GitHub/LineageOS/android_kernel_samsung_universal7580.git
13 years agoKVM: Mask KVM_GET_SUPPORTED_CPUID data with Linux cpuid info
Avi Kivity [Tue, 9 Nov 2010 14:15:43 +0000 (16:15 +0200)]
KVM: Mask KVM_GET_SUPPORTED_CPUID data with Linux cpuid info

This allows Linux to mask cpuid bits if, for example, nx is enabled on only
some cpus.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
13 years agoKVM: SVM: Replace svm_has() by standard Linux cpuid accessors
Avi Kivity [Tue, 9 Nov 2010 14:15:42 +0000 (16:15 +0200)]
KVM: SVM: Replace svm_has() by standard Linux cpuid accessors

Instead of querying cpuid directly, use the Linux accessors (boot_cpu_has,
etc.).  This allows the things like the clearcpuid kernel command line to
work (when it's fixed wrt scattered cpuid bits).

Acked-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
13 years agoKVM: MMU: fix apf prefault if nested guest is enabled
Xiao Guangrong [Fri, 12 Nov 2010 06:49:55 +0000 (14:49 +0800)]
KVM: MMU: fix apf prefault if nested guest is enabled

If apf is generated in L2 guest and is completed in L1 guest, it will
prefault this apf in L1 guest's mmu context.

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
13 years agoKVM: MMU: support apf for nonpaing guest
Xiao Guangrong [Fri, 12 Nov 2010 06:49:11 +0000 (14:49 +0800)]
KVM: MMU: support apf for nonpaing guest

Let's support apf for nonpaing guest

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
13 years agoKVM: MMU: clear apfs if page state is changed
Xiao Guangrong [Fri, 12 Nov 2010 06:47:01 +0000 (14:47 +0800)]
KVM: MMU: clear apfs if page state is changed

If CR0.PG is changed, the page fault cann't be avoid when the prefault address
is accessed later

And it also fix a bug: it can retry a page enabled #PF in page disabled context
if mmu is shadow page

This idear is from Gleb Natapov

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
13 years agoKVM: MMU: fix missing post sync audit
Xiao Guangrong [Fri, 12 Nov 2010 06:46:08 +0000 (14:46 +0800)]
KVM: MMU: fix missing post sync audit

Add AUDIT_POST_SYNC audit for long mode shadow page

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
13 years agoKVM: Clean up vm creation and release
Jan Kiszka [Tue, 9 Nov 2010 16:02:49 +0000 (17:02 +0100)]
KVM: Clean up vm creation and release

IA64 support forces us to abstract the allocation of the kvm structure.
But instead of mixing this up with arch-specific initialization and
doing the same on destruction, split both steps. This allows to move
generic destruction calls into generic code.

It also fixes error clean-up on failures of kvm_create_vm for IA64.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
13 years agoKVM: x86: Makefile clean up
Tracey Dent [Sat, 6 Nov 2010 18:52:58 +0000 (14:52 -0400)]
KVM: x86: Makefile clean up

Changed makefile to use the ccflags-y option instead of EXTRA_CFLAGS.

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
13 years agoKVM: remove unused function declaration
Xiao Guangrong [Thu, 4 Nov 2010 10:29:42 +0000 (18:29 +0800)]
KVM: remove unused function declaration

Remove the declaration of kvm_mmu_set_base_ptes()

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
13 years agoKVM: Refactor srcu struct release on early errors
Jan Kiszka [Tue, 9 Nov 2010 11:42:12 +0000 (12:42 +0100)]
KVM: Refactor srcu struct release on early errors

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
13 years agoKVM: VMX: Disallow NMI while blocked by STI
Avi Kivity [Mon, 1 Nov 2010 21:20:48 +0000 (23:20 +0200)]
KVM: VMX: Disallow NMI while blocked by STI

While not mandated by the spec, Linux relies on NMI being blocked by an
IF-enabling STI.  VMX also refuses to enter a guest in this state, at
least on some implementations.

Disallow NMI while blocked by STI by checking for the condition, and
requesting an interrupt window exit if it occurs.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
13 years agoKVM: fix the race while wakeup all pv guest
Xiao Guangrong [Mon, 1 Nov 2010 09:03:44 +0000 (17:03 +0800)]
KVM: fix the race while wakeup all pv guest

In kvm_async_pf_wakeup_all(), we add a dummy apf to vcpu->async_pf.done
without holding vcpu->async_pf.lock, it will break if we are handling apfs
at this time.

Also use 'list_empty_careful()' instead of 'list_empty()'

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Acked-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
13 years agoKVM: handle more completed apfs if possible
Xiao Guangrong [Tue, 2 Nov 2010 09:35:35 +0000 (17:35 +0800)]
KVM: handle more completed apfs if possible

If it's no need to inject async #PF to PV guest we can handle
more completed apfs at one time, so we can retry guest #PF
as early as possible

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Acked-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
13 years agoKVM: avoid unnecessary wait for a async pf
Xiao Guangrong [Mon, 1 Nov 2010 09:01:28 +0000 (17:01 +0800)]
KVM: avoid unnecessary wait for a async pf

In current code, it checks async pf completion out of the wait context,
like this:

if (vcpu->arch.mp_state == KVM_MP_STATE_RUNNABLE &&
    !vcpu->arch.apf.halted)
r = vcpu_enter_guest(vcpu);
else {
......
kvm_vcpu_block(vcpu)
 ^- waiting until 'async_pf.done' is not empty
}

kvm_check_async_pf_completion(vcpu)
 ^- delete list from async_pf.done

So, if we check aysnc pf completion first, it can be blocked at
kvm_vcpu_block

Fixed by mark the vcpu is unhalted in kvm_check_async_pf_completion()
path

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Acked-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
13 years agoKVM: fix searching async gfn in kvm_async_pf_gfn_slot
Xiao Guangrong [Mon, 1 Nov 2010 09:00:30 +0000 (17:00 +0800)]
KVM: fix searching async gfn in kvm_async_pf_gfn_slot

Don't search later slots if the slot is empty

Acked-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
13 years agoKVM: cleanup async_pf tracepoints
Xiao Guangrong [Mon, 1 Nov 2010 08:59:39 +0000 (16:59 +0800)]
KVM: cleanup async_pf tracepoints

Use 'DECLARE_EVENT_CLASS' to cleanup async_pf tracepoints

Acked-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
13 years agoKVM: fix tracing kvm_try_async_get_page
Xiao Guangrong [Mon, 1 Nov 2010 08:58:43 +0000 (16:58 +0800)]
KVM: fix tracing kvm_try_async_get_page

Tracing 'async' and *pfn is useless, since 'async' is always true,
and '*pfn' is always "fault_pfn'

We can trace 'gva' and 'gfn' instead, it can help us to see the
life-cycle of an async_pf

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
13 years agoKVM: replace vmalloc and memset with vzalloc
Takuya Yoshikawa [Tue, 2 Nov 2010 01:49:34 +0000 (10:49 +0900)]
KVM: replace vmalloc and memset with vzalloc

Let's use newly introduced vzalloc().

Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
13 years agoKVM: handle exit due to INVD in VMX
Gleb Natapov [Mon, 1 Nov 2010 13:35:01 +0000 (15:35 +0200)]
KVM: handle exit due to INVD in VMX

Currently the exit is unhandled, so guest halts with error if it tries
to execute INVD instruction. Call into emulator when INVD instruction
is executed by a guest instead. This instruction is not needed by ordinary
guests, but firmware (like OpenBIOS) use it and fail.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
13 years agoKVM: x86: Avoid issuing wbinvd twice
Jan Kiszka [Mon, 1 Nov 2010 13:01:29 +0000 (14:01 +0100)]
KVM: x86: Avoid issuing wbinvd twice

Micro optimization to avoid calling wbinvd twice on the CPU that has to
emulate it. As we might be preempted between smp_call_function_many and
the local wbinvd, the cache might be filled again so that real work
could be done uselessly.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
13 years agoKVM: get rid of warning within kvm_dev_ioctl_create_vm
Heiko Carstens [Wed, 27 Oct 2010 15:22:10 +0000 (17:22 +0200)]
KVM: get rid of warning within kvm_dev_ioctl_create_vm

Fixes this:

  CC      arch/s390/kvm/../../../virt/kvm/kvm_main.o
arch/s390/kvm/../../../virt/kvm/kvm_main.c: In function 'kvm_dev_ioctl_create_vm':
arch/s390/kvm/../../../virt/kvm/kvm_main.c:1828:10: warning: unused variable 'r'

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
13 years agoKVM: add cast within kvm_clear_guest_page to fix warning
Heiko Carstens [Wed, 27 Oct 2010 15:21:21 +0000 (17:21 +0200)]
KVM: add cast within kvm_clear_guest_page to fix warning

Fixes this:

  CC      arch/s390/kvm/../../../virt/kvm/kvm_main.o
arch/s390/kvm/../../../virt/kvm/kvm_main.c: In function 'kvm_clear_guest_page':
arch/s390/kvm/../../../virt/kvm/kvm_main.c:1224:2: warning: passing argument 3 of 'kvm_write_guest_page' makes pointer from integer without a cast
arch/s390/kvm/../../../virt/kvm/kvm_main.c:1185:5: note: expected 'const void *' but argument is of type 'long unsigned int'

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
13 years agoKVM: use kmalloc() for small dirty bitmaps
Takuya Yoshikawa [Mon, 1 Nov 2010 05:36:09 +0000 (14:36 +0900)]
KVM: use kmalloc() for small dirty bitmaps

Currently we are using vmalloc() for all dirty bitmaps even if
they are small enough, say less than K bytes.

We use kmalloc() if dirty bitmap size is less than or equal to
PAGE_SIZE so that we can avoid vmalloc area usage for VGA.

This will also make the logging start/stop faster.

Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
13 years agoKVM: pre-allocate one more dirty bitmap to avoid vmalloc()
Takuya Yoshikawa [Wed, 27 Oct 2010 09:23:54 +0000 (18:23 +0900)]
KVM: pre-allocate one more dirty bitmap to avoid vmalloc()

Currently x86's kvm_vm_ioctl_get_dirty_log() needs to allocate a bitmap by
vmalloc() which will be used in the next logging and this has been causing
bad effect to VGA and live-migration: vmalloc() consumes extra systime,
triggers tlb flush, etc.

This patch resolves this issue by pre-allocating one more bitmap and switching
between two bitmaps during dirty logging.

Performance improvement:
  I measured performance for the case of VGA update by trace-cmd.
  The result was 1.5 times faster than the original one.

  In the case of live migration, the improvement ratio depends on the workload
  and the guest memory size. In general, the larger the memory size is the more
  benefits we get.

Note:
  This does not change other architectures's logic but the allocation size
  becomes twice. This will increase the actual memory consumption only when
  the new size changes the number of pages allocated by vmalloc().

Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
13 years agoKVM: introduce wrapper functions for creating/destroying dirty bitmaps
Takuya Yoshikawa [Wed, 27 Oct 2010 09:22:19 +0000 (18:22 +0900)]
KVM: introduce wrapper functions for creating/destroying dirty bitmaps

This makes it easy to change the way of allocating/freeing dirty bitmaps.

Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
13 years agoKVM: x86: trace "exit to userspace" event
Gleb Natapov [Sun, 24 Oct 2010 14:49:08 +0000 (16:49 +0200)]
KVM: x86: trace "exit to userspace" event

Add tracepoint for userspace exit.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
13 years agoKVM: propagate fault r/w information to gup(), allow read-only memory
Marcelo Tosatti [Fri, 22 Oct 2010 16:18:18 +0000 (14:18 -0200)]
KVM: propagate fault r/w information to gup(), allow read-only memory

As suggested by Andrea, pass r/w error code to gup(), upgrading read fault
to writable if host pte allows it.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
13 years agoKVM: MMU: flush TLBs on writable -> read-only spte overwrite
Marcelo Tosatti [Fri, 22 Oct 2010 16:18:17 +0000 (14:18 -0200)]
KVM: MMU: flush TLBs on writable -> read-only spte overwrite

This can happen in the following scenario:

vcpu0 vcpu1
read fault
gup(.write=0)
gup(.write=1)
reuse swap cache, no COW
set writable spte
use writable spte
set read-only spte

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
13 years agoKVM: MMU: remove kvm_mmu_set_base_ptes
Marcelo Tosatti [Fri, 22 Oct 2010 16:18:16 +0000 (14:18 -0200)]
KVM: MMU: remove kvm_mmu_set_base_ptes

Unused.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
13 years agoKVM: VMX: remove setting of shadow_base_ptes for EPT
Marcelo Tosatti [Fri, 22 Oct 2010 16:18:15 +0000 (14:18 -0200)]
KVM: VMX: remove setting of shadow_base_ptes for EPT

The EPT present/writable bits use the same position as normal
pagetable bits.

Since direct_map passes ACC_ALL to mmu_set_spte, thus always setting
the writable bit on sptes, use the generic PT_PRESENT shadow_base_pte.

Also pass present/writable error code information from EPT violation
to generic pagefault handler.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
13 years agoKVM: Avoid double interrupt injection with vapic
Avi Kivity [Mon, 25 Oct 2010 13:23:55 +0000 (15:23 +0200)]
KVM: Avoid double interrupt injection with vapic

After an interrupt injection, the PPR changes, and we have to reflect that
into the vapic.  This causes a KVM_REQ_EVENT to be set, which causes the
whole interrupt injection routine to be run again (harmlessly).

Optimize by only setting KVM_REQ_EVENT if the ppr was lowered; otherwise
there is no chance that a new injection is needed.

Signed-off-by: Avi Kivity <avi@redhat.com>
13 years agoKVM: SVM: Fold save_host_msrs() and load_host_msrs() into their callers
Avi Kivity [Thu, 21 Oct 2010 10:20:34 +0000 (12:20 +0200)]
KVM: SVM: Fold save_host_msrs() and load_host_msrs() into their callers

This abstraction only serves to obfuscate.  Remove.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
13 years agoKVM: SVM: Move fs/gs/ldt save/restore to heavyweight exit path
Avi Kivity [Thu, 21 Oct 2010 10:20:33 +0000 (12:20 +0200)]
KVM: SVM: Move fs/gs/ldt save/restore to heavyweight exit path

ldt is never used in the kernel context; same goes for fs (x86_64) and gs
(i386).  So save/restore them in the heavyweight exit path instead
of the lightweight path.

By itself, this doesn't buy us much, but it paves the way for moving vmload
and vmsave to the heavyweight exit path, since they modify the same registers.

[jan: fix copy/pase mistake on i386]

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
13 years agoKVM: SVM: Move svm->host_gs_base into a separate structure
Avi Kivity [Thu, 21 Oct 2010 10:20:32 +0000 (12:20 +0200)]
KVM: SVM: Move svm->host_gs_base into a separate structure

More members will join it soon.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
13 years agoKVM: SVM: Move guest register save out of interrupts disabled section
Avi Kivity [Thu, 21 Oct 2010 10:20:31 +0000 (12:20 +0200)]
KVM: SVM: Move guest register save out of interrupts disabled section

Saving guest registers is just a memory copy, and does not need to be in the
critical section.  Move outside the critical section to improve latency a
bit.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
13 years agoKVM: x86: Add missing inline tag to kvm_read_and_reset_pf_reason
Jan Kiszka [Wed, 20 Oct 2010 16:34:54 +0000 (18:34 +0200)]
KVM: x86: Add missing inline tag to kvm_read_and_reset_pf_reason

May otherwise generates build warnings about unused
kvm_read_and_reset_pf_reason if included without CONFIG_KVM_GUEST
enabled.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
13 years agoKVM: Move KVM context switch into own function
Andi Kleen [Wed, 20 Oct 2010 15:56:17 +0000 (17:56 +0200)]
KVM: Move KVM context switch into own function

gcc 4.5 with some special options is able to duplicate the VMX
context switch asm in vmx_vcpu_run(). This results in a compile error
because the inline asm sequence uses an on local label. The non local
label is needed because other code wants to set up the return address.

This patch moves the asm code into an own function and marks
that explicitely noinline to avoid this problem.

Better would be probably to just move it into an .S file.

The diff looks worse than the change really is, it's all just
code movement and no logic change.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
13 years agoKVM: x86: Mark kvm_arch_setup_async_pf static
Jan Kiszka [Wed, 20 Oct 2010 13:18:02 +0000 (15:18 +0200)]
KVM: x86: Mark kvm_arch_setup_async_pf static

It has no user outside mmu.c and also no prototype.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
13 years agoKVM: improve hva_to_pfn() readability
Gleb Natapov [Tue, 19 Oct 2010 16:13:41 +0000 (18:13 +0200)]
KVM: improve hva_to_pfn() readability

Improve vma handling code readability in hva_to_pfn() and fix
async pf handling code to properly check vma returned by find_vma().

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
13 years agoKVM: Send async PF when guest is not in userspace too.
Gleb Natapov [Thu, 14 Oct 2010 09:22:56 +0000 (11:22 +0200)]
KVM: Send async PF when guest is not in userspace too.

If guest indicates that it can handle async pf in kernel mode too send
it, but only if interrupts are enabled.

Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
13 years agoKVM: Let host know whether the guest can handle async PF in non-userspace context.
Gleb Natapov [Thu, 14 Oct 2010 09:22:55 +0000 (11:22 +0200)]
KVM: Let host know whether the guest can handle async PF in non-userspace context.

If guest can detect that it runs in non-preemptable context it can
handle async PFs at any time, so let host know that it can send async
PF even if guest cpu is not in userspace.

Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
13 years agoKVM paravirt: Handle async PF in non preemptable context
Gleb Natapov [Thu, 14 Oct 2010 09:22:54 +0000 (11:22 +0200)]
KVM paravirt: Handle async PF in non preemptable context

If async page fault is received by idle task or when preemp_count is
not zero guest cannot reschedule, so do sti; hlt and wait for page to be
ready. vcpu can still process interrupts while it waits for the page to
be ready.

Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
13 years agoKVM: Inject asynchronous page fault into a PV guest if page is swapped out.
Gleb Natapov [Thu, 14 Oct 2010 09:22:53 +0000 (11:22 +0200)]
KVM: Inject asynchronous page fault into a PV guest if page is swapped out.

Send async page fault to a PV guest if it accesses swapped out memory.
Guest will choose another task to run upon receiving the fault.

Allow async page fault injection only when guest is in user mode since
otherwise guest may be in non-sleepable context and will not be able
to reschedule.

Vcpu will be halted if guest will fault on the same page again or if
vcpu executes kernel code.

Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
13 years agoKVM: Handle async PF in a guest.
Gleb Natapov [Thu, 14 Oct 2010 09:22:52 +0000 (11:22 +0200)]
KVM: Handle async PF in a guest.

When async PF capability is detected hook up special page fault handler
that will handle async page fault events and bypass other page faults to
regular page fault handler. Also add async PF handling to nested SVM
emulation. Async PF always generates exit to L1 where vcpu thread will
be scheduled out until page is available.

Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
13 years agoKVM paravirt: Add async PF initialization to PV guest.
Gleb Natapov [Thu, 14 Oct 2010 09:22:51 +0000 (11:22 +0200)]
KVM paravirt: Add async PF initialization to PV guest.

Enable async PF in a guest if async PF capability is discovered.

Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
13 years agoKVM: Add PV MSR to enable asynchronous page faults delivery.
Gleb Natapov [Thu, 14 Oct 2010 09:22:50 +0000 (11:22 +0200)]
KVM: Add PV MSR to enable asynchronous page faults delivery.

Guest enables async PF vcpu functionality using this MSR.

Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
13 years agoKVM paravirt: Move kvm_smp_prepare_boot_cpu() from kvmclock.c to kvm.c.
Gleb Natapov [Thu, 14 Oct 2010 09:22:49 +0000 (11:22 +0200)]
KVM paravirt: Move kvm_smp_prepare_boot_cpu() from kvmclock.c to kvm.c.

Async PF also needs to hook into smp_prepare_boot_cpu so move the hook
into generic code.

Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
13 years agoKVM: Add memory slot versioning and use it to provide fast guest write interface
Gleb Natapov [Mon, 18 Oct 2010 13:22:23 +0000 (15:22 +0200)]
KVM: Add memory slot versioning and use it to provide fast guest write interface

Keep track of memslots changes by keeping generation number in memslots
structure. Provide kvm_write_guest_cached() function that skips
gfn_to_hva() translation if memslots was not changed since previous
invocation.

Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
13 years agoKVM: Retry fault before vmentry
Gleb Natapov [Sun, 17 Oct 2010 16:13:42 +0000 (18:13 +0200)]
KVM: Retry fault before vmentry

When page is swapped in it is mapped into guest memory only after guest
tries to access it again and generate another fault. To save this fault
we can map it immediately since we know that guest is going to access
the page. Do it only when tdp is enabled for now. Shadow paging case is
more complicated. CR[034] and EFER registers should be switched before
doing mapping and then switched back.

Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
13 years agoKVM: Halt vcpu if page it tries to access is swapped out
Gleb Natapov [Thu, 14 Oct 2010 09:22:46 +0000 (11:22 +0200)]
KVM: Halt vcpu if page it tries to access is swapped out

If a guest accesses swapped out memory do not swap it in from vcpu thread
context. Schedule work to do swapping and put vcpu into halted state
instead.

Interrupts will still be delivered to the guest and if interrupt will
cause reschedule guest will continue to run another task.

[avi: remove call to get_user_pages_noio(), nacked by Linus; this
      makes everything synchrnous again]

Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
13 years agoKVM: Don't reset mmu context unnecessarily when updating EFER
Avi Kivity [Mon, 11 Oct 2010 12:23:39 +0000 (14:23 +0200)]
KVM: Don't reset mmu context unnecessarily when updating EFER

The only bit of EFER that affects the mmu is NX, and this is already
accounted for (LME only takes effect when changing cr0).

Based on a patch by Hillf Danton.

Signed-off-by: Avi Kivity <avi@redhat.com>
13 years agoKVM: i8259: initialize isr_ack
Avi Kivity [Fri, 31 Dec 2010 08:52:15 +0000 (10:52 +0200)]
KVM: i8259: initialize isr_ack

isr_ack is never initialized.  So, until the first PIC reset, interrupts
may fail to be injected.  This can cause Windows XP to fail to boot, as
reported in the fallout from the fix to
https://bugzilla.kernel.org/show_bug.cgi?id=21962.

Reported-and-tested-by: Nicolas Prochazka <prochazka.nicolas@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
13 years agoKVM: MMU: Fix incorrect direct gfn for unpaged mode shadow
Avi Kivity [Tue, 28 Dec 2010 10:09:07 +0000 (12:09 +0200)]
KVM: MMU: Fix incorrect direct gfn for unpaged mode shadow

We use the physical address instead of the base gfn for the four
PAE page directories we use in unpaged mode.  When the guest accesses
an address above 1GB that is backed by a large host page, a BUG_ON()
in kvm_mmu_set_gfn() triggers.

Resolves: https://bugzilla.kernel.org/show_bug.cgi?id=21962
Reported-and-tested-by: Nicolas Prochazka <prochazka.nicolas@gmail.com>
KVM-Stable-Tag.
Signed-off-by: Avi Kivity <avi@redhat.com>
13 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile
Linus Torvalds [Sat, 18 Dec 2010 18:28:54 +0000 (10:28 -0800)]
Merge git://git./linux/kernel/git/cmetcalf/linux-tile

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  arch/tile: handle rt_sigreturn() more cleanly
  arch/tile: handle CLONE_SETTLS in copy_thread(), not user space

13 years agoMerge branch 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus
Linus Torvalds [Sat, 18 Dec 2010 18:23:29 +0000 (10:23 -0800)]
Merge branch 'upstream' of git://git.linux-mips.org/upstream-linus

* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus:
  MIPS: Fix build errors in sc-mips.c

13 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes...
Linus Torvalds [Sat, 18 Dec 2010 18:13:24 +0000 (10:13 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jbarnes/pci-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  x86: avoid high BIOS area when allocating address space
  x86: avoid E820 regions when allocating address space
  x86: avoid low BIOS area when allocating address space
  resources: add arch hook for preventing allocation in reserved areas
  Revert "resources: support allocating space within a region from the top down"
  Revert "PCI: allocate bus resources from the top down"
  Revert "x86/PCI: allocate space from the end of a region, not the beginning"
  Revert "x86: allocate space within a region top-down"
  Revert "PCI: fix pci_bus_alloc_resource() hang, prefer positive decode"
  PCI: Update MCP55 quirk to not affect non HyperTransport variants

13 years agoarch/tile: handle rt_sigreturn() more cleanly
Chris Metcalf [Tue, 14 Dec 2010 21:07:25 +0000 (16:07 -0500)]
arch/tile: handle rt_sigreturn() more cleanly

The current tile rt_sigreturn() syscall pattern uses the common idiom
of loading up pt_regs with all the saved registers from the time of
the signal, then anticipating the fact that we will clobber the ABI
"return value" register (r0) as we return from the syscall by setting
the rt_sigreturn return value to whatever random value was in the pt_regs
for r0.

However, this breaks in our 64-bit kernel when running "compat" tasks,
since we always sign-extend the "return value" register to properly
handle returned pointers that are in the upper 2GB of the 32-bit compat
address space.  Doing this to the sigreturn path then causes occasional
random corruption of the 64-bit r0 register.

Instead, we stop doing the crazy "load the return-value register"
hack in sigreturn.  We already have some sigreturn-specific assembly
code that we use to pass the pt_regs pointer to C code.  We extend that
code to also set the link register to point to a spot a few instructions
after the usual syscall return address so we don't clobber the saved r0.
Now it no longer matters what the rt_sigreturn syscall returns, and the
pt_regs structure can be cleanly and completely reloaded.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
13 years agoarch/tile: handle CLONE_SETTLS in copy_thread(), not user space
Chris Metcalf [Tue, 14 Dec 2010 20:57:49 +0000 (15:57 -0500)]
arch/tile: handle CLONE_SETTLS in copy_thread(), not user space

Previously we were just setting up the "tp" register in the
new task as started by clone() in libc.  However, this is not
quite right, since in principle a signal might be delivered to
the new task before it had its TLS set up.  (Of course, this race
window still exists for resetting the libc getpid() cached value
in the new task, in principle.  But in any case, we are now doing
this exactly the way all other architectures do it.)

This change is important for 2.6.37 since the tile glibc we will
be submitting upstream will not set TLS in user space any more,
so it will only work on a kernel that has this fix.  It should
also be taken for 2.6.36.x in the stable tree if possible.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Cc: stable <stable@kernel.org>
13 years agoMIPS: Fix build errors in sc-mips.c
Kevin Cernekee [Wed, 3 Nov 2010 05:28:01 +0000 (22:28 -0700)]
MIPS: Fix build errors in sc-mips.c

Seen with malta_defconfig on Linus' tree:

  CC      arch/mips/mm/sc-mips.o
arch/mips/mm/sc-mips.c: In function 'mips_sc_is_activated':
arch/mips/mm/sc-mips.c:77: error: 'config2' undeclared (first use in this function)
arch/mips/mm/sc-mips.c:77: error: (Each undeclared identifier is reported only once
arch/mips/mm/sc-mips.c:77: error: for each function it appears in.)
arch/mips/mm/sc-mips.c:81: error: 'tmp' undeclared (first use in this function)
make[2]: *** [arch/mips/mm/sc-mips.o] Error 1
make[1]: *** [arch/mips/mm] Error 2
make: *** [arch/mips] Error 2

[Ralf: Cosmetic changes to minimize the number of arguments passed to
mips_sc_is_activated]

Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/1752/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
13 years agox86: avoid high BIOS area when allocating address space
Bjorn Helgaas [Thu, 16 Dec 2010 17:39:02 +0000 (10:39 -0700)]
x86: avoid high BIOS area when allocating address space

This prevents allocation of the last 2MB before 4GB.

The experiment described here shows Windows 7 ignoring the last 1MB:
https://bugzilla.kernel.org/show_bug.cgi?id=23542#c27

This patch ignores the top 2MB instead of just 1MB because H. Peter Anvin
says "There will be ROM at the top of the 32-bit address space; it's a fact
of the architecture, and on at least older systems it was common to have a
shadow 1 MiB below."

Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
13 years agox86: avoid E820 regions when allocating address space
Bjorn Helgaas [Thu, 16 Dec 2010 17:38:56 +0000 (10:38 -0700)]
x86: avoid E820 regions when allocating address space

When we allocate address space, e.g., to assign it to a PCI device, don't
allocate anything mentioned in the BIOS E820 memory map.

On recent machines (2008 and newer), we assign PCI resources from the
windows described by the ACPI PCI host bridge _CRS.  On many Dell
machines, these windows overlap some E820 reserved areas, e.g.,

    BIOS-e820: 00000000bfe4dc00 - 00000000c0000000 (reserved)
    pci_root PNP0A03:00: host bridge window [mem 0xbff00000-0xdfffffff]

If we put devices at 0xbff00000, they don't work, probably because
that's really RAM, not I/O memory.  This patch prevents that by removing
the 0xbfe4dc00-0xbfffffff area from the "available" resource.

I'm not very happy with this solution because Windows solves the problem
differently (it seems to ignore E820 reserved areas and it allocates
top-down instead of bottom-up; details at comment 45 of the bugzilla
below).  That means we're vulnerable to BIOS defects that Windows would not
trip over.  For example, if BIOS described a device in ACPI but didn't
mention it in E820, Windows would work fine but Linux would fail.

Reference: https://bugzilla.kernel.org/show_bug.cgi?id=16228
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
13 years agox86: avoid low BIOS area when allocating address space
Bjorn Helgaas [Thu, 16 Dec 2010 17:38:51 +0000 (10:38 -0700)]
x86: avoid low BIOS area when allocating address space

This implements arch_remove_reservations() so allocate_resource() can
avoid any arch-specific reserved areas.  This currently just avoids the
BIOS area (the first 1MB), but could be used for E820 reserved areas if
that turns out to be necessary.

We previously avoided this area in pcibios_align_resource().  This patch
moves the test from that PCI-specific path to a generic path, so *all*
resource allocations will avoid this area.

Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
13 years agoresources: add arch hook for preventing allocation in reserved areas
Bjorn Helgaas [Thu, 16 Dec 2010 17:38:46 +0000 (10:38 -0700)]
resources: add arch hook for preventing allocation in reserved areas

This adds arch_remove_reservations(), which an arch can implement if it
needs to protect part of the address space from allocation.

Sometimes that can be done by just putting a region in the resource tree,
but there are cases where that doesn't work well.  For example, x86 BIOS
E820 reservations are not related to devices, so they may overlap part of,
all of, or more than a device resource, so they may not end up at the
correct spot in the resource tree.

Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
13 years agoRevert "resources: support allocating space within a region from the top down"
Bjorn Helgaas [Thu, 16 Dec 2010 17:38:41 +0000 (10:38 -0700)]
Revert "resources: support allocating space within a region from the top down"

This reverts commit e7f8567db9a7f6b3151b0b275e245c1cef0d9c70.

Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
13 years agoRevert "PCI: allocate bus resources from the top down"
Bjorn Helgaas [Thu, 16 Dec 2010 17:38:36 +0000 (10:38 -0700)]
Revert "PCI: allocate bus resources from the top down"

This reverts commit b126b4703afa4010b161784a43650337676dd03b.

We're going back to the old behavior of allocating from bus resources
in _CRS order.

Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
13 years agoRevert "x86/PCI: allocate space from the end of a region, not the beginning"
Bjorn Helgaas [Thu, 16 Dec 2010 17:38:31 +0000 (10:38 -0700)]
Revert "x86/PCI: allocate space from the end of a region, not the beginning"

This reverts commit dc9887dc02e37bcf83f4e792aa14b07782ef54cf.

Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
13 years agoRevert "x86: allocate space within a region top-down"
Bjorn Helgaas [Thu, 16 Dec 2010 17:38:25 +0000 (10:38 -0700)]
Revert "x86: allocate space within a region top-down"

This reverts commit 1af3c2e45e7a641e774bbb84fa428f2f0bf2d9c9.

Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
13 years agoRevert "PCI: fix pci_bus_alloc_resource() hang, prefer positive decode"
Bjorn Helgaas [Thu, 16 Dec 2010 17:38:20 +0000 (10:38 -0700)]
Revert "PCI: fix pci_bus_alloc_resource() hang, prefer positive decode"

This reverts commit 82e3e767c21fef2b1b38868e20eb4e470a1e38e3.

We're going back to considering bus resources in the order we found
them (in _CRS order, when we're using _CRS), so we don't need to
define any ordering.

Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
13 years agoMerge branch 'for_linus' of git://github.com/at91linux/linux-2.6-at91
Linus Torvalds [Fri, 17 Dec 2010 17:45:25 +0000 (09:45 -0800)]
Merge branch 'for_linus' of git://github.com/at91linux/linux-2.6-at91

* 'for_linus' of git://github.com/at91linux/linux-2.6-at91:
  at91: Refactor Stamp9G20 and PControl G20 board file
  at91: Fix uhpck clock rate in upll case

13 years agoMerge branch 'kvm-updates/2.6.37' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Linus Torvalds [Fri, 17 Dec 2010 17:32:39 +0000 (09:32 -0800)]
Merge branch 'kvm-updates/2.6.37' of git://git./virt/kvm/kvm

* 'kvm-updates/2.6.37' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: Fix preemption counter leak in kvm_timer_init()
  KVM: enlarge number of possible CPUID leaves
  KVM: SVM: Do not report xsave in supported cpuid
  KVM: Fix OSXSAVE after migration

13 years agoMerge branch 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspe...
Linus Torvalds [Fri, 17 Dec 2010 17:31:59 +0000 (09:31 -0800)]
Merge branch 'pm-fixes' of git://git./linux/kernel/git/rafael/suspend-2.6

* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  PM / Runtime: Fix pm_runtime_suspended()
  PM / Hibernate: Restore old swap signature to avoid user space breakage
  PM / Hibernate: Fix PM_POST_* notification with user-space suspend

13 years agoMerge branch 'bkl_removal' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab...
Linus Torvalds [Fri, 17 Dec 2010 17:28:17 +0000 (09:28 -0800)]
Merge branch 'bkl_removal' of git://git./linux/kernel/git/mchehab/linux-2.6

* 'bkl_removal' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6:
  [media] uvcvideo: Convert to unlocked_ioctl
  [media] uvcvideo: Lock stream mutex when accessing format-related information
  [media] uvcvideo: Move mmap() handler to uvc_queue.c
  [media] uvcvideo: Move mutex lock/unlock inside uvc_free_buffers
  [media] uvcvideo: Lock controls mutex when querying menus
  [media] v4l2-dev: fix race condition
  [media] V4L: improve the BKL replacement heuristic
  [media] v4l2-dev: use mutex_lock_interruptible instead of plain mutex_lock
  [media] cx18: convert to unlocked_ioctl
  [media] radio-timb: convert to unlocked_ioctl
  [media] sh_vou: convert to unlocked_ioctl
  [media] cafe_ccic: replace ioctl by unlocked_ioctl
  [media] et61x251_core: trivial conversion to unlocked_ioctl
  [media] sn9c102: convert to unlocked_ioctl
  [media] BKL: trivial ioctl -> unlocked_ioctl video driver conversions
  [media] typhoon: convert to unlocked_ioctl
  [media] si4713: convert to unlocked_ioctl
  [media] tea5764: convert to unlocked_ioctl
  [media] cadet: use unlocked_ioctl
  [media] BKL: trivial BKL removal from V4L2 radio drivers

13 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Fri, 17 Dec 2010 17:27:30 +0000 (09:27 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Fix conflict of Mic Boot controls
  ALSA: HDA: Enable subwoofer on Asus G73Jw
  ALSA: HDA: Fix auto-mute on Lenovo Edge 14
  ASoC: Fix bias power down of non-DAPM codec
  ASoC: WM8580: Fix R8 initial value
  ASoC: fix deemphasis control in wm8904/55/60 codecs

13 years agoMerge branch 'fix/asoc' into for-linus
Takashi Iwai [Fri, 17 Dec 2010 14:28:37 +0000 (15:28 +0100)]
Merge branch 'fix/asoc' into for-linus

13 years agoMerge branch 'fix/hda' into for-linus
Takashi Iwai [Fri, 17 Dec 2010 14:28:33 +0000 (15:28 +0100)]
Merge branch 'fix/hda' into for-linus

13 years agoALSA: hda - Fix conflict of Mic Boot controls
Takashi Iwai [Fri, 17 Dec 2010 14:23:41 +0000 (15:23 +0100)]
ALSA: hda - Fix conflict of Mic Boot controls

Due to the recent change for multiple mics assignment, we need to handle
the index of each Mic Boost control respectively.  Otherwise the driver
gets the control element conflicts, and gives the unsable state.

Reference: kernel bug 25002
https://bugzilla.kernel.org/show_bug.cgi?id=25002

Reported-and-tested-by: Adam Williamson <awilliam@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
13 years agoat91: Refactor Stamp9G20 and PControl G20 board file
Christian Glindkamp [Thu, 9 Dec 2010 10:15:59 +0000 (11:15 +0100)]
at91: Refactor Stamp9G20 and PControl G20 board file

As PControl G20 is a carrier board for the Stamp9G20 SoM, some code can
be shared. Therefore board-stamp9g20.c is refactored to allow reusing the
SoM initialization and board-pcontrol-g20.c is modified to use it.

Signed-off-by: Christian Glindkamp <christian.glindkamp@taskit.de>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
13 years agoat91: Fix uhpck clock rate in upll case
Ryan Mallon [Wed, 2 Jun 2010 00:55:36 +0000 (12:55 +1200)]
at91: Fix uhpck clock rate in upll case

The uhpck clock should be divided from the utmi clock, not its parent
(main). This change is mostly cosmetic as the uhpck rate value is not
used anywhere except for the debugfs clock output.

Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
14 years agoMerge branch 'for-linus' of git://git.infradead.org/users/eparis/notify
Linus Torvalds [Thu, 16 Dec 2010 23:45:49 +0000 (15:45 -0800)]
Merge branch 'for-linus' of git://git.infradead.org/users/eparis/notify

* 'for-linus' of git://git.infradead.org/users/eparis/notify:
  fanotify: fill in the metadata_len field on struct fanotify_event_metadata
  fanotify: split version into version and metadata_len
  fanotify: Dont try to open a file descriptor for the overflow event
  fanotify: Introduce FAN_NOFD
  fanotify: do not leak user reference on allocation failure
  inotify: stop kernel memory leak on file creation failure
  fanotify: on group destroy allow all waiters to bypass permission check
  fanotify: Dont allow a mask of 0 if setting or removing a mark
  fanotify: correct broken ref counting in case adding a mark failed
  fanotify: if set by user unset FMODE_NONOTIFY before fsnotify_perm() is called
  fanotify: remove packed from access response message
  fanotify: deny permissions when no event was sent

14 years agoMerge branch 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus
Linus Torvalds [Thu, 16 Dec 2010 23:45:25 +0000 (15:45 -0800)]
Merge branch 'upstream' of git://git.linux-mips.org/upstream-linus

* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (28 commits)
  MIPS: Add a CONFIG_FORCE_MAX_ZONEORDER Kconfig option.
  MIPS: LD/SD o32 macro GAS fix update
  MIPS: Alchemy: fix build with SERIAL_8250=n
  MIPS: Rename mips_dma_cache_sync back to dma_cache_sync
  MIPS: MT: Fix typo in comment.
  SSB: Fix nvram_get on BCM47xx platform
  MIPS: BCM47xx: Swap serial console if ttyS1 was specified.
  MIPS: BCM47xx: Use sscanf for parsing mac address
  MIPS: BCM47xx: Fill values for b43 into SSB sprom
  MIPS: BCM47xx: Do not read config from CFE
  MIPS: FDT size is a be32
  MIPS: Fix CP0 COUNTER clockevent race
  MIPS: Fix regression on BCM4710 processor detection
  MIPS: JZ4740: Fix pcm device name
  MIPS: Separate two consecutive loads in memset.S
  MIPS: Send proper signal and siginfo on FP emulator faults.
  MIPS: AR7: Fix loops per jiffies on TNETD7200 devices
  MIPS: AR7: Fix double ar7_gpio_init declaration
  MIPS: Rework GENERIC_HARDIRQS Kconfig.
  MIPS: Alchemy: Add return value check for strict_strtoul()
  ...

14 years agoPCI: Update MCP55 quirk to not affect non HyperTransport variants
Neil Horman [Wed, 8 Dec 2010 14:47:48 +0000 (09:47 -0500)]
PCI: Update MCP55 quirk to not affect non HyperTransport variants

I wrote this quirk awhile ago to properly setup MCP55 chips on hypertransport
busses so that interrupts reached whatever cpu happend to boot the kdump kernel.
while that works well, it was recently shown to me that a a non-hypertransport
variant of the MCP55 exists, and on those system the register that this quirk
manipulates causes hangs if you write to it.  Since the quirk was only meant to
handle errors found on MCP55 chips that have a HT interface, this patch adds a
filter to make sure the chip is an HT capable before making the needed register
adjustment.  This lets the broken MCP55s work with kdump while not breaking the
non-HT variants.

Resolves https://bugzilla.kernel.org/show_bug.cgi?id=23952

Tested successfully by the reporter and myself.

Cc: stable@kernel.org
Reported-by: Mathieu BĂ©rard <mathieu@mberard.eu>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
14 years agoMIPS: Add a CONFIG_FORCE_MAX_ZONEORDER Kconfig option.
David Daney [Mon, 11 Oct 2010 21:52:45 +0000 (14:52 -0700)]
MIPS: Add a CONFIG_FORCE_MAX_ZONEORDER Kconfig option.

For huge page support with base page size of 16K or 32K, we have to
increase the MAX_ORDER so that huge pages can be allocated.

[Ralf: I don't think a user should have to configure obscure constants like
this but for the time being this will have to suffice.]

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1685/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years agoMIPS: LD/SD o32 macro GAS fix update
Maciej W. Rozycki [Sun, 10 Oct 2010 09:42:12 +0000 (10:42 +0100)]
MIPS: LD/SD o32 macro GAS fix update

I am about to commit:

http://sourceware.org/ml/binutils/2010-10/msg00033.html

that fixes a problem with the LD/SD macro currently implemented by GAS for
the o32 ABI in an inconsistent way.  This is best illustrated with a
simple program, which I'm copying here from the message above for easier
reference:

$ cat ld.s
ld $5,32767($4)
ld $5,32768($4)

This gets assebled into the following output:

$ mips-linux-as -32 -mips3 -o ld.o ld.s
$ mips-linux-objdump -d ld.o

ld.o:     file format elf32-tradbigmips

Disassembly of section .text:

00000000 <.text>:
   0: dc857fff  ld a1,32767(a0)
   4: 3c010001  lui at,0x1
   8: 00810821  addu at,a0,at
   c: 8c258000  lw a1,-32768(at)
  10: 8c268004  lw a2,-32764(at)
...

Oops!

 The GAS fix makes the macro behave in a consistent way and pairs of LW/SW
instructions to be output as appropriate regardless of the size of the
offset associated with the address used.  The machine instruction is still
available, but to reach it macros have to be disabled first.  This has a
side effect of requiring the use of a machine-addressable memory operand.

 As some platforms require 64-bit operations for accesses to some I/O
registers LD/SD instructions are used in a couple of places in Linux
regardless of the ABI selected.  Here's a fix for some pieces of code
affected I've been able to track down.  The fix should be backwards
compatible with all supported binutils releases in existence and can be
used as a reference for any other places or off-tree code.  The use of the
"R" constraint guarantees a machine-addressable operand.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1680/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years agoMIPS: Alchemy: fix build with SERIAL_8250=n
Manuel Lauss [Mon, 25 Oct 2010 16:44:11 +0000 (18:44 +0200)]
MIPS: Alchemy: fix build with SERIAL_8250=n

In commit 7d172bfe ("Alchemy: Add UART PM methods") I introduced
platform PM methods which call a function of the 8250 driver;
this patch works around link failures when the kernel is built
without 8250 support.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/1737/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years agoMIPS: Rename mips_dma_cache_sync back to dma_cache_sync
Ralf Baechle [Thu, 9 Dec 2010 19:14:09 +0000 (19:14 +0000)]
MIPS: Rename mips_dma_cache_sync back to dma_cache_sync

This fixes IP22 and IP28 build errors.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years agoMIPS: MT: Fix typo in comment.
Ralf Baechle [Wed, 1 Dec 2010 17:33:17 +0000 (17:33 +0000)]
MIPS: MT: Fix typo in comment.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years agoSSB: Fix nvram_get on BCM47xx platform
Hauke Mehrtens [Sat, 27 Nov 2010 18:26:32 +0000 (19:26 +0100)]
SSB: Fix nvram_get on BCM47xx platform

The nvram_get function was never in the mainline kernel, it only existed in
an external OpenWrt patch. Use nvram_getenv function, which is in mainline
and use an include instead of an extra function declaration.  et0macaddr
contains the mac address in text from like 00:11:22:33:44:55. We have to
parse it before adding it into macaddr.

nvram_parse_macaddr will be merged into asm/mach-bcm47xx/nvram.h through
the MIPS git tree and will be available soon. It will not build now without
nvram_parse_macaddr, but it hasn't before either.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
To: linux-mips@linux-mips.org
Cc: mb@bu3sch.de
Cc: netdev@vger.kernel.org
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Michael Buesch <mb@bu3sch.de>
Patchwork: https://patchwork.linux-mips.org/patch/1849/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years agoMIPS: BCM47xx: Swap serial console if ttyS1 was specified.
Hauke Mehrtens [Sat, 27 Nov 2010 16:46:01 +0000 (17:46 +0100)]
MIPS: BCM47xx: Swap serial console if ttyS1 was specified.

Some devices like the Netgear WGT634U are using ttyS1 for default console
output. We should switch to that console if it was given in the kernel_args
parameters.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
To: linux-mips@linux-mips.org
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Patchwork: https://patchwork.linux-mips.org/patch/1848/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years agoMIPS: BCM47xx: Use sscanf for parsing mac address
Hauke Mehrtens [Sat, 27 Nov 2010 16:46:00 +0000 (17:46 +0100)]
MIPS: BCM47xx: Use sscanf for parsing mac address

Instead of writing own function for parsing the mac address we now
use sscanf.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
To: linux-mips@linux-mips.org
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Patchwork: https://patchwork.linux-mips.org/patch/1847/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years agoMIPS: BCM47xx: Fill values for b43 into SSB sprom
Hauke Mehrtens [Sat, 27 Nov 2010 16:45:59 +0000 (17:45 +0100)]
MIPS: BCM47xx: Fill values for b43 into SSB sprom

Fill the sprom with all available values from the nvram. Most of these
new values are needed for the b43 or b43legacy driver.

Parts of this patch have been in OpenWRT for a long time and were written
by Michael Buesch.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
To: linux-mips@linux-mips.org
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Patchwork: https://patchwork.linux-mips.org/patch/1846/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years agoMIPS: BCM47xx: Do not read config from CFE
Hauke Mehrtens [Sat, 27 Nov 2010 16:45:58 +0000 (17:45 +0100)]
MIPS: BCM47xx: Do not read config from CFE

The config options read out here are not stored in CFE but only in NVRAM on
the devices. Remove reading from CFE and only access the NVRAM.  Reading out
CFE does not harm but is useless here.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
To: linux-mips@linux-mips.org
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Patchwork: https://patchwork.linux-mips.org/patch/1845/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years agoMIPS: FDT size is a be32
Thomas Chou [Wed, 24 Nov 2010 07:35:48 +0000 (15:35 +0800)]
MIPS: FDT size is a be32

The totalsize field was be32. And the reserve bootmem would cause failure.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
To: devicetree-discuss@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: grant.likely@secretlab.ca
Cc: David Daney <ddaney@caviumnetworks.com>
Cc: Dezhong Diao <dediao@cisco.com>
Patchwork: https://patchwork.linux-mips.org/patch/1838/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years agoMIPS: Fix CP0 COUNTER clockevent race
Kevin Cernekee [Tue, 23 Nov 2010 18:26:44 +0000 (10:26 -0800)]
MIPS: Fix CP0 COUNTER clockevent race

Consider the following test case:

write_c0_compare(read_c0_count());

Even if the counter doesn't increment during execution, this might not
generate an interrupt until the counter wraps around.  The CPU may
perform the comparison each time CP0 COUNT increments, not when CP0
COMPARE is written.

If mips_next_event() is called with a very small delta, and CP0 COUNT
increments during the calculation of "cnt += delta", it is possible
that CP0 COMPARE will be written with the current value of CP0 COUNT.
If this is detected, the function should return -ETIME, to indicate
that the interrupt might not have actually gotten scheduled.

Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1836/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years agoMIPS: Fix regression on BCM4710 processor detection
Kevin Cernekee [Tue, 23 Nov 2010 18:26:45 +0000 (10:26 -0800)]
MIPS: Fix regression on BCM4710 processor detection

BCM4710 uses the BMIPS32 core (like BCM6345), not the MIPS 4Kc core as
was previously believed.

Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Tested-by: Alexandros C. Couloumbis <alex@ozo.com>
Patchwork: https://patchwork.linux-mips.org/patch/1837/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years agoMIPS: JZ4740: Fix pcm device name
Lars-Peter Clausen [Thu, 11 Nov 2010 18:08:52 +0000 (19:08 +0100)]
MIPS: JZ4740: Fix pcm device name

As part the ASoC multi-component patch (commit f0fba2ad) the jz4740 pcm
driver was renamed to 'jz4740-pcm-audio'. Adjust the device name
accordingly.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1770/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years agoMIPS: Separate two consecutive loads in memset.S
Tony Wu [Wed, 10 Nov 2010 13:48:15 +0000 (21:48 +0800)]
MIPS: Separate two consecutive loads in memset.S

partial_fixup is used in noreorder block.

Separating two consecutive loads can save one cycle on processors with
GPR intrelock and can fix load-use on processors that need a load delay slot.

Also do so for fwd_fixup.

[Ralf: Only R2000/R3000 class processors are lacking the the load-user
interlock and even some of those got it retrofitted.  With R2000/R3000
being fairly uncommon these days the impact of this bug should be minor.]

Signed-off-by: Tony Wu <tung7970@gmail.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1768/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years agoMIPS: Send proper signal and siginfo on FP emulator faults.
David Daney [Thu, 21 Oct 2010 23:32:26 +0000 (16:32 -0700)]
MIPS: Send proper signal and siginfo on FP emulator faults.

We were unconditionally sending SIGBUS with an empty siginfo on FP
emulator faults.  This differs from what happens when real floating
point hardware would get a fault.

For most faults we need to send SIGSEGV with the faulting address
filled in in the struct siginfo.

Reported-by: Camm Maguire <camm@maguirefamily.org>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Cc: Camm Maguire <camm@maguirefamily.org>
Patchwork: https://patchwork.linux-mips.org/patch/1727/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years agoMIPS: AR7: Fix loops per jiffies on TNETD7200 devices
Florian Fainelli [Sun, 31 Oct 2010 22:49:58 +0000 (23:49 +0100)]
MIPS: AR7: Fix loops per jiffies on TNETD7200 devices

TNETD7200 run their CPU clock faster than the default CPU clock we assume.
In order to have the correct loops per jiffies settings, initialize clocks right
before setting mips_hpt_frequency. As a side effect, we can no longer use
msleep in clocks.c which requires other parts of the kernel to be initialized,
so replace these with mdelay.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1749/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years agoMIPS: AR7: Fix double ar7_gpio_init declaration
Florian Fainelli [Sun, 31 Oct 2010 22:49:57 +0000 (23:49 +0100)]
MIPS: AR7: Fix double ar7_gpio_init declaration

Signed-off-by: Florian Fainelli <florian@openwrt.org>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1748/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years agoMIPS: Rework GENERIC_HARDIRQS Kconfig.
David Daney [Fri, 5 Nov 2010 22:12:48 +0000 (15:12 -0700)]
MIPS: Rework GENERIC_HARDIRQS Kconfig.

Recent changes to CONFIG_GENERIC_HARDIRQS have caused us to start getting:

warning: (SMP && SYS_SUPPORTS_SMP) selects IRQ_PER_CPU which has unmet direct dependencies (HAVE_GENERIC_HARDIRQS)

Rearranging our Kconfig quiets the message.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Patchwork: https://patchwork.linux-mips.org/patch/1757/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>