[PATCH] sched: fix newly idle load balance in case of SMT

In the presence of SMT, newly idle balance was never happening for
multi-core and SMP domains (even when both the logical siblings are
idle).

If thread 0 is already idle and when thread 1 is about to go to idle,
newly idle load balance always think that one of the threads is not idle
and skips doing the newly idle load balance for multi-core and SMP
domains.

This is because of the idle_cpu() macro, which checks if the current
process on a cpu is an idle process. But this is not the case for the
thread doing the load_balance_newidle().

Fix this by using runqueue's nr_running field instead of idle_cpu(). And
also skip the logic of 'only one idle cpu in the group will be doing
load balancing' during newly idle case.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

[PATCH] sched: sched_cacheflush is now unused

Since Ingo's recent scheduler rewrite which was merged as commit
0437e109e1841607f2988891eaa36c531c6aa6ac sched_cacheflush is unused.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Merge branch 'master' of /linux/kernel/git/davem/net-2.6

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (25 commits)
  [TG3]: Fix msi issue with kexec/kdump.
  [NET] XFRM: Fix whitespace errors.
  [NET] TIPC: Fix whitespace errors.
  [NET] SUNRPC: Fix whitespace errors.
  [NET] SCTP: Fix whitespace errors.
  [NET] RXRPC: Fix whitespace errors.
  [NET] ROSE: Fix whitespace errors.
  [NET] RFKILL: Fix whitespace errors.
  [NET] PACKET: Fix whitespace errors.
  [NET] NETROM: Fix whitespace errors.
  [NET] NETFILTER: Fix whitespace errors.
  [NET] IPV4: Fix whitespace errors.
  [NET] DCCP: Fix whitespace errors.
  [NET] CORE: Fix whitespace errors.
  [NET] BLUETOOTH: Fix whitespace errors.
  [NET] AX25: Fix whitespace errors.
  [PATCH] mac80211: remove rtnl locking in ieee80211_sta.c
  [PATCH] mac80211: fix GCC warning on 64bit platforms
  [GENETLINK]: Dynamic multicast groups.
  [NETLIKN]: Allow removing multicast groups.
  ...

IDE: fix termination of non-fs requests

ide-disk calls

        ide_end_request(drive, 0, 0);

to finish an unknown request, but this doesn't work so well for non-fs
requests, since ide_end_request() internally looks at ->hard_cur_sectors
to see how much data to end. Only file system requests store a transfer
value in there, pc requests fill out ->data_len as a byte based transfer
value instead.

Since we ask to end 0 bytes of that request, it will never be terminated
and ide-disk gets stuck in a loop "handling" that same request over and
over.

Switch __ide_end_request() to take a byte based transfer count, and
adjust ide_end_request() to look at the right field to determine how
much IO to end when it's being passed in 0.

Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Tested-By: Giacomo Catenazzi <cate@debian.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

afs build fix

Bruce and David's patches clashed.

fs/afs/flock.c: In function 'afs_do_getlk':
fs/afs/flock.c:459: error: void value not ignored as it ought to be

Cc: "J. Bruce Fields" <bfields@fieldses.org>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel/sysctl.c: finish off the warning comments

I've been chasing these comments around this file all week.  Hopefully we're
straight now.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: add to edac docs

Updated the EDAC kernel documentation

Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Cc: Greg KH <greg@kroah.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: fix edac_device sysfs corner case bug

Some simple fixes to properly reference counter values from the block
attribute level of edac_device objects.  Properly sequencing the array pointer
was added, resulting in correct identification of block level attributes from
their base class functions.

Added more verbose debug statement for event tracking.

Also during some corner testing, found a bug in the store/show sequence
of operations for the block attribute/controls management.

An old intermediate structure for 'blocks' was still in the processing
pipeline.  This patch removes that old structure and correctly utilizes the
new struct edac_dev_sysfs_block_attribute for passing control from the sysfs
to the low level store/show function of the edac driver.

Now the proper kobj pointer to passed downward to the store/show
functions.

Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Cc: Greg KH <greg@kroah.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: add to maintainers new info

Update maintainer information on edac components

Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Cc: Greg KH <greg@kroah.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: new i82975x driver

New EDAC driver for the i82975x memory controller chipset Used on ASUS
motherboards

[akpm@linux-foundation.org: fix multiple coding-style bloopers]
Signed-off-by: <arvind@acarlab.com>
Signed-off-by: Ranganathan Desikan <rdesikan@jetzbroadband.com>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Cc: Greg KH <greg@kroah.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: fix workq reset deadlock

Fix mutex locking deadlock on the device controller linked list.  Was calling
a lock then a function that could call the same lock.  Moved the cancel workq
function to outside the lock

Added some short circuit logic in the workq code

Added comments of description

Code tidying

Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Cc: Greg KH <greg@kroah.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: code tidying on export-gpl

Change EXPORT_SYMBOLs to EXPORT_SYMBOLS_GPL
Tidy changes: blank lines, inline removal, add comment

Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Cc: Greg KH <greg@kroah.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: fix edac_device sysfs completion code

With feedback, this patch corrects operation of the kobject release operation
on kobjects, attributes and controls for the edac_device.

Cc: Alan Cox alan@lxorguk.ukuu.org.uk
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Acked-by: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: fix edac_mc sysfs completion code

This patch refactors the 'releasing' of kobjects for the edac_mc type of
device.  The correct pattern of kobject release is followed.

As internal kobjs are allocated they bump a ref count on the top level kobj.
It in turn has a module ref count on the edac_core module.  When internal
kobjects are released, they dec the ref count on the top level kobj.  When the
top level kobj reaches zero, it decrements the ref count on the edac_core
object, allow it to be unloaded, as all resources have all now been released.

Cc: Alan Cox alan@lxorguk.ukuu.org.uk
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Acked-by: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: fix edac_device init apis

Refactoring of sysfs code necessitated the refactoring of the
edac_device_alloc() and edac_device_add_device() apis, of moving the index
value to the alloc() function.  This patch alters the in tree drivers to
utilize this new api signature.

Having the index value performed later created a chicken-and-the-egg issue.
Moving it to the alloc() function allows for creating the necessary sysfs
entries with the proper index number

Cc: Alan Cox alan@lxorguk.ukuu.org.uk
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: fix edac_mc init apis

Refactoring of sysfs code necessitated the refactoring of the edac_mc_alloc()
and edac_mc_add_mc() apis, of moving the index value to the alloc() function.
This patch alters the in tree drivers to utilize this new api signature.

Having the index value performed later created a chicken-and-the-egg issue.
Moving it to the alloc() function allows for creating the necessary sysfs
entries with the proper index number

Cc: Alan Cox alan@lxorguk.ukuu.org.uk
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: fix leaf sysfs attribute

This patch fixes and enhances the driver level set of sysfs attributes that
can be added to the 'block' level of an edac_device type of driver.

There is a controller information structure, which contains one or more
instances of device.  Each instance will have one or more blocks of device
specific counters.  This patch fixes the ability to have more detailed
attributes/controls for each of the 'blocks', providing for the addition of
controls/attributes from the low level driver to user space via sysfs.

Cc: Alan Cox alan@lxorguk.ukuu.org.uk
Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: new pasemi driver

NEW EDAC driver for the memory controllers on PA Semi PA6T-1682M.

Changes since last submission:

* Rebased on top of 2.6.22-rc4-mm2 with the EDAC changes merged there.
* Minor checkpatch.pl cleanups
* Renamed ctl_name
* Added dev_name
* edac_mc.h -> edac_core.h

[akpm@linux-foundation.org: make printk more informative]
Cc: Alan Cox alan@lxorguk.ukuu.org.uk
Signed-off-by: Egor Martovetsky <egor@pasemi.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Doug Thompson <dougthompson@xmission.com
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: fix e752x reversed csrows

Found a 'reversal' decoding bug in the driver.  This patch fixes that mapping
to correctly display the CSROW entries in their proper order.  Users will be
enable to correctly identifiy the failing DIMM with this fix.

[akpm@linux-foundation.org: unneeded (and undesirable) cast of void*]
Cc: Alan Cox alan@lxorguk.ukuu.org.uk
Signed-off-by: Mark Grondona <mgrondona@llnl.gov>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: fix edac_device semaphore to mutex

A previous patch changed the edac_mc src file from semaphore usage to mutex
This patch changes the edac_device src file as well, from semaphore use to
mutex operation.

Use a mutex primitive for mutex operations, as it does not require a
semaphore

Cc: Alan Cox alan@lxorguk.ukuu.org.uk
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: remove file edac_mc.h

Removed the no-longer-needed file edac_mc.h

Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: mod edac_opt_state_to_string function

Refactored the function edac_op_state_toString() to be edac_op_state_to_string()
for consistent style, and its callers

Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: mod edac_align_ptr function

Refactor the edac_align_ptr() function to reduce the noise of casting the
aligned pointer to the various types of data objects and modified its callers
to its new signature

Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: edac_device code tidying

For the file edac_device.c perform some coding style enhancements
Add some function header comments
Made for better readability commands

Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: i5000 code tidying

Various code style conformance patches on the i5000 driver

Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: remove null from statics

Patches to conform to coding style, namely static don't need to be initialized
to NULL nor '0', as that is the default

Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: i5000 define typo

Found a typo in one of the #defines in the driver

MTR_DIM_RANKS --> MTR_DIMM_RANK

Signed-off-by: Marisuz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

include/linux/pci_id.h: add amd northbridge defines

pci_ids.h needs two of the AMD NB device-ids namely, Addressmap and the Memory
Controller devices

This patch adds those to the pci_id.h include file

Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: fix ignored return i82875p

Compiling this module gave a warning that the return value of
'pci_bus_add_device()' was not checked.

This patch adds that check and an output message

Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: mod race fix i82875p

If ERRSTS indicates that there's no error then we don't need to bother reading
the other registers.

In addition to making the common case faster, this actually fixes a small race
where we don't see an error but we clear the error bits anyway, potentially
wiping away info on an error that happened in the interim (or where a CE
arrives between the first and second read of ERRSTS, causing us to falsely
claim "UE overwrote CE").

Signed-off-by: Jason Uhlenkott <juhlenko@akamai.com>
Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: add mips and ppc visibility

1) Remove an old CVS ID string

2) change EDAC from a tristate option to a simple bool option

3) In addition to the X86 arch, PPC and MIPS also have drivers in the
submission queue.  This patch turns on the EDAC flag for those archs.  Each
driver will have its respective 'depends on ARCH' set.

Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: cleanup spaces-gotos after Lindent messup

This patch fixes some remnant spaces inserted by the use of Lindent.
Seems Lindent adds some spaces when it shoulded. These have been fixed.
In addition, goto targets have issues, these have been fixed
in this patch.

Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: update MAINTAINERS files for EDAC

Added new maintainers for the new EDAC drivers.

Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: add info kconfig

Kconfig - modified the help of EDAC

Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: device output clenaup

The error handling output strings needed to be refactored for better
displaying of the error informaton.

Also needed to added offset_value for output as well

Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: add device sysfs attributes

Added new controls for the edac_device and edac_mc sysfs folder.
These can be initialized by the low level driver to provide misc
controls into the low level driver for its use

Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: drivers to use new PCI operation

Move x86 drivers to new pci controller setup

Signed-off-by: Dave Jiang <djiang@mvista.com>
Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: Lindent r82600

Run r82600_edac.c file through Lindent for cleanup

Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Signed-off-by: Dave Jiang <djiang@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: Lindent i82443bxgx

Run i82443bxgx.c file through Lindent for cleanup

Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Signed-off-by: Dave Jiang <djiang@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: Lindent e752x

Run e752x_edac.c file through Lindent for cleanup

Signed-off-by: Dave Jiang <djiang@mvista.com>
Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: Lindent i82875p

Lindent cleanup of i82875p_edac driver

Signed-off-by: Dave Jiang <djiang@mvista.com>
Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: Lindent i82860

Lindent cleanup of i82860 edac driver

Signed-off-by: Dave Jiang <djiang@mvista.com>
Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: Lindent i3000

Lindent cleanup of i3000_edac driver

Signed-off-by: Dave Jiang <djiang@mvista.com>
Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: Lindent e7xxx

Lindent cleanup of e7xxx_edac driver

Signed-off-by: Dave Jiang <djiang@mvista.com>
Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: Lindent i5000

Ran e752x_edac.c file through Lindent for cleanup

Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Signed-off-by: Dave Jiang <djiang@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: Lindent amd76x

Ran this driver through Lindent for cleanup

Signed-off-by: Dave Jiang <djiang@mvista.com>
Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: cleanup workq ifdefs

The origin of this code comes from patches at sourceforge, that
allow EDAC to be updated to various kernels. With kernel version 2.6.20 a
new workq system was installed, thus the patches needed to be modified
based on the kernel version. For submitting to the latest kernel.org
those #ifdefs are removed

Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: edac_device sysfs cleanup

Removal of some old dead and disabled code from the edac_device sysfs code

Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: core Lindent cleanup

Run the EDAC CORE files through Lindent for cleanup

Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Signed-off-by: Dave Jiang <djiang@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: mod PCI poll names

Fixup poll values for MC and PCI.
Also make mc function names unique to mc.

Signed-off-by: Dave Jiang <djiang@mvista.com>
Signed-off-by: Douglas Thompson <dougthompson@xmissin.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: mod assert_error check

Change error check and clear variable from an atomic to an int

Signed-off-by: Dave Jiang <djiang@mvista.com>
Signed-off-by: Douglas Thompson <dougthompson@xmission.com
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: updated PCI monitoring

Moving PCI to a per-instance device model

This should include the correct sysfs setup as well. Please review.

Signed-off-by: Dave Jiang <djiang@mvista.com>
Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: mod MC to use workq instead of kthread

Move the memory controller object to work queue based implementation from the
kernel thread based.

Signed-off-by: Dave Jiang <djiang@mvista.com>
Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: new inte 30x0 MC driver

Here's a driver for the Intel 3000 and 3010 memory controllers,
relative to today's Sourceforge code drop.  This has only had light
testing (I've yet to actually see it handle a memory error) but it
detects my hardware correctly.

Signed-off-by: Jason Uhlenkott <juhlenko@akamai.com>
Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: add dev_name getter function

Move dev_name() macro to a more generic interface since it's not possible
to determine whether a device is pci, platform, or of_device easily.

Now each low level driver sets the name into the control structure, and
the EDAC core references the control structure for the information.

Better abstraction.

Signed-off-by: Dave Jiang <djiang@mvista.com>
Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: mod use edac_core.h

In the refactoring of edac_mc.c into several subsystem files,
the header file edac_mc.h became meaningless. A new header file
edac_core.h was created. All the files that previously included
"edac_mc.h" are changed to include "edac_core.h".

Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: add new nmi rescan

Provides a way for NMI reported errors on x86 to notify the EDAC
subsystem pending ECC errors by writing to a software state variable.

Here's the reworked patch. I added an EDAC stub to the kernel so we can
have variables that are in the kernel even if EDAC is a module. I also
implemented the idea of using the chip driver to select error detection
mode via module parameter and eliminate the kernel compile option.
Please review/test. Thx!

Also, I only made changes to some of the chipset drivers since I am
unfamiliar with the other ones. We can add similar changes as we go.

Signed-off-by: Dave Jiang <djiang@mvista.com>
Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac-new-i82443bxgz-mc-driver: mark as broken

It will claim the PCI devices from under intel_agp.ko's feet.  Greg is brewing
some fix for that.

Cc: Douglas Thompson <dougthompson@xmission.com>
Cc: Tim Small <tim@buttersideup.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: new i82443bxgz MC driver

This is a NEW EDAC Memory Controller driver for the 440BX chipset (I82443BXGX)
created and submitted by Timm Small

Signed-off-by: Tim Small <tim@buttersideup.com>
Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: core.h fix scrubdefs

Patch to fix some scrubbing #defines in the edac_core.h file

Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: new intel 5000 MC driver

Eric Wollesen ported the Bluesmoke Memory Controller driver (written by Doug
Thompson) for the Intel 5000X/V/P (Blackford/Greencreek) chipset to the in
kernel EDAC model.

This patch incorporates the module for the 5000X/V/P chipset family

[m.kozlowski@tuxland.pl: edac i5000 parenthesis balance fix]
Signed-off-by: Eric Wollesen <ericw@xmtp.net>
Signed-off-by: Doug Thompson <norsk5@xmission.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: change from semaphore to mutex operation

The EDAC core code uses a semaphore as mutex. use the mutex API
instead of the (binary) semaphore.

Matthaias wrote this, but since I had some patches ahead of it,
I need to modify it to follow my patches.

Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: mc sysfs add missing mem types

Adding missing mem types for use in the sysfs presentation file for
Memory Controller device objects.

Signed-off-by: Dave Jiang <djiang@mvista.com>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: add edac_device class

This patch adds the new 'class' of object to be managed, named: 'edac_device'.

As a peer of the 'edac_mc' class of object, it provides a non-memory centric
view of an ERROR DETECTING device in hardware. It provides a sysfs interface
and an abstraction for varioius EDAC type devices.

Multiple 'instances' within the class are possible, with each 'instance'
able to have multiple 'blocks', and each 'block' having 'attributes'.

At the 'block' level there are the 'ce_count' and 'ue_count' fields
which the device driver can update and/or call edac_device_handle_XX()
functions. At each higher level are additional 'total' count fields,
which are a summation of counts below that level.

This 'edac_device' has been used to capture and present ECC errors
which are found in a a L1 and L2 system on a per CORE/CPU basis.

Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: split out functions to unique files

This is a large patch to refactor the original EDAC module in the kernel
and to break it up into better file granularity, such that each source
file contains a given subsystem of the EDAC CORE.

Originally, the EDAC 'core' was contained in one source file: edac_mc.c
with it corresponding edac_mc.h file.

Now, there are the following files:

edac_module.c The main module init/exit function and other overhead
edac_mc.c Code handling the edac_mc class of object
edac_mc_sysfs.c Code handling for sysfs presentation
edac_pci_sysfs.c  Code handling for PCI sysfs presentation
edac_core.h CORE .h include file for 'edac_mc' and 'edac_device' drivers
edac_module.h Internal CORE .h include file

This forms a foundation upon which a later patch can create the 'edac_device'
class of object code in a new file 'edac_device.c'.

Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: add RDDR2 memory types

Add Registered RDDR2 memory types for displaying DDR2 memories

Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: core: make functions static

This patch makes needlessly global code static, in the edac core

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Doug Thompson <norsk5@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/edac: add edac_mc_find API

This simple patch adds an important CORE API for EDAC that EDAC drivers can
use to find their edac_mc control structure by passing a mem_ctl_info
'instance' value

Needed for subsequent patches

Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lguest: the documentation, example launcher

A brief document describing how to use lguest.  Because lguest doesn't have an
ABI we also include an example launcher in the Documentation directory.

[jmorris@namei.org: Fix up nat example in documentation]
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: James Morris <jmorris@namei.org>
Cc: Matias Zabaljauregui <matias.zabaljauregui@cern.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lguest: the block driver

Lguest block driver

A simple block driver for lguest.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <ak@suse.de>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lguest: the net driver

Lguest net driver

A simple net driver for lguest.

[akpm@linux-foundation.org: include fix]
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <ak@suse.de>
Cc: Jeff Garzik <jeff@garzik.org>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lguest: the console driver

A simple console driver for lguest.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lguest: the Makefile and Kconfig

This is the Kconfig and Makefile to allow lguest to actually be
compiled.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lguest: the asm offsets

This is the structure offsets required by lg.ko's switcher.S.

Unfortunately we don't have infrastructure for private asm-offsets
creation.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lguest: the host code

This is the code for the "lg.ko" module, which allows lguest guests to
be launched.

[akpm@linux-foundation.org: update for futex-new-private-futexes]
[akpm@linux-foundation.org: build fix]
[jmorris@namei.org: lguest: use hrtimers]
[akpm@linux-foundation.org: x86_64 build fix]
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <ak@suse.de>
Cc: Eric Dumazet <dada1@cosmosbay.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lguest: the guest code

lguest is a simple hypervisor for Linux on Linux.  Unlike kvm it doesn't need
VT/SVM hardware.  Unlike Xen it's simply "modprobe and go".  Unlike both, it's
5000 lines and self-contained.

Performance is ok, but not great (-30% on kernel compile).  But given its
hackability, I expect this to improve, along with the paravirt_ops code which
it supplies a complete example for.  There's also a 64-bit version being
worked on and other craziness.

But most of all, lguest is awesome fun!  Too much of the kernel is a big ball
of hair.  lguest is simple enough to dive into and hack, plus has some warts
which scream "fork me!".

This patch:

This is the code and headers required to make an i386 kernel an lguest guest.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <ak@suse.de>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lguest: export symbols for lguest as a module

lguest does some fairly lowlevel things to support a host, which
normal modules don't need:

math_state_restore:
When the guest triggers a Device Not Available fault, we need
to be able to restore the FPU

__put_task_struct:
We need to hold a reference to another task for inter-guest
I/O, and put_task_struct() is an inline function which calls
__put_task_struct.

access_process_vm:
We need to access another task for inter-guest I/O.

map_vm_area & __get_vm_area:
We need to map the switcher shim (ie. monitor) at 0xFFC01000.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

RTC: add periodic irq support to rtc-cmos

Adds support for periodic irq enabling in rtc-cmos.  This could be used by
the ALSA driver and is already being tested with the zaptel ztdummy module.

Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

knfsd: clean up EX_RDONLY

Share a little common code, reverse the arguments for consistency, drop the
unnecessary "inline", and lowercase the name.

Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Acked-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

knfsd: move EX_RDONLY out of header

EX_RDONLY is only called in one place; just put it there.

Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Acked-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

nfsd: remove unnecessary NULL checks from nfsd_cross_mnt

We can now assume that rqst_exp_get_by_name() does not return NULL; so clean
up some unnecessary checks.

Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Acked-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

nfsd: return errors, not NULL, from export functions

I converted the various export-returning functions to return -ENOENT instead
of NULL, but missed a few cases.

This particular case could cause actual bugs in the case of a krb5 client that
doesn't match any ip-based client and that is trying to access a filesystem
not exported to krb5 clients.

Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Acked-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

nfsd: fix possible read-ahead cache and export table corruption

The value of nperbucket calculated here is too small--we should be rounding up
instead of down--with the result that the index j in the following loop can
overflow the raparm_hash array.  At least in my case, the next thing in memory
turns out to be export_table, so the symptoms I see are crashes caused by the
appearance of four zeroed-out export entries in the first bucket of the hash
table of exports (which were actually entries in the readahead cache, a
pointer to which had been written to the export table in this initialization
code).

It looks like the bug was probably introduced with commit
fce1456a19f5c08b688c29f00ef90fdfa074c79b ("knfsd: make the readahead params
cache SMP-friendly").

Cc: <stable@kernel.org>
Cc: Greg Banks <gnb@melbourne.sgi.com>
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Acked-by: NeilBrown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

move page writeback acounting out of macros

page-writeback accounting is presently performed in the page-flags macros.
This is inconsistent and a bit ugly and makes it awkward to implement
per-backing_dev under-writeback page accounting.

So move this accounting down to the callsite(s).

Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

timer.c: cleanup recently introduced whitespace damage

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

timekeeping: fixup shadow variable argument

clocksource_adjust() has a clock argument, which shadows the file global clock
variable.  Fix this up.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68knommu: remove is_in_rom() function

Remove is_in_rom() function.  It doesn't actually serve the purpose it was
intended to.  If you look at the use of it _access_ok() (which is the only use
of it) then it is obvious that most of memory is marked as access_ok.  No
point having is_in_rom() then, so remove it.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68knommu: start dump from exception stack

In die_if_kernel() start the stack dump at the exception-time SP, not at the
SP with all the saved registers; the stack below exception-time sp contains
only exception-saved values and is already printed in details just before.

Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68knommu: generic irq handling

Change the m68knommu irq handling to use the generic irq framework.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hugetlb: use set_compound_page_dtor

Use appropriate accessor function to set compound page destructor
function.

Cc: William Irwin <wli@holomorphy.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Adam Litke <agl@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Remove nid_lock from alloc_fresh_huge_page

The fix to that race in alloc_fresh_huge_page() which could give an illegal
node ID did not need nid_lock at all: the fix was to replace static int nid
by static int prev_nid and do the work on local int nid.  nid_lock did make
sure that racers strictly roundrobin the nodes, but that's not something we
need to enforce strictly.  Kill nid_lock.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

isdn/sc: compile breakage re check_reset()

There is check_reset() -- global function in drivers/isdn/sc/
There is check_reset -- variable holding module param in aacraid driver.

On allyesconfig they clash with:

  LD      drivers/built-in.o
drivers/isdn/built-in.o: In function `check_reset':
: multiple definition of `check_reset'
drivers/scsi/built-in.o:(.data+0xe458): first defined here
ld: Warning: size of symbol `check_reset' changed from 4 in drivers/scsi/built-in.o to 219 in drivers/isdn/built-in.o
ld: Warning: type of symbol `check_reset' changed from 1 to 2 in drivers/isdn/built-in.o

Rename the former.

Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Cc: Karsten Keil <kkeil@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vmalloc_32 should use GFP_KERNEL

I've noticed lots of failures of vmalloc_32 on machines where it
shouldn't have failed unless it was doing an atomic operation.

Looking closely, I noticed that:

#if defined(CONFIG_64BIT) && defined(CONFIG_ZONE_DMA32)
#define GFP_VMALLOC32 GFP_DMA32
#elif defined(CONFIG_64BIT) && defined(CONFIG_ZONE_DMA)
#define GFP_VMALLOC32 GFP_DMA
#else
#define GFP_VMALLOC32 GFP_KERNEL
#endif

Which seems to be incorrect, it should always -or- in the DMA flags
on top of GFP_KERNEL, thus this patch.

This fixes frequent errors launchin X with the nouveau DRM for example.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Andi Kleen <ak@suse.de>
Cc: Dave Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

FRV: work around a possible compiler bug

Work around a possible bug in the FRV compiler.

What appears to be happening is that gcc resolves the
__builtin_constant_p() in kmalloc() to true, but then fails to reduce the
therefore constant conditions in the if-statements it guards to constant
results.

When compiling with -O2 or -Os, one single spurious error crops up in
cpuup_callback() in mm/slab.c.  This can be avoided by making the memsize
variable const.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dequeue_huge_page() warning fix

mm/hugetlb.c: In function `dequeue_huge_page':
mm/hugetlb.c:72: warning: 'nid' might be used uninitialized in this function

Cc: Christoph Lameter <clameter@sgi.com>
Cc: Adam Litke <agl@us.ibm.com>
Cc: David Gibson <hermes@gibson.dropbear.id.au>
Cc: William Lee Irwin III <wli@holomorphy.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

some kmalloc/memset ->kzalloc (tree wide)

Transform some calls to kmalloc/memset to a single kzalloc (or kcalloc).

Here is a short excerpt of the semantic patch performing
this transformation:

@@
type T2;
expression x;
identifier f,fld;
expression E;
expression E1,E2;
expression e1,e2,e3,y;
statement S;
@@

 x =
- kmalloc
+ kzalloc
  (E1,E2)
  ...  when != \(x->fld=E;\|y=f(...,x,...);\|f(...,x,...);\|x=E;\|while(...) S\|for(e1;e2;e3) S\)
- memset((T2)x,0,E1);

@@
expression E1,E2,E3;
@@

- kzalloc(E1 * E2,E3)
+ kcalloc(E1,E2,E3)

[akpm@linux-foundation.org: get kcalloc args the right way around]
Signed-off-by: Yoann Padioleau <padator@wanadoo.fr>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Acked-by: Russell King <rmk@arm.linux.org.uk>
Cc: Bryan Wu <bryan.wu@analog.com>
Acked-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Dave Airlie <airlied@linux.ie>
Acked-by: Roland Dreier <rolandd@cisco.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Acked-by: Pierre Ossman <drzeus-list@drzeus.cx>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: "David S. Miller" <davem@davemloft.net>
Acked-by: Greg KH <greg@kroah.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

stacktrace: fix header file for !CONFIG_STACKTRACE

The print_stack_trace macro in stacktrace.h has a wrong number of
arguments, fix it.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lockdep debugging: give stacktrace for init_error

When I started adding support for lockdep to 64-bit powerpc, I got a
lockdep_init_error and with this patch was able to pinpoint why and where
to put lockdep_init().  Let's support this generally for others adding
lockdep support to their architecture.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lockstat: better class name representation

optionally add class->name_version and class->subclass to the class name

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lockstat: measure lock bouncing

    __acquire
        |
       lock _____
        |        \
        |    __contended
        |         |
        |        wait
        | _______/
        |/
        |
   __acquired
        |
   __release
        |
     unlock

We measure acquisition and contention bouncing.

This is done by recording a cpu stamp in each lock instance.

Contention bouncing requires the cpu stamp to be set on acquisition. Hence we
move __acquired into the generic path.

__acquired is then used to measure acquisition bouncing by comparing the
current cpu with the old stamp before replacing it.

__contended is used to measure contention bouncing (only useful for preemptable
locks)

[akpm@linux-foundation.org: cleanups]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>