GitHub/exynos8895/android_kernel_samsung_universal8895.git
16 years ago[patch for 2.6.26 1/4] vfs: utimensat(): ignore tv_sec if tv_nsec == UTIME_OMIT or...
Michael Kerrisk [Tue, 10 Jun 2008 04:16:05 +0000 (21:16 -0700)]
[patch for 2.6.26 1/4] vfs: utimensat(): ignore tv_sec if tv_nsec == UTIME_OMIT or UTIME_NOW

The POSIX.1 draft spec for utimensat() says that if a times[n].tv_nsec
field is UTIME_OMIT or UTIME_NOW, then the value in the corresponding
tv_sec field is ignored.  See the last sentence of this para, from
the spec:

    If the tv_nsec field of a timespec structure has
    the special value UTIME_NOW, the file's relevant
    timestamp shall be set to the greatest value
    supported by the file system that is not greater than
    the current time. If the tv_nsec field has the
    special value UTIME_OMIT, the file's relevant
    timestamp shall not be changed. In either case,
    the tv_sec field shall be ignored.

However the current Linux implementation requires the tv_sec value to be
zero (or the EINVAL error results). This requirement should be removed.

Acked-by: Miklos Szeredi <miklos@szeredi.hu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ulrich Drepper <drepper@redhat.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
16 years ago[patch for 2.6.26 2/4] vfs: utimensat(): be consistent with utime() for immutable...
Michael Kerrisk [Tue, 10 Jun 2008 04:16:07 +0000 (21:16 -0700)]
[patch for 2.6.26 2/4] vfs: utimensat(): be consistent with utime() for immutable and append-only files

This patch fixes utimensat() to make its behavior consistent
with that of utime()/utimes() when dealing with files marked
immutable and append-only.

The current utimensat() implementation also returns EPERM if
'times' is non-NULL and the tv_nsec fields are both UTIME_NOW.
For consistency, the

(times != NULL && times[0].tv_nsec == UTIME_NOW &&
                  times[1].tv_nsec == UTIME_NOW)

case should be treated like the traditional utimes() case where
'times' is NULL.  That is, the call should succeed for a file
marked append-only and should give the error EACCES if the file
is marked as immutable.

The simple way to do this is to set 'times' to NULL
if (times[0].tv_nsec == UTIME_NOW && times[1].tv_nsec == UTIME_NOW).

This is also the natural approach, since POSIX.1 semantics consider the
times == {{x, UTIME_NOW}, {y, UTIME_NOW}}
to be exactly equivalent to the case for
times == NULL.

(Thanks to Miklos for pointing this out.)

Patch 3 in this series relies on the simplification provided
by this patch.

Acked-by: Miklos Szeredi <miklos@szeredi.hu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ulrich Drepper <drepper@redhat.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
16 years ago[PATCH] fix cgroup-inflicted breakage in block_dev.c
Al Viro [Mon, 23 Jun 2008 12:30:55 +0000 (08:30 -0400)]
[PATCH] fix cgroup-inflicted breakage in block_dev.c

devcgroup_inode_permission() expects MAY_FOO, not FMODE_FOO; kindly
keep your misdesign consistent if you positively have to inflict it
on the kernel.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
16 years agoSlab: Fix memory leak in fallback_alloc()
Christoph Lameter [Sat, 21 Jun 2008 23:46:35 +0000 (16:46 -0700)]
Slab: Fix memory leak in fallback_alloc()

The zonelist patches caused the loop that checks for available
objects in permitted zones to not terminate immediately. One object
per zone per allocation may be allocated and then abandoned.

Break the loop when we have successfully allocated one object.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Linus Torvalds [Sat, 21 Jun 2008 23:43:56 +0000 (16:43 -0700)]
Merge branch 'for_linus' of git://git./linux/kernel/git/tytso/ext4

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  Ext4: Fix online resize block group descriptor corruption

16 years agoMerge branch 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6
Linus Torvalds [Sat, 21 Jun 2008 19:31:02 +0000 (12:31 -0700)]
Merge branch 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6

* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6:
  hwmon: (lm75) sensor reading bugfix
  hwmon: (abituguru3) update driver detection
  hwmon: (w83791d) new maintainer
  hwmon: (abituguru3) Identify Abit AW8D board as such
  hwmon: Update the sysfs interface documentation
  hwmon: (adt7473) Initialize max_duty_at_overheat before use
  hwmon: (lm85) Fix function RANGE_TO_REG()

16 years agoAdd return value to reserve_bootmem_node()
Bernhard Walle [Sat, 21 Jun 2008 17:01:02 +0000 (19:01 +0200)]
Add return value to reserve_bootmem_node()

This patch changes the function reserve_bootmem_node() from void to int,
returning -ENOMEM if the allocation fails.

This fixes a build problem on x86 with CONFIG_KEXEC=y and
CONFIG_NEED_MULTIPLE_NODES=y

Signed-off-by: Bernhard Walle <bwalle@suse.de>
Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Sat, 21 Jun 2008 15:44:08 +0000 (08:44 -0700)]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  netns: Don't receive new packets in a dead network namespace.
  sctp: Make sure N * sizeof(union sctp_addr) does not overflow.
  pppoe: warning fix
  ipv6: Drop packets for loopback address from outside of the box.
  ipv6: Remove options header when setsockopt's optlen is 0
  mac80211: detect driver tx bugs

16 years agonetns: Don't receive new packets in a dead network namespace.
Eric W. Biederman [Sat, 21 Jun 2008 05:16:51 +0000 (22:16 -0700)]
netns: Don't receive new packets in a dead network namespace.

Alexey Dobriyan <adobriyan@gmail.com> writes:
> Subject: ICMP sockets destruction vs ICMP packets oops

> After icmp_sk_exit() nuked ICMP sockets, we get an interrupt.
> icmp_reply() wants ICMP socket.
>
> Steps to reproduce:
>
>  launch shell in new netns
>  move real NIC to netns
>  setup routing
>  ping -i 0
>  exit from shell
>
> BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
> IP: [<ffffffff803fce17>] icmp_sk+0x17/0x30
> PGD 17f3cd067 PUD 17f3ce067 PMD 0
> Oops: 0000 [1] PREEMPT SMP DEBUG_PAGEALLOC
> CPU 0
> Modules linked in: usblp usbcore
> Pid: 0, comm: swapper Not tainted 2.6.26-rc6-netns-ct #4
> RIP: 0010:[<ffffffff803fce17>]  [<ffffffff803fce17>] icmp_sk+0x17/0x30
> RSP: 0018:ffffffff8057fc30  EFLAGS: 00010286
> RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff81017c7db900
> RDX: 0000000000000034 RSI: ffff81017c7db900 RDI: ffff81017dc41800
> RBP: ffffffff8057fc40 R08: 0000000000000001 R09: 000000000000a815
> R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff8057fd28
> R13: ffffffff8057fd00 R14: ffff81017c7db938 R15: ffff81017dc41800
> FS:  0000000000000000(0000) GS:ffffffff80525000(0000) knlGS:0000000000000000
> CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
> CR2: 0000000000000000 CR3: 000000017fcda000 CR4: 00000000000006e0
> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> Process swapper (pid: 0, threadinfo ffffffff8053a000, task ffffffff804fa4a0)
> Stack:  0000000000000000 ffff81017c7db900 ffffffff8057fcf0 ffffffff803fcfe4
>  ffffffff804faa38 0000000000000246 0000000000005a40 0000000000000246
>  000000000001ffff ffff81017dd68dc0 0000000000005a40 0000000055342436
> Call Trace:
>  <IRQ>  [<ffffffff803fcfe4>] icmp_reply+0x44/0x1e0
>  [<ffffffff803d3a0a>] ? ip_route_input+0x23a/0x1360
>  [<ffffffff803fd645>] icmp_echo+0x65/0x70
>  [<ffffffff803fd300>] icmp_rcv+0x180/0x1b0
>  [<ffffffff803d6d84>] ip_local_deliver+0xf4/0x1f0
>  [<ffffffff803d71bb>] ip_rcv+0x33b/0x650
>  [<ffffffff803bb16a>] netif_receive_skb+0x27a/0x340
>  [<ffffffff803be57d>] process_backlog+0x9d/0x100
>  [<ffffffff803bdd4d>] net_rx_action+0x18d/0x250
>  [<ffffffff80237be5>] __do_softirq+0x75/0x100
>  [<ffffffff8020c97c>] call_softirq+0x1c/0x30
>  [<ffffffff8020f085>] do_softirq+0x65/0xa0
>  [<ffffffff80237af7>] irq_exit+0x97/0xa0
>  [<ffffffff8020f198>] do_IRQ+0xa8/0x130
>  [<ffffffff80212ee0>] ? mwait_idle+0x0/0x60
>  [<ffffffff8020bc46>] ret_from_intr+0x0/0xf
>  <EOI>  [<ffffffff80212f2c>] ? mwait_idle+0x4c/0x60
>  [<ffffffff80212f23>] ? mwait_idle+0x43/0x60
>  [<ffffffff8020a217>] ? cpu_idle+0x57/0xa0
>  [<ffffffff8040f380>] ? rest_init+0x70/0x80
> Code: 10 5b 41 5c 41 5d 41 5e c9 c3 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 53
> 48 83 ec 08 48 8b 9f 78 01 00 00 e8 2b c7 f1 ff 89 c0 <48> 8b 04 c3 48 83 c4 08
> 5b c9 c3 66 66 66 66 66 2e 0f 1f 84 00
> RIP  [<ffffffff803fce17>] icmp_sk+0x17/0x30
>  RSP <ffffffff8057fc30>
> CR2: 0000000000000000
> ---[ end trace ea161157b76b33e8 ]---
> Kernel panic - not syncing: Aiee, killing interrupt handler!

Receiving packets while we are cleaning up a network namespace is a
racy proposition. It is possible when the packet arrives that we have
removed some but not all of the state we need to fully process it.  We
have the choice of either playing wack-a-mole with the cleanup routines
or simply dropping packets when we don't have a network namespace to
handle them.

Since the check looks inexpensive in netif_receive_skb let's just
drop the incoming packets.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agosctp: Make sure N * sizeof(union sctp_addr) does not overflow.
David S. Miller [Sat, 21 Jun 2008 05:04:34 +0000 (22:04 -0700)]
sctp: Make sure N * sizeof(union sctp_addr) does not overflow.

As noticed by Gabriel Campana, the kmalloc() length arg
passed in by sctp_getsockopt_local_addrs_old() can overflow
if ->addr_num is large enough.

Therefore, enforce an appropriate limit.

Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agopppoe: warning fix
Stephen Hemminger [Sat, 21 Jun 2008 04:58:02 +0000 (21:58 -0700)]
pppoe: warning fix

Fix warning:
drivers/net/pppoe.c: In function 'pppoe_recvmsg':
drivers/net/pppoe.c:945: warning: comparison of distinct pointer types lacks a cast
because skb->len is unsigned int and total_len is size_t

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
Linus Torvalds [Sat, 21 Jun 2008 00:10:04 +0000 (17:10 -0700)]
Merge branch 'release' of git://git./linux/kernel/git/aegl/linux-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] SN2: security hole in sn2_ptc_proc_write

16 years agoalpha: resurrect Cypress IDE quirk
Ivan Kokshaysky [Fri, 20 Jun 2008 23:28:54 +0000 (03:28 +0400)]
alpha: resurrect Cypress IDE quirk

Which was removed in the hope that generic legacy IDE quirk in
drivers/pci/probe.c is sufficient for Cypress IDE.
It isn't, as this controller has non-standard BAR layout:
secondary channel registers are in the BAR0-1 of the second
PCI function - not in the BAR2-3 of the same function, as the
generic quirk routine assumes.

Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoalpha: fix compile failures with gcc-4.3 (bug #10438)
Ivan Kokshaysky [Fri, 20 Jun 2008 23:28:31 +0000 (03:28 +0400)]
alpha: fix compile failures with gcc-4.3 (bug #10438)

Vast majority of these build failures are gcc-4.3 warnings
about static functions and objects being referenced from
non-static (read: "extern inline") functions, in conjunction
with our -Werror.

We cannot just convert "extern inline" to "static inline",
as people keep suggesting all the time, because "extern inline"
logic is crucial for generic kernel build.
So
- just make sure that all callees of critical "extern inline"
  functions are also "extern inline";
- use "static inline", wherever it's possible.

traps.c: work around gcc-4.3 being too smart about array
bounds-checking.

TODO: add "gnu_inline" attribute to all our "extern inline"
functions to ensure desired behaviour with future compilers.

Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoalpha: link failure fix
Ivan Kokshaysky [Fri, 20 Jun 2008 23:26:21 +0000 (03:26 +0400)]
alpha: link failure fix

With built-in scsi disk driver, the final link fails with a following
error:
`.exit.text' referenced in section `.rodata' of drivers/built-in.o:
defined in discarded section `.exit.text' of drivers/built-in.o

This happens with -Os (CONFIG_CC_OPTIMIZE_FOR_SIZE=y) with all gcc-4
versions, and also with -O2 and gcc-4.3.

The problem is in sd.c:sd_major() being inlined into __exit function
exit_sd(), and the compiler generating a jump table in .rodata section
for the 'switch' statement in sd_major(). So we have references to
discarded section.

Fixed with a big hammer in the form of -fno-jump-tables.

Note that jump tables vs. discarded sections is a generic problem,
other architectures are just lucky not to suffer from it. But with
a slightly more complex switch/case statement it can be reproduced
on x86 as well. So maybe at some point we should consider
-fno-jump-tables as a generic compile option...

Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoalpha: fix module load failures on smp (bug #10926)
Ivan Kokshaysky [Fri, 20 Jun 2008 23:25:39 +0000 (03:25 +0400)]
alpha: fix module load failures on smp (bug #10926)

To calculate addresses of locally defined variables, GCC uses 32-bit
displacement from the GP. Which doesn't work for per cpu variables in
modules, as an offset to the kernel per cpu area is way above 4G.

The workaround is to force allocation of a GOT entry for per cpu variable
using ldq instruction with a 'literal' relocation.
I had to use custom asm/percpu.h, as a required argument magic doesn't
work with asm-generic/percpu.h macros.

Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoLinux 2.6.26-rc7
Linus Torvalds [Fri, 20 Jun 2008 23:19:44 +0000 (16:19 -0700)]
Linux 2.6.26-rc7

16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
Linus Torvalds [Fri, 20 Jun 2008 19:46:47 +0000 (12:46 -0700)]
Merge git://git./linux/kernel/git/bart/ide-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  BAST: Remove old IDE driver
  pcmcia ide kingston compactflash's have a new manufacturer id
  pcmcia: add another pata/ide ID
  pcmcia: add an pata/ide ID
  ide: increase timeout in wait_drive_not_busy()
  palm_bk3710: fix resource management

16 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394...
Linus Torvalds [Fri, 20 Jun 2008 19:41:10 +0000 (12:41 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/ieee1394/linux1394-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  ieee1394: Kconfig menu touch-up
  firewire: Kconfig menu touch-up
  firewire: deadline for PHY config transmission
  firewire: fw-ohci: unify printk prefixes
  firewire: fill_bus_reset_event needs lock protection
  firewire: fw-ohci: write selfIDBufferPtr before LinkControl.rcvSelfID
  firewire: fw-ohci: disable PHY packet reception into AR context
  firewire: fw-ohci: use of uninitialized data in AR handler
  firewire: don't panic on invalid AR request buffer

16 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux...
Linus Torvalds [Fri, 20 Jun 2008 19:39:12 +0000 (12:39 -0700)]
Merge branch 'release' of git://git./linux/kernel/git/lenb/linux-acpi-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI: no AC status notification
  ACPI Exception (video-1721): UNKNOWN_STATUS_CODE, Cant attach device

16 years agoMerge branch 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
Linus Torvalds [Fri, 20 Jun 2008 19:38:18 +0000 (12:38 -0700)]
Merge branch 'drm-patches' of git://git./linux/kernel/git/airlied/drm-2.6

* 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (21 commits)
  drm: only trust core drm ioctls - driver ioctls are a mess.
  drm/i915: add support for Intel series 4 chipsets.
  drm/radeon: add hier-z registers for r300 and r500 chipsets
  drm/radeon: use DSTCACHE_CTLSTAT rather than RB2D_DSTCACHE_CTLSTAT
  drm/radeon: switch IGP gart to use radeon_write_agp_base()
  drm/radeon: Restore sw interrupt on resume
  drm/r500: add support for AGP based cards.
  drm/radeon: fix texture uploads with large 3d textures (bug 13980)
  drm/radeon: add initial r500 support.
  drm/radeon: init pipe setup in kernel code.
  drm/radeon: fixup radeon_do_engine_reset
  drm/radeon: fix pixcache and purge/cache flushing registers
  drm/radeon: write AGP_BASE_2 on chips that support it.
  drm/radeon: merge IGP chip setup and fixup RS400 vs RS480 support
  drm/radeon: IGP clean up register and magic numbers.
  drm/rs690: set base 2 to 0.
  drm/rs690: set all of gart base address.
  radeon: add production microcode from AMD
  drm: pcigart use proper pci map interfaces.
  drm: the sg alloc ioctl should write back the handle to userspace
  ...

16 years agoMerge branch 'agp-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
Linus Torvalds [Fri, 20 Jun 2008 19:37:55 +0000 (12:37 -0700)]
Merge branch 'agp-patches' of git://git./linux/kernel/git/airlied/agp-2.6

* 'agp-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6:
  [agp]: fixup chipset flush for new Intel G4x.
  agp: brown paper bag patch - put back the two lines it took out.

16 years agoMerge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 20 Jun 2008 19:37:13 +0000 (12:37 -0700)]
Merge branch 'core-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  softlockup: fix NMI hangs due to lock race - 2.6.26-rc regression
  rcupreempt: remove export of rcu_batches_completed_bh
  cpuset: limit the input of cpuset.sched_relax_domain_level

16 years agoMerge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 20 Jun 2008 19:36:55 +0000 (12:36 -0700)]
Merge branch 'sched-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched, delay accounting: fix incorrect delay time when constantly waiting on runqueue
  sched: CPU hotplug events must not destroy scheduler domains created by the cpusets
  sched: rt-group: fix RR buglet
  sched: rt-group: heirarchy aware throttle
  sched: rt-group: fix hierarchy
  sched: NULL pointer dereference while setting sched_rt_period_us
  sched: fix defined-but-unused warning

16 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Fri, 20 Jun 2008 19:36:38 +0000 (12:36 -0700)]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, geode: add a VSA2 ID for General Software
  x86: use BOOTMEM_EXCLUSIVE on 32-bit
  x86, 32-bit: fix boot failure on TSC-less processors
  x86: fix NULL pointer deref in __switch_to
  x86: set PAE PHYSICAL_MASK_SHIFT to 44 bits.

16 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney...
Linus Torvalds [Fri, 20 Jun 2008 19:34:43 +0000 (12:34 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/cooloney/blackfin-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6:
  Blackfin Serial Driver: Use timer to poll CTS PIN instead of workqueue.
  Blackfin arch: fix typo error in bf548 serial header file

16 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzi...
Linus Torvalds [Fri, 20 Jun 2008 19:31:03 +0000 (12:31 -0700)]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  ahci: sis can't do PMP
  ata_piix: add TECRA M4 to broken suspend list
  LIBATA: Add HAVE_PATA_PLATFORM to select PATA_PLATFORM driver
  sata_mv: warn on PIO with multiple DRQs
  sata_mv: enable async_notify for 60x1 Rev.C0 and higher
  libata: don't check whether to use DMA or not for no data commands
  ahci: jmb361 has only one port

16 years ago[watchdog] hpwdt: fix use of inline assembly
Linus Torvalds [Fri, 20 Jun 2008 19:19:28 +0000 (12:19 -0700)]
[watchdog] hpwdt: fix use of inline assembly

The inline assembly in drivers/watchdog/hpwdt.c was incredibly broken,
and included all the function prologue and epilogue stuff, even though
it was itself then inside a C function where the compiler would add its
own prologue and epilogue on top of it all.

This then just _happened_ to work if you had exactly the right compiler
version and exactly the right compiler flags, so that gcc just happened
to not create any prologue at all (the gcc-generated epilogue wouldn't
matter, since it would never be reached).

But the more proper way to fix it is to simply not do this.  Move the
inline asm to the top level, with no surrounding function at all (the
better alternative would be to remove the prologue and make it actually
use proper description of the arguments to the inline asm, but that's a
bigger change than the one I'm willing to make right now).

Tested-by: S.Çağlar Onur <caglar@pardus.org.tr>
Acked-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years ago[IA64] SN2: security hole in sn2_ptc_proc_write
Cliff Wickman [Fri, 20 Jun 2008 19:02:00 +0000 (12:02 -0700)]
[IA64] SN2: security hole in sn2_ptc_proc_write

Security hole in sn2_ptc_proc_write

It is possible to overrun a buffer with a write to this /proc file.

Signed-off-by: Cliff Wickman <cpw@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
16 years agoBAST: Remove old IDE driver
Ben Dooks [Fri, 20 Jun 2008 18:53:35 +0000 (20:53 +0200)]
BAST: Remove old IDE driver

Remove the old BAST IDE driver, as we are now using the platform-pata
support.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agopcmcia ide kingston compactflash's have a new manufacturer id
Christophe Niclaes [Fri, 20 Jun 2008 18:53:34 +0000 (20:53 +0200)]
pcmcia ide kingston compactflash's have a new manufacturer id

Up to now, Kingston compactflash cards (ab)used the Toshiba Manufacturer's ID,
In their new CF cards, they use a new one.  Let's the ide subsystem
recognize CF cards with the new id.

Signed-off-by: Christophe Niclaes <cniclaes@develtech.com>
Acked-by: Philippe De Muyter <phdm@macqel.be>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agopcmcia: add another pata/ide ID
Kristoffer Ericson [Fri, 20 Jun 2008 18:53:34 +0000 (20:53 +0200)]
pcmcia: add another pata/ide ID

Addition of Transcend 1GB 45x id so that it is properly detected.

[bart: fix typo in ide-cs's ID spotted by Alan Cox]

Signed-off-by: William Peters <w1ll14@gmail.com>
Signed-off-by: Kristoffer Ericson <Kristoffer_e1@hotmail.com>
CC: Alan Cox <alan@lxorguk.ukuu.org.uk>
CC: linux-ide@vger.kernel.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agopcmcia: add an pata/ide ID
Matt Reimer [Fri, 20 Jun 2008 18:53:34 +0000 (20:53 +0200)]
pcmcia: add an pata/ide ID

Add an id for:

product info: "M-Systems", "CF300", ""
manfid: 0x000a, 0x0000
function: 4 (fixed disk)

Signed-off-by: Matt Reimer <mreimer@vpop.net>
CC: Alan Cox <alan@lxorguk.ukuu.org.uk>
CC: linux-ide@vger.kernel.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: increase timeout in wait_drive_not_busy()
Bartlomiej Zolnierkiewicz [Fri, 20 Jun 2008 18:53:33 +0000 (20:53 +0200)]
ide: increase timeout in wait_drive_not_busy()

Some ATAPI devices take longer than the current max timeout value to
become ready (i.e. TEAC DV-W28ECW takes 6 ms) so increase the timeout
value to 10 ms.

This fixes kernel.org bugzilla bug #10887:
http://bugzilla.kernel.org/show_bug.cgi?id=10887

Reported-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agopalm_bk3710: fix resource management
Sergei Shtylyov [Fri, 20 Jun 2008 18:53:32 +0000 (20:53 +0200)]
palm_bk3710: fix resource management

The driver expected a *virtual* address in the IDE platform device's memory
resource and didn't request the memory region for the register block. Fix this
taking into account the fact that DaVinci SoC devices are fixed-mapped to the
virtual memory early and we can get their virtual addresses using IO_ADDRESS()
macro, not having to call ioremap()...

While at it, also do some cosmetic changes...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoReinstate ZERO_PAGE optimization in 'get_user_pages()' and fix XIP
Linus Torvalds [Fri, 20 Jun 2008 18:18:25 +0000 (11:18 -0700)]
Reinstate ZERO_PAGE optimization in 'get_user_pages()' and fix XIP

KAMEZAWA Hiroyuki and Oleg Nesterov point out that since the commit
557ed1fa2620dc119adb86b34c614e152a629a80 ("remove ZERO_PAGE") removed
the ZERO_PAGE from the VM mappings, any users of get_user_pages() will
generally now populate the VM with real empty pages needlessly.

We used to get the ZERO_PAGE when we did the "handle_mm_fault()", but
since fault handling no longer uses ZERO_PAGE for new anonymous pages,
we now need to handle that special case in follow_page() instead.

In particular, the removal of ZERO_PAGE effectively removed the core
file writing optimization where we would skip writing pages that had not
been populated at all, and increased memory pressure a lot by allocating
all those useless newly zeroed pages.

This reinstates the optimization by making the unmapped PTE case the
same as for a non-existent page table, which already did this correctly.

While at it, this also fixes the XIP case for follow_page(), where the
caller could not differentiate between the case of a page that simply
could not be used (because it had no "struct page" associated with it)
and a page that just wasn't mapped.

We do that by simply returning an error pointer for pages that could not
be turned into a "struct page *".  The error is arbitrarily picked to be
EFAULT, since that was what get_user_pages() already used for the
equivalent IO-mapped page case.

[ Also removed an impossible test for pte_offset_map_lock() failing:
  that's not how that function works ]

Acked-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Nick Piggin <npiggin@suse.de>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoExt4: Fix online resize block group descriptor corruption
Frederic Bohe [Fri, 20 Jun 2008 15:48:48 +0000 (11:48 -0400)]
Ext4: Fix online resize block group descriptor corruption

This is the patch for the group descriptor table corruption during
online resize pointed out by Theodore Tso.  The problem was caused by
the fact that the ext4 group descriptor can be either 32 or 64 bytes
long.  Only the 64 bytes structure was taken into account.

Signed-off-by: Frederic Bohe <frederic.bohe@bull.net>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
16 years agoMerge branch 'bugzilla-9761' into release
Len Brown [Fri, 20 Jun 2008 06:47:16 +0000 (02:47 -0400)]
Merge branch 'bugzilla-9761' into release

16 years agoMerge branch 'bugzilla-10695' into release
Len Brown [Fri, 20 Jun 2008 06:45:05 +0000 (02:45 -0400)]
Merge branch 'bugzilla-10695' into release

16 years agodrm: only trust core drm ioctls - driver ioctls are a mess.
Dave Airlie [Fri, 20 Jun 2008 05:42:38 +0000 (15:42 +1000)]
drm: only trust core drm ioctls - driver ioctls are a mess.

So driver ioctls need a full auditing before we can make this change.

Signed-off-by: Dave Airlie <airlied@redhat.com>
16 years agodrm/i915: add support for Intel series 4 chipsets.
Zhenyu Wang [Fri, 20 Jun 2008 02:12:56 +0000 (12:12 +1000)]
drm/i915: add support for Intel series 4 chipsets.

Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
16 years ago[agp]: fixup chipset flush for new Intel G4x.
Zhenyu Wang [Fri, 20 Jun 2008 01:48:06 +0000 (11:48 +1000)]
[agp]: fixup chipset flush for new Intel G4x.

Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
16 years agoipv6: Drop packets for loopback address from outside of the box.
YOSHIFUJI Hideaki [Thu, 19 Jun 2008 23:33:57 +0000 (16:33 -0700)]
ipv6: Drop packets for loopback address from outside of the box.

[ Based upon original report and patch by Karsten Keil.  Karsten
  has verified that this fixes the TAHI test case "ICMPv6 test
  v6LC.5.1.2 Part F". -DaveM ]

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agoipv6: Remove options header when setsockopt's optlen is 0
Shan Wei [Thu, 19 Jun 2008 23:29:39 +0000 (16:29 -0700)]
ipv6: Remove options header when setsockopt's optlen is 0

Remove the sticky Hop-by-Hop options header by calling setsockopt()
for IPV6_HOPOPTS with a zero option length, per RFC3542.

Routing header and Destination options header does the same as
Hop-by-Hop options header.

Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agox86, geode: add a VSA2 ID for General Software
Jordan Crouse [Wed, 18 Jun 2008 17:34:38 +0000 (11:34 -0600)]
x86, geode: add a VSA2 ID for General Software

General Software writes their own VSA2 module for their version
of the Geode BIOS, which returns a different ID then the standard
VSA2.  This was causing the framebuffer driver to break for most
GSW boards.

Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Cc: tglx@linutronix.de
Cc: linux-geode@lists.infradead.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agosched, delay accounting: fix incorrect delay time when constantly waiting on runqueue
Bharath Ravi [Mon, 16 Jun 2008 09:41:01 +0000 (15:11 +0530)]
sched, delay accounting: fix incorrect delay time when constantly waiting on runqueue

This patch corrects the incorrect value of per process run-queue wait
time reported by delay statistics. The anomaly was due to the following
reason. When a process leaves the CPU and immediately starts waiting for
CPU on the runqueue (which means it remains in the TASK_RUNNABLE state),
the time of re-entry into the run-queue is never recorded. Due to this,
the waiting time on the runqueue from this point of re-entry upto the
next time it hits the CPU is not accounted for. This is solved by
recording the time of re-entry of a process leaving the CPU in the
sched_info_depart() function IF the process will go back to waiting on
the run-queue. This IF condition is verified by checking whether the
process is still in the TASK_RUNNABLE state.

The patch was tested on 2.6.26-rc6 using two simple CPU hog programs.
The values noted prior to the fix did not account for the time spent on
the runqueue waiting. After the fix, the correct values were reported
back to user space.

Signed-off-by: Bharath Ravi <bharathravi1@gmail.com>
Signed-off-by: Madhava K R <madhavakr@gmail.com>
Cc: dhaval@linux.vnet.ibm.com
Cc: vatsa@in.ibm.com
Cc: balbir@in.ibm.com
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agohwmon: (lm75) sensor reading bugfix
David Brownell [Sun, 4 May 2008 02:19:16 +0000 (19:19 -0700)]
hwmon: (lm75) sensor reading bugfix

LM75 sensor reading bugfix: never save error status as valid
sensor output.  This could be improved, but at least this
prevents certain rude failure modes.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
16 years agohwmon: (abituguru3) update driver detection
Hans de Goede [Fri, 23 May 2008 14:10:41 +0000 (16:10 +0200)]
hwmon: (abituguru3) update driver detection

It has been reported that the abituguru3 driver fails to load after a BIOS
update. This patch fixes this by loosening the detection routine so that it
will work after the BIOS update too. To compensate for the now very loose
detection an additional check is added on the DMI Base Board vendor string to
make sure we only load on Abit motherboards, this is the same as the check in
the abituguru (1 / 2) driver.

Signed-of-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
16 years agohwmon: (w83791d) new maintainer
Marc Hulsman [Sun, 8 Jun 2008 14:59:41 +0000 (10:59 -0400)]
hwmon: (w83791d) new maintainer

Signed-off-by: Charles Spirakis <bezaur@gmail.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
16 years agohwmon: (abituguru3) Identify Abit AW8D board as such
Hans de Goede [Tue, 26 Feb 2008 18:34:48 +0000 (19:34 +0100)]
hwmon: (abituguru3) Identify Abit AW8D board as such

This patch identifies the Abit AW8D board as such, and adds support for its
aux5 fan connector

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
16 years agohwmon: Update the sysfs interface documentation
Jean Delvare [Sat, 23 Feb 2008 09:57:53 +0000 (10:57 +0100)]
hwmon: Update the sysfs interface documentation

* Document the characteristics of libsensors 3.0.0 and 3.0.1.
* The sysfs interface is no longer subject to changes.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Juerg Haefliger <juergh at gmail.com>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
16 years agohwmon: (adt7473) Initialize max_duty_at_overheat before use
Jean Delvare [Sat, 26 Apr 2008 14:34:26 +0000 (16:34 +0200)]
hwmon: (adt7473) Initialize max_duty_at_overheat before use

data->max_duty_at_overheat is not updated in adt7473_update_device,
so it might be used before it is initialized (if the user reads from
sysfs file max_duty_at_crit before writing to it.)

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
16 years agohwmon: (lm85) Fix function RANGE_TO_REG()
Jean Delvare [Thu, 3 Apr 2008 08:40:39 +0000 (10:40 +0200)]
hwmon: (lm85) Fix function RANGE_TO_REG()

Function RANGE_TO_REG() is broken. For a requested range of 2000 (2
degrees C), it will return an index value of 15, i.e. 80.0 degrees C,
instead of the expected index value of 0. All other values are handled
properly, just 2000 isn't.

The bug was introduced back in November 2004 by this patch:
http://git.kernel.org/?p=linux/kernel/git/tglx/history.git;a=commit;h=1c28d80f1992240373099d863e4996cdd5d646d0

While this can be fixed easily with the current code, I'd rather
rewrite the whole function in a way which is more obviously correct.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Justin Thiessen <jthiessen@penguincomputing.com>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
16 years agoBlackfin Serial Driver: Use timer to poll CTS PIN instead of workqueue.
Sonic Zhang [Thu, 19 Jun 2008 09:46:39 +0000 (17:46 +0800)]
Blackfin Serial Driver: Use timer to poll CTS PIN instead of workqueue.

This allows other threads to run when the serial driver polls the CTS
PIN in a loop.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
16 years agoBlackfin arch: fix typo error in bf548 serial header file
Sonic Zhang [Thu, 19 Jun 2008 09:07:15 +0000 (17:07 +0800)]
Blackfin arch: fix typo error in bf548 serial header file

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
16 years agox86: use BOOTMEM_EXCLUSIVE on 32-bit
Bernhard Walle [Sun, 8 Jun 2008 14:16:07 +0000 (16:16 +0200)]
x86: use BOOTMEM_EXCLUSIVE on 32-bit

This patch uses the BOOTMEM_EXCLUSIVE for crashkernel reservation also for
i386 and prints a error message on failure.

The patch is still for 2.6.26 since it is only bug fixing. The unification
of reserve_crashkernel() between i386 and x86_64 should be done for 2.6.27.

Signed-off-by: Bernhard Walle <bwalle@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: <stable@kernel.org>
16 years agox86, 32-bit: fix boot failure on TSC-less processors
Mikael Pettersson [Sun, 15 Jun 2008 00:19:56 +0000 (02:19 +0200)]
x86, 32-bit: fix boot failure on TSC-less processors

Booting 2.6.26-rc6 on my 486 DX/4 fails with a "BUG: Int 6"
(invalid opcode) and a kernel halt immediately after the
kernel has been uncompressed. The BUG shows EIP pointing
to an rdtsc instruction in native_read_tsc(), invoked from
native_sched_clock().

(This error occurs so early that not even the serial console
can capture it.)

A bisection showed that this bug first occurs in 2.6.26-rc3-git7,
via commit 9ccc906c97e34fd91dc6aaf5b69b52d824386910:

>x86: distangle user disabled TSC from unstable
>
>tsc_enabled is set to 0 from the command line switch "notsc" and from
>the mark_tsc_unstable code. Seperate those functionalities and replace
>tsc_enable with tsc_disable. This makes also the native_sched_clock()
>decision when to use TSC understandable.
>
>Preparatory patch to solve the sched_clock() issue on 32 bit.
>
>Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

The core reason for this bug is that native_sched_clock() gets
called before tsc_init().

Before the commit above, tsc_32.c used a "tsc_enabled" variable
which defaulted to 0 == disabled, and which only got enabled late
in tsc_init(). Thus early calls to native_sched_clock() would skip
the TSC and use jiffies instead.

After the commit above, tsc_32.c uses a "tsc_disabled" variable
which defaults to 0, meaning that the TSC is Ok to use. Early calls
to native_sched_clock() now erroneously try to use the TSC on
!cpu_has_tsc processors, leading to invalid opcode exceptions.

My proposed fix is to initialise tsc_disabled to a "soft disabled"
state distinct from the hard disabled state set up by the "notsc"
kernel option. This fixes the native_sched_clock() problem. It also
allows tsc_init() to be simplified: instead of setting tsc_disabled = 1
on every error return, we just set tsc_disabled = 0 once when all
checks have succeeded.

I've verified that this lets my 486 boot again. I've also verified
that a Core2 machine still uses the TSC as clocksource after the patch.

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: fix NULL pointer deref in __switch_to
Suresh Siddha [Fri, 13 Jun 2008 22:47:12 +0000 (15:47 -0700)]
x86: fix NULL pointer deref in __switch_to

Patrick McHardy reported a crash:

> > I get this oops once a day, its apparently triggered by something
> > run by cron, but the process is a different one each time.
> >
> > Kernel is -git from yesterday shortly before the -rc6 release
> > (last commit is the usb-2.6 merge, the x86 patches are missing),
> > .config is attached.
> >
> > I'll retry with current -git, but the patches that have gone in
> > since I last updated don't look related.
> >
> > [62060.043009] BUG: unable to handle kernel NULL pointer dereference at
> > 000001ff
> > [62060.043009] IP: [<c0102a9b>] __switch_to+0x2f/0x118
> > [62060.043009] *pde = 00000000
> > [62060.043009] Oops: 0002 [#1] PREEMPT

Vegard Nossum analyzed it:

> This decodes to
>
>    0:   0f ae 00                fxsave (%eax)
>
> so it's related to the floating-point context. This is the exact
> location of the crash:
>
> $ addr2line -e arch/x86/kernel/process_32.o -i ab0
> include/asm/i387.h:232
> include/asm/i387.h:262
> arch/x86/kernel/process_32.c:595
>
> ...so it looks like prev_task->thread.xstate->fxsave has become NULL.
> Or maybe it never had any other value.

Somehow (as described below) TS_USEDFPU is set but the fpu is not
allocated or freed.

Another possible FPU pre-emption issue with the sleazy FPU optimization
which was benign before but not so anymore, with the dynamic FPU allocation
patch.

New task is getting exec'd and it is prempted at the below point.

flush_thread() {
...
/*
* Forget coprocessor state..
*/
clear_fpu(tsk);
<----- Preemption point
clear_used_math();
...
}

Now when it context switches in again, as the used_math() is still set
and fpu_counter can be > 5, we will do a math_state_restore() which sets
the task's TS_USEDFPU. After it continues from the above preemption point
it does clear_used_math() and much later free_thread_xstate().

Now, at the next context switch, it is quite possible that xstate is
null, used_math() is not set and TS_USEDFPU is still set. This will
trigger unlazy_fpu() causing kernel oops.

Fix this  by clearing tsk's fpu_counter before clearing task's fpu.

Reported-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: set PAE PHYSICAL_MASK_SHIFT to 44 bits.
Jeremy Fitzhardinge [Fri, 6 Jun 2008 09:21:39 +0000 (10:21 +0100)]
x86: set PAE PHYSICAL_MASK_SHIFT to 44 bits.

When a 64-bit x86 processor runs in 32-bit PAE mode, a pte can
potentially have the same number of physical address bits as the
64-bit host ("Enhanced Legacy PAE Paging").  This means, in theory,
we could have up to 52 bits of physical address in a pte.

The 32-bit kernel uses a 32-bit unsigned long to represent a pfn.
This means that it can only represent physical addresses up to 32+12=44
bits wide.  Rather than widening pfns everywhere, just set 2^44 as the
Linux x86_32-PAE architectural limit for physical address size.

This is a bugfix for two cases:
1. running a 32-bit PAE kernel on a machine with
  more than 64GB RAM.
2. running a 32-bit PAE Xen guest on a host machine with
  more than 64GB RAM

In both cases, a pte could need to have more than 36 bits of physical,
and masking it to 36-bits will cause fairly severe havoc.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Jan Beulich <jbeulich@novell.com>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agosoftlockup: fix NMI hangs due to lock race - 2.6.26-rc regression
Jason Wessel [Tue, 27 May 2008 17:23:29 +0000 (12:23 -0500)]
softlockup: fix NMI hangs due to lock race - 2.6.26-rc regression

The touch_nmi_watchdog() routine on x86 ultimately calls
touch_softlockup_watchdog().  The problem is that to touch the
softlockup watchdog, the cpu_clock code has to be called which could
involve multiple cpu locks and can lead to a hard hang if one of the
locks is held by a processor that is not going to return anytime soon
(such as could be the case with kgdb or perhaps even with some other
kind of exception).

This patch causes the public version of the
touch_softlockup_watchdog() to defer the cpu clock access to a later
point.

The test case for this problem is to use the following kernel config
options:

CONFIG_KGDB_TESTS=y
CONFIG_KGDB_TESTS_ON_BOOT=y
CONFIG_KGDB_TESTS_BOOT_STRING="V1F100I100000"

It should be noted that kgdb test suite and these options were not
available until 2.6.26-rc2, so it was necessary to patch the kgdb
test suite during the bisection.

I would consider this patch a regression fix because the problem first
appeared in commit 27ec4407790d075c325e1f4da0a19c56953cce23 when some
logic was added to try to periodically sync the clocks.  It was
possible to work around this particular problem by simply not
performing the sync anytime the system was in a critical context.
This was ok until commit 3e51f33fcc7f55e6df25d15b55ed10c8b4da84cd,
which added config option CONFIG_HAVE_UNSTABLE_SCHED_CLOCK and some
multi-cpu locks to sync the clocks.  It became clear that accessing
this code from an nmi was the source of the lockups.  Avoiding the
access to the low level clock code from an code inside the NMI
processing also fixed the problem with the 27ec44... commit.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agorcupreempt: remove export of rcu_batches_completed_bh
Steven Rostedt [Thu, 22 May 2008 18:18:17 +0000 (14:18 -0400)]
rcupreempt: remove export of rcu_batches_completed_bh

In rcupreempt, rcu_batches_completed_bh is defined as a static inline in
the header file. This does not need to be exported, and not only that,
this breaks my PPC build.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: paulus@samba.org
Cc: linuxppc-dev@ozlabs.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agocpuset: limit the input of cpuset.sched_relax_domain_level
Li Zefan [Tue, 13 May 2008 02:27:17 +0000 (10:27 +0800)]
cpuset: limit the input of cpuset.sched_relax_domain_level

We allow the inputs to be [-1 ... SD_LV_MAX), and return -EINVAL
for inputs outside this range.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Paul Menage <menage@google.com>
Acked-by: Paul Jackson <pj@sgi.com>
Acked-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agoMerge branch 'linus' into sched/urgent
Ingo Molnar [Thu, 19 Jun 2008 07:37:31 +0000 (09:37 +0200)]
Merge branch 'linus' into sched/urgent

16 years agosched: CPU hotplug events must not destroy scheduler domains created by the cpusets
Max Krasnyansky [Thu, 29 May 2008 18:17:01 +0000 (11:17 -0700)]
sched: CPU hotplug events must not destroy scheduler domains created by the cpusets

First issue is not related to the cpusets. We're simply leaking doms_cur.
It's allocated in arch_init_sched_domains() which is called for every
hotplug event. So we just keep reallocation doms_cur without freeing it.
I introduced free_sched_domains() function that cleans things up.

Second issue is that sched domains created by the cpusets are
completely destroyed by the CPU hotplug events. For all CPU hotplug
events scheduler attaches all CPUs to the NULL domain and then puts
them all into the single domain thereby destroying domains created
by the cpusets (partition_sched_domains).
The solution is simple, when cpusets are enabled scheduler should not
create default domain and instead let cpusets do that. Which is
exactly what the patch does.

Signed-off-by: Max Krasnyansky <maxk@qualcomm.com>
Cc: pj@sgi.com
Cc: menage@google.com
Cc: rostedt@goodmis.org
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agosched: rt-group: fix RR buglet
Peter Zijlstra [Thu, 19 Jun 2008 07:06:59 +0000 (09:06 +0200)]
sched: rt-group: fix RR buglet

In tick_task_rt() we first call update_curr_rt() which can dequeue a runqueue
due to it running out of runtime, and then we try to requeue it, of it also
having exhausted its RR quota. Obviously requeueing something that is no longer
on the runqueue will not have the expected result.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: Daniel K. <dk@uw.no>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agosched: rt-group: heirarchy aware throttle
Peter Zijlstra [Thu, 19 Jun 2008 07:06:57 +0000 (09:06 +0200)]
sched: rt-group: heirarchy aware throttle

The bandwidth throttle code dequeues a group when it runs out of quota, and
re-queues it once the period rolls over and the quota gets refreshed.

Sadly it failed to take the hierarchy into consideration. Share more of the
enqueue/dequeue code with regular task opterations.

Also, some operations like sched_setscheduler() can dequeue/enqueue tasks that
are in throttled runqueues, we should not inadvertly re-enqueue empty runqueues
so check for that.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: Daniel K. <dk@uw.no>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agosched: rt-group: fix hierarchy
Peter Zijlstra [Thu, 19 Jun 2008 07:06:56 +0000 (09:06 +0200)]
sched: rt-group: fix hierarchy

Don't re-set the entity's runqueue to the wrong rq after we've set it
to the right one.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: Daniel K. <dk@uw.no>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agosched: NULL pointer dereference while setting sched_rt_period_us
Dario Faggioli [Wed, 18 Jun 2008 07:18:38 +0000 (09:18 +0200)]
sched: NULL pointer dereference while setting sched_rt_period_us

When CONFIG_RT_GROUP_SCHED and CONFIG_CGROUP_SCHED are enabled, with:

 echo 10000 > /proc/sys/kernel/sched_rt_period_us

We get this:

 BUG: unable to handle kernel NULL pointer dereference at 0000008c
 [  947.682233] IP: [<c0216b72>] __rt_schedulable+0x12/0x160
 [  947.683123] *pde = 00000000=20
 [  947.683782] Oops: 0000 [#1]
 [  947.684307] Modules linked in:
 [  947.684308]
 [  947.684308] Pid: 2359, comm: bash Not tainted (2.6.26-rc6 #8)
 [  947.684308] EIP: 0060:[<c0216b72>] EFLAGS: 00000246 CPU: 0
 [  947.684308] EIP is at __rt_schedulable+0x12/0x160
 [  947.684308] EAX: 00000000 EBX: 00000000 ECX: 00000000 EDX: 00000001
 [  947.684308] ESI: c0521db4 EDI: 00000001 EBP: c6cc9f00 ESP: c6cc9ed0
 [  947.684308]  DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068
 [  947.684308] Process bash (pid: 2359, tiÆcc8000 taskÇa54f00=20 task.tiÆcc8000)
 [  947.684308] Stack: c0222790 00000000 080f8c08 c0521db4 c6cc9f00 00000001 00000000 00000000
 [  947.684308]        c6cc9f9c 00000000 c0521db4 00000001 c6cc9f28 c0216d40 00000000 00000000
 [  947.684308]        c6cc9f9c 000f4240 000e7ef0 ffffffff c0521db4 c79dfb60 c6cc9f58 c02af2cc
 [  947.684308] Call Trace:
 [  947.684308]  [<c0222790>] ? do_proc_dointvec_conv+0x0/0x50
 [  947.684308]  [<c0216d40>] ? sched_rt_handler+0x80/0x110
 [  947.684308]  [<c02af2cc>] ? proc_sys_call_handler+0x9c/0xb0
 [  947.684308]  [<c02af2fa>] ? proc_sys_write+0x1a/0x20
 [  947.684308]  [<c0273c36>] ? vfs_write+0x96/0x160
 [  947.684308]  [<c02af2e0>] ? proc_sys_write+0x0/0x20
 [  947.684308]  [<c027423d>] ? sys_write+0x3d/0x70
 [  947.684308]  [<c0202ef5>] ? sysenter_past_esp+0x6a/0x91
 [  947.684308]  =======================
 [  947.684308] Code: 24 04 e8 62 b1 0e 00 89 c7 89 f8 8b 5d f4 8b 75
 f8 8b 7d fc 89 ec 5d c3 90 55 89 e5 57 56 53 83 ec 24 89 45 ec 89 55 e4
 89 4d e8 <8b> b8 8c 00 00 00 85 ff 0f 84 c9 00 00 00 8b 57 24 39 55 e8
 8b
 [  947.684308] EIP: [<c0216b72>] __rt_schedulable+0x12/0x160 SS:ESP  0068:c6cc9ed0

We think the following patch solves the issue.

Signed-off-by: Dario Faggioli <raistlin@linux.it>
Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agoagp: brown paper bag patch - put back two lines that got lost
Dave Airlie [Thu, 19 Jun 2008 04:57:31 +0000 (14:57 +1000)]
agp: brown paper bag patch - put back two lines that got lost

Commit 62c96b9d0917894c164aa3e474a3ff3bca1554ae ("agp/intel: cleanup
some serious whitespace badness") didn't just fix whitespace.  It also
lost two lines.

Noticed by Linus. No more whitespace diffs for me.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoagp: brown paper bag patch - put back the two lines it took out.
Dave Airlie [Thu, 19 Jun 2008 04:57:31 +0000 (14:57 +1000)]
agp: brown paper bag patch - put back the two lines it took out.

no more whitespace diffs for me.

Signed-off-by: Dave Airlie <airlied@redhat.com>
16 years agoMerge branch 'agp-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
Linus Torvalds [Thu, 19 Jun 2008 04:52:35 +0000 (21:52 -0700)]
Merge branch 'agp-patches' of git://git./linux/kernel/git/airlied/agp-2.6

* 'agp-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6:
  agp/intel: cleanup some serious whitespace badness
  [AGP] intel_agp: Add support for Intel 4 series chipsets
  [AGP] intel_agp: extra stolen mem size available for IGD_GM chipset
  agp: more boolean conversions.
  drivers/char/agp - use bool
  agp: two-stage page destruction issue
  agp/via: fixup pci ids

16 years agoagp/intel: cleanup some serious whitespace badness
Dave Airlie [Thu, 19 Jun 2008 04:27:53 +0000 (14:27 +1000)]
agp/intel: cleanup some serious whitespace badness

Signed-off-by: Dave Airlie <airlied@redhat.com>
16 years ago[AGP] intel_agp: Add support for Intel 4 series chipsets
Zhenyu Wang [Thu, 19 Jun 2008 04:17:58 +0000 (14:17 +1000)]
[AGP] intel_agp: Add support for Intel 4 series chipsets

Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
16 years ago[AGP] intel_agp: extra stolen mem size available for IGD_GM chipset
Zhenyu Wang [Thu, 19 Jun 2008 04:00:37 +0000 (14:00 +1000)]
[AGP] intel_agp: extra stolen mem size available for IGD_GM chipset

This adds missing stolen memory size detect for IGD_GM, be sure to
detect right size as current X intel driver (2.3.2) which has already
worked out.

Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
16 years agodrm/radeon: add hier-z registers for r300 and r500 chipsets
Dave Airlie [Thu, 19 Jun 2008 03:01:58 +0000 (13:01 +1000)]
drm/radeon: add hier-z registers for r300 and r500 chipsets

16 years agodrm/radeon: use DSTCACHE_CTLSTAT rather than RB2D_DSTCACHE_CTLSTAT
Alex Deucher [Thu, 19 Jun 2008 02:39:23 +0000 (12:39 +1000)]
drm/radeon: use DSTCACHE_CTLSTAT rather than RB2D_DSTCACHE_CTLSTAT

According to the hw guys, you should use DSTCACHE_CTLSTAT to flush
the 2D dst cache rather than RB2D_DSTCACHE_CTLSTAT.

Signed-off-by: Dave Airlie <airlied@redhat.com>
16 years agodrm/radeon: switch IGP gart to use radeon_write_agp_base()
Alex Deucher [Thu, 19 Jun 2008 02:38:29 +0000 (12:38 +1000)]
drm/radeon: switch IGP gart to use radeon_write_agp_base()

Signed-off-by: Dave Airlie <airlied@redhat.com>
16 years agodrm/radeon: Restore sw interrupt on resume
Dennis Kasprzyk [Thu, 19 Jun 2008 02:36:55 +0000 (12:36 +1000)]
drm/radeon: Restore sw interrupt on resume

Fixes performance drop after suspend/resume on some systems.

Signed-off-by: Dave Airlie <airlied@redhat.com>
16 years agodrm/r500: add support for AGP based cards.
Dave Airlie [Thu, 19 Jun 2008 01:40:44 +0000 (11:40 +1000)]
drm/r500: add support for AGP based cards.

AGP registers weren't programmed properly for r500 cards.

Signed-off-by: Dave Airlie <airlied@redhat.com>
16 years agodrm/radeon: fix texture uploads with large 3d textures (bug 13980)
Roland Scheidegger [Thu, 19 Jun 2008 01:36:04 +0000 (11:36 +1000)]
drm/radeon: fix texture uploads with large 3d textures (bug 13980)

Texture uploads could hit the blitter coordinate limit, adjust the texture
offset when uploading the pieces. Make sure to check the end address of the
upload too.

Signed-off-by: Dave Airlie <airlied@redhat.com>
16 years agodrm/radeon: add initial r500 support.
Dave Airlie [Wed, 28 May 2008 03:52:28 +0000 (13:52 +1000)]
drm/radeon: add initial r500 support.

This contains all the command buffer processing for the r500 cards.
It doesn't yet contain vblank support.

Signed-off-by: Dave Airlie <airlied@redhat.com>
16 years agodrm/radeon: init pipe setup in kernel code.
Alex Deucher [Wed, 28 May 2008 01:57:40 +0000 (11:57 +1000)]
drm/radeon: init pipe setup in kernel code.

This inits the card pipes in the kernel and lets userspace getparam
the correct setup.

Signed-off-by: Dave Airlie <airlied@redhat.com>
16 years agodrm/radeon: fixup radeon_do_engine_reset
Alex Deucher [Wed, 28 May 2008 01:54:06 +0000 (11:54 +1000)]
drm/radeon: fixup radeon_do_engine_reset

Cleanup do engine reset for different chip families.

Signed-off-by: Dave Airlie <airlied@redhat.com>
16 years agodrm/radeon: fix pixcache and purge/cache flushing registers
Alex Deucher [Wed, 28 May 2008 01:51:12 +0000 (11:51 +1000)]
drm/radeon: fix pixcache and purge/cache flushing registers

Signed-off-by: Dave Airlie <airlied@redhat.com>
16 years agodrm/radeon: write AGP_BASE_2 on chips that support it.
Alex Deucher [Wed, 28 May 2008 01:46:36 +0000 (11:46 +1000)]
drm/radeon: write AGP_BASE_2 on chips that support it.

Signed-off-by: Dave Airlie <airlied@redhat.com>
16 years agodrm/radeon: merge IGP chip setup and fixup RS400 vs RS480 support
Alex Deucher [Wed, 28 May 2008 03:28:59 +0000 (13:28 +1000)]
drm/radeon: merge IGP chip setup and fixup RS400 vs RS480 support

We only support RS480 (AMD based IGP) at the moment not
RS400 (Intel based IGP) ones.

Signed-off-by: Dave Airlie <airlied@redhat.com>
16 years agodrm/radeon: IGP clean up register and magic numbers.
Alex Deucher [Wed, 28 May 2008 02:54:16 +0000 (12:54 +1000)]
drm/radeon: IGP clean up register and magic numbers.

Signed-off-by: Dave Airlie <airlied@redhat.com>
16 years agodrm/rs690: set base 2 to 0.
Dave Airlie [Wed, 28 May 2008 01:28:27 +0000 (11:28 +1000)]
drm/rs690: set base 2 to 0.

Signed-off-by: Dave Airlie <airlied@redhat.com>
16 years agodrm/rs690: set all of gart base address.
Dave Airlie [Wed, 28 May 2008 01:27:01 +0000 (11:27 +1000)]
drm/rs690: set all of gart base address.

Docs state bits 4-11 maps to bits 32-39 of the 40-bit range

Signed-off-by: Dave Airlie <airlied@redhat.com>
16 years agoradeon: add production microcode from AMD
Alex Deucher [Wed, 28 May 2008 01:21:25 +0000 (11:21 +1000)]
radeon: add production microcode from AMD

This adds production microcode for r100->r500 from AMD.

Signed-off-by: Dave Airlie <airlied@redhat.com>
16 years agodrm: pcigart use proper pci map interfaces.
Dave Airlie [Thu, 19 Jun 2008 01:27:23 +0000 (11:27 +1000)]
drm: pcigart use proper pci map interfaces.

Switch to using more correct pci dma mapping interfaces.

Signed-off-by: Dave Airlie <airlied@redhat.com>
16 years agoahci: sis can't do PMP
Tejun Heo [Thu, 19 Jun 2008 00:56:58 +0000 (20:56 -0400)]
ahci: sis can't do PMP

From: Piter PUNK <piterpunk@slackware.com>

SiS AHCIs say they can do PMP but can't and fail detection if SRST w/
pmp==15 is used.  Turn off PMP support.

tj: added patch description, adapted patch to #upstream-fixes and
    renamed board_ahci_sis to board_ahci_nopmp.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agoagp: more boolean conversions.
Dave Airlie [Thu, 19 Jun 2008 00:42:17 +0000 (10:42 +1000)]
agp: more boolean conversions.

Signed-off-by: Dave Airlie <airlied@redhat.com>
16 years agoata_piix: add TECRA M4 to broken suspend list
Tejun Heo [Fri, 13 Jun 2008 09:05:02 +0000 (18:05 +0900)]
ata_piix: add TECRA M4 to broken suspend list

TOSHIBA also used "TECRA M4" in additon to "Tecra M4", add it.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agoLIBATA: Add HAVE_PATA_PLATFORM to select PATA_PLATFORM driver
Ben Dooks [Mon, 16 Jun 2008 11:16:26 +0000 (12:16 +0100)]
LIBATA: Add HAVE_PATA_PLATFORM to select PATA_PLATFORM driver

Add HAVE_PATA_PLATFORM to select the pata platform driver
to ensure that we do not end up with a long 'depends on' list
when other users of this driver turn up.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agosata_mv: warn on PIO with multiple DRQs
Mark Lord [Wed, 18 Jun 2008 16:13:02 +0000 (12:13 -0400)]
sata_mv: warn on PIO with multiple DRQs

Chip errata sometimes prevents reliable use of PIO commands which involve
more than a single DRQ (data request).  In normal operation, libata should
not generate such PIO commands (uses DMA instead), but they could be sent
in via SG_IO from userspace.

A full workaround might be to break up such commands into sequences
of single DRQ ones, but that's just way too complex for something
that doesn't normally happen in real life.

So, allow the attempt (it often works, despite the errata),
but log the event for reference when somebody screams.

Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agosata_mv: enable async_notify for 60x1 Rev.C0 and higher
Mark Lord [Wed, 18 Jun 2008 16:11:16 +0000 (12:11 -0400)]
sata_mv: enable async_notify for 60x1 Rev.C0 and higher

The early chipsets cannot safely handle Async Notification (AN),
but 6041/6081 chip revision "C0" (and newer) can handle it.

So allow AN for "C0" and higher.

This enables use of hotplug on PMP ports for the 6041/6081 PCI Rev.9 chips.

Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agolibata: don't check whether to use DMA or not for no data commands
Tejun Heo [Tue, 17 Jun 2008 03:36:26 +0000 (12:36 +0900)]
libata: don't check whether to use DMA or not for no data commands

There's no reason to check whether to use DMA or not for no data
commands.  Don't do it.  While at it, make local variable using_pio in
atapi_xlat() set iff ATAPI_PROT_PIO is going to be used and rename
ata_check_atapi_dma() to atapi_check_dma() for consistency.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agoahci: jmb361 has only one port
Tejun Heo [Tue, 17 Jun 2008 03:46:30 +0000 (12:46 +0900)]
ahci: jmb361 has only one port

JMB361 has only one port but reports it has two causing longish probe
failure on the second one.  Quirk it.

Reported by Gajo Petrovic in bz 10911.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Gajo Petrovic <gajo01@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agodrivers/char/agp - use bool
Joe Perches [Wed, 26 Mar 2008 21:10:02 +0000 (14:10 -0700)]
drivers/char/agp - use bool

Use boolean in AGP instead of having own TRUE/FALSE

--
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>