Sudarsana Reddy Kalluru [Tue, 19 Jun 2018 04:58:02 +0000 (21:58 -0700)]
qed: Do not advertise DCBX_LLD_MANAGED capability.
[ Upstream commit
ff54d5cd9ec15546abc870452dd0b66eef4b4606 ]
Do not advertise DCBX_LLD_MANAGED capability i.e., do not allow
external agent to manage the dcbx/lldp negotiation. MFW acts as lldp agent
for qed* devices, and no other lldp agent is allowed to coexist with mfw.
Also updated a debug print, to not to display the redundant info.
Fixes:
a1d8d8a51 ("qed: Add dcbnl support.")
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sudarsana Reddy Kalluru [Tue, 19 Jun 2018 04:58:01 +0000 (21:58 -0700)]
qed: Add sanity check for SIMD fastpath handler.
[ Upstream commit
3935a70968820c3994db4de7e6e1c7e814bff875 ]
Avoid calling a SIMD fastpath handler if it is NULL. The check is needed
to handle an unlikely scenario where unsolicited interrupt is destined to
a PF in INTa mode.
Fixes:
fe56b9e6a ("qed: Add module with basic common support")
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sudarsana Reddy Kalluru [Tue, 19 Jun 2018 04:58:00 +0000 (21:58 -0700)]
qed: Fix possible memory leak in Rx error path handling.
[ Upstream commit
4f9de4df901fb84709fe3a864dfa4eaf35700f68 ]
Memory for packet buffers need to be freed in the error paths as there is
no consumer (e.g., upper layer) for such packets and that memory will never
get freed.
The issue was uncovered when port was attacked with flood of isatap
packets, these are multicast packets hence were directed at all the PFs.
For foce PF, this meant they were routed to the ll2 module which in turn
drops such packets.
Fixes:
0a7fb11c ("qed: Add Light L2 support")
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhizhou Zhang [Tue, 12 Jun 2018 09:07:37 +0000 (17:07 +0800)]
arm64: make secondary_start_kernel() notrace
[ Upstream commit
b154886f7892499d0d3054026e19dfb9a731df61 ]
We can't call function trace hook before setup percpu offset.
When entering secondary_start_kernel(), percpu offset has not
been initialized. So this lead hotplug malfunction.
Here is the flow to reproduce this bug:
echo 0 > /sys/devices/system/cpu/cpu1/online
echo function > /sys/kernel/debug/tracing/current_tracer
echo 1 > /sys/kernel/debug/tracing/tracing_on
echo 1 > /sys/devices/system/cpu/cpu1/online
Acked-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Zhizhou Zhang <zhizhouzhang@asrmicro.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marek Szyprowski [Tue, 12 Jun 2018 11:08:40 +0000 (13:08 +0200)]
arm64: dma-mapping: clear buffers allocated with FORCE_CONTIGUOUS flag
[ Upstream commit
dd65a941f6ba473a5cb9d013d57fa43b48450a04 ]
dma_alloc_*() buffers might be exposed to userspace via mmap() call, so
they should be cleared on allocation. In case of IOMMU-based dma-mapping
implementation such buffer clearing was missing in the code path for
DMA_ATTR_FORCE_CONTIGUOUS flag handling, because dma_alloc_from_contiguous()
doesn't honor __GFP_ZERO flag. This patch fixes this issue. For more
information on clearing buffers allocated by dma_alloc_* functions,
see commit
6829e274a623 ("arm64: dma-mapping: always clear allocated
buffers").
Fixes:
44176bb38fa4 ("arm64: Add support for DMA_ATTR_FORCE_CONTIGUOUS to IOMMU")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhouyang Jia [Sat, 16 Jun 2018 00:14:37 +0000 (08:14 +0800)]
xen/scsiback: add error handling for xenbus_printf
[ Upstream commit
7c63ca24c878e0051c91904b72174029320ef4bd ]
When xenbus_printf fails, the lack of error-handling code may
cause unexpected results.
This patch adds error-handling code after calling xenbus_printf.
Signed-off-by: Zhouyang Jia <jiazhouyang09@gmail.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhouyang Jia [Fri, 15 Jun 2018 17:05:01 +0000 (01:05 +0800)]
scsi: xen-scsifront: add error handling for xenbus_printf
[ Upstream commit
93efbd39870474cc536b9caf4a6efeb03b0bc56f ]
When xenbus_printf fails, the lack of error-handling code may
cause unexpected results.
This patch adds error-handling code after calling xenbus_printf.
Signed-off-by: Zhouyang Jia <jiazhouyang09@gmail.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Trond Myklebust [Fri, 15 Jun 2018 19:58:45 +0000 (15:58 -0400)]
pNFS: Always free the session slot on error in nfs4_layoutget_handle_exception
[ Upstream commit
2dbf8dffbf35fd8f611083b9d9fe74fdccf912a3 ]
Right now, we can call nfs_commit_inode() while holding the session slot,
which could lead to NFSv4 deadlocks. Ensure we only keep the slot if
the server returned a layout that we have to process.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhouyang Jia [Thu, 14 Jun 2018 23:34:52 +0000 (07:34 +0800)]
xen: add error handling for xenbus_printf
[ Upstream commit
84c029a73327cef571eaa61c7d6e67e8031b52ec ]
When xenbus_printf fails, the lack of error-handling code may
cause unexpected results.
This patch adds error-handling code after calling xenbus_printf.
Signed-off-by: Zhouyang Jia <jiazhouyang09@gmail.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Minas Harutyunyan [Wed, 23 May 2018 12:24:44 +0000 (16:24 +0400)]
dwc2: gadget: Fix ISOC IN DDMA PID bitfield value calculation
[ Upstream commit
1d8e5c00275825fc42aaa5597dab1d0b5b26bb64 ]
PID bitfield in descriptor should be set based on particular request
length, not based on EP's mc value. PID value can't be set to 0 even
request length is 0.
Signed-off-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Grigor Tovmasyan [Thu, 24 May 2018 14:22:30 +0000 (18:22 +0400)]
usb: gadget: dwc2: fix memory leak in gadget_init()
[ Upstream commit
9bb073a053f0464ea74a4d4c331fdb7da58568d6 ]
Freed allocated request for ep0 to prevent memory leak in case when
dwc2_driver_probe() failed.
Cc: Stefan Wahren <stefan.wahren@i2se.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chunfeng Yun [Fri, 25 May 2018 09:24:57 +0000 (17:24 +0800)]
usb: gadget: composite: fix delayed_status race condition when set_interface
[ Upstream commit
980900d6318066b9f8314bfb87329a20fd0d1ca4 ]
It happens when enable debug log, if set_alt() returns
USB_GADGET_DELAYED_STATUS and usb_composite_setup_continue()
is called before increasing count of @delayed_status,
so fix it by using spinlock of @cdev->lock.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Tested-by: Jay Hsu <shih-chieh.hsu@mediatek.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
William Wu [Fri, 11 May 2018 09:46:32 +0000 (17:46 +0800)]
usb: dwc2: fix isoc split in transfer with no data
[ Upstream commit
70c3c8cb83856758025c2a211dd022bc0478922a ]
If isoc split in transfer with no data (the length of DATA0
packet is zero), we can't simply return immediately. Because
the DATA0 can be the first transaction or the second transaction
for the isoc split in transaction. If the DATA0 packet with no
data is in the first transaction, we can return immediately.
But if the DATA0 packet with no data is in the second transaction
of isoc split in transaction sequence, we need to increase the
qtd->isoc_frame_index and giveback urb to device driver if needed,
otherwise, the MDATA packet will be lost.
A typical test case is that connect the dwc2 controller with an
usb hs Hub (GL852G-12), and plug an usb fs audio device (Plantronics
headset) into the downstream port of Hub. Then use the usb mic
to record, we can find noise when playback.
In the case, the isoc split in transaction sequence like this:
- SSPLIT IN transaction
- CSPLIT IN transaction
- MDATA packet (176 bytes)
- CSPLIT IN transaction
- DATA0 packet (0 byte)
This patch use both the length of DATA0 and qtd->isoc_split_offset
to check if the DATA0 is in the second transaction.
Tested-by: Gevorg Sahakyan <sahakyan@synopsys.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Minas Harutyunyan hminas@synopsys.com>
Signed-off-by: William Wu <william.wu@rock-chips.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
William Wu [Fri, 11 May 2018 09:46:31 +0000 (17:46 +0800)]
usb: dwc2: alloc dma aligned buffer for isoc split in
[ Upstream commit
af424a410749ed7e0c2bffd3cedbc7c274d0ff6f ]
The commit
3bc04e28a030 ("usb: dwc2: host: Get aligned DMA in
a more supported way") rips out a lot of code to simply the
allocation of aligned DMA. However, it also introduces a new
issue when use isoc split in transfer.
In my test case, I connect the dwc2 controller with an usb hs
Hub (GL852G-12), and plug an usb fs audio device (Plantronics
headset) into the downstream port of Hub. Then use the usb mic
to record, we can find noise when playback.
It's because that the usb Hub uses an MDATA for the first
transaction and a DATA0 for the second transaction for the isoc
split in transaction. An typical isoc split in transaction sequence
like this:
- SSPLIT IN transaction
- CSPLIT IN transaction
- MDATA packet
- CSPLIT IN transaction
- DATA0 packet
The DMA address of MDATA (urb->dma) is always DWORD-aligned, but
the DMA address of DATA0 (urb->dma + qtd->isoc_split_offset) may
not be DWORD-aligned, it depends on the qtd->isoc_split_offset (the
length of MDATA). In my test case, the length of MDATA is usually
unaligned, this cause DATA0 packet transmission error.
This patch use kmem_cache to allocate aligned DMA buf for isoc
split in transaction. Note that according to usb 2.0 spec, the
maximum data payload size is 1023 bytes for each fs isoc ep,
and the maximum allowable interrupt data payload size is 64 bytes
or less for fs interrupt ep. So we set the size of object to be
1024 bytes in the kmem cache.
Tested-by: Gevorg Sahakyan <sahakyan@synopsys.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Minas Harutyunyan hminas@synopsys.com>
Signed-off-by: William Wu <william.wu@rock-chips.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Garry [Fri, 8 Jun 2018 10:26:33 +0000 (18:26 +0800)]
libahci: Fix possible Spectre-v1 pmp indexing in ahci_led_store()
[ Upstream commit
fae2a63737e5973f1426bc139935a0f42e232844 ]
Currently smatch warns of possible Spectre-V1 issue in ahci_led_store():
drivers/ata/libahci.c:1150 ahci_led_store() warn: potential spectre issue 'pp->em_priv' (local cap)
Userspace controls @pmp from following callchain:
em_message->store()
->ata_scsi_em_message_store()
-->ap->ops->em_store()
--->ahci_led_store()
After the mask+shift @pmp is effectively an 8b value, which is used to
index into an array of length 8, so sanitize the array index.
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vijay Immanuel [Wed, 13 Jun 2018 01:16:05 +0000 (18:16 -0700)]
IB/rxe: Fix missing completion for mem_reg work requests
[ Upstream commit
375dc53d032fc11e98036b5f228ad13f7c5933f5 ]
Run the completer task to post a work completion after processing
a memory registration or invalidate work request. This covers the
case where the memory registration or invalidate was the last work
request posted to the qp.
Signed-off-by: Vijay Immanuel <vijayi@attalasystems.com>
Reviewed-by: Yonatan Cohen <yonatanc@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ayan Kumar Halder [Tue, 10 Apr 2018 18:25:03 +0000 (19:25 +0100)]
drm/arm/malidp: Preserve LAYER_FORMAT contents when setting format
[ Upstream commit
ad7fda2e378f4356df621a39655f7c200b495d81 ]
On some Mali-DP processors, the LAYER_FORMAT register contains fields
other than the format. These bits were unconditionally cleared when
setting the pixel format, whereas they should be preserved at their
reset values.
Reported-by: Brian Starkey <brian.starkey@arm.com>
Reported-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alison Wang [Tue, 24 Apr 2018 02:42:32 +0000 (10:42 +0800)]
drm: mali-dp: Enable Global SE interrupts mask for DP500
[ Upstream commit
89610dc2c235e7b02bb9fba0ce247e12d4dde7cd ]
In the situation that DE and SE aren’t shared the same interrupt number,
the Global SE interrupts mask bit MASK_IRQ_EN in MASKIRQ must be set, or
else other mask bits will not work and no SE interrupt will occur. This
patch enables MASK_IRQ_EN for SE to fix this problem.
Signed-off-by: Alison Wang <alison.wang@nxp.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hoan Tran [Thu, 7 Jun 2018 13:35:01 +0000 (14:35 +0100)]
drivers/perf: xgene_pmu: Fix IOB SLOW PMU parser error
[ Upstream commit
a45fc268db20ecd859bb61e25045912b3194b5e6 ]
This patch fixes the below parser error of the IOB SLOW PMU.
# perf stat -a -e iob-slow0/cycle-count/ sleep 1
evenf syntax error: 'iob-slow0/cycle-count/'
\___ parser error
It replaces the "-" character by "_" character inside the PMU name.
Signed-off-by: Hoan Tran <hoan.tran@amperecomputing.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ray Jui [Tue, 12 Jun 2018 20:21:31 +0000 (13:21 -0700)]
arm64: dts: Stingray: Fix I2C controller interrupt type
[ Upstream commit
75af23c4736c5633894ea0baf9bca1cf6b248ca4 ]
Fix I2C controller interrupt to use IRQ_TYPE_LEVEL_HIGH for Broadcom
Stingray SoC.
Fixes:
1256ea18875d ("arm64: dts: Add I2C DT nodes for Stingray SoC")
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ray Jui [Tue, 12 Jun 2018 20:21:30 +0000 (13:21 -0700)]
arm64: dts: ns2: Fix PCIe controller interrupt type
[ Upstream commit
d0b8aed9e80ab526dbb04020bfc94ecea7bddb44 ]
Fix PCIe controller interrupt to use IRQ_TYPE_LEVEL_HIGH for Broadcom
NS2 SoC.
Fixes:
fd5e5dd56a2f ("arm64: dts: Add PCIe0 and PCIe4 DT nodes for NS2")
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ray Jui [Tue, 12 Jun 2018 20:21:29 +0000 (13:21 -0700)]
arm64: dts: ns2: Fix I2C controller interrupt type
[ Upstream commit
e605c287deed45624e8d35a15e3f0b4faab1a62d ]
Fix I2C controller interrupt to use IRQ_TYPE_LEVEL_HIGH for Broadcom NS2
SoC.
Fixes:
7ac674e8df7a ("arm64: dts: Add I2C nodes for NS2")
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Scott Branden [Tue, 22 May 2018 17:01:39 +0000 (10:01 -0700)]
arm64: dts: specify 1.8V EMMC capabilities for bcm958742t
[ Upstream commit
37c2bd81a86ebb1cc934bf52a29c33d6f9abff7f ]
Specify 1.8V EMMC capabilities for bcm958742t board to indicate support
for UHS mode.
Fixes:
d4b4aba6be8a ("arm64: dts: Initial DTS files for Broadcom Stingray SOC")
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Scott Branden [Fri, 18 May 2018 15:21:20 +0000 (08:21 -0700)]
arm64: dts: specify 1.8V EMMC capabilities for bcm958742k
[ Upstream commit
eba92503e980c08ac353d0d669d0bb143979abcd ]
Specify 1.8V EMMC capabilities for bcm958742k board to indicate support
for UHS mode.
Fixes:
d4b4aba6be8a ("arm64: dts: Initial DTS files for Broadcom Stingray SOC")
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ray Jui [Tue, 12 Jun 2018 20:21:28 +0000 (13:21 -0700)]
ARM: dts: Cygnus: Fix PCIe controller interrupt type
[ Upstream commit
6cb1628ad3506b315cdddd7676db0ff2af378d28 ]
Fix PCIe controller interrupt to use IRQ_TYPE_LEVEL_HIGH for Broadcom
Cygnus SoC
Fixes:
cd590b50a936 ("ARM: dts: enable PCIe support for Cygnus")
Fixes:
f6b889358a82 ("ARM: dts: Enable MSI support for Broadcom Cygnus")
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ray Jui [Tue, 12 Jun 2018 20:21:27 +0000 (13:21 -0700)]
ARM: dts: Cygnus: Fix I2C controller interrupt type
[ Upstream commit
71ca3409703b62b6a092d0d9d13f366c121bc5d3 ]
Fix I2C controller interrupt to use IRQ_TYPE_LEVEL_HIGH for Broadcom
Cygnus SoC.
Fixes:
b51c05a331ff ("ARM: dts: add I2C device nodes for Broadcom Cygnus")
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Florian Fainelli [Mon, 11 Jun 2018 22:53:40 +0000 (15:53 -0700)]
ARM: dts: BCM5301x: Fix i2c controller interrupt type
[ Upstream commit
a0a8338e905734518ab9b10b06e7fd0201228f8b ]
The i2c controller should be using IRQ_TYPE_LEVEL_HIGH, fix that.
Fixes:
bb097e3e0045 ("ARM: dts: BCM5301X: Add I2C support to the DT")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Florian Fainelli [Mon, 11 Jun 2018 22:47:13 +0000 (15:47 -0700)]
ARM: dts: NSP: Fix PCIe controllers interrupt types
[ Upstream commit
403fde644855bc71318c8db65646383e22653b13 ]
The interrupts for the PCIe controllers should all be of type
IRQ_TYPE_LEVEL_HIGH instead of IRQ_TYPE_NONE.
Fixes:
d71eb9412088 ("ARM: dts: NSP: Add MSI support on PCI")
Fixes:
522199029fdc ("ARM: dts: NSP: Fix PCIE DT issue")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Florian Fainelli [Mon, 11 Jun 2018 22:47:12 +0000 (15:47 -0700)]
ARM: dts: NSP: Fix i2c controller interrupt type
[ Upstream commit
a3e32e78a40017756c71ef6dad429ffe3301126a ]
The i2c controller should use IRQ_TYPE_LEVEL_HIGH instead of
IRQ_TYPE_NONE.
Fixes:
0f9f27a36d09 ("ARM: dts: NSP: Add I2C support to the DT")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fathi Boudra [Thu, 14 Jun 2018 09:57:08 +0000 (11:57 +0200)]
selftests: sync: add config fragment for testing sync framework
[ Upstream commit
d6a3e55131fcb1e5ca1753f4b6f297a177b2fc91 ]
Unless the software synchronization objects (CONFIG_SW_SYNC) is enabled,
the sync test will be skipped:
TAP version 13
1..0 # Skipped: Sync framework not supported by kernel
Add a config fragment file to be able to run "make kselftest-merge" to
enable relevant configuration required in order to run the sync test.
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
Link: https://lkml.org/lkml/2017/5/5/14
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shuah Khan (Samsung OSG) [Thu, 14 Jun 2018 03:31:43 +0000 (21:31 -0600)]
selftests: vm: return Kselftest Skip code for skipped tests
[ Upstream commit
a4d7537789724985cafbc9260a31ca4f2b7cf123 ]
When vm test is skipped because of unmet dependencies and/or unsupported
configuration, it exits with error which is treated as a fail by the
Kselftest framework. This leads to false negative result even when the
test could not be run.
Change it to return kselftest skip code when a test gets skipped to
clearly report that the test could not be run.
Kselftest framework SKIP code is 4 and the framework prints appropriate
messages to indicate that the test is skipped.
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Acked-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shuah Khan (Samsung OSG) [Thu, 14 Jun 2018 22:56:13 +0000 (16:56 -0600)]
selftests: zram: return Kselftest Skip code for skipped tests
[ Upstream commit
685814466bf8398192cf855415a0bb2cefc1930e ]
When zram test is skipped because of unmet dependencies and/or
unsupported configuration, it exits with error which is treated as
a fail by the Kselftest framework. This leads to false negative result
even when the test could not be run.
Change it to return kselftest skip code when a test gets skipped to
clearly report that the test could not be run.
Kselftest framework SKIP code is 4 and the framework prints appropriate
messages to indicate that the test is skipped.
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shuah Khan (Samsung OSG) [Thu, 14 Jun 2018 03:10:48 +0000 (21:10 -0600)]
selftests: user: return Kselftest Skip code for skipped tests
[ Upstream commit
d7d5311d4aa9611fe1a5a851e6f75733237a668a ]
When user test is skipped because of unmet dependencies and/or
unsupported configuration, it exits with error which is treated as
a fail by the Kselftest framework. This leads to false negative result
even when the test could not be run.
Change it to return kselftest skip code when a test gets skipped to
clearly report that the test could not be run. Add an explicit check
for module presence and return skip code if module isn't present.
Kselftest framework SKIP code is 4 and the framework prints appropriate
messages to indicate that the test is skipped.
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shuah Khan (Samsung OSG) [Wed, 13 Jun 2018 00:11:37 +0000 (18:11 -0600)]
selftests: sysctl: return Kselftest Skip code for skipped tests
[ Upstream commit
c7db6ffb831fd36a03485a0d88b1e505378975ad ]
When sysctl test is skipped because of unmet dependencies and/or
unsupported configuration, it exits with error which is treated as
a fail by the Kselftest framework. This leads to false negative result
even when the test could not be run.
Change it to return kselftest skip code when a test gets skipped to
clearly report that the test could not be run.
Changed return code to kselftest skip code in skip error legs that check
requirements and module probe test error leg.
Kselftest framework SKIP code is 4 and the framework prints appropriate
messages to indicate that the test is skipped.
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shuah Khan (Samsung OSG) [Tue, 12 Jun 2018 23:40:31 +0000 (17:40 -0600)]
selftests: static_keys: return Kselftest Skip code for skipped tests
[ Upstream commit
8781578087b8fb8829558bac96c3c24e5ba26f82 ]
When static_keys test is skipped because of unmet dependencies and/or
unsupported configuration, it exits with error which is treated as a fail
by the Kselftest framework. This leads to false negative result even when
the test could not be run.
Change it to return kselftest skip code when a test gets skipped to clearly
report that the test could not be run.
Added an explicit searches for test_static_key_base and test_static_keys
modules and return skip code if they aren't found to differentiate between
the failure to load the module condition and module not found condition.
Kselftest framework SKIP code is 4 and the framework prints appropriate
messages to indicate that the test is skipped.
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shuah Khan (Samsung OSG) [Tue, 12 Jun 2018 22:46:03 +0000 (16:46 -0600)]
selftests: pstore: return Kselftest Skip code for skipped tests
[ Upstream commit
856e7c4b619af622d56b3b454f7bec32a170ac99 ]
When pstore_post_reboot test gets skipped because of unmet dependencies
and/or unsupported configuration, it returns 0 which is treated as a pass
by the Kselftest framework. This leads to false positive result even when
the test could not be run.
Change it to return kselftest skip code when a test gets skipped to clearly
report that the test could not be run.
Kselftest framework SKIP code is 4 and the framework prints appropriate
messages to indicate that the test is skipped.
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gao Feng [Wed, 13 Jun 2018 04:26:13 +0000 (12:26 +0800)]
netfilter: nf_ct_helper: Fix possible panic after nf_conntrack_helper_unregister
[ Upstream commit
ad9852af97587b8abe8102f9ddcb05c9769656f6 ]
The helper module would be unloaded after nf_conntrack_helper_unregister,
so it may cause a possible panic caused by race.
nf_ct_iterate_destroy(unhelp, me) reset the helper of conntrack as NULL,
but maybe someone has gotten the helper pointer during this period. Then
it would panic, when it accesses the helper and the module was unloaded.
Take an example as following:
CPU0 CPU1
ctnetlink_dump_helpinfo
helper = rcu_dereference(help->helper);
unhelp
set helper as NULL
unload helper module
helper->to_nlattr(skb, ct);
As above, the cpu0 tries to access the helper and its module is unloaded,
then the panic happens.
Signed-off-by: Gao Feng <gfree.wind@vip.163.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Wed, 13 Jun 2018 17:11:56 +0000 (10:11 -0700)]
netfilter: ipv6: nf_defrag: reduce struct net memory waste
[ Upstream commit
9ce7bc036ae4cfe3393232c86e9e1fea2153c237 ]
It is a waste of memory to use a full "struct netns_sysctl_ipv6"
while only one pointer is really used, considering netns_sysctl_ipv6
keeps growing.
Also, since "struct netns_frags" has cache line alignment,
it is better to move the frags_hdr pointer outside, otherwise
we spend a full cache line for this pointer.
This saves 192 bytes of memory per netns.
Fixes:
c038a767cd69 ("ipv6: add a new namespace for nf_conntrack_reasm")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mika Westerberg [Mon, 18 Jun 2018 11:17:16 +0000 (14:17 +0300)]
ACPI / EC: Use ec_no_wakeup on Thinkpad X1 Carbon 6th
[ Upstream commit
8195a655e5ce09550aff81b2573d9b015d520cb9 ]
On this system EC interrupt triggers constantly kicking devices out of
low power states and thus blocking power management. The system also has
a PCIe root port hosting Alpine Ridge Thunderbolt controller and it
never gets a chance to go to D3cold because of this.
Since the power button works the same regardless if EC interrupt is
enabled or not during s2idle, add a quirk for this machine that sets
ec_no_wakeup=true preventing spurious wakeups.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Thu, 31 May 2018 14:45:52 +0000 (16:45 +0200)]
usb: dwc3: of-simple: fix use-after-free on remove
[ Upstream commit
896e518883f18e601335908192e33426c1f599a4 ]
The clocks have already been explicitly disabled and put as part of
remove() so the runtime suspend callback must not be run when balancing
the runtime PM usage count before returning.
Fixes:
16adc674d0d6 ("usb: dwc3: add generic OF glue layer")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Minas Harutyunyan [Tue, 12 Jun 2018 08:37:29 +0000 (12:37 +0400)]
usb: dwc2: gadget: Fix issue in dwc2_gadget_start_isoc()
[ Upstream commit
1ffba9058737af2ddeebc813faa8ea9b16bc892a ]
In case of requests queue is empty reset EP target_frame to
initial value.
This allow restarting ISOC traffic in case when function
driver queued requests with interruptions.
Tested-by: Zeng Tao <prime.zeng@hisilicon.com>
Signed-off-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vincent Pelletier [Wed, 13 Jun 2018 11:05:06 +0000 (11:05 +0000)]
usb: gadget: ffs: Fix BUG when userland exits with submitted AIO transfers
[ Upstream commit
d52e4d0c0c428bf2ba35074a7495cdb28e2efbae ]
This bug happens only when the UDC needs to sleep during usb_ep_dequeue,
as is the case for (at least) dwc3.
[ 382.200896] BUG: scheduling while atomic: screen/1808/0x00000100
[ 382.207124] 4 locks held by screen/1808:
[ 382.211266] #0: (rcu_callback){....}, at: [<
c10b4ff0>] rcu_process_callbacks+0x260/0x440
[ 382.219949] #1: (rcu_read_lock_sched){....}, at: [<
c1358ba0>] percpu_ref_switch_to_atomic_rcu+0xb0/0x130
[ 382.230034] #2: (&(&ctx->ctx_lock)->rlock){....}, at: [<
c11f0c73>] free_ioctx_users+0x23/0xd0
[ 382.230096] #3: (&(&ffs->eps_lock)->rlock){....}, at: [<
f81e7710>] ffs_aio_cancel+0x20/0x60 [usb_f_fs]
[ 382.230160] Modules linked in: usb_f_fs libcomposite configfs bnep btsdio bluetooth ecdh_generic brcmfmac brcmutil intel_powerclamp coretemp dwc3 kvm_intel ulpi udc_core kvm irqbypass crc32_pclmul crc32c_intel pcbc dwc3_pci aesni_intel aes_i586 crypto_simd cryptd ehci_pci ehci_hcd gpio_keys usbcore basincove_gpadc industrialio usb_common
[ 382.230407] CPU: 1 PID: 1808 Comm: screen Not tainted 4.14.0-edison+ #117
[ 382.230416] Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 542 2015.01.21:18.19.48
[ 382.230425] Call Trace:
[ 382.230438] <SOFTIRQ>
[ 382.230466] dump_stack+0x47/0x62
[ 382.230498] __schedule_bug+0x61/0x80
[ 382.230522] __schedule+0x43/0x7a0
[ 382.230587] schedule+0x5f/0x70
[ 382.230625] dwc3_gadget_ep_dequeue+0x14c/0x270 [dwc3]
[ 382.230669] ? do_wait_intr_irq+0x70/0x70
[ 382.230724] usb_ep_dequeue+0x19/0x90 [udc_core]
[ 382.230770] ffs_aio_cancel+0x37/0x60 [usb_f_fs]
[ 382.230798] kiocb_cancel+0x31/0x40
[ 382.230822] free_ioctx_users+0x4d/0xd0
[ 382.230858] percpu_ref_switch_to_atomic_rcu+0x10a/0x130
[ 382.230881] ? percpu_ref_exit+0x40/0x40
[ 382.230904] rcu_process_callbacks+0x2b3/0x440
[ 382.230965] __do_softirq+0xf8/0x26b
[ 382.231011] ? __softirqentry_text_start+0x8/0x8
[ 382.231033] do_softirq_own_stack+0x22/0x30
[ 382.231042] </SOFTIRQ>
[ 382.231071] irq_exit+0x45/0xc0
[ 382.231089] smp_apic_timer_interrupt+0x13c/0x150
[ 382.231118] apic_timer_interrupt+0x35/0x3c
[ 382.231132] EIP: __copy_user_ll+0xe2/0xf0
[ 382.231142] EFLAGS:
00210293 CPU: 1
[ 382.231154] EAX:
bfd4508c EBX:
00000004 ECX:
00000003 EDX:
f3d8fe50
[ 382.231165] ESI:
f3d8fe51 EDI:
bfd4508d EBP:
f3d8fe14 ESP:
f3d8fe08
[ 382.231176] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[ 382.231265] core_sys_select+0x25f/0x320
[ 382.231346] ? __wake_up_common_lock+0x62/0x80
[ 382.231399] ? tty_ldisc_deref+0x13/0x20
[ 382.231438] ? ldsem_up_read+0x1b/0x40
[ 382.231459] ? tty_ldisc_deref+0x13/0x20
[ 382.231479] ? tty_write+0x29f/0x2e0
[ 382.231514] ? n_tty_ioctl+0xe0/0xe0
[ 382.231541] ? tty_write_unlock+0x30/0x30
[ 382.231566] ? __vfs_write+0x22/0x110
[ 382.231604] ? security_file_permission+0x2f/0xd0
[ 382.231635] ? rw_verify_area+0xac/0x120
[ 382.231677] ? vfs_write+0x103/0x180
[ 382.231711] SyS_select+0x87/0xc0
[ 382.231739] ? SyS_write+0x42/0x90
[ 382.231781] do_fast_syscall_32+0xd6/0x1a0
[ 382.231836] entry_SYSENTER_32+0x47/0x71
[ 382.231848] EIP: 0xb7f75b05
[ 382.231857] EFLAGS:
00000246 CPU: 1
[ 382.231868] EAX:
ffffffda EBX:
00000400 ECX:
bfd4508c EDX:
bfd4510c
[ 382.231878] ESI:
00000000 EDI:
00000000 EBP:
00000000 ESP:
bfd45020
[ 382.231889] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b
[ 382.232281] softirq: huh, entered softirq 9 RCU
c10b4d90 with preempt_count
00000100, exited with
00000000?
Tested-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Heikki Krogerus [Thu, 15 Jun 2017 09:57:30 +0000 (12:57 +0300)]
usb: dwc3: pci: add support for Intel IceLake
[ Upstream commit
00908693c481f7298adf8cf4d2ff3dfbea8c375f ]
PCI IDs for Intel IceLake.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anson Huang [Wed, 30 May 2018 01:30:42 +0000 (09:30 +0800)]
soc: imx: gpcv2: correct PGC offset
[ Upstream commit
3637f12faf507b0a4b8ac1e7115fc99583ab1db3 ]
Correct MIPI/PCIe/USB_HSIC's PGC offset based on
design RTL, the values in the Reference Manual
(Rev. 1, 01/2018 and the older ones) are incorrect.
The correct offset values should be as below:
0x800 ~ 0x83F: PGC for core0 of A7 platform;
0x840 ~ 0x87F: PGC for core1 of A7 platform;
0x880 ~ 0x8BF: PGC for SCU of A7 platform;
0xA00 ~ 0xA3F: PGC for fastmix/megamix;
0xC00 ~ 0xC3F: PGC for MIPI PHY;
0xC40 ~ 0xC7F: PGC for PCIe_PHY;
0xC80 ~ 0xCBF: PGC for USB OTG1 PHY;
0xCC0 ~ 0xCFF: PGC for USB OTG2 PHY;
0xD00 ~ 0xD3F: PGC for USB HSIC PHY;
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Fixes:
03aa12629fc4 ("soc: imx: Add GPCv2 power gating driver")
Acked-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guenter Roeck [Tue, 12 Jun 2018 22:19:35 +0000 (15:19 -0700)]
hwmon: (nct6775) Fix loop limit
[ Upstream commit
91bb8f45f73f19a0150c233c0f11cdeb6d71d1e9 ]
Commit
cc66b3038254 ("hwmon: (nct6775) Rework temperature source and label
handling") changed a loop limit from "data->temp_label_num - 1" to "32",
as part of moving from a string array to a bit mask. This results in the
following error, reported by UBSAN.
UBSAN: Undefined behaviour in drivers/hwmon/nct6775.c:4179:27
shift exponent 32 is too large for 32-bit type 'long unsigned int'
Similar to the original loop, the limit has to be one less than the
number of bits.
Fixes:
cc66b3038254 ("hwmon: (nct6775) Rework temperature source and label handling")
Reported-by: Paul Menzel <pmenzel+linux-hwmon@molgen.mpg.de>
Cc: Paul Menzel <pmenzel+linux-hwmon@molgen.mpg.de>
Tested-by: Paul Menzel <pmenzel+linux-hwmon@molgen.mpg.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexey Brodkin [Fri, 1 Jun 2018 11:34:33 +0000 (14:34 +0300)]
ARC: Explicitly add -mmedium-calls to CFLAGS
[ Upstream commit
74c11e300c103af47db5b658fdcf28002421e250 ]
GCC built for arc*-*-linux has "-mmedium-calls" implicitly enabled by default
thus we don't see any problems during Linux kernel compilation.
----------------------------->8------------------------
arc-linux-gcc -mcpu=arc700 -Q --help=target | grep calls
-mlong-calls [disabled]
-mmedium-calls [enabled]
----------------------------->8------------------------
But if we try to use so-called Elf32 toolchain with GCC configured for
arc*-*-elf* then we'd see the following failure:
----------------------------->8------------------------
init/do_mounts.o: In function 'init_rootfs':
do_mounts.c:(.init.text+0x108): relocation truncated to fit: R_ARC_S21W_PCREL
against symbol 'unregister_filesystem' defined in .text section in fs/filesystems.o
arc-elf32-ld: final link failed: Symbol needs debug section which does not exist
make: *** [vmlinux] Error 1
----------------------------->8------------------------
That happens because neither "-mmedium-calls" nor "-mlong-calls" are enabled in
Elf32 GCC:
----------------------------->8------------------------
arc-elf32-gcc -mcpu=arc700 -Q --help=target | grep calls
-mlong-calls [disabled]
-mmedium-calls [disabled]
----------------------------->8------------------------
Now to make it possible to use Elf32 toolchain for building Linux kernel
we're explicitly add "-mmedium-calls" to CFLAGS.
And since we add "-mmedium-calls" to the global CFLAGS there's no point in
having per-file copies thus removing them.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maciej Purski [Wed, 22 Nov 2017 09:08:38 +0000 (10:08 +0100)]
drm/bridge/sii8620: fix potential buffer overflow
[ Upstream commit
9378cecb1ce5d618b8aff4d65113ddcf72fc1011 ]
Buffer overflow error should not occur, as mode_fixup() callback
filters pixel clock value and it should never exceed 600000. However,
current implementation is not obviously safe and relies on
implementation of mode_fixup().
Make 'i' variable never reach unsafe value in order to avoid buffer
overflow error.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes:
bf1722ca ("drm/bridge/sii8620: rewrite hdmi start sequence")
Signed-off-by: Maciej Purski <m.purski@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1511341718-6974-1-git-send-email-m.purski@samsung.com
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrzej Hajda [Mon, 15 Jan 2018 17:33:57 +0000 (18:33 +0100)]
drm/bridge/sii8620: fix loops in EDID fetch logic
[ Upstream commit
8e627a1b1ce8feb3e1da4428b71b9b4905f04888 ]
Function should constantly check if cable is connected and finish
in finite time.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Maciej Purski <m.purski@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180115173357.31067-4-a.hajda@samsung.com
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christophe Jaillet [Mon, 11 Jun 2018 18:15:11 +0000 (20:15 +0200)]
IB/mlx4: Fix an error handling path in 'mlx4_ib_rereg_user_mr()'
[ Upstream commit
3dc7c7badb7502ec3e3aa817a8bdd9e53aa54c52 ]
Before returning -EPERM we should release some resources, as already done
in the other error handling path of the function.
Fixes:
d8f9cc328c88 ("IB/mlx4: Mark user MR as writable if actual virtual memory is writable")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lucas Stach [Tue, 5 Jun 2018 17:34:54 +0000 (10:34 -0700)]
Input: synaptics-rmi4 - fix axis-swap behavior
[ Upstream commit
645a397d325db6e1bb36588095ae637738b37693 ]
The documentation for the touchscreen-swapped-x-y property states that
swapping is done after inverting if both are used. RMI4 did it the other
way around, leading to inconsistent behavior with regard to other
touchscreens.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Nick Dyer <nick@shmanahar.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jiri Olsa [Wed, 6 Jun 2018 22:15:05 +0000 (00:15 +0200)]
perf tools: Fix error index for pmu event parser
[ Upstream commit
f7fa827f5f432a0b1f34e10fc49da93aeef9f817 ]
For events we provide specific error message we need to set error column
index, PMU parser is missing that, adding it.
Before:
$ perf stat -e cycles,krava/cycles/ kill
event syntax error: 'cycles,krava/cycles/'
\___ Cannot find PMU `krava'. Missing kernel support?
After:
$ perf stat -e cycles,krava/cycles/ kill
event syntax error: 'cycles,krava/cycles/'
\___ Cannot find PMU `krava'. Missing kernel support?
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20180606221513.11302-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dong Jia Shi [Wed, 2 May 2018 07:25:59 +0000 (09:25 +0200)]
vfio: ccw: fix error return in vfio_ccw_sch_event
[ Upstream commit
2c861d89ccda2fbcea9358eff9cc5f8fae548be5 ]
If the device has not been registered, or there is work pending,
we should reschedule a sch_event call again.
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <
20180502072559.50691-1-bjsdjshi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Viresh Kumar [Fri, 25 May 2018 10:31:47 +0000 (16:01 +0530)]
arm: dts: armada: Fix "#cooling-cells" property's name
[ Upstream commit
ac62cc9d9cd6fa4c79e171c13dc8d58c3862b678 ]
It should be "#cooling-cells" instead of "cooling-cells". Fix it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthijs van Duin [Thu, 19 Jul 2018 08:43:46 +0000 (10:43 +0200)]
pty: fix O_CLOEXEC for TIOCGPTPEER
commit
36ecc1481dc8d8c52d43ba18c6b642c1d2fde789 upstream.
It was being ignored because the flags were not passed to fd allocation.
Fixes:
54ebbfb16034 ("tty: add TIOCGPTPEER ioctl")
Signed-off-by: Matthijs van Duin <matthijsvanduin@gmail.com>
Acked-by: Aleksa Sarai <asarai@suse.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Fri, 10 Aug 2018 14:14:26 +0000 (16:14 +0200)]
EDAC: Add missing MEM_LRDDR4 entry in edac_mem_types[]
commit
b748f2de4b2f578599f46c6000683a8da755bf68 upstream.
The edac_mem_types[] array misses a MEM_LRDDR4 entry, which leads to
NULL pointer dereference when accessed via sysfs or such.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20180810141426.8918-1-tiwai@suse.de
Fixes:
1e8096bb2031 ("EDAC: Add LRDDR4 DRAM type")
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gustavo A. R. Silva [Fri, 3 Aug 2018 03:40:19 +0000 (22:40 -0500)]
drm/i915/kvmgt: Fix potential Spectre v1
commit
de5372da605d3bca46e3102bab51b7e1c0e0a6f6 upstream.
info.index can be indirectly controlled by user-space, hence leading
to a potential exploitation of the Spectre variant 1 vulnerability.
This issue was detected with the help of Smatch:
drivers/gpu/drm/i915/gvt/kvmgt.c:1232 intel_vgpu_ioctl() warn:
potential spectre issue 'vgpu->vdev.region' [r]
Fix this by sanitizing info.index before indirectly using it to index
vgpu->vdev.region
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://marc.info/?l=linux-kernel&m=
152449131114778&w=2
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jeremy Cline [Thu, 2 Aug 2018 04:03:40 +0000 (00:03 -0400)]
ext4: fix spectre gadget in ext4_mb_regular_allocator()
commit
1a5d5e5d51e75a5bca67dadbcea8c841934b7b85 upstream.
'ac->ac_g_ex.fe_len' is a user-controlled value which is used in the
derivation of 'ac->ac_2order'. 'ac->ac_2order', in turn, is used to
index arrays which makes it a potential spectre gadget. Fix this by
sanitizing the value assigned to 'ac->ac2_order'. This covers the
following accesses found with the help of smatch:
* fs/ext4/mballoc.c:1896 ext4_mb_simple_scan_group() warn: potential
spectre issue 'grp->bb_counters' [w] (local cap)
* fs/ext4/mballoc.c:445 mb_find_buddy() warn: potential spectre issue
'EXT4_SB(e4b->bd_sb)->s_mb_offsets' [r] (local cap)
* fs/ext4/mballoc.c:446 mb_find_buddy() warn: potential spectre issue
'EXT4_SB(e4b->bd_sb)->s_mb_maxs' [r] (local cap)
Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Jeremy Cline <jcline@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Wed, 22 Aug 2018 05:46:11 +0000 (07:46 +0200)]
Linux 4.14.66
Hangbin Liu [Tue, 14 Aug 2018 09:28:26 +0000 (17:28 +0800)]
cls_matchall: fix tcf_unbind_filter missing
[ Upstream commit
a51c76b4dfb30496dc65396a957ef0f06af7fb22 ]
Fix tcf_unbind_filter missing in cls_matchall as this will trigger
WARN_ON() in cbq_destroy_class().
Fixes:
fd62d9f5c575f ("net/sched: matchall: Fix configuration race")
Reported-by: Li Shuang <shuali@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kees Cook [Wed, 15 Aug 2018 19:14:05 +0000 (12:14 -0700)]
isdn: Disable IIOCDBGVAR
[ Upstream commit
5e22002aa8809e2efab2da95855f73f63e14a36c ]
It was possible to directly leak the kernel address where the isdn_dev
structure pointer was stored. This is a kernel ASLR bypass for anyone
with access to the ioctl. The code had been present since the beginning
of git history, though this shouldn't ever be needed for normal operation,
therefore remove it.
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Karsten Keil <isdn@linux-pingi.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sudip Mukherjee [Sun, 15 Jul 2018 19:36:50 +0000 (20:36 +0100)]
Bluetooth: avoid killing an already killed socket
commit
4e1a720d0312fd510699032c7694a362a010170f upstream.
slub debug reported:
[ 440.648642] =============================================================================
[ 440.648649] BUG kmalloc-1024 (Tainted: G BU O ): Poison overwritten
[ 440.648651] -----------------------------------------------------------------------------
[ 440.648655] INFO: 0xe70f4bec-0xe70f4bec. First byte 0x6a instead of 0x6b
[ 440.648665] INFO: Allocated in sk_prot_alloc+0x6b/0xc6 age=33155 cpu=1 pid=1047
[ 440.648671] ___slab_alloc.constprop.24+0x1fc/0x292
[ 440.648675] __slab_alloc.isra.18.constprop.23+0x1c/0x25
[ 440.648677] __kmalloc+0xb6/0x17f
[ 440.648680] sk_prot_alloc+0x6b/0xc6
[ 440.648683] sk_alloc+0x1e/0xa1
[ 440.648700] sco_sock_alloc.constprop.6+0x26/0xaf [bluetooth]
[ 440.648716] sco_connect_cfm+0x166/0x281 [bluetooth]
[ 440.648731] hci_conn_request_evt.isra.53+0x258/0x281 [bluetooth]
[ 440.648746] hci_event_packet+0x28b/0x2326 [bluetooth]
[ 440.648759] hci_rx_work+0x161/0x291 [bluetooth]
[ 440.648764] process_one_work+0x163/0x2b2
[ 440.648767] worker_thread+0x1a9/0x25c
[ 440.648770] kthread+0xf8/0xfd
[ 440.648774] ret_from_fork+0x2e/0x38
[ 440.648779] INFO: Freed in __sk_destruct+0xd3/0xdf age=3815 cpu=1 pid=1047
[ 440.648782] __slab_free+0x4b/0x27a
[ 440.648784] kfree+0x12e/0x155
[ 440.648787] __sk_destruct+0xd3/0xdf
[ 440.648790] sk_destruct+0x27/0x29
[ 440.648793] __sk_free+0x75/0x91
[ 440.648795] sk_free+0x1c/0x1e
[ 440.648810] sco_sock_kill+0x5a/0x5f [bluetooth]
[ 440.648825] sco_conn_del+0x8e/0xba [bluetooth]
[ 440.648840] sco_disconn_cfm+0x3a/0x41 [bluetooth]
[ 440.648855] hci_event_packet+0x45e/0x2326 [bluetooth]
[ 440.648868] hci_rx_work+0x161/0x291 [bluetooth]
[ 440.648872] process_one_work+0x163/0x2b2
[ 440.648875] worker_thread+0x1a9/0x25c
[ 440.648877] kthread+0xf8/0xfd
[ 440.648880] ret_from_fork+0x2e/0x38
[ 440.648884] INFO: Slab 0xf4718580 objects=27 used=27 fp=0x (null) flags=0x40008100
[ 440.648886] INFO: Object 0xe70f4b88 @offset=19336 fp=0xe70f54f8
When KASAN was enabled, it reported:
[ 210.096613] ==================================================================
[ 210.096634] BUG: KASAN: use-after-free in ex_handler_refcount+0x5b/0x127
[ 210.096641] Write of size 4 at addr
ffff880107e17160 by task kworker/u9:1/2040
[ 210.096651] CPU: 1 PID: 2040 Comm: kworker/u9:1 Tainted: G U O 4.14.47-
20180606+ #2
[ 210.096654] Hardware name: , BIOS
2017.01-00087-g43e04de 08/30/2017
[ 210.096693] Workqueue: hci0 hci_rx_work [bluetooth]
[ 210.096698] Call Trace:
[ 210.096711] dump_stack+0x46/0x59
[ 210.096722] print_address_description+0x6b/0x23b
[ 210.096729] ? ex_handler_refcount+0x5b/0x127
[ 210.096736] kasan_report+0x220/0x246
[ 210.096744] ex_handler_refcount+0x5b/0x127
[ 210.096751] ? ex_handler_clear_fs+0x85/0x85
[ 210.096757] fixup_exception+0x8c/0x96
[ 210.096766] do_trap+0x66/0x2c1
[ 210.096773] do_error_trap+0x152/0x180
[ 210.096781] ? fixup_bug+0x78/0x78
[ 210.096817] ? hci_debugfs_create_conn+0x244/0x26a [bluetooth]
[ 210.096824] ? __schedule+0x113b/0x1453
[ 210.096830] ? sysctl_net_exit+0xe/0xe
[ 210.096837] ? __wake_up_common+0x343/0x343
[ 210.096843] ? insert_work+0x107/0x163
[ 210.096850] invalid_op+0x1b/0x40
[ 210.096888] RIP: 0010:hci_debugfs_create_conn+0x244/0x26a [bluetooth]
[ 210.096892] RSP: 0018:
ffff880094a0f970 EFLAGS:
00010296
[ 210.096898] RAX:
0000000000000000 RBX:
ffff880107e170e8 RCX:
ffff880107e17160
[ 210.096902] RDX:
000000000000002f RSI:
ffff88013b80ed40 RDI:
ffffffffa058b940
[ 210.096906] RBP:
ffff88011b2b0578 R08:
00000000852f0ec9 R09:
ffffffff81cfcf9b
[ 210.096909] R10:
00000000d21bdad7 R11:
0000000000000001 R12:
ffff8800967b0488
[ 210.096913] R13:
ffff880107e17168 R14:
0000000000000068 R15:
ffff8800949c0008
[ 210.096920] ? __sk_destruct+0x2c6/0x2d4
[ 210.096959] hci_event_packet+0xff5/0x7de2 [bluetooth]
[ 210.096969] ? __local_bh_enable_ip+0x43/0x5b
[ 210.097004] ? l2cap_sock_recv_cb+0x158/0x166 [bluetooth]
[ 210.097039] ? hci_le_meta_evt+0x2bb3/0x2bb3 [bluetooth]
[ 210.097075] ? l2cap_ertm_init+0x94e/0x94e [bluetooth]
[ 210.097093] ? xhci_urb_enqueue+0xbd8/0xcf5 [xhci_hcd]
[ 210.097102] ? __accumulate_pelt_segments+0x24/0x33
[ 210.097109] ? __accumulate_pelt_segments+0x24/0x33
[ 210.097115] ? __update_load_avg_se.isra.2+0x217/0x3a4
[ 210.097122] ? set_next_entity+0x7c3/0x12cd
[ 210.097128] ? pick_next_entity+0x25e/0x26c
[ 210.097135] ? pick_next_task_fair+0x2ca/0xc1a
[ 210.097141] ? switch_mm_irqs_off+0x346/0xb4f
[ 210.097147] ? __switch_to+0x769/0xbc4
[ 210.097153] ? compat_start_thread+0x66/0x66
[ 210.097188] ? hci_conn_check_link_mode+0x1cd/0x1cd [bluetooth]
[ 210.097195] ? finish_task_switch+0x392/0x431
[ 210.097228] ? hci_rx_work+0x154/0x487 [bluetooth]
[ 210.097260] hci_rx_work+0x154/0x487 [bluetooth]
[ 210.097269] process_one_work+0x579/0x9e9
[ 210.097277] worker_thread+0x68f/0x804
[ 210.097285] kthread+0x31c/0x32b
[ 210.097292] ? rescuer_thread+0x70c/0x70c
[ 210.097299] ? kthread_create_on_node+0xa3/0xa3
[ 210.097306] ret_from_fork+0x35/0x40
[ 210.097314] Allocated by task 2040:
[ 210.097323] kasan_kmalloc.part.1+0x51/0xc7
[ 210.097328] __kmalloc+0x17f/0x1b6
[ 210.097335] sk_prot_alloc+0xf2/0x1a3
[ 210.097340] sk_alloc+0x22/0x297
[ 210.097375] sco_sock_alloc.constprop.7+0x23/0x202 [bluetooth]
[ 210.097410] sco_connect_cfm+0x2d0/0x566 [bluetooth]
[ 210.097443] hci_conn_request_evt.isra.53+0x6d3/0x762 [bluetooth]
[ 210.097476] hci_event_packet+0x85e/0x7de2 [bluetooth]
[ 210.097507] hci_rx_work+0x154/0x487 [bluetooth]
[ 210.097512] process_one_work+0x579/0x9e9
[ 210.097517] worker_thread+0x68f/0x804
[ 210.097523] kthread+0x31c/0x32b
[ 210.097529] ret_from_fork+0x35/0x40
[ 210.097533] Freed by task 2040:
[ 210.097539] kasan_slab_free+0xb3/0x15e
[ 210.097544] kfree+0x103/0x1a9
[ 210.097549] __sk_destruct+0x2c6/0x2d4
[ 210.097584] sco_conn_del.isra.1+0xba/0x10e [bluetooth]
[ 210.097617] hci_event_packet+0xff5/0x7de2 [bluetooth]
[ 210.097648] hci_rx_work+0x154/0x487 [bluetooth]
[ 210.097653] process_one_work+0x579/0x9e9
[ 210.097658] worker_thread+0x68f/0x804
[ 210.097663] kthread+0x31c/0x32b
[ 210.097670] ret_from_fork+0x35/0x40
[ 210.097676] The buggy address belongs to the object at
ffff880107e170e8
which belongs to the cache kmalloc-1024 of size 1024
[ 210.097681] The buggy address is located 120 bytes inside of
1024-byte region [
ffff880107e170e8,
ffff880107e174e8)
[ 210.097683] The buggy address belongs to the page:
[ 210.097689] page:
ffffea00041f8400 count:1 mapcount:0 mapping: (null) index:0xffff880107e15b68 compound_mapcount: 0
[ 210.110194] flags: 0x8000000000008100(slab|head)
[ 210.115441] raw:
8000000000008100 0000000000000000 ffff880107e15b68 0000000100170016
[ 210.115448] raw:
ffffea0004a47620 ffffea0004b48e20 ffff88013b80ed40 0000000000000000
[ 210.115451] page dumped because: kasan: bad access detected
[ 210.115454] Memory state around the buggy address:
[ 210.115460]
ffff880107e17000: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 210.115465]
ffff880107e17080: fc fc fc fc fc fc fc fc fc fc fc fc fc fb fb fb
[ 210.115469] >
ffff880107e17100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 210.115472] ^
[ 210.115477]
ffff880107e17180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 210.115481]
ffff880107e17200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 210.115483] ==================================================================
And finally when BT_DBG() and ftrace was enabled it showed:
<...>-14979 [001] .... 186.104191: sco_sock_kill <-sco_sock_close
<...>-14979 [001] .... 186.104191: sco_sock_kill <-sco_sock_release
<...>-14979 [001] .... 186.104192: sco_sock_kill: sk
ef0497a0 state 9
<...>-14979 [001] .... 186.104193: bt_sock_unlink <-sco_sock_kill
kworker/u9:2-792 [001] .... 186.104246: sco_sock_kill <-sco_conn_del
kworker/u9:2-792 [001] .... 186.104248: sco_sock_kill: sk
ef0497a0 state 9
kworker/u9:2-792 [001] .... 186.104249: bt_sock_unlink <-sco_sock_kill
kworker/u9:2-792 [001] .... 186.104250: sco_sock_destruct <-__sk_destruct
kworker/u9:2-792 [001] .... 186.104250: sco_sock_destruct: sk
ef0497a0
kworker/u9:2-792 [001] .... 186.104860: hci_conn_del <-hci_event_packet
kworker/u9:2-792 [001] .... 186.104864: hci_conn_del: hci0 hcon
ef0484c0 handle 266
Only in the failed case, sco_sock_kill() gets called with the same sock
pointer two times. Add a check for SOCK_DEAD to avoid continue killing
a socket which has already been killed.
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Tue, 3 Jul 2018 10:05:47 +0000 (12:05 +0200)]
misc: sram: fix resource leaks in probe error path
commit
f294d00961d1d869ecffa60e280eeeee1ccf9a49 upstream.
Make sure to disable clocks and deregister any exported partitions
before returning on late probe errors.
Note that since commit
ee895ccdf776 ("misc: sram: fix enabled clock leak
on error path"), partitions are deliberately exported before enabling
the clock so we stick to that logic here. A follow up patch will address
this.
Cc: stable <stable@vger.kernel.org> # 4.9
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Srinath Mannam [Sat, 28 Jul 2018 15:25:15 +0000 (20:55 +0530)]
serial: 8250_dw: Add ACPI support for uart on Broadcom SoC
commit
784c29eda5b4e28c3a56aa90b3815f9a1b0cfdc1 upstream.
Add ACPI identifier HID for UART DW 8250 on Broadcom SoCs
to match the HID passed through ACPI tables to enable
UART controller.
Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
Reviewed-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Tested-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chen Hu [Fri, 27 Jul 2018 10:32:41 +0000 (18:32 +0800)]
serial: 8250_dw: always set baud rate in dw8250_set_termios
commit
dfcab6ba573445c703235ab6c83758eec12d7f28 upstream.
dw8250_set_termios() doesn't set baud rate if the arg "old ktermios" is
NULL. This happens during resume.
Call Trace:
...
[ 54.928108] dw8250_set_termios+0x162/0x170
[ 54.928114] serial8250_set_termios+0x17/0x20
[ 54.928117] uart_change_speed+0x64/0x160
[ 54.928119] uart_resume_port
...
So the baud rate is not restored after S3 and breaks the apps who use
UART, for example, console and bluetooth etc.
We address this issue by setting the baud rate irrespective of arg
"old", just like the drivers for other 8250 IPs. This is tested with
Intel Broxton platform.
Signed-off-by: Chen Hu <hu1.chen@intel.com>
Fixes:
4e26b134bd17 ("serial: 8250_dw: clock rate handling for all ACPI platforms")
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aaron Sierra [Tue, 24 Jul 2018 19:23:46 +0000 (14:23 -0500)]
serial: 8250_exar: Read INT0 from slave device, too
commit
60ab0fafc4b652fcaf7cbc3bb8555a0cf1149c28 upstream.
The sleep wake-up refactoring that I introduced in
commit
c7e1b4059075 ("tty: serial: exar: Relocate sleep wake-up handling")
did not account for devices with a slave device on the expansion port.
This patch pokes the INT0 register in the slave device, if present, in
order to ensure that MSI interrupts don't get permanently "stuck"
because of a sleep wake-up interrupt as described here:
commit
2c0ac5b48a35 ("serial: exar: Fix stuck MSIs")
This also converts an ioread8() to readb() in order to provide visual
consistency with the MMIO-only accessors used elsewhere in the driver.
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Aaron Sierra <asierra@xes-inc.com>
Fixes:
c7e1b4059075 ("tty: serial: exar: Relocate sleep wake-up handling")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark [Sun, 12 Aug 2018 15:47:16 +0000 (11:47 -0400)]
tty: serial: 8250: Revert NXP SC16C2552 workaround
commit
47ac76662ca9c5852fd353093f19de3ae85f2e66 upstream.
Revert commit
ecb988a3b7985913d1f0112f66667cdd15e40711: tty: serial:
8250: 8250_core: NXP SC16C2552 workaround
The above commit causes userland application to no longer write
correctly its first write to a dumb terminal connected to /dev/ttyS0.
This commit seems to be the culprit. It's as though the TX FIFO is being
reset during that write. What should be displayed is:
PSW
80000000 INST
00000000 HALT
//
What is displayed is some variation of:
T
00000000 HAL//
Reverting this commit via this patch fixes my problem.
Signed-off-by: Mark Hounschell <dmarkh@cfl.rr.com>
Fixes:
ecb988a3b798 ("tty: serial: 8250: 8250_core: NXP SC16C2552 workaround")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Willy Tarreau [Mon, 9 Jul 2018 12:03:55 +0000 (14:03 +0200)]
ACPI / PM: save NVS memory for ASUS 1025C laptop
commit
231f9415001138a000cd0f881c46654b7ea3f8c5 upstream.
Every time I tried to upgrade my laptop from 3.10.x to 4.x I faced an
issue by which the fan would run at full speed upon resume. Bisecting
it showed me the issue was introduced in 3.17 by commit
821d6f0359b0
(ACPI / sleep: Do not save NVS for new machines to accelerate S3). This
code only affects machines built starting as of 2012, but this Asus
1025C laptop was made in 2012 and apparently needs the NVS data to be
saved, otherwise the CPU's thermal state is not properly reported on
resume and the fan runs at full speed upon resume.
Here's a very simple way to check if such a machine is affected :
# cat /sys/class/thermal/thermal_zone0/temp
55000
( now suspend, wait one second and resume )
# cat /sys/class/thermal/thermal_zone0/temp
0
(and after ~15 seconds the fan starts to spin)
Let's apply the same quirk as commit
cbc00c13 (ACPI: save NVS memory
for Lenovo G50-45) and reuse the function it provides. Note that this
commit was already backported to 4.9.x but not 4.4.x.
Cc: 3.17+ <stable@vger.kernel.org> # 3.17+: requires cbc00c13
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aleksander Morgado [Mon, 23 Jul 2018 23:34:01 +0000 (01:34 +0200)]
USB: option: add support for DW5821e
commit
7bab01ecc6c43da882333c6db39741cb43677004 upstream.
The device exposes AT, NMEA and DIAG ports in both USB configurations.
The patch explicitly ignores interfaces 0 and 1, as they're bound to
other drivers already; and also interface 6, which is a GNSS interface
for which we don't have a driver yet.
T: Bus=01 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#= 18 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 2
P: Vendor=413c ProdID=81d7 Rev=03.18
S: Manufacturer=DELL
S: Product=DW5821e Snapdragon X20 LTE
S: SerialNumber=
0123456789ABCDEF
C: #Ifs= 7 Cfg#= 2 Atr=a0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I: If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
T: Bus=01 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 2
P: Vendor=413c ProdID=81d7 Rev=03.18
S: Manufacturer=DELL
S: Product=DW5821e Snapdragon X20 LTE
S: SerialNumber=
0123456789ABCDEF
C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I: If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Movie Song [Wed, 18 Jul 2018 18:20:48 +0000 (02:20 +0800)]
USB: serial: pl2303: add a new device id for ATEN
commit
29c692c96b3a39cd1911fb79cd2505af8d070f07 upstream.
Signed-off-by: Movie Song <MovieSong@aten-itlab.cn>
Cc: Johan Hovold <johan@kernel.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Ogness [Sat, 23 Jun 2018 22:32:11 +0000 (00:32 +0200)]
USB: serial: sierra: fix potential deadlock at close
commit
e60870012e5a35b1506d7b376fddfb30e9da0b27 upstream.
The portdata spinlock can be taken in interrupt context (via
sierra_outdat_callback()).
Disable interrupts when taking the portdata spinlock when discarding
deferred URBs during close to prevent a possible deadlock.
Fixes:
014333f77c0b ("USB: sierra: fix urb and memory leak on disconnect")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
[ johan: amend commit message and add fixes and stable tags ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Wed, 25 Jul 2018 15:11:38 +0000 (17:11 +0200)]
ALSA: vxpocket: Fix invalid endian conversions
commit
3acd3e3bab95ec3622ff98da313290ee823a0f68 upstream.
The endian conversions used in vxp_dma_read() and vxp_dma_write() are
superfluous and even wrong on big-endian machines, as inw() and outw()
already do conversions. Kill them.
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Thu, 19 Jul 2018 09:01:04 +0000 (11:01 +0200)]
ALSA: memalloc: Don't exceed over the requested size
commit
dfef01e150824b0e6da750cacda8958188d29aea upstream.
snd_dma_alloc_pages_fallback() tries to allocate pages again when the
allocation fails with reduced size. But the first try actually
*increases* the size to power-of-two, which may give back a larger
chunk than the requested size. This confuses the callers, e.g. sgbuf
assumes that the size is equal or less, and it may result in a bad
loop due to the underflow and eventually lead to Oops.
The code of this function seems incorrectly assuming the usage of
get_order(). We need to decrease at first, then align to
power-of-two.
Reported-and-tested-by: he, bo <bo.he@intel.com>
Reported-by: zhang jun <jun.zhang@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Thu, 2 Aug 2018 12:04:45 +0000 (14:04 +0200)]
ALSA: hda: Correct Asrock B85M-ITX power_save blacklist entry
commit
8e82a728792bf66b9f0a29c9d4c4b0630f7b9c79 upstream.
I added the subsys product-id for the HDMI HDA device rather then for
the PCH one, this commit fixes this.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1525104
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Wed, 25 Jul 2018 15:59:26 +0000 (17:59 +0200)]
ALSA: cs5535audio: Fix invalid endian conversion
commit
69756930f2de0457d51db7d505a1e4f40e9fd116 upstream.
One place in cs5535audio_build_dma_packets() does an extra conversion
via cpu_to_le32(); namely jmpprd_addr is passed to setup_prd() ops,
which writes the value via cs_writel(). That is, the callback does
the conversion by itself, and we don't need to convert beforehand.
This patch fixes that bogus conversion.
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Thu, 26 Jul 2018 12:27:59 +0000 (14:27 +0200)]
ALSA: virmidi: Fix too long output trigger loop
commit
50e9ffb1996a5d11ff5040a266585bad4ceeca0a upstream.
The virmidi output trigger tries to parse the all available bytes and
process sequencer events as much as possible. In a normal situation,
this is supposed to be relatively short, but a program may give a huge
buffer and it'll take a long time in a single spin lock, which may
eventually lead to a soft lockup.
This patch simply adds a workaround, a cond_resched() call in the loop
if applicable. A better solution would be to move the event processor
into a work, but let's put a duct-tape quickly at first.
Reported-and-tested-by: Dae R. Jeong <threeearcat@gmail.com>
Reported-by: syzbot+619d9f40141d826b097e@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Wed, 25 Jul 2018 15:10:11 +0000 (17:10 +0200)]
ALSA: vx222: Fix invalid endian conversions
commit
fff71a4c050ba46e305d910c837b99ba1728135e upstream.
The endian conversions used in vx2_dma_read() and vx2_dma_write() are
superfluous and even wrong on big-endian machines, as inl() and outl()
already do conversions. Kill them.
Spotted by sparse, a warning like:
sound/pci/vx222/vx222_ops.c:278:30: warning: incorrect type in argument 1 (different base types)
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Park Ju Hyung [Fri, 27 Jul 2018 18:16:21 +0000 (03:16 +0900)]
ALSA: hda - Turn CX8200 into D3 as well upon reboot
commit
d77a4b4a5b0b2ebcbc9840995d91311ef28302ab upstream.
As an equivalent codec with CX20724,
CX8200 is also subject to the reboot bug.
Late 2017 and 2018 LG Gram and some HP Spectre laptops are known victims
to this issue, causing extremely loud noises upon reboot.
Now that we know that this bug is subject to multiple codecs,
fix the comment as well.
Signed-off-by: Park Ju Hyung <qkrwngud825@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Park Ju Hyung [Fri, 27 Jul 2018 18:16:42 +0000 (03:16 +0900)]
ALSA: hda - Sleep for 10ms after entering D3 on Conexant codecs
commit
f59cf9a0551dd954ad8b752461cf19d9789f4b1d upstream.
On rare occasions, we are still noticing that the internal speaker
spitting out spurious noises even after adding the problematic codec
to the list.
Adding a 10ms artificial delay before rebooting fixes the issue entirely.
Patch for Realtek codecs also adds the same amount of delay after
entering D3.
Signed-off-by: Park Ju Hyung <qkrwngud825@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Bogdanov [Wed, 8 Aug 2018 11:06:32 +0000 (14:06 +0300)]
net: aquantia: Fix IFF_ALLMULTI flag functionality
[ Upstream commit
11ba961c916127651e12af6cad3891f8aeb25aa9 ]
It was noticed that NIC always pass all multicast traffic to the host
regardless of IFF_ALLMULTI flag on the interface.
The rule in MC Filter Table in NIC, that is configured to accept any
multicast packets, is turning on if IFF_MULTICAST flag is set on the
interface. It leads to passing all multicast traffic to the host.
This fix changes the condition to turn on that rule by checking
IFF_ALLMULTI flag as it should.
Fixes:
b21f502f84be ("net:ethernet:aquantia: Fix for multicast filter handling.")
Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xin Long [Sun, 5 Aug 2018 14:46:07 +0000 (22:46 +0800)]
ip6_tunnel: use the right value for ipv4 min mtu check in ip6_tnl_xmit
[ Upstream commit
82a40777de12728dedf4075453b694f0d1baee80 ]
According to RFC791, 68 bytes is the minimum size of IPv4 datagram every
device must be able to forward without further fragmentation while 576
bytes is the minimum size of IPv4 datagram every device has to be able
to receive, so in ip6_tnl_xmit(), 68(IPV4_MIN_MTU) should be the right
value for the ipv4 min mtu check in ip6_tnl_xmit.
While at it, change to use max() instead of if statement.
Fixes:
c9fefa08190f ("ip6_tunnel: get the min mtu properly in ip6_tnl_xmit")
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jason Wang [Wed, 8 Aug 2018 03:43:04 +0000 (11:43 +0800)]
vhost: reset metadata cache when initializing new IOTLB
[ Upstream commit
b13f9c6364373a1b9f71e9846dc4fb199296f926 ]
We need to reset metadata cache during new IOTLB initialization,
otherwise the stale pointers to previous IOTLB may be still accessed
which will lead a use after free.
Reported-by: syzbot+c51e6736a1bf614b3272@syzkaller.appspotmail.com
Fixes:
f88949138058 ("vhost: introduce O(1) vq metadata cache")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hangbin Liu [Mon, 13 Aug 2018 10:44:04 +0000 (18:44 +0800)]
net_sched: Fix missing res info when create new tc_index filter
[ Upstream commit
008369dcc5f7bfba526c98054f8525322acf0ea3 ]
Li Shuang reported the following warn:
[ 733.484610] WARNING: CPU: 6 PID: 21123 at net/sched/sch_cbq.c:1418 cbq_destroy_class+0x5d/0x70 [sch_cbq]
[ 733.495190] Modules linked in: sch_cbq cls_tcindex sch_dsmark rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat l
[ 733.574155] syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm igb ixgbe ahci libahci i2c_algo_bit libata i40e i2c_core dca mdio megaraid_sas dm_mirror dm_region_hash dm_log dm_mod
[ 733.592500] CPU: 6 PID: 21123 Comm: tc Not tainted 4.18.0-rc8.latest+ #131
[ 733.600169] Hardware name: Dell Inc. PowerEdge R730/0WCJNT, BIOS 2.1.5 04/11/2016
[ 733.608518] RIP: 0010:cbq_destroy_class+0x5d/0x70 [sch_cbq]
[ 733.614734] Code: e7 d9 d2 48 8b 7b 48 e8 61 05 da d2 48 8d bb f8 00 00 00 e8 75 ae d5 d2 48 39 eb 74 0a 48 89 df 5b 5d e9 16 6c 94 d2 5b 5d c3 <0f> 0b eb b6 0f 1f 44 00 00 66 2e 0f 1f 84
[ 733.635798] RSP: 0018:
ffffbfbb066bb9d8 EFLAGS:
00010202
[ 733.641627] RAX:
0000000000000001 RBX:
ffff9cdd17392800 RCX:
000000008010000f
[ 733.649588] RDX:
ffff9cdd1df547e0 RSI:
ffff9cdd17392800 RDI:
ffff9cdd0f84c800
[ 733.657547] RBP:
ffff9cdd0f84c800 R08:
0000000000000001 R09:
0000000000000000
[ 733.665508] R10:
ffff9cdd0f84d000 R11:
0000000000000001 R12:
0000000000000001
[ 733.673469] R13:
0000000000000000 R14:
0000000000000001 R15:
ffff9cdd17392200
[ 733.681430] FS:
00007f911890a740(0000) GS:
ffff9cdd1f8c0000(0000) knlGS:
0000000000000000
[ 733.690456] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 733.696864] CR2:
0000000000b5544c CR3:
0000000859374002 CR4:
00000000001606e0
[ 733.704826] Call Trace:
[ 733.707554] cbq_destroy+0xa1/0xd0 [sch_cbq]
[ 733.712318] qdisc_destroy+0x62/0x130
[ 733.716401] dsmark_destroy+0x2a/0x70 [sch_dsmark]
[ 733.721745] qdisc_destroy+0x62/0x130
[ 733.725829] qdisc_graft+0x3ba/0x470
[ 733.729817] tc_get_qdisc+0x2a6/0x2c0
[ 733.733901] ? cred_has_capability+0x7d/0x130
[ 733.738761] rtnetlink_rcv_msg+0x263/0x2d0
[ 733.743330] ? rtnl_calcit.isra.30+0x110/0x110
[ 733.748287] netlink_rcv_skb+0x4d/0x130
[ 733.752576] netlink_unicast+0x1a3/0x250
[ 733.756949] netlink_sendmsg+0x2ae/0x3a0
[ 733.761324] sock_sendmsg+0x36/0x40
[ 733.765213] ___sys_sendmsg+0x26f/0x2d0
[ 733.769493] ? handle_pte_fault+0x586/0xdf0
[ 733.774158] ? __handle_mm_fault+0x389/0x500
[ 733.778919] ? __sys_sendmsg+0x5e/0xa0
[ 733.783099] __sys_sendmsg+0x5e/0xa0
[ 733.787087] do_syscall_64+0x5b/0x180
[ 733.791171] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 733.796805] RIP: 0033:0x7f9117f23f10
[ 733.800791] Code: c3 48 8b 05 82 6f 2c 00 f7 db 64 89 18 48 83 cb ff eb dd 0f 1f 80 00 00 00 00 83 3d 8d d0 2c 00 00 75 10 b8 2e 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8
[ 733.821873] RSP: 002b:
00007ffe96818398 EFLAGS:
00000246 ORIG_RAX:
000000000000002e
[ 733.830319] RAX:
ffffffffffffffda RBX:
000000005b71244c RCX:
00007f9117f23f10
[ 733.838280] RDX:
0000000000000000 RSI:
00007ffe968183e0 RDI:
0000000000000003
[ 733.846241] RBP:
00007ffe968183e0 R08:
000000000000ffff R09:
0000000000000003
[ 733.854202] R10:
00007ffe96817e20 R11:
0000000000000246 R12:
0000000000000000
[ 733.862161] R13:
0000000000662ee0 R14:
0000000000000000 R15:
0000000000000000
[ 733.870121] ---[ end trace
28edd4aad712ddca ]---
This is because we didn't update f->result.res when create new filter. Then in
tcindex_delete() -> tcf_unbind_filter(), we will failed to find out the res
and unbind filter, which will trigger the WARN_ON() in cbq_destroy_class().
Fix it by updating f->result.res when create new filter.
Fixes:
6e0565697a106 ("net_sched: fix another crash in cls_tcindex")
Reported-by: Li Shuang <shuali@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cong Wang [Mon, 6 Aug 2018 18:06:02 +0000 (11:06 -0700)]
vsock: split dwork to avoid reinitializations
[ Upstream commit
455f05ecd2b219e9a216050796d30c830d9bc393 ]
syzbot reported that we reinitialize an active delayed
work in vsock_stream_connect():
ODEBUG: init active (active state 0) object type: timer_list hint:
delayed_work_timer_fn+0x0/0x90 kernel/workqueue.c:1414
WARNING: CPU: 1 PID: 11518 at lib/debugobjects.c:329
debug_print_object+0x16a/0x210 lib/debugobjects.c:326
The pattern is apparently wrong, we should only initialize
the dealyed work once and could repeatly schedule it. So we
have to move out the initializations to allocation side.
And to avoid confusion, we can split the shared dwork
into two, instead of re-using the same one.
Fixes:
d021c344051a ("VSOCK: Introduce VM Sockets")
Reported-by: <syzbot+8a9b1bd330476a4f3db6@syzkaller.appspotmail.com>
Cc: Andy king <acking@vmware.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hangbin Liu [Mon, 13 Aug 2018 10:44:03 +0000 (18:44 +0800)]
net_sched: fix NULL pointer dereference when delete tcindex filter
[ Upstream commit
2df8bee5654bb2b7312662ca6810d4dc16b0b67f ]
Li Shuang reported the following crash:
[ 71.267724] BUG: unable to handle kernel NULL pointer dereference at
0000000000000004
[ 71.276456] PGD
800000085d9bd067 P4D
800000085d9bd067 PUD
859a0b067 PMD 0
[ 71.284127] Oops: 0000 [#1] SMP PTI
[ 71.288015] CPU: 12 PID: 2386 Comm: tc Not tainted 4.18.0-rc8.latest+ #131
[ 71.295686] Hardware name: Dell Inc. PowerEdge R730/0WCJNT, BIOS 2.1.5 04/11/2016
[ 71.304037] RIP: 0010:tcindex_delete+0x72/0x280 [cls_tcindex]
[ 71.310446] Code: 00 31 f6 48 87 75 20 48 85 f6 74 11 48 8b 47 18 48 8b 40 08 48 8b 40 50 e8 fb a6 f8 fc 48 85 db 0f 84 dc 00 00 00 48 8b 73 18 <8b> 56 04 48 8d 7e 04 85 d2 0f 84 7b 01 00
[ 71.331517] RSP: 0018:
ffffb45207b3f898 EFLAGS:
00010282
[ 71.337345] RAX:
ffff8ad3d72d6360 RBX:
ffff8acc84393680 RCX:
000000000000002e
[ 71.345306] RDX:
ffff8ad3d72c8570 RSI:
0000000000000000 RDI:
ffff8ad847a45800
[ 71.353277] RBP:
ffff8acc84393688 R08:
ffff8ad3d72c8400 R09:
0000000000000000
[ 71.361238] R10:
ffff8ad3de786e00 R11:
0000000000000000 R12:
ffffb45207b3f8c7
[ 71.369199] R13:
ffff8ad3d93bd2a0 R14:
000000000000002e R15:
ffff8ad3d72c9600
[ 71.377161] FS:
00007f9d3ec3e740(0000) GS:
ffff8ad3df980000(0000) knlGS:
0000000000000000
[ 71.386188] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 71.392597] CR2:
0000000000000004 CR3:
0000000852f06003 CR4:
00000000001606e0
[ 71.400558] Call Trace:
[ 71.403299] tcindex_destroy_element+0x25/0x40 [cls_tcindex]
[ 71.409611] tcindex_walk+0xbb/0x110 [cls_tcindex]
[ 71.414953] tcindex_destroy+0x44/0x90 [cls_tcindex]
[ 71.420492] ? tcindex_delete+0x280/0x280 [cls_tcindex]
[ 71.426323] tcf_proto_destroy+0x16/0x40
[ 71.430696] tcf_chain_flush+0x51/0x70
[ 71.434876] tcf_block_put_ext.part.30+0x8f/0x1b0
[ 71.440122] tcf_block_put+0x4d/0x70
[ 71.444108] cbq_destroy+0x4d/0xd0 [sch_cbq]
[ 71.448869] qdisc_destroy+0x62/0x130
[ 71.452951] dsmark_destroy+0x2a/0x70 [sch_dsmark]
[ 71.458300] qdisc_destroy+0x62/0x130
[ 71.462373] qdisc_graft+0x3ba/0x470
[ 71.466359] tc_get_qdisc+0x2a6/0x2c0
[ 71.470443] ? cred_has_capability+0x7d/0x130
[ 71.475307] rtnetlink_rcv_msg+0x263/0x2d0
[ 71.479875] ? rtnl_calcit.isra.30+0x110/0x110
[ 71.484832] netlink_rcv_skb+0x4d/0x130
[ 71.489109] netlink_unicast+0x1a3/0x250
[ 71.493482] netlink_sendmsg+0x2ae/0x3a0
[ 71.497859] sock_sendmsg+0x36/0x40
[ 71.501748] ___sys_sendmsg+0x26f/0x2d0
[ 71.506029] ? handle_pte_fault+0x586/0xdf0
[ 71.510694] ? __handle_mm_fault+0x389/0x500
[ 71.515457] ? __sys_sendmsg+0x5e/0xa0
[ 71.519636] __sys_sendmsg+0x5e/0xa0
[ 71.523626] do_syscall_64+0x5b/0x180
[ 71.527711] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 71.533345] RIP: 0033:0x7f9d3e257f10
[ 71.537331] Code: c3 48 8b 05 82 6f 2c 00 f7 db 64 89 18 48 83 cb ff eb dd 0f 1f 80 00 00 00 00 83 3d 8d d0 2c 00 00 75 10 b8 2e 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8
[ 71.558401] RSP: 002b:
00007fff6f893398 EFLAGS:
00000246 ORIG_RAX:
000000000000002e
[ 71.566848] RAX:
ffffffffffffffda RBX:
000000005b71274d RCX:
00007f9d3e257f10
[ 71.574810] RDX:
0000000000000000 RSI:
00007fff6f8933e0 RDI:
0000000000000003
[ 71.582770] RBP:
00007fff6f8933e0 R08:
000000000000ffff R09:
0000000000000003
[ 71.590729] R10:
00007fff6f892e20 R11:
0000000000000246 R12:
0000000000000000
[ 71.598689] R13:
0000000000662ee0 R14:
0000000000000000 R15:
0000000000000000
[ 71.606651] Modules linked in: sch_cbq cls_tcindex sch_dsmark xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_coni
[ 71.685425] libahci i2c_algo_bit i2c_core i40e libata dca mdio megaraid_sas dm_mirror dm_region_hash dm_log dm_mod
[ 71.697075] CR2:
0000000000000004
[ 71.700792] ---[ end trace
f604eb1acacd978b ]---
Reproducer:
tc qdisc add dev lo handle 1:0 root dsmark indices 64 set_tc_index
tc filter add dev lo parent 1:0 protocol ip prio 1 tcindex mask 0xfc shift 2
tc qdisc add dev lo parent 1:0 handle 2:0 cbq bandwidth 10Mbit cell 8 avpkt 1000 mpu 64
tc class add dev lo parent 2:0 classid 2:1 cbq bandwidth 10Mbit rate 1500Kbit avpkt 1000 prio 1 bounded isolated allot 1514 weight 1 maxburst 10
tc filter add dev lo parent 2:0 protocol ip prio 1 handle 0x2e tcindex classid 2:1 pass_on
tc qdisc add dev lo parent 2:1 pfifo limit 5
tc qdisc del dev lo root
This is because in tcindex_set_parms, when there is no old_r, we set new
exts to cr.exts. And we didn't set it to filter when r == &new_filter_result.
Then in tcindex_delete() -> tcf_exts_get_net(), we will get NULL pointer
dereference as we didn't init exts.
Fix it by moving tcf_exts_change() after "if (old_r && old_r != r)" check.
Then we don't need "cr" as there is no errout after that.
Fixes:
bf63ac73b3e13 ("net_sched: fix an oops in tcindex filter")
Reported-by: Li Shuang <shuali@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cong Wang [Tue, 7 Aug 2018 19:41:38 +0000 (12:41 -0700)]
llc: use refcount_inc_not_zero() for llc_sap_find()
[ Upstream commit
0dcb82254d65f72333aa50ad626d1e9665ad093b ]
llc_sap_put() decreases the refcnt before deleting sap
from the global list. Therefore, there is a chance
llc_sap_find() could find a sap with zero refcnt
in this global list.
Close this race condition by checking if refcnt is zero
or not in llc_sap_find(), if it is zero then it is being
removed so we can just treat it as gone.
Reported-by: <syzbot+278893f3f7803871f7ce@syzkaller.appspotmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wei Wang [Fri, 10 Aug 2018 18:14:56 +0000 (11:14 -0700)]
l2tp: use sk_dst_check() to avoid race on sk->sk_dst_cache
[ Upstream commit
6d37fa49da1e8db8fb1995be22ac837ca41ac8a8 ]
In l2tp code, if it is a L2TP_UDP_ENCAP tunnel, tunnel->sk points to a
UDP socket. User could call sendmsg() on both this tunnel and the UDP
socket itself concurrently. As l2tp_xmit_skb() holds socket lock and call
__sk_dst_check() to refresh sk->sk_dst_cache, while udpv6_sendmsg() is
lockless and call sk_dst_check() to refresh sk->sk_dst_cache, there
could be a race and cause the dst cache to be freed multiple times.
So we fix l2tp side code to always call sk_dst_check() to garantee
xchg() is called when refreshing sk->sk_dst_cache to avoid race
conditions.
Syzkaller reported stack trace:
BUG: KASAN: use-after-free in atomic_read include/asm-generic/atomic-instrumented.h:21 [inline]
BUG: KASAN: use-after-free in atomic_fetch_add_unless include/linux/atomic.h:575 [inline]
BUG: KASAN: use-after-free in atomic_add_unless include/linux/atomic.h:597 [inline]
BUG: KASAN: use-after-free in dst_hold_safe include/net/dst.h:308 [inline]
BUG: KASAN: use-after-free in ip6_hold_safe+0xe6/0x670 net/ipv6/route.c:1029
Read of size 4 at addr
ffff8801aea9a880 by task syz-executor129/4829
CPU: 0 PID: 4829 Comm: syz-executor129 Not tainted 4.18.0-rc7-next-
20180802+ #30
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113
print_address_description+0x6c/0x20b mm/kasan/report.c:256
kasan_report_error mm/kasan/report.c:354 [inline]
kasan_report.cold.7+0x242/0x30d mm/kasan/report.c:412
check_memory_region_inline mm/kasan/kasan.c:260 [inline]
check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267
kasan_check_read+0x11/0x20 mm/kasan/kasan.c:272
atomic_read include/asm-generic/atomic-instrumented.h:21 [inline]
atomic_fetch_add_unless include/linux/atomic.h:575 [inline]
atomic_add_unless include/linux/atomic.h:597 [inline]
dst_hold_safe include/net/dst.h:308 [inline]
ip6_hold_safe+0xe6/0x670 net/ipv6/route.c:1029
rt6_get_pcpu_route net/ipv6/route.c:1249 [inline]
ip6_pol_route+0x354/0xd20 net/ipv6/route.c:1922
ip6_pol_route_output+0x54/0x70 net/ipv6/route.c:2098
fib6_rule_lookup+0x283/0x890 net/ipv6/fib6_rules.c:122
ip6_route_output_flags+0x2c5/0x350 net/ipv6/route.c:2126
ip6_dst_lookup_tail+0x1278/0x1da0 net/ipv6/ip6_output.c:978
ip6_dst_lookup_flow+0xc8/0x270 net/ipv6/ip6_output.c:1079
ip6_sk_dst_lookup_flow+0x5ed/0xc50 net/ipv6/ip6_output.c:1117
udpv6_sendmsg+0x2163/0x36b0 net/ipv6/udp.c:1354
inet_sendmsg+0x1a1/0x690 net/ipv4/af_inet.c:798
sock_sendmsg_nosec net/socket.c:622 [inline]
sock_sendmsg+0xd5/0x120 net/socket.c:632
___sys_sendmsg+0x51d/0x930 net/socket.c:2115
__sys_sendmmsg+0x240/0x6f0 net/socket.c:2210
__do_sys_sendmmsg net/socket.c:2239 [inline]
__se_sys_sendmmsg net/socket.c:2236 [inline]
__x64_sys_sendmmsg+0x9d/0x100 net/socket.c:2236
do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x446a29
Code: e8 ac b8 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:
00007f4de5532db8 EFLAGS:
00000246 ORIG_RAX:
0000000000000133
RAX:
ffffffffffffffda RBX:
00000000006dcc38 RCX:
0000000000446a29
RDX:
00000000000000b8 RSI:
0000000020001b00 RDI:
0000000000000003
RBP:
00000000006dcc30 R08:
00007f4de5533700 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000246 R12:
00000000006dcc3c
R13:
00007ffe2b830fdf R14:
00007f4de55339c0 R15:
0000000000000001
Fixes:
71b1391a4128 ("l2tp: ensure sk->dst is still valid")
Reported-by: syzbot+05f840f3b04f211bad55@syzkaller.appspotmail.com
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Cc: Guillaume Nault <g.nault@alphalink.fr>
Cc: David Ahern <dsahern@gmail.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexey Kodanev [Tue, 7 Aug 2018 17:03:57 +0000 (20:03 +0300)]
dccp: fix undefined behavior with 'cwnd' shift in ccid2_cwnd_restart()
[ Upstream commit
61ef4b07fcdc30535889990cf4229766502561cf ]
The shift of 'cwnd' with '(now - hc->tx_lsndtime) / hc->tx_rto' value
can lead to undefined behavior [1].
In order to fix this use a gradual shift of the window with a 'while'
loop, similar to what tcp_cwnd_restart() is doing.
When comparing delta and RTO there is a minor difference between TCP
and DCCP, the last one also invokes dccp_cwnd_restart() and reduces
'cwnd' if delta equals RTO. That case is preserved in this change.
[1]:
[40850.963623] UBSAN: Undefined behaviour in net/dccp/ccids/ccid2.c:237:7
[40851.043858] shift exponent 67 is too large for 32-bit type 'unsigned int'
[40851.127163] CPU: 3 PID: 15940 Comm: netstress Tainted: G W E 4.18.0-rc7.x86_64 #1
...
[40851.377176] Call Trace:
[40851.408503] dump_stack+0xf1/0x17b
[40851.451331] ? show_regs_print_info+0x5/0x5
[40851.503555] ubsan_epilogue+0x9/0x7c
[40851.548363] __ubsan_handle_shift_out_of_bounds+0x25b/0x2b4
[40851.617109] ? __ubsan_handle_load_invalid_value+0x18f/0x18f
[40851.686796] ? xfrm4_output_finish+0x80/0x80
[40851.739827] ? lock_downgrade+0x6d0/0x6d0
[40851.789744] ? xfrm4_prepare_output+0x160/0x160
[40851.845912] ? ip_queue_xmit+0x810/0x1db0
[40851.895845] ? ccid2_hc_tx_packet_sent+0xd36/0x10a0 [dccp]
[40851.963530] ccid2_hc_tx_packet_sent+0xd36/0x10a0 [dccp]
[40852.029063] dccp_xmit_packet+0x1d3/0x720 [dccp]
[40852.086254] dccp_write_xmit+0x116/0x1d0 [dccp]
[40852.142412] dccp_sendmsg+0x428/0xb20 [dccp]
[40852.195454] ? inet_dccp_listen+0x200/0x200 [dccp]
[40852.254833] ? sched_clock+0x5/0x10
[40852.298508] ? sched_clock+0x5/0x10
[40852.342194] ? inet_create+0xdf0/0xdf0
[40852.388988] sock_sendmsg+0xd9/0x160
...
Fixes:
113ced1f52e5 ("dccp ccid-2: Perform congestion-window validation")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Sat, 18 Aug 2018 08:48:00 +0000 (10:48 +0200)]
Linux 4.14.65
Sean Christopherson [Fri, 17 Aug 2018 17:27:36 +0000 (10:27 -0700)]
x86/speculation/l1tf: Exempt zeroed PTEs from inversion
commit
f19f5c49bbc3ffcc9126cc245fc1b24cc29f4a37 upstream.
It turns out that we should *not* invert all not-present mappings,
because the all zeroes case is obviously special.
clear_page() does not undergo the XOR logic to invert the address bits,
i.e. PTE, PMD and PUD entries that have not been individually written
will have val=0 and so will trigger __pte_needs_invert(). As a result,
{pte,pmd,pud}_pfn() will return the wrong PFN value, i.e. all ones
(adjusted by the max PFN mask) instead of zero. A zeroed entry is ok
because the page at physical address 0 is reserved early in boot
specifically to mitigate L1TF, so explicitly exempt them from the
inversion when reading the PFN.
Manifested as an unexpected mprotect(..., PROT_NONE) failure when called
on a VMA that has VM_PFNMAP and was mmap'd to as something other than
PROT_NONE but never used. mprotect() sends the PROT_NONE request down
prot_none_walk(), which walks the PTEs to check the PFNs.
prot_none_pte_entry() gets the bogus PFN from pte_pfn() and returns
-EACCES because it thinks mprotect() is trying to adjust a high MMIO
address.
[ This is a very modified version of Sean's original patch, but all
credit goes to Sean for doing this and also pointing out that
sometimes the __pte_needs_invert() function only gets the protection
bits, not the full eventual pte. But zero remains special even in
just protection bits, so that's ok. - Linus ]
Fixes:
f22cc87f6c1f ("x86/speculation/l1tf: Invert all not present mappings")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Fri, 17 Aug 2018 19:01:12 +0000 (21:01 +0200)]
Linux 4.14.64
Toshi Kani [Wed, 27 Jun 2018 14:13:48 +0000 (08:13 -0600)]
x86/mm: Add TLB purge to free pmd/pte page interfaces
commit
5e0fb5df2ee871b841f96f9cb6a7f2784e96aa4e upstream.
ioremap() calls pud_free_pmd_page() / pmd_free_pte_page() when it creates
a pud / pmd map. The following preconditions are met at their entry.
- All pte entries for a target pud/pmd address range have been cleared.
- System-wide TLB purges have been peformed for a target pud/pmd address
range.
The preconditions assure that there is no stale TLB entry for the range.
Speculation may not cache TLB entries since it requires all levels of page
entries, including ptes, to have P & A-bits set for an associated address.
However, speculation may cache pud/pmd entries (paging-structure caches)
when they have P-bit set.
Add a system-wide TLB purge (INVLPG) to a single page after clearing
pud/pmd entry's P-bit.
SDM 4.10.4.1, Operation that Invalidate TLBs and Paging-Structure Caches,
states that:
INVLPG invalidates all paging-structure caches associated with the
current PCID regardless of the liner addresses to which they correspond.
Fixes:
28ee90fe6048 ("x86/mm: implement free pmd/pte page interfaces")
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: mhocko@suse.com
Cc: akpm@linux-foundation.org
Cc: hpa@zytor.com
Cc: cpandya@codeaurora.org
Cc: linux-mm@kvack.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: Joerg Roedel <joro@8bytes.org>
Cc: stable@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20180627141348.21777-4-toshi.kani@hpe.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chintan Pandya [Wed, 27 Jun 2018 14:13:47 +0000 (08:13 -0600)]
ioremap: Update pgtable free interfaces with addr
commit
785a19f9d1dd8a4ab2d0633be4656653bd3de1fc upstream.
The following kernel panic was observed on ARM64 platform due to a stale
TLB entry.
1. ioremap with 4K size, a valid pte page table is set.
2. iounmap it, its pte entry is set to 0.
3. ioremap the same address with 2M size, update its pmd entry with
a new value.
4. CPU may hit an exception because the old pmd entry is still in TLB,
which leads to a kernel panic.
Commit
b6bdb7517c3d ("mm/vmalloc: add interfaces to free unmapped page
table") has addressed this panic by falling to pte mappings in the above
case on ARM64.
To support pmd mappings in all cases, TLB purge needs to be performed
in this case on ARM64.
Add a new arg, 'addr', to pud_free_pmd_page() and pmd_free_pte_page()
so that TLB purge can be added later in seprate patches.
[toshi.kani@hpe.com: merge changes, rewrite patch description]
Fixes:
28ee90fe6048 ("x86/mm: implement free pmd/pte page interfaces")
Signed-off-by: Chintan Pandya <cpandya@codeaurora.org>
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: mhocko@suse.com
Cc: akpm@linux-foundation.org
Cc: hpa@zytor.com
Cc: linux-mm@kvack.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: Will Deacon <will.deacon@arm.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: stable@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20180627141348.21777-3-toshi.kani@hpe.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Salyzyn [Tue, 31 Jul 2018 22:02:13 +0000 (15:02 -0700)]
Bluetooth: hidp: buffer overflow in hidp_process_report
commit
7992c18810e568b95c869b227137a2215702a805 upstream.
CVE-2018-9363
The buffer length is unsigned at all layers, but gets cast to int and
checked in hidp_process_report and can lead to a buffer overflow.
Switch len parameter to unsigned int to resolve issue.
This affects 3.18 and newer kernels.
Signed-off-by: Mark Salyzyn <salyzyn@android.com>
Fixes:
a4b1b5877b514b276f0f31efe02388a9c2836728 ("HID: Bluetooth: hidp: make sure input buffers are big enough")
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-bluetooth@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: security@kernel.org
Cc: kernel-team@android.com
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thierry Escande [Fri, 8 Sep 2017 05:13:08 +0000 (00:13 -0500)]
ASoC: Intel: cht_bsw_max98090_ti: Fix jack initialization
commit
3bbda5a38601f7675a214be2044e41d7749e6c7b upstream.
If the ts3a227e audio accessory detection hardware is present and its
driver probed, the jack needs to be created before enabling jack
detection in the ts3a227e driver. With this patch, the jack is
instantiated in the max98090 headset init function if the ts3a227e is
present. This fixes a null pointer dereference as the jack detection
enabling function in the ts3a driver was called before the jack is
created.
[minor correction to keep error handling on jack creation the same
as before by Pierre Bossart]
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jean-François Têtu [Fri, 22 Sep 2017 21:44:28 +0000 (17:44 -0400)]
ASoC: msm8916-wcd-digital: fix RX2 MIX1 and RX3 MIX1
commit
f53ee247ad546183fc13739adafc5579b9f0ebc0 upstream.
The kcontrol for the third input (rxN_mix1_inp3) of both RX2
and RX3 mixers are not using the correct control register. This simple
patch fixes this.
Signed-off-by: Jean-François Têtu <jean-francois.tetu@savoirfairelinux.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paolo Valente [Thu, 21 Sep 2017 09:04:00 +0000 (11:04 +0200)]
block, bfq: fix wrong init of saved start time for weight raising
commit
4baa8bb13f41307f3eb62fe91f93a1a798ebef53 upstream.
This commit fixes a bug that causes bfq to fail to guarantee a high
responsiveness on some drives, if there is heavy random read+write I/O
in the background. More precisely, such a failure allowed this bug to
be found [1], but the bug may well cause other yet unreported
anomalies.
BFQ raises the weight of the bfq_queues associated with soft real-time
applications, to privilege the I/O, and thus reduce latency, for these
applications. This mechanism is named soft-real-time weight raising in
BFQ. A soft real-time period may happen to be nested into an
interactive weight raising period, i.e., it may happen that, when a
bfq_queue switches to a soft real-time weight-raised state, the
bfq_queue is already being weight-raised because deemed interactive
too. In this case, BFQ saves in a special variable
wr_start_at_switch_to_srt, the time instant when the interactive
weight-raising period started for the bfq_queue, i.e., the time
instant when BFQ started to deem the bfq_queue interactive. This value
is then used to check whether the interactive weight-raising period
would still be in progress when the soft real-time weight-raising
period ends. If so, interactive weight raising is restored for the
bfq_queue. This restore is useful, in particular, because it prevents
bfq_queues from losing their interactive weight raising prematurely,
as a consequence of spurious, short-lived soft real-time
weight-raising periods caused by wrong detections as soft real-time.
If, instead, a bfq_queue switches to soft-real-time weight raising
while it *is not* already in an interactive weight-raising period,
then the variable wr_start_at_switch_to_srt has no meaning during the
following soft real-time weight-raising period. Unfortunately the
handling of this case is wrong in BFQ: not only the variable is not
flagged somehow as meaningless, but it is also set to the time when
the switch to soft real-time weight-raising occurs. This may cause an
interactive weight-raising period to be considered mistakenly as still
in progress, and thus a spurious interactive weight-raising period to
start for the bfq_queue, at the end of the soft-real-time
weight-raising period. In particular the spurious interactive
weight-raising period will be considered as still in progress, if the
soft-real-time weight-raising period does not last very long. The
bfq_queue will then be wrongly privileged and, if I/O bound, will
unjustly steal bandwidth to truly interactive or soft real-time
bfq_queues, harming responsiveness and low latency.
This commit fixes this issue by just setting wr_start_at_switch_to_srt
to minus infinity (farthest past time instant according to jiffies
macros): when the soft-real-time weight-raising period ends, certainly
no interactive weight-raising period will be considered as still in
progress.
[1] Background I/O Type: Random - Background I/O mix: Reads and writes
- Application to start: LibreOffice Writer in
http://www.phoronix.com/scan.php?page=news_item&px=Linux-4.13-IO-Laptop
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Angelo Ruocco <angeloruocco90@gmail.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Lee Tibbert <lee.tibbert@gmail.com>
Tested-by: Mirko Montanari <mirkomontanari91@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Syring [Thu, 14 Sep 2017 12:05:19 +0000 (14:05 +0200)]
clk: sunxi-ng: Fix missing CLK_SET_RATE_PARENT in ccu-sun4i-a10.c
commit
a894990ac994a53bc5a0cc694eb12f3c064c18c5 upstream.
When using cpufreq-dt with default govenor other than "performance"
system freezes while booting.
Adding CLK_SET_RATE_PARENT | CLK_IS_CRITICAL to clk_cpu fixes the
problem.
Tested on Cubietruck (A20).
Fixes:
c84f5683f6E ("clk: sunxi-ng: Add sun4i/sun7i CCU driver")
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Alexander Syring <alex@asyring.de>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kuninori Morimoto [Mon, 11 Sep 2017 04:17:26 +0000 (04:17 +0000)]
ASoC: rsnd: fix ADG flags
commit
b7165d26bf730567ab081bb9383aff82cd43d9ea upstream.
Current ADG driver is over-writing flags. This patch fixes it.
Reported-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marc-André Lureau [Mon, 20 Nov 2017 09:55:15 +0000 (10:55 +0100)]
fw_cfg: fix driver remove
commit
23f1b8d938c861ee0bbb786162f7ce0685f722ec upstream.
On driver remove(), all objects created during probe() should be
removed, but sysfs qemu_fw_cfg/rev file was left. Also reorder
functions to match probe() error cleanup code.
Cc: stable@vger.kernel.org
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thomas Gleixner [Wed, 22 Nov 2017 12:05:48 +0000 (13:05 +0100)]
sched/debug: Fix task state recording/printout
commit
3f5fe9fef5b2da06b6319fab8123056da5217c3f upstream.
The recent conversion of the task state recording to use task_state_index()
broke the sched_switch tracepoint task state output.
task_state_index() returns surprisingly an index (0-7) which is then
printed with __print_flags() applying bitmasks. Not really working and
resulting in weird states like 'prev_state=t' instead of 'prev_state=I'.
Use TASK_REPORT_MAX instead of TASK_STATE_MAX to report preemption. Build a
bitmask from the return value of task_state_index() and store it in
entry->prev_state, which makes __print_flags() work as expected.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: stable@vger.kernel.org
Fixes:
efb40f588b43 ("sched/tracing: Fix trace_sched_switch task-state printing")
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1711221304180.1751@nanos
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / log