modem in its error messages.

Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com>
Cc: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] corrections to top-level README

Corrections to the recent top-level README changes.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc64: SMU driver update & i2c support

The SMU is the "system controller" chip used by Apple recent G5 machines
including the iMac G5.  It drives things like fans, i2c busses, real time
clock, etc...

The current kernel contains a very crude driver that doesn't do much more
than reading the real time clock synchronously.  This is a completely
rewritten driver that provides interrupt based command queuing, a userland
interface, and an i2c/smbus driver for accessing the devices hanging off
the SMU i2c busses like temperature sensors.  This driver is a basic block
for upcoming work on thermal control for those machines, among others.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc64: Fix 64bit ptrace DABR support

Fix my stupid bug in the 64bit version of PTRACE_SET_DEBUGREG.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc64: Fix build with iommu debug enabled

Fix build when iommu debug is enabled.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc64: Fix LPAR regression

The recent iommu fix broke booting on some POWER4 and POWER5 LPAR boxes.

It looks like we have been calling the non LPAR iommu_dev_setup on LPAR
machines for a while. The recent iommu fix caused that code path to
fail.

It looks like we just need to hook up the devices iommu_table to the
parents one, so do that instead of calling iommu_dev_setup_pSeries and
crossing the streams.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ext3: ext3_show_options fix

EXT3_MOUNT_DATA_FLAGS is not a boolean. This fixes it.

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] slab: fix handling of pages from foreign NUMA nodes

The numa slab allocator may allocate pages from foreign nodes onto the
lists for a particular node if a node runs out of memory.  Inspecting the
slab->nodeid field will not reflect that the page is now in use for the
slabs of another node.

This patch fixes that issue by adding a node field to free_block so that
the caller can indicate which node currently uses a slab.

Also removes the check for the current node from kmalloc_cache_node since
the process may shift later to another node which may lead to an allocation
on another node than intended.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] swsusp: do not trigger BUG_ON() if there is not enough memory

The following patch makes swsusp avoid triggering the BUG_ON() in
swsusp_suspend() if there is not enough memory for suspend.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] hdaps: small update.

- Handle dmi_system_check() elegantly, now that my bugfix is upstream.

- Add support for the X41 and R52.

- Cleanup some comments do I do not have to keep updating them with each
  new whitelisted laptop.

Signed-off-by: Robert Love <rml@novell.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Fix mmap() of /dev/hpet

The address passed to io_remap_pfn_range() in hpet_mmap() does not need to
be converted using __pa(): it is already a physical address.  This bug was
found and the patch suggested by Clay Harris.

I introduced this particular bug when making io_remap_pfn_range changes a
few months ago.  In fact mmap()ing /dev/hpet has *never* previously worked:
before my changes __pa() was being executed on an ioremap()ed virtual
address, which is also invalid.

Signed-off-by: Keir Fraser <keir@xensource.com>
Cc: Robert Picco <Robert.Picco@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] slab: alpha inlining fix

It is essential that index_of() be inlined.  But alpha undoes the gcc
inlining hackery and index_of() ends up out-of-line.  So fiddle with things
to make that function inline again.

Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] alpha: fix kernel panic during SysRq-b

acquire_console_sem() does BUG() in interrupt context now, as in the case
of SysRq-b.

Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>