git.stricted.de - GitHub/moto-9609/android_kernel_motorola

Merge branch 'efi-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull EFI fix from Ingo Molnar:
"A boot crash fix for certain systems where the kernel would trust a
piece of firmware data it should not have"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: Fix boot panic because of invalid BGRT image address

Merge tag 'iommu-fixes-v4.12-rc4' of git://git./linux/kernel/git/joro/iommu

Pull IOMMU fixes from Joerg Roedel:

- another compile-fix for my header cleanup

- a couple of fixes for the recently merged IOMMU probe deferal code

- fixes for ACPI/IORT code necessary with IOMMU probe deferal

* tag 'iommu-fixes-v4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  arm: dma-mapping: Reset the device's dma_ops
  ACPI/IORT: Move the check to get iommu_ops from translated fwspec
  ARM: dma-mapping: Don't tear down third-party mappings
  ACPI/IORT: Ignore all errors except EPROBE_DEFER
  iommu/of: Ignore all errors except EPROBE_DEFER
  iommu/of: Fix check for returning EPROBE_DEFER
  iommu/dma: Fix function declaration

Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

Pull input fixes from Dmitry Torokhov:

- mark "guest" RMI device as pass-through port to avoid "phantom" ALPS
   toouchpad on newer Lenovo Carbons

- add two more laptops to the Elantech's lists of devices using CRC
   mode

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: synaptics-rmi4 - register F03 port as pass-through serio
  Input: elantech - add Fujitsu Lifebook E546/E557 to force crc_enabled

Merge tag 'md/4.12-rc5' of git://git./linux/kernel/git/shli/md

Pull MD bugfix from Shaohua Li:
"One bug fix from Neil Brown for MD. The bug was introduced in this
cycle"

* tag 'md/4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
md: initialise ->writes_pending in personality modules.

Merge branch 'for-linus' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:
"A set of fixes in the area of block IO, that should go into the next
  -rc release. This contains:

   - An OOPS fix from Dmitry, fixing a regression with the bio integrity
     code in this series.

   - Fix truncation of elevator io context cache name, from Eric
     Biggers.

   - NVMe pull from Christoph includes FC fixes from James, APST
     fixes/tweaks from Kai-Heng, removal fix from Rakesh, and an RDMA
     fix from Sagi.

   - Two tweaks for the block throttling code. One from Joseph Qi,
     fixing an oops from the timer code, and one from Shaohua, improving
     the behavior on rotatonal storage.

   - Two blk-mq fixes from Ming, fixing corner cases with the direct
     issue code.

   - Locking fix for bfq cgroups from Paolo"

* 'for-linus' of git://git.kernel.dk/linux-block:
  block, bfq: access and cache blkg data only when safe
  Fix loop device flush before configure v3
  blk-throttle: set default latency baseline for harddisk
  blk-throttle: fix NULL pointer dereference in throtl_schedule_pending_timer
  nvme: relax APST default max latency to 100ms
  nvme: only consider exit latency when choosing useful non-op power states
  nvme-fc: fix missing put reference on controller create failure
  nvme-fc: on lldd/transport io error, terminate association
  nvme-rdma: fast fail incoming requests while we reconnect
  nvme-pci: fix multiple ctrl removal scheduling
  nvme: fix hang in remove path
  elevator: fix truncation of icq_cache_name
  blk-mq: fix direct issue
  blk-mq: pass correct hctx to blk_mq_try_issue_directly
  bio-integrity: Do not allocate integrity context for bio w/o data

Merge tag 'sound-4.12-rc5' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
"This update contains a slightly hight amount of changes due to the
  pending ASoC fixes:

   - ALSA timer core got a couple of fixes for races between read and
     ioctl, leading to potential read of uninitialized kmalloced memory

   - ASoC core fixed the de-registration pattern for use-after-free bug

   - The rewrite of probe code in ASoC Intel Skylake for i915 component

   - ASoC R-snd got a series of fixes for SSI

   - ASoC simple-card, atmel, da7213, and rt286 trivial fixes

   - HD-audio ALC269 quirk and rearrangement of quirk table"

* tag 'sound-4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: timer: Fix missing queue indices reset at SNDRV_TIMER_IOCTL_SELECT
  ALSA: timer: Fix race between read and ioctl
  ALSA: hda/realtek - Reorder ALC269 ASUS quirk entries
  ALSA: hda/realtek: Fix mic and headset jack sense on Asus X705UD
  ASoC: rsnd: fixup parent_clk_name of AUDIO_CLKOUTx
  ASoC: Intel: Skylake: Fix to parse consecutive string tkns in manifest
  ASoC: Intel: Skylake: Fix IPC rx_list corruption
  ASoC: rsnd: SSI PIO adjust to 24bit mode
  MAINTAINERS: Update email address for patches to Wolfson parts
  ASoC: Fix use-after-free at card unregistration
  ASoC: simple-card: fix mic jack initialization
  ASoC: rsnd: don't call free_irq() on Parent SSI
  ASoC: atmel-classd: sync regcache when resuming
  ASoC: rsnd: don't use PDTA bit for 24bit on SSI
  ASoC: da7213: Fix incorrect usage of bitwise '&' operator for SRM check
  rt286: add Thinkpad Helix 2 to force_combo_jack_table
  ASoC: Intel: Skylake: Move i915 registration to worker thread

Merge tag 'drm-fixes-for-v4.12-rc5' of git://people.freedesktop.org/~airlied/linux

Pull drm fixes from Dave Airlie:
"Intel, nouveau, rockchip, vmwgfx, imx, meson, mediatek and core fixes.

  Bit more spread out fixes this time, fixes for 7 drivers + a couple of
  core fixes.

  i915 and vmwgfx are the main ones. The vmwgfx ones fix a bunch of
  regressions in their atomic rework, and a few fixes destined for
  stable. i915 has some 4.12 regressions and older things that need to
  be fixed in stable as well.

  nouveau also has some runtime pm fixes and a timer list handling fix,
  otherwise a couple of core and small driver regression fixes"

* tag 'drm-fixes-for-v4.12-rc5' of git://people.freedesktop.org/~airlied/linux: (37 commits)
  drm/i915: fix warning for unused variable
  drm/meson: Fix driver bind when only CVBS is available
  drm/i915: Fix 90/270 rotated coordinates for FBC
  drm/i915: Restore has_fbc=1 for ILK-M
  drm/i915: Workaround VLV/CHV DSI scanline counter hardware fail
  drm/i915: Fix logical inversion for gen4 quirking
  drm/i915: Guard against i915_ggtt_disable_guc() being invoked unconditionally
  drm/i915: Always recompute watermarks when distrust_bios_wm is set, v2.
  drm/i915: Prevent the system suspend complete optimization
  drm/i915/psr: disable psr2 for resolution greater than 32X20
  drm/i915: Hold a wakeref for probing the ring registers
  drm/i915: Short-circuit i915_gem_wait_for_idle() if already idle
  drm/i915: Disable decoupled MMIO
  drm/i915/guc: Remove stale comment for q_fail
  drm/vmwgfx: Bump driver minor and date
  drm/vmwgfx: Remove unused legacy cursor functions
  drm/vmwgfx: fix spelling mistake "exeeds" -> "exceeds"
  drm/vmwgfx: Fix large topology crash
  drm/vmwgfx: Make sure to update STDU when FB is updated
  drm/vmwgfx: Make sure backup_handle is always valid
  ...

Merge tag 'for-linus-4.12b-rc5-tag' of git://git./linux/kernel/git/xen/tip

Pull xen fix from Juergen Gross:
"A fix for Xen on ARM when dealing with 64kB page size of a guest"

* tag 'for-linus-4.12b-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/privcmd: Support correctly 64KB page granularity when mapping memory

Input: synaptics-rmi4 - register F03 port as pass-through serio

The 5th generation Thinkpad X1 Carbons use Synaptics touchpads accessible
over SMBus/RMI, combined with ALPS or Elantech trackpoint devices instead
of classic IBM/Lenovo trackpoints. Unfortunately there is no way for ALPS
driver to detect whether it is dealing with touchpad + trackpoint
combination or just a trackpoint, so we end up with a "phantom" dualpoint
ALPS device in addition to real touchpad and trackpoint.

Given that we do not have any special advanced handling for ALPS or
Elantech trackpoints (unlike IBM trackpoints that have separate driver and
a host of options) we are better off keeping the trackpoints in PS/2
emulation mode. We achieve that by setting serio type to SERIO_PS_PSTHRU,
which will limit number of protocols psmouse driver will try. In addition
to getting rid of the "phantom" touchpads, this will also speed up probing
of F03 pass-through port.

Reported-by: Damjan Georgievski <gdamjan@gmail.com>
Suggested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Merge tag 'powerpc-4.12-5' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:
"Mostly fairly minor, of note are:

   - Fix percpu allocations to be NUMA aware

   - Limit 4k page size config to 64TB virtual address space

   - Avoid needlessly restoring FP and vector registers

  Thanks to Aneesh Kumar K.V, Breno Leitao, Christophe Leroy, Frederic
  Barrat, Madhavan Srinivasan, Michael Bringmann, Nicholas Piggin,
  Vaibhav Jain"

* tag 'powerpc-4.12-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/book3s64: Move PPC_DT_CPU_FTRs and enable it by default
  powerpc/mm/4k: Limit 4k page size config to 64TB virtual address space
  cxl: Fix error path on bad ioctl
  powerpc/perf: Fix Power9 test_adder fields
  powerpc/numa: Fix percpu allocations to be NUMA aware
  cxl: Avoid double free_irq() for psl,slice interrupts
  powerpc/kernel: Initialize load_tm on task creation
  powerpc/kernel: Fix FP and vector register restoration
  powerpc/64: Reclaim CPU_FTR_SUBCORE
  powerpc/hotplug-mem: Fix missing endian conversion of aa_index
  powerpc/sysdev/simple_gpio: Fix oops in gpio save_regs function
  powerpc/spufs: Fix coredump of SPU contexts
  powerpc/64s: Add dt_cpu_ftrs boot time setup option

Merge tag 'armsoc-fixes' of git://git./linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
"Been sitting on these for a couple of weeks waiting on some larger
  batches to come in but it's been pretty quiet.

  Just your garden variety fixes here:

   - A few maintainers updates (ep93xx, Exynos, TI, Marvell)
   - Some PM fixes for Atmel/at91 and Marvell
   - A few DT fixes for Marvell, Versatile, TI Keystone, bcm283x
   - A reset driver patch to set module license for symbol access"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  MAINTAINERS: EP93XX: Update maintainership
  MAINTAINERS: remove kernel@stlinux.com obsolete mailing list
  ARM: dts: versatile: use #include "..." to include local DT
  MAINTAINERS: add device-tree files to TI DaVinci entry
  ARM: at91: select CONFIG_ARM_CPU_SUSPEND
  ARM: dts: keystone-k2l: fix broken Ethernet due to disabled OSR
  arm64: defconfig: enable some core options for 64bit Rockchip socs
  arm64: marvell: dts: fix interrupts in 7k/8k crypto nodes
  reset: hi6220: Set module license so that it can be loaded
  MAINTAINERS: add irqchip related drivers to Marvell EBU maintainers
  MAINTAINERS: sort F entries for Marvell EBU maintainers
  ARM: davinci: PM: Do not free useful resources in normal path in 'davinci_pm_init'
  ARM: davinci: PM: Free resources in error handling path in 'davinci_pm_init'
  ARM: dts: bcm283x: Reserve first page for firmware
  memory: atmel-ebi: mark PM ops as __maybe_unused
  MAINTAINERS: Remove Javier Martinez Canillas as reviewer for Exynos

efi: Fix boot panic because of invalid BGRT image address

Maniaxx reported a kernel boot crash in the EFI code, which I emulated
by using same invalid phys addr in code:

  BUG: unable to handle kernel paging request at ffffffffff280001
  IP: efi_bgrt_init+0xfb/0x153
  ...
  Call Trace:
   ? bgrt_init+0xbc/0xbc
   acpi_parse_bgrt+0xe/0x12
   acpi_table_parse+0x89/0xb8
   acpi_boot_init+0x445/0x4e2
   ? acpi_parse_x2apic+0x79/0x79
   ? dmi_ignore_irq0_timer_override+0x33/0x33
   setup_arch+0xb63/0xc82
   ? early_idt_handler_array+0x120/0x120
   start_kernel+0xb7/0x443
   ? early_idt_handler_array+0x120/0x120
   x86_64_start_reservations+0x29/0x2b
   x86_64_start_kernel+0x154/0x177
   secondary_startup_64+0x9f/0x9f

There is also a similar bug filed in bugzilla.kernel.org:

  https://bugzilla.kernel.org/show_bug.cgi?id=195633

The crash is caused by this commit:

  7b0a911478c7 efi/x86: Move the EFI BGRT init code to early init code

The root cause is the firmware on those machines provides invalid BGRT
image addresses.

In a kernel before above commit BGRT initializes late and uses ioremap()
to map the image address. Ioremap validates the address, if it is not a
valid physical address ioremap() just fails and returns. However in current
kernel EFI BGRT initializes early and uses early_memremap() which does not
validate the image address, and kernel panic happens.

According to ACPI spec the BGRT image address should fall into
EFI_BOOT_SERVICES_DATA, see the section 5.2.22.4 of below document:

  http://www.uefi.org/sites/default/files/resources/ACPI_6_1.pdf

Fix this issue by validating the image address in efi_bgrt_init(). If the
image address does not fall into any EFI_BOOT_SERVICES_DATA areas we just
bail out with a warning message.

Reported-by: Maniaxx <tripleshiftone@gmail.com>
Signed-off-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes: 7b0a911478c7 ("efi/x86: Move the EFI BGRT init code to early init code")
Link: http://lkml.kernel.org/r/20170609084558.26766-2-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge branch 'vmwgfx-fixes-4.12' of git://people.freedesktop.org/~thomash/linux into drm-fixes

A bunch of fixes for vmwgfx 4.12 regressions and older stuff. In the latter
case either trivial, cc'd stable or requiring backports for stable.

* 'vmwgfx-fixes-4.12' of git://people.freedesktop.org/~thomash/linux:
  drm/vmwgfx: Bump driver minor and date
  drm/vmwgfx: Remove unused legacy cursor functions
  drm/vmwgfx: fix spelling mistake "exeeds" -> "exceeds"
  drm/vmwgfx: Fix large topology crash
  drm/vmwgfx: Make sure to update STDU when FB is updated
  drm/vmwgfx: Make sure backup_handle is always valid
  drm/vmwgfx: Handle vmalloc() failure in vmw_local_fifo_reserve()
  drm/vmwgfx: Don't create proxy surface for cursor
  drm/vmwgfx: limit the number of mip levels in vmw_gb_surface_define_ioctl()

Merge tag 'drm-intel-fixes-2017-06-08' of git://anongit.freedesktop.org/git/drm-intel into drm-fixes

drm/i915 fixes for v4.12-rc5

* tag 'drm-intel-fixes-2017-06-08' of git://anongit.freedesktop.org/git/drm-intel:
  drm/i915: fix warning for unused variable
  drm/i915: Fix 90/270 rotated coordinates for FBC
  drm/i915: Restore has_fbc=1 for ILK-M
  drm/i915: Workaround VLV/CHV DSI scanline counter hardware fail
  drm/i915: Fix logical inversion for gen4 quirking
  drm/i915: Guard against i915_ggtt_disable_guc() being invoked unconditionally
  drm/i915: Always recompute watermarks when distrust_bios_wm is set, v2.
  drm/i915: Prevent the system suspend complete optimization
  drm/i915/psr: disable psr2 for resolution greater than 32X20
  drm/i915: Hold a wakeref for probing the ring registers
  drm/i915: Short-circuit i915_gem_wait_for_idle() if already idle
  drm/i915: Disable decoupled MMIO
  drm/i915/guc: Remove stale comment for q_fail
  drm/i915: Serialize GTT/Aperture accesses on BXT

Merge tag 'drm-misc-fixes-2017-06-07' of git://anongit.freedesktop.org/git/drm-misc into drm-fixes

Driver Changes:
- kirin: Use correct dt port for the bridge (John)
- meson: Fix regression caused by adding HDMI support to allow board
configurations without HDMI (Neil)

Cc: John Stultz <john.stultz@linaro.org>
Cc: Neil Armstrong <narmstrong@baylibre.com>
* tag 'drm-misc-fixes-2017-06-07' of git://anongit.freedesktop.org/git/drm-misc:
drm/meson: Fix driver bind when only CVBS is available
drm: kirin: Fix drm_of_find_panel_or_bridge conversion

Merge branch 'mediatek-drm-fixes-4.12-rc1' of https://github.com/ckhu-mediatek/linux.git-tags into drm-fixes

mediatek fixes

* 'mediatek-drm-fixes-4.12-rc1' of https://github.com/ckhu-mediatek/linux.git-tags:
drm/mediatek: fix mtk_hdmi_setup_vendor_specific_infoframe mistake
drm/mediatek: fix a timeout loop

Merge tag 'imx-drm-fixes-2017-06-08' of git://git.pengutronix.de/git/pza/linux into drm-fixes

imx-drm: PRE clock gating, panelless LDB, and VDIC CSI selection fixes

- Keep the external clock input to the PRE ungated and only use the internal
  soft reset to keep the module in low power state, to avoid sporadic startup
  failures.
- Ignore -ENODEV return values from drm_of_find_panel_or_bridge in the LDB
  driver to fix probing for devices that still do not specify a panel in the
  device tree.
- Fix the CSI input selection to the VDIC. According to experiments, the real
  behaviour differs a bit from the documentation.

* tag 'imx-drm-fixes-2017-06-08' of git://git.pengutronix.de/git/pza/linux:
  gpu: ipu-v3: Fix CSI selection for VDIC
  drm/imx: imx-ldb: Accept drm_of_find_panel_or_bridge failure
  gpu: ipu-v3: pre: only use internal clock gating

Merge tag 'pm-4.12-rc5' of git://git./linux/kernel/git/rafael/linux-pm

Pull power management fixes from Rafael Wysocki:
"These revert one problematic commit related to system sleep and fix
  one recent intel_pstate regression.

  Specifics:

   - Revert a recent commit that attempted to avoid spurious wakeups
     from suspend-to-idle via ACPI SCI, but introduced regressions on
     some systems (Rafael Wysocki).

     We will get back to the problem it tried to address in the next
     cycle.

   - Fix a possible division by 0 during intel_pstate initialization
     due to a missing check (Rafael Wysocki)"

* tag 'pm-4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  Revert "ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle"
  cpufreq: intel_pstate: Avoid division by 0 in min_perf_pct_min()

Merge tag 'modules-for-v4.12-rc5' of git://git./linux/kernel/git/jeyu/linux

Pull module maintainer address change from Jessica Yu:
"A single patch that advertises my email address change"

* tag 'modules-for-v4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
MAINTAINERS: update email address for Jessica Yu

Merge branches 'intel_pstate' and 'pm-sleep'

* intel_pstate:
cpufreq: intel_pstate: Avoid division by 0 in min_perf_pct_min()

* pm-sleep:
Revert "ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle"

Merge branch 'for-linus' of git://git./linux/kernel/git/pmladek/printk

Pull printk fix from Petr Mladek:
"This reverts a fix added into 4.12-rc1. It caused the kernel log to be
  printed on another console when two consoles of the same type were
  defined, e.g. console=ttyS0 console=ttyS1.

  This configuration was never supported by kernel itself, but it
  started to make sense with systemd. In other words, the commit broke
  userspace"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
  Revert "printk: fix double printing with earlycon"

Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6

Pull crypto fixes from Herbert Xu:
"This fixes a couple of places in the crypto code that were doing
  interruptible sleeps dangerously. They have been converted to use
  non-interruptible sleeps.

  This also fixes a bug in asymmetric_keys where it would trigger a
  use-after-free if a request returned EBUSY due to a full device queue"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: gcm - wait for crypto op not signal safe
  crypto: drbg - wait for crypto op not signal safe
  crypto: asymmetric_keys - handle EBUSY due to backlog correctly

block, bfq: access and cache blkg data only when safe

In blk-cgroup, operations on blkg objects are protected with the
request_queue lock. This is no more the lock that protects
I/O-scheduler operations in blk-mq. In fact, the latter are now
protected with a finer-grained per-scheduler-instance lock. As a
consequence, although blkg lookups are also rcu-protected, blk-mq I/O
schedulers may see inconsistent data when they access blkg and
blkg-related objects. BFQ does access these objects, and does incur
this problem, in the following case.

The blkg_lookup performed in bfq_get_queue, being protected (only)
through rcu, may happen to return the address of a copy of the
original blkg. If this is the case, then the blkg_get performed in
bfq_get_queue, to pin down the blkg, is useless: it does not prevent
blk-cgroup code from destroying both the original blkg and all objects
directly or indirectly referred by the copy of the blkg. BFQ accesses
these objects, which typically causes a crash for NULL-pointer
dereference of memory-protection violation.

Some additional protection mechanism should be added to blk-cgroup to
address this issue. In the meantime, this commit provides a quick
temporary fix for BFQ: cache (when safe) blkg data that might
disappear right after a blkg_lookup.

In particular, this commit exploits the following facts to achieve its
goal without introducing further locks. Destroy operations on a blkg
invoke, as a first step, hooks of the scheduler associated with the
blkg. And these hooks are executed with bfqd->lock held for BFQ. As a
consequence, for any blkg associated with the request queue an
instance of BFQ is attached to, we are guaranteed that such a blkg is
not destroyed, and that all the pointers it contains are consistent,
while that instance is holding its bfqd->lock. A blkg_lookup performed
with bfqd->lock held then returns a fully consistent blkg, which
remains consistent until this lock is held. In more detail, this holds
even if the returned blkg is a copy of the original one.

Finally, also the object describing a group inside BFQ needs to be
protected from destruction on the blkg_free of the original blkg
(which invokes bfq_pd_free). This commit adds private refcounting for
this object, to let it disappear only after no bfq_queue refers to it
any longer.

This commit also removes or updates some stale comments on locking
issues related to blk-cgroup operations.

Reported-by: Tomas Konir <tomas.konir@gmail.com>
Reported-by: Lee Tibbert <lee.tibbert@gmail.com>
Reported-by: Marco Piazza <mpiazza@gmail.com>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Tested-by: Tomas Konir <tomas.konir@gmail.com>
Tested-by: Lee Tibbert <lee.tibbert@gmail.com>
Tested-by: Marco Piazza <mpiazza@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

Merge branch 'nvme-4.12' of git://git.infradead.org/nvme into for-linus

Christoph writes:

"A few NVMe fixes for 4.12-rc, PCIe reset fixes and APST fixes, a
RDMA reconnect fix, two FC fixes and a general controller removal fix."

drm/i915: fix warning for unused variable

drivers/gpu/drm/i915/intel_engine_cs.c: In function ‘intel_engine_is_idle’:
drivers/gpu/drm/i915/intel_engine_cs.c:1103:27: error: unused variable ‘dev_priv’ [-Werror=unused-variable]
struct drm_i915_private *dev_priv = engine->i915;
^~~~~~~~

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Fix loop device flush before configure v3

While installing SLES-12 (based on v4.4), I found that the installer
will stall for 60+ seconds during LVM disk scan.  The root cause was
determined to be the removal of a bound device check in loop_flush()
by commit b5dd2f6047ca ("block: loop: improve performance via blk-mq").

Restoring this check, examining ->lo_state as set by loop_set_fd()
eliminates the bad behavior.

Test method:
modprobe loop max_loop=64
dd if=/dev/zero of=disk bs=512 count=200K
for((i=0;i<4;i++))do losetup -f disk; done
mkfs.ext4 -F /dev/loop0
for((i=0;i<4;i++))do mkdir t$i; mount /dev/loop$i t$i;done
for f in `ls /dev/loop[0-9]*|sort`; do \
echo $f; dd if=$f of=/dev/null  bs=512 count=1; \
done

Test output:  stock          patched
/dev/loop0    18.1217e-05    8.3842e-05
/dev/loop1     6.1114e-05    0.000147979
/dev/loop10    0.414701      0.000116564
/dev/loop11    0.7474        6.7942e-05
/dev/loop12    0.747986      8.9082e-05
/dev/loop13    0.746532      7.4799e-05
/dev/loop14    0.480041      9.3926e-05
/dev/loop15    1.26453       7.2522e-05

Note that from loop10 onward, the device is not mounted, yet the
stock kernel consumes several orders of magnitude more wall time
than it does for a mounted device.
(Thanks for Mike Galbraith <efault@gmx.de>, give a changelog review.)

Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: James Wang <jnwang@suse.com>
Fixes: b5dd2f6047ca ("block: loop: improve performance via blk-mq")
Signed-off-by: Jens Axboe <axboe@fb.com>

powerpc/book3s64: Move PPC_DT_CPU_FTRs and enable it by default

The PPC_DT_CPU_FTRs is a bit misplaced in menuconfig, it shows up with
other general kernel options. It's really more at home in the "Platform
Support" section, so move it there.

Also enable it by default, for Book3s 64. It does mostly nothing unless
the device tree properties are found, and we will want it enabled
eventually in distro kernels, so turn it on to start getting more
testing.

Fixes: 5a61ef74f269 ("powerpc/64s: Support new device tree binding for discovering CPU features")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/mm/4k: Limit 4k page size config to 64TB virtual address space

Supporting 512TB requires us to do a order 3 allocation for level 1 page
table (pgd). This results in page allocation failures with certain workloads.
For now limit 4k linux page size config to 64TB.

Fixes: f6eedbba7a26 ("powerpc/mm/hash: Increase VA range to 128TB")
Reported-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

cxl: Fix error path on bad ioctl

Fix error path if we can't copy user structure on CXL_IOCTL_START_WORK
ioctl. We shouldn't unlock the context status mutex as it was not
locked (yet).

Fixes: 0712dc7e73e5 ("cxl: Fix issues when unmapping contexts")
Cc: stable@vger.kernel.org # v3.19+
Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Reviewed-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Revert "printk: fix double printing with earlycon"

This reverts commit cf39bf58afdaabc0b86f141630fb3fd18190294e.

The commit regression to users that define both console=ttyS1
and console=ttyS0 on the command line, see
https://lkml.kernel.org/r/20170509082915.GA13236@bistromath.localdomain

The kernel log messages always appeared only on one serial port. It is
even documented in Documentation/admin-guide/serial-console.rst:

"Note that you can only define one console per device type (serial,
video)."

The above mentioned commit changed the order in which the command line
parameters are searched. As a result, the kernel log messages go to
the last mentioned ttyS* instead of the first one.

We long thought that using two console=ttyS* on the command line
did not make sense. But then we realized that console= parameters
were handled also by systemd, see
http://0pointer.de/blog/projects/serial-console.html

"By default systemd will instantiate one serial-getty@.service on
the main kernel console, if it is not a virtual terminal."

where

"[4] If multiple kernel consoles are used simultaneously, the main
console is the one listed first in /sys/class/tty/console/active,
which is the last one listed on the kernel command line."

This puts the original report into another light. The system is running
in qemu. The first serial port is used to store the messages into a file.
The second one is used to login to the system via a socket. It depends
on systemd and the historic kernel behavior.

By other words, systemd causes that it makes sense to define both
console=ttyS1 console=ttyS0 on the command line. The kernel fix
caused regression related to userspace (systemd) and need to be
reverted.

In addition, it went out that the fix helped only partially.
The messages still were duplicated when the boot console was
removed early by late_initcall(printk_late_init). Then the entire
log was replayed when the same console was registered as a normal one.

Link: 20170606160339.GC7604@pathway.suse.cz
Cc: Aleksey Makarov <aleksey.makarov@linaro.org>
Cc: Sabrina Dubroca <sd@queasysnail.net>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Robin Murphy <robin.murphy@arm.com>,
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: "Nair, Jayachandran" <Jayachandran.Nair@cavium.com>
Cc: linux-serial@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>

MAINTAINERS: update email address for Jessica Yu

I will be traveling in the upcoming months and it'll be much easier for me
to access my kernel.org email rather than my work one. Change my email
address in the MAINTAINERS file from jeyu@redhat.com to jeyu@kernel.org.

Signed-off-by: Jessica Yu <jeyu@redhat.com>

Input: elantech - add Fujitsu Lifebook E546/E557 to force crc_enabled

The Lifebook E546 and E557 touchpad were also not functioning and
worked after running:

echo "1" > /sys/devices/platform/i8042/serio2/crc_enabled

Add them to the list of machines that need this workaround.

Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org>
Reviewed-by: Arjan Opmeer <arjan@opmeer.net>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

blk-throttle: set default latency baseline for harddisk

hard disk IO latency varies a lot depending on spindle move. The latency
range could be from several microseconds to several milliseconds. It's
pretty hard to get the baseline latency used by io.low.

We will use a different stragety here. The idea is only using IO with
spindle move to determine if cgroup IO is in good state. For HD, if io
latency is small (< 1ms), we ignore the IO. Such IO is likely from
sequential IO, and is helpless to help determine if a cgroup's IO is
impacted by other cgroups. With this, we only account IO with big
latency. Then we can choose a hardcoded baseline latency for HD (4ms,
which is typical IO latency with seek). With all these settings, the
io.low latency works for both HD and SSD.

Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

drm/meson: Fix driver bind when only CVBS is available

While introducing HDMI support, component matching on connectors node
were bypassed since no driver would actually bind on the DT node.
But when only a CVBS connector is present, only a single node is found
in the graph, but ignored and a NULL match table is given to the
component code.

This code permits bypassing the components framework by binding directly
the DRM driver when no components needs to be loaded.

Fixes: a41e82e6c457 ("drm/meson: Add support for components")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1496067352-8733-1-git-send-email-narmstrong@baylibre.com

blk-throttle: fix NULL pointer dereference in throtl_schedule_pending_timer

I have encountered a NULL pointer dereference in
throtl_schedule_pending_timer:
  [  413.735396] BUG: unable to handle kernel NULL pointer dereference at 0000000000000038
  [  413.735535] IP: [<ffffffff812ebbbf>] throtl_schedule_pending_timer+0x3f/0x210
  [  413.735643] PGD 22c8cf067 PUD 22cb34067 PMD 0
  [  413.735713] Oops: 0000 [#1] SMP
  ......

This is caused by the following case:
  blk_throtl_bio
    throtl_schedule_next_dispatch  <= sq is top level one without parent
      throtl_schedule_pending_timer
        sq_to_tg(sq)->td->throtl_slice  <= sq_to_tg(sq) returns NULL

Fix it by using sq_to_td instead of sq_to_tg(sq)->td, which will always
return a valid td.

Fixes: 297e3d854784 ("blk-throttle: make throtl_slice tunable")
Signed-off-by: Joseph Qi <qijiang.qj@alibaba-inc.com>
Reviewed-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

drm/i915: Fix 90/270 rotated coordinates for FBC

The clipped src coordinates have already been rotated by 270 degrees for
when the plane rotation is 90/270 degrees, hence the FBC code should no
longer swap the width and height.

Cc: stable@vger.kernel.org
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Fixes: b63a16f6cd89 ("drm/i915: Compute display surface offset in the plane check hook for SKL+")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170331180056.14086-4-ville.syrjala@linux.intel.com
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
(cherry picked from commit 73714c05df97d7527e7eaaa771472ef2ede46fa3)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Restore has_fbc=1 for ILK-M

Restore the lost has_fbc flag for mobile ILK.

Cc: Carlos Santa <carlos.santa@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Fixes: a13233804686 ("drm/i915: Introduce GEN5_FEATURES for device info")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170606133229.12439-1-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit c2d1a0ced2603c4a17fa9c53c37e415905cf5a6d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Workaround VLV/CHV DSI scanline counter hardware fail

The scanline counter is bonkers on VLV/CHV DSI. The scanline counter
increment is not lined up with the start of vblank like it is on
every other platform and output type. This causes problems for
both the vblank timestamping and atomic update vblank evasion.

On my FFRD8 machine at least, the scanline counter increment
happens about 1/3 of a scanline ahead of the start of vblank (which
is where all register latching happens still). That means we can't
trust the scanline counter to tell us whether we're in vblank or not
while we're on that particular line. In order to keep vblank
timestamping in working condition when called from the vblank irq,
we'll leave scanline_offset at one, which means that the entire
line containing the start of vblank is considered to be inside
the vblank.

For the vblank evasion we'll need to consider that entire line
to be bad, since we can't tell whether the registers already
got latched or not. And we can't actually use the start of vblank
interrupt to get us past that line as the interrupt would fire
too soon, and then we'd up waiting for the next start of vblank
instead. One way around that would using the frame start
interrupt instead since that wouldn't fire until the next
scanline, but that would require some bigger changes in the
interrupt code. So for simplicity we'll just poll until we get
past the bad line.

v2: Adjust the comments a bit

Cc: stable@vger.kernel.org
Cc: Jonas Aaberg <cja@gmx.net>
Tested-by: Jonas Aaberg <cja@gmx.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99086
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161215174734.28779-1-ville.syrjala@linux.intel.com
Tested-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
(cherry picked from commit ec1b4ee2834e66884e5b0d3d465f347ff212e372)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Fix logical inversion for gen4 quirking

The assertion that we want to make before disabling the pin of the pages
for the unknown swizzling quirk is that the quirk is indeed active, and
that the quirk is disabled before we do apply it to the pages.

Fixes: 2c3a3f44dc13 ("drm/i915: Fix pages pin counting around swizzle quirk")
Fixes: 957870f93412 ("drm/i915: Split out i915_gem_object_set_tiling()")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170521124014.27678-1-chris@chris-wilson.co.uk
Reviewed-bhy: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit 20bb377106af69d16269b1837e9a945b9f508a2e)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Guard against i915_ggtt_disable_guc() being invoked unconditionally

Commit 7c3f86b6dc51 ("drm/i915: Invalidate the guc ggtt TLB upon
insertion") added the restoration of the invalidation routine after the
GuC was disabled, but missed that the GuC was unconditionally disabled
when not used. This then overwrites the invalidate routine for the older
chipsets, causing havoc and breaking resume as the most obvious victim.

We place the guard inside i915_ggtt_disable_guc() to be backport
friendly (the bug was introduced into v4.11) but it would be preferred
to be in more control over when this was guard (i.e. do not try and
teardown the data structures before we have enabled them). That should
be true with the reorganisation of the guc loaders.

Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: 7c3f86b6dc51 ("drm/i915: Invalidate the guc ggtt TLB upon insertion")
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: <stable@vger.kernel.org> # v4.11+
Link: http://patchwork.freedesktop.org/patch/msgid/20170531190514.3691-1-chris@chris-wilson.co.uk
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
(cherry picked from commit cb60606d835ca8b2f744835116bcabe64ce88849)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Always recompute watermarks when distrust_bios_wm is set, v2.

On some systems there can be a race condition in which no crtc state is
added to the first atomic commit. This results in all crtc's having a
null DDB allocation, causing a FIFO underrun on any update until the
first modeset.

Changes since v1:
- Do not take the connection_mutex, this is already done below.

Reported-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Inspired-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: 98d39494d375 ("drm/i915/gen9: Compute DDB allocation at atomic
check time (v4)")
Cc: <stable@vger.kernel.org> # v4.8+
Cc: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170531154236.27180-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 367d73d2806085bb507ab44c1f532640917fd5ca)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Prevent the system suspend complete optimization

Since

commit bac2a909a096c9110525c18cbb8ce73c660d5f71
Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Date:   Wed Jan 21 02:17:42 2015 +0100

    PCI / PM: Avoid resuming PCI devices during system suspend

PCI devices will default to allowing the system suspend complete
optimization where devices are not woken up during system suspend if
they were already runtime suspended. This however breaks the i915/HDA
drivers for two reasons:

- The i915 driver has system suspend specific steps that it needs to
  run, that bring the device to a different state than its runtime
  suspended state.

- The HDA driver's suspend handler requires power that it will request
  from the i915 driver's power domain handler. This in turn requires the
  i915 driver to runtime resume itself, but this won't be possible if the
  suspend complete optimization is in effect: in this case the i915
  runtime PM is disabled and trying to get an RPM reference returns
  -EACCESS.

Solve this by requiring the PCI/PM core to resume the device during
system suspend which in effect disables the suspend complete optimization.

Regardless of the above commit the optimization stayed disabled for DRM
devices until

commit d14d2a8453d650bea32a1c5271af1458cd283a0f
Author: Lukas Wunner <lukas@wunner.de>
Date:   Wed Jun 8 12:49:29 2016 +0200

    drm: Remove dev_pm_ops from drm_class

so this patch is in practice a fix for this commit. Another reason for
the bug staying hidden for so long is that the optimization for a device
is disabled if it's disabled for any of its children devices. i915 may
have a backlight device as its child which doesn't support runtime PM
and so doesn't allow the optimization either.  So if this backlight
device got registered the bug stayed hidden.

Credits to Marta, Tomi and David who enabled pstore logging,
that caught one instance of this issue across a suspend/
resume-to-ram and Ville who rememberd that the optimization was enabled
for some devices at one point.

The first WARN triggered by the problem:

[ 6250.746445] WARNING: CPU: 2 PID: 17384 at drivers/gpu/drm/i915/intel_runtime_pm.c:2846 intel_runtime_pm_get+0x6b/0xd0 [i915]
[ 6250.746448] pm_runtime_get_sync() failed: -13
[ 6250.746451] Modules linked in: snd_hda_intel i915 vgem snd_hda_codec_hdmi x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul
snd_hda_codec_realtek snd_hda_codec_generic ghash_clmulni_intel e1000e snd_hda_codec snd_hwdep snd_hda_core ptp mei_me pps_core snd_pcm lpc_ich mei prime_
numbers i2c_hid i2c_designware_platform i2c_designware_core [last unloaded: i915]
[ 6250.746512] CPU: 2 PID: 17384 Comm: kworker/u8:0 Tainted: G     U  W       4.11.0-rc5-CI-CI_DRM_334+ #1
[ 6250.746515] Hardware name:                  /NUC5i5RYB, BIOS RYBDWi35.86A.0362.2017.0118.0940 01/18/2017
[ 6250.746521] Workqueue: events_unbound async_run_entry_fn
[ 6250.746525] Call Trace:
[ 6250.746530]  dump_stack+0x67/0x92
[ 6250.746536]  __warn+0xc6/0xe0
[ 6250.746542]  ? pci_restore_standard_config+0x40/0x40
[ 6250.746546]  warn_slowpath_fmt+0x46/0x50
[ 6250.746553]  ? __pm_runtime_resume+0x56/0x80
[ 6250.746584]  intel_runtime_pm_get+0x6b/0xd0 [i915]
[ 6250.746610]  intel_display_power_get+0x1b/0x40 [i915]
[ 6250.746646]  i915_audio_component_get_power+0x15/0x20 [i915]
[ 6250.746654]  snd_hdac_display_power+0xc8/0x110 [snd_hda_core]
[ 6250.746661]  azx_runtime_resume+0x218/0x280 [snd_hda_intel]
[ 6250.746667]  pci_pm_runtime_resume+0x76/0xa0
[ 6250.746672]  __rpm_callback+0xb4/0x1f0
[ 6250.746677]  ? pci_restore_standard_config+0x40/0x40
[ 6250.746682]  rpm_callback+0x1f/0x80
[ 6250.746686]  ? pci_restore_standard_config+0x40/0x40
[ 6250.746690]  rpm_resume+0x4ba/0x740
[ 6250.746698]  __pm_runtime_resume+0x49/0x80
[ 6250.746703]  pci_pm_suspend+0x57/0x140
[ 6250.746709]  dpm_run_callback+0x6f/0x330
[ 6250.746713]  ? pci_pm_freeze+0xe0/0xe0
[ 6250.746718]  __device_suspend+0xf9/0x370
[ 6250.746724]  ? dpm_watchdog_set+0x60/0x60
[ 6250.746730]  async_suspend+0x1a/0x90
[ 6250.746735]  async_run_entry_fn+0x34/0x160
[ 6250.746741]  process_one_work+0x1f2/0x6d0
[ 6250.746749]  worker_thread+0x49/0x4a0
[ 6250.746755]  kthread+0x107/0x140
[ 6250.746759]  ? process_one_work+0x6d0/0x6d0
[ 6250.746763]  ? kthread_create_on_node+0x40/0x40
[ 6250.746768]  ret_from_fork+0x2e/0x40
[ 6250.746778] ---[ end trace 102a62fd2160f5e6 ]---

v2:
- Use the new pci_dev->needs_resume flag, to avoid any overhead during
  the ->pm_prepare hook. (Rafael)

v3:
- Update commit message to reference the actual regressing commit.
  (Lukas)

v4:
- Rebase on v4 of patch 1/2.

Fixes: d14d2a8453d6 ("drm: Remove dev_pm_ops from drm_class")
References: https://bugs.freedesktop.org/show_bug.cgi?id=100378
References: https://bugs.freedesktop.org/show_bug.cgi?id=100770
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Marta Lofstedt <marta.lofstedt@intel.com>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Cc: Tomi Sarvela <tomi.p.sarvela@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: linux-pci@vger.kernel.org
Cc: <stable@vger.kernel.org> # v4.10.x: 4d071c3 - PCI/PM: Add needs_resume flag
Cc: <stable@vger.kernel.org> # v4.10.x
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reported-and-tested-by: Marta Lofstedt <marta.lofstedt@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1493726649-32094-2-git-send-email-imre.deak@intel.com
(cherry picked from commit adfdf85d795f4d4f487b61ee0b169d64c6e19081)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/psr: disable psr2 for resolution greater than 32X20

psr1 is also disabled for panel resolution greater than 32X20.
Added psr2 check to disable only for psr2 panels having resolution
greater than 32X20.

issue was introduced by
commit-id : "acf45d11050abd751dcec986ab121cb2367dcbba"
commit message: "PSR2 is restricted to work with panel resolutions
upto 3200x2000, move the check to intel_psr_match_conditions and fully
block psr."

v2: (Rodrigo)
Add previous commit details which introduced the issue

Fixes: acf45d11050a ("drm/i915/psr: disable psr2 for resolution greater than 32X20")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Cc: Yaroslav Shabalin <yaroslav.shabalin@gmail.com>
Reported-by: Yaroslav Shabalin <yaroslav.shabalin@gmail.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: vathsala nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/49935bdff896ee3140bed471012b9f9110a863a4.1495729964.git.vathsala.nagaraju@intel.com
(cherry picked from commit bef8c056fba09aa4629fe5a2d3efe64068d049db)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Hold a wakeref for probing the ring registers

Allow intel_engine_is_idle() to be called outside of the GT wakeref by
acquiring the device runtime pm for ourselves. This allows the function
to act as check after we assume the engine is idle and we release the GT
wakeref held whilst we have requests. At the moment, we do not call it
outside of an awake context but taking the wakeref as required makes it
more convenient to use for quick debugging in future.

[ 2613.401647] RPM wakelock ref not held during HW access
[ 2613.401684] ------------[ cut here ]------------
[ 2613.401720] WARNING: CPU: 5 PID: 7739 at drivers/gpu/drm/i915/intel_drv.h:1787 gen6_read32+0x21f/0x2b0 [i915]
[ 2613.401731] Modules linked in: snd_hda_intel i915 vgem snd_hda_codec_hdmi x86_pkg_temp_thermal intel_powerclamp snd_hda_codec_realtek coretemp snd_hda_codec_generic crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm r8169 mii mei_me lpc_ich mei prime_numbers [last unloaded: i915]
[ 2613.401823] CPU: 5 PID: 7739 Comm: drv_missed_irq Tainted: G     U          4.12.0-rc2-CI-CI_DRM_421+ #1
[ 2613.401825] Hardware name: MSI MS-7924/Z97M-G43(MS-7924), BIOS V1.12 02/15/2016
[ 2613.401840] task: ffff880409e3a740 task.stack: ffffc900084dc000
[ 2613.401861] RIP: 0010:gen6_read32+0x21f/0x2b0 [i915]
[ 2613.401863] RSP: 0018:ffffc900084dfce8 EFLAGS: 00010292
[ 2613.401869] RAX: 000000000000002a RBX: ffff8804016a8000 RCX: 0000000000000006
[ 2613.401871] RDX: 0000000000000006 RSI: ffffffff81cbf2d9 RDI: ffffffff81c9e3a7
[ 2613.401874] RBP: ffffc900084dfd18 R08: ffff880409e3afc8 R09: 0000000000000000
[ 2613.401877] R10: 000000008a1c483f R11: 0000000000000000 R12: 000000000000209c
[ 2613.401879] R13: 0000000000000001 R14: ffff8804016a8000 R15: ffff8804016ac150
[ 2613.401882] FS:  00007f39ef3dd8c0(0000) GS:ffff88041fb40000(0000) knlGS:0000000000000000
[ 2613.401885] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2613.401887] CR2: 00000000023717c8 CR3: 00000002e7b34000 CR4: 00000000001406e0
[ 2613.401889] Call Trace:
[ 2613.401912]  intel_engine_is_idle+0x76/0x90 [i915]
[ 2613.401931]  i915_gem_wait_for_idle+0xe6/0x1e0 [i915]
[ 2613.401951]  fault_irq_set+0x40/0x90 [i915]
[ 2613.401970]  i915_ring_test_irq_set+0x42/0x50 [i915]
[ 2613.401976]  simple_attr_write+0xc7/0xe0
[ 2613.401981]  full_proxy_write+0x4f/0x70
[ 2613.401987]  __vfs_write+0x23/0x120
[ 2613.401992]  ? rcu_read_lock_sched_held+0x75/0x80
[ 2613.401996]  ? rcu_sync_lockdep_assert+0x2a/0x50
[ 2613.401999]  ? __sb_start_write+0xfa/0x1f0
[ 2613.402004]  vfs_write+0xc5/0x1d0
[ 2613.402008]  ? trace_hardirqs_on_caller+0xe7/0x1c0
[ 2613.402013]  SyS_write+0x44/0xb0
[ 2613.402020]  entry_SYSCALL_64_fastpath+0x1c/0xb1
[ 2613.402022] RIP: 0033:0x7f39eded6670
[ 2613.402025] RSP: 002b:00007fffdcdcb1a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 2613.402030] RAX: ffffffffffffffda RBX: ffffffff81470203 RCX: 00007f39eded6670
[ 2613.402033] RDX: 0000000000000001 RSI: 000000000041bc33 RDI: 0000000000000006
[ 2613.402036] RBP: ffffc900084dff88 R08: 00007f39ef3dd8c0 R09: 0000000000000001
[ 2613.402038] R10: 0000000000000000 R11: 0000000000000246 R12: 000000000041bc33
[ 2613.402041] R13: 0000000000000006 R14: 0000000000000000 R15: 0000000000000000
[ 2613.402046]  ? __this_cpu_preempt_check+0x13/0x20
[ 2613.402052] Code: 01 9b fa e0 0f ff e9 28 fe ff ff 80 3d 6a dd 0e 00 00 0f 85 29 fe ff ff 48 c7 c7 48 19 29 a0 c6 05 56 dd 0e 00 01 e8 da 9a fa e0 <0f> ff e9 0f fe ff ff b9 01 00 00 00 ba 01 00 00 00 44 89 e6 48
[ 2613.402199] ---[ end trace 31f0cfa93ab632bf ]---

Fixes: 5400367a864d ("drm/i915: Ensure the engine is idle before manually changing HWS")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170530121334.17364-2-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
(cherry picked from commit a091d4ee931b16ce4fef945d39a20b851a7e17b7)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Short-circuit i915_gem_wait_for_idle() if already idle

If the device is asleep (no GT wakeref), we know the GPU is already idle.
If we add an early return, we can avoid touching registers and checking
hw state outside of the assumed GT wakelock. This prevents causing such
errors whilst debugging:

[ 2613.401647] RPM wakelock ref not held during HW access
[ 2613.401684] ------------[ cut here ]------------
[ 2613.401720] WARNING: CPU: 5 PID: 7739 at drivers/gpu/drm/i915/intel_drv.h:1787 gen6_read32+0x21f/0x2b0 [i915]
[ 2613.401731] Modules linked in: snd_hda_intel i915 vgem snd_hda_codec_hdmi x86_pkg_temp_thermal intel_powerclamp snd_hda_codec_realtek coretemp snd_hda_codec_generic crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm r8169 mii mei_me lpc_ich mei prime_numbers [last unloaded: i915]
[ 2613.401823] CPU: 5 PID: 7739 Comm: drv_missed_irq Tainted: G     U          4.12.0-rc2-CI-CI_DRM_421+ #1
[ 2613.401825] Hardware name: MSI MS-7924/Z97M-G43(MS-7924), BIOS V1.12 02/15/2016
[ 2613.401840] task: ffff880409e3a740 task.stack: ffffc900084dc000
[ 2613.401861] RIP: 0010:gen6_read32+0x21f/0x2b0 [i915]
[ 2613.401863] RSP: 0018:ffffc900084dfce8 EFLAGS: 00010292
[ 2613.401869] RAX: 000000000000002a RBX: ffff8804016a8000 RCX: 0000000000000006
[ 2613.401871] RDX: 0000000000000006 RSI: ffffffff81cbf2d9 RDI: ffffffff81c9e3a7
[ 2613.401874] RBP: ffffc900084dfd18 R08: ffff880409e3afc8 R09: 0000000000000000
[ 2613.401877] R10: 000000008a1c483f R11: 0000000000000000 R12: 000000000000209c
[ 2613.401879] R13: 0000000000000001 R14: ffff8804016a8000 R15: ffff8804016ac150
[ 2613.401882] FS:  00007f39ef3dd8c0(0000) GS:ffff88041fb40000(0000) knlGS:0000000000000000
[ 2613.401885] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2613.401887] CR2: 00000000023717c8 CR3: 00000002e7b34000 CR4: 00000000001406e0
[ 2613.401889] Call Trace:
[ 2613.401912]  intel_engine_is_idle+0x76/0x90 [i915]
[ 2613.401931]  i915_gem_wait_for_idle+0xe6/0x1e0 [i915]
[ 2613.401951]  fault_irq_set+0x40/0x90 [i915]
[ 2613.401970]  i915_ring_test_irq_set+0x42/0x50 [i915]
[ 2613.401976]  simple_attr_write+0xc7/0xe0
[ 2613.401981]  full_proxy_write+0x4f/0x70
[ 2613.401987]  __vfs_write+0x23/0x120
[ 2613.401992]  ? rcu_read_lock_sched_held+0x75/0x80
[ 2613.401996]  ? rcu_sync_lockdep_assert+0x2a/0x50
[ 2613.401999]  ? __sb_start_write+0xfa/0x1f0
[ 2613.402004]  vfs_write+0xc5/0x1d0
[ 2613.402008]  ? trace_hardirqs_on_caller+0xe7/0x1c0
[ 2613.402013]  SyS_write+0x44/0xb0
[ 2613.402020]  entry_SYSCALL_64_fastpath+0x1c/0xb1
[ 2613.402022] RIP: 0033:0x7f39eded6670
[ 2613.402025] RSP: 002b:00007fffdcdcb1a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 2613.402030] RAX: ffffffffffffffda RBX: ffffffff81470203 RCX: 00007f39eded6670
[ 2613.402033] RDX: 0000000000000001 RSI: 000000000041bc33 RDI: 0000000000000006
[ 2613.402036] RBP: ffffc900084dff88 R08: 00007f39ef3dd8c0 R09: 0000000000000001
[ 2613.402038] R10: 0000000000000000 R11: 0000000000000246 R12: 000000000041bc33
[ 2613.402041] R13: 0000000000000006 R14: 0000000000000000 R15: 0000000000000000
[ 2613.402046]  ? __this_cpu_preempt_check+0x13/0x20
[ 2613.402052] Code: 01 9b fa e0 0f ff e9 28 fe ff ff 80 3d 6a dd 0e 00 00 0f 85 29 fe ff ff 48 c7 c7 48 19 29 a0 c6 05 56 dd 0e 00 01 e8 da 9a fa e0 <0f> ff e9 0f fe ff ff b9 01 00 00 00 ba 01 00 00 00 44 89 e6 48
[ 2613.402199] ---[ end trace 31f0cfa93ab632bf ]---

Fixes: 25112b64b3d2 ("drm/i915: Wait for all engines to be idle as part of i915_gem_wait_for_idle()")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170530121334.17364-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit 863e9fde1a7061dad09bb299c65bed5f1ccb44ff)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Disable decoupled MMIO

The decoupled MMIO feature doesn't work as intended by HW team. Enabling
it with forcewake will only make debugging efforts more difficult, so
let's disable it.

Fixes: 85ee17ebeedd ("drm/i915/bxt: Broxton decoupled MMIO")
Cc: Zhe Wang <zhe1.wang@intel.com>
Cc: Praveen Paneri <praveen.paneri@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.10+
Signed-off-by: Kai Chen <kai.chen@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170523215812.18328-2-kai.chen@intel.com
(cherry picked from commit 0051c10acabb631cfd439eae73289e6e4c39b2b7)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/guc: Remove stale comment for q_fail

This member was dropped long time ago.

Fixes: 774439e1 ("drm/i915/guc: re-optimise i915_guc_client layout")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170518113104.54400-1-michal.wajdeczko@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 4afc67be8e203ee8f5e95e829c0777eae7a14702)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/vmwgfx: Bump driver minor and date

While the atomic modesetting capability is signaled also elsewhere, also
reflect it by a driver minor bump.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

drm/vmwgfx: Remove unused legacy cursor functions

These function implementations and/or declarations are no longer used
now that atomic is enabled.

Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reported-by: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>

drm/vmwgfx: fix spelling mistake "exeeds" -> "exceeds"

Trivial fix to spelling mistake in DRM_ERROR error message.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>

drm/vmwgfx: Fix large topology crash

The previous attempt at this had an issue with with num_clips > 1
because it would always end up using the coordinates of the last
clip while using width and height calculated from the bounding
box of all the clips.

So if the last clip happens to be not at the top-left corner of
the bounding box, the CPU blit operation would go out of bounds.

The original intent was to coalesce all the clips into one blit,
and to do that we need to also track the starting point of the
content buffer.

Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>

drm/vmwgfx: Make sure to update STDU when FB is updated

When a new FB is bound, we have to send an update command otherwise
the new FB may not be shown

Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>

drm/vmwgfx: Make sure backup_handle is always valid

When vmw_gb_surface_define_ioctl() is called with an existing buffer,
we end up returning an uninitialized variable in the backup_handle.

The fix is to first initialize backup_handle to 0 just to be sure, and
second, when a user-provided buffer is found, we will use the
req->buffer_handle as the backup_handle.

Cc: <stable@vger.kernel.org>
Reported-by: Murray McAllister <murray.mcallister@insomniasec.com>
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>

drm/vmwgfx: Handle vmalloc() failure in vmw_local_fifo_reserve()

If vmalloc() fails then we need to a bit of cleanup before returning.

Cc: <stable@vger.kernel.org>
Fixes: fb1d9738ca05 ("drm/vmwgfx: Add DRM driver for VMware Virtual GPU")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>

drm/vmwgfx: Don't create proxy surface for cursor

With atomic, the cursor surface is treated like a FB. Creating
a proxy surface for cursor doesn't gain us much benefit.

This fixes the issue on atomic enabled 2D VMs where the cursor
disappears.

Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>

drm/vmwgfx: limit the number of mip levels in vmw_gb_surface_define_ioctl()

The 'req->mip_levels' parameter in vmw_gb_surface_define_ioctl() is
a user-controlled 'uint32_t' value which is used as a loop count limit.
This can lead to a kernel lockup and DoS. Add check for 'req->mip_levels'.

References:
https://bugzilla.redhat.com/show_bug.cgi?id=1437431

Cc: <stable@vger.kernel.org>
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>

drm/i915: Serialize GTT/Aperture accesses on BXT

BXT has a H/W issue with IOMMU which can lead to system hangs when
Aperture accesses are queued within the GAM behind GTT Accesses.

This patch avoids the condition by wrapping all GTT updates in stop_machine
and using a flushing read prior to restarting the machine.

The stop_machine guarantees no new Aperture accesses can begin while
the PTE writes are being emmitted. The flushing read ensures that
any following Aperture accesses cannot begin until the PTE writes
have been cleared out of the GAM's fifo.

Only FOLLOWING Aperture accesses need to be separated from in flight
PTE updates. PTE Writes may follow tightly behind already in flight
Aperture accesses, so no flushing read is required at the start of
a PTE update sequence.

This issue was reproduced by running
igt/gem_readwrite and
igt/gem_render_copy
simultaneously from different processes, each in a tight loop,
with INTEL_IOMMU enabled.

This patch was originally published as:
drm/i915: Serialize GTT Updates on BXT

[Note: This will cause a performance penalty for some use cases, but
avoiding hangs trumps performance hits. This may need to be worked
around in Mesa to recover the lost performance.]

v2: Move bxt/iommu detection into static function
    Remove #ifdef CONFIG_INTEL_IOMMU protection
    Make function names more reflective of purpose
    Move flushing read into static function

v3: Tidy up for checkpatch.pl

Testcase: igt/gem_concurrent_blit
Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: John Harrison <john.C.Harrison@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: stable@vger.kernel.org
Link: http://patchwork.freedesktop.org/patch/msgid/1495641251-30022-1-git-send-email-jon.bloomfield@intel.com
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 0ef34ad6222abfa513117515fec720c33a58f105)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

xen/privcmd: Support correctly 64KB page granularity when mapping memory

Commit 5995a68 "xen/privcmd: Add support for Linux 64KB page granularity" did
not go far enough to support 64KB in mmap_batch_fn.

The variable 'nr' is the number of 4KB chunk to map. However, when Linux
is using 64KB page granularity the array of pages (vma->vm_private_data)
contain one page per 64KB. Fix it by incrementing st->index correctly.

Furthermore, st->va is not correctly incremented as PAGE_SIZE !=
XEN_PAGE_SIZE.

Fixes: 5995a68 ("xen/privcmd: Add support for Linux 64KB page granularity")
CC: stable@vger.kernel.org
Reported-by: Feng Kan <fkan@apm.com>
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

nvme: relax APST default max latency to 100ms

Christoph Hellwig suggests we should to make APST work out of the box.
Hence relax the the default max latency to make them able to enter
deepest power state on default.

Here are id-ctrl excerpts from two high latency NVMes:

vid     : 0x14a4
ssvid   : 0x1b4b
mn      : CX2-GB1024-Q11 NVMe LITEON 1024GB
ps    3 : mp:0.1000W non-operational enlat:5000 exlat:5000 rrt:3 rrl:3
          rwt:3 rwl:3 idle_power:- active_power:-
ps    4 : mp:0.0100W non-operational enlat:50000 exlat:100000 rrt:4 rrl:4
          rwt:4 rwl:4 idle_power:- active_power:-

vid     : 0x15b7
ssvid   : 0x1b4b
mn      : A400 NVMe SanDisk 512GB
ps    3 : mp:0.0500W non-operational enlat:51000 exlat:10000 rrt:0 rrl:0
          rwt:0 rwl:0 idle_power:- active_power:-
ps    4 : mp:0.0055W non-operational enlat:1000000 exlat:100000 rrt:0 rrl:0
          rwt:0 rwl:0 idle_power:- active_power:-

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme: only consider exit latency when choosing useful non-op power states

When a NVMe is in non-op states, the latency is exlat.
The latency will be enlat + exlat only when the NVMe tries to transit
from operational state right atfer it begins to transit to
non-operational state, which should be a rare case.

Therefore, as Andy Lutomirski suggests, use exlat only when deciding power
states to trainsit to.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme-fc: fix missing put reference on controller create failure

The failure case, of a create controller request, called
nvme_uninit_ctrl() but didn't do a put to allow the nvme
controller to be deleted.

Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme-fc: on lldd/transport io error, terminate association

Per FC-NVME, when lldd or transport detects an i/o error, the
connection must be terminated, which in turn requires the association
to be termianted. Currently the transport simply creates a nvme
completion status of transport error and returns the io. The FC-NVME
spec makes the mandate as initiator and host, depending on the error,
can get out of sync on outstanding io counts (sqhd/sqtail).

Implement the association teardown on lldd or transport detected
errors.

Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>

nvme-rdma: fast fail incoming requests while we reconnect

When we encounter an transport/controller errors, error recovery
kicks in which performs:
1. stops io/admin queues
2. moves transport queues out of LIVE state
3. fast fail pending io
4. schedule periodic reconnects.

But we also need to fast fail incoming IO taht enters after we
already scheduled. Given that our queue is not LIVE anymore, simply
restart the request queues to fail in .queue_rq

Reported-by: Alex Turin <alex@vastdata.com>
Reported-by: shahar.salzman <shahar.salzman@gmail.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org

nvme-pci: fix multiple ctrl removal scheduling

Commit c5f6ce97c1210 tries to address multiple resets but fails as
work_busy doesn't involve any synchronization and can fail.  This is
reproducible easily as can be seen by WARNING below which is triggered
with line:

WARN_ON(dev->ctrl.state == NVME_CTRL_RESETTING)

Allowing multiple resets can result in multiple controller removal as
well if different conditions inside nvme_reset_work fail and which
might deadlock on device_release_driver.

[  480.327007] WARNING: CPU: 3 PID: 150 at drivers/nvme/host/pci.c:1900 nvme_reset_work+0x36c/0xec0
[  480.327008] Modules linked in: rfcomm fuse nf_conntrack_netbios_ns nf_conntrack_broadcast...
[  480.327044]  btusb videobuf2_core ghash_clmulni_intel snd_hwdep cfg80211 acer_wmi hci_uart..
[  480.327065] CPU: 3 PID: 150 Comm: kworker/u16:2 Not tainted 4.12.0-rc1+ #13
[  480.327065] Hardware name: Acer Predator G9-591/Mustang_SLS, BIOS V1.10 03/03/2016
[  480.327066] Workqueue: nvme nvme_reset_work
[  480.327067] task: ffff880498ad8000 task.stack: ffffc90002218000
[  480.327068] RIP: 0010:nvme_reset_work+0x36c/0xec0
[  480.327069] RSP: 0018:ffffc9000221bdb8 EFLAGS: 00010246
[  480.327070] RAX: 0000000000460000 RBX: ffff880498a98128 RCX: dead000000000200
[  480.327070] RDX: 0000000000000001 RSI: ffff8804b1028020 RDI: ffff880498a98128
[  480.327071] RBP: ffffc9000221be50 R08: 0000000000000000 R09: 0000000000000000
[  480.327071] R10: ffffc90001963ce8 R11: 000000000000020d R12: ffff880498a98000
[  480.327072] R13: ffff880498a53500 R14: ffff880498a98130 R15: ffff880498a98128
[  480.327072] FS:  0000000000000000(0000) GS:ffff8804c1cc0000(0000) knlGS:0000000000000000
[  480.327073] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  480.327074] CR2: 00007ffcf3c37f78 CR3: 0000000001e09000 CR4: 00000000003406e0
[  480.327074] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  480.327075] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  480.327075] Call Trace:
[  480.327079]  ? __switch_to+0x227/0x400
[  480.327081]  process_one_work+0x18c/0x3a0
[  480.327082]  worker_thread+0x4e/0x3b0
[  480.327084]  kthread+0x109/0x140
[  480.327085]  ? process_one_work+0x3a0/0x3a0
[  480.327087]  ? kthread_park+0x60/0x60
[  480.327102]  ret_from_fork+0x2c/0x40
[  480.327103] Code: e8 5a dc ff ff 85 c0 41 89 c1 0f.....

This patch addresses the problem by using state of controller to
decide whether reset should be queued or not as state change is
synchronizated using controller spinlock.  Also cancel_work_sync is
used to make sure remove cancels the reset_work and waits for it to
finish.  This patch also changes return value from -ENODEV to more
appropriate -EBUSY if nvme_reset fails to change state.

Fixes: c5f6ce97c1210 ("nvme: don't schedule multiple resets")
Signed-off-by: Rakesh Pandit <rakesh@tuxera.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme: fix hang in remove path

We need to start admin queues too in nvme_kill_queues()
for avoiding hang in remove path[1].

This patch is very similar with 806f026f9b901eaf(nvme: use
blk_mq_start_hw_queues() in nvme_kill_queues()).

[1] hang stack trace
[<ffffffff813c9716>] blk_execute_rq+0x56/0x80
[<ffffffff815cb6e9>] __nvme_submit_sync_cmd+0x89/0xf0
[<ffffffff815ce7be>] nvme_set_features+0x5e/0x90
[<ffffffff815ce9f6>] nvme_configure_apst+0x166/0x200
[<ffffffff815cef45>] nvme_set_latency_tolerance+0x35/0x50
[<ffffffff8157bd11>] apply_constraint+0xb1/0xc0
[<ffffffff8157cbb4>] dev_pm_qos_constraints_destroy+0xf4/0x1f0
[<ffffffff8157b44a>] dpm_sysfs_remove+0x2a/0x60
[<ffffffff8156d951>] device_del+0x101/0x320
[<ffffffff8156db8a>] device_unregister+0x1a/0x60
[<ffffffff8156dc4c>] device_destroy+0x3c/0x50
[<ffffffff815cd295>] nvme_uninit_ctrl+0x45/0xa0
[<ffffffff815d4858>] nvme_remove+0x78/0x110
[<ffffffff81452b69>] pci_device_remove+0x39/0xb0
[<ffffffff81572935>] device_release_driver_internal+0x155/0x210
[<ffffffff81572a02>] device_release_driver+0x12/0x20
[<ffffffff815d36fb>] nvme_remove_dead_ctrl_work+0x6b/0x70
[<ffffffff810bf3bc>] process_one_work+0x18c/0x3a0
[<ffffffff810bf61e>] worker_thread+0x4e/0x3b0
[<ffffffff810c5ac9>] kthread+0x109/0x140
[<ffffffff8185800c>] ret_from_fork+0x2c/0x40
[<ffffffffffffffff>] 0xffffffffffffffff

Fixes: c5552fde102fc("nvme: Enable autonomous power state transitions")
Reported-by: Rakesh Pandit <rakesh@tuxera.com>
Tested-by: Rakesh Pandit <rakesh@tuxera.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

ALSA: timer: Fix missing queue indices reset at SNDRV_TIMER_IOCTL_SELECT

snd_timer_user_tselect() reallocates the queue buffer dynamically, but
it forgot to reset its indices.  Since the read may happen
concurrently with ioctl and snd_timer_user_tselect() allocates the
buffer via kmalloc(), this may lead to the leak of uninitialized
kernel-space data, as spotted via KMSAN:

  BUG: KMSAN: use of unitialized memory in snd_timer_user_read+0x6c4/0xa10
  CPU: 0 PID: 1037 Comm: probe Not tainted 4.11.0-rc5+ #2739
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
  Call Trace:
   __dump_stack lib/dump_stack.c:16
   dump_stack+0x143/0x1b0 lib/dump_stack.c:52
   kmsan_report+0x12a/0x180 mm/kmsan/kmsan.c:1007
   kmsan_check_memory+0xc2/0x140 mm/kmsan/kmsan.c:1086
   copy_to_user ./arch/x86/include/asm/uaccess.h:725
   snd_timer_user_read+0x6c4/0xa10 sound/core/timer.c:2004
   do_loop_readv_writev fs/read_write.c:716
   __do_readv_writev+0x94c/0x1380 fs/read_write.c:864
   do_readv_writev fs/read_write.c:894
   vfs_readv fs/read_write.c:908
   do_readv+0x52a/0x5d0 fs/read_write.c:934
   SYSC_readv+0xb6/0xd0 fs/read_write.c:1021
   SyS_readv+0x87/0xb0 fs/read_write.c:1018

This patch adds the missing reset of queue indices.  Together with the
previous fix for the ioctl/read race, we cover the whole problem.

Reported-by: Alexander Potapenko <glider@google.com>
Tested-by: Alexander Potapenko <glider@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: timer: Fix race between read and ioctl

The read from ALSA timer device, the function snd_timer_user_tread(),
may access to an uninitialized struct snd_timer_user fields when the
read is concurrently performed while the ioctl like
snd_timer_user_tselect() is invoked. We have already fixed the races
among ioctls via a mutex, but we seem to have forgotten the race
between read vs ioctl.

This patch simply applies (more exactly extends the already applied
range of) tu->ioctl_lock in snd_timer_user_tread() for closing the
race window.

Reported-by: Alexander Potapenko <glider@google.com>
Tested-by: Alexander Potapenko <glider@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

MAINTAINERS: EP93XX: Update maintainership

As agreed with Ryan, change the maintainership.

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: Ryan Mallon <rmallon@gmail.com>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Revert "ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle"

Revert commit eed4d47efe95 (ACPI / sleep: Ignore spurious SCI wakeups
from suspend-to-idle) as it turned out to be premature and triggered
a number of different issues on various systems.

That includes, but is not limited to, premature suspend-to-RAM aborts
on Dell XPS 13 (9343) reported by Dominik.

The issue the commit in question attempted to address is real and
will need to be taken care of going forward, but evidently more work
is needed for this purpose.

Reported-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

1) Made TCP congestion control documentation match current reality,
    from Anmol Sarma.

2) Various build warning and failure fixes from Arnd Bergmann.

3) Fix SKB list leak in ipv6_gso_segment().

4) Use after free in ravb driver, from Eugeniu Rosca.

5) Don't use udp_poll() in ping protocol driver, from Eric Dumazet.

6) Don't crash in PCI error recovery of cxgb4 driver, from Guilherme
    Piccoli.

7) _SRC_NAT_DONE_BIT needs to be cleared using atomics, from Liping
    Zhang.

8) Use after free in vxlan deletion, from Mark Bloch.

9) Fix ordering of NAPI poll enabled in ethoc driver, from Max
    Filippov.

10) Fix stmmac hangs with TSO, from Niklas Cassel.

11) Fix crash in CALIPSO ipv6, from Richard Haines.

12) Clear nh_flags properly on mpls link up. From Roopa Prabhu.

13) Fix regression in sk_err socket error queue handling, noticed by
    ping applications. From Soheil Hassas Yeganeh.

14) Update mlx4/mlx5 MAINTAINERS information.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (78 commits)
  net: stmmac: fix a broken u32 less than zero check
  net: stmmac: fix completely hung TX when using TSO
  net: ethoc: enable NAPI before poll may be scheduled
  net: bridge: fix a null pointer dereference in br_afspec
  ravb: Fix use-after-free on `ifconfig eth0 down`
  net/ipv6: Fix CALIPSO causing GPF with datagram support
  net: stmmac: ensure jumbo_frm error return is correctly checked for -ve value
  Revert "sit: reload iphdr in ipip6_rcv"
  i40e/i40evf: proper update of the page_offset field
  i40e: Fix state flags for bit set and clean operations of PF
  iwlwifi: fix host command memory leaks
  iwlwifi: fix min API version for 7265D, 3168, 8000 and 8265
  iwlwifi: mvm: clear new beacon command template struct
  iwlwifi: mvm: don't fail when removing a key from an inexisting sta
  iwlwifi: pcie: only use d0i3 in suspend/resume if system_pm is set to d0i3
  iwlwifi: mvm: fix firmware debug restart recording
  iwlwifi: tt: move ucode_loaded check under mutex
  iwlwifi: mvm: support ibss in dqa mode
  iwlwifi: mvm: Fix command queue number on d0i3 flow
  iwlwifi: mvm: rs: start using LQ command color
  ...

Merge git://git./linux/kernel/git/davem/sparc

Pull sparc fixes from David Miller:

1) Fix TLB context wrap races, from Pavel Tatashin.

2) Cure some gcc-7 build issues.

3) Handle invalid setup_hugepagesz command line values properly, from
    Liam R Howlett.

4) Copy TSB using the correct address shift for the huge TSB, from Mike
    Kravetz.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: delete old wrap code
  sparc64: new context wrap
  sparc64: add per-cpu mm of secondary contexts
  sparc64: redefine first version
  sparc64: combine activate_mm and switch_mm
  sparc64: reset mm cpumask after wrap
  sparc/mm/hugepages: Fix setup_hugepagesz for invalid values.
  sparc: Machine description indices can vary
  sparc64: mm: fix copy_tsb to correctly copy huge page TSBs
  arch/sparc: support NR_CPUS = 4096
  sparc64: Add __multi3 for gcc 7.x and later.
  sparc64: Fix build warnings with gcc 7.
  arch/sparc: increase CONFIG_NODES_SHIFT on SPARC64 to 5

compiler, clang: suppress warning for unused static inline functions

GCC explicitly does not warn for unused static inline functions for
-Wunused-function. The manual states:

Warn whenever a static function is declared but not defined or
a non-inline static function is unused.

Clang does warn for static inline functions that are unused.

It turns out that suppressing the warnings avoids potentially complex
#ifdef directives, which also reduces LOC.

Suppress the warning for clang.

Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'sparc64-context-wrap-fixes'

Pavel Tatashin says:

====================
sparc64: context wrap fixes

This patch series contains fixes for context wrap: when we are out of
context ids, and need to get a new version.

It fixes memory corruption issues which happen when more than number of
context ids (currently set to 8K) number of processes are started
simultaneously, and processes can get a wrong context.

sparc64: new context wrap:
- contains explanation of new wrap method, and also explanation of races
that it solves
sparc64: reset mm cpumask after wrap
- explains issue of not reseting cpu mask on a wrap
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

sparc64: delete old wrap code

The old method that is using xcall and softint to get new context id is
deleted, as it is replaced by a method of using per_cpu_secondary_mm
without xcall to perform the context wrap.

Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Reviewed-by: Bob Picco <bob.picco@oracle.com>
Reviewed-by: Steven Sistare <steven.sistare@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sparc64: new context wrap

The current wrap implementation has a race issue: it is called outside of
the ctx_alloc_lock, and also does not wait for all CPUs to complete the
wrap.  This means that a thread can get a new context with a new version
and another thread might still be running with the same context. The
problem is especially severe on CPUs with shared TLBs, like sun4v. I used
the following test to very quickly reproduce the problem:
- start over 8K processes (must be more than context IDs)
- write and read values at a  memory location in every process.

Very quickly memory corruptions start happening, and what we read back
does not equal what we wrote.

Several approaches were explored before settling on this one:

Approach 1:
Move smp_new_mmu_context_version() inside ctx_alloc_lock, and wait for
every process to complete the wrap. (Note: every CPU must WAIT before
leaving smp_new_mmu_context_version_client() until every one arrives).

This approach ends up with deadlocks, as some threads own locks which other
threads are waiting for, and they never receive softint until these threads
exit smp_new_mmu_context_version_client(). Since we do not allow the exit,
deadlock happens.

Approach 2:
Handle wrap right during mondo interrupt. Use etrap/rtrap to enter into
into C code, and issue new versions to every CPU.
This approach adds some overhead to runtime: in switch_mm() we must add
some checks to make sure that versions have not changed due to wrap while
we were loading the new secondary context. (could be protected by PSTATE_IE
but that degrades performance as on M7 and older CPUs as it takes 50 cycles
for each access). Also, we still need a global per-cpu array of MMs to know
where we need to load new contexts, otherwise we can change context to a
thread that is going way (if we received mondo between switch_mm() and
switch_to() time). Finally, there are some issues with window registers in
rtrap() when context IDs are changed during CPU mondo time.

The approach in this patch is the simplest and has almost no impact on
runtime.  We use the array with mm's where last secondary contexts were
loaded onto CPUs and bump their versions to the new generation without
changing context IDs. If a new process comes in to get a context ID, it
will go through get_new_mmu_context() because of version mismatch. But the
running processes do not need to be interrupted. And wrap is quicker as we
do not need to xcall and wait for everyone to receive and complete wrap.

Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Reviewed-by: Bob Picco <bob.picco@oracle.com>
Reviewed-by: Steven Sistare <steven.sistare@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sparc64: add per-cpu mm of secondary contexts

The new wrap is going to use information from this array to figure out
mm's that currently have valid secondary contexts setup.

Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Reviewed-by: Bob Picco <bob.picco@oracle.com>
Reviewed-by: Steven Sistare <steven.sistare@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sparc64: redefine first version

CTX_FIRST_VERSION defines the first context version, but also it defines
first context. This patch redefines it to only include the first context
version.

Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Reviewed-by: Bob Picco <bob.picco@oracle.com>
Reviewed-by: Steven Sistare <steven.sistare@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sparc64: combine activate_mm and switch_mm

The only difference between these two functions is that in activate_mm we
unconditionally flush context. However, there is no need to keep this
difference after fixing a bug where cpumask was not reset on a wrap. So, in
this patch we combine these.

Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Reviewed-by: Bob Picco <bob.picco@oracle.com>
Reviewed-by: Steven Sistare <steven.sistare@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sparc64: reset mm cpumask after wrap

After a wrap (getting a new context version) a process must get a new
context id, which means that we would need to flush the context id from
the TLB before running for the first time with this ID on every CPU. But,
we use mm_cpumask to determine if this process has been running on this CPU
before, and this mask is not reset after a wrap. So, there are two possible
fixes for this issue:

1. Clear mm cpumask whenever mm gets a new context id
2. Unconditionally flush context every time process is running on a CPU

This patch implements the first solution

Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Reviewed-by: Bob Picco <bob.picco@oracle.com>
Reviewed-by: Steven Sistare <steven.sistare@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sparc/mm/hugepages: Fix setup_hugepagesz for invalid values.

hugetlb_bad_size needs to be called on invalid values. Also change the
pr_warn to a pr_err to better align with other platforms.

Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sparc: Machine description indices can vary

VIO devices were being looked up by their index in the machine
description node block, but this often varies over time as devices are
added and removed. Instead, store the ID and look up using the type,
config handle and ID.

Signed-off-by: James Clarke <jrtc27@jrtc27.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=112541
Signed-off-by: David S. Miller <davem@davemloft.net>

sparc64: mm: fix copy_tsb to correctly copy huge page TSBs

When a TSB grows beyond its current capacity, a new TSB is allocated
and copy_tsb is called to copy entries from the old TSB to the new.
A hash shift based on page size is used to calculate the index of an
entry in the TSB.  copy_tsb has hard coded PAGE_SHIFT in these
calculations.  However, for huge page TSBs the value REAL_HPAGE_SHIFT
should be used.  As a result, when copy_tsb is called for a huge page
TSB the entries are placed at the incorrect index in the newly
allocated TSB.  When doing hardware table walk, the MMU does not
match these entries and we end up in the TSB miss handling code.
This code will then create and write an entry to the correct index
in the TSB.  We take a performance hit for the table walk miss and
recreation of these entries.

Pass a new parameter to copy_tsb that is the page size shift to be
used when copying the TSB.

Suggested-by: Anthony Yznaga <anthony.yznaga@oracle.com>
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

arch/sparc: support NR_CPUS = 4096

Linux SPARC64 limits NR_CPUS to 4064 because init_cpu_send_mondo_info()
only allocates a single page for NR_CPUS mondo entries. Thus we cannot
use all 4096 CPUs on some SPARC platforms.

To fix, allocate (2^order) pages where order is set according to the size
of cpu_list for possible cpus. Since cpu_list_pa and cpu_mondo_block_pa
are not used in asm code, there are no imm13 offsets from the base PA
that will break because they can only reach one page.

Orabug: 25505750

Signed-off-by: Jane Chu <jane.chu@oracle.com>
Reviewed-by: Bob Picco <bob.picco@oracle.com>
Reviewed-by: Atish Patra <atish.patra@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: fix a broken u32 less than zero check

The check that queue is less or equal to zero is always true
because queue is a u32; queue is decremented and will wrap around
and never go -ve. Fix this by making queue an int.

Detected by CoverityScan, CID#1428988 ("Unsigned compared against 0")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: fix completely hung TX when using TSO

stmmac_tso_allocator can fail to set the Last Descriptor bit
on a descriptor that actually was the last descriptor.

This happens when the buffer of the last descriptor ends
up having a size of exactly TSO_MAX_BUFF_SIZE.

When the IP eventually reaches the next last descriptor,
which actually has the bit set, the DMA will hang.

When the DMA hangs, we get a tx timeout, however,
since stmmac does not do a complete reset of the IP
in stmmac_tx_timeout, we end up in a state with
completely hung TX.

Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethoc: enable NAPI before poll may be scheduled

ethoc_reset enables device interrupts, ethoc_interrupt may schedule a
NAPI poll before NAPI is enabled in the ethoc_open, which results in
device being unable to send or receive anything until it's closed and
reopened. In case the device is flooded with ingress packets it may be
unable to recover at all.
Move napi_enable above ethoc_reset in the ethoc_open to fix that.

Fixes: a1702857724f ("net: Add support for the OpenCores 10/100 Mbps Ethernet MAC.")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Tobias Klauser <tklauser@distanz.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: bridge: fix a null pointer dereference in br_afspec

We might call br_afspec() with p == NULL which is a valid use case if
the action is on the bridge device itself, but the bridge tunnel code
dereferences the p pointer without checking, so check if p is null
first.

Reported-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Fixes: efa5356b0d97 ("bridge: per vlan dst_metadata netlink support")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ravb: Fix use-after-free on `ifconfig eth0 down`

Commit a47b70ea86bd ("ravb: unmap descriptors when freeing rings") has
introduced the issue seen in [1] reproduced on H3ULCB board.

Fix this by relocating the RX skb ringbuffer free operation, so that
swiotlb page unmapping can be done first. Freeing of aligned TX buffers
is not relevant to the issue seen in [1]. Still, reposition TX free
calls as well, to have all kfree() operations performed consistently
_after_ dma_unmap_*()/dma_free_*().

[1] Console screenshot with the problem reproduced:

salvator-x login: root
root@salvator-x:~# ifconfig eth0 up
Micrel KSZ9031 Gigabit PHY e6800000.ethernet-ffffffff:00: \
       attached PHY driver [Micrel KSZ9031 Gigabit PHY]   \
       (mii_bus:phy_addr=e6800000.ethernet-ffffffff:00, irq=235)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
root@salvator-x:~#
root@salvator-x:~# ifconfig eth0 down

==================================================================
BUG: KASAN: use-after-free in swiotlb_tbl_unmap_single+0xc4/0x35c
Write of size 1538 at addr ffff8006d884f780 by task ifconfig/1649

CPU: 0 PID: 1649 Comm: ifconfig Not tainted 4.12.0-rc4-00004-g112eb07287d1 #32
Hardware name: Renesas H3ULCB board based on r8a7795 (DT)
Call trace:
[<ffff20000808f11c>] dump_backtrace+0x0/0x3a4
[<ffff20000808f4d4>] show_stack+0x14/0x1c
[<ffff20000865970c>] dump_stack+0xf8/0x150
[<ffff20000831f8b0>] print_address_description+0x7c/0x330
[<ffff200008320010>] kasan_report+0x2e0/0x2f4
[<ffff20000831eac0>] check_memory_region+0x20/0x14c
[<ffff20000831f054>] memcpy+0x48/0x68
[<ffff20000869ed50>] swiotlb_tbl_unmap_single+0xc4/0x35c
[<ffff20000869fcf4>] unmap_single+0x90/0xa4
[<ffff20000869fd14>] swiotlb_unmap_page+0xc/0x14
[<ffff2000080a2974>] __swiotlb_unmap_page+0xcc/0xe4
[<ffff2000088acdb8>] ravb_ring_free+0x514/0x870
[<ffff2000088b25dc>] ravb_close+0x288/0x36c
[<ffff200008aaf8c4>] __dev_close_many+0x14c/0x174
[<ffff200008aaf9b4>] __dev_close+0xc8/0x144
[<ffff200008ac2100>] __dev_change_flags+0xd8/0x194
[<ffff200008ac221c>] dev_change_flags+0x60/0xb0
[<ffff200008ba2dec>] devinet_ioctl+0x484/0x9d4
[<ffff200008ba7b78>] inet_ioctl+0x190/0x194
[<ffff200008a78c44>] sock_do_ioctl+0x78/0xa8
[<ffff200008a7a128>] sock_ioctl+0x110/0x3c4
[<ffff200008365a70>] vfs_ioctl+0x90/0xa0
[<ffff200008365dbc>] do_vfs_ioctl+0x148/0xc38
[<ffff2000083668f0>] SyS_ioctl+0x44/0x74
[<ffff200008083770>] el0_svc_naked+0x24/0x28

The buggy address belongs to the page:
page:ffff7e001b6213c0 count:0 mapcount:0 mapping:          (null) index:0x0
flags: 0x4000000000000000()
raw: 4000000000000000 0000000000000000 0000000000000000 00000000ffffffff
raw: 0000000000000000 ffff7e001b6213e0 0000000000000000 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
ffff8006d884f680: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff8006d884f700: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>ffff8006d884f780: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
                   ^
ffff8006d884f800: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff8006d884f880: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
==================================================================
Disabling lock debugging due to kernel taint
root@salvator-x:~#

Fixes: a47b70ea86bd ("ravb: unmap descriptors when freeing rings")
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/ipv6: Fix CALIPSO causing GPF with datagram support

When using CALIPSO with IPPROTO_UDP it is possible to trigger a GPF as the
IP header may have moved.

Also update the payload length after adding the CALIPSO option.

Signed-off-by: Richard Haines <richard_c_haines@btinternet.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Huw Davies <huw@codeweavers.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: ensure jumbo_frm error return is correctly checked for -ve value

The current comparison of entry < 0 will never be true since entry is an
unsigned integer. Make entry an int to ensure -ve error return values
from the call to jumbo_frm are correctly being caught.

Detected by CoverityScan, CID#1238760 ("Macro compares unsigned to 0")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'asoc-fix-v4.12-rc4' of git://git./linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v4.12

This is the usual collection of device specific fixes, all accumilated
since the merge window, plus one fix from Takashi for a nasty use after
free bug that bit some things with deferred probe and an update to the
maintainer address for the former Wolfson parts.

elevator: fix truncation of icq_cache_name

gcc 7.1 reports the following warning:

    block/elevator.c: In function ‘elv_register’:
    block/elevator.c:898:5: warning: ‘snprintf’ output may be truncated before the last format character [-Wformat-truncation=]
         "%s_io_cq", e->elevator_name);
         ^~~~~~~~~~
    block/elevator.c:897:3: note: ‘snprintf’ output between 7 and 22 bytes into a destination of size 21
       snprintf(e->icq_cache_name, sizeof(e->icq_cache_name),
       ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
         "%s_io_cq", e->elevator_name);
         ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

The bug is that the name of the icq_cache is 6 characters longer than
the elevator name, but only ELV_NAME_MAX + 5 characters were reserved
for it --- so in the case of a maximum-length elevator name, the 'q'
character in "_io_cq" would be truncated by snprintf().  Fix it by
reserving ELV_NAME_MAX + 6 characters instead.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

Merge tag 'wireless-drivers-for-davem-2017-06-06' of git://git./linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
wireless-drivers fixes for 4.12

It has been a slow start of cycle and this the first set of fixes for
4.12. Nothing really major here.

wcn36xx

* fix an issue with module reload

brcmfmac

* fix aligment regression on 64 bit systems

iwlwifi

* fixes for memory leaks, runtime PM, memory initialisation and other
smaller problems

* fix IBSS on devices using DQA mode (7260 and up)

* fix the minimum firmware API requirement for 7265D, 3168, 8000 and
8265
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'media/v4.12-2' of git://git./linux/kernel/git/mchehab/linux-media

Pull media fixes from Mauro Carvalho Chehab:
"Some bug fixes:

   - Don't fail build if atomisp has warnings

   - Some CEC Kconfig changes to allow it to be used by DRM without
     media dependencies

   - A race fix at RC initialization code

   - A driver fix at rainshadow-cec

  IMHO, the one that affects most people in this series is a build fix:
  if you try to build the Kernel with W=1 or using gcc7 and
  all[yes|mod]config, build will fail due to -Werror at atomisp
  makefiles"

* tag 'media/v4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] rc-core: race condition during ir_raw_event_register()
  [media] cec: drop MEDIA_CEC_DEBUG
  [media] cec: rename MEDIA_CEC_NOTIFIER to CEC_NOTIFIER
  [media] cec: select CEC_CORE instead of depend on it
  [media] rainshadow-cec: ensure exit_loop is intialized
  [media] atomisp: don't treat warnings as errors

Merge branch '40GbE' of git://git./linux/kernel/git/jkirsher/net-queue

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2017-06-06

This series contains fixes to i40e and i40evf only.

Mauro S. M. Rodrigues fixes a flood in the kernel log which was introduced
in a previous commit because of a mistaken substitution of __I40E_VSI_DOWN
instead of __I40E_DOWN when testing the state of the PF.

Björn Töpel fixes an issue introduced in a previous commit where the
offset was incorrect and could lead to data corruption for architectures
using PAGE_SIZE larger than 8191. Fixed the issue by updating the
page_offset correctly using the proper setting for truesize.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

blk-mq: fix direct issue

If queue is stopped, we shouldn't dispatch request into driver and
hardware, unfortunately the check is removed in bd166ef183c2(blk-mq-sched:
add framework for MQ capable IO schedulers).

This patch fixes the issue by moving the check back into
__blk_mq_try_issue_directly().

This patch fixes request use-after-free[1][2] during canceling requets
of NVMe in nvme_dev_disable(), which can be triggered easily during
NVMe reset & remove test.

[1] oops kernel log when CONFIG_BLK_DEV_INTEGRITY is on
[  103.412969] BUG: unable to handle kernel NULL pointer dereference at 000000000000000a
[  103.412980] IP: bio_integrity_advance+0x48/0xf0
[  103.412981] PGD 275a88067
[  103.412981] P4D 275a88067
[  103.412982] PUD 276c43067
[  103.412983] PMD 0
[  103.412984]
[  103.412986] Oops: 0000 [#1] SMP
[  103.412989] Modules linked in: vfat fat intel_rapl sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel crypto_simd cryptd ipmi_ssif iTCO_wdt iTCO_vendor_support mxm_wmi glue_helper dcdbas ipmi_si mei_me pcspkr mei sg ipmi_devintf lpc_ich ipmi_msghandler shpchp acpi_power_meter wmi nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c sd_mod mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm crc32c_intel nvme ahci nvme_core libahci libata tg3 i2c_core megaraid_sas ptp pps_core dm_mirror dm_region_hash dm_log dm_mod
[  103.413035] CPU: 0 PID: 102 Comm: kworker/0:2 Not tainted 4.11.0+ #1
[  103.413036] Hardware name: Dell Inc. PowerEdge R730xd/072T6D, BIOS 2.2.5 09/06/2016
[  103.413041] Workqueue: events nvme_remove_dead_ctrl_work [nvme]
[  103.413043] task: ffff9cc8775c8000 task.stack: ffffc033c252c000
[  103.413045] RIP: 0010:bio_integrity_advance+0x48/0xf0
[  103.413046] RSP: 0018:ffffc033c252fc10 EFLAGS: 00010202
[  103.413048] RAX: 0000000000000000 RBX: ffff9cc8720a8cc0 RCX: ffff9cca72958240
[  103.413049] RDX: ffff9cca72958000 RSI: 0000000000000008 RDI: ffff9cc872537f00
[  103.413049] RBP: ffffc033c252fc28 R08: 0000000000000000 R09: ffffffffb963a0d5
[  103.413050] R10: 000000000000063e R11: 0000000000000000 R12: ffff9cc8720a8d18
[  103.413051] R13: 0000000000001000 R14: ffff9cc872682e00 R15: 00000000fffffffb
[  103.413053] FS:  0000000000000000(0000) GS:ffff9cc877c00000(0000) knlGS:0000000000000000
[  103.413054] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  103.413055] CR2: 000000000000000a CR3: 0000000276c41000 CR4: 00000000001406f0
[  103.413056] Call Trace:
[  103.413063]  bio_advance+0x2a/0xe0
[  103.413067]  blk_update_request+0x76/0x330
[  103.413072]  blk_mq_end_request+0x1a/0x70
[  103.413074]  blk_mq_dispatch_rq_list+0x370/0x410
[  103.413076]  ? blk_mq_flush_busy_ctxs+0x94/0xe0
[  103.413080]  blk_mq_sched_dispatch_requests+0x173/0x1a0
[  103.413083]  __blk_mq_run_hw_queue+0x8e/0xa0
[  103.413085]  __blk_mq_delay_run_hw_queue+0x9d/0xa0
[  103.413088]  blk_mq_start_hw_queue+0x17/0x20
[  103.413090]  blk_mq_start_hw_queues+0x32/0x50
[  103.413095]  nvme_kill_queues+0x54/0x80 [nvme_core]
[  103.413097]  nvme_remove_dead_ctrl_work+0x1f/0x40 [nvme]
[  103.413103]  process_one_work+0x149/0x360
[  103.413105]  worker_thread+0x4d/0x3c0
[  103.413109]  kthread+0x109/0x140
[  103.413111]  ? rescuer_thread+0x380/0x380
[  103.413113]  ? kthread_park+0x60/0x60
[  103.413120]  ret_from_fork+0x2c/0x40
[  103.413121] Code: 08 4c 8b 63 50 48 8b 80 80 00 00 00 48 8b 90 d0 03 00 00 31 c0 48 83 ba 40 02 00 00 00 48 8d 8a 40 02 00 00 48 0f 45 c1 c1 ee 09 <0f> b6 48 0a 0f b6 40 09 41 89 f5 83 e9 09 41 d3 ed 44 0f af e8
[  103.413145] RIP: bio_integrity_advance+0x48/0xf0 RSP: ffffc033c252fc10
[  103.413146] CR2: 000000000000000a
[  103.413157] ---[ end trace cd6875d16eb5a11e ]---
[  103.455368] Kernel panic - not syncing: Fatal exception
[  103.459826] Kernel Offset: 0x37600000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
[  103.850916] ---[ end Kernel panic - not syncing: Fatal exception
[  103.857637] sched: Unexpected reschedule of offline CPU#1!
[  103.863762] ------------[ cut here ]------------

[2] kernel hang in blk_mq_freeze_queue_wait() when CONFIG_BLK_DEV_INTEGRITY is off
[  247.129825] INFO: task nvme-test:1772 blocked for more than 120 seconds.
[  247.137311]       Not tainted 4.12.0-rc2.upstream+ #4
[  247.142954] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  247.151704] Call Trace:
[  247.154445]  __schedule+0x28a/0x880
[  247.158341]  schedule+0x36/0x80
[  247.161850]  blk_mq_freeze_queue_wait+0x4b/0xb0
[  247.166913]  ? remove_wait_queue+0x60/0x60
[  247.171485]  blk_freeze_queue+0x1a/0x20
[  247.175770]  blk_cleanup_queue+0x7f/0x140
[  247.180252]  nvme_ns_remove+0xa3/0xb0 [nvme_core]
[  247.185503]  nvme_remove_namespaces+0x32/0x50 [nvme_core]
[  247.191532]  nvme_uninit_ctrl+0x2d/0xa0 [nvme_core]
[  247.196977]  nvme_remove+0x70/0x110 [nvme]
[  247.201545]  pci_device_remove+0x39/0xc0
[  247.205927]  device_release_driver_internal+0x141/0x200
[  247.211761]  device_release_driver+0x12/0x20
[  247.216531]  pci_stop_bus_device+0x8c/0xa0
[  247.221104]  pci_stop_and_remove_bus_device_locked+0x1a/0x30
[  247.227420]  remove_store+0x7c/0x90
[  247.231320]  dev_attr_store+0x18/0x30
[  247.235409]  sysfs_kf_write+0x3a/0x50
[  247.239497]  kernfs_fop_write+0xff/0x180
[  247.243867]  __vfs_write+0x37/0x160
[  247.247757]  ? selinux_file_permission+0xe5/0x120
[  247.253011]  ? security_file_permission+0x3b/0xc0
[  247.258260]  vfs_write+0xb2/0x1b0
[  247.261964]  ? syscall_trace_enter+0x1d0/0x2b0
[  247.266924]  SyS_write+0x55/0xc0
[  247.270540]  do_syscall_64+0x67/0x150
[  247.274636]  entry_SYSCALL64_slow_path+0x25/0x25
[  247.279794] RIP: 0033:0x7f5c96740840
[  247.283785] RSP: 002b:00007ffd00e87ee8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[  247.292238] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f5c96740840
[  247.300194] RDX: 0000000000000002 RSI: 00007f5c97060000 RDI: 0000000000000001
[  247.308159] RBP: 00007f5c97060000 R08: 000000000000000a R09: 00007f5c97059740
[  247.316123] R10: 0000000000000001 R11: 0000000000000246 R12: 00007f5c96a14400
[  247.324087] R13: 0000000000000002 R14: 0000000000000001 R15: 0000000000000000
[  370.016340] INFO: task nvme-test:1772 blocked for more than 120 seconds.

Fixes: 12d70958a2e8(blk-mq: don't fail allocating driver tag for stopped hw queue)
Cc: stable@vger.kernel.org
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

blk-mq: pass correct hctx to blk_mq_try_issue_directly

When direct issue is done on request picked up from plug list,
the hctx need to be updated with the actual hw queue, otherwise
wrong hctx is used and may hurt performance, especially when
wrong SRCU readlock is acquired/released

Reported-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

Revert "sit: reload iphdr in ipip6_rcv"

This reverts commit b699d0035836f6712917a41e7ae58d84359b8ff9.

As per Eric Dumazet, the pskb_may_pull() is a NOP in this
particular case, so the 'iph' reload is unnecessary.

Signed-off-by: David S. Miller <davem@davemloft.net>

drm: kirin: Fix drm_of_find_panel_or_bridge conversion

This fixes a regression introduced by ebc944613567 ("drm:
convert drivers to use drm_of_find_panel_or_bridge") that was
recently merged, causing HDMI output to not work.

For the kirin driver, the port value should be 1 instead of 0,
so this oneline patch fixes it and gets graphics working again.

Cc: Rob Herring <robh@kernel.org>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Xinliang Liu <xinliang.liu@linaro.org>
Fix-suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Xinliang Liu <xinliang.liu@linaro.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1495557626-25285-1-git-send-email-john.stultz@linaro.org

powerpc/perf: Fix Power9 test_adder fields

Commit 8d911904f3ce4 ('powerpc/perf: Add restrictions to PMC5 in power9 DD1')
was added to restrict the use of PMC5 in Power9 DD1. Intention was to disable
the use of PMC5 using raw event code. But instead of updating the
power9_isa207_pmu structure (used on DD1), the commit incorrectly updated the
power9_pmu structure. Fix it.

Fixes: 8d911904f3ce ("powerpc/perf: Add restrictions to PMC5 in power9 DD1")
Reported-by: Shriya <shriyak@linux.vnet.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Tested-by: Shriya <shriyak@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>